Support arm system CP-L
Operating housings
Features
Modern, flexible production technology demands solutions
which precisely meet the required standards of ergonomics,
user-friendliness, hygiene and corrosion protection at the
operating interface. The Rittal Command Panel range is
tailored to these requirements. Supplemented by a support
B
1.4
arm or pedestal system, system accessories or system
Operating housings
climate control, an enclosure becomes a complete solution.
All this is achieved quickly and practically on your behalf.
Compact Panel, aluminium
Front panels are inserted from
the rear and secured with a
screw clamp.
Rear door hinged optionally on
the right or left by loosening the
screws.
CP pedestal, height adjustable,
the ideal attachment for light
operating units. Adjustment
range 200 mm, swivel area
max. 180°,
see page 1136.
The cable conduit ensures safe
cable routing between the
machine and the operating
console,
see page 1065.
Mounting optionally on support
arm system CP-S or directly with
the wall attachment, vertically
hinged, see page 977.
Quickline Panel
Simple door opening:
Release the hinge pins from the
outside with a screwdriver,
and it’s done.
228
Simple attachment of TS 8
system accessories with the
mounting bracket CP 6205.100,
see page 1004.
Rittal Catalogue 32/Industrial Enclosures
Operating housings
Features
Command Panel housing with door, with handle strips
B
Rear panel with welded nuts
for the attachment of mounting
plate or support rails.
Space for tools, measuring
instruments or scanners with the
utility shelf, screw connection,
see page 1123.
Operating housing with handle strips
Interior installation of the enclosure via side mounting angles
with system punchings.
Additional installation space
is created by the perforated
mounting strips on both sides
in the rear door.
The support arm bracket 90°
CP-L may be used for external
mounting of compact support
arm systems, see page 254.
Operating housing with display panel front
For installation or servicing, the
hinged display panel front may
be opened from the inside by
loosening the screws.
Interior installation of the enclosure via side mounting angles
with system punchings.
For the support of keyboards.
For programming and servicing
work, the vertically hinged utility
bars, CP 6514.200, may be
externally mounted,
see page 1140.
Operating housing with wide VIP 6000 frame
External mounting of VIP keyboard housings via frame
connectors, rigid or adjustable,
see page 225.
Rittal Catalogue 32/Industrial Enclosures
Interior installation of the enclosure via side mounting angles
with system punchings.
The interface flap SZ 2482.200
ensures secure accommodation
of sockets, ports or drives,
see page 1150.
229
1.4
Operating housings
For additional aluminium front
panels, the handle strips may be
set forward by up to 5 mm.
Operating housings
Features
Premium Panel, stainless steel (may be found in the stainless steel section on page 311)
IP 69 K
B
1.4
Operating housings
Exceptionally hygienic, thanks to
easy-to-clean, external, highly
resistant silicone seal.
Pressure washer-resistant
(protection category IP 69K to
DIN 40 050-9) and high EMC
shielding effect thanks to ideal
shaping of the seal and all-round
metallic contact between the
enclosure and the rear panel.
1
Clear hygiene benefits compared with external hinges,
rear panel bracket CP 6682.000,
see page 962.
Suitable for use in clean rooms
to meet the most demanding
requirements, certified by the
Fraunhofer-Institut IPA.
2
Screw fastening of the rear
panel optionally via external
hex screws 1 or internal
screws, concealed with plastic
stoppers 2.
Protected cable routing from
the operating housing to the
keyboard housing via a robust
duct connector.
Operating housing with door, stainless steel (may be found in the stainl. steel section on p. 312)
Rear panel with welded nuts
for the attachment of mounting
plate or support rails.
230
Simple mounting on the support
arm system CP-S stainless steel
by locating the pre-assembled
screw in the cut-out.
Safe handling when swivelling,
thanks to side handle strips.
Rittal Catalogue 32/Industrial Enclosures
Compact Panel
H
L
S
B
B
1.4
3
T
2
For small operating units built
into front panels. The front panel
is inserted from the rear and
secured with screw clamps.
Special front panels with a material thickness of between 2 and
6 mm are possible. Rear panel
optionally hinged on the left or
right.
Material:
Roof tray, base tray, rear panel:
Aluminium
Side parts:
Extruded aluminium section
Screw cover:
Plastic
Surface finish and colour:
Roof tray, base tray, side parts:
Powder-coated, RAL 7024
Rear panel: Natural-anodised
Screw cover:
Similar to RAL 7024
Protection category:
IP 65 to EN 60 529/09.2000
Supply includes:
Roof tray, base tray, rear panel,
side parts, screw cover, including seal and screw clamp.
Compact Panel
1
Assembly examples:
with wall mounting bracket
Rittal service:
● Other RAL colours
● Holes and cut-outs in the roof
and base tray
Detailed drawing,
see page 1215.
Property rights:
German patent
no. 102 16 448
German patent
no. 102 16 366
with support arm connection
Width (B) mm
Packs of
Height (H) mm
241
241
241
315
315
238
388
521
238
388
Depth (T) mm
To fit
Front panel width mm
87
87
87
87
178
178/4 U
252
252
200
350
482.6/19″
200
350
1 Model No. CP
(with support arm connection CP-S)
1
6340.000
6340.100
6340.2001)
6340.300
6340.400
Model No. CP1)
(with support arm connection CP-L,
120 x 65 mm)
1
6340.010
6340.110
6340.210
6340.310
6340.410
1
6340.020
6340.120
6340.220
6340.320
6340.420
2.8
3.8
4.5
3.4
4.5
2
Front panel height mm
87
178
3 Model No. CP1)
(without support arm connection)
Weight (kg)
Page
Accessories
Front panel, 3.0 mm aluminium, natural-anodised
1
6028.500
6028.510
6028.520
6028.530
6028.540
1 set
6341.000
6341.000
6341.000
6341.000
6341.000
977
1
6510.500
–
–
6510.500
–
1136
Cover plate for support arm connection CP-S
1
6505.200
6505.200
6505.200
6505.200
6505.200
1124
Spring nut M5
50
6108.000
6108.000
6108.000
6108.000
6108.000
1011
Wall mounting bracket, vertically hinged
Pedestal, height-adjustable
Cable conduit and accessories
see page
1120
1065
1) Extended delivery times.
To order different heights for front panel width:
– 178 mm use Model No.: CP 6342.109
– 252 mm use Model No.: CP 6342.209
and additionally specify the front panel height. Extended delivery times.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286
Rittal Catalogue 32/Industrial Enclosures
231
Quickline Panel
T1
B1
T1
B1
B
H2
H2
T2
H1
H1
B2
H2
B2
T2
Quickline Panel
1.4
CP 6690.500
The Command Panel
for every occasion
● Support arm cut-out may be
at the top or bottom by simply
refitting:
− Door with one aperture:
Simply rotate, and swap
over the door hinge if
necessary.
− Door with two apertures:
Remove the door, rotate the
enclosure, exchange the
lock parts, and re-attach the
door.
● Standard support arm cut-out
CP-L Ø 130 mm, easily
swapped for a larger support
arm system CP-XL/CP/Q by
drilling 4 holes.
● Hinges right and left with
multiple function:
− Door hinging on l/h or
r/h side.
With symmetrical
enclosures, by rotating
the enclosure body against
the door.
Direct Command Panel
mounting:
Door with one aperture:
CP 6691.500
● Siemens Simatic:
− Panel PC 477, 577, 677B
(12″ keys,
15″ touchscreen),
− OP 277 10″,
− MP 277B 10″ keys,
− MP 377B 12″ keys.
Door with two apertures:
− MCP 483C,
− MCP 483,
− PP 012.
Rittal service:
Material:
Enclosure and door:
Sheet steel
● Siemens Sinumerik:
− OP 010,
− OP 010 C,
− OP 012,
− OP 015.
Other dimensions and apertures
for different controllers available
on request.
Surface finish:
Dipcoat-primed, powdercoated in textured RAL 7035
on the outside
Width (B1) mm
Supply includes:
Enclosure with cut-out and
reinforecement, prepared for
support arm system CP-L
Ø 130 mm, door with foamed
seal, threaded bolts in all
4 corners for flexible interior
installation via mounting
brackets (see table).
Detailed drawing,
see page 1215.
575
Height (H1) mm
383
Depth (T1) mm
Page
538
191
For installation panel W x H
482.6 mm (19″) x 310 mm (7 U)
482.6 mm (19″) x 310 mm (7 U)
+ 482.6 mm (19″) x 155 mm (3.5 U)
450 mm x 290 mm
450 mm x 290 mm
+ 450 mm x 137.5 mm
Cut-out size B2 x H2
Installation depth (T2) mm
185
Support arm connection
Top
Top
6690.500
6691.500
6205.100
6205.100
1004
8612.160
8612.160
993
–
8612.150
993
horizontal
4696.000
4696.000
997
vertical
4594.000
4695.000
997
Model No. CP
Accessories
Mounting bracket for the installation of punched section with
mounting flange and TS support strips
Punched section with mounting flange
TS mounting bars
horizontal
vertical
Fast service and good access
● Simple door opening:
Release the hinge pins from
the outside with a screwdriver, and it’s done.
● Easy door removal:
Open the door, release the
hinge pins and remove.
Perfect interior installation
● Use of TS 8 system accessories: TS punched sections
with mounting flanges and
TS supports strips, for vertical or horizontal installation
(see table).
● Simple attachment with
mounting bracket
CP 6205.100.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286
232
Rittal Catalogue 32/Industrial Enclosures
Command Panel housing with door
based on AE
B1
B1
H1
H1
T1
B
Material and surface finish:
Enclosure and door:
Sheet steel, dipcoat-primed
and powder-coated in
textured RAL 7035
Handle strips:
Aluminium, powder-coated in
RAL 5018
Cover caps:
Plastic, RAL 5018
Supply includes:
Enclosure with cut-out and
reinforcement for support arm
system CP-L1), Ø 130 mm,
with seal.
Door with sealing frame, side
handle strips and end caps.
Note:
The support arm connection and
door hinge may be swapped
over by rotating the enclosure.
Protection category:
IP 55 to EN 60 529/09.2000
Width (B1) mm
Packs of
Height (H1) mm
Depth (T1) mm
Model No. CP1)
1
Weight (kg)
Command Panel housing with door
1.4
Detailed drawing,
see page 1216.
Rittal service:
● Other sizes
● Other RAL colours
● Modified support arm cut-out
or door hinge
● Drilled holes and cut-outs for
keypads and operator panels
● Aluminium front panels
(up to 5 mm thick, may be
positioned on the enclosure
front between the side handle
strips and door)
available on request.
Approvals,
see page 38.
300
300
300
400
400
500
200
300
400
300
400
500
180
180
180
180
180
180
6534.000
6535.000
6537.000
6536.000
6538.000
6544.000
5.5
7.1
8.4
8.4
10.6
14.5
Page
Accessories
Matching mounting plate
Support
rails2)
AE type
1032.500
1033.500
1034.500
1030.500
1380.500
1050.500
Model No.3)
0271.324
0271.926
0271.927
0274.131
0271.548
0271.333
2316.000
2316.000
2316.000
2317.000
2317.000
2318.000
Model No.
10
128/129
1002
Lock systems
Standard double-bit lock insert may be exchanged for 41 mm lock inserts, plastic handle and T handle, type C,
see page 954 – 956.
1) To
order a Command Panel housing with door with mounting cut-out CP-S, please use the extension number .080.
Delivery times available on request.
with vertical attachment of punched rail 23 x 23 mm, see page 998.
3) Delivery times available on request.
2) Only
Signal pillar LED compact.
Model No. see page 1125.
Utility bars, vertically hinged
for keyboards.
Model No. see page 1140.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286 Command Panel housing with door, stainless steel Page 312
Rittal Catalogue 32/Industrial Enclosures
233
Command Panel
based on AE
B1
H1
T1
B
Command Panel
1.4
Material and surface finish:
Enclosure and door:
Sheet steel, dipcoat-primed
and powder-coated in
textured RAL 7035
Handle strips:
Aluminium in RAL 7030
Cover caps:
Plastic, RAL 7030
Protection category:
IP 55 to EN 60 529/09.2000
Supply includes:
Enclosure with cut-out and
reinforcement for support arm
system CP-L, Ø 130 mm and
with mounting angles spot
welded at the sides.
Front with maximum cut-out,
covered with easily machinable
3 mm aluminium front panel and
side handle strips with end
caps.
Rear with door.
Rittal service:
● Other sizes
● Other RAL colours
● Modified support arm
cut-out or door hinge
● Drilled holes and cut-outs
for keypads and operator
panels
available on request.
Note:
The support arm connection and
door hinge may be swapped
over by rotating the enclosure.
Width (B1) mm
Packs of
Height (H1) mm
Depth (T1) mm
Model No. CP
1
Weight (kg)
Property rights:
German patent no. 44 13 543
French patent no. 95 04769
GB patent no. 2 288 971
Ital. patent no. 01273518
Jap. patent no. 2 820 637
US patent no. 5,662,397
German registered design
no. M 94 03 156
U.K. reg. des. no. 2 042 639
Jap. reg. des. no. 955 950
US design patent
no. des. 375,938
Detailed drawing,
see page 1216.
Approvals,
see page 38.
300
380
380
500
600
200
300
380
500
380
155
210
210
210
210
6540.2001)
6531.200
6530.200
6532.200
6533.200
4.9
9.3
10.2
15.4
14.6
–
–
4594.000
4309.000
4594.000
Page
Accessories
Support strips for attaching to the mounting
angles of the side panel
20
964
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
lock cylinder, plastic handles and T-handles, type B, see page 954 – 957.
1) Support
arm connection and door hinge at the bottom.
Support arm bracket 90° CP-L
for the assembly of compact
support arm systems.
Model No. see page 254.
Open pedestal
for the entry of cables with
pre-assembled connectors.
Model No. see page 294.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286 Command Panel housing with door, stainless steel Page 312
234
Rittal Catalogue 32/Industrial Enclosures
Command Panel
based on AE with display panel front
T
H
B
B
Material and surface finish:
Enclosure and door:
Sheet steel, dipcoat-primed
and powder-coated in
textured RAL 7035
Frame and front panel:
Aluminium, natural-anodised.
Protection category:
IP 54 to EN 60 529/09.2000
Supply includes:
Enclosure without support arm
connection with mounting
angles spot-welded at the sides.
With maximum cut-out at the
front and fitted, easily machinable 3 mm front panel with
aluminium frame,
with r/h hinge, screw-fastened
from the inside.
Rear door, r/h hinge,
with two cam locks (for
CP 6442.500 one lock).
Width (B) mm
Packs of
Height (H) mm
Depth (T) mm
Model No. CP
1
Weight (kg)
Command Panel
1.4
Detailed drawing,
see page 1217.
Rittal service:
●
●
●
●
Approvals,
see page 39.
Other sizes
Other RAL colours
With support arm cut-out
Drilled holes and cut-outs
for keypads and operator
panels
available on request.
380
380
500
600
380
600
500
600
249
249
249
249
6442.500
6462.500
6552.500
6662.500
9.5
13.4
18.0
19.6
Page
Accessories
Reinforcement plate with support arm cut-out CP-L
1
6143.210
6143.210
6143.210
–
296
Enclosure reinforcement with support arm cut-out CP-L
1
–
–
–
6503.000
296
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
lock cylinder, plastic handles and T-handles, type B, see page 954 – 957.
To order Command Panels in RAL 7032, please add extension .200 to the Model No. Delivery times available on request.
TFT monitor
for industrial use.
Model No. see page 1133.
Support for keyboards.
Model No. see page 1140.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286 Command Panel housing with door, stainless steel Page 312
Rittal Catalogue 32/Industrial Enclosures
235
Command Panel
based on AE with wide VIP 6000 frame
Width dimensions:
B = enclosure width
B1 = B + 79 mm, overall width
B2 = B – 42 mm, clearance
between the front frames
B3 = B – 5 mm, front panel width
H
H1
H3
H2
B
B
B2
B3
Depth dimensions:
T = enclosure depth
100
70
Supply includes:
Enclosure with integral roof or
base reinforcement and connection for support arm system
CP-L or CP-XL or CP-Q. Aluminium front plate and front
frame supplied loose, door at
rear.
7
Support arm connection
for system CP-XL/CP-Q
Support arm cut-out
for CP-L system, Ø 130 mm
82
Command Panel with wide VIP 6000 frame
in the dimensions of compact enclosures AE
or in individual dimensions
Protection category:
IP 56 to EN 60 529/09.2000,
complies with NEMA 12.
2
Material and surface finish:
Enclosure and door:
Sheet steel, dipcoat-primed and
powder-coated in textured
RAL 7035
Front plate:
3 mm aluminium,
natural-anodised
Frame section:
Aluminium, powder-coated in
RAL 7035
Frame corner pieces:
Die-cast zinc, powder-coated in
RAL 7035
11
The right frame, even for
deeper operator panels.
On request, the compact enclosure AE can be equipped with a
stylish VIP 6000 frame mounted
on the rear panel. The large AE
door provides easy access for
servicing.
7
Command Panel
1.4
T
B1
Height dimensions:
H = enclosure height
H1 = H + 79 mm, overall height
H2 = H – 42 mm, clearance
between the front frames
H3 = H – 5 mm, front panel
height
Basic
Design code number
Model No. CP
6541.009
Support arm connection for support arm system
Without
6541.009
0
CP-XL or CP-Q top
6541.009
1
CP-XL or CP-Q bottom
6541.009
2
CP-L, Ø 130 mm, top
6541.009
3
CP-L, Ø 130 mm, bottom
6541.009
4
Without
6541.009
X
0
Bottom
6541.009
X
1
Individual sizes mm
6541.009
X
X W x H x D:
Like compact enclosure AE (see page 128)
6541.009
X
X Model No. AE:
Cable tube connection
Dimensions
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A,
lock cylinder, plastic handles and T-handles, type B, see page 954 – 957.
Order example
6541.009
Order example
Model No. CP 6541.009
Design code numbers:
● Support arm connection CP-L, Ø 130 mm,
bottom (4)
● Cable tube connection at the bottom (1)
● Individual dimensions:
W x H x D: 537 x 352 x 350 mm
4
1 W x H x D: 537 x 352 x 350 mm (or e.g. AE 1050.600)
Additional mounting of a VIP 6000 keyboard
housing is possible via the design code number
(see page 223).
The front panel width refers to an enclosure
width B – 54 mm and is achieved via a frame
connector, which is included with the supply of
the keyboard housing.
Accessories Page 890 Support arm systems Page 237 Stand systems Page 286 VIP 6000 keyboard housing Page 223
Command Panel with door, stainless steel Page 312
236
Rittal Catalogue 32/Industrial Enclosures
Support arm systems
Features
Different viewing angles of the machine, tall or short operating staff, sitting or standing – with the support arm systems
from Rittal, the interaction between monitoring and operating
is achieved to perfection.
Four different systems are used, depending on the system
B
1.4
Support arm systems
configuration, jib length and enclosure weight.
Load capacity CP-S steel/stainless steel
48.3
48
Permissible static load [N]
(enclosure + vertical
support arm section)
When using CP-S in conjunction with CP-L
(in the horizontal development of the system),
the CP-L load diagram applies.
800
600
400
200
200
400
600
800
1000
1200
1400
1600
Jib length (mm)
Support arm system CP-S, see page 313.
Load capacity CP-L
50
Permissible static load [N]
(enclosure + vertical
support arm section)
85
Permissible load depending on system assembly
Intermediate hinge CP 6523.0X0 should only be used
once per system!
800
700
1
600
2
500
3
400
300
200
100
0
0
1 System assembly without intermediate hinge
200
400
600
800
1000
1200
1400
1600
1800
2000
Jib length (mm)
2 System assembly with one intermediate hinge
3 System assembly with one intermediate hinge and one
top-mounted/wall-mounted joint
Rittal Catalogue 32/Industrial Enclosures
237
Support arm systems
Features
Load capacity CP-XL
155
B
80
80
1600
1300
1 + 2
800
3
650
550
400
0
0
1000
2000
3000
Jib length (mm)
1 Open and solid support section without intermediate hinge
2 Solid support section with one intermediate hinge
3 Open support section with one intermediate hinge
Load capacity CP-Q
Permissible load depending on system assembly
Intermediate hinge CP 6080.140 should only be used
once per system!
80
1 Without intermediate hinge
Permissible static load [N]
(enclosure + vertical
support arm section)
1500
80
Support arm systems
1.4
Permissible static load [N]
(enclosure + vertical
support arm section)
Permissible load depending on system assembly
Intermediate hinge CP 6120.000 should only be used
once per system!
1
1000
900
800
2
500
300
500
2 With one intermediate hinge
1000
1500
2000
2500
3000
max.
Jib length (mm)
CP-S steel and stainless steel
The angle coupling and angle
piece, wall-mounted and topmounted joint of the system from
steel have an integral adjustment facility.
Angle adaptor 90°
The ideal connection of the CP-S
and CP-L systems.
238
In this way, deviations in the
horizontal of up to ±2.5° can be
compensated in a flash.
The enclosures are easily
located on the enclosure
coupling of the stainless steel
system with a pre-assembled
screw.
Due to the differing requirements and slightly deviating
attachment types, the support
arm and enclosure should be
made from the same material
(steel or stainless steel).
Rittal Catalogue 32/Industrial Enclosures
Support arm systems
Features
CP-L aluminium
B
Signal pillars may be mounted
on many connecting elements of
the systems using the mounting
component,
see page 1129.
The height-adjustable support
arm offers even better ergonomics.
Two ducts allow the control
cable and supply voltage to be
separated.
A stable base point for the
system – the custom-produced
pillar,
see page 295.
Removable panel for problemfree cable entry.
Concertina section with zip for
easy access during assembly
and service.
Angle adaptor 90°
The ideal connection of the
CP-XL and CP-L systems.
CP-XL aluminium
With quadruple screw-fastening, the system offers a particularly high level of safety.
CP-Q steel
The support arm system has
adjustment options if 4 clamping screws are used.
Rittal Catalogue 32/Industrial Enclosures
239
1.4
Support arm systems
The alternative for the configuration of compact systems –
the 90° support arm bracket.
Support arm systems
Getting from the enclosure to the matching support arm components
The diagrams show how the connection points of the Rittal enclosures may be continued with support arm systems, either directly or
via adaptors.
There is a choice of four support arm systems, depending on your
design, load and cabling requirements.
Continuation
with support
arm system
Enclosure
CP-L:
1.4
see page 250
L
rotatable components
L
tiltable or
System end
B
CP-S steel
For small and lightweight enclosures.
1.4
S
S
CP-S
steel:
1.2
see page 242
L
L
CP-L
120 x
65 mm
L
L
Support arm systems
CP-S stainless steel
For use where there are special requirements in terms
of corrosion and hygiene.
CP-L
The system for average command panel weights,
stylish lines, and outstanding solution diversity.
CP-XL
The system for extreme loads. Also with open cable duct
for super-easy cable entry.
CP-Q
The square alternative to the CP-L and CP-XL
support arm systems.
Continuation
with support
arm system
Enclosure
CP-S
steel
L
CP-S
steel:
1.1
see page 242
S
L
S
CP-L:
1.6
see page 250
SE
XL
L
CP-XL:
1.1
see page 268
X
E
CP-S
stainless steel:
1.1
see page
313 – 316
S
CP-S
stainless
steel
Q
L
L
CP-L:
1.1
see page 250
XL
CP-XL
CP-Q: 1.2, 1.3
see page 280
XL
XL
L
CP-L: 1.3
see page 250
CP-L:
1.2
see page 250
L
CP-L:
1.3
1.4
see page 250
L
L
L
CP-XL: 1.2
see page 268
XL
CP-L
Ø
130
mm
X
L
L
XL
XL
L
Q
CP-XL:
1.3
1.4
see page 268
L
CP-S: 1.3
see page 242
S
L
XL
CP-L
120 x
65 mm: 1.6
see page 250
Ve
s
75 a
VESA
75
Vesa 75
L
L
S
L
Q
CP-Q:
1.2
1.3
see page 280
L
240
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-S steel
Fast selection
Make a simple sketch showing the basic form of the support arm.
Next, select the corresponding support arm components.
Start with 1 system start by selecting the appopriate enclosure
situation.
T
Support sections
T1 Support section CP-S
Continue with CP-S according to the item numbers.
Amin. = 100 mm
Amax. = 2000 mm
A
B
A mm
Green = CP-L
System continuation/system end:
1.4
RAL 9006
Model No. CP
500
6501.010
1000
6501.030
as per specifications
6501.3401)
Support arm system CP-S steel
System changes are indicated by the colour.
See page 243.
1) Delivery times available on request.
all directions
vertical
horizontal
angled
tiltable or
rotatable components
From position 3 enclosure attachments, a support
section is required between each component
(minimum length approx. 100 mm, for wall/floor
mounting approx. 160 mm).
4.2
T1
T1
5.1
3.1
2.1
1.1
Assembly example:
T1
Support section CP-S
1.1 Mounting cut-out CP-S
Note:
After any given support section, the 90°
angle adaptor CP-L to CP-S may be used
as a transition to the CP-L system.
Load diagram,
see page 237.
2.1 Tilting enclosure attachment,
top mounting
3.1 Enclosure attachment CP-S
4.2 Angle piece 90° CP-S
5.1 Wall/base mounting CP-S
Rittal Catalogue 32/Industrial Enclosures
241
Support arm system CP-S steel
Fast selection
1
System start
3 Enclosure
attachments
Enclosure with mounting
cut-out
3.1 CP-S attachment
CP-S
1.1 Mounting cut-out
CP-S
2.1
3.1
3.2
3.4
see page 240
B
Support arm system CP-S steel
1.4
CP 6501.070 (RAL 7024)
see page 244
S
1.2 Mounting cut-out
CP-L,
120 x 65 mm
see page 240
4 Angle
components
4.1
4.2
5.1
5.2
5.3
5
4.1 Angle adaptor 90°
CP-L to CP-S
CP 6501.090 (RAL 7024)
see page 264
System end
5.1 Wall/base mounting
CP-S
CPL
s. p.
250
CP 6501.110 (RAL 7024)
see page 248
2.1
3.3
S
3.2 Housing coupling,
round CP-S
L
4.2 Angle piece 90°
CP-S
CP 6501.050 (RAL 7024)
1.3 Mounting cut-out
VESA 75
CP 6501.140 (RAL 7024)
see page 245
see page 247
2.1
see page 240
5.1
5.2
5.3
5.2 Wall-mounted hinge
CP-S
CP 6501.150 (RAL 7024)
see page 249
Vesa 75
S
3.3 Housing coupling
CP-S, for support arm
connection
CP-L
120 x 65 mm
5.3 Top-mounted joint
CP-S
CP 6501.130 (RAL 7024)
see page 248
CP 6501.160 (RAL 7024)
see page 245
2
Tilting adaptor
L
2.1 Enclosure attachment,
tilting, top mounting1)
IW 6902.670 (RAL 7024)
see page 243
S
3.1
3.2
3.4
3.4 Angle coupling 90°
CP-S
CP 6501.120 (RAL 7024)
see page 246
5.1
5.2
5.3
CPL
2.4
s. p.
251
L
S
Vesa 75
L
L
S
1) May
also be used rotated through
180°, e. g. from CP-L
120 x 65 mm or CP-S to CP-L
Ø 130 mm.
242
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-S
Steel
Attached to the connection components with
2 clamping screws.
Dimensions:
External diameter: 48.3 mm
Wall thickness: 4.0 mm
A mm
Weight kg
Model No. CP
500
2.1
6501.010
1000
4.2
6501.030
To specifications
A=
4.2
kg/m
6501.3401)
1) Delivery
times available on request.
Material:
Steel conduit, powder-coated
A
B
Colour:
RAL 9006
Note:
Bent support sections available on request.
Enclosure attachment, tilting,
top mounting
For mounting on:
● IW worktop, prepared for enclosure attachment
CP-L, Ø 130 mm, see page 184
● Surfaces
● Enclosure attachment/coupling
CP-L
120 x 65 mm, see page 260/262
● Attachment/housing coupling CP-S (may also
be used as tilting adaptor +100°/–60° for CP-S),
see page 244/245.
To fit enclosures up to 20 kg with support arm
connection:
● CP-S
● CP-L,
120 x 65 mm
● CP-L Ø 130 mm
● VESA Standard 75.
1.4
Amin. = 100 mm
Amax. = 2000 mm
Colour
RAL
Weight
kg
Model No. IW
7024
0.8
6902.670
Material:
Sheet steel, spray-finished
Supply includes:
Assembly parts and plastic concertina section.
Accessories:
IW worktops prepared for enclosure attachment,
see page 184.
With cable tube for protected cable entry.
Tilt angle:
+100°/–60°, adjustable in 7.2° increments via
clamping lever and may be limited to +100°/–15°
using the stop screw supplied loose.
View B
B
75
➞
28
43
View A
15°
6
70
63
65
7
Ø 65
Ø
95
75
2
131
Ø8
➞
90
A
28
40
Rittal Catalogue 32/Industrial Enclosures
243
Support arm system CP-S
Support section CP-S
Support arm system CP-S
Steel
CP-S attachment
For rigid attachment of the
● enclosure to the support section,
● support arm to flat surfaces, rear1).
With two drilling patterns for
a) Rittal Command Panels
b) Complete Control Panels
Colour
RAL
Weight
kg
Model No. CP
7024
1.0
6501.070
1) Maximum
load 400 N
Material:
Die-cast zinc
B
1.4
Support arm system CP-S
Supply includes:
Seal and 2 clamping screws for support section
CP-S.
View A
68
1
Ø 48.3
M6
58
48
71
20
48
Ø 65
12
45°
1 Clamping screw
➞
Ø 40
90
A
Like cut-out a),
but with lock holes
Mounting cut-outs
b)
7
7
7
7
a)
45°
Ø4
5
Ø6
5
5
Ø4
45
Ø4
5° 45°
48
25°
Ø 65
45°
13.5
58
244
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-S
Steel
Enclosure coupling CP-S
for support arm connection CP-S, round
For swivel mounting of the enclosure on the
vertical section of the support arm system.
With two drilling patterns for
a) Rittal Command Panels
b) Complete Control Panels
Colour
RAL
Weight
kg
Model No. CP
7024
1.1
6501.050
Material:
Die-cast zinc
Supply includes:
Seal, 2 clamping screws for support section CP-S
and clamping lever.
Ø 48.3
68
1
M6
38
58
71
20
48
Ø 65
20
43
45°
1 Clamping screw
Ø 40
90
Mounting cut-outs
Like cut-out a),
but with lock holes
b)
7
7
7
7
a)
45°
25°
5
Ø4
Ø4
5
5
Ø6
45
Ø4
5°
48
Ø 65
45°
45°
13.5
58
Enclosure coupling CP-S
for support arm connection
CP-L,
120 x 65 mm
For swivel mounting of the enclosure on the
vertical section of the support arm system.
Colour
RAL
Weight
kg
Model No. CP
7024
1.5
6501.130
Rotation range:
Approx. 305°, lockable via clamping levers.
By inserting additional tension pins 4 x 16 mm
to ISO 8752 the rotation range may be limited
to ±7°, 44°, 104°, 142°.
For mounting on:
● Comfort Panel standard dimensions
CP 6371.000 – .020
CP 6371.120 – .170
CP 6371.220 – .240
(see page 194)
● Optipanel to fit TFT monitors
CP 6380.010 – .040 (see page 205)
● Optipanel W x H x D = 19″ x 7 U x 100 mm
CP 6380.000 (see page 205)
● Optipanel installation depth 50 mm,
with rear support arm connection
(see page 209)
● Compact Panel
CP 6340.X10 (see page 231).
Material:
Die-cast zinc
Supply includes:
Seals, 2 locking screws.
Ø 90
Mounting cut-out, enclosure
Ø 48.3
71
Ø7
96
40
20
(38)
1
1
58
50
2
95
max. 100
Ø 40
1 Locking screw
Rittal Catalogue 32/Industrial Enclosures
120
B
1.4
Support arm system CP-S
Rotation range:
Approx. 305°, lockable via clamping lever.
By inserting additional tension pins 4 x 16 mm to
ISO 8752 the rotation range may be limited to ±7°,
44°, 104°, 142°.
65
2 Alternative max. Ø 55 mm
245
Support arm system CP-S
Steel
Angle coupling 90°CP-S
For swivel fastening of the enclosure to the horizontal support arm system.
● Enclosure top-mounted or suspended
● Adjustment option of the support arm system
(see page 238)
● Removable panel for problem-free cable entry
Rotation range:
Approx. 305°, lockable via clamping levers.
By inserting additional tension pins 4 x 16 mm
to ISO 8752 the rotation range may be limited
to ±7°, 44°, 104°, 142°.
Support arm system CP-S
1.4
1
2
Model No. CP
7024
1.6
6501.120
Material:
Cast aluminium/die-cast zinc
Supply includes:
Seals, 2 locking screws and 2 adjusting screws.
Possible mounting cut-outs of enclosures
28
a)
b)
Ø7
Ø7
Ø 48.3
3
75
Weight
kg
5
Ø4
78
48
B
Colour
RAL
1
45
°
2
58
Ø 45
Ø 65
40
71
c)
133
Ø 65
1 Locking screw
7
Ø 45
2 Adjusting screw
45°
Ø7
25°
3 Removable plate
Ø 90
Ø 13.5
45°
45°
Version c) for quick/one-man assembly
Angle adaptor 90°
CP-L to CP-S
see page 264.
246
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-S
Steel
For connecting horizontal and vertical support
arm components.
● Adjustment option of the support arm system
(see page 238)
● Removable panel for problem-free cable entry
Material:
Cast aluminium
Supply includes:
Seals, 4 locking screws and 2 adjusting screws.
Colour
RAL
Weight
kg
Model No. CP
7024
1.1
6501.140
Accessories:
Mounting component for signal pillars
(SZ 2375.030),
see page 1129.
B
1.4
Support arm system CP-S
Angle piece 90°CP-S
105
(67)
38
2
1
1
2
(70)
105
35
Ø 48.3
3
1 Locking screw
2 Adjusting screw
Ø 75
3 Removable plate
Mounting components
for support arm systems
For mounting a signal pillar,
see page 1129.
Rittal Catalogue 32/Industrial Enclosures
247
Support arm system CP-S
Steel
Wall/base mounting CP-S
For rigid attachment of the support section to
surfaces. With flange for front mounting.
Colour
RAL
Weight
kg
Model No. CP
7024
0.7
6501.110
Material:
Cast aluminium
Supply includes:
Seal, 2 clamping screws for support section CP-S
and 3 pre-fitted adjusting screws.
B
1
M10
1.4
9
Support arm system CP-S
A➞
1
1
73
115
1 Adjusting screw
View A
Mounting cut-out
Ø 48.3
8
Ø 40
56
12
Ø
65
95
Ø
72
Ø
M
9/
Ø 49
Top-mounted joint CP-S
For swivel mounting of the support arm system to
horizontal surfaces.
● Enclosure top-mounted or suspended
● Adjustment option of the support arm system
(see page 238)
● Removable panel for problem-free cable entry
Rotation range:
Approx. 300°. By inserting additional pins 6 x
20 mm to ISO 8752 the rotation range may be
limited to ±6°, 51°, 96°. To lock the joint, the screw
may be exchanged for standard clamping lever
M6 x 25 mm.
4
28
2
Colour
RAL
Weight
kg
Model No. CP
7024
1.8
6501.160
Material:
Cast aluminium
Supply includes:
Seals, 2 locking screws and 2 adjusting screws.
Mounting cut-out
1
Ø9
/M
5
70
Ø
Ø
11
40
86
Ø 48.3
37
8
2
48
1
3
135
1 Locking screw
Ø 90
2 Adjusting screw
3 Screw for adjusting rotatability
4 Removable plate
173
248
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-S
Steel
Wall-mounted hinge CP-S
Colour
RAL
Weight
kg
Model No. CP
7024
2.2
6501.150
Material:
Cast aluminium
Supply includes:
Seals, 2 locking screws and 2 adjusting screws.
1.4
Rotation range:
Approx. 300°. By inserting additional pins 6 x
20 mm to ISO 8752 the rotation range may be
limited to ±6°, 51°, 96°. To lock the joint, the screw
may be exchanged for standard clamping lever
M6 x 25 mm.
Ø 40
2
28
1
Ø 48.3
37
Mounting cut-out 90°
4
50
Ø42
1
3
50
127
Ø9/M8
2
2
Ø4
54
4
90
50
155
1 Locking screw
2 Adjusting screw
3 Screw for adjusting rotatability
4 Removable plate
Rittal Catalogue 32/Industrial Enclosures
B
Support arm system CP-S
For vertically hinged mounting of the support arm
on vertical surfaces.
● Machined keyhole as mirror image for support
arm outlet at the top or bottom for easy oneman assembly.
− Pre-mount the screws on a vertical surface
− Locate the wall-mounted hinge (support arm
system pre-mounted)
− Tighten the screws
● Adjustment option of the support arm system
(see page 238)
● Removable panel for problem-free cable entry
249
Support arm system CP-L
Fast selection
Make a simple sketch showing the basic form of the support arm.
Next, select the corresponding support arm components.
Start with 1 system start by selecting the appopriate enclosure situation.
T
Support sections
1
System start
Enclosure with mounting
cut-out
T1 Support section CP-L
1.1 Mounting cut-out
CP-L, Ø 130 mm
Continue with CP-L according to the item numbers.
L
B
System changes are indicated by the colour.
Support arm system CP-L
1.4
Violet = CP-S
1.2 Connection plate for
support arm CP-L
Blue = CP-XL
CP 6528.2X0, see page 259
2.1
2.2
2.4
3.1
3.2
3.3
L
System continuation/system end:
all directions
Length
mm
vertical
horizontal
angled
tiltable or
Model No.
CP
Colour
RAL
250
7035
6509.000
500
7035
6511.000
1000
7035
6513.000
2000
7035
6515.000
250
9006
6509.010
500
9006
6511.010
1.3 Connection adaptor
CP-L to CP-XL
1000
9006
6513.010
CP 6528.0X0, see page 258
2000
9006
6515.010
L
See page 254
L
rotatable components
From position 3 enclosure attachments, a support
section is required between each component (minimum
length approx. 100 mm, for wall/floor mounting approx.
160 mm).
The cross-sections indicate the installation position(s).
XL
T2 Support arm CP-L,
height-adjustable
1.4 Mounting cut-out
CP-L,
120 x 65 mm
X = 0 (RAL 7030)
max.
800 mm
CPS
3.3
s. p.
242
L
Colour: RAL 7024/9006
Weight
Length
Model No.
range
mm
CP
kg
962
6510.210
19 – 30
958
6510.310
See page 252
T1
4.1
10 – 20
6.1
T3 Support arm bracket 90°,
CP-L
T1
Assembly example:
2.1
1.1
T1
CP 6508.0X0
on Optipanel support plate B
CP 6508.100
see page 261
L
Support section CP-L
CPS
3.3
s. p.
242
A
1.1 Mounting cut-out CP-L, Ø 130 mm
C
2.1 Tilting adaptor, 10° CP-L, Ø 130 mm
3.1 Enclosure attachment CP-L,
2.3
2.4
3.4
3.5
3.6
350
B
1.6 Mounting cut-out
VESA 75
350
3.1
1.5 Connection console
CP-L
120 x 65 mm
A
Other enclosures with mounting cut-out C for connection
console
5.1
T1
2.3
2.4
3.4
3.5
3.6
Ø 130 mm
see page 240
4.1 Angle piece 90° CP-L
2.4
Vesa 75
5.1 Intermediate hinge CP-L
6.1 Wall/base mounting CP-L
Colour RAL
Model No. CP
7035
6519.000
9006
6519.010
See page 254
250
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Fast selection
Tilting adaptor
2.1 Tilting adaptor 10°
CP-L, Ø 130 mm
CP 6527.0X0, see page 255
3 Enclosure
attachments
3.1
3.2
3.3
3.1 Enclosure attachment
CP-L, Ø 130 mm
CP 6525.5X0, see page 256
L
L
5
Intermediate hinge
5.1 Intermediate hinge
CP-L
CP 6523.0X0, see page 265
4.1
4.2
4.3
6.1
6.2
6.3
6.4
4.1
6.1
6.2
B
1.4
L
Support arm system CP-L
2
L
3.2 Housing coupling
CP-L, Ø 130 mm
2.2 Tilting adaptor
+/– 45°
CP-L, Ø 130 mm
CP 6525.0X0, see page 262
CP 6529.0X0, see page 255
L
4.1
4.3
6.1
6.2
6.32)
6.42)
4.1 Angle piece 90°
CP-L
L
3.3 Angle coupling 90°
CP-L, Ø 130 mm
L
CP 6526.0X0, see page 263
CP 6524.0X0, see page 263
4.1
5.1
6.1
6.2
6.3
6.4
L
2.3 Tilting adaptor, 10°
CP-L,
120 x 65 mm
CP 6527.1X0, see page 256
3.4
3.5
3.6
4 Angle
components
3.4 Enclosure attachment
CP-L,
120 x 65 mm
CP 6525.6X0, see page 257
L
4.1
4.2
4.3
6.1
6.2
6.32)
6.42)
L
2.4 Enclosure attachment,
tilting, top mounting1)
CP 6902.670 (RAL 7024),
see page 243
S
L
3.4
3.5
CP 6525.1X0, see page 262
CPS
s. p.
241
242
L
L
CP 6520.5X0, see page 265
CP 6524.2X0, see page 264
CP 6520.0X0, see page 266
4.3 Angle adaptor 90°
CP-L to CP-S
6.3 Top-mounted joint
CP-L
CPXL
s. p.
268
4.1
4.3
6.1
6.2
6.32)
6.42)
CP 6522.0X0, see page 266
6.4 Wall-mounted hinge
CP-L
CP 6521.0X0, see page 267
L
Vesa 75
6.1 Wall/base mounting,
small, CP-L
6.2 Wall/base mounting,
large, CP-L
L
3.5 Housing coupling
CP-L,
120 x 65 mm
5.1
6.1
6.2
6.3
6.4
System end
4.2 Articulated joint 90°
CP-L
CP 6528.100, see page 264
L
6
L
S
3.6 Enclosure attachment
CP-L,
120 x 65 mm,
locatable
CP 6525.2X0, see page 260
1) May
also be used rotated through
180°, e. g. from CP-L
120 x 65 mm
or CP-S to CP-L Ø 130 mm.
2) Via T3 support arm bracket 90° CP-L.
Rittal Catalogue 32/Industrial Enclosures
L
4.1
4.2
4.3
6.1
6.2
Notes:
Re T2
Support arm, height adjustable
should always be inserted as the
first horizontal component after
the enclosure.
Re 5.1 / 6.3 / 6.4
It is always expedient to use
only one intermediate hinge or
one wall mounted hinge.
Two joints will restrict load
capacity and make positioning
the Command Panel more difficult.
Load diagram,
see page 237.
Re 4.1
Two angle pieces may also be
used one after the other.
251
Support arm system CP-L
Support arm, height adjustable
Support arm, height adjustable
CP-L
Offers enhanced ergonomics thanks to:
● Adjustment range
– for tall and short operators
– for seated and standing work
adjustable to up to 800 mm as required via and
adjustment screw at the front of the support
arm.
● Precise coordination of the compression spring
to the enclosure weight via an adjusting screw
at the rear of the support arm.
● Complete functional reliabilty – if the compression spring breaks, the arm will remain in
position.
● Plastic casing clips off for access to the integral U-section cable tray.
● Tilting angle of the mounted enclosure is identical in every height position.
B
Support arm system CP-L
1.4
Overall
length
mm
Colour
RAL
Weight
range
kg1)
Model No.
CP
962
9006
10 – 20
6510.210
958
9006
19 – 30
6510.310
1) For
configured enclosure and vertical support section.
Material:
Plastic-coated steel
Supply includes:
Round tube with compression spring relief and
U-section cable tray, 2 threaded connectors,
plastic casing, including assembly parts.
56
20 kg version
View A
20
85
70
40
M8
30
22
50
400
22
A
30
A
400
800
962
34
Max. cross-section
for cable entry 8 x 15 mm
84
30 kg version
View B
20
85
70
M8
30
40
22
22
400
50
B
800
958
400
30
B
34
Max. cross-section
for cable entry 13 x 20 mm
252
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Support arm, height adjustable
The versatile combination options with horizontal
mounting are illustrated in this diagram.
Attachment side
CP-L
CP-L
Angle piece 90° CP-L
Model No. 6524.0X01),
see page 263.
B
CP-L
1.4
CP-L
Angle piece 90° CP-L
Model No. 6524.0X01),
see page 263.
CP-L
CP-L
CP-L
CP-L
Angle piece 90° CP-L
Model No. 6524.2X01),
see page 264.
Intermediate hinge CP-L
Model No. 6523.0X01),
see page 265.
Enclosure
Enclosure
Angle coupling 90° CP-L
for support arm connection
Ø 130 mm
Model No. 6526.0X01),
see page 263.
Wall/base mounting, small,
CP-L
Model No. 6520.5X01),
see page 265.
Enclosure
Enclosure attachment CP-L
for support arm connection
Ø 130 mm
Model No. 6525.5X01),
enclosure attachment CP-L
for support arm connection
120 x 65 mm
Model No. 6525.6X01),
see page 256/257.
Enclosure with rear support arm
cut-out/reinforcement available on
request.
Wall-mounted hinge CP-L
Model No. 6521.0X01),
see page 267.
CP-S
CP-S
Angle adaptor 90°, CP-L to CP-S
Model No. 6501.090 (RAL 7024),
see page 264.
Rittal Catalogue 32/Industrial Enclosures
Top-mounted joint CP-L
Model No. 6522.0X01),
see page 266.
1) Key:
X = 0 RAL 7030
X = 1 RAL 7024
253
Support arm system CP-L
Enclosure side
Support arm system CP-L
Aluminium
Support section CP-L
Attachment to the connection components with
4 self-tapping screws in a screw channel, may
be cut to any required length, no thread-tapping
required.
Dimensions:
50 x 85 mm
Wall thickness:
8 mm
B
1.4
Length (L)1)
mm
Weight
kg
RAL 7035
Model No.
CP
RAL 9006
Model No.
CP
250
1.3
6509.000
6509.010
500
2.6
6511.000
6511.010
1000
5.1
6513.000
6513.010
2000
10.2
6515.000
6515.010
1) L
min = 135 mm
Support arm system CP-L
Material:
Extruded aluminium section
Note:
Load information,
see page 237.
German patent no. 43 31 124
French patent no. 94 10 806
Ital. patent no. 01275022
Jap. patent no. 2730621
US patent no. 5,460,894
Rittal service:
Support section CP-L, open with two chambers
for cable entry:
– sealed, e. g. for standard cabling,
– open, with plastic cover section for easy
retro-fitting of cables.
Available on request.
L
(35)
Ø 7.45
85
40
8
34
50
Support arm bracket 90° CP-L
The compact, welded alternative; no threadtapping required.
Weight
kg
Model No.
CP
7035
3.4
6519.000
9006
3.4
6519.010
350
Material:
Extruded aluminium section
Colour
RAL
392.5
50
350
7.45
85
40
69
(265)
34
254
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
Tilting adaptor, 10° CP-L
for support arm connection Ø 130 mm
For mounting between:
● Housing coupling CP-L (CP 6525.0X0)
or
● Enclosure attachment CP-L (CP 6525.0X0)
or
● Angle coupling 90° CP-L (CP 6526.0X0)
and the Command Panel.
Colour
RAL
Weight
kg
Model No.
CP
7030
0.6
6527.000
7024
0.6
6527.010
35
B
Material:
Die-cast zinc
1.4
70
Support arm system CP-L
10°
Supply includes:
Seal and assembly parts.
12
130
70
82
Mounting cut-out
Enclosure CP-L, Ø 130 mm
7
Tilting adaptor, ±45° CP-L
for support arm connection Ø 130 mm
For mounting between:
● Housing coupling CP-L (CP 6525.0X0)
or
● Enclosure attachment CP-L (CP 6525.0X0)
or
● Angle coupling 90° CP-L (CP 6526.0X0)
and the Command Panel.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.3
6529.000
7024
1.3
6529.010
Ø 130
Ø 82
Ø 70
M6
Tilting angle:
Adjustable in 7.5° increments
Material:
Cast aluminium
45°
107
Supply includes:
Seal, plastic concertina section and assembly
parts.
German patent no. 195 40 298
US patent no. 5,911,393
70
82
Mounting cut-out
Enclosure CP-L, Ø 130 mm
7
Rittal Catalogue 32/Industrial Enclosures
255
Support arm system CP-L
Aluminium
Weight
kg
Model No.
CP
7030
0.4
6527.100
7024
0.4
6527.110
70
25
M6
6.6
1.4
65
Material:
Die-cast zinc
Supply includes:
Seal and assembly parts.
Support arm system CP-L
Ø
B
Colour
RAL
65
for support arm connection
120 x 65 mm
For mounting between:
● Housing coupling CP-L (CP 6525.1X0)
or
● Enclosure attachment CP-L (CP 6525.6X0)
or
● Housing coupling CP-S (CP 6501.130)
and the Command Panel.
40
Tilting adaptor, 10°CP-L
10°
(14)
95
Ø 120
Mounting cut-out
Enclosure CP-L
120 x 65 mm
20
55
40
7
50
95
100
1
1 Alternative max. Ø 55 mm
Enclosure attachment, tilting
Assembly,
see page 243.
for support arm connection Ø 130 mm
For rigid fastening of the enclosure to the support
arm system.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.0
6525.500
7024
1.0
6525.510
Material:
Die-cast zinc
34
28
40
82
Supply includes:
Seals and self-tapping screws for CP-L support
section attachment.
130
Enclosure attachment CP-L
23
70
82
Mounting cut-out
Enclosure CP-L, Ø 130 mm
7
256
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
Enclosure attachment CP-L
for support arm connection
120 x 65 mm
For rigid fastening of the enclosure to the support
arm system.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.0
6525.600
7024
1.0
6525.610
Material:
Die-cast zinc
Accessories:
Connection console CP-L,
CP-L, see page 261.
B
1.4
Support arm system CP-L
Supply includes:
Seals and self-tapping screws for CP-L support
section attachment.
Mounting cut-out
Enclosure CP-L
120 x 65 mm
70
M6
20
40
55
90
65
40
7
50
95
100
Enclosure attachment, tilting,
base mounting
CP-L
120 x 65 mm
For mounting beneath:
● IW worktop with pedestal
● Sufficiently large surfaces.
Fits enclosures with mounting cut-out:
● CP-L
120 x 65 mm (e. g. Optipanel,
see page 205, Comfort Panel, see page 194).
Tilt angle:
+40°/–40°, lockable via clamping lever
Material:
Sheet steel, spray-finished
Supply includes:
Assembly parts
Colour
RAL
Weight
kg
Model No.
IW
7024
1.6
6902.640
Note:
The enclosure attachment can be mounted either
on the support arm connection of the Optipanel
enclosure or on the underside or rear of any
enclosure.
With mounting cut-out for connector grommet for
sealed cable entry.
View B
1
1 Alternative max. Ø 55 mm
63
41
95
120
Accessories:
Connector gland,
see page 1057.
IW worktop,
see page 184.
Pedestal,
see page 290.
70
1
M6
B
40
40
66
171
A
22.5
211
95
145
42.5
2
A=
max. 62 mm
40
1 Prepared for enclosure with connection
CP-L/CP-S,
120 x 65 mm or connection
console CP-L CP 6508.0X0
2 Preparation for connector grommet
23
35
35
3
101
3 Worktop, e.g. IW 6902.310/IW 6902.320
SZ 2400.300/SZ 2400.500
Rittal Catalogue 32/Industrial Enclosures
257
Support arm system CP-L
Aluminium
Connection adaptor
CP-L on CP-XL or
CP-L on CP-Q
for mounting between:
● Enclosure with support arm connection CP-L
and
● Support arm system CP-XL or CP-Q.
May also be used for the attachment of command
panels with cut-out for CP-L directly to machines
and systems without a support arm. The mounting cut-out CP-XL or CP-Q should be provided
there.
Assembly sequence:
● Mount the connection adaptor on the supporting structure
● Mount the enclosure and tighten the screws
B
Support arm system CP-L
1.4
Height
mm
Colour
RAL
Weight
kg
Model No.
CP
201)
7030
0.6
6528.000
201)
7024
0.6
6528.010
552)
7030
0.7
6528.500
552)
7024
0.7
6528.510
1) If
the load permits, also suitable for mounting between
enclosure with support arm connection CP-XL or CP-Q
and support arm system CP-L Ø 130 mm.
2) For
Command Panel VIP 6000,
see page 213,
3.1. Operating housing, design code number 1 to 5.
The seal to the supporting structure is available
on request, if required.
Material:
Cast aluminium
Supply includes:
Seal and assembly parts.
70
70
M
6
7
7
M6
82
82
112
112
5
Ø 160
45°
20
45°
55
20
5
Ø 160
Ø 130
Ø 130
258
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
With reinforcement plate
● For easy location of the Command Panel onto
the support arm or pedestal.
● Easily screw-fastened from the outside after
drilling 4 holes Ø 7 mm.
● More space for cable entry plus clamping
bracket.
For mounting:
● Comfort Panel1)
● VIP 60002)
● Optipanel3)
● Sheet steel Command Panel4)
on:
Support arm system components
Colour
RAL
Weight
kg
Model No.
CP
CP-L
7030
0.7
6528.200
CP-L
7024
0.7
6528.210
Note:
The square support arm cut-out can be prepared
on request.
Material:
Connection plate: Cast aluminium
Reinforcement plate: Sheet steel 6 mm
CP 6525.5X0
Housing coupling
CP 6525.0X0
Angle coupling
CP 6526.0X0
Tilting adaptor 10°
CP 6527.0X0
Tilting adaptor +/– 45°
CP 6529.0X0
1) From a front panel width 247 mm and
installation depth 152 mm.
2)
From a front panel width of 265 mm.
3)
From a front panel width of 220 mm and
installation depth of 150 mm.
4) Mounting surface, minimum W x D =
300 mm x 135 mm (e.g. Command Panel housing
with door).
1 Pre-install screws, locate the enclosure,
tighten the screws, and it’s done!
CP-L
Mounting cut-out CP-L
180
200
165
145
100.5
B
39.5
A
3
2
79
Ø7
C
146
1
Ø 5.5/10 deep
1 Alternative Ø B
2 Ø 6 mm only with metal enclosures for
securing the reinforcement plate
129
18
34
3 Outer edge of enclosure at the rear
182.5
Optipanel
Metal enclosure
1)
B
C
152/308
28.9
77.9
30.5
191 – 464
43.1
82.5
48.1
155 – 185
32.5
81
30.5
295 – 438
174.5
81
173
150
34
65.5
28
–
1)
86
1)
Make the drilled holes/cut-out in the centre of the
enclosure reinforcement plate.
15.5
79
VIP 6000
A
120
Comfort Panel
Installation
depth
mm
70
82
134
180
Rittal Catalogue 32/Industrial Enclosures
B
1.4
Supply includes:
Seals and assembly parts.
CP-L
Enclosure attachment
1
With support arm
connection
259
Support arm system CP-L
Connection plate CP-L
Support arm system CP-L
Aluminium
Enclosure attachment
locatable CP-L
for support arm connection
120 x 65 mm
For rigid fastening of the enclosure to the support
section.
With “machined keyholes” for easy, secure mounting by just one person:
● Screw the enclosure attachment to the support
arm.
● Secure the supporting plate to the inside of the
enclosure and pre-fit two screws from the outside.
● Locate the enclosure and tighten the screws.
B
Support arm system CP-L
1.4
Colour
RAL
Weight
kg
Model No.
CP
7030
0.4
6525.200
7024
0.4
6525.210
Also required:
Articulated joint 90° CP-L,
see page 264.
95
65
34
40
Material:
Enclosure attachment: Die-cast zinc
Support plate: Sheet steel
18
For enclosures from a depth of 70 mm.
8.5
Supply includes:
Seal, support plate and assembly parts.
69
72
Ø 80
21
18
11
Ø 121
Mounting cut-out
Enclosure
120 x 65 mm
20
55
40
Ø7
50
95
100
1
1 Alternative max. Ø 55 mm
260
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
Connection console CP-L
For rear connection of slimline operating housings. Removable lid for simple cable entry.
Material:
Cast aluminium
Mounting options:
1. Optipanel
Retro-fitting:
● Cut-out in rear panel/door
● With support plate CP 6508.100 (see page 262)
directly screw-fastened to extrusion (see Fig. A)
Selection via design code number (see page 209,
item 2.3, selection 7 or 8):
Connection console and support plate are fitted.
1
Fig. A
Weight
kg
Model No.
CP
7030
0.7
6508.000
7024
0.7
6508.010
Also required:
Enclosure attachment CP 6525.6X0),
see page 257.
Housing coupling (CP 6525.1X0),
see page 262.
Tilting adaptor 10° (CP 6527.1X0),
see page 256.
Housing coupling CP-S (CP 6501.130),
see page 245.
B
1.4
Accessories:
Spacer plate (CP 6508.200), available on request.
Support plate Optipanel CP 6508.100,
see page 262.
View A
75
2
10.5
A
130
95
73.5
89
7
49
40
Mounting cut-out
7
38
63
21.5
10.5
60
6
90
30.5
2. General
e.g.
● Terminal boxes
(see page 116),
● Cast aluminium enclosures
(see page 114)
the connection console may be mounted
a) directly, flush with enclosure edge
(see Fig. B top),
b) in the centre with spacer plate CP 6508.200
(available on request) (see Fig. B bottom), to the
rear panel of the enclosure. Additional reinforcement of the rear panel should be checked in individual cases.
89
Fig. A Optipanel
30.5
38
3
35
6
30
Fig. B General
133
1
Fig. B
1 Support arm component CP-L
120 x 65 mm
2 Connection console CP-L
2
3 Support plate (inside)
4 Spacer plate
1
2
4
Rittal Catalogue 32/Industrial Enclosures
261
Support arm system CP-L
Supply includes:
Seals and assembly parts for mounting on the
enclosure and 2 cable ties.
Colour
RAL
Support arm system CP-L
Aluminium
Optipanel support plate
For mounting on the enclosure section.
The rear panel or door are recessed in this area,
thereby ensuring easy access in case of servicing.
Weight
kg
Model No.
CP
0.2
6508.100
Material:
Cast aluminium
Supply includes:
Seals and assembly parts.
Support arm system CP-L
1.4
Housing coupling CP-L
for support arm connection Ø 130 mm
For swivel mounting of the enclosure on the vertical section of the support arm system.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.7
6525.000
7024
1.7
6525.010
Rotation range:
Approx. 310°, lockable via clamping levers.
By inserting additional tension pins 5 x 18 mm to
ISO 8752 the rotation range may be limited to
±5°, 65°, 95° and 155°.
50
35
Material:
Die-cast zinc
40
B
Ø 130
Supply includes:
Seals and self-tapping screws for CP-L support
section attachment.
70
82
Mounting cut-out
Enclosure CP-L, Ø 130 mm
7
Model No.
CP
7030
1.4
6525.100
7024
1.4
6525.110
Accessories:
Connection console CP-L (CP 6508.0X0),
siehe Seite 261.
Supply includes:
Seals and self-tapping screws for CP-L support
section attachment.
70
M6
Mounting cut-out
Enclosure CP-L
120 x 65 mm
55
Ø 69
90
Material:
Die-cast zinc
Weight
kg
40
Rotation range:
Approx. 350°, lockable via clamping levers.
By inserting additional tension pins 6 x 20 mm to
ISO 8752 the rotation range may be limited to ±5°
and ±100°.
Colour
RAL
40
for support arm connection
120 x 65 mm
For swivel mounting of the enclosure on the vertical section of the support arm system.
Ø 60
Housing coupling CP-L
7
20
55
40
95
1
82
95
100
60
50
120
8.5
1 Alternative max. Ø 55 mm
34
16
34
262
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
Rotation range:
Approx. 310°.
By inserting additional tension pins 5 x 18 mm to
ISO 8752 the rotation range may be limited to
±5°, 65°, 95° and 155°.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.9
6526.000
7024
1.9
6526.010
Accessories:
Mounting component for signal pillars
(SZ 2375.000),
see page 1129.
B
1.4
1
85
Material:
Cast aluminium/die-cast zinc
93
Supply includes:
Seals, adjustment set and self-tapping screws for
CP-L support section attachment.
Support arm system CP-L
for support arm connection Ø 130 mm
For swivel mounting of the enclosure on the horizontal part of the support arm system. Enclosure
may be suspended or top-mounted.
The removable plate enables problem-free cable
entry.
157
Angle coupling 90° CP-L
50
50
75
130
1 Removable plate
70
82
Mounting cut-out
Enclosure CP-L, Ø 130 mm
7
Angle piece 90° CP-L
For connecting horizontal and vertical support
arm components. The removable plate ensures
easier cable entry.
Colour
RAL
Weight
kg
Model No.
CP
7030
1.4
6524.000
7024
1.4
6524.010
Material:
Die-cast zinc
German patent no. 43 31 125
French patent no. 94 10901
Italian patent no. 012 74 738
Japanese patent no. 2 809 993
US patent no. 5,533,763
Accessories:
Mounting component for signal pillars
(SZ 2375.000),
see page 1129.
1
85
Supply includes:
Seals, adjustment set and self-tapping screws for
CP-L support section attachment.
45°
47.5
62.5
126
1 Removable plate
75 x 174 mm
Rittal Catalogue 32/Industrial Enclosures
263
Support arm system CP-L
Aluminium
Articulated joint 90° CP-L
The swivel connection between horizontal and
vertical support sections.
With very slimline enclosures, there is no need for
the deep housing coupling. With the shallow
enclosure attachment (CP 6525.2X0), the support
section may also be attached with its wide side.
Rotation range:
Approx. 325°.
Option of limiting the rotation range via the use
of additional tension pins 5 x 18 mm to ISO 8752
to ±54° and ±98°.
B
Support arm system CP-L
1.4
Material:
Cast aluminium/die-cast zinc
Colour
RAL
Weight
kg
Model No.
CP
7030
1.2
6524.200
7024
1.2
6524.210
Also required:
Enclosure attachment, suspended CP-L for
support arm connection
120 x 65 mm
(CP 6525.2X0),
see page 260,
or enclosure attachment CP-L for support arm
connection
120 x 65 mm (CP 6525.6X0),
see page 257.
Supply includes:
Seals, self-tapping screws for support section
attachment and adjustment set.
5
Note:
May only be top-mounted/suspended on the
enclosure side.
34
22
76
151
85
40
1
50
1 Removable plate
Ø
90
50
43
48
Angle adaptor 90°
Connection component between:
● small and larger support arm systems.
Outlet optionally at the top or bottom if this configuration is chosen for static or visual reasons.
The removable cover ensures easier cable entry.
Model No.
CP
Colour
RAL
Weight
kg
CP-L to CP-S
7024
1.0
6501.090
CP-XL to CP-L
7024
1.7
6528.1101)
CP-XL to CP-L
7030
1.7
6528.100
1) Extended
delivery times.
Material:
Cast aluminium
Supply includes:
Seal for support section attachment.
CP 6501.090
CP 6528.100
96
2
56
191
156
49
35
49
56
78
55.5
47.5
69
106
1
Ø 40
75
57
1 Removable plate
110
71 x 149 mm
2 Removable cover
264
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
For vertically hinged connection of horizontal
support sections within the support arm system.
The removable plates ensure simple cable entry.
Rotation range:
Approx. 315°.
Option of restricting the rotation range in 60°
increments with the screws supplied loose.
Material:
Cast aluminium
Colour
RAL
Weight
kg
Model No.
CP
7030
3.2
6523.000
7024
3.2
6523.010
Accessories:
Mounting component for signal pillars
(SZ 2375.020),
see page 1129.
Supply includes:
Seals, adjustment set and self-tapping screws
for CP-L support section attachment.
B
1.4
Support arm system CP-L
Intermediate hinge CP-L
126
German patent no. 44 03 593
French patent no. 94 10902
Italian patent no. 01274751
Japanese patent no. 2 675 264
US patent no. 5,522,118
1
146.5
285
85
2
Ø115
2
116
1 Screw for adjusting rotatability
2 Removable plate
Model No.
CP
7030
0.6
6520.500
7024
0.6
6520.510
11
Supply includes:
Seals, adjustment set for support section and selftapping screws for CP-L support section attachment.
85
8.5
130
18
34
69
Material:
Cast aluminium
Weight
kg
25
For rigid attachment of the support arm system to
vertical or horizontal surfaces.
Particularly suitable for the configuration of compact support arm systems with cable infeed from
the inside.
Colour
RAL
39
Wall/base mounting bracket,
small, CP-L
11
0
51
Mounting cut-out
Ø1
10
B
90°
1
A
Ø 11/M10
1 Alternative Ø 52 mm
A = max. 52 mm
B = max. 70 mm
Rittal Catalogue 32/Industrial Enclosures
265
Support arm system CP-L
Aluminium
Wall/base mounting,
large CP-L
For rigid attachment of the support arm system to
vertical or horizontal surfaces with cable infeed
from the inside.
Material:
Cast aluminium
B
Weight
kg
Model No.
CP
7030
1.9
6520.000
7024
1.9
6520.010
Accessories:
Supply includes:
Seals, opportunity for adjustment with grub
screws and self-tapping screws supplied loose for
CP-L support section attachment.
Support arm system CP-L
1.4
Colour
RAL
Pillar,
see page 295.
Mounting cut-out
1
75
205
85
150
70 – 110
75
Ø 11/ M 10
35 – 65
22.5
60
115
115
24
2
1
1 Removable plate
2 Adjusting screws
Top-mounted joint CP-L
For swivel mounting of the support arm system on
horizontal surfaces – also suitable for suspending
from the ceiling. The removable plate enables
simplified cable entry.
Rotation range:
Approx. 315°.
Option of restricting the rotation range in 60°
increments and adjusting the mobility of the joint
with the screws supplied loose. To lock the joint,
the screw may be exchanged for standard clamping lever M8 x 16.
Material:
Cast aluminium
Colour
RAL
Weight
kg
Model No.
CP
7030
3.0
6522.000
7024
3.0
6522.010
Accessories:
Pillar,
see page 295.
Mounting component for signal pillars
(SZ 2375.020),
see page 1129.
Supply includes:
Seals, adjustment set and self-tapping screws for
CP-L support section attachment.
Note:
Not suitable for the suspension of enclosures.
Mounting cut-out
58
2
85
180
12
111
Ø 170
3
Ø 150
Ø 50 – 90
Ø 11/M10
1
Ø 46
Ø 11
Ø 170
1 Screw for adjusting rotatability
2 Removable plate
3 Mounting surface
266
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-L
Aluminium
Wall-mounted hinge CP-L
For vertically hinged mounting of the support arm
surface on vertical surfaces. The removable
plates facilitate problem-free cable routing or
cable entry.
Weight
kg
Model No.
CP
7030
3.2
6521.000
7024
3.2
6521.010
Accessories:
Mounting
cut-out
126
Supply includes:
Seals, adjustment via grub screws, adjusting
screws and self-tapping screws for CP-L support
section attachment.
1.4
2
60
1
81
146
288
139
85
Ø 46 – 55
Ø 11/ M 10
2
121
1 Screw for adjusting rotatability
2 Removable plate
Mounting components
for support arm systems
For external mounting of a signal pillar,
see page 1129.
Rittal Catalogue 32/Industrial Enclosures
267
Support arm system CP-L
Material:
Cast aluminium
German patent no. 44 03 593
French patent no. 94 10902
Italian patent no. 01274751
Japanese patent no. 2 675 264
US patent no. 5,522,118
B
Pillar, see page 295.
Mounting component for signal pillars
(SZ 2375.020),
see page 1129.
60
Rotation range:
Approx. 315°.
Option of restricting the rotation range in 60°
increments and adjusting the mobility of the joint
with the screws supplied loose. To lock the joint,
the screw may be exchanged for standard clamping lever M8 x 16.
Colour
RAL
Support arm system CP-XL
Fast selection
Make a simple sketch showing the basic form of the support arm.
Next, select the corresponding support arm components.
Start with 1 system start by selecting the appopriate enclosure
situation.
T
Support sections
1
System start
Enclosure with mounting
cut-out
T1 Support section CP-XL,
open
1.1 Mounting cut-out
CP-XL
Continue with CP-XL according to the item numbers.
B
XL
1.4
Support arm system CP-XL
System continuation/system end:
all directions
vertical
Length
mm
Colour
RAL
Model No.
CP
500
7035
6050.000
1000
7035
6100.000
2000
7035
6200.000
2.1
3.1
3.2
3.3
3.4
3.5
1.2 Connection adaptor
CP-L to CP-XL
CP 6528.0X0 see page 258
XL
See page 270
horizontal
T2 Support arm CP-XL,
solid
angled
L
1.3 Connection adaptor
CP-L to CP-XL
for VIP 6000 enclosures
with installation depths
155, 185 and 295 mm
rotatable components
From position 3 enclosure attachments, a support
section is required between each component
(minimum length approx. 100 mm, for wall/floor mounting approx. 160 mm).
The cross-sections indicate the installation position(s).
Length
mm
Colour
RAL
Model No.
CP
6050.500
500
7035
1000
7035
6100.500
2000
7035
6200.500
CP 6528.5X0 see page 258
XL
See page 270
X = 0 (RAL 7030)
X = 1 (RAL 7024)
L
1.4 Connection plate
with reinforcement plate
CP 6528.420 (width 200 mm)
CP 6528.430 (width 418 mm)
see page 274
Q
2.1
3.1
3.2
3.3
3.4
XL
4.1
T1
5.1
T1
6.1
T1
3.1
2.1
1.1
Assembly example:
T1
Support section CP-XL, open
1.1 Mounting cut-out CP-XL
2.1 Tilting adaptor 10° CP-XL
3.1 Enclosure attachment CP-XL, round
4.1 Angle piece 90° CP-XL,
Note:
● Only insert one intermediate hinge
● Two angle pieces may also be used
one after the other
● With angle pieces, take care to ensure
correct positioning of the support
section cable duct
● Load diagram,
see page 237.
outlet at bottom
5.1 Intermediate hinge CP-XL
6.1 Wall/base mounting CP-XL
268
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Fast selection
Tilting adaptor
2.1 Tilting adaptor 10°
CP-XL
CP 6023.0X0 see page 271
3 Enclosure
attachments
3.1
3.3
3.4
3.1 Enclosure attachment
CP-XL, round
CP 6130.6X0 see page 271
XL
XL
4 Angle
components
4.1
4.2
5.1
6.1
6.2
6.3
4.1 Angle piece 90° CP-XL,
outlet at bottom
CP 6140.0X0 see page 276
6
5.1
6.1
6.2
6.3
System end
6.1 Wall/base mounting
CP-XL
CP 6160.0X0 see page 279
B
1.4
Support arm system CP-XL
2
XL
3.2 Enclosure attachment
CP-XL, rectangular
4.2 Angle piece 90° CP-XL,
outlet at top
6.2 Top-mounted joint
CP-XL
CP 6130.5X0 see page 272
CP 6180.0X0 see page 276
CP 6170.0X0 see page 278
XL
3.3 Housing coupling
CP-XL
6.3 Wall-mounted hinge
CP-XL
CP 6130.0X0 see page 272
CP 6110.0X0 see page 277
XL
Intermediate
hinge
3.4 Angle coupling 90°
CP-XL
5.1 Intermediate hinge
CP-XL
CP 6040.0X0 see page 275
CP 6120.0X0 see page 277
5
4.1
4.2
6.2
6.3
XL
3.5 Housing coupling
for desktop mounting
CP 6528.400 (width 200 mm)
CP 6528.410 (width 418 mm)
see page 273
Rittal Catalogue 32/Industrial Enclosures
269
Support arm system CP-XL
Aluminium
Support section CP-XL, open
Attachment to the connection components with
4 self-tapping screws in a screw channel, may be
cut to any required length.
With open cable duct, for easy servicing access
and for pre-assembled cables with connectors;
easily locked via clip-in lid.
Dimensions:
80 x 155 mm
B
1.4
Material:
Extruded aluminium section
Colour
RAL
Weight
kg
Model No.
CP
500
7035
4.9
6050.000
1000
7035
9.8
6100.000
2000
7035
19.6
6200.000
Note:
Load information, see page 238.
Accessories:
Adjustment set for support section, see page 270.
80
15
Support arm system CP-XL
Supply includes:
Clip-in lid
Length
mm
18.5
45
7.45
5.7
50
155
3
10.6
54
64
80
Support section CP-XL, solid
The alternative solution for higher loads and
torsion compared with the CP-L support section,
open.
Dimensions:
80 x 155 mm
Material:
Extruded aluminium section
Length
mm
Colour
RAL
Weight
kg
Model No.
CP
500
7035
5.5
6050.500
1000
7035
11.0
6100.500
2000
7035
22.0
6200.500
Note:
Load information, see page 238.
Accessories:
Adjustment set for support section, see page 270.
18.5
52
45
7.45
5.7
50
155
3
76
10.5
54
64
80
Adjustment set for support
section CP-XL
Packs of
Model No. CP
10
6205.000
The adjustment set also supports retrospective
alignment of the CP support section.
Material:
Sheet steel 1.0 mm, zinc-plated, passivated.
270
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Aluminium
Connection adaptor
CP-L to CP-XL
see page 258.
B
Model No.
CP
Colour
RAL
Weight
kg
7030
1.4
6023.000
7024
1.4
6023.0101)
1) Extended
delivery times.
10°
For mounting between:
● Housing coupling (CP 6130.0X0)
or
● Enclosure attachment (CP 6130.6X0)
or
● Angle coupling (CP 6040.0X0)
and the command panel.
50
Tilting adaptor 10° CP-XL
Support arm system CP-XL
1.4
Material:
Die-cast zinc
Ø 160
Supply includes:
Seals and assembly parts.
98
180
Mounting cut-out
enclosure CP-XL
100
7
2
11
Enclosure attachment CP-XL,
round
For rigid external mounting of enclosures to:
● Support section
● Tilting adaptor 10° (CP 6023.0X0)
Material:
Die-cast zinc
Colour
RAL
Weight
kg
Model No.
CP
7030
1.6
6130.600
7024
1.6
6130.610
180
112
22
64
32 18
Supply includes:
Seals and self-tapping screws for CP-XL support
section attachment.
54
25
100
Rittal Catalogue 32/Industrial Enclosures
271
Support arm system CP-XL
Aluminium
Enclosure attachment CP-XL,
rectangular
For rigid external mounting on the enclosure.
Material:
Die-cast zinc
Model No.
CP
Colour
RAL
Weight
kg
7030
1.2
6130.500
7024
1.2
6130.5101)
1) Extended
delivery times.
Supply includes:
Seal and self-tapping screws for CP-XL support
section attachment.
B
1.4
Support arm system CP-XL
25
64
Mounting cut-out enclosure CP-XL
32
160
Ø 112
100
18
7
2
11
22
54
130
Housing coupling CP-XL
For swivel mounting of the enclosure on the
vertical section of the support arm system.
Rotation range:
Approx. 350°
Colour
RAL
Weight
kg
Model No.
CP
7030
6.8
6130.000
7024
6.8
6130.010
11
2
6
Ø 100
Note:
By inserting pins 5 x 12 to DIN EN ISO 8741, the
rotation range may be limited in 90° increments.
M
Supply includes:
Seals and self-tapping screws for CP-XL support
section attachment.
58
Material:
Die-cast zinc
45°
45°
Ø 180
Mounting cut-out
enclosure CP-XL
100
7
2
11
Adaptor with connector cut-out
24-pole
Packs of
Model No. SZ
1
2477.010
For partitioning between the command panel and
support arm or stand system.
To fit:
● Housing coupling for desktop mounting
CP 6528.400 (W = 200 mm)
CP 6528.410 (W = 418 mm)
● Connection plates CP-XL with reinforcement
plate
CP 6528.420 (W = 200 mm)
CP 6528.430 (W = 418 mm)
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Seal and assembly parts.
272
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Aluminium
Housing couplings CP-XL
for desktop mounting
The stable, rotating connection with extra space
for cable routing.
Design width = 418 mm for additional stability of
the roof and base with heavy installed equipment.
Material:
Housing coupling: Cast aluminium/die-cast zinc
Reinforcement plate: Sheet steel, 6 mm
Surface finish:
Housing coupling:
Powder-coated in textured RAL 7024
Reinforcement plate:
Sheet steel, zinc-plated, passivated
Supply includes:
Reinforcement plate, seals and assembly parts.
Mounting cut-out for surfaces
CP 6528.400/.410
CP 6528.400
Optipanel
W=
200 mm
2221)
2441)
2471)
3.4
6528.400
W=
418 mm
4101)
4321)
4351)
4.2
6528.410
1) From
front panel width mm without keyboard housing;
with keyboard housing on request.
B
Attachment
● Of the Command Panel:
one-man assembly via machined keyholes
● On surfaces:
via external screws with cover
Rotation range:
Max. 350°, lockable via clamping levers.
By using additional M6 cheese-head screws, the
rotation range may be limited to ±28°, ±73°,
±118°, ±163°.
VIP
6000
Comfort Panel
VIP 6000
A
B
C
152/308
28.9
77.9
30.5
191 – 464
43.1
82.5
48.1
155 – 185
32.5
81
30.5
295 – 438
174.5
81
173
150
34
65.5
28
–
1)
86
1)
Optipanel
Metal enclosure
1)
1.4
Installation
depth
mm
Make the drilled holes/cut-out in the centre of the
enclosure reinforcement plate.
Accessories:
Adaptor with connector cut-out, 24-pole
(SZ 2477.010), see page 272.
Note:
With the Comfort Panel, Optipanel and VIP 6000
enclosures, the rectangular support arm cut-out
may be ordered and prepared using the design
code:
Comfort Panel, see page 197.
Optipanel, see page 209.
VIP 6000, see page 220.
CP 6528.410
.5
Ø6
.5
Ø6
180
A
79
120
79
120
79
130
A
160
Ø7
Ø 130
180
180
Mounting cut-out, enclosure side
CP 6528.400
165
40
40
180
91
91
35
35
418
153
Ø7
1
Ø 15.5
153
153
95
M4
32
110
95
79
32
84
130
180
114
M4
CP 6528.410
79
B
Ø7
C
ØA
84
1
Ø 15.5
A
Ø
7
79
Ø
6
165
M6
153
ØA
B
6
C
A
Ø
7
79
Ø
390
100
100
130
130
180
180
200
200
390
A or Ø A is manufactured to order in the case of
Optipanel, VIP 6000 and Comfort Panel.
Amax. = 100 mm
Rittal Catalogue 32/Industrial Enclosures
1 Space/preparation for assembly of adaptors with
connector cut-out, 24-pole SZ 2477.010
273
Support arm system CP-XL
For mounting
● Command Panels from an installation depth of
150 mm
on
● IW worktops
● Horizontal surfaces (floors or ceilings)
Comfort Weight Model No.
Panel
kg
CP
Design
Support arm system CP-XL
Aluminium
Connection plates CP-XL
Command Panels from an installation depth of 150 mm:
With reinforcement plate
For easy location of the Command Panel onto the
support arm system or pedestal via machined
keyholes.
Design
W=
200 mm
2221)
2441)
2501)
2.4
6528.420
418 mm
4101)
4321)
4601)
3.2
6528.430
Comfort Panel
Surface finish:
Connection plate:
Powder-coated in textured RAL 7024
Reinforcement plate:
Sheet steel, zinc-plated, passivated
Support arm system CP-XL
Comfort
Panel
front panel width mm without keyboard housing;
with keyboard housing on request.
Material:
Connection plate: Cast aluminium
Reinforcement plate: Sheet steel, 6 mm
1.4
Optipanel
1) From
Design width = 418 mm for additional stability of
the roof and base with heavy installed equipment,
with extra space for cable routing.
B
Weight Model No.
kg
CP
VIP
6000
VIP 6000
Installation
depth mm
A
B
C
152/308
28.9
77.9
30.5
191 – 464
43.1
82.5
48.1
155 – 185
32.5
81
30.5
295 – 438
174.5
81
173
150
34
65.5
28
–
1)
86
1)
Optipanel
Metal enclosure
1)
Supply includes:
Seals and assembly parts.
Make the drilled holes/cut-out in the centre of the
enclosure reinforcement plate.
Accessories:
Adaptor with connector cut-out, 24-pole
(SZ 2477.010), see page 272.
Note:
With the Comfort Panel, Optipanel and VIP 6000
enclosures, the rectangular support arm cut-out
may be ordered and prepared using the design
code:
Comfort Panel, see page 200.
Optipanel, see page 209.
VIP 6000, see page 220.
For mounting Command Panels on:
CP-L Ø 130 mm1)
CP-XL
Enclosure attachment
CP 6525.510
CP 6130.610
–
Housing coupling
CP 6525.010
CP 6130.010
CP 6080.120
Angle coupling
CP 6526.010
–
CP 6080.110
Tilting adaptor 10°
CP 6527.010
–
–
Tilting adaptor ±45°
CP 6529.010
–
–
Support arm system
1) Via
Mounting cut-out
CP 6528.420
CP-Q
connection adaptor CP-L to CP-XL CP 6528.010
CP 6528.420
CP 6528.430
418
180
200
390
165
153
153
153
32
95
35
84
110
95
26
1
M4
32
ØA
84
114
B
M4
C
A
Ø
7
79
Ø
6
M6
130
130
CP 6528.430
51
51
35
1
180
165
153
B
Ø7
7
7
A or Ø A is manufactured to order in the case of
Optipanel, VIP 6000 and Comfort Panel.
Amax. = 100 mm
274
79
130
79
Ø
Ø
390
Ø 15.5
Ø7
130
ØA
Ø 15.5
C
6
A
Ø
7
79
Ø
100
100
112
112
160
160
180
180
1 Space/preparation for assembly of adaptors with
connector cut-out, 24-pole SZ 2477.010
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Aluminium
Angle coupling 90° CP-XL
For swivel mounting of the enclosure on the horizontal part of the support arm system. Enclosure
may be suspended or top-mounted.
Weight
kg
7030
6.2
6040.000
7024
6.2
6040.0101)
1) Extended
Rotation range:
Approx. 350°
Model No.
CP
Colour
RAL
Material:
Spheroidal-graphite cast iron and die-cast zinc
delivery times.
50
89
B
Supply includes:
Seals, plastic casing and self-tapping screws for
CP-XL support section attachment.
Support arm system CP-XL
1.4
Note:
By inserting pins 5 x 12 to DIN EN ISO 8741, the
rotation range may be limited in 90° increments.
88
German patent no. 4033747
Italian patent no. 1252120
11
2
Ø 100
M6
45°
45°
Ø 180
Mounting cut-out
enclosure CP-XL
100
7
2
11
Top-mounting is only possible as shown in the diagrams below (without intermediate hinge).
1
Rittal Catalogue 32/Industrial Enclosures
2
3
1
2
3
1 Angle coupling CP 6040.0X0
1 Angle coupling CP 6040.0X0
2 Support section CP-XL
2 Support section CP-XL
3 Wall/base mounting bracket 6160.0X0
3 Top-mounted joint CP 6170.0X0
275
Support arm system CP-XL
Aluminium
Angle adaptor 90°
CP-XL to CP-L
see page 264.
B
Angle piece 90° CP-XL
Outlet
For connecting horizontal and vertical support
arm components.
Colour
RAL
Weight
kg
Bottom
7030
2.4
6140.000
Bottom
7024
2.4
6140.0101)
Top
7030
3.6
6180.000
Top
7024
3.6
6180.0101)
Material:
Spheroidal-graphite cast iron
Supply includes:
Seals, plastic casing and self-tapping screws for
CP-XL support section attachment.
1) Extended
Model No.
CP
delivery times.
86
German patent no. 58901106
European patent no. 0330027
with validity for IT
20
10
188
45°
88
Support arm system CP-XL
1.4
50
80
10
10
155
20
10
50
80
45°
86
88
188
276
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Aluminium
Rotation range:
Approx. 180°
Weight
kg
7030
6.5
6120.000
7024
6.5
6120.0101)
1) Extended
Material:
Spheroidal-graphite cast iron
Supply includes:
Self-tapping screws for CP-XL support section
attachment and divided concertina section with
zip for uninhibited access to the cable duct.
Model No.
CP
Colour
RAL
delivery times.
Accessories:
B
Rotation range limiter CP-XL,
see page 278.
1.4
275
Note:
Rotation range may be reduced with rotation
range limiter CP-XL, CP 6110.100.
Support arm system CP-XL
For vertically hinged connection of horizontal support sections within the support arm system.
20
Intermediate hinge CP-XL
208
German patent no. 3805424
European patent no. 0330029
with validity for IT
50
130
50
80
120
Wall-mounted hinge CP-XL
For vertically hinged mounting of the support arm
surface on vertical surfaces.
Rotation range:
Approx. 180°
Weight
kg
7030
8.5
6110.000
7024
8.5
6110.0101)
1) Extended
Material:
Spheroidal-graphite cast iron
Supply includes:
Seals, concertina section and assembly parts.
Note:
Rotation range may be reduced with rotation
range limiter CP-XL, CP 6110.100.
Model No.
CP
Colour
RAL
delivery times.
Accessories:
Pillar, see page 295.
Rotation range limiter CP-XL,
see page 278.
70
65
14
140
22.5
167
80
70
45°
165
Mounting cut-out
55
220
20
140
103
208
80
75
70
140
10
14 / M12
28
168
Rittal Catalogue 32/Industrial Enclosures
50
277
Support arm system CP-XL
Aluminium
Rotation range limiter CP-XL
Packs of
Weight
kg
Model No.
CP
1 set
0.6
6110.100
Suitable for:
● Wall-mounted hinge (CP 6110.0X0)
● Intermediate hinge (CP 6120.0X0).
Material:
Steel, zinc-plated, passivated
Adjustable swivel area:
45°
1.4
Support arm system CP-XL
°
90
45°
45°
90°
135
Top-mounted joint CP-XL
For swivel mounting of the support arm system on
horizontal surfaces – also suitable for suspending
from the ceiling.
Rotation range:
Approx. 350°, lockable.
Rotation range may additionally be reduced and
adjusted in 60° increments via the limit plate.
Material:
Steel and cast parts
Colour
RAL
90
°
B
45°
Supply includes:
2 steel disks, slotted, including 3 cheese-head
screws for assembly.
°
135
°
Model No.
CP
Weight
kg
7030
11.9
6170.000
7024
11.9
6170.0101)
1) Extended
delivery times.
Accessories:
Pillar, see page 295.
Supply includes:
Seals and plastic casing, self-tapping screws for
CP-XL support section attachment and limit plate.
60.5
31.5
155
33
79
Note:
Safety end stop as anti-twist protection.
50
Ø 70
Mounting cut-out
(M
12
)
Ø 145
14
200
17
45
80
175
Ø
14
5
45
Ø
Ø 70 + 30
278
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-XL
Aluminium
Wall/base mounting
CP-XL
For rigid attachment of the support arm system
to vertical or horizontal surfaces.
Material:
Spheroidal-graphite cast iron
Supply includes:
Seals and self-tapping screws for CP-XL support
section attachment.
Model No.
CP
Colour
RAL
Weight
kg
7030
4.1
6160.000
7024
4.1
6160.0101)
1) Extended
delivery times.
Accessories:
B
Pillar, see page 295.
1.4
Support arm system CP-XL
70
37
50
14
140
33
55
18
40
80
40
30
174
65
45°
165
14 / M12
Rittal Catalogue 32/Industrial Enclosures
140
80
75
55
Mounting cut-out
70
140
279
Support arm system CP-Q
Fast selection
Make a simple sketch showing the basic form of the support arm.
Next, select the corresponding support arm components.
Start with 1 system start by selecting the appopriate enclosure
situation.
T
Support sections
1
System start
Enclosure with mounting
cut-out
T1 Support section CP-Q,
1.1 Mounting cut-out
CP-Q/CP-XL
2.1
2.2
Continue with CP-Q according to the item numbers.
B
Q
1.4
Support arm system CP-Q
System continuation/system end:
Length
mm
all directions
Weight
kg
XL
Model No.
CP
1.2 Connection adaptor
CP-L to CP-Q
CP 6528.010 (RAL 7024)
500
5.5
6080.050
1000
11.0
6080.100
2000
22.0
6080.200
see page 258
See page 282
vertical
Q
XL
horizontal
angled
L
1.3 Connection adaptor
CP-L to CP-Q
rotatable components
CP 6528.510 (RAL 7024)
From item 2.1 enclosure attachments, a support section
is required between each component.
Minimum length between:
Items 2.1 and 3.1 = 200 mm
Items 3.1 and 4.1/5.1 = 260 mm
Items 4.1 and 5.1 = 310 mm
see page 258
Q
XL
L
3.1
T1
4.1
T1
5.2
T1
2.1
1.1
Assembly example:
T1
Support section CP-Q
1.1 Mounting cut-out CP-Q/CP-XL
2.1 Housing coupling CP-Q
Note:
● Only insert one intermediate hinge
● Two angle pieces may also be used one
after the other
● Load diagram,
see page 238.
3.1 Angle piece 90° CP-Q
4.1 Intermediate hinge CP-Q
5.2 Wall/base mounting CP-Q
280
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-Q
Fast selection
2 Enclosure
attachments
2.1 Housing coupling
CP-Q
CP 6080.120 (RAL 7024),
see page 282
3 Angle
components
3.1
5.2
3.1 Angle piece 90°
CP-Q
CP 6080.130 (RAL 7024),
see page 283
4 Intermediate
hinge
4.1
5.1
5.2
5.3
4.1 Intermediate hinge
CP-Q
CP 6080.140 (RAL 7024),
see page 284
5
5.2
5.3
System end
5.1 Wall-mounted hinge
CP-Q
CP 6080.150 (RAL 7024),
see page 284
B
Q
XL
2.2 Angle coupling 90°
CP-Q
CP 6080.110 (RAL 7024),
see page 283
Q
Support arm system CP-Q
1.4
3.1
4.1
5.1
5.2
5.3
5.2 Wall/base mounting
CP-Q
CP 6080.170 (RAL 7024),
see page 285
XL
5.3 Top-mounted joint CP-Q
CP 6080.160 (RAL 7024),
see page 285
Rittal Catalogue 32/Industrial Enclosures
281
Support arm system CP-Q
Steel, 80 x 80 mm
Support section CP-Q
L mm1)
Weight kg
Model No. CP
500
5.5
6080.050
1000
11.0
6080.100
2000
22.0
6080.200
Attached to the connection components via
clamping screws.
Dimensions:
80 x 80 mm
1) L
Wall thickness:
5.0 mm
B
Note:
Load information,
see page 238.
Material:
Extruded steel tubular section
1.4
min. = 200 mm
Support arm system CP-Q
Surface finish:
Zinc-plated
80
80
L
5
Connection adaptor
CP-L to CP-Q
see page 258.
Housing coupling CP-Q
for support arm connection CP-XL
For swivel mounting of the enclosure on the
vertical section of the support arm system.
Rotation range:
Approx. 350°, lockable via clamping lever.
Fit additional M6 x 10 screws as per
DIN EN ISO 4762 to restrict the rotation range
to 20° increments.
Colour
RAL
Weight
kg
Model No. CP
7024
4.7
6080.120
Note:
For enclosures with support arm connection CP-L
Ø 130 mm, a CP-L to CP-Q connection adaptor
(CP 6528.010 or CP 6528.510) is also required.
Material:
Cast aluminium
Supply includes:
Assembly parts and seals.
Possible mounting cut-outs
Mounting cut-out 1
Compatible with Rittal CP-XL
Mounting cut-out 2
104
84
7
104
80
Ø
11
2
80
45°
142.5
80
Ø
Ø7
160
282
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-Q
Steel, 80 x 80 mm
Angle coupling 90° CP-Q
For swivel fastening of the enclosure to the
horizontal support arm system.
● Enclosure top-mounted or suspended
● The support arm system is adjustable via
clamping screws
● Removable panel for problem-free cable entry
Colour
RAL
Weight
kg
Model No. CP
7024
6.2
6080.110
Note:
For enclosures with support arm connection CP-L
Ø 130 mm, a CP-L to CP-Q connection adaptor
(CP 6528.010 or CP 6528.510) is also required.
Rotation range:
Approx. 350°, lockable via clamping levers.
Fit additional M6 x 10 screws as per
DIN EN ISO 4762 to restrict the rotation range to
20° increments.
Support arm system CP-Q
1.4
Material:
Cast aluminium
Supply includes:
Assembly parts and seals.
Possible mounting cut-outs
Mounting cut-out 1
Compatible with Rittal CP-XL
1
105
84
80
2
80
11
Ø7
Ø
67.5
52.5
7
45°
126.5
Ø
185.5
Mounting cut-out 2
104
162.5
Ø 160
1 Removable plate
Angle piece 90° CP-Q
For connecting horizontal and vertical support
arm components.
● The support arm system is adjustable via
4 clamping screws
● Removable panel for problem-free cable entry
Colour
RAL
Weight
kg
Model No. CP
7024
8.2
6080.130
Material:
Steel
Supply includes:
Assembly parts and seals.
1
218
164
105
164
218
108
105
90
1 Removable plate
Rittal Catalogue 32/Industrial Enclosures
B
283
Support arm system CP-Q
Steel, 80 x 80 mm
Intermediate hinge CP-Q
For vertically hinged connection of horizontal
support sections within the support arm system.
● Concertina section with zip for easy mounting
and access during service.
Rotation range:
Approx. 180°
B
Colour
RAL
Weight
kg
Model No. CP
9005
14.6
6080.140
Accessories:
Rotational range available on request.
Material:
Zinc-coated steel, plastic
1.4
372
186
186
125
125
114
58
11
Support arm system CP-Q
Supply includes:
Assembly parts and concertina section.
Wall-mounted hinge CP-Q
For vertically hinged mounting of the support arm
on vertical surfaces.
● Concertina section with zip for easy mounting
and access during service.
Rotation range:
Approx. 180°
Colour
RAL
Weight
kg
Model No. CP
9005/7024
11.7
6080.150
Accessories:
Rotational range available on request.
Material:
Plastic coated steel
Supply includes:
Assembly parts and concertina section.
Mounting cut-out
297
170
111
125
139
80
78
108
/M
14
81
Ø
186
12
58
114
6.9
16
284
Rittal Catalogue 32/Industrial Enclosures
Support arm system CP-Q
Steel, 80 x 80 mm
Wall/base mounting CP-Q
For rigid attachment of the support section to
vertical and horizontal surfaces. With flange for
front mounting.
Colour
RAL
Weight
kg
Model No. CP
7024
5.9
6080.170
Material:
Steel, spray-finished
Supply includes:
Assembly parts.
B
Support arm system CP-Q
1.4
174
Ø 13/M12
147
135
Mounting cut-out
Ø 174
70
70
Ø 200
15
Ø 70 – 100/
70
Top-mounted joint CP-Q
For swivel mounting of the support arm system to
horizontal surfaces.
● Suspended or top-mounted
● Adjustment facility for the support arm system
● Removable panel for problem-free cable entry
Rotation range:
Approx. 350°, lockable via clamping levers.
Fit additional M8 x 8 or M8 x 10 screws as per
DIN EN ISO 4762 to restrict the rotation range to
20° increments.
Colour
RAL
Weight
kg
Model No. CP
7024
11.3
6080.160
Accessories:
Pillar,
see page 295.
Material:
Steel, spray-finished
Supply includes:
Assembly parts.
185
125
184
69
129
1
Ø 200
Ø
Ø
17
4
145
Ø 174
/
13
Ø 100
2
M1
103
1 Removable plate
Mounting cut-out
Ø 15
Rittal Catalogue 32/Industrial Enclosures
285
Stand systems
Features
Bringing movement to Rittal stand systems, to meet all your
ergonomic and technical requirements.
For every enclosure type, height variability, mobile use, and
accommodation of cables. Our extensive solution diversity
meets every conceivable requirement.
B
Stand systems
1.4
Powerful pillars with numerous options – fixed . . .
Pedestal for Command Panel
with support section CP-L
Pillar, small
For compact assemblies
Pedestal, open
With cable duct open
Pedestal for IW worktops
Pillar, large
The robust base point for heavy
assemblies.
Pedestal for operating housing
Suitable for side mounting of
operating housings.
. . . and with variable height
Lifting pillar, electric
Height adjustment (from 670 to
1140 mm), spindle drive
secured against unintentional
dropping.
Support section, heightadjustable
Adjustment range from 732 to
1122 mm. Inner section for
external mounting of operating
housings.
Pedestal, modular, small
for the configuration of compact
operating stations. Height of
support section may be shortened by sawing to the required
length.
Pedestals in every variant – fixed or mobile
Pedestal base plate, large
Fitted with: Cut-out for concealed mounting of cable conduit adaptors and PG segments.
286
Cross member with cast feet
Steel cross member with mounting holes for lifting pillar.
Pedestal, mobile CP-L/CP-XL
for changing locations.
Rittal Catalogue 32/Industrial Enclosures
Stand systems
Pedestal, height-adjustable
2
13
13
2
2
May be compiled from the
following modules:
Model No.
Page
CP
1
670 – 1140
1 Lifting pillar, electric
3
4
6142.000
Control unit for external mounting
on surfaces/enclosures
4 Cross member with cast feet
Mounting surface,
head plate
see
below
6142.100
291
Mounting surface,
base plate
132
2
6142.020
B
1.4
124
3
88
88
1
Ø1
1
Lifting pillar, electric
Height adjustment 470 mm (from 670 to
1140 mm), spindle drive secured against
unintentional dropping.
With electronic overload cut-out to protect the
drive.
Adjuster unit made from extruded aluminium
sections with all-round groove.
2 Head plate
● For direct mounting of worktop attachment IW,
enclosures with support arm connection
− CP-L, Ø 130 mm
− CP-XL
● For swivel mounting of enclosures, including
those with keyboard support, via wall/base
mounting bracket, small CP-L, CP 6520.5X0, in
conjunction with support arm system CP-L.
3 Base plate
For external mounting on the cross member or
a sub-structure provided by the customer.
Note:
Only suitable for upright assembly.
162
M6
R56
R4
1
Stand systems
45°
138
88
132
45°
Weight kg
Packs of
Model No. CP
13.8
1
6142.000
Technical specifications:
Permissible load: Max. 80 kg
Duty cycle: Max. 6 min/h with continuous
operation
Ambient temperature: +5°C to +40°C
Mains connection: 230 V/50 Hz
Transformer: 24 V DC
Protection category:
IP 65 to EN 60 529/09.2000
(for electrical components).
Supply includes:
Adjusting drive with transformer, head and base
plate.
Also required:
Control unit,
see page 287.
Accessories:
Cross member with cast feet CP 6142.100,
see page 291.
Worktop attachment CP 6902.780,
see page 1124.
Wall/base mounting, small CP-L,
CP 6520.5X0, see page 265.
Control unit
for height adjustment of the lifting pillar. Design
ready for connection with spiral cable and
connector. With mounting brackets for screw
fastening.
Design
Protection
rating
Model No. CP
External mounting on
surfaces/enclosures
IP 30
6142.020
Comfort Panel Page 192 Optipanel Page 204 VIP 6000 Page 213 Compact Panel Page 231 Support arm system CP-L Page 250
Rittal Catalogue 32/Industrial Enclosures
287
Stand systems
Pedestal, modular, CP-S
A
B
2
732 - 1122
B
Stand systems
1.4
For small panels and keyboard housings up to 20 kg
May be compiled from the
Model No. CP Page
following modules:
C
4
1
3
34
0
40
0
1 Support section,
height-adjustable
6146.200
288
2 Tilt adjustment
6146.300
289
3 Pedestal base plate
6146.100
289
4 CP-S attachment
or
CP-S housing coupling
6501.070
244
6501.050
245
External mounting of operating housings or
other devices:
A Direct screw-fastening
B With tilt adjuster 2
10
C With attachment 6501.070 or housing coupling
6501.050 CP-S,
see page 244/245.
Support section
height-adjustable
Adjustment range from 732 to 1122 mm.
Inner section for external mounting of operating
housings.
External section with:
● Clamping screws at the rear for external
mounting on pedestal base plate CP 6146.100
● Clamping lever for height fixing
● Surface for external cable routing.
Material:
Extruded aluminium section, natural-anodised
Supply includes:
Inner and outer section including locking lever
and assembly parts for external mounting on the
base plate and enclosure.
Weight
kg
Packs of
Model No. CP
3.0
1
6146.200
Accessories:
Tilt adjustment CP 6146.300,
see page 289.
Pedestal base plate CP 6146.100,
see page 289.
Attachment CP-S CP 6501.070,
see page 244.
Housing coupling CP-S CP 6501.050,
see page 245.
Rittal service:
Ø7
Ø
5.
6
37
Ø
37
Other heights available on request.
Gas-pressurised spring
●
●
●
●
●
For relief with height adjustment
Optional installation
Internal mounting
Load capacity 15 kg
Length 490/885 mm
Packs of
Model No. CP
1
6146.400
Supply includes:
Assembly parts for installing in the support
section, height-adjustable.
Optipanel Page 204 Compact Panel Page 231
288
Rittal Catalogue 32/Industrial Enclosures
Stand systems
Pedestal, modular, CP-S
Tilt adjustment
For direct top-mounting on enclosures with
mounting cut-out:
● CP-S
● CP-L,
120 x 65 mm
● CP-L, Ø 130 mm
Cannot be combined with enclosure attachment
or coupling.
Packs of
Model No. CP
1
6146.300
Rittal service:
As tilt adjustment for support arm system CP-S
on request.
Adjustment range:
±30°
B
70
1.4
40
Supply includes:
Locking lever and assembly parts for heightadjustable mounting on the support section.
Stand systems
Material:
Sheet steel, zinc-plated, passivated
2
Ø 37
95
110
Ø8
Ø6
5
Pedestal base plate
With large surface for stability and welded tube
connectors (Ø 48.3 mm) to accommodate the
external profile of the support section, heightadjustable. Base mount from the outside using
screws up to M10.
Material:
Sheet steel, powder-coated
Colour
RAL
Packs of
Model No. CP
7024
1
6146.100
Accessories:
Twin castors CP 6148.000,
see page 907.
Optipanel Page 204 Compact Panel Page 231
Rittal Catalogue 32/Industrial Enclosures
289
Stand systems
B
946
1093
Pedestals
1.4
1 + 2
Stand systems
70
0
70
0
0
60
0
60
3
Detailed drawing,
see page 1217.
Pedestal
One oval panel is permanently screw-fastened,
whilst the other can be opened by “spreading”
with a screwdriver for easy laying of cables.
In order to ensure opening of the front panels, we
recommend that the adjustable frame connector
be used with all panels with keyboard housing.
Material:
Feet: Cast aluminium
Cross member, vertical support tubes: Steel
Panels: Aluminium section
Supply includes:
for Command Panel:
2 cast aluminium feet,
1 cross member made of steel,
2 steel support tubes welded to cross member,
2 oval panels made from aluminium section,
1 top cover made from cast aluminium with
support section CP-L,
partially pre-assembled.
for IW worktops:
2 cast aluminium feet,
1 cross member made of steel,
2 steel support tubes welded to cross member,
2 oval panels made from aluminium section,
1 worktop attachment of sheet steel.
1
For Command Panel
Design
W x H x D mm1)
For IW worktops
1
with drilled hole
for cable entry
in cross member
2
with cable conduit
adaptor and drilled
hole for cable entry
in cross member
3
with drilled hole
for cable entry
in cross member
Page
600 x 1093 x 700
600 x 1093 x 700
600 x 946 x 700
Model No.
6141.000
6141.100
6141.200
Weight kg
34.9
35.1
33.7
7035/
natural-anodised
7035/
natural-anodised
7035/
natural-anodised
Twin castors
6148.000, 4634.500
6148.000, 4634.500
6148.000, 4634.500
907
Levelling feet
4612.000
4612.000
4612.000
906
Colour RAL
Accessories
2
Base mount
6147.000
6147.000
6147.000
291
Foot rest
6145.100
6145.100
6145.100
291
Trim panel
6144.100
6144.100
6144.100
Cable conduit
3
see page
Enclosure attachment CP-L, Ø 130 mm
6525.5X0
Enclosure attachment
CP-L,
120 x 65 mm
Housing coupling CP-L, Ø 130 mm
291
1065
6525.5X0
–
256
6525.6X0
6525.6X0
–
257
6525.0X0
6525.0X0
–
262
Housing coupling
CP-L,
120 x 65 mm
6525.1X0
6525.1X0
–
262
Enclosure attachment
CP-L,
120 x 65 mm, locatable
6525.2X0
6525.2X0
–
260
Enclosure attachment, tilting
–
–
6902.640
257
Worktop without handle
(W x H x D 950 x 38 x 600 mm)
–
–
6902.310
184
Worktop with handle
(W x H x D 950 x 38 x 658 mm)
–
–
6902.320
184
1) Other
widths and heights and support tubes available on request.
X = 0 (RAL 7030), X = 1 (RAL 7024)
Comfort Panel Page 192 Optipanel Page 204 VIP 6000 Page 213 IW worktops Page 184
290
Rittal Catalogue 32/Industrial Enclosures
Stand systems
Pedestals
Cross-member
with cast feet
Steel cross member with mounting holes for
lifting pillar or other individual assemblies,
including 2 cast aluminium feet.
Colour
RAL
Weight
kg
Model No. CP
7035
5.8
6142.100
Accessories:
Foot rest CP 6145.100,
trim panel CP 6144.100,
base mount CP 6147.000,
see page 291.
Twin castors,
see page 907.
B
Stand systems
1.4
Detailed drawing,
see page 1219.
Base mount
Brackets for screw-fastening from below to the
cast feet with posidrive raised countersunk
screws M12.
Optionally with projection at the front, interior or
sides, with Ø 11 mm hole for screw-fastening to
the base.
Packs of
Model No. CP
4
6147.000
Colour
RAL
Model No. CP
7035 textured
6144.100
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Posidrive raised countersunk screws M12.
Trim panel
Material:
Cast aluminium
Supply includes:
Assembly parts for screw-fastening between the
cast feet at the front or rear.
Foot rest
Material:
Connector pieces: Cast aluminium
Round tube section: Aluminium
Colour
RAL
Weight
kg
Model No. CP
7035 textured/
natural-anodised
0.6
6145.100
Supply includes:
Assembly parts.
Comfort Panel Page 192 Optipanel Page 204 VIP 6000 Page 213 IW worktops Page 184
Rittal Catalogue 32/Industrial Enclosures
291
Stand systems
Pedestals
H
1
2
Pedestal
modular, CP-L
May be compiled from the
following modules:
Model No.
CP
Page
1 Enclosure reinforcement
6143.210
296
500 mm
6511.0X0
254
1000 mm (H + 65 mm)
6513.0X0
254
2000 mm
6515.0X0
254
6143.200
292
2 Support section, straight
(may be shortened to
required length by sawing)
B
3
1.4
40
0
40
Stand systems
0
Pedestal base plate
small
● With one hole at the rear for commercially
available cable conduit gland M20.
● With two holes at the top (including sealing
bung) for floor attachment.
● Prepared on the inside for a cable clamp for
strain relief.
Weight
kg
Colour
RAL
Model No.
CP
6.3
7035
6143.200
Accessories:
Cable clamp DK 7077.000 or DK 7078.000,
see page 1064.
Pedestal base plate
large
● Cut-out for concealed mounting of cable
conduit adaptor M50
● Cut-out for PG segments (EL 2235.010 to
EL 2235.080) or cable conduit adaptor up to
Ø 70 mm
● Integral cable clamping bracket
Material:
Sheet steel, powder-coated
Supply includes:
Integral reinforcement and mounting cut-out for
support section CP-L or CP-XL, complete with
assembly parts for configuration of the support
section.
135
250
Note:
Commercially available screws up to M8 may be
used for floor attachment.
10
108
Supply includes:
Assembly parts.
15
°
Material:
Sheet steel, 2.5 mm
3 Pedestal base plate, small
400
400
For
support section
Colour
RAL
Weight
kg
Model No.
CP
CP-L
7035
12.4
6137.535
CP-XL
7035
13.1
6137.035
Also required:
Support section
CP-L, see page 254,
CP-XL, see page 270.
Accessories:
CP enclosure or worktops according to choice.
Twin castors,
see page 907.
Levelling feet PS 4612.000,
see page 906.
Cable conduit, see page 1065.
Wall mounting bracket KL 1580.000 or
KL 1590.000 for base attachment,
see page 975.
Detailed drawing,
see page 1219.
Command Panel housing with door Page 233 Operating housings Page 234 Terminal boxes KL Page 116
292
Rittal Catalogue 32/Industrial Enclosures
Stand systems
Pedestals
mobile
Consisting of:
2 sheet steel axles, each with
2 die-cast zinc roller bearings with plastic coating,
4 twin castors, 2 x with, 2 x without locks,
1 cross-brace, screw-fastened, of sheet steel with
integral cable clamping bracket,
1 support section of aluminium (for CP 6136.000
with clip-in lid),
partially pre-assembled.
Colour:
Powder-coated in RAL 7035,
corner pieces in RAL 7030.
Pedestal, mobile
with support section
Model No. CP
CP-L
(see page 254)
6136.500
CP-XL
(see page 270)
6136.000
B
Accessories:
Model No. CP
Page
6136.500
CP-L
6525.5X0
6525.6X0
256/257
6136.000
CP-XL
6130.5X0
6130.6X0
271/272
Enclosure attachment for
Detailed drawing,
see page 1218.
Pedestal
for operating housing
For side mounting.
Consisting of:
● Pedestal plate, on castors
● Support section
● End cap with recessed handle
Colour
RAL
Weight
kg
Model No. CP
9011
23.6
6135.000
Mounting cut-out
89
Supply includes:
Assembly parts.
Dimensions:
W x H x D:
360 x 500 x 995 mm
7
100
Note:
Up to a maximum enclosure width of 380 mm.
Command Panel housing with door Page 233 Operating housings Page 234 Comfort Panel Page 192 Optipanel Page 204 VIP 6000 Page 213
Rittal Catalogue 32/Industrial Enclosures
293
1.4
Stand systems
Pedestal
Stand systems
Pedestals/pillars
Pedestal, open
With cable duct open
● for inserting cables with pre-assembled
connectors
● for optimum service access.
Head plate with accommodation for:
● CP-L housing coupling for support arm
connection Ø 130 mm, CP 6525.0X0,
see page 262
● CP-L enclosure attachment for support arm
connection Ø 130 mm, CP 6525.5X0,
see page 256
B
Stand systems
1.4
Material:
Pedestal tube: Steel, spray-finished in RAL 7035
Cover section: Plastic RAL 7030
Height (H)
mm
Weight
kg
1093
24
6215.000
To specifications
–
6215.1001)
1) Delivery
Model No. CP
times available on request.
Accessories:
Cable tie SZ 2597.000,
see page 1066.
Detailed drawing,
see page 1218.
Supply includes:
Assembly parts and cover section.
H
Design:
400 x 400 mm, 10 mm thick base plate,
with 4 x Ø 11 mm mounting holes.
Pedestal tube W x H = 86 x 73 mm, 3 mm thick,
head and base plates welded on.
1 Cover section just clips on
2 With cable clamping bracket
40
0
0
40
1
2
Pillar
small
For heavy assemblies, connection plates at the
top for support arm components CP-XL.
● With cut-out for 24-pole connectors for cable
entry at the bottom rear,
● Height: 1150 mm.
Material:
Steel
Design:
Base plate cross-section 500 x 500 mm,
12 mm thick, with 4 mounting holes.
Pedestal tube (cross-section 160 x 80 mm,
wall thickness 3.2 mm) welded to base plate.
Colour
RAL
Model No. CP
7035
6214.500
Accessories:
Housing coupling CP-XL,
see page 272.
Enclosure attachment CP-XL,
see page 271, 272.
Detailed drawing,
see page 1218.
Command Panel housing with door Page 233 Operating housings Page 234 Comfort Panel Page 192 Optipanel Page 204 VIP 6000 Page 213
294
Rittal Catalogue 32/Industrial Enclosures
Stand systems
Pillars
Detailed drawing,
see page 1219.
6501.110
6522.0X0
6170.0X0
6501.160
B
6520.0X0
6160.0X0
6501.150
6521.0X0
6110.0X0
Pillar
The stable base point for the support arm
system. The attachment of additional enclosures,
e. g. for security systems, is also possible.
There is a choice of 2 cross-sections:
● 140 x 140 mm
● 200 x 200 mm
Design:
Base plate 15 mm thick, with four mounting holes,
cut-out in the base plate according to the crosssection for cable entry from below. Pedestal tube
(wall thickness 5 mm) welded to the base plate,
with connection facilities for support arm systems
as per the selection table.
1.4
Stand systems
6501.110
Material:
Steel, spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts for support arm system according
to selection.
Note:
Customer-specific designs, such as:
● Other RAL colours
● Drilling patterns for CP-Q
● Heights
● Consoles for additional enclosures
available on request.
Delivery times:
Extended delivery times
Accessories:
Support arm system
CP-S, see page 241,
CP-L, see page 250,
CP-XL, see page 268,
Gland plates size 2, see from page 1048.
Supply includes
Model No. CP
Page
Cross-section 140 x 140 mm, height 2000 mm
6214.
X
X
0
Cross-section 200 x 200 mm, height 2000 mm
6220.
X
X
0
Cut-out for cable entry
Without cut-out in pillar
0
Cut-out at the front
1
Cut-out at the rear
2
Cut-out on the left
3
Cut-out on the right
4
Support arm connection
for
wall/base mounting
front
top
wall-mounted hinge
top-mounted joint
front
top
without
CP-S
6501.110
CP-S
6501.110
CP-S
6501.150
CP-S
CP-L
6501.160
6520.0X0
CP-L
6521.0X0
CP-L
CP-XL1)
6522.0X0
6160.0X0
CP-XL1)
1) For
6110.0X0
6170.0X0
0
–
6
248
7
248
8
249
9
248
2
266
3
267
4
266
1
279/277
5
278
CP 6220.XX0 only.
Support arm system CP-S Page 241 Support arm system CP-L Page 250 Support arm system CP-XL Page 268 Support arm system CP-Q Page 280
Rittal Catalogue 32/Industrial Enclosures
295
Stand systems
Enclosure reinforcements
Enclosure reinforcement
For external or internal reinforcement of enclosures of a corresponding size.
Smaller enclosures may also be mounted directly
without enclosure reinforcement.
Supply includes:
Assembly parts for the enclosure and support
section plus 2 seals.
For enclosure
Support arm
connection
Material
Weight
kg
Model No.
CP
B1 ≥ 300 mm,
T1 ≥ 150 mm
CP-S
Stainless steel
1.4301
0.9
6143.310
B1 ≥ 300 mm,
T1 ≥ 150 mm
CP-L
Sheet steel
0.9
6143.210
CP 6662.000
or
AE (B1 = 600 mm,
T1 ≥ 210 mm)
CP-XL
Sheet steel
2.2
6503.000
9
9
40
7
145
260
CP 6143.210
82
Ø 40
Ø6
Ø9
9
110
Ø 62
CP 6143.210
Ø 49
CP 6143.310
69
CP 6143.310
145
34
260
295
295
B = Width
T = Depth
CP 6503.000
10
12.5
150
175
2
45
7
100
CP-XL
112
Stand systems
1.4
110
B
45
CP 6503.000
525
590
Support arm system CP-S Page 241 Support arm system CP-L Page 250 Support arm system CP-XL Page 268 Support arm system CP-Q Page 280
296
Rittal Catalogue 32/Industrial Enclosures
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement