Geberit AquaClean 4000 Toilet User manual

Below you will find brief information for Toilet AquaClean 4000. The AquaClean 4000 is an enhancement solution which reclaims the source of freshness and cleanliness: water. A single water jet cleans your bottom with a pleasant and gentle feel. Application is simple yet effective. Toilet paper or a towel can be used for drying.

PDF Download
Document
Geberit AquaClean 4000 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Water jet cleaning
  • Adjustable spray intensity
  • Automatic nozzle cleaning
  • Integrated water heater
  • Easy to clean and maintain
  • Soft-close seat and lid
  • Energy-saving economy mode

Frequently asked questions

Simply sit on the toilet and press the shower button. The shower will start automatically and stop after 20 seconds. You can adjust the spray intensity to your preference using the + and - buttons. After use, you can start the toilet flush as usual by pressing the flush plate on the cistern.

To clean the spray nozzle, submerge it in standard limescale remover for a few hours. Press the + and - buttons at the same time to extend the spray arm and carefully remove the spray nozzle. After cleaning, reattach the nozzle to the arm and press the + and - buttons again to retract the arm.

You should use a mild washing-up liquid that is kind to the skin and a non-scratching sponge for regular cleaning. Avoid using abrasive cleaners or scouring agents. Also, do not use cleaners containing solvent, acid, limescale removers, vinegar, or cleaning agents containing acetic acid.
ALP:
Preparing document for printing…
0%