Fishman F1 Aura Plus User guide
Fishman F1 AURA+ is a sophisticated acoustic guitar preamp and effects pedal that enhances and amplifies the natural sound of your instrument. With its advanced Aura Acoustic Imaging Technology, it can restore the studio-miked sound of your guitar, offering an incredibly accurate recreation of the original recording.
Advertisement
Advertisement
www.fishman.com
USER GUIDE
F1 AURA+
Welcome
Thank you for making Fishman a part of your acoustic experience. We are proud to offer you the fi nest acoustic amplifi cation products available; high-quality professional-grade tools to empower you to sound your very best. We are confi dent F1 Aura+ will both enhance and inspire your music making.
Despite its simple and clean appearance, F1 Aura+ features a powerful set of tone shaping controls and programmability. We urge you to read through this user guide and spend some time getting familiar with its operation, so that you may easily realize the system’s full potential.
Aura Acoustic Imaging Technology uses digital algorithms developed in
Fishman’s audio laboratories to restore a studio-miked sound to an acoustic instrument. To achieve this, we’ve recorded this instrument using world-class microphones and techniques to capture an “Image” of the natural sound that it emits when miked in a professional studio. This Image, when recorded direct or played through an amp, mixer or PA, blends with the undersaddle pickup to produce an incredibly accurate recreation of the original recording.
2
3
Quick Start
Before you begin, set the controls as shown:
1. Plug in • Use a ¼-inch instrument cable.
2. Tune up • Press and hold the Volume knob until the tuner comes on. When engaged, the Tuner mutes the output. Press Volume to exit Tuner.
3. Turn up • Raise the Volume to a desirable level.
4. Select an Image Preset • Press the Tone control repeatedly to select presets 1, 2 and 3. Press again to select the dry pickup (which is displayed as “P”).
5. Adjust Tone • Turn the Tone control clockwise to blend in a “mid-scooped” tone with emphasized bass & treble and reduced midrange.
4
Quick Start Controls
3 Image Presets
& dry pickup press
Flat
Tone Control
Mid
Scoop
Turn to adjust Volume
Press to toggle Phase
Hold for Tuner
5
Easy Mode
When shipped from the factory, F1 Aura+ offers a simple set of user controls called Easy Mode. This mode allows you to quickly get a feel for the tonal possibilities of F1 Aura+ while providing the most important features you’ll need every day.
Tone: turn to adjust mid scoop
Preset: press repeatedly for preset 1, 2, 3, dry pickup
Volume: turn for volume
Tuner: press + hold 2 seconds press to exit tuner
Phase: press to toggle
6
Multi-function Controls
With F1 Aura+, both the Edit and Volume knobs contain a momentary switch.
So, in addition to turning a knob, pressing down on the knob will gain access to one or more features.
For this reason, this guide will refer to knob actions as: turn, press, or press+hold.
Refer to the chart on page 19 for a quick reference of the various features.
Press Press + Hold
Edit
Turn to adjust
Volume
7
Performance Mode
For the more adventurous player, we’ve created a much deeper control interface called Performance mode. This mode gives you full access to an extensive set of tone shaping controls. And to make things easier while you perform, we’ve grouped some controls into Play and the rest into Edit. Play and Edit are described on the following pages.
Entering Performance Mode
F1 Aura+ is shipped from the factory to power up in Easy Mode (page 6). To change the preamp to power-up into Performance Mode:
1. Press + hold the Edit knob (Tone control) while plugging in the guitar.
Continue to hold the Edit knob down when the tuner displays the letter “R” and then the letter “ P”.
2. While still holding the Edit knob, press the Volume knob. Release both knobs.
Performance mode is selected when the “ P” stops fl ashing and the unit returns to normal operation.
8
Play vs. Edit
Play
Once in Performance Mode, plug in your instrument and it powers up into Play.
In Play, Volume, Blend and Phase can be adjusted. The chromatic Tuner and the automatic Anti-Feedback circuit can also be activated. The Tone control is now referred to as the Edit knob.
Edit
Press and release the Edit knob to enter Edit; the tuner’s green in-tune LED will light solid. Once in Edit, press the Edit knob repeatedly to step through the parameters. Each parameter is displayed using a single letter to represent its function (see page 19). Adjust its value by turning the Edit knob. A number is displayed and the tuner’s sharp/fl at lights show positive or negative values.
Note: F1 Aura+ is programmable and automatically saves your settings.
To exit Edit and return to Play, wait 15 seconds for the display to go dark, or press
+ hold the Edit knob for 2 seconds. You may also immediately exit by simultaneously pressing both the Edit and Volume knobs.
9
Play Controls
Measure – Press together to start Anti-feedback search
Blend
More
Image
More
Pickup
Volume: turn for volume
Tuner: press + hold 2 seconds press to exit tuner
Phase: press to toggle
10
Volume
Turn Volume • For the cleanest noise-free sound, set Volume as high as possible without causing your amp or mixer to distort.
Phase
Press and release Volume • Use the Phase setting to improve bass response at low volume and suppress feedback at high volume. Press the Volume knob several times and leave it in the position most pleasing to your ear.
Tuner note raised
1/2 step
Press+hold Volume 2 seconds to turn tuner on.
Press Volume once to turn it off.
This digital chromatic tuner accommodates all tunings and mutes the output when engaged.
It can be activated without an instrument cable connected, in which case it will turn itself off after 90 seconds of inactivity.
The tuner is calibrated to A = 440.
“A#” note in tune
11
“A” note below pitch
“A” note above pitch
Play Controls (cont.)
Blend
Turn Edit • Turn the Edit knob without pressing on it and the balance between pickup and Image is adjusted. A setting of P = 100% Pickup signal; 0 = a 50/50 pickup/Image blend; I = 100% Image signal.
Suggestions
• For live performance try backing off the Image by setting Blend to about 2 or 3 (about 65% pickup).
• For recording, try blending in more Image for a realistic acoustic sound.
Automatic Anti-Feedback
Use this search-and-destroy Anti-Feedback circuit in addition to Phase to control feedback during a performance. F1 Aura+ automatic Anti-Feedback circuit can apply up to three separate notch fi lters, which are very precise tone controls that reduce only a tiny piece of the audio band. When activated, the fi lter locates and reduces the problematic resonances associated with feedback.
12
While the Anti-Feedback control is very effective, it’s best if you spend some time while setting up before a performance and catch any issues before you begin to play. With some practice, you’ll fi nd you can also use it to “fi x” any resonant notes that may stand out in a particular venue.
Using the automatic Anti-Feedback control:
1. Press + hold both Edit and Volume for 2 seconds. The tuner display will fl ash a “1” to indicate it is searching for the fi rst feedback.
2. Turn up the Volume, then either dampen the strings while tapping the body or play the troublesome note until the feedback begins. The fi lter will automatically identify and eliminate the feedback. The “ 1” in the display will now light solid.
3. At this point, you may continue to turn up your Volume as in step 2 to identify up to two more problematic resonances. Each is indicated via a fl ashing “ 2” or
“ 3” during the search, in turn lighting solid when the resonance has been identifi ed.
4. You may press the Volume knob at any time to cancel the search. The circuit will hold the notched frequenc(ies) in memory until the process is repeated.
13
Edit Controls
Press Edit knob to enter Edit; the tuner’s green in-tune LED will light solid.
Once in Edit, press the Edit knob repeatedly to step through the parameters.
Each parameter is displayed using a single letter to represent its function.
Adjust its value by turning the Edit knob. A number is displayed and the tuner’s sharp/fl at LEDs indicate positive/negative values.
Note: F1 Aura+ is programmable and automatically saves your settings.
To exit Edit, wait 15 seconds for the display to go dark, or press + hold the Edit knob for 2 seconds. You may also immediately exit by simultaneously pressing both the Edit and Volume knobs.
14
1. Press to enter Edit.
Press
Edit repeatedly to select next parameter.
Press Press
Press
Image
Select
Pickup
Treble EQ
Pickup
Mid EQ
The sharp and flat LEDs indicate + or - values.
2. Turn Edit to adjust
-3 0
+1
3. To exit Edit, wait 15 seconds, or press + hold Edit for 2 seconds. You may also immediately exit by simultaneously pressing both the Edit and Volume knobs.
15
Edit Controls (cont.)
Image Select
F1 Aura+ is factory loaded with Images created especially for this instrument.
Each Image corresponds to a different microphone type and position. Contact the guitar’s manufacturer to identify the microphone associated with each Image.
Pickup EQ
Bass, Mid and Treble controls allow you to fi ne tune the pickup signal. The pickup tone controls are designated by the capital letters T, M, B, corresponding to Treble, Mid, and Bass respectively.
Blend
Blend adjusts the balance between the pickup and Image and is represented by the letter X. A setting of P = 100% Pickup signal; 0 = a 50/50 pickup/Image blend; I = 100% Image signal.
16
Compressor
The Compressor (C) parameter adjusts several settings within a sophisticated automatic leveling circuit. As you increase the value, your overall playing dynamics become increasingly limited, making softer notes louder while controlling loud spikes in your playing. This can be helpful in performances where you desire a more even level to your playing. At its maximum setting, there may be some overall increase in the output level.
Anti-Feedback
This parameter, indicated with the letter A, allows you to temporarily disable the automatic Anti-Feedback fi lter if desired. O = Off, I = On. See page 12 for details on how to use the Anti-Feedback circuit.
17
Edit Controls (cont.)
Image EQ
You can program unique EQ settings for each of the Images. Unlike other Edit parameters, unique tone settings are automatically saved with each Image and recalled when an Image is selected. In order to prevent dramatic or unwanted changes, the Image EQ’s Treble, Mid, and Bass controls are separated from the
Pickup EQ and located “under” the Volume knob in Edit. They are identifi ed by a lowercase t, m, b, corresponding to Treble, Mid, and Bass respectively.
To EQ an Image:
1. Adjust the Blend control so that you are hearing 100% Image (page 12)
2. Press Edit knob to enter Edit and select an Image
3. Press the Volume button to select the Image Treble EQ (t)
4. Turn the Edit knob to boost or cut the Image Treble EQ
5. Repeat steps 3 & 4 to adjust the Image Mid (m) and Image Bass (b)
18
Edit Parameters
Image Select
Pickup Treble EQ
Pickup Mid EQ
Pickup Bass EQ
Pickup/Image Blend
Compressor
Anti-Feedback
19
Image Treble EQ
Image Mid EQ
Image Bass EQ
Power
Plug in the guitar, and F1 Aura+ switches on. To conserve the battery, remove the instrument cable from the guitar when the system is not in use.
The tuner display will fl ash at power-up to tell you the preamp is on.
Low Battery Indicator
When the tuner fl ashes “ L” once every three seconds, you have approximately
1.5 hours before the battery is exhausted. Change it at the next opportunity.
20
Restoring Easy Mode
There may be times when you want to return F1 Aura+ to Easy mode without losing your Performance mode settings. To do this:
1. Press + hold the Edit knob while plugging in the guitar. Continue to hold the
Edit knob down when the tuner displays the letter “R” and then the letter “I”.
2. While still holding the Edit knob, press the Volume knob. Release both knobs.
Easy mode is selected when the “ I” stops fl ashing and the unit returns to normal operation.
21
Restore Factory Defaults
1. Press + hold the Edit knob while plugging in the guitar. Continue to hold the
Edit knob down when the tuner displays the letter “R”.
2. Continue to hold the Edit knob, then press the Volume knob. Release both knobs. Factory reset is complete when the “ R” stops fl ashing and the unit returns to normal operation.
Defaults:
• EQ for all Images reverts to fl at
• Pickup EQ reverts to fl at
• Blend is set to 50/50
• Compressor is set to minimum
• Anti-Feedback frequency is reset to 100Hz
• Image selector reverts to Image #1
22
Electrical Specifi cations
Digital Signal Path:
A/D, D/A conversion:
Signal Processing:
Typical in-use current consumption @ 9VDC:
Typical 9V lithium battery life:
Typical 9V alkaline battery life:
Nominal output impedance:
Recommended load impedance:
Maximum output level (onset of clipping):
Baseline noise:
Dynamic Range:
Bass control:
Midrange control:
Treble control:
All specifi cations subject to change without notice.
24-bit
32-bit
18mA
54 hours
27 hours
1k Ohm
10k Ohm and up
+5dBV
-92dBV
97dB
±12dB @ 70Hz
±12dB @ 1kHz
±12dB @ 6.5kHz
23
www.fi shman.com
513-300-188 Rev A 10-11

Public link updated
The public link to your chat has been updated.
Advertisement