Part #CIPC43

Part #CIPC-3
Thank You
For Your Business!
1
Tools and Equipment
68
Trailer, Towing and Accessories
93
Lighting
107
Electrical
116
Hard Parts
140
Safety
169
Paint
176
Chemicals and Lubricants
203
Janitorial and Sanitation
Contents by Vendor
2000 Flushes ............... 178
Energizer - Lighting ........ 93
Lufkin ............................. 47
Sea Foam ..................... 199
3-IN-ONE ..................... 178
31 Inc ............................. 79
Erickson ......................... 69
Firestone ........................ 77
Masterlock ................... 140
Mechanix Wear ............ 137
Shop-Vac.......................... 4
SKF .............................. 120
3M Canada .................. 149
FPPF ............................ 185
Megapro ........................ 35
Slick 50 ........................ 197
AGS ............................. 175
Alliance Mercantile ...... 147,
Furgale ......................... 207
Garant ............................ 14
Meguiar’s ..................... 184
Milton ............................. 58
Slime ............................ 196
SprayNine .................... 194
Gates ........................... 130
Mityvac............................. 9
Sprayon ................ 198, 202
AMS Automotive/
Rhino PAC...................... 37
Ancra ............................. 71
211
Gearwrench ................... 43
Gilmour .......................... 55
Gojo ............................. 205
Molyslip ........................ 187
Mothers ........................ 188
Mr. Heater ...................... 21
Spot Shot ..................... 178
Stant ............................. 130
Stens ............................ 124
Armor All ...................... 179
Armstrong ...................... 46
Associated ..................... 41
Great Canadian Sox ..... 151
Great Plains ................... 26
Grote .............................. 95
Muck Boots .................. 146
Nicholson ....................... 50
NLS .............................. 189
Stewart Warner ............. 102
STP .............................. 180
SWS ............................... 94
Bernzomatic ................... 39
Black Magic ................. 197
Brady ........................... 141
Groupe BBH ................ 152
Gumout ........................ 197
H.K. Porter ..................... 51
Nuera ............................. 75
Nuvue ............................ 70
OLFA.............................. 59
Sylvania.......................... 92
Tanaka............................ 13
Terra Footwear ............. 159
Buyers ............................ 64
Cantech ......................... 74
Car-Freshner ................ 206
Hein-Werner ................... 18
Hella............................... 97
Hitachi ............................ 23
Omega ........................... 15
Permatex ...................... 193
Phillips & Temro .............116
The Bone ....................... 40
Torin Jacks ..................... 10
Trico ............................. 125
Champion .....................119
Channellock ................... 27
Cliplight .......................... 91
Honeywell .................... 153
Hopkins.......................... 69
Ingersoll Rand ................ 54
Phillips Industries ......... 106
Pico ...............................107
Plombco......................... 79
Tridon .......................... 130
Truper ............................ 61
Ultra Lube/Lubrimatic ... 130
Cold Fire ...................... 176
Cole Hersee ..................112
Coleman ........................ 53
CRC ............................. 173
Crescent......................... 49
Donaldson ....................117
Dupli-Color & VHT ........ 172
DV Systems ...................... 5
Dynaline ......................... 80
E.F. Walter .................... 150
Eiko ................................ 90
Emhart Teknologies ...... 123
Energizer - Electrical .... 105
Irwin ............................... 31
J-B Weld....................... 186
Jiffco ............................ 171
Ken-Tool ........................ 57
Kodiak .......................... 159
Krylon .......................... 167
Kutmaster ......................... 3
Leatherman .................... 28
Lincoln ............................. 7
Lite Ladders ................... 29
Loctite .......................... 181
Luber-Finer................... 136
Lucas Oil ...................... 191
Plumb ............................ 52
Port-A-Cool ..................... 60
Porto-Power.................... 20
Powerbright ................... 111
Prime Wire ................... 104
Probuilt......................... 103
Purdy ........................... 166
Rain-X .......................... 195
Raw Power ................... 131
Red Ram ...................... 160
Richlu ........................... 161
Rubbermaid ................. 203
Scepter .......................... 63
United Abrasives ...........113
US Forge........................ 27
Veyance ....................... 127
Victor Technologies .......... 1
W. Ralston .................... 201
Warn ...............................11
WD-40 .......................... 177
Weller ............................. 51
Weatherhead ................ 121
Wipeco ......................... 200
Wiss ............................... 48
Xcelite ............................ 52
VICTOR TECHNOLOGIES Code: 395
Website: www.victortechnologies.com
TOOLS AND EQUIPMENT
VICTOR CUTSKILL CUTTING
AND WELDING OUTFITS
• Includes hose, goggles and striker
VICTOR GAS APPARATUS
PART NO. DESCRIPTION
VICTOR FIREPOWER CUTTING
AND WELDING OUTFITS
• Includes hose, goggles and striker
PART NO. DESCRIPTION
0384-2551
FP250-510FC
Medium Duty Outfit
0384-2652
FP350-510FC
Heavy Duty Outfit
0384-2530
D250-510
Medium Duty Outfit
0384-2646
D350-510
Heavy Duty Outfit
VICTOR GAS APPARATUS
JOURNEYMAN HEAVY DUTY OUTFIT
• H 315FC Torch Handle, CA 2460
Cutting Attachment, 540/510 ESS4
EDGE Regulators
VICTOR GAS APPARATUS
PERFORMER MEDIUM DUTY OUTFIT
• 100FC Torch Handle, CA 1350
Cutting Attachment, 540/510 ESS3
EDGE Regulators
THERMAL ARC AUTO DARKENING
CANADA WELDING HELMET
PART NO. DESCRIPTION
W4012000
Black Helmet
THERMAL DYNAMICS PLASMA
CUTTING SYSTEMS
W4011900
Claret Helmet
W4011800
Canada Helmet
NEW! CUTMASTER 42 PLASMA MACHINE
• 40 amp system 115 volt to 230 volt input power
• Cuts all day at 1/4” with the power to cut 5/8”
• Vent2Shield Technology allows the use of
considerably smaller air compressors
• Compact and light weight, only 26 pounds
• Industry leading four year warranty
THERMAL ARC PORTABLE INVERTER DC WELDERS
THERMAL ARC MIG WELDERS
NEW! THERMAL ARC FABRICATOR 181I MULTI PROCESS WELDER
• Three process capability MIG (GMAW/FCAW), STICK (SMAW) and TIG (GTAW)
• Only weighs 32 pounds!
• Includes Fabricator 181i, Tweco 180 amp MIG Gun, Victor Argon
• Regulator & 10 ft Hose, Tweco Electrode Holder & Ground Clamp, Drive Rolls &
Contact Tips, Sample Electrodes, Shoulder Strap, Operators Manual & Set-Up DVD
• Three Year Warranty
PART NO. DESCRIPTION
VIC
CTOR TECHN
NOLOGIES
1
VICTOR GAS APPARATUS
W1003181
Fabricator 181i Package
W4014700
Cart for 181i
W4013802
Optional TIG Torch
10271390
Optional Spool Gun
THERMAL ARC 161 STL STICK/TIG WELDING SYSTEM
Designed to provide increased control and superior arc performance for tackling more
demanding DC Stick and Lift TIG welding applications. It is capable of delivering up to
125 amps on 115 volt circuits for stick welding and 160 amps for TIG. When used on
208 - 230 volt circuits, maximum output is 160 amps for either welding process.
• 161 STL power supply, Victor Argon Regulator & 10 ft hose
• Tweco Electrode Holder & Ground Clamp
• TIG Torch with integrated controls
• Sample Electrodes, Carry Case,
Operators Manual & DVD
PART NO. DESCRIPTION
W1003805
161 STL Package
10-4015
Optional Foot Control 15 ft
THERMAL ARC 95S DC WELDERS
PART NO. DESCRIPTION
• High 95 amp welding output
• Highly efficient inverter design
W1003209
95S Stick Package
• Simple and easy
W1003210
95S Stick/TIG Package
• Ultra-light for maximum portability (10 lb)
• Versatile, multi-process stick/TIG capability
• Excellent, smooth and stable arc performance
• Ready to weld package includes 95S Inverter power supply,
Tweco Electrode Holder & Ground Clamp, 20 amp, Adaptor
Plug and Cable, Sample Electrodes, Operating Manual
& Set-Up DVD
• Stick/TIG package includes 10 ft TIGTorch with
Accessory Kit & Argon Regulator
VICTOR TECHNOLOGIES Code: 395
Website: www.victortechnologies.com
FIREPOWER ARC WELDING ELECTRODES
PART NO. SPOOL SIZE WIRE SIZE
1440-0245
2 lb
0.030”
ER5356 ALUMINUM MIG WIRE
ER70S-6 SOLID MIG WIRE
PART NO. SPOOL SIZE WIRE SIZE
1440-0240
1 lb
0.030”
PART NO. SPOOL SIZE WIRE SIZE
1440-0241
1 lb
0.035”
1440-0210
1440-0445
3 lb
0.035”
E71T-GS FLUX CORE WIRE
2 lb
0.023”
1440-0211
11 lb
0.023”
1440-0212
33 lb
0.023”
1440-0215
2 lb
0.030”
PART NO. SPOOL SIZE WIRE SIZE
1440-0216
11 lb
0.030”
1440-0230
1440-0217
33 lb
0.030”
2 lb
0.030”
1440-0231
10 lb
0.030”
1440-0220
2 lb
0.035”
1440-0235
2 lb
0.035”
1440-0221
11 lb
0.035”
1440-0236
10 lb
0.035”
1440-0222
33 lb
0.035”
TYPE 6010
TYPE 6011
TYPE 6013
TYPE 7014
TYPE 7018
• Premium AWS Class E-6010
• Mild steel type
• Deep penetration, welds
through rust, scale, oil and dirt
• Excellent for pipe welding, root
• DC, reverse polarity
• 60,000 PSI tensile strength
• All position electrode
• Premium AWS Class E-6011
• Mild steel type
• Deep penetration, welds
through rust, scale, oil and dirt
• Use when you are unable to
prepare the welding surface
• AC or DC, reverse polarity
• 60,000 PSI tensile strength
• All position electrode
•
•
•
•
•
• Premium AWS Class E-7014
• Iron powder type
• Designed for high deposition
and high electrode travel speed
• Medium to low penetration
• Best used with clean or
prepared welding surface
• AC or DC, reverse polarity
• 70,000 PSI tensile strength
• All position electrode
• Premium AWS Class E-7018
• Low Hydrogen Type
• Designed to produce
x-ray quality welds
• Medium penetration
• Best used with clean or
prepared welding surface
• AC or DC, either polarity
• 70,000 PSI tensile strength
• All position electrode
TYPE 6010 1 LB BOX
Premium AWS Class E-6013
Mild steel type
Designed for general purpose
Excellent for low heat applications
Best used with clean or prepared
welding surface
• AC or DC, reverse polarity
• 60,000 PSI tensile strength
• All position electrode
10 LB BOX 50 LB BOX
5 LB BOX
10 LB BOX 50 LB BOX
Part No.
Part No.
Part No.
Part No.
Rod Size
Part No.
Part No.
Part No.
Part No.
3/32"
–
1440-0474
–
–
3/32"
1440-0115
1440-0116
1440-0117
1440-0118
1/8"
–
1440-0473
–
–
1/8"
1440-0105
1440-0106
1440-0107
1440-0108
5/32"
–
1440-0475
–
–
5/32"
1440-0095
1440-0096
1440-0097
1440-0098
5 LB BOX
10 LB BOX 50 LB BOX
5 LB BOX
10 LB BOX 50 LB BOX
TYPE 6013 1 LB BOX
TYPE 6011 1 LB BOX
TYPE 7014 1 LB BOX
Rod Size
Part No.
Part No.
Part No.
Part No.
Rod Size
Part No.
Part No.
Part No.
Part No.
3/32"
1440-0145
1440-0146
1440-0147
1440-0148
3/32"
1440-0205
1440-0206
1440-0207
1440-0208
1/8"
1440-0134
1440-0135
1440-0136
1440-0137
1/8"
1440-0200
1440-0201
1440-0202
1440-0203
5/32"
1440-0124
1440-0125
1440-0126
1440-0127
5/32"
1440-0150
1440-0151
1440-0152
1440-0153
TYPE 7018 1 LB BOX
5 LB BOX
10 LB BOX 50 LB BOX
Rod Size
Part No.
Part No.
Part No.
Part No.
3/32"
1440-0195
1440-0196
1440-0197
1440-0198
1/8"
1440-0185
1440-0186
1440-0187
1440-0188
5/32"
1440-0180
1440-0181
1440-0182
1440-0183
VIC
CTOR TECHN
NOLOGIES
5 LB BOX
Rod Size
TOOLS AND EQUIPMENT
ER 308L STAINLESS STEEL MIG WIRE
2
KUTMASTER Code: 586
Website: www.kutmaster.com
TOOLS AND EQUIPMENT
RED RESCUE KNIFE
LINER LOCK MINI
TOOL COMBO
• Tanto blade
• Dual grind piercing edge
• 420 high carbon stainless steel
HI-TECH LINER LOCK
G10 LINER LOCK
• 420 grade stainless steel blade
• Serrated blade for heavy duty cutting
• Thumb stud on the blade
• Black titanium coated blade
• Razor sharp tapered edge
• Vented multi coloured handle
TACKLE BOX
FILLET KNIFE KIT
OUTDOORSMAN’S KIT
BASE CAMP
CUTLERY SET
• 6” and 8” cushioned
grip fillet knives
• Bait knife
• Ceramic cross
stick sharpener
• 6' tape measure
• Quicksnip line clipper
• 14” cutting board
•
•
•
•
Heavy duty utility field saw
7-1/4” hi-tech liner lock knife
4” gut hook field dressing knife
Hi-tech fixed blade taper ground knife
•
•
•
•
•
•
7” santuku
5-1/2” fillet
4-3/4” boning knife
3” paring knife
8-1/2” game shears
12-3/4” plastic
cutting board
HI-TECH ALUMINUM
LOCKBACK
BODY LOCK KNIFE
• Spring activated locking design
• 420 stainless steel blade
• Nylon belt loop pouch
KUTTMASTER
3
• 11 function mini tool
• Black nylon pouch
• Lightweight Team Realtree® linerlock
• Realtree AP HD® camo handle
• 420 stainless steel blade
• Heavy duty black embroidered nylon sheath
30 FUNCTION CAT
WRENCH HEAD WITH
NYLON POUCH
HUNTER'S COMBO KIT
• T-handle design for added turning torque
• Locking blades
• 420 grade stainless steel
• 3 piece knife kit with sheath
• 4.25" gut hook, 3.75" caping and
5" boning / fillet knife
• 420 stainless steel blades
• Slip resistant handles
• Heavy duty nylon pouch
SHOP VAC CANADA LTD. Code: 154
Website: www.shopvac.ca
SHOP VAC WET/DRY VAC
•
•
•
•
•
•
•
•
•
•
•
•
4 Gallon (IMP)
18.2 Litres
5.5 peak HP
Portable Wet/Dry Vac
Convertible Blower Port
Lock-On® Hose
1.5” Accessories
3 Year Warranty
Wet/Dry Vac
Accessory Basket
Convertible Blower Port
Lock-On® Hose
• Tank Drain
• 2.5” Accessories
• 3 Year Warranty
PART NO. DESCRIPTION
962-09
10 Gallon (IMP), 5 peak HP
962-16
16.5 Gallon (IMP), 6.5 peak HP
6.5 GAL (IMP)
INDUSTRIAL S. STAGE
•
•
•
•
•
•
•
•
•
REGULAR FILTER BAG
6.5 Gallon (IMP)
Single Stage
29.5 Litres
6.5 peak HP
Industrial Wet/Dry Vac
Accessory Basket
Lock-On® Hose
1.25” Accessories
1 Year Warranty
PART NO. DESCRIPTION
Fits 5 – 8 U.S. gal, 18.9 – 30.3 litres
906-62
Fits 10 – 14 U.S. gal, 37.8 – 53 litres
906-63
Fits 15 – 22 U.S. gal, 56.8 – 83.2 litres
HIGH EFFICIENCY FILTER BAG
PART NO. DESCRIPTION
6.5 GAL (IMP)
QUIET PLUS SERIES
•
•
•
•
•
•
•
906-61
TOOLS AND EQUIPMENT
ULTRA SERIES
4 GAL (IMP)
PORTABLE CONTRACTOR
6.5 Gallon (IMP)
30.3 Litres
3 peak HP
Wet/Dry Vac
Blower Port
1.25” Accessories
2 Year Warranty
906-71
Fits 5 – 8 U.S. gal, 18.9 – 30.3 litres
906-72
Fits 10 – 14 U.S. gal, 37.8 – 53 litres
REGULAR CARTRIDGE FILTER
• Fits Shop Vac’s 5 U.S. gallon and larger
8 GAL (IMP) ULTRA
CONTRACTOR SERIES
8 Gallon (IMP)
36.4 Litres
6.5 peak HP
Stainless Steel Wet/Dry Vac
3 Wheel Dolly with Transport Handle
Accessory Basket
Convertible Blower Port
Lock-On® Hose
2.5” Accessories
3 Year Warranty
MULTI PURPOSE
FLOOR NOZZLE
• Settings for carpet and floor
• Fits 1-1/4” hose
FOAM FILTER
SHOP VAC
•
•
•
•
•
•
•
•
•
•
• Wet pickup filter
4
DV SYSTEMS Code: 695
Website: www.dvsystems.ca
TOOLS AND EQUIPMENT
SDI INDUSTRIAL COMPRESSOR
230/60/1, 7.5 HP
SDI INDUSTRIAL COMPRESSOR
230/60/1, 5 HP
S Series Industrial
Compressor 5 hp
• Cast iron, two stage, three
cylinder pump with oil
sight gauge
• Stainless steel disc valves
• Industrial motor
• Magnetic starter, and
wiring harness installed
(two stage models)
• CRN approved air receiver
S Series Industrial Compressor 7.5 hp
• Cast iron, two stage, four cylinder
pump with oil sight gauge
• Stainless steel disc valves
• Industrial motor
• Magnetic starter, and wiring
harness installed (two stage
models)
• CRN approved air receiver
SDI INDUSTRIAL COMPRESSOR
SDI INDUSTRIAL COMPRESSOR
• 13 hp industrial Honda engine
• Optional heavy duty pulley/clutch
• Cast iron, two stage, 3 cylinder,
compressor pump
• CRN and ASME approved air
receivers: 30 gallon ASME
industrial air receiver and 30
gallon horizontal air receiver
• Totally enclosed OSHA belt guard
• Unloaded starting
• Ball valve air outlet
• Splash lubrication
• Max. operating pressure 150 PSI
S Series Industrial Single
Stage 5 hp Air Compressor
• True 5 hp, 19.7 amp
commercial motor with
internal overload
protection
• High amp load rated
pressure switch
• Cast iron, single stage, 3
cylinder pump
• 60 gallon vertical air
receiver
• Maximum operating
pressure 125 PSI
MAINTENANCE KITS
DV SYSTEMS
5
Compressor 5hp - 13 hp Maintenance Kits
DV Systems kits will assist with the recommended quarterly maintenance of DV System compressors.
Kits include premium mineral oil or synthetic oil, replacement air filter and maintenance decal.
SDI MAINTENANCE KITS:
HDI MAINTENANCE KITS:
PART NO. DESCRIPTION
PART NO. DESCRIPTION
MK-100
DEV-100 pump
MK-247
247 pump
MK-55
DEV-55 pump
MK-445
445 pump
MK-40
DEV-20/30/40 pump
MK-440
440/432 pump
MK-447
447 pump
DV SYSTEMS Code: 695
Website: www.dvsystems.ca
ROTARY SCREW COMPRESSOR –
230/60/1
ROTARY SCREW COMPRESSOR –
230/60/3
B Series Rotary Screw Compressor 7.5 hp
• 100% duty cycle
• Small footprint
• Quiet operation
• 18 to 27 cfm
• Minimum noise level, 63 dBA
• Std pressure, 145 psi
• Also available in 5 hp
B series compressors are enclosed in a
sound-insulated, powder coated, heavy duty
steel cabinet. The control panel includes
the CSC50 controller featuring LCD display and start/stop operation. An
emergency stop button is part of the control pad.
C Series Rotary Screw Compressor 15 hp
• 100% continuous duty operation
• Rugged and reliable
• 27 - 61 SCFM
• Extremely quiet 63 dBA
• Load/No load operation
• Small footprint
• Tank-mounted systems
• NEW! TEFC motors
• NEW! High-efficiency enduro
rotary airends
• Also available in 10 hp
ROTARY SCREW COMPRESSOR
B Series Variable Speed Rotary Screw Compressor 10 hp
ENERGY EFFICIENT
• 10 hp tank mounted rotary screw air
compressor 37 cfm at 145 psi
• VS20 controller featuring bright
LCD display
• ASD40 dryer and 10 micron ceramic
pre-filter
• High quality North American TEFC
230/1 phase industrial electric motor
• Minimum noise level, 68 dBA
• 80 gallon receiver built to ASME codes
and CRN registered
• Maximum operating amp, 55 A RMS
• Overall dimensions
61” wide x 51” high x 30” deep
FILTERS AND CANISTERS
CANISTER ASSEMBLY PART NUMBERS:
3/8” PIPE SIZE 1/2” PIPE SIZE 3/4” PIPE SIZE
SAF-C-18
SAF-C-35
SAF-C-64
FILTER ELEMENTS PART NUMBERS:
FILTER
3/8” PIPE SIZE 1/2” PIPE SIZE
3/4” PIPE SIZE
10 Micron
SAF-S-18
SAF-S-35
SAF-S-64
1 Micron
SAF-A-18
SAF-A-35
SAF-A-64
0.1 Micron
SAF-E-18
SAF-E-35
SAF-E-64
Carbon
SAF-V-18
SAF-V-35
SAF-V-64
TOOLS AND EQUIPMENT
HIGH TEMP DRYER
Hi-Temp Dryers 18 cfm - 52 cfm
• Handles inlet temperatures up to 180°F
• Freon R134a refrigerant
• Remote signal alarm relay
• Low noise level
• Insulated secondary heat exchanger
with encapsulated stainless steel
moisture separator
• Fully digital control panel accurately
monitors dew point, compressor fan,
auto-drain and temperature
• Low maintenance
• Variable-speed fan to maintain balanced
dew point
• Cross ventilated to allow installation close to wall
• Microprocessor controlled solenoid drain valve with Y trap
• Rugged powder coated steel cabinet
• Space saving design with easy access panels for maintenance
DV SYSTEMS
DRYER
A Series Dryers 10 cfm - 500 cfm
• Patented refrigerant circuit designed to
adjust cooling capacity to suit volume
and temperature of treated air
• Two-stage heat exchanger to improve
efficiency and energy savings
• High-efficiency stainless steel moisture
separator guarantees an extremely low
pressure-drop and smooth operation
even under heavy working conditions
• Microprocessor controls on all models
keep stable dew-point and eliminate
the risk of freezing
• Automatic
• Thermally protected cooling fans, and a safety system to prevent compressor
damage due to malfunction or high working temperatures
• Powder coated, rugged steel cabinet with removable side panels
6
LINCOLN INDUSTRIAL Code: 502
Website: www.lincolnlube.com
BATTERY OPERATED GREASE GUNS
TOOLS AND EQUIPMENT
18 V LITHIUM ION POWERLUBER®
THE MOST ADVANCED GREASE GUN IN ITS CLASS!
• LCD flow meter displays
• Grease output
• Grease cartridge level
• Battery charge level
• High-capacity (3000 mA) Li Ion Battery
• Provides twice the performance and run time
• 3 times the lifespan of traditional NiCad and NiMH batteries and 20% lighter
• No fade energy output
• Low discharge rate eliminates need to recharge when idle for long periods
• 2 speed design delivers up to 9.0 oz/min (H) or 7,500 psi (L)
• Built-in LED provides light when under equipment or in shaded areas
• 36” long-reaching hose with spring guard
PART NO. DESCRIPTION
1862
Grease gun kit / 1 battery with charger and carrying case
1864
Grease gun kit / 2 batteries with charger and carrying case
1861
18 V Lithium-ion battery
1850
18 V Lithium-ion battery charger
PROFESSIONAL 18 V POWERLUBER®
SAVE TIME AND MONEY WITH THE LINCOLN 18 V POWERLUBER® DISTINCTIVE FEATURES
• Two-speed transmission gets the job done quickly
• 300% greater grease flow (up to 9 oz per minute)
• 35% more operating pressure than other cordless grease guns
• Patented stroke indicator button for grease flow measurement
OTHER KEY FEATURES FOR THE PROFESSIONAL:
• Best grease output in cold temperature operation (down to 10ºF)
• High capacity battery delivers up to 10 grease cartridges per charge
• Fast one hour “smart” charger
• Built-in overload protection
PART NO. DESCRIPTION
1842
18 V battery operated grease gun kit / 1 battery
1844
18 V battery operated grease gun kit / 2 battery
1801
18 V replacement battery
1410
18 V battery charger
1815A
DC field charger for 1801 or 1401 batteries
POWERLUBER® 12 V CORDLESS
RECHARGEABLE GREASE GUN
Lightweight, ergonomic design, continuous operation, 6000 PSI pressure relief
valve, high capacity battery, 30” whip hose with dual spring guard.
PART NO. DESCRIPTION
7
1242
12 V Powerluber battery operated grease gun kit / 1 battery
1244
12 V Powerluber battery operated grease gun kit / 2 battery
1201
12 V replacement battery
1210
12 V battery charger
1215A
DC field charger for 1201 battery
LINCOLN INDUSTRIAL Code: 502
Website: www.lincolnlube.com
HEAVY DUTY GREASE GUNS
AIR REEL ASSEMBLIES (VALUE SERIES)
HEAVY DUTY LEVER GUN
Cast iron pump head, precision fit
hardened plunger, jam proof toggle
mechanism, “Flip Over Follower”
for superior seal, 3-way loading.
•
•
•
•
•
Durable heavy-gauge steel
Slotted base allows for easy mounting
Five position adjustable outlet arm
Heavy duty rubber air hose
Ball stop included
PART NO. DESCRIPTION
83753
50' x 3/8" air reel assembly
83754
50' x 1/2" air reel assembly
PROFESSIONAL LEVER
GREASE GUN
Dual Output / Dual Pressure. Cuts lube
time in half! High output setting delivers
twice the grease per stroke. 360°
extension rotates for hard to reach
fittings. Plated barrel, head and handle.
7000 psi maximum pressure.
HEAVY DUTY
PISTOL GRIP
GREASE GUN
Easy one hand operation with
18” whip hose, die cast head, “Flip
Over Follower” for seal of both cartridge
and bulk filling, 3-way loading.
HEAVY DUTY
PISTOL GRIP
GREASE GUN
Variable stroke / variable pressure.
Includes a cast head, jam-proof
handle, 18" whip hose and a 6"
rigid tube. Develops 7500 psi
working pressure.
PROFESSIONAL
AIR OPERATED
GREASE GUN
Models for low, medium and high pressure applications, heavy duty
slotted steel base and support arm, 180˚ double ratchet teeth, dual
needle bearing design, 7 position roller arm with 4-way roller assembly.
PART NO. DESCRIPTION
94153
HD air/water hose reel assembly 50’ x 3/8”
94154
HD air/water hose reel assembly 50’ x 1/2”
94354
HD oil hose reel assembly 50’ x 1/2"
94552
HD grease hose reel assembly 50’ x 1/4"
PMV 50:1 HEAVY DUTY GREASE
PUMP FOR 120 LB CONTAINERS
Portable, heavy duty air-powered grease lubrication,
smooth and quiet.
INCLUDES: PMV high-pressure 50:1 pneumatic pump,
high-pressure grease control valve, universal swivel and
coupler, 7’ hose, drum cover, flexible follower plate and
caster base.
18 GALLON USED
FLUID RECEIVER
PRESSURIZED EVACUATION
All steel design with reinforced caster supports.
18-gallon tank with a pre set air regulator and safety
valve. 14" telescoping bowl. Allows the use of standard
shop air up to 150 psi.
Provides a safe, affordable option for draining,
transferring and evacuating motor oils, as well as
transmission and power steering fluids.
LINCOLN
• Fully automatic, continuous
operation variable speed trigger
provides excellent flow control
• Low pressure operation
(40 - 150 psi)
• Includes comport grip handle,
30” Powerluber® whip hose
and combination filler nipple /
bleeder valve
HEAVY DUTY (LFR)
HOSE REEL ASSEMBLIES
TOOLS AND EQUIPMENT
8
MITYVAC Code: 502
Website: www.mityvac.com
TOOLS AND EQUIPMENT
!
!
!
PROFESSIONAL
COMPRESSION TEST KIT
VACUUM BRAKE
BLEEDER/EVACUATOR
SILVERLINE ELITE
AUTOMOTIVE TEST KIT
Perform dry and wet engine cylinder compression
tests commonly used to detect ring or cylinder head
problems, sticking valves, blown head gasket(s) and
more. Includes adapters for use on motorcycles,
marine and small engines and an air-hold adapter for
performing valve seal repairs without removing the
cylinder head(s). Not for use on diesel engines.
•
•
•
•
•
• Provides either vacuum or pressure with
equal precision and convenience
• Features modern, ergonomic design for
comfortable, long-term use
• Performs engine performance diagnostics,
brake bleeding, fluid transfer, evacuation,
sampling, windshield repair and more
• Includes components needed to perform
hundreds of diagnostic and mechanical tests
Powerful vacuum bleeds up to 2 quarts per minute
Large 1.9 quart reservoir
Swivel air inlet provides for greater flexibility
Automatic shutoff valve – prevents overfilling
Complete with brake/clutch bleed hose with
universal bleed adapter, fluid refill kit, fluid
evacuator wand, convenient hanging hook
and bench mounted base
!
MITYVAC
9
FLUID
DISPENSING
SYSTEM
!
!
ATF REFILL
SYSTEM
PRESSURE BRAKE
BLEED SYSTEM
Designed for topping-off fluid reservoirs including gear
oil boxes, master cylinders, transmissions and power
steering reservoirs. Fluid is dispensed under pressure.
One gallon capacity with 5' hose and dispensing wand.
Fill or top-off sealed transmissions with up to 1-gallon
of fluid. Manual pump adds air above fluid level to
prevent aeration. Includes 10 pc ATF adapter kit.
Professional hydraulic brake and clutch bleeding
system. Pump kit forces new brake fluid through master
cylinder, while air and old fluid are expelled through the
bleed screw(s). Includes a 7 pc master cylinder adapter
kit and the MV6400 fluid dispenser system.
!
!
!
FLUID EVACUATOR –
PLUS
FLUID EVACUATOR
FLUID EVACUATOR –
AIR OPERATED
• Evacuates and dispenses most
automotive liquids and chemicals
including engine oil, transmission
fluid, gear oil, coolant, brake fluid
and more
• Evacuates and dispenses fluid
with simple flick of switch
• Includes 5’ flexible main hose and
two rigid dipstick hoses for oil and
transmission fluid
• Hand operated pump - no shop
air or electricity required
• Automatic flow control valve
prevents overfilling
• Evacuates all kinds of
fluids including engine oil,
transmission fluids, gear oil,
coolant, brake fluid and more
• Large 1.9 gallon reservoir
(7.3 litres)
• Hand operated pump – no
shop air or electricity required
• Includes 5’ long flex hose and
2 dipstick hoses
• Durable polyethylene
construction, will not rust
or corrode
• Extract most automotive
liquids including engine oil,
transmission fluid, gear oil,
coolant, brake fluid and more
• Includes 5’ of flexible tubing
and two rigid dipstick tubes
• Air shut off valve allows unit
to be charged first and used
away from air source
• Automatic shut off valve
prevents overfilling
TORIN Code: 174
Website: www.torinjacks.com
ENGINE STANDS
FLOOR JACKS
PART NO. DESCRIPTION
T-frame, 750 lbs lifting capacity
T24541
H-frame, 1,000 lbs lifting capacity
T25671
U-frame, 1,250 lbs lifting capacity
JACK STANDS, ONE PAIR
PART NO. DESCRIPTION
T42002
2 ton, min height 10.3”, max height 16.3”
T43002
3 ton, min height 10.9”, max height 16.4”
T46002
6 ton, min height 14.9”, max height 23.5”
T41202
12 ton, min height 18.125”, max height 28”
BOTTLE JACKS
PART NO. DESCRIPTION
T90203
2 ton, 7.1” min height, 4.6” lifting height
T90403
4 ton, 7.6” min height, 4.7” lifting height
T90603
6 ton, 8.5” min height, 5.0” lifting height
T90803
8 ton, 9.1” min height, 5.8” lifting height
T91003
10 ton, 9.1” min height, 5.9” lifting height
T91203
12 ton, 9.1” min height, 6.1” lifting height
T92003
20 ton, 9.5” min height, 5.9” lifting height
T92007A
20 ton (low profile), 7.7” min height,
3.3” lifting height
T93007
30 ton, 9.4” min height, 5.7” lifting height
T95007
50 ton, 9.3” min height, 5.7” lifting height
PART NO. DESCRIPTION
T82751
Pro Series 5500 2.75 ton jack
T83002
Pro Series 6000 3 ton jack
T83012
Quick Pump 3.5 ton jack
T83014
S.U.V. Quick Pump 3.5 ton jack
TOOLS AND EQUIPMENT
T23401
6-WHEEL
SHOP CREEPER
• Dimensions: 37.5" x 17.5" x 4.43"
• Gross weight: 15.4 lbs
SHOP PRESSES
FARM JACK
PART NO. DESC.
TOOL CARTS
4-WHEEL
CREEPER SEAT
All steel construction
2 lockable casters
4 swivel casters
3 tool mats included
Gross weight: 61 lbs
• Dimensions:
16.5" x 14.25" x 14.23"
with tool caddy
• Gross weight: 9.50 lbs
12 ton
T52001
20 ton
48" farm jack
7,000 lbs lifting capacity
Lifting range: 4.5" to 37.5"
Gross weight: 33 lbs
MOTORCYCLE JACK
• Capacity: 1,500 lbs
• Lifting Range: 5.125" x 16.625"
• Gross weight: 80.46 lbs
TORIN
•
•
•
•
•
T51201
•
•
•
•
10
WARN INDUSTRIES Code: 990
Website: www.warn.com
TOOLS AND EQUIPMENT
XT30 EXTREME
ATV WINCH
Pulls up to 3,000 lbs. Riders looking for the most extreme winch on the
ATV market will want the XT30 for its advanced features. Includes 50 ft
of lightweight and easy to handle synthetic rope, wireless remote control
system, roller fairlead and handlebar mounted control switch.
PULLZALL
LIFTING & PULLING TOOL
Lifts or pulls up to 1,000 lbs. Strong motor
and variable speed control with 15' (4.6 m)
wire rope. Two versions: 120 V AC for use
where power is available; 24 V battery pack
for use in the field (includes two rechargeable
battery packs). Unlimited applications.
PART NO. DESCRIPTION
885000
PullzAll 120 V AC, Corded
885005
PullzAll 24 V DC, Cordless
3700 DC 12 V
ELECTRIC WINCH
Pulls up to 3,700 lbs. For heavy duty power ideally
suited to trailers and work sites. Includes wire rope,
roller fairlead and wired remote control.
MEDIUM DUTY WINCHING
ACCESSORY KIT
ATV/UTV WINCHING
ACCESSORY KIT
RT25 ATV WINCH
Designed for winch capacities to 9,500 lbs with 5/16"
wire rope. Includes one shackle, 19,000 lbs maximum
capacity snatch block, one 2" x 8' (5 cm x 2.4 m)
tree trunk protectors, 10' (3 m) choker chain, red
heavyweight nylon case.
Includes two shackles, snatch block, two 1" x 8'
(25.4 mm x 2.4 m) tree trunk protectors, black
heavyweight nylon case.
THE WARN
PLOW SYSTEM
WARN
11
When your job calls for a reliable, versatile plow system, look
no further than WARN Industries. Engineered as a system
for durability and maximum performance, WARN plows
feature integrated design elements that make your work easier.
Our plows feature high-strength steel blades with reinforced
ribs for outstanding durability.
BUILD YOUR PROVANTAGE ATV PLOW SYSTEM AT:
www.warn.com/atv/plows/provantage_how_to_order.shtml
Pulls up to 2,500 lbs. Best selling, versatile and
durable. Includes 50' wire rope, roller fairlead and
handlebar mounted control switch.
WARN INDUSTRIES Code: 990
Website: www.warn.com
Compact, tough and reliable. Pulls up to 8,000 lbs. The WARN M8000 winch has been
trusted by off-roaders for over twenty years. Its low-profile design allows for a variety
of mounting options. Now available in two versions: wire rope with roller fairlead or
WARN Spydura synthetic rope with polished aluminium hawse fairlead. Includes 100 ft
of steel or synthetic rope, hand-held remote control and relevant fairlead.
PART NO. DESCRIPTION
26502
Wire rope, 12 V
87800
Spydura synthetic rope, 12 V
VR10000 WINCH
Big on power and big on value - pulls up to 10,000 lbs. Separate control pack for
various mounting options. Available in two versions: wire rope with roller fairlead
or WARN Spydura synthetic rope with polished aluminium hawse fairlead. Includes
94 ft of steel or 100 ft of synthetic rope, hand-held remote control and relevant fairlead.
PART NO. DESCRIPTION
86255
Wire rope, 12 V
87840
Spydura synthetic rope, 12 V
SERIES 30XL HYDRAULIC WINCH
Pulls up to 30,000 lbs. For heavy tow, utility and trailer applications. Powerful
12.0 cubic inch hydraulic motor allows for extended duty. Hardened steel, two-stage
planetary gear train delivers efficient and reliable operation plus fast line speed.
TOOLS AND EQUIPMENT
M8000 PREMIUM WINCH
PART NO. DESCRIPTION
77880
Standard drum, manual clutch
77900
Standard drum, air clutch
77890
Long drum, manual clutch
75990
Long drum, air clutch
WARN
WARN HD STEEL BUMPERS
FOR FULL SIZE TRUCKS
Ford, Dodge and Chevy. For
when you want the ultimate
front bumper with or without
tubular grill/brush guard.
Commercial duty rated
and fleet approved, welded
one-piece construction with
integrated light ports and
additional light mounting holes.
Includes WARN W350F Fog
Lights with wireless remote
control and mounting system
for WARN large frame winches.
APPLICATION CHART:
www.warn.com/truck/mounting-systems/heavy_duty_bumper_app.shtml
12
TANAKA® Code: 870
Website: www.tanaka-usa.com and www.tanakapowerequipment.com
TOOLS AND EQUIPMENT
$
32 CC ONE MAN AUGER,
POWERHEAD ONLY
• 32 CC, 1.6 HP two-stroke engine
• S-Start system reduces the amount of pull-force required
by 40 percent
• Tall wrap-around handles protect the engine from damage
• Sound reduction system
• Primer for fast starting
• 33.2 ft-lb output torque
• One-year commercial warranty
• 17.6 lb
• AUGER BITS SOLD SEPARATELY
43 CC BACKPACK BLOWER
WITH SIDE MOUNTED
THROTTLE
•
•
•
•
•
43 CC, 2.4 HP two-stroke engine
500 CFM
200 MPH
69 dBA
20.9 lb
$
25 CC POLE SAW
•
•
•
•
25 CC, 1.3 HP PureFire two-stroke engine
Comes with 10” bar and chain
90” (7.5 ft) overall length
11.4 lb
$
“INSPIRE” 23 CC STRAIGHT
SHAFT TRIMMER WITH TAP HEAD
•
•
•
•
23 CC, 1.2 HP PureFire two-stroke engine
60” solid steel drive shaft
5” semi-automatic head
12.5 lb with cutting head
MINI-CULTIVATOR
ATTACHMENT
• Digs 4” wide and 6” deep
• 49:1 gear reduction
• Fits Tanaka straight shaft trimmers 21 CC to 32 CC
"%
32 CC REAR HANDLE CHAIN SAW
•
•
•
•
•
32 CC, 1.6 HP PureFire two-stroke engine
16” Oregon bar and chain, 3/8” pitch
Extra large fuel tank
Side access chain tensioner
8.4 lb
"
50 CC WALK-BEHIND EDGER
•
•
•
•
•
50 CC, 2.5 HP Tanaka two-stroke engine
Solid steel drive shaft
Heavy-duty, two-stage air filtration system
Unique height adjustment system
54 lb
"$
27 CC DRILL
WITH REVERSE
TANAKA
13
•
•
•
•
•
•
27 CC, 1.4 HP PureFire two-stroke engine
20:1 gear reduction
Powered reversing feature
Dual position padded front handle
Heavy-duty fuel tank protector
12.3 lb
BAR AND
CHAIN
OIL 1 QT
OIL-PERFECT
MIX 16 OZ
GARANT Code: 633
Website & Online Catalogue: www.garant.com
NORDIC NA110LS
ALUMINUM
SNOW SHOVEL
YUKON YFSW7D ICE
SCRAPER 6.5”
• Aluminum snow shovel
• 11” non painted
aluminum blade
• Stained ash handle
• Sidewalk scraper
• 6 1/2” industrial grade forged
and tempered steel blade
• Premium ash handle
• Steel D-grip
GARANT
APRS106 SNOFLEX
COMPACT SHOVEL
• 10.6” SnoFlex
emergency shovel
• Poly with multi-grip handle
and locking system
YUKON YPP36KU
SNOW PUSHER
YUKON ERGO YPSS26
POLY SLEIGHT SHOVEL
• Extra-wide 36” snow pusher
• Poly blade
• Tubular steel ergo handle
• Ergonomic 23 1/2”
sleigh shovel
• Poly scoop
• Steel wear strip
• Ergo tubular
steel handle
GRIZZLY GIPM18KD
POLY SNOW SHOVEL
GRIZZLY
GIPP26KD POLYPRO
PUSHER
• All purpose 18” mountain mover
• Polypropylene blade
• Stained ash handle
• All purpose 26” pusher
• Polypropylene blade
• Stained ash handle
GRIZZLY GIP139KD
ALL-PURPOSE
POLYPRO SHOVEL
GRIZZLY GIPP21KD
POLYPRO PUSHER
• All purpose 21” pusher
• Polypropylene blade
• Stained ash handle
GARANT
GPRR24T
ROOF RAKE
• Telescopic roof rake
• 24” poly blade
• Ultralight aluminum oval
handle with non-slip grip
• Integrated push-buttons
on the handle
• Extends to 16.5 ft
(5.03 m) with non-slip grip
GARANT
• All purpose 14” shovel
• Polypropylene blade
• Stained ash handle
TOOLS AND EQUIPMENT
14
OMEGA Code: 600
Website: www.omegalift.com
Online Catalogue: www.shinnfuamerica.com/Temp/2354.pdf
PART NO. DESCRIPTION
TOOLS AND EQUIPMENT
BOTTLE JACKS
•
•
•
•
•
•
•
•
•
Hydraulic system is protected from internal damage by a patented bypass mechanism
Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
Fabricated from hard-cast steel with heat-treated critical stress areas
Serrated heat-treated saddle provides generous lifting area and secure grip
Heat-treated extension screw allows low pick-up height adjustment and maximum lift height
U.S. Patented built-in bypass device protects hydraulic system from over pumping damage
Unique cross-type forged release valve assures positive control
A wide, rugged base provides stability and strength
Critical stress points are reinforced in all models for added durability and dependability
• Effortless air operation will greatly reduce operator fatigue and
speed up the efficiency of garage work
• The powerful, compact, Air Turbo Motor (U.S. Patent No. 5,341,723)
raises a load to the desired height efficiently, effortlessly and safely
• A built-in bypass device (U.S. Patent No. 5,946,912) protects
hydraulic system from over pumping damage
• Versatile “Quick Connector” design provides for easy removal of
air hose from air motor
PART NO. DESCRIPTION
allowing compact
storage or remote
18125
12 ton air bottle jack
operation
20 ton air bottle jack
• All air bottle jacks have
18202C
(heavy duty base)
chrome plated rams
18205
20 ton air bottle jack
18502
50 ton air bottle jack
(heavy duty base)
2 ton bottle jack
10045C
4 ton bottle jack
10065C
6 ton bottle jack
10085C
8 ton bottle jack
10120
12 ton in-line bottle jack
10125C
12 ton bottle jack
10128
12 ton in-line shorty bottle jack
10129C
12 ton shorty bottle jack
10200
20 ton bottle jack
10205C
20 ton bottle jack
10208
20 ton in-line shorty bottle jack
10209C
20 ton shorty bottle jack
10300
30 ton in-line bottle jack
16123
12 ton ALL directional bottle jack
16203
20 ton ALL directional bottle jack
AIR OPERATED BOTTLE JACKS
OMEGA
15
10025C
STANDARD SERVICE JACKS PART NO. DESCRIPTION
• Hydraulic unit is protected from internal
damage due to ram overtravel by patented
safety bypass system
• Extra wide wheels and solid stance
designed for stability under load stress
• Largest saddle in this category as allowed
by ANSI standards
• Convenient foot pedal designed for fast, no
load lifts (per model spec)
21025
2 1/2 ton service jack
21030
3 ton service jack with foot pedal
22040C
4 ton long chassis service jack
22050C
5 ton long chassis service jack
22100C
10 ton long chassis service jack
JACK STANDS
• Sturdy, welded steel construction for superior safety and strength
• Heavy gauge, steel frame helps prevent distortion or twisting
PART NO. DESCRIPTION
32035
3 ton heavy duty ratchet jack stands
32065
6 ton heavy duty ratchet jack stands
TOE JACK
32066
6 ton heavy duty Magic Lift jack stands
• 10 ton toe jack
• Heat treated and chromed
medium-carbon steel cylinder
• Chrome plated ram guarantees
longer seal life and optimum
performance
• Hydraulic system is protected
from internal damage by a
patented bypass mechanism
32075
7 ton forklift stand pin style
32105
10 ton medium lift pin style jack stand
32107
10 ton high lift pin style jack stand
32125
12 ton heavy duty ratchet jack stands
32126
12 ton heavy duty Magic Lift jack stands
32225
22 ton truck stands pin style
OMEGA Code: 600
Website: www.omegalift.com
Online Catalogue: www.shinnfuamerica.com/Temp/2354.pdf
TRANSMISSION JACKS - FLOOR STYLE
• Single-stage chrome-plated rams maximize its high reach
operated by a user-friendly foot pedal
• Extra-wide base lowers center of gravity and promotes stability
• A unique handle release pedal provides safety in lowering the load
• Rugged steel wheels and full swivel ball bearing casters
• The adjustable head can be tilted forward, backward and side to
side for optimum alignment of transmission bolt patterns and pins
• Rugged steel wheels and full swivel ball bearing casters
• Hydraulic system is protected from internal damage by a
patented bypass mechanism
• U.S. Patented built-in bypass device protects hydraulic
system from over pumping damage
• Multi-adjustment knobs ensure that transmission cradle is
always at the right angle to position and accept any load
• Load-restraining chain is vital for raising and lowering safety
• Four wheel casters allow easy movement,
positioning of transmission jack
PART NO. DESCRIPTION
40700
700 lb economy transmission jack
41003
1/2 ton telescopic transmission jack
42001
1 ton telescopic transmission jack with air
PART NO. DESCRIPTION
40500
Clutch jack w/ith 2" and 1 3/4" splines,
cap 500 lb
42000C
1 ton transmission floor style jack
43000
1 1/2 ton floor style transmission jack
MAGIC LIFT SERVICE JACKS
TRUCK AXLE JACKS
FORKLIFT JACKS
• Innovative design of Magic Lift offers a quicker lift for
professional performance
• U.S. patented built-in bypass device protects hydraulic
system from over pumping damage
• Metered release system allows for precise load control
• After the first pump reaches the lifting point, the jack
continues with extraordinary lifting speed to raise the load to
the desired height
• Quick rated capacity lift using air-actuated operation
• User friendly, self-returning spring minimizes
operators effort, greatly reducing fatigue
• Inline air filter traps contaminates and protects air
motor for longer life
• U.S. patented built-in bypass device protects
hydraulic system from over pumping damage
• Dual lift points for various lifting applications. The
lower point is for forklift truck lifts and the higher
point is for most farm equipment lifts
• Precision control of lifting and lowering functions
PART NO. DESCRIPTION
25023
2 ton Magic Lift service jack high lift
25030
3 ton Magic Lift service jack
25032
3 ton Magic Lift service jack with jack stands
25048C
4 ton Magic Lift service jack
25057
5 ton Magic Lift service jack
25107
10 ton Magic Lift service jack
26020
2 ton aluminum racing jack
27025
2 1/2 ton Magic Lift service jack 2 piece handle
27026
2 1/2 ton Magic Lift service jack 1 piece handle
27036
3 1/2 ton Magic Lift service jack 1 piece handle
27037
3 ton Magic Lift service jack - 1 piece handle
29023
2 ton long chassis low profile jack
29025
2 ton low profile jack
PART NO. DESCRIPTION
23221C
22 ton air hydraulic truck jack
23227
22/35 ton air hydraulic truck jack
23501
50 ton air hydraulic truck jack
PART NO. DESCRIPTION
28047
4 ton air hydraulic
28045
4 ton hydraulic
ENGINE STANDS
OMEGA
PART NO. DESCRIPTION
TOOLS AND EQUIPMENT
TRANSMISSION JACKS - UNDER CAR
30750
750 lb engine stand, H type
31250
1,250 lb engine stand, U type
16
OMEGA Code: 600
Website: www.omegalift.com
Online Catalogue: http://www.shinnfuamerica.com/Temp/2354.pdf
TOOLS AND EQUIPMENT
WHEEL DOLLY
Hydraulic system actuated to provide smooth, positive power for the
removal and installation of single, tandem and duplex tires and wheels
PART NO. DESCRIPTION
47050
3/4 ton wheel dolly (roller cradle type)
47053
3/4 ton wheel dolly (cradle type)
ENGINE CRANES & JACKS
PART NO. DESCRIPTION
• Heavy duty welded construction with rugged
reinforced tubular steel
• Metered control release valve for lowering
boom at a precisely-controlled rate of speed
• Special 8 ton hydraulic long rams are equipped
with a patented built-in bypass mechanism
44010
1 ton foldable engine crane
44020
2 ton engine crane
44940
4 ton crane jack
44980
8 ton crane jack
44700
700 lb engine support bar
PORTABLE BODY REPAIR KITS
• Designed for applications of pushing, spreading and pressing
of vehicle body panels as well as various component parts and
assemblies
• A variety of attachments are included
• Pumps are rated from 8,000 to 10,000 PSI
• Perfect-fit attachments use quick-connect technology for effortless
assembly
• Sets are portable for easy usage in shop or on the road
• Custom fitted, rugged blow-molded storage case
• U.S. Patent No. 5,520,400
PART NO. DESCRIPTION
50040
4 ton body repair kit with plastic case
50100
10 ton body repair kit with plastic case
MOTORCYCLE/ATV JACK
OMEGA
17
• 1,500 lb jack
• Safety lock mechanism for
supporting purpose
• Rubber padded lifting platform
prevents scratching and protects
your machine
• Non-slip foot pedal allows for
effortless lifting of load
• Foot pedal operated power unit
• Tie down strap
SHOP PRESSES
• Ideal for the removal or installation of gears,
universal joints, pulleys, wrist pins, and other
various press jobs
• Excellent for bending, bonding, or
straightening applications
• Multi-position bed for work height adjustment
• Heavy steel welded construction
PART NO. DESCRIPTION
60120
12 ton shop press with bottle jack
60123
12 ton shop press with hand pump
60200
20 ton shop press with bottle jack
60253
25 ton shop press with hand pump
65123
12 ton bench press with hand pump
OMEGA Code: 600
Website: www.omegalift.com
Online Catalogue: http://www.shinnfuamerica.com/Temp/2354.pdf
TRUCK RAMPS
• Fast and safe technology for professional mechanics
• Heavy gauge, steel frame helps prevent distortion or twisting
• Ideal to support the exhaust system, shock absorber and
other vehicle components during an under vehicle repair
•
•
•
•
Specifically designed for heavy-duty tasks
Steel wheels design for extra durability
Long T-handle increases mobile efficiency
Sold and to be used only in pairs
CREEPERS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
31500
3/4 ton auxiliary stand
93200
20 ton truck ramps (13.5" width)
31501
3/4 ton auxiliary stand with foot pedal
93201
20 ton truck ramps (18.25" width)
33020
2 ton tripod auxiliary stand
91000
Z Creeper
92450
Toolbox Creeper
TOOLS AND EQUIPMENT
AUXILLARY AND TRIPOD STANDS
HEIN-WERNER AUTOMOTIVE Code: 600
Website: www.heinwerner-automotive.com
Online Catalogue: www.shinnfuamerica.com/Temp/2353.pdf
ALL HEIN-WERNER PRODUCTS ARE MADE IN THE USA AND HAVE A 2 YEAR WARRANTY
VEHICLE STANDS
PART NO. DESCRIPTION
HW93503
3 ton vehicle stands
HW93506
6 ton vehicle stands
HW93524
7 ton forklift stands
HW93526
25 ton vehicle support stands
LONG CHASSIS FLOOR JACKS
FLOOR JACKS
• Heavy duty construction
• Large castors and wheels for easy maneuvering
PART NO. DESCRIPTION
• Over performs specifications, long life, designed
HW93642
2 ton service jack
for the discriminating professional, repairable
HW93652
3 ton service jack
• Heavy duty construction
• Large castors and wheels for easy maneuvering
• Over performs specifications, long life, designed
for the discriminating professional, repairable
PART NO. DESCRIPTION
HW93657
4 ton long chassis service jack
HW93667
4 ton long chassis service jack with air
OMEGA & HEIN
N-WERNER
• Sold in pairs
• Tough rugged construction
• Easy to use, builds user confidence
and lends to more frequent usage
18
HEIN-WERNER AUTOMOTIVE Code: 600
Website: www.heinwerner-automotive.com
Website: www.shinnfuamerica.com/Temp/2353.pdf
ALL HEIN-WERNER PRODUCTS ARE MADE IN THE USA
AND HAVE A 2 YEAR WARRANTY
TOOLS AND EQUIPMENT
3/4 TON WHEEL
DOLLY
20 TON TRUCK AXLE JACK
• For handling of dual wheels
and large single wheels
• Handles up to 52” diameter
tires and wheels
• Load levelers aid alignment
• Carriage arm rollers with
self-lubricating bearings
• 2 swivel ball bearing casters
for easy positioning
• Wide frame and lifting carriage
• Handy tool/parts tray on frame
10 TON WHEEL LIFT SYSTEM
•
•
•
•
•
•
•
•
Lifts engage wheels without needing to remove panels on vehicle
Raise front or rear end of vehicle using a single controller
Load retention pin allows lifts to function as stands
Wide base ensures stability
Completely air operated, no electrical connections required
Safety latch design provides six different locked positions
Portable! Use in any area of the shop
Sold and to be used in pairs
10 TON AIR OPERATED END LIFT
HEAVY DUTY TRUCK
TRANSMISSION JACK
• Lifts 10 tons at 200 psi
• Two 12” pneumatic rear tires and two 6” casters for
easier transport and positioning under load
• Less maintenance with one large cylinder
HEIN-W
WERNER
19
• Lifting tractors, trucks, construction equipment,
and other agricultural equipment by the axle,
suspension, or frame
• Compact, powerful design quickly lifts rated capacity
• Large 8” rubber wheels
• Low height allows lifting from axle or suspension
• Pressure relief valve prevents overloading
• Rapid two-speed air hydraulic action quickly
advances ram to load
• Chrome plated plunger for extended jack life
• 1 ton floor style transmission jack
• Wishbone design allows unit
more mobility
• Tubular steel frame
• 360° Swivel casters
• Load restraint chain
• Designed for heavy
duty transmissions
PORTO-POWER Code: 600
Website: www.blackhawk-automotive.com
Online Catalogue: www.shinnfuamerica.com/Temp/605.pdf
PORTABLE BODY REPAIR KITS
PART NO. DESCRIPTION
B65114
4 ton body repair kit with plastic case
B65115
10 ton body repair kit with plastic case
B65041
20 ton porto-power kit with case
BODY KIT ACCESSORIES
PART NO. DESCRIPTION
B65152
90 degree V base B65114
B65153
Wedge head B65114
B65154
Plunger toe B65114
B65156
Flat base B65114
B65158
6" extension tube B65114
B65161
19 1/2" extension tube B65114
TOOLS AND EQUIPMENT
• Designed for applications of pushing, spreading and pressing of vehicle
body panels as well as various component parts and assemblies
• A variety of attachments are included
• Pumps are rated from 8,000 to 10,000 PSI
• Perfect-fit attachments use quick-connect technology
for effortless assembly
• Sets are portable for easy usage in shop or on the road
• Custom fitted, rugged blow-molded storage case
• U.S. Patent No. 5,520,400
HYDRAULIC CYLINDERS
Threaded, snap style or regular style
PART NO. DESCRIPTION
B65139
5 ton flat body ram with adapters
B65187
4 ton porto-power ram B65114
B65442
10 ton ram 6" stroke, threaded
B65444
10 ton 10" stroke, threaded
B65454
5 ton pull ram
HOSES, COUPLERS AND FITTINGS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
B65280
1/4" complete coupler set
B65129
Reducer from 3/8" to 1/4"
B65281
1/4" hose half coupler
B65131
1/4" NPTF gauge fitting
B65282
1/4" ram half coupler
B65132
Bushing from 1/4" to 3/8"
B65590
3/8" ID, 10' hose with male (B65581)
coupler, 3/8" NPTF
3/8" ID, 6' hose with male (B65581)
half coupler, 3/8"
B65580
3/8" complete coupler set
B65593
B65581
3/8" hose half coupler
B65594
3/8" ID, 6' hose, 3/8" NPTF Connection
B65582
3/8" ram half coupler
B69477
1/4" ram half coupler for B65114 & B65115
B69478
1/4" hose half coupler for B65114 & B65115
PORTTO-P
POWER
B65291
1/4" ID, 6' hose with male (B69478)
coupler, 1/4" NPTF
20
MR. HEATER Code: 558
Website: www.mrheater.com
$
MR. HEATER HAND HELD TORCH
TOOLS AND EQUIPMENT
Model #MH500PT 500,000 BTU/hr forced propane. 10 foot hose, excess
flow P.O.L. fitting, 24" handle, lightweight, easy to use, CSA approved.
FORCED AIR PROPANE
PART NO. DESCRIPTION
F270035
MH35FA - 35,000 BTU/hr, heats up to 800 sq ft, operates up to 12 hr from a 20 lb BBQ type propane tank
F228160
MH60FAV - 30,000 - 60,000 BTU/hr, heats up to 1,250 sq ft, operates up to 14 hr from a 20 lb BBQ type propane tank on a low setting
F270085
MH85FAV - 50,000 - 85,000 BTU/hr, heats up to 2,000 sq ft, operates up to 8 hr from a 20 lb BBQ type propane tank on a low setting
F270125
MH125FAV - 75,000 - 125,000 BTU/hr, heats up to 3,000 sq ft, operates up to 11 hr from a 40 lb or larger propane tank on a low setting
F270170
MH170FAVT - 125,000 - 170,000 BTU/hr, heats up to 4,000 sq ft, operates up to 17 hr from a 100 lb propane tank on a low setting
F272425
MH400FAVT - 250,000 - 400,000 BTU/hr, heats up to 9,000 sq ft, operates up to 17 h ron two 100 lb propane tanks on low setting
PORTABLE BUDDY PROPANE HEATER
PART NO. DESCRIPTION
F215120
MH4B - Little Buddy Heater, 3,800 BTU, heats up to 200 sq ft
F232050
MH9BX - Buddy Heater, 2 heat settings:
4,000 & 9,000 BTU, heats up to 200 sq ft
F274865
MH18B - Big Buddy Heater, 3 heat settings:
4,000, 9,000 & 18,000 BTU, heats up to 400 sq ft
FORCED AIR KEROSENE
PART NO. DESCRIPTION
F270255
MH50KR - 50,000 BTU/hr, heats up to 1,200 sq ft,
operates up to 11 hr on a full tank
F270270
MH75KTR - 75,000 BTU/hr, heats up to 1,750 sq ft,
operates up to 11 hr on a full tank
F270320
MH125KTR - 125,000 BTU/hr, heats up to 3,000 sq ft,
operates up to 9 hr on a full tank
F270370
MH175KTR - 175,000 BTU/hr, heats up to 4,250 sq ft,
operates up to 9 hr on a full tank
F270385
MH210KTR - 210,000 BTU/hr, heats up to 6,000 sq ft,
operates up to 9 hr on a full tank
PROPANE CONVECTION/FORCED AIR HEATERS
$
$
CORDLESS FORCED AIR HEATER
PART NO. DESCRIPTION
F227900
MH35CLP Hero - 35,000 BTU/hr. Forced
Propane. Quiet technology 12.5 dB, 8 hr on
single charge. CSA Approved.
F228810
MH60CLP Hero - 30,000-60,000 BTU/hr.
Forced Propane. Quiet technology 12.5 dB, 4 hr
on single charge. Propane. CSA Approved.
PORTABLE RADIANT HEATER
LIQUID PROPANE
PART NO. DESCRIPTION
F270700
MH35LP - 35,000 BTU/hr,
heats up to 800 sq ft
F270800
MH125LP - 125,000 BTU/hr,
heats up to 3,000 sq ft
PART NO. DESCRIPTION
F270480
MH80CV - Propane Convection Heater, 30,000 - 80,000
BTU/hr, heats up to 1,900 sq ft, operates up to 14 hr from a
20 lb propane tank on a low setting
F270600
MH200CV - Propane Convection Heater, 75,000 - 200,000
BTU/hr, heats up to 4,700 sq ft, operates up to 29 hr from a
100 lb propane tank on a low setting
GARAGE/SHOP HEATER NATURAL GAS OR LIQUID PROPANE
MR
R.H
HEATER
21
PART NO. DESCRIPTION
$
F272275
MH25LP - 22,000 BTU/hr (propane) heats up to 500-600 sq ft
“ORIGINAL” TANK TOP HEATER
F272290
MH25NG - 25,000 BTU/hr (natural gas) heats up to 500-600 sq ft
F272700
MH40LP - 40,000BTU/hr (propane) heats up to 750 sq ft
F272800
MH40NG - 40,000BTU/hr (natural gas) heats up to 750 sq ft
F208850
MHT45NG - 40,000 BTU/hr (natural gas)
F208851
MHT45LP - 40,000 BTU/hr (propane)
$
PART NO. DESCRIPTION
F242100
MH15T - 8,000-15,000 BTU/hr.
Single Element. CSA Approved.
F242650
MH30T - 8,000-30,000 BTU/hr.
Two Element. CSA Approved.
MR. HEATER Code: 558
Website: www.mrheater.com
UNIT HEATER - 50,000 BTU/HR
PART NO. DESCRIPTION
F260410
MHU50LP - Propane
F260420
MHU50NG - Natural Gas
$
UNIT HEATER - 80,000 BTU/HR
115 Volts. Heats up to 1,000 sq. ft. Easily heats a 3 - 4 car
garage. Spark ignition features self-diagnostic control module.
3 year limited warranty. CSA approved.
PART NO. DESCRIPTION
F260430
MHU80LP - Propane
F260440
MHU80NG - Natural Gas
$
MR. HEATER ACCESSORIES
FUEL CONVERSION KITS
Fuel conversion kit for Big Maxx MHU50/80 unit heaters
PART NO. DESCRIPTION
F260163
From NG to LP
F260164
From LP to NG
$
$
24 VOLT THERMOSTAT
UNIVERSAL HOOK
UP KIT STOCK
•
•
•
•
Class 2 milivolt systems
CUL Approved
Standard thermostat for any low voltage heater
Will fit MHU, MHT Mr. Heater units
• 22” Stainless steel flex gas connector
• Brass shut-off valve
$
$
4” VERTICAL VENT KIT
4” HORIZONTAL VENT KIT
3” VERTICAL VENT KIT
For 80,000 BTU Models Only. (MHU75NG/LP).
Includes: (1) 3” x 4” increaser, (1) 4” adapter, (1)
4” x 36” B-vent pipe, (2) 4” x 24” vent pipe, (1) 4”
45-degre elbow, wall thimble, termination tee,
adjustable roof flashing, storm collar and vent cap.
For 50,000/80,000 BTU Models (MHU50/80/NG/LP).
Includes: (1) 3” x 4” increaser, (1) 4” adapter, (1) 12”
straight section, (1) 6” - 19” variable straight section,
(1) 4” 45-degree elbow, wall thimble and termination tee.
For 50,000 BTU Models Only (MHU50NG/LP, MHT45NG/LP).
Includes: (1) 3”x 4” adapter, (1) 3” x 36” B-vent pipe, (2) 3” x
24” vent pipe, (1) 3” 90-degre elbow, wall thimble, adjustable
roof flashing, storm collar and vent cap.
All parts for the MHU 45 and 50 units will meet local codes
for vertical exhaust. Limited one year warranty.
MR
R.H
HEATER
$
Product specifications and appearance are subject to change without notice.
Product images may not be precise.
TOOLS AND EQUIPMENT
115 Volts. Heats up to 700 sq. ft. Easily heats a 2 - 3 car garage.
Spark ignition features self-diagnostic control module. Vent kit and
thermostat sold separately. 3 year limited warranty. CSA approved.
22
HITACHI® Code: 870
Website: www.hitachipowertools.com
TOOLS AND EQUIPMENT
HXP LI-ION 18 V COMPACT
PRO DRIVER DRILL
18 V 1.5 AH LITHIUM ION
COMPACT PRO IMPACT DRIVER
• 460 in/lb of torque to power through the
toughest jobs
• 1.5 Ah HXP Li-ion slide batteries feature extended
run time, fade free power, 40% less weight (0.9
lbs) than standard Ni-Cd/Ni-Mh batteries
• 1/2” racheting keyless metal chuck accepts a
wide range of bits that can be changed quickly
and easily
• 22+1 clutch offers 22 drive settings and one
drill mode for both high torque applications and
precision driving
• Covered by Hitachi’s Lifetime Lithium Ion Tool
Warranty & 2-Year Lithium Ion battery warranty
• 1,280 in/lb of driving torque for heavy applications
like tightening carriage bolts, driving lags and
sinking deck screws
• Patented battery charger circuitry prevents
overheating and power loss
• Master impact driving with a no-load speed of
up to 2,600 RPM and a 3,200 BPM impact rate
• 2 x 1.5 Ah Lithium Ion slide batteries improve
ergonomics and balance while extending run time,
delivering fade free power and weighing 40% less
than standard Ni-Cd and Ni-MH batteries
• Covered by Hitachi’s Lifetime Lithium Ion Tool
Warranty & 2-Year Lithium Ion battery warranty
HXP LI-ION 18 V 4-PIECE COMBO KIT
• Includes the most powerful 18 V HXP Li-ion Hammer Drill on the market with 570
in/lbs of torque, a C18DL 6-1/2” Circular Saw equipped with an electric brake and
built-in spotlight, a heavy-duty 18 V HXP Li-ion Reciprocating Saw with fan cooled
motor and soft grip handle, a powerful lantern equipped with an adjustable handle
and 2 modes of operation: LED, and fluorescent light, and a Ballistic Nylon Tool
Bag for tool storage and easy transport
• 2 x HXP Li-ion battery producing extended run time, fade free power, 40% less
weight and 3 times the power capacity of standard Ni-Cd/Ni-Mh batteries
• Cross compatible charger for charging batteries ranging from 7.2 V -18 V and for
Ni-Cd, Ni-Mh, and HXP Li-ion battery platforms
• Hitachi HXP Li-ion Tools are covered by a Lifetime Tool Warranty
• Hitachi HXP Li-ion Batteries are covered by a two year professional warranty
23
18 V HXP LI-ION COMPACT PRO 3-PIECE COMBO KIT
• Includes Hitachi’s New Compact Pro Li-ion Flashlight with 5 locking positions and
durable job site construction, the Compact Pro Impact Driver, (WH18DSAL) and
Compact Pro Driver Drill (DS18DSAL)
• 1,280 in/lb of torque to power through the toughest jobs (WH18DSAL)
• Externally accessible carbon brushes for easy and economical brush changes
to extend the life of the tool (DS18DSAL)
• 1.5 Ah HXP Li-ion slide batteries feature extended run time, fade free power,
40% less weight (0.9 lbs) than standard Ni-Cd/Ni-Mh batteries
• Patented battery charger circuitry prevents overheating and power loss
• Compact Pro Li-ion Flashlight with 5 locking positions and durable job site construction
• Covered by Hitachi’s Lifetime Lithium Ion Tool Warranty & 2-Year Lithium Ion
battery warranty
HITACHI® Code: 870
Website: www.hitachipowertools.com
TOOLS AND EQUIPMENT
$
14” PORTABLE
CHOP SAW
• Hefty 15 amp (2000 W) motor produces a
no-load speed of 3,800 RPM for greater
cutting efficiency
• Portable, rugged and lightest in class
(36.4 lbs) to withstand daily transport
between trucks and jobsites
• Versatile to cut various steel materials
like pipes, shaped steel, round bars,
angle iron and other materials like
conduit pipe, channels, tubing
and drywall track
$
10” COMPOUND MITRE SAW WITH LASER
•
•
•
•
7-1/4” CIRCULAR SAW FEATURING
IDI TECHNOLOGY
HITACHI
• Powerful 15 amp motor to tackle the toughest cutting jobs
• Patented IDI (Internal Double Insulation) technology reduces vibration and
extends tool life
• Heavy duty die-cast aluminum base with integrated scale provides stability
and accuracy
• Electric brake stops the blade quickly after the switch is released
• Magnesium housing, gear cover, blade cover and lower guard for increased
strength and smooth operation
• Includes 24 tooth premium framing blade for fast, high performance cuts
15 amp motor, intense power for the toughest cutting jobs
Large pivoting fence with a 4” cutting capacity for crown molding applications
Hitachi’s exclusive Laser Marker System for increased cutting accuracy
Horizontal handle with soft, vibration reducing Elastomer grip adds comfort
and control
• Large table, provides better material support
• Thumb actuated positive stops, easy to use for quick mitre adjustments
24
HITACHI® Code: 870
Website: www.hitachipowertools.com
TOOLS AND EQUIPMENT
!'
RECIPROCATING SAW WITH
USER VIBRATION PROTECTION
• The User Vibration Protection (UVP) counterweight mechanism reduces full-load
tri-axial vibration by over 65%, significantly reducing vibration transfer to the user
• 12 amp motor, intense power for rigorous cutting jobs
• Variable speed, both trigger and hand dial adjust for balanced control and speed
• Dual action offers both reciprocating (for metal) and “swing” for cuts twice as fast
as conventional orbital action
g of 1-1/4" at 0-3,000 spm
p for rapid
p cuttingg pperformance
• Stroke length
CR13VBY REPLACEMENT BLADES
!
7" DISC SANDER / POLISHER
(VARIABLE SPEED)
• 11 amp motor, forcible power that support a variety of applications
• Heat resistant bearing chamber and iron ball bearings to extend tool life
and durability
• 3 electronically controlled features; constant speed control, soft start,
and two way variable speed controls located on both the trigger and dial
for flexibility and control
ort
• Loop handle design for efficiency and comfort
uvverability and ease of use
• 6.1 lbs lightweight design facilitates maneuverability
PART NO. DESCRIPTION
725320
6" x 3/4 x 0.035, 10TPI, Metal, BI-M
725322
6" x 3/4 x 0.035, 14TPI, Metal, BI-M
725323
9" x 3/4 x 0.035, 14TPI, Metal, BI-M
725324
6" x 3/4 x 0.035, 18TPI, Metal, BI-M
725325
6" x 3/4 x 0.035, 24TPI, Metal, BI-M
725350
9" x 7/8 x 0.062, 6TPI, Demo, BI-M
725351
9" x 7/8 x 0.062, 8/10TPI, Demo, BI-M
&
1" DIE GRINDER, 4.7 AMP
• Powerful 4.7 amp (610 W) motor capable of 29,000
000 RPM
• Large slide switch for easy one-hand operation
gth and a
• Compact and lightweight at just 14-3/32" in length
mere 3.7 lbs
nd
• Ideal for fishing dies, press work, die casting and
molding and grinding of machine parts
&
4-1/2" GRINDER, 6.0 AMPS
WITH 5 BONUS GRINDING WHEELS
•
•
•
•
•
Powerful 6 amp motor with max output of 950 W
No-load speed of 10,000 RPM
Spindle lock, provide easy and quick disc change
Ball bearing construction for smooth operation and long life
Slide switch, easy to use with a quick-off feature to shut the tool off immediately for
added safety
• Removable side handle, improves control and comfort. 3.1 lbs, lightweight design
• 5 abrasives disc, included
1/2" IMPACT WRENCH
HITACHI
25
• Class leading torque 3, 190 in/lbs for maximum power
• Powerful 4.2 amp, 480 W motor to handle stubborn
fasteners
• Forward-reverse rocker switch to quickly
change fastening direction
• Covered in soft, yet durable elastomer for
improved durability and a non-slip grip
• Large bumper protects the tools gear cover
• Compact and lightweight at only 10.15 inches in length
and 6.2 lbs
• Constructed using Hitachi’s patented IDI technology for
remarkable durability
&
5" DISC GRINDER
• 11 amp motor, forcible output power (2,000 W) for the
toughest grinding jobs
• Low-profile head, permits access in tight areas
• Dust-proof construction prolongs armature, switch and bearing life
• Dust seal, prevents dust from entering the ball bearing on
the commutator side
• Removable side handle, improves control and comfort
• 6.2 lbs, compact and lightweight design facilitates maneuverability
and is excellent for overhead applications
GREAT PLAINS® Code: 504
Website: www.gpipumps.net
EZ-8 12 V DC FUEL PUMP
• The new EZ-8 pump is ideal for on-the-go fueling
• This 12 V electric pump delivers 8 GPM
(equivalent to standard gas stations)
• The system comes complete with power cord,
manual unleaded nozzle, three-piece, trim-to-fit
suction pipe and 10 ft of 5/8 inch hose
• Motor is UL Listed to U.S. and CSA Certified
M-150S-AU 12 V DC ALUMINUM
GEAR PUMP
• 12 V DC Aluminum Gear Pump for fuel with automatic
unleaded nozzle
• Up to 15 GPM (57 LPM)
• UL Listed Motor, CSA Certified and Overload Protected
Motor
• Includes 18 ft power cord, 3/4” x 12 ft (3.7 m) hose,
and adjustable suction pipe
M-3025-AD PUMP
•
•
•
•
•
Choose this pump when reduced fueling time is critical
Available in 12 and 24 V models
Compatible with gasoline, kerosene and diesel fuel
Delivers up to 25 GPM (95 LPM)
Designed with power and performance to complete
the toughest job
• 1 inch NPT outlet
• Includes 15 ft (4.6 m) power cord and 1 in x 12 ft
(3.7 m) hose
• Automatic nozzle
PA-120-DEF-2TC-MN,
115 V DEF PUMP
• For use with Diesel Exhaust
Fluid (DEF) Systems only
• This pump mounts only to
vented storage tanks with
2” NPT connection
• Includes 3/4 in x 12 ft
(3.7 m) EPDM hose with
3/4” NPT x 3/4” Barb connections, and adjustable
suction pipe
• Pump has built-in check valve and delivers up to
12 GPM (46 LPM)
• Available in 12 and 115 volt models
GPI offers a full line of hand pumps. The
HP-90 is an economy hand pump with a
dual-action piston to pump fluid on both
the push and pull strokes for fast fueling.
It is compatible with a wide variety of
petroleum products and fits a 2 inch
NPT bung.
• Delivers up to 25 gallons per
100 strokes (1 quart per stroke)
• Includes hose, nozzle with builtin nozzle holder, and 2-piece
PVC suction pipe
• Lightweight aluminum housing
• Built-in anti-siphon valve
M-3120-AL PUMP
MR-5-30-L6N
FUEL METER
• Choose a heavy duty pump for large farming
operations, construction or fleet operations
• This pump is built with a 1/3 horsepower motor
and designed for high performance
• The M-3120-AL is the pump of choice for heavy
equipment applications
• 115 V
• Delivers up to 20 GPM (76 LPM)
• Use for fixed locations with low viscosity petroleum
fuels such as gasoline, kerosene and diesel fuel
• Automatic nozzle
• Comes with 12 ft of 3/4 inch UL grounded hose
•
•
•
•
•
HP-100-NUL DUAL-FLO®
PREMIUM HAND PUMP
M-1115-AU 115 V AC FUEL PUMP
• 115 V AC light duty aluminum gear pump for fuel with
automatic unleaded nozzle
• Up to 12 GPM (45 LPM)
• UL Listed
• CSA Certified pump and overload protected motor
• Includes 3/4 in x 12 ft. (3.7 m) hose (UL), and
adjustable suction pipe
• Battery Clamp Kit sold separately
GPI, MANUAL
UNLEADED
NOZZLE, 3/4” NPT
• Manual unleaded nozzle
• 3/4 inch NPT for M-150S,
M-240S and M-1115S Series
GPI, AUTOMATIC
UNLEADED NOZZLE,
3/4” NPT
•
•
•
•
UL listed
3/4 inch NPT
Straight spout
P.O.P. packaging for M-150S, M-180S,
M-240S and M-1115S Series
GREA
AT PLAINS
The HP-100 Dual-Flo® hand pump is a premium hand
pump for high volume fuel transfer. It delivers up to 50
gallons per 100 strokes, is lightweight and has corrosion
resistant aluminum construction.
• Use with gasoline, kerosene or diesel fuel
• Complete and ready to install
• Includes 3/4 in x 8 ft (2.4 m) Buna-N® hose,
thermoplastic nozzle and adjustable suction pipe
• UL Listed model available
UL Listed
50 PSIG / 3.4 bar
P.O.P. box 7.65 lb / 3.47 kg
5 to 30 GPM twist knob reset
MR-5-30-L6N mechanical fuel meter is calibrated in
litres with 3/4 inch NPT thread inlet/outlet
TOOLS AND EQUIPMENT
HP-90 DELUXE
ECONOMY HAND
PUMP
26
US FORGE Code: 900
Website: www.us-forge.com
WELDING ACCESSORIES
TOOLS AND EQUIPMENT
US Forge offers a large variety of welding accessories for all of your welding needs, including:
•
•
•
•
•
•
•
•
Electrode holders
Clamps
Magnets
Chipping hammers
Brushes
Marking tools
Cable accessories
Lugs
SAFETY
• US Forge deluxe welding goggles are made from lightweight, durable soft vinyl tha
that
he welder from any flashover
molds to the face to protect the
• US Forge’s comfortable, easy to use weldingg helmets are light
weight and impact resistant, and come withh a
le
#10 fixed shade, fully adjustable
head gear
• US Forge welding gloves
are designed to provide
complete protection from
molten metal
• US Forge deluxe lined
welding glove offers even more
pliability for long term dexterity
PART NO. DESCRIPTION
PART NO. DESCRIPTION
00200
Electrode Holder 250 – 300 amps
00204
Economy Ground Clamp 200 – 250 amps
00207
Multi-Purpose Magnet, Large
00300
Heavy Duty Chipping Hammer
00506
Flint Lighter Single
00802
Tip Cleaner
01174
Stainless Steel Tinning Brush 8-1/2”
00107
Safety Glasses #5 Shade
00109
Deluxe Cutting and Brazing Goggles
00110
Welding Helmet 2” x 4-1/4” Fixed Shade #10
00400
Welding Gloves Blue, Lined Leather
88100
Welding Helmet 2” x 4-1/4” Fixed Shade #10
Flip-Up
88124
Auto Darkening Helmet
99111
Full Face Grinding Shield, Clear
CHANNELLOCK Code: 674
Website: www.channellock.com
US FOR
RGE & CHANN
NELLOCK
THE CRIMPER™
• 9 1/2”
• Crimps insulated and non-insulated
solderless connections and terminals
• Cuts 10-22 AWG wire
WIRE STRIPPER
WIRING TOOL
OIL FILTER / PVC PLIER
• 6 1/4”
• For copper wire
• Cuts and strips 10, 12, 14, 15,
18, 20, 22 AWG wire and 0.80,
1.0, 1.3, 1.6, 2.0, 2.6 MM wire
• Precision ground cutters
• 8 1/4”
• Cuts and strips 10, 12, 14, 15, 18, 20, 22
AWG wire and 0.80, 1.0, 1.3, 1.6, 2.0,
2.6 MM wire
• Crimps insulated and non-insulated wire
• Cuts bolt sizes: 10-24, 6-32, 8-32, 10-32, 4-40
• Precision ground cutters
• 15”, 2 1/2” jaw, 6 adjustments
• Right angle, laser heat-treated teeth
grip better and last longer
• PermaLock® fastener eliminates nut
and bolt failure
NUTBUSTER PLIERS (T & G)
• Parrot nose design ideal for round surfaces
• Unique SAFE-T-STOP® feature prevents finger pinch
PART NO. DESCRIPTION
307
410
27
414
7", 0.45" jaw, 2 adjustments,
9 1/2", 1.12" jaw, 4 adjustments
14", 1.63" jaw, 6 adjustments
CUTTING PLIERS (LAP JOINT)
STRAIGHT JAW PLIERS (T & G)
• High leverage knife and anvil style cutting edge ensures perfectly mating and superior cutting edge life
• Fine polished, high carbon drop forged steel prevents
rust and provides superior performance
• Undercut tongue and groove with right angle, laserheat treated teeth grip for max bite and min wear
• PermaLock® fastener eliminates nut and bolt failure
PART NO. DESCRIPTION
338
8", 0.79" jaw, lap joint diagonal
447
7 3/4", 1.02" jaw, curved diagonal
PART NO. DESCRIPTION
430
10", 1.38" jaw
440
12", 1.50" jaw
460
16", 2.56" jaw
LEATHERMAN Code: 127
Website: www.leatherman.com | www.ledlenser.com
MULTI-TOOLS
(
SKELETOOL
MICRA
WAVE
• 7 tools in one
• Combo knife,
straight and serrated
• Carabiner clip
• Pocket clip
•
•
•
•
The Leatherman Wave multi-tool
is hands down our most popular
model, made famous by its outsideaccessible blades that can be
deployed with just one hand.
• Perfect for any job,
adventure, or everyday task
• 17 Tools in one
• Four outside accessible tools
• One-hand opening knife blades
• Bit drivers and bits
10 tools in one
Spring action scissors
Knife and screwdrivers
100% stainless steel
WINGMAN
SIDEKICK
• 14 tools in one
• Spring action pliers
and wire cutters
• Two outside accessible tools
• Removable pocket clip
• 15 tools in one
• Spring action pliers
and wire cutters
• Two outside accessible tools
• Includes leather sheeth
and carabiner
CHARGE ALX
SUPER TOOL 300
SURGE
•
•
•
•
•
• 19 tools in one, all ready
for your toughest jobs
• 4.5” professional tool
• Replaceable 154CM
hard wire cutters
• Rolled handle
edges for comfort
•
•
•
•
18 tools in one
6061-T6 hard-anodized handles
154CM Heavy Duty Knife
2 large bit drivers
Diamond coated file
TOOLS AND EQUIPMENT
21 tools in one
4.5” professional tool
Four outside accessible tools
Blade exchanger with
removable saw and file
LED FLASHLIGHTS
P7
TAC TORCH
P5
H7 HEAD LAMP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Advance Focus System
One hand focusing
175 lumens
3 levels of brightness
Advance Focus System
Water resistant housing
Designed for heavy duty work
100 lumens
Advance Focus System
One hand focusing
Small and lightweight
95 lumens
Advance Focus System
Lightweight, easy to wear
Swivelling light
155 lumens
28
LITE LADDERS Code: 467
Website: www.liteladders.com
TOOLS AND EQUIPMENT
EXTRA HEAVY DUTY
FIBERGLASS STEPLADDER
• CSA Grade 1, ANSI Type 1A, 300 lb load rating
• Heavy duty fiberglass rail construction is nonconductive
• 3” wide steps are slip resistant for confident climbing
• Multi-purpose copolymer top cap to keep your tools
close to the job
• Additional bracing for stability and strength
• Heavy duty internal spreaders for a secure stance
HEAVY DUTY FIBERGLASS
STEPLADDER
MEDIUM DUTY FIBERGLASS
STEPLADDER
•
•
•
•
•
•
•
•
CSA Grade 1, 250 lb load rating
Sturdy and electrically non-conductive side rails
3” wide steps are slip resistant for confident climbing
Multi-purpose copolymer top cap to keep your tools
close to the job
• Additional bracing for stability and strength
• Heavy duty pinch proof spreaders
provide a secure stance
PART NO. HEIGHT
PART NO. HEIGHT
LP-90497
4’
LP-60497
4’
LP-90597
5’
LP-60597
5’
LP-90697
6’
LP-60697
6’
LP-90797
7’
LP-60897
8’
LP-90897
8’
LP-91097
10’
LP-91297
12’
EXTRA HEAVY DUTY
FIBERGLASS EXTENSION
LADDER
•
•
•
•
•
•
CSA Grade 1, ANSI Type 1A, 300 lb load rating
Fiberglass rails are non-conductive
Rail to rung design offer strength and durability
Slip resistant D-shaped rungs
Spring loaded locks
Ice pick swivel feet
LITE LADDERS
29
16’
LP-9020
20’
LP-9024
24’
LP-9028
28’
LP-9032
32’
LP-9036
36’
LP-9040
40’
PART NO. HEIGHT
LP-30477
4’
LP-30577
5’
LP-30677
6’
LP-30877
8’
ARTICULATING LADDERS
TELESCOPIC LADDERS
• Bends to 10 or more useful positions
• Ideal for stairwells
• Easy to move and compact for storage
• CSA Grade 1, ANSI Type 1A, 300 lb load rating
• Multi-positional ladder is like having 4 ladders in 1
• Operates as a stepladder, extension ladder,
offset ladder and scaffold system
PART NO. HEIGHT
LP-816
8’/16’ CSA Grade 1, ANSI Type
1A, 300 lb with straight legs
LP-712FL
6’/12’ CSA Grade 1, 250 lb
with flared legs
LP-808
4’/8’ CSA Grade 2, 225 lb with
straight legs
PART NO. HEIGHT
LP-9016
CSA Grade 2, 225 lb load rating
Sturdy and electrically non-conductive side rails
Slip resistant serrated steps for confident climbing
Multi-purpose copolymer top cap to keep your tools
close to the job
• Pinch proof spreaders provide a secure stance
• Includes convenient utility tray
$
PART NO. HEIGHT
LP-821
9’ step, 19’ extension
LP-817
7’ step, 15’ extension
LP-713
5’ step, 11’ extension
LITE LADDERS Code: 467
Website: www.liteladders.com
SUPER HEAVY DUTY
ALUMINUM STEPLADDER
MEDIUM DUTY
ALUMINUM STEPLADDER
• CSA Grade 1, ANSI Type 1A, 300 lb load rating
• Double riveted, slip resistant steps
• Reinforced bracing on all steps and cross
braces for stability and strength
• Copolymer top cap
• CSA Grade 1, ANSI Type 1AA, 375 lb load rating
(4’ to 8’)
• CSA Grade 1, 250 lb load rating (10’ to 20’)
• Heavy duty, deep ribbed 3” steps for comfort
and safety
• Extensive bracing on all steps and cross braces for
increased strength and long term durability
• Includes utility tray
•
•
•
•
•
PART NO. HEIGHT
PART NO. HEIGHT
LP-704
4’
PART NO. HEIGHT
LP-705
5’
6’
LP-104
4’
LP-706
6’
8’
LP-105
5’
LP-707
7’
10’
LP-106
6’
LP-708
8’
LP-107
7’
LP-710
10’
LP-108
8’
LP-110
10’
LP-112
12’
LP-114
14’
LP-116
16’
LP-118
18’
LP-120
20’
LP-20477
4’
LP-20577
5’
LP-20677
LP-20877
LP-21077
CSA Grade 2, 225 lb load rating
Sturdy aluminum construction
Slip resistant serrated steps
Multi-purpose copolymer top cap
Includes utility tray
HEAVY DUTY ALUMINUM
STEPLADDER
SUPER HEAVY DUTY
ALUMINUM PLATFORM
EXTRA HEAVY DUTY ALUMINUM
EXTENSION LADDER
• CSA Grade 1, 250 lb load rating
• Double riveted, slip resistant steps
• Reinforced bracing on top and bottom steps
and cross braces for stability and strength
• Copolymer top cap
• Includes sturdy utility tray
• CSA Grade 1, ANSI Type 1AA, 375 lb load
rating (4’ to 8’)
• CSA Grade 1, 250 lb load rating (10’ to 20’)
• Heavy duty, deep ribbed 3” steps for comfort
and safety
• Extensive bracing on all steps and cross braces
for increased strength and long term durability
• Aluminum hand rails on all models
• Large 20” x 10” working platform
•
•
•
•
PART NO. HEIGHT
PART NO. HEIGHT
LP-5220
20’
LP-5224
24’
LP-5228
28’
6’
LP-5232
32’
LP-207
7’
LP-5236
36’
LP-208
8’
LP-5240
40’
LP-210
10’
LP-212
12’
LP-214
14’
LP-216
16’
LP-218
18’
LP-220
20’
LP-40577
5’
PART NO. HEIGHT
LP-40677
6’
LP-204
4’
LP-40877
8’
LP-206
LITE LADDERS
16’
4’
CSA Grade 1, ANSI Type 1A, 300 lb load rating
Slip resistant D-shaped rungs
Heavy duty aluminum side rails
Deluxe ice pick feet are self levelling
and slip resistant
LP-5216
LP-40477
TOOLS AND EQUIPMENT
EXTRA HEAVY DUTY
ALUMINUM STEPLADDER
30
IRWIN Code: 928
Website: www.irwin.com
CIRCULAR SAW BLADES
TOOLS AND EQUIPMENT
MARATHON MITRE
SAW BLADES
LEVELS
PART NO. DESC.
• #400 grit diamond ground teeth for a smooth finish
• Precision balanced, thin kerf for fast cuts and longer
motor life
MARATHON WITH WELDTEC
SAW BLADES
14080
12" x 40 T
14083
12" x 80 T
PART NO. DESC.
• Carbide teeth are welded NOT brazed
• Longest life and durability
• Every other tooth is ground thinner for fast cuts and
motor life
METAL CUTTING SAW BLADE
24035C
7 1/4" x 24
T - framing
and ripping
25130
Classic series
carbide saw
blade
2500E SERIES ELECTRONIC HEAVY
DUTY BOX BEAM LEVELS
• Electronic module with back lit LCD wide screen display
• Thick walled high grade aluminum frame, continuous edge
PART NO. DESCRIPTION
1801098
24" electronic box beam with case
1801099
48" electronic box beam with case
1500 SERIES I-BEAM LEVEL
• Constructed of durable aluminum and featuring
our patented Dual Chamber design
PART NO. DESC.
• Laser cut anti-vibration vents keep the blade cool for
smooth and accurate cuts
• Anti-kickback tooth shoulder reduces dust and sparks
for safer cuts
• Metal cutting grade carbide teeth, laser cut body
1779859
5 3/8" x 30 T
PART NO. DESCRIPTION
1765016
7 1/4" x 48 T
1794105
24" non magnetic I-beam
1765023
12" x 60 T
1794107
48" non magnetic I-beam
LINEAR EDGES
1000 SERIES I-BEAM LEVEL
• Rigid aluminum I-Beam construction
• Rotating angle vial
• Full length V-groove strip magnet
BI-METAL HOLE SAWS
LINEAR EDGE
• High speed steel cutting edge (electron beam weld)
for stronger, longer lasting teeth
• Bi-metal construction for toughness and long life
• Irwin reciprocating saw blades with Weldtec
PART NO. DESC.
PART NO. DESCRIPTION
372818P5
Metal cutting 8”, pack of 5
372624P5
Metal cutting 6”, pack of 5
373034BX
3/4"
373100BX
1"
372656P5
Nail embedded wood 6”,
pack of 5
373412BX
4 1/2"
372960P5
RECIP 9”, 10 TPI, pack of 5
WORKSITE PRODUCTS
SQUARES
TORPEDO LEVELS
IRWIN
31
KNEE PADS
PART NO. DESCRIPTION
• Provides protection and comfort
• Dual strap design for versatility
COMBINATION
SQUARES
1794153
250 series 9" magnetic heavy duty
1794155
150 series 9" magnetic
1794157
150T series 12" aluminum
magnetic toolbox level
1794159
50 series ABS 9" magnetic
level-counter display of 12
PART NO. DESCRIPTION
4033016
Ultra light kneepads
4033014
Hard shell kneepads
• Black precision etched scales
• Rust proof stainless steel blade
IRWIN Code: 928
Website: www.irwin.com
DRILL BITS, TAP & DIE SETS
UNIBIT STEP DRILL BITS
MASONRY DRILLING
PART NO. DESCRIPTION
10231
#1 UNIBIT 1/8” – 1/2” (1/32” steps) 13 holes 1/4” shank HSS
322001
10310
#10 UNIBIT 1/2” (single hole) HSS
322017
1/4” x 4 x 6 SDS plus
10231CB
#1 Cobalt UNIBIT 1/8” – 1/2” (1/32” steps) 13 holes 1/4” shank
326020
10502CB
3 pc set #1C, 2C and 3C Cobalt Set
5/8” x 8 x 12 masonry
rotary percussion
50516
Glass and tile masonry
drill bit
COBALT HSS FRACTIONAL
STRAIGHT SHANK JOBBER
LENGTH, 135º SPLIT POINT
PART NO. DESCRIPTION
63104
1/16” bulk
63106
3/32” bulk
3016010
5/32” carded
3016012
3/16” carded
5/32” x 2 x 4 SDS plus
29 PC
METAL INDEX
TURBOMAX HSS
FRACTIONAL KIT,
1/16”-1/2”
BY 64THS
HANSON EXTRACTORS
TURBOMAX HSS
FRACTIONAL STRAIGHT
SHANK JOBBER LENGTH
PART NO. DESCRIPTION
394100
Power grip, 7pc set
53226
10 pc hex head multi-spline kit
PART NO. DESCRIPTION
394001
5 pc bolt-grip base set, bolt extractors
SPEEDBOR
MAX 6 PC
KIT
73110
5/32” bulk
52490
9 pc spiral flute extractor set
• Used for wood boring
73116
1/4” bulk
73312
3/16” carded
73320
5/16” carded
BLACK AND GOLD FRACTIONAL
STRAIGHT SHANK JOBBER
LENGTH, 135º SPLIT POINT
PART NO. DESCRIPTION
3019008B
1/8” bulk
3019011B
11/64” bulk
3019016B
1/4” bulk
3019024B
3/8” bulk
TOOLS AND EQUIPMENT
PART NO. DESCRIPTION
HANSON TAPS AND DIES
PART NO. DESCRIPTION
24606
41 pc machine screw / fractional tap and
hex die set
97311
25 pc metric tap and hex die set
4935352
Performance threading system fractional
tap and die module
4935055
Performance threading system drive tool
module
RHINO 4200
• The professional
labelling tool for the
do-it-yourselfer
RHINO M1011
• Metal tape embosser
HANSON DEEP WELL
THREADCHASER
RHINO LABELS
RHINO 101
• RHINO replacement labels for printers
• Fast and affordable
way to create general
purpose or wire and
cable marking labels
PART NO. DESCRIPTION
18488
RHINO 1/2” x 11.5’ white flex nylon
3094101
5 pc SAE fine set
18482
RHINO 3/8” x 18’ white permanent poly
3094100
5 pc SAE course set
18444
RHINO 1/2” x 18’ white vinyl
3094102
10 pc SAE complete set
18058
RHINO 3/4” x 5’ yellow heat shrink tubes
3094104
4 pc metric set
IRWIN
PART NO. DESCRIPTION
32
IRWIN Code: 928
Website: www.irwin.com
TOOLS AND EQUIPMENT
FOLDING
UTILITY
KNIFE
BI-METAL
UTILITY
BLADES
9-IN-1
MULTI
TOOL
• Blue blade 5-pack
LOCK-N-LOAD QUICK
CHANGE EXTENSIONS
• Used for wood boring
PART NO. DESCRIPTION
4935704
1/4” x 6” extension
4935705
1/4” x 12” extension
4935652
3/8” x 6” extension
4935655
7/16” x 12” extension
RECORD VISE
LOCKING C-CLAMPS
WITH SWIVEL PADS
)
AVIATION
SNIPS
LUMBER
CRAYONS
• Aviation, offset,
utility and tinner
styles
• For use on oily, wet,
cold or dry surfaces
LOCKING C-CLAMPS
WITH REGULAR TIPS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
3
4”
22
18SP, 18”
21
18R, 18” original
4ZR
4 1/2”
20
11SP, 11”
19
11R, 11” original
5
5”
18
6SP, 6”
17
6R, 6” original
6
6”
19T
11R, 11” fast release
8ZR
8”
17T
6R, 6” fast release
TORSION
SCREWDRIVER
BITS
PART NO. DESCRIPTION
33
VISE GRIP
SPECIALTY TOOLS
PART NO. DESCRIPTION
27ZR
20R, locking chain
clamp 9”
12L3
12LC, large jaw
locking plier 12”
29
RR, locking pinch
off tool 7”
25ZR
9R, locking welding
clamp
'
STRAIT-LINE®
FLAGGING TAPES
ORIGINAL VISE GRIP
10-PC TRAY
• 150’ and 300’ flagging tape rolls
PART NO. DESCRIPTION
3052001B
Torsion Phillips power bit
#1 x 2” bulk
65602
Glo-orange 150’
65603
Glo-pink 150’
3052051B
Torsion square power bit
#2 x 4” bulk
65902
Orange 300’
3052046B
Torsion Phillips power bit
#2 x 6” bulk
65901
Red 300’
3053002B
Torsion Phillips insert bit
#2 X 1” bulk
IRWIN Code: 928
Website: www.irwin.com
PLIERS AND ADJUSTABLE WRENCHES
GROOVE JOINT PLIERS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
4935351
6” V-jaw
4935322
12” straight jaw
2078110
10” V-jaw
2078510
10” V-jaw
2078112
12” V-jaw
2078500
10” smooth jaw
4935097
10” smooth jaw
4935098
12” straight jaw
LONG NOSE
LOCKING PLIERS
STRAIGHT JAW
LOCKING PLIERS
PART NO. DESCRIPTION
CURVED JAW LOCKING PLIERS
WITH WIRE CUTTER
PART NO. DESCRIPTION
PART NO. DESCRIPTION
1502L3
9LN, 9” original
0502L3
10WR, 10” original
1402L3
6LN, 6” original
0702L3
7WR, 7” original
15T
9LN, 9” fast release
05T
10WR, 10” fast release
14T
6LN, 6” fast release
07T
7WR, 7” fast release
0102L3
10R, 10” original
0302L3
7R, 7” original
CURVED JAW LOCKING PLIERS
NEW AND IMPROVED
PART NO. DESCRIPTION
4935576
10CR, 10” original
(new improved jaw)
4935578
7CR, 7” original
(new improved jaw)
11T
10CR, fast release
13T
7 CR, fast release
(
1,000 VOLT
INSULATED PLIERS
BENT NOSE
PLIERS
LONG NOSE
PLIERS
SLIP JOINT
PLIERS
LINESMAN’S
PLIERS
TOOLS AND EQUIPMENT
GROOVE LOCK PLIERS
ADJUSTABLE
WRENCHES
SELF ADJUSTING
WIRE STRIPPER
PIPE
WRENCHES
PART NO. DESC.
PART NO. DESC.
2078608
8”
02
10LW
2078610
10”
08
4LW
2078612
12”
IRWIN
LOCKING
WRENCHES
34
MEGAPRO Code: 100
Website: www.megapro.net
Online Catalogue: www.megapro.net/assets/pdf/megaprocatalog.pdf
CUSHION GRIP RATCHETING DRIVERS
• Precision 28-tooth ZAD 8 Zinc Alloy SOLID-CORE™ ratchet that delivers over 225 inch-lbs of torque strength
TOOLS AND EQUIPMENT
13-IN-1 RATCHETING
13-IN-1 AUTOMOTIVE RATCHETING
• Features 12 standard 1" inch insert bits
• Shaft is made from Stainless Steel 303
HARD HANDLE DRIVERS
(ENGINEERED NYLON/ABS RESIN
TRIAX 1120)
• Patented retractable bit cartridge: Easily find,
change and store bits
• Palm Saver Cap™! No blisters in the palm of your hand!
• EZ Guide™ Collar! Greater control with
full contact between the bit and screw
• End of Shaft is a 1/4" hex nut driver
• Durable S2 steel industrial grade Double-End 2" bits
15-IN-1 TAMPERPROOF
15-IN-1 TAMPERPROOF 2
(
ORIGINAL 15-IN-1 NAS
15-IN-1 MEGALOK®
!
""!%+
14-IN-1 HVAC
15-IN-1 SHAFTLOK™
15-IN-1 ELEVATOR
""%
15-IN-1 HEX
15-IN-1 STAINLESS
15-IN-1 ELECTRONIC
*+
'%
!
14-IN-1 AUTOMOTIVE
15-IN-1 PL ROBERTSON
(SQUARE)
15-IN-1 RV/MH
RECREATIONAL VEHICLE
,
• Loaded with the most popular bits used in automotive
work, including a 1/4" socket adapter
COMPACT 7-IN-1 STAINLESS STEEL DRIVERS
• Ratcheting, standard and stubby
• Strong magnetic pickup
• Durable S2 steel industrial grade 1" insert bits
MEGAPRO
%
%
7-IN-1 COMPACT RATCHETING
7-IN-1 COMPACT STANDARD
7-IN-1 COMPACT STUBBY
• 3 position ratchet
35
MEGAPRO Code: 100
Website: www.megapro.net
Online Catalogue: www.megapro.net/assets/pdf/megaprocatalog.pdf
PART NO.
DESCRIPTION
FD4-6-C
Flat (Slot) Bit 4-6 Carded
PD0-3-C
Phillips Bit 0-3 Carded
PD1-2-C
Phillips Bit 1-2 Carded
SD0-3-C
Square (Robertson) Bit 0-3 Carded
SD1-2-C
Square (Robertson) Bit 1-2 Carded
• S2 MODIFIED STEEL
TDT10-15-C
Star (Torx) Pin Bit 10-15 Carded
• ROCKWELL 60+/-2
STD6-8-C
Spanner Bit 6-8 Carded
• COMPACT PACKAGING 15/16”X 4 3/8”
STD10-12-C
Spanner Bit 10-12 Carded
9BP-ENPD-3A
Standard/SS/DoubleLok ENP Bit Pack F2D4-6S, P2D1-2S, S2D1-2S
• INDUSTRIAL GRADE
$
Standard/SS/DoubleLok ENP Bit Pack P2D0-3S, S2D0-3S
9BP-ENPD-2B
Standard/SS/DoubleLok ENP Bit Pack T2D10-15S, T2D20-25S
9BP-ENPD-3F
Standard/SS/DoubleLok ENP Bit Pack Bit Pack Square/Phillips 3 x S2D2-2S
9BP-ENPD-3G
Standard/SS/DoubleLok ENP Bit Pack Double End Phillips 3 x P2-S2/DL ENP
9BP-ENPD-3K
Standard/SS/DoubleLok ENP Bit Pack Double End Square 3 x P2D2-2S
9BP-TP-3A
Tamperproof Bit Pack STD6-8, STD10-12, TDT10-15
9BP-TP-2A
Tamperproof Bit Pack TDT20-25, TDT27-30
9BP-TP-2B
Tamperproof Bit Pack HDT1/8-9/64, HDT5/32-3/16
9BP-TP-1A
STD14, #14 Spanner Bit
9BP-HX-3A
Hex Bit Pack HD2.00-3.00, HD4.00-5.00, HD5.50-6.00
9BP-HX-2A
Hex Bit Pack HD3/32-7/64, HD1/8-9/64
9BP-HX-2B
Hex Bit Pack HD5/32-3/16, HD7/32-1/4
9BP-AH-3A
Automotive Bit Pack TD9-40, F5.5-VSTD, 6SA1/4
9BP-CG-2A
Ratchet Bit Pack FD2-4, FD3-5
9BP-CG-2B
Ratchet Bit Pack 6HND3/16, 6TSS5.3X4.0X50
9BP-SL-3A
ShaftLok Bit Pack F4D4-6, P4D1-2, S4D1-2
9BP-SL-2A
ShaftLok Bit Pack P4D0-3, S4D0-3
9BP-SL-2B
ShaftLok Bit Pack T4D10-15, T4D20-25
STANDARD/SS/
DOUBLELOK
"(
TAMPERPROOF
BIT PACK
HEX BIT
PACK
,
AUTOMOTIVE
BIT PACK
RATCHET
BIT PACK
&
SHAFTLOK
BIT PACK
MEGAPRO
SPANNER
BIT
9BP-ENPD-2A
TOOLS AND EQUIPMENT
MOST POPULAR
REPLACEMENT
BITS IN INDIVIDUAL
CARDS AND COMBO
PACKS
36
AMS AUTOMOTIVE/RHINO PAC Code: 103
Website: www.amsautomotive.com
UNIVERSAL LIFT SUPPORTS
TOOLS AND EQUIPMENT
AM
MS AUTO
OMOTIVE / RH
HINO PAK
37
ROD END
TYPE A - 10 MM BALL SOCKET
ROD END
TYPE B - BLADE
• Fast Growing Service Opportunity!
• Multi-purpose applications include:
CAMPER SHELL WINDOWS, GOLF CARTS, RV-CANOPIES, AWNINGS,
STORAGE DOORS, TOOL BOX LIDS, MARINE HATCHES, FARM
MACHINERY, STORAGE CONTAINERS, GRILLS/SMOKERS, AND
TONNEAU COVERS
ROD END
TYPE C - 13 MM BALL SOCKET
• Assortments for both universal and vehicle specific applications are available
• Three factors are needed to determine the correct universal lift support: extended
length, working pressure and rod end type
• AMS catalogs over 90 different universal lift supports that range from 7 - 35 inches
extended length, 20 to 149 pounds force, and three types of end connections
• Individual brackets, ball and shoulder stud kits are available
• Listed are examples of universal lift supports available
PART NO. DESCRIPTION
4055
7.5" extend, 45 lbs, end type AA
4057
10" extend, 25 lbs, end type AA
4488
12" extend, 60 lbs, end type AA
4530
20" extend, 115 lbs, end type AA
4037
10" extend, 60 lbs, end type BB
4040
12" extend, 40 lbs, end type AA
4043
14" extend, 25 lbs, end type AA
6943
28" extend, 115 lbs, end type CC
4420
12" extend, 30 lbs, end type AA
4418
17” extend, 35 lbs, end type AA
4419
14” extend, 35 lbs, end type AA
Visit AMS Lift Support Catalog on line at www.amsautomotive.com, select “Lift Supports” then “Lift Support Catalog” use the page button to
find page 40 for general information, page 41 for Universal Lift Support Specifications.
First, find the Group with the correct length range, second, choose a force range that meets your needs and then select the part number that has
the same Rod End Type.
*Note: Page 40 of the on-line catalog provides information about cylinder pressure which is stamped on the outer tube.
Need Help? Call: AMS Tech Support 1-800-528-6743.
UNIVERSAL BRACKETS
BALL STUD KITS
SHOULDER
STUD KIT
PART NO. DESC.
SA3000
10 mm
SA3001
13 mm
• Shoulder stud kits
include nuts and
washers
SA3100
SA3101
SA3102
AMS AUTOMOTIVE/RHINO PAC Code: 103
Website: www.amsautomotive.com
CLUTCH KITS
MEDIUM AND HEAVY DUTY TRUCK, CLASS 6-8
EZ-PEDAL STYLE “MAGNUM 2250”
CLUTCH KITS AND COMPONENTS MEDIUM
AND HEAVY DUTY TRUCKS, CLASS 6-8
• Clutch Kit Options: EZ-Pedal / Angle-Ring / Angle-Spring
• Related Parts: Flywheels, Release & Pilot Bearings, Master & Slave Cylinders, Clutch Brakes,
Cross Shafts & Bushings, Clutch Forks, Lube Tubes, Installation Kits and Alignment Tools
• Kits and Related Parts available for: Cummins, Detroit, Ford, GM, Mack,
Navistar/International and Volvo Trucks
INDUSTRY LEADING TORQUE CAPACITY!
• For Off-Highway and Heavy Loads! Dyno tested at over 2,250 ft lbs
of torque
• 15.5” x 2” EZ Pedal, 2250 lbs torque, ceramic 6-paddle, 2-plate
CLUTCH BRAKE
CUMMINS FLYWHEEL
• For VN/NHD Volvo Heavy Duty Trucks
• 2-Piece Hinged 0.045 Thick, 2.58”-2.66” O.D.
• Cummins 8.3 L, C Series
(
BELL HOUSING INSPECTION
COVER KIT WITH 6” TUBE
CLUTCH RELEASE BEARING
INSTALLATION KIT
• 1965-96 International DT360, T444, 7.3 L, 9.0 L
• For Eaton® and Fuller® RT Series Transmissions
AM
MS AUTTOMOTIVE / RH
HINO PAK
CLUTCH MASTER CYLINDER
TOOLS AND EQUIPMENT
38
BERNZOMATIC
Code: 375
Website: www.bernzomatic.com
TOOLS AND EQUIPMENT
BZMG9
BZOX9
BZTX9
TX916
BernzOmatic 14.1 oz
MAP-Pro™ premium
fuel cylinder
BernzOmatic
1.4 oz disposable
oxygen cylinder
BernzOmatic 14.1 oz
propane fuel cylinder
Camping fuel 16.4 oz,
propane
BZTS1500KC
BZTS3000KC
BZPK1001KC
BZUL100
2 piece self igniting
torch kit
2 piece resin handle
self igniting torch kit
5 piece plumber’s kit
2 piece pencil
flame torch kit
BZUL125
7 piece pencil flame torch kit
ST2200T
ST200T
ST250K
BF55
Trigger start
micro torch
Refillable precision
needle point flame
torch with 3-in-1 tip
Micro Torch kit
Bernzomatic
5.5 oz disposable
butane cylinder
BZOX2550KCSM
Cutting, welding, and brazing torch kit
TORCH HEADS
PART NO. DESCRIPTION
BZTS4000ZKC
2 piece trigger start
torch kit
BZ8250HTKC
BZ8250HT
3 piece premium
trigger start hose torch kit
Premium trigger start hose
torch with fuel holster
329207
UL2317, Basic pencil
flame torch, propane
328623
TS1500T, Self igniting
torch, propane
328856
TS3000T, Trigger start
torch, propane
328624
TS4000T, Trigger start
torch, MAP-Pro™
propane fuel
328625
TS7000T, Trigger start
torch, adjustable flame,
MAP-Pro™ propane
fuel
328626
TS8000BT, High
intensity trigger
start torch, adjustable
flame, MAP-Pro™
propane fuel
328640
TS99T, Trigger start
swivel torch, adjustable
flame, MAP-Pro™
propane fuel
SOLDER AND ACCESSORIES
PART NO. DESCRIPTION
BERN
NZOMATIC
39
328632
TX405C, Spark lighter and flints
328633
TX406C, Replacement flints
327798
S4N1B, 4-in-1 Brush
327793
SRC300, 3 oz electrical solder
327795
SWSF100, 1 oz water-soluble flux and brush
327787
SC2YD, Sand cloth, 2 yd
327823
HC9X12, Heat cloth
THE BONE™ Code: 730
Website: www.bonecreeper.com
THE BONE-STER™ MECHANICS CREEPER
•
•
•
•
•
Practically indestructible
Handles make it easy to carry
Ribs add welcome ventilation
400 lb capacity
Same polypropylene copolymer as
the Bone™
• Impervious to most solvents
• Easy to clean
• Unique evolutionary design
THE ORIGINAL BONE™ MECHANICS CREEPER
THE ROUGH RIDER™ MECHANICS CREEPER
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Rolls over drop light cords, cracks, grates, etc.
Made in the USA
5 1/8” diameter 1” wide castors
Custom designed wheels with soft, grippy TPE tires
130 lb rating per wheel
1-3/4” ground clearance, one of the lowest
creepers on the market, next to the Bone-ster!
Four 5/16” bolts fasten plate – won’t break
Winged design adds style to function
High strength polypropylene copolymer
Extremely comfortable
300 lb capacity
Impervious to most solvents
Dirt wipes right off!
Won’t tip, flip, or pinch
•
•
•
•
•
•
•
•
•
Rolls over drop light cords, cracks, grates, etc.
5 1/4” diameter 1 3/8” wide casters
Made in the USA
Custom wheels with soft, grippy and
treaded TPE tires
250 lb rating per wheel
2 7/8” ground clearance
4 5/16” bolts fasten through a plate – won’t break
Outboard wheels won’t tip or flip
High strength polypropylene copolymer
Extremely comfortable
400 lb capacity
Impervious to most solvents
Dirt wipes right off!
TOOLS AND EQUIPMENT
• Rolls over many shop/garage
obstacles
• Made in the USA
• 3” diameter, 7/8” wide casters
• Wheels designed purely for the
Bone-ster
• Soft, grippy TPE tires
• Strong thick 11 gauge plate with
4 1/4” thru-bolts
• 1-1/2” ground clearance
THE TAIL BONE™ ROUGH RIDER MECHANICS SEAT
• Rolls over drop light cords, cracks,
grates, etc.
• Made in the USA
• 5 1/8” diameter 1” wide wheels
• Custom designed wheels with soft,
grippy TPE tires
• 130 lb rating per wheel
• 3/4” ground clearance
• Four 5/16” bolts fasten plate –
won’t break
• Rolls over drop light cords, cracks,
grates, etc.
• Made in the USA
• 5.25” diameter 1 3/8” wide wheels –
ideal for outdoor use!
• Custom designed wheels with soft,
grippy TPE tires
• 250 lb rating per wheel
• 1.75” ground clearance
• Winged design adds style to function
• High strength polypropylene
copolymer
• Seat is only 12” off the ground,
perfect for a wide variety of jobs!
• 350 lb capacity
• Impervious to most solvents
• Dirt wipes right off!
• Four 5/16” bolts fasten plate –
won’t break
• Winged design adds style to function
• High strength polypropylene copolymer
• Seat is only 13” off the ground, perfect
for a wide variety of jobs!
• 350 lb capacity
• Impervious to most solvents
• Dirt wipes right off!
THE BONE
THE TAIL BONE™ MECHANICS SEAT
40
ASSOCIATED Code: 702
Website & Online Catalogue: www.associatedequip.com
TOOLS AND EQUIPMENT
"
"
12/24 V, 70/35 A, 200 A
BOOST WHEEL SMART
CHARGER AND 70 A
POWER SUPPLY
12 V, 60/70 A, 270 A
BOOST WHEEL
SMART CHARGER
AND POWER SUPPLY
• Versatile, for standard automotive, deep-cycle,
AGM and GEL Cell Batteries
• 12/24 V, 70/35 A, 200 A Boost
• Nominal 13.7 V DC output
• Program for deep discharge recovery
of flooded batteries
• Charges all types of 12/24 V batteries
• Dead battery override control
• DC Leads: 6 1/2’ 4 AWG
• Clamp Rating: 500 A
• Safe in any weather operation
• CSA Listed
• 15 A Memory Saver Port for standard automotive,
deep-cycle, AGM and GEL Cell Batteries
• 60 A / 70 A in power supply mode
• Nominal 13.7 V DC output
• 15 A continuous / 20 A peak memory saver port
• Patented diagnostics indicate weak or defective
batteries
• Program for deep discharge recovery of flooded
batteries
• Dead battery override control
• Clamp Rating: 400 A
• Safe in any weather operation
6/12/18/24 V – HEAVY DUTY
FLEET BATTERY CHARGER
6/12/24 V – HEAVY DUTY
FAST CHARGER
The highest performance fleet charger on the
market has 80 A continuous charge with 400 A
crank assist at 12 V. UL and CSA listed for indoor
and outdoor use.
This heavy duty fleet charger rejuvenates all
standard and maintenance-free 6 V, 12 V and 24 V
batteries with five charging positions. Fleet charging power with a cranking assist rating higher than
any other charger in its classification. UL and CSA
listed for indoor and outdoor use.
•
•
•
•
ASS
SOCIATED
41
UL Continuous Rating: 100/80/50/40 A
Mfg Boost Rating: 725 A
UL Cranking Assist Rating: 400 A
Clamp Rating: 500 A
•
•
•
•
UL Continuous Rating: 70/65/30 A
Mfg Boost Rating: 600 A
UL Cranking Assist Rating: 280 A
Clamp Rating: 500 A
12 V MICRO-PROCESSOR
CONTROLLED AND FULLY
AUTOMATIC
6/12 V – PROFESSIONAL
FAST CHARGER
Automatic charging for sealed, GEL Cell and
AGM Batteries. ESS™ (Electrical Stability System)
Technology converts charger into 12 V power
supply for extended service procedures or flash
reprogramming. Identifies deeply discharged or
sulfated batteries and activates recovery mode.
Patented diagnostics detect low capacity battery.
•
•
•
•
UL / CSA listed: Safe in any weather
UL Continuous Rating: 40 A
UL Cranking Assist Rating: 130 A
Clamp Rating: 400 A
The 6012 charger has a high cranking assist of 250
A to better start vehicle and offers a UL continuous
rate of 70/60/30 A for peak performance. Features
a timer and 400 A fully insulated clamps on twin
extruded DC leads for tangle-free operation. UL and
CSA listed for indoor and outdoor use.
•
•
•
•
UL Continuous Rating: 70/60 A
Mfg Boost Rating: 500 A
UL Cranking Assist Rating: 250 A
Clamp Rating: 400 A
ASSOCIATED Code: 702
Website & Online Catalogue: www.associatedequip.com
12 V INTELLAMATIC
PRO SERIES III
BATTERY CHARGER
KWIKSTART 650
RECHARGEABLE 12 V DC
POWER SUPPLY
Model 9425 evaluates and applies
appropriate profile for optimum charge.
Patented diagnostics indicate weak or
defective battery; ESS™ Technology turns
the 9425 into a stable power supply for
extended service procedures or re-flashes.
Voltage controlled charging, suitable for
flooded and sealed batteries.
• UL/CSA listed: Safe in any weather
• UL or CSA Continuous Rating: 20 A
• Clamp Rating: 300 A
The 12 V DC power supply is equipped with a 12 V
DC battery ideal for jump-starting cars, trucks, boats,
RV’s and tractors. The patented clamp on bars make
it easy for stowing clamps when not in use. No more
lost or broken chargers!
• DC Voltage: 12 V
• Peak Amps: 1650 A
• Cold Cranking Amps: 360 A
• Battery Power: 12 V/22 AH
• Booster Cables: 32”: 4 AWG
*
*
US 18-6/12 VOLT
6/12 V, 40/40/10 A,
330 A MANUFACTURER’S
BOOST WHEEL CHARGER
WITH 90 MINUTE TIMER
Introducing our newest made in the USA value leader!
This 40 A charger appeals to the small shop technician and
the DIY user. CSA listed for USA and Canada.
Convenient handle for moving from bay to bay. “Safe in all
weather” operation. Safety, quality and value in our most
competitively priced wheel charger.
• UL Continuous Rating: 40/40/10 A
• MFR. Boost Rating: 330 A
• UL Cranking Assist Rating: 200 A
• AC Cord: 6’ 16/3
• DC Leads: 6’ 6-1/2 AWG
• Clamp Rating: 400 A
• Transformer/Rectifier Limited Warranty: 2 Years
• Shipping Dimensions (HxWxD): 24” x 15” x 13.5”
• Weight: 35 LBS
Our newest made in the USA value leader!
• 40 A continuous rating at 6/12 V
• 200 A crank assist with full 330 A
manufacturer’s boost rating
• 90 minute timer with hold
• 6.5’, 6.5 AWG cable, 400 A clamps
• Safe In any weather operation
• CSA Listed
KWIKSTART
RECHARGEABLE
12/24 V POWER
SUPPLY
DIGITAL HAND HELD
BATTERY LOAD TESTER
12 V HAND
HELD BATTERY
LOAD TESTER
Full 125 A load test 6 V and
12 V batteries, alternators
and starters on all types of
vehicles. Features heavy duty
insulated safety clamps with
300 A jaws and side terminal
adapters
•
•
•
•
Load: 125 A
Voltmeter: 0-16 Volts DC
Leads: 2’ 14/2
Clamp Rating: 300 A
ASS
SOCIATED
The 12 V DC power supply
is equipped with two 12 V
22A hour DC High
Performance Batteries.
Ideal for jump-starting cars,
trucks, boats, RV’s and tractors. Unit has a 3 position
switch for 12 V, OFF, or 25 V settings. The patented
clamp on bars make it easy for stowing clamps
when not in use.
• DC Voltage: 12/24 V
• Peak Amps: 3,500/1750 A
• Cold Cranking Amps: 720/360 A
• Battery Power: 12 V/44 AH, 24 V/22 ah
• Booster Cables: 66”: 2 AWG
Digital 125 A load
tester that computes
the CCA of the battery.
Test displays the
current voltage as
well as maximum and
minimum voltages
allowing the tester to
be used for various diagnostic tests. This tester also
incorporates Kelvin connections in the 300 A insulated
heavy duty clamps for improved accuracy.
• Load: 125 A
• Voltmeter: 7-19 Volts DC
• Leads: 2’ 14/3
• Clamp Rating: 300 A
TOOLS AND EQUIPMENT
42
GEARWRENCH Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.gearwrench.com/catalog.jsp
TOOLS AND EQUIPMENT
GEARWRENCH® RATCHETS
PART NO. DRIVE RATCHET STYLE
DESCRIPTION
81011D
1/4"
Full Polish Ratchet
• Available in teardrop head, flex head, stubby and offset
• Drive availability: 1/4”, 3/8” and 1/2”
• 60 tooth low profile ratchet
81400
3/4”
Quick-Release Teardrop Ratchet
• 45 tooth standard ratchet (1/4”, 3/8” and 1/2” drives)
• 24 tooth standard ratchet (3/4” drive)
81208
3/8”
Cushion Grip Ratchet
• Flush mounted lever; dual material cushion grip
• Available in 1/4”, 3/8” and 1/2” drives
• 60 tooth low profile ratchet
81225
3/8”
Cushion Grip Roto Ratchet
GEARWRENCH® SOCKETS
AND BIT SOCKETS
• Double line (SAE) and knurled line (MM) to
easily identify standard vs. metric sockets
• Available in sets and open stock
• Head rotates 180 degrees
• Less than 5 degree swing arc for greater access
• Available in 1/4” and 3/8” drives
PART NO. RANGE SIZE RANGE
DESC.
80104D – 80114D
5/32” – 9/16”
1/4" drive, 6 PT
80350 – 80362
1/4” – 1”
3/8” drive, 6 PT
80602 – 80613,
80677 – 80679
7/16” – 1-1/2”
1/2" drive, 6 PT
7/8” – 2-3/8”
3/4” drive, 12 PT
80830 – 80831, 80833 –
80835D, 80838 – 80841,
80852, 80854 – 80857,
80859 – 80865
GEARWRENCH®
IMPACT
SOCKETS
• Chrome Molyebdenum
alloy steel (CR-MO)
for exceptional strength
and long lasting durability
• Available in sets and
open stock
GEAR
RWRENCH
43
PART NO. RANGE SIZE RANGE
DESCRIPTION
84100 – 84109
3/16” – 9/16”
1/4" drive, standard
84300 – 84307
5/16” – 3/4"
3/8” drive, standard
84397 – 84403
3/16” – 1/2"
3/8” drive, hex
84500D – 84518D
3/8” – 1-1/2”
1/2" drive, standard
84634 – 84640
3/8” – 3/4”
1/2" drive, hex
84800 – 84816,
84818 – 84828
3/4" – 2-1/2”
3/4" drive, standard
.//01245/67828"
..15A878016:N6:5/426:G4:6<87/:2M8D@880:2;865
8<6/=/86://26<876O8@*:6<87/715A878<6/=/86:%>9
%
>:2%>26<87
.//01245/67828"97:22
..":2;865:28<6/=/8
6:%>9%
>?%>26<87@15A878/71<6/=/86:
2880:2B8D7E/8797F8//77F6<8/;G:86570A
0/4G7@615A878<6/=/86:%>9%
>:2%>
26<87@827E/876:5/428H1DJ;0811K91DJ
877$69:8:/1DJ9"D8:/1DJ960/8L489
17626<J9//8D98DG1:9/182:2M6//607
GEARWRENCH®
RATCHETING WRENCHES
Ratcheting Wrenches: X-Beam™
allows you to apply force to the flat side
of the wrench, reducing hand fatigue
*THE FOLLOWING RATCHETING WRENCH STYLES ARE ALSO AVAILABLE IN
SAE AND METRIC:
Q,,8;R1;=6:61:
Q,1;=6:61:
Q,15A6:G$/8D1;=6:61:
Q8<876=/81;=6:61:
Q:28D6:G1;=6:61:
Q,,8;R$/8D1;=6:61:
QS+6G6:/>1;=6:61:
Q,&8=1DR14=/81D
Q4==E$/8D1;=6:61:
Q4==E1;=6:61:
Q$/8D1;=6:61:
Q+08:":2
Q14=/81D
PART NO. RANGE
SIZE RANGE
DESCRIPTION
85360 – 85374
85308 – 85319D
5/16” – 3/4"
8 mm – 19 mm
XL X-Beam™
reversible combination
85201 – 85203, 85211 – 85214
5/16” – 1”
8 mm – 22 mm, 24 mm
Quadbox™
9841D – 9844
9851D – 9855D
3/8” – 7/8”
10 mm – 19 mm, 22 mm
Half moon reversible
double box
85326, 85334, 85342, 85352
3/8” – 7/8”
85222 – 85232 (even #’s), 85241D 10 mm – 19 mm, 22 mm
S-shaped reversible
double box
9220D – 9223
E6xE8, E10xE12,
E14xE18, E20xE24
E-Torx® double box
85548 – 85564 (even #’s)
#8 x 1/4” – #24 x 3/4”
XL spline combination
GEARWRENCH Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.gearwrench.com/catalog.jsp
GEARWRENCH®
NON-RATCHETING WRENCHES
.M8K1//1F6:G(1:5M86:G8:5M7E/878/71<6/=/86:":2865H
PART NO. RANGE
•
•
•
•
•
81714 – 81725
81698 – 81713
5/16” – 3/4"
8 mm – 19 mm
XL X-Beam™ combination
81768 – 81781
81754 – 81767
1/4” – 1”
6 mm – 19 mm
6 PT full polish combination
81890 – 81893
6”, 8”, 10” and 12”
Adjustable cushion grip
Long Pattern Combination
Flex Flare Nut
Full Polish Open End
Stubby Combination
Crowfoot Drive (3/8”Dr.)
•
•
•
•
Chrome Adjustable (SAE only)
Flare Nut
30 Degree Deep Offset Box
Black Adjustable (SAE only)
SIZE RANGE
DESC.
GEARWRENCH® TORQUE WRENCHES
PART NO. TORQUE RANGE
DRIVE TORQUE WRENCH
DESCRIPTION
85072
85070
85071
12-120 in/lb
10-100 ft/lb
25-250 ft/lb
1/4”
3/8”
1/2”
Electronic
Torque accuracy +/- 2% CW, +/- 3% CCW from 20 to 100% full scale
85073
85074
10-100 in/lb
25-250 in/lb
3/8”
1/2”
Electronic Flex Head with Angle
Thin profile, high-strength teardrop head flexes for easier access and features
a 60-tooth gear with 6º ratcheting arc
85050
85051
85052
85053
85054
85055
30-200 in/lb
25-250 in/lb
10-100 ft/lb
20-150 ft/lb
20-250 ft/lb
100-600 ft/lb
1/4”
3/8”
3/8”
1/2”
1/2”
3/4”
Micrometer
Accurate in clockwise direction +/- 3% in upper 80% of the range
85056
85057
5-75 ft/lb
25-250 ft/lb
3/8”
1/2”
Flex Head Micrometer
Sealed tear-drop head provides access and strength, and keeps out contaminants
GEARWRENCH®
INDEXING PRY BARS
• Available in fixed handle and
extendable handle
PART NO.
SIZE
82208
8”, indexing
82210
10”, indexing
82216
16”, indexing
82224
24”, indexing
82233
33”, indexing
82220
18” – 29”, extendable
82248
29” – 48”, extendable
TOOLS AND EQUIPMENT
NON RATCHETING WRENCHES: Surface Drive Plus™ provides stronger grip
on fasteners; reduces fastener rounding; and, delivers up to 25% more torque.
GEARWRENCH® CUTTING TOOLS
• GearWrench® offers a range of cutting tools and files,
including a high tension hacksaw, a folding utility knife,
aviation snips, cable cutters and standard and mini files
PART NO.
SIZE
82842
3 Pc. Aviation Snip Set. Includes Part No.:
82840, straight cutting aviation snips
82841, right cutting aviation snips
82842, left cutting aviation snips
82820
4 Pc. Standard File Set. Includes Part No.:
82822, 8” flat file
82823, 8” round file
82824, 8” half round file
82825, 8” triangle file
44
GEARWRENCH Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.gearwrench.com/catalog.jsp
GEARWRENCH® PLIERS
TOOLS AND EQUIPMENT
• GearWrench® pliers include dual
material grip pliers, Double-X™ pliers,
insulated pliers, and locking pliers
PART NO.
DESCRIPTION
82108
7 Pc. Mixed Plier Set. Includes Part No.:
82011, tongue and groove
82012, diagonal cutting
82013, long nose
82014, slip joint
82020, 12” groove joint with straight jaw
82025, 8” linesman
82028, 8” end nipper
82111
2 Pc. Double-X™ Hemostat Plier. Includes Part No.:
82034, Double-X™ straight hemostat pliers
82035, Double-X™ 45 degree hemostat pliers
82030
8” Long Nose, Insulated Pliers
82102
3 Pc. Locking Plier Set. Includes Part No.:
82043, 6” long nose
82040, 5” curved jaw
82041, 10” curved jaw
GEARWRENCH® SCREWDRIVERS
AND NUT DRIVERS
GEARWRENCH® STRIKING TOOLS
PART NO.
DESCRIPTION
• GearWrench® has continued its line expansion, with the addition of striking
and struck tools
• Hammers available include ball pein, curved claw, drilling, dead blow,
engineers, and blacksmiths
• Chisels and punches are also available
80061
4 Pc. Posidriv® dual material screwdriver set
• GearWrench® now offers dual material, solid handle, cushion grip and insulated
screwdrivers as well as full hollow shaft cushion grip and insulated nutdrivers
82733
6 Pc. Phillips solid handle screwdriver set
82770
6 Pc. cushion grip screwdriver set
82901
8 Pc. SAE insulated nut driver set
GEAR
RWRENCH
45
PART NO.
DESCRIPTION
82303D
5 Pc. Hammer Set includes Part No.:
82251, 16 oz ball pein hammer, fiberglass
82255, 12 oz soft face hammer, removable caps
82260, 3 lb drilling hammer
82256, 16 oz dead blow hammer, composite handle
82259, 16 oz rubber mallet, wood hickory handle
82306
27 Pc. Punch and Chisel Set Includes Part No.:
82261 – 82268, cold chisels: 1/4” – 1”
82269 – 82271, center punches: 1/4” – 7/16”
82272 – 82277, pin punches: 3/32” – 5/16”
82278 – 82281, long taper punches: 1/8” – 1/4”
82282 – 82287, starter punches: 5/32” – 3/8”
ARMSTRONG Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.armstrongtools.com
ARMSTRONG® HAND SOCKETS,
DRIVE TOOLS AND SOCKET SETS
PART NO.
DESCRIPTION
12-973
1/2” drive long handle teardrop ratchet
12-220
1/2” drive 6 pt deep socket 5/8”
10-010
1/4” drive 6 pt standard socket 5/16”
13-947
3/4” drive universal joint
• Impact socket sets 1/4” to 3/4” drive
• Impact sockets 1/4” to 2-1/2” drive
• SAE impact sockets - openings range from 3/16” (18-606: 1/4” Dr. 6 pt std)
to 7-5/8” (24-244: 2-1/2” Dr. 6pt std)
• Metric impact sockets – openings range from 4mm (45-004: 1/4”
Dr. 6 pt std) to 65mm (49-065: 1” Dr. 6pt std)
• Impact accessories 3/8” to 2-1/2” drive
• Impact hex bit sockets 3/4” drive
• Power sockets 1/4” to 1/2” drive
• No.5 Spline drive sockets
PART NO.
DESCRIPTION
20-893
11 pc 6 pt 1/2” drive impact socket set
19-922
3/8” drive impact extension 3”
22-947
1” drive universal joint
..<6/=/86:108:715A:2715A8787
ARMSTRONG® TORQUE TOOLS
• Torque wrenches: electronic, micrometer adjustable, flex head micrometer
adjustable, dial and deflecting beam
• Torque screwdrivers
• Torque multipliers
• Electronic torque testers
• Torque wrench replacement heads and adapters
INDUSTRIAL WRENCHES AND SETS
• Part #64-046 - 3/8”drive micrometer adjustable torque wrench, ratchet head
TOOLS AND EQUIPMENT
• Chrome Sockets 1/4” to 1” drive**
• SAE sockets – openings range from 1/8” (10-004: 1/4” Dr. 6 pt std)
to 3-1/2” (14-212: 1” Dr. 12pt std)
• Metric sockets – openings range from 4 mm (37-004: 1/4”
Dr. 6 pt std) to 60 mm (40-360: 3/4” Dr. 12 pt deep)
• Black oxide sockets 3/8” to 1/2” drive**
• Ratchets and drive tools 1/4” to 1-1/2” drive
• Hex driver and screwdriver sockets 1/4” to 1/2” drive**
• Crowfoot wrenches 3/8” to 1/2” drive**
ARMSTRONG® IMPACT
AND POWER SOCKETS,
ACCESSORIES AND SETS
• Combination wrenches: 1/4”–
• Striking wrenches: 1-1/16”– 3-1/8”,
2-3/4”, 4 mm – 70 mm openings
32 mm – 80 mm openings
• Structural and construction
• Slugging wrenches: 1-1/4” – 6”,
wrenches: 5/8” – 2” openings
• 32 mm – 80 mm openings
• Spanner wrenches: 1”– 6” openings
OTHER INDUSTRIAL WRENCHES AVAILABLE INCLUDE: Ratcheting
combination, double box-end 15º and 45º, flex head combination, double
open end, open end angle, tappet, ratcheting box, flarenut, adjustable, industrial
finish, pump pattern and pipe tools.
PART NO.
DESCRIPTION
52-627
14 pc 6 pt full polish long combination wrench set, metric
28-048
1-1/2” thin pattern pump wrench
32-524
3/4” structural wrench, black finish
33-076
2-3/8” 12 pt 45º offset striking wrench
ARMSTRONG® SCREWDRIVERS AND NUT DRIVERS
• Screwdrivers available in dual
material, round shank (Standard
and Phillips), square shank,
(standard), cabinet / electrician’s,
Torx®, and Bolster
• Nut drivers available in hollow
shaft, solid shaft and T-handle
• Screw starters
PART NO. DESCRIPTION
66-330
Screwdriver, Torx® T30,
round shank
66-441
Screwdriver, slotted 1/4” x 4”
dual material
66-737
T-handle nut driver, 10 mm
ARMSTRONG® PLIERS AND SNIPS
PART NO. DESCRIPTION
Chain nose with wire
cutter, 6-5/8”
67-436
Long nose quick
release locking, 6”
67-555
Lock ring,
standard, 9”
67-901
Electrician’s stripper/cutter crimper,
8.25”
ARMSTRONG® PUNCHES, CHISELS,
PRY BARS & HAMMERS
PART NO. DESCRIPTION
69-542
18 oz Slimline dead blow hammer
70-579
4 pc pry bar set
70-565
12 pc punch and chisel set
ARM
MSTRONG
67-305
46
LUFKIN® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.lufkintool.com
LUFKIN® SERIES 1000
POWER RETURN TAPES
TOOLS AND EQUIPMENT
• Hi-Viz® case – orange, lightweight,
high strength
• Toggle lock is positioned for convenient
operation and holds the blade
securely in place
• Virtually unbreakable Quad Hook®;
four rivets for extra strength
• 1” blade only
!
LUFKIN® POWER
RETURN TAPES
• Self-compensating end
hook for inside and outside
measurements
• Built in bumper reduces
shock when blade is
retracted, extending
product life
!
L625
1”
25’
L625CME
1”
26’ (8 m)
L616
3/4"
16’
L616CME
3/4"
16’ (5 m)
L610
1/2"
10’
L610CME
1/2"
10’ (3 m)
LUFKIN®
FIBERGLASS TAPES
LUFKIN
47
16’ (5 m)
HV1038CME
3/4"
26’ (8 m)
HV1048CME
1” (25 mm)
26’ (8 m)
HV1049CME
1” (25 mm)
30’ (9 m)
HV1312
3/4"
12’
HV1316
3/4"
16’
HV1325
3/4"
25’
HV1425
1”
25’
LUFKIN®
800 SERIES
XTRA-WIDE
POWER
RETURN
TAPES
XL8525
BLADE WIDTH
BLADE LENGTH
XL8525
1-3/16”
25’
XL8548CME
1-3/16”
26’ (8 m)
• Metric-English tape measures
have 2-sided end hook for use
with either scale
• Blade size: 3/8” (10 mm) wide,
50’ (15 m) long
!"
$"
• Designed for rugged field use
by the surveyor, engineer or contractor
• Durable, waterproof and able to
withstand breakage and abrasion under
extreme conditions
• Two position end hook for inside/outside
readings
BLADE WIDTH
3/4” (19 mm)
LUFKIN® HI-VIZ®
UNIVERSAL
LIGHTWEIGHT
LONG STEEL TAPE
BLADE LENGTH
L625
PART NO.
BLADE LENGTH
HV1035CME
PART NO.
• Hi-Viz® orange case, easy
to find on the job
• Wide base helps keep tape
standing upright
BLADE WIDTH
BLADE WIDTH
• Orange case, cushion grip
• New blade design achieves 10’ stand-out,
make longer measurements
LUFKIN® L600
SERIES POWER
RETURN TAPES
PART NO.
PART NO.
LUFKIN®
BLACK MAX
HI-VIZ®
BLADE
TAPES
• Lightweight, high
strength black case
for comfort and durability
• 4 rivet end hook for long life
• Positive toggle lock holds blade securely at any length
BLADE LENGTH
PART NO.
BLADE WIDTH
BLADE LENGTH
FE050
1/2"
50’
BM416
1”
FE300
1/2"
300’
BM416CME
1”
5 m (16’)
FM030CME
13 mm (1/2”)
30 m (100’)
BM525
1-1/4”
25’
FM100CME
13 mm (1/2”)
100 m (328’)
BM525CME
1-1/4”
7.5 m (25’)
16’
WISS® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.wisstool.com
WISS® AVIATION SNIPS
PART
NO.
(
WISS® STRAIGHT
PATTERN
TINNER’S SNIPS
• Cuts straight and wide curves
• Quality steel hot drop-forged for sharp
edge and long snips life
• Used in plumbing, heating,
air conditioning and roofing trades
!(
WISS® DUCKBILL
COMBINATION
PATTERN SNIPS
• Cuts moderately tight curves left or right
• Blades hand edged for maximum
cutting efficiency
!
WISS® HVAC
COMPOUND
ACTION PIPE
AND DUCT
SNIPS
LENGTH OF CUT
INCHES
MM
M1R
Red
9-3/4”
248
1-3/8”
35
M2R
Green
9-3/4”
248
1-3/8”
35
M3R
Yellow
9-3/4”
248
1-1/2”
38
PART
LENGTH
NO. INCHES
MM
LENGTH OF CUT RECOMMENDED MAX. CAPACITY
INCHES
MM
LOW CARBON COLD ROLLED STEEL
A13N
7”
178
1-3/4”
44
23 gauge (0.025” / 0.63 mm)
A11N
9-3/4”
248
2-1/4”
57
23 gauge (0.025” / 0.63 mm)
A10N
11”
279
2-1/2”
63
21 gauge (0.032” / 0.81 mm)
A9N
12-1/2”
317
3”
76
20 gauge (0.035” / 0.89 mm)
PART
LENGTH
NO. INCHES
MM
LENGTH OF CUT RECOMMENDED MAX. CAPACITY
INCHES
MM
LOW CARBON COLD ROLLED STEEL
V10N
10-1/4”
260
2-1/4”
57
23 gauge (0.025” / 0.63 mm)
V19N
13”
330
3”
76
21 gauge (0.032” / 0.81 mm)
WISS®
RATCHETING
PIPE CUTTERS
• Ratchet pipe cutters offer
an ideal way to cut pipe in
confined spaces
• Cuts brass, copper,
aluminum, PVC and other
thin-walled conduit
material without damage
• Pipe cutting diameter:
1/4”: 7/8”, 6 mm: 23 mm
")(
WISS®
EASY SNIP
UTILITY
SHEARS
• Spring-loaded blades
for reduced fatigue
on repeated cuts
• 420 stainless blades
provide maximum
corrosion resistance
• Length of cut:
4”, 100 mm
WISS
• Cuts curves, straight
or any combination
• Cuts any shape ducts,
seams, sheet metal stock,
vinyl tiles and plastic
laminants
• Patented ball-bearing
jaw action automatically
adjusts blade clearance
for squarer, cleaner cuts
GRIP
LENGTH
COLOUR INCHES
MM
TOOLS AND EQUIPMENT
• Non-slip serrated jaw of tough molybdenum steel
holds material firmly and uniformly spreads cutting
force across blade edge
• Handle of high tensile strength alloy steel exceeds
hand power limit
48
CRESCENT® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.apexhandtools.com/brands/crescent
!
CRESCENT® CONSTRUCTION WRENCH,
BLACK OXIDE FINISH
TOOLS AND EQUIPMENT
• Crescent® quality now available for the
erection, construction and rigging trades
CRESCENT® ADJUSTABLE
WRENCHES
• World famous Crescent® brand
• Proportioned dimensions for greatest strength
and minimum weight
• Nickel plated finish resists rust and corrosion
LENGTH
JAW OPENING
PART NO.
INCHES MM INCHES MM
AC14V
4”
100
1/2”
13
AC16V
6”
150
15/16”
24
AC18V
8”
200
1-1/8”
29
AC110V
10”
250
1-5/16”
33
AC112V
12”
300
1-1/2”
38
*
PART NO.
LENGTH
INCHES MM
JAW OPENING
INCHES MM
AT10SPUD
10-1/2”
270
1-1/8”
29
AT115SPUD
16”
406
1-1/2”
38
!
CRESCENT® LOCKING PLIERS AND CLAMPS
• Crescent® brand locking pliers are made to an exacting standard that results in
improved durability and long-term performance
• Long nose, curved, and straight jaw pliers feature a patented angled tooth pattern
for a better grip, and every style has a tough nickel-plated finish for maximum
resistance to rust and corrosion
PART NO.
LENGTH
INCHES MM
JAW OPENING
DESCRIPTION
INCHES
MM
C7SV
7-1/4”
184
1-5/8”
42
Straight jaw locking
pliers
C10SA
10”
254
1-3/4”
45
Self-adjusting
locking pliers with
wire cutter
C5CV
5-5/8”
142
1-1/4”
32
Curved jaw locking
plier with wire cutter
C9NV
8-3/4”
222
2-7/8”
73
Long nose locking
plier with wire cutter
C11CCV
11”
280
4”
102
Locking C-clamp,
regular tips
C6CCSV
7”
178
2-1/8”
54
Locking C-clamp,
swivel pad tips
C8SMV
10-5/8”
375
1-3/4”
45
Locking sheet metal
clamp
C9W
9-3/8”
236
2-1/8”
54
Locking welder’s
clamp
CRESCENT® 170 PIECE MECHANIC’S TOOL SET
• Set contains all the tools needed for most industrial applications, including 1/4”,
3/8”, and 1/2” quick-release ratcheting drivers, with a wide selection of standard
and deep sockets in the most common SAE and metric sizes
CRESCENT® R2 RAPIDRENCH™
RATCHETING SOCKET WRENCH
$
CR
RESCENT
49
(
• An adjustable jaw
opening to accommodate
38 different bolt/nut sizes,
from 1/4” – 7/8”
• Jaw design extends into
deep areas
• Reversible ratcheting
mechanism
CRESCENT® A-N
CONNECTOR PLIERS
• Fits A-N electrical connectors, sizes from 0.75” – 2.5”
• Three adjustment positions
&&
(
CRESCENT®
CARPENTER’S PINCERS
• Ideal for cutting or pulling nails and wire
• Electronically induction hardened cutting edges give
long lasting cutting performance
NICHOLSON® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.apexhandtools.com/brands/nicholson
BI-METALOY® HAND HACKSAW BLADES
NICHOLSON® 4-IN-1 PRO SERIES
HACKSAW FRAME
• High tension technology for tightening the blade
up to 30,000 psi
• 45 degree angle for flush cuts
• Low profile position for tight spaces
• Lasts twice as
long as high-speed
steel, and, up to
ten times longer
than carbon steel
BLADE LENGTH
62723
NF1218
Bi-Metaloy® 12" x 18
62749
NF1224
Bi-Metaloy® 12" x 24
62776
NF1232
Bi-Metaloy® 12" x 32
M5A7F=/287/6782
NICHOLSON®
SLIM TAPER
FILES
LENGTH
INCHES
MM
PART NO.
TAPER
• Edges set and cut
for filing gullets
between saw teeth
8"
200
14290M
Slim
6"
150
14665M
Extra Slim
6"
150
15024N
Double Extra Slim
NICHOLSON® GENERAL PURPOSE
HACKSAW FRAME
• Instantly adjustable for 10"/250 mm to 12"/300 mm blades
• Adjusts 90º for vertical or horizontal cuts
PART NO. REF. NO.
M5A7F=/287/6782
NICHOLSON®
CHAIN SAW
FILES
NICHOLSON® ECONOMY
HACKSAW FRAME
LENGTH
PART NO. INCHES MM
PACKED DESCRIPTION
01765
3/16"
4.76
1/card
Round, smooth, knurl-cut
01888
7/32"
5.55
1/card
Round, smooth, knurl-cut
01891
5/32"
3.96
1/card
Round, smooth, knurl-cut
M6:7FT/87/6782M<8/8:GM1K
U%;;
TOOLS AND EQUIPMENT
• Adjustable from 10"/250 mm to 12"/300 mm
NICHOLSON®
HALF ROUND FILES
• Used on concave, convex and flat surfaces
SECOND CUT
LENGTH
INCHES
MM PART NO.
4"
100
04729N
6"
150
04828NN
8"
200
04927NN
10"
250
05026N
12"
300
05125N
14"
350
05225N
NICHOLSON®
ROUND
FILES
• Primarily used to
file circular openings
or concave surfaces
LENGTH
DIAMETER
BASTARD CUT
INCHES
MM INCHES
MM PART NO.
4"
100
1/8"
3
11526N
5"
125
3/16"
5
11637N
6"
150
1/4"
6
11716N
8"
200
5/16"
8
11904
10"
250
3/8"
10
12019
12"
300
1/2"
13
12134
14"
350
5/8"
16
12248
/71<6/=/86:7851:2:27;11M54
/71<6/=/86:=72:27;11M54
NICHOLSON® MILL FILES
BASTARD CUT
LENGTH
INCHES
MM WIDTH
4"
100
03367N
BASTARD CUT
PART NO.
6"
150
03467N
8"
200
03566N
8"
200
08497N
10"
250
03665N
10"
250
08642N
12"
300
03764N
12"
300
08737N
14"
350
03863N
16"
400
03980N
/71<6/=/86:7851:2:27;11M54
• Used by machinists, machinery
builders, ship and engine builders,
repairman and others who require
rapid removal of metal
/71<6/=/8
6:7851:2:2
7;11M54
NIC
CHOLSON
LENGTH
INCHES
MM
NICHOLSON®
FLAT FILES
50
H.K. PORTER® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.apexhandtools.com/brands/hkporter
H.K. PORTER®INDUSTRIAL GRADE,
CENTER CUT CUTTERS
TOOLS AND EQUIPMENT
H.K. PORTER® STEEL STRAP CUTTERS
• Workhead has black oxide, rust-resistant finish
• 1-handed operation gives extra leverage for continuous cuts of
wide steel strap, quickly and cleanly
&
• General plant maintenance tool
• Drop-forged, precision ground and hardened, alloy tool steel jaws
with center-cut blades
• Toggle joints turn 50 lb hand pressure to 4,000 lb cutting pressure
H.K. PORTER® WIRE CUTTER
SOFT AND MEDIUM
HARD
LENGTH
HARD MATERIALS* MATERIALS**
PART NO. INCHES MM INCHES
MM INCHES
MM
1490MC
14”
356
5/16”
8
3/16”
5
0090MC
18”
457
3/8”
10
1/4”
6
0190MC
24”
610
7/16”
11
5/16”
8
0290MC
30”
762
1/2”
13
3/8”
10
0390MC
36”
914
9/16”
14
7/16”
11
0590MC
42”
1067
11/16”
18
1/2"
13
.*016:F8//915AF8//..*016:F8//915AF8//
H.K. PORTER® RATCHET-TYPE
ONE HAND OPERATED SOFT
CABLE CUTTER
• Center-cut blades
• Cuts mild steel (Brinwell 140) (80,000 PSI) to 5/32” diameter
• Cuts hard steel (HRC 44) (208,000 PSI) to 3/32” diameter
H.K. PORTER® INDEXING REBAR BENDER
• Extra-sturdy steel handles for the
toughest conditions
• Super-strong indexing head grips
rebar securely for accurate bends
• 14-position indexing head adjusts
with centre pushbutton to allow
total access for maximum leverage
PART NO. DESCRIPTION
RB4
#3 & #4 (3/8" & 1/2")
RB5
#5 (5/8")
RB6
#6 (3/4")
LENGTH
FREQUENT USE MAXIMUM CAPACITY*
PART NO. INCHES MM COPPER
ALUM. COPPER
ALUM.
3590FS
9”
229 500 MCM
600 MCM 600 MCM
750 MCM
• Compact size cutter
5090FS
10-1/2”
267 600 MCM
1000 MCM 750 MCM
1000 MCM
• 1-hand operation allows cutting in confined spaces
V(18H5056E2187:16:5/4285=/86:74/61:@5056E8L487151:245176O81:/E@
• Ratchet-type jaws with shear-cut blades
WELLER Code: 442
Website: www.apextoolgroup.com
Catalogue: www.apexhandtools.com/brands/weller
BATTERY POWERED
SOLDERING IRON KIT
• Perfect for field service repair on small parts
and components
• Heats up to working temperature (900ºF) in under
15 seconds
SOLDERING GUNS
AND KITS
H.K
K. PORTER / WELLER
51
UNIVERSAL GUN AND KIT:
• PART #8200PK
• High efficiency, tin-plated copper tip
• Kit contains: 8200 dual heat soldering gun
(that produces 140 or 100 watts), 1 soldering tip, 1 smoothing tip,
1 cutting tip, flux brush, soldering aid tool and a coil of lead free solder
• Part #7135W, standard tip, replacement tip for 8200PK, 2 tips/bag
PROFESSIONAL HEAVY-DUTY GUN AND KIT:
• Part #D550PK
• Heavy gauge, high efficiency, tin-plated copper tip
• Kit contains: D550 soldering gun (that produces 260 or 200 watts) with
1 soldering tip, 1 smoothing tip, 1 cutting tip, flux brush, soldering aid tool
and a coil of lead free solder
• Part #7250W, standard tip, replacement tip for D550PK, 2 tips/bag
MAGNA-LITE BUTANE
TABLE TOP TORCH
• Up to 60 minutes continuous use controls flame
temperature up to 2,400ºF
• Refillable with Weller® WB1C filtered butane
PORTASOL® SUPER-PRO
SELF-IGNITING KIT AND TOOL
• Ideal for service technicians for such uses
as anti-static soldering, heat shrink and cutting rope
• Adjustable temperature up to 1,076ºF
MARKSMAN® IRON (25 WATT)
• Ideal for hobbies, kits, radios, and electronics work
• Includes MT1 1/8” / 3 mm diameter replaceable
nickel-plated copper tip
• Develops 750ºF / 400ºC
XCELITE® Code: 442
Website: www.apextoolgroup.com
Online Catalogue: www.cooperhandtools.com/brands/xcelite
XCELITE® PRECISION ELECTRONIC
SCREWDRIVER SET
XPTX600 CONTAINS 1 SCREWDRIVER EACH OF:
,,
•
•
•
•
•
•
• Superior blade by-pass shear cutting action
• Flush cuts soft wire up to 20 AWG (0.8 mm)
#5 point standard Torx® tip
#6 point standard Torx® tip
#7 point tamper-proof standard Torx® tip
#8 point tamper-proof standard Torx® tip
#10 point tamper-proof standard Torx® tip
#15 point tamper-proof standard Torx® tip
RED
PART NO.
GRIPS
&!
170M
XCELITE® 104CG WIRE STRIPPER
AND CUTTER
•
•
•
•
X
170D
X
175M
For copper and aluminum wire 10 – 22 AWG
Wide size-range bolt cutter / Screw sizing stations
Scissors-action, up-front wire cutting and wire stripping
Hardened pivot joint bushing and crimp stations
XCELITE® 103S WIRE STRIPPER
• For industrial use; 8 – 22 AWG
• Unique cam stop adjustment for different wire sizes,
stays put even with screw loose
X
X
175D
X
X
X
X
80/58;8:=/287<6/=/8K1,(6:5/428H
,(/28E08H,(
!
ESPECIALLY
SAFETY HARDENED
CLIPS
AND PLATED
BLACK
GRIPS
XCELITE® LIGHTDUTY PRECISION
KNIVES
• Designed for light-duty cutting
on paper, soft and light-weight
materials or wood
PART NO. DESCRIPTION
XNB101
Standard, general-duty for cutting,
carving and correcting stencils
XNB103
Fine pointed, for most detailed
cutting and stripping
XNB105
Stencil, for scoring and etching as
well as stencil cutting
PLUMB® Code: 442
TOOLS AND EQUIPMENT
XCELITE®
SHEARCUTTER –
GENERAL PURPOSE
• ESD safe to provide protection to ESD sensitive items
Website: www.apextoolgroup.com
Catalogue: www.cooperhandtools.com/brands/plumb
(
(
PLUMB® SOLID STEEL
ANTI-SHOCK PREMIUM RIPPING
CLAW HAMMERS
PLUMB® SOLID STEEL
ANTI-SHOCK PREMIUM CURVED
CLAW HAMMERS
• Patented anti-vibration shock absorbing technology
• 1-Piece forged solid steel construction
• Co-molded contoured handle for increased comfort
and control
• “Thumb-Saving” magnetic nail starter saves time,
reduces chance of injury
•
•
•
•
HEAD WEIGHT
OAL
PART NO. OZ
GR INCHES MM FACE
SS16RN
16
454
SS20RN
20
567
SS22RN
22
624
SS22RCFN
22
SS28RN
28
SS28RCFN
28
12.875”
327
Polished
13.75”
34
Polished
15.875”
403
Polished
624
15.875”
403
Checkered
794
16”
406
Polished
794
16”
406
Checkered
Patented anti-vibration shock absorbing technology
Co-molded contoured handle for increased comfort and control
“Thumb-Saving” magnetic nail starter saves time, reduces chance of injury
1-Piece forged solid steel construction
HEAD WEIGHT
OAL
PART NO. OZ
GR INCHES
MM
SS16CN
16
454
12.875”
327
SS20CN
20
567
13.75”
34
PLUMB®
FIBERGLASS
BRICK
HAMMERS
PLUMB®
HICKORY
HANDLED
SCALING
HAMMER
PLUMB®
EXPERT
SHINGLING
HATCHET
52
COLEMAN Code: 588
Website: www.colemancanada.ca
&
TOOLS AND EQUIPMENT
40 QUART POWERCHILL™
THERMOELECTRIC COOLER
• Perfect for the office, dorm rooms, RVs, campers, truck
cabs, cars, SUVs
• 40 quart capacity
• Holds 44 cans plus snacks
• Cools to 40°F below surrounding temperature
• Plugs into cigarette lighter with included 12 V adapter
• Exterior dimensions: 21.75” x 15” x 17.125”
&
BEVERAGE COOLERS
110 VOLT POWER SUPPLY
FOR THERMOELECTRIC
COOLERS
EXCURSION® COOLERS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
3000000858
Blue, 5 gallon
3000000159
16 quart, holds 22 cans, 14” x 15” x 9.5”
5592C703G
Red, 2 gallon
3000000168
9 quart, holds 6, 20 oz bottles, 11.25” x12.66” x 9.75”
WHEELED XTREME® 6 COOLERS
•
•
•
•
Keeps ice up to 6 days at 90°F
Hinged lid with beverage holders
Two way handles for flexible easy carrying
Rustproof, leak resistant channel drain for no-tilt easy draining
PART NO. DESCRIPTION
&
COLEMAN
53
&
6273A721G
58 quart, holds 75 cans, exterior: 29” x 14” x 18”
6263A721G
50 quart, holds 70 cans, exterior: 31.50” x 18.25” x 16.13”
54 QUART STEEL
BELTED® COOLER
100 QUART
COOLER
150 QUART
MARINE COOLER
• Holds 85 cans
• Holds 130 cans
• Holds 223 cans plus 55 lbs of ice
48 QUART HUNTING /
FISHING COOLER
• Holds 63 cans plus 17 lbs of ice
INGERSOLL RAND Code: 961
Website: www.irtools.com
AIR HAMMER KIT
AIR HAMMER
• Up to 3,500 blows per minute
• Handles a range of cutting
applications
• Longer life alloyed steel barrel
and heat-treated piston
CLUB AIR
RATCHET WRENCH
MINI AIR
DIE GRINDER
1/2" TITANIUM IMPACTOOL™
• Power: Get 780 ft/lb max power in reverse from
a tool weighing just 3.95 lb, the best power-to-weight ratio in its class.
• Control: New professional touch trigger, a wider range of power regulator
settings in forward, and our patented push button fwd/rev provide
maximum control.
• Reliability: Designed to
PART NO. DESCRIPTION
last, and backed by the
MAX Protection Program
2135TIMAX
1/2” titanium impactool
that offers a free 2 year
1/2”
quiet titanium
limited warranty with tool
2135QTIMAX
impactool
registration.
COMPOSITE
AIR DIE
GRINDER
1/2" IMPACTOOL™
• Handle exhaust directs air away from user
• 590 ft/lb maximum torque
• Adjustable power regulation
• Superior
maneuverability
• Standard 1/4”
collet for all
types of
accessories
• Front exhaust
helps keep work
surface clean
• Powerful 1/3
horsepower motor
• Lightweight yet
durable design
• All ball bearing
construction
AIR DIE
GRINDER
1/2" IMPACTOOL™
• Pressure-feed lubrication
• Adjustable power regulator
• Easy to service two piece construction
• Ball bearing
construction for
longer tool life
• Self-locking
throttle lever
• Positive grip
1/4” capacity
collet chuck
3/4" IMPACTOOL™
• Jumbo hammer mechanism
• Up to 1,100 ft/lb of torque
• Compact and only 7-5/8” long
3/4" COMPOSITE
IMPACTOOL™
• Weighs just 7 lb
• 1,200 ft/lb maximum torque
3/4"
IMPACTOOL™
• Non-biased motor
delivers 1,050 ft/lb of
maximum torque in both forward and reverse
• Smaller and up to 2 pounds lighter than other
3/4” impacts in its class
• Unlike most other 3/4” impacts, the 259 doesn’t
require an upgrade to a 1/2” air line, meaning
lower shop costs and greater convenience of
use…all without sacrificing tool performance
PART NO.
DESC.
1207MAX-D3
3/8”
1207MAX-D4
1/2”
3/8" AIR RATCHET
WRENCH
• Variable speed lever-style throttle
• 360º adjustable exhaust
• Heat-treated ratchet housings
PART NO.
DESC.
107XPA
54 ft/lb max torque
109XPA
76 ft/lb max torque
MINI AIR RATCHET
WRENCH
• 25 ft/lb max torque and 250 rpm
free speed deliver impressive
power to get the task at hand
done fast
• Ergonomic coupling nut and
handle ensure a comfortable grip
with no sharp edges
PART NO.
DESC.
105-D2
1/4”
105-D3
3/8”
INGERSO
OLL RAND
• MAX Power: 65 ft/lb of
maximum torque ensures enough
power for tough applications.
• MAX Control: Innovative
forward/reverse collar, variablespeed power regulator, adjustable
exhaust, and feather-touch trigger
combine to offer unprecedented
control.
• MAX Comfort: Ergonomic
coupling nut and composite
handle ensure operator comfort
even during extended use;
composite handle insulates from
the cold.
TOOLS AND EQUIPMENT
• Professional touch trigger
for total control
• Long-life tool with a tough
one piece alloy barrel
• Easy to maintain, with an
“easy-out” throttle valve
assembly
54
GILMOUR Code: 476
Website: www.gilmour.com
MULTI
PURPOSE
SPRAYERS
SPRAYERS
TOOLS AND EQUIPMENT
PREMIUM SPRAYERS
• Pivoting outside handle for
carrying and easy filling/pouring
• Extra-wide mouth opening for
easy fill and cleaning
• Manual and automatic pressure relief valve
• Fast pressurizing, 10” polymer pump
PART NO. DESC.
1000P
1 gallon
2000P
2 gallon
3000P
3 gallon
• Chemical resistant
Viton seals
• 18” brass wand with
adjustable brass nozzle
• Extra long 52”
premium PVC hose
PART NO. DESC.
101P
1 gallon
201P
2 gallon
301P
3 gallon
• Extra-wide mouth
opening for easy fill
and cleaning
• Manual and automatic
pressure relief valve
• Fast pressurizing,
10” polymer pump
• Chemical resistant
Viton seals
• 16” polymer wand
with adjustable
polymer nozzle
• 33” premium PVC hose
COMMERCIAL
SPRAYERS
PART NO. DESC.
100HDPI
1 gallon
300HDPI
3 gallon
CUTTERS
REEL MOWER
COMMERCIAL
BYPASS PRUNERS
• 3/4” diameter cutting capacity
• Cast aluminum handles
with vinyl coated grips
• Hardened and tempered
precision ground steel blade
• Adjustable tension
• Heavy duty external spring
• Rigid thermoplastic
polymer tank
• Extra wide mouth
opening for easy fill
and cleaning
• Fast pressurizing 10”
polymer pump
• 42” reinforced
polyethylene-lined hose
• Hose spring to prevent
kinks at tank
• Polymer adjustable and
fixed fan spray tips
• External carry handle
for easy pouring and
carrying
GARDEN SCISSORS GEAR DRIVE
TREE PRUNER
• 3” blade
• Multi-purpose garden tool
• Precision ground, stainless
steel blade
• Blade notch for larger stems
• Internal spring for easier
more comfortable cutting
• Cushioned comfort grips
with locking handles
• Fibreglass poles
telescope from 6’ to 18’
• 1-1/4” diameter cutting
capacity
• Heavy duty solid steel
head with hardened
and tempered steel
lopper blade
TRADITIONAL
GRASS
SHEARS
• Edge hardened
blades with
nonstick coating
• Self adjusting
blade tension
• Blades rotate
45º and 90º
• Wide 20”
mowing width
• Self sharpening
• 5 blade reel with
ball bearings for
smooth cutting
• Adjustable
bed knife
• Height adjusts from
1 to 3 inches easily
• Dual wheel design
is more stable and tracks evenly
• 10” front wheels - cleated to reduce slippage
• Large loop handle with comfort grip
HOSES
8 PLY FLEXOGEN
GILMOUR
• Professional quality
• Flexogen is the hose that has
long set the standard for quality
in garden hoses
• 8-ply construction, 500 PSI
burst strength
• Double tire cord reinforced for
strength
• Lightweight, coils and handles easily
• Flow Guard Plus protective collar on
all 5/8” and 1/2” hoses resists kinks
at faucet
PART NO.
10-12025
1/2" x 25'
10-12050
1/2" x 50'
10-12100
55
DESC.
1/2" x 100'
MARINE &
RECREATION /
SPACE SAVER
FLAT HOSE
ALL PURPOSE
RUBBER HOSE
COMMERCIAL
RUBBER / VINYL HOSE
HOT WATER
FLEXOGEN
• Space saving flat hose
is easy to store; ideal
for confined spaces
• FDA approved liner
material
• Full-Flo metal couplings
for unrestricted water flo
• Withstands hot water
up to 160ºF
• High burst strength
• Metal couplings for
unrestricted water flow
• Double cord reinforced
• Kink resistant and flexible
• Resistant minor
abrasions and weather
• Reinforced layers add strength
and flexibility
• 6-ply construction
• 500 PSI burst strength
• Double reinforced for commercial
strength
• Protective collar resists kinks at faucet
• Heavy-duty machined metal couplings
with O-ring
PART NO. DESC.
PART NO. DESC.
PART NO.
DESC.
11-12025
1/2" x 25'
19-58050
5/8" x 50'
29-58025
5/8" x 25'
11-1202RL
1/2" x 25'
19-58100
5/8" x 100'
29-58050
5/8" x 50'
• Withstands hot water
up to 200ºF yet weighs
33% less than traditional
rubber hose
• 400 PSI burst strength
• Double reinforced with
year-round flexibility
• Lightweight and soft,
yet durable
• Kink resistance
• Heavy-duty machined
metal couplings with
O-ring for tight seals
• Abrasion resistant cover
11-12050R
1/2" x 50'
29-58075
5/8" x 75'
29-58100
5/8" x 100'
PART NO. DESC.
50-58050
5/8" x 50'
GILMOUR Code: 476
Website: www.gilmour.com
NOZZLES
SPRINKLERS
METAL
PISTOL
GRIP
NOZZLE WITH
STORAGE LOOP
METAL
PISTOL
GRIP
NOZZLE
WITH STORAGE
LOOP
• Adjustable spray pattern
• Hold-open button for
continuous spraying
• Molded cushioned grip
for comfort
• 8 spray patterns
• Hold-open button for
continuous spraying
• Molded cushioned grip
for comfort
$
$
COMMERCIAL
INSULATE NOZZLE
COMMERCIAL
INSULATE NOZZLE
• For spraying hot or cold water
• Male hose threaded front for
attaching accessories
• Brass head insert for
maximum resistance to
extremely hot water
• Solid brass valve stem with
permanent adjusting nut
• Rust resistant stainless steel
spring
• For spraying hot or cold
water
• Male hose threaded front
for attaching accessories
• Solid brass valve stem with
permanent adjusting nut
• Rust resistant stainless
steel spring
METAL
TRIPOD
SPRINKLER
METAL
OSCILLATOR
• Telescoping tripod reaches
height of 58” for extra high
coverage and even larger
distances
• Spiked feet for added
stability
• Coverage up to 5,800 sq ft
• Heavy-duty metal
• Metal spray tube with
17 metal jets
• Easy to use rotation dials
• Coverage up to
3,500 sq ft
!
OSCILLATING
SPRINKLER
WITH UNIQUE
VARIABLE JETS
OSCILLATING
SPRINKLER
METAL IMPULSE
SPRINKLER
• Heavy-duty polymer base
• Metal spray tube with
17 metal jets
• Coverage up to
3,500 sq ft
• Heavy-duty metal,
made to last
• Metal head on metal
sled base
• Coverage up to
5,800 sq ft
• Heavy duty polymer base
• 18 adjustable jets and one
stationary jet
• Jet control dials offer
exceptional precision
• Easy to use rotation dials
• Coverage up to 4,000 sq ft
TOOLS AND EQUIPMENT
HANGERS, TIMERS AND MENDERS
SOLID
BRASS
TWIST
NOZZLE
•
•
•
•
Full size
All brass valve stem
Precise tip angle
Adjustable from fine spray to
needle stream to heavy rinse
SELECTA-SPRAY
NOZZLE
• Comfortable cushioned
vinyl grip
• All brass valve stem with
permanent adjusting nut
• Heavy-duty die cast
metal body
SINGLE
OUTLET TIMER
DOUBLE
OUTLET TIMER
• Holds up to 100 ft of hose
• Keyhole design for easy
installation
• Durable, rust resistant baked
enamel finish
• Continuous watering
up to 120 minutes
• Full flow outlet for more
sprinkler performance
• Manual on/off
• Continuous watering
up to 120 minutes
• Full flow outlet for more
sprinkler performance
• Manual on/off
• Double outlets can be
used at the same time
ZINC MENDERS
METAL TURBO NOZZLE
• Power spray
• Large grip handle
contros water flow
• Fireman’s style tip
adjusts spray pattern
• Molded grip for
cushioned comfort
•
•
•
•
Impact resistant
Non-corroding high grade stainless steel screws
Leakproof-reusable
Fits all 5/8” & 3/4” hose
PART NO. DESCRIPTION
01FZ
Female, 5/8" and 3/4"
01MZ
Male 5/8" and 3/4"
01HMZ
Mender 5/8" and 3/4"
GILMOUR
$
STEEL
HOSE HANGER
56
KEN-TOOL Code: 388
Website: www.kentool.com
TOOLS AND EQUIPMENT
HEAVY DUTY T-47 TUBELESS TIRE IRON SET
• Set contains 1 of each: 34847 (T47A), 34848 (T47B) and 34849 (T47C)
• Individual parts are also sold separately
PART NO. DESCRIPTION
34847
T47A, heavy duty straight mount/demount tool
34848
T47B, heavy duty straight mount/demount tool extension for T47C
34849
T47C, heavy duty offset mount “C” bar
HD TUBELESS TRUCK TIRE
T45HD MOUNT/DEMOUNT
T45AC CLASSIC DESIGN TRUCK
TIRE MOUNT/DEMOUNT
1 END TIP DESIGN TRUCK TIRE
MOUNT/DEMOUNT
• Ken-Tool heavy duty version of original design T45A
• HD TT truck tool for use on truck, agricultural
and industrial tires
• 41” length
• 7/8” stock
• 1 end tip design for “grabbing” rim truck tire
mount/demount T45A-2000K
KEN TOOL 3-IN-1 STRAP
WINDER TOOL FOR TRUCKERS
HANDY 3-IN-1 TOOL GREAT FOR TRUCKERS
BEAD HOLDING
DEVICE
• Use with tire irons in
mount process to hold
bead in place
• Solid brass
• Quick Wind, Tire Check or Cheater Bar
• Patented design allows fast and easy
strap winding with one hand
• Steel construction is durable and
provides long lasting service
• Foam rubber grip is comfortable even
after repeated use
• Use to tighten cargo straps, winches
and as a tire knocker
• Made in the USA
DUCK BILLED
BEAD BREAKING
WEDGE T11E
• Duck billed bead breaking wedge with
wood handle
KEN-TTOOL
57
HEAVY DUTY IMPACT BEAD
BREAKER T26B
• Ken-Tool spring action designed to reduce fatigue
• One piece bead breaker
BLUE COBRA
• One piece truck tire demount tool
MOST POPULAR KEN-TOOL ITEM
DUCK BILLED BEAD
BREAKING WEDGE TG11E
• Duck billed bead breaking wedge with
fibreglass handle
MILTON Code: 625
Website: www.miltonindustries.com
P-STYLE PARKER
INTERCHANGE SERIES
3/8” BASIC SIZE
PART NO. DESCRIPTION
1803
• Couplers are heavy duty brass
• Plugs are heavy duty steel plated to
resist rust
• Coupler bodies have 8 locking balls
• Maximum inlet pressure: 300 PSI
• Maximum temperature: 250ºF
• Air flow: 88 SCFM
• Seals: Buna-N
S-1803
1805
S-1805
1809
S-1809
P-Style Coupler & Plug Combo Assembly - 1/4” NPT female connection
P-Style Coupler - 1/4” NPT female connection
P-Style Coupler - 1/4” NPT female connection skin/display pack
P-Style Coupler - 3/8” NPT female connection
P-Style Coupler - 3/8” NPT female connection skin/display pack
P-Style Plug - 1/4” NPT male
P-Style Plug - 1/4” NPT male skin/display pack. NOTE: 2 per card
3 IN 1 AIR MANIFOLDS
• Supply air tools from a single inlet
• No need to disconnect and connect
for every tool change
PART NO. DESCRIPTION
S-685-4
1/4” NPT inlet female, 3 outlets 1/4” NPT female
S-685-6
3/8” NPT inlet female, 3 outlets 1/4” NPT female
S-685-8
1/2” NPT inlet female, 3 outlets 1/4” NPT female
INFLATOR GAUGE
COMPACT SAFETY
LEVER BLO-GUN
Compact and versatile blo-gun comes with
both a safety nozzle and rubber tip nozzle.
Has a hang-up hook for easy storage.
• SCFM 11.7 @ 100 PSI safety-tip
• SCFM 12.9 @ 100 PSI rubber tip
• 1/4” NPT air inlet
• Zinc die-cast body
• OSHA compliant with safety tip only
• Maximum working pressure 150 PSI
• Milton brand quality industry accepted
window gauge
• 10 to 20 lbs in 2 lb increments
• Includes magnifying lens for full view of scale,
dual head chuck and 15” full swivel hose
• Readings also in kPa metric increments
• Gauge cartridge and valve cartridge are
replaceable
PART NO.
DESCRIPTION
08-A1-506
Inflator gauge dual
head chuck, large bore
S-506
Skin/display pack
COALESCING AND METAL
BOWL AIR LINE FILTERS
VARIABLE ANGLE
SWIVEL FITTINGS
•
•
•
•
•
• Fittings rotate at 360 degrees at a 45º angle in
any direction eliminating hose twisting and kinking
• Maximum working pressure: 145 PSI
• Temperature range: -37ºF to +176ºF
Light weight aluminum die cast housing
Available 10 or 40 micron elements
250 PSI metal bowls
Milton coalescing filters 99.97% efficient
All filters supplied with pre-assembled automatic overnight drains
PART NO.
DESCRIPTION
Heavy Duty Air Line Filter 1/4” NPT, 250 PSI 48 SCFM
1019-8
Heavy Duty Air Line Filter 3/8” NPT, 250 PSI 75 SCFM
1020-8
Heavy Duty Air Line Filter 1/2” NPT, 250 PSI 100 SCFM
1035
Coalescing Air Line Filter 1/4” NPT, 250 PSI 24 SCFM, .03 Sub Micron
1036
Coalescing Air Line Filter 3/8” NPT, 250 PSI 37 SCFM, .03 Sub Micron
1037
Coalescing Air Line Filter 1/2” NPT, 250 PSI 37 SCFM, .03 Sub Micron
DESCRIPTION
S-99681
1/4” male x 1/4” male NPT
S-99681-4
1/4” male x 1/4” M (Milton) style plug
S-99681-6
1/4” male x 1/4” A (ARO 210) style plug
DUAL HEAD STRAIGHT FOOT
CHUCK TRUCK TIRE GAUGE
120 PSI
MILTON
1018-8
PART NO.
TOOLS AND EQUIPMENT
S-1802
58
OLFA Code: 280
Website: www.olfa.com
TOOLS AND EQUIPMENT
9 MM STANDARD DUTY CUTTERS
Designed for multi-purpose projects
PART NO.
CATALOGUE NO. DESCRIPTION
5001
180
Multi-purpose utility knife
1075449
XA-1
Comfort grip utility knife
5010
AB-10B
10 pack – 13 segment replacement blade
5015
AB-50B
50 pack – 13 segment replacement blade
SAFETY KNIVES
Designed to reduce cut injuries
PART NO.
18 MM HEAVY DUTY CUTTERS
Designed for a wide range of industrial and construction projects
PART NO.
CATALOGUE NO. DESCRIPTION
9048
SK-4
Self-retracting safety knife
1077174
SK-7
Compact self-retracting
safety knife
1077171
SK-8
Automatic self-retracting
safety knife
1086095
SK-9
Self-retracting safety knife
with tape slitter
9613
SKB-2/10B
10 pack replacement
blade for SK-4 and SK-9
9615
RSKB-2/10B
10 pack rounded tip
replacement blade for
SK-4 and SK-9
1077172
SKB-7/10B
10 pack replacement
blade for SK-7
1077173
SKB-8/10B
10 pack replacement
blade for SK-8
CATALOGUE NO. DESCRIPTION
5003
L-1
Ratchet lock utility knife
5004
L-2
Ratchet lock utility knife with rubber grip
1072198
LA-X
Slide lock comfort grip utility knife
5009
LB-10B
10 pack – 8 segment replacement blade
5016
LB-50B
50 pack – 8 segment replacement blade
9070
LBB-10B
10 pack “Ultra-Max” 8 segment replacement blade
9069
LBB-50B
50 pack “Ultra-Max” 8 segment replacement blade
9005
LH-20B
5 pack – 4 segment replacement hook blade
25 MM EXTRA HEAVY DUTY CUTTERS
Designed to cut through the toughest materials
PART NO.
OLFA
59
CATALOGUE NO. DESCRIPTION
STAINLESS STEEL SCISSORS
5006
H-1
Extra-heavy duty cutter
1071858
XH-1
Extra-heavy duty comfort grip cutter
5008
HB-5B
5 pack – 7 segment replacement blade
PART NO.
9061
HB-20B
20 pack – 7 segment replacement blade
9765
SCS-1
5" heavy duty serrated scissor
1082209
HBB-20B
20 pack “Ultra-Max” 7 segment replacement blade
9766
SCS-2
7" heavy duty serrated scissor
Heavy duty industrial strength scissors
CATALOGUE NO. DESCRIPTION
PORT-A-COOL Code: 459
Website: www:port-a-cool.com
!
Port-A-Cool® portable evaporative cooling units
cool air through the process of evaporation.
All-natural cooling, using 115 V electricity and
tap-water, can effectively cool large outdoor areas
up to 20°F/-6.67°C. One-piece, roto-molded
polyethylene housings will not crack, leak or rust.
Units provide spot-cooling wherever you need
it: warehouses, garages, workshops, industrial
facilities, shipping docks, assembly lines, barns,
outdoor events, or anywhere A/C is impractical,
inefficient, or cost-prohibitive.
'
PART NO.
DESCRIPTION
PAC2KCYC01
Port-A-Cool Cyclone™ 3000: 3,000 CFM, cools 700 sq ft, 16 gallon tank with hose connection
LOUVERS
PAC163SVT
16” 3-Speed Vertical-Tank Unit: 3,900 CFM, cools 900 sq ft
PAC2K36HPVS
36” Variable-Speed Unit: 10,100 CFM, cools 2,650 sq ft, 32 gallon tank with hose connection
PAC2K482S
48” 2-Speed Unit: 20,000 CFM, cools 4,000 sq ft, 40 gallon tank with hose connection
Adjustable louvers for
Port-A-Cool® portable
evaporative coolers
direct airflow and aid in
spot cooling.
REPLACEMENT KÜÜL®
PADS EVAPORATIVE
COOLING MEDIA
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
PAD6022.5/26
For PAC2KCYC01
LOUVER-KIT-16
For PAC163SVT
KÜÜL® Pads evaporative cooling media
is designed to optimize the evaporative process needed to provide cool
air in Port-A-Cool units. The industry’s
strongest pad has the heaviest paper
and highest resin content to provide
durability and promote long pad life.
PAD6024/G
For PAC163SVT
(set requires 3 pieces)
LOUVER-KIT-36
For PAC2K36HPVS
LOUVER-KIT-48
For PAC2K482S
PAD6048/G
For PAC2K36HPVS
(set requires 5 pieces)
PAD6060/G
For PAC2K482S
(set requires 6 pieces)
TOOLS AND EQUIPMENT
PORT-A-COOL®
PORTABLE
EVAPORATIVE
COOLERS
VINYL COVERS
Black vinyl covers protect your Port-A-Cool® portable evaporative
coolers unit when not in use.
PART NO.
DESCRIPTION
PAC-CVR-01
For 36” units, PAC2K36HPVS
PAC-CVR-03
For 48” units, PAC2K482S
PAC-CVR-04
For 16” units, PAC163SVT
REPLACEMENT MOTORS
++
PART NO.
DESCRIPTION
MOTOR-013-07
For PAC2KCYC01
MOTOR-012-04E
For PAC163SVT
MOTOR-012-05
For PAC2K36HPVS
MOTOR-010-01
For PAC2K482S
MINERAL TREATMENT FOR
EVAPORATIVE COOLERS
MK-47 Mineral Treatment keeps minerals in
solution preventing build-up on evaporative media.
KUULAIRE PORTABLE
EVAPORATIVE COOLERS
• Automatic wing louvers, timer and remote
control, high efficiency rigid media
• For indoor use
PART NO.
DESCRIPTION
PACKA77
600 sq ft cooling capacity, 8 gallon water capacity,
55 lbs, 2 speed settings
PACKA55
400 sq ft cooling capacity, 8 gallon water capacity,
35 lbs, 3 speed settings
REPLACEMENT PUMPS
PART NO.
DESCRIPTION
PUMP-CYCLONE For PAC2KCYC01
PUMP-0150-1
For PAC163SVT
PUMP-016-4R
For PAC2K36HPVS and PAC2K482S
60
TRUPER Code: 559
Website: www.truper.com
TOOLS AND EQUIPMENT
Part #30478
Part #32401
POLY HEAD LEAF
RAKE
Part #32400
LANDSCAPE RAKES
AND ASPHALT LUTE
STEEL TINE LEAF RAKE
• Flexible steel tines
• 48” and 54” wood and
fibreglass handles
• Durable poly head
• 36”, 48” and 56” handles
• Rugged aluminum head
• 66” aluminum handles
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
30478
30" head, 36" comfort grip
30451
22" head, 36" comfort grip
32400
36" head landscape rake
30463
24" head, 36" comfort grip
30452
22" head, 48" wood handle
33022
30" head landscape rake
30456
22" head, 48" wood handle
30480
24" head, 54” wood handle
33053
24" head landscape rake
33655
26" head, 56" steel handle
32401
26" head, 54" fibreglass handle
33104
36" head asphalt lute
Part #31380
Part
#33105
ROAD RAKES
AND BOW RAKES
• Forged or HD
steel head
• 60” fiberglass or
wood handles
Part #30299
Part
#30314
Part #30030
BARN AND
SPADING FORKS
HOES,
SCRAPERS
AND
CULTIVATORS
• Forged or welded heads
• Fibreglass or wood handles
• Forged or welded heads
• Fibreglass or wood handles
Part
#30012
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
31391
16 tines, 1 1/4" fibreglass road rake
30314
5 tine manure fork, 54" ash handle
30012
33105
14 tines, 1/2" shank asphalt rake
30323
5 tine manure fork, 50" fibreglass
33039
6" welded head hoe, 54" wood handle
31380
16 tines, fibreglass bow rake
30330
10 tine ensilage fork, 30" D-handle
31754
7" forged ice scraper, 48" ash handle
31374
16 tines, ash handle bow rake
30299
4 tine spading fork, 30” fiberglass
D-handle
30030
4 tine cultivator, 60" fibreglass handle
Part #30957
Part #30528
6" forged head hoe, 60" fibreglass
Part #30206
Part #30931
Part #30942
AXES AND
SPLITTING MAULS
HD hickory handles or double injected
fibreglass handles for overstrike protection.
TRUPER
61
ENGINEER AND
SLEDGE HAMMERS
HD double injected fibreglass handles for
increased strength and overstrike protection.
Also available in hickory.
PINCH BARS AND
WRECKING BARS
Part
#30159
Drop forged and tempered for
superior strength during prying and digging.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
30514
1 1/4 lb camp axe, 14" hickory handle
30942
3 lb cross pein hammer, 15" handle
30262
2 lb, 15" cat's paw utility bar
30518
2 1/4 lb boy's axe, 28" hickory handle
30927
4 lb engineer hammer, 15" handle
30206
3 1/4 lb, 3/4" x 24" hex wrecking bar
30528
3 1/2 lb Michigan axe, 33" fibreglass
30929
8 lb sledge hammer, 34" handle
30156
12 lb, 51" pinch point steel bar
12 lb sledge hammer, 34" handle
30159
18 lb, 60" pinch point steel bar
30957
6 lb splitting maul, 36" fibreglass
30931
TRUPER Code: 559
Website: www.truper.com
PROFESSIONAL GRADE,
FIBREGLASS HANDLE SHOVEL
31198
48” fibreglass handle,
round point shovel
31199
48” fibreglass handle,
square point shovel
31200
29” fibreglass D-handle,
round point shovel
31201
29” fibreglass D-handle,
square point shovel
Part #31198
Part
#31199
31207
48” wooden handle,
round point shovel
31208
48” wooden handle,
square point shovel
31209
30” wooden D-handle,
round point shovel
31210
30” wooden D-handle,
square point shovel
Part #31208
Part
#31209
33659
48” wooden handle,
round point shovel
33661
48” wooden handle,
square point shovel
33670
30” wooden
D-handle, round point
shovel
33671
30” wooden
D-handle, square
point shovel
Part #31347
Part #31343
PROFESSIONAL
GRADE, WOODEN
HANDLE
TRENCHING
SHOVEL
PROFESSIONAL
GRADE, ROOFERS
SPADE
• 48” wooden
handle
• Wooden shovel
• 48” wooden
handle
• 4” blade
PICKS AND MATTOCKS
PROFESSIONAL GRADE, WOODEN
HANDLE, SOLID SHANK SHOVEL
PART NO. DESCRIPTION
HEAVY DUTY FIBREGLASS,
D-HANDLE SHOVEL
• 27” shovel
• #14 aluminum
scoop
PROFESSIONAL GRADE,
WOODEN HANDLE SHOVEL
PART NO. DESCRIPTION
Part #31299
Part #33661
Part
#33670
HD double injected fibreglass handles for
increased strength and overstrike protection.
Also available in wood handle.
Part #31646
Part #31638
PART NO. DESCRIPTION
31614
5 lb pick / mattock, 36" handle
31638
5 lb cutter / mattock, 36" handle
31641
5 lb railroad pick, 36" handle
31646
6 lb railroad pick, 36" handle
SINGLE TIRE
WHEELBARROW
• Contractor grade
• 10 cubic feet poly tray
• 16” dual block tires
• Contractor grade
• 6 cubic feet steel tray
• 16” block tires
Part #33181
TRUPER
DUAL TIRE
WHEELBARROW
Part #30368
TOOLS AND EQUIPMENT
PART NO. DESCRIPTION
62
SCEPTER Code: 936
Website: www.scepter.com
TOOLS AND EQUIPMENT
128/W
GAS / OIL
COMBO CAN
• 6 L / 1.58 gal gas and
2.25 L / 0.59 gal oil combo can
BATTERY BOX
• Non-corrosive high-strength plastic construction
• Complies to industry requirements
• Fits new style battery dimensions
128/
20 L VENTED
WATER CAN
DURA MAX FLO N’ GO
53 L / 14 GAL
• Portable, wheeled fuel caddy
• Includes fluid transfer siphon/pump
PART NO. DESCRIPTION
03796
Holds series 24
Batteries come with tie down strap
03797
Holds series 27, 30 & 31
Batteries come with tie down strap
MILITARY STYLE
JERRY CANS
PART NO. DESCRIPTION
03711
Model #D520, 20 L
5 gal diesel, yellow
03609
Model #RV520, 20 L
5.3 gal gas, red
SELF VENTING FUEL CANS
MAX FLO N’ GO
• High flow siphon/pump
90 L / 24 GAL
RECYCLE BIN
PART NO. DESCRIPTION
07539
Model #AB25, 25 litre
6.6 gal, gas, red
07622
Model #AB20, 20 litre
5.3 gal, gas, red
07079
Model #AB10, 10 litre
2.5 gal, gas, red
128/$
128/$
07081
Model #AB5, 5 litre
1.25 gal, gas, red
18” RIGID FUNNEL
MULTI USE FLEX FUNNEL
07649
Model #D20, 20 litre
5.3 gal, diesel, yellow
07624
Model #K20, 20 litre
5.3 gal, kerosene, blue
STANDARD FUNNELS
DRAIN PANS
FUEL CONTAINER PARTS KITS
SCEPTER
63
PART NO. DESCRIPTION
03647
Model #JCA4, includes flexible
spout, stopper and vent cap
03583
Model #JCA3, 3 piece multi-pack
08499
3 pack stopper kit
PART NO. DESCRIPTION
03587
Model #F162, 8" large
03589
Model #F163, 6" medium
03588
Model #F164, 4" small
PART NO. DESCRIPTION
03894
Model #DP184, 15L /
16 qt, oil, black
03896
Model #DP124, 7.5 L /
8 qt, oil, black
06976
Model #DP15A, 19L /
20 qt, 5 gal, antifreeze, green
BUYERS Code: 577
Website: www.buyersproducts.com
TOOL BOXES
PART NO.
H(")
D(")
1703350
14
12
24
1703300
14
16
24
1703303
14
16
30
1703305
14
16
W(")
36
1703330
16
14
18
1702300
18
18
24
1702303
18
18
30
1702305
18
18
36
1702310
18
18
48
1702315
18
18
60
1702317
18
18
66
1702325
18
18
72
1704300
24
24
24
1704303
24
24
30
1704305
24
24
36
1704310
24
24
48
1704315
24
24
60
1708310
18
24
48
WHITE UNDERBODY TOOLBOX
WITH T-HANDLE LATCH
W(")
BLACK UNDERBODY TOOLBOX
WITH ROTARY PADDLE LATCH
PART NO.
H(")
D(")
PART NO.
H(")
D(")
1702400
18
18
24
1703150
14
12
24
1702403
18
18
30
1703100
14
16
24
W(")
1702405
18
18
36
1703103
14
16
30
1702410
18
18
48
1702100
18
18
24
1702415
18
18
60
1702103
18
18
30
1702417
18
18
66
1702105
18
18
36
1708410
18
24
48
1702110
18
18
48
1703400
14
16
24
1702115
18
18
60
1703403
14
16
30
1703405
14
16
36
1704400
24
24
24
1704403
24
24
30
1704405
24
24
36
1704410
24
24
48
1704415
24
24
60
TOOLS AND EQUIPMENT
BLACK UNDERBODY TOOLBOX
WITH T-HANDLE LATCH
WHITE UNDERBODY TOOLBOX
WITH ROTARY PADDLE LATCH
PART NO.
BLACK UNDERBODY TOOLBOX
WITH T-HANDLE LATCH AND
DIAMOND TREAD DOOR
PART NO.
H(")
D(")
W(")
1703900
14
16
24
H(")
D(")
W(")
1702900
18
18
24
1702500
18
18
24
1702905
18
18
36
1702505
18
18
36
1702910
18
18
48
1702510
18
18
48
D(")
W(")
18
18
24
1702203
18
18
30
1702205
18
18
36
1702210
18
18
48
1702215
18
18
60
1703203
14
16
30
18” X 18”
UNIVERSAL
UNDERBODY
MOUNTING
BRACKETS,
ALUMINUM,
WELDED BRACES
BUYERS
PART NO.
PRIMED UNDERBODY TOOLBOX
WITH T-HANDLE LATCH
H(")
1702200
64
BUYERS Code: 577
Website: www.buyersproducts.com
WHEEL CHOCKS
TRAILER, TOWING AND ACCESSORIES
BUYERS
65
ALUMINUM
WHEEL CHOCK
6” X 7” X 5.25”
28,000 LB CAPACITY
ALUMINUM
WHEEL CHOCK
6.25” X 12.25” X 57”
55,000 LB CAPACITY
ALUMINUM
WHEEL CHOCK
8.5” X 15” X 8.25”
70,000 LB CAPACITY
EXTRUDED ALUMINUM
WHEEL CHOCK
6” X 8.75” X 5.86”
EXTRUDED ALUMINUM
WHEEL CHOCK
7” X 10.75” X 7.8”
GALVANIZED
WHEEL CHOCK
9” X 10” X 6”
'
ORANGE POWDER
COATED STEEL WHEEL
CHOCK 9” X 10” X 6”
YELLOW COMPOSITE
WHEEL CHOCK SET
WITH ROPE
RUBBER WHEEL
CHOCK SET
WITH ROPE
BLACK POLY
WHEEL CHOCK
RUBBER WHEEL CHOCKS
POLY WHEEL CHOCKS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
WC1467A
Rubber wheel chock, 5” x 6” x 5”
WC786
7.38" x 8.31" x 6.25"
WC1468A
Rubber wheel chock, 8” x 6” x 5”
WC8118
8.69" x 11.25" x 8.13"
WC796R
Rubber wheel chock with chain eye, 9.5” x 7” x 7”
BUYERS Code: 577
Website: www.buyersproducts.com
ROPE RINGS
RECESSED ROPE RING
RECESSED ROPE RING
• Requires 3” dia. mounting hole in
3/8” or thicker material
• WLL 285 lb; UBS 850 lb
• Requires 3” dia. mounting hole in
1/4” or thicker material
• WLL 265 lb; UBS 800 lb
RECESSED OR
SURFACE MOUNT
ROPE RING
ROPE RING WITH
FORGED BRACKET
• WLL 800 lb; UBS 2,400 lb
• WLL 265 lb; UBS 800 lb
SURFACE MOUNT
ROPE RING
SURFACE MOUNT
ROPE RING
SURFACE MOUNT
ROPE RING
SURFACE MOUNT
ROPE RING
• WLL 265 lb; UBS 800 lb
• WLL 500 lb; UBS 1,500 lb
• WLL 800 lb; UBS 2,400 lb
• 1,000 lb; UBS 3,000 lb
$
LIGHT-DUTY SURFACE
MOUNT ROPE RING
LIGHT-DUTY SURFACE
MOUNT ROPE RING
• Bulk Packaging
• WLL 400 lb; UBS 1,200 lb
• Retail Packaging
• WLL 400 lb; UBS 1,200 lb
SURFACE MOUNT
ROPE RING WITH
BOLT-ON BRACKET
SURFACE MOUNT
ROPE RING WITH
INTEGRAL BRACKET
$
HEAVY-DUTY ROPE RING
WITH WELD-ON BRACKET
HEAVY-DUTY RECESSED
ROPE RING
HEAVY-DUTY RECESSED
ROPE RING
• WLL 2,000 lb; UBS 6,000 LB
• Bulk Packaging
• WLL 2,000 lb; UBS 6,000 lb
• Retail Packaging
• WLL 2,000 lb; UBS 6,000 lb
HEAVY-DUTY
RECESSED ROTATING
ROPE RING
TRAILER, TOWING AND ACCESSORIES
• WLL 2,000 lb; UBS 6,000 lb
BUYERS
• WLL 2,000 lb; UBS 6,000 lb
66
BUYERS Code: 577
Website: www.buyersproducts.com
SNOW PLOW PARTS
TRAILER, TOWING AND ACCESSORIES
BUYERS
67
12 V REVOLVING
SAFETY LIGHT
12 V MINI
STROBE LIGHT
QUARTZ HALOGEN
MINI LIGHT BAR
WALK BEHIND ROTARY
SALT SPREADER
&*!+
&*!
&
SUV PRO-TAILGATE
SPREADER
SUV TAILGATE
SPREADER
TAILGATE
SPREADER
FLOURESCENT
ORANGE
MARKER KIT
PART NO. DESC.
ORANGE
DRIVEWAY
MARKERS
YELLOW
DRIVEWAY
MARKERS
RED BLADE
GUIDE KIT,
REPLACES
WESTERN
YELLOW BLADE
GUIDE KIT,
REPLACES
MEYER
PLOW SHOE
ASSEMBLY,
REPLACES
WESTERN
PLOW SHOE
ASSEMBLY,
REPLACES
MEYER
TRIP SPRING,
REPLACES
WESTERN
TRIP SPRING,
REPLACES
MEYER
LOW-TEMP
HYDRAULIC
FLUID
1308105
28”
1308110
36”
HOPKINS MANUFACTURING Code: 529
Website: www.hopkinsmfg.com, www.hopkinstowingsolutions.com
,
MULTI-TOW
7:4 ADAPTER
SNOW AND ICE TOOLS
BREAKAWAY SWITCH
WITH 7” WIRE
PART NO. DESCRIPTION
16721
10" Ice Scraper, 24 Pack
19520
22" Super Snowbrush
13781
35" Blizzard Snowbrush
2610XB
48" Extender Snowbroom
HOT SPOT WARMERS
PART NO. DESCRIPTION
12324
Hand, 24 pack,
10 hours heat
12360
Toe, 24 pack, 8 hours heat
4 WIRE FLAT TO 7
RV CONNECTOR
4 WIRE FLAT
EXTENSION
7 POLE RV BLADE END
PART NO. DESCRIPTION
48505
Trailer
48485
Vehicle
BRAKE CONTROLS
TRAILER, TOWING AND ACCESSORIES
MULTI-TOW 7 RV TO 6,5,4
PART NO. DESCRIPTION
Brake-Force Time Based
47294
Agility Plug-In
47235
Impulse Time Based
7 RV BLADE TO 4 FLAT
HOPKINS
47225
68
ERICKSON MFG. Code: 447
Website: www.ericksonmfg.com
RETRACTABLE RATCHET STRAPS
TRAILER, TOWING AND ACCESSORIES
Erickson Retractable Ratchet Straps are “The Next Generation in Tie-Downs”
• Simply pull the web out to the desired length and start ratcheting until tight
• Only required webbing is extended which means no
PART NO. DESCRIPTION
excess webbing blowing in the wind
34413
2 pack, 1" x 6'
• To release push the red release button, webbing
retracts, stores neatly, eliminates tangled mess
34415
2 pack, 1" x 10'
• 2 pack, 1”x10’, 1,200 lb max. capacity, 400 lb WWL
34414
2 pack, 2" x 6'
TIE DOWN TAMER
2" x 27’ with flat hook. Stores excess webbing
once the load has been secured on a patented
storage reel in the handle. Place the end of the
excess web in the slot of the handle, wrap it up
and lock it tight. Meets D.O.T. requirements.
HEAVY DUTY 1” RATCHET STRAPS
LOADING RAMPS
51314
1" x 15', 3,000 lb, double "J" hooks
07440
11" x 90" Arched bi-fold aluminum sold individually, capacity 750 lb
01326
1" x 25', 3,000 lb, double "J" hooks
07450
11" x 90" Arched aluminum sold as a pair, capacity 1,500 lb
07460
49" x 69" Tri-fold aluminum, capacity 1,500 lb
07464
11" x 84" Bi-fold steel mesh tread sold individually, capacity 800 lb
07473
9” x 80" Straight steel sold as a pair, capacity 1,000 lb
07484
54" x 84" Tri-Fold aluminum combination ATV/snowmobile, capacity 1,500 lb
HEAVY DUTY 2” & 3” RATCHET STRAPS
PART NO. DESCRIPTION
SILVER HEAVY DUTY TARPS
52300
2" x 15', 3,000 lb, double "J" hooks
PART NO. DESCRIPTION
52400
2" x 25', 3,000 lb, double "J" hooks
57021
14 x 14 weave 8' x 10'
58527
2" x 27', 3,000 lb, flat hooks
57022
14 x 14 weave 10' x 14'
58627
2" x 27', 3,000 lb, double "J" hooks
57023
14 x 14 weave 12' x 18'
58727
2" x 27', 3,000 lb, grade 70 chain lead and grab hooks
57024
14 x 14 weave 12' x 20'
58500
2" x 30', 3,000 lb, flat hooks
57025
14 x 14 weave 16' x 20'
58510
2" x 30', 3,000 lb, double "J" hooks
57026
14 x 14 weave 20' x 30'
58540
2" x 40', 3,000 lb, flat hooks
57027
14 x 14 weave 30' x 40'
58514
3" x 30', 13,000 lb, flat hooks
57028
14 x 14 weave 30' x 40'
58515
3" x 30', 13,000 lb, double "J" hooks
57029
14 x 14 weave 40' x 60'
58516
3" x 30', 13,000 lb, grade 70 chain lead and grab hooks
BLUE POLY TARPS
ERICKS
SON MFG.
69
PART NO. DESCRIPTION
PART NO. DESCRIPTION
CAMO TARPS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
57000
8 x 8 weave 6' x 8'
57004
8 x 8 weave 8' x 10'
57001
8 x 8 weave 8' x 10'
57005
8 x 8 weave 10' x 12'
57006
8 x 8 weave 10' x 12'
57007
8 x 8 weave 12' x 16'
57008
8 x 8 weave 12' x 18'
PART NO. DESCRIPTION
57009
8 x 8 weave 16' x 20'
06701
9" EPDM rubber
57010
8 x 8 weave 18' x 24'
06702
15" EPDM rubber
57011
8 x 8 weave 20' x 30'
06703
21" EPDM rubber
57013
8 x 8 weave 30' x 50'
06704
31" EPDM rubber
57014
8 x 8 weave 40' x 60'
06741
41" EPDM rubber
TARP STRAPS
NUVUE PRODUCTS LTD. Code: 935
Website: www.nuvueproducts.com
•
•
•
•
Red/White Reflective Tape
3" x 60" roll
For automotive use
Increases visibility to
potential hazards
REFLECTIVE,
ADHESIVE
TAPE, DIE-CUT
RECTANGULAR
STRIPS
• High intensity prismatic reflective tape
• 1-1/2” wide x 4-1/2” long strips
BARREL STRIPE
REFLECTIVE TAPE
PART NO. DESCRIPTION
2617
White reflective
2627
Red reflective
2637
Blue reflective
2647
Amber reflective
•
•
•
•
Red/white
2” wide x 6’ long roll
Draws high visibility day or night
Ideal for marking hazards around the
work place or on trailers and equipment
Size: 1-1/2” x 4-1/2”, 2 pieces per package
DOT-C2 REFLECTIVE SAFETY TAPE
•
•
•
•
•
Red/White Reflective Tape
Meets Department of Transportation specifications
Required on commercial trucks and trailers
Sticks to any clean smooth surface
Typical brightness 800 candle power
HIGH INTENSITY REFLECTIVE
TAPE, 4’ OR 8’ ROLLS
• All purpose
• Ensures maximum reflectivity
• Provides highest possible visibility
to avoid hazards
• Pressure sensitive, adheres well
to any smooth, clean surface
PART NO. DESCRIPTION
2612
4' long x 1.5"
wide, white
2" wide x 12" roll (6" red/6" white),
4 strips / 12" each per pack
2613
8' long x 1.5"
wide, white
2" wide x 36" roll
(7" white / 11" red, repeating pattern)
2622
2603
4' long x 1.5"
wide, red
2" wide x 25' roll
(7" white / 11" red, repeating pattern)
2623
2606
8' long x 1.5"
wide, red
PART NO. DESCRIPTION
2600
46” FIBREGLASS
DRIVEWAY MARKERS
• 46” fibreglass driveway markers with
acrylic reflective tops
• Choice of red or blue
• Includes foot spike for inserting into
hard packed surfaces
• Won’t scratch, rust, bend or break
• 3-1/4” top with 1/4” diameter rod
PART NO. DESCRIPTION
Red
2662
Blue
• 46” white powder coated aluminum
channel marker
• Highly reflective red tape at top,
both sides
• Can use as a driveway marker or can add
3” black vinyl numbers to mark street
address, parking space numbers, etc.
PART NO. DESCRIPTION
2668
46” white aluminum
address post / marker.
Includes 3” black vinyl
number kit.
46” HEAVY-DUTY,
DUAL-MOUNT AND
DUAL-COLOUR FIBREGLASS
DRIVEWAY MARKERS
• 46” heavy duty model, 3-3/4” top with
5/16” diameter rod
• Optional side mount capability
• White flexible fiberglass shaft that resists
breakage even in extreme conditions
• Choice of red/white or blue/white to
differentiate your driveway from others
• UV protected PMMA reflex reflector top
won’t fade, crack or weather
• Unique ground spike design that installs
easily, even in to hard packed surfaces
• Won’t scratch, rust, bend or break
46” - 72” TELESCOPIC,
360º REFLECTIVE MARKERS
• Flexible fiberglass shaft that extends from
46” to 72” in overall height
• Locking screw that allows for custom height
adjustments
• Over-sized, highly reflective 2-color reflector top
that is visible from 360º
• Coated steel ground spike that installs easily,
even in to hard packed surfaces
• UV protected PMMA reflex reflector top
won’t fade, crack or weather
PART NO. DESCRIPTION
PART NO. DESCRIPTION
2663
Red / White
2665
Red / White
2664
Blue / White
2666
Blue / White
NUVUE
2661
46” WHITE ALUMINUM
ADDRESS POST /
MARKER
TRAILER, TOWING AND ACCESSORIES
"NEW"
REFLECTIVE
BARRICADE TAPE
70
ANCRA Code: 880
Website: www.ancra.com
Online Catalogue: www.ancra.com/truck/cargosolutions.asp
ALL ANCRA INTERNATIONAL PRODUCTS ARE MARKED AND/OR TAGGED TO
COMPLY WITH THE NSC-10 AND FMCSA CARGO SECUREMENT LEGISLATIONS.
TRAILER, TOWING AND ACCESSORIES
WINCH STRAP - DELTA HOOKS
WINCH STRAP - FLAT HOOKS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
43795-11-30
4" x 30' with delta ring
43795-10-30
4" x 30' with flat hook
41660-14-30
3" x 30' with chain anchor
43795-11-35
4" x 35' with delta ring
43795-10-35
4" x 35' with flat hook
43795-15-30
4" x 30' with chain anchor
43795-11-40
4" x 40' with delta ring
43795-10-40
4" x 40' with flat hook
43795-11-50
4" x 50' with delta ring
43795-10-50
4" x 50' with flat hook
RATCHET STRAP - WIRE HOOKS
RATCHET STRAP - FLAT HOOKS
RATCHET STRAP - CHAIN ANCHORS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
45982-42
27' ratchet strap with wire hooks
45982-10
27' ratchet strap with flat hooks
45982-15
27' ratchet strap with chain anchors
45982-43
30' ratchet strap with wire hooks
45982-11
30' ratchet strap with flat hooks
45982-34
30' ratchet strap with chain anchors
X-TREME WEBBING OFFERS GREATER PERFORMANCE, DURABILITY AND ABRASION RESISTANCE
X-TREME STRAP - DELTA RINGS
X-TREME STRAP - FLAT HOOKS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
43795-91-30
4" x 30' with delta ring
41660-90-30
3" x 30' with flat hook
43795-91-40
4" x 40' with delta ring
43795-90-30
4" x 30' with flat hook
43795-90-40
4" x 40' with flat hook
X-TREME RATCHET STRAP FLAT HOOKS
PART NO. DESCRIPTION
45982-90-27
27' ratchet strap with flat hooks
45982-90-30
30' ratchet strap with flat hooks
X-TREME STRAP - CHAIN ANCHORS
PART NO. DESCRIPTION
41660-93-30
3" x 30' with chain anchor
43795-95-30
4" x 30' with chain anchor
X-TREME RATCHET STRAP CHAIN ANCHORS
PART NO. DESCRIPTION
45982-93-30
30' ratchet strap with chain anchors
X-SERIES RATCHET STRAPS
PART NO. DESCRIPTION
General Purpose, HD, Motorsports and Industrial Straps.
SL125
Ratcheting cargo bar for pickup and SUV
XC005-1P
3' Trunk tie
XR015-C1P
15' GP camo ratchet strap with vc s hooks - 1 pack
XR115-C2P
15' HD camo ratchet strap with vc s hooks & safety clips - 2 pack
XR015-4P
15' GP ratchet strap with vc s hooks - 4 pack
XR108-2P
8' HD motorsports strap with vc s hooks & safety clips - 2 pack
XR210-1P
10' IND power equipment strap with twisted snap hooks - 1 pack
XR320-1P
20' IND contractors strap with j hooks and d-ring - 1 pack
ANCRA
71
WINCH STRAP - CHAIN ANCHORS
,
,
,
ANCRA Code: 880
Website: www.ancra.com
Online Catalogue: www.ancra.com/truck/cargosolutions.asp
ALL ANCRA INTERNATIONAL PRODUCTS ARE MARKED AND/OR TAGGED TO
COMPLY WITH THE NSC-10 AND FMCSA CARGO SECUREMENT LEGISLATIONS.
RUBBER TARP TIE
PART NO. DESCRIPTION
PART NO. DESCRIPTION
42313-10
Standard, painted black
52210
50 per box, 9"
42313-12
Combination box end
52215C
50 per box, 15"
42313-19
Combination chrome
52221C
50 per box, 21"
50015-10
Standard ergo winch bar
52231
50 per box, 31"
50015-20
Combination ergo winch bar
52241
50 per box, 41"
50015-21
Box end ergo winch bar
STRAP ASSEMBLY
G70 CHAIN IN A PAIL
PART NO.
DESCRIPTION
PART NO. DESCRIPTION
45881-10-16-SP
5/16" x 16' with clevis hooks 4,700 lb WLL
95001
2pk, 1" cam buckle-8' with vinyl s-hooks
45881-10-20-SP
5/16" x 20' with clevis hooks 4,700 lb WLL
95002
2pk, 1" ratchet buckle-10' with vinyl s-hooks
45881-10-25-SP
5/16" x 25' with clevis hooks 4,700 lb WLL
95003
2pk, retractable ratchet bkl-6' with vinyl s-hks
45881-11-16-SP
3/8" x 16' with clevis hooks 6,600 lb WLL
95004
4pk, 1" cam buckle-8' with vinyl s-hooks
45881-11-20-SP
3/8" x 20' with clevis hooks 6,600 lb WLL
95005
4pk, 1" ratchet buckle-10' with vinyl s-hooks
45881-11-25-SP
3/8" x 25' with clevis hooks 6,600 lb WLL
95006
4pk, 2" cam, 2 ratchet with vinyl s-hooks
95007
2pk, ratchet buckle-152 endless
WEB WINCH
LOAD BINDER
TRAILER, TOWING AND ACCESSORIES
WINCH BAR
MINI RATCHET STRAP
PART NO.
DESCRIPTION
PART NO. DESCRIPTION
43579-20
Side mount-low profile
45943-10
5/16" Lever 5,400 lb WLL
43887-10
1" X 16'-display packaged
43564-16
Bottom mount-std. Portable w/2ss
45943-11
3/8" Lever 9,200 lb WLL
43887-11
1" X 20'-display packaged
43565-12
Sliding deep storage bottom mount
45943-14
Recoiless - 5/16" Lever 5,400 lb WLL
45943-20
5/16" Ratchet 5,400 lb WLL
45943-21
3/8" Ratchet 9,200 lb WLL
ANCRA
PART NO. DESCRIPTION
72
ANCRA Code: 880
Website: www.ancra.com
Online Catalogue: www.ancra.com/truck/cargosolutions.asp
ALL ANCRA INTERNATIONAL PRODUCTS ARE MARKED AND/OR TAGGED TO
COMPLY WITH THE NSC-10 AND FMCSA CARGO SECUREMENT LEGISLATIONS.
TRAILER, TOWING AND ACCESSORIES
CORNER PROTECTORS
QUICK LINKS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
43986-10
4” Plastic
50016-25
1/4”, 800 lbs WLL
49377-10
Steel for chain
50016-31
5/16”, 1,200 lbs WLL
50016-38
3/8”, 1,700 lbs WLL
SLIP HOOKS G70 –
NO LATCH
SLIP HOOKS G70 –
WITH SAFETY LATCH
PART NO. DESCRIPTION
PART NO. DESCRIPTION
50019-20
1/4”, 2,750 lbs WLL
50019-10
1/4”, 2,750 lbs WLL
50019-21
5/16”, 4,300 lbs WLL
50019-11
5/16”, 4,300 lbs WLL
50019-22
3/8”, 5,250 lbs WLL
50019-12
3/8”, 5,250 lbs WLL
50019-23
1/2”, 9,000 lbs WLL
50019-13
1/2”, 9,000 lbs WLL
TWIN CLEVIS G70
CLEVIS HOOKS G70
PART NO. DESCRIPTION
PART NO. DESCRIPTION
45946-10
5/16”
50017-10
5/16”, 4,700 lbs WLL
45946-11
3/8”
50017-11
3/8”, 6,600 lbs WLL
50017-12
7/16”, 11,300 lbs WLL
ROUND SLINGS
NYLON TWISTED
EYE TO EYE SLINGS
PART NO. DESCRIPTION
PART NO.
DESCRIPTION
20-ENR2X3
2” x 3’
20-EE2-9802X8
2” x 3’
20-ENR2X4
2” x 4’
20-EE2-9802X10
2” x 4’
20-ENR2X8
2” x 8’
20-EE2-9802X12
2” x 8’
20-ENR2X12
2” x 12’
20-EE2-9802X16
2” x 12’
20-ENR2X20
2” x 20’
20-EE2-9802X20
2” x 20’
ANCHOR SHACKLES
ANCRA
73
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
50013-31
5/16” screw pin, 1,500 lbs WLL
50013-75
3/4” screw pin, 9,500 lbs WLL
50013-38
3/8” screw pin, 2,000 lbs WLL
50014-50
1/2” clevis pin, 4,000 lbs WLL
50013-44
7/16” screw pin, 3,000 lbs WLL
50014-63
5/8” clevis pin, 6,500 lbs WLL
50013-63
5/8” screw pin, 6,500 lbs WLL
CANTECH TAPE Code: 111
Website: www.cttgroup.com
HIGH PERFORMANCE
AUTOMOTIVE
MASKING TAPE
• For lightweight packages
• Holding and bundling applications
PART NO. DESCRIPTION
263-00-48100 48 mm x 100 m
263-00-4866
48 mm x 66 m
263-00-72132 72 mm x 132 m
263-00-7266
72 mm x 66 m
263-00-9666
96 mm x 66 m
PART NO. DESCRIPTION
946-60-2425
969-60-2425
Clear multi pack:
6 clear rolls
975-01-2425
Black roll 24 mm x 25 mm
975-10-2425
White roll 24 mm x 25 mm
979-25-2425
Clear roll 24 mm x 25 mm
GENERAL
PURPOSE
DUCT TAPE
• Coloured duct tape
(8 colours available)
94-01-4855
Black 48 mm x 55 m
94-02-4855
Red 48 mm x 55 m
94-03-4855
Brown 48 mm x 55 m
94-05-4855
Yellow 48 mm x 55 m
94-07-4855
Green 48 mm x 55 m
94-08-4855
Blue 48 mm x 55 m
94-10-4855
White 48 mm x 55 m
94-19-4855
Olive 48 mm x 55 m
202-21-48110 Silver 48 mm x 110 m
111-00-1855
18 mm x 55 mm
202-21-4855 Silver 48 mm x 55 m
111-00-3655
36 mm x 55 m
202-21-72110 Silver 72 mm x 110 m
111-00-4855
48 mm x 55 m
SELF FUSING SILICONE TAPE
•
•
•
•
•
•
•
•
•
Meets UL 510 requirements
Pipe wrap for corrosion and dirt
“Final Wrap” for electrical distribution connections
Salt water resistant wrap in
marine, boating
Protective and colour
coding wrap
Hydraulic fitting protection
Emergency hose/pipe repair
Electrical insulation - 400 volts
Resists to a minimum of 700 PSI
PART NO.
DESCRIPTION
537-2001-2451096 Black 20 mil x 25.4 mm x 10.96 m
TUCK TAPE
• Tuck tape CCMC approved
for house wrap
• For bonding to insulation,
house wrap insulation
and other materials
• 60 mm x 66 m
Black 20 mil x 38 mm x 10.96 m
537-3001-2451096 Black 30 mil x 25.4 mm x 10.96 m
537-3001-5081096 Black 30 mil x 50.8 mm x 10.96 m
ECONOMY GRADE
POLY CLOTH
DUCT TAPE
• Excellent for all
sealing applications
• General repair tape
PART NO. DESCRIPTION
93-21-4855
48 mm x 55 m
93-21-7255
72 mm x 55 m
93-21-9655
96 mm x 44 m
ALUMINUM FOIL TAPE
• Join and seal duct work
and duct insulation
PART NO. DESCRIPTION
90-21-4845
48 mm x 45 m
90-21-7290
72 mm x 90 m
537-2021-2451096 Gray 20 mil x 25.4 mm x 10.96 m
537-2021-381096
Gray 20 mil x 38 mm x 10.96 m
537-3021-2451096 Gray 30 mil x 25.4 mm x 10.96 m
ELECTRICAL TAPE
537-3021-5081096 Gray 30 mil x 50.8 mm x 10.96 m
• CSA/UL approved for
indoor use (-7ºC to 80ºC)
• Used for electrical splicing
• Additional colours available
GENERAL PURPOSE
MASKING TAPE
• Mulit-purpose
• For light bundling, packaging
and shelf identification
PART NO. DESCRIPTION
107-00-2455
24 mm x 55 m
107-00-3655
36 mm x 55 m
107-00-4855
48 mm x 55 m
2” TAPE
DISPENSER
• 2” adjustable
tension handheld
tape dispenser
CANTECH
Black 48 mm x 55 m
PART NO. DESCRIPTION
537-2001-381096
PART NO. DESCRIPTION
202-01-4855
202-01-72110 Black 72 mm x 110 m
HOCKEY TAPE
Mixed multi pack:
2 black, 1 white,
3 clear
A closure system for sealing
flexible air ducts, air connectors,
metal ducts and foam insulation
used for water pipe connections.
• Alternative to aluminum
foil tape
• Resistant to mold, moisture,
flame and
smoke
PART NO. DESCRIPTION
• No liner
202-01-48110 Black 48 mm x 110 m
TRAILER, TOWING AND ACCESSORIES
ECONOMY GRADE
BOX SEALING
• Used for critical OEM and
industrial applications
• Provides masking and
protection for aircraft,
automotive, truck, bus, military,
shipyards, boatmakers, railway,
and RV’s
• Conforms well to all shapes
• Adheres well to all types of surfaces
• Great “tape-on-tape” performance
• Removes cleanly on all surfaces including moulding
and rubber
• Compatible with water and solvent based paint
FLEXIBLE
DUCT TAPE
- UL-181B-FX
LISTED
74
NUERA TRANSPORT Code: 888
Website: www.nuera-transport.com
TRAILER, TOWING AND ACCESSORIES
NUERA TRA
ANSPORT
75
SUSPENSION COMPONENTS
BEARING KITS, CAPS AND SEALS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
55-27225
Shackle Straps - 3.12" Centers
55-27005
55-27230
Shackle Straps - 2.25" Centers
55-27010
2K Bearing Kit (1" BT8 Spindle)
55-27235
Shackle Straps - 2.56" Centers
55-27015
3.5K Bearing Kit E-Z Seal
55-27240
Shackle Bolts - 9/16" X 3"
55-27020
5.2K Bearing Kit 2.125" E-Z Seal
55-27242
Shackle Bolts - 9/16" X 3" ZerK
55-27025
5.2K Bearing Kit 2.250" E-Z Seal
55-27245
Shackle Bolts - 9/16" X 3.5"
55-27030
55-27250
Shackle Bolts - 7/8" X 4.62" ZerK
55-27255
Shackle Bolts - 3/4" X 3.5" ZerK
55-27260
55-27265
2K Bearing Kit (1-1/16" Spindle)
BRAKE REPAIR / REPLACEMENT
COMPONENTS
PART NO. DESCRIPTION
55-27450
Magnet Kit For 10" Trailer Brakes 3.5K
55-27451
Magnet Kit for 12" Trailer Brakes 5.2-6K
55-27452
Magnet Kit for 12" Trailer Brakes 7K
6KL/UTG Bearing Kit
2.125" E-Z Seal
55-27325
Trailer Brake Spring and Adjuster
Kit - 2K
55-27035
6KL/UTG Bearing Kit
2.250" E-Z Seal
55-27330
Trailer Brake Spring and Adjuster
Kit - 3.5-7K
Nylon Bushings - 9/16" X 1.75"
55-27040
4.5K MHU Bearing Kit 10-40 Seal
Nylon Bushings - 9/16" X 2"
55-27340
55-27045
7K Bearing Kit 2.125" E-Z Seal
Trailer Brake Adjuster Screw
and Lever Kit Left - 8-15K
55-27270
2K U-Bolt Kit - 1-3/4" X 4.25"
55-27050
7K Bearing Kit 2.250" E-Z Seal
55-27345
Trailer Brake Adjuster Screw
and Lever Kit Right - 8-15K
55-27275
3.5K U-Bolt Kit - 2-3/8" X 5.50"
55-27060
2-3.5K Grease Caps 1.99" O.D.
55-27280
2K U-Bolt Kit - 1-3/4" X 4.25"
55-27350
Trailer Brake Wheel Cylinder Single
Servo Left - 3.5-5.2K
55-27285
5.2-7K U-Bolt Kit - 2" X 6"
55-27065
2-3.5K Grease Caps
1.99" O.D. E-Z Plug
55-27355
55-27070
5.2K-6Kl Grease Caps
2.44" O.D.
Trailer Brake Wheel Cylinder Single
Servo Right - 3.5-5.2K
55-27290
Light Duty Marine U-Bolt Kit 2' X 1/2" X 4.5"
55-27360
55-27300
2K Tie Plates - 1-3/4" Tube
Trailer Brake Wheel Cylinder Dual
Servo Left - 3.5-5.2K
55-27075
55-27305
3.5K Tie Plates - 2-3/8" Tube (II)
5.2K-6Kl Grease Caps
2.44" O.D. E-Z Plug
55-27365
3.5K Tie Plates - 2-3/8" Tube (SS)
5.2K-7K Grease Caps 2.72" O.D.
Trailer Brake Wheel Cylinder Dual
Servo Right - 3.5-5.2K
55-27310
55-27080
55-27315
5.2-7K Tie Plates - 3" Tube (II)
55-27085
5.2K-7K Grease Caps
2.72" O.D. E-Z Plug
55-27430
Electric Brake Shoe and Lining Kit
(3.5K - 10")
55-27320
5.2-7K Tie Plates - 3" Tube (SS)
55-27090
2-3.5K Grease Caps 1.99" O.D.
55-27435
55-27286
Square U-Bolt Kit 2.5" X 5.5" X 1/2"
Electric Brake Shoe and Lining Kit
(5.2K-6Kl - 12")
55-27094
10KGD/9K Oil Cap, O-Ring & PLug
55-27095
10K-15K Oil Cap, O-Ring & PLug
55-27440
Electric Brake Shoe and Lining Kit
(7K - 12")
55-27100
2K EZ Grease Seals
1.98"OD X 1.50” ID
55-27400
Electric Trailer Brake Left 10" (3.5K)
55-27105
2K EZ Grease Seals
1.98"OD X 1.25" ID
55-27401
Electric Trailer Brake Right 10" (3.5K)
55-27110
3.5K EZ Grease Seals
2.56"OD X 1.72" ID
55-27410
Electric Trailer Brake Left 12" (5.2-6K)
55-27115
5.2-7K Grease Seals
3.38"OD X 2.125"ID
55-27411
Electric Trailer Brake Right 12" (5.2-6K)
55-27120
5.2-7K EZ Grease Seals
3.38"OD X 2.25" ID
55-27420
Electric Trailer Brake Left 12" (7K)
55-27130
Bearing Protectors 1.99" (2)
55-27421
55-27135
Bearing Protectors 2.44" (2)
Electric Trailer Brake Right 12" (7K)
NUERA TRANSPORT Code: 888
Website: www.nuera-transport.com
COMPLETE HUB KITS
PART NO. DESCRIPTION
2K 440 E-Z Idler Hub Kit - 1" Spindle
55-27502
2K 440 E-Z Idler Hub Kit - 1-1/16" Spindle
55-27504
2K 545 (sm) E-Z Idler Hub Kit - 1" Spindle
55-27505
2K 545 E-Z Idler Hub Kit - Galvanized 1" Spindle
55-27506
2K 545 (sm) E-Z Idler Hub Kit - 1-1/16" Spindle
55-27507
2K 545 E-Z Idler Hub Kit - Galvanized 1-1/16" Spindle
55-27508
2K 545 E-Z Idler Hub Kit - 1-1/16" Spindle
55-27509
2K 545 E-Z Idler Hub Kit - Galvanized 1" Spindle
55-27510
2K 545 E-Z Idler Hub Kit - 1-1/16" Spindle
55-27511
2K 545E-Z Idler Hub Kit - Galvanized 1-1/16" Spindle
55-27520
3K 545 E-Z Idler Hub Kit - 1-1/16" Spindle
55-27521
3K 545 E-Z Idler Hub Kit - Galvanized 1-1/16" Spindle
55-27530
3.5K 545 E-Z Hub and Drum Kit
55-27531
3.5K 545 E-Z Hub and Drum Kit Galvanized
55-27540
5.2K 655 E-Z Idler Hub Kit - 2.25"
55-27541
5.2K 655 E-Z Idler Hub Kit Galvanized
55-27542
6KL 655 E-Z Idler Hub Kit
55-27543
6KL 655 E-Z Idler Hub Kit Galvanized
55-27544
5.2K 655 E-Z Hub and Drum Kit - 2.25" Seal
55-27545
5.2K 655 E-Z Hub and Drum Kit - Galvanized 2.25" Seal
55-27546
6KL 655 E-Z Hub and Drum Kit - 2.25"
55-27547
6KL 655 E-Z Hub and Drum Kit Galvanized
55-27549
7K 865 -1/2 E-Z Idler Hub Kit Galvanized
55-27552
7K 865 -1/2 E-Z Hub and Drum Kit
55-27553
7K 865 -1/2 E-Z Hub and Drum Kit Galvanized
WHEEL AND HUB COMPONENTS
PART NO. DESCRIPTION
Spindle Nut Kit - 1", Round Washer
55-27145
Spindle Nut Kit - 1", D-Washer
55-27150
Spindle Nut Kit - 1", Caged
55-27155
Wheel Bolts - 1/2"- 20
55-27160
Wheel Bolts - 9/16"- 18
55-27165
Wheel Bolts - 1/2"- 13, MHU
55-27170
Rim Clamps for UTG/MHU
55-27175
Lug Nuts 1/2"- 20 - 60°
55-27180
Stainless Capped Lug Nuts - 1/2"- 20 - 60°
55-27185
Lug Nuts - 9/16"- 18 - 60°
55-27190
Lug Nuts - 5/8"- 18 - 90°
55-27195
Flanged Lug Nuts - 5/8"- 18”
55-27200
Drive-in Studs - 1/2" x 1.84"
55-27205
Drive-in Studs - 1/2" x 2.5"
55-27210
Drive-in Studs - 5/8" x 3.1"
55-27215
Drive-in Studs - 1/2" x 1.81" (.550)
55-27220
Drive-in Studs - 1/2" x 1.81” (.200)
NUERA TRA
ANSPORT
55-27140
TRAILER, TOWING AND ACCESSORIES
55-27500
76
FIRESTONE INDUSTRIAL PRODUCTS Code: 217
Website: www.ride-rite.com
TRAILER, TOWING AND ACCESSORIES
• Improves handling of most light trucks,
motor homes, RVs, SUVs, and vans
• Keeps vehicle level while fully loaded
• Increases stability by absorbing road shock
• Reinforced double convoluted air springs
• A maintenance-free option to assist the
factory suspension
• Improves the ride, increases vehicle
stability and reduces sway
• Entry level load springs
• Designed to fit inside existing coil
spring suspension
• Durable, polyurethane air helper springs
• Provides variable spring rate
Visit www.ride-rite.com for a complete application listing
DESCRIPTION
PART NO.
MODEL / APPLICATION
YEAR
SUSPENSION?*
NO DRILL?**
CHEVROLET / GMC
RIDE-RITE
2250
Silverado, Sierra 2500HD, 3500 (2WD, 4WD)
01-10
Rear
Yes
WORK-RITE
8605
Silverado, Sierra 1500 (2WD, 4WD)
07-12
Rear
Yes
WORK-RITE
8635
Silverado, Sierra 2500HD, 3500 (2WD, 4WD)
11-12
Front
Yes
WORK-RITE
8632
Silverado, Sierra 2500HD, 3500 (2WD, 4WD)
11-12
Rear
Yes
SPORT-RITE
2378+++
Dakota Club Cab (2WD, 4WD)
05-11
Rear
No
RIDE-RITE
2299
Ram 3500 (4WD only)
03-12
Rear
Yes
RIDE-RITE
1004
Ram 3500 (4WD only)
03-12
Front
Yes
WORK-RITE
8621
Ram 2500 (4WD only) (not Power Wagon for LS product)
03-12
Front
Yes
WORK-RITE
8611
Ram 2500 (4WD only) (not Power Wagon for LS product)
03-12
Rear
Yes
WORK-RITE
8621
Ram 3500 (4WD only)
03-12
Front
Yes
WORK-RITE
8611
Ram 3500 (4WD only)
03-12
Rear
Yes
RIDE-RITE
2410
Tacoma (2WD only)
05-12
Rear
Yes
RIDE-RITE
2407
Tacoma (4WD only)
05-11
Rear
Yes
RIDE-RITE
2445
Tundra (2WD, 4WD)
07-12
Rear
Yes
RIDE-RITE
2403
Frontier (2WD, 4WD)
05-12
Rear
Yes
RIDE-RITE
2355
Titan (2WD, 4WD)
04-12
Rear
Yes
WORK-RITE
8601
Titan (2WD, 4WD)
04-12
Rear
Yes
RIDE-RITE
2525+
F150 (2WD, 4WD) (not Raptor or FX2)
04-12
Rear
Yes
RIDE-RITE
2550
F250 (4WD only)
08-10
Rear
Yes
RIDE-RITE
2535
F350 (4WD only), Diesel
11-12
Rear
Yes
RIDE-RITE
2550
F350 (4WD only)
11-12
Rear
Yes
RIDE-RITE
2535
F450 (4WD only)
11-12
Rear
Yes
DODGE
TOYOTA
NISSAN
FORD
FIR
RESTONE
77
GREEN=Work-Rite™ RED=Ride-Rite™ BLACK=Sport-Rite™ BLUE=Coil-Rite™ Minimum Tire to Frame Clearance Requirements: * = 7.50” + = 8.00” +++ = 6.50”
* Does this apply to the Front or Rear of Vehicle Suspension? ** Is this a No-Drill Application?
FIRESTONE INDUSTRIAL PRODUCTS Code: 217
Website: www.ride-rite.com
• A patented hybrid air-over-leaf suspension system
• The ultimate in ride control and handling
• Allows for easier loading and trailer attachment with its kneeling feature
DESCRIPTION
PART NO.
MODEL / APPLICATION
YEAR
SUSPENSION?*
NO DRILL?**
FORD (cont’d)
8616
F250 (4WD only), (not for snow plow prep.)
08-10
Front
Yes
8616
F250 (4WD only), Diesel, (not for snow plow prep.)
11-12
Front
Yes
WORK-RITE
8615
F250 (4WD only), Diesel
11-12
Rear
Yes
WORK-RITE
8615
F250 (4WD only)
08-10
Rear
Yes
WORK-RITE
8616
F350 (2WD only)
11-12
Front
Yes
WORK-RITE
8615
F350 (2WD only)
11-12
Rear
Yes
WORK-RITE
8616
F350 (4WD only), Diesel, (not for snow plow prep.)
11-12
Front
Yes
WORK-RITE
8615
F350 (4WD only), Diesel
11-12
Rear
Yes
COIL-RITE
4101
F250 (2WD only), Diesel
11-12
Front
Yes
COIL-RITE
4160
(or 4187 if snow plow prep.)
F250 (4WD only), Diesel
11-12
Front
Yes
COIL-RITE
4101
F350 (2WD only)
08-10
Front
Yes
COIL-RITE
4101
F350 (2WD only)
11-12
Front
Yes
COIL-RITE
(or 4187 if snow plow prep.)
4160
F350 (4WD only), Diesel
11-12
Front
Yes
COIL-RITE
(or 4187 if snow plow prep.)
4160
F350 (4WD only), Gasoline
11-12
Front
Yes
COIL-RITE
4101
F450 (2WD only)
11-12
Front
Yes
COIL-RITE
4160
F450 (4WD only)
11-12
Front
Yes
AIR-RITE
2538
Light Duty Air Command
Single Gauge
AIR-RITE
2491
Light Duty Electronic Air Command
Dual Gauge
AIR-RITE
2489
Remote Light Duty Air Command
Dual Gauge
AIR-RITE
2178
Air Command
Dual Gauge
AIR-RITE
2545
Electronic Air Command
Dual Gauge
AIR-RITE
2540
Remote Air Command
Dual Gauge
AIR-RITE
2219
Heavy Duty Air Command
Dual Gauge
AIR-RITE
2541
Heavy Duty Remote Air Command
Dual Gauge
AIR-RITE
AIR-RITE - Call 1-800-888-0650 for a complete listing of Air Command and Air Accessory products.
R4TECH
R4TECH - See www.ride-rite.com or call 1-800-888-0650 for a complete listing of applications.
Single gauge also available
FIR
RESTONE
WORK-RITE
WORK-RITE
TRAILER, TOWING AND ACCESSORIES
Various Air Command options depending on usage (i.e., Light, Heavy) and controller preferences (i.e., Electronic, Remote) are listed below:
GREEN=Work-Rite™ RED=Ride-Rite™ BLACK=Sport-Rite™ BLUE=Coil-Rite™ Minimum Tire to Frame Clearance Requirements: * = 7.50” + = 8.00” +++ = 6.50”
* Does this apply to the Front or Rear of Vehicle Suspension? ** Is this a No-Drill Application?
78
31 INC. Code: 184
Website: www.31inc.com
PART NO. DESCRIPTION
SIZE (IN)
SIZE
(MM)
BOX
QTY
CASE
QTY
11-808
Radial 10, 1 Ply
1 5/8 x 3
42 x 75
20
10
11-810
Radial 10, 1 Ply
2 3/8 x 3
60 x 75
20
10
11-812
Radial 12, 1 Ply
2 1/4 x 4
57 x 100
10
10
USA STYLE COI RADIAL REPAIR UNITS
11-813
Radial 12, 1 Ply
2 3/4 x 4
70 x 100
10
10
• Each reinforcing ply is individually end-wrapped to deflect tire
flexing stresses in a unique manner
• Tie-gum construction eliminates the potential for de-lamination
common in competitive products
• Designed to vulcanize chemically or in low temperature systems
• Gray vulcanizing gum, blue poly backing
11-814
Radial 14, 1 Ply
3 3/4 x 4
95 x 100
10
10
11-820
Radial 20, 2 Ply
2 7/8 x 5
72 x 125
10
6
11-822
Radial 22, 2 Ply
3x6
75 x 150
10
6
11-824
Radial 24, 2 Ply
3 x 8 1/2
75 x 215
10
6
11-825
Radial 25, 3 Ply
4 1/2 x 5
115 x 125
10
1
11-826
Radial 26, 3 Ply
3 x 11
76 x 278
10
1
BRASS VALVES
11-828
Radial 28, 3 Ply
3 x 14
76 x 355
10
1
• For steel wheels with
0.625” valve hole
• Recommended torque at
installation: 35-55 in-lb
11-835
Radial 35, 3 Ply
5 1/4 x 7
133 x 180
10
1
11-840
Radial 40, 3 Ply
4 x 7 3/8
100 x 188
10
6
11-842
Radial 42, 4 Ply
5 x 10
125 x 254
10
1
11-844
Radial 44, 4 Ply
5 x 13
125 x 330
10
1
11-845
Radial 45, 4 Ply
7 1/2 x 9 1/2
190 x 240
5
1
<68E1K=77</<878
<6/=/8@/8786:L468K1/67
1K012457<6/=/8@
PLOMBCO Code: 750
Website: www.plombco.com
31 INC. / PLO
OMBCO
LEAD ADHESIVE WHEEL
BALANCING WEIGHTS,
512: 1 OZ SEGMENTS
• 6 segments per strip
• Width: 3/4" • Length: 6"
LEAD ADHESIVE WHEEL
BALANCING WEIGHTS,
612: 2 OZ SEGMENTS
• 6 segments per strip
• Width: 1-1/4" • Length: 6"
79
THE
ULTIMATE
TRUCK
ASSORTMENT
KIT
This kit contains an array of wheel
weights to fit all highway trucks.
The pre-labeled bins are supported
on a bench mount display. Contains
a complete assortment of LT1, LT2,
CT, I-7 and TAL-S truck weights.
This system includes 24 pre-labeled
bins, 420 truck wheel weights and a
heavy duty installation/removal tool.
INCLUDES:
• 420 wheel weights
• 25 of each of LT1 and LT2
• 10 of each of CT, I-7 and TAL-S
• Installation/removal tool (PT7-UB)
• Header
• 24 plastic bins
• 1 metal floor stand
KIT 2000
PROFESSIONAL
This kit contains a wide
assortment of seven styles
of polyester-coated wheel
weights plus regular
weights for steel wheels.
The pre-labeled, colourcoded bins are supported
on a free standing floor display with descriptive
header. This kit includes 74 pre-labeled,
color-coded bins, over 2,000 wheel weights,
coated wheel weight installation/removal
tool, application chart and rim gauge. The Kit
2000 Professional covers over 95% of today’s
balancing needs.
INCLUDES:
• 2100 Wheel Weights
• 50 of each size for regular weights (REG)
• 25 of each for polyester-coated weights
• Installation/removal tool (WR 305-25K PC)
• Application chart
• Application rim gauge
• Header 74 plastic bins 1 metal floor stand
KIT 1000
LEAD FREE
This kit contains an
assortment of seven
styles of polyestercoated weights plus regular weights for steel
wheels. One box of adhesive weights is also
included. The pre-labeled, colour-coded bins
are supported on a bench mount display with
descriptive header. This system includes 40
pre-labeled colour-coded bins, dividers, over
1,000 wheel weights, 30 strips of adhesive
weights, coated wheel weight installation/
removal tool, application chart and rim gauge.
INCLUDES:
• 1,100 wheel weights
• 1 box of each size
• 1 box of adhesive
weights (312-30)
• Installation/removal
tool (WR 305-25K PC)
• Application chart
• Application rim
gauge
• Header
• 40 plastic bins
• 1 metal stand
DYNALINE Code: 378
Website: www.dynaline.com
N70 S.A.E.
O-RING KIT,
407 PCS
N70 METRIC
O-RING KIT,
419 PCS
• 32 sizes of Nitrile 70
O-Rings in a plastic box
with thickness gauge
• From 1/8” to 2” I.D.
• 32 sizes of Nitrile 70
Metric O-Rings in a
lockable plastic box
• from 3 mm to 50 mm I.D.
• 18 popular sizes of
green, HNBR O-rings
for air conditioning
applications
COTTER PIN
ASSORTMENT,
560 PCS
• The 6 most popular sizes
of cotter pins from 1/16”
to 5/32” in diameter
• Dimensions: 8-1/2” L x
6” W x 1-7/8” H
COTTER PIN
(LARGE)
ASSORTMENT,
150 PCS
• The 6 most popular sizes
of large cotter pins, from
1/8” to 5/16” in diameter
EXTERNAL “E”
RETAINER RING
ASSORTMENT,
300 PCS
• 9 popular sizes of external
“E” retainer rings from
1/16” to 7/8” in diameter
HAIR PIN
ASSORTMENT,
150 PCS
• The 6 most popular sizes
of hair pins, from 3/32”
to 5/32” in diameter
SNAP RING
ASSORTMENT,
300 PCS
• 18 popular sizes of snap
rings, from 1/8” to 1-1/4”
in diameter
AUTO FUSE
ASSORTMENT,
80 PCS
• Standard and Mini Fuses,
from 5 to 30A
• Dimensions: 6” L x 4” W
x 1-1/4”H
COPPER WASHER
ASSORTMENT,
110 PCS
• 6 popular sizes of copper
washers, from 1/4” to 5/8”
in diameter
METRIC GREASE
FITTING
ASSORTMENT,
110 PCS
• 9 popular sizes in a sturdy
plastic case
• Straight, 45º and 90º
from M6 to M10
• Dimensions: 8-1/2” L x
6” W x 1-7/8” H
S.A.E. AND
GREASE FITTING
ASSORTMENT,
100 PCS
• 7 popular sizes in a sturdy
plastic case
• Straight, 45º and 90º
from 1/8” NPT to 1/4”-28
• Dimensions: 8-1/2” L x
6” W x 1-7/8” H
WIRE TERMINAL
ASSORTMENT,
160 PCS
• The 8 most popular types of
wire terminals: Ring, Male,
Female, Splice, Spade, Butt,
Bullet male and Bullet female
• Dimensions: 8-1/2” L x 6” W
x 1-7/8 H
• The most popular sizes
in a sturdy plastic case
• From 3 A to 30 A
• Includes a fuse puller
STANDARD
PLUG-IN FUSES
ASSORTMENT,
101 PCS
• The most popular sizes in
a sturdy plastic case
• From 3 A to 30 A
• Includes a fuse puller
• Dimensions: 6”L x 4” W x
1-1/4” H
• 9 popular sizes of S.A.E. and
metric grease fittings: 1/8”
NPT, 1/4”-28, M6, M8 and
M10, both in straight, 45º
and 90º types
• Dimensions: 8-1/2” L x 6” W
x 1-7/8” H
• All the products needed for
automotive electrical repairs,
conveniently packed in a
high impact plastic carry
case with translucent lids
DYNAKITS
00140
00160
00164
GROMMET
ASSORTMENT,
125 PCS
• 18 popular sizes
of solid and hollow
grommets, from 1/8”
to 1” in diameter
PART NO. DESCRIPTION
00140
Standard Plug in Fuses,
50 pieces / 5 sizes
00141
Mini Plug-in Fuses,
50 pieces/5 sizes
00160
Cotter Pins Small,
215 pieces / 8 sizes
00161
Cotter Pins Large,
40 pieces / 12 sizes
00163
Grease Fittings S.A.E.,
40 pieces / 6 sizes
00164
Hair Pins, 28 pieces /
8 sizes
00173
Spring Pins, 62 pieces /
13 sizes
DYN
NALINE
MINI PLUG-IN
FUSES
ASSORTMENT,
101 PCS
S.A.E. AND METRIC GREASE
FITTING ASSORTMENT, 70 PCS
ELECTRICAL
REPAIR KIT,
285 PCS
TRAILER, TOWING AND ACCESSORIES
HNBR O-RING
ASSORTMENT,
270 PCS
80
DYNALINE Code: 378
Website: www.dynaline.com
NEW! HEAVY DUTY 19.2V
RECHARGEABLE
GREASE GUN KIT
RECHARGEABLE GREASE GUN KIT
TRAILER, TOWING AND ACCESSORIES
More flow, longer life, improved balance.
Longer running time per charge. Ideal for Ag
implements, tractors, construction, industrial
machinery, automotive or ideal where high
volume portable greasing is required
• Two 19.2 V heavy duty NICAD battery
packs 1,500 mAh
• 19.2 V 1 hour quick charger
• 42” heavy duty flexible hose
• Grease assembly tube
• Ergonomically balanced, whip hose holster
• Maximun operating pressure: 8,500 PSI,
high flow rate of 4.9 oz/minute
RECHARGEABLE GREASE
GUN REPLACEMENT PARTS
11041
For 11040, Rechargeable NiCd. 18 V DC, 1300 mAh
11043
Replacement 120 V/60 Hz-18 V DC Charger
11073
3 oz, 85 g lithium grease tubes, 3 pk
• Flexible Hose 30” with coupler
and pressure relief valve
• Maximun operating pressure:
8,000 PSI, flow rate of 4 oz/
minute
LEVER GREASE GUNS
• Knurled barrel for a non-slip grip
• 2 way loading: uses standard
14 oz grease cartridges or can
be bulk filled
• Die cast head with non-slip grip
• Uses standard 14 oz grease cartridges
or can be bulk filled
• Easy cartridge replacement
• Includes a 6” steel curved extension
pipe and coupler
PART NO. DESCRIPTION
WORKING PRESSURE
11082C
Premium Heavy Duty Model,
Cast iron pump head, Variable
stroke mechanism
4,500 psi, develops up to
10,000 psi
11083
Standard Duty Model, Die Cast
pump head
4,500 psi, develops up to
10,000 psi
11085A
Heavy Duty Model, Die Cast
pump head, Vinyl grip handle,
Variable stroke feature
4,500 psi, develops up to
10,000 psi
?
PISTOL GRIP GREASE GUNS
• Die cast pump heads for strength
and durability
• Knurled barrel for a non-slip grip
• Convenient one hand operation
• Uses standard 14 oz grease
cartridges or can be bulk filled
• Locking plunger mechanism
holds follower rod firmly in place
for easy cartridge replacement
PART NO. DESCRIPTION
DYNALINE
81
PART NO. DESCRIPTION
Speeds routine
lubrication tasks and
relieves worker fatigue
• 3-way loading,
bulk cartridge
and filler pump,
5-6 cartridges
per charge
WORKING
PRESSURE
11066
Premium Heavy Duty Model,
includes 16” flexible hose,
coupler and air release valve.
Variable stroke feature
4,500 psi, develops up
to 10,000 psi
11084A
Includes 18” flexible hose,
5” steel extension and grease
coupler
4,500 psi, develops up
to 7,300 psi
11087A
Includes 5” steel extension
and grease coupler only
4,500 psi, develops up
to 7,300 psi
MINI PISTOL GREASE GUNS
• Die cast pump heads for strength
and durability
• Knurled barrel for a non-slip grip
• Convenient one hand operation
• Uses standard 3 oz grease cartridges
or can be bulk filled
PART NO. DESCRIPTION
WORKING PRESSURE
11088A
Includes 12” flexible hose, 4”
and 4” steel extensions and
grease coupler
4,000 psi, develops up to
10,000 psi
11089A
Includes 5” steel extension and
grease coupler only
4,000 psi, develops up to
10,000 psi
DYNALINE Code: 378
Website: www.dynaline.com
SUCTION
GREASE GUN
PREMIUM MINI
AIR GREASE GUN
• Multi-position, adjusts to
any angle
• Fully automatic and provides
continuous grease flow
• Exclusive air piston design
to ensure constant priming
• Includes grease coupler
and steel extension
• Working air pressure: 90 psi
BATTERY FILLER
• 1/2 gal (2 L) capacity
• For sealed bearings and joints
GREASE GUN
HOLDER
PART NO. DESCRIPTION
• Robust design allows for
easy draining and filling
• 12” vinyl hose included
• 7,300 psi 17 oz (500 CC)
• Holds grease guns and
suction guns with 2-1/4”
diameter barrel
• Easily mounts on most
surfaces
90º ANGLE
GREASE
COUPLER
LEVER
BARREL PUMP
• Specially designed for the
fast transfer of lubricants,
solvents, agricultural and industrial chemicals, additives
and other non-corrosive
liquids from 15 to 55 gallon
drums with 1-1/2” or 2”
bung openings
• Self-adjusting telescopic
suction tube
• Zinc-plated corrosion
resistant finish
• Dispenses approx. 3/4 pint
(350 ml) per stroke
RETRACTABLE
HOSE REEL
• Industrial grade hose for
water, oil and air
• Auto rewind, heavy duty
steel assembly
• Increases work safety,
keeps hoses off floors
• Self locking mechanism,
heavy duty springs
PART NO. DESC.
11359
1/4" x 35'
11360
3/8" x 50'
11361
1/2" x 50'
• A convenient and durable
storage container
• Provides safe storage and
transportation, preventing
spills and contamination
• Stores 12 tubes upright,
dust caps on
11123A
18 gauge x 1-1/2” long, 1 per pk
11124A
18 gauge and 21 gauge, 1-1/2” long, 2 pcs
GREASE COUPLER
• Can be used where space
is a problem or as a
general purpose grease
coupler
• Fits all standard
grease guns
PART NO. DESCRIPTION
11121A
6,000 psi, 1/8” NPT coupler, light to medium duty
11125A
10,000 psi, 1/8” NPT coupler, heavy duty
GREASE HOSES
• 1/8” NPT
• Working temperature:
-40º to 95ºC
PART NO. DESCRIPTION
GREASE BOX
18 gauge x 1-1/2” long, 3 per pk
• With ballcheck and hex nut on body end
• Fits over grease fittings
GREASE-2-GO!
11122
• Durable plastic material
• Can be fastened to a
wall or equipment
• Stores and protects two
14 oz grease cartridges
upright
28330
11140
12" thermoplastic cover
with nylon braid
4,500 psi, retail pk
11141
18" thermoplastic cover
with nylon braid
4,500 psi, retail pk
11142
12" rubber cover with
steel wire braid
3,600 psi, bulk UPC
11142A
12" rubber cover with
steel wire braid
3,600 psi, retail pk
11143
18" rubber cover with
steel wire braid
3,600 psi, bulk UPC
11143A
18" rubber cover with
steel wire braid
3,600 psi, retail pk
TRAILER, TOWING AND ACCESSORIES
GREASE
INJECTORS
DELUXE WHEEL SPINNER
NEEDLE NOSE
DISPENSER
• Universal joints, tough to
reach areas
• 1-1/2 needle nose with
1/8” threads
28331 • Farm hardware designed and built to last a lifetime with
rugged use and all-weather conditions
• Aluminum weather-proof knob
PART NO. DESC.
• Chrome plated bracket
Red
• Adapts to most steering wheels 28330
• Not for highway use
28332
28331
Black
28332
Checker
82
DYNALINE Code: 378
Website: www.dynaline.com
MULTI-PURPOSE
FUNNELS
TRAILER, TOWING AND ACCESSORIES
MULTI-PURPOSE
FUNNEL SETS
PART NO. SIZE
CAPACITY
PART NO. DESCRIPTION
13504
4"
8 oz (237 ml)
13503
3pcs, one each of 4", 5" and 6"
13505
5"
14 oz (414 ml)
13511
4pcs, one each of 2", 3", 4" and 5"
13506
6"
32 oz (946 ml)
13508
8"
120 oz (3.55 L)
13510
10"
160 oz (4.73 L)
SUPER FUNNEL
• Plastic, 5" diameter, 18" length
TIN FUNNELS
• Made of lightweight tin coated steel
PART NO. SIZE/DESC. CAPACITY
MEASURER WITH
LID AND NOZZLE
INDUSTRIAL FUNNELS
• All funnels include one 100 mesh filter
• Made of flexible, durable, spark-proof, dent-proof,
rust-proof, clear polyethylene
• Handy hang-up tab
PART NO. SIZE/DESC.
CAPACITY
13003
3"
6 oz (177 ml)
13005
5"
24 oz (710 ml)
13550
3-1/2"
5 oz (148 ml)
13554
8"
56 oz (1.6 L)
• Suitable for water, oil,
gasoline and anti-freeze
• Made of tough, durable
polyethylene
PART NO. DESC.
TRACTOR FUNNEL
• Heavy duty galvanized steel
• Comes with one gold mesh filter
• Diameter: 9-1/2" Height: 11-1/2",
Tip O.D.: 1", Capacity: 8 qt (7.5 L)
CAPACITY
14040
Embedded lid
and nozzle
1 gal (4 L)
14045
Blow molded
fixed lid
152 oz (4.5L)
13008
8" automotive
120 oz (3.55 L)
13009
9"
144 oz (4.26 L)
13015
5" with anti-splash rim
24 oz (710 ml)
13019
9" with anti-splash rim
144 oz (4.26 L)
C30030
3" made in Canada,
colour: natural
6 oz (177 ml)
C30050
5" made in Canada,
colour: natural
24 oz (710 ml)
C30080
8" offset rim, automotive, made in Canada,
colour: natural
120 oz (3.55 L)
OFFSET
TRANSMISSION FUNNEL
C30090
9" made in Canada,
colour: natural
144 oz (4.26 L)
C30092
9" made in Canada,
colour: black
• Metal-Black finish, 2 L capacity
• 17" flexible spout
• 7” diameter
144 oz (4.26 L)
2-IN-1 FLEXIBLE
SPOUT FUNNEL
• Plastic with 100 mesh filter incl.
• Detachable 10" spout
• 6-1/4" diameter
RADIATOR FILLER
• 2-1/2 gal (9.46 L)
REPLACEMENT
FUNNEL FILTER
10 PK
DYNALINE
83
• Flexible, durable,
spark-proof, dent-proof,
rust-proof polyethylene
• Handy hang-up tab
• Fits industrial, automotive and
anti-splash funnels
INDUSTRIAL THUMB
PUMP OILERS
TRANSMISSION FUNNELS
PART NO. SIZE/DESC.
• Seamless steel body and brass pump mechanism
• Durable enamel painted finish
• Supplied with flexible and rigid metal spouts
CAPACITY
PART NO.
14014
Galvanized metal
with mesh filter,
14" flexible spout
5-1/2"
diameter
14017
Plastic, 16"
detachable spout
5-1/2"
diameter
DESCRIPTION
13607
7 oz (200 CC)
13610
10.6 oz (300 CC)
13617
17 oz (500 CC)
13624
24 oz (700 CC)
DYNALINE Code: 378
Website: www.dynaline.com
RETAIL PACKAGED TRAILER BALL, EXTERNAL THREAD
CHANNEL
COUPLER
• 1-7/8” ball size
PART NO. DESCRIPTION
11156
Channel size: 2" gross
load rating: 2,000 lb
11157
11158
11147P
1-7/8" x 1", Shank Length: 2", gross load rating: 3,500 lb
11151P
1-7/8" x 3/4", Shank Length: 1-1/2", gross load rating: 2,000 lb
11152P
2" x 3/4", Shank Length: 1-1/2", gross load rating: 3,500 lb
11153P
2" x 1", Shank Length: 2", gross load rating: 5,000 lb
11154P
2-5/16" x 1", Shank Length: 2", gross load rating: 5,000 lb
11155P
2-5/16" x 1-1/4", Shank Length: 2", gross load rating: 10,000 lb
CHANNEL
COUPLER
A-FRAME
COUPLER
• 2” ball size
• Standard type
PART NO. DESCRIPTION
• Solid steel
• Bright chrome plated finish
• Individually retail packaged
PART NO. DESCRIPTION
11159
Channel size: 2-1/2" gross
load rating: 3,500 lb
11161
Ball size: 2" gross load rating:
5,000 lb
Channel size: 2-1/2" gross
load rating: 2,000 lb
11159N
Channel size: 2" gross load
rating: 3,500 lb
11162
Ball size: 2-5/16" gross load
rating: 10,000 lb
Channel size: 3" gross
load rating: 2,000 lb
11160
Channel size: 3" gross load
rating: 3,500 lb
– LARGE TRIGGER-ACTION LATCH EASES OPERATION –
STANDARD BALL
MOUNT, STRAIGHT
CLEVIS MOUNT
RECEIVER
• Class 3
• Hole: 1", TW: 500 lb,
GTW: 5,000 lb
• Hole: 1", TW: 500 lb,
GTW: 5,000 lb
• Solid shank
PART NO. DESC.
CLASS 4 STEEL
BALL MOUNT
11661
TW: 1,200 lb, GTW
12,000 lb, 1" hole,
4" drop, 2" rise
• Robotic welded shank
• Fits 2” receivers
• Black powder coated finish
11662
TW: 1,200 lb, GTW
12,000 lb, 1" hole,
6" drop, 5" rise
• Class 4
• Hole: 1",
TW: 600 lb,
GTW:
6,000 lb
BALL MOUNT KITS
PART NO. DESC.
11601
• Class 3-4
• 3 ball sizes: 1-7/8",
2", 2-5/16"
• TW: 350 lb, 600 lb,
1,000 lb
• GTW: 3,500 lb,
6,000 lb, 10,000 lb
• Includes tow hook
2” drop
11602
4” drop
11603
6” drop
• Class 4
• TW: 600 lb,
GTW: 6,000 lb
KIT INCLUDES:
Ball mount, trailer
ball and pull pin.
Fits 2” receivers.
PART NO. DESC.
11591
2" ball size
11592
2-5/16"
ball size
ADJUSTABLE
BALL MOUNT
SHACKLE (TOW
STRAP) BALL
MOUNT
• Black powder
coated finish
• For use on tow trailers of
various coupler heights
• Can be used in the rise
or drop position as
needed.
• For use with recovery straps on
pickups and ATVs
• Fits 2" receivers. TW 600 lb, GTW
6,000 lb, overall length 9-3/8"
DYNALINE
11660
TW: 1,200 lb, GTW
12,000 lb, 1" hole,
2" drop, 1" rise
STANDARD
BALL MOUNTS
TRIPLE BALL
MOUNT
TRAILER, TOWING AND ACCESSORIES
PART NO. CAPACITY
84
DYNALINE Code: 378
Website: www.dynaline.com
TRAILER, TOWING AND ACCESSORIES
DUAL HITCH
EXTENSION
• Fits 2" receivers. Black powder
coated finish. Length: 12-1/4",
Height: 6-1/4", Capacity: 4,000 lb
STEP
BUMPER
RECEIVER
RECEIVER PULL PINS
STAINLESS
• Welded Class 3 receiver. High gloss powder coated
black finish. Fits many factory and other aftermarket
step bumpers. Accepts any 2" square ball mount.
TW: 500 lb, GTW: 5,000 lb, Capacity: 4,000 lb
STAINLESS STEEL - WON’T RUST!
• For securing ball mounts to
receiver-type hitches
• Supplied with hair pin clip
PART NO. DESCRIPTION
66267
1/2" Diameter,
3" U.L.
66268
5/8" Diameter,
3" U.L.
66269
5/8" Diameter,
3-1/2" U.L.
HITCH BOX
EXTENSION
HITCH
ADAPTERS
• 2" extension only
• 14" x 7" stepping area
• Black powder coated finish
• Not to be used for towing
PART NO. DESCRIPTION
11786
Decrease receiver opening from
2" to 1-1/4"; 5/8" pin hole, 3-1/2" length
11787
Decrease receiver opening from
2" to 1-1/4"; GTW 3500 lb
11788
Increase receiver opening from
1-1/4" to 2", GTW 3500 lb
RECEIVER PULL PINS
CARBON/ZINC
• High Carbon Steel,
Zinc Plated!
• For securing ball
mounts to
receiver-type hitches
• Supplied with hair
pin clip
23057
COUPLER LOCK
•
•
•
•
•
Fits all latch-type couplers
Two keys supplied
Yellow dichromate finish
Clamshell packaging
Diameter 1/4", Usable
Length 7/8" (closed)
FIFTH WHEEL
KING PIN
STABILIZER
23058
SPRING LATCHES
• Spring loaded bolt can be locked in
the open position
• Zinc plated bolt housing and keeper
• Turning lever allows the bolt to close
under spring pressure.
• Eliminates motion of
unhitched trailer or RV
• Includes padlock
with inserts
• Folds for storage,
heavy duty steel construction
• King pin height adjusts from 35" to 55"
• Support Capacity: 5,000 lb, Footplate
Dimensions: 5" x 5-1/2", Weight: 23 lb
PART NO. DESCRIPTION
66270
1/2" Diameter, 3" U.L.
66271
5/8" Diameter, 3" U.L.
66271P
66271, carded, 66265
E-Z Clip included
66272
5/8" Diameter, 3-1/2"
U.L.
RECEIVER (HITCH)
LOCK PINS
PART NO. DESC.
23057
Loop type handle,
Pin Dia: 1/2",
bracket 5-1/2" x
1-1/2", Overall
Length 7-1/4",
Hole Dia. 3/16"
23058
4" L shaped
handle, Pin Dia:
7/16", bracket
2-3/4" x 1-3/4",
Overall Length
6-1/2", Hole Dia.
3/16"
COUPLER &
RECEIVER
LOCK SET
85
• Fits most receiver hitches
and latch-type couplers
• Same key fits both locks
• Chrome plated
• Clamshell packaging
• Receiver Diameter 1/2",
Usable Length 2-3/4"
• Coupler Lock 1/4",
Usable Length 1"
EZ-CLIPS
•
•
•
•
Bent at the perfect angle for easy removal
Made from oil tempered spring wire
Clear zinc plated finish
Wire diameter 0.148"
PART NO. DESCRIPTION
66265
Clear zinc plated finish,
25 pkg qty
66266
Vinyl coated non-slip
grip, 10 pkg qty
66274
• Two sizes to fit most
receiver-type hitches
• Two keys supplied
• Bright chrome plated
pin
• Black enamel painted
lock body
• Clamshell packaging
PART NO. DESCRIPTION
66274
Diameter 1/2", Usable
Length 2-1/2", Tensile
Strength 5,500 lb
66275
Diameter 5/8", Usable
Length 3", Tensile
Strength 8,800 lb
DYNALINE Code: 378
Website: www.dynaline.com
SWING-WAY
JACK
POWER JACK
11895
• Dual sided LED light system
• All cast aluminum motor and gear
• 3,000 lbs of lifting power for
instantaneous tongue breakaway
• Tracks 10” in 30 seconds
STABILIZER
JACK
•
•
•
•
PART NO. DESCRIPTION
11466
11477
Lift capacity: 1,200 lb,
lift: 10", wheel dia.: 6"
height extended: 23"
usable, 33" overall
A-FRAME JACKS
• Heavy duty round tube with slotted
triangular bracket for easy bolt
mounting or welding to A-frame
type trailer couplers
• Detachable 6-1/2" reinforced
polycarbonate wheel
• Black enamel painted finish
Lift capacity: 1,500 lb,
lift: 10", wheel dia.: 8"
height extended: 25"
usable, 35" overall
PART NO. DESCRIPTION
11463
LEVELING
SCISSOR JACK
• Used for stabilizing and leveling 5th
wheels and travel trailers
• Sturdy steel construction. Designed
for today’s larger and heavier units
• Permanently mounted and conveniently
concealed when not in use
• Easy to install
PART NO. DESCRIPTION
11890
Lift Capacity 2,500 lb;
Lift 4" to 24"
11891
Lift Capacity 5,000 lb;
Lift 4" to 24"
Top wind with wheel, lift
capacity: 1,200 lb, lift: 14",
extended height: 34"
11465
Top wind with wheel, lift
capacity: 1,200 lb, lift: 14",
extended height: 34"
11467
Side wind with wheel, lift
capacity: 1,200 lb, lift: 15",
extended height: 40"
11484
Side wind without wheel, lift
capacity: 2,000 lb, lift: 15",
extended height: 35"
11492
Top wind without base, wheel,
lift capacity: 5,000 lb, lift: 15",
extended height: 35"
11493
Top wind without base, wheel,
lift capacity: 5,000 lb, lift: 15",
extended height: 37"
SMALL DIAMETER CABLE
D
D
PART NO. DESCRIPTION
77000
7x7 SDC — 1/16" x 500 ft
Break Strength: 480 lb
77001
7x7 SDC — 3/32" x 500 ft
Break Strength: 920 lb
77002
7x7 SDC — 1/8" x 250 ft
Break Strength: 1,700 lb
77010
7x7 SDC — 1/16" x 1000 ft
Break Strength: 480 lb
77011
7x7 SDC — 3/32" x 1000 ft
Break Strength: 920 lb
77012
7x7 SDC — 1/8" x 1000 ft
Break Strength: 1,700 lb
77003
7x19 SDC — 5/32" x 250 ft
Break Strength: 2,800 lb
77004
7x19 SDC — 3/16" x 250 ft
Break Strength: 4,200 lb
77005
7x19 SDC — 1/4" x 250 ft
Break Strength: 7,000 lb
77006
7x19 SDC — 5/16" x 250 ft
Break Strength: 9,800 lb
77007
7x19 SDC — 3/8" x 250 ft
Break Strength: 14,400 lb
PART NO.
DESCRIPTION
11468
Top wind, lift capacity: 5,000 lb,
lift: 10", extended height: 27-1/4"
77013
7x19 SDC — 5/32" x 1000 ft
Break Strength: 2,800 lb
11469
Top wind, lift capacity: 5,000 lb,
lift: 15", extended height 35-1/4"
77014
7x19 SDC — 3/16" x 1000 ft
Break Strength: 4,200 lb
11472
Side wind, lift capacity: 5,000 lb,
lift: 15", extended height: 38-1/4"
77015
7x19 SDC — 1/4" x 1000 ft
Break Strength: 7,000 lb
11473
Side wind, lift capacity: 5,000 lb,
lift: 10", extended height: 27-1/2"
77016
7x19 SDC — 5/16" x 1000 ft
Break Strength: 9,800 lb
77017
7x19 SDC — 3/8" x 1000 ft
Break Strength:14,400 lb
77020
6x19 SDC — 1/2" x 100 ft
Break Strength: 22,000 lb
DYNALINE
• Improved internal gear mechanism
and heavy duty rolled threads for
smooth operation and dependability
• 4-position mounting tube, lock-pin
and handle
• Black enamel painted finish
D
• Galvanized steel • Supplied on spools
ROUND TUBE IMPLEMENT JACKS
Trailer stabilizer
Lift capacity 1,000 lb
Retracted height 11.5"
Extended height 18"
TRAILER, TOWING AND ACCESSORIES
• Heavy duty swivel
mechanism swings
and locks jack to
storage position
• Pull-type locking pin
secures jack into
load-bearing position
• Fits tongues up to 3" x 5"
86
DYNALINE Code: 378
Website: www.dynaline.com
CLEVIS GRAB
HOOK, ALLOY
TRAILER, TOWING AND ACCESSORIES
CART WHEEL PART NO. DESCRIPTION
• Size: 2.50-4
• Hub width: 1.75"
• Capacity: 160 lb
80101
8.5" Pneumatic, Lug
PART NO. DESCRIPTION
80102
8.5" PU Flat Free, Lug
66120
1/4", WLL: 3,600 lb
66121
5/16", WLL: 5,400 lb
66122
3/8", WLL: 7,500 lb
HAND TRUCK WHEEL
• Size: 4.10/3.50R4
• Hub width: 2.28"
• Capacity: 260 lb
80105
10" Pneumatic, Sawtooth
80107
10" PU Flat Free, Jag
HAND TRUCK WHEEL, OUTDOORS EQUIP.
• Size: 4.10/3.50R4
• Hub width: 1.53”
• Capacity: 240 lb
• For use with Grade 30
and Grade 40 chain
• Forged carbon steel
• Clear zinc plated finish
PART NO. DESCRIPTION
PART NO. DESCRIPTION
66110
1/4", WLL: 2,600 lb
80109
10” Pneumatic, Diamond
66111
5/16", WLL: 3,900 lb
80111
10" PU Flat Free, Diamond
66112
3/8", WLL: 5,400 lb
HEAVY DUTY HAND TRUCK WHEEL
• Size: 13/5.00R6
• Hub width: 3.15”
• Capacity: 370 lb
CLEVIS GRAB
HOOK
PART NO. DESCRIPTION
PART NO. DESCRIPTION
80113
12" Pneumatic, Jag
80115
12" PU Flat Free, Smooth
HIGH-SPEED
TRAILER
WHEEL
WHEEL BARROW
WHEELS
CABLE CLIPS,
MALLEABLE IRON
• Meets federal
specs FF-C450, Type 1,
Class 2
• Galvanized
iron body
• Complete with
U-bolts and
nuts
• Spoked, white
enamel painted rim
• 5 lug pattern on
4-1/2" bolt circle
• Size: 4.80/4.00R8
• Hub width: 6"
• Capacity: 370 lb
PART NO. DESCRIPTION
PART NO. DESC.
80116
15" Pneumatic, Smooth
80120
12" Pneumatic
80118
15" PU Flat Free, Jag
80124
12" Pneumatic
80128
13" Pneumatic
PART NO. DESC.
77030
1/8"
77031
3/16"
77032
1/4"
77033
5/16"
77034
3/8"
77035
1/2"
77036
5/8"
77037
3/4"
77038
7/8"
77039
1"
CABLE THIMBLES
• Meets federal
specs FF-T-276b,
Type 2
• Zinc plated steel
PART NO.
DESC.
77050
1/8"
Part #11285
77051
3/16"
ROPE LOCK
77052
1/4"
This unique patented rope securing tool will secure
all types and sizes of rope including rubber rope
and stretch cord from 1/8" to 7/16" in diameter. The
quick release is made of non-corrosive space age
composite and is virtually indestructible with only
one moving part that will not clog or stick. Comes
with 3/8” diameter rope. Tested to 400 lb.
77053
5/16"
77054
3/8"
77055
1/2"
77056
5/8"
80130
DYNALINE
87
• For use with Grade 70 chain
• Forged alloy steel
• Yellow zinc dichromated
14" Pneumatic
DYNALINE Code: 378
Website: www.dynaline.com
DOUBLE LOOP LOIN CHAIN, REELS
• For farm and truck load binding applications, towing,
construction, and logging
• High alloy steel • Yellow chromate finish
• For animal restraints, swings, door crash stops, and other uses
• Zinc plated
PART NO. DESCRIPTION
70020
1/4" x 800 ft, WLL:
3,150 lb, Full drums
70021
5/16" x 550 ft, WLL:
4,700 lb, Full drums
70022
3/8" x 400 ft, WLL:
6,600 lb, Full drums
70023
1/2" x 200 ft, WLL:
11,300 lb, Full drums
70034
1/4" x 65 ft, WLL:
3,150 lb, Pails
70035
5/16" x 50 ft, WLL:
4,700 lb Pails
70036
3/8" x 45 ft, WLL:
6,600 lb, Pails
70060
#2/0 x 150 ft,
WLL: 255 lb, Reels
70063
#3 x 200 ft,
WLL: 90 lb, Reels
70061
#1/0 x 100 ft,
WLL: 200 lb, Green
PVC Sheath, Reels
70062
#2 x 125 ft,
WLL: 115 lb, Blue
PVC Sheath, Reels
SINGLE JACK CHAIN
• For animal restraints, swings, door crash stops,
and other uses • Zinc plated
STRAIGHT LINK
COIL CHAIN
• For guard chain applications,
farm implements and animal
stakes
• Zinc plated
• WLL: 205 lb
PASSING LINK CHAIN
• Will not kink or knot!
• WLL: 450 lb
PART NO. DESCRIPTION
70085
#10T x 150 ft,
WLL: 43 lb Reels
70086
#12 x 100 ft,
WLL: 29 lb, Reels
70087
#14 x 200 ft,
WLL: 16 lb, Reels
GRADE 30 PROOF COIL CHAIN
• For pulling stumps, lashing cargo, pipeline installations,
logging, towing, mooring, and truck tailgates
• Low carbon steel • Zinc plated
PART NO. DESCRIPTION
PART NO. DESCRIPTION
70007
3/16" x 100 ft,
WLL: 800 lb, Pails
70008
1/4” x 65 ft,
WLL: 1,300 lb, Pails
70013
3/16" x 150 ft,
WLL: 800 lb, Pails
70014
1/4" x 100 ft,
WLL: 1,100 lb, Pails
70015
5/16" x 75 ft,
WLL: 1,900 lb, Pails
70016
3/8" x 45 ft,
WLL: 2,650 lb, Pails
TWIST LINK
MACHINE CHAIN
FURNACE CHAIN 250FT
• Light duty chain for use as retainer chain
• Zinc plated
• WLL: 411 lb
70050
70051
#4 x 100 ft,
WLL: 200 lb, Reels
PART NO. DESCRIPTION
Single 3" pulley, WLL 0.5 ton,
8 mm rope diameter, with loop
80335
Single 3" pulley, WLL 0.5 ton, 8 mm
rope diameter, with loop, safety latch,
access latch and grease fitting
BRASS SAFETY CHAIN 200FT
80340
• General utility chain
• Yellow chromate finish
• WLL: 351 lb
Single 4" pulley, WLL 1 ton, 10 mm
rope diameter, with loop
80345
Single 4" pulley, WLL 1 ton, 10 mm
rope diameter, with access latch only
(no safety latch) and grease fitting
80350
Double 3" pulley, WLL 0.5 ton, 8 mm
rope diameter, with loop
80355
Double 4" pulley, WLL 1 ton, 10 mm
rope diameter, with loop
80360
Single 3" pulley, WLL 0.5 ton, 8 mm
rope diameter, with eye, access latch,
safety latch and grease fitting
80365
Single 4" pulley, WLL 1 ton, 10 mm
rope diameter, with eye, access latch,
safety latch and grease fitting
SASH CHAIN 100FT
• Specifically designed to operate
smoothly over pulleys
• Ideal for hanging sash
• Zinc plated
• WLL: 106 lb
DYNALINE
DESCRIPTION
#2/0 x 75 ft,
WLL: 520 lb, Reels
PULLEY BLOCKS
80330
• Lays flat against surface. Ideal for
tie-down uses for welder tanks and
industrial equipment
• Zinc plated
PART NO.
TRAILER, TOWING AND ACCESSORIES
GRADE 70 TRANSPORT CHAIN
88
DYNALINE Code: 378
Website: www.dynaline.com
TRAILER, TOWING AND ACCESSORIES
ALUMINIUM
CABLE STOPS
PART NO. DESCRIPTION
77107
77116
CABLE CUTTERS
• Aluminum drop-forged handles
• Heat-treated blades (HRC 68-64)
• Small diameter galvanized cable with aluminum
stops and bracket
• Lockable with padlock (padlock not included)
1/16" cable, 3/16" length, 10 qty
77071
3/32" cable, 5/16" length, 10 qty
77072
1/8" cable, 5/16" length, 10 qty
77073
5/32" cable, 3/8" length, 10 qty
77074
3/16" cable, 3/8" length, 10 qty
77075
1/4" cable, 11/16" length, 5 qty
CABLE STOPS - DYNAPAKS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESC.
77107
3/16", 7-1/2” overall length
61205
1/8" cable diameter, 10" length
97070
Incl. 10 x 77070
77116
5/8", 23” overall length
62205
3/16" cable diameter, 11" length
97071
Incl. 10 x 77071
97072
Incl. 10 x 77072
77100
97073
Incl. 10 x 77073
HAND SWAGER
97074
Incl. 10 x 77074
• For installing aluminum or copper
sleeves and stops
• Heat-treated alloy jaws
• Crimping capacity: 1/16” to 3/16”
Diameter
• Length: 24”
97075
Incl. 5 x 77075
LEVER LOAD
BINDER
• LEBUS style
• Forged steel
• Painted finish
PART NO. DESCRIPTION
LOAD BINDER LOCK
• Eliminates load binder release
• Two width adjustments, easy to install and remove
• High visible yellow painted finish, complete with
locking pin
RATCHET LOAD BINDERS
DYNALINE
89
CABLE TYPE LOAD
BINDER LOCKS
77070
• Red/orange painted finish
• Forged steel
• Load tightener
66203
1/4"- 5/16" chain, 3.62" take up,
WLL: 2,600 lb, ULL: 7,800 lb
66204
5/16"- 3/8" chain, 4.25" take up,
WLL: 5,400 lb, ULL: 19,000 lb
66202
3/8" - 1/2" chain, 4.25" take up,
WLL: 9,200 lb, ULL: 33,000 lb
PART NO. DESCRIPTION
66196
1/4" chain, 5” take up, WLL:
2,600 lb
66197
5/16" to 3/8" chain, 8” take up,
WLL: 5,400 lb
66198
3/8" to 1/2" chain, 8” take up,
WLL: 9,200 lb
66199
1/2" to 5/8" chain, 9” take up,
WLL: 13,000 lb
ALUMINIUM
CABLE
SLEEVES
PART NO. DESCRIPTION
77080
1/16" cable, 3/8" length, 10 qty
77081
3/32" cable, 1/2" length, 10 qty
77082
1/8" cable, 5/8" length, 10 qty
77083
5/32" cable, 9/16" length, 10 qty
77084
3/16" cable, 1" length, 10 qty
77085
1/4" cable, 1-1/8" length, 10 qty
77086
5/16" cable, 1-1/4" length, 10 qty
77087
3/8" cable, 1-1/2" length, 10 qty
CABLE SLEEVE DYNAPAKS
PART NO. DESC.
97080
Incl. 10 x 77080
97081
Incl. 10 x 77081
97082
Incl. 10 x 77082
97083
Incl. 10 x 77083
97084
Incl. 6 x 77084
97085
Incl. 5 x 77085
EIKO Code: 354
Website: www.eiko.com
F32T8/841K
LIGHTING
LINEAR FLUORESCENTS
• Long life
• High quality tri-phosphor blends
• Environmentally-friendly TCLP and CEE ratings
Part #SP13/27K
Part #SP105/50/MED
Part #QT13/41
QT26/41-4P
COMPACT FLUORESCENTS
LAMP#
LENGTH
F17T8/841K
24”
F28T8/841/ES*
36”
LAMP#
DESCRIPTION
F28T8/841
48”
SP13/27K
13 W 120 V 2700 K Spiral
F32T8/841K*
48”
SP13/41K*
13 W 120 V 4100 K Spiral
60W
F54T5/HO/841
46”
SP23/41K*
23 W 120 V 4100 K Spiral
100W
F34T12/CW/RW
48”
SP32/41K*
32 W 120 V 4100 K Spiral
130W
SP42/41K*
42 W 120 V 4100 K Spiral
150W
SP85/41/MED
85 W 120 V Spiral 4100 K Medium Base
400W
SP85/50/MED
85 W 120 V Spiral 5000 K Medium Base
400W
• Features long life, high quality tri-phosphor blends and TCLP compliance
./71<6/=/86:9:2
Part #MH400/U
SP105/41/MED
105 W 120 V Spiral 4100 K Medium Base
500W
METAL HALIDE
SP105/50/MED
105 W 120 V Spiral 5000 K Medium Base
500W
• Commercial grade, high
quality HID lamps
DT9/41
9 W Duo-Tube 4100 K G23 Base
DT40/41/RS
40 W Duo-Tube 4100 K 2G11 Base
QT13/41
13 W Quad-Tube 4100 K GX23-2 Base
QT26/41-4P
26 W Quad-Tube 4100 K G24q3 Base
LAMP#
MH400/U - Clear
MH1000/U - Clear
Part #DT40/41/RS
“A” SHAPED INCANDESCENT
• Provides a whiter, brighter light that saves up to 30% in energy costs
Part #PAR30LN/15/30K
Part #DT9/41
./71<6/=/86:9:2
HALOGEN PAR
Part #75PAR38/H/FL-120V
REPLACES
• Clear or Inside frosted
• 130 V extended life
LAMP#
BEAM SPREAD
LAMP#
50PAR20/H/SP-120V and 50PAR20/H/SP-130V
NFL or SP
40A-130V
50PAR30HNFL120V and 50PAR30HNFL130V*
FL, NFL or SP
60A-130V
35475PAR30HNFL120V and 35475PAR30HNFL130V*
FL, NFL or SP
100A-130V
45PAR38/H/FL-120V and 45PAR38/H/FL-130V
FL, WFL, NSP or SP
75PAR38/H/FL-120V and 75PAR38/H/FL-130V
FL, WFL, NSP or SP
90PAR38/H/FL-120V and 90PAR38/H/FL-130V
FL, WFL, NSP or SP
./71<6/=/86:/1:G:85A
ROUGH SERVICE
INCANDESCENT
• Inside frosted or TF=silicone coated
• Ideal for workshops and industrial facilities
CFL PAR
LAMPS
LAMP#
REPLACES
LAMP#
• Uses a halogen PAR
style reflector and lens
that produces a precise
beam pattern
PAR20/9/30K and PAR20/9/41K
50 W PAR 20
50A/RS or 50A/RS/TF*
PAR30LN/15/41K and PAR30LN/15/30K 75 W PAR 30
75A/RS or 75A/RS/TF*
PAR38/23/30K and PAR38/23/41K
100A/RS or 100A/RS/TF*
NEW! EIKO BRAND BALLASTS
BALLAST#
90 W PAR 38
.$X6/651:8516:G
DESCRIPTION
Instant Start 2 lamp T8 ballast, 17W-25W-32W, 120-277VAC
PM-2X54T5-UNV-PS
Program Start 2 lamp T5 ballast, 39W-54W, 120-277VAC, 90CRated 9"Case
PM-4X32T8-UNV-IS
Instant Start 4 lamp T8 ballast, 17W-25W-32W, 120-277VAC
PM-4X54T5-UNV-PS
Program Start 4 lamp T5 ballast, 39W-54W, 120-277 VAC, 90 C Rated Short Case
EIKO
PM-2X32T8-UNV-IS
90
CLIPLIGHT® Code: 303
Website & Online Catalogue: www.cliplight.com
HEMIPRO LED RECHARGEABLES
Patented Uni-Beam technology, 70 degree beam,
2500 mAh battery, charge any time, most parts user replaceable.
LIGHTING
PART NO. DESCRIPTION
HEMIPLUS 3 LED LIGHT
• 820 Lumens
• 8+ hours continuous cordless run time
• Powerful, wide 70 degree beam with no
shadows or hot spots
• 8800 mAh Lithium Ion battery rechargeable
in 4 hours - charge any time
• Aircraft-grade aluminum chassis
• Charging station included
• Optional 12 V charger and magnet
• All parts replaceable in minutes
113302
2 LED, 360 Lumens
113303
3 LED, 540 Lumens
HEMIPRO 2 LED
RECHARGEABLE
FLEX LIGHT
Attaches to a car or metal with a strong magnetic base.
This super powerful LED lamp comes with ‘BEND
ANYWHERE AND STAY THERE’ flexibility.
PART NO. DESCRIPTION
111101
Flex Spot LED Light - 180 Lumens
111103
Magnetic Pick-up 3 LED Light
WORK LIGHT
13 WATT
FLUORESCENT
ANGLED LAMP
Grounded outlet handle, metal cage.
PART NO. DESCRIPTION
• Compact, angled lighting for tight spots
• 25 ft/ 7.6 m, SJTW cable with
magnet and grounded outlet handle
101307
23 ft / 7 m, 16/3 SJOW Cable, Black
101315
50 ft / 15 m, 16/3 SJOW Cable, Black
100307
23 ft / 7 m, 16/3 SJTW, Orange
100310
32 ft / 10 m, 16/3 SJTW, Orange
HEMITECH LED CORD REEL
•
•
•
•
•
Powerful, wide beam with no shadows or hot spots
Ultra-compact body design
Sliding hook and optional magnet
Aircraft-grade aluminum chassis
Protective lens shield replaceable in minutes
RUGGED DUTY WORK LIGHTS
Grounded outlet handle, metal cage.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
223112
223412
CLIPLIGHT
91
1 LED CORD REEL
• Single high-performance array LED
• 620 Lumens
• 84 degree beam
• 40 ft / 12.2 m, SJOW 18/2
4 LED CORD REEL
• 4 LED
• 720 Lumens
• 70 degree beam
• 40 ft / 12.2 m, SJOW 18/2
769770
25 ft / 7.6 m, 16/3 SJOW
769771
50 ft /15 m, 16/3 SJOW
HEMITECH LED LIGHT
•
•
•
•
Powerful, wide beam with no shadows or hot spots
Ultra-compact body design, sliding hook and optional magnet
Aircraft-grade aluminum chassis
Protective lens shield replaceable in minutes
PART NO. DESCRIPTION
123107
1 LED LIGHT
• 620 Lumens
• Single high-performance array LED
• 25 ft / 7.6 m, 18/2 SJOW Cable
• 84 degree beam
123307
3 LED Light
• 540 Lumens
• 3 LED light
• 25 ft / 7.6 m, 18/2 SJOW Cable
• 70 degree beam
SYLVANIA Code: 770
Website: www.sylvania.com
T8 OCTRON® FLUORESCENT SYSTEMS
These are T8 bulbs and ballasts used
for offices, houses, retail stores and
warehouses that are less than 16 feet in
height. These are and will be the best
replacement for T12 bulbs that will be
outlawed by the government within the
next few years. The magnetic ballasts
that have gone with the T12 bulbs have
already been banned for manufacturing
by the government. They will no longer
be available for purchase once Sylvania’s
supply is sold out.
PART NO. T8 LAMPS
BULB TYPE
LENGTH
WATTAGE
COLOUR TEMP.
CRI
21781
FO32841ECO
T8
4 foot
32
4100
82
21779
FO32835ECO
T8
4 foot
32
3500
82
21999
FO32741ECO
T8
4 foot
32
4100
75
22179
FO28841XPSSECO3
T8
4 foot
28
4100
82
22184
FO28850XPSSECO3
T8
4 foot
28
5000
82
22143
FO32850ECO
T8
4 foot
28
5000
82
21767
FO32841XPECO3
T8
4 foot
32
4100
82
21681
FO32841XPSECO3
T8
4 foot
32
4100
82
22178
FO28835XPSSECO3
T8
4 foot
28
3500
82
21763
FO32835XPECO3
T8
4 foot
32
3500
82
21720
FO32865XPECO
T8
4 foot
32
6500
82
21660
FO32850XPSECO3
T8
4 foot
32
5000
82
22026
FO32850XPECO3
T8
4 foot
32
5000
82
22234
FO3225W841XPSSECO3
T8
4 foot
25
4100
82
21777
FO32830ECO
T8
4 foot
32
3000
82
22233
FO3225W835XPSSECO3
T8
4 foot
32
3500
82
21998
FO32735ECO
T8
4 foot
25
3500
75
22137
FO17841ECO
T8
2 foot
17
4100
82
21774
FO25841XPECO3
T8
3 foot
25
4100
82
22174
FO96850XPECO
T8
8 foot
96
5000
82
LIGHTING
Please refer to Sylvania’s Lamp and Ballast e-catalogue for complete product listings.
QUICKTRONIC® T8 ELECTRONIC BALLASTS
Please refer to Sylvania’s Lamp and Ballast e-catalogue for complete product listings.
BULBS TO
BE USED
BULB LENGTH
ABLE TO USE
NUMBER
OF LAMPS
POWER TYPE
49863
QHE2X32T8UNVISLSC
T8
2 - 4 ft
2
Low power
49867
QHE4X32T8UNVISLSC
T8
2 - 4 ft
4
Low power
49473
QHE4X32T8UNVISLSC
T8
2 - 4 ft
4
Low power
49853
QHE2X32T8UNVISNSC
T8
2 - 4 ft
2
Normal power
49869
QHE2X59T8UNVISLSC
120-277V 10/CS 1/S
T8
8 ft only
2
Normal power
49861
QHE1X32T8UNVISLSC
T8
2 - 4 ft
1
Normal power
49477
QHE4X32T8347ISLSC
347V 10/CS 1/SKU
T8
2 - 4 ft
4
Normal power
49857
QHE4X32T8UNVISNSC
T8
2 - 4 ft
4
Normal power
49463
QHE2X32T8347ISNSC
347V 10/CS 1/SKU
T8
2 - 4 ft
2
Normal power
49471
QHE1X32T8347ISLSC
347V 10/CS 1/SKU
T8
2 - 4 ft
1
Normal power
49467
QHE4X32T8347ISNSC
347V 10/CS 1/SKU
T8
2-4
4
Normal power
SYLVANIA
PART NO. DESCRIPTION
92
ENERGIZER CANADA Code: 831
Website: www.energizer.ca
LIGHTING
INDUSTRIAL
WATERPROOF
6 V LANTERN
• Resistant to all types of
staining and corrosion
• Non-moving internal contact system
• Shockproof
• Shatterproof lens
• Good for marine applications
• Spare bulb holder
*$"
("
HARD CASE PRO
LED AREA LIGHT
6 LED HEADLIGHT
• Energizer 6 LED headlight
• 2 white spot, 2 white flood
and 2 red LEDs
• Includes 3 Energizer AAA batteries
*$"
HARD CASE PRO LED
FLASHLIGHT WITH 2 AA
BATTERIES
*$"
HARD CASE PRO
LED FLASHLIGHT WITH
4 AA BATTERIES
!
ENERGIZER
DISPOSABLE
FLASHLIGHT
LED 6 V
WATERPROOF
LANTERN
*$"
HARD CASE PRO
LED SPOT LIGHT WITH
4 C BATTERIES
ENERGIZER
93
*$
+
""
HARD CASE PRO
4 LED SWIVEL WITH
2 AA BATTERIES
LED SOLAR/CRANK
FLASHLIGHT
2 AAA LED
ALUMINUM
PEN LIGHT
SWS WARNING SYSTEMS Code: 581
The Safety &
Warning Light
Specialists!
Website: www.swscanada.com
www.swscanada.com
LIGHTING
INTELLIGENT™ SERIES LED BEACONS
INTELLIGENT™ SERIES LED MINIBAR
•
•
•
•
•
•
•
•
• Full 360º coverage, Intelligent™ communicating series
LED minibar with feature rich operations platform
• SAE J845 (2007) Class 1 compliant
PART NO. DESCRIPTION
• Parabolic reflector design
Amber inner lens, clear outer dome
• Battery check voltage monitoring system 16310
Intelligent™ communicating LED beacons
Meets or exceeds SAE J845 (2007) Class 1
12 - 24 V DC
0.5 - 1.5 amps max
AutoDim technology with photocell and manual override
Master/slave synchronizable up to 16 lights
User selectable flash patterns
Battery check voltage monitoring to
inform user if vehicle battery drops below
ideal voltage with visual indication
• LIN 2.0 Cluster ISO9141 compatible
• Modular design, upgradeable software
• Superior thermal management
•
•
•
•
•
•
•
User selectable flash patterns
Night time auto-dimming feature
Modular design, upgradeable software
12 - 24 V DC
Superior thermal management
Synchronization up to 16 lights
Multiple flash patterns
16311
Amber outer dome, clear inner lens
!
)!
TRAFFIC DIRECTING DEVICES
•
•
•
•
•
•
•
•
•
•
•
•
•
High, medium and low profile strobe beacons
12 - 48 V DC (200 A and 27,000 series), 2.5 amps max
12 V DC (201Z model), 0.5 amps max
User selectable flash pattern; double, single, quad
(high and medium profiles)
• Single flash (low profile)
• Various mounting options including permanent mount,
flange mount, magnetic mount, NPT conduit mount and
mirror bracket mount
• Low current draw
LED traffic directors and traffic arrows
48” and 36” standard (other lengths available)
12 V DC
Low current draw
Fully encapsulated LED panels
Cab mount controller
Rugged anodized aluminum extrusions
Four standard patterns: right, left, center-out and wig-wag
Power cable sold separately
SWS
STROBE BEACONS
94
GROTE Code: 522
Website: www.grote.com | Online Catalogue: www.grote.com/prodcat
GROTE SELECT™ 4” LED
BACK UP LAMP, FEMALE-PIN
LIGHTING
• Fits standard 4” lamp grommets and brackets
• Hermetically sealed lamp prevents water
intrusion
• Standard aftermarket connection provides for
ease of replacement
• Requires two lamps to meet back-up function
CLASS I LED AMBER BEACON
• Low or high dome options and 12 volt or 24 volt models
• 18 total flash patterns
• Polycarbonate base, permanent mount to dissipate heat
PART NO. DESCRIPTION
MECHANIC’S LED
FLASHLIGHT
• Popular black finish on impact resistant
aluminum body
• Bright 1 WATT LED uses 3 AA batteries
• Removable head and flexible attachment
allow for hands free use that gives the
user the opportunity to shine light where
it is needed
LOW PROFILE LED STROBE
SAE CLASS I LED LIGHT OUTPUT
• Unique flash pattern increases visibility to the human eye
• Overhead heat sink design allows for a very low profile pipe
mounted solution when flange is removed
76253
Amber, 12 V Low Dome
PART NO. DESCRIPTION
76263
Amber, 24 V Low Dome
76663
Yellow
77953
Amber, 12 V High Dome
76661
Clear
77963
Amber, 24 V High Dome
76665
Blue
76675
Blue Vacuum Mount/Magnet
76673
Amber Vacuum Mount/Magnet
HIGH PROFILE SMART STROBE® LAMP
• Die-cast aluminum base with a smooth surface
outer dome that protects the inner lens
• Field selectable double or quad flash settings
• Ideal for light and heavy duty applications
• Smart Strobe® automatically adjusts intensity
based on ambient lighting
PART NO. DESCRIPTION
77453
Yellow
AUXILIARY LED STROBE LAMP
• 4 high power LEDs with 19 flash patterns
• Synchronize option lets you connect multiple heads
• Mount anywhere with adjustable bracket
PART NO. DESCRIPTION
76793
Yellow
76795
Blue
76792
Red
MIGHTY MINI LED STROBE
GROTE
95
• SignalAlert™ provides greater visibility by creating
a varied flash pattern (vs. standard strobes with a
consistent flash pattern)
• Exclusive side-emitting LED technology rivals standard
strobe intensity with a single super LED diode
• 90 flashes per minute
PART NO. DESCRIPTION
77473
Yellow, Permanent Mount
77483
Yellow, Magnet Mount with Lighter Adapter
ROTOLED™ CLASS I LED HYBRID BEACON
SAE CLASS I LED HYBRID BEACON
• High intensity LED’s in a rotating warning device
• No gears, brushes or bulbs to wear out
• 8–3 watt LED’s with TIR optics produce an exceptionally bright warning device
• SAE J845 Class I (Amber and Clear/Blue)
• Temperature range: -22°F to +122° F (-30°C to +50°C)
• Polycarbonate lens with UV hard coating –
reduces cracking/hazing/fading
PART NO. DESCRIPTION
76683
Yellow
76685
Blue
76693
Yellow, Vacuum Mount
76695
Blue, Vacuum Mount
15" LOW PROFILE REFLEX™ LED MINI BAR
CLASS II LED MINI BAR LAMP
• 360° visibility to hazardous conditions
• Eight (8) LED reflector modules
• LED technology contributes to the minimizing of maintenance and repair downtime
PART NO. DESCRIPTION
76703
Yellow, Permanent Mount
76713
Yellow, Vacuum Mount
GROTE Code: 522
Website: www.grote.com | Online Catalogue: www.grote.com/prodcat
•
•
•
•
Motion sensor activation
Low profile sleek design, less than 15.0 mm height
Surface mount allows for quick and easy installation
300 lumens of output utilizing the latest LED WhiteLight™ technology
TRILLIANT® MINI
FLUSH MOUNT
• Flood pattern gives a wide cast near the
mounting source
• Perfect for mounting in situations where knock-off might be a problem
• Greater lumen output with lower power consumption
• 50,000-hour LED Whitelight™ for long lasting service
TRILLIANT® MINI LED
LED WHITELIGHT™ WORK LIGHT/FLOOD
• 50,000-hour LED WhiteLight™ for long lasting service
• Greater lumen output with lower power
consumption than leading competitors’ versions
• Polycarbonate hard-coated lens provides many
years of service
• Colour temperature provides a natural contrast
most like sunlight, reducing eye fatigue and
optimizing job performance
PART NO. DESCRIPTION
63611
Mini LED - Clear Flood
63601
Mini Spot - Clear
63621
Mini Trapezoid - Clear
63741
Mini Flood/24V - Clear
LIGHTING
S100 LED WHITELIGHT™
DOME LAMP
TRILLIANT® 36 LED WHITELIGHT™ WORK LAMP
• Replaces incandescent PAR 36 sealed beams
• TractorPlus™ pattern lamp
• Encapsulant potting for total circuit board
protection against moisture and corrosion
• PAR 36 LED lamp includes a pigtail for hard
wired applications
• Long Life LED’s rated at 40,000 hours provides
900 Lumens and last 100 times longer than
incandescent PAR 36 lamps
TRILLIANT® HIGH-OUTPUT SPOT
WHITELIGHT™ HIGH-OUTPUT WORK LAMP
• Field tested in brutal off-road conditions
• Color temperature provides a natural contrast most like
sunlight, reducing eye fatigue and optimizing job performance
• Superior lamp for mining, military, construction, off-road,
agriculture, utility and emergency vehicles
• Consistently delivers a bright light over time
PART NO. DESCRIPTION
PART NO. DESCRIPTION
63821-5
36 Sealed Beam, TractorPlus™, Spade/Screw Connector
63571
High Output Spot
63831-5
36 Wide Flood, Spade/Screw Connector
63581
Flood
63971
36 Sealed Beam, TractorPlus™, Packard Connector
63591
Trapazoid
63761
Wide Flood
63951
Flood with Reflector/External Switch
TRILLIANT® 36 WITH BRACKET
LED WHITELIGHT™
WORK LAMP/CONVERSION BULB
• Replaces incandescent PAR 36 sealed beams
• TractorPlus™ pattern lamp with bracket
• Encapsulant potting for total circuit board
protection against moisture and corrosion
• Long life LED’s rated at 40,000 hours, provide
900 lumens and last 100 times longer than
incandescent par 36 lamps
• Reduces eye fatigue optimizing job performance
• Colour temperature provides a natural contrast most like sunlight
• PAR 36 LED lamp includes a pigtail for hard wired applications
PART NO. DESCRIPTION
36 TractorPlus™ with Bracket
36 Wide Flood with Bracket
LED WHITELIGHT™ WORK LAMP
• New rugged package provides mounting flexibility,
small size, and powerful performance
• Strong die cast aluminum housing stands up to
shock and harsh workplace environments
• Available in TractorPlus™ and Wide Flood beam patterns
• Leak proof sealed lamp is certified IP69K; stands up to
scratches, pressure washing, and harsh weather
• Available with Amp Superseal and Deutsch connector options
• Potted for complete circuit board protection against moisture and corrosion
• Both models are rated at 50,000 hours and project 1,000 lumens
PART NO. DESCRIPTION
63981-5
Cube TractorPlus™, Amp Superseal Connector
63991-5
Cube Wide Flood, Amp Superseal Connector
GROTE
63861-5
63871-5
TRILLIANT® CUBE
96
HELLA Code: 526
Website: www.hella.com
Online Catalogue: www.myhellalights.com
LIGHTING
AUXILIARY LAMPS
PART NO. DESCRIPTION
005750941
Lamp Kit 500FF Drv 12 V H3 Fun cube
005750401
500FF Halogen Driving Lamp (single)
005750981
Lamp Kit 500FF Fog 12 V H3 Fun cube
010032801
Lamp Kit FF700 Drv H3
007133811
Lamp Kit Micro FF 12 V H3 Drv
007133801
Lamp Kit Micro FF 12 V H3 Fog
H71020201
Optilux 7" Xen Single Off Road Lamp
H71020171
Optilux 4" Xen Single Off Road Lamp
H71020181
Optilux 4" Xen Off Road Lamp Kit
010186901
Lamp Kit Re4000Xi Xenon
H15176201
Lamp Kit 70 mm MV LED Gen II Power sport
CONVERSION HDL
PART NO. DESCRIPTION
002395801
Headlamp Kit 7" 165 mm H4 12 V Ece
003427811
Headlamp Kit 190 x 132 mm H4 12 V Ece
002850811
Headlamp Kit 5 3/4" 135 mm H4 12 V Ece
ELECTRICS
PART NO. DESCRIPTION
HELLA
965400001
Relay 12 V 30 A Spst Bkt
933332011
Relay 12 V 20/40 A Spdt Bkt
97
HELLA Code: 526
Website: www.hella.com
Online Catalogue: www.myhellalights.com
LIGHTING
WORK LAMPS HALOGEN
PART NO. DESCRIPTION
H15161027
Work Lamp Oval 100 Db H3 12 V Cr Lds
006991664
Work Lamp As115 H3 12 V Cr Std Bulk
006991654
Work Lamp As115 H3 12 V Lr Std Bulk
H15161031
Work Lamp Oval 100 Db H3 12 V Lr Lds
H71030047
Work Lamp Optilux 12 V 55 W 3 x 5 Lead Blk
996134567
Work Lamp Mega Bm H3 12 V Lr Dt Hd Ped
996176491
Work Lamp 70 mm H3 12 V 55 W Cr Std Leads
H15506027
Work Lamp Ultra Beam 12 V H3
WORK LAMPS LED
PART NO. DESCRIPTION
Work Lamp PB2000 LED Mv Std Leads
996188011
Work Lamp PB1000 LED Mv Std Dt Hd
996188001
Work Lamp PB1000 LED Mv Std Dt
996188021
Work Lamp PB1000 LED Mv Std Dt Pmma
996192011
Work Lamp PB 3000 Lr
996192001
Work Lamp PB 3000 Cr
996176721
Work Lamp 70 mm Gen II LED Mv Cr Std Leads
(18H$1"6G6/;;67:88282
HELLA
996189001
98
HELLA Code: 526
Website: www.hella.com
Online Catalogue: www.myhellalights.com
LIGHTING
ACCESSORIES
PART NO. DESCRIPTION
H84985241
PGTL DT2 300MM, Pigtail 300 mm with 2 Pin
DT Connector
H84985451
PGTL DT6 355MM, Pigtail 355 mm with 6 Pin
DT Connector
WORK LAMPS XENON
PART NO. DESCRIPTION
996242511
Work Lamp AS300 D1s 24 V Cr Dt Ped Std
996242101
Work Lamp AS400 D1s 12 V Cr Dt Ped Std
HEAD LAMPS ADD ON
PART NO. DESCRIPTION
HELLA
99
996167191
Headlamp Oval 120 C120 Hb2 12 V Sae Lh Bkt
996167201
Headlamp Oval 120 C120 Hb2 12 V Sae Rh Bkt
996174051
Headlamp Ext C220 H7/H3 12 V Ece Lh Dt6
996174061
Headlamp Ext C220 H7/H3 12 V Ece Rh Dt6
(18H$16G6/;;67:88282
HELLA Code: 526
Website: www.hella.com
Online Catalogue: www.myhellalights.com
PART NO. DESCRIPTION
Optilux LED Mini Light Bars feature 8 high intensity amber or white
LED lightheads plus 10 flash patterns including steady on and rotating.
Twin Strobe Mini Light Bar - Amber features two high intensity strobe
lights with a central diamond mirror for second flash.
• Fixed or magnetic mounting (4 X floating magnets for optimal fit to
vehicle roof)
• Polycarbonate UV stabilized dome and robust ABS plastic base
H74998001
Light Bar Mini LED 12 V Fxd Amber Optilux
H74998011
Light Bar Mini LED 12 V Mag Amber Optilux
27998001
Light Bar Mini LED G2 Mlb170 12 V Fxd Amber
H27998011
Light Bar Mini LED G2 Mlb 170 12 V Mag Amber
H57921001
Cntrl Mlb 170 G2 Mini Lightbar with Cable
H74999021
Light Bar Mini Strobe 12 V Fxd Amb Optilux
H74999001
Light Bar Mini Hal 12 V Fxd Amb Optilux
LIGHTING
HELLA AND OPTILUX OWS PRODUCT
WARNING LIGHTS
APPEARS CLEAR WHEN “OFF”,
BUT COLORED WHEN “ON”.
PART NO. DESCRIPTION
H22890001
MS6 Mini LED Lighthead 12-24 V Amber
H22890021
MS6 Mini LED Lighthead 12-24 V Blue
H22890031
MS6 Mini LED Lighthead 12-24 V White
H22890041
MS6 Mini LED Lighthead 12-24 V Red
H22890051
MS6 Mini LED Lighthead 12-24 V Amber/White
H22890061
MS6 Mini LED Lighthead 12-24 V Red/Blue
H22890071
MS6 Mini LED Lighthead 12-24 V Red/White
H22891001
MS3 LED Lighthead 12-24 V Amber
H22891031
MS3 LED Lighthead 12-24 V White
(18H/48:282<6/=/8401:8L487@
100
HELLA Code: 526
Website: www.hella.com
Online Catalogue: www.myhellalights.com
LIGHTING
H27091231
H27091221
H27091091
H27091101
LED BEACONS
PART NO. DESCRIPTION
H27091231
Beacon K-LED 500 Twin 12/24 V F Amber with cover
H27091221
Beacon K-LED 500 Twin Mag 12/24 V Amber
H27091091
Beacon K-LED 450 Plus F 12-24 V Amber
H27091101
Beacon K-LED 450 Plus M 12-24 V Amber
H27091071
Beacon LED K-LED 450 F 12-24 V Amber
H27071021
Beacon LED K-LED 360e F 12/24 V White
H93020061
Lens Smooth Cover K-LED 400/450 Clear
A1400
H27071021
A0934A
A0935A
H93020061
A0934
BRIGADE -BACK UP ALARM
PART NO. DESCRIPTION
Backup Alarm Broadband 12-24 V Sa-Bbs-107
A1399
Backup Alarm Broadband 12-24 V Sa-Bbs-97
A0935A
Backup Alarm Bbs-97
A0934A
Backup Alarm Broadband 12-24 V Bbs-92
A3398
Cam Kit Rearview Med Size Vbv-770b-010n
A3398
STEWART WARNER
HELLA
101
A1400
STEWART WARNER Code: 805
Website: www.stewartwarnercanada.com
Pressure switches feature Kapton diaphragms
and vacuum switches feature fluorosilicone
rubber for compatibility with a wide variety of
fluids such as air, motor oils, transmission oils,
jet fuels and other similar fluids.
• Available in various factory set points
• Single or dual circuit*
• 1 to 3 terminal**
TEMPERATURE SWITCHES
Normally open contact, voltage independent, solid
brass body, gold-plated contacts and excellent accuracy
and repeatability. Available in screw or spade type
terminal in various thread sizes.
LIGHTING
PRESSURE AND VACUUM
SWITCHES
.6:G/8565461:/EK1
<544;7F65M87
..8;6:/1:/EK1
<544;7F65M87
TEMPERATURE SENDERS
Constructed of high-quality, corrosion-resistant brass for
maximum durability and outstanding electrical and thermal
conductivity. Phosphor bronze contact spring provides
resistance to shock and vibration.
HOURMETERS HOBBS
ROUND
HOURMETERS HOBBS
RECTANGLE
3 SCREW BLACK, 10,000 HOURS
• #85097 10-80 VDC
2 SCREW BLACK, 10,000 HOURS
• #85094 10-80 VDC
3 SCREW BLACK, 100,000 HOURS
• #85134 10-80 VDC
2 SCREW BLACK, 100,000 HOURS
• #85127 10-80 VDC
3 SCREW BLACK, 10,000 HOURS
• #20017 108-132VAC 60 Hertz
• #20019 216-264VAC 60 Hertz
2 SCREW BLACK, 10,000 HOURS
• #20001 108-132VAC 60 Hertz
• #20007 216-264VAC 60 Hertz
4” X 6”
HALOGEN LAMPS
DELUXE AND HEAVY
DUTY GAUGES
•
•
•
•
Easy to read
White-on-black graphics
Nighttime lighting
Available: voltmeter, ammeter,
oil and water pressure, tachometers,
and temperature gauges
STEEWART WARNER
Complete lamp replacement
assembly and replacement lamps
available in wide, spot and trapezoid
types. Because they’re designed
for use in heavy construction and
farming equipment, they’re also
designed to take shock, vibration
and other extreme service
conditions in stride.
102
PROBUILT PROFESSIONAL LIGHTING
Code: 438
Website: www.probuiltlighting.com
"
LIGHTING
WOBBLELIGHT®
27” PORTABLE JOBSITE LIGHTING
DEFENDER®
RECHARGEABLE
LED HAND LAMP
Durable and virtually indestructible, the 27” tall Wobbelight is a
self righting, highly durable light that can take rough handling at
home or on the job. The high output, cool burning fluorescent
light is ideal for use in small, confined areas. No hot surfaces
and low energy consumption.
No Set-up. Just plug it in.
Defender® Rechargeable LED Hand Lamp is water resistant and
durable, with a tough housing and high-output LED’s. It is perfect for
small jobs and standard issue equipment for your tradesperson or
maintenance teams.
"
DEFENDER® UPLIGHT V2 - 2 FT
•
•
•
•
•
WOBBLELIGHT®
36” PORTABLE JOBSITE LIGHTING
2 ft 18 watt fluorescent portable task light
1,300 lumens
15 ft power cord
Built in electrical receptacle for linking units
Adjustable nylon strap, removable threaded hooks for hanging
Bright and dependable, the self-righting Wobblelight® delivers
maximum light output in a highly durable and portable package
with no hot surfaces.
PART NO. DESCRIPTION
"
DEFENDER® UPLIGHT V2 - 4 FT
•
•
•
•
•
4 ft 36 watt fluorescent portable task light
3,250 lumens
15 ft power cord
Built in electrical receptacle for linking units
Adjustable nylon strap, removable threaded hooks for hanging
"
DEFENDER® ECO UPLIGHT - 4 FT
T
•
•
•
•
•
4 ft 36 watt fluorescent portable task light
3,250 lumens
15 ft power cord
Locking tri-pod base
Adjustable nylon strap,
removable threaded hooks for hanging
111302
500 W halogen work light
111102
175 W metal halide work light
111104
400 W metal halide work light
REFLECTOR SHIELD
T Wobblelight® Reflector Shield conveniently
The
takes your Wobblelight® from 360º of light
source to 180º without losing any light. The
built in reflective coating
on the inside of the arced
PART NO. SIZE
nylon reflector allows you
111808
36”
to maintain 100% of your
light source and focus it.
111807
27”
PART NO. DESCRIPTION
"
DEFENDER® UPLIGHT V2 - BASE
111901
175 W REPLACEMENT BULB
Replacement bulb for 36” Wobbelight 175
watt metal halide work light
111903
400 W REPLACEMENT BULB
Replacement bulb for 36” Wobbelight 400
watt metal halide work light
111904
500 W REPLACEMENT BULB
Replacement bulb for 36” Wobblelight 500
watt halogen work light
Wobble base for use with Defender® Uplight V2s
• 2 ft and 4 ft versions
"
DEFENDER® LED FLOOR LIGHT
• 64 high output LEDs
• 350 lumens
• 10 ft power cord
"
DEFENDER® FLUORESCENT
FLOOR LIGHT
85 W REPLACEMENT BULB
• 38 watt fluorescent
• 2,850 lumens
• 10 ft power cord
PROBUILT
103
Replacement bulb for 27” Wobblelight 85 watt
fluorescent work light
$
HANG-A-LIGHT® 105 WATT FLUORESCENT
TEMPORARY AREA WORK LIGHT
HANG-A-LIGHT® 400 WATT METAL HALIDE
TEMPORARY AREA WORK LIGHT
•
•
•
•
•
•
•
•
•
•
6,900 lumens
20-30 ft lighting range
Built in electrical receptacle
5 ft power cord
UL/cUL listed
42,000 lumens
50-100 ft lighting range
Modifiable for 120/208/240/277 volts
6 ft power cord
cUL listed
PRIME WIRE Code: 139
Website: www.primewirecable.com
ARCTIC BLUE™ TPE-rubber cords provide superior resistance to sunlight, ozone,
cracking, oils and chemicals, and are
outstanding in resistance to abuse, rough
handling and wear. Temperature range of -58ºF
to +221ºF (extreme climate).
BULLDOG TOUGH®
U-GROUND ADAPTERS
• 2 ft 12/3 STOW
• Double Jacket Triple Tap Adapter
PART NO. DESCRIPTION
LT530725
25 ft 14/3 SJEOW
LT530730
50 ft 14/3 SJEOW
LT530735
100 ft 14/3 SJEOW
LT530825
25 ft 12/3 SJEOW
LT530830
50 ft 12/3 SJEOW
LT530835
100 ft 12/3 SJEOW
LT630825
Triple tap, 25 ft 12/3 SJEOW
SHOCK SAFE® IN-LINE
G.F.C.I. ADAPTER
• 3 ft 12/3 SJTW
• Yellow Inline G.F.C.I. Triple Tap Adapter
Primelite Power Indicator Light
ELECTRICAL
ARCTIC BLUE™ ALL-WEATHER TPE-RUBBER
EXTENSION CORDS WITH PRIMELIGHT™
POWER INDICATOR LIGHT
&$
WORK LIGHTS
PATIO AND
DECK CORDS
PART NO. DESCRIPTION
TL020625
25 ft 16/3 SJEOW, Metal Guard Work Light
TL020630
50 ft 16/3 SJEOW, Metal Guard Work Light
TL210506
13 Watt Compact Fluorescent Work Light
6 ft 18/2 SJT Cord
• 35 ft 16/3 SJTW
• Beige Patio and Deck Triple
Tap Extension Cord
"
WIRING DEVICES
• NEMA U-Ground Wiring Devices - Nylon Plug Design
• “Autogrip”, “Safetygrip” and “Quickgrip” types
• Neoprene gasket seals the cord hole and keeps dust
and moisture out of terminal area
PART NO. DESCRIPTION
&
&
WDA6269G
5-15R Connector Nylon Safetygrip 15 A, 125 V
WDA6266G
5-15P Plug Nylon Safetygrip 15 A, 125 V
OUTDOOR EXTENSION CORDS AND OUTDOOR TRIPLE TAP EXTENSION CORDS
PRIME® outdoor extension cords provide added protection against rough use, moisture, ozone and gives added flexibility at below freezing temperatures.
Molded-on and bonded vinyl plugs and connectors resist breaking or pulling off cord.
PART NO. DESCRIPTION
10 ft 16/3 SJTW Orange Outdoor Extension Cord
EC501625
25 ft 16/3 SJTW Orange Outdoor Extension Cord
EC501630
50 ft 16/3 SJTW Orange Outdoor Extension Cord
EC501635
100 ft 16/3 SJTW Orange Outdoor Extension Cord
EC502608
8 ft 16/3 SJTW Black Outdoor Extension Cord
EC502615
15 ft 16/3 SJTW Black Outdoor Extension Cord
EC600825
25 ft 12/3 SJTW Yellow Triple Tap Extension Cord
EC600830
50 ft 12/3 SJTW Yellow Triple Tap Extension Cord
EC600835
100 ft 12/3 SJTW Yellow Triple Tap Extension Cord
PRIME WIR
RE
EC501610
104
ENERGIZER CANADA Code: 831
Website: www.energizer.ca
ENERGIZER INDUSTRIAL ALKALINE BATTERIES
ELECTRICAL
"(
"(
"(
"(
"(
AAA 1.5 V
BATTERY
AA 1.5 V
BATTERY
C 1.5 V
BATTERY
D 1.5 V
BATTERY
9V
BATTERY
ENERGIZER RECHARGEABLE
PART NO. DESCRIPTION
)
"
MINI COIN BATTERY
3 V LITHIUM
BATTERY
NH12BP4
4 AAA RECHARGE BATTERIES
NH15BP4
4 AA RECHARGE BATTERIES
NH22NBP
9 V RECHARGE BATTERIES
NH35BP2
2 C RECHARGE BATTERIES
NH50BP2
2 D RECHARGE BATTERIES
$
RECHARGER
Charges AAA, AA, C, D and 9 V NiMH batteries
ENERGIZER
105
ALKALINE 6 V
LANTERN BATTERY
EVEREADY 6 V
SUPER DUTY BATTERY
AA 1.5 V LITHIUM
BATTERY
AAA 1.5 V LITHIUM
BATTERY
PHILLIPS INDUSTRIES Code: 563
Website: www.phillipsind.com | Online Catalogue: www.phillipsind.myepub.net
ELECTRICAL ASSEMBLIES, CONNECTORS & AIR ASSEMBLIES
PERMACOIL
PART NO. DESCRIPTION
• Recommended for ABS applications
• Flexible from -87°F to 150°F
(-66°C to 66°C)
• Good recoil memory, chemical
and abrasion resistance
• UNBREAKABLE PERMAPLUGS™
or heavy-duty, zinc die-cast housing
POLAR AIR® COILS
30-4621
ABS, 15' with die-cast plugs
24-4621
Non-ABS, 15' with die-cast
plugs - black
11-5150
15’ Pair
(red and blue)
30-4921
ABS, 15' 48" lead, with
die-cast plugs
11-5400
15’ Pair (red and
blue), 40” lead
PART NO. DESC.
ELECTRICAL
• Perfect for
extreme weather
conditions
• Remains flexible at -85°F (-65°C)
• Excellent ratings for recoil memory,
chemical resistance and abrasion
resistance
• Features POWER GRIP™ which provides
superior coupling/uncoupling leverage
• Large coil diameter prevents kinking and
provides greater recoil
• Patented jacketing prevents fractures and
provides durable, rubber feel
• Meets SAE J844 and J1131 specifications
• Meets FMVSS 571.106 specifications
SOCKETS
• 2 Hole
• Wire insertion split pin
JUNCTION BOX
2/0 CLEAR-VU™
BATTERY JUMPERS
PART NO. DESCRIPTION
• Other sizes available
• Replaces OEM battery cables
• Translucent cable allows you to see corrosion
Clear, four lug, 26"
9-371
Translucent, smoke, 4 lug, 26"
9-372
Translucent, red, 4 lug, 26"
• 2 Hole
• Wire insertion
15-961
CLEAR-VU™ junction box
15-960
7 pole, for ring term, black
SOCKET BOOT
• Rubber boot for 15-720
PART NO. DESCRIPTION
9-370
STA-DRY® SOCKETS
STA-DRY® ZINC DIE-CAST
SOCKETSBREAKER
• With 20 Amp circuit breaker
• Split pin
GLADHAND SEALS
GLADHANDS
• Wide lip
• Tapered base
• Rubber
PART NO. DESCRIPTION
12-006
Service, blue
12-008
Emergency, red
STAY-DRY®
DOCUMENT
HOLDER
• Waterproof document, license and ownership holder
• Tether strap included
PHILLIPS INDUSTRIEES
CABLE SUPPORTS
AND ACCESSORIES
PART NO. DESCRIPTION
15-042
17-0400
40" chrome
17-148
Kit with single HD
spring, 20" with
Qwik-Snap
17-420
Kit with dual 16"
spring, with QwikSnap
PLUGS
PART NO. DESCRIPTION
15-730
16-730
Heavy duty, reinforced zinc die-cast
plug with cable guard
Permaplug™
2 plug
2 Gladhand holder
106
PICO Code: 931
Website: www.picocanada.com
ELECTRICAL
TOOLS, TAPE
PART NO. DESCRIPTION
PART NO. DESCRIPTION
335-31
Heavy duty crimp tool, crimps 12 - 4 GA lugs and terminals
1700-CS
vinyl 22 - 18 red
340T-E
Crimper, crimps 22 - 10 GA closed end connectors and heat shrinkable terminals
1800-CS
vinyl 16 - 14 blue
187-E
Crimper, crimps 24 - 14 GA open barrel terminals, makes precision “F” crimps, 5 different crimp nests
1900-CS
vinyl 12 - 10 yellow
8247-31
Torch, Piezo electric ignition gas burner temperature 1,300ºC (2,450ºF), burning time 60-70 minutes,
butane not included
5800-CS
heat shrink 22 - 18 red
5900-CS
heat shrink 16 - 14 blue
3466-0-RL
All weather PVC insulated tape, package of 10 rolls, each roll is individually cello wrapped 66’ x 3/4”
365-31
22-10 INS & Non-INS extra HD crimp tool
650T-E
20 AWG-3/0 cable cut tool
455T-E
26-10 wire stripper
BATTERY TERMINALS
PART NO. DESCRIPTION
887-11
Top post brass battery terminal with 1/4 turn quick disconnect
891N-11
Battery terminal (negative) with bright tooled brass with accessory capability
899P-BP
Marine battery terminal with 3/8” brass plated wing nut (positive) alloy
731-31
Group size 24 battery box, 11” x 6 3/4” x 8”
880-HD-BP
1pk, 1-4/0 HD universal battery terminal
880-BP
2pk, 6-1/0 universal battery terminal
BOOSTER CABLES
PART NO. DESCRIPTION
8180K-E
1 GA booster cables 800 Amp, 20’, 100% pure copper conductors, remains flexible in cold weather to
-40ºC each booster cable comes in its own handy vinyl carrying case
8180-32
Pair of booster clamps 800 Amp
8177-32
Pair of booster clamps 500 Amp parrot jaw clamp
32551-91
Modular terminals and housings
8729-91
800 Amp negative and positive reach, style B cable clamps
8761-31
1/0 20' super flex booster cable 800 Amp
SWITCHES: TOGGLES, PUSH/PULL, PANELS
PART NO. DESCRIPTION
PICO
107
BUTT CONNECTORS
9432-11
On/off toggle switch, 12 V, 20 Amp, SPST, 5/8” bat handle with indicator plate, 1/2” mount hole
9435-BP
On/off toggle switch, 12 V, 35 Amp, SPST, 2 position / 2 screw terminals, chrome plated bat handle
9436-BP
Extra heavy duty toggle 2 position / 2 screw terminals on/off, SPST, 50 Amp, chrome plated bat handle
9449-31
Master disconnect switch on/off, SPST, 6- 36 Vs, 190 Amp continuous, 1,000 Amp momentary
9459-11
Weatherproof switch ON/OFF, 12 V-25 Amp; 24 V-15 Amp SPST
9460-11
Weatherproof switch, MOM ON-OFF, MOM ON
9450-11
Master battery disconnect switch
9497-31
12 V 85 Amp solenoid switch
PICO Code: 931
Website: www.picocanada.com
TRAILER CONNECTORS AND ADAPTERS
PART NO. DESCRIPTION
ELECTRICAL
9476-11
Die cast 6 pole male trailer plug with spring
9475-11
Die cast 6 pole male trailer plug
9477-E
Die cast 6 pole female trailer socket 12-24 V
35 Amp
9482-BP
Abs plastic 7 pole male RV blade plug
9483-BP
Abs plastic 7 pole female RV blade socket
7704-11
Abs plastic 7 pole 7 way pin type male plug
with 4 way flat female
7717-11
Abs plastic 7 pole 7 way RV blade male plug
with 4 way flat female
1871-BP
2 pin trailer connector
1873-BP
4 pin trailer connector
990-E
7 pin junction box #10-32, studs corrosion
resistant molded cover and housing
7712-31
7 way RV / 4 way flat trailer connector combo
9490-31
7 pole RV bracket, metal
CABLE TIES
PART NO. DESCRIPTION
LOOM
PART NO. DESCRIPTION
5141-B
3/8" ID split loom, black
5141-34
3/8" ID split loom, black
7257-36
Metal PAWL UV black cable ties
(package of 100 pcs of 11”)
7066-0-C
Cable ties (100 pcs of 7.5” UV black
military spec MS3367-1-0)
7272-34
Stainless steel cable tie, 14", 120 lb
7282-34
Stainless steel cable tie, 14", 485 lb
7295-36
7.5", 50 lb cold weather black ties
7298-36
14", 120 lb cold weather black ties
7066N9-C
7.5", neon pink cable ties
DISPLAYS BOARDS AND KITS
PART NO. DESCRIPTION
31505-91
Deutsch kit with tool, 39 pcs
31503-91
WeatherPack kit, 93 pcs
31502-91
Terminal kit with 465T crimp tool, 196 pcs
WIRE, CABLE, CORD ENDS
PART NO. DESCRIPTION
Welding cable (100’ x 2/0)
8114-5-C
Primary wire rated 80oC, meets SAEJ 1128
specifications, 14GA Red X 100’
8905-C
Rubber cord type SJOOW 90C300 V
8956-11
3-way plug, 15 Amp, female, U-ground, straight
blade cord connector, industrial grade, 125 V
8957-11
3-way plug, 15 Amp, male, U-ground, straight
blade 3 prong plug, industrial grade, 125 V
PROFESSIONAL KITS
Ask your local
representative about our
product storage solutions!
PICO
8059-C
108
PICO Code: 931
Website: www.picocanada.com
FUSES, CIRCUIT BREAKERS, RELAYS & HOLDERS
ELECTRICAL
RELAYS
PART NO. DESCRIPTION
925-11
Relay 12 V 40/30 Amp
926-91
Relay 12 V 40/30 Amp with 5 pin connector
928-91
Relay 12 V 40/30 Amp, weatherproof with pigtail
921-11
Relay 5 pin, 12 V 80/60 Amp
9901-11
Relay socket with terminals
FUSE KITS
PART NO. DESCRIPTION
33501-91
160 pc fuse assortment
33503-91
152 pc blade fuse assortment
60601-91
80 pc standard blade, mini blade fuse assortment
SLOW BLOW FUSES
PART NO. DESCRIPTION
9700-11
80 Amp, bolt on fuse
9722-11
100 Amp, bold on fuse
BLADE FUSES
PART NO. DESCRIPTION
120-BP
20 Amp, small blade fuse, yellow (5 pk)
966-BP
20 Amp, blade fuse, yellow (5 pk)
9947-14
20 Amp, low profile small blade, yellow (5 pk)
230-11
30 Amp, big blade fuse, green
CIRCUIT BREAKERS
PART NO. DESCRIPTION
9628-11
Type I mini breaker, 30 A
3788-BP
30 Amp, Type I ATC/ATO plug-in circuit breaker
3794-11
30 Amp, Type I universal automatic reset circuit breaker
3401-31
100 Amp, Type III manual reset circuit breaker
3404-31
150 Amp, Type III manual reset circuit breaker
FUSE HOLDERS
PART NO. DESCRIPTION
PICO
109
ADD A CIRCUITS
CIRCU
- FUSE BLOCKS
131-11
16 G 15 Amp, small blade holder
PART NO. DESCRIPTION
977-BP
16 G 15 Amp, blade fuse holder
981-11
16 GA 10 Amp, small blade add circuit
988-BP
12 G 25-30 Amp with cap blade fuse holder
982-11
16 GA 10 Amp, blade fuse add circuit
9711-31
40 Amp - 200 Amp, ANM/AMG fuse holder
9950-11
30 Amp, Type I mini breaker
206-31
8 GA 60 Amp, big blade in-line fuse holder
3410-31
6 W ATC/ATO blade fuse block, 25 Amp perr circuit
PICO Code: 931
Website: www.picocanada.com
SHRINK TUBES
ELECTRICAL
MAGMAFLO-DR
PART NO. DESCRIPTION
8381-43
6MM 4:1 BLK Diesel Resistant MagmaFlo-DR (6 pc x 6")
8382-43
8MM 4:1 BLK Diesel Resistant MagmaFlo-DR (6 pc x 6")
8383-43
12MM 4:1 BLK Diesel Resistant MagmaFlo-DR (6 pc x 6")
8384-43
18MM 4:1 BLK Diesel Resistant MagmaFlo-DR (6 pc x 6")
MAGMAFLO
PART NO. DESCRIPTION
8361-43
6MM 4:1 BLK MagmaFlo (14 pc x 6")
8362-43
8MM 4:1 BLK MagmaFlo (12 pc x 6")
8363-43
12MM 4:1 BLK MagmaFlo (10 pc x 6")
8364-43
18MM 4:1 BLK MagmaFlo (5 pc x 6")
SHRINK TUBE KITS
PART NO. DESCRIPTION
30606-91
4:1 Diesel Resistant MagmaFlo-DR Heat Shrink Kit, 22 pc
30607-91
4:1 MagmaFlo Shrink Tube Kit, 22 pc
30602-91
Black & Red Dual Wall 3:1 Shrink Tube Kit, 30 pc x 6"
3:1 SHRINK TUBE
PART NO. DESCRIPTION
8330-A
3/16" Black DW 3:1 (6 pc x 6")
8331-A
1/4" Black DW 3:1 (6 pc x 6")
8332-A
3/8" Black DW 3:1 (6 pc x 6")
8333-A
1/2" Black DW 3:1 (6 pc x 6")
8335-43
1" Black DW 3:1 (6 pc x 6")
SHRINK TUBE
ASSORTMENT WITH
DISPLAY STAND
• 2:1 SW, 32 pcs
• 3:1 DW, 26 pcs
110
POWERBRIGHT Code: 908
Website: www.powerbright.com
PW 1500-12 – 1500 WATT 12 VOLT POWER INVERTER
PEAK LOAD POWER RATE: 3000 WATT
ELECTRICAL
PW 2300-12 – 2300 WATT 12 VOLT POWER INVERTER
PEAK LOAD POWER RATE: 4600 WATT
• Soft Start Technology
• Overload Protection
• Short Circuit Protection
• High and Low Voltage Protection
• 3 High Speed Thermally Activated
Turbo Cooling Fans
,
PW 400-12 – 400 WATT
12 VOLT POWER INVERTER
XR 175-12 – 175 W
12 VOLT INVERTER
PEAK LOAD POWER RATE: 800 WATT
PEAK POWER: 350 WATT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Soft Start Technology
Overload Protection
Short Circuit Protection
Includes Battery Clips
High and Low Voltage Protection
Electronic Noise Filter
Dual AC 110 V Outlets
Anodized Aluminum Case with
Heat Sink Design (Heat Dissipation)
Digital LED Volt / Amp Display
Includes 12 V DC Cigarette Lighter Connector
High Speed Thermally Activated Turbo Cooling Fan
Power Cables for Higher Wattage (above 100 W)
Soft Start Technology
Overload Protection
Short Circuit Protection
Thermally activated cooling fan
High and Low Voltage Protection
Single AC 110 V Outlet
Ultra Slim Technology
Carbon Fiber Design
Includes 12 V DC Cigarette Lighter Connector
Includes Battery Clips
Power Cables for Higher Wattage (above 100 W)
USB Charging Port
,
PW 3500-12 – 3500 WATT
12 VOLT POWER INVERTER
XR 400 – 400 WATT
12 VOLT POWER INVERTER
PEAK LOAD POWER RATE: 7000 WATT
PEAK LOAD POWER RATE: 800 WATT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
POW
WERBRIGHT
111
• Anodized Aluminum Case with Heat
Sink Design (Heat Dissipation)
• Dual AC 110 V Outlets
• LED Power / Fault Indicator
• Digital LED Volt / Amp Display
Soft Start Technology
Overload Protection
Short Circuit Protection
High Speed Thermally
Activated Turbo Cooling Fan
High and Low Voltage Protection
LED Power / Fault Indicator
Digital LED Volt / Amp Display
Anodized Aluminum Case with
Heat Sink Design (Heat Dissipation)
Four AC 110 V outlets
Soft Start Technology
Overload Protection
Short Circuit Protection
Thermally Activated Cooling Fan
High and Low Voltage Protection
Dual AC 110 V Outlets
Carbon Fiber Design
Includes 12 V DC Cigarette Lighter Connector
Includes Battery Clips
Power Cables for Higher Wattage (above 100 W)
USB Charging Port
APS 300 – 300 WATT
PURE SINE INVERTER
APS 2200-12 – 2200 WATT
PURE SINE INVERTER
PEAK LOAD POWER RATE: 500 WATT
PEAK LOAD POWER RATE: 4400 WATT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Soft Start Technology
Overload Protection
Short Circuit Protection
High Speed Thermally
Activated Turbo Cooling Fan
High and Low Voltage Protection
Anodized Aluminum Case with Heat Sink Design (Heat Dissipation)
120 V AC Outlet
Available in both 12 V and 24 V DC
Soft Start Technology
Overload Protection
High and Low Voltage Protection
Electronic Noise Filter
LED Power / Fault Indicator
High Speed Thermally Activated Turbo Cooling Fan
Anodized Aluminum Case for Maximum Heat Dissipation
Wireless Remote Control (optional)
Three 120 V AC Outlets
COLE HERSEE Code: 163
Website: www.colehersee.com
TOGGLE SWITCH
•
•
•
•
•
•
•
•
•
2 screw terminals
25 A at 12 V DC
Silver contacts
Standard 11/16” (17.5mm)
length handle
Fits panels through 1/4” (6.4 mm)
Keyway located in the
down position
Plastic housing with plated
steel cap
Nickel-plated brass hardware
Mounting stem: 15/32” 32 thread, 15/32” (11.9 mm) long,
nickel-plated brass
TERMINAL
BLOCKS
• Terminal block with common,
solid brass busbar
• Four 10-32 stud terminals
with hex nuts and lock
washers
• Moisture-repellent thermoset
plastic insulator base
• Two eyelets for mounting
with 3/16” (4.76 mm) screws
(not included)
• Eyelets are 3.125”
(79.4 mm) on centers
• 3 7/8” L x 5/8” W x 27/32” H
(44.4 x 15.9 x 21.4 mm)
• 4-gang
BATTERY
DISCONNECT
SWITCH
CIRCUIT
BREAKER - 30 A
•
•
•
•
•
SAE Type I cycling circuit breaker
12 V
Two 10-32 stud terminals
Plated steel case
Snap in type, mounts in a bracket
such as Cole Hersee 30090 series
• Indentations on the case hold the
breaker securely
• 1.25” L x 0.78” W x 1.33” H
(31.8 x 19.8 x 33.8 mm)
MASTER DISCONNECT
SWITCHES PROTECT
YOUR VEHICLES
• Master disconnect switch
• Single pole, two positions:
off, on
• Two 3/8” - 20 copper stud
terminals
• Plated steel case, diecast lever
• UL rated (UL 707B).
175 A continuous, 800 A
intermittent, 15 seconds on,
5 minutes off
• UL ratings are conservative:
Can handle higher amperages:
• 6 to 36 V DC
• Designed to prevent fires,
tampering, theft, battery drain
• Brass mounting stem, 3/4” 16 thread, 23/32” (18.3 mm)
long fits panels through 3/16”
(4.7 mm) thick
MOMENTARY
SWITCHES
•
•
•
•
•
•
•
•
•
•
Push button switch
SPST
Off, momentary on, normally off
10 A at 12 V DC
Includes brass housing, stem,
plunger button and mounting
hardware
PVC-coated for added protection
against moisture and contaminants
2 wire leads, 12” (304.80 mm)
long
With black snap-on rubber cap
Mounting stem: 5/8” - 32 thread,
15/16” (23.81 mm) long
Fits panels through 1/2”
(12.70 mm) thick
ELECTRICAL
LOW VOLTAGE
BATTERY PROTECTION
• Low voltage disconnect switch with
harness 125 A
SOLENOID - 12 V
• Continuous duty electromechanical
solenoid, 85 A
• Ignition and ground terminals:
copper 10-32 thread
• Contact terminals: copper 5/16” 24 thread
• SPST insulated
SMART BATTERY
ISOLATOR
PART NO. DESC.
BATTERY SWITCH
48525
85 A
• Master disconnect switch 300/1,000 A
waterproof IP67
48530
200 A
8687
PART NO. DESCRIPTION
PART NO. DESCRIPTION
58312-G2
SPST On-Off independent green LED*
58312-A4
Amber LED*
58312-R2
SPST On-Off independent red LED*
58312-C4
Clear LED*
58312-RR2
SPDT On-On dependent red/red LED*
58312-G4
Green LED*
58312-RR
SPDT On-Off-On dependent red/red LED*
58312-R4
Red LED*
.6/1/6GM9
.+:+KK808:28:906/1/6GM9
CO
OLE HERSEE
ROCKER
SWITCHES
WITH LED
PILOT LIGHTS
112
UNITED ABRASIVES/SAIT Code: 640
Website & Online Catalogue: www.unitedabrasives.com
HARD PARTS
GRINDING WHEELS
•
•
•
•
•
PART NO. DESCRIPTION
20060
4-1/2" x 1/4" x 7/8" – A24N
20070
5" x 1/4" x 7/8" – A24N
20078
6" x 1/4" x 7/8" – A24N
20081
7" x 1/4" x 7/8" – A24N
20013
4" x 1/4" x 5/8" – A24R
20063
4-1/2" x 1/4" x 7/8" – A24R
20073
5" x 1/4" x 7/8" – A24R
20079
6" x 1/4" x 7/8" – A24R
20080
7" x 1/4" x 7/8" – A24R
20065
UNITED ABRASIVES
113
A24N – Fast Grinding
A24R – Long Life
A24T – Edge Grinding
24Turbo™ – Hard Edge
A46N - Aluminum
4-1/2" x 1/4" x 7/8" – A24T
20075
5" x 1/4" x 7/8" – A24T
20280
6" x 1/4" x 7/8" – A24T
20285
7" x 1/4" x 7/8" – A24T
25803
4-1/2" x 1/4" x 7/8" – A24Turbo™
25805
5" x 1/4" x 7/8" – A24Turbo™
25806
6" x 1/4" x 7/8" – A24Turbo™
25807
7" x 1/4" x 7/8" – A24Turbo™
20062
4-1/2" x 1/4" x 7/8" – A46N
20072
5" x 1/4" x 7/8" – A46N
20083
7" x 1/4" x 7/8" – A46N
THIN HIGH SPEED
CUT-OFF WHEELS
•
•
•
•
A24R – General Purpose
A36T – Fast Cutting
A60T – Burr Free
Saitech Ultimate Performance™
PIPELINE CUTTING/NOTCHING/
GRINDING WHEELS
• A24R Pipeline – Long Life
• Saitech™ Pipeline
PART NO. DESCRIPTION
PART NO. DESCRIPTION
22015
4" x 1/8" x 5/8" – A24R Pipeline
23060
3" x 1/8" x 3/8" – A24R
22030
4-1/2" x 1/8" x 7/8" – A24R Pipeline
23040
3" x 1/16" x 3/8" – A36T
22040
5" x 1/8" x 7/8" – A24R Pipeline
23005
2" x 1/16" x 1/4" – A60T
22042
6" x 1/8" x 7/8" – A24R Pipeline
23011
2" x 0.035" x 3/8" – A60T
22055
7" x 1/8" x 7/8" – A24R Pipeline
23021
2-1/2" x 1/16" x 3/8" – A60T
22065
9" x 1/8" x 7/8" – A24R Pipeline
23031
2-1/2" x 0.035" x 3/8" – A60T
22274
5" x 1/8" x 7/8" – Saitech™ Pipeline
23041
3" x 1/16" x 3/8" – A60T
23051
3" x 0.035" x 3/8" – A60T
23066
4" x 1/16" x 3/8" – A60T
23062
4" x 1/16" x 5/8" – A60T
23152
3" x 0.035" x 1/4" –
Saitech Ultimate Performance™
0.045" CUT-OFF WHEELS
THE ULTIMATE CUT.
BEST IN CLASS CUTTING PERFORMANCE.
• Z-Tech – High Performance • A60S – General Purpose
• A46N – Aluminum
PART NO. DESCRIPTION
23334
4-1/2" x 0.045" x 7/8" – Z-Tech Type 27
23335
5" x 0.045" x 7/8" – Z-Tech Type 27
23336
6" x 0.045" x 7/8" – Z-Tech Type 27
23337
7" x 0.045" x 7/8" – Z-Tech Type 27
23324
4-1/2" x 0.045" x 7/8" – Z-Tech Type 1
23325
5" x 0.045" x 7/8" – Z-Tech Type 1
23326
6" x 0.045" x 5/8" – Z-Tech Type 1
LAMINATED DISCS SAIT-LOK-R™
23327
6" x 0.045" x 7/8" – Z-Tech Type 1
• 2A
23328
7" x 0.045" x 5/8" – Z-Tech Type 1
PART NO. DESCRIPTION
22021
4-1/2" x 0.045" x 7/8" – A60S Type 27
52271
2" x 36 Grit - 2A, General Purpose
22071
5" x 0.045" x 7/8" – A60S Type 27
52278
3" x 36 Grit - 2A, General Purpose
22047
6" x 0.045" x 7/8" – A60S Type 27
55270
2" x 24 Grit Z, Premium
22053
7" x 0.045" x 7/8" – A60S Type 27
55271
2" x 36 Grit Z, Premium
23101
4-1/2" x 0.045" x 7/8" – A60S Type 1
55277
3" x 24 Grit Z, Premium
23103
5" x 0.045" x 7/8" – A60S Type 1
55278
3" x 36 Grit Z, Premium
23105
6" x 0.045" x 5/8" – A60S Type 1
50320
2" x 24 Grit 2A-H, Heavy Duty General Purpose
23106
6" x 0.045" x 7/8" – A60S Type 1
50321
2" x 36 Grit 2A-H, Heavy Duty General Purpose
23107
7" x 0.045" x 5/8" – A60S Type 1
50330
3" x 24 Grit 2A-H, Heavy Duty General Purpose
22345
4-1/2" x 0.045" x 7/8" – A46N Type 27
50331
3" x 36 Grit 2A-H, Heavy Duty General Purpose
22350
5" x 0.045" x 7/8" – A46N Type 27
55450
2" x 24 Grit Z-H, Heavy Duty Premium
23314
4-1/2" x 0.045" x 7/8" – A46N Type 1
55451
2" x 36 Grit Z-H, Heavy Duty Premium
23315
5" x 0.045" x 7/8" – A46N Type 1
55460
3" x 24 Grit Z-H, Heavy Duty Premium
22230
4-1/2" x 0.045" x 7/8", Ultimate Cut
55461
3" x 36 Grit Z-H, Heavy Duty Premium
22235
5" x 0.045" x 7/8", Ultimate Cut
• Z
• 2A-H
• Z-H
UNITED ABRASIVES/SAIT Code: 640
Website & Online Catalogue: www.unitedabrasives.com
• Cartridge Roll – TA-X – Straight
• Spiral Band – TA-X
PART NO. DESCRIPTION
38074
1/2" x 1-1/2" x 1/8" x 80
Grit – Cartridge Roll – TA-X – Straight
42022
3/4" x 1-1/2" x 60 Grit – Spiral Band – TA-X
Z FIBER DISCS
42027
1" x 1" x 36 Grit – Spiral Band – TA-X
• Closed coat structure for aggressive stock removal and long life
• Bulk spindle package of 100 discs keeps discs perfectly flat
42028
1" x 1" x 60 Grit – Spiral Band – TA-X
42039
1-1/2" x 1-1/2" x 36 Grit – Spiral Band – TA-X
PART NO. DESCRIPTION
42040
1-1/2" x 1-1/2" x 60 Grit – Spiral Band – TA-X
59324
5" x 7/8" x 24 Grit – Z
59336
5" x 7/8" x 36 Grit – Z
PSA / HOOK AND LOOP DISCS
• 3S Stearate Aluminum Oxide PSA Discs
• 4S/4V Premium Stearated Aluminum Oxide PSA Discs
• Silicon Carbide Heavy Duty C-E/C-F Hook and Loop Discs
PART NO. DESCRIPTION
HARD PARTS
COATED SPECIALTY
NON-WOVEN SAND
LIGHT DISCS SAIT-LOK-R™
• Brown
• Maroon
• Blue
3S STEARATE
ALUMINUM OXIDE PSA DISCS
ABRASIVE SHEETS
•
•
•
•
36620
6" x 80C
36622
6" x 120C
36623
6" x 150C
36624
6" x 180C
PART NO. DESCRIPTION
36625
6" x 220C
84909
DA-F 50 Grit
84911
DA-F 80 Grit
4S/4V PREMIUM STEARATED
ALUMINUM OXIDE PSA DISCS
84913
DA-F 120 Grit
84915
DA-F 180 Grit
84200
AW-C 150C Grit
Aluminum Oxide (DA-F) – 9" x 11" Sheets
Aluminum Oxide (AW-C and AW-D) – 9" x 11" Sheets
Waterproof Silicon Carbide (CW-C) – 9" x 11" Sheets
Zirconium Fileboard Sheets (Z-F)
84202
AW-C 220C Grit
84204
AW-C 320C Grit
84206
AW-C 500C Grit
37605
6" x 80C
37607
6" x 120C
37608
6" x 150C
37609
6" x 180C
37610
6" x 220C
PART NO. DESCRIPTION
77306
2" Coarse (Brown)
77308
2" Medium (Maroon)
77309
2" Very Fine (Blue)
77312
3" Coarse (Brown)
77314
3" Medium (Maroon)
77315
3" Very Fine (Blue)
SILICON CARBIDE HEAVY DUTY
C-E/C-F HOOK AND LOOP DISCS
AW-C 80D Grit
34512
5" x 60 Grit
AW-C 100D Grit
34514
5" x 100 Grit
84105
AW-C 120D Grit
34518
5" x 220 Grit
84249
CW-C 80C Grit
34522
5" x 400 Grit
84251
CW-C 120C Grit
84253
CW-C 180C Grit
84255
CW-C 240C Grit
84257
CW-C 400C Grit
84173
2-3/4” x 17-1/2” x 80D Grit
Zirconium Fileboard Sheet
UNITED ABRASIV
VES
84103
84104
114
UNITED ABRASIVES/SAIT Code: 640
Website & Online Catalogue: www.unitedabrasives.com
ENCORE FLAP DISCS TYPE 29
PART NO. DESCRIPTION
HARD PARTS
• Long life
• Made with premium
zirconium grain
• Will not contaminate
stainless steel
• Grind, blend and
finish with one
product
1-1/2" x 50 YDS 80 x Handy Roll
81006
1-1/2" x 50 YDS 100 x Handy Roll
DA-F SHOP ROLLS
81206
1-1/2" x 50 YDS 120 x Handy Roll
• Excellent flexibility and durability
• Primarily for hand applications
81506
1-1/2" x 50 YDS 150 x Handy Roll
81806
1-1/2" x 50 YDS 180 x Handy Roll
82206
1-1/2" x 50 YDS 220 x Handy Roll
79111
Encore T29 4-1/2" x 7/8" Z120x
80820
2" x 50 YDS 80 x Handy Roll
79125
Encore T29 5" x 7/8" Z36x
81020
2" x 50 YDS 100 x Handy Roll
79126
Encore T29 5" x 7/8" Z40x
81220
2" x 50 YDS 120 x Handy Roll
79128
Encore T29 5" x 7/8" Z60x
81520
2" x 50 YDS 150 x Handy Roll
79129
Encore T29 5" x 7/8" Z80x
81820
2" x 50 YDS 180 x Handy Roll
79131
Encore T29 5" x 7/8" Z120x
82220
2" x 50 YDS 220 x Handy Roll
SAIT ENCORE
MINI FLAP DISCS
TUNGSTEN CARBIDE BURS
• Use for deburring and finishing on ferrous metals
PART NO. DESCRIPTION
UNITED ABRASIVES
115
PART NO. DESCRIPTION
80806
45000
SA1 DC 1/4" x 5/8" x 1/4"
45001
SA3 DC 3/8" x 3/4" x 1/4"
45002
SA5 DC 1/2" x 1" x 1/4"
45004
SB3 DC 3/8" x 3/4" x 1/4"
• Long life performance
• For use in confined spaces
• More material and longer
life than a single layer
laminated disc
PART NO. DESCRIPTION
74820
2" Encore Flap SAITLOK-R 40x
74822
2" Encore Flap SAITLOK-R 60x
74823
2" Encore Flap SAITLOK-R 80x
74825
2" Encore Flap SAITLOK-R 120x
74830
3" Encore Flap SAITLOK-R 40x
74832
3" Encore Flap SAITLOK-R 60x
74833
3" Encore Flap SAITLOK-R 80x
74835
3" Encore Flap SAITLOK-R 120x
45005
SC1 DC 1/4" x 5/8" x 1/4"
45006
SC3 DC 3/8" x 3/4" x 1/4"
45007
SC5 DC 1/2" x 1" x 1/4"
45020
SF1 DC 1/4" x 5/8" x 1/4"
NON-WOVEN SAIT STRIP
45021
SF3 DC 3/8" x 3/4" x 1/4"
• Fast, safe removal on surface contaminants
45022
SF5 DC 1/2" x 1" x 1/4"
PART NO. DESCRIPTION
45030
SG1 DC 1/4" x 5/8" x 1/4"
77270
4" x 1/4" SAIT Strip Discs
45031
SG3 DC 3/8" x 3/4" x 1/4"
77230
T27 4-1/2" x 1/2" x 7/8" SAIT Strip
45032
SG5 DC 1/2" x 1" x 1/4"
77355
3" SAIT-LOK R SAIT Strip
WIRE BRUSHES
PART NO. DESCRIPTION
KNOT WIRE - FOR LOW TO MEDIUM FLEXIBILITY AND AGGRESSIVE CUTTING ACTION
03501
2-3/4" x 0.020" CS x 5/8-11" Knot Cup
03407
4" x 0.020" x 5/8-11" Knot Cup
03409
6" x 0.020" x 5/8-11" Knot Cup 1 Row
CRIMPED - HIGHER FLEXIBILITY FOR LIGHT CLEANING
03450
4" x 0.014" CS 5/8-11" Crimp Wheel
09552
5" x 0.020" x 5/8-11" Crimp Cup
79105
Encore T29 4-1/2" x 7/8" Z36x
79106
Encore T29 4-1/2" x 7/8" Z40x
79108
Encore T29 4-1/2" x 7/8" Z60x
79109
Encore T29 4-1/2" x 7/8" Z80x
CHOP SAW WHEEL
• Fast cutting on thin metals
• 14 x 3/32 x 1 EZ, Chop Attacker
PHILLIPS & TEMRO INDUSTRIES Code: 810
Website & Online Catalogue: www.phillipsandtemro.com
TEMRO COLD WEATHER ENGINE IMMERSION HEATERS
For use in heavy duty applications of
Caterpillar and Detroit diesel models 1500 W
For use in heavy duty applications of
Cummins engines 1500 W
TEMRO INDUSTRIAL
TANK HEATER
TEMRO MAGNETIC HEATER
• Series 41 1500 W shown
• Additional configurations available
HARD PARTS
For use in heavy duty applications of
Caterpillar and John Deere models 1500 W
SUPER HEAT MAGNET
• 200 W - 120 V AC with quick grip handle to
protect hands from heat
TEMRO LOWER
RADIATOR HEATER
PART NO. FITS HOSE SIZE
• Installs in minutes for
dependable starts
3200001
1"
375
3200002
1-1/4"
375
3200003
1-1/2"
600
3200004
1-3/4"
600
3200005
2"
600
WATT
TEMRO DIESEL STARTING
FLUID INSTALLATION KIT
TEMRO DIESEL STARTING
FLUID CYLINDERS
• Installation kit for most class 7 and 8
vehicles
• Starting fluid cylinder sold separately
• Cold weather D.O.T. approved
replacement starting fluid cylinders
• 18 oz with 1" neck
• 1" x 20 thread
TEMRO CAB AND
CARGO HEATER
TEMRO WEATHERPROOF
RECEPTACLES
• Model 100 - 12 V, 17,500 BTU shown
• Additional configurations available
• Cold weather field wired receptacle
• 120 V, 15 A with 4-holed, chrome
plated, square mounting flange
PHILLIPS & TEMRO INDUSTRIEES
116
DONALDSON Code: 780
Website: www.donaldson.com
TRUCK MUFFLERS
FOR EVERY BUDGET – DONALDSON IS THE MARKET LEADER IN HEAVY-DUTY MUFFLERS FOR BOTH ON AND OFF-ROAD VEHICLES
HARD PARTS
GOOD
• The M100465 is the most common, most popular service muffler in the industry
• Low back pressure provides good fuel economy and efficient engine performance
BETTER
• The M100580 meets all OEM back pressure, strength and life requirements
• Quieter than the M100465
BEST
• 1 million mile warranty on M101158 – stainless steel Silent Partner™
• 500,000 mile warranty on M101181 – aluminized steel Silent Partner™
• Superior acoustic performance – specifically addresses engine brake noise
by silencing engine brake “bark”
GOOD
BETTER
BEST
CLAMPS
FLEX & STRAIGHT TUBING
U-BOLT CLAMP: DOUBLE FLAT BAND
• Available in both zinc and chrome
• Fits O.D. pipe 3” (76 mm) to 6” (152 mm)
• All models 3/8-16” UNC-2A
FLEX TUBING - 10 FT LENGTH
• Available in both stainless and galvanized steel, in 10’ (3 m) or 25’ (7.6 m) lengths
• Sized by flex I.D. 2” (51 mm) to 6” (152 mm)
P226146
4" I.D. (102 mm) Stainless
P206602
4" O.D. (102 mm) Zinc
P226147
5" I.D. (127 mm) Stainless
P206603
5" O.D. (127 mm) Zinc
P226153
6" I.D. (152 mm) Stainless
P207596
6" O.D. (152 mm) Zinc
STEPPED SEALCLAMP
SealClamp™ Band Clamps– seal muffler inlets, outlets, elbow joints,
flex pipes and other system connections
• Stepped preformed models work on any overlapping I.D. to O.D.
joint and fit O.D. pipe 2.50” (64 mm) to 6” (152 mm)
• Flat band models fit O.D. pipe 2” (51 mm) to 6” (152 mm)
• Available in both stainless and aluminized steel
• Minimizes noise and exhaust gas leaks
• Easy to install, no welding or system disconnection needed
PART NO. DESCRIPTION
INTAKE STRAIGHT TUBING
• Available in stainless and aluminized steel
• 10’ (3 m) lengths fit O.D. pipes 2” (51 mm) to 6” (152 mm)
PART NO. DESCRIPTION
P207367
4" I.D. (102 mm) Aluminum
P206849
5" I.D. (127 mm) Aluminum
P206850
6" I.D. (152 mm) Aluminum
EXHAUST STRAIGHT TUBING
• Available in stainless and aluminized steel
• 10’ (3 m) lengths fit O.D. pipes 2” (51 mm) to 6” (152 mm)
X007784
4" O.D. (102 mm) Stainless
X007785
5" O.D. (127 mm) Stainless
PART NO. DESCRIPTION
X009076
6" O.D. (152 mm) Stainless
P206336
4" I.D. (102 mm) Aluminum
P206337
5" I.D. (127 mm) Aluminum
P206338
6" I.D. (152 mm) Aluminum
STACK CAPS
Designed to be used on vertically mounted
mufflers or stack pipes, protects against water
and debris. Available in zinc plated and chrome.
DONALDSON
117
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
STANDARD CUT TO LENGTH FLEX TUBING
• Also available: Cut Lengths with Finished Ends, Long-Life Cut-to-Length
• Available in stainless and galvanized steel
• 12”, 18”, 24”, 30” and 36” lengths
• Sized by flex I.D. 3” (76 mm) to 6” (152 mm)
• Deburred ends
P270539
4" (102 mm) Zinc Plated
P270540
4.5" (114 mm) Zinc Plated
P270541
5" (127 mm) Zinc Plated
PART NO. DESCRIPTION
P206342
5.5" (140 mm) Zinc Plated
J240006
4" I.D. (102 mm) 12" Length Stainless
P206343
6" (152 mm) Zinc Plated
J240007
5" I.D. (127 mm) 12" Length Stainless
P206556
6" I.D. (152 mm) 18" Length Stainless
DONALDSON Code: 780
Website: www.donaldson.com
EXHAUST SYSTEM ELBOWS:
45°, 60° AND 90°
Shorter length tubes used for connecting two other
exhaust pipes of different or the same diameters.
PART NO. DESCRIPTION
P207353
4" (102 mm) Aluminized 6"A x 6"B x 5"R
P207354
5" (127 mm) Aluminized 6"A x 6"B x 5"R
P207355
6" (152 mm) Aluminized 6"A x 6"B x 5"R
60° OD-OD
• Provides directional changes to flow in exhaust system
• Aluminized or chrome plated steel
• Varying O.D.-I.D. and O.D.-O.D. diameters of 2"
(51 mm) to 6" (152 mm), depending on angle
• Varying leg lengths and center line radius
STACK OR TAIL PIPES
Curved, straight, long 90° or dump
truck stacks – Donaldson has what
you need and in a choice of materials
including bright stainless, chrome
and aluminized.
PART NO. DESCRIPTION
J009644
4" (102 mm) Aluminized 8"A & B x 5"R
J009645
5" (127 mm) Aluminized 8"A & B x 5.5"R
HARD PARTS
REDUCERS,
CONNECTORS
AND EXPANDERS
45° OD-OD
• Provides directional changes to flow in exhaust system
• Aluminized or chrome plated steel
• Varying O.D.-I.D. and O.D.-O.D. diameters of 2"
(51 mm) to 6" (152 mm), depending on angle
• Varying leg lengths and center line radius
90° OD-OD
• Provides directional changes to flow in exhaust system
• Aluminized or chrome plated steel
• Varying O.D.-I.D. and O.D.-O.D. diameters of 2"
(51 mm) to 6" (152 mm), depending on angle
• Varying leg lengths and center line radius
PART NO. DESCRIPTION
P207330
4" (102 mm) Aluminized 9"A x 15"B x 4"R
P207332
5" (127 mm) Aluminized 11"A x 16"B x 5.5"R
P216175
6" (152 mm) Aluminized 23"A x 23"B x 10"R
MUFFLER BODY
D
BAND CLAMPS
Available for traditional mufflers with
high temperature black finish and
heavy-duty mufflers in either zincplated or aluminized mild steel.
HANGERS
MUFFLER HANGERS
• Secures the muffler horizontally or vertically
EXHAUST CLAMPS
Exhaust systems use a variety
of exhaust clamps. Selecting
the proper clamp for the job is
critical to a strong, reliable joint
connection. Donaldson offers
u-bolt, band clamp, bent bolt clamp
and v-band clamps in a variety of
styles, sizes and materials.
PART NO. DESCRIPTION
P206515
6" (152 mm) Diameter
P206516
7" (178 mm) Diameter
P206517
8.5" (216 mm) Diameter
PIPE HANGERS
• Secures the pipe horizontally or vertically.
PART NO. DESCRIPTION
3" (76 mm) Diameter
P206524
3.5" (89 mm) Diameter
P206525
4" (102 mm) Diameter
RESONATOR
Secondary noise
reduction component
that generally provides
additional noise
reduction.
SPARK
ARRESTOR
An exhaust system add-on
used to capture sparks
emitted from internal
combustion engines
through the exhaust
system.
SPLITTER TEE
ADAPTER
WYE CONNECTOR
For joining legs of dual manifold
An adapter pipe with one outlet to form a single exhaust
inlet and two outlet tubes, system. Can provide additional
used to convert a single noise reduction over that of the
primary muffler.
exhaust system to a dual
exhaust system.
DONALDSON
P206523
118
CHAMPION Code: 290
Website: www.alwaysachampion.com
Online Catalogue: www.fme-cat.com
SMALL ENGINE SPARK PLUGS
HARD PARTS
UPGRADE FOR EASIER STARTING,
HIGHER PERFORMANCE!
• For a wide range of lawn and garden power equipment
• Chosen as original equipment by many small
engine manufacturers
POWER SPORT
SPARK PLUGS
OPTIMIZE PERFORMANCE!
Passive resistors and fine wire centre electrodes
deliver more spark energy and focused spark for sure
starts, power and faster throttle response for all types
of powered sport vehicles, including motorcycles,
all-terrain vehicles (ATVs), snowmobiles and personal
watercrafts (PWCs).
PART NO. DESCRIPTION
PART NO. DESCRIPTION
868
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, resistor, special for lawn mowers, heat range 19
861
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, non-resistor, special for lawn mowers, heat range 19
8809-1
12 mm thread size, 19 mm (3/4") reach, 11/16" (18 mm) hex size,
gasket seat, resistor, removable terminal nut, 0.030 “ core nose
projection, copper core, heat range 8
843
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, non-resistor, heat range 8
8902-1
Racing plug, 14 mm thread size, 19 mm (3/4") reach, 13/16" (20.6
mm) hex size, gasket seat, non-resistor, copper core, heat range 16
852
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, resistor, projected tip, heat range 6
8339-1
Racing plug, 14 mm thread size, 19 mm (3/4") reach, 13/16" (20.6
mm) hex size, gasket seat, non-resistor, projected tip, copper core,
heat range 78
810
12 mm thread size, 19 mm (3/4") reach, 11/16" (18 mm) hex size,
gasket seat, resistor, 0.030" projected core nose, copper core,
removable terminal nut, 0.024” (0.61 mm) gap, heat range 8
8810-1
Racing plug, 12 mm thread size, 19 mm (3/4") reach, 11/16"
(18 mm) hex size, gasket seat, resistor, 0.030” core nose
projection,copper core, heat range 76
123
14 mm thread size, 19 mm (3/4") reach, 13/16" (20.6 mm) hex size,
gasket seat, resistor, copper core, heat range 5
848
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, non-resistor, projected tip, heat range 8
841
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, non-resistor, copper core, heat range 8
EZ START™
SPARK PLUGS
THE ONE TUG PLUG™
• Starts easier in all conditions!
• Booster gap with fine-wire electrode maximizes
energy flow into a concentrated spark
• Maximum anti-foul resistance
CHAMPION INDUSTRIAL
SPARK PLUGS
MAXIMUM PERFORMANCE™,
LONG SERVICE LIFE!
The technology of choice for engine manufacturers
worldwide. Delivers a consistently focused spark and
offers maximum performance regardless of engine or
ignition type.
PART NO. DESCRIPTION
5861
14 mm thread size, 9.5mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, non-resistor, heat range 19
5843
14 mm thread size, 9.5mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, resistor, heat range 8
5851
14 mm thread size, 8.25 mm (0.325") reach, 5/8" (16 mm) hex size,
tapered seat, non-resistor, cut back ground with modified gap, heat
range 6
5071
5846
PART NO. DESCRIPTION
530
RN79G; Gasket Seat; Hex Size, 13/16"; Thread Size, 14mm; Thread
Reach, 3/4"; Gap (Inch), 0.013-0.016; Gap (MM), 0.33-0.41; CE,
Nickel Copper Alloy; GE, Nickel Copper Alloy; Resistor Plug
634
RB77WPCC; Gasket Seat; Hex Size, 7/8"; Thread Size, 18mm; Thread
Reach, 13/16"; Gap (Inch), 0.01-0.013; Gap (MM), 0.25-0.33; CE,
Iridium Firing Tip; GE, Platinum Pad Surface; Resistor Plug
540
RTN79G; Gasket Seat; Hex Size, 15/16"; Thread Size, 14mm; Thread
Reach, 3/4"; Gap (Inch), 0.013-0.016; Gap (MM), 0.33-0.41; CE,
Nickel Copper Alloy; GE, Nickel Copper Alloy; Resistor Plug
519
RM77N; Gasket Seat; Hex Size, 7/8"; Thread Size, 18mm; Thread
Reach, 13.5mm; Gap (Inch), 0.01-0.013; Gap (MM), 0.25-0.33; CE,
Nickel Copper Alloy; GE, Nickel Copper Alloy; Resistor Plug
229
KB77WPCC; Gasket Seat; Hex Size, 7/8”; Thread Size, 18mm;
Thread Reach, 13/16”; Gap (Inch), 0.01-0.013; Gap (MM), 0.250.33; CE, Iridium Firing Tip; GE, Platinum Pad Surface; Resistor
Plug
535
RL15B; Gasket Seat; Hex Size, 13/16”; Thread Size, 14mm; Thread
Reach, 1/2”; Gap (Inch), 0.013-0.016; Gap (MM), 0.33-0.41; CE,
Nickel Copper Alloy; GE, Nickel Copper Alloy; Resistor Plug
641
RM77N; Gasket Seat; Hex Size, 7/8"; Thread Size, 18mm; Thread
Reach, 13.5mm; Gap (Inch), 0.01-0.013; Gap (MM), 0.25-0.33; CE,
Nickel Copper Alloy; GE, Nickel Copper Alloy; Resistor Plug
14 mm thread size, 19 mm (3/4") reach, 5/8" (16 mm) hex size,
gasket seat, copper core, projected tip, heat range 12
14 mm thread size, 9.5 mm (3/8") reach, 13/16" (20.6 mm) hex size,
gasket seat, resistor, heat range 14
MARINE SPARK PLUGS
CHAMPION
STARTS EASILY AND WON’T LEAVE
OPERATORS STRANDED!
• For all marine applications, inboards (incl. diesel
engines requiring glow plugs), outboards, jet
boats or personal watercrafts (PWC)
• Stainless steel threads never rust
• Easy to remove
• Well-suited for saltwater environments
PART NO. DESCRIPTION
828M
119
14 mm thread size, 12.7 mm (1/2”) reach, 13/16” (20.6 mm) hex
size, gasket seat, inductive resistor, cut back ground with modified
gap, marine plug, heat range 77
SKF Code: 360
Website & Online Catalogue: www.vsm.skf.com
AG BEARINGS AND SEALS
BEARINGS
PART NO. DESCRIPTION
RA100-RRB
1" Non-greasable Spherical Adapter Bearing
RA103-RRB2
1-1/4" Non-greasable Spherical Adapter Bearing
GRA100-RRB
1" Greasable Spherical Adapter Bearing
RA100-RR
1" Non-greasable Cylindrical Adapter Bearing
W209-PPB4
1-1/2" Round Bore Non-greasable Disc Harrow Bearing
GW211-PPB2
2-3/16" Round Bore Greasable Disc Harrow Bearing
DHU491-A
1-3/4" Round Flanged Disc Harrow Bearing Assembly
GW211-PPB3
1-1/2" Square Bore Greasable Disc Harrow Bearing
RAK1
1" Pillow Block Assembly
RAK1-1/4
1-1/4" Pillow Block Assembly
G1108-KRRB
1-1/2" Greasable Spherical Adapter Bearing
G1100-KRRB
1" Greasable Spherical Adapter Bearing
G1112-KRRB
1-3/4" Greasable Spherical Adapter Bearing
P204-RR6
3/4" Special AG Bearing-Mower Spindle
HARD PARTS
SKF is your source for premium AG Bearings and Seals.
GRA103RRB2 1-1/4" Greasable Spherical Adapter Bearing
SEALS
SEAL
SHAFT/ID
PART NO.
21352
2.1250
SPEEDIBORE/OD WIDTH SLEEVE
PART NO.
3.371
0.375
99212
17617
1.750
2.718
0.359
99174
12407
1.250
1.979
0.250
99125
22558
2.250
3.371
0.438
99225
17404
1.750
2.561
0.313
99174
10035
1.000
1.781
0.469
99100
16069
1.625
2.328
0.438
99162
22532
2.250
3.371
0.438
99225
12165
1.219
1.979
0.475
99123
24898
2.500
3.251
0.375
99250
22550
2.250
3.375
0.375
99225
17413
1.750
2.569
0.313
99174
SKF
120
WEATHERHEAD Code: 129
Website: www.whdcanada.com
HARD PARTS
BRASS FITTINGS
Weatherhead has been a manufacturer of fittings for over 30 years and can supply you
with all of your brass requirements! Demand the quality only Weatherhead can provide.
For a full list of products and part numbers please contact
Technical Support at 1.800.265.6434
,
CABINET
A cabinet containing 63 drawers that can be divided into two or
three sections. The bright color and attractive design make the
stock cabinet a nice addition to any store front.
• 30 1/4” wide x 25” high x 9 1/4” deep
• 61 lbs
COILED AIR BRAKE TUBING
ASSEMBLIES
•
•
•
•
•
Synflex Eclipse air brake tubing
Superior abrasion resistance
Flexible
Easy to cut
Other sizes and colours available
PART NO. DESCRIPTION
15CA12-12
15 Foot Coil Air Set with 12"Pigtail
15CA48-12
15 Foot Coil Air Set with 48"Pigtail
AIR BRAKE HOSE
•
•
•
•
•
PART NO. DESCRIPTION
FIELD ATTACHABLE AIR BRAKE
MALE CONNECTORS
•
•
•
•
•
SAE J1402 A DOT AII Approved
Synthetic EPDM inner tube and cover
Multi-fibre braid reinforcement
225 PSI working pressure
Assemblies available in many sizes, lengths and
configurations
DOT approved
Can be used for nearly any air brake line
Brass material offers excellent resistance against corrosion
Available with spring guard
Female connectors, hose menders and adapters also available
H33806
3/8” Rubber Air Brake Hose
H33808
1/2” Rubber Air Brake Hose
PART NO. DESCRIPTION
WEA
ATHERHEAD
121
PART NO. DESCRIPTION
33806B-Y24
3/8” Air Brake Hose x 1/4”
Male Connector
33806B-Y34
3/8” Air Brake Hose x 1/4"
Male Connector with Spring Guard
33806B-Y26
3/8” Air Brake Hose x 3/8”
Male Connector
33806B-Y36
3/8” Air Brake Hose x 3/8"
Male Connector with Spring Guard
33806B-Y28
3/8” Air Brake Hose x 1/2”
Male Connector
33806B-Y38
3/8” Air Brake Hose x 1/2"
Male Connector with Spring Guard
33808B-Y26
1/2” Air Brake Hose x 3/8”
Male Connector
33808B-Y36
1/2” Air Brake Hose x 3/8"
Male Connector with Spring Guard
33808B-Y28
1/2” Air Brake Hose x 1/2”
Male Connector
33808B-Y38
1/2” Air Brake Hose x 1/2"
Male Connector with Spring Guard
WEATHERHEAD Code: 129
Website: www.whdcanada.com
BRASS ASSORTMENT WITH CABINET
PART SERIES DESCRIPTION
PART SERIES DESCRIPTION
105X
Inverted Flare Tube Nuts (Steel)
3700X
131X
Inverted Flare Plugs (Steel)
3750X
Pipe Run Tees
135 & 145
Drain Cocks
41X
SAE 45 Flare Long Nuts
202X
Inverted Flare X Male NPT
48X
302X
Inverted Flare Unions
SAE 45 Flare X Male
NPT Connectors
402X
Inverted Flare X Male
NPT 90 Elbows
49X
SAE 45 Flare X Male
NPT 90 Elbows
3150X
Pipe Slotted Plugs
60X
Compression Sleeves
61X
Compression Nuts
62X
Compression Unions
68X
Compression X Male
NPT Connectors
69X
Compression X Male
NPT 90 Elbows
Pipe Tees
3151X
Pipe Square Head Plugs
3152X
Pipe Hex Head Plugs
3200X
Pipe Adapters
3220X
Pipe Bushings
3300X
Pipe Couplings
3325X – 3328X
Pipe Nipples
C-63X
Cabinet
3350X
Pipe 45 Street Elbows
CL-490
Labels
3400X
Pipe Street Elbows
HARD PARTS
Organize your brass in an attractive 63 drawer cabinet. It includes a stock of 100 fast moving brass parts to better service your customers.
You can expand or divide the clear, easy to inventory, super-sized, plastic drawers in half or thirds with the plastic dividers provided.
Illustrated, colour-coded labels provide instant identification of drawer contents.
AIR BRAKE SERVICE KIT
• Designed for shop, field use or the cab of a truck
• Double sided case with handle
PART NO. DESCRIPTION
QTY.
PART NO. DESCRIPTION
QTY.
Air Brake Tube Sleeve 5/8"
2
1469X8
Air Brake 1/2" Tube x 3/8" MPT 90
2
1460X4
Air Brake Tube Sleeve 1/4"
3
1484X10
Air Brake Insert 5/8"
3
1460X6
Air Brake Tube Sleeve 3/8"
3
1484X4
Air Brake Insert 1/4"
3
1460X8
Air Brake Tube Sleeve 1/2"
3
1484X6
Air Brake Insert 3/8"
3
1461X10
Air Brake Tube Nut 5/8"
2
1484X8
Air Brake Insert 1/2"
3
1461X4
Air Brake Tube Nut 1/4"
3
3152X4
Pipe Hex Head Plug 1/4"
3
1461X6
Air Brake Tube Nut 3/8"
3
3152X6
Pipe Hex Head Plug 3/8"
2
1461X8
Air Brake Tube Nut 1/2"
3
3152X8
Pipe Hex Head Plug 1/2"
2
1462X10
Air Brake Tube Union 5/8"
1
3220X4X2
Pipe Bushing 1/4" x 1/8"
3
1462X4
Air Brake Tube Union 1/4"
2
3220X6X4
Pipe Bushing 3/8" x 1/4"
2
1462X6
Air Brake Tube Union 3/8"
2
3220X8X6
Pipe Bushing 1/2" x 3/8"
2
1462X8
Air Brake Tube Union 1/2"
2
3300X2
Pipe Coupling 1/8"
2
1468X4
Air Brake 1/4" Tube x 1/8" MPT
2
3300X4
Pipe Coupling 1/4"
2
1468X4X4
Air Brake 1/4" Tube x 1/4" MPT
2
3300X6
Pipe Coupling 3/8"
2
1468X6
Air Brake 3/8" Tube x 1/4" MPT
2
3300X8
Pipe Coupling 1/2"
1
1468X6X6
Air Brake 3/8" Tube x 3/8" MPT
2
3325X4
Pipe Hex Nipple 1/4"
3
1468X8
Air Brake 1/2" Tube x 3/8" MPT
2
3325X6
Pipe Hex Nipple 3/8"
2
1469X4
Air Brake 1/4" Tube x 1/8" MPT 90
2
3325X8
Pipe Hex Nipple 1/2"
2
1469X4X4
Air Brake 1/4" Tube x 1/4" MPT 90
2
3400X4
Pipe Street Elbow 1/4"
2
1469X6
Air Brake 3/8" Tube x 1/4" MPT 90
2
3400X6
Pipe Street Elbow 3/8"
2
1469X6X6
Air Brake 3/8" Tube x 3/8" MPT 90
2
WEA
ATHERHEAD
1460X10
122
EMHART TEKNOLOGIES Code: 530
Website: www.emhartamericas.com
THREAD PART NO. SIZE
REPAIR KITS 5546-8
M8 x 1.25 x 12.0 mm
HARD PARTS
HELI-COIL® MASTER
THREAD REPAIR SETS
• All master sets include a drill, tap, installation tool and quantity of inserts of the most
common thread repair sizes
PART NO. PRODUCT TITLE DESCRIPTION
5621
Inch Coarse Master
For 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13
5625
Inch Fine Master
For 10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20
5626-150
Metric Coarse Master
For M5x0.8, M6x1, M8x1.25 and M10x1.25
5626-125
Metric Fine Master
For M5x0.8, M6x1, M8x1.25 and M10x1.25
SERIES
Metric, Coarse
5521-6
3/8-16 x 0.562"
Inch, Coarse
5521-5
5/16-18 x 0.469"
Inch, Coarse
5546-10
M10 x 1.5 x 15.0 mm
Metric, Coarse
5546-6
M6 x 1 x 9.0 mm
Metric, Coarse
5543-10
M10 x 1.25 x 15.0 mm
Metric, Fine
5521-4
1/4-20 x 0.375"
Inch, Coarse
5521-7
7/16-14 x 0.656"
Inch, Coarse
5528-5
5/16-24 x 0.469"
Inch, Fine
HELI-COIL BULK INSERTS
• Used for higher quantity applications
• Each size comes in three different lengths:
Short (length same
as diameter of bolt/ PART NO. SIZE
screw), Medium
1191-6CN562
3/8-24 x 0.562"
(1-1/2 X diameter
of bolt/screw),
1185-7CN438
7/16-14 x 0.438"
Long, (2 X diameter
1185-6CN562
3/8-16 x 0.562"
of bolt/screw)
• Multiple sizes
1084-10CN100 M10 x 1.5 x 10.0 mm
available
SERIES
Inch, Fine
Inch, Coarse
Inch, Coarse
Metric, Coarse
HELI-COIL PACKAGED INSERTS
SPARK PLUG AND SAV-A-THREAD® MASTER REPAIR SETS
• Sav-A-Thread is the easiest way to permanently repair stripped spark plug thread holes
• All master sets include a piloted reamer tap, (no drilling necessary), an installation tool
and quantity of inserts
PART NO. PRODUCT TITLE
DESCRIPTION
5334-14
Sav-A-Thread® Spark Plug Kit
M14 x 1.25, includes 1 short, 1 normal and
1 long insert per kit
5408-14
Sav-A-Thread® Spark Plug Kit
M1 4 x1.25, includes 6 short, 6 normal and
6 long inserts per kit
5396-14
Sav-A-Thread® HT Spark
Plug Kit
M14 x 1.25, for Ford 4.6 + 5.4 L Engines
5396-16
Sav-A-Thread® 3 Valve Head
Spark Plug Thread Kit
M16 x 1.5, for 4.6 + 5.4 L Ford Triton Engines
POP KITS
PART NO. KIT TYPE DESCRIPTION
POP Set® Kit
Manual rivet tool kit comes with rivet
tool with 200 different rivet varieties in
multiple sizes and back up plates
POP Nut® Kit
Inch
Manual threaded insert tool kit comes
with tool, mandrel and nosepieces for
8-32, 10-24, 10-32, 1/4-20
POP Nut® Kit
PNT110-M-KIT
Metric
Manual threaded insert tool kit comes
with tool, mandrel and nose pieces for
M4, M5, M6
PS15-KIT
EMHART
123
• Packaged according to thread size
• Length in
PART NO. SIZE
inches and
metric =
R1191-5
5/16-24 x 0.469"
1-1/2 X
diameter of
R1185-4
1/4-20 x 0.375"
the bolt
R1185-6
3/8-16 x 0.562"
• Multiple sizes
available
R1084-8
M8 x 1.25 x 12.0 mm
PNT110-I-KIT
SERIES
Inch, Fine, 12 pk
Inch, Coarse, 12 pk
Inch, Coarse, 12 pk
Metric, Coarse, 12 pk
POP® RIVETS
• Ideal for structural repairs, body and collision work,
modifications, parts and accessory mounting and
other in-shop applications
• Rivet Types: Open end, Closed end and T-Rivets
• Head Styles: Dome Head, Large Flange and
Countersunk
PART NO.
SIZE
59442
SD44 STL RVT 100BX
59447
SD48 STL RVT 100BX
59493
ADL68-A ALUM RVT 100BX
59490
AD66-A ALUM RVT 100BX
POP® BODY SHOP
RIVET ASSORTMENT
KIT
• Contains 265 assorted special
application rivets for the most
common repairs
STENS Code: 710
Website: www.stens.com
AIR FILTER
Replacement Briggs and Stratton
• Fits models 112200, 12A800-12T899, 92200 and
128700-129799 series
• For 3 through 5 HP horizontal, 3.5 through 6 HP
(12 CID) Quantum and 6 HP (13 CID) vertical engines
• 4 1/2” W x 5 1/4” L x 3/4” HT
• Uses Stens 100-446 or 100-442 pre-filters
Replacement Ariens, Bad Boy, Briggs and Stratton, Case,
Club Car, Exmark, E-Z-Go, Ferris, Grasshopper, Gravely,
Hustler, Jacobsen, John Deere, Kawasaki, Kohler, Kubota,
Snapper Pro, Toro, Yanmar
• Fits models 540000 and 610000 series
• 2 1/2” ID x 4 1/8” OD x 10 3/4” HT
• Uses Stens 100-780 inner filter
CARBURETOR
OIL FILTER
Replacement Honda
Honda code 5222211
• Fits model GX240; for 8 HP engines
• Not compatible with greater than 10% ethanol fuel
SOLID STATE
MODULE
AIR FILTER
Replacement Bad Boy, Bobcat, Briggs and Stratton, Case,
Grasshopper, Gravely, Husqvarna, Jacobsen
• 3/4” - 16 thread size
• 3” OD x 3-7/16” HT
• 27 micron
• 8 - 11 PSI pressure relief; anti-drain
Replacement Briggs and Stratton
• Fits models 133200, 133700, 135200 and 135700
• For 5 HP vertical and horizontal engines
OEM
REPLACEMENT BELT
Replacement MTD
• Fits 300 - 400 series, 38” decks (1990 and older)
• 5/8” W x 43” L
• Variable speed to transmission
TURF TIRE
SILVER STREAK
THE EDGE®
TRIMMER LINE
STARTER SWITCH
CST
• 16-6.50-8 tire size
• Tubeless
• 1 lb donut
• 0.095” diameter
• 275’ approximate length
Replacement AYP, Bobcat, Bunton, Craftsman,
Cub Cadet, Dixon, Grasshopper, Great Dane, Honda,
Husqvarna, John Deere, Lawn-Boy, MTD, Murray,
Noma, Poulan, Scag, Sears, Simplicity, Toro, Troy Bilt
• Magneto
• 3 positions, 5 terminals
• 5/8” mounting stem
TOOTHED BLADE
MULCHING BLADE
Replacement Ariens, Bobcat, Bunton, Encore, Exmark,
Ferris, Giant Vac, Gravely, Great Dane, Husqvarna, Jacobsen,
John Deere, Kees, Scag, Simplicity, Snapper, Toro, Wright Mfg
• 2 1/2” W x 18” L
• 5/8” center hole
• 0.203” thickness
• Requires 2 for 36” deck; 3 for 50” deck
Replacement AYP
• Fits Sears model 917.270722
• 2 1/4” W x 21” L
• 5 point star center hole
• 0.140” thickness
• Requires 2 for 42” deck
STENS
STARTER
SOLENOID
Replacement Ariens, AYP, Exmark, Grasshopper,
Gravely, Husqvarna, John Deere, Simplicity, Snapper,
Toro, Troy Bilt
• Double pole (terminal ground)
• Unique terminal post and sleeve will
accomodate both 5/16” and 1/4” terminal eyelets
HARD PARTS
STENS REPLACEMENT PARTS
Stens carries over 7,000 quality products including blades, belts, filters, saw chain and bars,
spark plugs, and internal engine parts. Stens also carries a variety of universal products such
as oil, lubricants, safety gear, trimmer line, tools, and hardware.
124
TRICO Code: 823
Website: www.tricoproducts.com
Online Catalogue: www.tricoproducts.com/Trade/OnlineCatalog
HARD PARTS
TRICO
125
61 SERIES
63 SERIES
HD - TRANSPORT WIPER BLADES
PART NO. DESCRIPTION
PART NO. DESCRIPTION
61-150
International-Navistar, Volvo
67-321
Diesel Equipment
63-151
Volvo
61-180
GMC, International-Navistar, Volvo
67-261
Chevrolet, GMC, Hino, International-Navistar, UD Trucks,
Volvo
67-241
Volvo
63-180
Ford, Freightliner, GMC, Marmon, Volvo, Western Star
61-200
AutoCar, Dodge, Ford, GMC, International-Navistar,
Kenworth, Peterbilt, Volvo
63-200
Freightliner, International-Navistar, Kenworth
64-160
AutoCar, Volvo
63-181
Ford, Kenworth, Volvo
61-151
Volvo
63-160
Ford, Freightliner, GMC, International-Navistar, Volvo
61-181
Volvo
61-130
Brockway, Kenworth, Volvo
61-161
Freightliner, Volvo
61-201
Peterbilt, Volvo
63-201
Volvo
61-160
Ford, Diamond-Reo, Freightliner, GMC, InternationalNavistar, Volvo
61-131
Volvo
TRICO Code: 823
Website: www.tricoproducts.com
Online Catalogue: www.tricoproducts.com/Trade/OnlineCatalog
HARD PARTS
64 SERIES
67 SERIES
68 SERIES
HD - OFF ROAD
WIPER BLADES
COMMERCIAL LIGHT
HD WIPER BLADES
SCHOOL BUS WIPER
BLADES
PART NO. DESCRIPTION
PART NO. DESCRIPTION
Mack
61-160
Toyota Dyna
63-180
Blue Bird, Thomas Built
63-200
Mack
61-180
Toyota Dyna
63-200
Thomas Built
63-160
Mack
61-200
Toyota Dyna
63-160
Blue Bird
61-160
Mack
68-281
Toyota Dyna
61-140
Thomas Built, Wayne Works
61-180
Mack
68-261
Toyota Dyna
61-160
Thomas Built, Ward Body Works
61-200
Mack
63-201
Toyota Dyna
61-180
Blue Bird, Thomas Built
Mack
68-241
Toyota Dyna
67-241
Blue Bird
61-200
Thomas Built, Ward Body Works
PART NO. DESCRIPTION
67-281
64-160
HD - SPECIALTY
WIPER BLADES
Refuse, Airport Refueling, Terminal Tractors
PART NO. DESCRIPTION
61-140
Oshkosh
61-160
Ottawa Truck
61-180
Crane Carrier
61-200
Oshkosh
63-201
Oshkosh
RECREATIONAL VEHICLE
WIPER BLADES
MOTOR COACH AND TRANSIT
BUS WIPER BLADES
PART NO. DESCRIPTION
PART NO. DESCRIPTION
67-284
Itasca, Monaco, Safari
67-261
Country Coach
Gulf Stream, Country Coach,
Forest River, Coachman,
Beaver Motor
61-160
Flexible
67-321
61-180
Flexible, Gillig Brothers
Damon, Four Winds, Forest
River, Fleetwood, Holiday
Rambler, Newmar
67-241
Country Coach
67-324
61-200
Flexible
68-261
Grumman Flexible
68-241
Gulf Stream
Forest River, Monaco
67-281
Air Stream
67-241
Damon
68-261
Damon, Four Winds
68-241
Four Winds, Winnebago
TRICO
67-261
126
VEYANCE Code: 500
Website: www.goodyearep.com
INDUSTRIAL HOSE PRODUCTS
HARD PARTS
INSTA-LOCK CAM
AND GROOVE COUPLINGS
Interlocking ferrules that are permanently crimped, patented
automatic locking handles snap down, preventing accidental
coupler detachment
F5 AIRLINE HOSE
• Ultra-Flexible abrasion resistant air
hose for construction, manufacturing
and other industries
• Thermoplastic construction with
temperature rating -40ºC to 70ºC,
300 psi
GORILLA AIR AND
MULTI-PURPOSE HOSE
• A premium quality, multi-purpose
industrial hose with a wide range of
application in factories, construction,
agriculture, quarries, mines, railroads,
the oil and gas industry and ship
building
HORIZON AIR
AND MULTI-PURPOSE
• An economical air and water hose,
Horizon® is for a wide range of industrial, construction and agricultural
applications
• Available in 200 and 250 psi working
pressure
VEYANCE
127
NEPTUNE 3000
CLEANING EQUIPMENT
HOSE
• For use on pressure washer machines
with working pressures up to 3,000
psi
• Temperature rating -29°C to 121°C
PART NO. DESC.
PART NO. DESCRIPTION
65179
3/8” x 50’
A300AL
3" Type A Male Adapter X Female NPT Thread
65177
1/4” x 25’
A400AL
4" Type A Male Adapter X Female NPT Thread
20465473
1/2” x 25’
C300AL
3" Type C Female Coupler X Hose Shank
20465475
1/2” x 100’
C400AL
4" Type C Female Coupler X Hose Shank
20480053
1/2” x 50’
DC300AL
3" Dust Cap
PART NO. DESCRIPTION
20129563
1/4” x 25’ coupled
20129566
3/8” x 25’ coupled
20132978
3/8” x 100’ coupled
20129582
3/4” x 50’ coupled
20132764
3/8” x 50’ coupled
PART NO. DESCRIPTION
20025750
3/8” x 500’ reels 200 psi
20025869
3/8” x 500’ reels 250 psi
20025899
1/2” x 500’ reels 250 psi
20025932
3/4” x 500’ reels 250 psi
20025966
1” x 500’ reels 200 psi
PART NO. DESCRIPTION
20023623
1/4” x 500’ reel
20023638
3/8” x 500’ reel
20023670
1/2” x 500’ reel
20023699
3/8” x 50’ coupled
20023703
3/8” x 75’ coupled
VEYANCE Code: 510
Website: www.goodyearep.com
HYDRAULIC HOSE & FITTINGS
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
Low, medium and high pressure fittings
are available for braided, spiral and
thermosplastic hose. Thread-ends SAE,
FPTF, JIC, British Standard, DIN, JIS
API and Komatsu
B2-JCFX-0808
Female Swivel
B2-JCFX-1212
Female swivel
B2-JCFX-0606
Female swivel
B2-JCFX-0810
Female swivel
B2-NPM-0808
National pipe male
B2-JCFX-0608
Female swivel
B2-NPM-0606
National pipe male
B2-NPM-0608
National pipe male
B2-JCFX-0404
Female swivel
B2-NPM-0404
National pipe male
HARD PARTS
HYDRAULIC FITTINGS
GR2SN HYDRAULIC HOSE
GCP3 HYDRAULIC HOSE
GR12 HYDRAULIC HOSE
• High pressure hydraulic oil lines used in
construction, machine tool and agricultural
applications using petroleum or water-based
hydraulic fluids
• High pressure hydraulic applications designed
to replace 100R1 where higher pressures and
a more flexible hose is required
• Use for very high pressure applications subject to
surges or flexing such as construction equipment,
mining and the high performance industrial market
PART NO.
DESC.
PART NO.
DESC.
PART NO.
DESC.
GR2SN-04X250RL
1/4” x 250’ reel
GCP3-04X50BX
1/4” x 50’ box
GR12-08X50BX
1/2” x 50’ box
GR2SN-06X250RL
3/8” x 250’ reel
GCP3-04X250RL
1/4” x 250’ reel
GR12-12X50BX
3/4” x 50’ box
GR2SN-08X250RL
1/2” x 250’ reel
GCP3-06X50BX
3/8” x 50’ box
GR12-16X50BX
1” x 50’ box
GR2SN-12X250RL
3/4” x 250’ reel
GCP3-06X250RL
3/8” x 250’ reel
GR12-08X200BX
1/2” x 200’ box
GR2SN-16X250RL
1” x 250’ reel
GCP3-08X250RL
1/2” x 250 reel
GR12-12X200CL
3/4” x 200’ coil
HYDRAULIC EQUIPMENT
PERMA CRIMPER
STATIONARY CRIMPER PCTB SERIES TEST BENCHES HOSE SAW
• Crimp capability of 1/4” through
1 1/4” ID, 2 wire braid hose and
1” ID 4-spiral hose
• Crimp capability of 1/4” through
1 1/2” ID, 2 wire braid hose and
4-spiral hose
• Goodyear Engineered Products PCTB Series
Test Benches provide a safe and efficient
method to test hose assemblies for burst or
proof testing. Test pressure range to 21,500 PSI
(1500 bar)
• Designed to cut 1 and 2 braid
hydraulic hose up to 1-1/ 2” ID and
up to 1-1/ 4” 4-spiral hose
VEYANCE
128
VEYANCE Code: 500
Website: www.goodyearep.com
POWER TRANSMISSION PRODUCTS
HARD PARTS
INSTA-POWER WITH FLEXTEN
• Dual branded, high-performance, Flexten® reinforced classical V-belts for both lawn and garden and heavy
duty industrial applications
• Cushion section compound is fiber loaded to handle high stress
• Tension member is Flexten® for superior load carrying capacity
• Engineered to handle sudden shock loads, high ambient temperatures and resist damage from oil and dust
PART NO. DESCRIPTION
HY T PLUS
• Traditional classical belts designed for operating
at higher speeds over small diameter pulleys and
short center distances
• Also for use in multiple V-belt drives where high
shock load and heavy duty loads are encountered
TORQUE FLEX
• Premium classical profile belt delivering increased
HP over traditional classical belts
• Designed for tough, small sheave diameter, high
tension drives
HY T WEDGE
• A narrow cross section V-belt that distributes
stresses more uniformly over tension members
to deliver more consistent and reliable power
transmission
VEYANCE
129
84350
Insta-Power V Belt 35"
84380
Insta-Power V Belt 38"
84400
Insta-Power V Belt 40"
84410
Insta-Power V Belt 41"
PART NO. DESCRIPTION
B42
HY T Plus 42"
B48
HY T Plus 48"
B51
HY T Plus 51"
B52
HY T Plus 52"
B54
HY T Plus 54"
PART NO. DESCRIPTION
AX21
Torque Flex 21"
AX36
Torque Flex 36"
AX39
Torque Flex 39"
AX40
Torque Flex 40"
AX48
Torque Flex 48"
PART NO. DESCRIPTION
3VX375
HY T Wedge 37.5"
3VX425
HY T Wedge 42.5"
3VX475
HY T Wedge 47.5"
3VX600
HY T Wedge 60"
3VX670
HY T Wedge 67"
GATES CANADA INC.
Code: 512, 825, 806
TRIDON IDEAL
HD HOSE CLAMPS
Code: 512
Website: www.plews-edelmann.com
Code: 825
Website: www.idealclamps.com
HARD PARTS
ULTRA LUBE /
LUBRIMATIC
ECO-SAFE AND NON
TOXIC GREASE AND
LUBRICANTS
• Ultra Lube products instantly
penetrate into areas where
lubrication is needed most,
creating a long-lasting bond to
metal and plastic surfaces
• Ideal for environmentally
sensitive areas
TRIDON IDEAL HEAVY DUTY HOSE CLAMPS
For full product details and application part #’s go to www.idealclamps.com
PART NO. DESCRIPTION
10301
*Multi purpose grease, biobased, 14 oz
DESCRIPTION
PART NO.
INCHES
MIN MAX
MIN
MAX
10320
*Red grease, biobased, LMX, red, 14 oz
Standard T-Bolts
300100138
1-3/8
1-9/16
35.1
38.6
10307
*White lithium grease, biobased, 8 oz
Standard T-Bolts
300100175
1-3/4
2
44.5
50.8
10314
Moly EP grease, biobased, 14 oz
Standard T-Bolts
300100200
2
2-5/16
50.8
58.7
10333
*Disc/drum grease, biobased, 16 oz
Standard T-Bolts
300100300
3
3-5/16
76.2
84.1
10337
5th wheel smash packs, biobased, 2 oz
Standard T-Bolts
300100400
4
4-5/16
101.6
109.5
10424
Air tool oil, biobased, 8 oz
Channel Bridge T-Bolts
300200150
1-1/2
1-5/8
38.1
41.7
10400
Gear lube, biobased, 1 qt
Channel Bridge T-Bolts
300200163
1-5/8
1-7/8
41.4
46.0
10420
Chain saw bar & chain oil, biobased, 1 qt
(avail in 1 gal bottle)
Channel Bridge T-Bolts
300200175
1-3/4
2
44.5
50.8
10557
LSO hydraulic oil, 5 gal
Channel Bridge T-Bolts
300200200
2
2-5/16
50.8
58.7
10442
Spray lubricant, 4 oz (avail in 2, 8, 12 oz, 1 qt, 1 gal)
Channel Bridge T-Bolts
300200225
2-1/4
2-9/16
57.2
65.0
Channel Bridge T-Bolts
300200250
2-1/2
2-13/16
63.5
71.4
Channel Bridge T-Bolts
300200288
2-7/8
3-3/16
73.2
81.0
Channel Bridge T-Bolts
300200425
4-1/4
4-9/16
108.0
115.8
Spring Loaded T-Bolts
300300306
3-1/16
3-3/8
77.8
85.7
.<6/=/86:99G/
Spring Loaded T-Bolts
300300356
3-9/16
3-7/8
90.5
98.4
Spring Loaded T-Bolts
300300456
4-9/16
4-7/8
115.9
123.8
PLEWS 18 V CORDLESS
GREASE GUN
Flex-Gear
45175
1
1-3/4
25.4
44.5
Flex-Gear
45200
1-1/4
2-1/8
31.8
54.0
18 volt battery operated grease gun.
STANT
MM
Code: 806
Website: www.stant.com
LOCKING
SADDLE TANK
GAS CAP
• Available in 38 models
• For cars and light trucks
• Available for 2 or more
vehicles using same key
at no extra charge
• 7 part numbers
available
• For heavy truck
applications
WEIR-STAT®
THERMOSTAT
• 7 part numbers
available
• For heavy truck
applications
GATEES CANADA
KEY ALIKE
LOCKING GAS
CAPS
130
RAW POWER ROTATING ELECTRICAL Code: 126
Website: www.rawpowerelectric.com
HARD PARTS
HEAVY DUTY
PART NO.
6356N
8078N
SPECS
OE REPLACEMENT
Starter - Delco
42MT Series
12 Volt, CW,
11-Tooth
Pinion
Caterpillar 2N2761, 8L8206, PR5347,
PR5348; Cummins 3021034; Delco
1990337, 348, 352, 354, 358, 363,
375, 376, 386, 392, 396, 398, 400,
420, 423, 424, 458, 465, 468, 470,
475, 477, 478, 483, 495; 1993803,
807, 816, 823, 975, 985; 10478810,
963; 10479037, 065, 072, 081,
110, 112, 113, 150, 185, 277; Delco
Reman. 10461038, 10461052; IHC
263819C91, 510275C91
Alternator - Delco
22SI Series
145 Amp /
12 Volt,
1-Wire
System,
14.1 Vset,
Neg. Grd.
Delco 19020302, 19020303
(
(
APPLICATION
FEATURES
Ford, Freightliner,
International, Kenworth,
Mack, Peterbilt, Sterling,
Volvo, Western Star, White
Medium and Heavy-Duty
Trucks
100% New
Armature with heat treated shaft and welded
steel-core riserless commutator
Varnish dipped field coils
Ductile iron D.E. housing
Solenoid positioned at 82 degrees
Solenoids are 100% tested for coil strength,
voltage drop across contacts and ‘reserve burnoff’
on the contacts
Painted gloss black with zinc plated hardware
100% computerized load tested
Freightliner, Kenworth,
Peterbilt, Volvo Trucks
100% New
Transpo premium rectifier and regulator
Premium, hi-temperature WBD bearing
Rotor coil leads are epoxied to prevent vibration failure
Diode trio with auto start pkg
Hi-temperature class-H windings
Precision CNC machined castings
OE performance output curve
Freightliner, Kenworth,
Mack, Peterbilt, Volvo
Trucks
100% New
Transpo premium rectifier and regulator
Premium, hi-temperature WBD 6305 bearing
Long-shaft rotor and longer needle bearing
provides more bearing surface to spread the load
for longer lasting service
1/4-20 through bolts - larger than OE 10-24 bolts
Rotor coil leads are epoxied to prevent vibration failure
Hi-temperature class-H windings
Precision CNC machined castings
OE performance output curve
Alternator - Delco
21SI Series
145 - 160
Amp /
12 Volt,
1-Wire
System,
14.1 Vset,
Neg. Grd.
8362N
Alternator - Delco
22SI Series
145 Amp /
12 Volt,
1-Wire
System,
Neg. Grd.
Delco 19020387, 388, 389, 803, 804,
889; 10459318, 320, 321
Freightliner, International,
Kenworth, Mack, Peterbilt,
Sterling, Volvo, Western
Trucks
100% New
Transpo premium rectifier and regulator
Premium, hi-temperature WBD bearing
Rotor coil leads are epoxied to prevent vibration failure
Diode trio with auto start pkg
Hi-temperature class-H windings
Precision CNC machined castings
OE performance output curve
6911N
Starter - Delco
39MT Series
12 Volt, CW,
11-Tooth
Pinion, OCP
Thermostat
Delco 8200033, 040, 083, 289;
8300009; 10461753, 753, 753, 777;
19011506, 516, 518, 519, 521
Freightliner, International,
Volvo Truck with Caterpillar
C10, C11, C12, C13, C15;
Cummin ISX Engines
100% New
IMS (Integral Magnetic Switch)
OCP (Overcrank protection)
100% New
Armature with heat treated shaft and welded steelcore riserless commutator
Varnish dipped field coils
Ductile iron D.E. housing
Solenoids are 100% tested for coil strength,
voltage drop across contacts and ‘reserve burnoff’
on the contacts
Painted gloss black with zinc plated hardware
100% computerized load tested
100% New
7685N
RAW POWER ROTATING ELEECTRICAL
131
DESCRIPTION
(
6370N
Starter - Delco
42MT Series
24 Volt, CW,
11-Tooth
Pinion
18951N
Starter - Bosch 223
Series PLGR
2.3 kW /
12 Volt,
CW, 9-Tooth
Pinion
Delco 1117917, 1117919, 1117920,
1117921, 1117922, 1117934, 1117964,
19010202
Delco 1990456, 1990485 & others;
Delco Reman. 10461024
Freightliner , International , Kenworth , Mack ,
Volvo, Western Star, White
Medium & Heavy-Duty
Trucks
Bosch 0-001-223-016; KHD 118-1751,
118-2384
KHD
RAW POWER ROTATING ELECTRICAL Code: 126
Website: www.rawpowerelectric.com
PART NO.
(
(
AGRICULTURE/INDUSTRIAL
DESCRIPTION
SPECS
OE REPLACEMENT
APPLICATION
FEATURES
7186-3N
Alternator - Delco
10SI/116 Series
72 Amp /
12 Volt,
1-Groove
Pulley
Delco 1102922, 1103035, 1103165,
1105178, 1105423
Farm & Industrial
Applications
100% New
18954N
Starter - Bosch
PMGR
2.2 kW /
12 Volt,
CW, 9-Tooth
Pinion
Bosch 6-004-AA3-014,
F-000-AL0-115; John Deere
RE508922
John Deere Loaders, Skid
Steer Loaders, Tractors
with 4024T, 5030T, 5225,
5325 Engines
100% New
16990N
Starter - Denso
OSGR
2.5 kW /
12 Volt, CW,
13-Tooth
Pinion
Case A170746; Cummins 3904466,
3920643; Denso 128000-021,
128000-054, 128000-227, 128000-248,
228000-195; Versatile 89332, 104668
Case, Ford, Versatile Loaders,
Tractors, Cummins 3.9 L,
5.9 L Diesel Engines
100% New
18566N
Starter - Denso
OSGR
4.0 kW /
12 Volt, CW,
11-Tooth
Pinion
Denso 228000-808
John Deere
100% New
Cummins, Timberjack
with Cummins 5.9 L,
8.3 L Diesel
8003N
Alternator - Delco
21SI Series
70 Amp /
24 Volt,
1-Wire
System,
Neg. Grd.
12161N
Alternator - Bosch
IR/EF
65 Amp /
12 Volt, CW
Bosch 0-120-488-205, Thermo King
44-8499
Atlas Copco, Case, Ingersoll
Rand, Thermo King
100% New
18940N
Starter - Marelli
PLGR
3.0 kW /
12 Volt, CW,
10-Tooth
Pinion
Denso 428000-129; JCB 71440231,
71440531; Marelli 63280041; Perkins
2873K405, 2873K624
JCB with Perkins Engines
100% New
8721N
Alternator - Delco
11SI Series
95 Amp /
12 Volt, CW,
8-Groove
Pulley, 03:00
Plug Clock
Case 87038475; Delco 19020208;
New Holland 87038475
Case Ag, New Holland
100% New
16608NM127
Starter - Lucas M50,
M127
2.8 kW /
12 Volt, CW,
10-Tooth
Pinion
Ford D4NN-11000-B; Lucas 26211,
26291, 26338, 26339, 26395, 27500,
27569
Case Tractors; Ford Farm
and Industrial Equipment;
Fordson, New Holland
100% New
RAW POWER ROTATING ELEECTRIC
CAL
Cummins 3675201RX, 3920617;
Delco 1117897, 1117900, 1117944,
19010108, 19010111, 19010182,
19010199; Dresser 1305787H91,
1307203H1, PB6874; Komatsu 130578-7H91
100% New
Transpo premium rectifier and regulator
premium, hi-temperature WBD 6305 bearing
Long-shaft rotor and longer needle bearing
provides more bearing surface to spread the load
for longer lasting service
1/4-20 through bolts - larger than OE 10-24 bolts
Rotor coil leads are epoxied to prevent vibration failure
Hi-temperature class-H windings
Precision CNC machined castings
OE performance output curve
HARD PARTS
(
132
RAW POWER ROTATING ELECTRICAL Code: 126
Website: www.rawpowerelectric.com
(
(
HARD PARTS
POWER SPORTS
PART
NO.
SUB CATEGORY
DESCRIPTION
SPECS OE REPLACEMENT
APPLICATION
FEATURES
18600N
Motorcycle / Scooter
Starter - Mitsuba
PMDD
12 Volt,
CW
Honda 31200-371-005, 31200463-405; Mitsuba SM-224
(1983-75) Honda GL1100 Gold Wing Motorcycles
100% New
18300CN Motorcycle / Scooter
Starter - Hitachi DD
12 Volt,
CCW,
10-Tooth
Pinion
Harley-Davidson 31570-73C
(1980-75) Harley-Davidson 1,200 cc Motorcycles
(1988-79) Harley-Davidson 1,340 cc Motorcycles
100% New
Chrome finish
18727N
Starter - Mitsuba
PMDD
12 Volt,
CW,
31-Spline
Shaft
Yamaha 42X-81800-60-00
(1985-81) Yamaha XV700, XV750, XV920
Virago Motorcycles
100% New
Includes wire
harness
12 Volt,
CW,
9-Spline
Shaft
Polaris 3084981
(2005-04) Polaris ATP 330, 500 ATV
(2002-98) Polaris Big Boss 500 UTV
(2006-95) Polaris Magnum 2X4, 4X4, 325,
330, 500 ATV
(1997-96) Polaris Magnum UTV
(2007-98) Polaris Ranger UTV
(2007-97) Polaris Scrambler 500 ATV
(2007-96) Polaris Sportsman 335, 400
100% New
Briggs and Stratton Single Cylinder 11 - 16 hp
Engines
100% New
18645N
RAW POWER ROTATING ELEECTRICAL
133
(
Motorcycle / Scooter
ATV / UTV
Starter - Mitsuba
PMDD
5746N
ATV / UTV
Starter - Briggs &
Stratton PMDD
12 Volt,
CCW,
16-Tooth
Pinion
Briggs & Stratton 393499,
394943, 399169, 490420,
494148, 494198, 494490,
494990, 497401, 499529,
691262; Generac 075255, 75255,
75255A; John Deere AM106883,
AM38136, AM39285, LG490420,
LG497401, LG691262
18331N
ATV / UTV
Starter - Mitsuba
PMGR
12 Volt,
CW,
9-Spline
Shaft
Mitsuba SM132-98; Polaris
3084403, 3085393
(2006-89) Polaris 244 cc, 283 cc, 352 cc, 378
cc 2-Stroke ATV
100% New
18420N
Personal Water Craft
Starter - Mitsuba
PMDD
12 Volt,
CW,
9-Spline
Shaft
Mitsuba S13-237; Yamaha 6M681800-10, 6M6-81800-10-00
(2005-90) Yamaha 650 cc, 701cc Personal
Watercrafts (PWC)
100% New
Personal Water Craft
Starter - Denso
PMDD
12 Volt,
CCW,
9-Tooth
Pinion
Bombardier 278-000-576, 278000-577, 278-001-038, 278-001301; Denso 228000-456
(1999-95) Sea-Doo 782cc Personal Watercrafts
(PWC) and Sport Boats
100% New
18330N-K Personal Water Craft
Starter - Mitsuba
PMDD
12 Volt,
CW
Kawasaki 21163-3702, 211633709, 21163-3712, 21163-3714
(2007-86) Kawasaki 650, 743, 781, 891, 1,071
cc Personal Watercrafts (PWC)
100% New
5768N
Starter - United
Technologies PMDD
12 Volt,
CW,
9-Tooth
Pinion
Arctic Cat 0645-184; Polaris
4170006; United Technologies
5698340MO30SM
(2007-97) Polaris 339, 488, 500, 544, 599,
679, 700, 794 cc Snowmobiles
100% New
100% New
100% New
18416N
Snowmobile
18875N
Snowmobile
Starter - Denso
PMDD
18871N
Snowmobile
Starter - Denso
PMDD
12 Volt,
CW,
8-Tooth
Pinion
Bombardier 515-175-562, 515175-843, 515-176-003; Denso
228000-984, 428000-110
(2007-06) Lynx Adventure 600 Snowmobiles
(2006-03) Lynx Ranger 600 Snowmobiles
(2007-06) Lynx Rave XT N-Duro 550, 600, 800
Snowmobiles
(2006-02) Lynx Sport Touring 500, 600, 700,
800 Snowmobiles
(2006) Lynx Yeti 600 Snowmobiles
(2006-05) Ski-Doo Expeditio
0.6 kW /
12 Volt,
CW,
9-Tooth
Pinion
Bombardier 410-212-400, Denso
128000-429
(2008-99) Lynx Snowmobiles
(2008-96) Ski-Doo Snowmobiles
RAW POWER ROTATING ELECTRICAL Code: 126
Website: www.rawpowerelectric.com
PART
NO.
6562N
(
SUB
DESCRIPTION SPECS OE REPLACEMENT
CATEGORY
Inboard /
Outboard
Marine
Starter - Delco
PG260L Series
(
APPLICATION
FEATURES
Cobra, Mercury
Mercruiser, Yamaha,
Volvo-Penta Marine
Engines
100% New
OE performance torque and output
Field case assys. are 100% tested on a
computerized gaussmeter to measure magnet
strength andposition
Zinc plated field case, solenoid, C.E. cover
and hardware
Armatures are precision balanced and feature
banded hairpins
Commutators are stake-welded and polished for
longer brush life
Starter, drive and solenoid are endurance tested
12 Volt,
CW,
11-Tooth
Pinion
Clark 923045, Daewoo A232158;
Delco 9000762, 768, 789, 819,
821, 885, -886; Hyster 1469604;
Mercury Marine 50-806964A2,
A3, A4; 50-812428A3, 50812604A2, 50-822330A2; OMC
3854751, 3855177, 3856004;
Volvo-Penta 3587625-10,
3854751-9, 3856004-1, 3860764
Mercury Marine, OMC,
Volvo-Penta
100% New
OE performance torque and output
OE interchangeable components
Field case assays are 100% tested on a
computerized gaussmeter to measure magnet
strength and position
Zinc plated field case, solenoid, C.E. cover
andhardware
Armatures are precision balanced and feature
banded hairpins
Commutators are stake-welded and polished for
longer brush life
Starter, drive and solenoid are endurance tested
Starter - Delco
PG260L Series
12 Volt,
CW,
11-Tooth
Pinion
10816N-L
Tilt and Trim
Motor
Tilt Trim Motor
12 Volt
OMC 438531
Evinrude, Johnson
Marine Outboards
100% New
10827N
Tilt and Trim
Motor
Tilt Trim Motor
12 Volt
Mercury Marine 809885A1,
A2, T2; 819479A1, 819480A1,
885654T1
Mariner, Mercury
50-125 hp Marine
Outboards with 1-Ram
Trim/Tilt System
100% New
10822MN
Tilt and Trim
Motor
Tilt Trim Motor
12 Volt
Mercury Marine 17649A1, 87828
Mercury Marine
Outboards, Mercury
Mercruiser with
Oildyne Pump
100% New
10810N
Tilt and Trim
Motor
Tilt Trim Motor
12 Volt
OMC 391264, 393259, 393988,
394176, 983019
(1992-81) Evinrude
Johnson, OMC,
Sea-Drive
100% New
10815PN
Tilt and Trim
Motor
12 Volt
Mercury Marine 99186, 99186-1,
99186T
Mariner, Mercury
35-220 hp Outboard
Motors with Design 1,
3-Ram Side Fill Integral
Trim / Tilt System
100% New
OE square design
RAW POWER ROTATING ELEECTRIC
CAL
6788N
Inboard /
Outboard
Marine
Clark 930707, 2817056;
Delco 9000820, 822, 850, 895;
12301334;Hyster 1457047,
1486530; Mercury Marine
50-812429A2; 50-806965A2, A4;
50-806963A2, A4; OMC 988217,
3850526, 3854750, 3855882,
3856003, 3858463; Volvo-Penta
3854750-1, 3856003-3; Yale
5800022-10, 5800197-25
Tilt Trim Motor
MARINE
HARD PARTS
(
134
RAW POWER ROTATING ELECTRICAL Code: 126
Website: www.rawpowerelectric.com
HARD PARTS
LAWN AND GARDEN
(
PART
NO.
SUB
DESCRIPTION SPECS OE REPLACEMENT
CATEGORY
5742N
Outdoor Power
Equipment
Starter - Briggs and
Stratton PMDD
12 Volt,
CCW,
16-Tooth
Pinion
6744N
Outdoor Power
Equipment
Starter - Delco
PMDD
5898N
Outdoor Power
Equipment
Starter - Tecumseh
OUTDOOR POWER EQUIPMENT
RAW POWER ROTATING ELEECTRICAL
135
(
(
APPLICATION
FEATURES
Briggs and Stratton 390838,
391423, 392749, 394805,
491766, 497594, 497595,
693054; John Deere AM122337,
AM37352, AM39137, LG497595
Briggs and Stratton
Single Cylinder 5, 6, 8,
10, 11 hp Engines
100% New
12 Volt,
CCW,
10-Tooth
Pinion
Delco 10455513, 10455516; John
Deere AM132702; Kohler 25098-08, 25-098-08S, 25-098-09,
25-098-09S; Kubota E7194-63010
Cub Cadet, Grasshoper,
John Deere, Kubota, Toro
Lawn Tractors, Mowers
and UTV with Kohler
16-25 hp Engines
100% New
120 Volt,
CCW,
16-Tooth
Pinion
Tecumseh 33329, A, B, C, D, E;
37000
Tecumseh HM80,
HM100 Snowblower
Engines
100% New
Includes extension cord to plug into 110 Volt
standard outlet
(
PART
NO.
SUB
DESCRIPTION SPECS OE REPLACEMENT
CATEGORY
15421N
Golf Cart
Starter / Generator
- Hitachi
12 Volt,
CW
15423N
Golf Cart
Starter / Generator
- Hitachi
15435N
Golf Cart
10711N
(
(
APPLICATION
FEATURES
Club Car 1012316, E-Z-Go 16511G1;
Hitachi GSB107-01A, GSB107-04A
Club Car, E-Z-GO Golf
Carts and Utility Vehicles
100% New
12 Volt
E-Z-GO 27065G01, Hitachi GSB107-10B
E-Z-GO 4-Cycle Golf Carts
100% New
Starter / Generator
- Mando
25 Amp
/ 12 Volt,
CCW
Club Car 1018294-01, Mando M063686,
Valeo TMC001B0011
Club Car FE290, FE350
Golf Carts
100% New
DC Motor
Motor - Salt
Spreader
12 Volt,
CCW
Johnson Electric 4854440; United Technologies
4854420M048HM, HM02223; Ref. No. W-8805
Meyers Salt Spreaders
100% New
Single ball bearing
Seals and rings to keep
out water
10735N
DC Motor
Motor - Pump
12 Volt,
CW,
9-Spline
Shaft
Fenner Stone 1175AC, 1185AC, 1785AC, 1787AC,
1931AC; Prestolite 46-4048, MUE-6114S; Waltco
70392900; Ref. No. W-9787
Dell Liftgates, Fenner
Stone, Maxon, Snowaway
Plows, Waltco
100% New
Double ball bearings
5200N
DC Motor
Motor - Snow Plows
12 Volt,
CCW
Meyer 15054; Prestolite 46-2415, MKW-4007;
United Technologies MM48826
Meyer Snow Plow
100% New
Motor - Winch
12 Volt,
Bidirectional,
0.75 Dia.
Shaft,
2.5 hp
Prestolite 46-103, 46-2099, 46-2285, 46-2287,
46-2401, 46-2426, 46-2636, 46-4157, 46-4214,
MBJ-4003, MBJ-4007, MBJ-4008, MBJ-4201,
MBJ-4202, MBJ-4209, MBJ-4402, MBJ-4405,
MBJ-4407, MBJ-4411, MBJ-4412, MBJ-4415,
MBJ-4416, MBJ-6201, MRV-B8, MUR-6202,
MUR-6202S; Ref. No. W-9143
Braden, Pierce Sales,
Ramsey, Tulsa
100% New
Bi-directional, forward and
reverse
Double ball bearings
5687N-DB DC Motor
LUBER-FINER Code: 384
Website: www.luberfiner.com
BUILT TO DO MORE
LUBE/OIL FILTERS, SPIN-ON AND ELEMENT STYLE
• Luber-finer filters are designed and
manufactured according to stringent OEM
requirements.
PCV VALVES
• PCV valves are designed to meet all
applicable NIOSH, OSHA and EPA air
sampling standards.
• Micro-glass synthetic and cellulose medias
provide high filtering efficiency and dirtholding capacity that is among the leading
nationally branded filters.
HARD PARTS
PROVEN OE-GRADE PERFORMANCE AND A FULL RANGE OF LIGHT,
MEDIUM AND HEAVY-DUTY FILTRATION SOLUTIONS FOR ALL MARKETS.
TM
BREATHERS
• All our breathers contain an effective filter
AIR FILTERS, PANEL AND RADIAL STYLE
• Luber-finer air filters remove more than
99% of airborne contaminants.
which traps oil vapor and prevents engine
compartment contamination.
• These breathers are designed for a wide
variety of applications.
• Luber-finer air filters provide 25-30% more
dirt holding capacity - even in the most
extreme operating environments.
AUTOMATIC TRANSMISSION FILTERS
• Manufactured with only the highest
CABIN AIR FILTERS
• A Luber-finer cabin air filter helps trap
bacteria, dust, pollen and exhaust gases
that come through your vehicle‘s
ventilation system.
quality components, Luber-finer
transmission filters offer
exceptional performance.
• Designed and constructed to improve
transmission performance by protecting
sensitive shift control parts.
• Cabin filters are particularly beneficial for
people with allergies.
HYDRAULIC FILTERS
• Broad range of hydraulic filters for
FUEL FILTERS
• High performance and protection keep vital
engine components such as fuel injectors
and carburetors clean and functioning well.
• The highest in quality fuel filter components
ensuring OE replacement for form,
fit and function.
virtually any light commercial and
heavy-duty application.
• Built utilizing the latest technology,
materials and manufacturing processes.
COOLANT FILTERS
commercial and heavy-duty
coolant filters.
WATER PUMPS
All new, OE quality components
Proper fit and long-life performance
• Constructed using only the highest quality
components for increased
filter integrity, extended filter life
and reduced downtime costs.
LUBERFIN
NE R
• Broad range of automotive, light
136
MECHANIX WEAR Code: 132
Website & Online Catalogue: www.mechanixwear.ca
PART NO. DESCRIPTION
MAXIMUM DURABILITY
• Material 4X® - High abrasion Material 4X® resists puncture and tearing better
than leather
• Comfortable Fit - Synthetic leather meets two-way stretch Spandex for the
ultimate in comfort and dexterity
Red - Small
MG-02-009
Red - Medium
MG-02-010
Red - Large
MG-02-011
Red - X-Large
PART NO. DESCRIPTION
MG-02-012
Red - XX-Large
MG4X-75-008
Black/Tan - Small
MG-03-008
Blue - Small
MG4X-75-009
Black/Tan - Medium
MG-03-009
Blue - Medium
MG4X-75-010
Black/Tan - Large
MG-03-010
Blue - Large
MG4X-75-011
Black/Tan - X-Large
MG-03-011
Blue - X-Large
MG4X-75-012
Black/Tan - XX-Large
MG-03-012
Blue - XX-Large
MG-05-005
Black - XXX-Small
MG-05-006
Black - XX-Small
MG-05-007
Black - X-Small
ALL PURPOSE
• Secure Fit
Flexible thermal plastic rubber
wrist closure increases flexibility
and adds protection
• Comfortable Fit
Clarino synthetic leather meets
two-way stretch spandex for the
ultimate in comfort and dexterity
MG-05-008
Black - Small
MG-05-009
Black - Medium
PART NO. DESCRIPTION
MG-05-010
Black - Large
ND-05-500
Black - Small/Medium
MG-05-011
Black - X-Large
ND-05-540
Black - Large/X-Large
MG-05-012
Black - XX-Large
MG-05-013
Black - XXX-Large
FASTFIT®GLOVE
PART NO. DESCRIPTION
SAFETY
MG-02-008
THE ORIGINAL®GLOVE
EASY ON/OFF
• Elastic Cuff
Snug-fitting cuff keeps glove in place
while offering easy on and off flexibility
• Secure Fit
Stretch panels hug fingers and thumb
crease areas providing a snug, secure fit
MECH
HAN
NIX WEAR
137
MATERIAL 4X® ORIGINAL® GLOVE
MFF-02-008
Red - Small
MFF-02-009
Red - Medium
MFF-02-010
Red - Large
MFF-02-011
Red - X-Large
MFF-02-012
Red - XX-Large
MFF-03-008
Blue - Small
MFF-03-009
KNIT NITRILE GLOVE
DIPPED NITRILE COATING
• Comfort - 13-gauge seamless liner for flexibility and breathability
• Grip - Microfinish nitrile coating adds oil resistance and exceptional dry and wet grip
M-PACT®GLOVE
IMPACT PROTECTION
• Better Control
Impact Guard™ index finger replaces
molded TPR for more dexterity when
using hand tools
• Padded Palm
High impact PORON® XRD is used to
absorb more shock and vibration than
ever before
PART NO. DESCRIPTION
MPT-51-008
Black/Yellow - Small
MPT-51-009
Black/Yellow - Medium
MPT-51-010
Black/Yellow - Large
MPT-51-011
Black/Yellow - X-Large
MPT-51-012
Black/Yellow - XX-Large
MPT-52-008
Black/Red - Small
Blue - Medium
MPT-52-009
Black/Red - Medium
MFF-03-010
Blue - Large
MPT-52-010
Black/Red - Large
MFF-03-011
Blue - X-Large
MPT-52-011
Black/Red - X-Large
MFF-03-012
Blue - XX-Large
MPT-52-012
Black/Red - XX-Large
MFF-05-008
Black - Small
MPT-58-008
Black - Small
MFF-05-009
Black - Medium
MPT-58-009
Black - Medium
MFF-05-010
Black - Large
MPT-58-010
Black - Large
MFF-05-011
Black - X-Large
MPT-58-011
Black - X-Large
MFF-05-012
Black - XX-Large
MPT-58-012
Black - XX-Large
MECHANIX WEAR Code: 132
Website & Online Catalogue: www.mechanixwear.ca
SAFETY M-PACT® ORHD GLOVE
PART NO. DESCRIPTION
Hi-Viz Yellow - Small
SHD-91-009
Hi-Viz Yellow - Medium
SHD-91-010
Hi-Viz Yellow - Large
SHD-91-011
Hi-Viz Yellow - X-Large
PART NO. DESCRIPTION
SHD-91-012
Hi-Viz Yellow - XX-Large
XMP-91-008
Hi-Viz Yellow - Small
XMP-91-009
Hi-Viz Yellow - Medium
XMP-91-010
Hi-Viz Yellow - Large
XMP-91-011
Hi-Viz Yellow - X-Large
XMP-91-012
Hi-Viz Yellow - XX-Large
XMP-95-008
Safety Black - Small
XMP-95-009
Safety Black - Medium
XMP-95-010
Safety Black - Large
XMP-95-011
Safety Black - X-Large
XMP-95-012
Safety Black - XX-Large
HI-VIZ HEAVY DUTY PROTECTION
• Extreme Knuckle Guard - Accordion design with dense EVA foam
padding reduces impact
• Max Protection - Complete impact protection from fingertip to wrist area
PART NO. DESCRIPTION
HEAVY DUTY PROTECTION
• Extreme Knuckle Guard
Accordion design with dense EVA foam
padding reduces impact
• Improved Grip
Rubberized grip panels on thumb,
fingertip and palm improve control
SAFETY SPECIALTY
• Impact Protection - TPR molded
fingertips, thumbguard and padded
knuckle provide full coverage for the top
of the hand. PORON® XRD palm pads
for cushioning
• Ergonomic Cuff - Extended, CE length
compliant neoprene cuff provides
protection, flexibility and optimal range
of motion
SHD-91-008
SAFETY M-PACT® 2 GLOVE
THE M-PACT® 2 GLOVE
M-PACT® EXP-1™ GLOVE
SP2-91-008
Hi-Viz Yellow - Small
SP2-91-009
Hi-Viz Yellow - Medium
SP2-91-010
Hi-Viz Yellow - Large
SP2-91-011
Hi-Viz Yellow - X-Large
SP2-91-012
Hi-Viz Yellow - XX-Large
PART NO. DESCRIPTION
SAFETY
OIL & GAS SAFETY
• Rugged Protection - Top of hand foam padding with integrated rubber molded
exoskeleton extended from fingertip to wrist
• Full Palm Protection - Dual layer rubberized grip and synthetic leather palm with
EVA foam heel pad for excellent anti-vibration
SAFETY FASTFIT® GLOVE
HI-VIZ EASY ON/OFF
• High-Visibility - Day-Glow two-way
stretch Spandex offers excellent visibility
in low light conditions
• Reflective - Reflective strip panel
across top of hand for added visibility
Red - Small
MP2-02-009
Red - Medium
MP2-02-010
Red - Large
MP2-02-011
Red - X-Large
MP2-02-012
Red - XX-Large
PART NO. DESCRIPTION
MP2-03-008
Blue - Small
SFF-91-008
Hi-Viz Yellow - Small
MP2-03-009
Blue - Medium
SFF-91-009
Hi-Viz Yellow - Medium
MP2-03-010
Blue - Large
SFF-91-010
Hi-Viz Yellow - Large
MP2-03-011
Blue - X-Large
SFF-91-011
Hi-Viz Yellow - X-Large
MP2-03-012
Blue - XX-Large
SFF-91-012
Hi-Viz Yellow - XX-Large
MP2-05-008
Black - Small
SFF-99-008
Hi-Viz Orange - Small
MP2-05-009
Black - Medium
SFF-99-009
Hi-Viz Orange - Medium
MP2-05-010
Black - Large
SFF-99-010
Hi-Viz Orange - Large
MP2-05-011
Black - X-Large
SFF-99-011
Hi-Viz Orange - X-Large
MP2-05-012
Black - XX-Large
SFF-99-012
Hi-Viz Orange - XX-Large
MECH
HAN
NIX WEAR
MP2-02-008
138
MECHANIX WEAR Code: 132
Website & Online Catalogue: www.mechanixwear.ca
SAFETY
THERMAL KNIT
DIPPED GLOVE
WINTER ARMOUR
GLOVE
WIND RESISTANT
GLOVE
EXCELLENT FIT AND COMFORT
• Waterproof Palm - MicroFinish®
coating provides secure grip while
keeping palm and fingers dry
• Extended Cuff - Elongated knit cuff
keeps glove secured for use under or
over jacket sleeve
COLD WEATHER PERFORMANCE
• Durable Warmth - Double stitching in
critical areas resist tearing and a Nylon
shell to protect against the elements
• Rubberized Grip - Dual layer rubber
panels on fingertips and partial palm
provide better grip
WARD OFF THE COLD
• Wind Resistant - Heavy weight
fleece top and wind resistant barrier
• Grip Palm - Rubberized high grip
water repellent palm
CUT LEVEL 5 PROTECTION
• Fabric - Our exclusive fabric meets ANSI/
CE Level 5 standards for cut
and puncture resistance
• Extra Grip - Strategically placed
silicone dots situated on top of our cut and
puncture resistant fabric provide extra grip
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
MCW-KD-500 Black - Medium/Large
MCW-WA-008 Black - Small
MCW-WR-009 Black - Medium
CFF-505-008
Black/Beige - Small
MCW-KD-540 Black - X-Large/XX-Large
MCW-WA-009 Black - Medium
MCW-WR-010
Black - Large
CFF-505-009
Black/Beige - Medium
MCW-WA-010 Black - Large
MCW-WR-011
Black - X-Large
CFF-505-010
Black/Beige - Large
MCW-WA-011 Black - X-Large
MCW-WR-012 Black - XX-Large
CFF-505-011
Black/Beige - X-Large
CFF-505-012
Black/Beige - XX-Large
MCW-WA-012 Black - XX-Large
CG4X UTILITY GLOVE
CG HEAVY DUTY GLOVE
VALUE WITHOUT COMPROMISE
• Durability
Material 4X® reinforced fingertips and thumb for added durability
• Easy Entry
Wide-opening elastic cuff makes it easy to pull on and off
GENUINE LEATHER
• 100% Leather - All leather palm and dual layer fingertips and thumb offer ultimate durability
• Knuckle Guard - Molded rubber design protects against impacts and abrasion
PART NO. DESCRIPTION
CG40-75-008 Black/Tan - Small
PART NO. DESCRIPTION
CG40-75-009 Black/Tan - Medium
CG4U-29-008 Moss - Small
CG4U-29-009 Moss - Medium
CG4U-29-010 Moss - Large
CG4U-29-012 Moss - XX-Large
CG4X PADDED PALM GLOVE
MECH
HAN
NIX WEAR
ANTI-VIBRATION
• Padded Palm
Reduces fatigue and protects against vibration and abrasion
• Light Knuckle Protection
Material 4X® padded top of knuckle for abrasion protection
CG40-75-010
Black/Tan - Large
CG40-75-011
Black/Tan - X-Large
CG40-75-012 Black/Tan - XX-Large
CG4U-29-011 Moss - X-Large
CG4X IMPACT PRO GLOVE
FOR THE TOUGHEST JOBS
• Impact Protection
Molded rubber design adds knuckle protection
• Padded Palm
Extremely durable Material 4X® palm and finger
panels for comfort and protection
PART NO. DESCRIPTION
CG4M-28-008 Rust - Small
CG4M-28-009 Rust - Medium
CG4M-28-010 Rust - Large
CG4M-28-011
Rust - X-Large
CG4M-28-012 Rust - XX-Large
PART NO. DESCRIPTION
CG4P-29-008 Moss - Small
CG4P-29-009 Moss - Medium
CG4P-29-010 Moss - Large
CG4P-29-011
Moss - X-Large
CG4P-29-012 Moss - XX-Large
139
ARMORCORE®
UTILITY GLOVE
CG4M-29-008 Moss - Small
CG4M-29-009 Moss - Medium
CG4M-29-010 Moss - Large
CG4M-29-011
Moss - X-Large
CG4M-29-012 Moss - XX-Large
MASTERLOCK Code: 233
Website & Online Catalogue: www.masterlock.com
NIGHT WATCH DUAL STAGE DEADBOLTS
SILVABOND
• Stage 1 – Standard Security: Allows access with homeowner key
• Stage 2 – Extra Nighttime Security: Locks out all keys when activated
• Antimicrobial Protected Finish
Fights the spread of germs
NIGHTWATCH
DEADBOLT LOCKS
ENTRY LOCKS
GRADE 3
Entry, ball knob and deadbolt set,
polished brass or satin nickel
Polished brass or satin nickel
Entry, ball knob,
polished brass or satin nickel
PRO SERIES RE-KEYABLE
WEATHER TOUGH
+(
SAFETY
NIGHTWATCH ENTRY
LOCK COMBO SETS
+
+(
$
+(
+
DEADBOLT LOCKS
GRADE 2
ENTRY LOCKS
GRADE 2
Deadbolt, commercial
single cylinder
Entry, ball, stainless steel
commercial cylindrical lockset
PYTHON ADJUSTABLE
LOCKING CABLE
6' (10 mm)
LAMINATED LOCK
+(
1-3/4" (44 mm)
COVERED LAMINATED LOCK,
BLUE, KEYED ALIKE (3 PK)
SOLID BRASS
PADLOCK (4 PK)
LAMINATED LOCK,
KEYED ALIKE (4 PK)
1-9/16" (40 mm)
1-9/16" (40 mm)
1-9/16" (40 mm)
Y
DESCRIPTION
MAGNUM PADLOCKS
M1BLCDHC
1-3/4", 3/4" shackle
THE MAGNUM ADVANTAGE:
• Tough-cut octagonal boron-carbide shackle
• Dual-armour laminated locks for strength
and weather resistance
• Professional grade ball bearings for superior
pull strength
• Covered key cylinder provides extreme
protection from moisture/grime
• Greater shackle clearance for improved utility
• Reinforced body bumpers for protection
M1BLCQLFHC
1-3/4", 1-1/2" shackle, 4 pack KA
M1BLCDLJHC
1-3/4", 2-1/2" shackle
M115BLCTRILFHC
1-3/4" covered, 1-1/2" shackle, 3 pack KA
M5BLCDHC
2", 1" shackle
M5BLCTHC
2", 1" shackle, 2 pack KA
M5BLCTRILFHC
2", 1-1/2" shackle, 3 pack KA
M175BLCDLFHC
2", 1-1/2" shackle, resettable combination
M515BLCDLHHC
2" covered, 2" shackle
M15BLCDLFHC
2-1/2", 1-1/2" shackle
M930BLCDLHHC
2-1/2" solid body, 2" shackle
$
$
MASTERLOCK
PART NO.
140
BRADY Code: 458
Website & Online Catalogue: www.bradycanada.ca
PART NO. DESCRIPTION
SAFETY
BPO100
15" x 17", 100/bale
Heavy weight oil only pad, dimpled and perforated
BPO500
15” x 17”, 100/bale
Light weight oil only pad, dimpled and perforated
SPC BASIC™
BRO150
30" x 150', 1/bale
Heavy weight oil only roll, dimpled and perforated every 30"
• High absorption rates,
up to 20x their weight in oil
• Low-linting finish,
dimpled and perforated
• Applications:
Production/machine areas
BPU100
15" x 17", 100/bale
Heavy weight universal pad, dimpled and perforated
BPU500
15" x 17", 100/bale
Light weight universal pad, dimpled and perforated
BRU150
30" x 150', 1/bale
Heavy weight universal roll, dimpled and perforated every 30"
BPO200
15" x 17", 100/bale
Light weight oil only pad, dimpled and perforated
SPC™ - MAXX
Convenient and cost-effective,
made with MAXX Technology.
• Ideal for outdoor applications
• Dimpled and perforated, single-ply sorbents
• Heavier and bonded to enhance strength and
reduce linting
• Applications: Spill response and clean up, off-shore or
ship-board spills, outdoor industrial applications where lint is not a concern
PART NO. DESCRIPTION
SPC100
Heavy weight, dimpled and perforated, 15" x 19", 100/bale
SPC500
Light weight, dimpled and perforated, 15" x 19", 100/bale
SPC150
Heavy weight, dimpled convenient width, 38" x 144' , 1 bale (roll)
ENV™ MAXX ENHANCED OIL SORBENTS
ENV™ Oil Sorbents are "contractor grade" oil sorbents
ideal for environmental applications.
• Efficient single-ply construction
• Equally effective on land and water
• Repels water and floats indefinitely,
even when saturated
• Ideal for marine applications where low
cost and high absorption capacity is desired
PART NO. DESCRIPTION
ENV100
Heavy weight economy, 15" x 19", 100/bale
ENV200
Light weight economy, double coverage, 15" x 19", 100/bale
ENV300
Medium weight economy, 15" x 19", 100/bale
ENV150
Medium weight, value roll, 30" x 150' , 100/bale
• Environmentally friendly sorbent that
absorbs up to 50% more than traditional
meltblown polypropylene sorbents
• Netted construction (Re-Form);
Spunbound coverstock (Re-Form Plus)
PART NO. DESCRIPTION
ABSORBENCY
RF100
Re-Form heavy weight pad, 15" x 19", 100/case
40 (151L)
RF500
Re-Form light weight pad, 15" x 19", 100/case
24 (90L)
RFP100
Re-Form Plus heavy weight pad,
Perf'd, 15" x 19", 100/case
40 (151L)
RFP500
Re-Form Plus light weight pad,
Perf'd, 15" x 19", 100/case
24 (90L)
RFP14P
Re-Form Plus heavy weight roll,
Perf'd, 14.25" x 150', 1/case
30 (113L)
RF300
Medium weight pad, 15" x 19", 100/case
32 (121 L)
GP™ MAXX ENHANCED
GP™ “General Purpose” maintenance pads and
rolls can be used to clean up virtually any liquid.
• Universal in nature, absorbs basically all fluids
• Efficient single-ply construction
• Applications: Machine shop, refineries, transportation
maintenance, steel manufacturing, and paper mills
• Made with MAXX: greater performance without the extra weight!
PART NO. DESCRIPTION
GP100
Heavy weight pad, 15” x 19”, 100/bale
MRO PLUS™
GP200
Light weight pad, 15” x 19”, 200/bale
MRO Plus™ is a universal sorbent in
all-purpose, gray maintenance sorbents.
• Absorbs all industrial liquids
• Three-ply construction makes it stronger
• Perforated to help you use only what you need
• Applications: Anywhere there is a leak, drip or spill.
Production/machine areas, maintenance areas, under
assembly lines or equipment, and liquid storage areas
GP30
Heavy weight roll, 30” x 150’, 1/bale (roll)
BRADY
PART NO. DESCRIPTION
SXT® OIL ABSORBENTS
• The ideal absorbent when durability,
abrasion resistance and low linting is required
• Made to handle petroleum based spills
• Repels water and floats indefinitely
• Spunbound Coverstock on both sides
MRO100
Heavy weight, all-purpose pad, 15" x 19", 100/case
PART NO. DESCRIPTION
MRO300
Medium weight pad, 15" x 19", 100/case
SXT100
Heavy weight pad, 15" x 19", 100/case
Jumbo heavy weight pad, 30" x 30", 50/bale
SXT200
Light weight pad, 15" x 19", 200/case
SXT30DP
Heavy weight roll, 30"x 150', 1/case
MRO50
141
RE-FORM™
PADS AND ROLLS
BRADY Code: 458
Website & Online Catalogue: www.bradycanada.ca
PART NO. DESC.
•
•
•
•
•
99552
Red
99556
Blue
99564
Green
99570
Yellow
99576
Orange
99580
Black
103033
Brown
104919
Purple
Lightweight, non conductive and non-sparking body
Fiberglass reinforced nylon body and triple-coated hardened steel shackle
Lock body dimensions: 1.75"H x 1.D"W x 0.8"D
Keyed differently
1 Padlock/pack
BRADY STEEL
PADLOCKS
3/4” SHACKLE
• Reinforced laminated steel withstands
severe physical abuse
• Hardened steel shackle resists tampering
• Body plates individually coated for superior
rust protection
• One key supplied with each padlock for
safer key management
• Body size is 1 1/3" H x 1 9/16" W x 7/8" D
PART NO. DESC.
99500
Red
STEEL GROUP LOCKOUT HASPS
99504
Blue
• Constructed of vinyl-coated high
tensile steel with rust resistant plating PART
65375
• Lock Holes: 3/8" diameter
• Standard Package: 12 hasps
65376
99508
Green
1" Diameter Jaws
99512
Yellow
1.5" Diameter Jaws
99516
Orange
99520
Black
101957
Brown
104920
Purple
NO. DESCRIPTION
55 GALLON
DRUM
ECONOMY
SPILL KIT™
Open and close
this lever locked
55 gallon drum
for fast response.
Drum meets
UN
specifications.
For medium spill
response. Absorbs up to 38 gallons per kit.
CONTENTS:
50 pads (15” x 19”),
PART NO. DESC.
4 SOCs (3” x 12”),
8 pillows (17” x 19”), SKO-55
Oil Only
goggles, nitrile gloves,
SKA-55
Allwik®
5 disposal bags,
emergency response SKH-55
Hazwik®
handbook.
The highly visible
yellow PVC bag is
“just right” for small
spills. The right price,
the right size and the
right value. Absorbs up
to 5 gallons per kit.
CONTENTS: 10 pads
(15” x 19”), 2 SOCs (3” x 4”),
goggles, nitrile gloves,
1 disposal bag, and
instruction sheet.
SOCS
• For routine spill containment and control
• Dependable, flexible tubes that contain
and absorb liquids
• Molds around corners and
conforms to uneven
surfaces
• Available in a wide
variety of types and sizes
• Everyday working tool for
all major industries
PART NO. DESCRIPTION
Slikwik® - 3" x 42", 40/case
AW412
Allwik® - 3" x 4", 12/case
AW124
Allwik® - 3" x 4", 4/case
OIL412
Oil Only - 3" x 4", 12/case
OIL124
Oil Only - 3" x 12", 4/case
ACCIDENT PREVENTION TAGS
• Size is 3" x 5.75" with 0.375" metal grommet
PART NO. DESC.
SKO-PP
Oil Only
SKA-PP
Allwik®
SKH-PP
Hazwik®
PART NO. DESCRIPTION
ENV™ SORBENT MARINE BOOMS
76168
Caution - Economy Polyester
• Specifically designed for
cleaning up oil spills on
the water. These products
have been used for nearly
30 years.
• Premium SPC™ booms are
lint free and easy to handle
• Economical ENV™ booms
feature a lint free blue sleeve
86418
Danger - Heavy Duty Laminated Polyester
PART NO. DESCRIPTION
SPC810
8" x 10', 4/bale, strong, lint-free
booms with no gaps
SPC510
5" x 10', 4/bale, strong, lint-free
booms with no gaps
ENV810
8" x 10', 4/bale, economy boom with
blue sleeves, lint free
ENV510
5" x 10', 4/bale, economy boom with
blue sleeves, lint free
PORTABLE
METAL GROUP
LOCKOUT BOX
• Made of heavy duty steel,
powder-coated for extra
rust resistance
• 13 lock holes on lid, plus
lockable clasp on front
• Dimensions: 6"H x 9"W x 3.5"D
UNIVERSAL
MULTI-POLE
BREAKER
LOCKOUT
• Single device works
with major multi-pole
breakers that employ
a tie-bar
• Made of durable
impact-modified nylon
PART NO. DESC.
66321
1/Pkg
66320
6/Pkg
BRADY
SW46
SAFETY
BRADY SAFETY PADLOCK
142
BRADY Code: 458
Website & Online Catalogue: www.bradycanada.ca
SAFETY
BMP™21
LABEL PRINTER
INDOOR/OUTDOOR
VINYL (B-595)
LOW-HALIDE POLYESTER
(B-569)
•
•
•
•
•
• Durable, low-shrink vinyl with
Brady's most aggressive adhesive
• Conforms to
irregular, curved,
rough and highly
textured surfaces
• Adheres to
"difficult" lowsurface energy
items
• Durability: 8-10 years
• For labelling stainless steel
and smooth surfaces
• Applies best to very
smooth surfaces
and ideal for
mounting to
rigid panels
• Average Outdoor
Durability:
3-5 years
• Durability: 8-10 years
Large display with backlight
Automatic label formatting
Advanced serialization, barcoding and symbols
Dual label cutter with label retention
Magnet, wrist strap and flashlight for onehanded operation
PART NO.
DESCRIPTION
BMP21
BMP21 Mobile Printer
BMP21-AC
BMP21 AC Adapter
BMP21-HC
BMP21 Hardside Carrying Case
PART NO.
BMP21-MAGNET
BMP21 Magnet
BMP21-TOOL
BMP21 Multifunctional Accessory
B30C-500-595-RD
B30C-500-595-GN
CARTRIDGES FOR BMP™21
PART NO.
DESC.
TEXT ON
WIDTH
MATERIAL COL.
LEN.
M21-375-499
3/8" B499
Black on White
9.525 mm
16'
M21-500-499
1/2" B499
Black on White
12.700 mm
16'
M21-750-499
3/4" B499
Black on White
19.050 mm
16'
M21-375-423
3/8" B423
Black on White
9.525 mm
21'
M21-500-423
1/2" B423
Black on White
12.700 mm
21'
M21-750-423
3/4" B423
Black on White
19.050 mm
21'
POLYESTER
M21-375-430
3/8" B430
Black on Clear
9.525 mm
21'
M21-500-430
1/2" B430
Black on Clear
12.700 mm
21'
M21-750-430
3/4" B430
Black on Clear
19.050 mm
21'
VINYL
M21-375-595-WT
3/8" B580
Black on White
9.525 mm
21'
M21-500-595-WT
1/2" B580
Black on White
12.700 mm
21'
M21-750-595-WT
3/4" B580
Black on White
19.050 mm
21'
M21-375-595-YL
3/8" B580
Black on Yellow
9.525 mm
21'
M21-500-595-YL
1/2" B580
Black on Yellow
12.700 mm
21'
M21-375-595-YL
3/4" B580
Black on Yellow
19.050 mm
21'
PERMASLEEVE™ WIRE MARKING SLEEVES
0.5" x 100'
B30C-1125-569-OC
B30C-1125-595-GN
B30C-1125-569-SB
B30C-1125-595-GD
1.125" x 100'
B30C-2250-569-BR
B30C-2250-595-OR
B30C-2250-569-CL
B30C-2250-595-BK
B30C-2250-595-CL
2.25" x 100'
B30C-4000-595-GD
The BBP31 Sign and Label Printer is an
easy-to-use, versatile printer that can print
signs and labels up to 4" wide. It features
a large touch screen display with drag and
drop label design and an intuitive home
screen that allows you to create labels
quickly and easily - in as little as 2 steps.
PART NO.
DESCRIPTION
BBP31
BBP31 Sign &
Label Maker
BRADY
7'
7'
M21-250-C-342
0.250" B342
Black on White
11.151 mm
7'
M21-375-C-342
0.375" B342
Black on White
16.383 mm
7’
BBP31 Printer
with Brady 360
BBP31-360P-MWL Preferred plan and
Markware™ Lean
Software
BBP31 Printer with
BBP31-ARCFLASH
Arc Flash Supply
KIT
Kit
Black on White
1"
14’
M21-1250-427
0.5" x 1.25"
Black on White
1 1/4"
14’
M21-1500-427
0.5" x 1.5"
Black on White
1 1/2"
14’
B30KIT-GENIND
4" x 100'
B30C-4000-569-GN
BBP®31
SIGN
& LABEL
PRINTER
8.509 mm
0.375" x 1"
B30C-4000-569-OR
B30C-4000-569-BK
5.969 mm
M21-1000-427
2.25" x 100'
B30C-4000-569-WT
4" x 100'
Black on White
14’
B30C-2250-569-LB
B30C-4000-569-SB
B30C-4000-595-BK
Black on White
3/4"
1.125" x 100'
B30C-2250-569-TN
B30C-2250-595-YL
B30C-4000-595-WT
0.5" x 100'
B30C-1125-569-OR
0.187" B342
Black on White
B30C-1125-569-GN
B30C-1125-595-RD
0.125" B342
0.375" x .75"
B30C-500-569-BR
B30C-500-569-PK
M21-187-C-342
M21-750-427
DESC.
B30C-500-569-LB
M21-125-C-342
SELF LAMINATING VINYL
PART NO.
B30C-500-595-CL
B30C-1125-595-BK
NYLON CLOTH
143
DESC.
B30C-500-595-GY
General Industrial
& 5S Supply Kit
BMP®51
LABEL
MAKER
The BMP51
Label Maker
has all the
latest features for portable printing on the
go: a large display screen, easy-to-use label
design apps, fast print speed, and more. You
can carry this printer throughout your facility
to quickly and easily make labels on the go.
It has a 300 dpi print head and prints at a
speed of 1 inch per second. It can print on
a variety of continuous and die-cut materials
up to 1.5" wide. With a built-in cutter, easy
top-loading cartridges, and 3 different options
for battery power, the BMP51 Label Maker is
a powerful printer for on-the-job label making.
PART NO. DESCRIPTION
75447314703
BMP51 printer with
battery pack/AC adaptor
75447314705
BMP51 with LabelMark 5
and AC adaptor
75447314707
BMP51 with AC adaptor
BRADY Code: 458
Website & Online Catalogue: www.bradycanada.ca
TDG UN PLACARDS
• TDG Placards preprinted with the UN
MATERIAL
PLACARD
SHIPPING NAME
09093
1072
Styrene
Non-Flammable Gas
Oxygen Compressed
09092
1075
Styrene
Flammable Gas
LPG
SIZE
YELLOW
BLACK/YELLOW
09092
1978
Styrene
Flammable Gas
Propane
2" x 100'
104312
104317
09095
1202
Styrene
Flammable Liquid
Fuel Oil
3" x 100'
104342
104347
09095
1263
Styrene
Flammable Liquid
Paint
4" x 100'
104372
104377
09095
1268
Styrene
Liquid Petroleum
Distillates
09082
1203
Self-Sticking
Flammable Liquid
Gasoline
HEAVY DUTY PRINT RIBBONS PART NO.
• Tough, smear-proof ribbons that produce
long-lasting printed text
• Print can withstand years in industrial areas
and outdoor conditions
DESC.
B30-R10000-MA
Magenta
B30-R10000-RD
Red
B30-R10000-OR
Orange
B30-R10000
Black
B30-R10000-YL
Yellow
TOUGHSTRIPE™ FLOOR MARKING
SAFETY
PART NO. UN
ToughStripe™ floor marking products are made with Brady’s
new B-514 polyester. ToughStripe products are ideal for
marking aisles, passageways and storage locations. Also used
for pointing out important safety equipment and egress paths.
• Service temperature range of -17ºC – -53ºC
• Resists harsh chemicals
• Exceeds safety standards for clean, dry, non-slip surfaces
SELF-LAMINATING
WIRE & CABLE
MARKERS
Features a clear, non-printable
"tail" that wraps around the wire
and serves as an overlamiante for
the printed text. Protected print
area offers a superior chemical
and abrasion resistance.
PART NO. DESCRIPTION
RAISED PROFILE LABELS ENGRAVED PLATE SUBSTITUTES (B-593)
•
•
•
•
•
High gloss, polyester label with thick raised profile and ultra-aggressive adhesive
0.70 mm thick
High performance, low cost substitute to engraved plates
10-year outdoor durability rating
Average outdoor durability: up to 10 years
PART NO.
B30EP-167-593-GN
B30EP-167-593-BK
B30EP-168-593-RD
B30EP-169-593-BK
B30EP-169-593-YL
Black on White - 16-10 Gauge - 360 lbs/roll
M-96-427
Black on White - 16-10 Gauge - 200 lbs/roll
M-31-427
Black on White - 10-4 Gauge - 200 lbs/roll
M-103-427
Black on White - 10-4 Gauge - 200 lbs/roll
M-19-427
Black on White - 12-10 Gauge - 200 lbs/roll
M-18-427
Black on White - 12-10 Gauge - 200 lbs/roll
M-21-427
Black on White - 3 Gauge -2/0 - 80 lbs/roll
M-32-427
Black on White - 10-4 Gauge - 180 lbs/roll
M-17-427
Black on White - 12-10 Gauge - 360 lbs/roll
M-115-427
Black on White - 10-4 Gauge - 200 lbs/roll
M-30-427
Black on White - 10-4 Gauge - 200 lbs/roll
M-33-427
Black on White - 3/0 - 400 kcmil - 70 lbs/roll
PERMASLEEVE® PS WIRE MAKING SLEEVES
These heat shrink sleeves are the ultimate in marker durability, performance and
aesthetic appearance. Fast shrink rate saves time and costs during installation.
DESCRIPTION
PART NO. DESCRIPTION
1.5" x 1.2", 22.5 mm diameter keyed hole (235 labels/roll)
M-187-1-342
Black on White - 20-10 Gauge
M-250-1-342
Black on White - 16-8 Gauge
M-125-1-342
Black on White - 22-16 Gauge
MC-187-342
Black on White - 22-10 Gauge
M-375-1-342
Black on White - 12-4 Gauge
MC-125-342
Black on White - 22-16 Gauge
MC-250-342
Black on White - 16-8 Gauge
MC-375-342
Black on White - 12-4 Gauge
1.9" x 1.2", 22.5 mm diameter keyed hole (180 labels/roll)
1.8" x 1.8", 30.55 mm diameter keyed hole (190 labels/roll)
B30EP-170-593-RD 2.4" x 2.4", 30.5 mm diameter (145 labels/roll)
BRADY
B30EP-168-593-GN
M-11-427
144
BRADY Code: 458
Website & Online Catalogue: www.bradycanada.ca
HEALTH AND SAFETY SIGNS
SAFETY
PART NO. DESCRIPTION
ADMITTANCE SIGNS
22218
DO NOT ENTER
22186
RESTRICTED AREA: NO UNAUTHORIZED PERSONNEL BEYOND THIS POINT
22142
NOTICE - AUTHORIZED PERSONNEL ONLY
22084
DANGER: DO NOT ENTER - EMERGENCY EXIT ONLY
95496
SECURITY NOTICE - VIDEO SURVEILLANCE IN USE ON THESE PREMISES (W/PICTO)
14" H x 20" W - BradyTuff™ Plastic
CHEMICAL AND HAZARDOUS MATERIALS
ECONOMY GRADE BARRICADE TAPE
• Made of lightweight polyethylene
• 2 ml thickness
• Ideal for temporary use outdoors
or permanent indoor warning
• Available in roll side: 3” x 1,000’
• Standard package: one roll
PART NO. DESC.
DANGER - EXPLOSIVES KEEP AWAY
25659
DANGER - EXPLOSIVES KEEP OUT
25441
DANGER - HAZARDOUS CHEMICALS
ELECTRICAL HAZARD
25533
DANGER - HIGH VOLTAGE
22104
DANGER - HIGH VOLTAGE KEEP OUT
22112
DANGER - KEEP OUT
FIRE
PLACARD
92306
Black/Yellow
CAUTION DO NOT ENTER
92353
Black/Yellow
CAUTION HIGH VOLTAGE
92354
Black/Yellow
CAUTION KEEP OUT
47039
FIRE EXTINGUISHER (IN DOWNWARD ARROW)
FIRST AID
22645
SAFETY FIRST - FIRST AID KIT
22665
EYE WASH STATION
92366
Black/Red/White
DANGER DO NOT ENTER
92369
Black/Yellow
HAZARDOUS MATERIAL
DO NOT ENTER
92303
Black/Yellow
CAUTION
25083
DANGER - NO SMOKING, NO OPEN FLAMES, NO SPARKS
22670
FIRST AID EQUIPMENT (W/PICTO) - 7" H x 10" W Plastic
NO SMOKING
92320
Black/Red
DANGER DO NOT ENTER
25120
NO SMOKING (WITH PICTO)
92327
Black/Red
DANGER
25118
NO SMOKING
PROTECTIVE WEAR SIGNS
PERMANENT
PLACARDS
Made from materials designed
to match the life of the vehicle.
All placards are 10-3/4” x 10-3/4”
to comply with TDG regulations.
Alternate placards and orange
panels are also available.
BRADY
145
25657
PART NO. DESC.
PLACARD
09024
Self Sticking
Flammable Gas Class 2
09025
Self Sticking
Non-Flammable Gas,
Non- Poisonous Gas Class 2
09028
Self Sticking
Flammable Class 3
09038
Styrene
Corrosive Class 8
09044
Self Sticking
Non-Flammable Gas Class 2
09054
Styrene
Poison
09058
Styrene
Corrosive Class 9
88546
CAUTION - EYE AND EAR PROTECTION MUST BE WORN BEYOND THIS POINT
10 "HX 14" W - Self-Sticking
41160
CAUTION - SAFETY GOGGLES REQUIRED IN THIS AREA 7" H x 10" W - Aluminum
INDOOR/OUTDOOR
GRADE FACILITY &
SAFETY LABELS
Pliable Vinyl that conforms well
to smooth or rough surfaces
such as pipes, walls, doors,
panels, shelving, bins and
equipment. Excellent resistance
to oils, detergents, dirt, grime,
and many solvents. Lasts up to
8-10 years outdoors.
PART NO.
DESCRIPTION
MC-1500-595-WT-BK
Black on White - 1.5' X 25'
MC-1000-595-WT-BK
Black on White - 1' X 25'
MC-500-595-WT-BK
Black on White - 0.5' X 25'
MC-1500-595-BL-WT
White on Blue - 1.5' X 25'
MC-1000-595-BL-WT
White on Blue - 1' X 25'
MC-1500-595-YL-BK
Black on Yellow - 1.5' X 25'
MC-1000-595-YL-BK
Black on Yellow - 1' X 25'
MC-500-595-YL-BK
Black on Yellow - 0.5' X 25'
MC-1500-595-OR-BK
Black on Orange - 1.5' X 25'
09059
Styrene
Danger
MC-1000-595-OR-BK
Black on Orange - 1' X 25'
09800
Styrene
Danger Class 9 Canada
MC-1500-595-RD-WT
White on Red - 1.5' X 25'
MUCK BOOTS Code: 532
Website: www.muckbootscanada.com
ALL PRODUCTS SHOWN ARE 100% WATERPROOF
•
•
•
•
All conditions work boot
Tall height, black
Steel toe, puncture resistant midsole
Unisex boots. Men’s size listed.
WOODY SPORT
PART NO.
SIZE
WDS-MOBU-7
7
WDS-MOBU-8
8
WDS-MOBU-9
9
WDS-MOBU-10
10
WDS-MOBU-11
11
WDS-MOBU-12
PART NO.
SIZE
PART NO.
SIZE
CHS-CSAA-7
7
CHS-CSAA-11
11
CHS-CSAA-8
8
CHS-CSAA-12
12
CHS-CSAA-9
9
CHS-CSAA-13
13
CHS-CSAA-10
10
CHS-CSAA-14
14
KIDS ARCTIC SPORT
• All terrain hunting boot
• Comfort zone of
-30ºC to 20ºC
• Tall height,
mossy oak camo
PART NO.
SIZE
ASP-200A-1
1
ASP-200A-2
2
ASP-200A-3
3
ASP-200A-4
ASP-200A-10
12
ASP-200A-11
11
WDS-MOBU-13
13
ASP-200A-12
12
WDS-MOBU-14
14
ASP-200A-13
13
•
•
•
•
Winter sport boot
Fleece lining
100% waterproof
Children’s sizes listed
SAFETY
CHORE HIGH,
CSA SAFETY BOOT
WOMEN'S ARCTIC SPORT MID
PART NO.
SIZE
WAS-404-6
6
WAS-404-7
7
WAS-404-8
8
4
WAS-404-9
9
10
WAS-404-10
10
• Extreme conditions
sport boot
• Contoured to fit a
woman's foot
• 100% waterproof
• Comfort zone of -40°C
to 10°C
Unisex boots. Men’s size listed.
EDGEWATER HIGH
PART NO.
SIZE
EWH-333T-7
7
EWH-333T-8
8
EWH-333T-9
9
EWH-333T-10
10
EWH-333T-11
11
EWH-333T-12
12
EWH-333T-13
13
EWH-333T-14
14
• All conditions field boot
• Self cleaning outsole
• Tall height, moss
Unisex boots. Men’s size listed.
ARCTIC SPORT HIGH
ARCTIC SPORT MID ALSO AVAILABLE
conditions
PART NO. SIZE • Extreme
sport boot
ASP-000A-6
6
• Comfort zone of
-40ºC to 10ºC
ASP-000A-7
7
• Tall height, black
ASP-000A-8
8
ASP-000A-9
9
ASP-000A-10
10
ASP-000A-11
11
ASP-000A-12
12
ASP-000A-13
13
ASP-000A-14
14
MUCKSTER
PART NO.
• Pet lovers shoe
SIZE • Great for all things
MST-998K-7
7
MST-998K-8
8
MST-998K-9
9
MST-998K-10
10
MST-998K-11
11
MST-998K-12
12
MST-998K-13
13
MST-998K-14
14
around the yard
• Shoe style, bark colour
Unisex boots. Men’s size listed.
Unisex boots. Men’s size listed.
CHORE HIGH
SIZE
CHH-000A-7
7
CHH-000A-8
8
PART NO.
SIZE
CHM-000A-7
7
CHM-000A-8
8
9
• All conditions work boot
• Comfort zone of
-5ºC to 20ºC
• Mid height, black
PART NO.
SIZE • All conditions work boot
JOB-000A-7
7
JOB-000A-8
8
JOB-000A-9
9
10
JOB-000A-10
10
CHH-000A-9
9
CHM-000A-9
CHH-000A-10
10
CHM-000A-10
CHH-000A-11
11
CHM-000A-11
11
JOB-000A-11
11
CHH-000A-12
12
CHM-000A-12
12
JOB-000A-12
12
CHH-000A-13
13
CHM-000A-13
13
JOB-000A-13
13
JOB-000A-14
14
CHH-000A-14
14
Unisex boots. Men’s size listed.
Unisex boots. Men’s size listed.
• Comfort zone of
-5ºC to 20ºC
• Over ankle height, black
Unisex boots. Men’s size listed.
MUC
CK BOOTS
PART NO.
JOBBER
CHORE MID
• All conditions work boot
• Comfort zone of
-5ºC to 20ºC
• Tall height, black
146
ALLIANCE MERCANTILE Code: 725
Website & Online Catalogue: www.alliancemercantile.com
VIKING JOURNEYMAN
SAFETY MESH T-SHIRT
SAFETY
Green
6005O-XL
Orange
SAFETY VEST FEATURES:
• Polyester mesh tape configuration
meets WCB requirements
• 2” Vi-brance® reflective material in 4” WCB/
Worksafe/DOT configuration
• Safety D ring slot access
• 5 point Velcro® tear away design
and four front pockets
SAFETY T-SHIRT FEATURES:
• Premium soft polyester mesh fabric
in fluorescent CSA colours
• Fully compliant with CSA Z96-09
Class 2, Level 2
• Becomes CSA Class 3 in combination
with right model arm and leg bands
• Fully compliant with ANSI/ISEA
107-2010 Class 2, Level 2
• 2” Vi-brance® reflective material in
4” WCB/Worksafe/DOT configuration
• Clip on straps on both chests for
radio phone
• Available in sizes S - 3XL
PART NO. DESCRIPTION
6005G-XL
OPEN ROAD SAFETY VEST
PART NO. DESCRIPTION
6115G
Green
6115O
Orange
One Size Fits All
SAFETY HOODIE
VIKING SOLID SAFETY VEST
PART NO. DESCRIPTION
6135G-L/XL
Green
6135O-L/XL
Orange
SAFETY VEST FEATURES:
• Safety D ring slot access
• 5 Point Velcro® tear away design
• Fully compliant with ANSI/ISEA 107-2010
Class 2 Level 2
• 2” Vi-brance® reflective material in 4” WCB/
Worksafe/DOT configuration
• Fully compliant with CSA Z96-09 Class 2,
Level 2
• Becomes CSA Class 3 in combination with
right model arm and leg bands
• Breathable solid polyester material
• Available in sizes S/M, L/XL, 2XL/3XL and
4XL/5XL
PART NO. DESCRIPTION
6420JG-XL
Green
6420JO-XL
Orange
Available in sizes S - 4XL
SAFETY HOODIE FEATURES:
• Fully compliant with CSA Z96-09 Class
2, Level 2. Becomes CSA Class 3 when
worn with Viking Ankle Bands
• Fully compliant with ANSI/ISEA 107-2010
Class 3, Level 2
• 2” Vi-brance® reflective material in 4”
WCB/Worksafe/DOT configuration
• Warm 260 gm/m polyester quick dry
• Chest cell phone pocket and clip on
radio phone straps
• Warm full size drawstring hood
• Tear away detachable hood
• Taffeta lined sleeves
• Two large pockets
JOURNEYMAN 3-IN-1 SAFETY JACKET AND PANT
ALLLIANCE MER
RCANTILE
147
JACKET & PANT FEATURES:
• Fully compliant with CSA Z96-09 Class 2, Level
2, becomes CSA Class 3 when worn as a suit
• Fully compliant with ANSI/ISEA 107-2010 Class
3, Level 2 on the jacket; Class E, Level 2 on the
bib pants
• 2” Vi-brance® reflective material in 4” WCB/
Worksafe/DOT configuration
• 3-in-1 all season safety design
• Removable bib with inside zipper pockets,
H.D. suspenders and boot zip on pants
PART NO. DESCRIPTION
• H.D. 300D polyester/PVC material and
260 gr premium polyester inner safety
jacket with detachable hood
• Resistant to abrasion, puncture, rips
and snags
• Flexible in sub-zero conditions
• Pit zips provide breathability
• Two front pockets and chest cell pocket
• Hood 6330HO, 6330HG - sold separately
• Includes fleece inner safety jacket with
removable hood
6400JG-XL
Jacket Green
6400JO-XL
Jacket Orange
6400PG-XL
Pant Green
6400PO-XL
Pant Orange
6330HG
Hood Green
6330HO
Hood Orange
Available in:
Orange: Jackets S - 4XL, Pants S - 3XL
Green: Jackets XS - 4XL, Pants XS - 3XL
SAFETY MAXX 150
SAFETY JACKET AND PANTS FEATURES:
• Fully compliant with CSA Z96-09 Class 2
Level 2, becomes Class 3 when worn as a
suit, and ANSI/ISEA 107-2010 Class 3, Level 2
• 100% waterproof, windproof and
machine washable
• 2” Vi-brance® reflective material in 4” WCB/
Worksafe/DOT configuration
• 150 Denier polyester/PU material light weight
and flexible even in cold condition
• Double sewn, taped and heat sealed seams
PART NO. DESCRIPTION
• Generous sizing for working
Jacket Green
6325JG-XL
comfort and ventilation
Jacket Orange
• Adjustable wrist cuffs
6325JO-XL
• Hood snaps off or stuffs
Pant Green
6325PG-XL
into collar
Pant Orange
6325PO-XL
• Multi-vented front and back
for breathability
Available in sizes S - 3XL
• ID patch/cell/radio clip on belts
• Attached bib pants with elasticized waist,
elastic suspenders and adjustable boot cuffs
ALLIANCE MERCANTILE Code: 725
Website & Online Catalogue: www.alliancemercantile.com
HI VIZ HD FR PVC RAINWEAR
• Nylon snap closure system and heavy duty
suspenders meet Electric Shock Resistance
standards
• Back vents and cotton corduroy collar PART NO. DESCRIPTION
Jacket
• Reversible bib and elastic suspenders 6310J-XL
on pants, includes detachable hood
Pant
6310P-XL
• Large zip pocket and pen holder
Available in sizes S - 4XL
behind bib
,
,
BEKINA STEPLITE X WHITE PU SAFETY BOOT
BEKINA STEPLITE X GREEN PU SAFETY BOOT
SAFETY BOOT FEATURES:
• CSA Class # 1 Steel Toe
• Thermo-insulating waterproof construction
remains flexible up to -30˚C
• Sizes 3-14
SAFETY BOOT FEATURES:
• CSA Class # 1 steel toe and plate
• Thermo-insulating waterproof construction
is light weight and remains flexible up to -30˚C
• Sizes 4-14
)
,
BEKINA THERMOLITE GREEN PU BOOT
BEKINA STEPLITE X GREEN PU BOOT
SAFETY BOOT FEATURES:
• CSA Class # 1 steel toe and plate
• Extra thick PU compound
• Thermo-insulating waterproof construction
is light weight and remains flexible to -40˚C
• Sizes 6-14
BOOT FEATURES:
• Non safety ultra light polyurethane construction
• Durable and flexible up to -30˚C
• Sizes 4-14
!
!
!$%
!
!
VIKING ARCTIC
EXTREME BOOT
VIKING ULTIMATE
CONSTRUCTION BOOT
VIKING
AMC SOCKS
VIKING TUNDRA
WINTER BOOT
SAFETY BOOT FEATURES:
• CSA Class # 1 steel toe and plate
• CSA Omega Electric Shock Resistant
• Warmth up to -70˚C
• Sizes 6-14
SAFETY BOOT FEATURES:
• CSA Class # 1 steel toe and plate
• CSA Omega Electric Shock Resistant
• CSA Class # 1/ASTM
• CE 0321 Chainsaw
Cut Protection Class 2
• Sizes 6-14
SOCK FEATURES:
• Dual layer thermal,
acrylic / cotton
construction
• Provides ventilation and
wicks away sweat
• Sizes 4/5-14/15
BOOT FEATURES:
• Non safety insulated boot
for warmth up to - 70˚C
• Handcrafted 100%
waterproof and oil
resistant rubber
• Sizes 6-14
VIKING
JOURNEYMAN
PVC BOOT
SAFETY
FR JACKET AND PANT FEATURES:
• Premium 0.45 mm PVC/Polyester/PVC material
with Flame Retardant (FR) treatment
• Fully compliant with CSA Z96-09 Class 1.
Level FR CSGB-155.1-2001 Flame resistant
• 2” reflective tape
• Resistant to motor oil, diesel, chemicals, animal
fat and fish oil
SAFETY BOOT FEATURES:
• CSA/ANSI Class # 1
steel toe and plate
• Premium PVC compound
provides tensile strength
and tear resistance
• Sizes 6-14
!
!
!
!
HARVIK
DIELECTRIC BOOT
VIKING MET
GUARD BOOT
VIKING MINER
49ER BOOT
VIKING ERICSEN
WORK BOOT
VIKING BUSHWHACKER
CHAINSAW BOOT
SAFETY BOOT FEATURES:
• CSA Omega, Electric Shock
Resistant 10 kV (wet), ASTM
F1117-03 or 37 kV (dry)
• Fuel and oil resistant sole,
30% better slip resistance
than a PVC sole
• Sizes 6-14
SAFETY BOOT FEATURES:
• CSA Z195-02/ASTM
F2413-05
• CSA Class # 1
steel toe and plate
• SNUG FIT construction with
comfortable ergonomic insole
• Sizes 6-14
SAFETY BOOT FEATURES:
• ASTM MT/75
metatarsal protection
• CSA Class # 1
steel toe and plate
• CSA Omega Electric Shock Resistant
• Sizes 5-14
SAFETY BOOT FEATURES:
• CSA Class # 1 steel toe
• Ballistic nylon cut resistance
• Heavy duty cotton canvas
lining
• CSA Omega - Electric
Shock Resistant
• Sizes 6-14
SAFETY BOOT FEATURES:
• CSA Z195-09 Green Tree
Chainsaw Protection
• CSA Class # 1 steel toe and plate
• CSA Omega Electric Shock Resistant
• CSA Class 1/ASTM
• Sizes 4-15
ALLLIANCE MER
RCANTILE
!
148
3M Code: 815
Website: www.3mcollision.com
RESPIRATORS
SAFETY
REPLACEMENT FILTER &
CARTRIDGE FOR 37078
PART NO. DESCRIPTION
07046
Organic Vapor Cartridge
07194
Particulate Filter
07054
Retainer
3M™ PROFESSIONAL
SERIES HALF FACEPIECE
PAINT SPRAY
PACKOUT
MEDIUM
3M™ N95 PARTICULATE
RESPIRATOR
• Designed to be
fully maintainable
• Designed for use in grinding,
sanding and buffing
• Features 3M`s Advanced
Electret Media (AEM) and
an adjustable nose clip to
help provide a custom fit
and secure seal
SCOTCH-BRITE™
3M™ ROLOC™ SURFACE
CONDITIONING DISCS
• Use for cleaning and finishing on all metals for
removal of light rust, oxides and coatings
PART NO. DESC.
07480
2" Course
07481
2" Medium
07485
3" Course
07486
3" Medium
GRINDING DISCS
TAPE
3M™ GREEN CORPS™
ROLOC™ DISCS
• Generally used for hard to reach areas
in paint, rust and weld removal
• Fits any standard 1/4 in drill or air tool
• Easy, quick change tool
PART NO. DESC.
01396
2" 50 Grade
01397
2" 36 Grade
01406
3" 50 Grade
01407
3" 36 Grade
SCOTCH-BRITE™
ULTRA FINE HAND PAD
SCOTCH-BRITE™
GENERAL PURPOSE HAND PAD
• 6” x 9”, grey
• For final sanding of primer-surfacer
• For light cleaning, finishing of metal,
plastic, composite and wood surfaces
• Rinses clean, will not rust and can be
used over and over again
• 6“ x 9”, maroon
• For scuffing before applying paint and primer-surfacer
• For used car reconditioning, cleaning upholstery,
headlines and door pads, chrome and white wall tires
• Rinses clean, will not rust and can be used over and
over again
SCOTCH™ SUPER 33+
VINYL ELECTRICAL TAPE
• 3/4 inch x 66 feet (19 mm x 20.1 m), black
• 7 mil premium grade all-weather vinyl
• Its aggressive adhesive and elastic backing ensure easy,
water-resistant conformation to irregular surfaces in low
temperatures, yet will not ooze or melt in high temperatures
3M TEMFLEX VINYL
ELECTRICAL TAPE
• 3/4” x 66 ft black
• 7 mil vinyl tape for general use,
protective jacketing and harnessing
• An economical solution for less demanding indoor jobs
3M AUTOMOTIVE ACRYLIC PLUS
ATTACHMENT TAPE
• Acrylic Plus Attachment Tapes
are OEM approved and are
stronger, higher performing,
high stress handling products
than other automotive
attachment tapes
• Typical applications include
body side moldings, rocker panel moldings, claddings,
wheel flares, bumper trim and other exterior and interior
automotive trim components
PART NO. DESCRIPTION
06382
45 mil, 1/2" x 20 yd, Black
06383
45 mil, 7/8" x 20 yd, Black
06396
Adhesion Promoter
VINYL DUCT TAPE
3M
149
3M™
PLATINUM™
PLUS BODY
FILLER GALLON
A super creamy formula that achieves
extreme adhesion to galvanized steel,
aluminum, E-coat, fiberglass, SMC,
cured epoxy, urethane and primers.
• Tartan™ Duct Tape 3939, silver,
2 “ x 60 yard, 48 mm x 55 m
• Waterproof, used for demanding
duct tape applications
VINYL DUCT TAPE
• 3M™ Duct Tape 3900, black, 2” x 60 yard,
48 mm x 54.8 m
• General purpose, or general maintenance,
wrapping, sealing, protecting and color
coding
3M SCOTCH PERFORMANCE
MASKING TAPE 233+
• Has excellent
conformability, transfer and
bleed through resistant
• Better UV resistance than
traditional masking tapes
PART NO. DESCRIPTION
26334
3/4", 18 mm x 55 m, Green
26338
1-1/2", 6 mm x 55 m, Green
26340
2", 48 mm x 55 m, Green
EF WALTER Code: 678
Website: www.efwalter.com
COMFORT REPLACEMENT INSOLES
SAFETY
•
•
•
•
Fabric top cloth features Aegis Microbe Shield® technology
40 perforations for breathability and ventilation
2 mm blue open cell polyurethane foam provides extra comfort
Arch support and deep heel cup provides superior comfort,
support and cushioning
• Lightweight insole is suitable for all activities
PART NUMBER SIZE
416005007
Men’s size 9
416005008
Men’s size 10
416005009
Men’s size 11
416005010
Men’s size 12
TOUGH LACES FOR THE TOUGHEST WORK ENVIRONMENTS
• High quality laces for work footwear
• Different sizes available: 54”/137 cm,
63”/160 cm, 72”/183 cm
• Available in black, yellow/tan and white
• Featuring FUSED TIP guaranteed for life!
• Work boot laces are made in Canada
PART NUMBER DESCRIPTION
443004003
Black 54” high quality lace featuring FUSED TIP
443004004
Black 63” high quality lace featuring FUSED TIP
443004005
Black 72” high quality lace featuring FUSED TIP
443004009
Yellow/tan 54” high quality lace featuring FUSED TIP
443004010
Yellow/tan 63” high quality lace featuring FUSED TIP
443004011
Yellow/tan 72” high quality lace featuring FUSED TIP
443004015
White 45”sport high quality lace
443004016
Black 45” sport high quality lace
HEAVY DUTY
BOOT GUARD
DUBBIN
PROTECTOR
• Heavy duty water
proofing protection
for leather
• Dubbin with Silicone
• Waterproofs all types
of leather
• Prevents cracking
EFF WALTER
Heavy Duty Boot Guard provides
lasting, breathable protection that
creates an invisible silicone shield
and prevents water and stains from
settling in. Preserves and protects
boots from the elements.
• Water and stain repellant
• Protects against rain, snow,
salt and dirt
• Suitable for most types of
genuine or synthetic leather,
suede, nubuck and fabric
• Best selling SKU!
150
THE GREAT CANADIAN SOX CO. / J. B. FIELD’S
Code: 592
Website: www.greatsox.ca
30 BELOW CLASSIC ICELANDIC®
SEASONS:
• Winter -30°C
SAFETY
ACTIVITIES:
• Outdoor work, skiing, winter
sports, snowboarding
%
%
LIGHT
THERMAL
WORK FORCE®
SEASONS:
• 4 Seasons
ACTIVITIES:
• Indoor and outdoor
rugged work
FEATURES:
• Cotton, natural,
easy care fibre
TRADITIONAL
BOOTSOCK
WORK FORCE®
SEASONS:
• 4 Seasons
ACTIVITIES:
• Indoor and outdoor
rugged work
DESCRIPTION
• Material: Wool
• Colour: Red Stripe
• Package Qty: 3/pk
ICE - 50 BELOW
GUMBOOT CUFF
ICELANDIC®
SEASONS:
• Winter -50°C
PART NO. DESCRIPTION
SIZE
COLOUR
ACTIVITIES:
• Outdoor work, camping,
hunting / fishing
8030-06
Icelandic – 30 Below
Large
Black
8030-13
Icelandic – 30 Below
Large
Mid-Grey
8030-02
Icelandic – 30 Below
Large
Navy
8033-06
Icelandic – 30 Below
X-Large
Black
8033-13
Icelandic – 30 Below
X-Large
Mid-Grey
8930-06
Icelandic – 30 Below Knee High
Large
Black
8930-13
Icelandic – 30 Below Knee High
Large
Mid-Grey
FEATURES:
• Pre-shrunk new wool,
machine wash and dry
• Anti-odour inhibits
growth of odour causing
bacteria
DESCRIPTION
• Size: Large
• Colour: Beige
• Package Qty: 1
DESCRIPTION
• Size: Large
• Colour: Black
• Package Qty: 3/pk
POLYPROPYLENE
LINER
SECOND SKIN®
151
SEASONS:
• 4 Seasons
LITE WALKER
EXPEDITION®
ACTIVITIES:
• Indoor and outdoor
work, skiing, snowboarding
SEASONS:
• Fall, spring, summer
FEATURES:
• Anti-microbial
Protectguard® inhibits
growth of bacteria and
fungi
• Coolmax moisture
removal
FEATURES:
• Polypropylene
thermal insulation
• Anti-blister, reduced
abrasion
• Anti-soil Protectguard®
provides protection
against soiling
• Wick dry provides
moisture removal from
inside to outside
• Full terry provides
added insulation
DESCRIPTION
• Size: Medium
• Colour: Grey
• Package Qty: 1
DESCRIPTION
• Size: Large
• Colour: Black
• Package Qty: 1
ACTIVITIES:
• Indoor and outdoor
work, biking, walking,
running
SDLUSHUSDFN
SUPER WOOL HIKER GX EXPEDITION®
SEASONS:
• 4 Seasons
ACTIVITIES:
• Indoor and outdoor work, backpacking,
hiking, trails, trekking
FEATURES:
• Anti-odour Protectguard® inhibits
growth of odour causing bacteria
• Pre-shrunk new wool, machine
wash and dry
• X-High Cushion, warmth and protection
ICE SOCK
ICELANDIC®
SEASONS:
• Winter -50°C
ACTIVITIES:
• Outdoor work, hunting /
fishing, mountaineering,
snow shoe walking
FEATURES:
• Anti-odour Protectguard®
inhibits growth of odour
causing bacteria
• Pre-shrunk new wool,
machine wash and dry
• X-High Cushion, warmth
and protection
DESCRIPTION
• Size: Large
• Colour: Beige
• Package Qty: 1
FEATURES:
• Anti-microbial Protectguard® inhibits
growth of bacteria and fungi
• Arch support, superior fit
• Impact support zones provides protection
and comfort
• Double cuff comfort
PART NO. SIZE COLOUR
• Half cushion comfort and
protection
• Merino wool provides softness
and natural warmth
8761-26
Large
Taupe
8762-26
Medium
Taupe
SDLUSHUSDFN
VAGDEN DIABETIC
CASUAL COTTON
NON-ELASTIC SOCKS
SEASONS:
• 4 seasons
ACTIVITIES:
• Indoor and outdoor work
FEATURES:
• 90% cotton, 5% nylon, 5% spandex
• Anti-microbial treatment keeps feet
smelling fresh
• Fits shoe sizes 8-12
• Casual weight and non-elastic comfort
for superior comfort
PART NO. COLOUR
5610/2-06
Black
5610/2-26
Taupe
5610/2-02
Navy
SDLUSHUSDFN
GROUPE BBH INC. Code: 140
Website: www.groupebbh.com
NITRILE
DISPOSABLE
NITRILE
DISPOSABLE BLACK
PART NO. DESCRIPTION
7924556S
5 ml, Small, powder free, 100 per box
7924556M
5 ml, Medium, powder free, 100 per box
7924556L
5 ml, Large, powder free, 100 box
7924556XL
5 ml, X-Large, powder free, 100 per box
NITRILE FOAM
•
•
•
•
•
•
Black Nitrile foam on black nylon liner
Ideal for working in wet or dry conditions
Unchallenged dexterity
Sanitized to reduce sweat and odour
Anti-slip grip
Ideal for assembly, repair, tire
changes, material handling
PART NO. DESCRIPTION
792455S
4 ml, Small, powder free, 100/box
792455M
4 ml, Medium, powder free, 100/box
NITRILE WORK
GLOVE
792455L
4 ml, Large powder free, 100/box
• Nitrile fully dipped
• Pasted cuff
• Ideal for working with
oils and petroleum
792455XL
4 ml, X-Large, powder free, 100/box
792455PS
4 ml, Small, lightly powdered, 100/box
792455PM
4 ml, Medium, lightly powdered, 100/box
792455PL
4 ml, Large, lightly powdered, 100/box
792455PXL
4 ml, X-Large, lightly powdered, 100/box
PART NO. DESCRIPTION
751180C8
Medium
751180C9
Large
751180C10
X-Large
LATEX DIPPED
•
•
•
•
•
Black latex dipped palm, HIVIS poly knit back
Excellent dexterity
Abrasion and puncture resistance
Anti-slip grip
Ideal for working with tools, general
construction, material handling
• Also available in winter version
PART NO. DESCRIPTION
B58124HS
Small
B58124HL
Large
750762L
Winter lined, Large
750762XL
Winter lined, X-Large
LINED WELDING GLOVE
COWHIDE
WORK GLOVE
• Economy cowhide work glove
• Patch palm
• Palm lined
PART NO. DESCRIPTION
021600PLPP
Large
021600PPXL
X-Large
• Hand lined for comfort and added
heat protection
• Stiff cuff for added puncture resistance
• Oil and water resistant palm
• Durable leather palm
• Ideal for welding, working with
sharp objects, general construction
PART NO. DESCRIPTION
060394
Large, fully hand lined
060394XL
X-Large, fully hand lined
DICKIES
WORK GLOVES
• Synthetic leather
• Rubber padding on back
• Velcro
PART NO. DESCRIPTION
POLY ROPE
78700DIL/XL
Large/X-Large
• Yellow 3 strand polypropylene rope, cardboard reel
• Widely used in a multitude of applications such as,
construction, commercial, DIY, sporting, tie-downs
• Also available in pre-packed sizes for retail
78700DIS/M
Small/Medium
PART NO. DESCRIPTION
SAFETY
• 4 ml blue Nitrile disposable gloves
• Ideal for oil changes, working with greases,
general automotive maintenance
• Available powder free and powdered
TYING TWINE
3/16” x 2,125’
A1PJ/014
1/4” x 1,300’
PART NO. DESCRIPTION
A1PJ/516
5/16” x 975’
A1M/140BB
9,000’, breaking strength up to 140 lb
A1PJ/038
3/8” x 630’
A1M/180BB
7,000’, breaking strength up to 180 lb
A1PJ/012
1/2” x 335’
A1M240BB
5,250’, breaking strength up to 240 lb
A1PJ/058
5/8” x 200’
A1M/500BB
2,720’, breaking strength up to 500 lb
A1PJ/034
3/4” x 125’
A1M/800BB
1,450’, breaking strength up to 800 lb
GRO
OUPE BBH
• Blue and white polypropylene tying twine
• Mainly used for tie down applications
A1PJ/316
152
230
HONEYWELL SAFETY PRODUCTS Code:
Code: 399
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
EYE PROTECTION
SAFETY
Universal comfort bridge, 4A coating, anti-fog,
anti-scratch, anti-static and anti-UV at 99.9%
• CSA approved
PART NO. DESCRIPTION
Blue Frame, Clear Lens
Black/Gray Frame, Smoke Lens
T56555BS
6:8128
LIGHTNING™ T6500 SERIES
SAFETY GLASSES
State of the art stylish protection, provided with
2 Flexi-Fit soft nose pieces and 4A protection
• CSA approved
PART NO. DESCRIPTION
T65005
Black Frame, Clear Lens
T65005S
Black Frame, Smoke Lens
S6900
Clear,
Ultra-dura
Anti-scratch
S6900X
Clear,
Uvextreme
Anti-fog
A700 SERIES
SAFETY EYEWEAR
S6901
Espresso,
Ultra-dura
Anti-scratch
S6901X
Espresso,
Uvextreme
Anti-fog
S6902
Amber,
Ultra-dura
Anti-scratch
S6902X
Amber,
Uvextreme
Anti-fog
S6903
Gold Mirror,
Ultra-dura
Anti-scratch
S6904
SCT-Reflect
50, Ultradura Antiscratch
$
A400 SERIES
SAFETY EYEWEAR
Sporty, wrap-around, one piece lens.
Scratch Resistant Hardcoat
• Certified to CSA Z94.3 standards
A400
Clear/Clear, Anti-scratch
Sport temples with soft temple tip pads
for comfort. Polycarbonate, distortion free,
scratch resistant, wrap around lenses
• Certified to CSA Z94.3 standards
A401
Gray/Gray, Anti-scratch
PART NO. DESCRIPTION
A402
Amber/Amber, Anti-scratch
A700
Clear/Clear, Anti-scratch
A701
Gray/TSR Gray, Anti-scratch
A403
Gray/Silver Mirror,
Anti-scratch
A702
Amber/Amber, Anti-scratch
A404
Clear/I/O Silver Mirror,
Anti-scratch
A703
Gray/Blue Mirror,
Anti-scratch
A400AF
Clear/Clear Fog-Ban, Anti-fog
A704
Gray/I/O Silver, Anti-scratch
A401AF
Gray/Gray, Fog-Ban, Anti-fog
A705
Clear/Clear, Fog-Ban,
Anti-fog
6:8128
6:8128
6:8128
PART NO. DESC.
PART NO. DESCRIPTION
N-VISION ™ T5650 SERIES
SAFETY GLASSES
T56555BL
GENESIS®
REPLACEMENT
LENS
6:8128
HONEYWELLL SAFETY
Y PR
RODUCTS
A200 SERIES
SAFETY
EYEWEAR
6:8128
A900 SERIES SAFETY
EYEWEAR
Sporty, 8-base wrap around poly-carbonate
lens. Non slip, padded temples
• Meets CSA Z94.3 standards
PART NO. DESCRIPTION
A900CSA
6:8128
VAPOR® SERIES
Contoured fit, lightweight sporty styling in
a metallic blue frame. Soft nosepiece and
includes break-away FlexiCord.
PART NO. DESCRIPTION
Lightweight unilens design offers panoramic vision. Adjustable lens
inclination and temple length for a custom fit. Designed with attractive OTG
(over-the-glass) styling
• Certified to CSA Z94.3 standards
PART NO. DESCRIPTION
S2500
Black/Clear, Ultra-dura Anti-scratch
S2500C
Black/Clear, Uvextreme Anti-fog
S2504
Black/Gray, Ultra-dura Anti-scratch
S2504C
Black/Gray, Uvextreme Anti-fog
S2508
Black/Shade 3.0 Infra-dura, Ultra-dura Anti-scratch
11150900
Metallic Blue/Clear,
Anti-scratch
11150901
Metallic Blue/TSR Gray,
Anti-scratch
11150904
Metallic Blue/Silver Mirror,
Anti-scratch
S2509
Black/Shade 5.0 Infra-dura, Ultra-dura Anti-scratch
Metallic Blue/Clear, Fog-Ban
Anti-fog
S2510
Blue/Clear, Ultra-dura Anti-scratch
11150905
S2510C
Blue/Clear, Uvextreme Anti-fog
Black/Clear Hardcoat
Black/Clear Anti-fog
UVEX ASTROPEC® OTG 3001 SERIES
Durable frame, integrated side protection.
Adjustable temple lengths.
A901CSA
153
6:8128
6:8128
HONEYWELL SAFETY PRODUCTS Code: 230
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
,
,
,
UVEX GENESIS® X2 SERIES
• Adding a new level of sports-inspired style to the Genesis series with
ratcheting temples for customized lens inclination
,
,
,
SAFETY
PART NO. DESCRIPTION
S3500
Silver & Navy/Clear, Ultra-dura Anti-scratch
S3520
Black & Yellow/Clear, Ultra-dura Anti-scratch
S3520D
Black & Yellow/Clear, Dura-streme, Dual Anti-fog/
Anti-scratch
S3521
Black & Yellow/Espresso, Ultra-dura Anti-scratch
S3522
Black & Yellow/Amber, Ultra-dura Anti-scratch
S3523
Black & Yellow/Gold Mirror, Ultra-dura Anti-scratch
S3531X
Black & Yellow/SCT-Blue Lens, Uvextreme Anti-fog
PART NO. DESCRIPTION
S3532X
Black & Yellow/Dark Gray, Uvextreme Anti-fog
S3200
Black/Clear, Ultra-dura Anti-scratch
S3533X
Black & Yellow/50% Gray, Uvextreme Anti-fog
S3200D
Black/Clear, Dura-streme, Dual Anti-fog/Anti-scratch
S3200X
Black/Clear, Uvextreme Anti-fog
S3201
Black/Espresso, Ultra-dura Anti-scratch
S3201X
Black/Espresso, Uvextreme Anti-fog
S3202
Black/Amber, Ultra-dura Anti-scratch
S3202X
Black/Amber, Uvextreme Anti-fog
S3203
Black/Gold Mirror, Ultra-dura Anti-scratch
S3205X
Black/SCT-Gray, Uvextreme Anti-fog
S3206
Black/Shade 2.0 Infra-dura, Ultra-dura Anti-scratch
S3208
Black/Shade 5.0 Infra-dura, Ultra-dura Anti-scratch
S3209
Black/SCT-Low IR Lens, Ultra-dura Anti-scratch
S3210X
Black/SCT-Vermilion Lens, Uvextreme Anti-fog
S3211X
Black/SCT-Blue Lens, Uvextreme Anti-fog
S3212X
Black/Dark Gray, Uvextreme Anti-fog
S3213X
Black/50% Gray, Uvextreme Anti-fog
S3240
Vapor Blue/Clear, Ultra-dura Anti-scratch
6:8128
,
Engineered for comfort, protection, and style.
Built with MMT (Multi-Material Technology®)
and a high level of adjustability, providing
extraordinary all-day comfort.
,
,
UVEX PROTÉGÉ® SERIES
,
,
PART NO. DESCRIPTION
S4200
Metallic Black/Clear, Anti-scratch
S4200X
Metallic Black/Clear, Uvextreme Anti-fog
S4201
Metallic Black/Gray, Anti-scratch
S4201X
Metallic Black/Gray, Uvextreme Anti-fog
S3240X
Vapor Blue/Clear, Uvextreme Anti-fog
S4202
Metallic Black/SCT-Reflect50, Anti-scratch
S3241
Vapor Blue/Espresso, Ultra-dura Anti-scratch
S4203
Metallic Black/Silver Mirror, Anti-scratch
S3241X
Vapor Blue/Espresso Lens, Uvextreme Anti-fog
S4221XC
Metallic Black/SCT-Blue, Anti-scratch
S3242
Vapor Blue/Amber, Ultra-dura Anti-scratch
S4221XXC
Metallic Black/SCT-Blue, Uvextreme Anti-fog
S3243
Vapor Blue/Gold Mirror, Ultra-dura Anti-scratch
S4222XC
Metallic Black/Amber, Anti-scratch
S3244
Vapor/SCT-Reflect 50, Ultra-dura Anti-scratch
S4222XXC
6:8128
Metallic Black/Amber, Uvextreme Anti-fog
6:8128
HONEYWELLL SAFETY
Y PR
RODUCTS
Proprietary floating lens design offers increased flexibility and fit.
Ultra-lightweight at 27.5 g for all day comfort. Expandable: Secure
wrap-around brow expands to fit a wide range of users.
• Certified to CSA Z94.3 standards
• Wrap-around lens provides exceptional
peripheral vision and protection
• Flexible fingers adjust to most nasal profiles
• Elastomer browguard deflects impact
• Certified to CSA Z94.3 standards
UVEX GENESIS® SERIES
,
EYE PROTECTION CONTINUED ON NEXT PAGE
154
HONEYWELL SAFETY PRODUCTS Code: 230
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
S0600
SAFETY
S0602X
EAR PROTECTION
IMPACT™ SPORT
ELECTRONIC EARMUFF
• Keeps wearers both protected from
hazardous noise and connected to their
environment
• Built-in directional microphones amplify
range commands and other ambient
sounds to a safe 82 Db, allowing wearers
to hear important communications
S0601X
UVEX SEISMIC® SEALED EYEWEAR
Contemporary style. Provides protection against impact, sun,
wind, dust, and airborne debris. Ideal for high-particulate
environments such as grinding, chipping and sanding.
PART NO. DESCRIPTION
S0600
Black/Clear, Anti-scratch
S0600X
Black/Clear, Uvextreme Anti-fog
S0600D
Black/Clear, Dura-streme Dual, Anti-fog/Anti-scratch
S0601X
Black/Expresso, Uvextreme Anti-fog
S0602X
Black/Amber, Uvextreme Anti-fog
S0604X
Black/SCT-Reflect 50 Lens, Uvextreme Anti-fog
SYNC™ RADIO/
STEREO EARMUFF
6:8128
1013941
S3960C S3961C S3962C S39610C
UVEX STEALTH®
Futuristic, low profile design for chemical splash and impact.
Toric lens provides superior optics and peripheral vision. Quick
adjust headband. Uvextreme anti-fog coating minimizes fogging.
Chemical and scratch resistant.
PART NO. DESCRIPTION
S3960C
Gray/Clear, Uvextreme Anti-fog
S3961C
Gray/Gray, Uvextreme Anti-fog
S3962C
Gray/Amber, Uvextreme Anti-fog
S39610C
Teal/Gray, Uvextreme Anti-fog
6:8128
HONEYWELLL SAFETY
Y PR
RODUCTS
1.16 oz cleaning solution, 4 BX of 500 tissues, 3.5” x 4.5”. Screw
mounts and adhesive foam included. Measures 22.5” x 12.5”.
UVEX CLEAR® DISPOSABLE
LENS CLEANING
Portable and disposable. 1 16 oz cleaning spray, and 1,500 tissues.
UVEX CLEAR TOWELETTES
Pocket sized, lens cleaning, 100/box.
UVEX HANG CORDS
1010922
LEIGHTNING® NOISE
BLOCKING EARMUFFS
• Steel-wire construction provides high performance and robust durability
• The Leightning® series also features Bilsom®
Technology’s patented Air Flow Control™
technology for optimal attenuation across
all frequencies and snap-in ear cushions for
easy maintenance
Provides proper levels of hearing protection, highfidelity sound and ability to listen to portable audio
devices safely at work – and at home.
• Plugs into any smartphone or mp3 player,
3.5 mm input cable included
• NRR 25
• Volume Management Technology™
• Perfect for DIY, travel, or anytime
• Black
PART NO. DESCRIPTION
1011996
Model-L3N, Black,
Neckband, Metal, NRR 28
1010922
Model-L1, Light Gray,
Headband, Metal, NRR 25
1011993
Model-L3H, Black, Helmet,
Metal, NRR 27
1013941
Model-Hi-Visibility L3HV,
Bright Green, Headband,
Metal, NRR 30
UVEX CLEAR®
PERMANENT LENS
CLEANING STATION
Black, universal neck cord.
155
YV
QM24+®
NOISE
BLOCKING
EARMUFFS
• Ultra lightweight design, only 6 oz
• Features an adjustable crown strap for a
secure fit over the head, behind the head
and below the chin
• Alternative to cap-mounted earmuffs –
wear with hard hats, face shields,
respirators and other PPE
VIKING™ NOISE
BLOCKING EARMUFFS
• Multiple position: wear over or behind the head,
or under the chin
• Can be worn with other PPE, including hard
hats, visors, face shields, respirators and
welding shields
• Patented Air
• Flow Control™
• Dielectric construction suitable for electrical
environments
PART NO. DESC. NRR RATING
1010925
V1-Blue
25 dB
1010926
V2-Blue
27 dB
1010927
V3-Black
29 dB
HONEYWELL SAFETY PRODUCTS Code: 230
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
MAX® SINGLE USE EAR PLUGS
,
,
SAFETY
• Smooth, soil-resistant closed cell-foam skin prevents
• Coral
dirt build-up
• One size fits all
• MAX® offers superior • Bulk refills for Leight® Source 400 and Leight®
Source 500 Earplug
noise-blocking
Dispensers save time, waste and space
performance
• World’s most used
polyurethane foam
PART NO. CORDED PACKAGING
earplug
Uncorded
Polybag [200 PR box]
MAX-1
• Bell shape delivers
maximum in-ear
Uncorded
400 Refill Bag [200 PR]
MAX-LS4
comfort
Uncorded
500 Refill Box [500 PR]
MAX-1-D
• Contoured design
easier to insert, resists
Corded
Polybag
[100 PR box]
MAX-30
tendency to back-out
of ear canal
SINGLE USE EARPLUG
DISPENSERS
PART NO. DESC.
$
LASER LITE® SINGLE
USE EAR PLUGS
MAX LITE®
SINGLE USE
EAR PLUGS
• Magenta/yellow,
polyurethane foam
• One size fits all
• Vibrant colours make
protection visible
$
PART NO. CORDED PACKAGING
LL-1
Uncorded
Polybag [200 PR box]
LL-LS4
Uncorded
400 Refill Bag [200 PR]
LL-1-D
Uncorded
500 Refill Box [500 PR]
LL-30
Corded
Polybag [100 PR box]
$
SMARTFIT® MULTIPLE
USE EARPLUGS
• Delivers superior
• Multiple-use
comfort and a
reusable earplugs
truly individual fit
with Patented
Conforming Mate- • Detachable cord
rial Technology™
system and
HearPack®
• Uses body heat
storage case
to adapt to the
individual shape • One size fits all
of each wearer’s
ear canal
PART NO. CORDED
PACKAGING
SMF-30
SmartFit®Corded. Colour:
Orange, 3-Flange
Paper Bag/Attached
Cotton Cord [100 PR box]
SMF-30W-P
SmartFit® Process
Industry. Colour: Orange,
Attached Cotton Cord
Paper Bag/Attached
Cotton Cord [100 PR box]
SDT-30
SmartFit® Detectable.
Colour: Blue, Corded
Polybag [100 PR box]
400 PCS
LS-500
500 PCS
MULTI MAX®
SINGLE USE
EAR PLUGS
PART NO. CORDED PACKAGING
• Coral/yellow
• Flexibility, protection
and economy in
hearing protection
with its two-sizes-inone design, improving
individual fit
LPF-1
Uncorded
Polybag
[200 PR box]
PART NO. CORDED PACKAGING
LPF-LS4
Uncorded
400 Refill Bag
[200 PR]
MM-1
Uncorded
Polybag
[200 PR box]
LPF-30
Corded
Polybag
[100 PR box]
MM-LS4
Uncorded
400 Refill Bag
[200 PR]
AIRSOFT® MULTIPLE USE
EARPLUGS
• New four-flange
design creates a
better seal in the
ear canal, delivering
optimal protection
and increased
comfort for longterm wear
• One size fits all
DPAS-30W
• For people who are
exposed to intermittent
noise
• One size fits all
• Patented band design
prevents ear pods
from touching dirty or
contaminated surfaces
Y'&
• Lightweight and portable
• Includes a pair of
replacement pods
PACKAGING
PART NO. CORDED
Blue Colour
with Red
Polycord,
4-Flange
Flip-Top Box
[100 PR box] or
Reusable Case
[50 PR box]
QB1HYG
Yellow Band/
Orange, NRR 27
Inner
QB2HYG
Orange Band/
Orange, NRR 25
Supra
Blue Colour
with White
Nylon Cord,
4-Flange
Flip-Top Box
[100 PR box] or
Reusable Case
[50 PR box]
QB3HYG
Red Band/Orange Semi
Pods, NRR 23
PART NO. CORDED
DPAS-30R
BANDED EARPLUGS
AURAL
HONEYWELLL SAFETY
Y PR
RODUCTS
Green. Ideal size
for workers with
smaller ear canals.
Contoured T-shape
for easy handling
and wear.
LS-400
156
HONEYWELL SAFETY PRODUCTS Code: 399
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
HEAD PROTECTION
6:8128
SAFETY
HARD HAT
WINTER LINERS
HARD HAT
WITH RATCHET
HARD HAT
WITH RATCHET
• Type 1 Class E, CSA
A79R010000
A79R050000
PART NO. DESC.
• Type 2 Class E, CSA
A89R020000
PART NO. DESC.
A79R010000
White
A89R010000
White
A79R020000
Yellow
A89R020000
Yellow
A79R030000
Orange
A89R030000
Orange
A79R040000
Dark Green
A89R040000
Dark Green
A79R050000
Hi Visibility Red
A89R050000
Hi Visibility Red
A79R060000
Light Blue
A89R060000
Light Blue
A89R070000
Sky Blue
A89R030000
A89R070000
A79R070000
Sky Blue
A79R080000
Navy Blue
A89R080000
Navy Blue
A79R090000
Gray
A89R090000
Gray
A79R060000
WL12FP
WL20RED
A89R090000
%
FOAM SWEATBAND
WITH ELASTIC
PART NO. DESC.
BUMP CAP
PART NO. DESC.
• Pin lock, non-approved
• Elastic pack of 25
BC89010000
White
BC89080000
Navy Blue
BC89150000
Red
WL12FP
With face
protection, royal
blue, FR cotton
WL20RED
Sock type, red,
nylon
BC89010000
FALL PROTECTION
6:8128
CLOTHING
HEARING
PROTECTION
6:8128
6:8128
$
%
NORTH DURABILT
FULL BODY HARNESS
HONEYWELLL SAFETY
Y PR
RODUCTS
157
UNIVERSAL
• Lighweight polyester
• Yellow
• Polyester webbing for greater
resistance to chemicals
• Universal fit
• Large back D ring
• Meets or exceeds all standards
• CSA, ANSI and OHSA
DECELATOR
LANYARD
PART NO. DESC.
FPD26311/4
4 ft
FPD26311/6
6 ft
• 1-3/4” continuous
polyester web
• Shock/energy
absorbing
• Double locking
snap hooks and
rebar hooks
HI VIZ
TRAFFIC VEST ZIPPERED
• Polyester with
reflective stripes
PART NO.
DESC.
TVA2/15NZ/OL
Orange, size L
TVA2/15NZ/OXL
Orange, size XL
280005
280006
HI VIZ MESH
TRAFFIC VEST
• Polyester with
reflective stripes
PART NO. DESC.
TV55RS/1S
Orange
DECI-DAMP2 EARPLUGS
• White, soft-slow recovery vinyl foam,
NRR 29 db
PART NO. DESC.
280005
Uncorded, 200 pairs/box
280006
Corded, 100 pairs/box
HONEYWELL SAFETY PRODUCTS Code: 399
Website: www.honeywellsafetyproducts.com
Online Catalogue: www.honeywellsafety.com
RESPIRATORY PROTECTION
6:8128
P100 PANCAKE
SERIES FILTERS
550030M
(
CARTRIDGE FILTERS
• Protects against organic vapor, chlorine, hydrogen
chloride, sulfur dioxide, hydrogen sulfide (escape),
hydrogen fluoride, chlorine dioxide, ammonia,
methylamine and formaldehyde
5500 SERIES RESPIRATOR
• Compatible with all North cartridges
and filters
• Comfortable, lightweight, non-allergenic
elastomeric face piece NRR 29 db
• Particulate Pancake Filters are specifically designed to fit under most
75FFP100NL
welding helmets and faceshields
PART NO. DESC.
75FFP100
Fits 5500 Series Half Masks. 99.97% efficiency
75FFP100NL
With "Nuisance" Level protection against
organic vapour, acid gas or ozone. Fits 7700
7600 5500 Series masks. 1 pair/pkg
PART NO. DESC.
Defender™ Multi-Purpose
Cartridge, Fits 5400, 5500, 7600 and
7700 North Series Half and Full Face
Masks. 1 pair /pkg, black
75SC
Defender™ Multi-gas and Vapor
Cartridge with P100 Particulate
Filter, Fits: 5400, 5500, 7600, and
7700 North Series Half and Full Face
Masks, 1 pair /pkg, olive/magenta
75SCP100
Organic Vapor Cartridge, Fits
All North Air-Purifying Respirators,
NIOSH-approved, 1 pair /pkg, black
N75001
FIRST AID
6:8128
EYEWASH
STATION SIGN
7580P100
7581P100
P100 RESPIRATOR
CARTRIDGES
• 99.97% minimum filter efficiency
PART NO. DESC.
7580P100
7581P100
Particulate Cartridges for
North Respirators
Gas and Vapour Cartridges
for North Respirators
7130N95
7140N95
N95 DUST MASK
PART NO. DESC.
• Exceptional fit and comfort
• Soft cushioned nose seal
and curved nose clip
• Exhalation valve for cooler
and easier breathing
7130N95
20/box
7140N95
10/box
EYESALINE® EMERGENCY
WALL STATION
DESC.
EYESALINE®
EYEWASH
SOLUTION
32-000460-0020
Sterile eyewash, single
16 oz/473 ml bottle
32-000461-0020
Sterile eyewash, single
32 oz/946 ml bottle
32-000462-0000
Sterile eyewash, 2 x 32
oz/946 ml bottles
INDUSTRIAL FIRST AID KITS
PART NO. DESC.
PART NO.
DESC.
$
32-000454-0000
16 oz/473 ml
bottle
ROAD HAZARD FIRST AID KIT
32-000455-0000
32 oz/946 ml
bottle
• Zippered nylon
bag with two
handles, 10” x
8” x 3”
FA25
25 employees or less
FA50
25 employees or more
FA33
200 employees or less
1617/287C
TRAFFIC CONE
• 28” orange LDPE
Traffic cone with 6”
North-Brite retroreflective collar
HONEYWELLL SAFETY
Y PR
RODUCTS
• Includes a sealed sterile bottle of buffered
Saline solution
• Blow-fill-sealed bottle is tamper resistant,
yet easily removed in an emergency
• Durable, open face design, holds bottle
firmly in place, yet easy to access
• Highly visible instructions are provided
on each unit in English/French, screws
included
PART NO.
• Sterile Isotonic
Solution Refills
SAFETY
75FFP100
1617/287C6NB
158
TERRA FOOTWEAR Code: 298
Website: www.terrafootwear.com
SAFETY
ARROW
SENTRY
• Rubber outsole • Full grain leather upper
with PU midsole • Steel toe and steel plate
in forefoot and
• CSA approved Grade 1
PU midsole in
toe cap, puncture
heel area
resistant, ESR
• Direct injected PU
midsole, TPU outsole
and PU bumper toe
• Water resistant
Terra®-ized leather
Cambrelle® lining
BARON
BRIDGE
GAITER II
• Slip resisting,
Anti-F.O.D. rubber
outsole
• Terra FirmaFlex Metal-Free
Technology
• Cleanfeet® treated
moisture wicking
lining
• Made in Canada
• Terra Firma-Flex
Metal-Free Technology
• 200 g Thinsulate™
Insulation
• Full grain waterproof
leather upper
• Direct injected PU
midsole with external
stability chassis
• Rubber outsole
• Full grain waterproof
leather upper
• Leather lining
• Steel toe and flexible
composite plate
• Slip resisting rubber
outsole
• Made in Canada
• 200 g Thinsulate™ insulation
• Steel toe and steel plate
• CSA approved Grade 1 toe
cap, puncture resistant, ESR
• Made in Canada
SIZE ARROW
PART NO.
BARON BRIDGE GAITER II SENTRY
7
749235-7
2925B-7
915532-7
7193GE-7
1995B-7
7.5
N/A
2925B-75
N/A
N/A
1995B-75
8
749235-8
2925B-8
915532-8
7193GE-8
1995B-8
8.5
749235-85
2925B-85
915532-85
7193GE-85
1995B-85
9
749235-9
2925B-9
915532-9
7193GE-9
1995B-9
9.5
749235-95
2925B-95
915532-95
7193GE-95
1995B-95
10
749235-10
2925B-10
915532-10
7193GE-10
1995B-10
10.5
749235-105 2925B-105
915532-105 7193GE-105
1995B-105
11
749235-11
2925B-11
915532-11
7193GE-11
1995B-11
12
749235-12
2925B-12
915532-12
7193GE-12
1995B-12
13
749235-13
14
N/A
2925B-13
915532-13
7193GE-13
1995B-13
2925B-14
915532-14
7193GE-14
N/A
KODIAK BOOTS Code: 567
Website: www.kodiakboots.com
PART NO. SIZE
TTEER
TER
RR
RA / KO
ODIA
DIAK
159
302113-7
7
302113-7.5
7.5
302113-8
8
302113-8.5
8.5
TREK
302113-9
9
• Waterproof leather with
Waterproof Membrane
• 200 g Thinsulate™
Insulation
• Rockfibre® Metal-Free
Technology
• Slip Resisting and oil
resistant rubber outsole
302113-9.5
9.5
302113-10
10
302113-10.5
10.5
302113-11
11
302113-12
BLUE 6”
BLUE MONSTER
• Woman’s boot
• Premium nubuck/full
grain, water resistant
leather upper
• Anatomical off-center
womens design,
patented, padded,
anatomical tongue
• Removable COMFORT
ZONE 2-density PU
insole
• Lightweight,
aluminum toe cap
• Flexible
composite puncture
resistant plate
• Exclusive claw design,
oil resistant rubber
outsole
• CSA approved Grade 1
• 200 g Thinsulate™
insulation
• Waterproof leather and
waterproof membrane
• Anatomical, off-center
design, patented, padded,
anatomical tongue
• Double-layered, rubber
back counter
• Molded, abrasion
resistant TPU toe guard
• Removable COMFORT
ZONE 2-density PU insole
• Goodyear welt
construction combined
with direct bonded
process
• Shock absorbing PU
midsole, EVA
cushioning pad
• Exclusive claw design, oil
and slip resistant rubber
outsole
• KODIAK ROCKFIBRE
Metal-Free Technology
• CSA approved Grade 1
PART NO. SIZE
614004-5
5
614004-6
6
614004-6.5
6.5
614004-7
7
614004-7.5
7.5
614004-8
8
614004-8.5
8.5
614004-9
9
12
614004-9.5
9.5
302113-13
13
614004-10
10
302113-14
14
PART NO. SIZE
309024-8
8
309024-8.5
8.5
309024-9
9
309024-9.5
9.5
309024-10
10
309024-10.5
10.5
309024-11
11
309024-12
12
309024-13
13
309024-14
14
309024-15
15
RED RAM MERINO CLOTHING INC. Code: 715
Website: www.redram.com
GENERAL CLOTHING FEATURES
RED RAM LONG SLEEVE TOP MEN’S
Long sleeve base layer
•
•
•
•
•
Crewe neck
Raglan sleeves
Forward side panel
Flatlock stitching
Red Ram branded pip label
PART NO.
DESC./SIZE
RBRE01001M
Black, Medium
RBRE01001L
Black, Large
RBRE01001XL
Black, X-Large
RBRE01001XXL
Black, XX-Large
RBRE01001XXXL
Black, XXX-Large
•
•
•
•
WARM WHEN DAMP OR WET
NOT FLAMMABLE
MACHINE WASHABLE
COMFORTABLE IN ALL CONDITIONS
RED RAM SHORT SLEEVE TOP MEN’S
Short sleeve base layer
•
•
•
•
•
Crewe neck
Raglan sleeves
Forward side panel
Flatlock stitching
Red Ram branded pip label
PART NO.
DESC./SIZE
RBRE00001M
Black, Medium
RBRE00001L
Black, Large
RBRE00001XL
Black, X-Large
RBRE00001XXL
Black, XX-Large
RBRE00001XXXL
Black, XXX-Large
RED RAM BOXER SHORT MEN’S
Long underwear bottom black
Boxer short with fly black
•
•
•
•
•
•
•
•
•
•
•
•
Fly
Gusset for ease of movement
No centre back seam
Flatlocking stitching
Red Ram branded waistband
Red Ram branded pip label
PART NO.
DESC./SIZE
PART NO.
DESC./SIZE
RBRE02001M
Black, Medium
RBRE04001M
Black, Medium
RBRE02001L
Black, Large
RBRE04001L
Black, Large
RBRE02001XL
Black, X-Large
RBRE04001XL
Black, X-Large
RBRE02001XXL
Black, XX-Large
RBRE04001XXL
Black, XX-Large
RBRE02001XXXL
Black, XXX-Large
RBRE04001XXXL
Black, XXX-Large
RED RAM MERINO CLLOTTHING INC
RED RAM LEGGING WITH
FLY - MEN’S
Fly
Gusset for ease of movement
No centre back seam
Flatlocking stitching
Red Ram branded waistband
Red Ram branded pip label
SAFETY
• 200 GRAMS RIB KNIT FABRIC PERFECT FOR THERMAL UNDERWEAR
• NO STINK
• NOT ITCHY
160
RICHLU MANUFACTURING Code: 219
Website: www.richlu.com
GLOVES AND ACCESSORIES
SAFETY
RICH
HLU MANU
UFA
ACTURING
161
G41112 SNOWMOBILE MITT
G40112 SNOWMOBILE GLOVE
G79716 SAFETY GLOVE
•
•
•
•
•
•
•
•
•
•
•
•
• Goatskin palm
• Hi vis polyester fabric back
• Reflective striping
Deer grain leather palm/Oxford polyester shell
Pre-curved hand
Adjustable hook and loop strap
100 g Thinsulate™ insulation
Reflective piping
Removable fleece/padded liner
Deer grain leather palm/Oxford polyester shell
Pre-curved hand
Adjustable hook and loop strap
100 g Thinsulate™ insulation
Reflective piping
Removable fleece/padded glove liner
PART NUMBER
DESC./SIZE
PART NUMBER
DESC./SIZE
G41112-BL-L
Black, Large
G40112-BL-L
Black, Large
G41112-BL-XL
Black, X-Large
G40112-BL-XL
Black, X-Large
I15316 WASHED
AVIATOR HAT
I15016 DUCK
AVIATOR HAT
• 100% polyester canvas
shell with wax finish
• 100% quilted fleece
lining with 40 g of 3M
Thinsulate™
• 100% Polyester pile
lining
• “Hearing” holes under
ear flaps
• Adjustable chin strap
• Chestnut only
• Shell: 100% cotton duck
• Lining: 100% cotton
quilted to 40 g Thinsulate™
• Pile trim: 100% polyester
• Snap up and down visor
with pile trim button
• Up and down pile trimmed ear cover
• “Hearing” holes under ear flaps
• Adjustable chin straps
• Black
PART NUMBER
DESC./SIZE
PART NUMBER
DESC./SIZE
I15316-CN-L
Chestnut, Large
I15016-BL-L
Black, Large
I15316-CN-XL
Chestnut, X-Large
I15016-BL-XL
Black, X-Large
G79616 SAFETY
PRECISION
GLOVE
GI5516 PRECISION
FIT COLD
WEATHER GLOVE
• Synthetic suede palm with
anti-slip PU double palm
• Enprotex waterproof
breathable liner
• Reflective striping
on back
• Poly spandex safety
orange back
• Adjustable wrist strap
• Durable stretch nylon with 40
g of Thinsulate™
• Double stitched palm with
finger pads
• Protected knuckle area and
terry cloth thumb
• Pull tab with snap at wrist to
keep gloves together when
not in use
PART NUMBER
DESC./SIZE
PART NUMBER
DESC./SIZE
G79616-BL-L
Black, Large
GI5516-BL-L
Black, Large
G79616-BL-XL
Black, X-Large
GI5516-BL-XL
Black, X-Large
PART NUMBER
DESC./SIZE
G79716-CR-L
Orange, Large
G79716-CR-XL
Orange, X-Large
I26616 ACRYLIC
WATCH CAP WITH
STRAPS
•
•
•
•
•
100% acrylic
Straps to fit hard hats
Reflective tape on cuff
One size fits most
Blaze orange
I26716 CAP WITH EAR
FLAPS
•
•
•
•
•
Water repellent nylon
Lining: 100% polyester fleece
Drop earband with reflective binding
Reflective binding around circumference
Pre-curved visor with reflective
sandwich trim
• One size fits most
• Blaze orange
RICHLU MANUFACTURING Code: 219
Website: www.richlu.com
TOUGH DUCK
2510 SOFT
SHELL JACKET
•
•
•
•
• 100% cotton duck bonded to
micro fleece
• Fabric is waterproof and breathable
• Shock cord drawstring at waist
• Drop back
• Adjustable cuffs
Fabric: 65/35 poly/cotton shell
Quilted 2.7 oz poly insulation
Attached double hood with drawstring
Inside pocket with velcro closure
PART NO.
DESC./SIZE
I47416-BL-S
Black, Small
I47416-BL-M
Black, Medium
I47416-BL-L
Black, Large
I474216-BL-XL
Black, X-Large
I47426-BL-2XL
Black, 2X-Large
DESC./SIZE
251016-BL-M
Black, Medium
251016-BL-L
Black, Large
251016-BL-XL
Black, X-Large
251026-BL-2XL Black, 2X-Large
2510B WASHED
SOFT SHELL
2710 POLY OXFORD
HOODED JACKET
• 100% cotton washed duck
bonded to microfleece
• Fabric is waterproof and breathable
• Drop back
• Shell: 600D Poly oxford waterproof and
breathable fabric, 5000/5000 protection.
Lining: Quilted 6oz polyester insulation
• Attached hood and zip fooler front
• Drop back
• Hidden embriodery access zipper
• Inside pocket, MP3 and cell pocket
PART N0.
DESC./SIZE
25101B-CN-M
Chestnut, Medium
25101B-CN-L
Chestnut, Large
PART NO.
DESC./SIZE
25101B-CN-XL
Chestnut, X-Large
276116-BL-M
Black, Medium
25102B-CN-2XL
Chestnut, 2X-Large
276116-BL-L
Black, Large
276116-BL-XL
Black, X-Large
276126-BL-2XL
Black, 2X-Large
I9L4 POLY OXFORD 3-IN-1 PARKA I8A2 ZIP-OFF SLEEVE JACKET
2137 WORK JACKET
• Shell: 10 oz cotton
Tough Duck™. Sleeves and
hood: Jersey fleece. Shell and
Lining: 6 oz poly insulation
• Detachable sleeves
convert to vest
• Detachable jersey
fleece hood
• Drop back
• Storm flap over front zipper
• Inside pocket and cell pocket
• Fabric: 12 oz 100%
Cotton Tough Duck™.
Lining: Nylon quilted
to 6 oz poly insulation
• Heavy-duty brass
zipper
• 2 adjustable waist
tabs
• Inside pocket with
velcro closure
• Adjustable shank
button closure on cuff
Black, Medium
PART NUMBER
BROWN
CHESTNUT
SIZE
21371B-CN-M
Medium
PART NUMBER DESC./SIZE
PART NUMBER DESC./SIZE
I9L416-BL-M
I8A216-BL-M
I9L416-BL-L
Black, Large
I8A216-BL-L
Black, Large
213716-BR-M
I9L416-BL-XL
Black, X-Large
I8A216-BL-XL
Black, X-Large
213716-BR-L
21371B-CN-L
Large
Black, 2X-Large
213716-BR-XL
21371B-CN-XL
X-Large
213726-BR-2XL
21372B-CN-2XL
2X-Large
I9L416-BL-2XL
Black, 2X-Large
I8A226-BL-2XL
RICH
HLU MANU
UFA
ACTURING
• Shell: 600D poly
oxford with PU
coating
• Insulated Zip-Out liner
• Reflective striping
on shell
• Drop back
• Hidden embroidery
access zipper
• Zip off hood included
Black, Medium
PART NO.
SAFETY
I474 HOODED JERSEY
BOMBER
162
RICHLU MANUFACTURING Code: 219
Website: www.richlu.com
TOUGH DUCK
SAFETY
7637 UNLINED
BIB OVERALL
7537
INSULATED
BIB OVERALL
• Fabric: 12 oz 100%
Cotton Tough Duck™
• Elasticized adjustable
shoulder straps
• Hammer loop and
ruler pocket
• Brass zipper front
closure
• Chest pocket with
pencil slot
• Exclusive double
front legs
7910 POLY
OXFORD INSULATED BIB
OVERALL
• Fabric: 12 oz 100%
Cotton Tough Duck™
Lining: Nylon quilted to
6 oz poly insulation
• Elasticized adjustable
shoulder straps
• Seam sealed
waterproof seat and
double knees
• Exclusive double front
with heavy-duty, 2-way
side leg zippers
• Turned under hem
extends 3” tall
• Shell: 600D Poly oxford
waterproof and breatheable
fabric, 5000/5000
protection. Lining: Quilted
6 oz poly insulation
• 2-way covered leg zippers
from ankle to hip
• Double front with knee
pad pockets
• Knees, cuffs and trim
reinforced with HD Cordura
• Multi pockets, side entry
• Elasticized adjustable
shoulder straps
• Turned under hem
extends 3” tall
PART NUMBER DESC./SIZE
PART NUMBER DESC./SIZE
PART NUMBER DESC./SIZE
763716-BR-M
Brown, Medium
753716-BR-M
Brown, Medium
791016-BL-M
Black, Medium
763716-BR-L
Brown, Large
753716-BR-L
Brown, Large
791016-BL-L
Black, Large
763716-BR-XL
Brown, X-Large
753716-BR-XL
Brown, X-Large
791016-BL-XL
Black, X-Large
763726-BR-2XL
Brown, 2X-Large
753726-BR-2XL
Brown, 2X-Large
791026-BL-2XL
Black, 2X-Large
WORK KING
RICH
HLU MANU
UFA
ACTURING
163
I193 POCKET T-SHIRT
I9400 QUILT LINED
FLANNEL SHIRT
• Fabric: 60% cotton 40% polyester
• Reinforced shoulder seam/rib
knit collar
• Chest patch pocket with
reinforced corners
• Double needle hem and sleeve
• Fabric: 100% cotton yarn dyed flannel, double
pre-shrunk. Lining: Quilted polyester insulation
• Heavy-duty spring snaps
• 2 chest pockets with flap and snap closures
• 2 lower on-seam pockets
• Adjustable cuffs
PART NO.
DESC./SIZE
I94001-FL-M
Assorted Plaids, Medium
I94001-FL-L
Assorted Plaids, Large
I94001-FL-XL
Assorted Plaids, X-Large
I94001-FL-2XL
Assorted Plaids, 2X-Large
I7X9 QUILTED
FREEZER JACKET
•
•
•
•
Fabric/lining: Quilted polyester
Drop tail
Knit collar and cuffs
Inside pocket and cell pocket
PART NO.
DESC./SIZE
I7X911-BL-M
Black, Medium
I7X911-BL-L
Black, Large
PART NO.
WHITE
PART NO.
NAVY
PART NO. SIZE
BLACK
I19311 -WH-M
I19311 -NA-M
I19311-BL-M
Medium
I7X911-BL-XL
Black, X-Large
I19311 -WH-L
I19311 -NA-L
I19311-BL-L
Large
I7X921-BL-2XL
Black, 2X-Large
X-Large
7X921-BL-3XL
Black, 3X-Large
I19311 -WH-XL
I19311 -NA-XL
I19311-BL-XL
RICHLU MANUFACTURING Code: 219
Website: www.richlu.com
6053 RELAX FIT JEAN STONE WASH
WORK KING
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
605301-DE-32
30"
32"
605311-DE-32
32"
32"
605341-DE-34
34"
34"
605301-DE-34
30"
34"
605311-DE-34
32"
34"
605341-DE-36
34"
36"
605301-DE-36
30"
36"
605311-DE-36
32"
36"
605341-DE-38
34"
38"
605301-DE-38
30"
38"
605311-DE-38
32"
38"
605341-DE-40
34"
40"
605301-DE-40
30"
40"
605311-DE-40
32"
40"
605351-DE-34
36"
34"
605301-DE-42
30"
42"
605311-DE-42
32"
42"
605351-DE-36
36"
36"
605301-DE-44
30"
44"
605311-DE-44
32"
44"
605351-DE-38
36"
38"
SAFETY
• Fabric: 14.5 oz 100% cotton stone wash denim
• Extra cut for easy, generous fit
• Rivets at all stress points
• 5 pocket design/watch pocket
• 7 belt loops/brass zipper
6052 STRAIGHT LEG JEAN STONE WASH
• Fabric: 14.5 oz 100% cotton stone wash denim • Rivets at all stress points
• 5 pocket design/watch pocket
• 7 belt loops/brass zipper
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
PART
INSEAM/ WAIST
NUMBER LENGTH SIZE
605201-DE-32
30"
32"
605211-DE-32
32"
32"
605241-DE-34
34"
34"
605201-DE-34
30"
34"
605211-DE-34
32"
34"
605241-DE-36
34"
36"
605201-DE-36
30"
36"
605211-DE-36
32"
36"
605241-DE-38
34"
38"
605201-DE-38
30"
38"
605211-DE-38
32"
38"
605241-DE-40
34"
40"
605201-DE-40
30"
40"
605211-DE-40
32"
40"
605251-DE-34
36"
34"
605201-DE-42
30"
42"
605211-DE-42
32"
42"
605251-DE-36
36"
36"
605201-DE-44
30"
44"
605211-DE-44
32"
44"
605251-DE-38
36"
38"
I063 UNLINED
LONG SLEEVE
COVERALL
7121 LINED
TWILL
COVERALL
• Fabric: 10 oz 100%
cotton duck.
Lining: 6 oz
polyester insulation
• Waterproof seat
and knees
• Double knees with
knee pad pockets
• 2-way front and leg
zippers from ankle to
hip with storm flaps
and snap closures
• Multi pocket design
• Fabric: 7.5 oz
65/35 poly/cotton
• Loss-proof front pocket
• Banded waist
• Covered 2-way
brass zipper
• Fabric: 65/35 polyester/
cotton twill. Lining:
4 oz polyester insulation
• Side openings for easy
inside access
• Banded waist with
elasticized back
PART NO.
DESC./SIZE
794011-BL-M
Black, Medium
DESC./SIZE
PART NO.
DESC./SIZE
I06311-NA-M
Navy, Medium
712111-NA-M
Navy, Medium
794011-BL-L
Black, Large
I06311-NA-L
Navy, Large
712111-NA-L
Navy, Large
794011-BL-XL
Black, X-Large
I06311-NA-XL
Navy, X-Large
712111-NA-XL
Navy, X-Large
794021-BL-2XL
Black, 2X-Large
Navy, 2X-Large
712121-NA-2XL
Navy, 2X-Large
PART NO.
I06321-NA-2XL
RICH
HLU MANU
UFA
ACTURING
7940 DELUXE
LINED BIB
OVERALL
164
RICHLU MANUFACTURING Code: 219
Website: www.richlu.com
WORK KING SAFETY
SAFETY
S426 LINED 5-IN-I JACKET
S798 LINED INSULATED BIB
OVERALL
• Shell ext: 100% Polyester with PU coating.
Lining: 100% Polyester, 6 oz Quilted insulation.
3M “Scotchlite” Reflective Material with
4” contrasting backing
• Removable hi-vis liner (reverses to black)
with zip off sleeves
• Quick-release hard hat hood
• CSA-Z96-09 Class 2 level 2
• Sizes small to 4XL available, size large
to 2XL available in tall
• Fabric: 100% polyester with PU coating.
Lining: 6 oz quilted insulation. 3M “Scotchlite”
reflective material with 4” contrast backing
• Ankle to hip Delrin zipper
• Fly front w 2-way zipper
• Turned hem allows for 3” tall extension
• CSA-Z96-09 Compliant Class 2, Level 2
• ANSI107-2010 Compliant Class 2, Level 2
• Sizes S-5XL available
PART NO.
ORANGE
PART NO.
YELLOW/GRN
SIZE
S42611-OR-M
S42611-YG-M
Medium
S42611-OR-L
S42611-YG-L
Large
S42611-OR-XL
S42611-YG-XL
S42621-OR-2XL S42621-YG-2XL
X-Large
2X-Large
PART NO.
YELLOW/GRN
SIZE
S79811-OR-M
S79811-YG-M
Medium
S79811-OR-L
S79811-YG-L
Large
S79811-OR-XL
S79811-YG-XL
X-Large
S79821-OR-2XL
S79821-YG-2XL
2X-Large
S432 QUILTED SAFETY JACKET
S313 SURVEYOR VEST
• Fabric: 100% polyester. Lining: 100% quilted
polyester. 3M “Scotchlite” reflective material
with 4” contrasting backing
• Rib-knit collar and cuffs
• Drop back
• CSA-Z96-09 Compliant Class 2, Level 2
• ANSI107-2010 Compliant Class 2, Level 2
• Sizes available S-5XL
• Fabric: 100% polyester twill, 3M “Scotchlite”
reflective material with 4” contrast backing
• Multi pocketed design
• Large rear zippered pouch pocket
• Side snaps for seasonal fit adjustability
• Side mesh vents and safety harness hole
• CSA-Z96-09 Compliant Class 2 Level 2
• ANSI107-2010 Compliant Class 2 Level 2
PART NO.
ORANGE
PART NO.
YELLOW/GRN
SIZE
PART NO.
ORANGE
PART NO.
YELLOW/GRN
SIZE
S43211-OR-M
S43211-YG-M
Medium
S31311-OR-M
S31311-YG-M
Medium
S43211-OR-L
S43211-YG-L
Large
S31311-OR-L
S31311-YG-L
Large
S43211-OR-XL
S43211-YG-XL
X-Large
S31311-OR-XL
S31311-YG-XL
X-Large
S43221-OR-2XL
S43221-YG-2XL
2X-Large
S31321-OR-2XL
S31321-YG-2XL
2X-Large
S792 POLY/COTTON UNLINED
HI-VIS COVERALL
RICH
HLU MANU
UFA
ACTURING
165
PART NO.
ORANGE
• Fabric: 65% Polyester / 35% Cotton Twill. 3M
“Scotchlite” Reflective Material with 4” yellow backing
• 2-way Delrin zipper with fly front
• Side opening for easy access to underlayers
• Action back with black elastic waist
• CSA-Z96-09 Compliant Class 3 Level 2
• Sizes S- 5XL available orange only
• Tall M-4XL available
PART NO.
ORANGE
SIZE
S494 ZIP FRONT FLEECE HOODIE
• Fabric: 100% Polyester Fleece. Anti-pill finish. 3M
“Scotchlite” Reflective Material with 4” yellow backing
• Quick-release hood included
• Rib-Knit cuffs and waist
• Meets CSA-Z96-09, Class 2, Level 2
• Meets ANSI107-2004, Class 2, Level 2
PART NO.
ORANGE
PART NO.
YELLOW/GRN
SIZE
S49411-OR-S
S49411-YG-S
Small
S49411-OR-M
S49411-YG-M
Medium
S49411-YG-L
Large
S79211-OR-M
Medium
S49411-OR-L
S79211-OR-L
Large
S49411-OR-XL
S49411-YG-XL
X-Large
S79211-OR-XL
X-Large
S49421-OR-2XL
S49421-YG-2XL
2X-Large
S79221-OR-2XL
2X-Large
PURDY Code: 435
Website: www.purdy.com
PURDY PRO-EXTRA®
BRUSHES
• Designed for use with all paints
• These brushes are specially made for
cutting-in with tapered tips
• Designed for use with all paints
• Extra large holding capacity of more
paint for increased production
PART NO. DESC.
PART NO. DESC.
144080115
Clearcut Dale 1-1/2"
144152720
Pro-Extra Glide 2"
144152120
Clearcut Glide 2"
144152725
Pro-Extra Glide 2-1/2"
Pro-Extra Sprig 3"
Pro-Extra PIP 3"
PURDY VALUE PACKS
144152125
Clearcut Glide 2-1/2"
144380730
• Value pack
144152130
Clearcut Glide 3"
144324730
PAINT
PURDY CLEARCUT™
BRUSHES
PART NO. DESC.
140853100
Brush 3-PK XL™
13C810000
6-Piece Kit
PURDY NYLOX™
BRUSHES
• Designed for use with latex paint
• Provides ultra smooth finish
• Number one choice for interior paint
PURDY WHITE BRISTLE
• Designed for use with oil-based paints,
stains and clears
• Soft natural bristle
PART NO. DESC.
PART NO. DESC.
144024010
Adjutant 1"
144080210
Nylox Dale 1"
144024420
White Adjutant 2"
144080215
Nylox Dale 1-1/2"
144116025
Extra Oregon 2-1/2"
144080220
Nylox Dale 2"
144152220
Nylox Glide 2"
144152225
Nylox Glide 2-1/2"
144380230
Nylox Sprig 3"
PURDY BRUSH COMB
PURDY XL™ BRUSHES
• Designed for use with all paints
and stains
• Our most versatile brush for both
interior and exterior projects
PART NO. DESC.
• Makes cleaning easier!
144080310
XL-Dale 1"
144080315
XL-Dale 1-1/2"
144152315
XL-Glide 1-1/2"
144080320
XL-Dale 2"
144152320
XL-Glide 2"
144064320
XL-Bow 2"
PURDY CONTRACTOR
1ST ROLLER COVERS
PURDY WHITE DOVE™
ROLLER COVERS
144153320
XL-Cub 2"
• Designed for all sheens
• To be used with both latex and oil
based paints
• Very smooth to rough surfaces
• Ideal for interior and exterior
• For all latex and oil paints
144080325
XL-Dale 2-1/2"
144152325
XL-Glide 2-1/2"
144064325
XL-Bow 2 1/2"
144152330
XL-Glide 3"
144064330
XL-Bow 3"
144380330
XL-Sprig 3"
144060930
XL-Blue Heron 3"
144400330
XL-Swan 3"
PART NO. DESC.
PART NO. DESC.
14A688M95
CFK 1 Cover 240 mm
140671M92
WD 3/8 Cover 240 mm
14A688M94
CFK 3/4 Cover 240 mm
140670M93
WD 1/2 Cover 240 mm
14A688M93
CFK 1/2 Cover 240 mm
PURDY
166
KRYLON Code: 435
Website: www.krylonindustrial.com
LINE UP® REMOVABLE SYNTHETIC TURF MARKING PAINT BULK
PAINT
• Removable synthetic turf paint is a high-solids formula for bright, bold, vivid lines
• Fast-drying removable paint specifically formulated for striping lines on synthetic
turf fields
• Ideal for use on any synthetic turf surfaces to switch out the field quickly
• Highly pigmented formulas fortified with optical brighteners
• Crisp, sharp stripes for eye catching lines that pop under lighting
• Won’t stain uniforms
• Removable for quick field layout changes
KRYLON
167
PART NO.
DESCRIPTION
K08405000
White Aerosol
K08406000
Yellow Aerosol
K52230404-20
White - 5 Gallon
K08400001
1 Gallon - Remover
K08400005
5 Gallon - Remover
LINE-UP® PAVEMENT
STRIPING WATER-BASED
PAINT
LINE-UP® PAVEMENT
STRIPING SOLVENTBASED PAINT
For diverse applications and provides long-lasting
durability on outdoor pavement for marking parking
lots, curbs, and streets, as well as on indoor surfaces.
Safe for use on asphalt, concrete, brick and stone.
Provides long-lasting durability on outdoor
pavement for marking parking lots, curbs,
and streets, as well as on indoor surfaces.
PART NO.
DESCRIPTION
K41130404-16
Parking Lot White, 3.78 L (1 gal)
K41132920-16
Parking Lot Yellow, 3.78 L (1 gal)
K41131881-16
Parking Lot Handicap Blue, 3.78 L (1 gal)
K41130110-16
Parking Lot Firelane Red, 3.78 L (1 gal)
K41130404-20
Parking Lot White 18.9 L (5 gal)
K41132920-20
Parking Lot Yellow 18.9 L (5 gal)
K41131881-20
Parking Lot Handicap Blue 18.9 L (5 gal)
K41130110-20
Parking Lot Red 18.9 L (5 gal)
PART NO.
DESCRIPTION
K42130404-16
Parking Lot White,
3.78 L (1 gal)
K42130404-20
Parking Lot White,
18.9 L (5 gal)
K42132920-16
Parking Lot Yellow,
3.78 L ( 1 gal)
K42132920-20
Parking Lot Yellow,
18.9 L ( 5 gal)
LINE-UP® ATHLETIC FIELD MARKING
PAINT BULK - CONCENTRATE AND
READY TO USE
PART NO.
DESCRIPTION
K51130404-20
Extreme Hide White, Ready to Use, Bulk 18.9 L
(5 gal)
• Fast-drying paint specifically formulated for striping lines on
grass fields, cinder, dirt and other natural playing surfaces
• Ideal for use on football, soccer, baseball and golf courses
• Highly pigmented formulas fortified with optical brighteners
• Crisp, sharp stripes for eye catching lines that pop under
stadium lighting
• Won’t harm grass or stunt its growth
• Won’t fade over time or stain uniforms
• Can be custom tinted
K52130404-20
Extreme Hide White, Concentrated, Bulk 18.9
L (5 gal)
K52130101-20
Red, Concentrated, Bulk 18.9 L (5 gal)
K52130113-20
Black, Concentrated, Bulk 18.9 L (5 gal)
K52130499-20
Orange, Concentrated, Bulk 18.9 L (5 gal)
K52131800-20
NFL Blue, Concentrated, Bulk 18.9 L (5 gal)
K52132900-20
Yellow, Concentrated, Bulk 18.9 L (5 gal)
K52137249-20
Bright White, Concentrated, Bulk 18.9 L (5 gal)
K52137253-20
Ultra Deep-Neutral Base, Concentrated, Bulk
18.9 L (5 gal)
KRYLON Code: 435
Website: www.krylonindustrial.com
KRYLON®
INDUSTRIAL
QUIK MARK™
INVERTED
MARKING
CHALKS
KRYLON®
INDUSTRIAL
MINE
MARKING
PAINTS
PAINT
KRYLON®
INDUSTRIAL
QUIK MARK™
INVERTED
MARKING
PAINTS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
S03401
Brilliant White, 340 g
S03501
APWA Orange, Solvent-Based
K04010
Fluorescent Red
S03402
Brilliant Yellow, 340 g
KWBC03501
APWA Orange, Water-Based
K04020
Fluorescent Red/Orange
S03403
Brilliant Orange, 340 g
KWBC03502
APWA Yellow, Water-Based
K04030
Fluorescent Orange
S03404
Brilliant Red, 340 g
KWBC03503
APWA Red, Water-Based
K04050
Fluorescent Green
S03406
Brilliant Blue, 340 g
KWBC03504
APWA Blue, Water-Based
K04070
White
S03407
Brilliant Green, 340 g
KWBC03505
APWA White, Water-Based
S03405
Fluorescent Pink, 340 g
KWBC03506
APWA Green, Water-Based
S03408
Fluorescent Orange, 340 g
S03409
Fluorescent Red, 340 g
S03410
Fluorescent Red/Orange, 340 g
S03500
Clear (extends wear and
impedes fading), 482 g
S03801
Utility Yellow, 482 g
S03901
Brilliant Blue, 482 g
S03903
Blue, 482 g
PART NO. DESCRIPTION
K08305
Athletic White 510 g
S03904
Green, 482 g
K08300
Highway White
K08306
Athletic Yellow 482 g
S03905
Orange, 482 g
K08301
Highway Yellow
K08307
Athletic Orange 482 g
S03911
Brilliant Red, 482 g
K08302
Handicap Blue
K08308000
Athletic Scarlet 482 g
S03610
Fluorescent Safety Red, 482 g
K08303
Firelane Red
K08309000
Athletic Royal 482 g
S03612
Fluorescent Pink, 482 g
K08304
Cover-up Black
K08310000
Athletic Black 482 g
S03620
Fluorescent Caution Blue, 482 g
K08311000
Athletic Maroon 482 g
S03630
Fluorescent Safety Green, 482 g
K08312000
Athletic Purple 482 g
S03650
Fluorescent Red/Orange, 482 g
K08313000
Athletic Navy 482 g
S03700
Fluorescent Orange, 482 g
K08314000
Athletic Fluorescent Orange 482 g
S03715
Fluorescent Purple, 482 g
K08315000
Athletic Fluorescent Green 482 g
K08316000
Athletic Fluorescent Old Gold 482 g
K08317000
Athletic Fluorescent Turf Green 482 g
LINE-UP®
PAVEMENT
STRIPING
PAINT
SOLVENTBASED
AEROSOL
.1/<8:=78212457<6/=/8@
KRYLON®
INDUSTRIAL OVERHEAD
MARKING PAINT
PART NO. DESCRIPTION
K04001000
Fluorescent Red
K04003000
Fluorescent Orange
K04005000
Fluorescent Green
MARKING WANDS
K07095
Hand-held wand
K07096
Wheeled marking wand
K07094000
34” hand-held wand with flag holder
PART NO. DESCRIPTION
STRIPING MACHINES
AND WANDS
PART NO. DESCRIPTION
K08340
34” Pavement
striping machine
K08350
Athletic field
striping machine
K08360
Striping wand
KRYLON
PART NO. DESCRIPTION
LINE-UP® ATHLETIC FIELD STRIPING
PAINT WATER-BASED AEROSOL
168
KRYLON Code: 435
Website: www.krylonindustrial.com
KRYLON® RUST TOUGH®
PART NO. DESC.
PAINT
KRYLON® FARM
& IMPLEMENT
Give your farm, lawn and
garden equipment a fresh,
new look that stands up
to harshest weather and
chemicals. Our paint is
durable, weather resistance
and long lasting.
KRYLON RUST TOUGH®
UTILI-COAT™
Rust Tough® Utili-Coat™ is a rust-preventative
acrylic alkyd enamel that offers state-of-the-art
corrosion protection. Utili-Coat™ provides
excellent gloss and color retention, superior
durability and one-coat coverage.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
K20719000
41805
Utility Tan
New Caterpillar Yellow
K20879
Utility Meter Gray (ASA-49)
41809
School Bus Yellow
K20829
Gray Primer
41816
John Deere Yellow
41817
John Deere/Case Green
41818
American Beauty
Equipment Red
41819
Old Caterpillar Yellow
KRYLON® RUST TOUGH®
HAMM-R-FINISHES™
41927
Stop rust before it
happens by applying
Krylon® Rust Tough®
Rust Preventative
Enamels directly on
your metal surfaces.
It chemically converts
any rust formation to
a black waterproof
primer, it stops rust
from forming and
dries to touch in less
than 30 minutes. No
primer needed!
Ford Blue
Krylon® Rust Tough® Hamm-R-Finishes™
directly on metal. It creates the clean, industrial
look of a hand-hammered metal object, while
stopping the start and spread of rust.
KRYLON
169
Semi-Flat White
49202
Gloss Black
49203
Semi-Flat Black
49206
Battleship Gray
49207
Almond
49210
Radiant Red
49211
Sun Yellow
49212
Mahogany Brown
49213
Aluminum
49218
Flat Black
49219
Flat White
49223
Hunter Green
49231
Gold Metallic
49204
Ruddy Brown
Primer
49205
Gray Primer
49240
Zinc Rich Primer
49233
Silver Gray, 340 g
49242
Charcoal Gray, 340 g
Rust Tough® Aerosols are a rust-preventative acrylic alkyd
enamel that offers state-of-the-art corrosion protection. Rust
Tough™ provides excellent gloss and color retention, superior
durability and one-coat coverage.
K11004041
Gloss White
K11001131
Gloss Black
K11007751
Semi-Gloss Black
K11001201
Flat Black
Iron Guard is a high gloss, 100%
acrylic, waterborne coating for light to
moderate industrial use. Designed for
new construction or maintenance use,
Iron Guard and can be used directly over
prepared substrates, including metal.
K11029101
PART NO. DESC. (5 GAL)
K11018001
Safety Blue (OSHA)
K11044001
Safety Green (OSHA)
K11004991
Safety Orange
(OSHA)
Machinery Dk Gray
(ASA-49)
Safety Red (OSHA)
K11004045
Gloss White
K11001135
Gloss Black
K11007755
Semi-Gloss Black
K11008255
Gray Primer
K11006955
49201
RUST TOUGH® AEROSOLS
PART NO. DESC. (1 GAL)
K11001015
Gloss White
PART NO. DESCRIPTION
KRYLON IRON GUARD®
ACRYLIC ENAMEL
K11006635
49200
Red Primer
K11001011
K11004711
K11004511
Safety Yellow (OSHA)
Safety Red (OSHA)
New Cat Yellow
Old Cat Yellow
K11003271
Machinery Lt Gray
(ASA-61)
K11006631
Machinery Dk Gray
(ASA-49)
K11008251
Gray Primer
K11006951
Red Primer
PART NO. DESCRIPTION
PART NO. DESCRIPTION
R00159
Aluminum
R00799
Gloss Black
R00239
Light Blue
R00839
R00249
Safety Blue (OSHA)
Machinery Lt Gray
(ASA-61)
R00259
Deep Blue
R00879
Machinery Dk Gray
(ASA-49)
R00339
Safety Green (OSHA)
R00909
Flat White
R00349
Bright Green
R00919
Semi-Gloss White
R00379
Dark Green
R00929
Gloss White
R00439
Safety Yellow (OSHA)
R00699
Red Oxide Primer
R00449
Fed. Safety Railing Yellow
R00829
Gray Primer
R00479
Industrial Yellow
R00489
Equipment Yellow
S00740
Zinc, Rich Cold
Galvanizing Compound
R00559
Safety Orange (OSHA)
R00769
Hi-Temp Black
R00569
Equipment Orange
R10339
Fluorescent Green
R00639
Safety Red (OSHA)
R10429
Fluorescent Yellow
R00649
Bright Red
R10559
Fluorescent Orange
R00719
Tan
R10649
Fluorescent Red
R00759
Chestnut Brown
R00779
Semi-Gloss Black
R00789
Flat Black
KRYLON Code: 435
Website: www.krylonindustrial.com
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
K07900000
Clear Gloss
K07904000
OSHA Yellow
K07908000
Gloss Black
K07912000
Satin White
K07901000
Cherry Red
K07905000
OSHA Green
K07909000
Gloss White
K07913000
Satin Black
K07902000
OSHA Red
K07906000
Island Green
K07910000
Flat White
K07914000
Satin Gray
K07903000
OSHA Orange
K07907000
OSHA Blue
K07911000
Max Flat Black
K07915000
Gray Primer
COLORWORKS® MAINTENANCE CHOICE™ ENAMEL
KRYLON® FLUORESCENT PAINTS
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
CWBK00100
Gloss Black
CWBK00115
Cherry Red
43101
Red/Orange
CWBK00101
Flat Black
CWBK00116
Safety Orange
43102
Yellow/Orange
CWBK00102
Gloss White
CWBK00117
Equipment Orange
43104
Lemon Yellow
CWBK00103
Flat White
CWBK00118
Safety Yellow
43105
Cerise
CWBK00104
Light Machinery Gray
CWBK00121
Walnut Brown
43106
Green
CWBK00105
Dark Machinery Gray
CWBK00122
Almond
CWBK00106
Industrial Gray
CWBK00123
Silver Aluminum
CWBK00108
Safety Blue
CWBK00124
Gray Primer
CWBK00109
Royal Blue
CWBK00125
Red Oxide Primer
CWBK00110
Navy Blue
CWBK00126
Sunshine Yellow
CWBK00111
Safety Green
CWBK00127
Harvester Red
CWBK00112
Emerald Green
CWBK00128
Citrus Yellow
CWBK00113
Hunter Green
CWBK00129
Meadow Green
CWBK00114
Safety Red
CWBK00130
New CAT Yellow
WORK DAY™ AEROSOL ENAMELS PAINTS
KRYLON® INDUSTRIAL (5-BALL)
INTERIOR-EXTERIOR PAINT
PART NO. DESCRIPTION
PART NO. DESCRIPTION
K01501
Gloss White
K02016
Emerald Green
Flat White
K02101
Cherry Red
Almond
K02108
Banner Red
Burgundy
PART NO. DESCRIPTION
PART NO. DESCRIPTION
K01502
A04401000
A04413000
K01506
Gloss White
Orange
A04402000
Gloss Black
A04414000
Clear
K01508
Semi-Gloss White
452118000
A04403000
Blue
A04420000
Dark Gray
K01601
Gloss Black
K02411
Pumpkin Orange
A04404000
Gloss Red
A04422000
Flat White
K01602
Ultra-Flat Black
K02501
Leather Brown
Shadow Gray
Gray
A04431000
Brown
K01606
Pewter
A04406000
Yellow
A04437000
Oyster White
K01608
Smoke Gray
K01605
Stone Gray
A04407000
Gloss Pink
A04456000
True Blue
K01613
Semi-Flat Black
K01813
Daisy Yellow
Sun Yellow
K01910
True Blue (OSHA)
Regal Blue
K02504
Khaki
K01913
Purple
K01301
Crystal Clear
K02001
Hunter Green
A04408000
Green
A04457000
Aluminum
K01806
A04409000
Sky Blue
A04418000
Gray Primer
K01901
Gold
A04412000
Flat Black
A04419000
Red Primer
KRYLON
A04405000
K01604
A04410000
PAINT
KRYLON® INDUSTRIAL ECO-GUARD® LATEX SPRAY PAINT
170
KRYLON Code: 435
Website: www.krylonindustrial.com
PAINT
TOUGH COAT® ACRYLIC
ALKYD ENAMELS
A variety of enamel paints are available. Please
inquire for the part numbers for any of the
following categories:
• Acrylic Alkyd Enamels
• Fluorescent and I.D. Fluorescent
• Primers
• Appliance Epoxies
• Rebar Green Epoxy
• High Heat Paints
PART NO. DESCRIPTION
PART NO. DESCRIPTION
S00325
Machinery Dk Gray (ASA-49)
S01415
Machine Green
S00326
Machinery Lt Gray (ASA-61)
S01445
Medium Green
S00329
Machinery Blue Gray (ASA-24)
S01470
OSHA Green
S01000
Clear Gloss Topcoat (TTL-50)
S01485
S01003
Intl Harvester Red
Ivy Green (John Deere & Case
Green)
S01005
Bright Red
S01510
OSHA Blue
S01006
Allis Chalmers Orange
S01515
Dark Blue
S01540
Light Blue
S01580
OSHA Purple
S01615
Medium Gray
S01620
Machinery Gray
S01625
Blue/Gray
S01630
Industrial Gray
S01645
Light Gray
S01008
Ford Blue
S01009
Federal Highway Yellow
S01101
Cherry Red
S01110
OSHA Red
S01150
Zinger Pink
S01210
OSHA Orange (#60 Equipment
Orange)
S01212
Implement Orange
S01760
Aluminum
S01213
Joy Orange
S01765
Gold
S01285
Cordova Brown
S01770
OSHA Black
S01305
Light Beige
S01800
OSHA White
S01310
OSHA Yellow
S03720
Flat White
S01319000
New Cat Yellow
S03725
Semi-Flat Black
S01321000
Old Cat Yellow
S03727
Max Flat Black
JIFFCO INTERNATIONAL Code: 650
Website: www.jiffco.net
LONG NIB MARKER
PART NO. DESCRIPTION
2 - 5 MM COLOUR
7.5 - 12 MM COLOUR
EK710-1
1.0 mm black
JK90-1
Black
JK100-1
Black
EK710-3
1.0 mm blue
JK90-2
Red
JK100-2
Red
JK90-3
Blue
JK100-3
Blue
JK90-4
Green
JK100-4
Green
PAINT MARKER
PART NO. DESCRIPTION
KRYLON
N / JIFFCO
EK440-10
1.2 mm white
EK440-7
1.2 mm yellow
EK444-7
0.8 mm yellow
EK400-1
2.3 mm black
EK400-10
ECO MARKER
PART NO. DESCRIPTION
JK70-1
1.5 mm black
JK70-2
1.5 mm red
JK70-3
1.5 mm blue
JK70-4
1.5 mm green
WETRITE MARKER
PART NO. DESCRIPTION
EK47-1
1.5 mm black bulk
EK47/1B-1
1.5 mm black card
EK400-2
2.3 mm red
.(1K14781:F8G/77:2F86/87
EK400-3
2.3 mm blue
KEY TAGS
EK400-4
2.3 mm green
EK400-6
2.3 mm orange
EK400-7
171
2.3 mm white
ECO MARKER CHISEL
2.3 mm yellow
"
BLUE STEEL MARKER,
CHISEL, 4 - 6 MM
PART NO. DESCRIPTION
ID5PP4
4 pack
ID5PP10
10 pack
ID30AC50
50 per box
KEYTAG RACK
• Kevron mountable rack
with eight keytags
DUPLI-COLOR & VHT
Website: www.duplicolor.com
Code: 435
Website: www.vhtpaint.com
DUPLI-COLOR® GENERAL DUPLI-COLOR® SPECIALTY
PURPOSE ENAMELS
PRIMERS
Specialty primers to do the job right.
PART NO. DESC.
PART NO. DESCRIPTION
CDA1600
CDAP1699
Gray Primer
Sealer
CDAP1690
Green Self
Etching Primer
CFP101
Gray Scratch
Filler & Primer
CFP102
Red Scratch
Filler & Primer
CCP199
Clear Primer
Adhesion
Promoter
CRF129
Black Rust
Fix® Rust
Treatment
Gloss Black (OSHA)
CDA1603
Semi-Gloss Black
CDA1605
Flat Black
CDA1610
Medium Gray
CDA1612
Machinery Gray
CDA1620
Royal Blue
CDA1630
Leaf Green
CDA1640
Cherry Red (Equip Red)
CDA1663
School Bus Yellow
CDA1670
Gloss White (OSHA)
CDA1672
Flat White
VHT® FLAMEPROOF™
CDA1684
Chrome Aluminum
CDA1692
Crystal Clear
• VHT® Flameproof™ is a unique silicone-base
coating that is widely used in the automotive and
aerospace industry for jet engines, the Stealth
Fighter, B-2 bomber and other high temperature
applications
• Withstands temperatures up to 1,093ºC (2,000ºF)
• Available in many popular colors
DUPLI-COLOR®
UNDERCOAT
• Dupli-Color® Undercoat
protects metal surfaces from
corrosion and moisture
• Dries to black
• Paintable
PART NO. DESC.
CUC101
Protective paintable rubberized undercoating
CUC102
Professional undercoat
with sound eliminator
DUPLI-COLOR®
GENERAL
PURPOSE LACQUERS
Dupli-Color lacquer is a fast-drying,
premium formula that provides quick coverage,
weatherability and adhesion.
PART NO. DESC.
CDAL1607
Flat Black
CDAL1608
Semi-Gloss
Black
CDAL1675
Gloss White
CDAL1677
Gloss Black
CDAL1679
Silver Metallic
CDAL1695
Clear
DUPLI-COLOR®
HI BUILD
Get superior coverage and durability for
fleets with this high solids enamel paint.
PART NO. DESC.
CHB100
Gray primer
PART NO. DESC.
CHB101
Gloss black
CSP100
Gray Primer
CHB102
CSP101
Flat White
Semi-gloss
black
CSP102
Flat Black
CHB104
Fleet white
CSP106
Flat Silver
CHB105
Fleet red
CSP109
Flat Red
CHB109
Stainless steel
CSP114
Flat Orange
CSP115
Clear (Satin
Finish)
CSP117
Flat Aluminum
CSP998
Nu-Cast™
Cast Iron
DUPLI-COLOR®
SANDABLE PRIMERS
Fast-drying sandable formula provides a smooth
rust resistant base coat that improves adhesion and
appearance of the finish top coat.
CTR250
Aerosol can
CTRQ250
Quart
DUPLI-COLOR® TRUCK BED COATING
CTRG250
Gallon
Dupli-Color® Truck Bed Coating is a durable non-skid coating with a
unique black vinyl polymer that can be applied using a roller, spray
gun or by aerosol spray can.
CTRG103
Roller kit
CTRC104
Replacement roller cover
Rust Resistant
Primer
CDAP1689
White Primer
CDAP1692
Gray Hot Rod
Primer
CDAP1694
Red Oxide
Primer
CDAP1698
Black Hot Rod
Primer
CDAP1691
Zinc Chromate
Primer
DUPLI-COLO
OR & VHT
PART NO. DESC.
CDAP1687
PART NO. DESCRIPTION
PAINT
Dupli-Color acrylic enamels deliver the
ultimate in protection, gloss and color
retention. A superior, high-solids formula
ensures maximum coverage and
performance.
172
CRC CANADA CO. Code: 305
Website & Online Catalogue: www.crc-canada.ca
CHEMICALS AND LUBRICANTS
GLASS CLEANER 500 G
STAINLESS STEEL
CLEANER & POLISH 510 G
BATTERY CLEANER 312 G
PHASEGUARD 4 ULTIMATE ETHANOL
FUEL TREATMENT
237 ML
BUG BLAST WASP &
HORNET KILLER 397 G
POWER LUBE MULTI PURPOSE
LUBRICANT 312 G
TECHNICIAN GRADE
DI-ELECTRIC GREASE 94 G
PHASEGUARD 4 STOR & GO SMALL
ENGINE FORMULA
MINIMAL EXPANSION
FOAM 340 G
BATTERY TERMINAL
PROTECTOR 213 G
HEAVY DUTY
SILICONE 213 G
CR
RC
173
PHASEGUARD
4 -ULTIMATE
ETHANOL FUEL
TREATMENT
474 ML
MOLY GRAPH
EXTREME PRESSURE
GREASE 397 G CARTRIDGE
BEARING GREASE
397 G CARTRIDGE
SYNTHETIC BRAKE &
CALIPER GREASE 340G
TUB WITH BRUSH
SYNTHETIC BRAKE &
CALIPER GREASE 227 G
BRUSH TOP BOTTLE
STA-PLEX EXTREME
PRESSURE PREMIUM RED
GREASE 397 G
CARTRIDGE
DRY GRAPHITE
LUBRICANT 320 G
LITHIUM
GENERAL
PURPOSE
GREASE 397 G
CRC CANADA CO. Code: 305
Website & Online Catalogue: www.crc-canada.ca
QD ELECTRONIC
CLEANER 312 G
HYDROFORCE CITRUS
HD DEGREASER 425 G
AIR TOOL OIL
444 ML
HYDROFORCE
DISINFECTANT SURFACE
CLEANER 539 G
UNIVERSAL 2 CYCLE
OIL 946 ML
UNIVERSAL 2 CYCLE
OIL 444 ML
AIR TOOL OIL
3.785 L
HYDRAULIC OIL
3.785 L
COMPRESSOR OIL
3.785 L
KOOL TAP AQUA
CUTTING FLUID 473 ML
CHEMICALS AND LUBRICANTS
QD ELECTRONIC
CLEANER 127 G
KOOL TAP AL
CUTTING FLUID 473 ML
KOOL TAP EP
CUTTING FLUID 473 ML
KOOL TAP FOAMY
CUTTING FLUID 369 G
RAPID DRY BRAKLEEN
PREMIUM NON
CHLORINATED
19 L PAIL
BRAKLEEN
CHLORINATED 539 G
BRAKLEEN NON
CHLORINATED WITH
POWERJET 397 G
CR
RC
BRAKLEEN NON
CHLORINATED 397 G
BRAKLEEN
CHLORINATED
19 L PAIL
174
AGS COMPANY Code: 914
Website: www.agscompany.com
Online Catalogue: www.agscompany.com/marketing/catalogs
AIR COMPRESSOR OIL
CHEMICALS AND LUBRICANTS
AIR TOOL ANTI-FREEZE
OIL LUBRICANT
FOR INDUSTRIAL USE
• Absorbs moisture to protect
against rust and corrosion
• Prevents freeze-ups
• Frees stuck or frozen tools
SIL-GLYDE®
LUBRICATING COMPOUND
MULTI-PURPOSE ALL-WEATHER
• Effective on rubber, metal, wood, glass, and plastic
• Prevents rust and sticking
• Won’t melt, freeze, gum, or run off
PART NO. DESCRIPTION
PART NO. DESCRIPTION
SG-2
42 g Tube
AC-12
355 ml Bottle
SG-4
113 g Tube
PART NO. DESCRIPTION
AC-17
946 ml Bottle
SG-8
227 g Tube
ATA-12
AC-18
3.78 L Bottle
AC-20
18.925 L Pail
355 ml Bottle
QUICK-LIFT SNOW PLOW
HEAVY-DUTY HYDRAULIC FLUID
• Anti-wear additives to protect
metal components of
high-pressure systems
• Anti-freeze additives for
superior performance
LOCK DE-ICER
THAWS FROZEN LOCKS
AND KEEPS THEM WORKING
• Lubricates internal
lock mechanisms
• Protects against rust
• Not harmful to automotive paint finishes
DOOR-EASE® STICK
LUBRICANT
MAKES THINGS SLIP AND SLIDE
• Stops squeaking and sticking
• Weatherproof and protect
• Safe on metal, wood, glass,
plastic, or rubber
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
QL-17
946 ml Bottle
MZC-1
15 ml Carded Tube
DEC-3
47.6 g Stick
QL-18
3.78 L Bottle
MZ-1H
0.5 oz Carded Tube
DKC-3
47.6 g Carded
LE-1
1 oz Bottle
DEK-3H
1.6 oz Carded
AIR TOOL OIL
EXTEND SERVICE LIFE AND IMPROVE PERFORMANCE
• Absorbs moisture to protect against rust and corrosion
• Ensures smoother starting by dissolving gum
and sludge
PART NO. DESCRIPTION
ATC-4
100 ml Bottle
ATC-12
355 ml Bottle
ATC-17
946 ml Bottle
SIL-GLYDE® BRAKE LUBRICANT
USE ON DISC AND REGULAR BRAKES
• Stops squeaking and slide sticking
• Ease the rebuilding of rubber o-rings and grommets
• Seals boots against moisture
AGS COMPAN
NY
175
NON-DETERGENT SAE 30W
• Lubricate and protect
• For ambient temperatures
of 25°F to 120°F
• Top-off or replace other
quality non-detergent
compressor oils
PART NO. DESCRIPTION
BK-4
113 g Tube
BK-8
227 g Tube
BK-12
341 g Tub
LITH-EASE®
WHITE LITHIUM GREASE
MULTI-PURPOSE ALL-WEATHER LUBRICANT
nd
• Long-lasting with excellent water and
heat resistance, rust and corrosion
protection, and high film strength
• Won’t melt, freeze, gum, or run off
ANNEALED
COPPER
TUBING COIL
• Low pressure applications
–not brake lines
PART NO. DESCRIPTION
CT-225
1/8" OD x 25'
PART NO. DESCRIPTION
CT-325
3/16" OD x 25'
WLC-1
36 g Carded Tube
CT-425
1/4" OD x 25'
WL-8
227 g Tube
CT-525
5/16" OD x 25'
WL-14
411 g Cartridge
CT-625
3/8" OD x 25'
WLC-16
291 g Aerosol
CT-725
1/2" OD x 25'
LOCK-EASE®
GRAPHITED LOCK FLUID
DIELECTRIC SILICONE
COMPOUND
PROTECT AGAINST STICKING,
RUST AND FREEZING
• Works on all types of locks
• Will not run in hottest climates or
harden at sub-zero temps
• Seal out moisture from working parts
WEATHERPROOF ELECTRICAL CONNECTIONS
• Protects against air, dirt, moisture, and corrosion
• Prevent arcing and voltage loss
• Seal out moisture from working parts
PART NO. DESCRIPTION
PTION
PART NO. DESCRIPTION
DS-1
36 g Cardedd
LEC-4
100 ml Bottle
DS-4
113 g
LEC-5
85 g Aerosol
COLD FIRE CANADA LTD® Code: 383
Website & Online Catalogue: www.coldfirecanada.com
,
COLD FIRE
MOTOR MAX
• Fire extinguishing agent
(extinguishes on contact)
• Biodegradable
(does not harm the environment)
• Removes extreme heat from all
objects it comes in contact with
• Puts fires out rapidly
• Reduces hydrocarbon smoke
• Spray in any direction and upside
down for hard to reach places
• Convenient to use in cars, homes,
boats, motor homes, etc.
• Cooling system additive
• Extends the life of the
engine and cuts down
on maintenance
• Dramatically improves
engine performance
and fuel consumption
• Non-toxic and
biodegradable
• Non-corrosive and
compatible with all
internal engine parts,
seals, hoses and
accessory components
All Products are 100% Environmentally Friendly and Completely Non-Toxic.
+
$
ODOR SEAL
FIRE BLOCK
• Odor eliminator (without the
use of masking agents or
perfumes)
• Naturally destroys odors by
encapsulating the odor
producing source
• Non-corrosive
• Non-flammable
• Biodegradable
• Fire Retardant
• Non-toxic
• Forms its own thermal
insulation barrier
• Does not stain
• Used to fire retard wood,
furnishings, carpeting,
uniforms, motor home
interiors, etc.
CHEMICALS AND LUBRICANTS
$"
176
WD-40 Code: 980
Website: www.wd40.com
CHEMICALS AND LUBRICANTS
WD-440
177
WD-40
• A size and application for all your needs
• Protects metal from rust and corrosion
• Penetrates stuck parts, displaces moisture, and
lubricates just about anything
• Cleans grease, grime, and other marks from
most surfaces
• More than 2000 uses
PART NO. DESCRIPTION
01005
155 g Convenience Can
01011
311 g Classic Can
1103
411 g Industrial Value Size
01144
311 g Big Blast Wide Spray
01053
325 g Smart Straw
01010
3.785 L Bulk Liquid
01000
Spray Applicator
WD-40
SPECIALIST
RUST RELEASE
PENETRANT
311 G
WD-40
SPECIALIST
WATER
RESISTANT
SILICONE
LUBRICANT
311 G
WD-40
SPECIALIST
WHITE
LITHIUM
GREASE
283 G
• Frees corroded
nuts and bolts
• Penetrates rust
• Fast acting
• Features Blu
Torch Technology
• Waterproofs and
protects
• Quick drying with
no messy residue
• Safe on metal, rubber,
vinyl and plastic
• Long lasting,
lubricating coating
• Won’t freeze, melt
or run off
• Rust inhibiting barrier
3-IN-ONE, 2000 FLUSHES & SPOT SHOT Code: 980
Websites: www.3inone.com, www.2000flushesbrand.com, www.spotshot.com
A trusted brand.
PART NO. DESCRIPTION
01035
88.7 ml All Purpose Oil
01038
236 ml All Purpose Oil
01045
88.7 ml Motor Oil
01034
118 ml 6-3/4" Telescoping Spout
3-IN-ONE PROFESSIONAL
Specialized lubricants targeted for specific applications.
PART NO. DESCRIPTION
01040
311 g High Performance Penetrant
01041
311 g Silicone Lubricant
01042
290 g White Lithium Grease
01043
311 g Garage Door Lube
2000 FLUSHES
• Keeps commercial and residential toilet bowls
clean for 4 months
• Cleans with every flush
• Ranked #1 in automatic toilet bowl pucks
SPOT SHOT CARPET CLEANER
• Ranked # 1 for Efficacy in the Aerosol Category
• Green Formula - Non-Toxic and Biodegradable
PART NO. DESCRIPTION
PART NO. DESCRIPTION
90102
Blue Plus Detergent
00914
650 ml Trigger
90615
Antibacterial Chlorine Clear
00918
Spot Shot 650 ml Pet Green
90801
Antibacterial Blue plus Bleach
00986
397 g Aerosol
3-IIN-O
ONE, 2000 FLLUSHES & SP
POT SHO
OT
CHEMICALS AND LUBRICANTS
3-IN-ONE OIL
178
ARMORED AUTOGROUP Code: 801
Website: www.armoredautogroup.com
CHEMICALS AND LUBRICANTS
ARMOR ALL® AIR FRESHENER - VENTS
ARMOR ALL® AIR FRESHENER
HENER - CARDS
New Armor All Vent Air Fresheners Include:
• Discreet black casing
• Scratch & sniff sticker on package
• Advanced anti-leak technology
• Adjustable scent strength control
New Armor All Air Fresheners Include:
• 3 air fresheners per pack
• Scratch & sniff sticker on package
PART NO. DESCRIPTION
PART NO. DESCRIPTION
11201
Cool Mist
11203
New Car
11202
Mountain Air
11205
Wild Berry
ARMOR ALL® SCENTED PROTECTANT
• New Armor All Scented Protectant is available
in both spray and wipes format
• Prevents cracking, fading, discoloration and aging
• Freshens the air inside your vehicle
• Long lasting scent lasts 4 -6 hours
11301
Cool Mist
11303
New Car
11302
Mountain Air
11305
Wild Berry
PART NO. DESCRIPTION
11076
Cool Mist Spray, 473 ml
11077
Mountain Air Spray, 473 ml
11074
Cool Mist Wipes, 25 ct
11075
Mountain Air Wipes, 25 ct
ARMOR ALL® CLEANING
• Helps remove the toughest automotive dirt and grime
PART NO. DESCRIPTION
10869
Cleaning Wipes, 25 ct Canister
10925
Orange Wipes, 25 ct Canister
11068
Multi Purpose Cleaner, 473 ml
ARMOR ALL® PROTECTANTS
• Helps prevent cracking, fading, discoloration and aging
• Cleans away dirt, dust and debris
ARMOR ALL® CAR WASH
PART NO. DESCRIPTION
• Cleans the toughest automotive dirt and grime
• Clean-rinsing formula for spot-free, streak-free results
78021
PART NO. DESCRIPTION
AR
RMORED AUTTOGROU
UP
179
25101
715 ml
25102
1.89 L
Original Protectant, 473 ml
10125
Original Protectant, 118 ml
11300
Original Protectant, 300 ml
10859
Protectant Wipes Canister, 25 ct
12035
Original Protectant Refill, 1.89 L
ARMOR ALL® NATURAL
FINISH DETAILER
PROTECTANT WIPES
ARMOR ALL®
GLASS WIPES
ARMOR ALL®
TIRE FOAM
567 G
ARMOR ALL®
LEATHER
WIPES
• Just spray and
walk away!
• Helps protect
fading and cracking
• Deep black look
• Cleans, conditions
and helps protect
fine leather for that
lasting, luxurious
look
• NEW Matte finish detailing wipes
with non-greasy formula
• Protects against cracking, fading
discoloration and aging
• Ideal where minimal shine is desired
• 25 ct per canister
• Crystal clear
streak-free shine
• Easily removes filmy
residue, road grime,
bugs and more
• Ammonia-free
• 25 ct per canister
ARMORED AUTOGROUP Code: 801
Website: www.armoredautogroup.com
STP® FUEL SYSTEM
CLEANER ETHANOL
155 ML
STP® OCTANE
BOOSTER
155 ML
• Removes ethanol fuel
system deposits
• Cleans fuel injectors and
intake deposits
• Protects against the harmful
effects of alcohol combustion
• Works with both ethanol
enriched gasoline and
traditional gasoline
•
•
•
•
• Unclogs dirty fuel injectors
• Restores fuel economy and lost
power, while lowering emissions
• Formulated for high mileage
vehicles (120,000 km and over)
Boosts fuel octane
Cleans fuel system
Prevents hard starts
Fights knock and ping
STP® HIGH MILEAGE RADIATOR
STOP LEAK 325 ML
STP® FUEL INJECTOR &
CARBURETOR CLEANER
155 ML
• Seals leaks in radiator, freeze plug and gasket
• Conditions the cooling system and protects
against coolant loss
• Compatible with water, cooling fluids and anti-freeze
• Does not harm rubber, metal hoses and gaskets
• Works in plastic, metal and aluminum radiators
• Formulated for high mileage vehicles
(120,000 km and over)
• Maintains clean performance of fuel
injectors and carbs
• Helps save gas
• Prevents power loss
• Reduces friction in the engine
STP® MULTIPURPOSE
MOTOR TREATMENT 473 ML
STP® WATER
REMOVER 155 ML
• Multi-functional fuel and oil additive that works
in the fuel system, crankcase and intake
• Stabilizes fuel and removes moisture from gas
• Restores engine performance by removing
carbon build-up and deposits
• Works in cars, trucks and a variety of 2 & 4
cycle engines
• Fights fuel line freeze and corrosion
• Inhibits corrosion and rust without
harmful alcohol
• Keeps fuel injectors clean
STP® HIGH MILEAGE
OIL TREATMENT
443 ML
• Rejuvenates seals and gaskets
• Stops engine leak, noise and smoking
• Formulated for high mileage vehicles
(120,000 km and over)
• Contains anti-wear agent zinc phosphate
• Fights metal-to-metal friction
by providing a thicker cushion
between moving engine parts
• Prevents power loss
• Protects engine against wear
AR
RMORED AUTTOGROU
UP
STP® OIL
TREATMENT
400 ML
CHEMICALS AND LUBRICANTS
STP® HIGH
MILEAGE FUEL
INJECTOR CLEANER
155 ML
180
LOCTITE Code: 123
Website: www.henkelna.com
CHEMICALS AND LUBRICANTS
LOCTITE®
THREADLOCKER 262™
HIGH STRENGTH
• High strength locking, up to 3/4" bolts
• Withstands heavy shock and vibration,
or extreme chemical or environmental
conditions such as solvents, oils or
water immersion
LOCTITE®
THREADLOCKER 243™
MEDIUM STRENGTH
• Versatile medium strength
liquid that tolerates thread
lubrication, anti-corrosion
and protection fluids
• Works on steel, stainless
steel, and most plated
fasteners
PART NO. DESCRIPTION
PART NO. DESCRIPTION
1330902
6 ml tube
38637
6 ml tube
1330906
36 ml tube
38647
36 ml tube
LOCTITE® BLUE
THREADLOCKER STICK MEDIUM STRENGTH
LOCTITE® RED
THREADLOCKER STICKHIGH STRENGTH
• Medium strength anaerobic threadlocking
material supplied as a wax-like semi-solid
• Suited for applications where a liquid
product may be too difficult to apply
• Semi-solid stick form is portable and
less messy, prevents loosening of
threaded fasteners
• Well suited for heavy duty applications
PART NO. DESCRIPTION
PART NO. DESCRIPTION
38132
9 g stick
38136
9 g stick
38131
19 g stick
38134
19 g stick
592™ PST®
THREAD SEALANT,
50 ML
LOCTITE® PST®
NT
THREAD SEALANT
STICK HIGH
PERFORMANCE
LOCTITE®
BELT DRESSING
& CONDITIONER
• High temperature formulation
suitable to 200ºC/400ºF
• Non-shrinking, non-cracking
• Slow curing product works well
on large assemblies requiring
repositioning
• 72 hour adjustability feature, works
well on large parts
• 19 g stick
• Single component,
semi-solid anaerobic pipe
sealant compound
evelops
• Industrial grade sealant develops
controlled low strength to
facilitate disassembly
• 12 oz aerosol
• High quality belt dressing
designed to eliminate
squeaks, aid in power
transfer and increase
belt life
• Prevents belt slippage due
to heat, cold, dampness,
dust and glazing
FREEZE & RELEASE, 400 ML
EXTEND® RUST TREATMENT
• Exceptional shock-freeze action causes
microscopic cracks in the layer of rust, allowing
the lubricating ingredient to wick directly into
the rust by capillary action
• Instantly chills seized and rusted parts
(bolts, nuts, studs) down to –45ºF
Loctite® Extend® Rust Treatment converts existing rust into a stable base ready for
painting. Protects surfaces from corrosion and can be used on metal pipes, valves,
fittings, storage tanks, fences, guard rails, conveyors, construction and agricultural
equipment. ABS Approved.
PART NO. DESCRIPTION
LOCTITTE
181
30539
10.25 oz aerosol
75430
1 qt bottle
75448
1 gallon bottle
75465
5 gallon pail
LOCTITE Code: 123
Website: www.henkelna.com
LOCTITE® RTV 598™
BLACK SILICONE HIGH
PERFORMANCE
• High flexibility form in place silicone
gasket maker
• Sensor-safe, non-corrosive, low odour
• Temperature resistant to 260ºC / 500ºF
(intermittent)
• Excellent hot oil resistance
• High flexibility form in place silicone
gasket maker
• Temperature resistant to 330ºC/625ºF
(intermittent)
• Excellent hot oil resistance
• Sensor safe, non-corrosive, low odour
PART NO. DESCRIPTION
PART NO. DESCRIPTION
38616
80 ml tube
41240
300 ml tube
38634
300 ml cartridge
41241
80 ml tube
LOCTITE® SILVER
GRADE ANTI-SEIZE
LOCTITE® C5-A®
COPPER ANTI-SEIZE
LOCTITE® MARINE
GRADE ANTI-SEIZE
PART NO. DESCRIPTION
PART NO. DESCRIPTION
PART NO. DESCRIPTION
38619
8 oz brush top
38605
8 oz brush top
34395
8 oz brush top
38620
1 lb brush top
38604
1 lb brush top
34026
16 oz brush top
38138
20 g stick
38137
20 g stick
SILATECH™
INDUSTRIAL GRADE SILICONE
•
•
•
•
•
•
•
•
Provides a tough, flexible, waterproof, oil-resistant seal
Superior adhesion and flexibility
Re-sealable nozzle
Tack-free in 45 minutes / full cure in 24 hours
Non-flammable, non-toxic
Bonds and seals metals, wood, plastic, glass
Seals ductwork, vents, flues, doors, windows
Insulates and seals electrical wires and terminals
CHEMICALS AND LUBRICANTS
LOCTITE®
RTV 587™ BLUE SILICONE
HIGH PERFORMANCE
VIPERLUBE™
HIGH PERFORMANCE
SYNTHETIC GREASE
• Designed as a long-life lubricant
to provide superior protection in
industrial applications
• May be used on food processing
equipment as a protective anti-rust
film, as a release agent on gaskets
or seals, and as a lubricant for
machine parts and equipment
PART NO. DESCRIPTION
32394
300 ml cartridge, red
36781
3 oz tube
32389
300 ml cartridge, clear
36782
14.1 oz cartridge
32390
300 ml cartridge, black
32391
300 ml cartridge, white
32392
300 ml cartridge, aluminum
LOCTITTE
PART NO. DESCRIPTION
182
LOCTITE Code: 123
Website: www.henkelna.com
CHEMICALS AND LUBRICANTS
LOCTITE® CHISEL®
PAINT STRIPPER
LOCTITE®
READY GASKET
GASKET MAKER
• Resists aging, weathering and thermal
cycling without hardening, shrinking
or cracking
• Typically used in applications with an
operating range of -60°C to 232°C
PART NO. DESCRIPTION
1093354
5 oz cartridge
40480
190 ml power can
LOCTITE®
PRO STRENGTH
PARTS CLEANER
• 19 oz Aerosol
• Designed to aggressively
penetrate, dissolve and
remove contaminants
from all types of metal
assemblies
• Has no ozone-depleting
solvents and leaves
no residue
NATURAL BLUE®
CLEANER & DEGREASER
LOCTITE®
INDUSTRIAL HAND WIPES
Biodegradable, all-purpose, industrial strength
concentrated cleaner and degreaser. Can be
diluted with water and formulated for wipe
down and pressure spraying.
• Non-flammable
• Non-toxic
• Contains no ODCs
Pre-moistened with a powerful citrus scented
formula. Quick and easy to use. No rinsing,
drying or residue left behind.
• 9.5" x 12"
• 75 count canister
Perfect for industries such as:
• Painting
• Printing
• Maintenance
• Transportation
• Construction
PART NO. DESCRIPTION
82249
24 fl oz spray bottle
82251
1 gallon bottle
82253
5 gallon pail
LOCWELD®
BONDING
COMPOUND
COLD WELD
• 2 x 1 oz tubes
• Sets up in 15
minutes and has
a test proven
strength greater
than 3,000 psi
• Can withstand heat
up to 300°F (149°C)
LOCTITTE
183
• Chemical liquid that lifts off: baked-on
gaskets, gasket cements, carbon
deposits, dried oil, grease and paint
• Ideal for removing high temperature
engine paints prior to repainting
• Removes gaskets from any type of
assembly in 10 to 15 minutes
• Prepares metal parts for new gaskets,
eliminating scraping and sanding
• Works on wood; non-corrosive on
aluminum. Not for use on plastics,
linoleum, or synthetic fibers
• CFIA approved
LOCTITE® 404™
QUICK SET™
INSTANT ADHESIVE
• General purpose instant adhesive
• A must for every toolbox for general
maintenance and repair
• Sets instantly
• No mixing, no waiting
• Bond just about anything instantly
PART NO. DESCRIPTION
46551
1/3 oz bottle
46548
4 oz bottle
QUICKTAPE™ 249™
Loctite® QuickTape™ 249™
Threadlocking Tape
• The first and only
Threadlocker in a tape form
• Can be pre-applied on bolts
for up to 30 days
• Same reliability and
performance as threadlocking
liquids
• A MUST for every toolbox
MEGUIAR’S CODE: 602
Website: www.meguiarscanada.com
&
HOT RIMS® ALL WHEEL® CLEANER
NXT GENERATION®
TECH WAX® 2.0
Hot Rims® All Wheel® Cleaner. Achieve a "Show Perfect" shine
on all factory wheel surfaces! The name says it all! Hot Rims® All
Wheel Cleaner® is unlike any formula in the world for removing
grime, grit and brake dust from all factory wheel surfaces. Remove
stubborn road residue with Hot Rims’ unique foaming agents. Our
Xtreme Cling™ foam is designed to cling to vertical surfaces and
break down stubborn road residue between your wheels for a brilliant shine! Safe for all factory, clear-coated and painted wheels.
NXT Generation® Tech Wax® 2.0 is a scientific
breakthrough that introduces a new dimension of gloss
and protection. This improved formula produces unbelievably
deep, vibrant color and a dramatically clear wet-look. New
Hydrophobic Polymer Technology™ provides relentless water
beading and protection against oxidation, corrosion, UV rays
and surface degradation. "Hydrophobic" means "water-fearing"
and this new breakthrough technology builds such incredible
protection and surface tension that water beads up and just
glides off your paint finish, wash after wash!
&
HOT SHINE HIGH
GLOSS TIRE SPRAY
(TRIGGER)
&
DEEP CRYSTAL®
CAR WASH
Hot Shine’s™ high gloss formula gives
your tires a "wet-look" with a dark shine.
By combining highly water-resistant
polymers with antiozonant technology,
Hot Shine keeps your tires looking
blacker longer while preventing cracking, browning and premature aging.
Deep Crystal® Car Wash
contains special ingredients
that extend the life of the suds.
Dirt and grime are quickly
loosened and removed while
wax protection is preserved.
&
&
ULTIMATE QUIK
DETAILER™
Our most sophisticated,
technologically advanced detailer.
Safely removes dust and surface
contaminants in-between washing.
Hydrophobic Polymer Technology
darkens the finish, adding
protection and water beading.
ONE STEP-HEADLIGHT
RESTORATION KIT
Meguiar’s® Headlight and Clear Plastic Restoration
Kit restores like-new clarity to cloudy, scratched,
oxidized and yellowed, uncoated plastic surfaces.
The unique PlastX formula works in concert with
our unique buffing pad and your drill to safely
deliver amazing results in just minutes! No
extra steps, complicated solutions or sanding
with abrasives that can damage plastic and
surrounding paint and trim. This Restoration
Kit effectively removes fine scratches, surface
contaminants, oxidation, cloudiness and yellowing,
leaving plastics brilliantly clear and polished
from headlights, brake lights, plastic convertible
windows, motorcycle windscreens, helmet face
shields, boat windows and more!
&
SCRATCHX® 2.0
Keep ScratchX® 2.0 close at hand
for quick removal of isolated paint
scratches or blemishes… whenever
they occur. Competitive products
either hide the blemish or scratch
the finish. Meguiar’s® exclusive
micro-abrasive system enables
ScratchX® 2.0 to remove paint
blemishes fast while restoring
brilliant high gloss. The new and
improved formula can be applied by
hand or with a Dual Action Polisher.
&
&!
GOLD CLASS™ RICH LEATHER
CLEANER/CONDITIONER
DUAL ACTION POLISHER
Low risk, dual-action, rotation and orbit pattern produces far superior results than
mere hand application
• New upgraded v2 with cruise control
• Internal feedback circuit increases
torque when downward pressure
is applied
• 1,800 opm – 6,800 opm, the most
versatile speed range in it’s class
• Easy side-port access for quick
brush changes
• New rubber cord
• Convenient Meguiar’s® canvas bag
• Includes W68DA soft buff 2.0 DA backing plate
MEEGUIAR
R’S
CLEANS, CONDITIONS & PROTECTS FINE LEATHER
Quickly and easily pamper and protect your leather with Meguiar’s®
Gold Class™ Rich Leather Cleaner/Conditioner. The gentle, effective
formula cleans, restores and enriches leather for a luxurious
appearance and helps to prevent premature wear, such as
drying and fading. Formula lifts off dirt and grime without
scratching while enhancing gloss without build up.
Details a full sized car in less than 15 minutes!
• Cleaners remove dirt and grime
• Premium conditioners and aloe nourish
leather for a supple feel and look
• UV protection to help prevent aging and fading
CHEMICALS AND LUBRICANTS
&
184
FPPF Code: 860
Website: www.fppf.com
CHEMICALS AND LUBRICANTS
POLAR POWER,
32 OZ
TOTAL POWER,
32 OZ
• Contains Fuel Power
• Significantly lowers pour
point and cold filter plug
point
• Dissolves ice crystals
in fuel
• Contains lubricity
improvers, wax dispersant
and wax seed crystal
modifiers
• Contains no harmful
alcohols
• Contains Fuel Power, antigel and cleaner detergent
• Cleans injectors
• Meets L-10 and N-14
• Contains lubricity
improvers, wax dispersant
and wax seed crystal
modifiers
• Lowers CFPP and
significantly lowers pour
point
• Contains no harmful
alcohols
• Increases cetane
PREMIUM
TRUCK WASH
LUBRICITY PLUS
FUEL POWER
LIQUID MUSCLE
• Highly concentrated formula/
biodegradable
• Removes all road film and grease
• Rinses quickly and does not
water spot
• Can be used with all washing
systems
• Superior cleaning results. Safe
for use on all painted, fiberglassreinforced plastic, aluminum and
stainless steel finishes and will not
harm rubber, glass or plastic
• Contains Fuel Power
• Superior lubricity
enhancing formula
• Exceeds all B.O.C.L.E.
standards
• Helps prevent rotary and
piston fuel pump wear
• Increases cetane
• Reduces pintle scoring
• Contains no harmful
alcohols
• Improves engine starting
MELT DOWN, 32 OZ
• Dissolves gelled fuel
• Will not harm pre-combustion
components or fuel pump
injectors
• Compatible with all types of fuel
• Gets fuel flowing in 15 to 20
minutes
PART NO. DESCRIPTION
00421
32 oz bottle
00233
1 gal bottle
PART NO. DESCRIPTION
00361
00362P
5 gallon
PART NO. DESCRIPTION
00223
32 oz bottle
00401
1 gal bottle
PART NO. DESCRIPTION
50099
32 oz bottle
50224
64 oz bottle
FUEL POWER
DIESEL FUEL
INJECTION
CLEANER 32 OZ
8+CETANE
IMPROVER 32 OZ
•
•
•
•
•
•
•
•
FPP
PF
185
1 gallon
• Adds power, improves
MPG
• Prevents ultra low sulphur
fuel problems
• Cleans injectors and
intake valves
• Lubricates the entire
fuel system
• Stabilizes fuel
Totally disperses water
Cleans the injector system
Stabilizes fuel
Reduces gum and varnish
Prevents and eliminates sludge
Controls icing
Improves fuel economy
Reduces cylinder wall abrasion
PART NO. DESCRIPTION
00099
8 oz bottle
00230
1 gal bottle
• Emission Control Formula
• Removes all varnish and
carbonization in the entire
fuel system
• Increases fuel mileage and
improves emissions
• Exceeds all engine test
standards including L-10
and N-14
• Provides significant
performance benefits
in all diesel fuels
• Faster starting
• Reduced engine noise,
smoke and particulates
• Increases fuel mileage
• More power and
acceleration
J-B WELD Code: 543
Website: www.jbweld.com
J-B MARINE
WELD
• 3 times stronger
than conventional
putty sticks
• Intermittent heat
up to 500°F
• Great for exhaust
manifolds, tail pipes,
mufflers and
engine blocks
Part #8272F
Part #8297F
J-B KWIK
PROFESSIONAL
SIZE
• Marine weld is
impervious to
saltwater, petroleum,
chemical and acid
resistant once
fully cured
• Super strong,
non toxic and
temperature
resistant up to
600°F
• Every boat afloat
should carry Marine
Weld for quick
emergency repairs
• Same as J-B Kwik but
in a shop size package
containing two 5 oz tubes
• Sets in 4 minutes, cures
in 4 to 6 hours
• Non toxic and
temperature resistant
up to 300°F
• Can be drilled, tapped,
machined, sanded,
filled and painted
Part #8270F
J-B WELD
J-B KWIK
• An inexpensive
alternative to
welding, soldering,
and brazing
• Can be drilled,
tapped, machined,
sanded, filed, and
painted
• J-B Weld is super
strong, non-toxic
and withstands
temperatures up
to 600ºF
• Perfect for need-to-fixit-fast repairs at home,
on the farm, or in
the shop
• Can be formed,
drilled, ground,
tapped, machined,
filled, sanded,
and painted
• Sets in just 4 minutes.
Cures fully in 4 hours
• Water-proof,
petroleum, chemical,
and acid-resistant
• Withstands
temperatures up
to 300°F
Part #8265F
Part #8276F
J-B WELD
INDUSTRIAL
PROFESSIONAL
SIZE
• Same as J-B Weld but
in a shop size package
containing two 5 oz tubes
• Strong, permanent
repairs when hot welding
isn’t possible or practical
• Can be drilled, tapped,
machined, sanded,
filed, and painted
CHEMICALS AND LUBRICANTS
J-B WELD
HIGH HEAT
STICK
Part #8280F
J-B STIK
WATER WELD
• Ideal for repairing and
rebuilding rigid and
semi-flexible plastic,
ABS, PVC and CPVC
pipes, automotive trim,
fibreglass parts and
vinyl siding
• Sets in 20 – 25
minutes
• Can be sanded, drilled,
painted or sawed
• Great for automotive
trim, bumpers and
fibreglass parts
• J-B Stik is a hand
kneadable, steelreinforced epoxy
putty adhesive/
sealant
• Cures completely
submerged in water
or gasoline
• Fully cured in
60 minutes
• Can be drilled,
sanded, filed,
tapped, machined,
and painted
• Plug or seal practically
anything that leaks
• All-purpose adhesive for
metals, wood, fibreglass,
masonry, ceramics, PVC
and ABS
• Permanently repair holes,
gouges, cuts… even
seals rot in fiberglass
and wood
• Cures under water
Part #8267F
Part #8277F
J-B
B WELLD
Part #8237F
KWIKPLASTIK
186
MOLYSLIP Code: 989
Website: www.molyslip.com
Online catalogue: www.molyslip.com/cpg-web.pdf
CHEMICALS AND LUBRICANTS
MOLYSLIP
TRANSMISSION
SUPPLEMENTS
• 2 distinct products
• Automatic-reduces slippage,
smooths out harsh shifts and
protects components
• Manual-protects against
shock loads, provides
fingertip gear changes,
reduces howl in differentials
PART NO. PART NO.
AUTOMATIC MANUAL SIZE
TRANS
TRANS
5932
3422
225 ml
5935
3425
1L
5936
3426
4L
MOLYSLIP COPASLIP
ANTI-SEIZE
• High temp, high film strength,
copper anti-seize
• Aerosol provides quick solution to
wheel/hub corrosion and seizing
• Larger sizes available
PART NO. DESCRIPTION
3471
57 g tube
3472
250 g jar with brush
3473
454 g wide-mouth jar
4470
300 g aerosol
PART NO. SIZE
3412
300 mL
3415
1L
3416
4L
MOLYSLIP E OIL
SUPPLEMENT
187
DESCRIPTION
85 g AS/40 (with 40% moly)
3352
454 g AS/40 (with 40% moly)
3450
85 g AS/65 (with 65% moly)
• For new and rebuilt engines
• 300 mL
MOLYSLIP GREASES
• Multi-Purpose Grease (MPG) outlasts,
outperforms other greases
• Waterproof and non-melt
• High Temp Bearing Grease (HTBG) can handle
higher speeds and peak temps to 300°C
• Larger sizes available
PART NO. PART NO.
MPG
HTBG
DESCRIPTION
5970-I
3460-I
400 g cartridge
5971
3461
454 g jar
5972
-
2 kg tin
MOLYSLIP
SPRAY LUBES
• High moly content in non-melt
grease base
• For engine, gear, driveshaft
assembly and brake service
• Larger sizes available
3350
MOLYSLIP
BREAK-IN OIL
SUPPLEMENT
• Reduces wear and friction on gas
and diesel engines
• Dyno tested HP and torque gains
• Fuel savings
MOLYSLIP ASSEMBLY
COMPOUNDS
PART NO.
• Effective, long-lasting
lubricants with moly
• Reach hard to get at
lubrication points
• Won’t drip off
PART NO.
DESCRIPTION
5962
180 g liquid grease
5770
375 g open gear spray
6962
180 g chain lube
3483
325 g air drying film
MOTHERS Code: 177
Website: www.mothers.com
POWERBALL® PRODUCTS
35140
PowerBall® Polishing Tool
35141
PowerBall® Mini Polishing Tool
35146
PowerCone® Polishing Tool
35148
PowerMetal®, 8 oz / 236 ml
The All-In-One kit includes PowerBall
4 Lights® polishing tool, 8 oz PowerPlastic
4 Lights® polish, two double-sided severe
damage restoration pads, and a 15" x 15"
microfiber towel.
MOTHERS WAX
CALIFORNIA GOLD
PART NO. DESCRIPTION
PART NO. DESCRIPTION
20016
FX SynWax®, 16 oz / 473 ml
35600
Car Wash, 16 oz / 473 ml
20224
FX Spray Wax, 14 oz / 710 ml
35632
Car Wash, 32 oz / 946 ml
05664
Car Wash, 64 oz / 1.89 L
37100
Pre-Wax Cleaner,
16 oz / 473 ml (Step #1)
38100
Micro-Polishing Glaze,
16 oz / 473 ml (Step #2)
35500
Brazilian Carnuba Cleaner Wax,
12 oz / 340 g paste
35701
Brazilian Carnuba Cleaner Wax,
16 oz / 473 ml liquid
35550
Pure Brazilian Carnuba Wax,
12 oz / 340 g paste (Step #3)
35750
Pure Brazilian Carnuba Wax,
16 oz / 473 ml liquid (Step #3)
37240
Clay Bar Cleaning and Restore
System, includes two 80 g clay
bars, 16 oz / 473 ml Showtime®
Instant Detailer, 15" x 15"
microfiber towel
38216
Showtime® Instant Detailer,
16 oz / 473 ml
08224
Showtime® Instant Detailer,
24 oz / 710 ml
38408
Scratch Remover,
8 oz / 236 ml
MOTHERS POLISH
PART NO. DESCRIPTION
35100
Mag and Aluminum Polish,
5 oz / 141 g
05101
Mag and Aluminum Polish,
10 oz / 284 g
35106
Billet Metal Polish, 4 oz / 113 g
35208
Chrome Polish, 8 oz / 236 ml
06208
Plastic Polish, 8 oz / 236 ml
06924
Back-to-Black Tire Shine,
24 oz / 710 ml
36108
Back-to-Black, exterior bumper
and trim care (rubber, plastic
and vinyl), 8oz / 236 ml liquid
MOTHERS CLEANER
PART NO. DESCRIPTION
05424
Carpet/Upholstery Cleaner,
24 oz / 710 ml
36412
Leather Cleaner, 12 oz / 355 ml
36312
Leather Conditioner,
12 oz / 355 ml
06616
Glass Cleaner, 16 oz / 473 ml
20524
FX Wheel and Tire Cleaner,
24 oz / 710 ml
06824
Tire and Rubber Cleaner,
24 oz / 710 ml
MOTHER
RS
MOTHERS PROTECTANT
PART NO. DESCRIPTION
35316
16 oz / 473 ml
05324
24 oz / 710 ml
CHEMICALS AND LUBRICANTS
POWERBALL
4 LIGHTS®
HEADLIGHT RESTORATION
PART NO. DESCRIPTION
188
NLS Code: 483
Website: www.nlsproducts.com
CHEMICALS AND LUBRICANTS
CLEAR VINYL LIQUID
PATCH REPAIR
REPAIRS LAST LONGER AND
STRONGER THAN ORIGINAL
VINYL!
• Repairs match all colours
• Applies to vinyl without heat
• 28 ml tube
CUTS POLISHING TIME BY 80%
• Great surface prep/cleaner
• Removes stains and oxidation
from aluminum, stainless steel,
diamond plate, brass, gold, silver,
magnesium and copper
• 8 oz / 237 ml bottle
EASY ON EASY OFF!
• Shines and protects aluminum,
stainless steel, diamond plate, brass,
gold, silver, magnesium and copper
• Removes oxidation, tar and bugs from
paint, rust and chrome
• Penetrates and frees frozen and rusted
parts – bolts, engine parts, hinges,
locks, etc.
• Lubricates motorcycle and bicycle
chains, bearings, chains, hinges, rollers,
wheels and other moving parts, reducing
heat build-up in high pressure applications
• Suppresses corrosion and rust on
aluminum and chrome surfaces, guns
and fishing equipment, locks, marine
equipment, industrial machinery, relays,
rollers, switches, tools and more
PART NO. DESCRIPTION
SILICONE HD9 LUBE
285 G AEROSOL
• Heavy duty industrial strength
• Superior liquefied formula
lubricating grease
• Reduces wear, stops squeaks and
repels moisture
• Remains soft and pliable
• Metal to Metal / Metal to Plastic
lubrication
• Works in high and low temperatures
• Contains no solvents,
hydrocarbons, silicones or teflons
• Prevents brake noises
• Extends your brake life
• Waterproof
• O.E.M. approved
• Prevents rust, oxidation of rotors/
drums, stops seizing of lug nuts
and threads
8oz / 237 ml bottle
71640
16oz / 473 ml bottle
RADCHEK 3-IN-1
COOLANT TEST STRIPS
70 STRIPS/BOTTLE
FOR EXTENDED LIFE AND
CONVENTIONAL COOLANTS
TESTS: Reserves alkalinity, freeze point/
boiling point and pH levels
HEAVY DUTY
SILENCER 255 G
AEROSOL
• Heavy duty industrial strength synthetic
polymer lube
• Dries to the touch, lubricant effective
from –40ºC to +205ºC
• Great for auto, marine, farm, shop,
office, and industrial use
• Lubricates, seals and protects metal,
plastic, rubber and wood
• Stops sqeaks, friction and corrosion
71611
AUTOMOTIVE & LIGHT TRUCKS
LITHIUM HD
WHITE GREASE
315 G AEROSOL
C10 BREAKTHRU
370 G AEROSOL
MAGIC MIX®
METAL POLISH
MAGIC MIX® PREP
CLEANER POLISH
RADCHEK 4-IN-1
COOLANT TEST STRIPS
50 STRIPS/BOTTLE
FOR EXTENDED LIFE AND
CONVENTIONAL COOLANTS
TESTS: pH levels, glycol, nitrite
and molybdate
FLUID FILM SUPERIOR LUBRICANT
•
•
•
•
Environmentally friendlier
Solvent free
Non-toxic
Impregnates the pores of exposed metal; keeps moisture
and oxygen out, stopping rust
• Offers rust and corrosion protection
• Penetrates through rust, stopping all metal deterioration on
contact; migrates to inaccessible areas by capillary action
PART NO. DESCRIPTION
NLLS
189
1450
145 g aerosol
5207
237 ml brush top can
3300
333 g aerosol, 12 per case
3700
3.79 L
4300
20 L
NEVR-DULL
MAGIC
WADDING
POLISH
142G CAN
• Cleans all metals with nothing to shake up, nothing
to spill
• Great on brass, copper, steel, aluminum, chromium,
nickel, pewter, zinc, silver and gold
• Removes rust, tar and grime off the chrome on
your vehicle
NLS Code: 483
Website: www.nlsproducts.com
TECH WOOD 28 G
•
•
•
•
•
• Hardens in 10-15 mins
• Molds to any size
• For interior/exterior permanent
wood repairs
• Can be drilled, sawed, sanded,
stained and painted
Plastic fiberglass repair
Cures under water (fresh or salt)
Dries white, will not shrink, crack, rot or pull away
Non- yellowing and rustproof
Repairs PVC, ABS, gutters, seal electrical wires, plastic
bumpers, battery cases, fish boxes, sprinkler heads, on board
fuel tank leaks, and many automotive and household uses
GLOOZIT INDUSTRIAL STRENGTH
ADHESIVE/SEALANT
TECH STEEL
• All purpose, UV resistant
• Once cured GLOOZIT remains flexible, is able to
withstand temperature changes as well as the
expansion and contraction of dissimilar materials
• GLOOZIT bonds virtually everything
PART NO. DESCRIPTION
• Steel reinforce epoxy putty
• Steel hard in 15 minutes, full cure in
1 hour
• 500°F resistant
• Permanently adheres to steel, aluminum, wood, copper, cast iron, PVC,
AVS, bronze concrete, plastic, glass,
fiberglass, ceramics, brass and more
8312
90 ml automotive
PART NO. DESCRIPTION
8812
90 ml industrial
16002
75 g
8612
90 ml marine/RV
6004
150 g
8712
90 ml shoe glue
8512
90 ml plumber’s tube
8412
90 ml home craft tube
CHEMICALS AND LUBRICANTS
TECH PLASTIC 57G
X-TREME TAPE
FOR QUICK EMERGENCY REPAIRS!
• Multi-use for auto, truck, farm, house,
plumbing, sports, outdoor, electrical,
garden, tools and marine
• A high quality wrap made from a special
silicone compound which adheres to
itself when wrapped under tension
• No adhesive, bonds only to itself!
• Stretches 3 times its length
• Conforms to irregular shapes
• Forms a permanent air and water
tight seal
• Insulated to 8,000 V
• Won’t melt up to 260˚C and is flexible
to -54˚C
• Tensile strength of 600 psi
PART NO. DESCRIPTION
Black - Automotive
5200
White - Marine/RV
• An amazing scientific breakthrough that removes motor oil, grease and heavy
soils from driveways, garages, walkways, barbecue grills, lawn equipment, plastic
playground equipment, wooden decks and a variety of surfaces without scrubbing
• An excellent cleaner for
household chores such as
PART NO. DESCRIPTION
showers, tubs, toilets, sinks,
48721
946 ml (trigger sprayer)
fiberglass, etc.
• Deep penetrating power
91001
3.78 L
• Safe on concrete, asphalt,
paint and sealers
NLLS
5100
DRIVE UP
190
LUCAS OIL Code: 345
Website: www.lucasoil.ca
CHEMICALS AND LUBRICANTS
LUCAS SEMI-SYNTHETIC
MULTI-VEHICLE ATF
LUCAS POWER STEERING
FLUID WITH CONDITIONERS
• Semi-Synthetic multi-vehicle ATF
meets or exceeds all manufacturers
specifications both import and domestic
including VW, BMW, Mercedes, Honda,
Nissan and Toyota.
• Not recommended for Ford CVT, Ford
Type F or MB 236.12.
Lucas Power Steering Fluid with Conditioner is
formulated with the highest quality synthetic base
oils and additives to help prevent power steering
unit leaks, provide smooth operation and eliminate
squealing.
LUCAS SYN 75W-90
TRANS & DIFF LUBE
LUCAS SYN 75W-140
TRANS & DIFF LUBE
Lucas Synthetic Gear Oil is a non-foaming,
super slick, long lasting lubricant designed
especially for heavy duty or high performance
applications. Contains a special additive
package that cushions gears and resists
"squeezing out" under extreme pressure
situations. Specially designed to stand up to
high temperatures without losing its lubricity.
Lucas Synthetic Gear Oil is a non-foaming, super
slick, long lasting lubricant designed especially
for heavy duty or high performance applications.
Contains a special additive package that cushions
gears and resists "squeezing out" under extreme
pressure situations. Specially designed to stand
up to high temperatures without losing its lubricity.
LUCAS HYDRAULIC OIL
BOOSTER & STOP LEAK
LUCAS HUB OIL
Hub oil is over-worked and often neglected, it’s
also hard to change and prone to leak. Lucas
Hub Oil is a heavy duty blend of special oils and
additives designed to compensate for these
problems. It totally stops most hub seal leaks.
Product also available in larger containers for
fleet maintenance.
Lucas Hydraulic Oil Booster & Stop Leak was
formulated to renew hydraulic fluid with an
additive package that stops seal leaks, boosts
pressure, reduces operating temperatures
and increases the life of hoses, rams and
cylinders. It is an inexpensive solution to most
hydraulic problems and a perfect preventative
maintenance product.
LUCAS FUEL TREATMENT
LUCAS HEAVY DUTY
OIL STABILIZER
LU
UCAS OIL
191
Lucas Oil Stabilizer is a 100% petroleum
product formulated to eliminate dry starts and
reduce friction, heat and wear in any type of
engine. It allows motor oils a higher degree of
lubricity which reduces oil consumption and
operating temperatures. Use Lucas Oil Stabilizer
in gear oil to stop leaks, reduce operating
temperatures and increase the life of the gear
oil. Since it is pure petroleum, it can safely
blend with all other automotive lubricants, even
synthetics, ATF and mineral oil. It keeps old
engines alive and new engines new.
Lucas Fuel Treatment is formulated for both
gasoline and diesel engines, carbureted or fuel
injected. It gives your fuel system what it really
needs - a blend of super slick oils and additives
with a high detergent action that allows the engine
to operate at maximum efficiency. Also, it cleans
and lubricates the carburetor and injectors and
causes the fuel to burn more thoroughly for
increased power and less fuel consumption.
Lucas Fuel Treatment should definitely be used
in vehicles that require leaded fuel because it
actually replaces the benefits of lead in gasoline
without causing harmful emissions. Use it to pass
smog tests. Finally, it totally neutralizes the
harmful effects of low sulfur diesel fuel.
LUCAS OIL Code: 345
Website: www.lucasoil.ca
• Perfect for engine building
• Contains zinc, moly and other high pressure
additives for maximum protection during
engine break-in
• Use to pre lube bearings, cams, lifters,
valve train
• Prevents seizing, galling and scuffing
• Compatible with all oils
• Super slick and tacky
LUCAS AIR TOOL LUBRICANT
Lucas Air Tool Lubricant is a unique formula that was
developed for the working professional who demands
top performance. It combats rust and varnish and
coats the working parts with a cushion of waterproof
lubricants that resist blowout. That means it lubes the
tool and not the floor.
LUCAS HIGH TBN 15W-40
MAGNUM CI-4 LONG DRAIN
HD MOTOR OIL
LUCAS ENGINE OIL
STOP LEAK
• Lucas High TBN 15W-40 Truck Oil is a blend
of high quality base oils and an additive
package that allows extended drain intervals
and a much higher degree of protection from
metal to metal contact.
• Extended drain intervals
• Lower operating temperatures
• Higher degree of lubricity
• Higher oil pressure
• Cool quiet performance
• Longer engine life and no dry starts
Lucas Engine Oil Stop Leak is a unique formulation
of Lucas additives and very specific base stock
designed to stop seal leaks in engines. The
user can expect less engine noise, higher oil
pressure and less oil consumption as the Lucas
additives fill the space between worn parts.
LUCAS POWER STEERING
STOP LEAK
LUCAS TRANSMISSION FIX
Lucas Transmission Fix is a non-solvent formula
that stops slip, hesitation and rough shifting in
worn transmissions and completely eliminates most
seal leaks. Use in any transmission for preventative
maintenance. Use also in light duty manual
transmissions to increase shifting ease and
transmission life.
CHEMICALS AND LUBRICANTS
LUCAS ASSEMBLY LUBE
GUARANTEED to stop seal leaks in power steering
units or your money back. Totally corrects rack
and pinion problems. It is also effective in
reducing slack, squeals, and hard spots in worn
rack and pinions. Your results will be immediate
and long lasting.
LUCAS SYNTHETIC 15W-40
MAGNUM CJ-4 LONG DRAIN HD
MOTOR OIL
LUCAS SYNTHETIC MOTOR OILS
Lucas Synthetic Motor Oils are ideal for use on the
street and are a high quality blend of synthetic oils
selected to provide superior protection and performance in
your engine. The synthetic oils are especially well suited
to modern cars.
Lucas CJ-4 oil is designed for today’s new Diesel
engines and meets or exceeds recommendations for
the following: API CJ-4, CI-4+, CI-4, CF, SM, ACEA E7,
CUMMINS 20081, MACK EO-O PREMIUM PLUS 07,
CATERPILLAR ECF-3, DHD-1 DDC PG0593K218,
VOLVO VDS-4, NAVISTAR, JASO DH-2.
PART NO. DESCRIPTION
PART NO. DESCRIPTION
Syn 5W-20 Motor Oil
20049
Syn 5W-30 Motor Oil
10299
Synthetic 15W-40 Magnum CJ-4 Long Drain HD Motor Oil
PART NO. DESCRIPTION
20189
Syn 5W-40 Motor Oil
10297
15W-40 Magnum CJ-4 Long Drain HD Motor Oil
10179
Syn 0W-30 Motor Oil
20050
Syn 10W-30 Motor Oil
10436
Synthetic 5W-40 Magnum CJ-4 Long Drain HD Motor Oil
10211
Syn 0W-40 Motor Oil
20054
Syn 20W-50 Racing Oil
LU
UCAS OIL
20082
192
PERMATEX
Code: 610
Website: www.permatex.com
PERMATEX®
THREADLOCKERS
CHEMICALS AND LUBRICANTS
• Protects from corrosion and
vibration loosening
• 242 (Blue) is removable with
hand tools and normal effort
• 262 (Red) suited for permanent locking studs and
press fits
• Meets OEM specifications
PART NO. PART NO.
BLUE
RED
SIZE
24200
26200
6 ml tube
24215
27115
10 g gel TWIST™ tube
24240
26240
36 ml bottle
24250
26250
50 ml bottle
24225
26225
250 ml bottle
DIELECTRIC
GREASE
SILVER GRADE
ANTI-SEIZE
• Use for assembly and disassembly of metal parts
• Prevents galling during assembly
• Prevents rusting, cold welding and galvanic
corrosion between parts
• Resists most chemicals, acids, road salt, water
and steam
PART NUMBER DESCRIPTION
PART NUMBER DESCRIPTION
133H
113 g can
67VR
28 g carded tube
81464
241 g aerosol
22064
85 g carded
76764
454 g can
22065
85 g carded power can
HIGH TEMPERATURE THREAD SEALANT
THE RIGHT STUFF® GASKET MAKER
• OEM Specified
• Locks and seals threaded fittings
• Resists leakage, vibration
loosening, moisture, hydraulic
fluids and diesel
• Lubricates threads for easy
assembly and disassembly
• Up to 204°C (400°F)
• Seals instantly, forming
a reliable, long lasting
elastomeric rubber
gasket
• Sensor safe and non
corrosive
• One minute set up time
PART NO. DESC.
59214
6 ml carded
59234
50 ml carded
59225
250 ml tube
PART NO. DESC.
30874
147 ml cartridge
26015
212 g power bead can
33694
300 ml cartridge
5TH WHEEL GREASE 60 PACK
ULTRA CHERRY™ PUMICE HAND SCRUB
• Effectively and conveniently lubricates 5th wheel top plates
of trailer
• Requires no tools, creates no mess
• Designed for heavy duty applications
• Effective at extreme temperatures and environmental conditions
PEERMATEEX
193
• Necessary for effective
tune on high energy
ignition systems
• Prevents voltage
leakage around any
electrical connection
• Protects electrical connection, ignition parts and
wiring from moisture, salt, dirt and corrosion
• Prevents fusing of spark plugs to spark plug boots
•
•
•
•
Fresh cherry scent
Professional strength with skin care conditioners
Helps restore moisture and prevent dry chapped hands
3 L bottle with pump
FAST ORANGE®
LOTION HAND CLEANER
FAST ORANGE®
HAND CLEANERS
• Pure, fresh smelling natural citrus formula
• Biodegradable, waterless, petroleum
solvent free
• Gently cleans tough dirt
• Contains aloe, lanolin, jojoba and glycerin
for added skin conditioning and protection
• Pure, fresh smelling natural citrus formula
• Biodegradable, waterless, petroleum solvent
free
• Gently cleans tough dirt
• Contains aloe, lanolin, jojoba and glycerin
for added skin conditioning and protection
PART NO.
DESCRIPTION
SIZE
PART NO. SMOOTH PART NO. PUMICE SIZE
27218
Dry Skin Formula
3.78 L bottle with pump
23-108
25-108
220 ml bottle
35-406
Cream Hand Cleaner
2 kg can
23-116
25-116
440 ml bottle
35-013
Cream Hand Cleaner
400 g can
23-217
25-217
1.89 L bottle with pump
25072
Wipes
72 count bucket
23-218
25-218
3.78 L bottle with pump
25575
Pumice Bar Soap
163 g
SPRAY NINE Code: 610
Website: www.spraynine.ca
INDUSTRIAL CLEANER/DEGREASER
THE MOST VERSATILE WEAPON IN YOUR
CLEANING ARSENAL!
• Multi-purpose disinfectant, cleaner and degreaser
• Kills viruses within 30 seconds
• Kills bacteria within 45 seconds
• Biodegradable
• CFIA approved
POWERFUL CLEANING FOR THE TOUGHEST JOBS!
• A versatile cleaner that blends powerful cleaning agents, detergents and builders to deliver outstanding results without
harsh abrasives and caustic chemicals
• Fast acting formula
• Cuts through most industrial soils and stains
• Cost effective cleaning solution
• ISO 9001 compliant, CFIA Approved
• Biodegradable and non-flammable
• Ready to use
PART NUMBER DESCRIPTION
GREZ-OFF®
#1 RATED HEAVY DUTY DEGREASER!
• Professional strength formula hits hard and fast
with powerful water soluble solvents and fast
acting surfactants
• Water based solvents, no petroleum, harsh fumes
or odours
• Biodegradable and non-flammable
• Ready to use
C26822
650 ml trigger bottle
C26832
946 ml trigger bottle
C26802
2 L jug
PART NUMBER
DESCRIPTION
PART NUMBER DESCRIPTION
C26804
4 L jug
C13532
946 ml trigger bottle
C12532
946 ml trigger bottle
C26820
20 L pail
C13501
3.87 L jug
C12501
3.87 L jug
C26856
56.7 L drum
C13520
20 L pail
C12520
20 L pail
208 L drum
C13545
208 L drum
C12545
208 L drum
C26845
CHEMICALS AND LUBRICANTS
SPRAY NINE®
GLASS AND
STAINLESS
STEEL
CLEANER
POWER KLEEN
C97045
IDEAL FOR PARTS WASHING! HELPS OIL SEPARATE
FROM WATER AND WON’T CAUSE RUST!
• Powerful, non-solvent, aqueous based cleaning fluid
• Low foaming, biodegradable with powerful corrosion
inhibitors
• Allows easier reclamation and recycling
• Works in traditional and heated parts washers, pressure
washers and automated equipment
PART NUMBER
DESCRIPTION
C97001
3.78 L
C97005
18.9 L
C97045
208 L
GARAGE BOSS CONCRETE
CLEANER 11.3 KG
• Removes grease, grime and dirt from garage, service bay, machine shop and factory concrete floors
• Leaves a non-slick surface
• Fresh pine scent
SPR
RAY NIN
NE
LEAVES A SPARKLING
STREAK FREE SHINE!
• Effectively removes
dirt, dust fingerprints,
smudges and light
grease from glass,
stainless steel and metal
surfaces.
• Foaming formula ideal for
vertical surfaces
• Sprays on evenly with
refreshing lemon scent
• Biodegradable
• CFIA approved
• 600 g aerosol
194
RAIN-X Code: 610
Website: www.rainx.com
RAIN-X® ORIGINAL GLASS TREATMENT™
CHEMICALS AND LUBRICANTS
THE INVISIBLE WINDSHIELD WIPER!
• Dramatically improves wet weather visibility, safety and driving comfort.
Repels rain, sleet and snow; raindrops fly off your windshield. Seals glass
with a non-stick invisible barrier
• Helps to easily remove frost, ice,
PART NO.
SIZE
salt, mud and bugs
BCRX11212CN
207 ml bottle
• Improves response time up to a
full second or more, almost four
BCRX11413CN6 473 ml trigger bottle
car lengths at highway speeds
RAIN-X® LATITUDE® WIPER BLADES
ULTIMATE VISIBILITY IN RAIN, SLEET AND SNOW!®
EASY TO INSTALL
• For use on either originally installed standard or curved style
wiper blades. Pre-installed with small j-hook adapter and
contains multi-adapter for side pin, large j-hook and bayonet
wiper blade arms. Fits I and L (Insert and Lock) and PTB
(Pinch Tab Button) wiper blade arms.
HIGH PERFORMANCE WIPE
• Contoured design applies
even pressure along the entire
blade length. Specially blended
graphite coated rubber blade
delivers the ultimate smooth,
clean, chatter-free wipe
• Built-in aerodynamic spoiler
significantly reduces drag,
noise and wind lift.
800001557
16"
800001558
17"
800001570
18"
800001559
19"
800001560
20"
ICE RESISTANT FRAME
• Prevents ice and snow build-up
through the elimination of
exposed metal components.
Durable, rubber-encased
substructure increases wiper
flexibility and adherence to the
windshield in harsh conditions
800001561
21"
800001562
22"
800001563
24"
800001564
26"
800001565
28"
RAIN-X®
WEATHERBEATER®
WIPER BLADES
PART NO. SIZE
CONSUMER RATED BEST
IN WET WEATHER DRIVING
VISIBILITY!
Most preferred steel blade in
Canada. Meets or exceeds all
original equipment manufacturers’ standards. Provides a
smooth, clean, streak-free wipe by
using embedded friction reducers
and multiple pressure points to
hug the windshield. All natural
squeegee rubber resists cracking,
splitting and tearing caused by
heat, cold, windshield wiper
fluid and salt. Helps prevent and
remove sleet, snow, ice, bugs and
road spray from sticking to glass.
Quick and easy to install.
195
PART NO. SIZE
RX30212CN
12"
RX30213CN
13"
RX30214CN
14"
RX30215CN
15"
RX30216CN
16"
RX30217CN
17"
RX30218CN
18"
RX30219CN
19"
RX30220CN
20"
RX30221CN
21"
RX30222CN
22"
RX30224CN
24"
RX30226CN
26"
RX30228CN
28"
RAIN-X® TREATMENTS AND CLEANERS
ANTI-FOG
INTERIOR
GLASS
TREATMENT
2-IN-1 GLASS
CLEANER +
RAIN REPELLENT
;/=1/8
$(
;/=1/8
HIGH FOAMING
CAR WASH
CONCENTRATE
WASH AND
WAX™ CAR
WASH WITH
CARNAUBA
WAX BEADS
@
Z4G
@
Z4G
X-TREME
CLEAN™
GLASS
AND
PLASTIC
;/=1/8
ULTRA
LIQUID
WAX
;/=1/8
FAST
WAX
LIQUID
FORMULA
;/=1/8
SLIME Code: 610
Website: www.slime.com
SLIME® TIRE SEALANT
Seeks out and instantly seals tread area punctures up to 1/4" using Fibro-seal technology. Use on cars, trucks, SUV’s ATV’s mowers and more.
;/!%1F8
;///687
@
//687
SLIME SAFETY REPAIR™
FLAT TIRE REPAIR SYSTEM
&
24;
10 MINUTE
ALL PURPOSE
TIRE INFLATOR
• Air and Slime simultaneously pass directly
through the valve core; eliminates need to
remove valve
• Repairs and inflates a 15" tire from flat within
7 minutes
• Built in light for night emergencies
• 12 V inflator with pressure gauge
CHEMICALS AND LUBRICANTS
;/41
• 12 V Inflator
• Adapters for inflatables
3 MINUTE HEAVY DUTY
INFLATOR
• Inflates a standard car tire quickly in
three minutes!
• Portable, 12 V, 15" coiled hose with
built in gauge and light
• Adapters for inflatables
• Canvas
storage bag
included
TIRE
REPAIR
PLUGS
5 PACK
FLOOR PUMP
TIRE PATCH KIT
WITH GLUE
TIRE PLUG
KIT WITH
T-HANDLE
PART NO. DESCRIPTION
Radial Tires
24015
Bikes/Rafts
5-50 PSI
PENCIL
GAUGE
SLIM
ME
24016
196
SLICK 50®, GUMOUT®, BLACK MAGIC® Code: 610
Websites: www.slick50.com, www.gumout.com, www.blackmagicshine.com
SLICK 50®
CHEMICALS AND LUBRICANTS
SLICK 50®, GUMO
OUT®, BLACK
K MAGIC
C®
197
SLICK 50®
ENGINE
TREATMENT
ADVANCED
FORMULA
946ML
SLICK 50®
ENGINE
TREATMENT
946ML
• Slick 50® treated engines sustain
50% less wear and tear than engines
run with premium motor oil alone
• Keeps engine clean, preventing build
up of sludge
• Creates enhanced layer of lubrication, minimizing engine heat
• Combines Slick 50® Protection
Chemistry with a fully formulated
10W-30 motor oil to provide protection
against friction and heat
• Compatible with all types of motor oil,
safe for all automotive gasoline engines
• 50,000 Mile Engine Limited Warranty
included
SLICK 50®
FUEL
SYSTEM
FORMULA
473ML
SLICK 50®
HIGH MILEAGE
FUEL SYSTEM
TREATMENT
473ML
• Designed to clean the entire fuel
system from tank to tailpipe
• Cleans harmful deposit build-up
• Improves fuel efficiency, restores
original power and performance
• Smooths and reduces rough
engine idling
GUMOUT®
• Restores and increases lost power,
performance and fuel economy
• Decreases emissions
• Reduces hesitation, rough idling
and engine knock
BLACK MAGIC®
GUMOUT®
GAS TREATMENT
177 ML
GUMOUT® FUEL
INJECTOR CLEANERS
• Cleans direct and indirect fuel injectors, intake
valves and ports
• Prevents future deposit build-up
• Restores lost horsepower
• Safe for use in turbo and supercharged vehicles
• Keeps combustion chamber clean while
reducing emissions
• Will not void OEM/manufacturer’s warranty
GUMOUT®
OCTANE BOOSTER
296 ML
PART NO. DESCRIPTION
800001738
Diesel/Biodiesel, 296 ml bottle
800001739
177 ml bottle
800001861
Flex-Fuel, 177 ml bottle
GUMOUT® REGANE™
FUEL SYSTEM CLEANERS
•
•
•
•
•
•
Cleans the ENTIRE fuel system
Maximizes fuel economy and increases lost horsepower
Prevents future deposit build-up, reducing emissions
Fights damaging effects of ethanol up to 15%
Safe for use in turbo and supercharged vehicles
Will not void OEM/manufacturer’s warranty
PART NO. DESCRIPTION
800001742
High Mileage, 177 ml bottle
800001743
Complete, 177 ml bottle
GUMOUT® PROFESSIONAL
• Restores performance and fuel economy. Improves
rough engine starts, maximizes engine life and
extends the life of new oils. Reduces engine ping,
knock, rough idling and emissions
BLACK MAGIC® CAR CARE
Get that "just off the lot" look with long-lasting,
high gloss, extreme shine! Cleans, shines,
and protects! Revitalizes your car’s interior
and exterior!
• Tire Wet: The deepest shine of any leading
tire spray. Easy-to-control spray for excellent
coverage, no over-spray plus, sprays upside
down leaving tires looking wet, black and
glossy, better than new. Easy to use, no wiping
• Wheel Cleaner: Easily removes brake dust, dirt,
and grime. Safe on all wheel types. Improves
the appearance of all types of wheels without
hazing or discoloration
• Pro Shine: Long-lasting shine. No water
formula. Superior protection for vinyl, leather,
rubber and plastics. Exclusive fadeblok™
technology protects against harmful UV rays
by diffusing UV radiation that causes fading,
drying and cracking
PART NO. DESCRIPTION
BC22145CN
Tire Wet® Foam, 510 g aerosol
BCBM23CN
Tire Wet®, Extreme Shine,
680 ml bottle
PART NO. DESCRIPTION
800002265
2-Step Total Fuel System Cleaning
Service Kit
800002266
Oil System Cleaner, 473 ml bottle
800002270
Fuel System Cleaner, 177 ml bottle
BM41023CN
Wheel Cleaner, 680 ml bottle
800002263
Pro Shine Protectant™, 473 ml
SPRAYON Code: 435
Website: www.sprayon.com
Sprayon® cleaners, degreasers, lubricants and sealants are specifically
formulated for use in all manufacturing and industrial environments. From
heavy duty industrial lubricants to general purpose cleaners, Sprayon® satisfies
the most demanding maintenance requirements in every part of your facility.
Y
Y
Y
Y
Y
Y
Y
DESCRIPTION
C000711LQ
C00711000
The Protector™ All-Purpose Lubricant
C020757LQ
C00757000
Heavy duty Citrus Degreaser
C020880LQ
C00880000
General Purpose Cleaner
C020885LQ
C00885000
Stainless Steel Cleaner
C020749LQ
C00749000
Electrical Degreaser
C020848LQ
C00848000
Flash Free® Electrical Degreaser
C002204LQ
C02204000
Electronic Contact Cleaner
C000100LQ
C00100000
White Lithium Grease
C000103LQ
C00103000
Rust Breaker® Penetrant
C000201LQ
C00201000
Open Gear & Wire Rope Lubricant
C000202LQ
C00202000
Moly Chain Lubricant
C000204LQ
C00204000
Dry Film Graphite Lubricant
C000206LQ
C00206000
All-Purpose Silicone Lubricant
C000208LQ
C00208000
Cutting Oil
C000210LQ
C00210000
Food Grade Silicone Lubricant
C000700LQ
C00700000
Food Grade Machinery Oil
C000777LQ
C00777000
Outdoor Metal Protectant
C000607LQ
C00607000
Belt Dressing
C000705LQ
C00705000
Non-Chlorinated Brake & Parts Cleaner
N/A
C00311000
Dry Film Release Agent
N/A
C00739000
Silver Galvanizing Compound
N/A
C00740000
Zinc-Rich Galvanizing Compound
N/A
C00738000
Stainless Steel Coating
Y
SPRAYO
ON
Y
PART NO.
LIQUISOL AEROSOL
CHEMICALS AND LUBRICANTS
SPRAYON®
198
SEA FOAM® Code: 299
Website: www.seafoamsales.com
SEA FOAM® MOTOR TREATMENT
CHEMICALS AND LUBRICANTS
SEA FOAM® TRANS TUNE
• Sea Foam motor treatment is a 100% pure petroleum product that safely
and effectively cleans internal fuel and oil system components, helping your
gasoline or diesel engine run cleaner and more efficiently
• Stabilizes fuel for 2 years
• Trans Tune is a 100% petroleum product
comprised of three specific oils blended in just
the right proportions to SAFELY clean varnish
deposits in transmission, power steering and
hydraulic pump components
• 473 mL
BUGS-B-GONE
• Bugs-B-Gone is designed to remove
dead bugs from your vehicle
quickly and easily
• Uses: brake dust off wheels,
bugs off radiators, algae
off boats, soot off chrome
stacks and before painting
a vehicle
• Gallon Concentrate
is super heavy duty
and designed for use
by detail shops, body
shops, car washes, truck
washes and fleets to
clean their vehicles
PART NO. DESCRIPTION
RIPTION
SF-16
Motor Treatment,
t
t 473 mll
SF-128
Motor Treatment, 1 Gallon/3.78 L
PART NO. DESCRIPTION
BBG-1
Trigger Spray, 16 oz
BBG-4
Concentrate Gallon
BBG-5
Windshield Washer Concentrate, 8 oz
SEAFOA
AM
199
SEA FOAM® SPRAY
PRAY
A
SEA FOAM® DEEP CREEP
• Used in cleaning harmful
mful gums, varnish
nduction systems and
and carbon from air induction
combustion chamberss on all 2-cycle and
nes
4-cycle gasoline engines
s, pings, flat spots and
• Cures hesitation, stalls,
bon buildup
rough idle due to carbon
• Use to store and fog 2-cycle and 4-cycle engines
P registered
• Helps pass emission tests, EPA
• Cleans intake valves, pistons and catalytic
converter odors
ickup
• Restores power and pickup
• Oxygen sensor safe
• 473 mL
• Deep Creep’s fast acting, 100% petroleum
formula quickly penetrates rusted parts,
lubricates moving metal parts, disperses
moisture, and cuts through grease, engine
varnish and road tar
• Withstands heat better than other penetrating oils
• 473 mL
WIPECO INDUSTRIES Code: 448
Website: www.wipe-it.ca
WIPING CLOTHS
NEW
DESCRIPTION
RSTW-30P
Shop Towels, 30 pack
PART NO. DESCRIPTION
RTT-Z1619/10W
Terry Towels, 10 pack
BX-25C
Colored T-shirt Wipers, 25 lbs
RMFB-1414/10P
Microfiber 14 x 14, Colour Blue , 10 pack
BX-10C
Colored T-shirt Wipers, 10 lbs
RMFY-1414/10P
Microfiber 14 x 14, Colour Yellow, 10 pack
SXG-10C
Grey Fleece Wipers, 10 lbs
RMFO-1414/10P Microfiber 14 x 14, Colour Orange, 10 pack
BXW-10C
White T-Shirt Wipers, 10 lbs
RMFG-1414/10P Microfiber 14 x 14, Colour Green, 10 pack
BXW-W10C
Washed White T-shirt Wipers, 10 lbs
RMFR-1414/10P
FXW-8C
White Flannel Wipers, 8 lbs
SXC-25C
Colored Fleece Wipers, 25 lbs
SXC-10C
Colored Fleece Wipers, 10 lbs
SXG-25C
Grey Fleece Wipers, 25 lbs
Microfiber 14 x 14, Colour Red, 10 pack
CAR CLEANING AND POLISHING - NEW
CHAMOIS
WHEEL BRUSH
PART NO. DESCRIPTION
PART NO. DESCRIPTION
BW-50
Wheel Brush Soft, 50 cm
RCH-N35
Natural Chamois, 3.5 sq ft
BW-24
Wheel Brush Soft, 24 cm
RMFPU-1
Dry Tex Chamois, 1 sq ft
BR-25
Wheel Brush Aggressive, 25 cm
RMFPU-2
Dry Tex Chamois, 2.5 sq ft
RMFPU-4
Dry Tex Chamois, 4 sq ft
WASH MITTS
MICROFIBER
PART NO. DESCRIPTION
RWM-C
Microfiber Chenille Blue
RWM-D
Dynel Jumbo Auto Maniac
RWM-P
Synthetic Sheep Wool
PART NO. DESCRIPTION
WAX APPLICATORS
PART NO.
DESCRIPTION
RSAW-T641/12P
Jumbo 6 x 4 x 1, 12 pack
RSAW-T441/12P
Regular 4 x 4 x 1, 12 pack
RWA-3P
Microfiber round with handle,
3 pack
RMF-5R
Microfiber Detailing Cloths,
5 pack
RMF-2424
Microfiber Drying Towel,
4 sq ft
RAM-MF
Auto Maniac Detailing Cloth,
Seam Free, 16 x 16
RAM-MT
Auto Maniac Drying Towel,
Seam Free, 20 x 30
@
MICROFIBER 4 PIECE CAR CARE KIT
FLOW THROUGH
EXTENDABLE BRUSH
• All in-one-car wash kit
• Contains wash mitt, bug sponge, detailing cloth and drying towel
• 4 ft, extendable to 6 ft (1.8 m)
MIGHTY DUSTER
• 24 cm
• Treated cotton cloth - 1 pack
BUG SPONGE
JUMBO
PEANUT SHAPE
SPONGE
WIPECO
SILICONE SQUEEGEE
JANITORIAL AND SANITATION
RECYCLED
PART NO.
200
W. RALSTON Code: 185
Website & Online Catalogue: www.ralston.ca
INDUSTRIAL GARBAGE BAGS
2600 SERIES BLACK ECO-LOGO CERTIFIED
PART NO. DESCRIPTION
JANITORIAL AND SANITATION
20” x 22” Regular – 500/cs
2654-01
22” x 24” Regular – 500/cs
2661-01
26” x 36” Regular – 250/cs
2671-01
26” x 36” Strong – 200/cs
2673-01
30” x 38” Strong – 200/cs
2675-01
35” x 50” Strong – 125/cs
2677-01
42” x 48” Strong – 100/cs
2681-01
26” x 36” Extra Strong – 125/cs
2683-01
30” x 38” Extra Strong – 125/cs
2685-01
35” x 50” Extra Strong – 100/cs
2687-01
42” x 48” Extra Strong – 75/cs
6675-01
35” x 50” 3 ml Contractors Bag – 100/rl
CERTIFIED COMPOSTABLE BAGS
PART NO. DESCRIPTION
0504-03
17.5” x 16.75” Bin Liner – 50/bx - 12bx/cs
0506-03
25” x 30” Bin Liner – 24/bx - 10bx/cs
0546-03
17.5” x 16.75” Bin Liner 12/bx - 60bx/cs
PART NO. DESCRIPTION
2150-03
17.5” x 16.75” Bulk Pack – 500/cs
0305-00
9’ x 400’ Clear / Box
2156-03
25” x 30” Bulk Pack – 200/cs
0311-00
10’ x 25’ Utility Clear Roll
0312-00
10’ x 25’ Regular Clear Roll
0313-00
10’ x 25’ Industrial Clear Roll
0331-00
8’ x 12’ Utility Clear Roll
COVER IT – PLASTIC DROP SHEETS
0332-00
8’ x 12’ Regular Clear Roll
0333-00
8’ x 12’ Industrial Clear Roll
6 MIL VAPOUR
BARRIER POLY SHEETING
PART NO. DESCRIPTION
W. RALSTON
201
2652-01
5033-00
120” x 150’ per Roll
5040-00
240” x 100’ per Roll
LIGHT DUTY POLY SHEETING
PART NO. DESCRIPTION
4224-00
240” x 100’ per Roll
4229-00
120” x 150’ per Roll
2900 SERIES CLEAR ECO-LOGO CERTIFIED
PART NO. DESCRIPTION
2952-00
20” x 22” Regular – 500/cs
2956-00
24” x 24” Regular – 500/cs
2971-00
26” x 36” Strong – 200/cs
2973-00
30” x 38” Strong – 200/cs
2975-00
35” x 50” Strong – 125/cs
2981-00
26” x 36” Extra Strong – 125/cs
2985-00
35” x 50” Extra Strong – 100/cs
2987-00
42” x 48” Extra Strong – 75/cs
2900 SERIES COLOURS
PART NO. DESCRIPTION
2952-10
20” x 22” White Regular – 500/cs
2971-07
26” x 36” Green Strong – 200/cs
2971-08
26” x 36” Blue Strong – 200/cs
2975-08
35” x 50” Blue Strong – 125/cs
0376-06
31” x 46” Orange – 50/box
SPRAYON Code: 435
Website: www.sprayon.com
SPRAYON® ECO-GRADE™
Environmentally preferred products are better for the environment and better for
your health. Eco-Grade™ has several advantages over conventional programs,
they are safe, versatile and environmentally responsible without sacrificing
performance.
PART NO.
TRIGGER
AEROSOL
DESCRIPTION
C1206T1232
C1206S1219
Restroom Cleaner
C1204T1232
C1204S1219
Heavy Duty Cleaner
C1205T1232
C1205S1219
Glass Cleaner
N/A
C00406000
Soy Degreaser
PART NO.
TRIGGER AEROSOL
GALLON
DESCRIPTION
C1201T1232
C012010401
Neutra-Force®
Heavy-Duty Foaming
Degreaser
C010870401
Neutral All-Purpose
Cleaner
N/A
N/A
N/A
C00887000
C1219T1232
C1201S1219
N/A
N/A
Coil & Fin Cleaner
C012190401
Water-Based Citrus
Degreaser
SPRAYON
SPRAYON® CLEANERS
JANITORIAL AND SANITATION
Sprayon® Eco-Grade™ products preserve and protect your equipment, facility, and
your workforce to prevent costly damage and downtime. All Sprayon® Eco-Grade™
products, including fast-acting cleaners and degreasers, are formulas made from
renewable, biodegradable resources.
202
Rubbermaid Commercial Products Code: 760
Website: www.rubbermaidcommercial.com
JANITORIAL AND SANITATION
$&
$&'"
POP UP
SAFETY CONE
• Caution warning messages imprinted
in English, French and Spanish
• Collapsible, automatically
deployed cone
• W 21" x H 30" x D 21"
$&
'"
FLOOR SIGN
• Lightweight folding design
for convenient storage or
transport on janitor cart
• Caution warning messages
imprinted in English,
French, and Spanish
$&'"
MOBILE BARRIER
• For indoor use. Flexible, can be set straight,
curved or in a circle
• ANSI approved color and graphics
• 13 ft long with 16 articulating panels, has
two 5" non-marking wheels, and four locking
straps to secure barrier in closed position
RUBB
BERMAID
203
$&
STRUCTURAL FOAM TILT
TRUCK, UTILITY DUTY
• Durable molded trucks handle heavy loads with ease
• Unique "steering wheel" handle provides excellent
maneuvering capability
• L 64.5" x W 20" x H 38", 600 lb capacity
26.6 L
WASTEBASKET
• Space efficient
and economical
• L 14 3/8" x W 10 /14"
x H 15", 28 1/8 qt
capacity
$&&'
BRUTE®
50 GALLON
ROLLOUT
CONTAINER
• Tough Dur-x™
construction lends long life
• Heavy-duty, 8" (20.3 cm) wheels
afford easy mobility, even over steps or curbing
• L 28.5" x W 23 3/8" x H 36.5", 50 gal capacity
$&&'
$&&'
BRUTE®
166.5 L / 44 GALLON
UTILITY CONTAINER
121.1 L BRUTE®
CONTAINER
WITHOUT LID
• Patent pending venting channels
dramatically reduce the force
required to remove a filled
can liner by over 50%
• Dia 24" x H 31 1/2" 44 gal capacity
• All plastic,
professional grade
construction will not rust,
chip or peel; resists dents
• Dia 22" x H 27 1/4"
32 gal capacity
$&&'
$&
&'
SLIM JIM®
WITH VENTING
CHANNELS
UNTOUCHABLE®
SQUARE
CONTAINER
• Patent pending venting channels
increase efficiency
• Improves worker well being by taking
the strain out of liner removal
• L 22" x W 11" x H 30" 23 gal capacity
• Patent pending can liner
cinch allows for bag
retention and eliminates
knot tying
• Durable and crack resistant,
even under tough
indoor/outdoor conditions
• L 16.5" x W 15.5" x H 30.9", 23 gal capacity
$&
"&
$&
35 GALLON
RANGER™
CONTAINER
LOBBY PRO
UPRIGHT
DUST PAN
• High capacity
waste management
• Designed for stadiums,
parks, shopping malls and
other high traffic areas
• L 21.5" x W 21.5" x H 41",
35 gal capacity
• Stylish pan design
• Durable rear wheels improve
wear resistance
• L 12.8" x W 11.3" x H 5"
Rubbermaid Commercial Products Code: 760
Website: www.rubbermaidcommercial.com
$&
'"
90.7 KG UTILITY CART
WITH 4“ (10.2 CM)
SWIVEL CASTERS
WAVEBRAKE®
35 QT SIDE
PRESS COMBO
• Easy-to-clean smooth surfaces
• User-friendly easy to grip handles
• L 33 5/8" x W 18 5/8" x H 37 3/4",
200 lb weight load
• High efficiency side
press wringer
• Lasts 58 times
longer than
comparative
wringers
• L 20.1" x W 15.7"
x H 36 1/2", 35 qt
capacity
$&
$&"
DIRTY WATER
BUCKET FOR
WAVEBRAKE®
COMBOS
• Separates dirty water
from clean water to
reduce risk of contamination
• L 14.1" x W 9.9" x H 14.1",
Mop capacity 18 qt
136.1 KG XTRA™
UTILITY CART
• Durable and sized to carry large loads
• Large shelves hold various equipment
and supplies
• L 40 5/8" x W 20" x H 37.8",
300 lb capacity (100 lb/shelf)
$&
CONVERTIBLE
UTILITY CART
$&
'"
WAVEBRAKE®
DOWN PRESS COMBO
• Tested to exceed 100,000
wringing cycles, side
press wringer performs
50,000 cycles
• Premium tubular steel
and structural web
molded plastic
• L 20.1" x 15.7" x H 36
1/2", 35 qt capacity
• Converts from a utility cart to a
platform truck in just seconds
• Innovative, patent-pending design
• L 45.2" x W 23.8" x H 34.4",
400 lb capacity
$&
HD 2-SHELF UTILITY
CART WITH LIPPED
SHELF (SMALL)
• Perfect for transporting materials,
supplies,and heavy loads in
almost any environment
• High density structural
resin construction
• L 39" x W 17 7/8" x H 33 1/4",
500 lb max capacity
• Easy-access bottom shelf
• Best-in-class casters are made to
meet demanding environments
• L 45 1/4" x W 25 7/8" x H 33 1/4",
500 lb max capacity
• Heavy duty wheels with swivel
capabilities provide for ease of mobility
• User-friendly solution for moving
heavy loads
$&"
$&"
HEAVY DUTY DOLLY,
PADDED DECK
HEAVY DUTY DOLLY,
FLUSH DECK
• One piece high impact molded polyethylene
• Steel reinforced rib design deck
• L 30" x W 18", 1,000 lb max capacity
• One piece high impact molded polyethylene
• Steel reinforced rib design deck
• L 30" x W 18", 1,000 lb max capacity
$&
$&
TRIPLE TROLLEY
PACKET PACK
HD PLATFORM TRUCK
(LARGE 30" X 60“)
• Efficiently transports large bulky loads
• Folds flat for easy storage
• L 32.5" x W 20.5", 500 lb max capacity
• Duramold™ precision engineered resin and
metal composite structure for unsurpassed
• durability and service life
• Textured deck surface reduces load slippage
• L 60" x W 30", 2,000 lb capacity
RUBB
BERMAID
$&
HD 2-SHELF UTILITY
CART WITH LIPPED
SHELF (MEDIUM)
$&&'
BRUTE® DOLLY FOR
2620, 2632, 2643,
2655 CONTAINERS
JANITORIAL AND SANITATION
$&
204
GOJO INDUSTRIES INC. Code: 622
Website: www.gojo.com
(
PURELL® INSTANT HAND SANITIZER
JANITORIAL AND SANITATION
• NXT® 1,000 ml refill kills
• No water or towels needed
99.99% of most common
• Specially formulated with
germs that may cause illness
moisturizers to leave hands
• Works in as little as 15 seconds
feeling soft and refreshed
GOJO® SUPRO
MAX™ CHERRY
GOJO®
CHERRY GEL
GOJO®
SUPRO MAX™
GOJO®
POWER GOLD®
• 2,000 ml Bag in Box Refill
• Cherry Hand Cleaner
• 2,000 ml Bag in
Box Refill
• Pumice Hand
Cleaner
• 2,000 ml Bag in
Box Refill
• Hand Cleaner
A highly effective,
fast-acting hand cleaner
for removing the heaviest
grease, tar and oil. No
harsh solvents. Contains
natural, non-irritating
scrubbing particles.
Apply to dry hands,
then rinse or wipe off.
• 130 Count Bucket
• Hand-cleaning towels
• For use in service
vehicles, on the
workbench, at the
job site and wherever
water is not available
GOJO®
FAST WIPES®
GOJO®
HAND MEDIC®
• 225 Count Bucket
• Hand-cleaning towels
• For quick cleanup of
light greases and oils
• 8 fl oz Bottle
• Professional Skin
Conditioner
GOJO® SCRUBBING WIPES
• Dual textured with a scrubbing side for
removing tough soils, and a
smooth side for
quick dirt absorption
• Extra large wipes for
superior cleaning capacity
• Contains skin conditioners
to help prevent dryness
and irritation
• For use anywhere heavy
duty cleaning is required
• No water needed
GOJO
205
• Freestanding stations
make PURELL® Instant
Hand Sanitizer available
anywhere
• Wellness display for employees and customers
• Place in high traffic areas
or where crowds gather
• Helps prevent the spread
of germs
• Approximately 1,800
applications per refill
GOJO®
FAST WIPES®
GOJO® CHERRY
GEL PUMICE HAND
CLEANER
• Gel-style heavy duty hand cleaner
with cherry fragrance and pumice
scrubbers
• Quickly cleans heavy
dirt, grease and oil
• pH balanced to
promote skin comfort
• Provides a quick, easy
and complete rinse
that leaves skin feeling
refreshed
TFX™
FLOOR STAND MINERAL GRAY
PURELL® TFX™
TOUCH FREE
DISPENSER
(
PURELL®
TFX™ 1200 ML
REFILL
(
GOJO
HAND
MEDIC
GOJO®
LUXURY
FOAM HAND
CLEANER KIT
• 5 oz Tube
• Professional
Skin
Conditioner
PART NO.
DESCRIPTION
5161-D2
FMX-12™ 1,200 ml Luxury Foam Kit,
1 dispenser and 1 refill included
5161-03
FMX-12™ 1,250 ml Luxury Foam Refill
• Ideal for washrooms
and break rooms
• Rich, gentle luxury
foam handwash
• Pre-lathered for
a convenient and
pleasing experience
• For general light
duty cleaning
PURELL® INSTANT HAND SANITIZER
PART NO.
DESCRIPTION
9606-24-CAN
2 fl oz pump bottle
9646-12-CAN00
12 fl oz bottle with dermaglycerin
9650-24-CAN
2 fl oz bottle with flip cap
PART NO. DESCRIPTION
PART NO. DESCRIPTION
9651-24-CAN00
4 fl oz bottle
6380-04
80 count individually wrapped
2352-15
6 fl oz bottle
9652-12-CAN00
8 fl oz pump bottle
6383-06
25 count canister
2354-08
10 fl oz bottle
9659-12-CAN00
12 fl oz bottle
6396-06
72 count canister
2356-04
1/2 gallon pump bottle
9674-12-CAN
8 fl oz pump bottle with aloe
6398-02
170 count bucket
2358-02
1 gallon pump dispenser
9770-12-CAN00
12 fl oz bottle with 70% alcohol
(
CAR-FRESHNER Code: 286
Website: www.little-trees.com
LITTLE TREES® 1-PAK
AIR-FRESHENERS
LITTLE TREE IN A CAN®
AIR-FRESHENER, 70 G
(2.5 OZ) AEROSOL CAN
PART NO.
DESCRIPTION
U1P-17366
Black Forest
U1P-10155
Black Ice
U1P-17343
Blackberry Clove
PART NO.
U1P-10318
Cinna-Berry
UAL-09055-CN
Black Ice
U1P-10317
Coconut
UAL-09017-CN
Coconut
U1P-10316
Green Apple
UAL-09089-CN
New Car
U1P-10433
Jasmin
UAL-09005-CN
Vanillaroma
U1P-10435
Lavender
U1P-10290
Leather
U1P-10228
Morning Fresh
U1P-10189
New Car Scent
U1P-10221
Ocean Mist
U1P-10319
Peachy Peach
U1P-10967
Piña Colada
U1P-10101
Royal Pine
U1P-10312
Strawberry
U1P-14325-CN
Sun-Washed Cotton
U1P-10105
Vanillaroma
U1P-10320
Watermelon
U1P-10311
Wild Cherry
• Little Tree In a Can® Air-Freshener
• 70 g (2.5 oz) aerosol can
• Same great fragrances in a can
DESCRIPTION
LITTLE TREES® VENT-CLIPP
AIR-FRESHENER,
4 UNITS PER PACKAGE
• Little Trees® Vent-Clip Air-Freshener
• Fits securely into all vent types
PART NO.
DESCRIPTION
U1P-17711
Cherry
U1P-17716
Crisp Apple
U1P-17750
Mountain Waterfall
U1P-17789
New Car
U1P-17719
Peaches and Cream
U1P-17705
Vanilla
JANITORIAL AND SANITATION
• Little Trees® Traditional Air-Freshener
• Freshens for up to 6 weeks
• Table includes our top 20, 1-paks
VENDING MACHINES FOR LITTLE TREES® TRADITIONAL
AIR-FRESHENERS, INCLUDES PRODUCT
DESCRIPTION
UVM-90002
1-column single-coin, electronic, includes 288 Little Trees®
UVM-90003
1-column multi-coin, electronic, includes 288 Little Trees®
UVM-90004
5-column single-coin, electronic, includes 864 Little Trees®
UVM-90005
5-column multi-coin, electronic, includes 864 Little Trees®
UVM-90001
1-column single-coin, mechanical, includes 288 Little Trees®
UVM-90000
5-column single-coin, mechanical, includes 864 Little Trees®
CAR-FR
RESHNER
PART NO.
206
FURGALE INDUSTRIES
Code: 208
Website: www.broom.com
BROOM HEADS ONLY, HANDLE SOLD SEPARATELY
STREET / BARN
BROOM HEAD
JANITORIAL AND SANITATION
PART NO. DESC.
PART NO. DESC.
PART NO. DESC.
0818H
18"
0618H
18"
5714H
14"
0824H
24"
0624H
24"
5716H
16"
0836H
36”
0636H
36"
ROUGH SWEEP
BROOM HEAD
2836H
36"
Metal broom brace for all push
brooms. Provides extra strength
to minimize handle breakage.
TAPERED
BROOM HANDLE
54” x 1-1/8” tapered handle
lacquered handle is ideal for
use with all floor squeeges
and street brooms.
J3306
54"
5360
60"
HD PUSHBROOM / INDOOR
• Medium to rough surfaces
• Dust and mid-weight debris
• Dry conditions
FU
URGALE IND
DUSTRIES
18" head
5524
24" head
60"
6054
54"
6060
60"
LOBBY
CORN
BROOM
HD CORN
BROOM
• Natural
Bristles
• 56”
handle
SYNTHETIC
LOBBY
BROOM
ECONOMY
MAGNETIC
BROOM
ANGLE
BROOM
Durable plastIc cap.
Ideal for sweeping
smooth surfaces.
30” synthetic angle broom ideal for use
with HC2532 Lobby Dust Pan
LARGE ANGLE
BROOM
• Professional quality
• Stiff synthetic fibres
• 15/16” x 48” handle
HD 14”
COUNTER
BRUSH
HD PUSHBROOM / OUTDOOR
• Medium to rough surfaces
• Dirt and heavy debris
• Wet conditions
PART NO. DESC.
PART NO. DESC.
454
9"
5618
18" head
13"
5624
24" head
458
207
PART NO. DESC.
6160
• Non-scratch
• 2 1/4” synthetic fibres
10” PREMIUM
MAGNETIC BROOM
48” metal handle with extra long
4 1/2” fibre and premium split
tip fibres. Ideal for sweeping both
light dirt and fine dust.
54"
48” metal handle with
3” plastic fibres. Ideal
for light sweeping of fine
dust and dirt.
PART NO. DESC.
5518
6154
&
30” corn
broom ideal
for use with
HC2532 Lobby
Dust Pan
PART NO. DESC.
Threaded broom handle is
lacqured and fits all acme
threaded broom heads has
metal tip for extra strength.
PART NO. DESC.
UNIVERSAL
BROOM BRACE
18"
24"
Threaded broom handle is
lacqured and fits all acme
threaded broom heads.
PART NO. DESC.
THREADED
BROOM HANDLE
WITH METAL TIP
THREADED
BROOM HANDLE
For commercial indoor and outdoor
use under wet and dry conditions such
as commercial, industrial or residential
use. Sweeps medium to heavy debris.
2824H
For indoor use under dry and wet conditions
such as factories, schools, commercial
buildings. Sweeps fine to medium debris.
For indoor use under dry conditions such
as warehouses, offices or hospitals. Sweeps
fine debris such as dust, sand and light dirt.
For outdoor use under wet or
dry conditions, sweeps heavy
debris such as gravel, mulch
or heavy dirt.
2818H
TAMPICO BROOM HEAD
SMOOTH SWEEP BROOM HEAD
FURGALE INDUSTRIES
Code: 208
Website: www.broom.com
URINAL SCREEN
WITH BLOCK
URINAL BLOCK
URINAL SCREEN
Non Para Block cleans and
deodorizes with every flush
Urinal screen will block waste
build up in urinals.
Non Para Block cleans and
deodorizes with every flush.
Screen will block waste build
up in urinals.
PART NO. DESC.
PART NO. DESC.
PART NO. DESC.
PART NO. DESC.
HC0392
Single dispenser
HC0004
3 oz
HC0001BG
Bubble gum
HC0003
4 oz
HC0396
Double dispenser
HC0005
4 oz
HC0001CH
Cherry
HC0010
3 oz
Universal towel dispenser with built
in lock and key. Accepts most jumbo
rolls of toilet paper.
SOAP
DISPENSER
Universal soap dispenser
with sight window and
large push bar.
LONG
HANDLE
LOBBY
DUSTPAN
ECONOMY TOILET
BOWL BRUSH
AND CADDY
PAPER TOWEL
DISPENSER
TOILET
BOWL SWAB
TOILET
PLUNGER
Universal paper towel
dispenser with push
lever. Accepts most
rolled paper towels.
Acid resistant acrylic
yarn releases liquid
quickly. Can be used in
both toilets and urinals.
Heavy duty plunger
with wood handle.
Rubber cup provides
strong suction for
movement of all
types of blockages.
Long handle dustpan
is constructed of
heavy gauge plastic
and has snap lock
feature for easy
dumping. Ideal for all
commercial uses.
JANITORIAL AND SANITATION
TOILET TISSUE
DISPENSER
JUMBO
DEBRIS PAN
12” PLASTIC
DUSTPAN
12” METAL
DUSTPAN
One piece plastic
construction with deep
pan designed to hold all
fine debris. Ideal for all
sweeping applications.
Heavy duty, one piece
steel construction with
bevelled edge. Extremely
durable and ideal for all
sweeping applications.
HD 16”
METAL
DUST PAN
• 9” handle
• Black
HC0045/44/43
WASTE CONTAINER
WITH LID
PART NO. DESC.
HC0045
6 gal
HC0044
12 gal
HC0043
15 gal
FU
URGALE IND
DUSTRIES
• 12” plastic pan
• 25” metal handle
• Snap-locks for use
and releases to
empty or carry
208
FURGALE INDUSTRIES
Code: 208
Website: www.broom.com
JANITORIAL AND SANITATION
9” HEAVY
DUTY TRIGGER
SPRAYER
PART NO. DESC.
HC0025
24 oz
HC0033
32 oz
&(
AUTOMOTIVE
AND MARINE
WASH BRUSH
ACID RESISTANT
WASH BRUSH
• Flow-through plastic head with vinyl bumper,
split-tip, acid resistant tampyl
• Ideal for washing cement trucks
10” head, 2.5” trim
• For use with acid
resistant and auto and
marine wash brushes
• Extends to 56”
• Easy access, thumb
action flow control lever
(control water flow with
thumb)
PART NO. DESCRIPTION
685508
Plastic head, 8” head, 2.5” trim
685510
Plastic head, 10” head, 2.5” trim
885510
Tri-level head, 3 washing angles,
10” head, 2.5” trim
PART NO. DESCRIPTION
686510
FLOW
THROUGH
EXTENSION
HANDLE FOR
ALL WASH
BRUSHES
• Automotive and marine wash brush
• Flow-through plastic block head with vinyl bumper,
non-scratch split-tip nylon fibres
MOSS FOAM RUBBER
FLOOR SQUEEGEE
• 30” x 1 1/2” reversible blade
• Light to medium debris
• Smooth to semi smooth surfaces
PART NO. DESC.
FU
URGALE IND
DUSTRIES
209
Durable plastic withstands any harsh
enviroment. Comes with volume
measurements and WHIMIS label.
Green / white trigger with
9” dip tube equipped
with filter screen. Trigger
adjusts to provide fine mist
to steady stream. Ideal for
all heavy duty applications.
9” MULTI PURPOSE
TRIGGER SPRAYER
Red / white trigger with 9” dip tube
equipped with filter screen. Trigger
adjusts to provide fine mist to
steady stream.
BOTTLE WITH WHIMIS LABEL
25322
22”
25330
30”
5360
Wood handle
for floor
squeegees,
15/16” x 60”
PART NO. DESC.
3930
8" head
3940
10" head
WINDSHIELD SQUEEGEE
20” handle included. Windshield squeegee
heads with net covered scrubbing sponge
and metal frame.
WINDOW WASHER
• Window washer with plastic T-handle and
acrylic washing sleeve
• Order extension poles separately
TELESCOPIC
ALUMINUM
LOCKABLE
EXTENSION POLE
PART NO. DESC.
• 2 piece (HC0215-HC0217)
or 3 piece (HC0218HC0221)
• Up to 30’ in length
• Made out of durable
aluminum for long life
• All poles are telescopic
and lockable
HC0215
4’ reach
HC0216
10’ reach
HC0217
12’ reach
HC0218
15’ reach
HC0219
20’ reach
HC0220
26’ reach
HC0221
30’ reach
STAINLESS STEEL
WINDOW SQUEEGEE
• Replaceable rubber
blades available
• Extension poles
sold separately
PART NO. DESC.
HC9100
12”
14”
HC9200
14”
HC0097
16”
HC9300
16”
HC0098
18”
HC9400
18”
PART NO. DESC.
HC0096
FURGALE INDUSTRIES
Code: 208
Website: www.broom.com
4-ply rayon deck mop
with 54” handle is highly
absorbant and is ideal for small
mopping applications.
PART NO. DESC.
D7510
#10
D7516
#16
11 QT ROUND
PLASTIC PAIL
17 QT ROUND
PLASTIC PAIL
Economy pail is ideal
for all light mopping and
washing jobs. Has an
easy pour spout, steel
handle and plastic grip.
Heavy duty plastic pail has
an easy pour grip molded
into the base. Built with a
heavy duty steel handle and
plastic grip.
WET FLOOR SIGN
Plastic construction,
two-sided fold-out caution sign,
trilingual message
JANITORS CART
'"
17 QT DOUBLE
BUCKET
21 QT DOWNPRESS
WRINGER AND
BUCKET COMBO
Dual cavities keep rinse
water clean. Heavy duty
plastic construction is
ideal for light commercial
use like restaurants and
institutions.
• High capacity cleaning
cart carrys a wide variety
of cleaning tools
• Plastic construction with
durable vinyl bag
• Available in grey (gy) or
blue (bl)
Durable plastic construction. Wringer
will accommodate up to a 20 oz
mop head. Ideal for small business,
restaurant and home use.
JANITORIAL AND SANITATION
DECK MOP
'"
Pail has molded grip on base for easy pour
and steel handle with plastic grip. Ideal for
small mopping jobs and is used with all
deck mops.
PART NO. DESC.
800
800YE
Blue
Yellow
MOP HEAD
WINDOW
WASHING
BUCKET
• Window washing
bucket designed to fit
window cleaning tools
• Complete with filter
screen
PART NO. DESCRIPTION
8016
16 oz
8020
20 oz
8024
24 oz
54054HFG-2
54” easy-change
mop handle for
above mop heads
35 QT MOP BUCKET
FU
URGALE IND
DUSTRIES
15 QT PLASTIC PAIL
WITH WRINGER
210
ALLIANCE MERCANTILE Code: 725
Website & Online Catalogue: www.alliancemercantile.com
ALL PURPOSE
MICROFIBER CLOTH
JANITORIAL AND SANITATION
SOL-VEX NITRILE GLOVES
• Protects against many chemicals
and solvents
• Resists cuts, snags and punctures
• Outperforms conventional rubber gloves
• LATEX FREE - A safe alternative for
people with allergies to latex
PART NO. DESCRIPTION
37001
Small
37002
Medium
37003
Large
INDUSTRIAL HEAVY
DUTY LATEX GLOVES
•
•
•
•
•
50% thicker than standard gloves
Industrial strength
Highly chemical resistant
Extra length for added protection
Recessed diamond grip for added
grip on wet and dry surfaces
GLASS MICROFIBER CLOTH
• Perfect for dusting and cleaning windows and
mirrors on your car, truck, boat or camper!
• 32 cm x 32 cm
CLOROX ANGLE
BROOM AND DUSTPAN
• Rubber bumpers prevent marring of walls
• Angled bristles helps reach corners and edges
• Large dustpan with rubber lip to capture more dirt
PART NO. DESCRIPTION
02088
Medium
02089
Large
02090
X Large
WAXED 13”
NEOPRENE COATED
BI-COLOUR HEAVY
DUTY GLOVES
• Superior protection from hot or cold
• Superior resistance to chemical
deterioration
• Industrial strength
PART NO. DESCRIPTION
ALLLIA
ANCE MER
RCANTILE
211
• No need for harmful chemicals,
fumes or vapours – just add water!
• Machine washable
• Holds more dust and dirt than standard
cleaning cloths
• Extremely fine microfiber; leaves zero
streaks, scratches and marks
• 40 cm x 40 cm
20907
Medium
20908
Large
20909
X Large
CLOROX BUTTERFLY MOP
• Integrated antimicrobial protection
• Cellulose blend sponge adds absorbancy
• Scubber bristled for tough dirt and stains
CLOROX CORNER TOILET
BRUSH & HOLDER
• Soft rubber grip for ultimate control and comfort
• Integrated antimicrobial protection
• Design allows brush and caddy to be tucked
away in the corner
CLOROX HEAVY DUTY
ULTIMATE PVC GLOVES
•
•
•
•
•
•
PRINCESS PREMIUM
FLOCKLINED LATEX
GLOVES
•
•
•
•
Anti-bacterial formulation
Thicker and long lasting
Soft, comfortable lining
Patented raised gripper patterned
palm for superior gripping power
00831
Medium
00832
Large
00833
X Large
+:86O8$67//
•
•
•
•
Multi-Purpose
Easy to Clean
Strong and durable
6” x 3.5” x 1”
• Excellent for tough
and dirty jobs
• 6” x 4” x 0.25”
KLEEN GLO
STAINLESS STEEL
SCOUR 3 PACK
• Easy to Clean
• Will not rust
• Dishwasher safe
KLEEN GLO 8G
POLY SCOURS
3 PACK
• All-purpose
• Excellent cleaning without
scratching delicate surfaces
KLEEN GLO ULTRA
CLOTH REGULAR
2 PACK
• Easy to use
• Holds liquid in volume
more than 10x its weight
• Machine washable
• 38 cm x 40 cm
• Will not scratch or damage any surface
PART NO. DESCRIPTION
Ultimate Guard Technology™ for maximum protection
99209
Excellent protection against household cleaners
99210
100% cotton lining for added comfort
Machine washable
Antimicrobial protection to inhibit growth of bacteria on the glove surface
LATEX FREE - A safe alternative for persons with allergies to latex
S/M
L/XL
VERSATOUCH VINYL
DISPOSABLE GLOVES 10 PACK
KLEEN GLO
JUMBO FOAM
SPONGE
Great sensitivity and dexterity
Fits either hand
Multi-purpose
LATEX FREE - A safe alternative for people with
allergies to latex
KLEEN GLO
NYLON
SCOURING PADS
4 PACK
•
•
•
•
PART NO. DESCRIPTION
KLEEN GLO
KITCHEN
SPONGE 2 PACK
• Ideal for cleaning
large surfaces
• 5” x 2.5” x 9.63”
Index
Abrasives .................................... 114
Battery Jumpers ..........................106
Carburetors ................................ 124
Absorbents..................................141
Battery Load Testers ..................... 42
Carpet Cleaner........................... 178
Accident Prevention Tags ........... 142
Battery Switches.......................... 112
Adapters .................... 104, 108, 118,
122, 127, 196
Battery Terminals ......................... 107
Cartridge Rolls and
Spiral Bands................................ 114
Additives ............176, 180, 187, 191,
192, 197, 199
Bead Breakers ............................. 57
Adhesives................... 183, 186, 190
Beacons .......................... 94, 95, 101
Bead Holders ............................... 57
Carts ................. 1, 10, 203, 204, 210
C-Clamps ..................................... 33
Chain ..................................... 72, 88
Bearings............................... 75, 120
Chain Saws .................................. 13
Belt Dressing and Conditioner ....181
Chamois ..................................... 200
Belts ................................... 124, 129
Chisels ......................................... 46
Bits ............................. 32, 33, 35, 36
Chop Saw Wheels ....................... 115
Blades ...... 3, 28, 33, 50, 52, 59, 124
Chop Saws ................................... 24
Air Drills ....................................... 54
Blo-guns....................................... 58
Circuit Breakers ................... 109, 112
Air Fresheners .................... 179, 206
Body Filler .................................. 149
Circular Saw Blades ......................31
Air Hammers ................................ 54
Body Repair Kits .................... 17, 20
Circular Saws ......................... 23, 24
Air Hose ................................. 8, 127
Bonding Compounds ......... 183, 186
Clamps............ 33, 49, 117, 118, 130
Air Manifolds ................................ 58
Booster Cables ........................... 107
Clay Bars.................................... 188
Air Ratchet Wrenches ................... 54
Boots and Accessories ...... 146, 148,
150, 159
Cleaners ...... 27, 173, 174, 178, 179,
180 183, 184, 185, 188, 189, 190,
193, 194, 195, 197, 198, 202, 205
Air Assemblies ............................106
Air Brake Hoses ..........................121
Air Brake Male Connectors..........121
Air Brake Service Kit .................. 122
Air Die Grinders ........................... 54
Air Springs ............................. 77, 78
Air Tool Lubricant .............. 130, 174,
175, 192
Brackets ....................................... 37
Brake Bleeder/Evacuators .............. 9
Cleaning Wipes .......... 179, 193, 205
Clevis Hooks ................................ 73
Air Tools ....................................... 54
Brake Controls ............................. 68
Alternators ..................131, 132, 133,
134, 135
Brake Repair/Replacement
Components ................................ 75
Anchor Shackles .......................... 73
Brake Cleaner .................... 174, 198
Anti-Fog Treatment ..................... 195
Brass Fittings.......................121, 122
Anti-Seize ................... 182, 187, 193
Brass Valves ................................. 79
Assembly Compounds ............... 187
Breathers ................................... 136
Assembly Lube .......................... 192
Brooms ............................... 207, 211
Assortment Kits ............................ 80
Buckets ............................... 204, 210
ATF Fluid .....................................191
Bug Killer ................................... 173
ATF Refill Systems .......................... 9
Bug Remover ............................. 199
Auger ........................................... 13
Butt Connectors .......................... 107
Auxiliary Lamps ............................ 97
Cab and Cargo Heaters .............. 116
Axes ..............................................61
Cable ....................................86, 108
Back Up Alarms .......................... 101
Cable Cutters ............................... 89
Back Up Lamps ........................... 95
Cable Sleeves .............................. 89
Backpack Blowers ....................... 13
Cable Stops ................................. 89
Ball Stud Kits ................................ 37
Ballasts................................... 90, 92
Cable Supports and
Accessories .................................106
Batteries ......................................105
Cable Ties ...................................108
Coveralls ............................ 164, 165
Battery Boxes ............................... 63
Canisters ........................................ 6
Creepers ...........................10, 18, 40
Battery Chargers ............. 41, 42, 105
Caps ............................................ 75
Crimpers ...................................... 27
Battery Cleaner .......................... 173
Car Wash ........... 179, 184, 188, 195
Cultivators ...............................13, 61
Battery Isolators .......................... 112
Carburetor Cleaner .................... 180
Cut-off Wheels ............................. 113
Cloths .................................. 200, 211
Clutch Kit Parts and Accessories .. 38
Coiled Air Brake
Tubing Assemblies ......................121
Cold Weather Engine Heaters ..... 116
Cold Weld Products ................... 186
Compression Test Kits .................... 9
Compressor Maintenance Kits ....... 5
Compressors .............................. 5, 6
Conditioning Discs ..................... 149
Connectors................................... 99
Coolant Test Strips ...................... 189
Coolers......................................... 53
Copper Tubing Coil .................... 175
Cord Ends ...................................108
Cord Reels ....................................91
Corner Protectors ......................... 73
Couplers .................. 20, 58, 84, 127
i
Cutters ...... 3, 27, 28, 34, 44, 46, 48,
49, 51, 52, 55, 59, 89
Filters ................ 4, 5, 6, 58, 83, 124,
136, 149, 158
Grinding Wheels ......................... 113
Cutting and Welding Outfits ............ 1
Fire Extinguishing....................... 176
Hacksaws ..................................... 50
Cutting Fluid............................... 174
Fire Retardants ........................... 176
DC Welders .................................... 1
First Aid ...................................... 158
Halogen Lamps ........ 67, 90, 97, 98,
102, 103
Deadbolt Locks ...........................140
Fittings ..............20, 58, 80, 121, 128
Hammers ............................... 46, 52
Degreasers ............... 174, 183, 194,
198, 202
Flashlights .................. 23, 28, 93, 95
Hand Cleaners ........... 183, 193, 205
Floor Markings/Labels ................ 144
Hand Pads ................................. 149
Detailers ..................... 179, 184, 188
Floor Signs .......................... 203, 210
Hand Pumps ................................ 26
Diesel Starting Fluid
Installation Kits ............................ 116
Fluid Dispensing Systems .............. 9
Hand Sanitizers .......................... 205
Fluid Evacuators ............................ 9
Hand Warmers ............................. 68
Fluid Receivers............................... 8
Hard Hats................................... 157
Flush Mount Lights....................... 96
Hatchets ....................................... 52
Forks .............................................61
Hats ............................................161
Fuel Containers and
Accessories .................................. 63
Head Lamps ............... 28, 93 97, 99
Drain Pans ................................... 63
Drill Bits ...................... 32, 33, 35, 36
Fuel Conversion Kits..................... 22
Drills ....................................... 13, 23
Fuel Cylinders .............................. 39
Headlight Restoration
Kits ..................................... 184, 188
Drivers............ 28, 33, 35, 45, 46, 52
Fuel Injector Cleaner .......... 180, 197
Driveway Markers ....................67, 70
Fuel Meters .................................. 26
Drop Sheets ................................201
Fuel Nozzles................................. 26
Dryers ............................................ 6
Fuel Pumps .................................. 26
Dust Pans.................... 203, 208, 211
Fuel Siphon/Pump ....................... 63
Duster ........................................ 200
Fuel Treatment ....173, 185, 191, 197
Ear Protection ............ 155, 156, 157
Funnels .................................. 63, 83
Edgers ......................................... 13
Measurers .................................... 83
Electrical Assemblies...................106
Fuse Blocks.................................109
Electrical Connectors ..................106
Fuse Holders ...............................109
Emergency Eye Wash
Products..................................... 158
Fuses ..........................................109
Enamels .............169, 170, 171, 172
Garbage Bags ............................201
Engine Cranes ............................. 17
Garden Scissors ........................... 55
Engine Oil Stop Leak .................. 192
Gas Apparatus Outfits .................... 1
Engine Stands .........................10, 16
Gas Caps ................................... 130
Engine Treatments ............. 197, 199
Gasket Makers ................... 183, 193
Entry Locks .................................140
Gauges .......................................102
Epoxy ......................................... 186
Gear Pumps ................................. 26
Ethanol Fuel Treatment............... 173
Gladhand Seals...........................106
Evaporative Coolers and
Accessories .................................. 60
Glass Cleaners .......... 173, 179, 188,
195, 202
Exhaust Products .................. 22, 118
Extendable Brushes ................... 200
Gloves ................. 27, 137, 138, 139,
152, 161, 211
Extension Cords .................... 91, 104
Grass Shears................................ 55
Extension Poles .......................... 209
Grease ........ 82, 130, 173, 175, 177,
178, 182, 187, 189, 193, 198
Discs ....................113, 114, 115, 149
Disc Sanders ................................ 25
Dollys ............................. 17, 19, 204
Dome Lamps ............................... 96
Eye Protection .. 1, 27, 153, 154, 155
ii
Galvanizing Compounds ............ 198
Hacksaw Blades .......................... 50
Head Protection ................... 27, 157
Heat Shrink
Sleeves ...................32, 107, 110, 144
Heaters ...................................21, 22
Hitch Extensions .......................... 85
Hoes .............................................61
Hook and Loop Discs.................. 114
Hooks....................69, 71, 72, 73, 87
Hook-Up Kits................................ 22
Hose Clamps ............................. 130
Hose Hangers .............................. 56
Hose Menders ............................. 56
Hose Reel Assemblies.................... 8
Hose Timers ................................. 56
Hoses................. 8, 20, 55, 127, 128
Hourmeters .................................102
Hub Kits ....................................... 76
Hydraulic Cylinders ...................... 20
Hydraulic Fittings ....................... 128
Hydraulic Fluid ........................... 175
Hydraulic Hose .......................... 128
Hydraulic Hose Equipment ........ 128
Hydraulic Oil Booster ..................191
Ice Scrapers ........................... 14, 68
Impact Drivers ........................ 23, 54
Impact Wrench ....................... 25, 54
Inflator Gauges..................... 58, 196
Inserts ........................................ 123
Fall Protection ............................ 157
Grease Fittings and
Accessories .................. 8, 75, 80, 82
Feet Warmers ............................... 68
Grease Guns ...........7, 8, 81, 82, 130
Irons ..............................................51
Fiber Discs .................................. 114
Grease Pumps ......................... 8, 82
Jack Stands ......................10, 15, 16
Field Marking Paints ................... 167
Grinders ....................................... 25
Jackets ....... 147, 148, 162, 163, 165
Files ............................................. 50
Grinding Discs .................... 115, 149
Jacks.........10, 15, 16, 17, 18, 19, 86
Inverted Marking Paints...... 167, 168
Jeans ......................................... 164
Nut Drivers ............................. 45, 46
Quick Links .................................. 73
Junction Box ...............................106
Octane Booster .................. 180, 197
Radiator Treatment ..................... 180
Key Tags .....................................171
Odour Eliminators ....... 176, 179 206
Rain Repellent ............................ 195
Knee Pads ....................................31
Oil Stabilizers ...............................191
Rainwear .................................... 148
Knives ................................ 3, 52, 59
Oil Supplements ......................... 187
Rakes ............................................61
Label Makers ....................... 32, 143
Oil Treatments ............................ 180
Ramps ................................... 18, 69
Labels .................................. 32, 145
Oils ...................... 13, 130, 174, 175,
178, 191, 192, 198
Ratchet Straps ...................69, 71, 72
Overalls .............. 147, 163, 164, 165
Oxygen Cylinders ........................ 39
Ratchets .............. 15, 35, 36, 43, 46,
48, 49, 51, 54, 89
Padlocks .............................140, 142
Rebar Benders ..............................51
Paint ......................... 167, 168, 169,
170, 171, 172
Batteries ......................................105
Paint Brushes and Rollers .......... 166
Reciprocating Saws................ 23, 25
Paint Strippers ............................ 183
Recycle Bins ................................ 63
Pants .......... 147, 148, 163, 164, 165
Reel Mowers ................................ 55
Lens Cleaner .............................. 155
Paper Dispensers ....................... 208
Reflective Markers .........................70
Levels ............................................31
Parts Cleaner ..... 174, 183, 194, 198
Reflector Shield ...........................103
Lift Supports ................................. 37
Patch Repair ................ 79, 189, 196
Relays ...................................97, 109
Lifting & Pulling Tools .............. 11, 12
Pavement Striping Paints .... 167, 168
Respiratory Protection ........ 149, 158
Light Bars..................67, 94, 95, 100
PCV Valves ................................. 136
Rivets ......................................... 123
Light Bulbs ......................90, 92, 103
Penetrants .. 177, 178, 189, 198, 199
Rocker Switches .......................... 112
Light Sand Discs ......................... 114
Picks ............................................ 62
Roof Rakes ................................... 14
Linear Edges.................................31
Pincers ......................................... 49
Rope .......................................... 152
Load Binders .......................... 72, 89
Pinch and Wrecking Bars ..............61
Rope Rings .................................. 66
Lock Combo Sets ........................140
Pipe Cutters ................................. 48
Rust Treatment ....................172, 181
Lock De-Icer............................... 175
Placards ............................. 144, 145
Safety Boots ............... 146, 148, 159
Lock Fluid .................................. 175
Plasma Cutting Systems ................. 1
Safety Clothing ........... 147, 157, 165
Lockout Products ................140, 142
Pliers ........ 27, 28, 33, 34, 45, 46, 49
Loom ...........................................108
Plow Systems ................................ 11
Safety Warning Lights ..... 67, 94, 95,
96, 100, 101
Louvers ........................................ 60
Plugs .......58, 79, 104, 106, 108, 119,
122, 123, 156, 157, 186, 196
Salt Spreaders (Walk/Tailgate) ...... 67
Pole Saws..................................... 13
Scissors ............................ 28, 55, 59
Polish ......................... 173, 188, 189
Scouring Pads............................. 211
Polishing Tools..... 184, 188, 200, 211
Scrapers................................. 14, 68
Lumber Crayons ........................... 33
Poly Sheeting ..............................201
Scratch Removal ................ 184, 188
Magnetic Heaters ........................ 116
Power Inverters ........................... 111
Maintenance Pads ......................141
Power Steering Fluid ...................191
Screw Drivers .................. 28, 33, 35,
45, 46, 52
Markers .......................................171
Power Steering Stop Leak .......... 192
Screwdriver Bits ......... 32, 33, 35, 36
Mechanic Seats.................10, 18, 40
Power Transmission Belts ........... 129
Sealants ......181, 186, 190, 193, 196
Metal Cleaners ........................... 189
Pressure Switches .......................102
Seals .................................... 75, 120
Microfiber Cloths ................. 200, 211
Primers....................................... 172
Shears ................................ 3, 48, 55
Mig Welders ................................... 1
Print Ribbons ............................. 144
Shirts .................. 147, 160, 163, 165
Minibars ................................. 94, 95
Propane Cylinders ....................... 39
Shoes ................................. 146, 159
Mitre Saws.................................... 24
Protectant ........... 179, 188, 197, 198
Shop Presses ..........................10, 17
Mops ....................................210, 211
Pruners ........................................ 55
Shop Rolls ................................... 115
Motor Treatment ................. 180, 199
Pry Bars ................................. 44, 46
Shoulder Stud Kits........................ 37
Muffler Products .......................... 117
Pulley Blocks ................................ 88
Shovels................................... 14, 62
Multi-Tools ................................ 3, 28
Punches ....................................... 46
Shrink Tubes ..........32, 107, 110, 144
Nozzles ........................................ 56
Putty........................................... 190
Signs ........... 142, 145, 158, 204, 210
Lacquers .................................... 172
Ladders .................................. 29, 30
Laminated Discs ......................... 113
Lawn Mower Blades ................... 124
Leather Cleaners ............... 150, 179,
184, 188
LED Flashlights ................ 28, 93, 95
LED Lights .....23, 28, 91, 93, 94, 95,
96, 98 100, 101, 103
Lower Radiator Heaters ............... 116
Lubricants .... 82, 130, 173, 174, 175
177, 178, 181, 182, 185,
187, 189, 191, 192, 198
Ratcheting Drivers ........................ 35
Receiver Pull/Hitch Pins ............... 85
Saws ................................ 23, 24, 25
iii
Silencers .................................... 189
Tarps ............................................ 69
Vent Kits ....................................... 22
Silicones .... 150, 172, 173, 175, 177,
178, 182, 189, 198
Temperature Senders ..................102
Vices and Grips............................ 33
Temperature Switches .................102
Sledge Hammers ..........................61
Thermal Underwear ................... 160
Wash Brushes and
Handles ............................. 200, 209
Slings ........................................... 73
Thermostats ......................... 22, 130
Slip Hooks .................................... 73
Thread Repair Products ............. 123
Snips .......................... 33, 44, 46, 48
Threadlocker .......................181, 193
Snow Brushes .............................. 68
Tilt and Platform Trucks ...... 203, 204
Snow Shovels ............................... 14
Tire Cleaners ...... 179, 184, 188, 197
Snowplow Parts ............................ 67
Tire Gauges ......................... 58, 196
Soap Dispensers ................ 205, 208
Tire Inflators and Pumps ............ 196
Sockets ..... 43, 46, 49, 106, 108, 109
Tire Irons ...................................... 57
Socks .........................................151
Tire Mount/Demount Tools ........... 57
Solder and Accessories......1, 21, 39,
51, 107
Tire Repair ........................... 79, 196
Soldering Guns ............... 39, 51, 107
Solenoids .................... 107, 112, 124
Solid State Modules ................... 124
Sorbents .............................141, 142
Spark Plug Repair Sets .............. 123
Spark Plugs................................. 119
Spill Containment Kits ................ 142
Sponges.............................. 200, 211
Tires ..................................... 87, 124
Toilet Bowl Cleaner ..................... 178
Toilet Brushes ...................... 208, 211
Toilet Plungers ............................ 208
Tool Carts ..............................10, 204
Tool Sets ....................................... 49
Toolboxes ..................................... 64
Torch Heads ................................. 39
Sprayers ....................................... 55
Torch Kits ..................................... 39
Sprinklers ..................................... 56
Torches............................ 21, 51, 107
Squares.........................................31
Torque Tools ........................... 44, 46
Squeegees ......................... 200, 209
Traffic Directors and Arrows.......... 94
Stainless Steel Cleaners .... 173, 189,
194, 198
Trailer Balls .................................. 84
Stands .........................10, 15, 16, 18
Starters ........131, 132, 133, 134, 135
iv
Tire Sealants............................... 196
Trailer Connectors and
Adapters .........................64, 84, 108
Wash Mitts .................................. 200
Waste Containers ......... 63, 203, 208
Water Removers ......................... 180
Wax Applicators ......................... 200
Waxes ........................ 184, 188, 195
Weatherproof Receptacles .......... 116
Welding Electrodes ........................ 2
Welding Helmets ...................... 1, 27
Welding Tool Accessories ..... 1, 2, 27
Wheel and Hub Parts ................... 76
Wheel Brushes ........................... 200
Wheel Chocks .............................. 65
Wheel Spinners ............................ 82
Wheel Weights ............................. 79
Wheelbarrows .............................. 62
Wheels ................................. 87, 124
Winch Bars................................... 72
Winch Straps .................................71
Winches ............................ 11, 12, 72
Winching Accessory Kits ......... 11, 12
Wiper Blades.............. 125, 126, 195
Wipers ........................................ 200
Wire.............................................108
Wire and Cable Markers............. 144
Wire Brushes ............................... 115
Wire Strippers......................... 27, 52
Wiring Devices ............................104
Strap Winders .............................. 57
Transmission
Supplements .............. 187, 192, 199
Straps..........................69, 71, 72, 74
Trigger Sprayers ......................... 209
Work Lights ....91, 93, 94, 95, 96, 97,
98, 99, 100, 101 103, 104
Striking Tools ...............45, 46, 52, 61
Trimmer Lines ............................ 124
Wrecking Bars ...............................61
Strip Discs ................................... 115
Trimmers ...................................... 13
Striping Wands and Machines.... 168
Trolleys ....................................... 204
Wrenches .................... 3, 25, 34, 43,
44, 46, 49, 54
Strobe Lights .............67, 94, 95, 100
Truck Bed Coatings.................... 172
Suspension Parts ............. 75, 77, 78
Truck Wash ................................ 185
Switches .........68, 102, 107, 112, 124
T-shirts ................................ 147, 163
Swivel Fittings............................... 58
Tungsten Carbide Burs ................ 115
Tank Heaters ......................... 21, 116
Twin Clevis.................................... 73
Tape ................... 33, 47, 70, 74, 107,
145, 149, 183, 190
Twine .......................................... 152
Tape Dispenser ............................ 74
Urinal Screens............................ 208
Underwear ................................. 160
Tape Measures ............................. 47
Utility Carts ................................. 204
Taps and Dies .............................. 32
Utility Knives....................... 3, 33, 59
Tarp Straps ......................69, 72, 108
Vacuums and Accessories ............. 4
Don’t see it? Ask!
All product descriptions in this catalogue are intended as a general guide and may change without notice. All descriptions in this publication present only general particulars of the
goods to which they refer and shall not form part of any contract. The information in this catalogue may contain technical inaccuracies or typographical errors.
All rights reserved. Products may not be exactly as shown.
BUILT TO DO MORE
The Safety &
Warning Light
Specialists!
www.swscanada.com
TM

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project