Viking E-40 -SS, -BN, -PB, -WH, -BK, C-200, C-250, C-2000B, K-1900-5, DLE-200B, SLP-1, SLP-4 entry phone Technical Practice

Below you will find brief information for E-40 E-40-SS, E-40 E-40-BN, E-40 E-40-PB, E-40 E-40-WH, E-40 E-40-BK, C-200 C-200, C-250 C-250, C-2000B C-2000B, K-1900-5 K-1900-5. You can use this device to provide two-way handsfree communication at your door or gate, provide unique front and back door chimes and paging when used with a Viking SLP-1, SLP-4 and C-2000B, control an E-40 on a single line, control 1 to 4 E-40's and door/gate control on a single phone line, provide automatic speed dialing on telephone lines or analog PABX/KSU station ports, use on any analog PABX station port with programmable ringdown capability.

PDF Download
Document
E-40 E-40-SS, E-40 E-40-BN, E-40 E-40-PB, E-40 Technical Practice | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Compact Size
  • Weather Resistant Features
  • Vandal Resistant Features
  • Telephone line powered
  • Microphone and speaker volume controls
  • Programmable Intelligent call progress detection
  • Selectable auto answer feature
  • Programmable VOX (mic/speaker) switching speed
  • Blue LED

Frequently asked questions

The speaker volume can be adjusted to increase or decrease the speaker volume to the level desired using the speaker volume pot.

If the microphone volume is set too high or too low, one-way talk path may occur. You need to adjust the microphone volume using the microphone volume pot.

The E-40 can be programmed from any Touch Tone phone using a telephone line, Viking model C-200, C-250 or C-2000B Entry Phone Controller, analog PABX/KSU station or a Viking model DLE-200B Line Simulator.
ALP:
Preparing document for printing…
0%