Technical Data Sheet
Innovating the Future of Global Communications
PS-1F
Flush-Mount Power Supply
The RTS Audiocom Model PS-1F Power Supply mounts in a standard two-gang electrical outlet box. It may be used to power a single intercom channel containing up to 4 beltpack headset stations.
Line Drawings
Innovating the Future of Global Communications
Specifications
General
Power Requirements ........................................................................................................... 105-125 Vac, 50-60 Hz, 30 Watts
Output Voltage ............................................................................................... 24 Vdc regulated (less than 50 millivolts ripple)
Output Current .................................................................................................................500 milliamps maximum continuous
240 milliamps short circuit current limiting
Channel Terminating Impedance (provided by PS-1F) ........................................................................................300 Ω +-15%
Connectors
Intercom Channel .....................................Three screw terminals with wire clamps for No.14-22 AWG stranded or solid wire
Power ......................................................................................................................................................... Three-wire pigtails
Note
Not recommended for systems with over 300’ (91.44m) of total cable runs.
Order Information
• PS-1F • Flush-Mount Power Supply
For ordering information, contact your regional sales representative at: http://rtsintercoms.com/us/intercom/contact
The specification information is preliminary and is subject to change without notification.
Brand names mentioned are the property of their respective companies.
Bosch Security Systems, Inc. | 12000 Portland Avenue South | Burnsville, Minnesota 55337
Telephone: 877·863·4169 | Fax: (800) 323-0498
Form Number: F.01U.278.887 Rev 02
Date: February 2013 www.rtsintercoms.com