Gossen Metrawatt SECULIFE HIT, METRAHIT X-TRA, OUTDOOR, TECH, PRO, BASE TRMS Digital Multimeter Operating Instructions

Below you will find brief information for TRMS Digital Multimeter SECULIFE HIT, TRMS Digital Multimeter METRAHIT X-TRA, TRMS Digital Multimeter METRAHIT OUTDOOR. The Gossen Metrawatt TRMS digital multimeters are portable devices that can be held in the hand during the performance of measurements. They feature a wide range of functions and measuring ranges for a variety of applications, including voltage, current, resistance, capacitance, frequency, temperature, and diode testing. They are equipped with auto-ranging for easy operation and manual measuring range selection for high resolution measurements. These multimeters also feature data hold for easy reading of measurements. The compact size and lightweight design of the Gossen Metrawatt TRMS digital multimeters make them an ideal choice for a variety of electrical testing applications.

PDF Download
Document
TRMS Digital Multimeter SECULIFE HIT, METRAHIT X-TRA, METRAHIT OUTDOOR - Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • TRMS measurement
  • Auto-ranging for most functions
  • Manual measuring range selection
  • Data hold functions
  • Compact size and lightweight design
  • Various measuring functions including voltage, current, resistance, capacitance, frequency, temperature, and diode testing

Frequently asked questions

Press the ON / OFF | LIGHT key until 0FF appears at the display. Shutdown is acknowledged with a brief acoustic signal.

The rotary switch is linked to the automatic socket blocking mechanism, which only allows access to two connector jacks for each function. Be certain to remove the appropriate plug from its respective jack before switching to and from the “A” functions.

An individual measured value can be automatically “frozen” with the DATA function (auto-hold). This is useful, for example, when contacting the measuring points with the test probes requires your full attention. After the measuring signal has been applied and the measured value has settled in, the measured value is frozen at the digital display and an acoustic signal is generated.

Zero balancing can be cleared by once again pressing the ZERO | ESC key.

Plug the measuring cables into the instrument and measure a reference value (max. 5000 digits). Briefly press the ZERO | ESC key. The instrument acknowledges storage of the reference value with an acoustic signal, and the “ZERO REL” or the “REL” symbol appears at the LCD. The value measured at the moment the key is pressed serves as a reference value.

The multimeter may not be used in potentially explosive atmospheres. The multimeter may only be operated by persons who are capable of recognizing contact hazards and taking the appropriate safety precautions. Avoid working alone when taking measurements which involve contact hazards. Be certain that a second person is present.

Maximum allowable voltage between the voltage measuring terminals, and between all connections and earth is 1000 V for measuring category III, or 600 V for measuring category IV.

Press the ON / OFF | LIGHT key until the display appears. Power-up is acknowledged with a brief acoustic signal. As long as the key is held depressed, all of the segments at the liquid crystal display (LCD) are illuminated. The instrument is ready for use as soon as the key is released.
Preparing document for printing…
0%