Sophos UNIX and Linux Anti-Virus User manual
Реклама
Реклама
Sophos Anti-Virus for UNIX and Linux user manual
Product version: 4
Document date: January 2011
2
Contents
user manual
1 About this manual
This manual tells you how to use and configure Sophos Anti-Virus for UNIX and Linux.
To install Sophos Anti-Virus on standalone and networked UNIX and Linux computers, see the
Sophos Anti-Virus for UNIX and Linuxstartup guide for version 4.
To install Sophos Anti-Virus so that it is updated automatically by Sophos Enterprise Console, see the Sophos Endpoint Security and Control startup guide for Linux, NetWare, and UNIX.
Sophos documentation is published at
www.sophos.com/support/docs/
.
3
4
Sophos Anti-Virus for UNIX and Linux
2 About Sophos Anti-Virus for UNIX and Linux
2.1 What Sophos Anti-Virus does
Sophos Anti-Virus detects and deals with viruses (including worms and Trojans) on your UNIX or Linux computer. As well as being able to detect all UNIX and Linux viruses, it can also detect all other viruses that might be stored on your UNIX or Linux computer and transferred to other computers. It does this by scanning your computer.
2.2 How Sophos Anti-Virus protects your computer
Sophos Anti-Virus enables you to run an on-demand scan. An on-demand scan is a scan that you initiate. You can scan anything from a single file to everything on your computer that you have permission to read. You can either manually run an on-demand scan or schedule it to run unattended.
2.3 How you use Sophos Anti-Virus
Sophos Anti-Virus has a command-line interface. This enables you to access all the
Sophos Anti-Virus functionality and to perform all configuration.
user manual
3 On-demand scanning
An on-demand scan is a scan that you initiate. You can scan anything from a single file to everything on your computer that you have permission to read. You can either manually run an on-demand scan or schedule it to run unattended.
To schedule an on-demand scan, use the command crontab. For details, see
Sophos support knowledgebase article 12176
.
3.1 Running on-demand scans
The command that you type to run an on-demand scan is sweep.
3.1.1 Scan the computer
■
To scan the computer, type:
sweep /
3.1.2 Scan a particular directory or file
■
To scan a particular directory or file, specify the path of the item. For example, type:
sweep /usr/mydirectory/myfile
You can type more than one directory or file in the same command.
3.1.3 Scan a filesystem
■ To scan a filesystem, specify its name. For example, type:
sweep /home
You can type more than one filesystem in the same command.
3.1.4 Scan a boot sector
Note: This applies only to Linux and FreeBSD.
To scan a boot sector, log in as superuser. This grants you sufficient permission to access the disk devices.
You can scan the boot sector of a logical or physical drive.
■ To scan the boot sector of specific logical drives, type:
sweep -bs=drive, drive, ...
5
Sophos Anti-Virus for UNIX and Linux
■ where drive is the name of a drive, for example /dev/fd0 or /dev/hda1.
To scan the boot sector of all logical drives that Sophos Anti-Virus recognises, type:
sweep -bs
■
To scan the master boot record of all fixed physical drives on the computer, type:
sweep -mbr
3.2 Configuring on-demand scans
In this section, where path appears in a command, it refers to the path to be scanned.
To see a full list of the options that you can use with an on-demand scan, type:
man sweep
3.2.1 Scan all file types
By default, Sophos Anti-Virus scans only executables. To see a full list of the file types that
Sophos Anti-Virus scans by default, type sweep -vv.
■ To scan all file types, not just those that are scanned by default, use the option -all. Type:
sweep path -all
Note: This makes scanning take longer, can compromise performance on servers, and can cause false virus reports.
6
3.2.2 Scan a particular file type
By default, Sophos Anti-Virus scans only executables. To see a full list of the file types that
Sophos Anti-Virus scans by default, type sweep -vv.
■
To scan a particular file type, use the option -ext with the appropriate filename extension. For example, to scan files that have the filename extension .txt, type:
sweep path -ext=txt
■
To disable scanning of a particular file type, use the option -next with the appropriate filename extension.
Note: To specify more than one file type, separate each filename extension with a comma.
3.2.3 Scan inside all archive types
You can configure Sophos Anti-Virus to scan inside all archive types. To see a list of these archive types, type sweep -vv.
■
To scan inside all archive types, use the option -archive. Type:
user manual
sweep path -archive
Archives that are “nested” within other archives (for example, a TAR archive within a ZIP archive) are scanned recursively.
If you have numerous complex archives, the scan may take longer to run. Bear this in mind when scheduling unattended scans.
3.2.4 Scan inside a particular archive type
You can configure Sophos Anti-Virus to scan inside a particular archive type. To see a list of these archive types, type sweep -vv.
■
To scan inside a particular archive type, use the option that is shown in the list. For example, to scan inside TAR and ZIP archives, type:
sweep path -tar -zip
Archives that are “nested” within other archives (for example, a TAR archive within a ZIP archive) are scanned recursively.
If you have numerous complex archives, the scan may take longer to run. Bear this in mind when scheduling unattended scans.
3.2.5 Scan remote computers
By default, Sophos Anti-Virus does not scan items on remote computers (that is, does not traverse remote mount points).
■ To scan remote computers, use the option --no-stay-on-machine. Type:
sweep path --no-stay-on-machine
3.2.6 Turn off scanning of symbolically linked items
By default, Sophos Anti-Virus scans symbolically linked items.
■ To turn off scanning of symbolically linked items, use the option --no-follow-symlinks. Type:
sweep path --no-follow-symlinks
To avoid scanning items more than once, use the option --backtrack-protection.
3.2.7 Scan the starting filesystem only
Sophos Anti-Virus can be configured not to scan items that are beyond the starting filesystem
(that is, not to traverse mount points).
■ To scan the starting filesystem only, use the option --stay-on-filesystem. Type:
7
Sophos Anti-Virus for UNIX and Linux
sweep path --stay-on-filesystem
3.2.8 Excluding items from scanning
You can configure Sophos Anti-Virus to exclude particular items (files, directories, or filesystems) from scanning by using the option -exclude. Sophos Anti-Virus excludes any items that follow the option in the command string. For example, to scan items fred and harry, but not tom or peter, type:
sweep fred harry -exclude tom peter
You can exclude directories or files that are under a particular directory. For example, to scan all of Fred’s home directory, but exclude the directory games (and all directories and files under it), type:
sweep /home/fred -exclude /home/fred/games
You can also configure Sophos Anti-Virus to include particular items that follow the option
-include. For example, to scan items fred, harry, and bill, but not tom or peter, type:
sweep fred harry -exclude tom peter -include bill
3.2.9 Scan file types that UNIX defines as executables
By default, Sophos Anti-Virus does not scan file types that UNIX defines as executables.
■
To scan file types that UNIX defines as executables, use the option --examine-x-bit. Type:
sweep path --examine-x-bit
Sophos Anti-Virus still scans files that have filename extensions that are in its own list as well.
To see a list of these filename extensions, type sweep -vv.
8
user manual
4 What happens if viruses are detected
If an on-demand scan detects a virus, by default Sophos Anti-Virus displays a command-line alert.
It reports the virus on the line which starts with
>>>
followed by either
Virus
or
Virus
Fragment
:
SWEEP virus detection utility
Version 4.58.0 [Linux/Intel]
Virus data version 4.58, October 2010
Includes detection for 1375239 viruses, Trojans and worms
Copyright (c) 1989-2010 Sophos Group. All rights reserved.
System time 13:43:32, System date 22 September 2010
IDE directory is: /usr/savides/
Using IDE file nyrate-d.ide
. . . . . . . . . . . . . .
Using IDE file injec-lz.ide
Quick Scanning
>>> Virus 'EICAR-AV-Test' found in file /usr/mydirectory/eicar.src
33 files scanned in 2 seconds.
1 virus was discovered.
1 file out of 33 was infected.
Please send infected samples to Sophos for analysis.
For advice consult www.sophos.com or email [email protected]
End of Sweep.
For information about cleaning up viruses, see
9
Sophos Anti-Virus for UNIX and Linux
5 Cleaning up viruses
5.1 Get cleanup information
If viruses are reported, you can get information and cleanup advice from the Sophos website.
To get cleanup information:
1. Go to the security analyses page (
www.sophos.com/security/analyses
).
2. Search for the analysis of the virus, by using the name that was reported by Sophos Anti-Virus.
5.2 Quarantining infected files
You can configure an on-demand scan to put infected files into quarantine to prevent them from being accessed. It does this by changing the ownership and permissions for the files.
Note: If you specify disinfection (see
(page 11)) as well as quarantining,
Sophos Anti-Virus attempts to disinfect infected items and quarantines them only if disinfection fails.
In this section, where path appears in a command, it refers to the path to be scanned.
5.2.1 Specify quarantining
■ To specify quarantining, use the option --quarantine. Type:
sweep path --quarantine
5.2.2 Specifying the ownership and permissions that are applied
By default, Sophos Anti-Virus changes:
■ The user ownership of an infected file to the user running Sophos Anti-Virus.
■
The group ownership of the file to the group to which that user belongs.
■
The file permissions to
-r--------
(0400).
If you prefer, you can change the user or group ownership and file permissions that
Sophos Anti-Virus applies to infected files. You do so by using these parameters: uid=nnn user=username gid=nnn group=group-name mode=ppp
10
user manual
You cannot specify more than one parameter for user ownership or for group ownership. For example, you cannot specify a uid and a user.
For each parameter that you do not specify, the default setting (as given earlier) is used.
For example:
sweep fred --quarantine:user=virus,group=virus,mode=0400
changes an infected file’s user ownership to “virus”, the group ownership to “virus”, and the file permissions to
-r--------
. This means that the file is owned by the user “virus” and group
“virus”, but only the user “virus” can access the file (and only for reading). No-one else (apart from root) can do anything to the file.
You may need to be running as a special user or as superuser to set the ownership and permissions.
5.3 Cleaning up infected files
You can configure an on-demand scan to clean up (disinfect or delete) infected files. Any actions that Sophos Anti-Virus takes against infected files are listed in the scan summary and logged in the Sophos Anti-Virus log. By default, cleanup is disabled.
In this section, where path appears in a command, it refers to the path to be scanned.
5.3.1 Disinfect a specific infected file
■
To disinfect a specific infected file, use the option -di. Type:
sweep path -di
Sophos Anti-Virus asks for confirmation before it disinfects.
Note: Disinfecting an infected document does not repair any changes the virus has made to the document. (See
(page 10) to find out how to view details on the
Sophos website of the virus’s side-effects.)
5.3.2 Disinfect all infected files on the computer
■ To disinfect all infected files on the computer, type:
sweep / -di
Sophos Anti-Virus asks for confirmation before it disinfects.
Note: Disinfecting an infected document does not repair any changes the virus has made to the document. (See
(page 10) to find out how to view details on the
Sophos website of the virus’s side-effects.)
11
Sophos Anti-Virus for UNIX and Linux
5.3.3 Delete a specific infected file
■ To delete a specific infected file, use the option -remove. Type:
sweep path -remove
Sophos Anti-Virus asks for confirmation before it deletes.
5.3.4 Delete all infected files on the computer
■
To delete all infected files on the computer, type:
sweep / -remove
Sophos Anti-Virus asks for confirmation before it deletes.
5.3.5 Disinfect an infected boot sector
Note: This applies only to Linux and FreeBSD.
■ To disinfect an infected boot sector, use the disinfection option -di and the boot sector option
-bs. For example, type:
sweep -bs=/dev/fd0 -di
where /dev/fd0 is the name of the drive that contains the infected boot sector.
Sophos Anti-Virus asks for confirmation before it disinfects.
5.4 Recovering from virus side-effects
Recovery from virus infection depends on how the virus infected the computer. Some viruses leave you with no side-effects to deal with; others may have such extreme side-effects that you have to restore a hard disk in order to recover.
Some viruses gradually make minor changes to data. This type of corruption can be hard to detect.
It is therefore very important that you read the virus analysis on the Sophos website, and check documents carefully after disinfection.
Sound backups are crucial. If you did not have them before you were infected, start keeping them in case of future infections.
Sometimes you can recover data from disks damaged by a virus. Sophos can supply utilities for repairing the damage caused by some viruses. Contact Sophos technical support for advice: see
12
user manual
6 Appendix A: On-demand scan return codes
sweep returns a code to the shell that indicates the result of the scan. You can view the code by entering a further command after the scan has finished, for example:
echo $?
Return code
0
1
2
Description
No errors occur and no viruses are detected
The user interrupts the scan by pressing CTRL+C
An error occurs that prevents further execution of a scan
A virus is detected 3
6.1 Extended return codes
sweep returns a more detailed code to the shell if you run it with the-eec option. You can view the code by entering a further command after the scan has finished, for example:
echo $?
28
32
Extended return code
0
8
16
20
24
Description
No errors occur and no viruses are detected
A survivable error occurs
A password-protected file is found (it is not scanned)
An item containing a virus is detected and disinfected
An item containing a virus is found and not disinfected
A virus is detected in memory
An integrity check failure occurs
13
Sophos Anti-Virus for UNIX and Linux
Extended return code
36
40
Description
An unsurvivable error occurs
The scan is interrupted
14
user manual
7 Troubleshooting
This section describes how to deal with problems that might arise when usingSophos Anti-Virus.
For information about Sophos Anti-Virus return codes for on-demand scans, see
(page 13).
7.1 Computer reports “not found”, “No manual entry for sweep”, or
“cannot load library”
Symptom
When you try to run sweep or view the sweep man page, the computer displays a message similar to one of the following: command not found man page not found
No manual entry for sweep library not found cannot load library
Cause
This is probably because your environment variables do not include the directories that Sophos
Anti-Virus uses.
Resolve the problem
1. If you are running the sh, ksh or bash shell, open /etc/profile for editing.
If you are running the csh or tcsh shell, open /etc/login for editing.
Note: If you do not have a login script or profile, carry out the following steps at the command prompt. You must do this every time that you restart the computer.
2. Check that the environment variables include the directories that Sophos Anti-Virus uses:
PATH should include /usr/local/bin
MANPATH should include /usr/local/man
LD_LIBRARY_PATH should include /usr/local/lib
Note: On AIX, the library environment variable is LIBPATH, and on HP-UX it is SHLIB_PATH.
3. If the environment variables do not include these directories, add them as follows. Do not change any of the existing settings.
If you are running the sh, ksh or bash shell, type:
15
Sophos Anti-Virus for UNIX and Linux
PATH=$PATH:/usr/local/bin export PATH
MANPATH=$MANPATH:/usr/local/man export MANPATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib export LD_LIBRARY_PATH
If you are running the csh or tcsh shell, type:
setenv PATH values:/usr/local/bin
setenv MANPATH values:/usr/local/man
setenv LD_LIBRARY_PATH values:/usr/local/lib where values are the existing settings.
Note: On some systems, for example FreeBSD and Linux, you can enable Sophos Anti-Virus to use the Sophos Anti-Virus shared libraries by running ldconfig. This might require editing of /etc/ld.so.conf.
4. Save the login script or profile.
7.2 Sophos Anti-Virus runs out of disk space
Symptom
Sophos Anti-Virus runs out of disk space, perhaps when scanning complex archives.
Causes
This might be for one of the following reasons:
■
When it unpacks archives, Sophos Anti-Virus uses the /tmp directory to store its working results. If this directory is not very large, Sophos Anti-Virus may run out of disk space.
■
Sophos Anti-Virus has exceeded the user’s quota.
Resolve the problem
Try one of the following:
■
Enlarge /tmp.
■
Increase the user’s quota.
■
Change the directory that Sophos Anti-Virus uses for working results. You can do this by setting the environment variable SAV_TMP.
16
user manual
7.3 On-demand scanning runs slowly
This problem may arise for one of the following reasons:
Symptom
Sophos Anti-Virus takes significantly longer to carry out an on-demand scan.
Causes
This might be for one of the following reasons:
■
By default, Sophos Anti-Virus performs a quick scan, which scans only the parts of files that are likely to contain viruses. If scanning is set to full (using the option -f), it scans the whole file.
■
By default, Sophos Anti-Virus scans only particular file types. If it is configured to scan all file types, the process takes longer.
Resolve the problem
Try one of the following, as appropriate:
■
Avoid using full scanning unless you are advised to, for example by Sophos technical support.
■
To scan files that have specific filename extensions, add those extensions to the list of file types
that Sophos Anti-Virus scans by default. For more information, see
(page 6).
7.4 Archiver backs up all files that have been scanned on demand
Symptom
Your archiver always backs up all the files that Sophos Anti-Virus has scanned on demand.
Cause
This is because of changes that Sophos Anti-Virus makes in the “status-changed” time of files. By default, Sophos Anti-Virus tries to reset the access time (atime) of files to the time shown before scanning. However, this has the effect of changing the inode status-changed time (ctime). If your archiver uses the ctime to decide whether a file has changed, it backs up all files scanned by
Sophos Anti-Virus.
Resolve the problem
Run sweep with the option --no-reset-atime.
17
Sophos Anti-Virus for UNIX and Linux
18
7.5 Virus not cleaned up
Symptoms
■
Sophos Anti-Virus has not attempted to clean up a virus.
■
Sophos Anti-Virus displays
Disinfection failed
.
Causes
This might be for one of the following reasons:
■
Automatic cleanup has not been enabled.
■
Sophos Anti-Virus cannot disinfect that type of virus.
■
The infected file is on a removable medium, for example floppy disk or CD, that is write-protected.
■
The infected file is on an NTFS filesystem.
■
Sophos Anti-Virus does not clean up a virus fragment because it has not found an exact virus match.
Resolve the problem
Try one of the following, as appropriate:
■
Enable automatic cleanup.
■
If possible, make the removable medium writeable.
■
Deal with files that are on an NTFS filesystem on the local computer instead.
7.6 Virus fragment reported
Symptom
Sophos Anti-Virus reports that it has detected a virus fragment.
Causes
This indicates that part of a file matches part of a virus. This is for one of the following reasons:
■
Many new viruses are based on existing ones. Therefore, code fragments that are typical of a known virus might appear in files that are infected with a new one.
■
Many viruses contain bugs in their replication routines that cause them to infect target files incorrectly. An inactive part of the virus (possibly a substantial part) may appear in the host file, and this is detected by Sophos Anti-Virus.
■
When running a full scan, Sophos Anti-Virus may report that there is a virus fragment in a database file.
user manual
Resolve the problem
1. Update Sophos Anti-Virus on the affected computer so that it has the latest virus data.
2. Try to disinfect the file: see
Disinfect a specific infected file
(page 11).
3. If virus fragments are still reported, contact Sophos technical support for advice: see
(page 20).
19
Sophos Anti-Virus for UNIX and Linux
8 Technical support
You can find technical support for Sophos products in any of these ways:
■ Visit the SophosTalk community at
http://community.sophos.com/
and search for other users who are experiencing the same problem.
■ Visit the Sophos support knowledgebase at
http://www.sophos.com/support/
.
■
Download the product documentation at
http://www.sophos.com/support/docs/
.
■
Send an email to
, including your Sophos software version number(s), operating system(s) and patch level(s), and the text of any error messages.
20
user manual
9 Legal notices
Copyright
©
2002–201
1 Sophos Limited. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the licence terms or you otherwise have the prior permission in writing of the copyright owner.
Sophos and Sophos Anti-Virus are registered trademarks of Sophos Limited. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
21
Sophos Anti-Virus for UNIX and Linux
Index
A
alerts
archives
B
boot sectors
C
CLI (command-line interface) 4
command-line interface (CLI) 4
D
directories, on-demand scans 5
disinfecting
E
excluding items
22
F
file types, on-demand scans 6, 8
filesystems, on-demand scans 5, 7
I
infected files
L
M
N
O
boot sectors 5 computer 5 directories 5
excluding items 8 file types 6, 8
filesystems 5, 7 remote computers 7 symbolically linked items 7
Q
quarantining infected files 10
R
remote computers, on-demand scans 7
S
symbolically linked items, on-demand scans 7
U
UNIX executables, on-demand scans 8
V
viruses
fragment reported 18 not cleaned up 18
user manual
23
Изтегляне
Публичната връзка е актуализирана
Публичната връзка към вашия чат е актуализирана. You may view and manage your chat links after registration here.
Публична връзка към документа
Реклама