DVD receiver Alpine DVA-9861Ri
PHONES
(044) 360-7-130
(050) 336-0-130
(063) 788-0-130
(067) 233-0-130
(068) 282-0-130
Internet store of
autogoods
ICQ
294-0-130
597-0-130
SKYPE
km-130
CAR RECEIVERS — Receivers • Media receivers and stations • Native receivers • CD/DVD changers • FM-modulators/USB adapters • Flash memory • Facia plates and adapters • Antennas • Accessories |
CAR AUDIO — Car audio speakers • Amplifiers • Subwoofers • Processors • Crossovers • Headphones • Accessories | TRIP COMPUTERS — Universal computers • Model computers • Accessories |
GPS NAVIGATORS — Portable GPS • Built-in GPS • GPS modules • GPS trackers • Antennas for GPS navigators • Accessories | VIDEO — DVR • TV sets and monitors • Car TV tuners • Cameras • Videomodules
• Transcoders • Car TV antennas • Accessories | SECURITY SYSTEMS — Car alarms • Bike alarms • Mechanical blockers • Immobilizers • Sensors • Accessories | OPTIC AND LIGHT — Xenon • Bixenon • Lamps
• LED • Stroboscopes • Optic and Headlights • Washers • Light, rain sensors • Accessories | PARKTRONICS AND MIRRORS — Rear parktronics • Front parktronics • Combined parktronics • Rear-view mirrors
• Accessories | HEATING AND COOLING — Seat heaters • Mirrors heaters • Screen-wipers heaters • Engine heaters • Auto-refrigerators • Air conditioning units • Accessories | TUNING — Vibro-isolation
• Noise-isolation • Tint films • Accessories | ACCESSORIES — Radar-detectors • Handsfree, Bluetooth • Windowlifters • Compressors • Beeps, loudspeakers • Measuring instruments • Cleaners • Carsits
• Miscellaneous | MOUNTING — Installation kits • Upholstery • Grilles • Tubes • Cable and wire • Tools • Miscellaneous | POWER — Batteries • Converters • Start-charging equipment • Capacitors
• Accessories | MARINE AUDIO AND ELECTRONICS — Marine receivers • Marine audio speakers • Marine subwoofers • Marine amplifiers • Accessories | CAR CARE PRODUCTS — Additives • Washer fluid •
Care accessories • Car polish • Flavors • Adhesives and sealants | LIQUID AND OIL — Motor oil • Transmission oil • Brake fluid • Antifreeze • Technical lubricant
In store "130" you can find and buy almost all necessary goods for your auto in
Kyiv and other cities, delivery by ground and postal services. Our experienced
consultants will provide you with exhaustive information and help you to chose
the very particular thing. We are waiting for you at the address
http://130.com.ua
01GB00DVA9861Ri.book Page 1 Wednesday, December 7, 2005 12:00 PM
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/
PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
R
RDS DVD-AUDIO/VIDEO Receiver
EN
DVA-9861Ri
DE
a
.u
TM
DIGITAL VIDEO
m
o
c
.
FR
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
0
13
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
ES
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa igenom
denna användarhandledning.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
IT
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Dalian Dongtai Colour Printing Technology Co., Ltd.
No.24 Liaohexisan Road, Dalian Economic&Technical
Development Zone, China
Designed by ALPINE Japan
Printed in China (Y)
68-04123Z62-A
Autogood products internet store http://130.com.ua
01GB01DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
SE
01GB00DVA9861Ri.book Page 1 Wednesday, December 7, 2005 12:00 PM
ENGLISH
Contents
CD/MP3/WMA
Playback .......................................................... 14
Repeat Play ..................................................... 15
Operating
Instructions
M.I.X. (Random Play) .................................... 16
Searching from CD Text ................................. 16
File/Folder Name Search
(concerning MP3/WMA) ............................ 16
WARNING
About MP3/WMA .......................................... 17
WARNING ................................................. 4
CAUTION .................................................. 4
PRECAUTIONS ........................................ 4
Discs playable on this unit ..................... 6
Getting Started
DVD/Video CD
Playing a Disc ................................................ 19
Searching by Programme ............................... 19
Searching by Playlist ..................................... 19
Stopping Playback (PRE-STOP) ................... 20
a
.u
Turning Power On and Off ............................... 8
Stopping Playback ......................................... 20
Detaching and Attaching the Front Panel ........ 8
Fast-forwarding/Fast-reversing ...................... 20
Initial System Start-Up ..................................... 9
Adjusting Volume ............................................. 9
Finding the Beginning of Chapters or
Tracks ......................................................... 20
Setting Time ..................................................... 9
Selecting Programme/Playlist ........................ 21
m
o
c
.
Playing Still Frames (pausing) ....................... 21
Radio
0
13
Forward/reverse frame-by-frame Playback ... 21
Listening to Radio ............................................ 9
Slow Motion Playback ................................... 21
Manual Storing of Station Presets .................. 10
Searching by Title Number ............................ 21
Automatic Memory of Station Presets ........... 10
Searching by Group Number ......................... 21
Tuning to Preset Stations ................................ 10
Searching by Programme or
Playlist Number .......................................... 21
Frequency Search Function ............................ 10
RDS
Setting RDS Reception Mode and Receiving
RDS Stations ............................................... 11
Recalling Preset RDS Stations ....................... 11
Receiving RDS Regional (Local) Stations ..... 11
PI SEEK Setting ............................................. 12
Setting PTY31 (Emergency Broadcast)
reception ...................................................... 12
Searching Directly by Chapter or
Track Number ............................................. 22
Repeat Playback ............................................. 22
Switching the Audio Tracks .......................... 23
Switching the Angle ...................................... 23
Switching the Subtitles (subtitle language) ... 23
Displaying the Disc Status ............................. 24
Scroll to Move the Page Forward or Back ..... 24
Setting the Time to automatically Adjust ....... 12
Receiving Traffic Information ........................ 12
PTY (Programme Type) Tuning ..................... 13
Receiving Traffic Information While Playing CD
or Radio ....................................................... 13
Priority News .................................................. 13
Displaying Radio Text .................................... 14
Autogood products internet store http://130.com.ua
1-EN
01GB03DVA9861RiTOC.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 2 Wednesday, December 7, 2005 12:00 PM
Sound Setting
Custom Setup
Adjusting Bass/Treble/Balance
(Between Left and Right)/Fader
(Between Front and Rear)/Defeat ............... 25
Setting the Bass Control ................................. 25
Setting the Treble Control .............................. 26
Turning Loudness On/Off ............................... 26
Other Functions
Custom Setup Operation ................................ 35
Setting the DVD Audio Playback Mode ..........35
Setting the CD Play Mode ................................35
Setting the Video CD Play Mode .....................35
Playing the Bonus Group .................................35
External Audio Processor (Optional)
Adjustment Procedure for Dolby Surround .... 36
Setting the Speakers ....................................... 37
Displaying the Text ......................................... 27
Displaying Time ............................................. 28
Set MX Mode of the External Audio
Processor ..................................................... 37
Blackout Mode On and Off ............................ 28
X-OVER Adjustment ..................................... 37
Setting the Wallpaper ...................................... 28
Performing Time Correction Manually
(TCR)/ Phase Switching ............................. 38
Calculating the Time Correction ................. 38
Inputting the Time Correction ..................... 38
Switching the Phase .................................... 39
Graphic Equalizer Adjustments ...................... 39
SETUP
Sound Customizing
Adjusting Source Signal Levels ....................... 29
Subwoofer On and Off ..................................... 29
Setting the Subwoofer System ......................... 29
Setting Bass Compressor ................................ 40
Visual Customizing
m
o
c
.
Changing Lighting Colour ............................... 29
Dimmer Control ............................................... 29
Scroll Type Setting ........................................... 29
Scroll Setting (TEXT SCROLL) ...................... 29
Demonstration .................................................. 29
External Device
a
.u
Parametric Equalizer Adjustments ................. 40
0
13
Connecting an MP3 Changer
(PLAY MODE) ............................................ 29
Turning Mute Mode On/Off (INT MUTE) ...... 29
Setting the AUX Mode (V-Link) ..................... 29
Connecting to an External Amplifier ............... 30
Setting the Digital Output ................................ 30
Setting Bass Focus .......................................... 41
Speaker Setup ................................................. 41
Setting of Dolby Digital ................................. 41
Adjusting the speaker levels ........................ 41
Mixing bass sound to the rear channel ........ 42
Adjusting the acoustic image ...................... 42
Achieving powerful high volume sound ..... 43
Adjusting the DVD Level ............................... 43
Using the Pro Logic II Mode .......................... 43
Linear PCM Setting ........................................ 44
Storing Settings in the Memory ...................... 44
Recalling the Preset Memory ......................... 44
DVD Setup
DVD Setup Operation ..................................... 30
Setting the language ......................................... 31
Setting the TV Screen ...................................... 31
Setting the Country Code ................................. 31
Setting the Rating Level (Parental Lock) ......... 32
Confirming the current Preset
No./EQ mode .............................................. 44
Remote Control Operation ............................. 45
Audio Setup
Audio Setup Operation ................................... 33
Setting the Digital Output ................................ 33
Setting the Downmix Mode ............................. 34
2-EN
Autogood products internet store http://130.com.ua
01GB03DVA9861RiTOC.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 3 Wednesday, December 7, 2005 12:00 PM
iPod™ (Optional)
Playback .......................................................... 46
Searching for a desired Song .......................... 46
Searching by Playlist ................................... 46
Searching by artist name ............................. 46
Searching by album name ........................... 47
Searching by song name .............................. 47
Direct Search Function ................................... 47
Installation and
Connections
Warning .................................................. 62
Caution ................................................... 62
Precautions ............................................ 62
Installation ...................................................... 63
Select Playlist/Artist/Album ........................... 48
Connections .................................................... 65
Quick Search ................................................... 48
System Example ............................................. 67
Random Play Shuffle (M.I.X.) ....................... 48
Repeat Play ..................................................... 48
Displaying the Text ......................................... 48
Changer (Optional)
Controlling CD Changer (Optional) ............... 49
Quick Search ................................................... 49
a
.u
Playing MP3 Files with the CD Changer
(Optional) .................................................... 49
Multi-Changer Selection (Optional) ............... 49
m
o
c
.
Remote Control
Controls on Remote Control ........................... 50
When Using the Remote Control .................... 51
0
13
Battery Replacement ....................................... 51
Information
About DVDs ................................................... 52
Terminology .................................................... 53
List of Language Codes .................................. 54
List of Country Codes ..................................... 55
In Case of Difficulty ....................................... 57
Specifications .................................................. 61
Autogood products internet store http://130.com.ua
3-EN
01GB03DVA9861RiTOC.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 4 Wednesday, December 7, 2005 12:00 PM
Operating Instructions
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed. Rupture or chemical leakage from the battery
may cause fire or personal injury.
a
.u
PRECAUTIONS
m
o
c
.
Product Cleaning
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
0
13
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
Maintenance
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
4-EN
Autogood products internet store http://130.com.ua
01GB04DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 5 Wednesday, December 7, 2005 12:00 PM
Never Attempt the Following
Correct Handling
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
a
.u
New Discs
m
o
c
.
As a protective measure to prevent the CD from jamming, the CD
player will automatically eject discs with irregular surfaces or
inserted incorrectly. When a new disc is inserted into the player and
ejected after initial loading, using your finger, feel around the
inside of the centre hole and outside edge of the disc. If you feel
any small bumps or irregularities, this could inhibit proper loading
of the disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ballpoint pen or other such
instrument, then insert the disc again.
Centre Hole
Bumps
0
13
Centre Hole
New Disc
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Outside
(Bumps)
Transparent Sheet
Disc Stabilizer
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Installation Location
Make sure the DVA-9861Ri will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Autogood products internet store http://130.com.ua
5-EN
01GB04DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 6 Wednesday, December 7, 2005 12:00 PM
Discs playable on this unit
Discs that cannot be played
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA
files), photo CDs, etc.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded Content
DVD region number (playable region number)
Disc size
12 cm*
DVD Audio
This DVD player will play back any disc whose region number is 2
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
Audio + Video
2
8 cm
ALL
12 cm*
DVD Video
Video CDs
Audio + Video
8 cm
12 cm
DIGITAL VIDEO
Video CD
This DVD head unit is compatible with playback control (PBC)
compatible video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialogue style.
Audio + Video
Using compact discs (CD/CD-R/CD-RW)
8 cm
12 cm
Music CD
a
.u
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliant
with ISO9660 level 1 or level 2. For details, see pages 17 and 18.
m
o
c
.
Audio
8 cm
(CD single)
* Two-layer DVD disc compatible
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA formatted audio files.
0
13
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDs
The DVA-9861Ri plays DVD Audio, DVD Video, Video CD,
Audio CD and has a built in MP3/WMA decoder.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA encoded CD-R/RW
files).
What is the difference between an Audio and MP3/WMA CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio) is a data file that uses a
compression scheme to reduce the size of the music file.*
6-EN
Autogood products internet store http://130.com.ua
01GB04DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 7 Wednesday, December 7, 2005 12:00 PM
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:
The DVA-9861Ri can read either sector on the disc. Choose CDDA to play the CD audio section or MP3/WMA to play the MP3/
WMA section.*
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD. The DVA-9861Ri can only read multisession
DATA Formatted discs (MP3/WMA files - Not Audio CD files).
Properly formatted MP3/WMA Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions*.
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
• “DTS” and “DTS2.0 + Digital Out” are trademarks of Digital
Theater Systems, inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer llS and Thomson”
• “Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com.”
a
.u
m
o
c
.
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
0
13
• This unit is compatible with discs recorded in the DVD-Video
and DVD-VR mode.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format. (Discs or files utilizing copy protection,
may not be playable. Some recording systems may not properly
format copied files to enable proper playback.)
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Autogood products internet store http://130.com.ua
7-EN
01GB04DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 8 Wednesday, December 7, 2005 12:00 PM
To close the front panel, press the left side until it locks as
shown in the figure below.
Getting Started
SOURCE/
POWER
(OPEN)
Rotary encoder
3
MODE
Grasp the front panel firmly, slide to the left
pull
to remove.
, then
TITLE
Turning Power On and Off
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any other button except TITLE,
Rotary encoder and
(OPEN).
Press and hold SOURCE/POWER for at least 2 seconds
to turn off the unit.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
• Do not leave the front panel open, or drive the car with the panel
open as it may result in accident or malfunction.
• The first time power is turned on, the volume will start from level 12.
a
.u
m
o
c
.
Attaching
Detaching and Attaching the Front Panel
1
Be sure to push the Rotary encoder inside the unit before opening the
front panel so that the front panel will open completely, otherwise it
may be damaged.
2
0
13
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the left side of the front panel until it locks
firmly into the main unit.
Push the Rotary
encoder inside
When you push the Rotary encoder again, it pops back out.
The Rotary
encoder pops out
Detaching
1
2
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Turn off the unit power.
Press
8-EN
(OPEN) to open the front panel.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 9 Wednesday, December 7, 2005 12:00 PM
Initial System Start-Up
Radio
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
2
3
Rotary
encoder
Turn off the unit power.
SOURCE/
BAND
POWER
Press
(OPEN) to open the front panel, then
remove it.
Press RESET with a ballpoint pen or similar pointed
object.
MODE
FUNC.
1
Adjusting Volume
Turn the Rotary encoder until the desired sound is
obtained.
2
Press SOURCE/POWER until a radio frequency
appears in the display.
a
.u
Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1)
3
4
5
0
13
Press and hold TITLE for at least 2 seconds while
the time is displayed.
The time indication will blink.
F3 (FM3)
MW
LW
F1 (FM1)
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
OFF (Manual mode)
DX SEEK
Press TITLE repeatedly until the time is displayed.
For details, see “Displaying the Text” (page 27).
F2 (FM2)
m
o
c
.
3
Setting Time
2
Preset buttons
(1 through 6)
Listening to Radio
RESET switch
1
TUNE/
A.ME
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
When the hour has been adjusted, press MODE.
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
4
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by pressing
TITLE.
Press
or
Holding down
continuously.
to tune in the desired station.
or
will change the frequency
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold MODE for at least 2 seconds after
setting the “hour.” Minutes will reset to 00. If the display shows over
“30” minutes when you do this, the time will advance one hour.
Autogood products internet store http://130.com.ua
9-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 10 Wednesday, December 7, 2005 12:00 PM
Manual Storing of Station Presets
Frequency Search Function
1
You can search for a radio station by its frequency.
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
1
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
2
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
3
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
• If the “FUNC” indicator is illuminated, turn off the indicator by
pressing FUNC., then you can perform the operation.
Press and hold
for at least 2 seconds in Radio
mode to activate Frequency Search mode.
Turn the Rotary encoder to select the desired
frequency.
Press MODE to receive the selected frequency.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or the search mode will be cancelled when an operation has
not been performed in 10 seconds.
Automatic Memory of Station Presets
1
2
Press BAND repeatedly until the desired radio band
is displayed.
a
.u
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location no. 1.
m
o
c
.
0
13
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
2
Press BAND repeatedly until the desired band is
displayed.
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
• If the “FUNC” indicator is illuminated, turn off the indicator by
pressing FUNC., then you can perform the operation.
10-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 11 Wednesday, December 7, 2005 12:00 PM
Recalling Preset RDS Stations
RDS
TA
Rotary
encoder
TITLE
MENU
1
2
3
4
MODE
Setting RDS Reception Mode and
Receiving RDS Stations
4
5
Make sure that the “FUNC” indicator light goes out,
then press the preset button in which your desired
RDS station is preset.
If the preset station and the stations in the AF list
cannot be received:
a
.u
m
o
c
.
Press FUNC. so that the “FUNC” indicator lights up.
Press 1 AF to activate the RDS mode.
or
Press FUNC. to activate the normal mode.
The “FUNC” indicator goes out.
When the PI SEEK setting is on (refer to “PI SEEK Setting”
on page 12), the unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the area, the unit
displays the frequency of the preset station and the preset
no. disappears.
If the signal level of the Regional (Local) station being tuned
becomes too weak to receive, press the same preset button
to tune in a Regional station in other district.
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
Press
station.
Press 1 AF to activate the RDS mode.
If the preset station's signal is weak, the unit automatically
searches and tunes to a stronger station in the AF
(Alternative Frequencies) list.
FUNC. 1 AF NEWS 2 3 PTY
5
1
2
3
Press FUNC. so that the “FUNC” indicator lights up.
to tune in the desired RDS
0
13
• For presetting the RDS stations, refer to the Radio Operation section.
The RDS stations can be preset in the F1, F2 and F3 bands only.
Receiving RDS Regional (Local)
Stations
Press 1 AF again to deactivate the RDS mode.
Press FUNC. to activate the normal mode.
The “FUNC” indicator goes out.
• When the “Setting PTY31 (Emergency Broadcast) reception” (refer
to page 12) is set to on, if the unit receives the PTY31 (Emergency
Broadcast) signal, the unit will show “ALARM” in the display
automatically.
The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
1
Press MENU to select the SETUP mode, then press
MODE.
SETUP mode is activated.
BASS ENGINE
2
3
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the RDS REGIONAL
mode, then press MODE.
Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Autogood products internet store http://130.com.ua
11-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 12 Wednesday, December 7, 2005 12:00 PM
PI SEEK Setting
Setting the Time to automatically Adjust
1
If you set to ON, the time will be automatically adjusted by RDS data.
Press MENU to select the SETUP mode, then press
MODE.
SETUP mode is activated.
BASS ENGINE
2
3
4
Press
MODE.
or
SETUP
RETURN (OFF)
to select the PI SEEK, then press
Turn the Rotary encoder to select ON or OFF.
Press MENU to select RETURN.
Setting PTY31 (Emergency Broadcast)
reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
Press MENU to select SETUP mode, then press
MODE.
BASS ENGINE
2
3
4
2
3
SETUP
RETURN (OFF)
1
2
0
13
Turn the Rotary encoder to select ON or OFF.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
When an emergency broadcast is received, the volume
level will be automatically changed to the memorized level
in the traffic information mode.
For details, refer to “Receiving Traffic Information” on
page 12.
•
•
•
•
12-EN
BASS ENGINE
Press
or
to select the AUTO CLOCK
mode, then press MODE.
Turn the Rotary encoder to select ON or OFF.
Press MENU to select RETURN.
Press TA so that the “TA” indicator lights up.
a
.u
Press
or
to select your desired traffic
information station.
m
o
c
.
Press
or
to the select ALERT PTY31
mode, then press MODE.
Press MENU to select RETURN.
RETURN (OFF)
Receiving Traffic Information
BASS ENGINE
If you set to ON, emergency broadcasts are received
regardless of source.
“ALARM” is displayed during reception.
4
SETUP
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
The SETUP mode is activated.
BASS ENGINE
Press MENU to select the SETUP mode, then press
MODE.
SETUP mode is activated.
BASS ENGINE
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
1
1
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being broadcast.
If traffic information is not being broadcast, the unit is set in
the standby mode. When a traffic information broadcast
begins, the unit automatically receives it and the display
shows “TRF-INFO” for 5 seconds.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
If the traffic information broadcast signal falls below a certain level,
the unit remains in the receiving mode for 1 minute. If the signal
remains below a certain level for over 1 minute, the “TA” indicator
blinks.
If you do not want to listen to the traffic information being received,
lightly press TA to skip that traffic information message. The TA
mode will remain in the ON position to receive the next traffic
information message.
If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
In the TA mode, the SEEK tuning selects only the TP stations.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 13 Wednesday, December 7, 2005 12:00 PM
PTY (Programme Type) Tuning
1
2
Receiving Traffic Information While
Playing CD or Radio
Press FUNC. so that the “FUNC” indicator lights up.
Press 3 PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 10 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 10 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
1
2
Press
and
within 10 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type) is
being displayed.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1
minute, the “TA” indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Each press scrolls the programme type by one.
LIGHT M
4
CLASSICS
OTHER M
Press 3 PTY within 10 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
If no PTY station is found, “NO PTY” will be displayed for 10
seconds.
0
13
Press FUNC. to activate the normal mode.
The “FUNC” indicator goes out.
a
.u
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The “EON” indicator lights up while an RDS EON
station is being received. If the station being received does not
broadcast the traffic information, the receiver automatically tunes in
the related station that broadcasts the traffic information when it
occurs.
m
o
c
.
The chosen programme type display blinks during
searching and lights when a station is found.
5
Press
and
to select a traffic information
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
• If no operation is performed within 10 seconds after pressing 3 PTY,
the PTY mode will be automatically cancelled.
3
Press TA so that the “TA” indicator lights up.
• Operate the unit while the “FUNC” indicator lights up. If no
operation is performed within 10 seconds, the “FUNC” indicator
goes out.
3
Press TA to deactivate the Traffic Information mode.
The “TA” indicator goes out.
Priority News
This function allows you to give priority to the News programme. You
will never miss the News programme as the unit automatically gives
priority to the News programme whenever it begins broadcasting, and
interrupts the programme you are currently listening. This feature is
functional when your unit is set to a mode other than the LW and MW
modes.
1
2
Press FUNC. so that the “FUNC” indicator lights up
while the unit is in Radio (FM receiving) mode.
Press NEWS 2 to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display.
To disable the PRIORITY NEWS function, press NEWS 2.
• In the PRIORITY NEWS function, unlike in the TA function, the
volume does not increase automatically.
3
Press FUNC. to activate the normal mode, while the
unit is in Radio (FM receiving) mode.
The “FUNC” indicator light goes out.
Autogood products internet store http://130.com.ua
13-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 14 Wednesday, December 7, 2005 12:00 PM
Displaying Radio Text
CD/MP3/WMA
Text messages from a radio station can be displayed.
Rotary SOURCE/
(OPEN) encoder POWER
Press TITLE while receiving FM in the radio mode to
select the Radio Text display.
/
The display will change every time the button is pressed.
If there is PS (Programme Service NAME)
PS (Programme Service Name)*
PS (Programme Service Name)
Clock
Radio Text
* Press and hold TITLE for at least 2 seconds if PS is displayed in the
radio mode, frequency will be displayed for 5 seconds.
If there is no PS (Programme Service Name)
FREQUENCY
Clock
Radio Text
MODE
FUNC.
TITLE
4 5
FREQUENCY
The display shows “WAITING” for a few seconds, then starts
scrolling the text message.
• If there is no receivable text message or the unit cannot receive a text
message properly, the display shows “NO TEXT.”
Playback
1
Press
(OPEN).
The front panel will open.
2
a
.u
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
m
o
c
.
0
13
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER
DISC
IPOD*1
CHANGER*2
TUNER
*1 Only when the iPod is connected.
*2 Only when the CD changer is connected
3
While playing back MP3/WMA, press
select the desired folder.
Pressing and holding
continuously.
4
Press
or
or
or
to
will change folders
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
Press
.
Fast forward:
Press and hold
14-EN
.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 15 Wednesday, December 7, 2005 12:00 PM
5
To pause playback, press
Pressing
6
/
/
.
Repeat Play
again will resume playback.
To eject the disc, press
to open the front panel.
, after pressing
(OPEN)
4 to play back repeatedly the track being
Press
played.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
for at least 2 seconds.
• The CD-player can play discs containing audio data, MP3 data and
WMA data.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If is pressed during M.I.X. DISC playback, new file will be played
back in a random sequence. If
is pressed, the beginning of the
current file will be played back.
The track (file) will be played repeatedly.
MP3/WMA Play Display
• If REPEAT is set to ON during M.I.X. (M.I.X. ONE) play in CD
changer mode, M.I.X. will apply to the current disc only.
The folder number and file number will be displayed as described
below.
F01 T03 10'15
Press
4 again and select RPT
to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back
: A disc is repeatedly played back
*1 When a CD changer is connected
MP3/WMA mode :
a
.u
: Only a file is repeatedly played back
: Only files in a folder are repeatedly played back
Folder number
display
File number
display
Elapsed time
m
o
c
.
: A disc is repeatedly played back
• Press TITLE to switch the display. Please see “Displaying the Text”
(page 27) for information about display switching.
• If the folder number or file number is three digits, F or T becomes
numbers of hundred rank.
0
13
*2 When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press FUNC. to illuminate the “FUNC”
indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In CD changer mode, press FUNC. twice to illuminate the “FUNC”
indicator, and go to the step above within 10 seconds.
Autogood products internet store http://130.com.ua
15-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 16 Wednesday, December 7, 2005 12:00 PM
M.I.X. (Random Play)
Searching from CD Text
Press 5
Tracks can be searched and played using the CD text on the disc. In the
case of discs and changers that do not support text, searches can be
made using the track numbers.
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
1
again.
Press
during play.
This will set the search mode.
Internal CD mode :
: Tracks are played back in random sequence.
2
Turn the Rotary encoder to select the desired
track, then press MODE.
This will play the selected track.
: M.I.X. mode off
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation has
not been performed in 10 seconds.
• CD text search cannot be made during M.I.X. play.
CD Changer mode :
: Tracks are played back in random sequence.
: The tracks on all the CDs in the current
magazine will be included in the random
playback sequence.
File/Folder Name Search
(concerning MP3/WMA)
You can display and search for the folder and file name while listening
to the file currently being played back.
a
.u
Main Unit Operation
2
MP3/WMA mode :
0
13
: Only files in a folder are played back in
random sequence.
During MP3/WMA playback, press
search mode.
to activate the
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, then press
.
: Files are played back in random sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
Folder Name Search mode
: M.I.X. mode off
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation has
not been performed in 10 seconds.
• While in Folder Name Search mode, press
to switch to File Name
Search mode.
• While in Folder Name Search mode, press FUNC. to return to the
selecting search mode.
• If a disc contains only the root folder, Folder Name Search cannot be
made.
• “ROOT” is displayed for the root folder which does not have folder
name.
• Folder Name search cannot be made during M.I.X. play.
* When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In CD changer mode, press FUNC. to illuminate the “FUNC”
indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In CD changer mode, press FUNC. twice to illuminate the “FUNC”
indicator, and go to the step above within 10 seconds.
16-EN
1
m
o
c
.
• If M.I.X. is set to ON during RPT
(REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
3
4
Turn the Rotary encoder within 10 seconds to
select the desired folder.
Press
folder.
/
to play back the first file in the selected
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 17 Wednesday, December 7, 2005 12:00 PM
File Name Search mode
3
4
5
Press
or
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
to select another Folder.
Select the desired file by turning the Rotary
encoder within 10 seconds.
Method for creating MP3/WMA files
Press MODE to play back the selected file.
• Press and hold
for at least 2 seconds in the search mode to
cancel. Or, the search mode will be cancelled when an operation has
not been performed in 10 seconds.
• While in the File Name Search mode, press FUNC. to switch to the
previous mode (Folder Search mode or the selecting search mode).
• File Name search cannot be made during M.I.X. play.
Remote Control Operation
1
2
Supported playback sampling rates and bit rates
MP3
Sampling rates: 32 kHz - 48 kHz
Bit rates:
32 - 320 kbps
Press and hold
/ /SEARCH for at least 2
seconds during playback.
WMA
Sampling rates: 32 kHz - 48 kHz
The Folder Name list is displayed on the optional monitor
screen.
Bit rates:
Press
ENT.
or
to select a folder name, then press
The File Name list of the selected folder is displayed.
3
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user's manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 7.1, 8 and 9 are supported)
Press
or
to select a file name, then press ENT.
The selected file is played back.
32 - 320 kbps
Note that for sampling rates, this device’s frame display
(page 27) may not display correctly.
This device may not play back correctly depending on sampling
rates.
a
.u
ID3 tags/WMA tags
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
m
o
c
.
• When there are 8 or more names on the list, press
or to change
the page.
• Press RETURN to deactivate the Search mode during the Folder
Name Search mode.
• While in File Name Search mode, press RETURN to switch to Folder
Name Search mode.
• While in Folder Name Search/File Name Search mode, press and
hold
/ /SEARCH for at least 2 seconds to cancel the Folder
Name Search/File Name Search mode.
About MP3/WMA
CAUTION
0
13
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether
for free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international
treaty.
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“NO SUPPORT” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW
(DVD-R/DVD-RW) using CD-R writing software. A disc can hold
up to 1024 files/256 folders (including Root Folders).
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
Autogood products internet store http://130.com.ua
17-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 18 Wednesday, December 7, 2005 12:00 PM
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Order of files
DVD/Video CD
In this section, both remote control and main unit operation are
described.
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder no. and file no. indicated on the display.
(OPEN)
SOURCE/
POWER
/
Root folder
4
DN
UP
a
.u
RETURN
m
o
c
.
/
Folder
Terminology
Bit rate
0
13
MP3/WMA File
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
MENU
CLR
DISP./TOP M.
ENT.
Numeric
Keypad
(0 to 9)
ANGLE
SUBTITLE
AUDIO
• DVD/Video CD operations can be performed from both the remote
control and the main unit. In this section, both remote control and
main unit operations are described.
• To view DVD/Video CD, the optional TV monitor is required.
• DVA-9861Ri automatically changes the video output signal (NTSC or
PAL), according to the disc. To set NTSC or PAL on the connected
monitor, refer to the Owner's Manual of the monitor.
Disc types that can be used for each heading are
represented by the following marks.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
The root folder is found at the top of the file system. The root folder
contains all folders and files.
18-EN
DVD Commercial Audio discs can be used.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW/DVD+R/DVD+RW recorded in a video
mode can be used.
DVD-R/DVD-RW discs recorded in DVD-VR
mode can be used.
Video CD discs can be used.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 19 Wednesday, December 7, 2005 12:00 PM
If a menu screen appears
Playing a Disc
On DVDs and video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
Caution
• Not all functions will operate for every DVD. See the individual
DVD’s instructions for details on the features supported.
• Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints on the
playback side. Clean the disc if necessary.
• When using the remote control, be careful to press only one
button at a time. Pressing multiple buttons at the same time may
cause erroneous operation.
• If you try to perform an invalid operation (based on the type of
disc being played), the following mark is displayed on the
monitor screen:
Play Position Memory Function
Even if you turn power off or switch the Ignition Key to OFF during
playback or change the source, playback will continue from the point
where playback stopped when the power is turned ON again.
1
Press
(OPEN).
DVD menu
Press , ,
press ENT.
or
to select the desired item, then
• For some discs it is possible to select items directly from the menu
screen using the number keys (“0” to “9”).
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode” on
page 35.)
Video CD menu
Use the numeric keypad (“0” to “9”) to select the
desired number, then press ENT.
• The menu screen does not appear when the PBC function is turned
off. In this case, set VCD PLAY MODE to turn on the PBC function.
For details, refer to “Setting the Video CD Play Mode” (page 35).
The front panel will open.
2
• This operation is controlled using the remote control unit.
• For many discs, the menu screen can also be displayed by pressing
MENU.
Insert a disc with the label side facing up.
a
.u
The disc will be pulled into the unit automatically.
Searching by Programme
m
o
c
.
• This operation is performed by the remote control unit.
1
0
13
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER
on the main unit to switch to the DISC mode.
The programme search list screen is displayed.
2
TUNER
DISC
IPOD*
CHANGER*
2
TUNER
*1 Only when the iPod is connected
*2 Only when the CD changer is connected
3
To eject the disc, press
to open the front panel.
, after pressing
Press or
press ENT.
to select the desired programme, then
The selected programme is played back.
The mode will change every time the button is pressed.
1
Press and hold DISP./TOP M. for at least 2 seconds
while playing a DVD-VR disc.
• If PLAY LIST is selected, the playlist search list screen is displayed.
Searching by Playlist
(OPEN)
• This operation is performed by the remote control unit.
• Do not remove a disc during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the disc does not eject, press and hold
for at least 2 seconds.
• The reverse side of a double-sided DVD will not be played
automatically. Remove the disc, turn it over, and reinsert it.
• Never insert map discs for navigation purposes as they could damage
the equipment.
• Refer also to “DVD Setup” (pages 30 to 32).
1
Press MENU while playing DVD-VR disc.
The playlist search list screen is displayed.
2
Press or
press ENT.
to select the desired playlist, then
The selected playlist is played back.
• Only discs containing a playlist can be used.
• If PROGRAM LIST is selected, the programme search list screen is
displayed.
Autogood products internet store http://130.com.ua
19-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 20 Wednesday, December 7, 2005 12:00 PM
DVD Audio (VOFF mode)*
Stopping Playback (PRE-STOP)
1
Press
during playback to stop playback. That position is stored in
memory.
1
During playback, press
on the remote control unit.
“PRE-STOP” is displayed.
2
Press
/
in the PRE-STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• When “VOFF” is set, PRE-STOP function is not available for the
DVD Audio disc. (Refer to “Setting the DVD Audio Playback Mode”
on page 35.)
During playback or pause, press and hold
reverse) or
(fast-forward).
When pressed for more than 1 second, the disc is
forwarded/reversed at 21 times the normal speed.
2
Release
or
* Set “VCAP” (Video Capable Audio Player) or “VOFF” (Video OFF)
in Custom Setup. For details, refer to “Setting the DVD Audio
Playback Mode” (page 35).
• No sound is played during fast-forwarding/fast-reversing.
• Fast-forwarding/fast-reversing of only a track being played back can
be made on the Video CD equipped with PBC (play back control).
• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
During playback, press
twice on the remote control
“STOP” is displayed, and playback stops.
• Playback stops also when
is pressed for more than 2 seconds.
• Playback starts from the beginning when
/ is pressed while
playback is stopped.
• When VOFF is set, press
once to stop DVD audio playback
(STOP). Refer to “Setting the DVD Audio Playback Mode”
(page 35).
DVD Audio (VCAP mode)*/DVD Video/Video CD
During playback, press and hold
or
(fast-forward).
(fast-reverse)
When pressed for more than 1 second, the disc is
forwarded/reversed at double speed.
When held in 5 more seconds, the disc is forwarded/
reversed at 8 times the normal speed.
When held in 10 more seconds, the disc is forwarded/
reversed at 21 times the normal speed.
2
Release
20-EN
or
or
.
The chapter/track switches each time the button is pressed, and
playback of the selected chapter/track starts.
a
.u
:Press this to start playback from the beginning of the
following chapter or track.
:Press this to start playback from the beginning of the
current chapter or track.
m
o
c
.
0
13
Fast-forwarding/Fast-reversing
1
to return to normal playback.
Finding the Beginning of Chapters or
Tracks
Stopping Playback
During playback, press
unit.
(fast-
• Some DVDs do not have chapters.
• The beginning of a track may not be found on the Video CD equipped
with PBC (playback control). Set VCD PLAY MODE to turn the PBC
function off. Refer to “Setting the Video CD Play Mode” (page 35).
• During pause, operation can be performed for DVD Audio.
Supplementary explanations
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
video and music CDs.
“Groups” associate a track (one song) with other tracks
stored on a DVD-Audio.
Group playback differs, depending on the disc.
“Playlists” specify a range of images and their playback
order.
• Only discs containing a playlist can be used.
to return to normal playback.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 21 Wednesday, December 7, 2005 12:00 PM
Selecting Programme/Playlist
Searching by Title Number
During playback or pause, press
,
on the unit or
UP, DN on the remote control to select the previous or
next programme/playlist.
Use this function to easily find positions on the DVD using the DVD’s
title.
The programme/playlist switches each time the button is
pressed, and playback of the selected programme/playlist
starts.
, UP:
, DN:
1
Press this to start playback from the beginning of the
following programme or playlist.
Press this to start playback from the beginning of the
previous programme or playlist.
• Only when a playlist is managed on the disc, playlist can be selected
and operation can be performed.
Playing Still Frames (pausing)
1
2
During playback, press
Press
/
/
to resume playback.
Press
/
Press ENT.
Playback starts from the selected title number.
• While in PRE-STOP, this function finds the beginning of the chapter
by its number.
• This function cannot be used on discs on which no title numbers are
recorded.
• Press CLR to delete the last digit in the title number. Press and hold
CLR for at least 2 seconds to cancel the input mode.
• The playback starts automatically for two digit title numbers even if
ENT. in procedure 2 is not pressed.
m
o
c
.
0
13
or
a
.u
A group number on a DVD identifies various audio sections similar to
chapters for video. Use this function to easily find positions on the DVD
using its group number.
•
This operation is performed by the remote control unit.
Playback starts from the selected group number.
.
The picture advances or reverses by one frame each time
the button is pressed.
2
When playback stops, input the number of the title
you want to play using the numeric keypad (“0” to
“9”).
When playback stops, input the number of the group you
want to play using the numeric keypad (“0” to “9”).
Forward/reverse frame-by-frame
Playback
In the pause mode, press
2
This operation is performed by the remote control unit.
Searching by Group Number
.
• No sound is played during the still mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
1
•
• While in PRE-STOP, this function finds the beginning of the track by
its number. For operation, refer to “Searching Directly by Chapter or
Track Number” (page 22).
• This function cannot be used on discs on which no group numbers
are recorded.
to resume normal playback.
• No sound is output during forward/reverse frame-by-frame playback.
• For DVD-VR and video CD, reverse frame-by-frame playback is not
available.
Searching by Programme or Playlist
Number
Slow Motion Playback
Use this function to easily find positions on the DVD using the DVD’s
programmes/playlists.
•
1
1
When
or
is pressed and held in while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion speed
switches to 1/2 the normal speed.
2
Release
playback.
or
to pause, and press
/
to
• No sound is played during slow motion playback.
• Slow playback is not available when playing back a slide show.
• 1/2 and 1/8 are approximate speeds. The actual speed differs from
disc to disc.
• For DVD-VR and video CD, reverse slow motion playback is not
available.
2
This operation is performed by the remote control unit.
When playback stops, input the number of the
programme or playlist you want to play using the
numeric keypad (“0” to “9”).
Press ENT.
Playback starts from the selected programme or playlist
number.
• While in PRE-STOP, this function finds the beginning of the chapter
by its number.
• This function cannot be used on discs on which no programme or
playlist numbers are recorded.
• Press CLR to delete the last digit in the programme/playlist number.
Press and hold CLR for at least 2 seconds to cancel the input mode.
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
Autogood products internet store http://130.com.ua
21-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 22 Wednesday, December 7, 2005 12:00 PM
Searching Directly by Chapter or Track
Number
DVD Video
The chapter is played repeatedly.
The title is played repeatedly.
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
•
1
2
The mode returns to normal
playback. (Factory default)
This operation is performed by the remote control unit.
During playback, pre-stop or pause, input the
chapter or track number you want using the
numeric keypad (“0” to “9”).
DVD-VR (while playing back programme)
The chapter is played repeatedly.
Press ENT.
Playback starts from the selected chapter or track.
The programme is played repeatedly.
• This function cannot be used on discs on which no chapter numbers
are recorded.
• During stop, search can be made for Video CD.
• The beginning of a track number cannot be directly found on the
Video CD equipped with PBC (playback control). Set VCD PLAY
MODE to turn the PBC function off. Refer to “Setting the Video CD
Play Mode” (page 35).
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number. Press
and hold CLR for at least 2 seconds to cancel the input mode.
Repeat Playback
The chapter is played repeatedly.
The playlist is played repeatedly.
0
13
4 on the main unit.
a
.u
The mode returns to normal
playback. (Factory default)
m
o
c
.
The repeat mode switches each time the button is pressed.
DVD Audio (VCAP mode)*1
DVD-VR (while playing back Playlist)
VIDEO CD
Use this function to play the disc’s titles, chapters, tracks, etc.,
repeatedly.
During playback, press
All programmes are played repeatedly.
(Factory default)
The track is played repeatedly.
The group is played repeatedly.
The mode returns to normal playback.
(Factory default)
The track is played repeatedly.
The entire disc is played repeatedly
(Factory default)
Playback does not repeat.
*1 Set “VCAP” or “VOFF” in Custom Setup. For detail, refer to
“Setting the DVD Audio Playback Mode” (page 35).
*2 Displayed only in the changer mode.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to “Setting the Video CD Play Mode” (page 35).
• For some discs it is not possible to switch the repeat mode.
• During DVD Video playback, pressing and holding
4 for at least
2 seconds will change the unit to REPEAT OFF.
DVD Audio (VOFF mode)*1
The track is played repeatedly.
The group is played repeatedly.
The entire disc is played repeatedly.
(Factory default)
22-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 23 Wednesday, December 7, 2005 12:00 PM
Switching the Audio Tracks
Switching the Subtitles (subtitle
language)
For discs with multiple audio or audio languages, you can switch the
audio language temporarily during playback.
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
•
• This operation is performed by the remote control unit.
This operation is performed by the remote control unit.
During playback, press AUDIO.
During playback, press SUBTITLE.
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
During DVD-VR playback, the display of the subtitle is set to ON
or OFF.
• The selected audio track becomes the default setting every time the
power is turned on or the disc is replaced. If a disc does not include
the language you selected for the default audio track, the disc’s
default language is selected instead. Refer to “Setting the language”
(page 31).
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
DVD-VR/Video CDs with multiplex audio
DVD-VR
During playback, press and hold AUDIO for at least 2
seconds.
The left and right channels will be output as shown below, each
time the button is pressed.
LR
LL
RR
Switching from the disc menu.
For some discs, the audio language, angle and subtitles can be
switched from the disc menu.
DVD Video
0
13
During playback, press AUDIO.
The left and right channels will be output as shown below, each
time the button is pressed.
LL
RR
LR
Switching the Angle
a
.u
Tips
m
o
c
.
LR
Video CD
LR
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD’s menu.
• The selected subtitle language becomes the default setting every time
the power is turned on or the disc is replaced. If a disc does not
include that language, the disc’s default language is selected instead.
Refer to “Setting the language” (page 31).
• For some discs, the subtitles will be displayed even when this is set to
off.
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode” on
page 35.)
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
• This operation is performed by the remote control unit.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc
each time the button is pressed.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode” on
page 35.)
1. Press MENU, select the item, then press ENT.
2. Press , ,
or
to select the language or
angle, then press ENT.
(For some discs, they can be selected using the
numeric keypad “0” to “9” while the language or the
angle menu is displayed.)
DVD Audio
1. Press and hold DISP./TOP M., select the item, then
press ENT.
2. Press , ,
or
to select the language or
angle, then press ENT.
(For some discs, they can be selected using the
numeric keypad “0” to “9” while the language or the
angle menu is displayed.)
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode”
on page 35.)
Autogood products internet store http://130.com.ua
23-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 24 Wednesday, December 7, 2005 12:00 PM
DVD-VR display example
Displaying the Disc Status
Current chapter
number
Playback disc
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD on the monitor
screen.
• This operation is performed by the remote control unit.
Display of disc
text information
Current
programme
or playlist
number
DVD–VR
1
The playback status is displayed.
18
1:23'45"
PLAY
REPEAT D I SC
AUDIO:1/2
LR
DOLBY D 3 / 2.1
Playback status
Repeat setting
(Default setting
REPEAT DISC)
During playback, press DISP./TOP M.
N T SC
INFO.
TV system
(NTSC or PAL)
Chapter
playback time
Current audio
signal output
Current audio number/status
The playback status display closes when DISP./TOP M. is
pressed again.
DVD Audio display example
Current track
number
Playback disc
Current group
number
Playback status
Repeat setting
(Default settingREPEAT OFF)
Current audio
language/
number
Current subtitle
language/number
Video CD display example
DVD–A
1
TV system
(NTSC or PAL)
N T SC
18
1:23'45"
PLAY
REPEAT OFF
A UD I O
1 1
ML P 9 6 k 2 4 b 6
SUBT. : JPN 1 / 2
ANGLE: 1 / 3
Track playback
time
Current audio
signal output
Current title
number
Playback status
Repeat setting
(Default settingREPEAT OFF)
Current audio
language/number
Current subtitle
language/number
24-EN
1
TV system
(NTSC or PAL)
N T SC
18
1
1 2 ' 3 4 "
Track playback
time
a
.u
Current audio status
m
o
c
.
0
13
Current chapter
number
DVD–V
Playback
status
Repeat setting
(Default setting REPEAT DISC)
VCD
• When PBC is set to ON, the current track number and track playback
time is not displayed.
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to "Setting the DVD Audio Playback Mode" on
page 35.
Playback disc
Current track
number
Playback
control (PBC)
Current angle
number
DVD Video display example
Playback disc
1:23'45"
PLAY
REPEAT OFF
AUDIO:ENG 1/4
DOLBY D 3 / 2.1
SUBT. : JPN 1 / 2
ANGLE: 1 / 3
Current angle
number
Chapter
playback time
Current audio
signal output
Scroll to Move the Page Forward or Back
“Page” is still image stored on a DVD-Audio disc.
• This operation is performed by the remote control unit.
During playback, press and hold 1 for at least 2 seconds
to display the previous still image. Pressing and holding
2 for at least 2 seconds will display the next still image.
Pressing and holding 3 for at least 2 seconds will display
the home page.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
• If the DVD-Audio disc is set to “VCAP”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode” on
page 35.)
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 25 Wednesday, December 7, 2005 12:00 PM
Setting the Bass Control
Sound Setting
Rotary
encoder
You can change the Bass Frequency emphasis to create your own tonal
preference.
SOURCE/
POWER BAND MENU
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE
2
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the BASS (bass Centre
frequency) control mode.
BASS
TREBLE
Setting the Bass Centre Frequency
MODE
3-1 Press SOURCE/POWER to select the desired bass
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Defeat
1
centre frequency.
80Hz
100Hz
120Hz
60Hz
80Hz
Emphasizes the displayed bass frequency ranges.
Setting the Bass Bandwidth
Press MODE repeatedly to choose the desired
mode.
a
.u
3-2 Press BAND to select the desired bass bandwidth.
Each press changes the modes as follows:
BASS
TREBLE
SUBW*
DEFEAT
VOLUME
BASS
Bass Level: –7 ~ +10
Treble Level: –7 ~ +7
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
BALANCE
m
o
c
.
FADER
0
13
Changes the boosted bass bandwidth to wide or narrow. A
wide setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
• If MODE is not pressed within 5 seconds after selecting the BASS,
TREBLE, BALANCE, FADER, DEFEAT or SUBW mode, the unit
automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS
and TREBLE will return to the factory defaults.
• Depending on the connected devices, some functions and display
indications do not work.
Autogood products internet store http://130.com.ua
25-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 26 Wednesday, December 7, 2005 12:00 PM
Setting the Bass Level
Setting the Treble Level
3-3*Turn the Rotary encoder to select the desired bass
4
3-2*Turn the Rotary encoder to select the desired
level (–7~+10).
treble level (–7~+7).
You can emphasize or weaken the bass level.
You can emphasize the treble level.
4
Press MENU to select RETURN.
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the bass control
setting will be turned off automatically.
• The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass band width settings adjusted for one source
are effective for all other sources (FM, MW (LW), CD etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if an
audio processor with the Bass function is connected.
• This function is inoperable when DEFEAT is set to ON.
• While in the bass adjusting mode, TREBLE CONTROL adjusting
mode can be recalled by pressing
or
.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
• This function is inoperable when DEFEAT is set to ON.
• While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing
or
.
* The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 25).
* The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 25).
a
.u
Bass level indicator’s display
Bass level is usually displayed.
Turning Loudness On/Off
m
o
c
.
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
0
13
Setting the Treble Control
Press and hold the MODE for at least 2 seconds to
activate or deactivate the loudness mode.
“LD” indicator lights.
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
BASS ENGINE
2
SETUP
RETURN (OFF)
BASS ENGINE
Press
or
to select the TREBLE (treble
Center frequency) control mode.
BASS
TREBLE
Setting the Treble Centre Frequency
3-1 Press SOURCE/POWER to select the desired treble
Centre frequency.
10.0kHz
12.5kHz
15.0kHz
7.5kHz
10.0kHz
Emphasizes the displayed Treble frequency ranges.
26-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 27 Wednesday, December 7, 2005 12:00 PM
About the indication display
Other Functions
When displaying Text, the following indicators are lit according
to the mode.
TITLE
The position of a song being played back is shown lit in
the total number of songs shown. The display example is
as shown below. Also lights when operation, such as fast
forward, etc., is performed.
FUNC.
Lights up when a disc is inserted
Displaying the Text
Song position display example
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name, and the tag, etc., while playing
MP3/WMA files.
<First half>
a
.u
” is displayed.
The display will change every time the button is pressed.
Indicator/
Mode
The display in Radio mode:
PS (Programme Service Name)*1
PS (Programme Service Name)
Clock
Clock
0
13
Radio Text
MP3/WMA
Mode
iPod Mode
—
While
displaying
Folder Name
—
—
While
displaying
File Name
—
—
While
displaying
Artist Name*
While
displaying
Artist Name*
While
displaying Text
(Disc Name)
While
displaying
Album
Name*
While
displaying
Album
Name*
While
displaying Text
(Track Name)
While
displaying
Song Name*
While
displaying
Song Name*
Radio Text
If there is no PS (Programme Service Name)
FREQUENCY
CD Mode
m
o
c
.
If there is PS (Programme Service NAME)
FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
TEXT (DISC NAME)*2
TEXT (TRACK NAME)*2
TRACK NO./ELAPSED TIME
The display in MP3/WMA mode:
FOLDER NO./FILE NO./ELAPSED TIME
FOLDER NO./FILE NO./CLOCK
FOLDER NAME*3
FILE NAME*3
ARTIST NAME*4
ALBUM NAME*4
SONG NAME*4
FRAME*5
FOLDER NO./FILE NO./ELAPSED TIME
*1 Pressing and holding TITLE for at least 2 seconds in the PS display
mode, “FREQUENCY” will be displayed for 5 seconds.
*2 Displayed during playback of a disc with CD Text.
If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed. If there is a changer, “D TEXT”/
“T TEXT” is displayed.
*3 “ROOT” is displayed for the folder name of the root folder which
does not have folder name.
If there is no folder name or file name, “FOLDER”/“FILE” is
displayed.
*4 ID3 tag/WMA tag
If an MP3/WMA file contains ID3 tag/WMA tag information, the ID3
tag/WMA tag information is displayed (song name, artist name, and
album name). All other tag data is ignored.
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” will
be displayed.
If “SCROLL AUTO” is set in “Scroll Setting (TEXT SCROLL)”
(page 29), tag information will automatically be scrolled.
*5 The recording sampling rate and bit rate of the MP3/WMA file are
displayed. A WMA file of variable bit rate displays the average bit
rate.
<Last half>
• For example, when the 5th of 10 songs in the disc is played back,
“
Press TITLE.
<Middle>
*Tag information
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• You cannot display title or text information for DVD or video CD.
Autogood products internet store http://130.com.ua
27-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 28 Wednesday, December 7, 2005 12:00 PM
• When the Scroll Setting (page 29) is set to “SCROLL MANU,” press
and hold TITLE for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
Rotary
encoder
SOURCE/
POWER
BAND
MENU
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 27).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time.
MODE
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
Blackout Mode On and Off
When Blackout mode is turned on, the display and button illumination
will turn off to reduce power consumption. This additional power
enhances the sound quality.
1
a
.u
Press MENU to select the SETUP mode, then press
MODE.
m
o
c
.
BASS ENGINE
Press and hold FUNC. for at least 2 seconds to activate
the blackout mode.
The display and button illumination will turn off.
0
13
A data file downloaded from the ALPINE Owner’s website is written to
a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVA-9861Ri.
The wallpaper file can be saved and displayed as long as a disc is not
inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is
stopped.
• If several files are stored in a disc, only the first file will be stored on
the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
• Up to 2 files can be stored on this unit. If a third file is downloaded,
the first file is overwritten and new one memorized.
• To change the wallpaper, press and hold ENT. on the remote control
unit for at least 2 seconds while disc is not inserted, or while PRESTOP or STOP is set in disc mode.
• Even if the battery power cable is removed, the downloaded data is
not cleared.
28-EN
RETURN (OFF)
BASS ENGINE
SETUP mode is activated.
2
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds
Setting the Wallpaper
SETUP
Press
or
to select the desired SETUP
menu, then press MODE.
(e.g. Select SUBWOOFER)
FM LEVEL
RDS REGIONAL*1
PI SEEK*2
ALERT
PTY31*3
AUTO CLOCK*4
ILLUMINATION
DIMMER
SUBWOOFER
(SUBW SYSTEM)*5
PLAY MODE
SCROLL TYPE
TEXT SCROLL
INT MUTE
AUX IN
(AUX NAME)*6
POWER IC
OPT OUTPUT
DEMO
FM LEVEL
*1 Refer to “Receiving RDS Regional (Local) Stations” (page 11).
*2 Refer to “PI SEEK Setting” (page 12).
*3 Refer to “Setting PTY31 (Emergency Broadcast) reception”
(page 12).
*4 Refer to “Setting the Time to automatically Adjust” (page 12).
*5 Displayed only when SUBW is ON.
*6 Displayed only when AUX is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 29 Wednesday, December 7, 2005 12:00 PM
Scroll Setting (TEXT SCROLL)
Sound Customizing
SCROLL AUTO / SCROLL MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3/WMA files, folder
names, and tags.
Adjusting Source Signal Levels
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
If the difference in volume level between the CD player and FM radio is
too great, adjust the FM signal level.
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
• The unit scrolls CD text names, folder names, file names or tag
display.
1 Press MODE repeatedly to select the SUBW mode.
BASS
TREBLE
SUBW
BALANCE
DEFEAT
VOLUME
BASS
SCROLL AUTO: The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
SCROLL MANU: The display is scrolled when a disc is loaded
or when a track is changed, etc.
Demonstration
FADER
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
2 Adjust the level by turning the Rotary encoder.
• To quit Demo mode, set to DEMO OFF.
Setting the Subwoofer System
SUBW SYS1 (Initial setting) / SUBW SYS2
External Device
Select either SYS1 or SYS2 for the desired subwoofer effect.
SUBW SYS1: Subwoofer level changes according the main
volume setting.
SUBW SYS2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Changing Lighting Colour
ILLUMI BLUE (Initial setting) / GREEN / AMBER / RED
0
13
You can change the lighting colour of the following six buttons:
SOURCE/POWER, BAND,
/ /TUNE/A.ME, MENU,
.
GREEN
AMBER
RED
CDDA (Initial setting) / CDDA/MP3
a
.u
Perform this setting when connecting MP3 changer. MP3 changer can
playback CDs containing both CD and MP3 data. However, in some
situations (some enhanced CDs), playback may be difficult. For these
special cases, you can select playback of CD data only. When a disc
contains both CD or the MP3 data, playback starts from the CD data
portion of the disc.
m
o
c
.
Visual Customizing
BLUE
Connecting an MP3 Changer (PLAY MODE)
CDDA :
Only CD data can be played back.
CDDA/MP3 : Both CD data and MP3 file tracks can be played
back.
and
• According to the lighting colour of the above six buttons, the colour
of the other buttons also changes.
When the colour of the six buttons is BLUE/AMBER/RED, the colour
of the others is RED. When the colour of the six buttons is GREEN,
the others are also GREEN.
• Change discs after performing this setting.
Turning Mute Mode On/Off (INT MUTE)
MUTE ON (Initial setting) / MUTE OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX Mode (V-Link)
Dimmer Control
AUX IN ON / AUX IN OFF (Initial setting)
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
• If your vehicle should have a dimmer control for the dashboardlights,
never connect the DIMMER cable (orange) of the radio to this
dimmer control.
Scroll Type Setting
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX name display when AUX IN ON is set. Select
the AUX name by pressing
or
, then press MODE. Then
turn the Rotary encoder.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX mode
and then press BAND to select your desired device.
Choose from two scrolling methods.
Select the type you prefer.
SCROLL TYPE1: The characters scroll sequentially, appearing
from the right side of the display.
SCROLL TYPE2: The characters are displayed one by one, and
disappear one by one from the left side of the
display after the screen is filled up with the
characters.
Autogood products internet store http://130.com.ua
29-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 30 Wednesday, December 7, 2005 12:00 PM
Connecting to an External Amplifier
POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
DVD Setup
POWER IC OFF : Use this mode when the front and rear preamplifier of the unit are used to drive an
external amplifier connected to the speakers.
In this setting, the head unit’s internal amplifier
has no output to drive speakers.
ENT.
Front
left
Amplifier
RETURN
Front
right
Amplifier
Numeric
keypad
(0 to 9)
Rear
left
CLR
Rear
right
SETUP
POWER IC ON : The speakers are driven by the built-in
amplifier.
a
.u
Speakers
SPEAKER
RIGHT FRONT
DVD Setup Operation
Front
right
m
o
c
.
• DVD Setup Operation is performed by the remote control unit.
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Rear
right
0
13
Rear
left
The following 4 steps are common to each of the DVD settings.
Refer to the specific section for details.
1
The setup menu appears on the monitor.
S E T UP
L
T
P
A
C
Front
left
• No sound is produced by the system when the power output is set to
OFF.
• If an external amplifier only for the subwoofer is connected, set to
ON.
Press SETUP before inserting a disc, or when in
stop mode.
2
Setting the Digital Output
A
V
A
U
U
N G
S
R E
D I
S T
U
C
N
O
O
A G E
R E E
T A L
S E
M S
S
N
1 6 9
O F F
W I D E
D E
T U P
E T U P
Press
or
to select your desired setting item,
then press ENT.
Further items will be displayed.
OPT OUT ON / OPT OUT OFF (Initial setting)
Setting items:
To connect to a digitally to an audio processor, the optical digital output
must be turned ON.
• If DVD Audio is used, sound is output via Ai-NET regardless of this
setting.
LANGUAGES / TV SCREEN / PARENTAL / AUDIO SETUP*1 /
CUSTOM SETUP*2
*1 Refer to “Audio Setup” on page 33.
*2 Refer to “Custom Setup” on page 35.
3
4
Press , ,
press ENT.
or
to change the setting, then
When the setting is complete, press SETUP.
The setup returns to normal mode.
30-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 31 Wednesday, December 7, 2005 12:00 PM
• When settings are changed, old settings are overwritten. Make a note
of the current settings before making changes. If the vehicles battery
is disconnected, the settings will be cleared and will return to the
factory settings.
Setting the language
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (Not all discs allow
changing the default language. If not, the factory default language
applies.)
Setting item: LANGUAGES
Further setting items: AUDIO / SUBTITLE / MENU
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the
subtitles displayed on the
screen.
MENU:
Set the language used for the
menus (title menu, etc.).
Setting the TV Screen
Use the procedure described below to set the output screen according to
the type of TV monitor being used.
Setting item: TV SCREEN
Setting contents: 16:9 (WIDE) / 4:3 (LETTER BOX) / 4:3 (PAN
SCAN)
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
• Press RETURN to return to the previous screen.
16:9 (WIDE)
Select this when connected
to a wide screen TV. This is
selected upon shipment
from the factory.
S E T UP
L A N G U A G E S
A U D I O
A U T O
S U B T I T L E
A U T O
M E N U
A U T O
4:3 (LETTER BOX)
Select this when connected to a
conventional 4:3 size (normal TV
aspect ratio) monitor. There may be
black bands visible at the top and
bottom of the screen (when playing
a 16 : 9 size movie). The width of
these stripes will depend upon the
original aspect ratio of the theatre
release of the movie.
Setting contents:
a
.u
AUDIO mode / MENU mode:
AUTO *1 / ENGLISH / JAPANESE / GERMAN / SPANISH /
FRENCH / ITALIAN / SWEDISH / CHINESE / OTHERS *2
m
o
c
.
SUBTITLE mode:
AUTO *1 / ENGLISH / JAPANESE / GERMAN / SPANISH / OFF /
FRENCH / ITALIAN / SWEDISH / CHINESE / OTHERS *2
Press
ENT.
,
,
or
4:3 (PAN SCAN)
Select this when
connected to a
conventional 4:3 size
monitor. The picture will fill
the entire TV screen.
However, due to the
mismatch in aspect ratio,
parts of the movie at the
extreme left and right
sides will not be visible (when playing a 16 : 9 size movie).
to select your desired language, then press
0
13
*1 AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
*2 OTHERS:
Set this to play the disc with a language other than one of
the languages displayed. Press ENT. then use the numeric
keypad “0” to “9” to input the 4-digit language code. Then
press ENT. again. For the language codes, refer to “List of
Language Codes” (page 54).
• If you change the language setting when the disc is inside, the setting
is decided with one of the following operations.
- Turn OFF the main unit
- Switch the source on the head unit.
• To temporarily change the language of the current disc, either do so
from the DVD menu or using the operation described in the section
“Switching the Audio Tracks” (page 23).
• If the disc does not include the selected language, the disc’s default
language is set.
• Languages set upon shipment from the factory:
Audio language : AUTO
Subtitle language : AUTO
Menu language : AUTO
• Press RETURN to return to the previous display.
Setting the Country Code
Set the country code of which you want to set the rating level (Parental
lock).
Setting item: PARENTAL
Further setting item: COUNTRY CODE
Setting contents: CODE
1 Press
or
to select “PARENTAL,” then press ENT.
The password input mode is activated.
2 Use the numeric keypad “0” to “9” to input the 4-digit
password, then press ENT.
PASSWORD * * * *
Input numbers are displayed as “*.“
The default password is 1111 upon shipment from the
factory.
The PARENTAL display appears.
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
• If the password is wrong, the unit returns to the password input
display, after displaying “PASSWORD ERROR” for 3 seconds.
Autogood products internet store http://130.com.ua
31-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 32 Wednesday, December 7, 2005 12:00 PM
3 Press
or
to select “COUNTRY CODE,” then press
ENT.
4 Press
or
to select AUTO or OTHERS.
If AUTO is selected, press ENT.
AUTO: The primary country code among those recorded
is played.
OTHERS: The setting content changes to “OTHER” if the
desired country code is input.
If AUTO is selected, go to step 6. If OTHERS is selected,
go to step 5.
5 Use the numeric keypad “0” to “9” to input the 4-digit
country code, then press ENT.
Example: Germany “6869” is input
6 When the setting is complete, press SETUP.
The setup returns to normal mode.
• If you want to change the password, select “CHANGE PASSWORD”
in step 3. Input the new password (4 digits) and press ENT.
• Write down the password on a piece of paper and store the piece of
paper somewhere in case you forget it.
• If the input code is wrong, the unit returns to the country code input
display, after displaying “CODE ERROR” for 3 seconds.
• For the country codes, refer to “List of Country Codes” (pages 55
and 56).
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
Setting the Rating Level (Parental Lock)
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
1 Press
or
to select “PARENTAL,” then press ENT.
The password input mode is activated.
2 Use the numeric keypad “0” to “9” to input the 4-digit
password, then press ENT.
0
13
Input numbers are displayed as “*.“
The default password is 1111 upon shipment from the
factory.
The restriction level (PARENTAL LEVEL) input display
appears.
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
• If the password is wrong, the unit returns to the password input
display, after displaying “PASSWORD ERROR” for 3 seconds.
32-EN
SET UP
PARENTAL >> LEVEL
OFF
8
7
6
5
4
3
2
1
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level.
The lower the number, the higher the rating level.
• Press RETURN to return to the previous display.
5 When the setting is complete, press SETUP.
The setup returns to normal mode.
• If you want to change the password, select “CHANGE PASSWORD”
in step 3. Input the new password (4 digits) and press ENT.
• Write down the password on a piece of paper and store the piece of
paper somewhere in case you forget it.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable the play of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
a
.u
m
o
c
.
Setting item: PARENTAL
Further setting item: PARENTAL LEVEL
PASSWORD * * * *
3 Press
or
to select “PARENTAL LEVEL,” then press
ENT.
4 Press , , or to select the restriction level (1 to 8),
then press ENT.
Tips
• Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen “PARENTAL
LEVEL CHANGE OK?”
• To change parental level and play, press ENT.
The password input mode is displayed. Input the 4-digit
password you set in “Setting the Rating Level (Parental
Lock)”, then press ENT.
• To play without changing the parental level, press .
(When
is pressed, playback will be at the parental level
set with “Setting the Rating Level (Parental Lock).”)
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 33 Wednesday, December 7, 2005 12:00 PM
5
Audio Setup
When the setting is complete, press SETUP.
The setup returns to normal mode.
• When settings are changed, old settings are overwritten. Make a note
of the current settings before making changes. If the vehicle’s battery
is disconnected, the settings will be cleared and will return to the
factory settings.
Setting the Digital Output
Use the following procedure to set the digital audio signal output from
the DVA-9861Ri.
Setting item: DIGITAL OUT
Further setting items: DOLBY D / DTS
ENT.
RETURN
Press
ENT.
or
to select your desired setting item, then press
Sets Dolby Digital output.
The initial setting is BITSTREAM.
Sets DTS output.
The initial setting is BITSTREAM.
DOLBY D:
DTS:
SETUP
Setting contents: BITSTREAM / LPCM
Press
ENT.
Audio Setup Operation
The following 5 steps are common to each of the Audio Setup
settings. Refer to the specific section for details.
0
13
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
S E T UP
L
T
P
A
C
2
3
A
V
A
U
U
N G
S
R E
D I
S T
U
C
N
O
O
Press
ENT.
A G E
R E E
T A L
S E
M S
S
N
1 6 9
O F F
W I D E
D E
T U P
E T U P
or
to select BITSTREAM or LPCM, then press
a
.u
BITSTREAM:The digital output is switched automatically
according to the type of audio signal being
played.
Be sure to select “BITSTREAM” when you
want to connect a digital audio processor and
play Dolby Digital audio. “BITSTREAM” is
selected upon shipment from the factory.
LPCM:
The audio signal recorded on the disc is
converted to 48 kHz/16 bit (for DVDs) or 44.1
kHz (for video CDs and CDs) linear PCM
audio signals for output.
m
o
c
.
• Audio Setup Operation is performed by the remote control unit.
1
or
• Press RETURN to return to the previous screen.
to select “AUDIO SETUP,” then press
Press
or
to select your desired setting item,
then press ENT.
AUDIO SETUP items:
DIGITAL OUT/ DOWNMIX MODE
S E T UP
A U D I O
S E T U P
D I G I T A L
D OWNM I X
4
Press
O U T
MO D E
or
S U R R O U N D
to change the setting, then press ENT.
Autogood products internet store http://130.com.ua
33-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 34 Wednesday, December 7, 2005 12:00 PM
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
(DVD SETUP)
Optical digital audio
output
Analog audio output
(Ai-NET, RCA output)
16/20/24bit
BITSTREAM or LPCM
44.1kHz, 16bit, LPCM
2ch (2ch Downmix)*
OK
48/96/192kHz
16/20/24bit
BITSTREAM or LPCM
48kHz, 16bit, LPCM 2ch
(2ch Downmix)*
OK
44.1/88.2/
176.4kHz
16/20/24bit
BITSTREAM or LPCM
Not output
OK
48/96/192kHz
16/20/24bit
Dolby Digital
(-EX)
(DVD-V, DVDA, DVD-VR)
48kHz
16/18/20bit
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 7.1ch)*
OK
DTS (-ES)
(CD-DA,
DVD-V, DVDA)
44.1kHz
LPCM
44.1kHz, 16bit Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
Bit stream*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
BITSTREAM
Bit stream*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
Format
Fs
Q
LPCM
(CD-DA,
DVD-V, DVDA, DVD-VR)
44.1/176.4kHz
PPCM
(DVD-A)
48/96kHz
MPEG1Layer
II
(VCD, DVD-V,
DVD-A, DVDVR)
MPEG2Layer
II
(DVD-V, DVDA, DVD-VR)
44.1kHz
16/20/24bit
16bit
48kHz
44.1kHz
16bit
0
13
16bit
a
.u
m
o
c
.
BITSTREAM
48kHz
MPEG1/2/
2.5Layer III
(MP3, WMA)
16/20/24bit
16bit
32kHz
16bit
BITSTREAM or LPCM
32kHz, 16bit, Decoded
2ch
OK
44.1kHz
16bit
BITSTREAM or LPCM
44.1kHz, 16bit,
Decoded 2ch
OK
48kHz
16bit
BITSTREAM or LPCM
48kHz, 16bit, Decoded
2ch
OK
* Not output when playing back a DVD-Audio.
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO/SURROUND ENCODED
STEREO:
Stereo Downmix
SURROUND ENCODED: Surround compatible Downmix
The initial setting at the factory is SURROUND ENCODED.
34-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 35 Wednesday, December 7, 2005 12:00 PM
5
Custom Setup
When the setting is complete, press SETUP.
The setup returns to normal mode.
• When settings are changed, old settings are overwritten. Make a note
of the current settings before making changes. If the vehicle’s battery
is disconnected, the settings will be cleared and will return to the
factory settings.
Setting the DVD Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
ENT.
RETURN
Setting item: DVD-A PLAY MODE
Setting contents: VIDEO/VCAP/VOFF
Numeric
keypad
(0 to 9)
CLR
SETUP
VIDEO: Only DVD Video is played back if the disc contains
DVD Video and Audio.
VCAP: DVD Audio is played back with Video.
VOFF: DVD Audio is played back without Video.
The initial setting at the factory is VCAP.
• Perform this setting before inserting a disc. If a disc has already been
inserted, perform the setting after you remove the disc.
Setting the CD Play Mode
Custom Setup Operation
The following 5 steps are common to each of the Custom Setup
settings. Refer to the specific section for details.
0
13
Press SETUP before inserting a disc, or when in
stop mode.
The setup menu appears on the monitor.
S E T UP
L
T
P
A
C
2
3
A
V
A
U
U
N G
S
R E
D I
S T
U
C
N
O
O
A G E
R E E
T A L
S E
M S
S
N
1 6 9
O F F
W I D E
D E
T U P
E T U P
Press
or
press ENT.
to select “CUSTOM SETUP,” then
Press
or
to select your desired setting item,
then press ENT.
CUSTOM SETUP items:
DVD-A PLAY MODE / CD PLAY MODE / VCD PLAY MODE /
BONUS CODE
S E T UP
C U S T OM
D
C
V
B
Setting item: CD PLAY MODE
Setting contents: CD-DA/COMPRESSED
m
o
c
.
• Custom Setup Operation is performed by the remote control unit.
1
a
.u
The unit can be set to play only the audio data or only the MP3/WMA
files on discs containing both audio data and MP3/WMA data.
S E T U P
CD-DA:
Only CD data can be played back.
COMPRESSED: Only MP3/WMA data can be played back.
The initial setting at the factory is CD-DA.
• If a disc has already been inserted, perform the setting after you
remove the disc.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON/PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.
Playing the Bonus Group
In addition to the usual group, DVD Audio also includes an addition
Bonus Group. When the Bonus Group is selected, although the
password input screen is displayed, you can pre-input a 4-digit
password.
Setting item: BONUS CODE
Setting contents: CODE
1 Press
or
to select “BONUS CODE”, then press ENT.
2 Use the numeric keypad “0” to “9” to input 4-digit
password, then press ENT.
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
V D – A P L A Y MO D E
V C A P
D P L A Y MO D E C OM P R E S S
C D P L A Y MO D E
P B C O N
O N U S C O D E
3 When the setting is complete, press SETUP.
The setup returns to normal mode.
4
Press
or
to change the setting, then press ENT.
• If the Bonus Group password differs from the password in the section
you set, the input screen is automatically displayed.
Autogood products internet store http://130.com.ua
35-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 36 Wednesday, December 7, 2005 12:00 PM
Adjustment Procedure for Dolby
Surround
External Audio
Processor
(Optional)
TA
Rotary
encoder
MODE
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
BAND
1
Speaker Setup (page 41)
2
Adjusting the speaker levels (page 41)
3
Mixing bass sound to the rear channel
(page 42)
Preset buttons
(1 through 6)
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated.
When PXA-H900 is connected, some of the operations may not be
performed from this unit. In this case, operate them in the connected
product. Explanations below is the case when PXA-H700 or PXA-H701
is connected for example.
Refer also to the operating instructions of the connected audio
processor.
(Turning the speakers to be used on and off and
setting their response)
(Adjusting the signal output level to the various
speakers)
a
.u
m
o
c
.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Additionally, if the MRA-F350 is connected, the
following setting “Setting the MX mode” is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510.
• If no operation is performed for approximately 15 seconds when
setting the external audio processor, the audio processor control
mode is cancelled, and the normal mode returns.
0
13
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Adjusting the acoustic image (page 42)
5
Achieving powerful high volume sound
(page 43)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
(Achieving energetic sound with even greater power,
like the sound in a movie theatre)
6
Adjusting the DVD Level (page 43)
7
Storing Settings in the Memory (page 44)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
(Storing all the settings and adjustments made on the
DVA-9861Ri (not only the above settings/adjusts) in
the memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
36-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 37 Wednesday, December 7, 2005 12:00 PM
Setting the Speakers
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used to
reproduce the sound cleanly by making use of the data quantity.
1
2
MX COMPRESS MEDIA (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of compression.
This reproduces a well-balanced sound close to the original.
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and produces
well balanced sound in all the bands.
The audio processor control mode is activated.
3
4
5
Select the SP SELECT mode by pressing TA
repeatedly.
Press MODE to select the speaker.
Select any kind of speaker or set speaker to ON/OFF
by turning the Rotary encoder.
FRONT1:
FRONT2:
REAR:
CENTER:
SUBWOOFER:
6
7
OFF/TW (Tweeter)/FULL (Full Range)
OFF/ON
OFF/ON
OFF/ON
OFF/MONO/STEREO
Repeat steps 4 and 5 to set all the speakers.
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 41).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
or
a
.u
X-OVER Adjustment
1
2
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
3
4
Select the X-OVER mode by pressing TA repeatedly.
Select L+R or L/R by pressing and holding BAND for
at least 2 seconds.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
5
.
If ON is selected, press MODE.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
4
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• There is no MX mode for MW, LW radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD.
Press and hold TA for at least 2 seconds.
Select ON/OFF of MX by pressing
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
Check that Defeat mode is off (page 25).
The MX mode of the audio processor control mode is
activated.
3
5
The audio processor control mode is activated.
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
2
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
m
o
c
.
0
13
Set MX Mode of the External Audio
Processor
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip. MX
uses this data to reproduce the sound accurately.
After setting to ON, select the desired MX level by
turning the Rotary encoder.
• Music source (such as radio broadcasts and CDs, excluding MW, LW
radio) level can be set.
Select the desired channel by pressing
then press MODE.
When L+R is selected :
FRONT 1
FRONT 2
FRONT 1
REAR
CENTER
or
,
SUBWOOFER
When L/R is selected :
FRONT 1L
FRONT 1R
FRONT 2L
FRONT 2R
REAR L
REAR R
CENTER
SUBWOOFER
FRONT 1L
• The speakers display differs, depending on the connected speakers.
Autogood products internet store http://130.com.ua
37-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 38 Wednesday, December 7, 2005 12:00 PM
6
Adjust the cut-off frequency of H.P.F. (HP FREQ) by
turning the Rotary encoder, then press MODE.
The adjustable frequency range differs depending on the
channels (speakers).
7
8
9
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷343 x 1000 = 5.1 (ms)
Adjust the slope of H.P.F. (HP SLOPE) by turning the
Rotary encoder, then press MODE.
Adjust L.P.F. by performing steps 6 and 7.
Adjust the level (LEVEL) by turning the Rotary
encoder, then press MODE.
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
Press the MODE to return to step 6.
10 To adjust other channels, repeat steps 5 to 9.
11 When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 37).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if Tweeter is
selected for FRONT1. Or, if subwoofer is set to STEREO, CENTER
adjustment is affected by the subwoofer setting.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
5.1ms
0.5m
2.25m
a
.u
m
o
c
.
Performing Time Correction Manually
(TCR)/ Phase Switching
0
13
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
Calculating the Time Correction
1
2
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
3
(distance of farthest speaker)
– (distance of other speakers)
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
This value is the time correction value for the various
speakers.
38-EN
The sound is uneven because
the distance between the
listening position and the
different speakers is different.
The difference in the distance
between the front left and rear
right speakers is 1.75 meters
(68-3/4").
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
Inputting the Time Correction
4
5
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
6
7
Select the TCR/PHASE mode by pressing TA
repeatedly.
Select L+R or L/R by pressing and holding BAND for
at least 2 seconds.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 39 Wednesday, December 7, 2005 12:00 PM
8
Select the desired channel by pressing
then press MODE.
When L+R is selected :
FRONT 1
FRONT 2
REAR
SUBWOOFER
FRONT 1
or
,
CENTER
When L/R is selected :
FRONT 1L
FRONT 1R
FRONT 2L
FRONT 2R
REAR L
REAR R
CENTER
SUBWOOFER
FRONT 1L
• The speakers display differs, depending on the connected speakers.
9
Adjust the calculated time correction value (0.00 to
20.00ms) by turning the Rotary encoder, then
press MODE.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and centre
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
2
3
4
Rotary encoder, then press MODE.
Select L+R or L/R by pressing and holding BAND for
at least 2 seconds.
When parametric EQ is adjusted, this setting will be turned
off.
5
The unit returns to the normal mode.
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 37).
• The adjustment value for FRONT2 (Speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting Bass
Focus” (page 41).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
Select the G-EQ mode by pressing TA repeatedly.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
10 Switch the phase (PHASE 0° or 180°) by turning the
at least 2 seconds.
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
Switching the Phase
11 To adjust other channels, repeat steps 8 to 10.
12 When the setting is complete, press and hold TA for
Check that Defeat mode is off (page 25).
a
.u
Select the desired channel by pressing
then press MODE.
When L+R is selected :
FRONT
REAR
CENTER
m
o
c
.
0
13
or
SUBWOOFER
When L/R is selected :
FRONT L
FRONT R
REAR L
SUBWOOFER
FRONT L
,
FRONT
REAR R
CENTER
• The speakers display differs, depending on the connected speakers.
6
Select the frequency by turning the Rotary
encoder, then press MODE.
Adjustable frequency:
FRONT/REAR/CENTER: 20Hz - 20kHz (in 1/3 octave steps)
SUBWOOFER:
20Hz - 160Hz (in 1/3 octave
steps)
7
Adjust the level (LEVEL) (±9dB 1dB step) by turning
the Rotary encoder, then press MODE.
8 To adjust other frequencies, repeat steps 6 and 7.
9 To adjust other channels, repeat steps 5 to 8.
10 When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• When the speaker is set to the “OFF” mode, the level of the graphic
equalizer for that speaker cannot be adjusted. Refer to “Setting the
Speakers” (page 37).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
Autogood products internet store http://130.com.ua
39-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 40 Wednesday, December 7, 2005 12:00 PM
10 To adjust other bands, repeat steps 6 to 9.
11 To adjust other channels, repeat steps 5 to 10.
12 When the setting is complete, press and hold TA for
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s centre frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
2
at least 2 seconds.
The unit returns to the normal mode.
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
4
Select the P-EQ mode by pressing TA repeatedly.
Select L+R or L/R by pressing and holding BAND for
at least 2 seconds.
L+R:
L/R:
Sets the same adjustment values for the left and right
channels.
Different adjustment values can be set for the left and
right channels.
Setting Bass Compressor
When graphic EQ is adjusted, this setting will be turned off.
5
Select the desired channel by pressing
then press MODE.
When L+R is selected :
FRONT
REAR
CENTER
SUBWOOFER
When L/R is selected :
FRONT L
FRONT R
REAR L
SUBWOOFER
FRONT L
REAR R
or
,
Adjustable bands:
FRONT/REAR/CENTER: 5 bands
SUBWOOFER:
2 bands
7
Select the frequency by turning and then pressing
the Rotary encoder, then press MODE.
The adjustable frequency changes according the band.
8
1
2
Check that Defeat mode is off (page 25).
m
o
c
.
CENTER
0
13
Press BAND to select the band.
a
.u
You can adjust the sound of low frequencies as desired.
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
FRONT
• The speakers display differs, depending on the connected speakers.
6
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 37).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
3
4
5
Select the BASS SOUND mode by pressing TA.
Select BASS COMP. by pressing
press MODE.
or
, then
Select the desired mode by turning the
Rotary encoder.
Bass sound is emphasized more as the mode is
sequentially switched as COMP1
2
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
6
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
Adjust the band width (Q) by turning the
Rotary encoder, then press MODE.
The band width is adjustable in 6 steps: 0.5/1/2/3/4/5
9
Adjust the level (LEVEL) (±9dB 1dB step) by turning
the Rotary encoder, then press MODE.
40-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 41 Wednesday, December 7, 2005 12:00 PM
5
Setting Bass Focus
OFF*1:
SMALL:
When no speaker is connected.
When a speaker that cannot play low
frequencies (80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies
(80 Hz or less) is connected.
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.05 ms for each of the 0 to 400 steps, audible time
correction can be achieved.
1
2
5
6
7
8
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
centre speakers cannot be set to “LARGE”.
Press and hold TA for at least 2 seconds.
Select the BASS SOUND mode by pressing TA.
Select BASS FOCUS by pressing
press MODE.
or
, then
Press MODE to select the front/rear/left/right
speaker.
Turn the Rotary encoder to set the front/rear and
left/right speakers.
To set other channels (speakers), repeat steps 5 and
6.
When the setting is complete, press and hold TA for
at least 2 seconds.
0
13
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if Decode mode is switched.
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
4
Select the SP SETUP mode by pressing TA
repeatedly.
Select the speaker by pressing the MODE.
Repeat steps 4 and 5 to set each speaker.
When the setting is complete, press and hold TA for
at least 2 seconds.
• If the centre speaker is turned “OFF,” the centre channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF,” also set the speaker setting
to “OFF.” (page 37)
• Perform the setup for all the speakers (“Front,” “Center,” “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When centre is set to “OFF”, the setting is ineffective even if centre
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
a
.u
m
o
c
.
• Any setting in Bass Focus is applied in time correction, too.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
Speaker Setup
6
7
The unit returns to the normal mode.
The unit returns to the normal mode.
1
2
(Subwoofer is set to ON/OFF only)
Check that Defeat mode is off (page 25).
The audio processor control mode is activated.
3
4
Select the speaker characteristic by turning the
Rotary encoder.
Setting of Dolby Digital
Adjusting the speaker levels
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be heard
from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the decode mode is switched.
1
2
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
4
Select the MULTI CH SETUP mode by pressing TA
repeatedly.
Select OUTPUT LEVEL by pressing
then press MODE.
Autogood products internet store http://130.com.ua
or
,
41-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 42 Wednesday, December 7, 2005 12:00 PM
5
Press MODE to select the speaker to be adjusted.
7
The test tone is produced by the selected speaker.
6
7
The unit returns to the normal mode.
Adjust the output level by turning the
Rotary encoder.
Adjust each volume level for optimum balance by
repeating steps 5 and 6.
• The adjustment range for the different speakers is –10 dB - +10 dB.
• Adjust based on the front speakers.
8
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made. Refer to “Speaker Setup” (page 41).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
This function mixes the front channel audio signals to the audio signals
output from the rear speakers, improving the sound in the vehicle’s rear
seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Check that Defeat mode is off (page 25).
4
5
Select the MULTI CH SETUP mode by pressing TA
repeatedly.
0
13
or
Select REAR MIX ON/OFF by turning the
Rotary encoder.
In most installations, the centre speaker must be placed directly between
the front passenger and driver. Using this function, the centre channel
information is distributed to the left and right speakers. This creates an
acoustic image simulating a centre speaker directly in front of each
listener. Adjusting the centre width in PL II MUSIC (see “Using the Pro
Logic II Mode” page 43), makes this function ineffective.
1
2
3
5
a
.u
Select the MULTI CH SETUP mode by pressing TA
repeatedly.
The level can adjusted in five steps: –6, –3, 0, +3 and +6.
The higher the level, the more bass is output from the rear
speakers. (The effect differs according to the software
(DVD, etc.).)
Select BI-PHANTOM by pressing
press MODE.
or
, then
Select BI-PHANTOM ON/OFF by turning the
Rotary encoder.
If ON is selected, press MODE.
If ON is set, the soundstage created is as if you are
positioned directly in front of the centre speaker by
distributing the centre speaker sound left and right.
, then
After setting to ON, turn the Rotary encoder to
adjust the level (LEVEL).
42-EN
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
6
If ON is selected, press MODE.
If ON is set, the audio signal which is output from the rear
speaker is mixed to the front audio signal.
6
Check that Defeat mode is off (page 25).
m
o
c
.
Press and hold TA for at least 2 seconds.
Select REAR MIX by pressing
press MODE.
Adjusting the acoustic image
4
The audio processor control mode is activated.
3
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF.”
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Mixing bass sound to the rear channel
1
2
When the setting is complete, press and hold TA for
atleast 2 seconds.
After setting to ON, turn the Rotary encoder to
adjust the level (LEVEL).
The level can be adjusted within the range of –5 to +5. The
higher the level, the more the position of the centre speaker
is shifted to the sides.
7
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• This adjustment is effective when the setting of the centre speaker to
SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
“OFF” in “Setting the Speakers” (page 37).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 43 Wednesday, December 7, 2005 12:00 PM
5
Achieving powerful high volume sound
With Dolby Digital, the dynamic range is compressed so that powerful
sound can be achieved at regular volume levels. This compression can
be cancelled to achieve an energetic sound with even greater power, like
the sound in a movie theatre.
This function works only in the Dolby Digital mode.
1
2
Adjust the level (LEVEL) by turning the
Rotary encoder.
The level can be adjusted in the range of –5 to +5.
6
7
Repeat steps 4 and 5 to set each level.
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
Check that Defeat mode is off (page 25).
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
4
5
Select the MULTI CH SETUP mode by pressing TA
repeatedly.
Select LISTEN MODE by pressing
press MODE.
or
, then
Select STANDARD or MAXIMUM by turning the
Rotary encoder.
STANDARD: For powerful sound at regular volume levels
MAXIMUM: For powerful sound at high volumes
6
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
0
13
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
3
4
Select the DVD LEVEL mode by pressing TA
repeatedly.
Press MODE to select the mode to be adjusted.
DOLBY D
PL II
DTS
PCM
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the rear
channel.
1
2
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
a
.u
The audio processor control mode is activated.
3
Select the D PL II/REAR mode by pressing TA
repeatedly.
m
o
c
.
Adjusting the DVD Level
1
2
Using the Pro Logic II Mode
DOLBY D
4
Select the desired mode by pressing
or
.
MOVIE MODE:
Suits the stereo TV shows and all programs encoded in
Dolby Surround. It improves the sound field directivity to
near that of discrete 5.1-channel sound.
MUSIC MODE:
Can be used for all stereo music recordings, and provides
a wide, deep sound field.
REAR FILL ON:
Depending on the input signals, the sound may only be
output from the front speakers. In this case, the “REAR
FILL” function can be used to output signals from the rear
speakers as well.
OFF: Turns D PLII/REAR function to OFF.
If MUSIC MODE is selected, the centre width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
centre channel position between the centre speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image” (page 42) are ineffective while this function is
activated.)
1 After pressing MODE, select MUSIC MODE and turn the
Rotary encoder to select CTW CONT ON/OFF.
If ON is selected, press MODE.
If ON is set, you can enjoy the optimum vocal position by
distributing the centre channel sound between the centre
speaker and L/R speaker.
2 After setting to ON, turn the Rotary encoder to adjust the
level (LEVEL).
The level can be adjusted between 0 to 7. When the level
increases, the centre channel position moves from the
centre speaker position to both sides.
Autogood products internet store http://130.com.ua
43-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 44 Wednesday, December 7, 2005 12:00 PM
5
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• This adjustment is effective when the setting of the centre speaker is
SMALL or LARGE in the speaker setup settings.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set to CENTER
“OFF” in “Setting the Speakers” (page 37).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of REAR FILL is made when REAR MIX is ON, sound is
unchanged in the rear fill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• When the setting is complete, it is recommended to store the setting
contents. For storing, refer to page 44.
1
2
Recalling the Preset Memory
1
2
Press any one of the buttons to select the preset
memory (MEMORY 1 through MEMORY 6) you want
to recall.
a
.u
Confirming the current Preset No./EQ
mode
Check that Defeat mode is off (page 25).
Press and hold TA for at least 2 seconds.
m
o
c
.
The audio processor control mode is activated.
5
Press and hold TA for at least 2 seconds.
It takes a few moment to get out the preset memory.
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
Select PCM MODE by pressing TA repeatedly.
Select 2 CH or 3 CH by turning the Rotary encoder.
1
Press and hold TA for at least 2 seconds.
The audio processor control mode is activated.
2
Press TA repeatedly to select PRESET INFO.
The current preset number and EQ mode appear in the
display.
0
13
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTER)
Check that Defeat mode is off (page 25).
The audio processor control mode is activated.
Linear PCM Setting
3
4
Press and hold for at least 2 seconds any one of the
preset buttons (1 through 6) into which you want
to store the set/adjusted value as preset memory
(MEMORY 1 through MEMORY 6).
• This function is operable only when Defeat is set to OFF.
• The stored contents will not be deleted even when battery power cord
is detached.
3
1
2
Adjust and set the value to be stored.
Preset No.
When the setting is complete, press and hold TA for
at least 2 seconds.
The unit returns to the normal mode.
• This adjustment is ineffective when the speaker is set to CENTER
“OFF” in “Setting the Speakers” (page 37).
EQ setting display
is shown.
Storing Settings in the Memory
Up to 6 set and adjusted contents can be stored on the unit.
All that are setting and adjusting items described below are stored in
one preset memory.
Setting/adjusting items
Setting the Speakers
Setting Time Correction/Switching Phase/
Setting the Bass Focus
Adjusting EQ
Adjusting X-OVER
Setting MX
Setting BASS COMP.
Setting PRO LOGIC II/Adjusting the Centre
Width*
Adjusting Dolby Surround*
Linear PCM Setting*
Refer to page
37
38, 39, 41
Displays which EQ, graphic EQ or parametric EQ is
currently set.
G: Graphic EQ
P: Parametric EQ
3
Press and hold TA for at least 2 seconds to complete
confirmation.
The unit returns to normal mode.
39, 40
37
37
40
43
41, 42, 43
44
* Depending on the input signal, sound effect may not be obtained.
44-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 45 Wednesday, December 7, 2005 12:00 PM
Remote Control Operation
Remote Control Button Name
A
A.PROC.
Switches the audio processor mode
m
o
c
.
Cancels the audio processor mode
B
Changes the adjusting item
C
Changes the adjusting item
D
BAND (more than 2 seconds)
E
F
G
ENT.
H
Numeric Keypad (1 to 6)
a
.u
Function
Recalls the audio processor mode
0
13
Unit Button
TA (more than 2 seconds)
TA
TA (more than 2 seconds)
Switches L+R or L/R
BAND (more than 2
seconds)
Adjusts the selected setting item and changes the set contents
Rotary encoder (Turn)
Adjusts the selected setting item and changes the set contents
Rotary encoder (Turn)
Changes the setting item in the selected setting item
MODE
Stores/Recalls setting value
Preset buttons (1 to 6)
Autogood products internet store http://130.com.ua
45-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 46 Wednesday, December 7, 2005 12:00 PM
Searching for a desired Song
iPod™ (Optional)
Rotary
encoder
SOURCE/
POWER
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the DVA-9861Ri can use these to ease song
searches.
/
45
6
Searching by Playlist
1
2
Press
to activate the search selection mode.
Turn the Rotary encoder to select the PLAYLIST
search mode, then press .
PLAYLIST
MODE
FUNC.
Buttons
1 through 6
TITLE
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
2
0
13
Press SOURCE/POWER to switch to the IPOD
mode.
Press
or
to select the desired song.
Return to the beginning of the current song:
Press
.
Fast backward:
Press and hold
4
3
/
/
.
To search for a song in the selected playlist
1 After selecting the playlist in step 3*1, press
to change
to the song search mode of the selected playlist.
a
.u
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• All songs in the iPod are played back by selecting the stored “iPod
name” in step 3*1.
• Playlist search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to “Direct Search Function” (page 47).
• “NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
Searching by artist name
1
2
Press
to activate the search selection mode.
Turn the Rotary encoder to select the ARTIST
search mode, then press .
PLAYLIST
3
.
4
ARTIST
ALBUM
SONG
PLAYLIST
Turn the Rotary encoder to select the desired
Artist.
Press
/
.
The selected Artist song is played back.
.
To pause playback, press
Pressing
Press
The selected Playlist is played back.
*2
Advance to the beginning of the next song:
Press
.
Fast forward:
Press and hold
PLAYLIST
m
o
c
.
• The unit cannot be used with the software versions earlier than 200502-22. For details about “iPod Software Update,” refer to the iPod
Instruction Manual.
1
SONG
3*1 Turn the Rotary encoder to select the desired
About iPod™ usable with this unit
The unit can be used with third generation and above iPod™, iPod™
photo, iPod™ mini or iPod™ nano. iPod™ Shuffle cannot be used,
however.
Playback
ALBUM
Playlist.
An iPod™ can be connected to the DVA-9861Ri by using the
proprietary ALPINE FULL SPEED™ Connection Cable (supplied).
When the DVA-9861Ri is connected by using the cable, the controls on
the iPod™ are not functional.
Third generation iPod: Ver. 2.3
Forth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
ARTIST
/
.
again will resume playback.
• If a song is playing on the iPod when it is connected to the DVA9861Ri, it will continue playing after the connection.
46-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 47 Wednesday, December 7, 2005 12:00 PM
To search for an album of the selected artist
Searching by song name
1 After selecting the artist in step 3*2, press
to change
to the album search mode of the selected artist.
2*1Turn the Rotary encoder to select an album.
3 Press
/
to play back all songs of the selected album.
1 After selecting the album in step 2*1, press
to change
to the song search mode of the selected album.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• If you choose ALL in step 3*2, and you press
/ , all songs in
iPod are played back. If you choose ALL, and you press , the
ALBUM search mode for all artists is activated.
• If you choose ALL in step 2*1, and you press
/ , all songs of the
selected artist are played back. If you choose ALL, and you press ,
the SONG search mode for the selected artist is activated.
• Artist name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to “Direct Search Function” (page 47).
3
4
0
13
Turn the Rotary encoder to select the ALBUM
search mode, then press .
ARTIST
ALBUM
SONG
PLAYLIST
Turn the Rotary encoder to select the desired
Album.
Press
/
.
to activate the search selection mode.
Turn the Rotary encoder to select the SONG
search mode, then press .
4
ARTIST
ALBUM
SONG
PLAYLIST
Turn the Rotary encoder to select the desired
Song.
Press MODE.
The selected song is played back.
• While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• Song name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to “Direct Search Function” (page 47).
a
.u
Direct Search Function
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG
mode, you can quickly target any song.
m
o
c
.
to activate the search selection mode.
PLAYLIST
*3
3
1
Searching by album name
Press
Press
PLAYLIST
To search for a song of the selected album
1
2
1
2
The selected Album is played back.
To search for a song of the selected album
1 After selecting the album in step 3*3, press
to change
to the song search mode of the selected album.
In the search mode, press any one of the buttons 1
through 6 to quickly jump skip over a designated
percent of your song content.
SONG search example:
If there are 100 songs in your iPod, they are divided into 6
groups using percentages (shown below). These groups
are assigned to buttons 1 through 6 on the unit.
Example 1:
Suppose the song you are searching for is located at
around the middle (50%) of your library: press button 4 to
jump to the 50th song and turn the Rotary encoder to find
the song you desire.
Example 2:
Suppose the song you are searching for is located near
the end (83%) of your library: press button 6 to jump to
the 83rd song and turn the Rotary encoder to find song
you desire.
2 Turn the Rotary encoder to select a song and press
MODE.
The selected song is played back.
• While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
• While in the search mode, pressing FUNC. will return to the previous
mode.
• If you choose ALL in step 3*3, and you press
/ , all songs in the
iPod will be played back. If you choose ALL, and you press , the
SONG search mode for all albums is activated.
• Album name search cannot be made during M.I.X. play.
• In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to “Direct Search Function” (page 47).
All 100 songs (100%)
0%
17%
33%
50%
67%
83%
Preset
buttons
1
2
3
4
5
6
Songs
First
song
17th
song
33rd
song
50th
song
67th
song
83rd
song
Autogood products internet store http://130.com.ua
47-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 48 Wednesday, December 7, 2005 12:00 PM
Shuffle All:
Select Playlist/Artist/Album
Shuffle ALL plays all songs in the iPod randomly. Any one song does
not play back again until all songs have been played back.
Playlist/Artist/Album can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
1
Press
or
Album.
1
The songs will be played back in random sequence.
M.I.X.
(off)
(Shuffle ALL)
to select the desired Playlist/Artist/
• If search selection mode is not activated, only SONG is searched, this
operation is not possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X.) playback, this operation is not possible.
Press 6.
2
M.I.X.
To cancel M.I.X. play, select (off) with the above
procedure.
• If Shuffle All is selected, the selected songs which are being played
back in the search mode are cancelled.
Quick Search
Repeat Play
You can search for songs.
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
2
Press and hold
for at least 2 seconds to activate
Quick Search mode.
1
4.
Press
The file will be played repeatedly.
Turn the Rotary encoder to select a desired song.
RPT
(off)
(Repeat One)
The selected song is played back immediately.
• While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
• If there are many songs in iPod, it may take time to search for songs.
2
RPT
a
.u
To cancel repeat play, select (off) with the above
procedure.
m
o
c
.
• During repeat playback, no other songs are selectable by pressing
or
.
Random Play Shuffle (M.I.X.)
Displaying the Text
0
13
The Shuffle function of the iPod is displayed as M.I.X. on the
DVA-9861Ri.
Shuffle Albums:
You can display the tag information of a song in the iPod.
Album shuffle playback plays back all songs in order, then randomly
selects the next album. All songs of that album are played back in order,
and so on. Any one album is played just once.
Shuffle Songs:
Song shuffle randomly plays back certain selected songs. Any one song
plays back just once until all songs have been played back.
1
Press 5
.
The songs will be played back in random sequence.
M.I.X.
(Shuffle Albums)
2
M.I.X.
(Shuffle Songs)
(off)
M.I.X.
To cancel M.I.X. play, select (off) with the above
procedure.
• For details of the search mode, refer to “Searching for a desired
Song” (page 46).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
48-EN
Press TITLE.
Each press changes the display.
TRACK No./ELAPSED TIME
TRACK No. / CLOCK
ARTIST NAME*
ALBUM NAME*
SONG TITLE*
TRACK No./ELAPSED TIME
* TAG information
If the Scroll setting (page 29) is set to “SCROLL AUTO,” the tag
information will scroll automatically.
* “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
• When the Scroll Setting (page 29) is set to “SCROLL MANU,”
press and hold TITLE for at least 2 seconds to scroll the tag
information only once.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128 (128
byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the DVA-9861Ri.
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 49 Wednesday, December 7, 2005 12:00 PM
Quick Search
Changer
(Optional)
Rotary
encoder
SOURCE/
POWER
You can search for tracks (files).
1
2
BAND
Press and hold
for at least 2 seconds in the
Changer mode to activate Quick Search mode.
Turn the Rotary encoder within 10 seconds to
select a desired track (file).
The selected track is played back immediately.
• Quick Search mode is canceled by pressing and holding
least 2 seconds.
for at
Playing MP3 Files with the CD Changer
(Optional)
/
FUNC.
Select buttons
(1 through 6)
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the AiNET input of this unit, the CD Changer will be controllable from this
unit.
Using the KCA-400C (Multi-Changer Switching device) or the KCA410C (Versatile Link Terminal) multiple changers can be controlled by
this unit.
See “Multi-Changer Selection” on page 49 for selecting the CD
Changers.
0
13
Press SOURCE/POWER to activate the CHANGER
mode.
The display shows the disc number and track number.
• The source indicator varies depending on the connected source.
• Press BAND to switch the Disc mode in the Changer mode.
2
3
a
.u
Press any one of the disc select buttons(1
through 6) corresponding to one of the discs
loaded in the CD Changer.
m
o
c
.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
2
Press SOURCE/POWER to switch to the MP3
Changer mode.
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and CD
playback starts.
• After selecting the desired disc, you can operate in the same way as
for the CD player of this unit.
For details, please see the CD/MP3/WMA section.
• If the “FUNC” indicator is illuminated, the disc select buttons
become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is the same as
for the 6-disc CD Changer. To select discs numbered from 7 to 12,
first press FUNC. to choose the disc select mode (7 to 12). This
changes the “D” indicator to “d”. Then press the desired select
button. The select buttons 1 to 6 will represent discs 7 to 12
respectively.
To pause playback, press
Pressing
/
/
.
again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA” pages 14 to 18.
Multi-Changer Selection (Optional)
Alpine's Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
2
Press SOURCE/POWER on this unit to activate the
CD Changer mode.
Press BAND to activate the CD Changer Selection
mode.
The CD Changer Selection mode remains active for several
seconds.
3
Press BAND until the desired CD Changer indicator
appears on the display.
• If the selected CD Changer is not connected, the display will show
“NO CHGR-No.”
• To operate the selected changer, see “CD/MP3/WMA” (page 14-18).
• For further details about the external input (AUX) when using KCA410C, see “Setting the AUX Mode (V-Link)” on page 29.
Autogood products internet store http://130.com.ua
49-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 50 Wednesday, December 7, 2005 12:00 PM
F
Remote Control
Button
Radio mode:SEEK (DN) button
CD /Changer mode:
Press the button to go back to the beginning
of the current track. Press and hold to fast
reverse.
MP3/WMA/iPod mode:
Press the button to go back to the beginning
of the current file. Press and hold to fast
reverse.
DVD/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more than 1 second
to reverse the disc at double speed. Hold for more than
5 seconds to reverse the disc at 8 times the normal
speed. Hold for more than 10 seconds to reverse the
disc at 21 times the normal speed. However, during
playback or pause, pressing and holding for at least 1
second will fast reverse the disc at 21 times the normal
speed (DVD Audio (VOFF mode)only).
• When pressed and held in while in the pause mode, the
disc is played in reverse slow motion at 1/8th the normal
speed. When held in for 5 more seconds, the reverse
slow motion speed switches to 1/2 the normal speed
(only DVD Video).
• During pause, each time press once is played back
frame by frame (only DVD Video).
Controls on Remote Control
G
/
a
.u
Button
m
o
c
.
Switches between play and pause.
SEARCH Button
MP3/WMA mode: Pressing more than 2 seconds, activates
the Folder/File Name Search mode.
A PWR Button
Turns the power ON and OFF.
B SRC Button
Selects the audio source.
C DN Button
0
13
Radio mode: Selects, in descending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (DN) Button selects the folder.
DVD mode: Selects programme or playlist, in descending
order (DVD-VR only).
Changer mode:
DISC Select (DN) Button selects a disc in
descending order.
MP3 compatible CD changer mode:
Pressing and holding the DISC Select (DN)
button will select a disc in descending order.
iPod mode: Selects playlist/artist/album in descending
order.
D VOLUME
/
Button
Increase or decreases the volume level.
E RETURN Button
DVD/Video CD (PBC ON) mode: Returns to the previous
display. (Does not return in some discs.)
H
Button
Performs stop.
DVD/Video CD: Pressing once sets the PRE- STOP;
Pressing twice sets stop.
I MENU Button
DVD mode:
• Shows the menu display (DVD Video,
DVD Audio only).
• Shows the playlist search list screen
(DVD-VR only).
J CLR Button
Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased, or the input mode is
cancelled.
K DISP./TOP M. Button
DVD/Video CD/MP3/WMA mode:
Shows playback status.
DVD mode:
• By pressing more than 2 seconds,
shows the menu display (DVD Video,
DVD Audio only).
• By pressing more than 2 seconds,
shows the programme search list
screen (DVD-VR only).
L SETUP Button
DVD SETUP list display appears.
M AUDIO Button
DVD/Video CD mode: Switches audio.
50-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 51 Wednesday, December 7, 2005 12:00 PM
W ANGLE Button
N BAND Button
DVD mode: Switches the angle of the picture.
Radio mode:
Changes the band.
CD/MP3/WMA/Changer mode:
Switches the disc mode.
X SUBTITLE Button
DVD mode: Switches the subtitle.
O A.PROC. Button
When Using the Remote Control
Press the button to call the audio processor list.
P MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
Q UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (UP) Button to select the folder.
DVD-mode: Selects programme or playlist, in ascending
order (DVD-VR only).
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
MP3 compatible CD changer mode:
Pressing and holding the DISC Select (UP)
button will select a disc in ascending order.
iPod mode:
Selects a playlist/artist/album in ascending
order.
R
,
,
,
a
.u
Battery Replacement
Battery type: CR2025 battery or equivalent.
Selects an item displayed in the screen.
m
o
c
.
S ENT. Button
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
Enters the selected item.
T
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Button
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA/iPod mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
0
13
DVD/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more than 1 second
to forward the disc at double speed. Hold for more than 5
seconds to forward the disc at 8 times the normal speed.
Hold for more than 10 seconds to forward the disc at 21
times the normal speed. However, during playback or
pause, pressing and holding for at least 1 second will
fast forward the disc at 21 times the normal speed (DVD
Audio (VOFF mode) only).
• When pressed and held in while in the pause mode, the
disc is played in slow motion at 1/8th the normal speed.
When held in for 5 more seconds, the slow motion speed
switches to 1/2 the normal speed (DVD-Video, DVD-VR,
Video CD only).
• The picture is forwarded by one frame each time the
button is pressed in the pause mode (DVD-Video, DVDVR, Video CD only).
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
U Numeric Keypad
Inputs numbers.
V MONITOR Button
• Placing a battery in backwards way may cause a malfunction.
Not used.
Autogood products internet store http://130.com.ua
51-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 52 Wednesday, December 7, 2005 12:00 PM
3
Closing the cover
Information
Slide the cover as illustrated until a click is heard.
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital data is
recorded. The data is represented as microscopic pits recorded into the
track these pits are read by a laser beam to play the disc. On DVDs, the
density of the tracks and pits is twice that of CDs, so DVDs can contain
more data in less space.
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
may result in an accident.
Controllable With Remote Control
Point the remote control transmitter at the remote control
sensor.
CDs
Minimum pit
length - 0.9 µm
a
.u
DVDs
Remote control sensor
m
o
c
.
Minimum pit
length - 0.9 µm
0
13
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
1.2 mm
0.6 mm
0.6 mm
Track pitch 1.6 µm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of music.
In addition, DVDs provide sharp picture quality with vivid colours
thanks to a horizontal resolution of over 500 lines (compared to less
than 300 for VHS tape). With the addition of an optional, digital audio
processor (PXA-H900, PXA-H701, etc.), you can recreate the power
and presence of a movie theatre with Dolby Digital 5.1-channel
Surround.
In addition, DVDs offer a variety of functions.
• Multiple audio* (page 23)
Movies can be recorded in up to eight languages. The
desired language can be selected from the remote control.
• Subtitles function* (page 23)
Movies can include subtitles in up to 32 languages. The
desired subtitle language can be selected from the remote
control.
• Multi angle function* (page 23)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the remote control.
• Multi story function*
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of
the same movie.
Operation differs from disc to disc. Story line selection
screens including instructions appear during the movie. Just
follow the instructions.
* The functions, audio languages, subtitle languages, angles, etc.,
differ from disc to disc. For details, refer to the disc’s instructions.
52-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 53 Wednesday, December 7, 2005 12:00 PM
Dolby Pro Logic
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technology developed by
Dolby Laboratories that allows large quantities of audio data to be
efficiently recorded on discs. It is compatible with audio signals from
mono (1 channel) all the way up to 5.1-channel surround sound. The
signals for the different channels are completely independent, and since
the sound is high quality digital there is no loss of sound quality.
* The separately sold digital audio processor (PXA-H900, PXA-H701,
etc.) is required to enjoy full 5.1-channel surround sound.
The DVA-9861Ri performs Dolby Digital decoding when it outputs
analog audio signals; 2-channel audio, not 5.1-channel.
Dolby Pro Logic is the technology used to decode programs encoded in
Dolby Surround. Pro logic decoding will provide you with four
channels of sound (front left/right, centre and monaural rear surround)
from a 2-channel (stereo) source.
* The separately sold digital audio processor (PXA-H900) is required
to enjoy Dolby Pro Logic surround sound.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over the entire
frequency range.
This is done with an advanced, high sound quality matrix surround
decoder which draws out the spatial properties of the original recording
without adding any sounds to or changing the sound of the source.
* The separately sold digital audio processor (PXA-H701, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs. Whereas music
CDs are recorded at 44.1 kHz/16 bits, DVDs are recorded at 48 kHz/16
bits to 96 kHz/24 bits, thereby achieving higher sound quality than
music CDs.
Center
speaker
a
.u
Front
speakers
Rating levels (parental lock)
m
o
c
.
Rear
speakers
Subwoofer
0
13
This is a DVD function for restricting the viewing age as stipulated by
censorship laws in different countries. The way in which viewing is
restricted differs from DVD to DVD. Sometimes the DVD cannot be
played at all, other times certain scenes are skipped, and other times
certain scenes are replaced with other scenes.
Speaker layout for enjoying
Dolby Digital sound/DTS sound
DTS
This is a home-use digital sound format of the DTS Sound System. This
is a high quality sound system, developed by Digital Theater Systems,
Inc. for use in movie theatres.
DTS has six independent sound tracks. The theatre presentation is fully
realized in the home, etc. DTS is the abbreviation for Digital Theater
System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H900, PXA-H701, etc.). The DVD
video software must also have a DTS sound track.
The DVA-9861Ri has a built-in DTS 2-channel audio decoder. Analog
audio outputs are available.
Autogood products internet store http://130.com.ua
53-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 54 Wednesday, December 7, 2005 12:00 PM
List of Language Codes
(For details, see page 31.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
54-EN
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
a
.u
m
o
c
.
0
13
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 55 Wednesday, December 7, 2005 12:00 PM
List of Country Codes
(For details, see page 31.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Country
Abbreviation
Andorra
DM
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
Country
Abbreviation
Dominica
KI
Dominican Republic
KM
Algeria
KN
Ecuador
KP
Estonia
Egypt
KR
Western Sahara
KW
Eritrea
KY
Spain
KZ
Ethiopia
LA
Finland
Fiji
LB
Falkland Islands
LC
Micronesia, Federated States of
LI
Faroe Islands
LK
France
LR
Gabon
LS
United Kingdom
LT
Grenada
LU
Georgia
LV
French Guiana
LY
Ghana
MA
Gibraltar
MC
Greenland
MD
Gambia
MG
Guinea
MH
Guadeloupe
MK
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
a
.u
m
o
c
.
0
13
Code
7573
7577
7578
7580
Autogood products internet store http://130.com.ua
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
55-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 56 Wednesday, December 7, 2005 12:00 PM
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
List of Country Codes_end
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
a
.u
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
m
o
c
.
0
13
56-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 57 Wednesday, December 7, 2005 12:00 PM
Radio
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle's ignition off.
• Improper power lead (Red) and battery lead (Yellow)
connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
a
.u
CD/MP3/WMA/DVD/Video CD
Disc Player not functioning.
• Out of operating temperature range +50°C (+120°F) for CD.
- Allow the vehicle's interior (or trunk) temperature to cool.
Disc playback sound is wavering.
• Moisture condensation in the disc unit.
- Allow enough time for the condensation to evaporate (about 1
hour).
m
o
c
.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake wire is not connected.
- Connect the monitor’s parking brake wire and set the parking
brake. (For details, refer to the monitor’s instructions.)
0
13
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be unclear, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn out.
- Replace the monitor’s fluorescent tube.
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Re-insert the disc following the instructions in the “loading and
unloading discs” section.
Unable to fast forward or reverse the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc.
Consult your nearest ALPINE dealer.
Autogood products internet store http://130.com.ua
57-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 58 Wednesday, December 7, 2005 12:00 PM
Disc playback sound skips without vibration.
• The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Indication for CD Player
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
Error displays
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
MP3 is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” on pages 17-18, then rewrite in
the format supported by this device.
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to playback with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Image stops sometimes.
• Disc is scratched.
- Replace with a non-scratched disc.
Audio
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
• Mechanism error.
1) Press the
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
a
.u
m
o
c
.
0
13
The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.
- POWER IC is switched to “ON” (page 30).
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• When “ERROR” is displayed:
If that the disc cannot be ejected by pressing , press the RESET
switch (refer to page 9) and press
again.
If the disc still cannot be ejected, consult your Alpine dealer.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
58-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 59 Wednesday, December 7, 2005 12:00 PM
Indication for DVD/Video CD Player
(Audio display)
(Audio display)
(Monitor display)
(Monitor display)
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press
again for at least 2 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
(Audio display)
a
.u
(Audio display)
(Monitor display)
(Monitor display)
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press
again for at least 2 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
m
o
c
.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following step:
Press
again for at least 2 seconds.
(Monitor display)
0
13
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
(Audio display)
(Monitor display)
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
Autogood products internet store http://130.com.ua
59-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 60 Wednesday, December 7, 2005 12:00 PM
Indication for Changer
Indication for iPod Mode
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the adapter.
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod connection cable.
• A disc is left inside the Changer.
- Press the eject button to activate the eject function. When the
Changer finishes the eject function, insert an empty magazine
into the Changer to receive the disc left inside the Changer.
a
.u
m
o
c
.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
0
13
• No magazine is loaded into the Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
60-EN
Autogood products internet store http://130.com.ua
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 61 Wednesday, December 7, 2005 12:00 PM
GENERAL
Specifications
Power Requirement
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
Maximum Power Output
Maximum Pre-Output Voltage
Bass
Treble
Weight
87.5 – 108.0 MHz
0.7 µV
80 dB
65 dB
35 dB
2.0 dB
CHASSIS SIZE
Width
Height
Depth
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
14.4 V DC
(11 – 16 V allowable)
50 W × 4
4 V/10k ohms
+20/-14 dB at 60 Hz
±14 dB at 10 kHz
1.6 kg (3 lbs. 8 oz)
531 – 1,602 kHz
25.1 µV/28 dB
178 mm (7")
50 mm (2")
166 mm (6-9/16")
NOSEPIECE SIZE
LW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
Width
Height
Depth
153 – 281 kHz
31.6 µV/30 dB
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
PICKUP
Wave length
Laser power
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
105 dB
• Due to continuous product improvement, specifications and design
are subject to change without notice.
a
.u
CAUTION
m
o
c
.
0
13
DVD: 665 nm
CD:
785 nm
CLASS II
170 mm (6-3/4")
46 mm (1-13/16")
18 mm (11/16")
CLASS 1
LASER PRODUCT
(Bottom side of player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
CR2025 battery
51 mm (2")
119 mm (4-11/16")
13 mm (1/2")
50 g (1.75 oz) (battery
excluded)
(Bottom side of player)
Autogood products internet store http://130.com.ua
61-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 62 Wednesday, December 7, 2005 12:00 PM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 4 and 5 of this manual thoroughly
for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
a
.u
m
o
c
.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
0
13
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury.
If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
62-EN
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your DVA-9861Ri. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the DVA-9861Ri to the fuse box, make
sure the fuse for the intended circuit of the DVA-9861Ri has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The DVA-9861Ri uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
Autogood products internet store http://130.com.ua
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 63 Wednesday, December 7, 2005 12:00 PM
2
Installation
Metal Mounting Strap
Screw
Caution
Do not block the unit’s fan or heat sink, thus preventing air
circulation. If blocked, heat will accumulate inside the unit and
may cause a fire.
∗
Air ventilation hole
Bolt Stud
Hex Nut (M5)
(Rear side)
this unit
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the DVA-9861Ri and
put the Rubber Cap on the hex bolt. If your vehicle
does not have the Mounting Support, reinforce the
head unit with the metal mounting strap (not
supplied). Connect all the leads of the DVA-9861Ri
according to details described in the “Connections”
section.
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
Head unit .............................................................................1
Power cable.........................................................................1
FULL SPEED™ Connection Cable ......................................1
Mounting sleeve ..................................................................1
Carrying case ......................................................................1
Rubber Cap .........................................................................1
Hex Bolt ...............................................................................1
Screw (M5x8).......................................................................4
RCA extension cable (Video) (2m) ......................................1
Remote control ....................................................................1
Battery (CR2025).................................................................1
Owner’s Manual .............................................................1 set
1
3
m
o
c
.
• The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
Less than 35°
a
.u
• For the screw*, provide a proper screw to the chassis installing
location.
0
13
Slide the DVA-9861Ri into the dashboard. When the
unit is in place, make sure the locking pin is fully
seated in the down position. This can be done by
pressing firmly in on the unit while pushing the
locking pin down with a small screwdriver. This
ensures that the unit is properly locked and will not
accidentally come out from the dashboard. Install
the Detachable Front Panel.
Lock pin
Rubber Cap
(Included)
Bracket
Hex Bolt
(Included)
Dashboard
Mounting sleeve
(Included)
this unit
Slide mounting sleeve from main unit (see
“Removal” on page 64). Slide the mounting sleeve
into the dashboard and fix it with the metal shackles.
Autogood products internet store http://130.com.ua
63-EN
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 64 Wednesday, December 7, 2005 12:00 PM
Removal
1. Remove the detachable front panel.
2. Use a small screwdriver (or similar tool) to push the
locking pin to the “up” position (see above drawing).
As each pin is unlocked, gently pull out on the unit to
make sure it does not re-lock before unlocking the
second pin.
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Face Plate
Screws (M5×8)
(Included)
a
.u
this unit
m
o
c
.
Mounting Bracket
0
13
64-EN
Autogood products internet store http://130.com.ua
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 65 Wednesday, December 7, 2005 12:00 PM
Connections
To vehicle Display Interface
CD Changer
(Sold Separately)
To iPod
(White/Brown)
REMOTE IN
To remote output lead
(White/Pink)
M. CONT
To monitor control lead
To video input
terminal
Antenna
ISO Antenna
Plug
JASO Antenna Plug
(Pink/Black) AUDIO INTERRUPT IN
To vehicle phone
(Blue/White)
REMOTE TURN-ON
To amplifier or equalizer
(Orange)
(Red)
DIMMER
To the instrument cluster
illumination lead
To power antenna
a
.u
IGNITION
(Black) GND
(Blue) POWER ANT
m
o
c
.
(Yellow) BATTERY
0
13
(Green)
Ignition Key
Speakers
Battery
Rear Left
(Green/Black)
(White)
Front Left
(White/Black)
(Grey/Black)
Front Right
(Grey)
(Violet/Black)
Rear Right
(Violet)
Ai-NET
Speakers
Front Left
EQ/DIV NORM
Amplifier
Front Right
Rear Left
Amplifier
Rear Right
Amplifier
Autogood products internet store http://130.com.ua
Subwoofers
65-EN
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 66 Wednesday, December 7, 2005 12:00 PM
Vehicle Display Interface Connector
Left Rear (+) Speaker Output Lead (Green)
Outputs Vehicle Display Interface control signals. Connect
this to the optional Vehicle Display Interface box.
For details about connections, consult your nearest Alpine
dealer.
Left Rear (–) Speaker Output Lead (Green/Black)
Ai-NET Connector
Right Front (–) Speaker Output Lead (Grey/Black)
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with Ai-NET.
Right Front (+) Speaker Output Lead (Grey)
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Ai-NET Cable (Included with CD Changer)
Right Rear (+) Speaker Output Lead (Violet)
iPod Direct Connector
Control iPod signals.
Connect this to an iPod, using the FULL SPEED™
Connection Cable (included).
Digital Output Terminal (Optical)
FULL SPEED™ Connection Cable (included)
Steering Remote Control Interface Connector
Remote Control Input Lead (White/Brown)
To steering remote control interface box.
• Use a steering remote control extension cable if necessary.
Use when combining optical digital input compatible
products.
Connect the external Alpine product to the remote control
output lead.
Rear Output RCA Connectors
RED is right and WHITE is left.
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panelcompatible monitor.
Front Output RCA Connectors
Video Output Connector
Subwoofer Output RCA Connectors
This connector is used in combination with the video inputs
of another video product. (Touch panel compatible monitor,
etc.)
RED is right and WHITE is left.
Antenna Receptacle
ISO/JASO Antenna Adapter (sold separately)
RED is right and WHITE is left.
a
.u
System Switch
When connecting a processor using Ai-NET, place this
switch in the EQ/DIV position. When no device is
connected, leave the switch in the NORM position.
m
o
c
.
ISO/JASO Antenna Adaptor may be required, depending on
the vehicle.
• Be sure to turn the power off to the unit before changing the
switch position.
Audio Interrupt In Lead (Pink/Black)
Power Supply Connector
Connect this lead to the Audio Interface output of a cellular
phone which provides ground shorting when a call is
received.
0
13
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Dimmer Lead (Orange)
RCA Extension Cable (sold separately)
Fuse Holder (10A)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will enable the vehicle’s
dimmer control to dim the backlighting of the unit.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle's
power antenna. Do not use this lead to turn on an amplifier or a
signal processor, etc.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
ISO Power Supply Connector
ISO Connector (Speaker Output)
66-EN
Autogood products internet store http://130.com.ua
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
01GB00DVA9861Ri.book Page 67 Wednesday, December 7, 2005 12:00 PM
System Example
Connect the Ai-NET compatible digital audio processor (Fiber optic compatible) and touch panel compatible monitor/changer.
System switch
EQ/DIV
Touch panel
compatible monitor
(sold separately)
Video output Lead
Touch panel
compatible
monitor box
(sold separately)
Video input terminal
(Yellow)
RCA Extension cable (video) (included)
Remote control input Lead
Remote control output Lead
(White/Brown)
(White/Brown)
Monitor control Lead
(White/Pink)
Monitor control Lead
(White/Pink)
To Digital output terminal
a
.u
Fiber optic Cable
Fiber optic input terminal (for head unit)
Ai-NET Cable
Ai-NET compatible digital
audio processor
(sold separately)
(Fiber optic compatible)
Ai-NET Cable
Ai-NET output terminal
m
o
c
.
• When the fiber optic compatible product is connected, it is necessary to set
the mode of this unit. Refer to “Setting the Digital Output” (page 30) and set
to ON.
Fiber optic input
terminal
(for changer)
0
13
*
Fiber optic
cable
Please observe the following when using Fiber Optic Cable.
• Be careful not to bend the fiber optic cable at a sharp angle.
• Do not coil the fiber optic cable smaller than a 30 mm radius.
• Do not place anything on top of the fiber optic cable.
Ai-NET compatible CD
changer (sold separately)
* Only connect fiber
optic compatible
CD changer
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
Autogood products internet store http://130.com.ua
67-EN
01GB06DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
To customers/Hinweis an Kunden/
A l’attention de l’utilisateur/Información para
los clientes/Informazioni per i clienti/Till kunder
R
Note the following errors and supplementary information regarding the Owner’s Manual.
Beachten Sie die folgenden Fehler und Zusatzinformationen, die sich auf die Bedienungsanleitung beziehen.
Prenez note des erreurs suivantes et des informations supplémentaires relatives au Mode d’emploi.
English
<Supplementary information>
DualDisc
This unit is not compatible with DualDisc. Using a DualDisc may cause unit malfunction, and may cause disc damage when the
disc is inserted/ejected.
<Correction>
• Page 35, “Setting the DVD Audio Playback Mode”
Incorrect
Correct
Setting item: DVD-A PLAY MODE
Setting contents: VIDEO/VCAP/VOFF
Setting item: DVD-A PLAY MODE
Setting contents: VIDEO/VCAP/VOFF
VIDEO: Only DVD Video is played back if the disc contains
DVD Video and Audio.
VCAP: DVD Audio is played back with Video.
VOFF: DVD Audio is played back without Video.
The initial setting at the factory is VCAP.
VIDEO: When both DVD-Video data and DVD-Audio data are
recorded on one disc, the DVD-Video data has priority.
VCAP: The sound and the images are output, as well as the DVD-Video.
VOFF: Only the sound data is output; images are not.
The initial setting at the factory is VIDEO.
a
u
.
Deutsch
m
o
.c
<Zusatzinformationen>
DualDisc
Dieses Gerät ist nicht mit DualDisc kompatibel. Die Verwendung einer DualDisc kann zu einer Fehlfunktion des Geräts führen
und die Disc beschädigen, wenn sie eingelegt/ausgeworfen wird.
<Korrektur>
• Seite 35, „Einstellen des DVD-Audio-Wiedergabemodus“
Falsch
0
3
1
Einstelloption: DVD-A PLAY MODE
Einstellungen: VIDEO/VCAP/VOFF
VIDEO: Bei Discs mit DVD-Video- und -Audiodaten werden nur
die DVD-Videodaten wiedergegeben.
VCAP: DVD-Audiodaten werden mit Videoinformation
wiedergegeben.
VOFF: DVD-Audiodaten werden ohne Videoinformation
wiedergegeben.
Die werkseitige Einstellung ist VCAP.
Richtig
Einstelloption: DVD-A PLAY MODE
Einstellungen: VIDEO/VCAP/VOFF
VIDEO: Wenn auf einer Disc sowohl DVD-Video- als auch
DVD-Audio-Daten aufgezeichnet sind, haben die
DVD-Video-Daten Vorrang.
VCAP: Der Ton und die Bilder werden ausgegeben sowie
auch das DVD-Video-Material.
VOFF: Es werden lediglich Audiodaten ausgegeben, Bilder
jedoch nicht.
Die werkseitige Einstellung ist VIDEO.
Français
<Informations supplémentaires>
DualDisc
Cet appareil n’est pas compatible avec les DualDisc. Si vous utilisez un DualDisc, vous risquer d’endommager l’appareil ainsi
que le disque lors de l’insertion ou de l’éjection.
<Correction>
• Page 35, « Réglage du mode de lecture du DVD audio »
Incorrect
Désignation du réglage: DVD-A PLAY MODE
Désignations du réglage: VIDEO/VCAP/VOFF
VIDEO :Seul les données vidéo sont lues si le disque contient des
données vidéo et audio.
VCAP : Les données audio ainsi que les données vidéo sont lues.
VOFF : Seules les données audio sont lues.
Le réglage par défaut est VCAP.
Correct
Désignation du réglage: DVD-A PLAY MODE
Désignations du réglage: VIDEO/VCAP/VOFF
VIDEO :Lorsque vous enregistrez sur le DVD des données
vidéo et audio, les données vidéo ont la priorité.
VCAP : Le son et les images sont reproduits, ainsi que le DVD vidéo.
VOFF : Seul le son est reproduit, les images ne le sont pas.
Le réglage par défaut est VIDEO.
DVA-9861Ri
68-05946Z61-A (Y)
Autogood products internet store http://130.com.ua
DVA-9861Ri 68-05946Z61-A
お客様へ/To customers/Hinweis an Kunden/
A l’attention de l’utilisateur/Información para los clientes/
Informazioni per i clienti/Till kunder/
/
R
取扱説明書を補足致します。/Please note following additional information of the Owner’s Manual./Bitte beachten Sie folgende
zusätzliche Informationen zur Bedienungsanleitung./ Veuillez noter les ajouts suivants au mode d’emploi./Tenga en cuenta la
información adicional contenida en el Manual de operación./ Tenere presente le seguenti informazioni supplementari d’ istruzioni
per l’uso./ Se följande tillägg till användarhandledning./
/
a
.u
和文
• アルパインシアターアンプに接続した場合は、アンプ/プロセッサーを含むサラウンドモードのレベル設定ができます。その際、スピーカーレベル
(OUTPUT LEVEL) 設定の最大値および最小値が、本機ディスプレイでは正しく表示されません。最大値「+10」は「+0」、最小値「-10」は「-0」
と表示されます。これは多くのセットアップ機能が、モニターディスプレイに表示するよう設計されているためであり、故障ではありません。サラウン
ドモードのレベル設定などについては、モニターディスプレイを見て設定することをお薦めします。
m
o
c
.
English
• When connected to an Alpine Theater Amp, it is possible to make individual level adjustments of the various surround modes included with the amplifier/
processor. Since most of the setup function displays were designed with a video display in mind, this small unit display does not show the complete data
display at both the Maximum and Minimum settings for the speaker levels (OUTPUT LEVEL). For example, the actual display at either extreme should
read +10 or -10 for each mode. Instead, the display will show +0 or -0, respectively.
Deutsch
1
0
3
• Wenn das Gerät an einen Alpine Theater Amp angeschlossen ist, können die Pegel der verschiedenen Surround-Modi, die beim Verstärker/Prozessor
verfügbar sind, einzeln angepasst werden. Da die meisten Anzeigen der Setup-Funktion für eine Videoanzeige entwickelt wurden, zeigt diese kleine
Geräteanzeige nicht die vollständige Datenanzeige der Maximum- und Minimum-Einstellungen für die Lautsprecherpegel (OUTPUT LEVEL) an. Zum
Beispiel würde die tatsächliche Anzeige der Extremwerte für jeden Modus +10 oder -10 lauten. Stattdessen zeigt die Anzeige +0 bzw. -0 an.
Français
• Si vous raccordez un Home Cinéma Alpine, vous pouvez effectuer le réglage individuel des niveaux des différents modes surround de l’amplificateur/
processeur. La plupart des écrans de fonction de configuration ayant été conçus sur la base d’un écran vidéo, l’écran de cette petite unité n’affiche pas
toutes les données des réglages Maximum et Minimum du niveau des enceintes (OUTPUT LEVEL). Par exemple, l’écran actuel des deux réglages
extrêmes devrait afficher +10 ou -10 pour chaque mode. Cependant, l’écran affiche respectivement +0 et -0.
DVA-9861/DVA-9861Ri/DVA-9861Ji/DVA-9861E
68-05946Z70-A (Y)
Autogood products internet store http://130.com.ua
DVA-9861 C/N 68-05946Z70-A (Y)
Español
• Al conectarse a un amplificador de home cinema de Alpine, es posible realizar ajustes individuales de los niveles de los distintos modos de sonido
envolvente incluidos con el amplificador/procesador. Dado que la mayoría de las pantallas de funciones de configuración se han diseñado teniendo en
mente una pantalla de vídeo, la pantalla de esta pequeña unidad no muestra todos los datos en los ajustes máximo y mínimo del nivel de los altavoces
(OUTPUT LEVEL). Por ejemplo, la pantalla real en cualquiera de los dos ajustes extremos debería mostrar +10 o -10 para cada modo. Sin embargo, la
pantalla mostrará +0 o -0, respectivamente.
Italiano
a
.u
• Se è collegato un Theater Amp Alpine, è possible eseguire delle regolazioni di livello individuali per le varie modalità surround comprese con
l’amplificatore/processore. Poiché gran parte delle schermate delle funzioni di configurazione sono state progettate per un dispositivo dotato di display
video, il display di questa piccola unità non mostra i dati completi relativi alle impostazioni Massimo e Minimo per i livelli degli altoparlanti (OUTPUT
LEVEL). Ad esempio, a ciascun estremo la visualizzazione reale dovrebbe essere +10 o -10 per ogni modalità. Il display mostra invece +0 e -0
rispettivamente.
m
o
c
.
Svenska
• När enheten är ansluten till en Alpine Theater-förstärkare, kan man göra individuella nivåjusteringar för de olika surroundlägena som förstärkaren/
processorn har. Eftersom de flesta inställningsfunktionerna har konstruerats för en bildskärm, kanske inte denna lilla display kan visa hela
inställningsfunktionen vid både max- och min-inställningarna för högtalarnivåerna (OUTPUT LEVEL). Exempelvis visar den faktiska inställningsfunktionen
+10 eller -10 i ytterlägena för varje läge. Istället visar displayen +0 respektive -0.
1
0
3
Autogood products internet store http://130.com.ua
DVA-9861 C/N 68-05946Z70-A (Y)
Tenga en cuenta los siguientes errores e información complementaria acerca del Manual de usuario.
Prestare gli errori e le informazioni supplementari riguardanti il Manuale utente e riportati di seguito.
Observera följande fel och tilläggsinformation beträffande användarhandboken.
Español
<Información complementaria>
DualDisc
Esta unidad es compatible con la tecnología DualDisc. La utilización de la tecnología DualDisc puede causar un mal
funcionamiento y provocar daños en el disco al insertarlo o extraerlo.
<Corrección>
• Página 35, “Configuración del modo de reproducción de discos DVD de audio”
Incorrecto
Correcto
Elemento de configuración: DVD-A PLAY MODE
Opciones de configuración: VIDEO/VCAP/VOFF
VIDEO: sólo se reproduce el DVD de vídeo si el disco contiene
tanto vídeo como audio.
VCAP: se reproduce el DVD de audio junto con el vídeo.
VOFF: se reproduce el DVD de audio sin el vídeo.
El ajuste inicial de fábrica es VCAP.
Elemento de configuración: DVD-A PLAY MODE
Opciones de configuración: VIDEO/VCAP/VOFF
VIDEO: si el disco contiene datos grabados de DVD de vídeo y
de DVD de audio, los datos de DVD de vídeo tiene
prioridad.
VCAP: se reproduce el sonido y las imágenes, tal como
ocurre en los discos DVD de vídeo.
VOFF: sólo se reproducen los datos de sonido, no las imágenes.
El ajuste inicial de fábrica es VIDEO.
a
u
.
Italiano
<Informazioni supplementari>
DualDisc
Questo apparecchio non è compatibile con DualDisc. L’utilizzo di DualDisc può causare problemi di funzionamento e
danneggiare il disco durante l’inserimento/espulsione.
<Correzione>
• Pagina 35, “Impostazione del modo di riproduzione di DVD audio”
Errato
0
3
1
m
o
.c
Voce selezionata: DVD-A PLAY MODE
Contenuto dell’impostazione: VIDEO/VCAP/VOFF
VIDEO: Il DVD video viene riprodotto solo se il disco contiene
audio e video DVD.
VCAP: L’audio DVD viene riprodotto insieme al video.
VOFF: L’audio DVD viene riprodotto senza il video.
L’impostazione predefinita è VCAP.
Corratto
Voce selezionata: DVD-A PLAY MODE
Contenuto dell’impostazione: VIDEO/VCAP/VOFF
VIDEO: Quando dati DVD video e DVD audio vengono
entrambi registrati su disco, i dati del DVD video
hanno priorità.
VCAP: Vengono riprodotti sia immagini e suoni che i DVD
video.
VOFF: Vengono riprodotti solo i suoni; non le immagini.
L’impostazione predefinita è VIDEO.
Svenska
<Tilläggsinformation>
DualDisc
Den här enheten är inte kompatibel med DualDisc. Om man använder en DualDisc kan detta leda till att enheten inte fungerar
som den ska när skivan sätt i eller matas ut..
<Rättelse>
• Sidan 35, ”Ställa in uppspelningsläget för DVD-ljud”
Fel
Rätt
Inställning: DVD-A PLAY MODE
Inställningsalternativ: VIDEO/VCAP/VOFF
VIDEO: Endast DVD Video spelas upp om skivan innehåller
DVD Video och Audio.
VCAP: DVD Audio spelas upp med Video.
VOFF: DVD Audio spelas upp utan Video.
Den ursprungliga fabriksinställningen är VCAP.
Inställning: DVD-A PLAY MODE
Inställningsalternativ: VIDEO/VCAP/VOFF
VIDEO: Om både DVD-videodata och DVD-ljuddata spelas
in på en skiva har DVD-videodata prioritet.
VCAP: Ljudet och bilderna avges samt även DVD-video.
VOFF: Endast ljuddata avges, inte bilder.
Den ursprungliga fabriksinställningen är VIDEO.
Autogood products internet store http://130.com.ua
DVA-9861Ri 68-05946Z61-A
01GB00DVA9861Ri.book Page 2 Wednesday, December 7, 2005 12:00 PM
CHM-S630
CHA-S634
CHA-1214
•
•
•
•
•
•
•
•
•
•
•
•
CD changer for DVA-9861Ri
CD-Wechsler für DVA-9861Ri
Changeur CD pour DVA-9861Ri
Cambiador de CD para DVA-9861Ri
Caricatore CD per DVA-9861Ri
CD-växlare för DVA-9861Ri
CD changer for DVA-9861Ri
CD-Wechsler für DVA-9861Ri
Changeur CD pour DVA-9861Ri
Cambiador de CD para DVA-9861Ri
Caricatore CD per DVA-9861Ri
CD-växlare för DVA-9861Ri
Alpine CD Changers Give You More!
a
.u
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW
PLAY BACK.
m
o
c
.
Von Alpine CD-Wechslern haben Sie mehr!
Mehr Musikauswahl, mehr Vielseitigkeit, mehr Komfort.
Der CHA-S634 ist ein Hochleistungs-Wechsler für 6 CDs mit dem neuen M-DAC, mit CD-R/RW- und MP3-Wiedergabefunktion und mit
CD-TEXT. Der CHA-1214 ist ein Ai-NET-Modell für 12 CDs. Der M-Bus-kompatible CHM-S630 ist ein superkompakter Wechsler für 6
CDs mit CD-R/RW-Wiedergabefunktion.
0
13
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques
super compact doté de la fonction CD-R/RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD
TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño
reducido con un CD-R/RW PLAY BACK.
I caricatori CD Alpine danno di più!
Più scelta, più versatilità, più comodità.
Il modello CHA-S634 è un caricatore a 6 dischi ad elevate prestazioni dotato di un nuovo M DAC, CD-R/RW PLAY BACK, MP3 PLAY
BACK e CD TEXT. Il modello CHA-1214 Ai-NET è in grado di contenere 12 dischi, il modello CHM-S630 M-Bus è un caricatore a 6
dischi ultra compatto dotato di un CD-R/RW PLAY BACK.
Alpines CD-växlare ger mer!
Fler musikval, mer variation, större bekvämlighet.
CHA-S634 är en växlare för 6 skivor med mycket höga prestanda och en ny M D/A-omvandlare samt uppspelning av CD-R/RW, MP3 och
CD TEXT. CHA-1214 Ai-NET rymmer 12 skivor. CHM-S630 M-Bus är en mycket kompakt växlare med kapaciteten 6 skivor med
uppspelning av CD-R/RW PLAY BACK.
Autogood products internet store http://130.com.ua
01GB02DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
PS-Card-Euro.fm Page 4 Thursday, August 25, 2005 7:21 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS-Card-Euro.fm
PS Card Euro - 4
PS-Card-Euro.fm Page 5 Thursday, August 25, 2005 7:21 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS-Card-Euro.fm
PS Card Euro - 5
PS-Card-Euro.fm Page 6 Thursday, August 25, 2005 7:21 PM
a
.u
m
o
c
.
0
13
Autogood products internet store http://130.com.ua
PS-Card-Euro.fm
PS Card Euro - 6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement