- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- User manual
advertisement
8 CAMERA 24VAC POWER SUPPLY
P3AC24-8-4L
P31002-02/11
PRODUCT SPECIFICATION
DESCRIPTION
The P3AC24-8-4L is a CCTV power supply and distribution module. It is designed with 8 individually fused outputs for powering CCTV cameras and accessories. It will provide
24VAC via distibution to 8 fused outputs with a total of 4.0
Amps continuous supply current.
FEATURES
˙
R
Listed (UL 2044).
˙ Input 115VAC 50/60Hz 0.9 Amps.
˙ 4 Amps 100VA supply current.
˙ Eight (8) 24VAC individually fused outputs.
˙ Output fuses are rated at 3 Amps.
˙ Main fuse is rated at 5 Amps.
˙ Surge protected outputs.
˙ AC power LED indicator.
˙ Individual LED’s for each output.
˙ Power ON/OFF switch.
˙ Spare fuses included.
˙ Unit maintains camera synchronization.
˙ Ease of installation saves time and eliminates costly labor.
F1
F2
FU
SE
D
OU
TP
UT
S
F3
F4
CO
MM
ON
O
UT
PU
TS
X'
FM
R
F1
F2
FU
SE
D
OU
TP
UT
S
F3
INSTALLATION INSTRUCTIONS
˙ Mount the P3AC24-8-4L in desired location and secure.
YE
BLU
LLO
E
W
˙ Slide switch to OFF position.
˙ Connect the AC 115VAC 50/60Hz to the black and white flying leads of the transformer connect the green to an earth
WH
CK
ITE ground.
˙ Connect each camera to terminals 1 to 8 marked 1 to 8 (+ & -).
˙ Slide switch to ON position.
˙ Green LED will illuminate when AC power is present.
˙ Red individual LED’s will light when cameras or accessories are present and powered.
˙ Upon completion of wiring, secure enclosure door with catch.
F4
WARNINGS
˙ To reduce the risk of fire or electric shock. Do not expose this unit to rain or moisture. This installation should be made by qualified service personnel and should conform to all local codes and in accordance with the National Electrical Codes. For continuous protection against hazard, replace only with same type and rating of fuse.
˙ The power cord included with this power supply is intended for temporary testing purposes only.
˙ Before testing, ensure that the enclosure has been properly grounded as per local and National
Electrical Codes.
˙ This product must be installed by qualified personnel in accordance with all local and National
Electrical Codes.
Class 2 wiring only
CAUTION:
Risk of fire replace fuse as marked
COMMERCIAL
CCTV EQUIPMENT
E241841 14CU
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Enclosure Dimensions:
Appendix list:
Item Description
1
2
3
4
5
Instruction Sheet
AC core
Screw
Spare fuse
Spare fuse
Dimension
A4
180cm
#8-5/8
3 Amps
5 Amps
Volume
1
1
2
1
1
Memo
P3 is not responsible for any typographical errors. Product specifications are subject to change without notice
P31002-02/11
3139 MacArthur Blvd Northbrook IL 60062 Ph: 877-478-4733 Fax 847-205-1113 www.pthree.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project