product catalogue - Provident Technologies

product catalogue - Provident Technologies
PRODUCT
CATALOGUE
High-End Wireless Security
The sophisticated iConnect system, with its sleek design, serves as the command center for a
residential and small commercial Security and Home Automation network.
Powered by the full range of ELAS remote management functions, iConnect effortlessly
integrates remote signalling from end-users, monitoring statins, service providers and
technicians. The ELAS enables remote programming and maintenance of the iConnect
system by internet or smartphones, built-in interface with PSTN, GSM. GPRS communication
modules, configuration of email and SMS event notification to users, and much more.
The two-way wireless RF technology built into iConnect also enables the use of PIR cameras
for event-triggered video images and clops, as well as video verification. The compatible EL
two-way peripherals communicate with the iConnect control panel and respond to RF signals
with top-level data security. Designed for superior efficiency, the peripherals only respond to
signals when the control panel is armed, and then they act ith enhanced speed to minimize
energy consumption and signal traffic congestion.
Main Features













Two-way wireless FM technology
IP/GPRS/GSM or IP/GPRS communication modules
Event reporting - IP/GPRS with GSM backup (Voice or SMS SIA/CID)
Email/SMS/Voice event notifications to end users
Advanced remote management features for users - Web and smartphone applications
Event-triggered initiation of two-way voice communication - full duplex/simplex
Remote programming, firmware updates and maintenance
IP protocol via the internet (no need for static IP)
Up to 2 optional wired zone expanders for an additional 8 and 16 wired zones
Programmable output for wired siren
Wired programming keypad
Sleek, high-end design
Complies with EN-50131-3 Grade 2 Class II
Video



Video verification
User initiated (video) images
Video look-in
Encrypted Two-Way FM Technology





Incorporates two-way FM technology for optimal RF noise immunity
Supports two-way communication to wireless products
Digital RSSI (Reception Signal Strength Indication)
Robust anti-collision transmission
Frequency options: 868, 433MHz
Full Range of Two-Way Wireless Peripherals









Up to eight PIR cameras
Interior and exterior motion detectors, including pet immunity
Magnetic contact and universal transmitter
Glass break detector and vibration sensor
Smoke, gas and water leak detectors
Panic and medical emergency buttons
External and internal two-way wireless siren
Up to 19 wireless keyfobs
Wireless LCD programming keypad
Advanced Installer Tools










Menu-driven programming for quick and easy installation
Remote firmware upgrades via IP or GPRS
Advanced remote programming software:
Fast up/down loading via PSTN, IP, GSM or GPRS
Upload status to all wireless devices
Installer built-in utilities:
Real-time transmitter list and status, visible and audible signal strength meter
GSM network coverage indication
Smart walk test: transmitter test: wireless siren test: internal siren test: interface test
Receiver quality measurement to evaluate signals in the same frequency
Security
Control
Voice Verification
GPRS
End User
GSM
IP
Safety
Connectivity
PSTN
Service Provider
Installer
Main Features
Wireless
FM
Arming options
Full, perimeter, part or partitions
Distress keys
Panic, fire, medical
Number of user codes
32 four-digit codes
Maximum number of zones 34
Wireless zones
32
Wired zones
2 on-board + 8-16 D.E.O.L.R with zone expander
Wireless keyfobs
Up to 19 multifunction keyfobs
Wireless keypads
Up to 4 two-way keypads
Repeaters
Up to 4 two-way repeaters
Number of accounts
Up to 6 accounts for central station event reporting or vocal
message event reporting to the end user.
Reporting protocols
Contact ID, SIA, SIA IP, SMS SIA, SMS Contact ID
End user notifications
SMS messages, e-mails, voice messages, follow-me numbers
Event log
1022 on the control panel, over 2000 logged on the ELAS
Voice messages
22 recorded event messages; Home ID
Speed dial numbers
1 service call
Web user application
Video verification, remote system activation and control, system
settings, Event notification settings and PGM control
Mobile applications
Smartphone (iPhone, Android etc.) applications for video
verification, remote system activation, system settings, event
notification settings and PGM control
Email
Video verification and event notification
SMS options
Remote system activation and control, event notification and
PGM control
DTMF options
Remote system activation and control, home automation control
Video verification
Smartphone applications, email and web
Audio verification
Voice message event notification, two-way audio, follow-me,
listen-in
Firmware upgrade
Local firmware upgrades via a standard USB cable
Remote firmware upgrade
Upgrade firmware via IP or GPRS
Remote programming
Via PSTN, GSM, GPRS or IP
Wired Accessories
Wired zone expander
Inputs: 8 wired zones, AC, backup battery, tamper, Bus.
Outputs: 2 aux. power, 2 programmable outputs
Modules
PSTN
Event notification, two-way audio , remote programming, listenin, DTMF control
GSM
Event notifications, SMS remote activations, two-way audio ,
remote programming, listen-in, DTMF control
Ethernet (IP Module)
Remote firmware upgrades, e-mails, event notifications
(Including SMS via the ELAS), remote programming
GPRS
Remote firmware upgrade, e-mail, event notifications (Including
SMS via the ELAS), remote programming
Auxiliary power
1 output: 100mA max
2 additional outputs with zone expander: 1A max
Programmable outputs
2 Solid state (100mA max load), Additional 2 with zone
expander, solid state relay (1000mA max)
Built-in siren
93dB
Power supply
Internal 9VAC output, 230v/115v input
Operating temperature
0-60°C / 32-140°F
Backup battery pack
7.2V/1.5Ah
Communication modules
PSTN, GSM /GPRS, IP
End User Features
Professional Options
Hardware Features
Wireless Input / Output Expander
The 2-Way Wireless I/O Expander Module is an extension module that
enables the connection of wired devices to the iConnect 2-Way system
therefore transforming it into a true Hybrid system.
The expander provides the flexibility to expand the possibilities of any
iConnect 2-Way wireless installation by allowing the use of EL high-end
wired devices.
Up to 8 hardwired inputs and 4 programmable outputs can be assigned to each of the 2
optional expanders connected to the system.
The wireless I/O expander is the ideal solution for integrating the power of wired into your
wireless application.











Bi-directional wireless communication
8 zone inputs (NO, NC, EOL, DEOL)
Up to 2 per system, meaning up to 16 wired zones + 2 on the iConnect
2-Way main board
2 auxiliary parallel outputs 12 [email protected] per expander
PGM-Programmable Outputs: Dry contact, [email protected], [email protected]
Fully supervised
Dual tamper protection (Box & Wall)
Stand alone with local power (no need to run wires to the panel)
Includes a polycarbonate box and a 14.4v/1.5A power supply
Optional back-up battery 12V/7AH
I/O EXPANDER
Two-Way Wireless PIR Camera
Specifically designed for EL’s Two-Way Wireless range, the PIR Camera incorporates three
state-of-the-art technologies: PIR motion detection, CMOS imaging technology and two-way
wireless communication. When armed, the Camera is automatically activated by an event and
captures a series of images before, during and
after the alarm. These are sent to users or security personnel smartphone and web
applications.
Users can also trigger video transmission on demand, through the ELAS smartphone
application and web interface, which remotely activates the PIR Camera and generates
real-time snapshots of the protected site: verifying an intrusion, looking in on a child, or
checking the premises for lights left on.
Based on provider’s end user control settings, users may likewise remotely disable the
camera to save battery power or protect privacy.
Technical Specification:



















14m x 14m range
Installation height 2.5m
PET Immunity option (45Kg animals)
Digital Adaptive Temperature Compensation
1,2 or 3 pulse count
High sensitivity 1/4 inch CMOS image sensor
Various picture resolutions – VGA, QVGA, QQVGA, in color or B&W
Night vision with 2 IR LEDs
IR flash ensures camera picture capture remains discreet
10m coverage range in absolute darkness
Automatic B&W in low light conditions
Two powerful AA 3.6V/2Ah batteries for extended battery life
No. of pictures per event configurable from 1 to 10
Configurable time delay between picture capture (2fps to 15fps)
Remote camera settings configuration via the ELAS
Up to 8 Wireless PIR Cameras can be installed with each panel
Any detector can be configured to activate picture capture
“Sleep mode” during disarm for battery conservation
Optional bracket support
Video Verification:



Real-time video verification for efficient event assessment
Allows immediate confirmation of a crime-in-progress
Users and monitoring services can verify events to determine the most appropriate response in real-time.
PIR Cameras
IP
GPRS
Internet
ELAS
Monitoring
station
Email alert
Phone alert
Smartphone
App
notification
Wireless Outdoor Motion Detector
The Wireless Outdoor Detector’s robust design incorporates two PIR
channels that cross-check their target signals to eliminate false alarms
while providing high catch performance. Reliability is enhanced by a
weather-resistant housing with rubber seal and protective hood






12m wide-angle coverage
Two PIRs for eliminating false alarms
Pet-friendly up to 45kg
Integral hood provides protection from sun and rain
Two 3V lithium batteries
Optional long-range lens
Two-Way Wireless Motion Detector
This two-way motion detector’s sleek design houses a smart detector
which incorporates a low-current microprocessor, enabling it to
distinguish between false alarms and intruders.
Features include adaptive pulse and temperature-change
compensation. Optional pet immunity version.









Micro-controller based signal processing
Built-in bracket for easy installation
Range of 14 meters
PIR supervision
Optional pet immunity up to 45kg
Digital adaptive temperature compensation
Pulse count options (1, 2, 3, or Adaptive)
Option to disable LED indication
3.6 V ½ AA lithium battery - can be replaced independently by end-user
Wireless Magnetic Door Contact
This compact magnetic device detects door and window intrusion.
Designed for use with EL's supervised wireless range of receivers,
additional input can be integrated to work in parallel to the magnetic
switch, for a wider range of wireless protection.






3.6 V ½ AA lithium battery
Small size: 65x30x16mm
Front and back tamper options
Additional input terminal
Input activation: by a short, dry contact or open collector
Data transmitted: alarm, tamper, low battery and supervision
Wireless Flood Detector
The Flood Detector uses micro-controller based signal processing to provide
early warning of water leaks. The compact, robust device is ideal for use in
basements or near air conditioners and sinks, and works independently during
power outages.




3.6 V ½ AA lithium battery
Small size: 65x30x16mm
Front tamper
Data transmitted: alarm, tamper, low battery and supervision
Wireless Universal Transmitter
The Universal Transmitter is effective in connecting a variety of peripherals to
the control system. The transmitter includes a single input terminal for use in a
wide range of wireless applications.





3.6 V ½ AA lithium battery
Small size: 65x30x16mm
Front and back tamper
Input activation: by a short, dry contact or open collector
Data transmitted: alarm, tamper, low battery and supervision
Wireless Vibration Detector
This adjustable Vibration Detector senses low-amplitude vibrations around
vulnerable access points, setting off an alarm before an intruder has a chance to
enter the premises. The value of this detector lies in its ability to sound off during
the first stage of a break-in attempt, before any damage can be done.






Sensitivity adjusted to local background noise during installation
3.6 V ½ AA lithium battery
Four-minute delay between transmissions conserves battery and prevents multiple alarms
for one event
Impact strength indicator
Data transmitted: alarm, tamper, low battery and supervision
Front and back tamper
Wireless Smoke Detector
The Smoke Detector is a photoelectric device that integrates fire warning
capability with intruder alarm systems. Designed for use in a single
residential unit, the Smoke Detector transmits constant supervision
reports. When significant smoke is accumulated, the detector sounds an
alarm horn and the transmitter sends an alert to users and/or security
personnel.








Range up to 300m (1000ft) line of sight
Ceiling mount
No radiation emission
Data transmission: alarm, restore, low battery and supervision
Test mode
Back tamper
Uses two 3V lithium batteries
Complies with EN54-7
Wireless Gas Detector
The Wireless Gas Detector, a combination gas alarm and integrated
transmitter, provides warnings of gas leaks from various household
appliances. On detecting the presence of dangerous gases, the unit
sounds an alarm and notifies the control panel.





Detects Butane, Propane and Methane (natural gas)
Loud alarm (85 dB) and signal transmitted when detecting gas build up
Fully supervised device
Test button and continuous self-testing function
Powered by 220V AC local current
Wireless CO Detector
The CO Detector emits an alarm in the presence of hazardous levels of
carbon monoxide gas. An advanced electro-chemical sensor detects
and measures the concentration of the CO, sounds a local alarm and
transmits an alert to the control panel. The user-friendly LED panel is
color-coded for quick reading.





Test button and continuous self-testing function
Audible alarm of 85 dB at 3 meters
Two 3V lithium batteries
LED indicators: Green (Power On – flashes once per minute),

Red (Alarm), Orange (Malfunction), all three (Test Mode)
Data transmitted: alarm, tamper, low battery and supervision
Wireless Repeater
The Wireless Repeater extends the range between the control panel and
wireless detectors, eliminating problematic reception areas. The Repeater
can handle registration for up to 32 transmitters and is compatible with EL’s
Two-Way Wireless product range.






LCD programming keypad plug-in connection
Battery and AC status LED indicators
Runs on 9V AC or 12V DC transformer
Backup power: 6V/850mAh battery (five 1.2 Ni-MH rechargeable cells, size AAAL)
Built-in transmitter and receiver
Tamper switch
Two-Way Wireless LCD Keypad
The two-way fully wireless LCD keypad offers comprehensive and simple
system programming and control with home automation features.
The keypad is modern, streamlined keypad that enables users to remotely
control and operate their iConnect two-way security systems.
Using the modern blue LCD display and the multi-language support, the system
is easy to operate using the keypad itself.
The easy to use menus and adaptive menu tree options according to hardware
helps to make the keypad a friendly installation tool









Fully wireless installer programming and end-user operation
Blue LCD and backlight
Up to 3 keypads per system
Simplified menu logic. Displays only relevant menus according to hardware configuration, accessories
installed and authorization level
2 button emergency keys
Bracket to wall for easy installation
Double tamper protection
Battery save mode
4 x 1.5V, 3AH, AA LITHIUM Batteries
Wireless Emergency / Panic Keyfob
This one-button device is a water-resistant handheld transmitter designed for
crisis notification and emergency calls. The large button makes its use easy
for the elderly, disabled and sight-impaired individuals.




Two versions: Panic and Medical Emergency
LED transmission indicator also flashes to indicate low battery
3V lithium battery
Data transmitted: Event (Medical or Panic), Low Battery
Wireless Multi-function Keyfob
This newly designed miniature keyfob can easily fit onto a keychain for
fashionable convenience and control. The wireless device uses a single off
the-shelf battery, with efficient power use for longer battery life.






Four-button keyfob
Five Functions: Full, Part & Perimeter Arm, Disarm, Home Automation On/Off, Panic
Alarm Generation
LED transmission indication, also flashes to indicate low battery
Two-way version includes status indication
Ultra-compact: 44mm diameter x 14mm
3V lithium battery
Wireless Indoor Siren
This indoor wireless siren is designed for use with EL’s wireless control
systems. A smart algorithm to ensure extended battery life. Compact
design and dependable operation are some of the advantages.



Siren output: 105 dB at 1 meter
Includes 5 x long life 3v Lithium batteries
Dimensions: 180mm in diameter
Wireless Outdoor Siren
The fully wireless, two-way amber triangle siren comes with a highvisibility strobe. Battery life is extended using smart algorithms and a high
-power battery. The siren relays various alerts (Burglary, Fire, Arming/
Disarming) from the panel and transmits warning signals (low battery, AC
loss and tamper alert) to the panel.
Designed to extend the signalling capabilities of the security system
outside the protected area in any outdoor environment. Being fully battery
operated and wireless, the external wireless siren offers an easy and
flexible solution for quick installation.
Up to four sirens can be connected to one system.





Two-way wireless uses proprietary robust FM technology
Fully independent battery power
Battery type: 3.6V/13Ah lithium D size
Siren output: 106 dB at 1 meter
Front and back tamper
Wireless IP Camera Indoor
Professional IP camera provides a complete plug and play video verification
solution together with the security systems for both residential and
commercial installations.






1,3 megapixel
Colour HD,
2-way audio channel
Micro SD slot for local storage
Wifi
IR leds 10m
Wired IP Camera Outdoor
Professional IP camera provides a complete plug and play video
verification solution together with the security systems for both
residential and commercial installations.





1,3 megapixel
Colour HD
PoE (Power over Etheret)
Day / night
IR leds 30m
Wired Micro-X
Micro-X is a 12m (adjustable) DUAL TECHNOLOGY detector. Incorporating
High Quality PIR and very stable Microwave Detector





9 - 16V DC
Coverage 12m x 12m
Dual element sensor with build-in patch antenna
Led indicators, selectable
Microwave Frequency: 10.525, 10.687, 9.9 or 9.3GHz
Wired Quest
The Quest's enviable feature list includes white light filter, selectable pulse
count and exceptionally effective RFI immunity all working together to virtually eliminate false activation. Moulded from polished white plastic and of a
compact but easy to work with size the Quest will blend in perfectly with all
decors.




9 - 16V DC
RFI immunity
Alarm output
Tamper switch
Watchout Extreme Outdoor Dual Tech Detector
The improved WatchOUT eXtreme provides better 24-hour protection
against vandalism, with both Active IR Anti-mask and Proximity alerts.
This together with unique outdoor detection technologies, Sway
Recognition and Digital Correlation takes performance to the extreme.





4 Detector Channels: 2 Microwave and 2 PIR
Coverage Wide Angle: 15m 90 degrees, long range 23m 5 degrees, barrier 15m
5 degrees
Pet Friendly for animals up to 70cm height
IP 65 environment rating with protective hood
Anti Masking
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement