Recommended Vehicle Mounting Solution Work - Gamber

Recommended Vehicle Mounting Solution Work - Gamber
Recommended Vehicle Mounting Solution
Work Truck Console
Rugged Solutions:
Heavy-Duty Vehicle
Bases & Pedestals
Equipment Console
Boxes
Computer Cradles &
Docking Stations
Follow us on:
Work Truck Console System
Rugged Docking Stations and Vehicle Mounts
Solution Components:
1. Work Truck Console Box
(Item No. 7170-0125)
Console box is designed to hold 2 to
4 radios. A locking storage box for
hanging folders, supplies and other
devices is included. Console box comes
with armrest, internal cupholder and top
plate. Console box comes with 3 blank
filler panels and 3 faceplates. Vehicle
Leg Kits (ordered separately) attach the
console box to the vehicle.
4
5
2. Vertical Surface Mount
(Item No. DS-138)
The Vertical Surface Mount attaches to
the side of the console box to create a
pole system for a computer.
3
3. Upper Pole
(Item No. 7160-0177)
Center Upper Pole allows for closer
mounting to the dash and less stress
on the vehicle mounting equipment as
gravity is centered on the pole. Wrench
is needed for loosening, tightening or
height adjustment.
1
2
Gamber-Johnson is the leading manufacturer of quality, rugged docking
stations and vehicle mounts. The solution shown is the recommended
solution, however the components can be mixed and matched so you can
design the solution that fits your specific requirements. Visit Gamber-Johnson’s
website at www.gamberjohnson.com to view the complete line of vehicle
mounts, console boxes and docking stations.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
4. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around
360° with locking points every 15°. Slide
Arm can extend out from 9” to 13” from
center pole and locks automatically
in the retracted 9” position. Motion
Attachment has tilt capabilities up
to 90° forward/26° backward and
can be swiveled up to 360°. Motion
Attachment works with VESA 75mm,
Gamber-Johnson 2x4, NEC or AMPS hole
patterns.
5. Accessories
Gamber-Johnson offers a variety of
accessories for the console box including
LED lights, mic clips, cigarette adapter
kits and power distribution blocks.
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2015 Gamber-Johnson, LLC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement