Invotech Signage Professional LED Video Monitor User's Manual
Below you will find brief information for Professional LED Video Monitor. The monitor features wide viewing angles, LED Backlight Technology, a super slim profile, plug and play media player, and is 24/7 compatible. It allows for portrait or landscape orientation and includes an ambient light sensor. You can control the display through an integrated speaker system and a serial remote control. A 1080p high definition display is perfect for a variety of setups, from video walls to retail environments.
advertisement
Professional LED Video Monitor
User’s Manual
Manual Version MP2.0
Professional LED Video Monitor User’s Manual
Our Full Product Range
Page 1
Professional LED Video Monitor User’s Manual
Safety Instructions
Please keep the display away from any heat sources such as electric radiators or direct sunlight. Place the display in a stable and well-ventilated place.
Please handle with care so as to not damage the LCD panel.
The holes or openings on the display are designed for ventilation. Do not cover or block the ventilation holes or openings with any objects.
Remove protective covering from the screen before you use the display.
As the display surface is vulnerable to scratches, avoid touching the surface with sharp pen point.
Shut off the power supply before cleaning. Use a soft lint-free cloth instead of a tissue to wipe the screen.
You may use a glass cleaner to clean the product as required. However, never spray the cleaner directly onto the display surface.
Do not attempt to repair this product yourself! Improperly disassembly of the product may invalidate the warranty and lead to possible danger!
If you have a problem that cannot be solved using the "Troubleshooting" guidelines, please contact your supplier.
Page 2
Professional LED Video Monitor User’s Manual
Quick Start Guide (connecting to PC)
This section of the guide is to allow rapid set up and use of the unit. Please refer to the main part of the User Guide for full information on use of the unit.
Please follow the steps detailed below:
1. Unpack unit and place in desired location along with PC.
2. Connect the screen to the PC via the VGA Cable (as shown below).
Figure 1 Screen to PC Connections
3. Power ON the PC.
4. Take the power lead from the accessories bag, insert the lead into the screen and connect to mains outlet. Then turn ON by the “AC Switch” located next to the power input.
5. If the screen does not display the signal from the PC then connect press the “SOURCE” button on the remote control and navigate to “PC-RGB” and press “PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
DVI
HDMI
AV1
AV2
DMP
Page 3
Professional LED Video Monitor User’s Manual
6.
Contents:
1.
Introduction ................................................................................................................................ 6
1.1
Box Contents ................................................................................................................... 6
1.2
Product Overview ............................................................................................................ 6
1.3
1.4
Remote Control ............................................................................................................... 7
Replacing the Remote Control Battery ........................................................................... 8
2.
Menu Operation ......................................................................................................................... 9
2.1
Inputs ............................................................................................................................ 12
3.
Set Up ........................................................................................................................................ 13
3.1
3.2
Ventilation ..................................................................................................................... 13
Connecting to PC ........................................................................................................... 14
3.3
3.4
3.4.1
Video Wall setup ........................................................................................................... 17
Internal Media Player .................................................................................................... 19
Usage ...................................................................................................................... 19
3.4.2
Supported Media Formats ..................................................................................... 20
4.
F.A.Qs and Troubleshooting Guide ........................................................................................... 21
4.1
4.1.1
My Video Monitor is not displaying what is on my PC ................................................. 21
Input Source ........................................................................................................... 21
4.2
4.1.2
Display/monitor button on PC keyboard ............................................................... 21
My display goes into standby mode ............................................................................. 22
4.2.1
Power saving function ............................................................................................ 22
4.3
4.4
4.5
What are my monitor’s refresh rates? .......................................................................... 23
How do I use my monitor as part of a video wall? ........................................................ 24
My monitor's image is unstable, unfocused or swimming ........................................... 25
Table of Figures
Page 4
Professional LED Video Monitor User’s Manual
Page 5
Professional LED Video Monitor User’s Manual
1. Introduction
Congratulations on your purchase of our product. Please read carefully and follow all instructions in the manual before first use.
The product should not be exposed to liquids dripping or splashing and no objects filled with liquids, such as vases, should be placed on the product.
For user convenience, a number of operations can be performed through the remote control.
Attention:
1. Do not change any default setting when it is unnecessary.
2. Keep the product far away from water during installation and use.
1.1 Box Contents
1xProfessional LED Video Monitor
1xPower Cable
1xRemote Control (with AAA batteries)
1xCD (User Manual)
IMPORTANT: Please retain your screen’s packaging for the duration of your warranty.
1.2 Product Overview
Figure 2 Product Overview
Page 6
Professional LED Video Monitor User’s Manual
1.3 Remote Control
Page 7
Professional LED Video Monitor User’s Manual
1.4 Replacing the Remote Control Battery
1. Slide the battery cover off, as shown below.
2. Remove the used batteries.
4. Insert the two new AAA batteries with their terminals corresponding to the indicators.
5. Put the cover back on.
Page 8
Professional LED Video Monitor User’s Manual
2. Menu Operation
The Menu includes the following menus: Picture, Sound, Time and Option.
Press “MENU” to bring up the menus, press ←→ to select the desired menu and ↑↓ to select the desired item, press “PLAY” to confirm selection. Press “menu” at any time to go back or exit.
Picture
Here is where you can edit settings such as brightness, contrast, colour temperature and backlight brightness. Any settings that you change can be reset back to default at any time.
Picture Mode <Standard>
User or Mild/User/Auto/Dynamic
Contrast
Brightness
50
50
<Medium>
Colour
Sharpness
50
50
Tint 50 or Warm/User/Cool Color Temperature
Aspect Ratio
Noise Reduction
PC Setup
Backlight <100> or 1-100
Page 9
Professional LED Video Monitor User’s Manual
Sound
In this menu you can adjust all of the sound settings for your monitor such as the sound mode EQ settings or the left/right balance. Any settings that you change can be reset back to default at any time.
Sound Mode
Balance
Auto Volume
<Standard>
<0>
<Off> or Music/Movie/Sports/User
-50(left) to +50(right) or On
Surround Sound
EQ
<Off>
120 Hz
500 Hz
1.5K Hz
5K Hz
10K Hz or Surround
50
50
50
50
50
Time
Here you can set a time and date for your screen as well as scheduling daily on/off times for the built in power timer. You can also adjust at what temperature the internal fans become active.
Clock <DATE and TIME> Date
Month
Year
Off Time <Off>
Hour
Minute
Hour
Minute
On Time
Temperature
Fan Active
<Off>
XX
<30>
Hour
Minute
(Current screen temperature)
(Temperature when internal fans become active)
Page 10
Professional LED Video Monitor User’s Manual
Option
Under this menu are settings like on screen display language, on screen display duration time, and the video wall tiling settings. You can also restore all of the menus default settings and lock your screen so as you have to enter a password to access any of the menus.
OSD Language <English> or Franais/Espanol/
Poruguês/Arabic/中文
Restore Default Setting
Blending
OSD Duration
Multi Setup
(Resets menu settings to default)
<Low>
<Off>
Board ID
Current X
Current Y
Total X or Middle/High/Off or 5sec/10sec/15sec
1
1
1
1
Multi Crop
Total Y
Left Edge
Up Edge
Right Edge
Down Edge
1
0
0
0
0
Copy Start
Lock System <Off> or On (Password – 1842)
Page 11
Professional LED Video Monitor User’s Manual
Switching between inputs
One crucial feature that does not appear on the Main Menu is selecting the input source. This is done by first pressing “SOURCE” and then scrolling down to the desired input source and select by pressing “PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
DVI
HDMI
AV1
AV2
DMP
2.1 Inputs
VGA (PC-RGB) – Video Graphics Array Signal Input
HDMI – High Definition Multimedia Interface Signal Input
DVI – Digital Video Interface
YPbPr – Component Signal Input
Video In (AV) – Composite Signal Input (X2)
BNC – Bayonet-Neill-Concelman
RS232 – Serial communication transmission
USB (DMP) – Universal Serial Bus (for internal media player)
Figure 3 Screen Inputs
Page 12
Professional LED Video Monitor User’s Manual
3. Set Up
3.1 Ventilation
If you are mounting your monitor in an enclosed space or recessed area please leave adequate room between the monitor and the enclosure to allow heat to disperse. We recommend the following the following space for ventilation.
Figure 4 Ventilation Area
If you are using your monitor as part of a video wall or you are mounting them next to one another please compensate for this by allowing more ventilation area at the rear of the screens.
Page 13
Professional LED Video Monitor User’s Manual
3.2 Connecting to PC
The Video Monitor must be connected to the PC via a visual signal input. The recommended visual connection is via a VGA Cable meaning that the display acts like a monitor for the PC – displaying whatever contents is on the PC.
Figure 5 Screen to PC Connections
Connect the screen to the PC via the VGA cable (as shown above). Once this connection has been made and the PC is powered ON take the power lead and insert it into the screen and connect to mains outlet. Then turn ON by the “AC Switch” located next to the power input.
Page 14
Professional LED Video Monitor User’s Manual
Before taking any more steps ensure that the screen is sourcing its display from the PC. This is done by first pressing “SOURCE” and then navigating to the desired input source (PC-RGB) and select by pressing “PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
DVI
HDMI
AV1
AV2
DMP
IMPORTANT: If the Video Monitor is the only monitor connected to your PC NO NOT take the following step. Only proceed with the following if you are using a laptop or another monitor is connected to your PC.
Access the display options from your Control Panel or right-click on your Desktop and choose
“Properties” (then “Settings”) or “Screen resolution”. You should now click “Detect” to allow the
PC to discover the Video Monitor then “Identify” to establish which display is the Video Monitor.
Page 15
Professional LED Video Monitor User’s Manual
Select the display that corresponds with the Video Monitor display then check the box “Make this my main display” or “Use this devise as the primary monitor”. This will make the Video Monitor display your main monitor.
Page 16
Professional LED Video Monitor User’s Manual
3.3 Video Wall setup
If you want to use your screen as part of a video wall you must give Multi Setup values settings in the “Option” menu. The following is an example of a 3x3 video wall:
BOARD ID
CURRENT X
1
1
CURRENT Y
TOTAL X
TOTAL Y
1
3
3
BOARD ID
CURRENT X
1
2
CURRENT Y
TOTAL X
1
3
TOTAL Y 3
BOARD ID
CURRENT X
CURRENT Y
TOTAL X
TOTAL Y
1
3
1
3
3
Page 17
Professional LED Video Monitor User’s Manual
BOARD ID
CURRENT X
CURRENT Y
TOTAL X
TOTAL Y
1
1
2
3
3
…and so on.
The “Multi Crop” settings are for fine calibration of a video wall. This setting is to eliminate any black edges that you may have. In most cases you should not need to use this function.
“LEFT EDGE” stretches the overall display horizontally from the left hand side.
“UP EDGE” stretches the overall display vertically from above.
“RIGHT EDGE” stretches the overall display horizontally from the right hand side.
“DOWN EDGE” stretches the overall display horizontally from below.
Note: This function is only available when the display is being used as part of a video wall.
Page 18
Professional LED Video Monitor User’s Manual
3.4 Internal Media Player
3.4.1 Usage
The monitor has a simple built in media player that runs directly from a USB stick. This allows you to display a series of images and videos in a continuous loop.
Begin by loading your image and video files directly onto the root drive (without any folders) of your USB stick in the order that you want them to be displayed. To find out what media formats are supported see section 2.3.2 Supported Media Files. Next, plug the USB stick into the USB port of the screen (see figure X).
Figure 6 USB Port Location
Your media files will now display in a continuous loop.
Page 19
Professional LED Video Monitor User’s Manual
3.4.2 Supported Media Formats
Media Type
Image
Video
Supported File Type
JPEG
MPG, AVI, MP4
Basline
MPEG-1, MPEG-2, MPEG-4, Xvid, DivX, H264
1. This unit does NOT support WMV or FLV video file types.
2. This unit does NOT support Sony ATRAC3, DTS or Dobly HD audio file types.
Note: Video and image files should be a maximum 1920x1080 resolution (16:9 aspect ratio).
Page 20
Professional LED Video Monitor User’s Manual
4. F.A.Qs and Troubleshooting Guide
4.1 My Video Monitor is not displaying what is on my PC
4.1.1 Input Source
Your monitor may be sourcing its display from another input. First ensure that your screen is connected to your PC (or other video source) via one of the inputs. Next, press “SOURCE” and then navigate to the input source that corresponds with the one you are using and select by pressing
“PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
DVI
HDMI
AV1
AV2
DMP
4.1.2 Display/monitor button on PC keyboard
If you are souring your video signal from a PC your keyboard may have a display/monitor button on it, especially if you are using a laptop. If your Video Monitor does not display the content of the PC try hitting this button before contacting your supplier.
Page 21
Professional LED Video Monitor User’s Manual
4.2 My display goes into standby mode
4.2.1 Power saving function
DVI
HDMI
AV1
AV2
DMP
If your Video Monitor is powered ON without being connected to a PC via a visual signal (e.g. VGA,
DVI etc.) it will automatically go into standby mode within a few minutes. If your Video Monitor is not being supplied with a video signal it will go to standby to ensure that video signal connection is connected properly. Also you must ensure that the Video Monitor is accessing the correct input. To do this you must press “SOURCE” and then navigate to the input source that corresponds with the one you are using and select by pressing “PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
Page 22
Professional LED Video Monitor User’s Manual
4.3 What are my monitor’s refresh rates?
If you are running you signal from your PC then some video cards with a pixel clock over 162MHz may not display the image correctly. Normally however your monitor will display the image correctly by adjusting the factory preset timing signal automatically.
Resolution Scanning frequency
680 x 480
800 x 600
1024 x768
1280 x 768
1360 x 768
Horizontal
31.5 kHz
37.9 kHz
48.4 kHz
48 kHz
48 kHz
Vertical
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
1280 x 1024
1600 x 1200
64 kHz
75 kHz
60 Hz
60 Hz
1920 x 1080 67.5 kHz 60 Hz
IMPORTANT: If you are using with a Macintosh PowerBook, set “Mirroring” to Off on your
PowerBook. Refer to your Macintosh’s owner’s manual for more information about your computer’s video output requirements and any special identification or configuration your monitor’s image and monitor may require.
Page 23
Professional LED Video Monitor User’s Manual
4.4 How do I use my monitor as part of a video wall?
If you want to use your screen as part of a video wall you must give Multi Setup values settings in the “Option” menu. The following is an example of a 3x3 video wall:
BOARD ID
CURRENT X
1
1
CURRENT Y
TOTAL X
TOTAL Y
1
3
3
BOARD ID
CURRENT X
1
2
CURRENT Y
TOTAL X
1
3
TOTAL Y 3
BOARD ID
CURRENT X
CURRENT Y
TOTAL X
TOTAL Y
1
3
1
3
3
Page 24
Professional LED Video Monitor User’s Manual
BOARD ID
CURRENT X
CURRENT Y
TOTAL X
TOTAL Y
1
1
2
3
3
…and so on.
The “Multi Crop” settings are for fine calibration of a video wall. This setting is to eliminate any black edges that you may have. In most cases you should not need to use this function.
“LEFT EDGE” stretches the overall display horizontally from the left hand side.
“UP EDGE” stretches the overall display vertically from above.
“RIGHT EDGE” stretches the overall display horizontally from the right hand side.
“DOWN EDGE” stretches the overall display horizontally from below.
Note: This function is only available when the display is being used as part of a video wall.
4.5 My monitor's image is unstable, unfocused or swimming
Firstly check that the video signal cable should is firmly connected to the monitor and the PC. Next, check the monitor and your display card with respect to compatibility and recommended signal timings.
If your text is blurred, reformat the video mode to “non-interlaced” and use 60Hz refresh rate.
Page 25
advertisement
Key Features
- Wide viewing angles
- LED Backlight Technology
- Super slim profile
- Plug and play media player
- Portrait or landscape orientation
- Ambient light sensor
- Integrated speakers
- Serial remote control
- 1080p high definition display
- 24/7 compatibility
Frequently Answers and Questions
My Video Monitor is not displaying what is on my PC
My display goes into standby mode
How do I use my monitor as part of a video wall?
Related manuals
advertisement
