Docking Digital Music System With Night Light For

Docking Digital Music System With Night Light For
Docking Digital Music System With Night
Light For iPod and iPhone
USER MANUAL
JiMS-185i
(iPod/iPhone Not Included)
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
DEAR JENSEN® CUSTOMER
Selecting fine audio equipment such as the unit you've just purchased is only
the start of your musical enjoyment. Now it's time to consider how you can
maximize the fun and excitement your equipment offers. This manufacturer and
the Electronic Industries Association's Consumer Electronics Group want you
to get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion
and, most importantly, without affecting your sensitive hearing. Sound can be
deceiving. Over time your hearing "comfort level" adapts to higher volumes of
sound. So what sounds "normal" can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly,
and without distortion.
Once you have established a comfortable sound level:
! Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in
the future. After all, we want you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new sound equipment will
provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and
the
Electronic
Industries
Association's
Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise.
Customer's Record:
The serial number of this product is found on its bottom cover. You should note
the serial number of this unit in the space provided as a permanent record of
your purchase to aid in identification in the event of theft of loss.
Model Number: JiMS-185i
Serial Number:
1
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings listed
in these instructions and on the unit.
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Only use attachments / accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for long
periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
12. This appliance shall not be exposed to dripping or splashing water and that
no object filled with liquids such as vases shall be placed on the apparatus.
13. Power Sources – The appliance should be connected to a power supply
only of the type described in the operating instructions or as marked on the
appliance. Do not overload wall outlet.
14. Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
15. Do not attempt to dismantle, open or repair this product yourself. If a fault
occurs, seek advice from your local qualified service technician or contact
the distributor via the telephone number at the back of this instruction
manual.
16. Caution marking and nameplate are located on bottom of product.
IMPORTANT NOTES
Avoid installing the unit in locations described below:
!
Places exposed to direct sunlight or close to heat radiating appliances such
as electric heaters.
!
Places subject to constant vibrations.
!
Dusty, humid or moist places.
2
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
PROTECT YOUR FURNITURE !
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from
non-migrating rubber material specially formulated to avoid leaving any marks
or stains on your furniture. However certain types of oil based furniture polishes,
wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften,
and leave marks or a rubber residue on the furniture. To prevent any damage
to your furniture we strongly recommend that you purchase small self-adhesive
felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber 'feet' before you
place the product on fine wooden furniture.
3
PRODUCT FEATURES
The Unit is an iPod/iPhone Docking Music System that incorporates the
following features:
! Play and Charge Your iPod nano, iPod touch, iPod classic, iPod video and
iPhone
! Auxiliary Input Jack
! FM digital tuner with 10 presets
! Time synchronization
! Digital Volume Control
! Sleep timer function
! Dual Alarm clock function – Wake to radio/alarm or iPod/iPhone
! Snooze function
! Night Light On/Off
! Remote Control
4
LOCATION OF CONTROLS
MAIN UNIT
1
2
5
3
4
6
AUX/Alarm
PM
7
8
9
10
11
12
13
5
14
15
1
2
16
17
18
DC 5V 2A
21
PRESS
20
19
1.Snooze/Sleep Button
2.FM indicator
12. SKIP/Fast Backward
Button
13. Standby /Function Button
3.iPod/iPhone indicator
14. Light On/Off Button
4.Aux/Alarm indicator
15. Reset Button
5.Alarm 1 indicator
16. Preset/ Time set Button
6.Alarm 2 indicator
17. ALARM 2
7.PM indicator
18. ALARM1
8.Volume Up(+) Button
19. AUX IN Jack
9.Volume Down(-) Button
10.SKIP/Fast Forward
Button
20. DC IN Jack
21. DOCK Release Button
11.Play/Pause
Button
6
REMOTE CONTROL
FUNCTION
1
2
TIME SET
SNOOZE
DIMMER
8
9
10
3
4
ALARM1
SLEEP
ALARM2
ENTER
5
REPEAT
11
12
PRESET
13
14
15
16
6
MENU
17
18
19
7
20
1.Standby
Button
2.Time set Button
3.ALARM 1 Button
4.ALARM 2 Button
5.SKIP/Fast Backward
6.iPod Menu Button
7.Mute Button
8.Function Button
9.Dimmer Button
10.Snooze Button
Button
7
11.iPod Repeat Button
12.Sleep Button
13.Preset Button
14.iPod Menu Up
Button
15.SKIP/Fast Forward
Button
16.iPod Enter Button
17.Play/Pause
Button
18.iPod Menu Down Button
19.Volume Up(+) Button
20.Volume Down(-)Button
GETTING STARTED
ACCESSORIES INCLUDED
Carefully remove the unit and all accessories from the display carton. Please
verify that you have all the following accessories if you are recycling the gift
box.
!
User Manual
!
AC Adaptor
!
Remote control
Input:AC100-240V 50/60Hz
Output:DC5V 2000mA, center-positive
POWER SOURCE
This unit operates on an external AC adaptor rated at DC5V 2000mA (included)
and requires one DC3V type CR2025 Lithium battery (included) for remote
control. Do not attempt to operate the unit from any other power source. You
could cause damage to the unit and void your warranty.
CONNECTING THE AC ADAPTOR
1. Insert the plug located at the end of the AC adaptor wire into the DC Jack on
the back of the unit.
2. Insert the AC Adaptor plug into a power outlet rated at 120V AC ~ 60Hz.
1
2
DC 5V 2A
PRESS
8
CAUTIONS: The AC Adaptor Plug will only fit into matching AC outlets.
This is a safety feature to reduce the possibility of electric shock. If the
plug will not fit in your AC outlets, you should have the outlet changed by
a qualified, licensed electrician. Do not use an adaptor to make the plug
fit into your outlet. This defeats the safety feature and could expose you
to electric shock.
NOTE ON NON-MAGENTICALLY SHIELDED SPEAKERS
The speaker of this unit is not magnetically shielded and may cause color
distortion on the screen of some older TVs or video monitors. To avoid this, you
may need to move the unit further away from the TV or monitor if unnatural
color shifts or image distortion occurs.
Remote Control
The remote control operates on one CR2025
battery (included). To activate the remote
control, remove the insulation tab inserted in the
BEFORE USE
PULL OUT
CR2025
battery compartment.
When the operation of the remote control
becomes intermittent or unsatisfactory, replace
the original battery with a new 3-volt lithium
battery.
BEFORE USE
PULL OUT
1. Slide out the battery holder from the remote control case.
2. Replace the 3V CR2025 battery. Be sure the battery is installed correctly.
The remote will not work if the battery is installed with the wrong polarity.
CAUTION:
1. Danger of explosion if the battery is replaced incorrectly.
2. Replace only with the same or equivalent type battery.
3. Insert the battery holder back into the battery slot.
Note: Only use a well-known brand of cell battery to ensure the longest life and
best performance.
9
BATTERY CARE
! If the unit is not used for an extended period of time, remove the battery. An
old or leaking battery can cause damage to the unit and may void the
warranty.
! Do not dispose batteries in fire. Batteries may leak or explode.
! Do not try to recharge batteries that are not intended to be recharged; they
can overheat, rupture and leak (Follow battery manufacturer’s directions).
! Only an adult should replace the battery. Do not leave it lying around where a
young child or pet could play with swallow it.
SETTING THE TIME
AUTOMATIC TIME SYNC WITH iPod /iPhone
After plugging in the AC adaptor,”12:00” will appear and start blinking on the
LED display. If you have an iPod or iPhone with the correct time showing, you
can dock it securely onto the connector in the Docking Bay to take advantage of
Automatic Time Sync.
1. When “12:00” is blinking on the LED Display after the initial power
connection, dock your iPod/iPhone onto the connector in the docking bay
2. Your iPod/iPhone will communication with the unit and automatically sync
the time with your iPod/iPhone time and show it on the LED Display after
about 5 seconds.
Tips:
! The iPhone receives constant updates from the phone service provider, so
the iPhone time will always be accurate.
! The time on your iPod was updated with your computer the last time the
iPod was attached and synced with it. We recommend you to calibrate your
computer’s system clock and sync your iPod with iTunes right before
docking into the unit to make sure the current time is accurate.
! The Automatic Time Sync does not support earlier iPod models, like iPod
mini and iPod photo (4G/color display)
! When first docked, the iPod/iPhone will run an authentication process
internally. The display will be off during this authentication process and the
unit may not respond if any keys are pressed for about 5 seconds.
! A 59 seconds difference between the clock on the unit and the synced
iPod/iPhone is possible.
! If you need to change the time after using the automatic time sync, you will
have to do it manually.
! If you disconnected the power outlet longer than 3 minutes, you need to
automatic time sync with your iPod/iPhone again.
Note:
1. The clock has to be set the first time you plug the unit in.
2. The Clock is default to12 Hour format mode.
10
SETTING THE CURRENT TIME MANUALLY
1. With the unit in standby mode, press and hold the PRESET/TIME SET
button on the main unit or press the TIME SET button on remote control until
“12Hr” is blinking on the LED Display.
2. Press the
or
button on main unit or remote control to switch
between 12 hour (12Hr) and 24 hour (24Hr) format. Press the
PRESET/TIME SET on the main unit or TIME SET button on remote control
again to confirm your time format selection.
3. The Hour digits will start to blink. Press the
or
button on main unit
or remote control to set the correct hour. Press the PRESET/TIME SET on
the main unit or TIME SET button on remote control again to confirm.
Note: Make sure the hour is set so that the AM or PM indicator is displayed
correctly.
4. The Minute digits will start to blink. Press the
or
buttons on main
unit or remote control to set the correct minute. Press the PRESET/TIME
SET on the main unit or TIME SET button on remote control again to
confirm.
ALARM OPERATIONS
This unit provides two different wakeup times, ALARM1 and ALARM2. You
can choose to use them independently or simultaneously: ALARM1, ALARM2
or both ALARM1 and ALARM2.
SETTING THE ALARM(S)
Note:
! Alarm time(s) can only be set in Standby mode.
! When alarm time is reached the clock display & the alarm indicator will
blink together.
! Don’t dock an iPod/iPhone onto the connector in the docking bay when
the Alarm is sounding .
1. Press and hold the ALARM 1 button on main unit or remote control, the
ALARM 1 indicator will go on, then press the ALARM 1 button again the
hour digits will blink.
2. When the hour digits are blinking, press the
or
buttons on main
unit or remote control to set the hour.
3. Press the ALARM 1 button on main unit or remote control to confirm, the
minute digits will now begin blinking.
4. When the minute digits are blinking, press the
or
buttons on main
unit or remote control to set the minutes.
5. Press the ALARM 1 button on main unit or remote control to confirm the
or
alarm time, a wake source indicator will begin blinking. Press the
buttons on main unit or remote control to select the source you want to
wake to, FM Radio or iPod/iPhone.
11
6. Press the ALARM 1 button on main unit or remote control to confirm, Press
the
or
buttons on main unit or remote control to set the wake up
volume level.
7. Press the ALARM 1 button on main unit or remote control button to confirm.
8. Repeat steps 1 to 7 using the ALARM 2 button when setting up ALARM 2.
Note: When “Wake to Radio” is selected, make sure the radio station you want
to wake to is tuned. If “Wake to iPod” is selected but an iPod or iPhone is
not docked, the Alarm source will be redirected to the Alarm
automatically when the alarm time is reached. If “Wake to Alarm” is
selected, the alarm will beep when the set Alarm time is reached.
9. If you want to turn off the alarm, press the ALARM 1 or ALARM 2 buttons on
the main unit or remote and the Alarm1 or Alarm 2 indicator will go off.
10. When the wake time is reached, the selected source, radio or iPod/iPhone
or Alarm will begin to play. The sound will starts playing softly and gradually
becomes louder until your preset volume level is reached. The alarm
continues to sound for 60 minutes if no button is pressed and the unit will
reset itself for the following day.
11. To stop the alarm after the preset time is reached and the source begins to
play, press the STANDBY
the alarm.
button on main unit or remote control to stop
12. Or press the SNOOZE button on main unit or remote control, the alarm will
silence for nine minutes, the sound once again,
Note: The Snooze function can be used again repeatedly, but only within
one hour from the original wake time.
RADIO OPERATION
TUNING THE RADIO
1. Press and hold the STANDBY
button on the main unit or press the
STANDBY button on remote control to turn on the unit. Press the FUNCTION
button on main unit or remote control repeatedly to select the RADIO mode.
The FM indicator will go on & the receiving frequency will appear on LED
Display.
2. To automatically scan to next available radio station, press and hold either
or
buttons on main unit or remote control for about 2
the
seconds until the frequency readout on display begins to scan then release
the button. The tuner will stop on the first strong station signal it finds. The
frequency readout will revert to the current tine after about 5 seconds.
12
3. To manually tune to a weaker station that may have been skipped during the
automatic tuning, tap the
or
buttons on main unit or remote control
repeatedly until the station is properly tuned. The frequency readout will
revert to the current time after about 5 seconds.
4. Adjust the sound level by pressing the VOLUME - / + button on main unit or
remote control.
Note:
! Manual tune to select weaker stations that might be bypassed during
automatic tuning.
! If the automatic tuning does not stop on the exact frequency of the station,
for example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual
tuning method to "fine tune" to the exact frequency of the desired station.
! If a station is broadcasting in stereo, the unit will automatically receive the
stereo broadcast.
Hints for the Best Reception
! To obtain the best FM Stereo reception, unwrap and fully extend the FM
Antenna and adjust the position of the wire for best station reception.
Setting the Radio Station Presets
The unit allows you to store up to 10 FM stations for easy recall at any time.
1. In the FM mode, tune to the radio station you want to store in memory using
the
or
buttons on the main unit or remote control.
2. Press and hold the PRESET /TIME SET button on the main unit or the
PRESET button on remote control. The preset channel number "ch 1" will
be flashing on display.
3. To change the preset channel number location, press the
or
buttons on main unit or remote control to step through the preset locations
(ch 1– ch 10).
4. To confirm the preset location, press the PRESET/TIME SET button on the
main unit or the PRESET button on remote control.
5. To store up to 10 FM station presets, repeat steps 1 to 4 above.
Note:
1. There will be a brief delay for programming, the unit will automatically switch
back to normal tuner mode in 5 seconds.
2. You can overwrite a present station by overwriting and storing the new
frequency in its place.
Recall Preset Radio Stations
1. Set the unit to RADIO mode.
2. Press the PRESET/TIME SET button on the main unit or the PRESET button
on remote control and the preset channel appears on the display. Press the
or
button to recall preset stations.
3. Press the PRESET/TIME SET button on the main unit or the PRESET button
on remote control again to confirm.
13
LISTENING TO YOUR iPod/iPhone
CHARGING YOUR iPod OR iPhone
This unit plays and charges various iPod and iPhone models in all modes
using the 30-pin docking connector.
Even if the unit is in standby mode, once your iPod or iPhone is properly
docked, the charging process will start automatically.
LISTENING TO MUSIC ON YOUR iPod/iPhone
1. Press the Dock Release button on the back the unit, the docking bay will
slide out. Dock your iPod/ iPhone carefully and securely onto the Docking
Connector.
Note: Please be careful when placing the iPod / iPhone into the docking bay to
avoid damaging the 30-pin connector on the iPod/iPhone or on the
docking system.
2. Press and hold the STANDBY button on the main unit or press the
STANDBY button on remote control to turn on the unit.
3. Press the FUNCTION button on the main unit or remote control repeatedly to
select iPod mode. The iPod/iPhone indicator will go on. The iPod/iPhone will
ready for playing.
4. After selecting your favorite song, press the
button on main unit or
remote control to play or pause iPod/iPhone playback.
5. Press the
or
buttons on main unit or remote control to skip to the
next or previous song.
button on main unit or remote control for
6. Press and hold the
or
fast-forwarding or fast-rewinding during playback.
7. From the remote control, press the MENU,ENTER and / buttons on the
remote control to control the iPod/iPhone menu, menu up/down and enter
selection.
Note:
1.The iPod/iPhone Menu Control function will work with most iPod
touch/iPhone models in iPod mode. Please make sure your iPod/iPhone is
in Music or iPod mode. The function will NOT work if the iPod/iPhone is the
on the MAIN or LOCKED screen.
2.The iPod menu navigating function of remote control will work on most
iPhone or iPod models except for iPod nano 6th generation.
8. Adjust the sound level by pressing the VOLUME - / + button on main unit or
remote control.
Note: The volume level cannot be adjusted using the volume control on
your iPod/iPhone after being docked.
14
AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and older, non-dockable iPods
(except iPod shuffle 3rd generation) and listen to your external source through
the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end
of the cable.
2. Plug one end into the Aux-in jack of the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio
device.
3. Press and hold the STANDBY button on the main unit or press the
STANDBY button on remote control to turn on the unit.
4. Press the FUNCTION button on the main unit or remote control repeatedly to
select AUX mode. The AUX/Alarm indicator will go on.
5. Turn on the external audio device.
6. The volume level can now be controlled through the main unit. Operate all
other functions on the auxiliary device as usual.
Note:
! If you are connected to the Line Out Jack of your external device then you
only need to adjust the volume control on this unit. If you are connected to the
Headphone Jack of your external device then you may need to adjust both
the volume controls of your external device and this unit to find the most
desirable volume setting.
! Press and hold the STANDBY
button on main unit or press the
STANDBY
button on remote control to turning off the unit when you finish
listening. Don't forget to switch off the power of your external device as well.
SLEEP TIMER
You can use the sleep timer to automatically turn off the unit when the selected
sleep duration has elapsed when in Radio, iPod/iPhone or AUX modes.
1. Turn the unit on and either dock your iPod/iPhone or tune to the desired
radio station.
2. Press the SLEEP button repeatedly to select the desired sleep time. The
sleep timer can be set for 90-10 minutes in 10 minute decremental steps.
The unit will stop and go into standby mode automatically when the selected
sleep duration has elapsed.
3. To cancel the sleep timer, press the SLEEP button on main unit or remote
control until timer shows “OFF”.
4. To turn the unit off before the sleep time has elapsed, press STANDBY
button at any time.
15
DIMMER
Press the DIMMER button to adjust the LED Display intensity from
High/Mid/Low to obtain the best clarity of LED Display readout.
RESETTING
If the system does not respond or has erratic or intermittent operation, you
have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
press the reset button on the back of the unit to reset the unit.
Note: Even though the unit has been internally reset when you press the
"RESET" button, the clock time may still need to be adjusted to the
current time. Please follow the instructions in the "Setting the Clock"
section above.
CARE AND MAINTENANCE
1.
2.
3.
4.
Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
For better Clock Display clarity, avoid operating the unit under direct sunlight or in
strong room illumination.
Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
16
TROUBLESHOOTING GUIDE
Symptom
The unit does not
respond (no
power).
Possible Problem
Solution
AC Adaptor is not plugged
into a wall outlet or the
connector is not plugged into
the power supply jack on the
back of the unit.
Plug the AC adaptor into a wall outlet and plug the
connector into the supply jack on the unit.
Wall outlet is not functioning.
iPod/iPhone is not installed
properly.
iPod/iPhone does
not respond to the
speaker system.
Your iPod/iPhone is locked
up.
iPod/iPhone is not iPod
mode
iPod/iPhone does
not charge.
Weak FM
reception
Sound is distorted.
Unit gets warm
after extended
play at high
volume.
Plug another device into the same outlet to confirm
the outlet is working.
Remove your iPod/iPhone from the dock and check
for obstruction on the connectors in the dock and
on your iPod/iPhone. Then reseat it on the dock.
Please make sure that your iPod/iPhone is working
properly before docking into the unit. Please refer
to your iPod/iPhone manual for info on resetting the
iPod/iPhone.
Make sure the function of iPod/iPhone is set to
music or iPod mode.
iPod/iPhone is not installed
properly.
Remove your iPod/iPhone from the dock and check
for obstruction on the connectors in the dock and
on your iPod/iPhone. Then reseat it in the dock.
iPod/iPhone is locked up/
frozen. iPod/iPhone battery
has problem.
Please make sure your iPod/iPhone is working
properly before docking into the unit. Please refer
to your iPod/iPhone manual for details on resetting.
FM antenna wire is not fully
Extend or reposition the wire antenna for best
extended.
reception.
Volume level is set too high.
Decrease the volume.
If the iPod/iPhone original sound source is of poor
quality, distortion and noise are easily noticed with
high-power speakers. Try a different audio source
such as a music CD.
If you are using an external sound source like older
generation of iPod, try reducing the output volume
on the device itself.
Sound source is distorted.
Turn the unit off for a period of time or lower
volume.
This is normal.
17
SPECIFICATIONS
Power Requirement
AC-DC adaptor:
Main unit:
Input: AC 120V, 60Hz
Remote Control:
DC input: DC5V/ 2000mA
1 x 3V CR2025 Lithium Battery
Frequency
FM:
87.5-108MHz
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod and iPhone, respectively,
and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of
this accessory with iPhone or iPod may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
At Spectra, environmental and social responsibility
is a core value of our business. We are dedicated
to continuous implementation of responsible
initiatives with an aim to conserve and maintain the
environment through responsible recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on
Spectra’s green initiatives or to find a recycler in your area.
18
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A . ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from
defective materials or factory workmanship for a period of 90 days from the date of original
customer purchase and provided the product is utilized within the U.S.A. This warranty is not
assignable or transferable. Our obligation under this warranty is the repair or replacement of
the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA
Service Department, accompanied by proof of the date of original consumer purchase, such as
a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty
service. If the product is repaired or replaced under warranty, the return charges will be at
SPECTRA’s expense. There are no other express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside
the descriptions and warnings covered within the user manual or non-SPECTRA
approved modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in
compliance with electrical codes or SPECTRA user manual specifications, or failure to
provide reasonable care and necessary maintenance as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products
are used in a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit
carefully and send it freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS
RETURNED WITHIN THE WARRANTY PERIOD shown above, please include a proof of
purchase (dated cash register receipt) so that we may establish your eligibility for warranty
service and repair of the unit without cost. Also include a note with a description explaining how
the unit is defective. A customer service representative may need to contact you regarding the
status of your repair, so please include your name, address, phone number and email address
to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $35.00 to
cover the cost of repair, handling and return postage. All out of warranty returns must be sent
prepaid.
It is recommended that you contact Solid SIgnal at 877.312.4547 with support
questions regarding this product.
0812
Printed in China
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement