MCRW-G-5 - Omnitron
MCRW-G-5
Desktop PCMCIA Card Reader/Writer With Serial Interface
The MCRW-G (Memory Card Reader Writer) is a reader/writer with one card slot for PCMCIA/JEIDA
compatible memory cards. These cards are widely used in the industry, mobile computers and are
available from many manufacturers in various sizes and types. The MCRW-G contains sophisticated
software that automatically analyses and handles all card specific parameters and therefore supports a
wide variety of cards of any size: ATA FLASH, CompactFlash*, SmartMedia*, PCMCIA hard disk, SRAM,
ROM, OTP, E(E)PROM, FLASH , as well as User specific I/O cards.
To interface those cards to the Host equipment the MCRW-G has an RS-232 interface with a selectable
Baud rate. Simple straight forward commands allow complete remote control of the unit out of any
application written in any language and without the need of an operating system. The card slot accepts
all PC Cards size up to type III.
Technical Features
Physical
Desktop case (56 x 179 x 215 mm)
X
Weight
0.43 kg
RS-232 Interface
X
Single PC Card slot for Type I -III card X
Card Support
PC-ATA card support
X
SRAM read and write
X
ROM, EPROM, FLASH, OTP read
X
FLASH memory write/erase
X
EEPROM write/erase
X
User specific I/O card access
X
FORTEZZA Cryptocard and compatible X
Electrical & Connections
Supply voltage (90-264V/50-60Hz)
X
Current consumption (max)
15 W
RS-232 Interface connector
DB-25, female
Baudrate
300 .. 38.4 kbit/sec
Handshake
XON/XOFF
Environment
Temperature range 5°C.....40°C
X
UL listed and FCC Class B compliant
X
CE compliant
X
Typical Application
•
•
•
Data logging & mass storage in instruments (aviation, space vehicles and medicine)
Access control (security and cryptology)
Digital photography
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising