RayTemp™ 3
RayTemp™ 3
infrared digital thermometer
fast surface temperature measurement
temperature range -60 to +500°C
0.1°C or 0.1°F resolution (switchable)
compact, lightweight & easy to use
laser assisted alignment
11:1 optic ratio & fixed emissivity of 0.97
order code
0.1 °C or 0.1°F
optional accessories
protective pouch
The RayTemp 3 infrared thermometer is compact, lightweight and easy to use. Simply aim, pull the trigger and display the temperature of
the item being measured, in addition the LCD will display the maximum temperature. The RayTemp 3 measures temperature over the range
of -60 to +500°C with an assured accuracy of ±2%/±2°C of reading in an ambient temperature of between +15°C and +25°C, with a
repeatability of ±1°C of reading.
The instrument incorporates a clear, easy to read, LCD display with low battery, laser and backlight indication, an auto power off facility that
turns the instrument off after 15 seconds, maximising battery life. The RayTemp 3 is ideal for measuring food temperatures, eliminating the
need to touch or contaminate the food you are measuring, avoiding the risk of cross-contamination. It can be used by anyone as there is no
need to focus or calibrate the instrument.
Each RayTemp 3 features a single push button, allowing the user to select °C or °F. The thermometer also incorporates laser assisted alignment
as standard, to assist in pin-pointing the area of measurement. The unit incorporates an 11:1 optic ratio (target distance/diameter ratio) and
a fixed emissivity of 0.97. An optional protective pouch is available.
temperature range
ambient temperature range
field of view
battery life
case dimensions
case material
RayTemp 3
-60 to +500°C (-25 to +575°F)
0.1°C or 0.1°F switchable (-9.9 to +199.9°C)
±2% of reading or ±2°C whichever is greater
+15 to +25°C
11:1 optics ratio
0.97 fixed
2 x MN2400 (AAA)
140 hours continuous use
custom LCD
39 x 72 x 175mm
ABS plastic
180 grams
warranty & guarantee
The above instrument carries a one-year warranty and guarantee against defects in components or workmanship. During this period, products
that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This warranty does not apply to probes,
where a six-month period is offered. In line with our policy of continuous development, we reserve the right to amend our product specification
without prior notice.
These instruments comply with the EMC Directives
EN 50081-1 : 1992, EN 50082-1: 1992
for more information
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF