WaterSentinel WSS 2 water filter Installation instructions

Below you will find brief information for water filter WSS 2. The WSS 2 is a water filter designed to remove chlorine taste and odor from your refrigerator's water dispenser. It has a flow rate of .5 gpm (1.89 lpm) and is certified by NSF International and WQA against NSF/ANSI Standard 42. This filter should be replaced every 6 months or after 300 gallons of use.

PDF Download
Document
WaterSentinel WSS 2 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Reduces chlorine taste and odor
  • Flow rate of .5 gpm (1.89 lpm)
  • Certified by NSF International and WQA
  • 6 month or 300 gallon filter life
  • Easy to install and replace
  • Includes a filter replacement indicator light

Frequently asked questions

You should replace the filter every 6 months or after 300 gallons of use, whichever comes first.

The flow rate of the WSS-2 filter is .5 gpm (1.89 lpm).

The filter replacement indicator light will illuminate to alert you when the filter needs to be replaced.

The operating temperature range for the WSS-2 filter is 33°-100°F (0.6°-38°C).

The operating pressure range for the WSS-2 filter is 30-100 psi (207-689 kPa).
Preparing document for printing…
0%