Citristrip HCG73803T Instructions / Assembly

Citristrip HCG73803T Instructions / Assembly
 DIRECTIONS FOR USE:
1. Protect hands with chemical-resistant gloves and eyes with chemical splash goggles.
à. Shake well. Pour into a metal container and apply with a paint brush.
3. After 30 minutes (Up to 24 hours), scrape a small test area to see if finish is ready for removal. Gently
scrape in direction of wood grain with a plastic stripping tool. For stubborn areas, use an abrasive stripping
pad dipped into CITRISTRIP® Paint & Varnish Stripper. A toothbrush, toothpick or stripping brush will help
remove old finish buried in recesses.
4. Use a paint stripper wash or Odorless Mineral Spirits with an abrasive stripping pad to loosen remaining
residue. Surface should be completely clean and dry before refinishing.
Ra
Helpful Tips: Test in an inconspicuous area before use on any plastic or synthetic surface as strippers can
damage these surfaces. For best results, use in temperatures between 65 and 85°F and away from strong
breeze and hot sun. Protect surrounding areas with a heavy plastic drop cloth.
Disposal: Allow liquid to evaporate and residue to dry outdoors. Then dispose of in accordance with local,
state and federal regulations.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement