Optimus 5100 User's Guide - English

Optimus 5100 User's Guide - English
Optimus™ 5100
with Windows® CE 5.0 Core
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to
determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved.
No part of this document may be photocopied, reproduced, or translated into another language without
the prior written consent of HII.
Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Other Trademarks
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell
International Inc.
©2011 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Table of Contents
Chapter 1 - Table of Contents
Chapter 1 - Agency Approvals
Label Locations ....................................................................................................................1-1
Safety & RF Approvals by Country: .....................................................................................1-1
Chapter 2 - Getting Started
Out of the Box ......................................................................................................................2-1
LED Indicators................................................................................................................2-3
Desktop ................................................................................................................................2-4
Command Bar Icons ............................................................................................................2-4
Chapter 3 - Terminal Hardware Overview
Standard Terminal Configurations .......................................................................................3-1
Optional Terminal Configurations ........................................................................................3-1
Display Backlight..................................................................................................................3-3
Screen Backlight - Battery/External Power ....................................................................3-3
Keypad Backlight .................................................................................................................3-3
Using Screen Protectors ......................................................................................................3-3
Back Panel Features............................................................................................................3-6
Installing Memory Cards ................................................................................................3-7
Top Panel Features .............................................................................................................3-7
Bottom Panel Features ........................................................................................................3-8
Optimus Peripherals/Accessories for the 5100 ....................................................................3-8
Optimus USB Communication Cable ...................................................................................3-9
Soft Reset (Warm Boot) ...............................................................................................3-12
Hard Reset (Cold Boot)................................................................................................3-12
Suspend Mode ...................................................................................................................3-13
Changing the Memory Allocation .......................................................................................3-13
Care and Cleaning of the Optimus Terminal......................................................................3-13
Chapter 4 - Using the Keypad
Overview ..............................................................................................................................4-1
Navigation Keys ...................................................................................................................4-1
Basic Keys ...........................................................................................................................4-1
Alpha/Numeric/Mouse Pointer Modes .................................................................................4-2
Alpha Indicators on the Number Keys............................................................................4-2
Mouse Pointer Mode ......................................................................................................4-2
Function Key Combinations .................................................................................................4-3
Program Buttons ..................................................................................................................4-4
Chapter 5 - Using the Laser Engine
Overview ..............................................................................................................................5-1
iii
Available Laser Engines ...................................................................................................... 5-1
Depth of Field ................................................................................................................ 5-1
Supported Bar Code Symbologies ............................................................................... 5-1
Chapter 6 - Using the Image Engine
Overview.............................................................................................................................. 6-1
Available Image Engines ..................................................................................................... 6-1
Depth of Field ................................................................................................................ 6-1
Decoding ............................................................................................................................. 6-3
Chapter 7 - Communication
Communication Options ...................................................................................................... 7-1
Installing Additional Software .............................................................................................. 7-1
Connecting and Synchronizing the Terminal and Workstation............................................ 7-2
Wireless Radios................................................................................................................... 7-5
Connecting the Terminal to a Wireless Network............................................................ 7-6
WLAN (802.11b/g Radio) .................................................................................................... 7-6
Chapter 8 - Bluetooth Handler
Enabling the Bluetooth Radio .............................................................................................. 8-1
Connecting to Other Devices............................................................................................... 8-1
Pairing Bluetooth Devices ................................................................................................... 8-1
Setting Up a Bluetooth Printer ............................................................................................. 8-1
Chapter 9 - Optimus HomeBase Device
Overview.............................................................................................................................. 9-1
Front Panel ......................................................................................................................... 9-1
Charging the Main Battery................................................................................................... 9-4
Checking Battery Power ...................................................................................................... 9-5
Technical Specifications ...................................................................................................... 9-6
Chapter 10 - Optimus QuadCharger Device
Overview............................................................................................................................ 10-1
QuadCharger Device ........................................................................................................ 10-1
Troubleshooting................................................................................................................. 10-3
Technical Specifications .................................................................................................... 10-4
Chapter 11 - Customer Support
Product Service and Repair............................................................................................... 11-1
Online Product Service and Repair Assistance ........................................................... 11-1
Technical Assistance......................................................................................................... 11-2
Online Technical Assistance........................................................................................ 11-2
Limited Warranty ............................................................................................................... 11-3
Limited Warranty Duration................................................................................................. 11-3
How to Extend Your Warranty ..................................................................................... 11-4
iv
1
Agency Approvals
Label Locations
Optimus 5100 mobile computers meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Read these guidelines
carefully before using your mobile computer.
Laser Light Label
Laser Light Label
Safety & RF Approvals by Country:
Country
Safety
RF (Radio)
China
CCC
SRRC
India
WPC
Laser Safety Label
If the following label is attached to your product, it indicates the product contains
a laser engine or laser aimer.
1-1
Laser Eye Safety Statement: This device has been tested in accordance with and complies with
IEC60825-1: 2007 (2nd Edition) and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2
LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
This class 2 laser product is in accordance with the requirements of IEC60825-1 Ed. 1.2 Clause 6.2(a).
Caution - use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
CB Scheme
Certified to CB Scheme IEC 60950-1:2005 (2nd Edition).
For European Community Users
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It may contain
hazardous substances that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure
on the natural resources, we encourage you to use the appropriate take-back systems for product
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a
sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along
with municipal waste and invites you to use the appropriate separate take-back systems for product
disposal.
If you need more information on the collection, reuse, and recycling systems, contact your local or
regional waste administration.
You may also contact your supplier for more information on the environmental performances of this
product.
1-2
2
Getting Started
Out of the Box
Verify that your carton contains the following items:
• Optimus 5100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• Quick Start Guide
• Belt Clip
• Lanyard
Note: Be sure to keep the original packaging in case you need to return the Optimus terminal for service; see
Product Service and Repair on page 11-1.
Step 1. Install the Main Battery
The 5100 is shipped with the battery packaged separate from the unit. Follow the steps below to install
the main battery.
1. Remove the battery door by turning the screw clockwise to unlock the battery door.
2.
Remove the battery door.
2-1
3.
Insert the battery into the battery well with the labels facing upward.
4.
Replace the door with a hinging motion and turn the screw counter-clockwise to lock the door.
Note: The battery door must be installed prior to booting the unit.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.
!
2-2
Step 2. Charge the Batteries
5100s ship with both the main battery pack and
internal backup battery significantly discharged of
power. Charge the main battery pack with the
Optimus charging cable for a minimum of 4 or 6
hours depending on your battery before initial
use.
1. Attach the appropriate plug adapter to the
plug of the power cable.
2.
Insert the plug into the appropriate power
source.
3.
Plug the Optimus power cable into the DC
Power Jack (see page 3-8) on the bottom end
of the unit.
2
1
3
Note: If you remove the battery pack or it completely
discharges, there is a 30 minute window in which
to insert a charged battery pack before the
backup battery completely discharges. If your
backup battery completely discharges, the
contents of the RAM memory will be lost. If your
backup battery is less than fully charged, there is
a proportionally smaller window of time available.
LED Indicators
Red LED On
Charging
Green LED On
Battery is full or fully charged
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any nonHoneywell peripherals, cables, or power adapters may cause damage not covered by the warranty.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating
wet components may cause damage not covered by the warranty.
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or
interrupt the boot process.
When the boot process is complete, the Desktop appears, and the terminal is ready for use.
2-3
Desktop
Note: You can access the Desktop any time by selecting the Change Views icon in the command bar and selecting
Desktop on the popup menu.
Select to
change views
Command Bar Icons
The command bar, located at the bottom of application screens, provides access to many system
functions and programs.
Icon
Meaning
Opens the Start menu.
Changes views between open applications or returns to the Desktop.
Accesses the Bluetooth radio. Select this icon to open the Bluetooth Handler (see page 8-1).
Shows signal strength of WiFi radio. (A red X indicates the terminal is not currently associated to
an access point.)
Indicates that the USB communication cable is connected. Select to display USB status window.
Indicates the status of battery power. Select to open the Power control panel setting.
When this icon shows a red power plug, it indicates the device is using external power.
Displays the current time. Select to change the time and date.
2-4
Icon
Meaning
Indicates whether the keypad is standard alpha (upper and lower case), all caps alpha, in numeric
mode, or in mouse pointer mode. Press the ALPHA button on the keypad to switch modes.
The up arrow allows you to turn the Wireless LAN and Bluetooth connection on or off. It also
allows you to toggle between the Keypad and Transcriber. When Keypad is selected, a keypad is
displayed so you can select text and number keys. Transcriber recognizes handwriting and
symbols entered using the stylus.
Using the Stylus (Optional)
If your terminal is equipped with a touch screen, a stylus is included. Use this stylus (or your finger) to
select or enter information on the touch screen. The stylus functions as a mouse; generally, a tap is the
same as a click.
Tap
Tap the touch screen once or double tap to open menu items and select options.
Drag
Hold the stylus on the screen and drag across the screen to select text and images.
Tap & hold
Tap and hold the stylus on an item and a pop-up menu appears. On the pop-up menu, tap
the action of the task you want to perform.
!
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input
panel and may cause damage not covered by the warranty.
For more information about the touch screen, see Screen Display on page 3-2.
2-5
Selecting Programs
Select Start -> Programs. To open a program, select the icon on the menu.
Pop-Up Menus
You can quickly choose an action for an item using the pop-up menus.
1. Select and hold the stylus on the item name. The pop-up menu appears.
2.
Select the action you want to perform.
The contents of pop-up menus change according to the program you are using.
Using Windows Explorer
Use Windows Explorer to navigate through the files on your system. On the desktop, select the My
Device icon and Windows Explorer opens to the root level.
2-6
3
Terminal Hardware Overview
5100 terminals include a number of standard terminal configurations as well as charging and
communication peripherals and accessories to maximize the efficiency of your application.
Standard Terminal Configurations
Optimus 5100
•
•
•
•
•
Microsoft Windows CE 5.0 Core
Marvell PXA 300 624MHz
64MB RAM X 128MB (non-volatile) Memory
28-key numeric keypad
2.4” 1/4 QVGA transmissive active matrix color
display
• Standard Capacity: Li-ion battery: 3.7V /
2200mAh / 8.1 Wh
• 4813 laser engine
• Optimus power cable (included with each 5100)
Optional Terminal Configurations
Optimus 5100 Optional Configurations
• 2.4” 1/4 QVGA transmissive active matrix color
display with touch screen
• Extended Capacity: Li-ion battery: 3.7V /
3300mAh / 12.2 Wh (with extended battery
door)
• 5300 SR image engine
• (WPAN/WLAN) - Bluetooth and 802.11b/g
radio
3-1
Front Panel Features
LED
Display (screen
protector
installed at the
factory)
Scan key
Navigation
keys
Keypad
(28-key
numeric)
Software
Reset key
Power key
Scan/Decode LED
The LED is user-programmable.
Red
Scanned bar code is not decoded
Main battery is charging
Green
Scanned bar code is successfully decoded
Main battery charging has completed
Blue or Red
Soft or hard reset
Keypad
A 28-key numeric keypad is included on the unit.
Screen Display
The display is a LCD (Liquid Crystal Display). The 2.4” (1/4) QVGA (Quarter Video Graphic
Array) is transmissive active matrix color and backlit. The resolution is 240 x 320; see Display
Backlight on page 3-3.
Touch Screen Display (optional)
The display is a LCD (Liquid Crystal Display) with a 4-wire analog resistive touch screen. The
2.4” (1/4) QVGA (Quarter Video Graphic Array) is transmissive active matrix color and backlit.
The resolution is 240 x 320; see Display Backlight on page 3-3.
3-2
!
5100s ship with a screen protector already installed over the touch screen to help prevent
damage to the touch screen. Do NOT remove this screen protector before initial use.
Honeywell recommends using screen protectors, especially for applications that require
high volume interfacing with the touch screen. For more information, see Using Screen
Protectors on page 3-3. You can purchase additional screen protectors by contacting
your Honeywell sales representative.
For touch screen input, use the stylus included with the terminal or your finger. The method
you choose depends on which one is most appropriate for your application. While there is a
great deal of variation in different applications, you generally achieve greater accuracy with the
stylus for buttons or icons that are close together.
!
Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage
the input panel and may cause damage not covered by the warranty.
Display Backlight
The intensity of the backlight of the screen display may be changed, and the backlight may be
programmed to turn off after the terminal has been idle for a specified period of time.
To adjust the intensity of the backlight while on battery power, select Start -> Settings -> Control Panel
-> Backlight.
Screen Backlight - Battery/External Power
Move the slider to adjust the screen backlight while on battery power.
You may turn the screen backlight off if the device is not used for a designated
period of time by checking the option and designating the desired time period.
You may also turn on the screen backlight when a button is pressed by
selecting the appropriate checkbox.
Note: Using the backlight option while on battery power substantially reduces battery
life.
You may make the same changes when on external power by selecting the
External tab.
Keypad Backlight
The intensity of the backlight of the keys on the keypad may be changed and
the backlight may be programmed to remain on for a specified period of time
once a key is pressed.
To adjust the brightness of the keys, select the Keypad tab. Move the slider
to adjust the backlight while on battery power.
To turn on the keypad backlight, check the checkbox and change the duration
of the backlight.
Using Screen Protectors
Honeywell defines proper use of the terminal touch panel as using a screen
protector and proper stylus. Screen protectors maintain the ongoing integrity
(i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that
3-3
require a high to medium level of interface with the touch panel, such as signature capture for proof of
delivery.
Honeywell advocates the use of screen protectors on all Dolphin devices. We recommend implementing
a screen protector replacement program to ensure that screen protectors are replaced periodically when
signs of damage/wear are noticeable. Replacement screen protectors can be purchased directly from
Honeywell. Please contact a Honeywell sales associate for details.
Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than
0.8 mm. Use of the Honeywell stylus included with the terminal is recommended at all times.
Honeywell warranty policy covers wear on the touch panel for the first twelve (12) months if a screen
protector is applied and an approved stylus is used for the 12 month duration covered by the warranty.
Removing the Screen Protector
5100s ship with a touch screen protector already installed. To replace the screen protector, you must
remove the one already installed.
1. Press the Power key to put the terminal in Suspend Mode.
2.
Using a strong, flat, plastic card wedge the edge of the card under the existing screen protector.
Catch the edge of the screen protector and pull it up and away from the touch panel.
Note: If you have one, you can also use the small plastic squeegees designed for touch panels.
3.
Wipe the screen with a clean, non-abrasive, lint-free cloth.
Note: Use ionized air, if available, to blow additional dirt or particles off the touch panel.
Installing Your Screen Protector
When installing a new screen protector, use a flat plastic card to apply the screen protector smoothly and
remove any air bubbles.
Note: If you have one, you can also use the small plastic squeegees designed for touch panels.
1.
Press the Power key to put the terminal in Suspend Mode.
2.
Clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure nothing is on
the touch panel.
3.
Release the top edge of the backing paper on the screen protector.
4.
Align the exposed edge of the screen protector along the top edge of the touch panel.
Make sure that it lies flush with edges of the touch panel.
Note: To reposition the screen protector, lift up gently and reapply.
5.
Use the card on top of the screen protector to smooth it out as you pull on the backing paper.
6.
Pull smoothly and evenly from top to bottom until the screen protector is applied. Press gently but
firmly. Use the card as necessary to smooth out any air pockets or bumps after application.
7.
Press the Power key to wake the terminal and check the touch panel with the stylus.
8.
Verify that the screen accepts input from the stylus as usual. If not, re-apply the screen protector.
9.
Press the Power key to put the terminal back in Suspend Mode.
10. Clean the surface of the screen protector with a clean, non-abrasive, lint-free cloth.
3-4
11. Press the Power key to wake the terminal again.
12. For maximum performance, recalibrate the screen. Select Start -> Settings -> Control Panel ->
select Stylus -> Calibration tab.
13. Select Recalibrate and follow the instructions on the screen.
3-5
Back Panel Features
Engine Window
Stylus Loop
Lanyard Loop
Speaker
Finger
Saddle
Installed Battery
Lanyard
The 5100 comes with a lanyard. The lanyard is inserted in a loop on the device.
Finger Saddle
This is a slightly depressed and angled area of the back housing that is designed to cradle or
“saddle” your finger while holding the terminal. This unique ergonomic design makes the
terminal comfortable to hold and helps prevent you from accidentally dropping the terminal.
Installed Battery
For information about installing the battery, see Changing the Main Battery Pack on page 3-10.
For information about battery power, see Battery Power on page 3-9.
Speaker
The integrated speaker sounds audio signals as you scan bar code labels and enter data, but
emits no ambient noise on system activity (i.e., processor, memory access, radio traffic, etc.).
The speaker can also be used for playing sounds (e.g., WAV or MP3 files).
The speaker meets the following SPL levels at 40cm:
•
•
•
500Hz–67db
1KHz–72db
4KHz–72db
Stylus (Optional)
If your Optimus terminal is equipped with a touch screen, it ships with a stylus inserted in a
loop on the device. Store the stylus in the lanyard when you’re not using it; see Using the Stylus
(Optional) on page 2-5.
3-6
Installing Memory Cards
The 5100 supports Micro Secure Digital (SD) memory cards. You can purchase these SD cards by
contacting your Honeywell sales representative.
To install an SD card
1. Press the Power key to put the terminal in Suspend Mode; see Suspend Mode on page 3-13.
2.
Remove the battery.
3.
Insert the SD card with the label facing upward.
Note: To remove an installed SD card while the battery door cover is open, tap on the edge lightly to unlock the card;
the card will pop out just enough for you to grab its edge and pull it out.
4.
Replace the battery and battery door cover.
5.
Tap the Power key to resume operation.
6.
To verify that the operating system recognizes the new memory card, open Windows Explorer and
navigate to My Device\Storage Card.
Top Panel Features
Engine Window
(with engine)
Laser Engine Window
If you terminal is equipped with a 4813 laser engine, the angled engine reads and decodes 1D
bar code symbologies. For more information, see Using the Laser Engine on page 5-1.
Image Engine Window
If you terminal is equipped with a 5300SR image engine, the angled engine reads and decodes
most popular bar code symbologies and takes images like a digital camera. For more
information, see Using the Image Engine on page 6-1.
3-7
Bottom Panel Features
I/O Connector
DC Power Jack
DC Power Jack
The DC power jack receives external power from the Optimus power cable that is included with
the terminal. When connected to the Optimus power cable, the terminal is powered and the
main battery pack is charging.
I/O Connector
The I/O mechanical connector is designed to work exclusively with Optimus 5100 peripherals
and cables. This connector powers the terminal, charges the main battery, and facilitates
communication. This connector supports full speed USB 1.1 communication (up to 12 Mbps)
and RS-232 communications with a maximum speed of 115Kbps and seven baud rate
settings.
Through this connector, you can communicate with a host workstation via Microsoft
ActiveSync; see Connecting and Synchronizing the Terminal and Workstation on page 7-2.
The I/O connector supports the following signals:
DC IN
Clear To Send
Transmitted Data
Received Data
Request To Send
GND
USB Host +5V
RS-232 Shutdown
USB Host D+
USB Client D+
USB Host D-
USB Client D-
USB Host Detect
USB Client +5V
Note: Signals referenced are for a DTE device.
Optimus Peripherals/Accessories for the 5100
The following items are sold separately and enhance your 5100’s capabilities.
3-8
Optimus HomeBase™ Device
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base,
its main battery pack charges in four hours for the standard capacity 2200mAh pack and in six hours for
the extended capacity 3300mAh pack.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see Optimus HomeBase Device on page 9-1.
Optimus QuadCharger™ Device
The Optimus QuadCharger device, a four-slot charging station for Optimus Li-ion battery packs, can
charge each battery in four hours (2200 mAh) or six hours (3300 mAh).
For more information, see Optimus QuadCharger Device on page 10-1.
Optimus USB Communication Cable
The Optimus USB Communication Cable is used when communicating between the terminal and a PC/
laptop via the USB port.
Li-ion Battery Packs
The Li-ion battery pack provides the main power supply for the terminal. For more information, see Battery
Power on page 3-9.
For information on how to purchase these items, contact a Honeywell sales representative.
Battery Power
The intelligent battery technology inside the terminal features two types of battery power:
• The main battery pack
• The backup battery located inside the terminal (see Internal Backup Battery on page 3-11)
Both batteries work together to prevent data loss when the terminal is used over long periods of time.
Both batteries must be charged to full capacity before using the 5100 for the first time! Charge the
main battery pack with the Optimus charging cable for a minimum of 4 or 6 hours depending on your
battery before initial use.
Main Battery Pack
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
There are two Li-ion battery packs available for the 5100:
Standard Capacity:
Li-ion 3.7V/2200mAh/8.1Wh
Extended Capacity:
Li-ion 3.7V/3300mAh/12.2Wh
The Li-ion battery pack is the primary power source for the Optimus terminal as well as for the internal
backup battery.
3-9
Changing the Main Battery Pack
Before installing a battery pack, press the Power key to put the terminal in Suspend Mode (see page 313) so that operations are suspended before removing the main power source. Always put the terminal
in Suspend Mode prior to changing the battery. The 5100 is shipped with the battery separate from the
unit. You will need to remove the battery door, insert the battery, and replace the battery door. Refer to
the instructions included in Installing the Main Battery section (page 2-1).
Note: The battery door must be installed prior to booting the unit.
Charging Options
When the battery is installed in the terminal, you can use any of the peripherals listed below to charge the
battery.
• Optimus HomeBase Device (see page 9-1)
• Optimus Comm/Charge Cable; Connecting the USB Charging/Communication Cable (see page 7-2)
You may charge the device using the USB connection if you do not have a wall adapter. There are two
options that allow either 100mA or 500mA of current over the USB connection. Access the option by
selecting Start -> Settings -> Control Panel -> Power -> USB Charging.
To fully charge the Li-ion battery before installing it in the terminal, use the
• Optimus QuadCharger Device (see page 10-1) or insert the battery in the spare battery charging well
in the back of the Optimus HomeBase.
Charging Time
The standard capacity 2200mAh Li-ion battery pack requires four hours to charge to full capacity, while
the extended capacity 3300mAh pack requires six hours.
Managing Main Battery Power
Data and files saved on the Optimus terminal may be stored in RAM memory; therefore, maintain a
continuous power supply to the terminal to help prevent data loss. When you remove a battery pack, insert
another charged battery pack in the Optimus. If the main battery pack is low, insert the terminal into a
charging peripheral to power the terminal and begin recharging the battery.
Note: If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake
the Optimus 5100 terminal; you must replace the discharged battery with a fully charged battery, or apply AC
power to the terminal.
3 - 10
Checking Battery Power
Power icons appear in the command bar at the bottom of the window. Select the battery icon to open the
Power Properties. The Battery tab opens displaying the charge status of both the main and backup
batteries.
Note: You can also check battery power by selecting Start -> Settings -> Control Panel -> Power.
Storage Guidelines
To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4 to 122° F (-20 to 50°C) or in extremely high
humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Guidelines for Battery Pack Use and Disposal
The following are general guidelines for the safe use and disposal of batteries:
• We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a
personal hazard to the user.
• DO NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry
before connecting to an external power source.
• Replace defective batteries immediately; using a defective battery could damage the Optimus terminal.
• Never throw a used battery in the trash. It contains heavy metals and should be recycled according to
local guidelines.
• Don’t use a battery in any other manner outside its intended use in Optimus terminals and peripherals.
• Don’t short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury.
• Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery
power.
• If you observe that the Honeywell battery supplied is physically damaged in some way, send it to
Honeywell or an authorized service center for inspection. Refer to the Product Service and Repair
(page 11-1) section of this guide.
• Although your battery can be recharged many times, it will eventually be depleted. Replace it after the
battery is unable to hold an adequate charge.
• If you are not sure the battery or charger is working properly, send it to Honeywell or an authorized
service center for inspection.
Internal Backup Battery
Located inside the terminal, the backup battery is a 3.7V Lithium Polymer battery.
3 - 11
The internal backup battery prevents the terminal from being reset when you remove the main battery
pack. This backup battery retains RAM data and allows the real-time clock to remain operational for at
least 30 minutes. If the terminal is left without the main battery pack for more than 30 minutes, the internal
backup battery discharges and needs to be recharged to function according to specifications.
Note: Even if the internal backup battery fails, data and programs stored in Flash memory (\\Honeywell\AutoInstall)
or on an optional SD card are not lost. However, the terminal automatically cold boots when you install a fully
charged battery pack, and you need will to reset the Real Time Clock.
Charging
The internal backup battery charges off the main battery pack and requires 2 hours charge time to backup
RAM data for 30 minutes. You can begin using the Optimus terminal after charging the main battery for
four or six hours (depending upon your battery); however, the internal backup battery will continue to
charge off the main battery.
To ensure that the internal backup battery functions properly, maintain a consistent power supply for the
first eight hours of terminal operation. This power supply can be external power (using a charging
peripheral) or an installed, charged battery pack or a combination of both.
Resetting the Terminal
Soft Reset:
Press and release the Reset button. This resets RAM and reloads the OS.
Hard Reset:
Press and hold the Reset button and then press and release the Power button. This resets RAM,
reloads the OS, and resets the Real Time Clock.
Soft Reset (Warm Boot)
A soft reset re-boots the terminal without losing RAM data, terminates all running applications, reloads
the OS, and launches Autoinstall, which re-initializes the terminal.
You would perform a soft reset 1) when the terminal fails to respond, 2) after installing software
applications that require a reboot, or 3) after making changes to certain system settings.
1. Press the Reset button. The screen turns white and the decode and scan LED flashes blue for
approximately three seconds.
2.
When the reset is complete, the Desktop appears.
Hard Reset (Cold Boot)
A hard reset erases all of the data and applications stored in RAM memory, reloads the OS, resets the Real
Time Clock (RTC), launches Autoinstall, re-installs all programs stored in the \Honeywell\Autoinstall folder,
and re-initializes the terminal.
!
Hard resets automatically launch a soft reset as part of the boot process if there are CAB files present.
1. Press and hold the Reset button and then press and release the Power button. The screen turns
white and the decode and scan LED flashes red for approximately three seconds.
2.
The terminal re-initializes, which .
Note: Set the time and date after each hard reset to ensure that the system clock is accurate. Select the date on
the command bar to open the Clock setting and set the time and date.
3 - 12
Suspend Mode
Suspend Mode suspends terminal operation. The terminal appears to be “off” when in Suspend Mode.
The terminal is programmed to go into Suspend Mode automatically when inactive for a specified period
of time. You can set this time period in the Power setting.
To suspend and resume operation, press the Power button. You may also press the front Scan key to
wake a suspended device unless the battery door has been removed and replaced.
Note: You should always put the terminal in Suspend Mode when you change the battery pack; see Changing the
Main Battery Pack on page 3-10. When you replace the battery door, press the Power button to wake the
device. Pressing the front Scan key will not wake up the device when the battery door is replaced.
Troubleshooting Suspend/Resume
If the terminal does not wake when you press the Power button, the main battery might be too low to
resume operation. To check, remove the battery and install a fully charged battery or connect the terminal
to a Optimus charging peripheral.
Changing the Memory Allocation
You can adjust file storage vs. program memory in System Properties.
1. Select Start -> Settings -> Control Panel -> System -> Memory tab.
2.
Move the slider to adjust the memory allocation and select OK. The changes take effect
immediately.
Care and Cleaning of the Optimus Terminal
When needed, clean the engine window and the LCD display with a clean, non-abrasive, lint-free cloth.
The terminal can be cleaned with a damp cloth.
Optimus 5100 Technical Specifications
Operating System
Microsoft Windows CE 5.0 Core
Development
Environment
Optimus 5100 SDK
Application Software
Tools and Demos
3 - 13
Processor
Marvell PXA 300 624MHz
Memory
64MB RAM X 128MB Flash
Storage Expansion
User accessible Micro SD Card slot
Display
2.4 in. transmissive active matrix 65K color LCD with backlight, QVGA (240 x 320)
Engine
Laser: 4813 Laser Engine
Imager: 5300SR VGA Area Imager with High-Vis bracket aimer
Keypad
28-key shifted alpha numeric with backlit keys
Audio
Built-in speaker
I/O
Full speed USB 1.1 from cradle (or I/O cable); RS232 (115 Kbps) from cradle
Battery
Standard Li-ion battery 3.7V / 2200 mAh / 8.1 Wh
Extended Li-ion battery 3.7V / 3300 mAh / 12.2 Wh (includes extended battery door)
Expected Hours of
Operation
8+ hours (with scan and continuously transmitting)*
Charging
5V/2A input through bottom access or USB/Serial connector
Expected Charge Time
Standard Capacity: 2200mAh - four hours
Extended Capacity: 3300mAh - six hours
Charging Peripherals
AC wall adapter and Charger (PSC11R-050)/Communication Cable
HomeBase–single-bay terminal charge/communicate
Quad Charger–four-slot battery pack charger (DSA-0421S-03 1)
WPAN/WLAN (optional)
Bluetooth Class II (10 m) v2.0 Enhanced Data Rate (EDR) with on-board antenna. BQB
certified
Dual Mode 802.11 b/g (11 Mbps/54 Mbps) with internal antenna
WLAN Security
WEP, 802.1X, TKIP, MD5, EAP-TLS, EAP-TTLS, WPA-PSK, WPA v2.0, PEAP
Operating Temperature
14° to122°F (-10° to 50°C)
Charging Temperature
32° to 104°F (0° to 40°C)
Storage Temperature
-4° to 158°F (-20° to 70°C)
Humidity
95% humidity, non-condensing
Construction
High impact resistant PC housings
Magnesium alloy internal chassis with component shock mounts
Drop
4 ft. (1.2m) multiple drops to concrete, all axis, across operating temperature range
ESD
Direct: ± 8k Vdc
3 - 14
Environmental
Independently certified to meet IP54 standards for moisture and particle resistance
Dimensions
157 mm long x 57 mm wide x 41 mm deep (6.18” x 2.24” x 1.61”)
Weight
232 g (8.18 oz) including standard battery pack with 4813 Laser Engine
228 g (8.04 oz) including standard battery pack with 5300SR Imager Engine
Scanner / Decode
Capabilities
4813: 1D Laser Engine. Decodes all standard 1D codes.
5300SR: 2D Imager with Adaptus Technology and Laser Aimer. Decodes all standard 1D,
2D, Postal, and OCR codes.
Regulatory and
Compliance
Safety: CCC, CB
EMC: SRRC, WPC
* For standard battery pack. Battery life varies with application and use case.
3 - 15
3 - 16
4
Using the Keypad
Overview
Navigation
keys
Power key
Navigation Keys
Located in the center of the keypad for easy access with either hand, the navigation keys enable you to
move the cursor up and down lines and from character to character.
Basic Keys
Name
Function
ALPHA
Toggles the keypad between alpha (upper and lowercase), numeric, and mouse
pointer modes. Indicator changes accordingly on the command bar.
Backspace
Backspace moves the cursor back one space.
If you are typing text, a character is deleted each time you press the backspace
key.
Control
Modifies the next key pressed to type specific characters.
Escape
Cancels an action.
Enter
Performs the same function as the Enter key on a workstation.
Power
Suspends and resumes the terminal.
Scan
Activates the image engine to scan a bar code or take an image, if applicable.
Space
Moves the cursor one space forward.
If you are typing text, it moves the text one space forward as well.
4-1
Alpha/Numeric/Mouse Pointer Modes
The keypad defaults to numeric mode. Use the ALPHA key to toggle between numeric, alpha, and mouse
pointer modes. Pressing the ALPHA key once locks the keypad in numeric mode, alpha mode
(lowercase), alpha mode (uppercase), or mouse pointer mode.
The command bar on the screen displays an icon that indicates the alpha/numeric status of the keypad.
Icon
Keypad Status
The keypad is in lowercase alpha mode.
The keypad is in uppercase alpha mode.
The keypad is in numeric mode.
The keypad is in navigation mode.
Alpha Indicators on the Number Keys
Each number key displays the characters typed when you press that key in alpha mode.
Note that when typing in alpha mode, you must use the same multi-press method you would use when
typing letters on a phone keypad. Each key press types the next letter in the sequence as displayed by
the alpha indicator.
Mouse Pointer Mode
Key Combination
Function
1
Move pointer diagonally to the upper left.
2
Move pointer up.
3
Move pointer diagonally to the upper right.
4
Move pointer left.
5
To select object.
6
Move pointer right.
7
Move pointer diagonally to the lower left.
8
Move pointer down.
9
Move pointer diagonally to the lower right.
4-2
Function Key Combinations
The Function key (FUNC) modifies the next key pressed to perform specific functions.
Key Combination
Function
FUNC + 1
F5
FUNC + 2
F6
FUNC + 3
F7
FUNC + 4
Toggle the wireless radio on and off
FUNC + 5
Increase screen brightness
FUNC + 6
Increase volume
FUNC + 7
Tab
FUNC + 8
Decrease screen brightness
FUNC + 9
Decrease volume
FUNC + .
Start menu
FUNC + 0
Delete
FUNC + SP
Align the screen
(Press ESC to exit)
The keypad is color-coded in blue to indicate these key combinations.
Note: The color-coded indicators are located above each key.
4-3
CTRL Key Combinations
The Control key (CTRL) modifies the next key pressed to type specific characters.
Key Combination
Function
CTRL + 1
!
CTRL + 2
@
CTRL + 3
#
CTRL + 4
$
CTRL + 5
%
CTRL + 6
^
CTRL + 7
&
CTRL + 8
(
CTRL + 9
)
CTRL + .
- (minus)
CTRL + 0
*
CTRL + SP
+ (plus)
The keypad is color-coded in red to indicate these key combinations.
Note: The color-coded indicators are located above each key.
Program Buttons
Buttons can be programmed to execute different functions using the Program Button program in the
Control Panel. Press and hold the Function (FUNC) key and press the appropriate function key to
execute the indicated function.
4-4
5
Using the Laser Engine
Overview
If your terminal is equipped with a laser engine, you will be able to read all popular 1D bar codes.
Available Laser Engines
5100s are equipped with 4813 1D laser engines.
Depth of Field
4813 Standard Range
5.2 mil
Linear
7.5 mil
Linear
10.4 mil
EAN 13
10.4 mil
Code 128
13 mil
UPC
19.5 mil
UPC
Working
Range*
(.013cm)
(.019cm)
(.026cm)
(.026cm)
(.033cm)
(.049cm)
Near
2.8 in.
(7.0cm)
2.2 in.
(5.7cm)
2.0 in.
(5.0cm)
2.0 in.
(5.0cm)
2.0 in.
(5.0cm)
3.0 in.
(7.5cm)
Far
3.7 in.
(9.5cm)
6.7 in.
(17.1cm)
10.0 in.
(25.4cm)
8.3 in.
(21.0cm)
10.0 in.
(25.4cm)
11.8 in.
(30.0cm)
*Data characterized at 23°C and 0 lux ambient light.
Supported Bar Code Symbologies
Symbology Type
Symbology Name
1D Symbologies
Codabar
Code 3 of 9
Code 11
Code 93
Code 128
EAN-8
EAN-13
GS1 Databar
Interleaved 2 of 5
Matrix 2 of 5
Plessey
Standard 2 of 5
Hongkong 2 of 5
NEC 2 of 5
Straight 2 of 5 IATA 13 Digit
Straight 2 of 5 IATA 15 Digit
Telepen
Trioptic Code
GS1-128
UPC-A and UPC-E
5-1
Activating the Engine
When a scanning application is open, press the Scan key to activate the laser engine.
Using Demos
Optimus Demos are software utilities loaded on all Optimus terminals that demonstrate the advanced
features of the terminal.
To access the demo, select Start -> Programs -> Demos -> Scan Demo.
To Decode a Bar Code
1.
Select Start -> Programs -> Demos -> Scan Demo.
2.
Position the Optimus terminal over the sample bar code below.
A range of 4–10 inches (10–25 cm) from the bar code is recommended.
3.
Project the aiming beam by pressing and holding the Scan key. The Scan LED lights red.
4.
Center the aimer over the bar code.
5.
When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
Sample Bar Codes
You can use the following bar code to verify decoding:
Sample 128
Code 128
The aiming beam is smaller when the terminal is held closer to the code and larger when the terminal is
held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to
the unit whereas larger bars or elements (mil size) should be read farther from the unit.
5-2
6
Using the Image Engine
Overview
If your terminal is equipped with a image engine, it houses a compact image engine using Adaptus™
Imaging Technology that instantly reads all popular 1D and 2D bar codes and supports omni-directional
aiming and decoding. The image engine can also capture digital images, such as signatures and pictures.
Available Image Engines
5100s are equipped with 5300 Standard Range (5300SR) image engines.
Depth of Field
5300 Standard Range (5300SR)
8.3 mil
Linear
10 mil
PDF417
13 mil
UPC
15 mil
Data Matrix
15 mil
QR
35 mil
MaxiCode
Working
Range*
(.020cm)
(.025cm)
(.033cm)
(.038cm)
(.038cm)
(.089cm)
Near
3.5 in.
(8.9cm)
3.1 in.
(7.9cm)
2.1 in.
(5.3cm)
2.3 in.
5.8cm)
3.1 in.
(7.9cm)
2.0 in.
(5.1cm)
Far
7.6 in.
(19.3cm)
9 in.
(22.9cm)
13.2 in.
(33.5cm)
10.2 in.
(25.9cm)
8.8 in.
(22.4cm)
13.0 in.
(33cm)
*Data characterized at 23°C and 0 lux ambient light.
6-1
Supported Bar Code Symbologies
Symbology Type
Symbology Name
1D Symbologies
Codabar
Code 3 of 9
Code 11
Code 32 Pharmaceutical (PARAF)
Code 93
Code 128
EAN with Add-On
EAN with Extended Coupon Code
EAN-13
GS1 Databar
2D Symbologies
Aztec
Code 16K
Composite
Data Matrix
Grid Matrix
GS1 Databar
Han Xin
MaxiCode
OCR
PDF417
QR Code
Composite Codes
Aztec Mesa
Codablock F
EAN·UCC
GS1 Databar-14
OCR
OCR-A
OCR-B
OCR-US Money Font
Postal Codes
Postnet and most international 4 state codes
Australian Post
British Post
Canadian Post
China Post
Japanese Post
KIX (Netherlands) Post
Korea Post
Planet Code
6-2
Interleaved 2 or 5
Matrix 2 of 5
Plessey
PosiCode
Straight 2 of 5 IATA
Straight 2 of 5 Industrial
Telepen
Trioptic Code
GS1-128
UPC and UPC-A
Activating the Engine
When a scanning application is open, press the Scan key to activate the image engine.
Using Demos
Optimus Demos are software utilities loaded on all Optimus terminals that demonstrate the advanced
features of the terminal. There are two Demos that feature the image engine: Image Demo and Scan
Demo.
To access these demos, select Start -> Programs -> Demos.
• Select Scan Demo to verify decoding, or
• Select Image Demo to verify imaging.
Decoding
The Optimus terminal supports two types of image decoding: full-area imaging and Advanced Linear
Decoding (ALD).
Full-area Imaging
With full-area imaging the Optimus terminal supports omni-directional aiming meaning that a
positive read can be obtained from many positions. For details, see see Omni-Directional
Scanning Positions on page 6-4.
ALD
ALD provides fast reading of linear (1D) and stacked linear bar codes (PDF417). For the best
read, the aiming pattern should be centered horizontally across the bar code. When ALD is
enabled, the reader does not read matrix or postal codes.
To Decode a Bar Code
1.
Select Start -> Programs -> Demos -> Scan Demo.
2.
Position the Optimus terminal over one of the sample bar codes below.
A range of 4–10 inches (10–25 cm) from the bar code is recommended.
3.
Project the aiming brackets by pressing and holding the Scan key. The Scan LED lights red.
4.
Center the aimer crosshair over the bar code. The aiming beam should be oriented in line with the
bar code to achieve optimal decoding; Omni-Directional Scanning Positions, page 6-4
5.
When the bar code is successfully decoded, the decode LED lights green and the terminal beeps.
Sample Bar Codes
You can use the following bar codes to verify decoding:
Sample 128
Sample PDF417
Code 128
PDF417 Test Message
6-3
Omni-Directional Scanning Positions
The high-vis aiming pattern frames the bar code to provide you with the best scanning performance.
Note: To achieve the best read, the aiming beam should be centered horizontally across the bar code.
The aiming pattern is smaller when the terminal is held closer to the code and larger when the terminal is
held farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to
the unit whereas larger bars or elements (mil size) should be read farther from the unit.
6-4
Capturing Images
The image-capture process is an intuitive, split-second operation for experienced users. By following
basic guidelines, however, new users can easily develop their own technique and, with practice, quickly
learn to adapt to different application environments.
Image Preview
When the imaging process is initiated, the touch screen displays a preview of the object. This
is a live video image of what the imager is currently viewing and has a slightly degraded
appearance compared to the captured image. This is normal; the captured image has a higher
resolution.
File Formats
The Optimus terminal is capable of saving images in a BMP file format.
File Size
Digital images have a maximum image size of 752 x 480 pixels and may have up to a 256
grayscale image definition. The image quality and related file size are determined by the data
compression method used by the software application used to take the image. The average
size of the image file is approximately 300–400K. However, the size of the image depends on
image content; the more complex the content, the larger the file size.
Taking an Image
1.
Select Start -> Programs -> Demos -> Image Demo.
2.
Point the Optimus terminal at the object.
3.
Press the Scan key to activate the engine. The screen displays a preview of the object.
4.
Adjust the terminal’s position until the preview on the screen is as you want it to appear in the image.
5.
Hold the terminal still and release the Scan key.
The screen flashes, and the captured image appears on the screen.
6.
By default, the image is saved to the My Documents folder in My Device.
To save the image to another location, select File -> Save As.
High-Vis Aiming Pattern
You can enable the aiming pattern for imaging in the Image Demo application.
1. Select Start -> Programs -> Demos -> Imaging Demo -> Setup menu -> Aimer.
2.
The aiming pattern is now enabled for imaging.
Uploading Images
Image files can be transmitted to a host workstation via
• Microsoft ActiveSync and an Optimus communication peripheral
• Wireless radio: 802.11b/g and/or Bluetooth
6-5
6-6
7
Communication
Communication Options
Opitmus terminals offer several communication options including Microsoft ActiveSync and wireless
radios.
I/O Connector (Wired Communication)
The mechanical connector on the bottom panel (see I/O Connector on page 3-8) connects the
terminal to various Optimus communication peripherals that connect to a host workstation via
USB (1.1 or higher), thus enabling ActiveSync communication.
For more information, see Connecting and Synchronizing the Terminal and Workstation on
page 7-2.
Wireless Radios (Wireless Communication)
5100s can be equipped with an 802.11b/g and Bluetooth radio or a combination of these
radios.
For more information, see Wireless Radios on page 7-5.
Installing Additional Software
Optimus terminals ship with the operating system, radio drivers, and custom Honeywell software already
installed. These are the default programs that install when your terminal first boots up. You can install
additional software programs on the terminal provided that the following parameters are met:
• the software program was created for a Windows CE Core device.
• the terminal has enough memory to store and run the program.
• the program has an EXE, CAB, or DLL extension.
When selecting programs, verify that the program and version of the program are designed for the
Windows CE 5.0 Core and the terminal’s processor. You can verify your processor by selecting Start ->
Settings -> Control Panel -> System -> General tab. Make a note of the information in the Processor
field.
To install additional software, see Adding Programs Using ActiveSync or Windows Mobile Device Center
on page 7-5.
7-1
Connecting the USB Charging/Communication Cable
To facilitate USB communication between the Optimus terminal and the host workstation, you may
connect your unit to a host by using either the optional Optimus 5100 USB Communication Cable or
HomeBase. If you use the Communication Cable, insert the cable into the bottom of the terminal lining
up the terminal’s I/O connector with the cable unit’s connector. Connect the USB cable to the workstation
and the power cable to the power source, if required.
Host
Workstation
USB
Connector
I/O Connector
DC Power
Jack
USB Cable
Power Cable
Connecting and Synchronizing the Terminal and Workstation
To synchronize data between the terminal and the workstation, ActiveSync (version 4.5 or higher) or
Windows Mobile Device Center must be installed and configured for the appropriate communication type
on the host workstation (Windows-based PC) and the Optimus terminal. Optimus terminals ship with
ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just
need to connect the Optimus terminal to the host workstation (via Optimus peripheral) to initiate
communication.
If ActiveSync (4.5 or higher) or Windows Mobile Device Center is not installed on the host workstation,
you can download and install the most current version of the software from the Microsoft Web site (http:/
/go.microsoft.com/fwlink/?LinkId=147001).
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running
Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed
information on ActiveSync and WMDC visit the Microsoft Windows Phone Web site.
!
When communicating via ActiveSync or Windows Mobile Device Center, your terminal is designed to be
connected to the host workstation with a communication peripheral sold/manufactured by Honeywell, such as
the charge/communication. Use of any peripherals not sold/manufactured by Honeywell may cause damage
not covered by the warranty.
Communication Type
The 5100 supports the following type of communication via ActiveSync through its I/O Connector (see
page 3-8) on the bottom panel:
7-2
USB
The USB cable and hardware peripherals allow the Optimus terminal to communicate with a
workstation through a USB port or to a network through a USB hub. The Optimus terminal supports
full-speed USB communication (USB 1.1); maximum data transfer rate is 12 Mbps. The Optimus
terminal defaults to USB communication out of the box.
Hardware Requirements for Setup
• Optimus communication peripheral
• Optimus power cable
• USB Cable (for USB communication)
Software Requirements for Communication
• ActiveSync (v4.5 or higher) or Windows Mobile Device Center installed and configured on the host
workstation (PC), see Setting Up the Host Workstation on page 7-3.
• Windows 98 Second Edition, Windows ME, Windows 2000, WindowsNT (4.0 SP6 or higher), Windows
XP, Windows Vista, and Windows 7 operating systems.
Setting Up the Host Workstation
To synchronize data between the terminal and the workstation, ActiveSync (v4.5 or higher) or Windows
Mobile Device Center must be configured for same communication type on both the host workstation and
the Dolphin terminal.
ActiveSync
Verify that ActiveSync is configured to use the appropriate communication type.
1. In the ActiveSync window on your workstation, select File -> Connection Settings.
2.
Check the box next to “Allow USB connections”.
Setting Up the Optimus Terminal
The Optimus terminal defaults to USB communication out of the box. To verify and/or change the default
setting, select Start -> Settings -> Control Panel -> PC Connection.
Must be checked to connect to a workstation
Displays the current connection setting
Select to change the connection settings
7-3
Select Change Connection to change the current settings.
Connection Options
Select this option to …
‘USB’
Establish a USB connection.
Communicating with the Optimus Terminal
After setting up both the workstation and the terminal:
1. Connect the Optimus terminal to a communication peripheral.
2.
ActiveSync or Windows Mobile Device Center should open and connect automatically to the
Optimus terminal.
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal’s mechanical connector
connects to an Optimus peripheral that is connected to a host workstation with ActiveSync or Windows
Mobile Device Center installed. For additional information visit the Microsoft Web site (http://
go.microsot.com/fwlink/?LinkId=147001).
Exploring the Terminal from the Workstation
ActiveSync
1.
Open the main ActiveSync window (on the desktop).
2.
Click Explore. This opens the Mobile Device folder for the terminal in Windows Explorer.
3.
The Optimus terminal is now treated as a mass storage device, and transferring files is as simple as
dragging and dropping or copying and pasting.
Windows Mobile Device Center
1.
Open Windows Mobile Device Center (on the desktop).
2.
Click File Management. This opens the Mobile Device folder for the terminal.
3.
The Optimus terminal is now treated as a mass storage device, and transferring files is as simple as
dragging and dropping or copying and pasting.
7-4
Adding Programs Using ActiveSync or Windows Mobile Device Center
!
When selecting programs, verify that the program and version of the program are designed for the Windows
CE 5.0 Core and the terminal’s processor. You can verify your processor by selecting Start -> Settings ->
Control Panel -> System -> General tab. Make a note of the information in the Processor field.
Generally, software for Windows CE Core devices must be installed to the host workstation first, then
transferred to the Optimus terminal.
1. Download the program to the workstation from either the Internet or the install CD. You may see a
single *.exe or setup.exe file, a *.cab file, or *.dll. (There may also be several versions of files for different device types and processors.)
2.
Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
3.
Connect the terminal to the workstation via an Optimus communication peripheral.
If the File is an Installer
An installer program is one that installs to the workstation and the terminal simultaneously; one process
installs to both devices.
1. On the workstation, double-click the *.exe or *.setup.exe file. The installation wizard begins.
2.
Follow the directions on the workstation screen.
The installation process includes transferring the software to the terminal.
If the File is Not an Installer
Some programs cannot be installed on workstations because they are designed exclusively for Windows
CE Core devices. In these cases, the appropriate files must be stored on the host workstation and
transferred to the terminal via ActiveSync Explore or Windows Device Mobile File Management.
Note: If an installer because an error message stating that the program is valid but designed for a different type of
computer appears when you try to install the program on the workstation, the program is not an installer.
1.
If you cannot find any installation instructions for the program in the Read Me file or documentation,
do one of the following:
a. Open ActiveSync on the workstation and click Explore, or
b. Open Windows Mobile Device Center and click File Management.
2.
On the workstation, navigate to the workstation folder containing the program file(s) and copy them
to the Program Files folder on the terminal.
3.
On the terminal Desktop, select My Device and, in Windows Explorer, navigate to the folder where
the program is located.
4.
Select the program file to install it.
If you copied the file to the Autoinstall folder (\Autoinstall\Cabfile), you can choose to install
the program by performing a soft reset. The program installs as part of initialization.
5.
After installation is complete, access the program by selecting Start -> Programs, and the program
appears on the Programs screen. Select the icon to open the program.
Wireless Radios
There are two radio options: 802.11b/g and Bluetooth.
1. 802.11b/g (WPAN/WLAN configuration).
7-5
2.
Bluetooth (WPAN configuration): see Bluetooth Handler on page 8-1.
Connecting the Terminal to a Wireless Network
You connect the terminal to a wireless network through the on-board radio (802.11b/g and/or Bluetooth).
Each radio has its own configuration program and requires specific information about the wireless
network to connect. Successful connection depends on your network infrastructure about which you will
need specific information from your network administrator.
WLAN (802.11b/g Radio)
5100s can have a 2.4 GHz 802.11b/g WLAN (Wireless Local Area Network) radio that uses Direct
Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g, Wi-Ficompliant products including access points (APs), workstations via PC card adapters, and other wireless
portable devices.
By default, the 802.11b/g radio is powered-off (i.e., disabled) “out of the box.” To power it on (i.e., enable),
press the vertical arrow (bottom right corner of screen) and select Turn Wireless LAN On. The enable/
disable state of the radio will survive subsequent soft and hard resets. The next step is to configure the
connection parameters of the radio to connect to a wireless network.
Configuring the WLAN Radio
The WLAN radio is configured in the WiFi Manager, which you access by selecting the program icon in
the command bar.
7-6
8
Bluetooth Handler
Bluetooth wireless technology is a short-range communications technology to connect portable and/or
fixed devices while maintaining high levels of security.
Enabling the Bluetooth Radio
1.
Select the UP arrow in the lower, right portion of the display.
2.
Select Turn Bluetooth On.
The Bluetooth icon appears in the task bar.
Connecting to Other Devices
Before connecting to another device, make sure that the Bluetooth connection on the other device is
enabled.
1. Select on the Bluetooth icon in the task bar.
The Bluetooth Handler appears on the screen.
2. Select Scan Device.
The available services of all devices / profiles in range display in the Bluetooth Handler.
Pairing Bluetooth Devices
Connecting Bluetooth devices usually requires that they be paired; the same passkey must be entered
for each device. If you want to connect the 5100 to a device without any input method (e.g., printers,
headsets), refer to the user documentation that accompanied the device for pairing information.
1. Select on the desired device / profile in the Bluetooth Handler.
2.
Select Trusted from the drop down menu.
Once asked if you need to authenticate the device,
3. Select on the Yes button.
4.
Enter 4 random digits and select Yes.
5.
Enter the same digits on the other device when prompted.
6.
After pairing, select on the selected device / profile and select Active.
Setting Up a Bluetooth Printer
1.
Make sure that the Bluetooth printer is on and activated.
2.
If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).
3.
Select Serial tab.
4.
Select Scan Device, which runs a Bluetooth Inquiry, then SDP Query.
5.
If you see your Bluetooth printer device displayed, you can select Cancel to stop the search.
8-1
OR
Wait until all Bluetooth devices in range have been scanned and the Scan Dialog window appears.
6. Scroll through the list until your Bluetooth printer device is found. You may select any device in the
list to display its MAC address.
7.
Highlight the Bluetooth printer device and select the Select button.
8.
When the COM port selection appears, select COM7 and select OK.
9.
If successful, the COM port and MAC address of the device appears under the list of Registered
Bluetooth Virtual COM ports.
10. Select OK to exit the Bluetooth Handler.
11. One of the ways to test the connection to the printer is to follow the steps below:
a. Select Start -> Programs -> Demos -> Print Demo.
b. Select Zebra (BT) Barcodes Print.
c. If the connection is successful, the bar code prints.
8-2
9
Optimus HomeBase Device
Overview
As the hub of your Optimus 5100 system, the Optimus HomeBase charging and communication cradle
supports full-speed USB 1.1 and RS-232 communication with a workstation.
Battery Charging
The base completes a full charge of the main battery pack in four hours for the standard capacity
2200mAh pack and six hours for the extended capacity 3300mAh pack.
In addition to charging, the base powers the terminal’s intelligent battery charging system, which protects
the battery from being damaged by overcharging. The terminal senses when a battery pack is fully
charged and automatically turns off the charger. If the battery voltage drops below the charge threshold,
the charger turns on again to maintain the battery at full capacity. As a result, Optimus terminals may be
stored in the base indefinitely without damage to the terminals, battery packs, or peripherals. For
prolonged storage, see Storage Guidelines on page 3-11. The base can also charge a second battery
while the terminal is positioned in the base. See Charging a Spare Battery on page 9-5.
Power Supply
The power cable that ships with each terminal also powers the base.
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty. DO NOT attempt to charge damp/wet mobile computers or batteries.
All components must be dry before connecting to an external power source.
Front Panel
Terminal Well
Charging LED
Terminal Well
Place the Optimus terminal in the terminal well to communicate with a host device, power the
terminal, and charge the terminal’s battery. Make sure that the device is securely seated.
9-1
Rubber Feet
The bottom panel has four rubber feet to stabilize the unit on a flat surface. You can set the
base on a dry, stable surface, such as a desktop or workbench near an electrical outlet.
Back Panel
Serial Port
USB Port
DC Power Jack
DC Power Jack
Connect the power cable to this power jack; see Powering the Optimus HomeBase Device on
page 9-3.
USB Port
The USB port is full-speed (v1.1). Using the USB cable, you can connect the base to a USBcompliant device to facilitate USB communication to and from the terminal. USB
communication occurs through Microsoft ActiveSync (v.4.1 or higher). For more information
about ActiveSync setup, see Connecting and Synchronizing the Terminal and Workstation on
page 7-2.
Serial Port
The serial port supports serial communication between the terminal and another device. Note
that the connector is a DB9 Male connector, requiring a female connector on the serial cable.
The following four signals are supported:
• Transmitted Data
• Received Data
• Request to Send
• Clear to Send
Note: ActiveSync is not supported over the serial port.
9-2
Powering the Optimus HomeBase Device
The terminal requires 5 volts DC input for communication and battery charging; the power adapter on the
power cable converts the voltage from the power source to 5 volts DC. Only power adapter cables from
Honeywell convert the voltage appropriately.
The same power cable that ships with each terminal can be used to power the base. This cable contains
a plug adapter for each geography.
Plug Adapter
Power Adapter
Power Cable
1.
Attach the appropriate plug adapter to the power adapter.
2.
Plug the power cable into the power source.
3.
Plug the connector into the DC power jack on the back panel. The base is now powered.
When a terminal is properly seated, the base powers the terminal, charges the terminal’s main battery
pack, and launches ActiveSync (see Connecting and Synchronizing the Terminal and Workstation on
page 7-2).
Honeywell recommends that you leave the base connected to its power source at all times, so that it is
always ready to use.
9-3
Charging the Main Battery
The base powers the terminal and fully charges its main
battery pack in 4 or 6 hours depending on the battery.
As battery packs charge, the charging circuitry follows the twostep charging process (CC-CV) that is recommended for Li-Ion
batteries. The process monitors changes in temperature,
current, and voltage.
Inserting a Terminal
1.
Install the battery pack in the terminal; see Install the
Main Battery on page 2-1.
2.
Power the base; see Powering the Optimus HomeBase
Device on page 9-3.
3.
Slide the terminal into the terminal well making certain
that the terminal is seated properly.
4.
The battery pack begins charging.
!
9-4
Ensure all components are dry prior to mating terminals/
batteries with peripheral devices. Mating wet components may cause damage not covered by the
warranty.
Charging a Spare Battery
The base can also charge a second battery while the terminal is positioned in the base. The second
battery can be inserted in the battery charging well in back of the terminal connection. Angle the battery
as shown. Once the connectors engage, the LED lights. If the LED is red, the unit is charging; if it is green,
the charge is complete.
Charging LED
Checking Battery Power
To check battery power while the terminal is operating, select Start -> Settings -> Control Panel ->
Power.
9-5
Technical Specifications
Structural
Dimensions
5.3 in. high X 4.5 in. wide X 3.1 in. deep (13.5 cm. X 11.4 cm. X 7.9 cm.)
Weight
11.0 oz. (313g)
Material
Polycarbonate
Color
Black
Environmental
Operating Temperature
14° to 122°F (-10° to 50°C)
Storage Temperature
-4° to 158°F (-20° to +70°C)
Charging Temperature
32° to 104°F (0° to 40°C)
Electrical Static Discharge
Air:
± 15k Vdc
Direct: ± 8k Vdc
Humidity
90% relative humidity (non-condensing)
Power Supply
Input (Universal)
(from the power source)
100–240 Volts, 0.3 A
50–60Hz
Included with Optimus terminal
Output (to the base)
5 Volts DC, 2.0 A
Charging
Standard Charge
Standard Capacity: 2200mAh - four hours
Extended Capacity: 3300mAh - six hours
Max Charging Current
2A Max
Standby Current
<100mA
Status LED
Green: charged
Red: charging
Communication
Interface
USB Mini-B Male connector supports data transmission of up to12 Mbps
OR
Standard DB9 serial connector supports data transmission up to 115 Kbps
Agency Approvals
Power Supply:
UL listed
TUV licensed
Charging:
CCC
Fire Retardant:
UL 94V-O
9-6
10
Optimus QuadCharger Device
Overview
The Optimus QuadCharger device is a four-slot charging station that charges up to four Li-ion battery
packs—both standard capacity 2200mAh and extended capacity 3300mAh—in four hours and six hours
respectively. For more details about charging, see Battery Charging on page 10-2.
!
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
!
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty. DO NOT attempt to charge damp/wet mobile computers or batteries. All
components must be dry before connecting to an external power source.
QuadCharger Device
Charging Slots
Power Supply Connector
Status LEDs
Charging Slots
The charger contains four charging slots. Each slot holds one battery. When a battery is placed
in a slot, it immediately begins charging and its Status LED lights.
Status LEDs
A status LED is located at the end of each of the four battery slots. The color of the LED
indicates the charge status of the battery in the slot.
Green
Red
The battery has completed its charge cycle and is ready for use.
The battery is charging.
Power Supply Connector
Use this connector to attach the power supply to the charger. The universal power supply accepts input
voltages between 90–265 volts.
10 - 1
Battery Charging
Charging Process
This charger charges 5100 standard capacity Li-ion 2200mAh battery packs in four hours and extended
capacity 3300mAh packs in six hours. Each charging slot works independently of the other three. As
battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is
recommended for Li-Ion batteries. The process monitors changes in temperature, current, and voltage.
Temperature
The four and six-hour charge time applies when batteries are charged within the recommended
temperature range of 50° to 95° F (10° to 35°C). Temperature has a significant effect on charging. For
best results, battery packs should be at room temperature before inserting in the charger.
When the battery temperature exceeds 40°C, the charger may exceed the stated four or six-hour
! charge time. The charger stops charging if the battery temperature is greater than 40°C, but will
begin charging again when the battery temperature is less than 40°C.
Charging Batteries
1.
Supply the charger with power.
2.
Insert batteries into the appropriate slots.
The Status LED for each slot turns red to indicate that the battery is properly seated and has begun
a charge cycle.
3.
When the Status LED turns green, the battery in the slot has completed charging.
10 - 2
Recommendations for Storing Batteries
To maintain top performance from batteries, follow these storage guidelines:
• Avoid storing batteries outside of the specified temperature range of -4 to 122° F (-20 to 50°C) or in
extremely high humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.
Troubleshooting
If you encounter problems with the charger, refer to chart below for possible solutions. If problems persist,
contact Technical Assistance (see page 11-2).
Problem
Issue
The Status LED does not come on
when I insert a battery pack into a
slot.
Check the power connections to the device; make sure the battery
pack is properly seated.
10 - 3
Technical Specifications
Structural
Dimensions
7.3 in. long X 3.7 in. wide X 2.4 in. high
(18.5 cm. X 9.4 cm. X 6.1 cm.)
Weight
11.5 oz. (325g)
Material
Case: Polycarbonate
Color: Black
Capacity
Supports up to four Li-ion battery packs
Environmental
Operating Temperature
14° to 122°F (-10° to 50°C)
Storage Temperature
-4° to +158°F (-20° to +70°C)
Charging Temperature
32° to 104°F (0° to 40°C)
Electrical Static
Discharge
Air:
± 15k Vdc
Direct: ± 8k Vdc
Humidity
90% relative humidity (non-condensing)
Power Supply
Input (Universal)
100V-240V, 1.2 A
50-60Hz
Included
Output
5Volts DC, 4.0 A
Charging
Standard Charge
Standard Capacity 2200mAh - four hours
Extended Capacity 3300mAh - six hours
Status LEDs
Green: charged
Red: charging
Agency Approvals
Power Supply
UL listed
TUV licensed
Power Supply compliant to FCC part 15, Class B
Charging
CE Marking
CISPR Pub 22
Fire Retardant
UL94 V-0
10 - 4
11
Customer Support
Product Service and Repair
Honeywell International Inc. provides service for all its products through service centers throughout the
world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a
Return Material Authorization number (RMA #) before returning the product.
North America
Telephone: (800) 782-4263
E-mail: [email protected]
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
Fax: (239) 263-9689
E-mail: [email protected]
Brazil
Telephone: +55 (11) 5185-8222
Fax: +55 (11) 5185-8225
E-mail: [email protected]
Mexico
Telephone: 01-800-HONEYWELL (01-800-466-3993)
Fax: +52 (55) 5531-3672
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 2901 633
Fax: +31 (0) 40 2901 631
E-mail: [email protected]
Hong Kong
Telephone: +852-29536436
Fax: +852-2511-3557
E-mail: [email protected]
Singapore
Telephone: +65-6842-7155
Fax: +65-6842-7166
E-mail: [email protected]
China
Telephone: +86 800 828 2803
Fax: +86-512-6762-2560
E-mail: [email protected]
Japan
Telephone: +81-3-6730-7344
Fax: +81-3-6730-7222
E-mail: [email protected]
Online Product Service and Repair Assistance
You can also access product service and repair assistance online at www.honeywellaidc.com.
11 - 1
Technical Assistance
If you need assistance installing or troubleshooting your device, please call your distributor or the nearest
technical support office:
North America/Canada
Telephone: (800) 782-4263
E-mail: [email protected]
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
E-mail: [email protected]
Brazil
Telephone: +55 (11) 5185-8222
Fax: +55 (11) 5185-8225
E-mail: [email protected]
Mexico
Telephone: 01-800-HONEYWELL (01-800-466-3993)
E-mail: [email protected]
Europe, Middle East, and Africa
Telephone: +31 (0) 40 7999 393
Fax: +31 (0) 40 2425 672
E-mail: [email protected]
Hong Kong
Telephone: +852-29536436
Fax: +852-2511-3557
E-mail: [email protected]
Singapore
Telephone: +65-6842-7155
Fax: +65-6842-7166
E-mail: [email protected]
China
Telephone: +86 800 828 2803
Fax: +86-512-6762-2560
E-mail: [email protected]
Japan
Telephone: +81-3-6730-7344
Fax: +81-3-6730-7222
E-mail: [email protected]
Online Technical Assistance
You can also access technical assistance online at www.honeywellaidc.com.
11 - 2
Limited Warranty
Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects
in materials and workmanship and to conform to HII’s published specifications applicable to the products
purchased at the time of shipment. This warranty does not cover any HII product which is (i) improperly
installed or used; (ii) damaged by accident or negligence, including failure to follow the proper
maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration
by the purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface
connections, (C) static electricity or electro-static discharge, (D) operation under conditions beyond the
specified operating parameters, or (E) repair or service of the product by anyone other than HII or its
authorized representatives.
This warranty shall extend from the time of shipment for the duration published by HII for the product at
the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s
expense) during the Warranty Period to HII factory or authorized service center for inspection. No product
will be accepted by HII without a Return Materials Authorization, which may be obtained by contacting
HII. In the event that the product is returned to HII or its authorized service center within the Warranty
Period and HII determines to its satisfaction that the product is defective due to defects in materials or
workmanship, HII, at its sole option, will either repair or replace the product without charge, except for
return shipping to HII.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING
WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR
REFURBISHED PARTS. IN NO EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII ARISING IN
CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES
FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE
ACTUAL AMOUNT PAID TO HII FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL
REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
All provisions of this Limited Warranty are separate and severable, which means that if any provision is
held invalid and unenforceable, such determination shall not affect the validity of enforceability of the
other provisions hereof. Use of any peripherals not provided by the manufacturer may result in damage
not covered by this warranty. This includes but is not limited to: cables, power supplies, cradles, and
docking stations. HII extends these warranties only to the first end-users of the products. These
warranties are non-transferable.
Limited Warranty Duration
•
•
•
•
The duration of the limited warranty for terminals with an integrated imager is one year.
The duration of the limited warranty for touch screens is one year.
The duration of the limited warranty for Optimus HomeBase and Optimus QuadCharger is one year.
The duration of the limited warranty for batteries is one year.
Use of any battery from a source other than Honeywell may result in damage not covered by the
warranty. Batteries returned to Honeywell International Inc. in a reduced state may or may not be
replaced under this warranty. Battery life will be greatly increased when following the battery
instructions in this user’s guide.
11 - 3
How to Extend Your Warranty
Honeywell International Inc. offers a variety of service plans on our hardware products. These
agreements offer continued coverage for your equipment after the initial warranty expires. For more
information, contact your Sales Representative, Customer Account Representative, or Product Service
Marketing Manager from Honeywell International Inc., or your Authorized Reseller.
11 - 4
Honeywell Scanning & Mobility
9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywellaidc.com
™
5100-UG Rev A
9/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement