Advanced Power over Ethernet Controllers Models: TS-5-POE, TS-8-PRO, TS-16-CARRIER Gigabit PoE Ports Advanced Switch Management Features Advanced Gigabit PoE Managed Switch Introducing the Advanced Power over Ethernet Controllers, TOUGHSwitch™ Networks. TOUGHSwitch PoE 10/100/1000 Mbps connectivity to devices that support passive PoE. To connect your PoE devices, simply enable PoE in the easy-to-use Each port can be individually PoE and non-PoE devices can be connected. TOUGHSwitch is available in multiple versions to meet your deployment needs. 5-port Gigabit switch with 24V PoE support. TOUGHSwitch PoE PRO is an industrial-strength, 8-port Gigabit 48V devices. Output voltage is dual TOUGHSwitch PoE PRO systems in a rack-mountable, 1U supporting up to 16 devices. Simplify Your Deployment TOUGHSwitch PoE allows network architects to design cleaner, less cluttered deployments. For example, Deployment without TOUGHSwitch 8 PoE adapters 8 power cords 8 power outlets 8 Ethernet patch cables TOUGHSwitch PoE deployments maintenance and troubleshooting. TOUGHSwitch 8-Port PoE PRO Deployment www.ubnt.com/toughswitch 2 Interface TOUGHSwitch PoE provides a control. Accessed via a secured management port and web browser, ports, showing physical connectivity, speed, and PoE status. Advanced Features TOUGHSwitch PoE is loaded with including: Port monitoring System connection and management services Virtual Local Area Network (VLAN) Spanning Tree Protocol (STP)/ Rapid Spanning Tree Protocol (RSTP) Jumbo Frame Support Ping Watchdog www.ubnt.com/toughswitch Models Features: 5 Gigabit PoE Ports Wall-Mountable Features: 8 Gigabit PoE Ports 150 W Power Tough Full Metal and Rubber Casing Features: 16 Gigabit PoE Ports 1U Rack-Mount Form Factor www.ubnt.com/toughswitch 4 5-Port TOUGHSwitch PoE Dimensions Weight 250 g Power Input 24VDC, 2.5A Power Adapter (Included) Max. Power Consumption 60 W PoE Out Voltage Range 22-24VDC Max. PoE Wattage Per Data Port 18 W ESD Rating 24 kV Air / 24 kV Contact PoE Method Passive Button Reset USB Port Processor MIPS24K 400 MHz System Memory 64 MB Code Storage 8 MB CE, FCC, IC Wall-Mount Yes Operating Temperature Operating Humidity 90% Non-Condensing Management Port N/A Data Ports LEDs Per Port Management Port Power /Link/Activity Data Ports PoE, Speed/Link/Activity Management Port (1) 10/100 Ethernet Port Data Ports (5) 10/100/1000 Ethernet Ports Front Panel Top View Back Panel www.ubnt.com/toughswitch 5 8-Port TOUGHSwitch PoE PRO Dimensions 210 x 185 x 41 mm Weight 1.24 kg Power Input Max. Power Consumption 150 W PoE Out Voltage Range 45-48VDC / 22-24VDC Max. PoE Wattage Per Data Port 18W ESD Rating 24 kV Air / 24 kV Contact PoE Method Passive Button Reset USB Port Processor MIPS24K 400 MHz System Memory 64 MB Code Storage 8 MB CE, FCC, IC Operating Temperature Operating Humidity 90% Non-Condensing Management Port N/A Data Ports LEDs Per Port Management Port Power/Link/Activity Data Ports PoE, Speed/Link/Activity Management Port (1) 10/100 Ethernet Port Data Ports (8) 10/100/1000 Ethernet Ports Front Panel Back Panel Top View www.ubnt.com/toughswitch 6 16-Port TOUGHSwitch PoE CARRIER Dimensions 481 x 44 x 188 mm Weight (2) 8-Port TOUGHSwitch PoE PROs Mounting Integrated 1U Rack-Mount Front Panel Back Panel Top View www.ubnt.com/toughswitch 7 Protect your networks from the most brutal environments with Ubiquiti Networks’ industrial-grade, shielded Ethernet cable, TOUGHCable. Increase Performance Dramatically improve your Ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables. Extreme Weatherproof Designed for outdoor use, TOUGHCables have been built to perform even in the harshest weather and environments. ESD Damage Protection Protect your networks from devastating electrostatic discharge (ESD) attacks. Extended Cable Support TOUGHCables have been developed to increase power handling performance for extended cable run lengths. Bulletproof your networks TOUGHCable is currently available in two versions: PRO Shielding Protection and CARRIER Shielding Protection. TOUGHCable Connectors 100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet ESD attacks are the leading cause for device failures. The diagram below illustrates the areas vulnerable to ESD attacks in a network. By using a grounded Ubiquiti TOUGHSwitch PoE with Ubiquiti TOUGHCable and TOUGHCable Connectors, you can effectively protect against ESD attacks. TOUGHCable PRO is a Category 5e, outdoor, carrier-class shielded cable with an integrated ESD drain wire. TOUGHCable CARRIER is a shielded cable that features an integrated ESD drain wire, anti-crosstalk divider, and secondary shielding. It is rated to provide optimal performance on Gigabit Ethernet networks. Ubiquiti TOUGHCable Unshielded cable with no ESD drain Additional Information: 24 AWG copper conductor pairs 26 AWG integrated ESD drain wire to prevent ESD attacks and damage PE outdoor-rated, weatherproof Multi-layered shielding Available in lengths of 1000 ft PoE adapter with no earth ground Ubiquiti TOUGHSwitch PoE TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor installations. It is the installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements. For further information, please visit www.ubnt.com. www.ubnt.com © 2012 Ubiquiti Networks, Inc. All rights reserved. 8 PH091712
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021