Winchester WKDP 21 Instructions / Assembly

Below you will find brief information for Sheet Metal Plenum WKDP-21. The WKDP-21 is a sheet metal plenum designed to fit 21” wide WINCHESTER Residential Evaporator Coil Models. It includes four side pieces and one top piece, which can be trimmed to fit the desired height. This plenum is used to connect the indoor coil to the ductwork, ensuring proper air flow and maximizing efficiency. WKDP-21 offers an inter-locking feature for easy assembly and can be secured to the indoor coil flanges using sheet metal screws and aluminum tape.

PDF Download

Document

Hello! I am an AI chatbot specifically trained to assist you with the Winchester WKDP 21 Instructions / Assembly. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Inter-locking feature for easy assembly
Designed for 21” wide WINCHESTER Residential Evaporator Coil Models
Secure and seal plenum to indoor coil flanges using sheet metal screws and aluminum tape
4 side pieces and 1 top piece for easy installation
Trim side pieces to fit application height for a custom fit

Frequently asked questions

The WKDP-21 is a sheet metal plenum that is used to connect the indoor coil to the ductwork.

The WKDP-21 is designed to fit 21” wide WINCHESTER Residential Evaporator Coil Models.

The WKDP-21 is easy to install. Trim the side pieces to the desired height and assemble the plenum using the inter-locking feature. Attach the open end of the plenum to the top opening of the indoor coil and secure it with sheet metal screws and aluminum tape.