User Manual
SUPER NOVA
EC - Declaration of Conformity
We declare that our products (lighting equipments) comply with the following
specification and bears CE mark in accordance with the provision of the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002;
EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6: 1996,
EN61000-4-11: 1994.
&
Harmonized Standard
EN60598-1: 2000+ALL: 2000+A12: 2002
Safety of household and similar electrical appliances
Part 1: General requirements
User Manual
Professional Entertainment Technology
Innovation, Quality, Performance
5
4. Features
TABLE OF CONTENTS
1. Safety Instruction
2. Installation
y
An innovative LED moonflower effect delivering white sharp beams.
y
Integrated with state of 3W LED technology and stylish design.
y
Wide beam angle covers a large area of the dancing floor.
y
Low power consumption, extreme long life LED.
y
Runs all night long, no duty cycle.
y
Big heat sink without fan cooled for better ventilation.
5. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
3. Technical Specification
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater
accumulation of dirt on the unit’s optics.
y Clean with soft cloth using normal glass cleaning fluid.
4. Features
y Always dry the parts carefully.
5. Fixture Cleaning
y Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days.
1
4
2. Installation
1. Safety Instruction
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. And make sure that the structure
Please read the instruction carefully which including important
to which you are attaching the unit is secure and is able to support a weight of 10 times of
the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the
information about the installation, operation and maintenance.
WARNING
unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out
y
of the touch of people and has no one pass by or under it.
Please keep this User Manual for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
y
Unpack and check carefully there is no transportation damage before using the unit.
y
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
y
y
y
The unit is for indoor use only and use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
3. Technical Specification
y
Disconnect mains power before fuse replacement or servicing.
y
Replace fuse only with the same type.
y
Make sure there are not flammable materials close to the unit while operating as it is fire
hazard.
• Voltage: AC 120V~60Hz/230V~50Hz
y
Use safety cable when fixes this unit.
• LED: 1 x 3W white LED
y
Maximum ambient temperature is TA: 40℃ and don’t operate it where the temperature
• Fuse: T250mA
is higher than this.
• Dimension: 202x 141 x 192 mm
y
• Weight: 2kg
Unit surface temperature may reach up to 60℃. Don’t touch the housing bare-hand
during its operation. Turn the power off and wait for 15 minutes for cool down before
replacing bulb or serving.
y
In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repair carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center and
always use the same type spare parts.
3
y
Don’t connect the device to any dimmer pack or power pack.
y
Do not touch any wire during operation as high voltage might be causing electric shock.
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement