KeeTouch SAW Touch Panel User Guide

（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
7"-24" SAW Touch Panel
（the Standard Type）
）
User Guide
Rev2.0
KeeTouch SAW Sensor
KeeTouch Controller
Shenzhen K&JAD Technology Co., Ltd
www.keetouch.com
Dec. 2010
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Table of Contents
Part1.Technical Specification-------------------------------------------------------- 3
Part2.Features----------------------------------------------------------------------------- 3
Part3.Special Touchscreen Products---------------------------------------------- 4
Part 4. Accessories---------------------------------------------------------------------4
Part 5. Mechanical Drawings and connection sketch------------------------ 5
Part 6. integration process---------------------------------------------------------- 10
Part 7. Available Driver for Operation System-------------------------------- 10
Part 8. Product Warranty--------------------------------------------------------------13
Part 9, How to contact us ------------------------------------------------------------ 13
Page 2/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Part 1. Technical Specification
SAW touch screen panel technical specification
Technology
Surface Acoustic Wave(SAW)
Sizes
7” to 24” (extending)
Controller Interface USB and RS232
4096*4096 ,Z-axis 256, not related with the sizes of the touch screen
Resolution
panel
Material
Pure glass
Positional Accuracy Standard deviation of error is less than 0.080 in.(2mm)
Light Transmission
More than 90% per ASTM
Touch Activation
Force
30-60g
Durability
Scratch-free; More than 50,000,000 touches in one location without
failure.
Surface Hardness
Mohs' hardness rating of 7
Operating
Temperature
Touch
Panel
-20°C to +60°C
Storage Temperature
Touch
Panel
-40°C to +70°C
Humidity
10%-90% RH at 40°C, non-condensing
Operation Altitude
3800m
Accessories
Connector cables, double-sided glue, dust-proof stripes
Agency Approval
UL, CE, FCC, RoHS, CB
Controller technical specification
Sizes(PCB)
85mm*55mm*10mm
Working voltage
5
Working Current
80mA for 12V controller 70mA for 5V controller
Maximum Current
100mA for 12V controller 90mA for 5V controller
V±0.5V for KCA-UR01L-R1D or 12V±2V for KCA-UR01H-R1D
Operating
temperature
≤10ms
-10℃-70℃
Operating humidity
10%-90%RH.
Response time
Storage temperature -2
Multi-Point Touch
Drivers Available
Agency Approval
5℃-80℃
Intelligent discrimination by software
Windows 2000, Windows XP, Windows NT, Linux
UL, CE, FCC, RoHS , CB
Part 2. Features
Same driver for both USB and RS232 from 7” to 26”
High image clarity
Free of drift
Z-axis pressure recognition
Strong mechanical strength
Short response time
Compact size for easy integration
Page 3/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Customization available on glass sensor size, driver, accessories
Part 3. Special Touch screen Products
Vandal-Proof Touch screen(S series)
4mm,6mm tempered glass
Super impact-proof performance
Ideal solution for unsupervised applications
Standard sizes available: 7” to 22”
GB9963-1998
Anti-glare Touch screen(G series)
Sunlight readable
Human engineering technology: eye fatigue reduction
Ideal solution for outdoor applications with strong sunlight
Standard sizes available: 7” to 42”
Dust-proof Touch screen(P Series)
compliant with IEC IP6X standards
protect the reflective grating and transducers
from the dust and other objects
Excellent maintenance-free and durability
Sealed well with Alloy-aluminium frame
Applicable to the outdoor environment where in
unsupervised or industrial environments
Standard sizes available: 7” to 24”
Water-proof Touch screen(W series)
Latest technology and design
SAW with Alloy-aluminium Frame
Super-thin glass sensor
Easier integration
Free of maintenance
IP 65 Rated
Standard sizes available: 10”and17” (customization available)
Sealed well with Plastic frame or Alloy-Aluminium Frame
Remark: combined special functions are available
Part 4. Accessories
SAW Touch screen Controllers
Has USB and RS232 dual interface
MTBF: more than 500,000 hours
EMI disturbing restrained
More stable, safer
Less power consumption
Connector Cables
Standard length: 1.8m (customization available)
RDL For R1D RS232 5V
RDH For R1D RS232 12V
Page 4/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
UDL For R1D USB 5V
UDH For R1D USB 12V
Double-sided adhesive double tapes
Various sizes available
Excellent glue performance
Dust-proof Stripes
Thickness: 1.5mm-8mm
Width: 3mm-8mm
Length: any length
Made of special material, excellent dust-proof performance, avoid signal loss
Part 5. Mechanical Drawings
5.1 : Mechanical Drawing of the SAW size from 7" to 24", please kindly read the
drawing as attachment.
5.2 Mechanical Drawing of Controller and cable
5.2.1
Controller model: KCA-UR01L-R1D
Technical specification: dual interface of USB/RS232; work on 5VDC which get from USB
port and do not need another 5VDC power supplier;
（1）Controller cable model: UDL
work with controller model KCA-UR01L-R1D
Page 5/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
P1
1
2
3
4
5
P2
1&2
4
5
12
3
6
7
8
9
10
11
P3
colour
+5VDC red
D- white
D+ green
1
GND black
GND
AL
PVC white
PVC Black
naked copram
PVC red
PVC green
A-A
Connection of SAW touch component regarding controller model KCA-UR01L-R1D and cable model
UDL
Touch Glass Sensor
Controller
(2)Controller cable model: RDL
Work with controller model KCA-UR01L-R1D
Page 6/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
C-C
AL
PVC 9*33P
B-B
11*0.15 naked copram
6.5 PVC salmon pink
A-A
A-A
red +5VDC
green GND
VCC-power+5vDC
AL
PVC-33P black
PVC-33P red
7*0.16naked copram
3.0 PVC salmon pink
GND-GND
B-B
PVC-33P yellow
yellow CTS
orange RXD
white TXD
blue DSR
black DTR
brown RTS
green GND
CLK-clock
DATA-Key Data
n/c-not connected
n/c-not connected
PVC-33P brown
PVC-33P red
PVC-33P black
AL
PVC-33P green
PVC-33P orange
7*0.16 naked copram
4.5 PVC-60P salmon pink
C-C
Connection of SAW touch component regarding controller model KCA-UR01L-R1D and cable model
RDL
Touch Glass Sensor
Controller
5.2.2
Controller model: KCA-UR01H-R1D
Technical specification: dual interface of USB/RS232; work on 12VDC which get the
power from another 12VDC power supplier;
Page 7/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
(1)Controller cable model: UDH
work with controller model KCA-UR01H-R1D
A-A
B-B
P1
1
2
3
4&5
P2
2
4
5
3
12
1
6
7
8
9
10
11
P3
P4
PVC white
colour&Function
+5VDC red
D- white
D+ green
2
1
1
PVC black
PVC red
PVC green
earthing 7*0.12
GND black
A-A
GND naked copper
+12VBus brown
AL
PVC-33P black
7*0.16naked copram
3.0 PVC salmon pink
PVC-33P red
B-B
Connection of SAW touch component regarding controller model KCA-UR01H-R1D and cable model
UDH
Page 8/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Touch Glass Sensor
Controller
(2)Controller cable model: RDH
work with controller model KCA-UR01H-R1D
B-B
A-A
A-A
red +12VDC
VCC-power+12vDC
green GND
GND-GND
yellow CTS
orange RXD
AL
PVC 9*33P
11*0.15 naked copram
6.5 PVC salmon pink
white TXD
blue DSR
black DTR
brown RTS
green GND
AL
PVC-33P black
7*0.16naked copram
3.0 PVC salmon pink
PVC-33P red
B-B
Connection of SAW touch component regarding controller model KCA-UR01H-R1D and cable model
RDH
Page 9/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Touch Glass Sensor
Controller
Remarks about the LED indicator lamp on the controller
On the condition of the driver installation correctly
After connecting the controller and the touch sensor, if the controller have been supplied power,
the LED indicator lamp would flash continuously for 10 times at the frequency of one time per
second.
After flashed 10 times, the LED indicator lamp will shine for 6 seconds and then turn off. It is a
process that the controller inspect the touch sensor.
Then the LED indicator lamp would flash at the frequency of 2 times per second, and now the
controller start working normally
On the condition of the controller working normally, the LED indicator lamp would flash at the
frequency of the touch sensor being touched.
On the condition of the controller working normally, if the LED indicator lamp would not flash when
the touch panel are touched, there may be some problems with the connecting cable, which result
in the controller can’t communicate with the computer.
If the LED indicator lamp keep shining after flashed 10 times, the possible reasons are following:
Touchscreen unconnected or not connected properly; Touchscreen damaged; Controller damaged
：
On the condition of the driver installation wrongly or the driver uninstalled
After the serial interface controller prepare working, the LED indicator lamp would still flash at the
frequency of the touch panel being touched, but the cursor would not move, and now you just
have to install the right driver.
After the USB interface controller prepare working, the LED indicator lamp would keep shining for
a second and then would flash at the frequency of one time per 2 seconds, and now you just have
to install the right driver.
Part 6. Integration process
Connect the cable to the computer
Page 10/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
Connect the controller to the touch sensor
Connect the controller to cable
Install the driver responding to the controller.
Remark The touch sensor should be integrated according to the above process, if not may result in the
touch sensor working abnormally
：
。
Part 7. Available Driver for Operation System
7.1 Windows 2000, CE,XP,Vista,Win7,etc.
7.2 Linux
Keetouch driver installation and calibration guide:
(1) driver installation guide:
double click the file of “Setup.exe” in the folder , the Windows will flip Dialog Box as follow:
：Install the RS232 driver, please chose the”KeeTouch,KCA RS232 Series,Serial”；Install
the USB driver, please chose the “KeeTouch, KCA USB Series, USB”；
Remark
After selecting the proper interface, click the Install button to start installing the driver as following.
Installation successfully as following:
Page 11/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
(2) Calibration guide
Click
at the right side in the down corner of the Desk-Top,then choose
：
“calibrate”in the pop-out of the
menu ,and choose the “RS232” or “USB” at the submenu, as follow
Windows will pop-out the calibration interface, then click “+” with finger one by one, as follow:
Page 12/13
（
）
SAW touchpanel, size from 7" to 24" the standard type User Guide (Rev2.0)
After clicking the “+” on by one, the calibration is completed.
Part 8. Product Warranty
SAW sensor for 5 years
Part 9.
SAW controller for 3 years
How to contact us
www.Keetouch.com
Add：1-4th Floor，Building 9
Luck-King Science & Industry Park
Gongyedong Road，Longhua
Baoan, Shenzhen 518109，P.R.China
Tel：+86-755-82599797
Fax：+86-755-82599968
Sales & Marketing：[email protected]
Technical Support：
：[email protected]
Page 13/13