Husky H4930SSG Installation Guide

Add to my manuals
1 Pages

advertisement

Husky H4930SSG Installation Guide | Manualzz

Installation

1

Cleaning the air hose

□ A 1/4” air hose is required, with a maximum length of 25 ft.

□ Clean the air hose of accumulated dust and moisture before connecting it to the air supply.

NOTE: If a longer air hose is required, connect a 3/8" air hose to the 1/4" air hose to ensure the spray gun has the necessary air supply.

2

Connecting to the air supply

□ Always use clean dry air. Excessive moisture and dirt will greatly reduce the life of any air motor. We recommend the as possible.

□ secured tightly.

WARNING: Lubricators should not be used with spray guns. The use of an inline lubricator will damage the paint

.

Recommended Air Line Set-Up

Part Description

A

B

Spray Gun

Regulator

E

F

C

D

G

Quick Plug

Quick Coupler

Air Hose

In-line Filter

Air Compressor

5 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement