advertisement
H M 8 0 1 4
HZ19 Test tweezers
HZ17 Test lead (included)
Measurement ranges from 200 mΩ to 20 kΩ
Resolution 100 µΩ, basic accuracy 0.25 %
4-wire Kelvin measurement
Low measurement voltages from 4 mV to 200 mV
Low measurement current from 10 µA to 20 mA
Mainframe HM8001-2 required for operation
HZ18 Kelvin test lead
Valid at 23 °C after a 30 minute warm-up period
Operating mode
Milliohm measurement
Diode testing
Milliohm measurement
Measurement ranges:
Type of measurement:
Resolution:
Accuracy:
200 mΩ-20 kΩ (6 ranges)
4-wire measurement (Kelvin test lead) max. 0.1 mΩ
200 mΩ-20 Ω: 0.25 % of reading ± 2 digits
200 Ω - 20 kΩ: 0.25 % of reading ± 1 digit
Measurement voltage and current:
Range max. voltage 1) Current Test voltage
200 mΩ
2 Ω
20 Ω
200 Ω
2000 Ω
20 kΩ
6mV
6mV
6mV
300 mV
300 mV
300 mV
20 mA
2 mA
0.2 mA
1 mA
100 µA
10 µA
4 mV
4 mV
4 mV
200 mV
200 mV
200 mV
Max. permissible input voltage: ± 30 V
Diode testing
Voltage measurement range: 1999 mV
Accuracy: 0.25 % of reading ± 1 digit
Measurement voltage and current:
Range max. voltage 1) Current
1999 mV
1999 mV
3 V
3 V
20 mA
2 mA
1999 mV 3 V 200 µA
Currents can be selected using pushbuttons
Test voltage
2 V
2 V
2 V
Max. permissible input voltage: ± 30 V
Display
3 1 /
2
-digit 7-segment LED display
Sampling rate: 3 measurements per second
Miscellaneous
A built-in loudspeaker emits acoustic signals at different pitches depending on the size of the measured resistance.
Volume adjustable.
Output power: 250 mW
When headphones are used, the loudspeaker is automatically deactivated.
Zero calibration on the front panel.
Power supply (from mainframe): + 5 V/250 mA
+7.5 V/60 mA
- 5 V/60 mA
(∑= 2.45 W)
Operating temperature:
Max. relative humidity:
+10° C to + 40° C
80 % (without condensation)
Dimensions (W x H x D) (without 22-pole flat plug):
135 x 68 x 228 mm
Weight: approx. 0.65 kg
1) without load
Accessories supplied: Operator’s Manual, HZ17 4-wire test lead
Optional accessories: HZ19 test tweezers, HZ18 Kelvin test lead w w w . h a m e g . c o m
HM8014E/140705/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · [email protected]
A Rohde & Schwarz Company
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project