Pioneer BDP-X300 Blu-ray Disc Players/DVD Player Operating Instructions

Add to my manuals
64 Pages

advertisement

Pioneer BDP-X300 Blu-ray Disc Players/DVD Player Operating Instructions | Manualzz
BDP-X300_72-BDPX300-GBRB1_En.book
1 ページ
2016年8月8日 月曜日 午後3時16分
BDP-X300
Blu-ray 3DTM PLAYER
For customers in Europe:
Discover the benefits of registering your product online at
http://www.pioneer-audiovisual.eu/
Download an electronic version of this manual from our website.
Operating Instructions
BDP-X300_72-BDPX300-GBRB1_En.book
2 ページ
2016年8月8日 月曜日 午後3時16分
Thank you for buying this Pioneer product. Please read through these operating instructions so you
will know how to operate your model properly. After you have finished reading the instructions, put
them away in a safe place for future reference.
CAUTION
Operating Environment
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight
(or strong artificial light)
D3-4-2-1-1_B1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007,
but this product contains a laser diode higher than
Class 1. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside of
the product.
Refer all servicing to qualified personnel.
D3-4-2-1-7c*_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
CLASS 1 LASER PRODUCT
The following caution label appears on your unit.
Location: inside of the unit
D58-5-2-2b*_B1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at
each side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
(for example, when on vacation).
D3-4-2-2-2a*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period.
K041_A1_En
BDP-X300_72-BDPX300-GBRB1_En.book
3 ページ
2016年8月8日 月曜日 午後3時16分
POWER-CORD CAUTION
Condensation
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that
they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electrical shock.
Check the power cord once in a while. When you find
it damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the
temperature in the room in which the player is installed
rises suddenly due to a heater, etc., water droplets
(condensation) may form inside (on operating parts and
the lens). When condensation is present, the player will
not operate properly and playback is not possible. Let
the player stand at room temperature for 1 or 2 hours
with the power turned on (the time depends on the
extent of condensation). The water droplets will
dissipate and playback will become possible.
Condensation can also occur in the summer if the
player is exposed to the direct wind from an
air-conditioner. If this happens, move the player to a
different place.
S002*_A1_En
[Taiwan model only]
S005_A1_En
Taiwanese two pin flat-bladed plug
K056_A1_En
[European model only]
Information for users on collection and disposal of old equipment and used batteries
Symbol for
equipment
These symbols on the products, packaging, and/or accompanying documents mean
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
Symbol examples
for batteries
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
Pb
K058a_A1_En
Cautions on 3D Viewing
• If you should experience any fatigue or discomfort while viewing 3D images, stop viewing them.
• Children, particularly those under 6, may be more prone to sensitivity, so guardians should watch for
any signs of fatigue or discomfort.
• When viewing 3D images, rest periodically.
Extended viewing of 3D images without rest periods could cause fatigue or discomfort.
BDP-X300_72-BDPX300-GBRB1_En.book
4 ページ
2016年8月8日 月曜日 午後3時16分
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Putting the batteries in the remote control . . . . . . . . . . . . 5
Software Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About operation of this player from a mobile device
(iPod, iPhone, iPad etc.). . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Types of discs/files that can be played. . . . . . . . . . . . . . . . 7
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Part Names and Functions. . . . . . . . . . . . . . . . . . . . . . . . 13
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
02 Connecting up
Connecting using an HDMI cable. . . . . . . . . . . . . . . . . . . 15
About HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
About Control Function with HDMI . . . . . . . . . . . . . . . . 16
Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting an AV receiver or amplifier . . . . . . . . . . . . . 17
Connecting audio cables . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting an AV receiver or amplifier using a digital
audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting components to the USB port . . . . . . . . . . . . . 18
About USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting the USB device. . . . . . . . . . . . . . . . . . . . . . 18
Connecting to the network through LAN interface . . . . . . 19
Connecting with a LAN cable (wired LAN). . . . . . . . . . . 19
Connecting to a wireless LAN . . . . . . . . . . . . . . . . . . . . 19
Connecting the power cord . . . . . . . . . . . . . . . . . . . . . . . 19
03 Getting Started
Making settings using the Setup Navigator menu . . . . . . 20
Switching the output video resolution. . . . . . . . . . . . . . . . 21
04 Playback
Playing discs or files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Forward and reverse scanning . . . . . . . . . . . . . . . . . . . 23
Playing specific chapters, tracks or files . . . . . . . . . . . . 23
Skipping content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To return to a position a short while ago . . . . . . . . . . . . 23
To advance to a position slightly ahead. . . . . . . . . . . . . 23
Slow playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Reverse slow playback . . . . . . . . . . . . . . . . . . . . . . . . . 23
Step forward and step reverse. . . . . . . . . . . . . . . . . . . . 23
Playing a specific section within a title or
track repeatedly (A-B Repeat) . . . . . . . . . . . . . . . . . . . . 24
Playing repeatedly
(Repeat Play). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Playing in the desired order (Programmed Play). . . . . . 24
Making bookmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Playing photos as slideshows . . . . . . . . . . . . . . . . . . . . 25
Switching the camera angles. . . . . . . . . . . . . . . . . . . . . 25
Switching the subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Moving subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Switching the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Switching the CD/SACD playback area. . . . . . . . . . . . . 26
Displaying the disc information . . . . . . . . . . . . . . . . . . . 26
Enjoying BONUSVIEW or BD-LIVE. . . . . . . . . . . . . . . . 26
Playback functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Using the FUNCTION menu. . . . . . . . . . . . . . . . . . . . . . . 28
Playing from a specific time (Time Search) . . . . . . . . . . 29
Playing a specific title, chapter, track or file
(Search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Playing specified range of discs, titles or
chapter (track/file) in random order . . . . . . . . . . . . . . . . 29
4
En
Continuing playback from a specified position
(Continued Viewing Playback) . . . . . . . . . . . . . . . . . . . . 29
Changing the Video options . . . . . . . . . . . . . . . . . . . . . 30
Using the HQ Sound function. . . . . . . . . . . . . . . . . . . . 30
05 Playback from Source function
About Source function. . . . . . . . . . . . . . . . . . . . . . . . . . .
About network playback . . . . . . . . . . . . . . . . . . . . . . . .
Playback file on the network . . . . . . . . . . . . . . . . . . . . . .
Disc/USB playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing back image files. . . . . . . . . . . . . . . . . . . . . . . .
Playing in the desired order (Playlist) . . . . . . . . . . . . . . .
Adding tracks/files . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing the Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting tracks/files from the Playlist . . . . . . . . . . . . . .
TM
TM
31
31
32
32
33
33
33
33
33
About MiracastTM/Wi-Fi DirectTM . . . . . . . . . . . . . . . . . .
About Wi-Fi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use the unit’s Miracast/Wi-Fi Direct functions . . . . . . .
Display the Miracast/Wi-Fi Direct mode screen . . . . . .
Connecting by Miracast . . . . . . . . . . . . . . . . . . . . . . . .
Connect to device not compatible with Miracast/Wi-Fi
Direct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting by WPS . . . . . . . . . . . . . . . . . . . . . . . . . . .
Change SSID and password . . . . . . . . . . . . . . . . . . . .
Canceling the Miracast/Wi-Fi Direct connection. . . . . .
Playing a mobile device’s photos, music or video
files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34
34
34
34
35
06 Connecting by Miracast
/Wi-Fi Direct
07 Advanced settings
Changing the settings . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the Initial Setup screen . . . . . . . . . . . . . . . .
WPS setup (Wi-Fi Protected Setup) . . . . . . . . . . . . . . . .
WPS connection setting . . . . . . . . . . . . . . . . . . . . . . . .
Wireless network connection . . . . . . . . . . . . . . . . . . . . .
Wireless network setup . . . . . . . . . . . . . . . . . . . . . . . .
Software updating . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring all the settings to the factory default
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About how digital audio formats are output. . . . . . . . . . .
08 Additional information
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Moving the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Place of installation . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turn the power off when not using the player . . . . . . .
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the player . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution for when the unit is installed in a rack with
a glass door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the pickup lens . . . . . . . . . . . . . . . . . . . . . . .
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
36
36
37
37
38
38
43
43
44
44
45
46
47
48
48
48
48
48
48
48
49
49
50
50
53
53
56
57
59
61
BDP-X300_72-BDPX300-GBRB1_En.book
5 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 1
01
Before you start
What’s in the box
• Remote control x 1
• AAA/R03 size manganese batteries x 2
• Power cord
• Warranty card (European models only) x 1
• Operating instructions (this document) x 1
Putting the batteries in the
remote control
The batteries included with the player have been
provided to allow you to check product operation and
may not last long. We recommend using alkaline
batteries that have a longer life.
1
Open the rear cover.
2 Insert (2 x AAA/R03 size) batteries that are
supplied.
Insert first from the
side.
WARNING
• Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce the
life or performance of batteries.
3 Close the rear cover.
Close securely (a click should be heard).
Caution
• Do not use a new battery together with an old one.
∫ How to use the remote controller
• When loading the batteries into the remote control,
set them in the proper direction, as indicated by the
polarity marks (
and
).
Remote control
sensor
• When inserting the batteries, make sure not to
damage the springs on the battery’s
terminals.
This can cause batteries to leak or overheat.
Approximately
7m
• Do not heat batteries, disassemble them, or throw
them into flames or water.
• Batteries may have different voltages, even if they
look similar. Do not use different kinds of batteries
together.
• Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
• To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the
case, then insert new batteries. If a battery should
leak and the fluid should get on your skin, flush it off
with large quantities of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
30°
30°
Point the remote control to this, then operate it within
approximately 7 m.
The player may have trouble capturing remote control
signals if there is a fluorescent light nearby. If this
happens, move the player away from the fluorescent
light.
5
En
BDP-X300_72-BDPX300-GBRB1_En.book
01
6 ページ
2016年8月8日 月曜日 午後3時16分
Software Update
Product information on this player is provided on the
Pioneer website. Check this website for update and
service information on your Blu-ray disc player.
IN Europe:
http://www.pioneer-audiovisual.eu/
IN Asia/Pacific:
http://www.intl.pioneer-audiovisual.com/support/firmware/
About operation of this
player from a mobile
device (iPod, iPhone,
iPad etc.)
The player can be controlled from a mobile device by
installing the special application onto the mobile device.
For details, see the product information on the Pioneer
website.
This special application may be changed or discontinued
without notice.
Apple, iPad, iPhone, iPod, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
6
En
BDP-X300_72-BDPX300-GBRB1_En.book
7 ページ
2016年8月8日 月曜日 午後3時16分
Types of discs/files that can be played
01
Playable discs
Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Caution
• Only the discs that have been finalized can be played.
Application format
Disc type
BD2
DVD
Logo
DATADISC1
BDMV
BDAV
DVDVideo
DVD VR
CD-DA
DTS-CD
BD-ROM
9
9
8
8
8
8
BD-R
9
9
8
8
8
9
BD-RE
9
9
8
8
8
9
DVD-ROM
9
8
9
8
8
9
DVD-R2,3,4
95
96
9
9
8
9
DVD-RW3,7
95
96
9
9
8
9
DVD+R2,3
9
8
9
8
8
9
DVD+RW3
9
8
9
8
8
9
CD-DA
(Audio CD)8
8
8
8
8
9
8
CD-R3
8
8
8
8
9
9
CD-RW3
8
8
8
8
9
9
CD-ROM
8
8
8
8
9
9
CD
1.
2.
3.
4.
5.
6.
7.
8.
Discs on which video, image or audio files are recorded.
Including dual-layered discs.
Finalize them before playing them on this player.
DVD-R for Authoring discs (3.95 GB and 4.7 GB) cannot be played.
Including the AVCHD format.
Including the AVCREC format.
Version 1.0 DVD-RW discs cannot be played.
Including Video CDs.
• “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are
trademarks of Blu-ray Disc Association.
•
is a trademark of DVD Format/Logo
Licensing Corporation.
7
En
BDP-X300_72-BDPX300-GBRB1_En.book
01
8 ページ
2016年8月8日 月曜日 午後3時16分
∫ Discs that cannot be played
• HD DVDs
• DVD-RAM discs
It is possible that some discs other than the ones listed
above may not be playable either.
High Resolution Audio, it is recommended to connect the
player to an AV receiver or amplifier compatible with
these audio formats using an HDMI cable. After loading
a BD containing sound in one of these audio formats,
select the audio format on the menu screen.
Note
• Some discs cannot be played, even if one of the logo
marks on the previous page is indicated.
• To play 8 cm discs, set the disc in the 8 cm disc
depression in the center of the disc tray. No adapter
is necessary. 8 cm BD-ROMs cannot be played.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
∫ About playback of unauthorized copies
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced
film and videos and their soundtracks. When a prohibited
use of an unauthorized copy is detected, a message will
be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.
Copyright 2004-2013 Verance Corporation. Cinavia™ is
a Verance Corporation trademark. Protected by U.S.
Patent 7,369,677 and worldwide patents issued and
pending under license from Verance Corporation. All
rights reserved.
∫ About copyright protection
Copyright protection technology is used for some Blu-ray
DiscsTM, DVDs and contents played over the Internet or
other networks. Copyright protection technology restricts
playback and analog output. Due to updates in copyright
protection provisions, the restrictions may differ
depending on the date this product was purchased.
Furthermore, the restrictions may be updated when the
software is updated after purchase.
∫ About audio formats
The following audio formats are supported on this player:
• Dolby TrueHD
• Dolby Digital Plus
• Dolby Digital
• DSD
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTSHD Master Audio | Essential is a trademark of DTS, Inc.
© DTS, Inc. All Rights Reserved.
DSD and the Direct Stream Digital logo are trademarks
of Sony Corporation.
∫ Playing BDs
• BDs (BDMV) compatible with the formats below can
be played.
– Blu-ray Disc Read-Only (ROM) Format Version 2
– Blu-ray Disc Recordable (R) Format Version 2
– Blu-ray Disc Rewritable (RE) Format Version 3
This player supports BD-ROM Profile 5.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
Blu-ray Disc Association.
BONUSVIEW functions such as playback of
secondary video (Picture-in-Picture) and secondary
audio can be used. The data used with the
BONUSVIEW functions (the secondary video
(Picture-in-Picture) and secondary audio data) may
be stored in the storage. For details on secondary
video and secondary audio playback, refer to the
disc’s instructions.
• MPEG audio (AAC)
• Linear PCM
8
En
To enjoy the surround sound of Dolby TrueHD, Dolby
Digital Plus, DSD, DTS-HD Master Audio and DTS-HD
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
BDP-X300_72-BDPX300-GBRB1_En.book
9 ページ
2016年8月8日 月曜日 午後3時16分
BD-LIVE functions such as downloading movie
trailers or additional audio and subtitle languages
and playing on-line games can be enjoyed over the
Internet. The data downloaded with the BD-LIVE
function (trailers, etc.) is stored in the storage. Refer
to the disc’s instructions for details about BD-LIVE
functions.
∫ About region numbers
Blu-ray Disc Player and BD-ROM or DVD-Video discs
are assigned region numbers according to the region in
which they are sold.
01
This player’s region numbers are:
• BD-ROM:
– Europe, Australia and New Zealand models: B
– Others: A
• DVD-Video:
– Europe models: 2
“BD-LIVE” logo is trademark of Blu-ray Disc
Association.
With BD-ROMs, it is possible to use BD-J (Java)
applications to create highly interactive titles, for
example including games.
– Australia and New Zealand models: 4
– Others: 3
Discs not including these numbers cannot be played.
Discs playable on this player are as shown below.
• BDs:
– Europe, Australia and New Zealand models: B
(including B) and ALL
– Others: A (including A) and ALL
• DVDs:
– Europe models: 2 (including 2) and ALL
– Australia and New Zealand models: 4 (including 4)
and ALL
– Others: 3 (including 3) and ALL
Oracle and Java are registered trademarks of Oracle
and/or its affiliates. Other names may be trademarks
of their respective owners.
• BDs (BDAV) compatible with the formats below can
be played.
∫ Playing CDs
Regarding copy protected CDs: This player is designed
to conform to the specifications of the Audio CD format.
This player does not support the playback or function of
discs that do not conform to these specifications.
– Blu-ray Disc Recordable (R) Format Version 1
∫ DualDisc playback
– Blu-ray Disc Rewritable (RE) Format Version 2
A DualDisc is a two-sided disc, one side of which
contains DVD content — video, audio, etc. — while the
other side contains non-DVD content such as digital
audio material.
∫ Playing DVDs
The DVD side of a DualDisc can be played on this
player.
This label indicates playback compatibility with DVD-RW
discs recorded in VR format (Video Recording format).
However, for discs recorded with a record-only-once
encrypted program, playback can only be achieved
using a CPRM compatible device.
The AVCHD is a high definition (HD) digital video
camera recorder format recording high-definition onto
certain media by using highly efficient codec
technologies.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
The non-DVD, audio side of the disc is not compatible
with this player.
It is possible that when loading or ejecting a DualDisc,
the opposite side to that being played will be scratched.
Scratched discs may not be playable.
For more detailed information on the DualDisc
specification, please refer to the disc manufacturer or
disc retailer.
∫ Playing discs created on computers or
BD/DVD recorders
• It may not be possible to play discs recorded using a
computer due to the application settings or
computer’s environment settings. Record discs in a
format playable on this player. For details, contact
the dealer.
9
En
BDP-X300_72-BDPX300-GBRB1_En.book
01
10 ページ
2016年8月8日 月曜日 午後3時16分
• It may not be possible to play discs recorded using a
computer or a BD/DVD recorder, if burn quality is not
good due to characteristics of the disc, scratches, dirt
on the disc, dirt on the recorder’s lens, etc.
∫ About video, audio, and image files and
folders
Audio and image files can be played on this player when
the folders on the disc or USB device are created as
described below.
Example of folder structure:
DivX Plus® HD devices have been tested for highquality DivX® (.divx, .avi) and DivX Plus HD (.mkv)
video playback. When you see the DivX logo, you
know you have the freedom to play your favorite
DivX movies.
This DivX Certified® device has passed rigorous
testing to ensure it plays DivX® video. To play
purchased DivX movies, first register your device at
vod.divx.com. To obtain your registration code,
locate the DivX VOD section in your device setup
menu.
Root
001.jpg/001.mp3
*
xxx.jpg/xxx.mp3
01 Folder
*
001.jpg/001.mp3
Folder
xxx.jpg/xxx.mp3
001.jpg/001.mp3
XX Folder
xxx.jpg/xxx.mp3
*
001.jpg/001.mp3
*
xxx.jpg/xxx.mp3
* The number of folders and files within a single folder
(including the root directory) is limited to a maximum of
256. Also, keep the number of folder layers to a
maximum of 5.
Note
• The file and folder names displayed on this player
may differ from those displayed on a computer.
Playable files
Video, image and audio files recorded on BDs, DVDs,
CDs or USB devices can be played.
∫ Supported video file formats
• Real RMVB (Only for ASEAN and Taiwan models)
Real RMVB logo is a trademark or a registered
trademark of RealNetworks, Inc.
• DivX Plus HD
DivX Certified® to play DivX® and DivX Plus® HD
(H.264/MKV) video up to 1080p HD, including
premium content.
10
En
DivX ®, DivX Certified ®, DivX Plus® HD and
associated logos are trademarks of DivX, LLC and
are used under license.
Note
• This DivX® Certified device must be registered in
order to play DivX Video-on-Demand (VOD) content.
First generate the DivX VOD registration code for
your device and submit it during the registration
process. Important: DivX VOD content is protected
by a DivX DRM (Digital Rights Management) system
that restricts playback to registered DivX Certified
devices. If you try to play DivX VOD content not
authorized for your device, the message
Authorization Error will be displayed and your
content will not be played. Learn more at
www.divx.com/vod.
– This player’s DivX VOD registration code can be
checked at HOME MENU
Initial Setup
Playback
DivX® VOD DRM (page 41).
– The number of views is restricted for some DivX
VOD files. When such files are played on this
player, the remaining number of views is
displayed. Files for which the remaining number of
views has reached 0 cannot be played (This DivX
rental has expired is displayed). Files for which
the number of views is not restricted can be played
as many times as you like (the remaining number
of views is not displayed).
BDP-X300_72-BDPX300-GBRB1_En.book
11 ページ
2016年8月8日 月曜日 午後3時16分
∫ Table of Playable Files
01
Playable media
BD-R/RE/-R DL/
RE DL/-R LTH,
DVD-R/RW/-R DL/
+R/+RW/+R DL,
CD-R/RW
USB devices1
Network2
MP3
(.mp3)
9
9
9
Sampling frequencies: Up to 48 kHz
Bit rate: Up to 320 kbps
Audio type: MPEG-1 Audio Layer 3
WMA3
(.wma)
9
9
9
Sampling frequencies: Up to 48 kHz
Bit rate: Up to 192 kbps
Audio type: WMA version 9
AAC
(.m4a)
9
9
9
Sampling frequencies: Up to 96 kHz
Bit rate: Up to 320 kbps
Audio type: MPEG4-AAC
MPEG2 AAC
(.aac)
9
9
9
Sampling frequencies: Up to 48 kHz
Bit rate: Up to 320 kbps
Audio type: MPEG2-AAC
WAV
(.wav)
9
9
9
Sampling frequencies: Up to 192 kHz
Quantization bitrate: 16 bit, 24 bit
Channel: 2ch/Multi (7.1 ch)
(PCM codec)
FLAC
(.flac)
9
9
9
Sampling frequencies: Up to 192 kHz
Quantization bitrate: 16 bit, 24 bit
Channel: 2ch/Multi (5.1 ch)
Playable files
(Extensions)
File specifications
Monkey’s Audio
(.ape)
9
9
9
Sampling frequencies:
Extra-high support up to 48 kHz
High support up to 96 kHz
Quantization bitrate: 16 bit, 24 bit
Channel: 2ch
DSD
(.dff/.dsf)
9
9
9
2.8 MHz (PCM output)
Channel: 2ch/Multi (5.1 ch)
ALAC
(.m4a)
9
9
9
Sampling frequencies: Up to 192 kHz
Quantization bitrate: 16 bit, 24 bit
Channel: 2ch
AIFF
(.aiff/ .aif)
9
9
8
Sampling frequencies: 32 to 192 kHz
Quantization bitrate: 8 bit, 16 bit, 24 bit
Channel: 2ch
(PCM codec)
JPEG
(.jpg/.jpeg)
9
9
9
Maximum resolution: 4 000 x 3 000 pixels
MPO
(.mpo)
9
9
9
3D photo image
PNG
(.png)
9
9
9
Maximum resolution: 2 048 x 1 024 pixel
Animated PNG files are not supported.
GIF
(.gif)
9
9
9
Maximum resolution: 2 048 x 1 024 pixel
Animated GIF files are not supported.
Rotate is not supported.
DivX
(.avi/.divx/.mkv)
9
9
9
Supported versions: Through DivX Plus® HD
Maximum resolution:
Up to 1 920 x 1 080 (DivX Plus® HD)
MP4
(.mp4)
9
9
9
Maximum resolution: Up to 1 920 x 1 080
Video: MPEG4, MPEG-4 AVC (level 4.1)
Audio: AAC, MP3
11
En
BDP-X300_72-BDPX300-GBRB1_En.book
12 ページ
2016年8月8日 月曜日 午後3時16分
Playable media
01
BD-R/RE/-R DL/
RE DL/-R LTH,
DVD-R/RW/-R DL/
+R/+RW/+R DL,
CD-R/RW
USB devices1
Network2
WMV
(.wmv)
9
9
9
Maximum resolution: Up to 1 920 x 1 080
Video: WMV9, WMV9AP (VC-1)
Audio: WMA
AVI
(.avi)
9
9
9
Maximum resolution: Up to 1 920 x 1 080
Video: MPEG4
Audio: MP3, AAC
3GP
(.3gp)
9
9
9
Video: H.263, MPEG4, H.264
Audio: MPEG-4 AAC
FLV
(.flv)
9
9
9
Video: Sorenson H.263 (FLV1), VP6 (FLV4),
H.264
Audio: MP3, AAC
RMVB4
(.rm/.rmvb)
9
9
9
Playable files
(Extensions)
1.
2.
3.
4.
File specifications
Maximum resolution: Up to 1 280 x 720
Video: RealVideo®
Audio: RealAudio®, AAC
This unit supports FAT16, FAT32 and NTFS file systems.
Unsupported files may not be displayed under the “list of input sources”.
WMA Pro, Lossless and Voice are not supported.
Only for ASEAN and Taiwan models.
Note
• Depending on the file structure, the server capacity and the network environment, it may not be possible to play
certain files, even for files indicated on the table of playable files above.
• With wireless LAN connections, depending on the usage environment (radio interference, etc.), the picture or
sound may be interrupted when playing high picture quality video files (such as files with HD quality) or high
sound quality music files (such as 192 kHz/24 bit WAV files) due to the large amount of data that must be
transferred.
• Files protected by DRM (Digital Rights Management) cannot be played (not including DivX VOD files).
• AVCHD contents cannot be played via LAN.
12
En
BDP-X300_72-BDPX300-GBRB1_En.book
13 ページ
2016年8月8日 月曜日 午後3時16分
Part Names and Functions
01
Remote Control
12 TOP MENU – Press to display the top menu of the
BD-ROM or DVD-Video.
1
18
2
3
4
5
19
20
21
6
22
7
8
9
10
13 3/4/2/1 – Use to select items, change settings
and move the cursor.
ENTER – Press to execute the selected item or enter
a setting that has been changed, etc.
23
24
14
25
15 Color buttons – Use these to navigate BD-ROM
menus.
11
26
27
12
28
HOME MENU – (page 38)
PROGRAM – (page 24)
BOOK MARK – (page 24)
ZOOM – (page 25)
13
INDEX – (page 25)
29
14
16 Number buttons – Use these to select and play the
title/chapter/track you want to view or listen to and to
select items from menus.
15
17 CLEAR – Press to clear the numeric number, etc.
16
18
30
17
OPEN/CLOSE – Press to open and close the disc
tray.
19 DISPLAY – (page 26)
20 Miracast – Display the Miracast/Wi-Fi Direct mode
screen. (page 34)
21 VIDEO P. – Adjust image quality.
22
SHORT SKIP – Press during playback to
forward to a position 30 seconds later. (page 23)
1
STANDBY/ON – Press to turn the power on and
off.
23
REPLAY – Press during playback to return to a
position 10 seconds earlier. (page 23)
24 HDMI – Use to switch the resolution of the video
signals output from the HDMI OUT terminal
(page 21).
2
CONTINUED – Use to continue playback from a
specified position. (page 29)
3
AUDIO – (page 26)
25
4
SUBTITLE – (page 25)
26
– (page 22)
5
CD/SACD – For hybrid discs, press to switch
between the CD and SACD layers. (page 26)
27
FWD – (page 23)
6
REPEAT – (page 24)
7
A-B – (page 24)
8
HQ SOUND – (page 30)
9
/
/
– (page 23)
10
STOP – (page 22)
11
REV – (page 23)
/
/
– (page 23)
28 POP UP MENU/MENU – Press to display the
BD-ROM or DVD-Video menus.
29
RETURN – Press to return to the previous
screen.
30 FUNCTION – (page 28)
13
En
BDP-X300_72-BDPX300-GBRB1_En.book
01
14 ページ
2016年8月8日 月曜日 午後3時16分
Front Panel
1
1
2
STANDBY/ON – Press to turn the power on and
off.
3
4
5
6
7
8
9
5
Remote control sensor – (page 5)
6
OPEN/CLOSE – Press to open and close the disc
tray.
2
Disc tray
3
Front panel display
7
4
Reset button – If the power cannot be turned off (set
to standby), use a thin rod to press this button. When
the Reset button is pressed, power to the unit is
8
– Press to stop playback.
USB port – (page 18)
9
– Press to start playback.
turned off (standby status). When the
STANDBY/
ON button is pressed to turn on the power, the unit
becomes operational again.
Rear Panel
1
14
En
2
3
4
5
6
1
LAN (10/100) terminal – (page 19)
4
DIGITAL AUDIO OUT terminals – (page 18)
2
USB port – (page 18)
5
ANALOG AUDIO OUT terminals – (page 18)
3
HDMI OUT terminal – (page 15)
6
AC IN – (page 19)
BDP-X300_72-BDPX300-GBRB1_En.book
15 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 2
02
Connecting up
Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
After connecting, make the settings at the Setup
Navigator or Initial Setup menu according to the type of
cable connected (page 20).
“x.v.Color” is a promotion name given to the products
that have the capability to realize a wide-gamut color
space based on the international standard specifications
defined as xvYCC.
Also refer to the operating instructions for the device
being connected.
Connecting using an
HDMI cable
The audio and video signals can be transferred to HDMIcompatible devices as digital signals with no loss of
sound or video quality.
Note
• Make the settings at the Setup Navigator menu
according to the connected HDMI-compatible device
(page 20).
• 1080p and 4K video signals may not be output,
depending on the HDMI cable being used.
About HDMI
This player incorporates the High-Definition Multimedia
Interface (HDMI®) technology.
“x.v.Color” and
Corporation.
are trademarks of Sony
∫ Playable audio signals through the
HDMI OUT terminal
•
•
•
•
•
•
•
Dolby TrueHD
Dolby Digital Plus
Dolby Digital
DTS-HD Master Audio
DTS-HD High Resolution Audio
DTS Digital Surround
Linear PCM
Linear PCM audio signals meeting the following
conditions can be output:
– Sampling frequency: 32 kHz to 192 kHz
– Number of channels: Up to 8 (up to 6 for a 192 kHz
sampling frequency)
• DSD audio
• AAC
∫ When connected to a DVI device
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing, LLC in the
United States and other countries.
The player supports Deep Color.
The conventional players can transmit a video signal
with 8 bit color depth in the YCbCr 4:4:4 or RGB format;
the players supporting Deep Color can transmit a video
signal with a color bit depth of greater than 8 bits per
color component. Subtle color gradations can be
reproduced when this player is connected to a TV that
supports Deep Color.
This product is compatible with “x.v.Color” that have the
capability to realize a wide-gamut color space based on
the xvYCC specifications.
Playing video signals conforming to “xvYCC” standards
on this player when this player is connected to an
“x.v.Color”-compatible TV, etc., expands color
reproduction capabilities, allowing natural colors to be
reproduced more faithfully than ever.
• It is not possible to connect DVI devices
(computer displays, for example) that are not
compatible with HDCP. HDCP is a specification to
protect audiovisual content across the DVI/HDMI
interface.
• No audio signals are output.
• This player is designed for connection with HDMIcompatible devices. When connected to a DVI
device, it may not operate properly depending on the
DVI device.
15
En
BDP-X300_72-BDPX300-GBRB1_En.book
02
16 ページ
2016年8月8日 月曜日 午後3時16分
About Control Function with
HDMI
The functions work when a control function with HDMIcompatible Pioneer TV or AV system (AV receiver or amplifier,
etc.) is connected to the player using an HDMI cable.
Also refer to the operating instructions for the TV and AV
system (AV receiver or amplifier, etc.).
∫ To use the control function with HDMI
• The control function with HDMI operates when
control function with HDMI is set to On for all devices
connected with HDMI cables.
• Once the connections and the settings of all the
devices are finished, be sure to check that the
player’s picture is output to the TV. (Also check after
changing the connected devices and reconnecting
HDMI cables.) The control function with HDMI may
not operate properly if the player’s picture is not
properly output to the TV.
• Use High Speed HDMI®/TM Cables when using the control
function with HDMI. The control function with HDMI may
not operate properly if other HDMI cables are used.
• For some models, the control function with HDMI may
be referred to as “KURO LINK” or “HDMI Control”.
• The control function with HDMI does not work with
devices of other brands, even if this player is
connected with an HDMI cable.
∫ What the control function with HDMI can do
• Operating the player with the TV’s remote
control.
Such player operations as starting and stopping
playback and displaying the menus can be
performed from the TV.
• The player’s playback picture is displayed on the
TV’s screen. (Auto-select function)
The input switches automatically on the TV and AV
system (AV receiver or amplifier, etc.) when playback
is started on the player or the HOME MENU is
displayed. When the input is switched, the playback
picture, the HOME MENU appears on the TV.
• The power of the TV and the player turns on and
off automatically. (Simultaneous power function)
When playback on the player is started or the HOME
MENU is displayed, if the TV’s power was off, its
power turns on automatically. When the TV’s power is
turned off, the player’s power automatically turns off.
∫ PQLS
About the PQLS function
16
En
PQLS (Precision Quartz Lock System) is a digital audio
transfer control technology using the HDMI control
function. The quartz oscillator on the AV receiver is used
to reproduce high quality sound, so the signal sent from
the AV receiver to this unit is controlled. This eliminates
the influence of jitter generated during signal transfer
which can adversely affect the sound quality.
The PQLS function on this unit works when the following
conditions are met:
• When music CDs (CD-DA) are played. (“PQLS 2ch
audio” function)
• When all discs (BD, DVD, etc.) are played with linear
PCM output. (“PQLS Multi Surround” function)
• When playing with bitstream audio output. (“PQLS
Bitstream” function)
• The various PQLS functions are activated when
Pioneer AV receiver supporting the PQLS functions
is connected directly to the HDMI OUT terminal with
an HDMI cable, and the main unit's settings are set
as shown below (page 39).
Control: On
• Also refer to the instructions of the AV receiver.
• You will need to make settings for PQLS on connected
AV receivers to enable the various PQLS functions.
• See Onkyo & Pioneer website about AV receivers
compatible with PQLS function.
Caution
• The current PQLS setting is displayed on the player's
front panel display for about 2 seconds when the
PQLS function is switched over.
• The PQLS function may stop working when the video
output resolution is switched. The PQLS function will start
working again once playback is stopped then restarted.
• Turn on the power of the AV receiver connected to the
HDMI OUT terminal, then start playback of the disc.
• Connect the player directly to the Pioneer AV
receiver compatible with PQLS function. Interrupting
a direct connection with an amplifier or AV converter
(such as an HDMI switch) can cause malfunction.
∫ Sound Retriever Link
About Sound Retriever Link
Sound Retriever Link is a sound quality correction
control technology that automatically adjusts the
compressed sound quality for the connected AV receiver
using HDMI control function.
Sound Retriever Link function allows you to enjoy higher
quality audio by setting the connected AV receiver’s
Sound Retriever function automatically.
Sound Retriever Link function on this player works
exclusively with the following situations.
• When playing via a network or playing PC contents
stored on a USB device.
• The Pioneer AV receiver compatible with Sound
Retriever Link function is connected to this player
through an HDMI cable and the player’s setting is set
as shown below (page 39).
Control: On
• Also refer to the instructions of the AV receiver.
• See Onkyo & Pioneer website about AV receivers
compatible with Sound Retriever Link function.
BDP-X300_72-BDPX300-GBRB1_En.book
17 ページ
2016年8月8日 月曜日 午後3時16分
Caution
• Connect the player directly to the Pioneer AV
receiver compatible with Sound Retriever Link
function. Interrupting a direct connection with an
amplifier or AV converter (such as an HDMI switch)
can cause malfunction.
∫ Stream Smoother Link
About Stream Smoother Link
Stream Smoother Link is a function that improves picture
quality of network video contents using the control function with
HDMI. Stream Smoother Link function allows you to enjoy a
high quality picture with less noise by setting the connected AV
receiver’s Stream Smoother function automatically.
Stream Smoother Link function on this player works
exclusively with the following situations.
• When playing a video distribution service on a
network or PC contents stored on a medium.
Caution
Connecting a TV
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Rear panel
Match the direction
of the plug to the
terminal and insert
straight.
To HDMI
input terminal
AV receiver
or amplifier
HDMI cable
(commercially
available)
• Connect the player directly to the Pioneer AV
receiver compatible with Stream Smoother Link
function. Interrupting a direct connection with an
amplifier or AV converter (such as HDMI switch) can
cause malfunction.
02
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS Digital Surround, LPCM, AAC or
DSD. For instructions on connecting the TV and
speakers to the AV receiver or amplifier, refer to the
operating instructions for AV receiver or amplifier.
HDMI cable
(commercially
available)
• The Pioneer AV receiver with Stream Smoother Link
function is connected to this player through an HDMI cable
and the player’s setting is set as shown below (page 39).
Also refer to the instructions for the AV receiver.
Control: On
See Onkyo & Pioneer website about AV receivers
compatible with Stream Smoother Link function.
Connecting an AV receiver or
amplifier
From HDMI
output
terminal
To HDMI input
terminal
TV
Direction of signal flow
See Connecting an AV receiver or amplifier on page 17 to
connect an AV receiver or amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Rear panel
HDMI cable
(commercially
available)
Match the direction of
the plug to the terminal
and insert straight.
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable.
To HDMI
input terminal
Direction of signal flow
TV
17
En
BDP-X300_72-BDPX300-GBRB1_En.book
02
18 ページ
2016年8月8日 月曜日 午後3時16分
Connecting audio
cables
Connecting the USB device
Caution
• Be sure to turn the player’s power off before
connecting or disconnecting USB devices.
Connecting an AV receiver or
amplifier using a digital audio
cable
• When using an external hard disk as the external
storage device, be sure to turn on the hard disk’s
power before turning on the player’s power.
• If the USB device is write-protected, be sure to
disable the write-protection.
Rear panel
• When connecting the USB cable, hold onto the plug,
set the plug in the proper direction for the port and
insert it horizontally.
2-channel
analog audio
can also be
connected.
Direction of signal flow
To coaxial digital
audio input terminal
To optical digital
audio input terminal
AV receiver
or amplifier
Audio cable
(commercially available)
Optical digital audio
cable (commercially
available)
White
Red
Coaxial digital
audio cable
(commercially
available)
• Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB device.
• When a USB device is connected and the player’s
power is turned on, do not unplug the power cord.
Player’s front panel
To audio input terminals
Hard disk, etc.
USB flash drive
Note
USB cable
(commercially
available)
• The volume of analog output audio may be low
depending on the setting of this device and contents
being played.
Rear panel
Connecting components
to the USB port
About USB devices
The USB devices that can be connected to the player are
as shown below.
USB flash drive
USB cable
(commercially
available)
Hard disk, etc.
• USB 2.0-compatible USB flash drive (capacity of 1 GB
or greater, 2 GB or greater recommended) or HDD
(capacity 2 TB or less)
• File system: FAT16, FAT32 or NTFS
Note
• Devices may not work if connected to the USB port
via a memory card reader or USB hub.
• USB devices may not be recognized if they contain
multiple partitions.
• Use a USB cable with a length of 2 meters or less.
• Some USB devices may not operate with this player.
• Operation of USB devices is not guaranteed.
18
En
Note
• Devices formatted with a file system other than the
above cannot be used.
BDP-X300_72-BDPX300-GBRB1_En.book
19 ページ
2016年8月8日 月曜日 午後3時16分
Connecting to the
network through LAN
interface
By connecting this player to the network via the LAN
terminal or a wireless LAN, you can play image, audio
and video files stored on the components on the
network, including your computer, using SOURCE
inputs.
∫ LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
02
Connecting to a wireless LAN
Manual settings must be made to connect to a wireless
LAN. For details, see About how digital audio formats are
output on page 47.
Internet
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 43 .
Modem
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
Router
WAN
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.
• Please note that Pioneer will accept no responsibility
whatsoever for communications errors or problems
related to the user's network connection environment
or connected devices. Contact your provider or the
manufacturer of your connected devices.
Connecting with a LAN cable
(wired LAN)
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
higher).
Computer
Connecting the power
cord
Connect the power cord after all the connections
between devices have been completed.
Rear panel
Rear panel
LAN cable
(commercially
available)
Modem
To wall outlet
Power cord
(included)
Router
LAN
Computer
Internet
3
2
1
WAN
LAN cable
(commercially available)
19
En
BDP-X300_72-BDPX300-GBRB1_En.book
03
20 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using the player
in the following situations.
• When you use the player for the first time.
• After Initial Setup format.
Caution
∫ If the Setup Navigator menu is not
displayed
1 Press
HOME MENU to display the Home
Menu, select Initial Setup
Setup Navigator
Start, then press ENTER.
3 Start Setup Navigator.
Press ENTER.
• Setup Navigator starts.
4 Select the OSD language.
Use 3/4 to select, then press ENTER.
• Before turning on the power, check that the
connections between the player and other devices
are correct. Also, turn on the power of the devices
connected to the player before turning on the
player’s power.
When a Pioneer TV that is compatible with Control
function is connected to this player’s HDMI OUT
terminal, language settings are imported from the
Pioneer TV’s language settings before Setup Navigator
begins.
• When using a Pioneer TV or front projector
compatible with the Control function, set Control to
On on the connected device before turning on the
player’s power.
5 Select the appropriate output resolution for the
connected TV.
Use 3/4 to select, then press ENTER.
6 Select the appropriate aspect for the connected
TV.
Use 3/4 to select, then press ENTER.
7 Close the Setup Navigator menu.
Press ENTER.
• Setup Navigator finishes and the setting is stored.
• Press
screen.
1 Turn on the TV’s power and switch the input.
See the TV’s operating instructions for the details of
operating the TV.
2 Turn on the player’s power.
Press Í STANDBY/ON.
Check that the Setup Navigator menu is displayed.
20
En
RETURN to go back to the previous
BDP-X300_72-BDPX300-GBRB1_En.book
21 ページ
2016年8月8日 月曜日 午後3時16分
Switching the output
video resolution
Use the procedure below to switch the output video
resolution from the various video output terminals.
1 Press HDMI.
• When 4K/24p, 1080/24p is selected, the signals are
output as such, even if your TV is not compatible with
4K/24p or 1080/24p signals. If the picture is not
displayed properly, use HDMI to set an output video
resolution at which the video and audio signals are
properly output.
03
• When the unit is set to [Auto] and is playing 24p
content, the TV outputs the content at 4K/24p, if the
TV you are using supports 4K/24p output. If the
connected television set does not support 4K/24p,
then the output is made with a recommended
resolution other than 4K/24p.
• When the Resolution is set to Auto, 1080p, 4K/24p
and if the resolution of output from the HDMI is
1080p, 4K/24p, then output may not occur
depending on the HDMI cable in use.
• There are resolutions that cannot be output
depending on the television set in use.
• The current output video resolution setting is
displayed on the player’s front panel display.
To switch the output video resolution, press HDMI
again.
• The output video resolution setting can also be
switched by selecting Resolution from the Initial
Setup menu (page 38).
Caution
• On some devices (TV, AV receiver or amplifier, etc.),
the video or audio may not be output properly when
the resolution is switched. If this happens, use HDMI
to set a resolution at which the video and audio are
properly output.
• When video signals are being output with a
resolution of 4K/24p, 1080/50i, 1080/50p, 720/50p,
1080/24p, 1080/60i, 1080/60p or 720/60p from the
HDMI OUT terminals, the picture may be output with
an aspect ratio of 16:9, even if the TV Aspect Ratio
is set to 4:3 (Standard).
• The picture may not be displayed for a while when
the resolution is switched.
• When the connected device supports 3D and if a 3D
Disc is played back, the 3D output is prioritized for
output, regardless of the resolution settings. Also,
switching of resolution may not be possible while the
3D contents are playing.
• When Auto is selected, the picture is output at 60
frames/second if your TV is not compatible with
1080/24p signals.
21
En
BDP-X300_72-BDPX300-GBRB1_En.book
04
22 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 4
Playback
Playing discs or files
This section describes the player’s main operations.
For the types of discs and files that can be played, see
page 7. Video, image and audio files recorded on discs
are played with the Source function (page 31).
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs
this does not cancel the resume playback
function.)
2 Press < OPEN/CLOSE to open the disc tray and
load the disc.
– When it entered the Miracast / Wi-Fi Direct Mode
screen. (page 34)
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player’s front panel display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3
Press 1/; to play the disc.
• To pause, press 1/; during playback.
• To stop, press ∫ STOP during playback.
Note
• Some discs start playing automatically when the disc
tray is closed.
• BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the
player’s settings to unlock the parental lock. For
details, see page 42.
• Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for the
disc.
• If the picture and sound are not properly output,
Troubleshooting on page 50.
∫ If the disc menu is displayed
For some discs, the disc menu is displayed automatically
when playback starts. The contents of the disc menu and
the way to operate depend on the disc.
∫ Resuming playback from where it was
stopped (resume playback function)
• When ∫ STOP is pressed during playback, the point
at which the disc stopped is stored in the memory.
When
is pressed after that, playback resumes
from that point.
En
– When the disc tray is opened.
1 Press Í STANDBY/ON to turn on the power.
Turn the TV’s power on and switch its input beforehand.
Note
22
Note
• The resume playback function is canceled
automatically in the following cases:
• To cancel the resume playback function, press
∫ STOP while playback is stopped.
• When you want to continue playback from a position
you specify to be played next time, see Playing
specified range of discs, titles or chapter (track/file) in
random order on page 29.
• The resume playback function cannot be used for
some discs.
BDP-X300_72-BDPX300-GBRB1_En.book
23 ページ
2016年8月8日 月曜日 午後3時16分
Forward and reverse scanning
1 During playback, press 6 REV or 5 FWD.
• The scanning speed switches each time the button is
pressed. The speed steps depend on the disc or file
(the speed is displayed on the TV screen).
∫ To resume normal playback
1 Press 1/;.
To return to a position a short
while ago
Press during playback to return to a position 10 seconds
earlier.
1 During playback, press REPLAY.
To advance to a position
slightly ahead
Playing specific chapters,
tracks or files
Press during playback to forward to a position 30
seconds later.
1 During playback, input the number of the
chapter/track/file you want to select.
• Use the number buttons (0 to 9) to input the number,
then press ENTER.
Slow playback
• Press CLEAR to clear the values you have input.
Note
• If the set disk is a CD, you can specify the track and
play, even when the Pioneer logo is displayed on the
screen.
• If the disk being played is a CD, you can specify the
track and play, even during pause.
Skipping content
1 During playback, press : or 9.
• When 9 is pressed, the playback skips ahead to
the beginning of the next chapter/track/file.
• When : is pressed while a video or audio file is
playing, the playback skips back to the beginning of
the currently playing chapter/track/file. Press twice to
skip back to the beginning of the previous chapter/
track/file.
• When : is pressed while an image file is playing,
playback returns to the previous file.
04
1 During playback, press SHORT SKIP.
1 While playback is paused, press and hold / .
• The speed switches each time the button is pressed
(the speed is displayed on the TV screen).
∫ To resume normal playback
• Press 1/;.
Reverse slow playback
1 While playback is paused, press and hold
/ .
• The speed switches each time the button is pressed
(the speed is displayed on the TV screen).
∫ To resume normal playback
• Press 1/;.
Step forward and step reverse
1 While playback is paused, press
/ or / .
• The picture moves a step forward or step reverse
each time the button is pressed.
• Each time the
advanced.
• Each time the
reversed.
/
button is pressed, a frame is
/
button is pressed, a frame is
∫ To resume normal playback
• Press 1/;.
23
En
BDP-X300_72-BDPX300-GBRB1_En.book
04
24 ページ
2016年8月8日 月曜日 午後3時16分
Playing a specific section
within a title or track repeatedly
(A-B Repeat)
Use this procedure to play a specific section within a title
or track repeatedly.
1 During playback, press A-B to select the starting
point.
• [A-] is displayed on the TV screen.
2 During playback, press A-B to select the ending
point.
• A-B Repeat playback starts.
Playing in the desired order
(Programmed Play)
1
During playback, press PROGRAM.
• The program screen is displayed.
2 Select the program number.
Use 3/4 to select, then press ENTER.
3 Select the track/title/chapter you want to play.
Use 3/4/2/1 to select, then press ENTER.
4
Press 1/;.
• Playback starts.
∫ Editing the program
∫ To cancel A-B Repeat play
• Press A-B during the A-B Repeat play.
Note
1 Select the program number you want to edit, then
press ENTER.
2
• A-B Repeat play is canceled in the following cases:
Select title/chapter, then press ENTER.
– When you search outside of the repeat range.
∫ Deleting the program
– When you start other Repeat Play or Random
Play.
1 Select the program number you want to delete,
then press CLEAR.
Playing repeatedly
(Repeat Play)
• To delete all the programs, press
Use this procedure to play the currently playing disc, title,
chapter, track or file repeatedly.
• When you use audio CDs for Programmed Play,
enter the track number in step 3.
1 During playback, press REPEAT.
• Each time you press REPEAT the type of repeat
modes changes as shown below.
• This function does not work with BDs.
BD
Current chapter
Current title
DVD
Current chapter
Current title
RETURN.
Note
Making bookmarks
You can make bookmarks on the video currently playing
and play back the scene later.
All titles
CD/Video file/Audio file/Image file
Current track/file
All tracks/All files in folder
∫ To cancel Repeat Play
• Press REPEAT several times during Repeat Play.
Note
• Repeat Play is canceled in the following cases:
– When you search outside the repeat range.
– When you start other Repeat Play or Random
Play.
1 During playback, press BOOKMARK.
• The bookmark is made.
• Maximum number of bookmarks are 12.
∫ Playing the bookmarked scene
1
Press and hold BOOKMARK for a few seconds.
• The list of bookmarks is displayed.
2 Select the bookmark you want to play.
Use 2/1 to select, then press ENTER.
∫ Deleting the bookmark
1 Select the bookmark you want to delete, then
press CLEAR.
• Bookmarks may not be allowed to make for some
discs.
• Bookmarks are canceled in the following cases:
– When the player’s power turned off.
– When the disc tray is opened.
24
En
BDP-X300_72-BDPX300-GBRB1_En.book
25 ページ
2016年8月8日 月曜日 午後3時16分
Zoom
1 During playback, press ZOOM.
• Each time you press ZOOM, the zoom level changes
as shown below.
[Zoom 2x]
[Zoom 3x]
[Zoom 4x]
[Zoom 1/2]
[Zoom 1/3]
[Zoom 1/4]
Normal (not
displayed)
Note
• This function does not work with some discs.
Playing photos as slideshows
This function plays the photos, switching them
automatically.
1 During playback, press INDEX.
• Display the thumbnail of image files. The maximum
number is 12 at once.
• If you select one of the image and press ENTER,
slideshow will start from the image you selected.
∫ Rotating/inverting photos
When a slideshow is playing or paused, the display
switches as shown below when the 3/4/2/1 buttons
are pressed.
1 button: Rotates 90° clockwise
2 button: Rotates 90° counterclockwise
3 button: Flips horizontally
4 button: Flips vertically
Switching the camera angles
For BD-ROM and DVD-Video discs on which multiple
angles are recorded, the angles can be switched during
playback.
1
2
During playback, press FUNCTION.
Select Angle from the FUNCTION menu.
• The current angle and total number of recorded
angles are displayed on the TV screen.
• If the angles are not switched, switch them from the
disc menu screen.
Switching the subtitles
04
For discs or files on which multiple subtitles are
recorded, the subtitles can be switched during playback.
Caution
• The subtitles cannot be switched for discs recorded
by a DVD or BD recorder. Also refer to the operating
instructions for the device used for recording.
1 During playback, press SUBTITLE.
• The current subtitle and total number of recorded
subtitles are displayed on the TV screen.
To switch the subtitle, press SUBTITLE again.
• The subtitles can also be switched by selecting
Subtitle from the FUNCTION menu.
• If the subtitles are not switched when SUBTITLE is
pressed, switch them from the disc menu screen.
∫ Turning the subtitles off
1 Press SUBTITLE several times or select Subtitle
from the FUNCTION menu to switch the setting to
Off.
∫ About displaying external subtitle files
while playing DivX media files
In addition to the subtitles recorded in DivX media files,
this player also supports the display of external subtitle
files. If a file has the same name as that of a DivX media
file aside from the file extension and the extension is one
of the extensions listed below, the file is treated as an
external subtitle file. Note that DivX media files and
external subtitle files must be located in the same folder.
Only one external subtitle file can be displayed on this
player. Use a computer, etc., to delete any external
subtitle files you do not want to display from the disc.
Text files with the extensions “.smi”, “.srt”, “.sub” and
“.txt” are supported.
Note
• Depending on the file, the external subtitles may not
be displayed properly.
Note
• Some discs cannot switch angles.
25
En
BDP-X300_72-BDPX300-GBRB1_En.book
04
26 ページ
2016年8月8日 月曜日 午後3時16分
Moving subtitles
The position of the subtitles displayed while playing BDROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and display the
subtitles on the TV screen.
2 Press and hold the SUBTITLE button for at least
2 seconds.
• The Subtitle shift mode is set.
• [Subtitle shift mode] is displayed on the TV screen.
3 Use the 3/4 buttons to move the position of the
subtitles.
• Once the setting is complete, press ENTER.
4 Cancel the Subtitle shift mode.
Press the ENTER button.
When using BD-Video discs compatible with
BONUSVIEW, you can enjoy such functions as
secondary video (picture in picture) (page 28) and
secondary audio (page 28). With BD-Video discs
supporting BD-LIVE, special video images and other
data can be downloaded from the Internet.
Data recorded on BD video and downloaded from BDLIVE is stored on the USB flash drive (external memory).
To enjoy these functions, connect a USB flash drive
(minimum 1 GB capacity, 2 GB or greater
recommended) supporting USB 2.0 High Speed (480
Mbit/s) to the USB port.
• When you insert or remove a USB flash drive, be
sure to turn the player’s power off.
For discs or files on which multiple audio streams/
channels are recorded, audio streams/channels can be
switched during playback.
• To recall data stored in the USB flash drive, first
insert the disc media that was being used at the time
the data was downloaded (if a different disc is
loaded, the data stored on the USB flash drive
cannot be played).
• The audio can also be switched by selecting Audio
from the FUNCTION menu.
• If the audio is not switched when AUDIO is pressed,
switch it from the disc menu screen.
Switching the CD/SACD
playback area
[CD AREA]
to beginning)
[SACD 2CH]
[SACD MCH]
• If a USB flash drive containing other data (previously
recorded) is used, the video and audio may not play
back properly.
• Do not disconnect the USB flash drive while
playback is in progress.
• Some time may be required for the data to load
(read/write).
Caution
1 Select the area you want to play.
In the stop mode, press CD/SACD. The playback area
switches on the front panel display window each time the
button is pressed.
(back
• During playback, press ∫ STOP twice to cancel
continuous play before selecting the playback area.
• It may not be possible to use the BONUSVIEW and
BD-LIVE functions if there is insufficient space on the
USB flash drive. In this case, refer to Erasing data
that has been added to BDs and application data on
page 42 for erasing the Virtual Package data and the
BD-LIVE data in the USB flash drive.
Note
• Operation of USB flash drives is not guaranteed.
Displaying the disc information
• Playback of BD-LIVE function data differs depending
on the disc used. For details, consult the user
instructions supplied with the disc.
1 Press DISPLAY.
The disc information appears on the TV screen. To
switch off the information display, press DISPLAY again.
• To enjoy the BD-LIVE function, a network connection
and settings are required (pages 19 and 43).
The information display differs between during playback
and when playback is stopped.
En
This player is compatible with BD-Video BONUSVIEW
and BD-LIVE.
Switching the audio
1 During playback, press AUDIO.
• The current audio and total number of recorded
audio streams are displayed on the TV screen.
To switch the audio, press AUDIO again.
26
Enjoying BONUSVIEW or
BD-LIVE
• BD-LIVE is a function that provides for connection to
the Internet. Discs supporting the BD-LIVE function
may send ID codes identifying this player and the
disc to the contents provider via the Internet.
BDP-X300_72-BDPX300-GBRB1_En.book
27 ページ
2016年8月8日 月曜日 午後3時16分
Playback functions
04
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions
cannot be used. Check the usable functions on the table below.
Disc/file type
Function1
DVD-R
/-RW
BDROM
BD-R
/-RE
DVDVideo
Video
file
Image
file
Audio
file
Audio
CD
Forward and reverse
scanning
92
92
92
92
92
92
92
8
93
93
Short Skip/Replay
9
9
9
9
Playing specific titles,
chapters or tracks
9
9
9
8
9
9
9
9
9
Skipping content
9
9
9
9
9
9
8
8
8
9
9
9
9
9
9
9
Slow motion play/
reverse slow playback4
9
9
9
9
9
9
9
95
8
8
8
Step forward and step
reverse6
9
9
9
9
9
9
97
8
8
8
(VR
format)
AVCREC AVCHD
A-B Repeat play6
9
9
9
9
9
9
9
8
9
9
Repeat Play
9
9
9
9
9
9
9
9
9
9
Zoom
9
9
9
9
9
9
9
9
8
8
Angle8
9
8
9
8
8
8
8
8
8
8
Subtitle9
9
9
9
9
9
9
9
8
8
8
Audio10
9
9
9
9
9
9
9
8
8
8
Disc information
9
9
9
9
9
9
9
9
9
9
1.
2.
3.
4.
5.
6.
7.
8.
9.
Some functions may not work for some discs or files, even if indicated [9] on the table.
Sound is not produced during forward and reverse scanning.
Sound is produced during forward and reverse scanning.
No sound is output during slow motion playback.
Reverse slow motion playback is not possible.
If a chapter is switched, some discs will cause an automatic return to normal playback.
Reverse step playback is not possible.
Angle mark is displayed for scenes at which multiple angles are recorded if Angle Mark is set to On (page 41).
• The types of recorded subtitles depend on the disc and file.
• In some cases, the subtitle may switch or the switching screen provided on the disc may be displayed immediately, without the current
subtitle or the total number of subtitles recorded on the disc being displayed.
10. The types of recorded audio streams depend on the disc and file.
27
En
BDP-X300_72-BDPX300-GBRB1_En.book
04
28 ページ
2016年8月8日 月曜日 午後3時16分
Using the FUNCTION
menu
∫ FUNCTION menu item list
Item
Description
Title (track)1
Display the title information for the currently
playing disc and total number of titles on
the disc. Also select the title you want to
play. (See the following description.)
Chapter
Display the information for the currently
playing chapter (track/file) and total
number of chapters in the disc. Also
select the chapter (track/file) you want to
play. (See the following description.)
File
Display current file information.
Select your favorite file.
Time
Display the elapsed or remaining time.
Also enter the time from which you want
to start playback. (See the following
description.)
Various functions can be called out according to the
player’s operating status.
1 Display the FUNCTION menu.
Press FUNCTION during playback.
2 Select and set the item.
Use 3/4 to select, then press ENTER.
Note
• Items that cannot be changed are displayed in gray.
The items that can be selected depend on the
player’s status.
∫ To change the setting of the selected
item
Mode
Switch the play mode (page 29).
Audio
Switch the audio.
Use 3/4 to change.
Angle
Switch the BD-ROM/DVD-Video disc’s
camera angle.
∫ To close the FUNCTION menu
Subtitle
Switch the subtitle language.
Press FUNCTION.
Subtitle Style
Switch the type of text used for subtitles.
Code Page
Switch the subtitle code page.
Secondary Video2
Switch the BD-ROM’s secondary video
(Picture-in-Picture).
Secondary Audio3
Switch the BD-ROM’s secondary audio.
Bitrate
Display the bitrate of the audio/video/
secondary video/secondary audio.
Still off
Switch off the BD-ROM’s still picture.
Short Skip
Forward to a position 30 seconds later.
Replay
Return to a position 10 seconds earlier.
Slide Show
Switch the playback speed while playing
the picture slide show.
Transition
Change the style of the slide show while
playing the picture slide show.
1. One of these types of information is displayed, depending on the
type of disc.
2. Secondary video mark is displayed for scenes at which
secondary video is recorded if PIP Mark is set to On (page 41).
3. Secondary audio mark is displayed for scenes at which
secondary audio is recorded if Secondary Audio Mark is set to
On (page 41).
Note
• Selectable items depend on the type of disc.
• The types of recorded secondary audio streams
depend on the disc and file.
• Some discs do not include secondary audio/
secondary video.
28
En
• In some cases, the secondary audio/secondary
video may switch or the switching screen provided
on the disc may be displayed immediately, without
the current secondary audio/secondary video or the
total number of secondary audio/secondary video
streams recorded on the disc being displayed.
BDP-X300_72-BDPX300-GBRB1_En.book
29 ページ
2016年8月8日 月曜日 午後3時16分
Playing from a specific time
(Time Search)
1 Select Time.
Use 3/4 to select, then press ENTER.
2 Input the time.
Use the number buttons (0 to 9) to input the time.
Continuing playback
from a specified position
(Continued Viewing
Playback)
• To play from 45 minutes, input 0, 0, 4, 5, 0 and 0,
then press ENTER.
This function allows you to continue playback from a
position you specify to be played next time, even after
turning the power off.
• To play from 1 hour 20 minutes, input 0, 1, 2, 0, 0 and
0, then press ENTER.
∫ Setting
• Press CLEAR to clear the values you have input.
1 During playback, press CONTINUED at the
position from which you want to start continued
viewing playback.
The elapsed playing time at the specified position is
displayed on the TV screen.
3 Starting playback from the specified time.
Press ENTER.
Playing a specific title, chapter,
track or file (Search)
1 Select Title or Chapter (track/file).
Use 3/4 to select, then press ENTER.
2 Input the Title or Chapter (track/file) number.
Use the number buttons (0 to 9) or 3/4 to input the
number.
• To search for title 32, input 3 and 2, then press
ENTER.
• Press CLEAR to clear the values you have input.
3 Starting playback from the specified title,
chapter or track.
Press ENTER.
Playing specified range of
discs, titles or chapter (track/
file) in random order
You can select from two types of random playback.
1 Select Mode.
Use 3/4 to select, then press ENTER.
2 Select the playing mode.
Use 3/4 to select, then press ENTER.
04
∫ Playing
1 Press 1/; to play the title for which you have set
continued viewing playback.
The continued viewing playback confirmation screen
appears.
• In the cases below, the continued viewing playback
confirmation screen is displayed.
For BD videos
The screen is displayed after the main featured has
been played.
For recorded discs
The screen is displayed after the folder is selected
and the title set for continued viewing playback has
been played.
2 Use 2/1 to select Yes, then press ENTER.
Playback starts from the specified position.
Note
• The continued viewing playback setting is canceled
when < OPEN/CLOSE is pressed.
• Continued viewing playback may not work properly
with some discs.
∫ Random play
The specified range of discs, titles or chapter (track/file)
is played in random order. The same item may be played
consecutively.
∫ Shuffle play
The specified range of discs, titles or chapter (track/file)
is played in random order. Each item is played once.
29
En
BDP-X300_72-BDPX300-GBRB1_En.book
04
30 ページ
2016年8月8日 月曜日 午後3時16分
Changing the Video options
You can adjust the setting of the screen according to
your liking.
1 Press VIDEO P. to display the Video Parameter
screen.
2 Select the item and change the setting.
Use 3/4 to select the item, then use 2/1 to change
the setting. Once the setting is completed, press
RETURN to close the settings screen.
List of setting items
Item
Description
Brightness
Adjust the brightness.
Contrast
Adjust the shade of color.
Hue
Adjust the balance of green and red.
Saturation
Adjust the color saturation.
∫ Closing the Video Parameter screen
Press VIDEO P. or
RETURN.
Note
• It is not possible to open the Video Parameter screen
when any of the Home Menu (Source, Initial Setup),
Function Menu or Disc Menu is being displayed.
Using the HQ Sound function
When HQ Sound is on, output of video signals is
suppressed to reduce the occurrence of noise that
influences audio signals, thus enabling high sound
quality output.
• When the HQ Sound function is on, only audio is
output (video is not output). Video is output when you
use an operation that requires on screen operation,
such as the HOME MENU. Video output is stopped
again when you close the on screen display.
1 Press HQ SOUND.
• The current HQ Sound setting is displayed on the
player’s front panel display when HQ SOUND is
pressed. To change the setting, press HQ SOUND
several times.
Note
• Even when the HQ Sound function is on, it will be
switched off automatically if the power is turned off
and on.
30
En
BDP-X300_72-BDPX300-GBRB1_En.book
31 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 5
Playback from Source function
05
(Digital Media Renderers). This player supports this
DMR function. When in the DMR mode, such
operations as playing and stopping files can be
performed from the external controller.
About Source function
This player’s Source function allows you to display a list
of input sources and start playback. This chapter
describes setup and playback procedures required to
enjoy these features. When you play the files stored on
your computer or the components on the network, it is
advisory that you also refer to the operation manual
supplied with your network component.
The input sources that can be played from Source
function are as shown below.
• To play back audio files stored on components on
the network, you must turn on the DHCP server
function of your router. In case your router does not
have the built-in DHCP server function, it is
necessary to set up the network manually.
Otherwise, you cannot play back files stored on
components on the network. See “Setting the IP
address” on page 43.
About network playback
The network playback function of this unit uses the
following technologies:
∫ Windows Media Player
See Windows Media Player 12 above for more on this.
∫ DLNA
• BD-R/RE (BDAV format) discs
• DVD-R/RW (VR format) discs
• Audio CDs (CD-DA, SACD and DTS CDs)
• DVD/CDs on which only data files of video, image or
audio files, etc. are recorded.
• USB device
• Files on the network servers (on the PCs or
components connected to the player via LAN
interface.)
Note
• The Source function allows you to play files on
media servers connected on an identical Local Area
Network (LAN) as the receiver.
• The following files are allowed to be played from
Source function:
– PCs running Microsoft Windows 7 with Windows
Media Player 12 installed
– DLNA-compatible digital media servers (on PCs or
other components)
Files stored in a PC or DMS (Digital Media Server) as
described above can be played by Digital Media
Player (DMP). The player supports the use of such
DMP.
Files stored in a PC or DMS (Digital Media Server) as
described above can be played via command from
an external Digital Media Controller (DMC). Devices
controlled by this DMC to play files are called DMRs
DLNA CERTIFIED® Audio Player
The Digital Living Network Alliance (DLNA) is a crossindustry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing of
digital media through a wired or wireless network in the
home.
The DLNA certification logo makes it easy to find
products that comply with the DLNA Interoperability
Guidelines. This unit complies with DLNA
Interoperability Guidelines v1.5. When a PC running
DLNA server software or a DLNA compatible device is
connected to this player, some setting changes of
software or other devices may be required. Please refer
to the operating instructions for the software or device for
more information.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
∫ Content playable over a network
• Even when encoded in a compatible format, some
files may not play correctly.
• Some functions may not be supported depending on
the server type or version used.
31
En
BDP-X300_72-BDPX300-GBRB1_En.book
05
32 ページ
2016年8月8日 月曜日 午後3時16分
• Supported file formats vary by server. As such, files
not supported by your server are not displayed on
this unit. For more information check with the
manufacturer of your server.
∫ Disclaimer for Third Party Content
Access to content provided by third parties requires a
high speed Internet connection and may also require
account registration and a paid subscription.
Third party content services may be changed,
suspended, interrupted, or discontinued at any time
without notice, and Pioneer disclaims any liability in
connection with such occurrences.
Pioneer does not represent or warrant that content
services will continue to be provided or available for a
particular period of time, and any such warranty, express
or implied, is disclaimed.
∫ About playback behavior over a
network
• Playback may stall when the PC is switched off or
any media files stored on it are deleted while playing
content.
• If there are problems within the network environment
(heavy network traffic, etc.) content may not be
displayed or played properly (playback may be
interrupted or stalled). For best performance, a
10BASE-T/100BASE-TX connection between the
player and the PC is recommended.
2
Select [Source], and press ENTER.
3 Select the server which contains the file you
want to play.
4 Select the file you want to play.
Use 3/4 to select, then press ENTER.
∫ To end Source function
1 Press HOME MENU.
Disc/USB playback
1 Press HOME MENU to display the Home Menu
screen.
2
Select [Source], and press ENTER.
3 Select Disc or USB.
Use 3/4 to select, then press ENTER.
4 Select Photo/Music/Video/AVCHD.
Use 3/4 to select, then press ENTER.
• This step is not for the discs that have been recorded
with BDAV/VR/AVCREC format.
• Depending on the security software installed on a
connected PC and the setting of such software,
network connection may be blocked.
• To play files in AVCHD format on a USB device,
create a folder named “AVCHD” on the USB device,
then copy the “BDMV” folder containing which the
files to be played into the “AVCHD” folder.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United States
and/or other countries.
This product includes technology owned by Microsoft
Corporation and cannot be used or distributed without a
license from Microsoft Licensing, Inc.
Microsoft®, Windows®7, Windows®Vista,
Windows®XP, Windows®2000, Windows®Millennium
Edition, Windows®98, and WindowsNT® are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
En
1 Press HOME MENU to display the Home Menu
screen.
• If several clients are playing simultaneously, as the
case may be, playback is interrupted or stalled.
Pioneer is not responsible for any malfunction of the
player and/or the Source function features due to
communication errors/malfunctions associated with your
network connection and/or your PC, or other connected
equipment. Please contact your PC manufacturer or
Internet service provider.
32
Playback file on the
network
5 Select the title/track or file you want to play.
Use 3/4 to select, then press ENTER.
Playback starts from the selected title/track or file.
• If the file you want to play is in the folder, select the
folder that contains the file first.
BDP-X300_72-BDPX300-GBRB1_En.book
33 ページ
2016年8月8日 月曜日 午後3時16分
Playing back image files
Playing the Playlist
∫ About Slideshow
1 Press HOME MENU to display the Home Menu
screen.
A display of the files in the folder switches automatically.
2
Note
• Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for the
disc.
• It may take a few seconds before playback starts.
This is normal.
Select [Source], and press ENTER.
3 Select Playlist.
Use 3/4 to select, then press ENTER.
4 Select the track/file to be played.
Use 3/4 to select, then press ENTER.
• The number of views may be restricted.
Playback starts from the selected track/file and continues
until the end of the list is reached. Use :/9 to play
the previous or next track/file. The Now Playing screen is
displayed.
• Depending on the connected devices and
conditions, some time may be required for playback
to start and for the image to switch.
Deleting tracks/files from the
Playlist
• It may not be possible to play some files properly.
Playing in the desired
order (Playlist)
The discs that can add tracks and files to the Playlist are
as shown below.
• DVDs/CDs/USB devices on which audio files are
recorded.
Adding tracks/files
Use this procedure to add tracks and files, and create the
Playlist.
05
1 Select the track/file to be deleted, then press POP
UP MENU to display the POP UP MENU menu.
2 Use 3/4 to select Remove from Playlist, then
press ENTER.
Note
• In the following cases, all information in the playlist
will be deleted.
– When you open the disc tray.
– When you turn off the power.
1 Press HOME MENU to display the Home Menu
screen.
2
Select [Source], and press ENTER.
3 Select Disc or USB.
Load the disc beforehand.
Use 3/4 to select, then press ENTER.
4 Select the track/file to be added.
Use 1 to select.
5 Press POP UP MENU to display the POP UP
MENU menu.
6 Select Add to Playlist to add to Playlist.
Use 3/4 to select, then press ENTER.
The track or file selected in step 4 is added to the
Playlist.
• To add more tracks or files, repeat steps 4 to 6.
33
En
BDP-X300_72-BDPX300-GBRB1_En.book
06
34 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 6
Connecting by MiracastTM/Wi-Fi DirectTM
About MiracastTM/
Wi-Fi DirectTM
• In some cases, depending on the radio wave
environment conditions or mobile device you are
using, video and audio may be interrupted.
• In some cases, depending on the playback contents
and the connection environment, video and audio
may be interrupted.
About Wi-Fi
• In some cases, when performing an operation on your
mobile device, video and audio may be interrupted.
• As for the connection environment of Miracast/Wi-Fi
Direct, please confirm it on the connection screen.
• When Miracast/Wi-Fi Direct is being connected, the
connection to the Internet of this device is
temporarily interrupted.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
Note
• You can only connect one mobile device to the unit
at a time with this function.
The Wi-Fi Protected Setup Identifier Mark is a mark of
the Wi-Fi Alliance.
• If you want to connect a different mobile device, you
will first need to disconnect the one that is currently
connected.
Wi-Fi, Wi-Fi Protected Setup, Wi-Fi Direct, Miracast,
WPA, WPA2 are marks of the Wi-Fi Alliance.
• If the power to the unit is turned OFF (Standby) then
this function will be terminated, and network settings
will be returned to what they were before using this
function.
Use the unit’s Miracast/Wi-Fi
Direct functions
• In order to use this function your mobile device must
meet Wi-Fi specifications.
Miracast and Wi-Fi Direct are functions for connecting
your mobile devices to the unit without using a wireless
LAN router.
Miracast is a function that allows you to display the
videos on a mobile device as is on a large screen TV.
Wi-Fi Direct is a function that allows you to play back
photo, music, and video files stored on a mobile device
with the unit by installing a DLNA compliant application
on your mobile device.
Caution
• Depending on the model, a connection might not be
possible even for Miracast/Wi-Fi Direct compatible
models.
• The connection procedure for Miracast/Wi-Fi Direct
depends on the mobile device. For details, refer to
the instruction manual for the mobile device.
• Depending on the specifications of the mobile
device, or the type and version of the OS, it might not
be compatible with the Miracast/Wi-Fi Direct
function. For details, refer to the instruction manual
for the mobile device.
• Some copyright protected contents, etc., might,
depending on the type of content, not be displayed
by the television and the mobile device.
34
En
• The unit does not support mobile device control
using a specialist application.
Display the Miracast/Wi-Fi
Direct mode screen
1
Turn on the power of the TV.
2 Press Í STANDBY/ON to turn this unit's power
on.
The Pioneer logo appears on the TV screen.
Note
• If the Pioneer logo is not displayed, check the
following:
– If this unit is in the play mode, press ∫ STOP.
– If the Source function or home menu is displayed,
press HOME MENU to close the displayed screen.
3 Press Miracast to display the Miracast/Wi-Fi
Direct mode screen.
• Settings to connect the unit and mobile devices will
be started from this screen.
• Closing this screen will terminate the Miracast/Wi-Fi
Direct connection.
• Resume play will be canceled automatically if one
enters this screen.
BDP-X300_72-BDPX300-GBRB1_En.book
35 ページ
2016年8月8日 月曜日 午後3時16分
Connecting by Miracast
You can connect to your mobile device if it has Miracast
function in conformity with Wi-Fi standards.
Press Miracast to display the Miracast/Wi-Fi Direct
mode screen.
• As for Miracast, some of the functions have different
names depending on the mobile device. For details,
refer to the instruction manual for the mobile device.
1 Turn on the Miracast setting on your mobile
device.
A list of the devices that can be connected to the mobile
device is displayed on the mobile device screen.
2 Select the device name “DIRECT-xxBD/BDP-X300”
for the unit appearing on the TV screen from the list
displayed on your mobile device.
“xx” indicates the device’s identification number.
Caution
• If the name of the unit “DIRECT-xxBD/BDP-X300”
does not appear on your mobile device, press
RETURN on the remote control and then
Miracast and perform the controls again from the
Miracast/Wi-Fi Direct mode screen.
Connect to device not
compatible with Miracast/Wi-Fi
Direct
06
Normally connect using the procedure below.
1
Display the Miracast/Wi-Fi Direct mode screen.
2 At the Wi-Fi network settings on your mobile
device, select this unit's device name, as displayed
on the TV screen ("DIRECT-xxBD/BDP-X300").
“xx” indicates the device’s identification number.
Caution
• If the name of the unit “DIRECT-xxBD/BDP-X300”
does not appear on your mobile device, press
RETURN on the remote control and then
Miracast and perform the controls again from the
Miracast/Wi-Fi Direct mode screen.
3 On your mobile device, input this unit's
password, as displayed on the TV screen.
Note
• For instructions on operating your mobile devices,
see their respective operating instructions.
If the connection is successful, the screen of the mobile
device is also displayed on the TV.
Note
• For instructions on operating your mobile devices,
see their respective operating instructions.
35
En
BDP-X300_72-BDPX300-GBRB1_En.book
06
36 ページ
2016年8月8日 月曜日 午後3時16分
Connecting by WPS
Change SSID and password
If your mobile device supports WPS (by push-button
method), it can be connected.
Change the SSID and password used to connect the unit
and a mobile device.
1
Display the Miracast/Wi-Fi Direct mode screen.
2
Use 2/1 to select WPS, then press ENTER.
1 Press Í STANDBY/ON and the power to the unit
will come on.
The Pioneer logo will be displayed on the TV screen.
3
Use 2/1 to select Next, then press ENTER.
4 Within 2 minutes, turn on the mobile device’s
WPS setting.
Once the connection is completed, [Connection Success]
appears on the TV screen.
Note
• For instructions on operating your mobile devices,
see their respective operating instructions.
5 Press ENTER.
This completes the connection.
The Miracast/Wi-Fi Direct mode screen is displayed.
2 Press Miracast to display the Miracast/Wi-Fi
Direct mode screen.
3 Use 2/1 to select Refresh, then press ENTER.
SSID and password will be changed.
The connection between the unit and mobile device will
be terminated.
Caution
• All connection settings that have been setup for
mobile devices will be removed.
• The SSID and password will not change until an
update (Refresh) is performed. You should
periodically perform an update (Refresh) for security
reasons.
After the connection is terminated, when using the unit’s
Miracast/Wi-Fi Direct function again you will also need to
set up the connection again.
36
En
BDP-X300_72-BDPX300-GBRB1_En.book
37 ページ
2016年8月8日 月曜日 午後3時16分
Canceling the Miracast/Wi-Fi
Direct connection
While the Miracast/Wi-Fi Direct mode screen is
displayed, press
RETURN.
• The connection is canceled.
• The network settings set before using Miracast/Wi-Fi
Direct are restored.
Note
• To play discs, USB devices when connected by
Miracast/Wi-Fi Direct, close the Miracast/Wi-Fi
Direct mode screen.
Playing a mobile
device’s photos, music
or video files
06
Send the photos, music or video files from your mobile
device to this unit.
Note
• For instructions on operating your mobile devices,
see their respective operating instructions.
• Depending on the mobile device, you may have to
install software for transferring the photos, music or
video files.
• Depending on the software of the mobile device, it
may not work properly.
37
En
BDP-X300_72-BDPX300-GBRB1_En.book
07
38 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 7
Advanced settings
Changing the settings
Operating the Initial Setup
screen
2 Select and set Initial Setup.
Use 3/4 to select, then press ENTER.
1 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3 Select the item and change the setting.
Use 3/4/2/1 to select, then press ENTER.
∫ Closing the Initial Setup screen
Press
HOME MENU or
RETURN.
Note
• The items that can be selected depend on the player’s status.
• In Options, the factory default settings are indicated in bold.
Display Setting
Setting
Options
Explanation
TV Screen
16:9 Full
Select this when connecting to a wide (16:9) TV.
16:9 Normal
Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
4:3 Pan&Scan
Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The
video will be played with the left and right sides of the image cut off to display
on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)
4:3 Letterbox
Select this when connecting to a 4:3 screen TV and playing a 16:9 video.
The video will be played with black bands at the top and bottom.
Auto
[Auto] automatically outputs the screen resolution.
You can enjoy Blu-ray Discs and also videos on DVD with great picture
quality using the Upscaling function.
In other settings, the images are output according to the resolution of the
selected setting.
Resolution
480p/576p
720p
1080i
1080p
1080/24p
4K/24p
You can change the resolution by using the HDMI button on the remote
control. The resolution changes each time the HDMI button is pressed.
• When 1080/24p or 4K/24p is selected, the movement may be unnatural or the picture unclear, depending on the contents
being played back. In such cases, set the resolution to something other than 1080/24p or 4K/24p.
38
En
BDP-X300_72-BDPX300-GBRB1_En.book
39 ページ
2016年8月8日 月曜日 午後3時16分
Audio Output
Setting
Options
Explanation
Digital Output
Bitstream
Select this to output digital audio signals directly.
PCM
Select this to output digital audio signals converted to 2-channel audio
signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off
Select this to output audio signals other than digital audio signals.
Stereo
Surround audio signals converted to linear PCM audio signals are
converted into 2-channel (stereo) signals for output.
Lt/Rt
Surround for output (when the connected AV receiver or amplifier, etc., is
compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).
48k
Outputs audio signals that are limited to a sampling frequency below the set
sampling frequency from the DIGITAL OUT terminal. Select according to
the performance of the connected device.
Downmix
Max Sampling Frequency
96k
192k
07
• When playing back a sampling frequency file or a disk having a lower than or equal setting compared to the present setting,
you can output it at the unchanged sampling frequency.
• Sources with sampling frequencies of over 192 kHz cannot be played.
• When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,
regardless of this setting.
DRC (Dynamic Range
Control)*
Off
Select this to output audio signals without using the DRC function.
On
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
*
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• DRC affects audio signals output from the following audio output terminals:
– Analog audio signals output from the AUDIO OUT terminals
– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals
• Depending on the disc, the effect may be weak.
• The effect may differ depending on the speakers, the AV amplifier settings, etc.
HDMI
Color Space
HDMI Deep Color
HDMI Audio Out*
RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr 444
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB
Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform black.
Auto
Select when you want to automatically output the optimal bit color.
Off
Select this when outputting the video signals with normal 24-bit color.
Bitstream
Select this to output HDMI audio signals directly.
PCM
Select this to output HDMI audio signals converted to PCM audio signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off
Select this when you do not want to output the audio signal from the HDMI
output terminal.
*
• If Bitstream is selected, audio is not output from the ANALOG AUDIO OUT terminals when an SACD or DSD file is played.
Control
On
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 16.
Off
Select this when you do not want to control the player with the remote
control of the connected AV device using an HDMI cable.
To use PQLS, Sound Retriever Link and Stream Smoother Link function (pages 16), Control must be set to On.
39
En
BDP-X300_72-BDPX300-GBRB1_En.book
HDMI
07
40 ページ
2016年8月8日 月曜日 午後3時16分
Setting
Options
Explanation
HDMI 3D
Auto
With 3D discs, the disc is played with 3D images.
3D Notice
Off
3D images are not played.
Yes
This sets whether or not to display the 3D notice when playing 3D images.
No
Network
IP Address Setting
Select this to set the IP address of the player and DNS server (page 43).
Proxy Server
Only set the proxy server if so instructed by your Internet service provider (page 43).
Information
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection Test
Select this to test the network connection (page 43).
BD-Live Connection
Permitted
All discs are allowed to connect to BD-LIVE.
Partial Permitted
Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited
No disc is allowed to connect to BD-LIVE.
Enable
Select this when connecting to DLNA server.
DLNA
Language
Disable
Select this when not connecting to DLNA server.
Interface
Ethernet
Select when using a LAN cable to connect to the network.
Wireless
Select when connecting wirelessly to the network.
Wireless Setting
Perform settings for a wireless network connection (page 34).
OSD
available languages Choose a language for the on-screen displays from the listed languages.
Audio
available languages Choose a language from the listed languages to set the default audio
language for BD-ROM and DVD-Video playback.
* For some discs, it may not
be possible to change to the
selected language.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
Subtitle
available languages Choose a language from the listed languages to set the default subtitle
language for BD-ROM and DVD-Video playback.
* For some discs, it may not
be possible to change to the
selected language.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
Menu
available languages Choose a language from the listed languages to set the default language for
BD-ROM and DVD-Video menus.
* For some discs, it may not
be possible to change to the
selected language.
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.
40
En
BDP-X300_72-BDPX300-GBRB1_En.book
41 ページ
2016年8月8日 月曜日 午後3時16分
Playback
Setting
Options
Explanation
Angle Mark
On
Select this to display the angle mark on the TV screen (page 25).
Off
Select this if you do not want to display the angle mark on the TV screen.
PIP Mark
On
Select this to display the PIP mark on the TV screen.
Off
Select this if you do not want to display the PIP mark on the TV screen.
Secondary Audio Mark
® VOD DRM
DivX
Disc Auto Playback
Last Memory
On
Select this to display the secondary audio mark on the TV screen (page 28).
Off
Select this if you do not want to display the secondary audio mark on the TV
screen.
07
Displays the player’s registration code required to play DivX VOD files (page 10).
On
Discs are played automatically after they are loaded.
Off
Loaded discs do not start playing automatically.
On
Select this to save the point at which you last stopped playback, even after
the disc tray is opened or you switch to the standby mode.
Off
Select this when you want to use only Continue Viewing Play (page 29).
Use of a disk that does not support the function is not possible.
PBC (Play Back Control)
Setup Navigator
Security
Change Password
On
Select this to play Video-CDs (version 2.0) compatible with PBC using the
disc menu.
Off
Select this to play Video-CDs (version 2.0) compatible with PBC without
using the disc menu.
Start making the settings using the Setup Navigator menu. For details, see page 20.
Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with
the parental lock feature (page 42). The default password is “0000”.
Options
Parental Control
Change the player’s parental lock level (page 42).
Country Code
Change the Country/Area code (page 42).
FL Dimmer
Normal
Select the brightness of the main unit display window.
Slightly dimmed
Dimmed
Highly dimmed
Screen Saver
Off
The screen saver is not activated.
1 min
• The screen saver will be activated if no operation has been performed for
more than one minute/two minutes/three minutes.
• During operation of the screen saver, [SCNSVR] is displayed on the front
panel display.
• Operating the remote control can deactivate the screen saver.
2 min
3 min
Auto Power Off
Off
Select this if you do not want the power to turn off automatically. This is the
default setting for models other than European models.
15 min
The power will be automatically turned off if no operation has been
performed for more than 15 minutes/30 minutes. The default setting for
European models is 15 minutes.
30 min
Network Standby
Update
On
Select this function if you want to turn on the player from a mobile device
using a dedicated application (page 6).
Off
Select this if you do not want to use the Network Standby function
(described above).
USB Storage
Select the method of software updating (page 43).
Network
Load Default
Restore the settings to the factory default.
System Information
Check the system version number.
When you want to display the license of the software that you are using in the device, select
“License”.
BUDA
BUDA Information
Display and set up the BUDA data on the connected USB device (page 42).
BUDA Setup
41
En
BDP-X300_72-BDPX300-GBRB1_En.book
07
42 ページ
2016年8月8日 月曜日 午後3時16分
∫ Changing to other language at
language setting
3 Re-input the password.
Use the number buttons (0 to 9) to input the number,
then press ENTER to set.
1 Select and set Language.
Use 3/4 to select, then press ENTER.
Use 2/1 to move the cursor.
2 Select and set OSD, Audio, Subtitle or Menu.
Use 3/4 to select, then press ENTER.
3 Select and set the desired language.
Use 3/4 to select, then press ENTER.
Note
• If a language not recorded on the BD/DVD is set, one
of the recorded languages is automatically selected
and played.
∫ Erasing data that has been added to
BDs and application data
Use this procedure to erase data that has been added to
BDs (data downloaded with the BD-LIVE function and
data used with the BONUSVIEW function) and
application data.
Caution
• Some time is required to erase the data.
• Do not unplug the power cord while data is being
erased.
1 Select and set Options
BUDA
Use 3/4 to select, then press ENTER.
BUDA Setup.
2 Select and set Format.
Press ENTER.
∫ Registering or Changing the password
Use this procedure to register or change the code
number required for the Parental Lock settings.
About default password of this unit
The default password is “0000”.
• This unit might ask you to enter a password when
you change the password.
• If you reset this unit, your password is
simultaneously changed to the default setting.
1 Select and set Security
Change Password
Next Screen.
Use 3/4 to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number.
Use 2/1 to move the cursor.
42
En
• To change the password, input the previously
registered password, then input the new password.
Note
• We recommend making a note of the password.
• If you have forgotten the password, reset the player
to the factory default setting, then register the
password again (page 46).
∫ Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes of violence,
for example, have Parental Lock levels (check the
indications on the disc’s jacket or elsewhere). To restrict
viewing these discs, set the player’s level to the level
lower than the discs.
1 Select and set Security
Parental Control
Next Screen.
Use 3/4 to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) to input the number,
then press ENTER to set.
Use 2/1 to move the cursor.
3 Change the level.
Use 2/1 to change, then press ENTER to set.
Note
• The level can be set to Off or between Level1 and
Level8. When set to Off, viewing is not restricted.
∫ Changing the Country/Area code
1 Select and set Security
Country Code
Screen.
Use 3/4 to select, then press ENTER.
Next
2 Input the password.
Use the number buttons (0 to 9) to input the number,
then press ENTER to set.
Use 2/1 to move the cursor.
3 Change the country/area code.
Use 2/1 to change, then press ENTER to set.
BDP-X300_72-BDPX300-GBRB1_En.book
43 ページ
2016年8月8日 月曜日 午後3時16分
∫ Setting the IP address
1 Select and set Network
IP Address Setting
Next Screen.
Use 3/4 to select, then press ENTER.
2 Set IP address.
Use 3/4/2/1 to set the IP address of the player or
DNS server, then press ENTER.
• Auto Set IP Address
On – The player’s IP address is obtained
automatically. Select this when using a broadband
router or broadband modem that has a DHCP
(Dynamic Host Configuration Protocol) server
function. This player’s IP address will automatically
be allocated from the DHCP server.
Off – The player’s IP address must be set manually.
Use the number buttons (0 to 9) to input the IP
address, subnet mask and default gateway.
Caution
• Some time is required for the IP address setting.
Note
• Once the IP address is set, select [Connection Test]
to check that the unit is properly connected.
• For information on the DHCP server function, refer to
the operating instructions for the network device.
• You may need to contact your Internet service
provider or network administrator when inputting the
IP address manually.
∫ Setting the proxy server
Only set the proxy server if so instructed by your Internet
service provider.
1 Select and set Network
Proxy Server
Screen.
Use 3/4 to select, then press ENTER.
Next
2 Select and set Use or Not use at Proxy Server.
Use 2/1 to change, then press 4.
• Use – Select this when using a proxy server.
• Not use – Select this when not using a proxy server.
If you have selected Use, proceed to step 3.
3 Select and set Server Select Method.
Use 2/1 to change, then press 4.
• IP Address – Input the IP address.
• Server Name – Input the server name.
4 Input IP Address or Server Name.
Use the number buttons (0 to 9) to input the number if
you select IP address in step 3. Use 2/1 to move the
cursor.
07
When Server Name is selected in step 3, use the number
buttons (0 to 9) to launch the software keyboard. Now
use 3/4/2/1 to select characters and items, then
press ENTER to input.
5
Input Port Number.
Press 4, then use the number buttons (0 to 9) to
input the number.
6
Press ENTER to set.
∫ Displaying the network settings
1 Select and set Network
Information
Screen.
Use 3/4 to select, then press ENTER.
Next
The MAC address, IP address, subnet mask, default
gateway and DNS server (primary and secondary)
settings are displayed.
When Auto Set IP Address is set to On, the values
obtained automatically are displayed.
Note
• “0.0.0.0” is displayed when each IP address has not
been set.
∫ Testing the network connection
1 Select and set Network
Connection Test
Start.
Use 3/4 to select, then press ENTER.
“Network is OK.” is displayed once the test is completed.
If any other message is displayed, check the
connections and/or settings (pages 19 and page 43).
WPS setup (Wi-Fi
Protected Setup)
WPS connection setting
WPS is abbreviation of Wi-Fi Protected Setup. A
standard established by the Wi-Fi Alliance industry
group for a function allowing settings related to
interconnection of WPS compatible wireless LAN
devices and encryption to be made with simple
operations.
This unit supports push-button configuration and PIN
code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. This is the simplest way of making
the settings, and is possible when the WPS compatible
wireless LAN device is equipped with WPS button.
43
En
BDP-X300_72-BDPX300-GBRB1_En.book
07
44 ページ
2016年8月8日 月曜日 午後3時16分
PIN Input
Connection settings are made by inputting the 8-digit
PIN code shown on the main display to the access point
to which you selected. Follow the instructions shown in
Connecting using PIN code configuration on the right.
When performing wireless settings set Initial Setup
Network
Interface to Wireless.
1 Press HOME MENU.
The HOME MENU screen is displayed.
2 Use 3/4/2/1 to select Initial Setup and press
ENTER.
The Initial Setup screen is displayed.
3 Select Initial Setup
Network
Wireless
Setting
Next Screen and press ENTER.
A confirmation screen is displayed.
4 Use 2/1 to select Yes, then press ENTER.
The Wireless Setting screen is displayed.
5 Use 3/4 to select Auto, then press ENTER.
The WPS (Wi-Fi Protected Setup) screen is displayed.
6 Use 3/4 to switch between [ PBC] or [ PIN]
screens.
If WPS button is at the access point, it is recommended
you select [ PBC].
When connecting using PBC go to step 7.
When connecting using PIN go to step 8.
7 When connecting using PBC (Push Button), on
the [ PBC] screen use 2/1 to select Next, then
press ENTER.
Then press the WPS button on the access point within
120 seconds.
8 When connecting using PIN confirm the PIN
Code on the [ PIN] screen. Use cursor 2/1 to
select Next, then press ENTER.
9 Enter into the access point the PIN Code that you
confirmed in step 8 above.
The PIN Code input method differs depending on the
LAN device used. For details, consult the operating
instructions accompanying your LAN device.
44
En
Wireless network
connection
Wireless network setup
For the wireless network connection, the player needs to
be set up for network communication. This adjustment
can be done from the Setup menu. Adjust the
NETWORK setting as follow. Setting up the access point
or the wireless router is required before connecting the
player to the network.
∫ Preparation
Before setting the wireless network, you need to:
– set the access point or wireless router.
– note the SSID and security code of the network.
Note
• This unit conforms to the IEEE802.11b/g/n Wi-Fi
standards.
• Only 2.4 GHz is supported for the IEEE802.11n
standards.
1 Select Initial Setup
Network
Interface
Wireless and press ENTER.
• When making the wireless setting for the first time,
Wireless Setting is displayed. Proceed to step 4.
• When already set to Wireless, proceed to step 2.
2 Select Initial Setup
Network
Wireless
Setting
Next Screen and press ENTER.
3 Select Yes and press ENTER to continue.
The new connection settings reset the current network
settings.
4 Wireless Setting menu is displayed.
Use 3/4 to select Scan. Then select Next using the 2/
1 and press ENTER.
5 The player scans the all available access points
or wireless routers within range and display them as
a list. Use 3/4 to select an access point or wireless
router on the list, and then press ENTER.
• If you have security on your access point or wireless
router, verify that the WEP or WPA key that was
entered into the player matches the routerís
information exactly. You need to input the security
code as necessary.
BDP-X300_72-BDPX300-GBRB1_En.book
6
45 ページ
2016年8月8日 月曜日 午後3時16分
How to enter the security code.
1 Select the security code section using 3/4/2/1
and press ENTER to start the software keyboard.
Software updating
2 Use 3/4/2/1 to select characters and items,
and then press ENTER to input.
3 Select abc, ABC, or !@#$ using 3/4/2/1 to
switch to lower case characters, upper case
characters, or symbols.
4 Finish entering the security code by selecting
Enter using 3/4/2/1 and pressing ENTER.
• Connecting to the Internet.
• Using a USB flash drive.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 6 for
update and service information on your Blu-ray disc
player.
Caution
7 Select Next using 3/4/2/1 and press ENTER. If
it connects success, it will display connection
success and IP is obtained.
8
• Do not perform the actions below while the software
is being updated. Doing so will interrupt updating and
could lead to malfunction.
Pressing ENTER ends Wireless Setting.
– Disconnecting a USB memory device
– Unplugging the power cord
– Pressing the reset button.
• There are two processes for software updating,
downloading and updating. Both processes may
take a certain period of time.
Note
• WEP security mode generally have 4 keys available
on an access point or wireless routerís setting. If your
access point or wireless router use WEP security,
enter the security code of the key “No.1” to connect
on your home network.
• An Access Point is a device that allows you to
connect to your home network wirelessly.
Scan - The player scans the all available access points
or wireless routers within range and display them as a
list.
Manual - Your access point may not be broadcasting its
access point name (SSID). Check your router settings
through your computer and either set your router to
broadcast SSID, or manually enter the access point
name (SSID) in [Manual].
Auto - If your access point or wireless router that
supports the Push Button Configuration method, select
this option and press the Push Button on your access
point or wireless router within 120 seconds. You do not
need to know the access point name (SSID) and security
code of your access point or wireless router.
Note
• If there is no DHCP server on the network and you
want to set the IP address manually, Please refer to
Setting the IP address on page 43.
07
The player’s software can be updated using one of the
methods shown below.
• Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
∫ Updating connecting to the Internet
1
Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3 Select and set Initial Setup.
Use 3/4 to select, then press ENTER.
4 Select and set Options
Update
Start.
Use 3/4 to select, then press ENTER.
Network
5 Updating starts.
Press ENTER.
• Software updating may take a certain period of time.
• Before you connect to the Internet to update the
software, we recommend connecting a LAN cable
and selecting Ethernet (page 40).
• When updating is completed, the unit restarts
automatically.
45
En
BDP-X300_72-BDPX300-GBRB1_En.book
07
46 ページ
2016年8月8日 月曜日 午後3時16分
∫ Updating using a USB flash drive
Restoring all the settings to the
factory default settings
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive. Carefully read the instructions on
downloading update files provided on the Pioneer
website.
1
• Store the update file in the root directory of the USB
flash drive. Do not store it within a folder.
3 Select and set Initial Setup.
Use 3/4 to select, then press ENTER.
• Do not put any files other than the update file on the
USB flash drive.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB
flash drive on your computer, do so with the settings
below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension
cable may prevent the player from performing
correctly.
1 Plug in the USB flash drive on which the update
file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
3 Select and set Initial Setup.
Use 3/4 to select, then press ENTER.
4 Select and set Options
Update
Storage
Start.
Use 3/4 to select, then press ENTER.
USB
5 Updating starts.
Press ENTER.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
46
En
Check that the player’s power is turned on.
2 When playback is stopped, display the Home
Menu screen.
Press
HOME MENU.
4 Select and set Options
Load Default
Screen.
Use 3/4 to select, then press ENTER.
Next
5 Select and set OK.
Use 2/1 to select, then press ENTER.
Note
• After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 20).
• When disposing of the product, we recommend you
reset it to the factory default setting to delete the
data.
BDP-X300_72-BDPX300-GBRB1_En.book
47 ページ
2016年8月8日 月曜日 午後3時16分
About how digital audio formats are output
Setting
Method of
conversion
Output
terminal(s)
Bitstream
PCM
Re-encode
Only the primary audio (the
main sound for movies, etc.) is
output. The secondary audio
and interactive audio are not
output.
The primary audio, secondary
audio and interactive audio are
converted into PCM audio and
output simultaneously.
The primary audio, secondary
audio and interactive audio are
converted into PCM audio then
converted again into Dolby
Digital audio or DTS audio and
output simultaneously.1
HDMI OUT
terminal
DIGITAL OUT
terminal
HDMI OUT
terminal
Dolby Digital
Dolby Digital
Dolby Digital
PCM 5.1ch
Dolby Digital
Plus
Dolby Digital
Plus
Dolby Digital
PCM 7.1ch
Dolby TrueHD
Dolby TrueHD
Dolby Digital
PCM 7.1ch
DTS Digital
Surround
DTS Digital
Surround
PCM 5.1ch
DTS-HD High
Resolution
Audio
DTS-HD High
Resolution
Audio
DTS Digital
Surround
PCM 7.1ch
DTS-HD
Master Audio
DTS-HD
Master Audio
DTS Digital
Surround
PCM 7.1ch
DIGITAL OUT
terminal
HDMI OUT
terminal
DIGITAL OUT
terminal
Dolby Digital
Dolby Digital
DTS Digital
Surround
DTS Digital
Surround
Dolby Digital
07
AUDIO
OUTPUT
terminal
Audio type
DTS Digital
Surround
PCM 2 ch2
PCM
PCM 7.1ch
PCM 2 ch2
PCM 7.1ch
Dolby Digital
AAC
AAC
AAC
PCM 5.1ch
AAC
AAC
SACD (DSD)
DSD3
PCM 2 ch4
PCM 5.1ch
PCM 5.1ch
PCM 2 ch4
PCM 2 ch4
2 ch2
2 ch4
1. If there is no secondary audio or interactive audio, depending on the disc the signals may be output without being re-encoded.
2. For multi-channel audio, the sound is converted into 2-channel audio for output.
3. When Resolution is set to 480p/576p, or even when it is set to Auto, if the connected device does not support 480p or 576p, the DSD
multi-channel audio of SACDs is output in two channels, front left and front right (page 38).
DSD files (.dff/.dsf) are output in PCM 5.1ch sound when they are played.
4. When HDMI Audio Out is set to Bitstream, the sound is not output (page 39).
Note
• Depending on the disc, the number of channels may differ.
• Depending on the connected HDMI device, the HDMI output audio and number of channels may differ.
• The HDMI output audio and number of channels may differ when Resolution is set to 480p/576p, as well as
when set to Auto if the connected device only supports 480p or 576p.
• Three types of audio are recorded on BD video discs.
– Primary audio: The main sound.
– Secondary audio: Additional sound added supplementarily, such as comments by directors, actors, etc.
– Interactive audio: Sounds such as clicks heard when operations are performed. The interactive audio differs from
disc to disc.
47
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
48 ページ
2016年8月8日 月曜日 午後3時16分
Chapter 8
Additional information
Cautions on use
Turn the power off when not
using the player
Moving the player
Depending on the conditions of the TV broadcast
signals, striped patterns may appear on the screen when
the TV is turned on while the player’s power is turned on.
This is not a malfunction with the player or TV. If this
happens, turn the player’s power off. In the same way,
noise may be heard in the sound of a radio.
If you need to move this unit, first remove the disc if
there’s one loaded, and close the disc tray. Next, press
Í STANDBY/ON to switch the power to standby,
checking that the POWER OFF indication on the front
panel display goes off. Wait at least 10 seconds. Lastly,
disconnect the power cord.
Never lift or move the unit during playback — discs rotate
at a high speed and may be damaged.
Place of installation
Select a stable place near the TV and AV system to
which the unit is connected.
Do not place the player on top of a TV or color monitor.
Keep it away from cassette decks or other components
easily affected by magnetism.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot or cold places
• Places subject to vibration
• Places in which there is much dust or cigarette
smoke
• Places exposed to soot, steam or heat (in kitchens,
etc.)
∫ Do not place objects on top
Do not place objects on top of the player.
∫ Do not obstruct the ventilation holes
Do not use the player on a shaggy rug, bed, or sofa, and
do not cover the player with a cloth, etc. Doing so will
prevent heat dissipation and could lead to damage.
Condensation
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the temperature
in the room in which the player is installed rises suddenly
due to a heater, etc., water droplets (condensation) may
form inside (on operating parts and the lens). When
condensation is present, the player will not operate
properly and playback is not possible. Let the player
stand at room temperature for 1 or 2 hours with the
power turned on (the time depends on the extent of
condensation). The water droplets will dissipate and
playback will become possible.
Condensation can also occur in the summer if the player
is exposed to the direct wind from an air-conditioner. If
this happens, move the player to a different place.
Cleaning the player
Normally, wipe the player with a soft cloth. For tough dirt,
apply some neutral detergent diluted in 5 to 6 parts water
to a soft cloth, wring out thoroughly, wipe off the dirt, then
wipe again with a dry cloth.
Note that getting alcohol, thinner, benzene or insecticide
on the player could cause the print and coating to peel
off. Also, avoid leaving rubber or vinyl products in contact
with the player for long periods of time, as this could
damage the cabinet.
When using chemical-impregnated wipes, etc., read the
wipe’s cautions carefully.
∫ Keep away from heat
Unplug the power cord from the power outlet when
cleaning the player.
Do not place the player on top of an amplifier or other
device generating heat. When installing in a rack, to
avoid the heat generated by the amplifier and other
devices, place it on a shelf below the amplifier whenever
possible.
Caution for when the unit is
installed in a rack with a glass
door
Do not press the < OPEN/CLOSE on the remote control
to open the disc tray while the glass door is closed. The
door will hamper the movement of the disc tray, and the
unit could be damaged.
48
En
BDP-X300_72-BDPX300-GBRB1_En.book
49 ページ
2016年8月8日 月曜日 午後3時16分
Cleaning the pickup lens
The player’s lens should not become dirty in normal use,
but if for some reason it should malfunction due to dust
or dirt, consult your nearest Pioneer authorized service
center. Although lens cleaners for players are
commercially available, we advise against using them
since some may damage the lens.
∫ Condensation on discs
If the disc is moved suddenly from a cold place into a
warm room (in winter, for example), water droplets
(condensation) may form on the disc surface. Discs will
not play properly if there is condensation on them.
Carefully wipe off the water droplets from the disc
surface before using the disc.
08
Handling discs
Do not use damaged (cracked or warped) discs.
Do not scratch the disc’s signal surface or let it get dirty.
Do not load more than one disc into the player at a time.
Do not glue paper or put stickers onto the disc, or use a
pencil, ball-point pen or other sharp-tipped writing
instrument. These could all damage the disc.
∫ Storing discs
Always store discs in their cases, and place the cases
vertically, avoiding places exposed to high temperatures
or humidity, direct sunlight or extremely low
temperatures.
Be sure to read the cautions included with the disc.
∫ Cleaning discs
It may not be possible to play the disc if there are
fingerprints or dust on it. In this case, using a cleaning
cloth, etc., to wipe the disc gently from the center toward
the outer edge. Do not use a dirty cleaning cloth.
Do not use benzene, thinner or other volatile chemicals.
Also do not use record spray or antistatic agents.
For tough dirt, apply some water to a soft cloth, wring out
thoroughly, wipe off the dirt, then wipe off the moisture
with a dry cloth.
∫ Specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be used on this player. Never use such discs, as
they will damage the player.
49
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
50 ページ
2016年8月8日 月曜日 午後3時16分
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Inspect the other
components and electrical appliances being used. If the trouble cannot be rectified even after checking the points
below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Playback
Problem
Check
Remedy
• Disc does not play.
• Disc tray opens
automatically.
Is the disc one that is
playable on this player?
• Check whether the disc is one that can be played on this player
(page 7).
• Discs that have not been finalized cannot be played.
Is the file one that is playable • Check whether the file is one that can be played on this player
on this player?
(page 10).
• Check whether or not the file is damaged.
Is the disc scratched?
It may not be possible to play scratched discs.
Is the disc dirty?
Clean the disc (page 49).
Is there a piece of paper or The disc may be warped and unplayable.
sticker attached to the disc?
Is the disc properly set in the • Set the disc with the printed side facing up.
disc tray?
• Set the disc properly in the depression in the disc tray.
Is the region number
correct?
See page 9 for the region numbers of discs that can be played on this
player.
• Eliminate any condensation inside the unit (page 48).
• Depending on how the disc was recorded, the status of the pickup
and compatibility between the disc being used and this unit, it may not
be possible to play the disc properly.
• If the recorded time is short, it may not be possible to play the disc
properly.
• BD-RE/-R discs recorded in formats other than BDMV or BDAV
cannot be played.
No picture is displayed or the Is the HDMI cable properly
picture is not displayed
connected?
properly.
• Connect the cable properly according to the connected devices
(page 15).
• Disconnect the cable, then reinsert it firmly and all the way in.
Is the HDMI cable damaged? If the cable is damaged, replace it with a new one.
Is the input setting on the
Read the operating instructions for the connected components and
connected TV or AV receiver switch to the proper input.
or amplifier right?
Is the output video resolution Switch the resolution at which the video and audio are output by
properly set?
pressing HDMI.
Is the player connected with Connect the player to the TV using a High Speed HDMI®/TM cable.
an HDMI cable other than a
High Speed HDMI®/TM cable
(with a Standard HDMI®/TM
cable)?
Is the HQ Sound function
on?
Video is not output when the HQ Sound function is on (page 30).
Is a DVI device connected?
The picture may not be displayed properly if a DVI device is
connected.
Is Color Space properly set? Change the Color Space setting (page 39).
Playback stops.
50
En
• Playback may stop if the unit is subject to shocks or set in an
unstable place.
• Playback may stop when a USB device is connected or disconnected
during playback. Do not connect or disconnect USB devices during
playback.
BDP-X300_72-BDPX300-GBRB1_En.book
Problem
51 ページ
2016年8月8日 月曜日 午後3時16分
Check
Picture freezes and the front
panel and remote control
buttons stop working.
• Picture is stretched.
• Picture is cropped.
• Aspect ratio cannot be
switched.
Remedy
• Press ∫ STOP to stop playback, then restart playback.
• If the playback cannot be stopped, press Í STANDBY/ON on the
player’s front panel to turn off the power, then turn the power back on.
• If the power cannot be turned off (to standby), reset the unit. Use a
thin rod to press the reset button on the main unit’s front panel. When
the Reset button is pressed, power to the unit is turned off (standby
status). When the Í STANDBY/ON button is pressed to turn on the
power, the unit becomes operational again.
• It may not be possible to play scratched discs.
Is the TV’s aspect ratio
properly set?
Read the operating instructions for the TV and set the TV’s aspect
ratio properly.
Is TV Screen properly set?
Set TV Screen properly (page 38).
When video signals with a resolution of 4K24p, 1080/50i, 1080/50p,
720/50p, 1080/24p, 1080/60i, 1080/60p or 720/60p are being output
from the HDMI OUT terminal, they may be output with an aspect ratio
of 16:9 even if TV Screen is set to 4:3 Pan&Scan (page 38).
Picture is interrupted.
The picture may be interrupted when the resolution of the recorded
video signal switches. Set Resolution to something other than Auto
(page 21).
There is square noise
(pixelation) on the screen.
Due to the characteristics of digital image compression technology,
block-shaped images may stand out, for example in scenes where
there is fast movement.
The subtitles cannot be
switched.
The subtitles cannot be switched for discs recorded on a DVD or BD
recorder.
• No sound is output.
• Sound is not output
properly.
08
Is the volume set to the
minimum?
If the volume of the TV or AV amplifier is set to the minimum, raise it.
Is the disc played back in
No sound is output during slow motion play and forward and reverse
slow motion?
scanning.
Is the disc played back in fast
forward or fast reverse?
Are the audio cables
properly connected?
• Connect the cable properly according to the connected devices
(page 15).
• Insert the cable firmly and all the way in.
• If the connection plug or terminal is dirty, wipe it clean.
Is the audio cable damaged? If the cable is damaged, replace it with a new one.
Is Audio Output properly
set?
Set Audio Output properly, according to the connected device
(page 39).
Are the connected
Read the operating instructions for the connected components and
components (AV receiver or check the volume, input, speaker settings, etc.
amplifier, etc.) properly set?
Is HDMI Audio Out properly Set HDMI Audio Out to Re-encode or PCM. (page 39).
set?
Is the output video resolution Switch the resolution at which the video and audio are output by
pressing HDMI.
properly set?
Is a DVI device connected?
The sound will not be output from the HDMI OUT terminal if a DVI
device is connected. Connect the device to a DIGITAL OUT terminal
or the AUDIO OUT terminals (page 18).
• For some BDs, audio signals are only output from DIGITAL OUT
terminal or the HDMI OUT terminal.
• The sound may not be output for discs containing sound other than
audio signals or non-standard sound.
• When copy-protected discs are played, the picture or sound may not
be properly output. This is not a malfunction.
51
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
Problem
52 ページ
2016年8月8日 月曜日 午後3時16分
Check
Left/right audio channels are Are the audio cables
inverted or only one side is properly connected?
produced.
Multi-channel sound is not
output.
Remedy
Check whether the audio cables for the left and right channels are
inverted or whether the cable for one side is disconnected (page 18).
Is the audio output of the
Read the operating instructions for the connected AV receiver or
connected AV receiver or
amplifier and check the audio output settings of the AV receiver or
amplifier, etc., properly set? amplifier.
Is multi-channel sound
selected?
Use the menu screen or AUDIO to switch the disc’s sound to multichannel.
Noise can be heard when
Is the connected AV receiver If an AV receiver or amplifier that is not compatible with DTS Digital
outputting DTS Digital Audio or amplifier compatible with Surround is connected to the DIGITAL OUT terminal, set Digital
signals from the DIGITAL
DTS Digital Surround?
Output to PCM (page 39).
OUT terminal.
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminal.
Secondary audio or
interactive audio is not
output.
Audio is out of
synchronization
52
En
• Copyright-protected audio is converted to 48 kHz or less before
output.
• Set Max Sampling Frequency to 96KHz or 192KHz (page 39).
Is HDMI Audio Out properly When listening to the sound from an HDMI OUT terminal, set HDMI
set?
Audio Out to Re-encode or PCM (page 39).
Are Digital Output properly When listening to the sound from an DIGITAL OUT terminal, set
set?
Digital Output to Re-encode or PCM (page 39).
Are you listening to the audio
from a device connected with
an HDMI cable and a device
connected with a different
type of cable?
The PQLS function works when the conditions are met when you have
connected an Pioneer AV receiver that supports PQLS to the HDMI
OUT terminal (page 16).
This means that the audio will be out of synchronization with the audio
from devices connected with different types of cables. If this happens,
set Control to Off (page 39).
After a disc is inserted,
Are there too many files
Loading stays displayed
recorded on the disc?
and playback does not start.
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are displayed
in .
A message indicating low
memory appears while
playing a BD-ROM disc.
• Connect a USB device (page 18).
• Erase the data stored on the connected USB device from BUDA
Setup (page 42).
BDP-X300_72-BDPX300-GBRB1_En.book
53 ページ
2016年8月8日 月曜日 午後3時16分
Control function
08
Problem
Check
Remedy
Control function does not
work.
Is the HDMI cable properly
connected?
To use the Control function, connect the TV and AV system (AV
receiver or amplifier, etc.) to the HDMI OUT terminal (page 15).
Is the HDMI cable you are
Use a High Speed HDMI®/TM Cable. The Control function may not
using a High Speed HDMI®/ work properly if an HDMI cable other than a High Speed HDMI®/TM
TM Cable?
Cable is used.
Is this player connected to
If video signals are being output from a terminal other than the HDMI
the TV using an HDMI cable OUT terminal, the Control function does not work. Connect to the TV
to watch the picture?
using an HDMI cable (page 15).
Is Control set to On on the
player?
Set Control to On on the player (page 39).
Does the connected device • The Control function will not work with devices of other brands that do not
support the Control function? support the Control function, even when connected using an HDMI cable.
• The Control function will not work if devices that do not support the
Control function are connected between the Control-compatible
device and the player. See page 16.
• Even when connected to a Pioneer product compatible with the
Control function, some of the functions may not work.
Also refer to the operating instructions for the connected device.
Is Control set to On on the
connected device?
Set Control to On on the connected device. The Control function
operates when Control is set to On for all devices connected to the
HDMI OUT terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player’s picture is output to the TV. (Also, check after
changing the connected devices and connecting and/or disconnecting
HDMI cables.) If the player’s picture is not being output to the TV, the
Control function may not work properly.
For details, refer to the operating instructions of the connected device.
Are multiple players
connected?
The Control function may not work if 4 or more players, including this
player, are connected by an HDMI cable.
Depending on the connected device, the function may not work.
Network
Problem
Check
Remedy
Cannot connect to network.
• Insert the LAN cable securely as far as it goes (page 19).
• Do not connect using a modular cable. Use a LAN cable for the LAN
(10/100) terminal.
• Check that the power of the Ethernet hub (router with hub function)
or the modem is turned on.
• Check that the Ethernet hub (router with hub function) or the modem
is properly connected.
• Check the network settings.
BD-LIVE function
(connection to the Internet)
cannot be used.
• Check the network connections and settings.
• Connect a USB memory device.
• Delete data from the USB memory device.
• Check that the BD-ROM supports the BD-LIVE function.
• Test the connections (page 43). If "Network is OK" is displayed,
check the proxy server settings at [Initial Setup] -> [Network] -> [Proxy
Server] -> [Next Screen] (page 43). There may also be a problem with
the Internet connection. Contact your provider.
Software updating is slow.
Software updating fails.
Depending on the Internet connection and other conditions, some
time may be required to update the software.
If you are trying to connect to the Internet via a wireless LAN to update
the software, switch to a wired connection by connecting a LAN cable,
change the Ethernet setting (page 40), and then retry the update. If
you are trying to update the software by using a USB memory device,
re-download the update file to it.
53
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
Problem
54 ページ
2016年8月8日 月曜日 午後3時16分
Check
A message other than
Is “Network is FAILED.”
“Networks is OK.” is
displayed?
displayed when Connection
Test is performed.
Remedy
• Check that this player and the Ethernet hub (or router with a hub
functionality) are properly connected.
• If the IP address is obtained using the DHCP server function, check
the setting is correct at the Information (page 40). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
• Set the IP address manually.
• Check the operation and settings of the DHCP server function of the
Ethernet hub (or router with hub functionality). For details on the
DHCP server function, see the operating instructions for the Ethernet
hub (or router with a hub functionality).
• If this player has been set manually, reset the IP address of this
player or other components.
Is the Ethernet hub (or router • Check the settings and operation the Ethernet hub (or router with a
with a hub functionality)
hub functionality). For details, see the operating instructions for the
operating properly?
Ethernet hub.
• Reboot the Ethernet hub (or router with a hub functionality).
The audio files stored on
components on the network,
such as a computer, cannot
The audio component on the
be played back.
network which has been
switched off is switched on.
There are cases where a component with Internet security software
installed cannot be accessed.
Switch on the audio component on the network before switching on
this unit.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection
status is set to “Do not authorize”.
Check the audio files stored on the component connected to the
network.
Install Windows Media Player 12 on your computer.
Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4
AAC, or WMA. Note that some audio files recorded in these formats
may not be played back on this unit.
Audio files recorded in
MPEG-4 AAC are being
played back on Windows
Media Player 12.
Audio files recorded in MPEG-4 AAC cannot be played back on
Windows Media Player 12. Try using another server. Refer to the
operation manual supplied with your server.
Check whether the component is affected by special circumstances or
is in the sleep mode. Try rebooting the component if necessary.
Try changing the settings for the component connected to the network.
The folder stored on the
Check the folder stored on the component connected to the network.
omponent connected to the
network has been deleted or
damaged.
The audio files stored on
components on the network,
such as a computer, cannot
be played back.
Playback does not start.
Check the computer’s network settings, security settings, etc.
The component is currently
disconnected from this unit
or the power supply.
The computer is not properly The corresponding IP
operated.
address is not properly set.
Check whether the component is properly connected to this unit or the
power supply.
Switch on the built-in DHCP server function of your router, or set up
the network manually according to your network environment.
The automatic configuration process takes time. Please wait.
Cannot access Windows
Media Player 12.
54
En
You are currently logged
Instead of logging onto the domain, log onto the local machine.
onto the domain through your
computer with Windows 7
installed.
BDP-X300_72-BDPX300-GBRB1_En.book
Problem
55 ページ
2016年8月8日 月曜日 午後3時16分
Check
Video and audio playback
are undesirably stopped or
disturbed.
Remedy
Check whether the audio file was recorded in a format supported by
this unit.
Even audio files listed as playable on this unit may sometimes not be
played back or displayed.
08
Check whether the folder has been damaged or corrupted.
The LAN cable is currently
disconnected.
Connect the LAN cable properly.
There is heavy traffic on the Use 100BASE-TX to access the components on the network.
network with the Internet
being accessed on the same
network.
There is a connection routed • There may be a shortage of bandwidth on the 2.4 GHz band used by
through a wireless LAN on
the wireless LAN. Make wired LAN connections not routed through a
the same network.
wireless LAN.
• Install away from any devices emitting electromagnetic waves on the
2.4 GHz band (microwave ovens, game consoles, etc.). If this does
not solve the problem, stop using other devices that emit
electromagnetic waves.
55
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
56 ページ
2016年8月8日 月曜日 午後3時16分
Wireless LAN
Problem
Check
Network cannot be accessed This unit and wireless LAN
via wireless LAN.
router etc. are too far apart,
or there is an obstacle
between them.
There is a microwave oven
or other device generating
electromagnetic waves near
the wireless LAN
environment.
Remedy
Improve the wireless LAN environment by taking steps such as
moving the unit and wireless LAN router etc. closer together.
• Use the unit in a place away from microwave ovens or others device
generating electromagnetic waves.
• Avoid using devices generating electromagnetic waves as much as
possible when using the unit with a wireless LAN.
Multiple wireless devices are When connecting multiple wireless devices, their IP addresses must
connected to the wireless
be changed.
LAN router.
Connection settings between If the connection settings between the unit and the wireless LAN
the unit and the wireless LAN router etc. are not set up correctly, connection settings much be
router etc. are not set up
performed in order to connect the unit and the wireless LAN router etc.
correctly.
Cannot connect with the
Miracast/Wi-Fi Direct
function.
The IP address settings for
the unit and the wireless LAN
router etc. (including DHCP
settings) do not match.
• Check the IP address settings of the unit and the wireless LAN router
etc. (including the DHCP setting).
• If the unit’s DHCP setting is on, turn the unit’s power off, then turn the
power back on. Check that the IP address of the unit matches the
settings of the wireless LAN router etc.
• If the unit’s DHCP setting is off, set an IP address matching the
network of the wireless LAN router etc.
For example, if the wireless LAN router’s IP address is “192.168.1.1”,
set the unit’s IP address to “192.168.1.XXX” (*1), the subnet mask to
“255.255.255.0”, and the gateway and DNS to “192.168.1.1”.
(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and 248
that is not assigned to other devices.
The access point is set to
conceal the SSID.
In this case, the SSID may not be displayed on the access point list
screen. If not, set the SSID etc. by setting the wireless LAN settings
on the receiver manually.
The access point’s security
settings use WEP 152-bit
length code key or shared
key authentication.
The unit does not support WEP 152-bit length code key or shared key
authentication.
Is the Miracast/Wi-Fi Direct
Mode screen displayed on
the TV or is [READY]
displayed on the unitís
display window?
Press
RETURN on the remote control to close the Miracast/WiFi Direct Mode Screen. Then press Miracast and perform the controls
again from the Miracast/Wi-Fi Direct Mode Screen.
Check the SSID and
If an update was performed in the Wi-Fi Direct Mode screen or the unit
password in the Miracast/Wi- was restored to the default settings, the SSID and password will have
Fi Direct Mode screen.
changed.
Enter the newly set SSID and password on the mobile device.
Is the mobile device
compliant with Wi-Fi Direct
or Miracast?
Only mobile devices that are compliant with Wi-Fi Direct or Miracast
are supported.
Ask the manufacturer of the corresponding device whether the mobile
device is compliant with Wi-Fi Direct or Miracast.
Select [Refresh] on the Miracast/Wi-Fi Direct Mode screen and then
try connecting again.
• Turn off power (to stand-by mode) once then turn power back on.
• Insert a thin rod into the reset button on the front side of the main
body then reset the unit.
56
En
There is a connection on the Is the mobile device
mobile device but the mobile compliant with Miracast?
device video is not displayed
on the TV (Miracast
function).
Only mobile devices that are compliant with Miracast are supported.
Ask the manufacturer of the corresponding device whether the mobile
device is compliant with Miracast.
BDP-X300_72-BDPX300-GBRB1_En.book
57 ページ
2016年8月8日 月曜日 午後3時16分
Problem
Check
The audio or video is
interrupted (distorted) when
using DRM, Wi-Fi Direct, or
Miracast.
Is there a microwave oven or Improve the wireless LAN environment by taking steps such as
other device that generates moving the unit and mobile devices etc. closer together.
electromagnetic waves near
the unit?
Are the mobile device and
unit far away from each other
or is there an object between
them?
Remedy
08
• Use the unit in a place away from microwave ovens or others device
generating electromagnetic waves.
• Avoid using devices generating electromagnetic waves as much as
possible when using the unit with a wireless LAN.
When using wireless LAN, Wi-Fi Direct or Miracast, depending on the
environment (radiowave interference) during sending/receiving of a
large volume of data such as HD quality image files and WAV 192 kHz/
24 bit high quality audio files, images and sound may be interrupted
during playback.
Others
Problem
Check
Remedy
Power does not turn on.
Is the power cord properly
connected?
• Plug the power cord securely into the power outlet (page 19).
• Unplug the power cord, wait several seconds, then plug the power
cord back in.
The player’s power turns off Is Auto Power Off set to
automatically.
15 min/30 min?
If Auto Power Off is set to 15 min/30 min, the player’s power
automatically turns off if no operation is performed for the set amount
of time (page 41).
The player’s power turns on Is Control set to On?
automatically.
The player’s power may turn on together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player’s
power to turn on when the TV’s power is turned on, set Control to Off
(page 39).
This unit cannot be operated.
• Use within the specified usage temperature range (page 61).
• If the power cannot be turned off (to standby), reset the unit. Use a
thin rod to press the reset button on the main unit’s front panel. When
the Reset button is pressed, power to the unit is turned off (standby
status). When the Í STANDBY/ON button is pressed to turn on the
power, the unit becomes operational again.
The player cannot be
operated with the remote
control.
Are you operating the remote Operate from within 7 m of the remote control sensor.
control from a point too far
away from the player?
Are the batteries dead?
Unit heats up during use.
Replace the batteries (page 5).
Depending on the usage environment, the temperature of the unit's
cabinet may increase somewhat during use, but this is not a
malfunction and there is no need to worry.
Input of the connected TV
and AV system switches
automatically.
Is Control set to On?
The input of the TV and AV system (AV receiver or amplifier, etc.)
connected to the HDMI OUT terminal may automatically switch to the
player when playback starts on the player or the menu screen
(SOURCE, etc.) is displayed. If you do not want the inputs of the
connected TV and AV system (AV receiver or amplifier, etc.) to switch
automatically, set Control to Off (page 39).
Settings I have made have
been cleared.
• Have you disconnected the
power cord while the player’s
power was on?
• Has there been a power
failure?
Always press Í STANDBY/ON on the player’s front panel or
Í STANDBY/ON on the remote control and check that POWER OFF
has turned off from the player’s front panel display before
disconnecting the power cord. Be particularly careful when the power
cord is connected to the AC outlet on another device because the
player turns off in conjunction with the device.
57
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
58 ページ
2016年8月8日 月曜日 午後3時16分
Problem
Check
Remedy
USB (external storage)
device does not work with
this player properly.
Is the USB device properly
connected?
• Turn the player’s power off, then turn the power back on.
• Turn the player’s power off, then reconnect the external storage
device (page 18).
Is the USB device connected Do not use an extension cable. The player may not work properly with
via an extension cable?
it.
Is the external storage
External storage device may not work if connected to the USB port via
device connected to the USB a memory card reader or USB hub.
port via a memory card
reader or USB hub?
Does the external storage
device contain multiple
partitions?
External storage devices may not be recognized if they contain
multiple partitions.
Is the external storage
device write-protected?
Turn the player’s power off, then disable the write-protection.
Is the USB device’s file
system FAT32, FAT16 or
NTFS?
USB devices formatted in the FAT32, FAT16 or NTFS file system can
be used.
Some external storage devices may not operate.
58
En
BDP-X300_72-BDPX300-GBRB1_En.book
59 ページ
2016年8月8日 月曜日 午後3時16分
Glossary
08
∫ Angle (Multi angle)
∫ Dolby TrueHD
Up to 9 camera angles can be recorded simultaneously on BDROM or DVD-Video discs, letting you view the same scene from
different angles.
Dolby TrueHD is an audio format using lossless coding. With
BD-ROMs, up to 8 channels can be recorded at 96 kHz/24 bits,
or up to 6 channels at 192 kHz/24 bits.
∫ AVCHD (Advanced Video Codec High
Definition)
∫ DRM
See page 9.
∫ BDAV
Of the BD format, the Audio Visual Format Specifications for HD
digital broadcast recording is referred to as BDAV on this player
and in these operating instructions.
∫ BD-J
A technology for protecting copyrighted digital data. Digitized
videos, images and audio retain the same quality even when
they are copied or transferred repeatedly. DRM is a technology
for restricting the distribution or playback of such digital data
without the authorization of the copyright holder.
∫ DSD (Direct Stream Digital)
The Digital Audio encoding system found on SACDs, that
expresses the audio signals by the pulse density of one bit data.
See page 9.
∫ DTS Digital Surround
∫ BD-LIVE
DTS Digital Surround is an audio format to record 48 kHz/24 bits
audio signals in 5.1 channels.
See page 9.
∫ BDMV
Of the BD format, the Audio Visual Format Specifications
designed for pre-packaged high definition (HD) movie contents
is referred to as BDMV on this player and in these operating
instructions.
∫ BONUSVIEW
See page 8.
∫ Deep Color
See page 15.
∫ Default Gateway
A default gateway is a communication device such as a router
which passes data between networks. It is used to direct data to
networks on which the destination gateway is not explicitly
specified.
∫ DHCP (Dynamic Host Configuration
Protocol)
This protocol provides configuration parameters (IP address,
etc.) for computers and other devices connected to the network.
∫ DivX
See page 10.
∫ DNS (Domain Name System)
This is a system for associating Internet host names with IP
addresses.
∫ DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an audio format using lossy
coding. It can record 7.1 channels at 96 kHz/24 bits.
∫ DTS-HD Master Audio
DTS-HD Master Audio is an audio format using lossless coding.
With BD-ROMs, 7.1 channels can be recorded at 96 kHz/24 bits,
or 5.1 channels at 192 kHz/24 bits.
∫ Ethernet
A standard for local area networks (LANs) used to connect
multiple computers, etc. in the same location. This player
supports 10BASE-T/100BASE-TX.
∫ Frames and fields
A frame is the unit for one of the still pictures which compose
motion pictures. One frame consists of a picture of odd lines and
a picture of even lines called fields in video signal with interlaced
scan method (1080i, etc.).
∫ HDMI (High-Definition Multimedia Interface)
See page 15.
∫ Interactive audio
The audio signals recorded in the titles of BD-ROMs. They
include for example the clicking sound made when the menu
screen is operated.
∫ Interlaced scan
Dolby Digital is an audio format to record the sound in up to 5.1
channels with a fraction of the amount of data as compared to
linear PCM audio signals.
With this method, one picture is displayed by scanning it twice.
The odd lines are displayed in the first pass, the even lines are
displayed in the second, to form a single picture (frame).
Interlaced scan is indicated in this player and operating
instructions by an “i” after the resolution value (for example,
1080).
∫ Dolby Digital Plus
∫ IP address
∫ Dolby Digital
Dolby Digital Plus is an audio format for high-definition media.
Built on Dolby Digital, it combines the efficiency and flexibility to
provide high quality multi-channel audio. With BD-ROMs, up to
7.1 channels of digital sound can be recorded.
An address that identifies a computer or other device connected
to the Internet or local area network. It is represented a number
in four sections.
∫ Linear PCM
This is referred as the audio signals that are not compressed.
59
En
BDP-X300_72-BDPX300-GBRB1_En.book
08
60 ページ
2016年8月8日 月曜日 午後3時16分
∫ MAC (Media Access Control) address
∫ VC-1
A hardware identification number assigned specifically to the
network device (LAN card, etc.).
A video codec developed by Microsoft and standardized by the
Society of Motion Picture and Television Engineers (SMPTE).
Some BDs include videos encoded in this codec.
∫ MPEG (Moving Picture Experts Group)
The name of a family of standards used to encode video and
audio signals in a digital compressed format. The video
encoding standards include MPEG-1 Video, MPEG-2 Video,
MPEG-4 Visual, MPEG-4 AVC, etc. The audio encoding
standards include MPEG-1 Audio, MPEG-2 Audio, MPEG-2
AAC, etc.
∫ Multi-session
Multi-session/multi-border recording is a method of recording
two or more sessions/borders on a single disc. When recording
data on a disc, the unit comprising the data from the beginning
to the end of that instance of recording is called a session or
border.
∫ Parental Lock
See page 42.
∫ Picture-in-Picture (P-in-P)
This is a function for superimposing a sub video on the main
video. Some BD-ROMs include secondary video, which can be
superimposed on the primary video.
∫ Port number
This is a sub-address provided below the IP address for
simultaneously connecting to multiple parties during Internet
communications.
∫ Progressive scan
With this method, one picture is consisted of a single picture,
without dividing it in two pictures. Progressive scan provides
clear pictures with no flicker, in particular for still pictures that
contain much text, graphics, or horizontal lines. Progressive
scan is indicated in this player and operating instructions by a “p”
after the resolution value (for example, 576p).
∫ Proxy server
This is a relay server for ensuring fast access and safe
communications when connecting to the Internet from an
internal network.
∫ Region number
See page 9.
∫ Secondary audio
Some BD-ROMs include sub audio streams mixed with the main
audio stream. These sub audio streams are called “secondary
audio”. On some discs this secondary audio is recorded as the
audio for the secondary video.
∫ Secondary video
Some BD-ROMs include sub videos superimposed on the main
videos using the Picture-in-Picture function. These sub videos
are called “secondary video”.
∫ Subnet mask
This is used to identify which part of the IP address corresponds
to the subnet (a separately managed network). The subnet
mask is expressed as ‘255.255.255.0’.
∫ USB (Universal Serial Bus)
60
En
USB is the industry standard for connecting peripherals to PCs.
∫ x.v.Color
See page 15.
BDP-X300_72-BDPX300-GBRB1_En.book
61 ページ
2016年8月8日 月曜日 午後3時16分
Specifications
Model
08
BDP-X300
Type
Blu-ray 3DTM PLAYER
Rated voltage
AC 110 V to 240 V
Rated frequency
50 Hz/60 Hz
Power consumption
19 W
Power consumption (Standby)
Less than 0.5 W
Power consumption
(Standby, HDMI control On)
Less than 0.5 W
Power consumption
(Standby, Network Standby On, LAN connected)
2.3 W
Power consumption
(Standby, Network Standby On, Wireless LAN connected)
2.3 W
Power consumption
2.3 W
(Standby, HDMI control On, Network Standby On, LAN connected)
Power consumption (Standby, HDMI control On, Network Standby 2.3 W
On, Wireless LAN connected)
Weight
2.3 kg
External dimensions (including projecting parts)
435 mm (W) x 63 mm (H) x 250 mm (D)
Tolerable operating temperature
+5 °C to +35 °C
Tolerable operating humidity
Output terminals
HDMI
Audio outputs
Digital audio outputs
5 % to 85 % (no condensation)
1 set, 19-pin: 5 V, 250 mA
2-channel (left/right)
1 set, RCA jacks
Audio output level
200 mVrms (1 kHz, –20 dB)
Frequency response
4 Hz to 88 kHz (192 kHz sampling)
Optical
1 set, Optical digital jack
Coaxial
1 set, RCA jacks
LAN
1 set, Ethernet jack (10BASE-T/100BASE-TX)
Wireless LAN (internal antenna)
Integrated IEEE 802.11n (2.4 GHz band) wireless
networking access, compatible with 802.11b/g Wi-Fi
networks
USB
2 set, Type A
Note
• The specifications and design of this product are subject to change without notice.
• This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
• Corporation and product names mentioned herein are trademarks or registered trademarks of the respective
corporations.
61
En
BDP-X300_72-BDPX300-GBRB1_En.book
62 ページ
2016年8月8日 月曜日 午後3時16分
[European model only]
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
O&P Corporation
2-3-12, Yaesu, Chuo-Ku, Tokyo
104-0028, Japan
English:
Hereby, O&P Corporation, declares
that this BDP-X300 is in compliance with
the essential requirements and other
relevant provisions of Directive
1999/5/EC.
Suomi:
O&P Corporation vakuuttaa täten että
BDP-X300 tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen
mukainen.
Nederlands:
Hierbij verklaart O&P Corporation dat het
toestel BDP-X300 in overeenstemming is
met de essentiële eisen en de andere
relevante bepalingen van richtlijn
1999/5/EG.
EU Representative’s:
Pioneer Europe NV
Haven 1087, Keetberglaan 1,
9120 Melsele, Belgium
http://www.pioneer.eu
Dansk:
Undertegnede O&P Corporation erklærer
herved, at følgende udstyr BDP-X300
overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Deutsch:
Hiermit erklärt O&P Corporation, dass
sich dieses BDP-X300 in Übereinstimmung
mit den grundlegenden Anforderungen
und den anderen relevanten Vorschriften
der Richtlinie 1999/5/EG befindet".
(BMWi)
ǼȜȜȘȞȚțȐ
ȂǼȉǾȃȆǹȇȅȊȈǹ23&RUSRUDWLRQ
ǻǾȁȍȃǼǿȅȉǿ%'3;
ȈȊȂȂȅȇĭȍȃǼȉǹǿȆȇȅȈȉǿȈȅȊȈǿȍǻǼǿȈ
ǹȆǹǿȉǾȈǼǿȈȀǹǿȉǿȈȁȅǿȆǼȈȈȋǼȉǿȀǼȈ
ǻǿǹȉǹȄǼǿȈȉǾȈȅǻǾīǿǹȈǼȀ
Français:
Par la présente O&P Corporation
déclare que l’appareil BDP-X300 est
conforme aux exigences essentielles et
aux autres dispositions pertinentes de
la directive 1999/5/CE.
Italiano:
Con la presente O&P Corporation
dichiara che questo BDP-X300 è
conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
Svenska:
Härmed intygar O&P Corporation att
denna BDP-X300 står I överensstämmelse
med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Español:
Por medio de la presente O&P Corporation
declara que el BDP-X300 cumple con los
requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
BDP-X300_72-BDPX300-GBRB1_En.book
63 ページ
2016年8月8日 月曜日 午後3時16分
Português:
O&P Corporation declara que este
BDP-X300 está conforme os requisitos
essenciais e outras disposições da
Directiva 1999/5/CE.
ýHãWLQD
23&RUSRUDWLRQWtPWRSURKODãXMHåH
WHQWR%'3;MHYHVKRGČVH]iNODGQtPL
SRåDGDYN\DGDOãtPLSĜtVOXãQêPL
XVWDQRYHQtPLVPČUQLFH(6
(HVWL
.lHVROHYDJDNLQQLWDE23&RUSRUDWLRQ
VHDGPH%'3;YDVWDYXVWGLUHNWLLYL
1999/5/EÜ põhinõuetele ja nimetatud
GLUHNWLLYLVWWXOHQHYDWHOHWHLVWHOH
DVMDNRKDVWHOHVlWHWHOH
0DJ\DU
$OXOtURWW23&RUSRUDWLRQQ\LODWNR]RP
KRJ\D%'3;PHJIHOHODYRQDWNR]y
DODSYHW}N|YHWHOPpQ\HNQHNpVD]
(&LUiQ\HOYHJ\pEHO}tUiVDLQDN
/DWYLHãXYDORGD
$UãR23&RUSRUDWLRQGHNODUƝND
%'3;DWELOVW'LUHNWƯYDV(.
EnjWLVNDMƗPSUDVƯEƗPXQFLWLHPDUWR
VDLVWƯWDMLHPQRWHLNXPLHP
/LHWXYLǐNDOED
âLXR23&RUSRUDWLRQGHNODUXRMDNDG
ãLV%'3;DWLWLQNDHVPLQLXV
UHLNDODYLPXVLUNLWDV(%
'LUHNW\YRVQXRVWDWDV
0DOWL
+DZQKHNN23&RUSRUDWLRQMLGGLNMDUD
OLGDQ%'3;MLNNRQIRUPDPDOƫWLƥLMLHW
HVVHQ]MDOLXPDSURYYHGLPHQWLRƫUDMQ
relevanti li hemm fid-Dirrettiva 1999/5/EC.
6ORYHQþLQD
23&RUSRUDWLRQWêPWRY\KODVXMHåH
%'3;VSĎĖD]iNODGQpSRåLDGDYN\D
YãHWN\SUtVOXãQpXVWDQRYHQLD6PHUQLFH
(6
6ORYHQãþLQD
23&RUSRUDWLRQL]MDYOMDGDMHWD
%'3;YVNODGX]ELVWYHQLPL]DKWHYDPL
LQRVWDOLPLUHOHYDQWQLPLGRORþLOLGLUHNWLYH
(6
5RPkQă
3ULQSUH]HQWD23&RUSRUDWLRQ
declara ca acest BDP-X300 este in
conformitate cu cerintele esentiale si
alte prevederi ale Directivei 1999/5/EU.
ɛɴɥɝɚɪɫɤɢ
ɋɧɚɫɬɨɹɳɟɬɨ23&RUSRUDWLRQ
ɞɟɤɥɚɪɢɪɚɱɟɬɨɡɢ%'3;ɨɬɝɨɜɚɪɹ
ɧɚɨɫɧɨɜɧɢɬɟɢɡɢɫɤɜɚɧɢɹɢɞɪɭɝɢ
ɫɴɨɬɜɟɬɧɢɩɨɫɬɚɧɨɜɥɟɧɢɹɧɚ
Ⱦɢɪɟɤɬɢɜɚ(&
3ROVNL
1LQLHMV]\P23&RUSRUDWLRQRĞZLDGF]DĪH
%'3;MHVW]JRGQ\]]DVDGQLF]\PL
Z\PRJDPLRUD]SR]RVWDá\PL
VWRVRZQ\PLSRVWDQRZLHQLDPL
'\UHNW\Z\(&
1RUVN
23&RUSRUDWLRQHUNO UHUKHUYHGDW
XWVW\UHW%'3;HULVDPVYDUPHGGH
JUXQQOHJJHQGHNUDYRJ¡YULJH
UHOHYDQWHNUDYLGLUHNWLY()
ËVOHQVND
+pUPHèOêVLU23&RUSRUDWLRQ\ILUìYtDè
%'3;HUtVDPU PLYLè
JUXQQNU|IXURJDèUDUNU|IXUVHPJHUèDU
HUXtWLOVNLSXQ(&
+UYDWVNL
2YLPHWYUWND23&RUSRUDWLRQL]MDYOMXMH
GDMHRYDM%'3;XVNODGXRVQRYQLP
]DKWMHYLPDLRVWDOLPRGUHGEDPD
'LUHNWLYH(&
BDP-X300_72-BDPX300-GBRB1_En.book
64 ページ
2016年8月8日 月曜日 午後3時16分
© 2016 Onkyo & Pioneer Corporation.
All rights reserved.
<Japan>
2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN
<U.S.A.>
18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
Tel: 1-201-785-2600 Tel: 1-844-679-5350
<Germany>
Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany
Tel: +49(0)2154 913222
<UK>
Anteros Building, Odyssey Business Park, West End Road, South Ruislip, Middlesex, HA4 6QQ United Kingdom
Tel: +44(0)208 836 3612
<France>
6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE
Tel :+33(0)969 368 050
Корпорация О энд Пи
2-3-12, Яэсу, Чуо-ку, г. Токио, 104-0028, ЯПОНИЯ
“Pioneer” is a trademark of Pioneer Corporation, and is used under license.
F1605-0
* 2 9 4 0 2 5 8 7 *
SN 29402587
Printed in China
<72-BDX300-GBRB2>

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement