part number: j101sfg100

part number: j101sfg100
PART NUMBER: J101SFG100
DESCRIPTION: Carbon Fiber Trunk Trim Cover,
Impreza Sedan
KIT CONTENTS:
Instructions x 1
Alcohol Wipes x 2
Carbon Fiber Trunk Trim x 1
TOOLS REQUIRED:
Alcohol Wipes
Cloth for cleaning surfaces
INSTALLATION PROCESS:
1) ALWAYS DRY FIT BEFORE INSTALLATION TO
ENSURE PROPER LOCATION AND FIT.
Fig. A
2) Recommended temperature range for installation is
16-43 °C (60-110 °F). If temperature is outside of this
range, bring car into appropriate environment to achieve
proper installation temperature.
CENTER POINTS
3) Use alcohol wipe to clean factory chrome trunk trim
ensuring removal of all contaminants such as dirt, dust or
fingerprints and allow surface to dry.
Fig. B
PEEL BACK TAPE LINER
4) Locate the center points marked on your product with
masking tape.
5) Peel back red tape liners to expose enough adhesive to
tack part in place and allow enough liner outside of the
part in order to remove during installation.
Fig. C
Carbon
arbon Fiber Trunk Trim Cover
6) Line both center point tape guides up with the design feature
on vehicle as shown in Fig. A. Slide the part down so that it is
evenly resting on the top of the chrome strip. Once in
position, peel back the remaining tape liner as shown
in Fig. B.
7) Using both hands, apply firm and even pressure
(30 psi) across carbon fiber trunk trim cover for 12
secs. to ensure it adheres to the factory chrome trim as
shown in Fig. C.
PART NUMBER
J101SFG100
ISSUE
1
DATE
07/02/09
APPLY FIRM
& EVEN PR
ESSURE
SUBARU OF AMERICA
PAGE
1/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement