Samsung MM-E460D DVD Micro Component System User manual

MM-E460D
DVD MICRO COMPONENT SYSTEM
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION : TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
WARNING
1 To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates important
instructions accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CAUTION
1 Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on
the apparatus.
1 The Mains plug is used as a disconnect device and shall stay
readily operable at any time.
1 This apparatus shall always be connected to a AC outlet with
a protective grounding connection.
1 To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug
shall be readily operable.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
1 INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug
to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code: BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND
YELLOW.
2
English
Safety Information
License
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
1 Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
Be especially careful not to scratch discs when
handling them.
Holding discs
1 Do not touch the playback side of the disc.
1 Hold the disc by the edges so that
fingerprints will not get on the surface.
1 Do not stick paper or tape on the disc.
Disc Storage
1 Do not keep in direct sunlight
1 Keep in a cool ventilated area
1 Keep in a clean Protection jacket.
Store vertically.
✎ NOTE


Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Copyright
Handling and Storing Discs
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
1 When cleaning, wipe gently from the inside to the
outside of the disc
✎ NOTE

1 ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX,LLC,a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX videos.
1 ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information on how to complete
your registration.
1 DivX Certified® to play DivX® video .
1 DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
1 Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274.
1 HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
1 This item incorporates copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
1 iPod,iPod classic,iPod nano and iPod touch are
trademark of Apple Inc., registered in the U.S. and
other countries.
Condensation may form if warm air comes into contact with
cold parts inside the product. When condensation forms inside
the product, it may not operate correctly. If this occurs, remove
the disc and let the product stand for 1 or 2 hours with the
power on.
Copy Protection
1 Many DVD discs are encoded with copy protection. Because of this, you
should only connect your product directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
1 This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
Accessories
Check for the supplied accessories below.
FUNCTION
SOUND
DISC SKIP
EQ
DVD
1
2
DISC MENU
TITLE MENU
4
3
5
6
SYNC
8
7
9
VOL
VOL
0
RDS PTY
RDS DISPLAY
REPEAT
HOME
USB REC
TUNING
TOOLS
INFO
EXIT
RETURN
DISPLAY
A
CD REC
MO/ST TUNING
B
TIMER
SPEED ON/OFF
Video Cable
FM/DAB Antenna
User's Manual
C
TIMER
D
SLEEP
CLOCK
Remote Control/
Batteries(optional)
Scart Adapter
(Europe only)
English
3
Contents
SAFETY INFORMATION
2
3
3
3
3
3
Safety Warnings
Accessories
Cautions on Handling and Storing Discs
License
Copyright
Copy Protection
GETTING STARTED
5
5
6
9
9
9
10
11
Precautions
Icons that will be used in manual
Disc Types and Characteristics
Description
Front Panel
Top Panel
Rear Panel
Remote control
CONNECTIONS
12
13
13
14
Connecting the Speakers
Connecting Audio from External Components
Connecting the FM/DAB Antenna
Connecting the Video Out to your TV
SETUP
16
16
17
17
17
17
17
18
18
18
18
18
18
19
19
19
19
19
19
19
19
19
19
Before Starting (Initial Setting)
Setting the Setup menu
Display
TV Aspect
BD Wise
Resolution
Video Out Signal
HDMI Format
Audio
DRC (Dynamic Range Compression)
AUDIO-SYNC
Speaker Selection
Audio Return Ch.
System
Initial Setting
DivX(R) Registration
DivX(R) Deactivation
Language
Security
Parental Rating
Change Password
Support
Product Information
BASIC FUNCTIONS
20
20
21
21
26
26
26
27
28
28
30
30
31
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Sound Mode
Mute Function
Display Function
Listening to Radio
Listening to DAB
About RDS broadcasting(optional)
Setting the Clock
Timer Function
Sleep Timer Function
2
5
12
16
20
4
English
Using Bluetooth
USB Function
Using an iPod/iPhone
Recording Function
OTHER INFORMATION
37
38
39
Troubleshooting
Language code list
Specifications
32
37
Getting Started
32
34
34
36
01
ADVANCED FUNCTIONS
Getting Started
Precautions
Icons that will be used in manual
Make sure to check the following terms before
reading the user manual.
Icon
Term
Definition
d
DVD
This involves a function available
with DVD-Video or DVD±R/±RW
discs that have been recorded
and finalised in Video Mode.
B
CD
This involves a function available
with a data CD (CD-DA,
CD-R/-RW).
A
MP3
This involves a function available
with CD-R/-RW discs.
G
JPEG
This involves a function available
with CD-R/-RW discs.
D
DivX
This involves a function available
with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
!
CAUTION
This involves a case where a function
does not operate or settings may be
canceled.
✎
NOTE
This involves tips or instructions on
the page that help each function
operate.
1 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
1 An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
1 The amount of such administration charge will be advised to you before any work or home visit is carried
out.
English
5
ENGLISH
t &OTVSFUIBUUIF"$QPXFSTVQQMZJOZPVSIPVTFDPNQMJFTXJUI
UIFJEFOUJmDBUJPOTUJDLFSMPDBUFEPOUIFCBDLPGZPVSQSPEVDU
t *OTUBMMZPVSQSPEVDUIPSJ[POUBMMZPOBTVJUBCMFCBTFGVSOJUVSF
XJUIFOPVHITQBDFBSPVOEJUGPSWFOUJMBUJPO_DN
t %POPUQMBDFUIFQSPEVDUPOBNQMJmFSTPSPUIFSFRVJQNFOUXIJDI
NBZCFDPNFIPU.BLFTVSFUIFWFOUJMBUJPOTMPUTBSFOPUDPWFSFE
t %POPUTUBDLBOZUIJOHPOUPQPGUIFQSPEVDU
t #FGPSFNPWJOHUIFQSPEVDUFOTVSFUIF%JTD*OTFSU)PMFJTFNQUZ
t *O PSEFS UP EJTDPOOFDU UIF QSPEVDU DPNQMFUFMZ GSPN UIF
QPXFS TVQQMZ SFNPWF UIF "$ QMVH GSPN UIF XBMM PVUMFU
FTQFDJBMMZXIFOMFGUVOVTFEGPSBMPOHQFSJPEPGUJNF
t %VSJOHUIVOEFSTUPSNTEJTDPOOFDUUIF"$QMVHGSPNUIFXBMM
PVUMFU7PMUBHFQFBLTEVFUPMJHIUOJOHDPVMEEBNBHFUIF
QSPEVDU
t %POPUFYQPTFUIFQSPEVDUUPEJSFDUTVOMJHIUPSPUIFSIFBU
TPVSDFT5IJTDPVMEMFBEUPPWFSIFBUJOHBOENBMGVODUJPOPG
UIFQSPEVDU
t 1SPUFDU UIF QSPEVDU GSPN NPJTUVSF BOE FYDFTT IFBU PS
FRVJQNFOUDSFBUJOHTUSPOHNBHOFUJDPSFMFDUSJDGJFMETJF
TQFBLFST
t %JTDPOOFDU UIF QPXFS DBCMF GSPN UIF "$ TVQQMZ JG UIF
QSPEVDU NBMGVODUJPOT :PVS QSPEVDU JT OPU JOUFOEFE GPS
JOEVTUSJBMVTF
t 6TFPGUIJTQSPEVDUJTGPSQFSTPOBMVTFPOMZ
t $POEFOTBUJPONBZPDDVSJGZPVSQSPEVDUPSEJTDIBTCFFO
TUPSFE JO DPME UFNQFSBUVSFT *G USBOTQPSUJOH UIF QSPEVDU
EVSJOH UIF XJOUFS XBJU BQQSPYJNBUFMZ IPVST VOUJM UIF
QSPEVDUIBTSFBDIFESPPNUFNQFSBUVSFCFGPSFVTJOH
t 5IFCBUUFSJFTVTFEXJUIUIJTQSPEVDUDPOUBJODIFNJDBMT
UIBUBSFIBSNGVMUPUIFFOWJSPONFOU%POPUEJTQPTFPG
CBUUFSJFTJOUIFHFOFSBMIPVTFIPMEUSBTI
t .BJOUBJOBOPQFOTQBDFPGBQQSPYJNBUFMZJODIFTDN
POUIFTJEFTBOESFBSPGUIFTZTUFNGPSWFOUJMBUJPOQVSQPTFT
t 1MBDFUIFMPVETQFBLFSTBUBSFBTPOBCMFEJTUBODFPOFJUIFS
TJEFPGUIFTZTUFNUPFOTVSFHPPETUFSFPTPVOE
t %JSFDUUIFMPVETQFBLFSTUPXBSETUIFMJTUFOJOHBSFB
Getting Started
Disc Types and Characteristics
Disc types that can be played
Disc Types &
Mark (Logo)
Region Code
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
Disc Type
DVD-VIDEO
Region
Code
Area
Recorded
Signals
Disc
Size
Max. Playing Time
Approx. 240 min.
(single-sided)
VIDEO
12 cm
AUDIO
12 cm
74 min.
12 cm
-
DVD-VIDEO
1
2
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
AUDIO
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
VIDEO
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
Approx. 480 min.
(double-sided)
AUDIO-CD
+
Do not use the following types of disc!
1 LD, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
1 DVD discs purchased abroad may not play on this
product.
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
1 Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
1 Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
1 Some CD-RW (Rewritable) media, may not be playable.
1 Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
6
English
01
1 Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
1 MP3 file names should contain no blank spaces
or special characters (. / = +).
1 Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
1 Only files with the ".mp3" and ".MP3" extensions
can be played.
1 Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
1 If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may be played.
1 For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
1 A maximum of 999 tracks can be played per CD.
1 A maximum of 250 folders can be played per CD.
CD-R JPEG Discs
1 Only files with the "jpg" extensions can be played.
1 If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be played.
1 Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
1 JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
1 Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
1 A maximum of 999 images can be stored on a folder.
1 When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
1 Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
DVD±R/±RW, CD-R/RW Discs
Getting Started
CD-R MP3 Discs
1 If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
DivX (Digital internet video express)
DivX® is a video file format developed by DivX, Inc and
is based on MPEG4 compression technology to
provide audio and video data over the Internet in
real-time.
MPEG4 is used for video encoding and MP3 for audio
encoding, enabling to watch a movie at near
DVD-quality video and audio.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
AVI
WMV
Supported Versions
DivX3.11~DivX5.1
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
MP3
80~320kbps
WMA
56~128kbps
AC3
128~384kbps
Sampling
Frequency
44.1khz
44.1/48khz
1 Aspect Ratio : This product supports up to 720x576
pixels. TV screen resolutions higher than 800 will not
be supported.
1 When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
1 Sections with a high frame rate might not be played
while playing a DivX file.
1 Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
1 Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolution higher than
800 x 600 pixels, etc.)
English
7
Getting Started
USB Host Specification
USB Host Specification
t4VQQPSUT64#PS64#DPNQMJBOUEFWJDFT
t4VQQPSUTEFWJDFTDPOOFDUFEVTJOHUIF64#"UZQF
cable.
t4VQQPSUT6.464#.BTT4UPSBHF%FWJDF
7
compliant devices.
t4VQQPSUTUIFEFWJDFPGXIJDIUIFDPOOFDUFEESJWFJT
formatted in the FAT (FAT, FAT16, FAT32) file system.
Non-compliance
t%PFTOPUTVQQPSUBEFWJDFUIBUSFRVJSFTJOTUBMMJOHB
separate driver on the PC (Windows).
t%PFTOPUTVQQPSUDPOOFDUJPOUPB64#IVC
t"64#EFWJDFUIBUJTDPOOFDUFEVTJOHUIF64#
extension cable may not be recognized.
t"64#EFWJDFSFRVJSJOHBTFQBSBUFQPXFSTPVSDF
needs to be connected to the product with the
separate power connection.
Operational Limitations
t"EFWJDFTVQQPSUJOH64#BMPOFNBZDBVTFB
difference in the picture quality, depending on the
device.
USB Devices that can be used with the
product
1 USB Storage Device, MP3 Player
1 Removable HDD
- Removable HDDs equipped with less than 160
Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be
recognized, depending on the device.
- If the connected device does not work due to
insufficient power supply, you can use a
separate power cable to supply power so that it
can work properly. The connector of the USB
cable may differ, depending on the manufacturer
of the USB device.
1 USB card Reader: One slot USB card reader and
Multi slot USB card reader.
- The USB card reader may not be supported,
depending on the manufacturer.
- If you install multiple memory devices into a multi
card reader, you may experience problems.
8
English
Supported file Formats
Format
Still
Picture
File name
JPG
MP3
WMA
WMV
DivX
File
extension
JPG
.JPEG
.MP3
.WMA
.WMV
.AVI
Bit rate
–
80~320
kbps
56~128
kbps
4Mbps
4Mbps
Version
–
–
V8
V1,V2,
V3,V7
DivX3.11~
DivX5.1
Pixel
640x480
–
–
720x576
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
Music
Movie
1 CBI (Control/Bulk/Interrupt) is not supported.
1 Digital Cameras that use PTP protocol or require
additional program installation when connected to a
PC are not supported.
1 Some MP3 players, when connected to this product,
may not operate depending on the sector size of their
file system.
1 The USB host function is not supported if a product
that transfers media files by its manufacturer specific
program is connected.
1 Does not operate with Janus enabled MTP (Media
Transfer Protocol) devices.
1 The USB host function of this product does not
support all USB devices.
1 A certain USB, digital camera device, USB card
reader or Smart Phone may not be supported.
1 Russian symbols in filenames (MP3/JPEG/DivX)
are not supported.
01
Description
Getting Started
Front Panel
PHONE
5V 500mA
2
1
1. Disc Tray
2. Window Display
3. USB jack
3
4
4. Phone jack
tIf you plug the headset connector into the headset
jack of the main unit, no sound will be produced further
through the speakers.
Top Panel
1. Galaxy Dock
2. iPod Dock
3. POWER button
t 1SFTTUIJTCVUUPOUPTXJUDIZPVSQSPEVDU
GALAXY
4.
5.
6.
7.
8.
9.
10.
11.
Function button
Search/Skip button
STOP/Tuning Mode button
PLAY/PAUSE button
Search/Skip button
OPEN/CLOSE button
VOLUME control button
Galaxy button
VOLUME
1
2
3
4 5
6
7
8
9 10 11
USING THE TOUCH BUTTON
Tap on touch screen with your fingertip.
To avoid damage to the touch screen, do not use any object other than your fingers to operate it.
Do not tap on the touch screen if your fingers are not clean.
Do not tap on the touch screen with gloves on.
The touch screen may not function if you use your fingernail or other instrument such as a ballpoint pen.
English
9
Getting Started
Rear Panel
VIDEO OUT
SPEAKERS
OUT (4 )
HDMI
OUT
1
3
2
4
5 6
ONLY FOR
SERVICE
7
1
2.0 CHANNEL SPEAKER OUTPUT
CONNECTORS
Connect the speakers.
2
VIDEO OUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
3
FM/DAB JACK
Connect the FM/DAB antenna.
4
AUX IN JACK
Connect the Audio Out of the external analog component to the AUX IN jack.
5
COMPONENT VIDEO OUTPUT
JACKS
Connect a TV with Component video inputs to these jacks.
6
HDMI OUT JACK
Use an HDMI calbe,connect this HDMI output terminal to the HDMI input termianl
on your TV for the best quality picture.
7
ONLY FOR SERVICE
This jack is just for testing, please don't use it.
10
English
01
Remote control
Getting Started
Tour of the Remote Control
MUTE button
POWER button
SOUND
EQ button
DISC SKIP
SOUND button
DISC MENU button
FUNCTION button
FUNCTION
EQ
DVD
3
1
2
DISC MENU
TITLE MENU
4
5
DVD* button
Number(0~9) button
6
TITLE MENU button
SYNC
8
7
VOL - button
9
VOL
0
RDS PTY
SKIP button
SKIP, RDS PTY* button
STOP button
PLAY button
REPEAT button
HOME button
TOOLS button
SYNC* button
VOL + button
VOL
RDS DISPLAY
SEARCH button
SEARCH,RDS DISPLAY button
PAUSE button
REPEAT
HOME
USB REC
USB REC button
TUNING
button
TUNING
TOOLS
INFO
INFO button
CURSOR/ENTER button
RETURN button
DISPLAY, A button
MO/ST, B button
CD REC SPEED button
EXIT
RETURN
DISPLAY
A
CD REC
EXIT button
TUNING
button
D button
C button
SLEEP button
TIMER/CLOCK button
MO/ST TUNING
B
TIMER
SPEED ON/OFF
C
TIMER
D
SLEEP
CLOCK
TIMER ON/OFF button
* This product does not support the DISC SKIP/SYNC function with marked [ *].
* This product may not have the RDS function depending on your region.
Installing batteries in the Remote Control
✎ NOTE




* Battery size: AAA
Place batteries in the remote control so they match the
polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
The remote control can be used up to approximately 23
feet (7 meters) in a straight line.
English
11
Connections
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
VIDEO OUT
SPEAKERS
OUT (4 )
HDMI
OUT
Speaker (R)
ONLY FOR
SERVICE
Speaker (L)
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m)
For 55" TV's 11.5 ~ 13.1 feet (3.5~4 m)
Front Speakers
ei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
! CAUTION


Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
✎ NOTE

If you place a speaker near your TV set, screen color may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
12
English
02
Connecting Audio from External Components
Connections
VIDEO OUT
SPEAKERS
OUT (4 )
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
HDMI
OUT
ONLY FOR
SERVICE
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analog component.
1 Be sure to match the colors of the connecting jacks.
2. Press the FUNCTION button to select AUX input.
1 The mode switches as follows :
DVD/CD ➞ ARC ➞FM ➞DAB ➞ USB ➞ R.IPOD ➞ IPOD ➞ AUX ➞ BT/GAL.
✎ NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
Connecting the FM/DAB Antenna
FM/DAB ANT
PHONES
ONLY FOR SERVICE
AUX IN
SPEAKERS
OUT (4 )
FM/DAB Antenna
(supplied)
1. Connect the FM/DAB antenna to the DAB Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
✎ NOTE

This product does not receive AM broadcasts.
English
13
Connections
Connecting the Video Out to your TV
Choose one method for connecting to a TV.
VIDEO OUT
SPEAKERS
OUT (4 )
ONLY FOR
SERVICE
HDMI
OUT
METHOD 3
(supplied)
METHOD 4
(not supplied)
METHOD 1
(not supplied)
METHOD 2
(supplied)
VIDEO INPUT
COMPONENT IN
SCART IN
TV
METHOD 1 : Component Video(BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input
Jacks on your TV.
METHOD 2 : Scart (Europe only)
If your television is equipped with a SCART input, connect the supplied video cable from the VIDEO OUT jack on
the back of the product to the VIDEO jack on the Scart adapter (Europe only), then connect the SCART adapter's
jack to the SCART IN jack on your television.
METHOD 3 : Composite Video(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
METHOD 4 : HDMI(BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
✎ NOTE



Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 17 for the resolution setting.
This product operates in Interlace scan mode 480i(576i) for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video output mode on
your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for more information
on how to select the TV's Video Input source.
14
English
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
HDMI FUNCTION
HDMI Auto Detection Function
If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI
mode when connecting an HDMI cable while power is on.
1 HDMI (High Definition Multimedia Interface)
1 HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
1 HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears
on the screen.
1 What is the HDCP?
1 HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is
only available with SAMSUNG TV's that support Anynet+.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 14)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
✎ NOTE



The Anynet+ function supports some buttons of the remote control.

Please check the
This function is not available if an HDMI cable does not support CEC.
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user’s manual of your TV.
logo (If your TV has an
logo, then it supports Anynet+ function.)
Using ARC(Audio Return Channel)
ARC is feature that transfer audio from the TV back to the product and listen to your TV's audio through the
product instead of the TV's speakers without having to connect a second cable between the TV and other
audio system.
1. Connect the the product to a Samsung TV with an HDMI cable. (See page 14)
2. Press the F button to select ARC input.
t You can select ARC by pressing the FUNCTION button on the remote control and the product.
English
15
Connections

02
!
Setup
Before Starting (Initial Setting)
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Setting screen will be displayed.
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
1
Initial setting | On-Screen Language
Select a language for the on-screen displays.
English
3
Nederlands
Français
Deutsch
2
Italiano
Move
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
1
HOME BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
✎ NOTE



4
Select
To move to the previous screen, press and hold the
RED(A) button.
Once you selected a menu language, you can change it
by pressing the STOP () button on the front panel for
more than 5 seconds with no disc inserted.
When the Initial Setting screen does not appear, refer to
Initial Setting. (see page 19)
Settings
Function
DVD/CD
1. In NO DISC mode, or during playback, press
STOP button twice.
2. Press the ◄► buttons to select Settings, then
press the ENTER button.
3. Press the ▲▼ buttons to select desired menu,
then press the ENTER button.
4. Press the ▲▼ buttons to select desired
sub-menu, then press the ENTER button.
5. Press the ▲▼ buttons to select desired item,
then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
16
English
03
You can configure various display options such as
the TV Aspect.
✎ NOTE

TV Aspect

Depending on the type of television you have, you
may want to adjust the screen setting.

This will optimize the picture quality according to the
content (In the DVD disc, etc) that you want to play
and the product or your BD Wise-compliant
Samsung TV.
If you want to change the resolution in BD Wise
mode, you must set BD mode to Off in advance.
BD Wise will be disabled if the product is connected to
a device that does not support BD Wise.
Resolution
1 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
Sets the output resolution of the HDMI video signal.
The number in 480p(576p), 720p, 1080i and 1080p
indicates the number of lines of video.
The i and p indicate interlace and progressive scan,
respectively.
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
1 480p(576p) : Outputs 480 lines of progressive video.
1 720p : Outputs 720 lines of progressive video.
1 1080i : Outputs 1080 lines of interlaced video.
1 1080p: Outputs 1080 lines of progressive video.
1 BD Wise : Automatically sets the optimal
resolution when connected via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
appears only if BD Wise is set to On.)
You can view the full 16:9 picture on
your widescreen TV.
✎ NOTE
1 4:3 Letter Box
1 16:9 Wide


If Component or Composite is connected, the
resolution supports only 480i(576i).
1080P may not appear depending on TV.
✎ NOTE



If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
When using HDMI, the screen is automatically converted to the
16:9 Wide mode and TV Aspect is deactivated.
BD Wise
(Samsung products only)
BD Wise is Samsung's latest inter-connectivity
feature. When you connect Samsung products with
BD-Wise to each other via HDMI, the optimum
resolution will be set automatically.
1 On : The original resolution of the DVD disc will be
output to the TV direct.
1 Off : The output resolution will be fixed according
to the Resolution previously set, regardless of the
resolution of the disc.
Video Out Signal
Different countries apply different TV standard.You
can select from NTSC or PAL.
tNTSC : You can set to the NTSC video format
tPAL : You can set to the PAL video format
✎ NOTE

Depending on the type(NTSC or PAL) of main unit you have, the
TV screen displayed may be different.
English
17
Setup
Display
Setup
HDMI Format
You can optimize the color setting from the HDMI
output. Select a connected device Type.
1 Monitor : Select if connected to a Monitor via
HDMI.
1 TV : Select if connected to a TV via HDMI.
Audio
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
1 Audio System : Video is transmitted over the
HDMI connection cable only, and
audio is output through the
product speakers only.
1 TV Speaker : Both video and audio signals are
transmitted over the HDMI
connection cable, and audio is
output through your TV speakers
only.
NOTE
 The default setting of this function is Audio
System .
✎

HDMI Audio is automatically down-mixed to 2ch
for TV speakers.

When TV Selection is set to TV Speaker, EQ/
POWER BASS doesn't work.

With Speaker Selection set to 'TV Speaker', the
volume can be adjusted only using the TV remote
control.
Settings
Display
DRC
Audio
Audio Sync
System
Language
: 0 Full
: 506/8
mSec
4/8
Speaker Selection
Audio Return Ch.
2/8
Off
Security
Support
Audio Return Ch.
Move
Select
Return
1 You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video.
✎ NOTE

0 ms
Display
DRC
Audio
System
25 ms
: 50 mSec
50 ms
Speaker Selection
Language
:0
Audio Return Ch.
Audio Sync

75 ms
Security
100 ms
Support
125 ms
150 ms
175 ms
Move
Select
Return
1 You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable
can be changed Audio System/TV Speaker.
English
1 Off : Turn the Audio Return Channel function off.
1 Auto: Listen to TV sound from the speakers if your
TV is compatible with the Audio Return Channel
function.

Settings
18
You can enjoy TV sound from the speakers by using
just one HDMI cable.
When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
Using an ARC (Audio Return Channel)-uncertified
HDMI cable may cause a problem in compatibility.
ARC function is only available if an ARC-compliant
TV is connected.

The selected language will only appear if it is
supported on the disc.
Security
By using the Initial Setting, you can set language and
TV aspect setting.
NOTE
 If an HDMI cable is connected to the product, the TV aspect
does not appear and it is set to 16:9 Wide automatically.
✎
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
DivX(R) Registration
Parental Rating
View DivX(R) VOD Registration Code to purchase
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
and play DivX(R) VOD content.
NOTE
 This option is not activated if you select OK.To
activate this option, please activate the DivX(R)
Deactivation.
 Even after you reset the system, the settings of DivX
Registration will not be reset.
✎
DivX(R) Deactivation
Select this to get a new registration code.
Language
Enter the password and then press the ENTER button.
- The password is set to "0000" by default.
- Once the setup is complete, you will be taken to the previous screen.
Change Password
Select Change and enter the 4-digit password to set the
parental lock using the number buttons on the remote control.
Settings
You can select the language you prefer for
on-screen menu, disc menu, etc.
Display
Parental Rating
: Off
Audio
Password
: Change
System
Language
Settings
Security
Support
ISH
H
N
H
English
: ENGLISH
Display
OSD Language
Audio
Disc Menu
H
H
H
System
Audio
: ENGLISH
Chinese
Language
Subtitle
: ENGLISH
Dutch
N
Security
Move
Select
Return
Farsi
Support
N
Arabic
French
German
GUESE
Return
Move
OSD
Language
Disc Menu
Settings
ISH
H
N
H
Display
Audio
Audio
System
Select
Return
Select the language for the
on-screen displays.
Select the language for the disc
menu displays.
N
GUESE
Return
In "NO DISC" mode, press and hold the STOP ()
button on the front panel for 5 seconds or more.
All settings will revert to the factory settings.
Support
ENGLISH
: ENGLISH
SelectOSD
theLanguage
language
for disc audio.
KOREAN
Disc Menu
Audio
: ENGLISH
DUTCH
: ENGLISH
FRENCH
Language
Subtitle
SelectSubtitle
the language
for disc subtitles.
H
H
N
If you forgot your password
Security
GERMAN
Support
ITALIAN
POLISH
a To select another language, select
OTHERS of Disc
PORTUGUESE
Menu, Audio and Subtitle, and enter
the language
Move
Select
Return
code of your country (see
page 38).
a You cannot select OTHERS in the OSD Language menu.
Product Information
Provide contact information for assistance with your product.
English
19
Setup
Initial Setting
03
✎ NOTE
System
Basic Functions
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
1. Press the OPEN/CLOSE button.
BA
2. Place a disc gently into the disc Compartment
with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the
disc Compartment.
Track01
1/17
✎ NOTE





Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up where
you left off. (This function works only with DVDs.)
Press the STOP button twice during playback to
disable the Resume function.
If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will be changed to
Resume stop mode. and after another 5 minutes
in Resume stop mode, it will be changed to
screen saver mode.
The initial screen may appear different, depending
on the content of the disc.
Pirated discs will not run in this product because
it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
DTS Audio is not supported.
will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
1 If no button input is made for more than 5 minutes
in Stop or Play (music) mode, the screen saver will
be activated.
1 If the product is left in the screen saver mode for
more than 20 minutes, the power will
automatically turn off. (Except during play a music)
20
English
0:15 / 3:59
Function DVD/CD
Repeat Play Mode
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc Compartment.
1 For an Audio CD, the first track will be played
automatically.
- Press the #$ buttons to move to the
previous/next track.
1 For the MP3/WMA disc, press the ◄►
buttons to select Music, then press the
ENTER button.
- Press the ▲▼◄► buttons to select a
desired file and press the ENTER button.
- Press the  buttons to move to the
previous/next pages.
2. Press the STOP () button to stop playback.
✎ NOTE



Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
04
Using the Playback Function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
dBAD
1. Insert a JPEG disc on the disc Compartment.
2. Press the ◄,► buttons to select the Photos,
and then press the ENTER button.
Press the  buttons for Search Function.
3. Press the ▲▼ buttons to select the folder you
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
1 The selected file will play and slide show will
start.
1 To stop slide show, press the PAUSE ()
button.
1 You can view the previous/next file by
pressing the ◄,► buttons during the
slideshow mode.
../ PICTURES
JPEG 2
JPEG 3
642 X 352

No sound is played in search mode.
Skipping Scenes/Songs
dBAD
Slow Motion Play
2010/01/01
Pages
Return
Dd
Rotate Function
G
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
1 GREEN(B) Button: Rotate 90° Counter-clockwise.
1 YELLOW(C) Button: Rotate 90° Clockwise.
✎ NOTE

✎ NOTE
Press the #$ buttons.
1 Each time the button is pressed during playback,
the previous or next chapter, track or directory (file)
will be played.
JPEG 1
Function DVD/CD
1➞2➞3➞4
1➞2➞3➞4
Press the PAUSE () button and then press the 
button for Slow Motion play.
d
D
1 ➞2 ➞3
1 ➞2 ➞3
✎ NOTE


No sound is heard during slow playback.
Reverse slow playback does not work.
The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
English
21
Basic Functions
JPEG File Playback
Basic Functions
Step Motion Play
dD
1. During playback, press and hold the
TITLE MENU button on the remote
control.
1 The picture moves forward one frame
each time the button is pressed during
playback.
2. Press the ▲▼◄► buttons to make
the desired selection, then press the ENTER
button.
✎ NOTE
No sound is heard during step motion playback.
5 Minute Skip function
D
During playback, press the ◄,► button.
1 Playback skips 5 minutes forward whenever you
press the ► button.
1 Playback skips 5 minutes backward whenever you
press the ◄ button.
✎ NOTE

You can operate this function only on the DivX.
Using the Disc Menu
d
You can view the menus for the audio language,
subtitle language, profile, etc.
1. During playback, press and hold the
DISC MENU button on the remote
control.
2. Press the ▲▼◄► buttons to make
the desired selection, then press the ENTER
button.
✎ NOTE

Depending on the disc, menu setup items may
vary and this menu may not be available.
22
English
d
For DVDs containing multiple titles, you can view the
title of each movie.
Press the PAUSE button
repeatedly.

Using the Title Menu
✎ NOTE

Depending on the disc, menu setup items may
vary and this menu may not be available.
04
A-B Repeat Playback
dBAD
You can repeatedly play back a designated section
of a DVD or CD.
DVD/DivX Repeat
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
Repeat
dB
1. During the DVD disc or CD playback,
press the REPEAT button on the
remote control.
2. For DVD, press the ▲▼ buttons to
select A-.
For CD press the REPEAT button
repeatedly until
appears on the TV.
Off
3. Press the ENTER button at the point where you
want repeat play to start (A).
1. During the DVD/DivX playback, press the
REPEAT button on the remote control.
2. Press the ▲▼ buttons to select a desired repeat
mode, then press the ENTER button.
4. Press the ENTER button at the point where you
want repeat play to stop (B).
5. To return to normal playback,
For DVD, press the REPEAT button to select to
REPEAT OFF.
3. Press the ▲▼ buttons to select Off to return to
normal play, then press the ENTER button.
Z
D
For CD, press the REPEAT button to select to
.
✎ NOTE
Off ➞ Title ➞ Chapter ➞ A-

Off ➞ Title ➞ Folder ➞ All

The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.
For DVD, point B cannot be set until 5 seconds
of playback has elapsed from point A.
CD/MP3 Repeat
1. During the CD/ MP3 playback, press the
REPEAT button repeatedly to select the repeat
mode you want.
B
A
)
)
)
)
(Normal ) Repeat Track ) Repeat All )
Random ) Repeat Section A-B)
)
)
)
)
(Normal ) Repeat Track)
Repeat DIR ) Repeat All) Random)
English
23
Basic Functions
Repeat Playback
Basic Functions
Displaying Disc Information
d

3/4
1/1
0:00:21
1/2 KO

2/2 EN
1/1
Change
) : Most DVD discs are
recorded in chapters so that you can
quickly find a specific chapter.
Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
Audio(
): Refers to the film's
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
Subtitle(
): Refers to the subtitle
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
Angle(
): When a DVD contains
multiple angles of a particular scene, you
can use the Angle function.
 Chapter(
Select

D

2/3
1/2 KO
2/2 EN
Change
Selecting the Audio Language
1. During the playback, press the TOOLS button
on the remote control.
2. Press the ▲▼ buttons to select the desired
item.
3. Press the ◄► buttons to make the desired
setup change and then press the ENTER
button.
- You may use the number buttons of the
remote control to control some item.
4. To make Disc information disappear, press the
TOOLS button again.
✎ NOTE


If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
Some tools menu may differ depending on discs and files.
TOOLS menu
) : To access the desired title
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
 Title(
24
English
dD
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select AUDIO (
display.
3. Press the ◄► buttons to select the
desired audio language.
1 Depending on the number of
languages on a DVD disc, a
different audio language is
selected each time the button is pressed.
)
04
Angle Function
d
dD
1. Press the TOOLS button.
This function allows you to view the same scene in
different angles.
2. Press the ▲▼ buttons to select
SUBTITLE (
) display.
3. Press the ◄► buttons to select the
desired subtitle language.
1 Depending on the number of languages on a
DVD disc, a different subtitle language is
selected each time the button is pressed.

Depending on the disc, the Subtitle and Audio
Language functions may not be available.
On the DivX file format, the subtitle languages
may be represented by only numbers.
Caption Function
2. Press the ▲▼ buttons to select
ANGLE (
) display.
3. Press the ◄► buttons to select the
desired angle.
✎ NOTE
✎ NOTE

1. Press the TOOLS button.

The Angle function works only with discs on
which multiple angles have been recorded.
D
1 You must have some experience with video
extraction and editing in order to use this feature
properly.
1 To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
1 Up to 60 alphanumeric characters or 30 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
1 The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
English
25
Basic Functions
Selecting the Subtitle Language
Basic Functions
Sound Mode
Mute Function
EQ
This is useful when answering a doorbell or
telephone call.
Your micro-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of music
you are listening to.
1. Press MUTE button:


‘ MUTE ’ appears in the display.
To switch the sound back on, press the MUTE
button again or the VOL-, + button.
Press EQ on the remote control. Each time you
press EQ,the EQ model will switch in the following
order:
OFF! FLAT !RANCHA ! SAMBA ! CUMBIA !
HABANA ! BOOMBA!REGGAE ! PARTY !
POP ! HIPHOP! ROCK!JAZZ ! CLASS !
STA+EQ! DYN+S!MP3+ ! VIR+S .
✎ NOTE
Display Function

The equalizer is set to "OFF" automatically and
becomes not available during a CD recording.
You can view all functions available on the display,
adjust the brightness of the display.

This function is not available during playback of a
DVD disc.
1. Each time you press the DISPLAY button on
the remote control, the display mode will
change as following:
POWER BASS
Your micro-compact system has a bass
amplification function called Power Bass.This
function makes the sound more powerful and real.
1.
Press the SOUND button on the remote
control.
Result: “POWER BASS ON” is displayed.
2. To cancel this function, press this button
again, “POWER BASS OFF” is displayed for a
few seconds.
✎ NOTE

The Power Bass is set to "OFF" automatically
and becomes not available during a CD
recording.
26
English

The Demo function
All functions available on the system appear on the
front panel display.

The Dimmer function
The Dimmer function is selected and the display
darkens.
DISPLAY

Display ON
The Display turns on.

Clock ON
The Clock you set is displayed.
A
04
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
1 Preset Tuning : Press the STOP button to
select FMXX and then press TUNING ,,.
buttons to select the preset station.
1 Automatic Tuning : Press the STOP button
to select MANUAL and then press and hold
the TUNING,,. button to automatically
search for active broadcasting stations.
1 Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
TUNING,,. button to increase or decrease
the frequency.
Using buttons on the product
1. Press the F button to select FM.
2. Select a broadcast station.
1 Preset Tuning : Press the STOP (  ) button
to select FMXX and then press the
# $ buttons to select the preset station.
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP (  ) button on the top panel to
select <MANUAL> mode.
3. Press the # $ button on the top panel to
select <89.10>.
4. Press the ENTER button.
1 Number flashes on the display.
5. Press the # $ buttons on the top panel to
select preset number.
1 You can select between 1 and 15 presets.
6. Press the ENTER button again.
1 Press the ENTER button before number
disappears from the display.
1 Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
1 To tune to a preset station, press the # $ on
the top panel to select a channel.
NOTE
✎

You can also use TUNING,,. buttons on the remote
control instead of # or $ buttons in step 3,5,7 .
1 Automatic Tuning : Press the STOP (  )
button to select MANUAL and then press and
hold the # $ buttons to automatically
search the band.
1 Manual Tuning : Press the STOP (  ) button
to select MANUAL and then press the # $
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
MO/ST
1 Each time the button is pressed, the
sound switches between STEREO and
MONO.
1 In a poor reception area, select MONO for a clear,
interference-free broadcast.
✎ NOTE

This applies only when listening to an FM
station.
English
27
Basic Functions
Presetting Stations
Listening to Radio
Basic Functions
Listening to DAB
Using buttons on the Remote Control
1.
Press the FUNCTION button to select DAB.
2.
Tune in to the desired station.
1 Store Tuning : Press the ENTER button to select
STORE-X and then press TUNING ,,. buttons to
select the service number.
1 Automatic Tuning : Press the C button to dispaly
SCAN NO and then press TUNING ,,. buttons to
select SCAN YES , press ENTER button to
automatically search for active broadcasting stations.
1 Manual Tuning : Press the D button to display the
frequency(XX XX XX) and then briefly press the
TUNING ,,.button to increase or decrease the
frequency.
About Ensemble and Service
1 For each ensemble, there are various services such
as audio and data.
1 Shaded areas are frequencies used currently as of
March, 2012 in the UK (“United Kingdom”)
174.928MHz 192.352MHz 209.936MHz 227.360MHz
176.640MHz 194.064MHz 211.648MHz 229.072MHz
178.352MHz 195.936MHz 213.360MHz 230.784MHz
180.064MHz 197.648MHz 215.072MHz 232.496MHz
181.936MHz 199.360MHz 216.928MHz 234.208MHz
183.648MHz 201.072MHz 218.640MHz 235.776MHz
185.360MHz 202.928MHz 220.352MHz 237.488MHz
187.072MHz 204.640MHz 222.064MHz 239.200MHz
188.928MHz 206.352MHz 223.936MHz
190.640MHz 208.064MHz 225.648MHz
Presetting Stations
Example : Presetting DAB station in the memory
1. Press the FUNCTION button to select DAB.
2. Press the STOP (  ) button to display SELECT-X.
3.
Press the TUNING ,,. buttons select stored number.
1 You can select between 1 and 9 , A and F presets.
4.
Press the ENTER button again.
1 "PLS WAIT" disappears and then displays the
stored frequency.
✎ NOTE


If you first use the DAB function, and if there is no service
list on all the frequency, the main unit will automatically scan
for a few senconds later.
What is DAB?
DAB stands for digital audio broadcasting. It is a new
form of radio that is broadcast digitally. Digital audio
provides a superior quality of sound compared to
regular analogue broadcasting.
DAB Related Function
1.
Press the INFO button.
1 Each time you press the button during reception, the
mode changes on the display as follows:
DLS (Dynamic Label Segment): Teletext
Display This function may not work
depending on the service area and
broadcasting circumstances.
Frequency
Ensemble Label
Program Type (Pop, Classic, Rock, etc)
Bit Rate
Date/Time( Time and Date appear
alternately on the screen on about every
three seconds
Quality
1 If no button is pressed for 7~8 seconds, you will be
exited from the Information Display function.
1 Small letters and some special characters (Ω, /, =, ?)
cannot be displayed.
28
English
About RDS
broadcasting(optional)
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
1 PTY (Program Type) : Displays the type of programme
currently being broadcast.
1 PS NAME (Program Service Name) : Indicates the name of
broadcasting station and is composed of 8 characters.
1 RT (Radio Text) : Decodes the text broadcast by a station (if
any) and is composed of maximum 64 characters.
04
✎ NOTE

RDS may not operate correctly if the station tuned
is not transmitting RDS signal properly or if the
signal strength is weak.
To show the RDS signals
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY button while listening to an FM
station.
1 Each time you press the button, the display
change to show you the following information : PS
NAME ) RT) CT ) Frequency
PS
(Program Service)
While searching, <PS> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
Decodes the real time clock from the
FM frequency.
CT (Clock Time)
Frequency
Some stations may not transmit PTY,
RT or CT information therefore this
may not be displayed in all cases.
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels by specifying the PTY codes.
To search for a program using the PTY
codes
Before you start!
1 The PTY Search is only applicable to preset stations.
1 To stop searching any time during the process,
press the STOP button while searching.
1 There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start from
step 1 again.
1 When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
1. Press the RDS PTY button while listening to an
FM station.
2. Press the TUNING ,,. button until the PTY
code you want appears on the display.
1 The display gives you the PTY codes
described to the right.
3. Press the RDS PTY button again, while the PTY code
selected in the previous step is still on the display.
1 The centre unit searches 30 preset FM stations,
stops when it finds the one you have selected,
and tunes in that station.
Station frequency (non-RDS
service)
About characters shown in the display
When the display shows PS,or RT signals,the following
characters are used.
1 The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
1 The display window cannot show accented letters,
<A,> for instance, may stands for accented <A’s>
like <À, Â, Ä, Á, Å and Ã.>
English
29
Basic Functions
1 CT (Clock Time) : Decodes the real time clock from the FM
frequency. Some stations may not transmit PTY, RT or CT
information therefore this may not be displayed in all cases.
1 TA (Traffic Announcement) : When this symbol flashes it
shows that the traffic announcement is in progress.
Basic Functions
Setting the Clock
Timer Function
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
POWER button.
3. Press ENTER.
TIMER
CLOCK
Result: The hour flashes.


Increase the hours:▲
Decrease the hours:▼
4. When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.




2. Press TIMER/CLOCK button and then press
the ENTER button.
Result: "CLOCK" is displayed.
The timer enables you to switch the system on or off
at specific times automatically.
Increase the minutes:▲
Decrease the minutes:▼

Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the
POWER button.
Result: ON is displayed for a few seconds, you can set
the timer switch-on time.
4. Set the timer switch-on time.
a
b
Press the ▲ or ▼button.
Press the ENTER button.
c
d
Result: The minutes flash.
Press the ▲ or ▼ button.
Press the ENTER button.
Result: OFF is displayed for a few seconds, you
can now set the timer switch-off time.
✎ NOTE

CLOCK
3. Press the ENTER button.
Result: " TIMER" appears in the display.
 The current time is now set.
You can display the time, even when you are using another
function, by pressing the TIMER/CLOCK button once.
You can also use # or $ on the front panel instead of
▲,▼buttons in step 3,4.
TIMER
2. Press the TIMER/CLOCK button and
then press ▲ or ▼ buttons until
TIMER is displayed.
5. When the correct minute is displayed, press
ENTER.

Before setting the timer, check that the current time
is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
If you no longer want the system to switch on or off
automatically, you must cancel the timer by pressing
the TIMER ON/OFF button.
5. Set the timer switch-off time.
a
b
Press the ▲ or ▼ button.
Press the ENTER button.
c
d
Result: The minutes flash.
Press the ▲ or ▼ button.
Press the ENTER button.
Result: VOL XX is displayed, where XX
corresponds to the volume already set.
6. Press ▲ or ▼ button to adjust the volume level
and press the ENTER button.
Result: The source to be selected is displayed.
7. Press the ▲ or ▼ button to select the desired source
to be played when the system switches on.



30
English
FM (radio) : a Press the ENTER button.
b Select a preset station by press the ▲
or ▼ button.
DVD/CD (compact disc): Load one audio CD.
USB : Connect the USB device.
04
8. Press the ENTER button.
Result: CHK REC (Do you want to record?) is displayed.
9. Press the ENTER button.
Result: REC N is displayed, you can press the ▲ or ▼
button to select the REC Y or REC N, and then press
ENTER button.
1). If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner
timing recording.
You can set the time that the DVD player will shut
itself off.
1. Press SLEEP button:

2. Press the SLEEP button once or more
times to indicate how long the system
should continue playing before it
switches off:
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN OFF
At any time, you can:
 check the remaining time by pressing the SLEEP
button.
 Change the remaining time by repeating steps 1
and 2.
2). If you select the REC Y, you can set the tuner timing
recording.
a. Press the ENTER button.
Result: ON is displayed for a few seconds, you
can set the tuner timing recording switch-on time.
b. Press the ENTER button.
Result: OFF is displayed for a few seconds, you
can set the tuner timing recording switch-off time.
Result: Starts playback and the following
indication appears: 90 MIN
SLEEP
3.
To cancel the sleep timer, press the SLEEP button
until OFF appears on the display.
✎ NOTE





The maximal tuner timing recording time is 5 hours.
If the timer switch on and off times are identical, the
word ERROR is displayed.
If there is no disc or usb, please wait 5 seconds, it will
automatically change to “FM”.
If the switch-on or -off time is the same as the timing
recording time, only the switch-on or -off time is
effective, and the timing recording time is not applied.
If the auto timer is turned on, the DVD/CD or USB function
may require an additional step to be activated depending
on the disc (or device). Hence it is better for you to select
the FM function instead.
Cancelling the Timer
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you no
longer wish to use the timer, you can cancel it.
1. To cancel the timer, press the TIMER ON/OFF
button once.
Result:
is no longer displayed.
2. To resume the timer, press the TIMER ON/OFF
button again.
Result:
is displayed again.
✎ NOTE

When you select the TIMER OFF mode, the TIMER
RECORDING and TIMER function are not available.
English
31
Basic Functions
Sleep Timer Function
Advanced Functions
1 In Bluetooth mode, some model's Repeat/Stop/
Next/Back functions are not available.
Using Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-compliant
devices to easily interconnect with each other using a short
wireless connection.
 A Bluetooth device may involve with a noise or
malfunction, depending on usage.
- When a part of human body is in contact with the
receiving/transmitting system of the Bluetooth device or
the Product.
- Electrical variation from obstructions caused by a wall,
corner or office partitioning.
- Electrical interference from same frequency-band
devices including medical equipment, microwave oven
and wireless LAN.
- Pair the Product with the Bluetooth device while keeping
a close distance.
- The farther the distance between Product and Bluetooth
device is, the worse the quality is. If the distance
exceeds the Bluetooth operational range, the
connection is lost.
- In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
- This wireless device may cause an electric interference
during its operation.
- The Product has an effective reception range of up to 10
meters in all directions if there are no obstacles. The
connection will be automatically cut off if the distance is
out of this range. Even within this range, the sound
quality may be deteriorated by obstacles such as walls
or doors.
✎ NOTE



-
To disconnect the Bluetooth device from the
Product
You can disconnect the Product from the Bluetooth
device. (Refer to Bluetooth deivice's user's manual)
1 The Product will be disconnected.
1 When the Product is disconnected from the
Bluetooth device, the Product will display
"DIS CON" on the front display.
To disconnect the Product from the
Bluetooth device
Press the F button on the top panel to switch from
“BT/GAL ” to another mode.
1 Except disconnect through function conversion, the
connected Bluetooth device will wait a certain time
for response from the product before terminating
the connection. (Disconnection time may differ,
depending on the Bluetooth device)
1 The currently connected device will be
disconnected.
To connect the product to a Bluetooth device
Check if the Bluetooth device supports the Bluetoothcompliant stereo headset function.
1.
Press the FUNCTION button on the remote control of
product to display the "BT/GAL" message.
1 You will see “WAIT” for 2 seconds and then
“READY” display .
2.
Select the Bluetooth menu on Bluetooth device you
want to connect. (refer to Bluetooth device's user's
manual)
3.
Select the Stereo headset menu on the Bluetooth device.
1 You will see a list of scanned devices.
4.
Select "[Samsung]MICRO XXXXXX" from the
searched list.
1 When the product is connected to the Bluetooth
device, the Product will display "CONNECT" on the
front display, followed by the device name of the
connected Bluetooth device.
5.
Play music on the connected device.
1 You can listen to the music playing on the
connected Bluetooth device over the Product.
32
English
The Product only supports Middle Quality SBC data(up
to 237kbps@48kHz), and does not support High Quality
SBC data([email protected]).
Only one Bluetooth device can be paired at a time.
Search or connection by product may not be performed
properly in the following cases:
If there emits a strong electric wave around product.
If several Bluetooth devices are simultaneously paired
with product.
If the Bluetooth device is turned off, not in place, or
malfunctions.
Note that such devices as microwave oven, wireless
LAN adapter, plasma bulb and gas stove use the same
frequency range as the Bluetooth device, which can
cause an electric interference.
✎ NOTE

In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Product and the Bluetooth device exceeds the limit (10
meters). If the distance decreases to the effective range
or you restart the Bluetooth device, the Bluetooth
connection can be restored.

If the Bluetooth device falls back in the effective range,
you can restart to restore the pairing with the Bluetooth
device.

With some Bluetooth devices, some functions may not
work properly.
05
1. Slide the top panel manually first.
2. Press the Galaxy button under the top panel ,the top
panel pops open automatically,then you can see
the Galaxy Dock.
3. Place the Galaxy device in the Galaxy Dock.
1 The Galaxy device charging automatically.
<Samsung Galaxy Devices>
To use your Samsung Galaxy series device with the Dual
Dock, you must download and install the Docking Mode
application from the Android Market on the device. To
download, follow these steps:
1. Tap the Play Store (Android Market) icon on the
Samsung Galaxy device's main screen.
2. Tap the search icon on the screen to access the
search bar.
3. In the search bar, type in the [Samsung Wireless
with Audio Dock] , and then search.
4. In the search result list, find, and then tap
[Samsung Wireless with Audio Dock] to start
downloading.
5. Tap [install].
ordinary charger.
t When you connect other device to the product after
connecting Samsung Galaxy device in docking
mode, you may have to turn off the Bluetooth mode
of the Samsung Galaxy device.
t If you have trouble with connecting the Samsung
Galaxy device to the Dual Dock, turn off the device's
Bluetooth mode.
t Some Samsung Galaxy device may not fit into this
product’s Galaxy Dock. In such cases, connect
such Galaxy device with USB cable to the USB port
for charging it.(Please do not connect a device via
USB to the product while in AUX, FM or CD mode.
Otherwise, it may cause an error.)
t If your Galaxy device is in Bluetooth mode and
docked onto this product, do not touch on the
Galaxy device’s touch screen with your body.
(suggested to use remote control for operation)
t Compatibility is subject to carrier and regional
specifications.
t Downloading the"Samsung W ireless Audio
with Dock" application is required,if you haven't
downloaded this applictation on your device,and
used only for charging the Galaxy device.
t Some Galaxy devices docked on Galaxy Dock may
experience unstable connection. If such a device is
exposed to shockUIFDPOOFDUJPOXJMMCFCSPLFO
To play music, follow these steps:
Galaxy Compatibility List
1-1. If you start the app when the product is the only
device for the Bluetooth connection,selecting
PLAY in your device automatically establishes
the Bluetooth connection to the product and
the unit plays music.
1-2. If there are multiple devices for Bluetooth
Please see page 40.
connection including the product,
1) When you start the app, the list of the
devices which you can connect to the
product will appear.
2) Play music after connecting to the product
by selecting it on the list of devices.
-
If there exists a Bluetooth device paired
to the product before, it will not appear
in the list and be connected
automatically.
2. If you replace the product which you have
paired to your mobile device,you should
deletethe remaining settings saved in your
device before pairing to the new one.
t Tap
) Tap <Clear data>.
t The operation of the “Samsung wireless
audio with dock ”may be different
depending on application's version.
✎ NOTE
t Once you started the application, running is not
disturbed by charging your mobile device with an
English
33
Advanced Functions
Using the product with Samsung GALAXY
device
Advanced Functions
Using an iPod/iPhone
USB Function
Playing Media Files using the
USB Host Feature
If the system is connected to iPod/iPhone,You can play
music and video in iPod/iPhone using the system.
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 2.0
channel sound by connecting the storage device to
the USB port of the product.
PHONE
5V 500mA
PHONE
5V 500mA
1.
Slide the top panel manually ,you can see the iPod
Dock.
2.
Place the iPod/iPhone in the iPod Dock on the product
top panel.
1 Your iPod/iPhone is automatically turned on.
Press the FUNCTION button to switch to R. IPOD or
IPOD mode.
3.
1. Connect the external USB storage device to the
USB jack of the main unit.
REMOTE IPOD
2. Select the USB mode by pressing the F button
on the main unit.
1 You can select USB by pressing the
FUNCTION button on the remote control.
IPOD
3. Press the ▲▼◄► buttons to select Videos,
Music or Photo.
- Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB
device, perform safe removal before disconnecting
the USB cable.
1 Press the YELLOW(C) button.
- REMOVE will appear on the display.
1 Remove the USB cable.
✎ NOTE

Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
TV will have no output when play a
music file. You can adjust the
volume using the remote control.
Play and Search will be enabled in
your iPod player.
Video playback and file selection will
be enabled on the TV.The remote
control can be used for adjusting the
volume or playback settings.
1 Remote iPod function only support AV output when
play Video file .
1 No video will be displayed on the TV if the TV source
is HDMI/RGB mode.
iPod SYNC
Press and hold number 8 button set up remote iPod/iPod
SYNC.
1 You can set the remote iPod /iPod delay time between 0
mSec and 1Sec. Set it to the optimal status.
Listening to Music (IPOD mode)
You can play music files stored in the iPod by connecting it
to the product.
Music
Function
34
English
iPod
05
2. Press the ▲▼◄► buttons to select Music.
3. Select the music file to play.
1 You can use the remote control or product to
control simple playback functions such as
PLAY, PAUSE, STOP, #, $, ,  and
REPEAT.
✎ NOTE


Adjust the volume to a moderate level before
you connect your iPod and product.
In Remote iPod mode and iPod mode, the
product will charge your iPod's battery.
iPod Music categories
File information including the artist name, album name,
music title and genre will be displayed according to the
ID3 Tag information on the appropriate music file.
Artist
To play by artist.
Generic
To play by genre.
Composers
To play by composer.
Playlist
To play by Playlist.
Album
To play by album.
Songs
To play in numeric or alphabetical order
iPod models that can be used
with this product



iPhone 4S
iPhone 4
iPhone 3GS



iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)



iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4rd generation)

iPod classic
✎ NOTE



✎ NOTE


The category list may differ, depending on the
iPod model.
What is an ID3 Tag?
This is what is attached to an MP3 to carry
information relevant to the file such as the title,
artist, album, year, genre and a comment field.




“Made for iPod/iPhone” means that an
electronic accessory has been designed to
connect specifically to iPod/iPhone and has
been certified by the
developer to meet Apple
performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
The volume control may not operated normally
with iPod models not listed above. If you have a
problem with any of the models listed above,
please update the software of the iPod to the
lastest version.
Depending on the software version of the iPod,
control problems may occur. This is not a
malfunction of this product.
Depending on the software version or the type
of the iPod, some operations may differ. Install
the latest iPod software. (recommended)
Playback of applications' contents through the
product may not be guaranteed. We
recommend playing contents downloaded on
the iPod.
If you have a problem using iPod, please visit
www.apple.com/support/ipod
English
35
Advanced Functions
1. Press the FUNCTION button to select IPOD
Advanced Functions
Recording Function
B
You can record sound of the CD, the Radio
Broadcasting or sound from the external source into
the USB storage device.
1. Switch the system on by pressing the Power
button.
2. Connect the external USB storage device you want
to record to the USB jack (
) of the main unit
3. Play a Disc, tune to a station or connect the
external source to the main unit.
CD




Press the F button on the main unit to select the
DVD/CD function.
Press the OPEN/CLOSE button to open the Disc
Compartment.
Insert a CD and press the OPEN/CLOSE button to
close the Disc Compartment.
Use the CD selection ( # or $ ) button to select
the desired song.
Tuner


Press the F button on the main unit to select FM.
Tune to a station you want to record.
External Source



Connect an External Component/MP3 player to the
main unit.
Press the F button to select the AUX input.
Play a song from the external device.
4. Press the USB REC button to start recording.
CD





“TRACK RECORDING” is displayed
and CD recording starts.
Press and hold the USB REC button
to start recording the all tracks of the
Disc.
“FULL CD RECORDING” is displayed.
If you play the MP3/WMA file, the file is copied into
the USB device totally.
To copy a folder, highlight desired folder first and
press USB REC button, the folder is copied.
“COPY XX” “COPY END” is displayed. When the
recording is done, “STOP” will be displayed.
If there is duplicating file name, "FILE EXISTED" is
displayed, and the function is canceled.
Tuner/External Source

36
“RECORDING” is displayed.
English
5. To stop recording, press the STOP (  ) button
and it automatically creates and saves recorded
files in .MP3 format.

After the recording, a directory named
“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING” will be created
in your device.
✎ NOTE











Do not disconnect the USB or the AC Cord during the
recording as this may cause damage to the file..
If you disconnected USB device during a recording, the
main unit will be powered off and you may not delete
the recorded file. In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
When the USB memory has insufficient free space, it
will display “NOT ENOUGH MEMORY”.
The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system
is not supported.)
When you use CD high speed search function, the CD
recording doesn't work.
Sometimes, the recording time may be longer with
some USB devices.
The equalizer is set to "OFF" automatically and becomes
not available during a CD recording.
The REPEAT function is set to "OFF" automatically and
becomes not available during a CD recording.
You can not record the radio when searching or no
available station is found in the Tuner mode.
Note that setting the input level too loud when recording
music from an external device through the AUX and
USB channel may cause noise into the recording. In that
case, lower the external device’s volume level.
Up to 300MB of a video file can be recorded.
Recording Speed
You can select the recording speed before recording.
1. Each time you press the CD REC SPEED
button on the remote control, the recording
speed will change as following:
RECORD SPD x 1 RECORD SPD x 3


While the Tuner or External Source is recording, the
recording speed does not supported.
When you select RECORD SPD x 3, the
audio sound will not be output.
05
Other Information
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and
contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
t*TUIFQPXFSDPSEQMVHHFETFDVSFMZJOUPUIFPVUMFU
t5VSOPGGUIFQPXFSBOEUIFOUVSOJUCBDLPO
Playback does not start.
t$IFDLUIFSFHJPOOVNCFSPGUIF%7%
DVD discs purchased from abroad may not be playable.
t$%30.TBOE%7%30.TDBOOPUCFQMBZFEPOUIJTproduct.
t.BLFTVSFUIBUUIFSBUJOHMFWFMJTDPSSFDU
Playback does not start
immediately when the
Play/Pause button is pressed.
t"SFZPVVTJOHBEFGPSNFEEJTDPSBEJTDXJUITDSBUDIFTPOUIFTVSGBDF
t8JQFUIFEJTDDMFBO
Sound is not produced.
t/PTPVOEJTIFBSEEVSJOHGBTUQMBZCBDLTMPXQMBZCBDLBOETUFQNPUJPOQMBZCBDL
t"SFUIFTQFBLFSTDPOOFDUFEQSPQFSMZ *TUIFTQFBLFSTFUVQDPSSFDUMZDVTUPNJ[FE
t*TUIFEJTDTFWFSFMZEBNBHFE
The remote control does not work.
t*TUIFSFNPUFDPOUSPMCFJOHPQFSBUFEXJUIJOJUTPQFSBUJPOSBOHFPGBOHMFBOE
EJTUBODF
t"SFUIFCBUUFSJFTESBJOFE
t%JTDJTSPUBUJOHCVUOP
picture is produced.
t*TUIF57QPXFSPO
t"SFUIFWJEFPDBCMFTDPOOFDUFEQSPQFSMZ
t*TUIFEJTDEJSUZPSEBNBHFE
t"QPPSMZNBOVGBDUVSFEEJTDNBZOPUCFQMBZBCMF
t1JDUVSFRVBMJUZJTQPPSBOE
picture is shaking.
Audio language and subtitles do
not work.
t"VEJPMBOHVBHFBOETVCUJUMFTXJMMOPUXPSLJGUIFEJTDEPFTOPUDPOUBJOUIFN
The menu screen does not appear
even when the menu function is
selected.
t"SFZPVVTJOHBEJTDUIBUEPFTOPUDPOUBJONFOVT
Aspect ratio cannot be changed.
t:PVDBOQMBZ%7%TJO8*%&NPEF-&55&3#09NPEFPS1"/
4$"/NPEFCVU%7%TDBOCFTFFOJOSBUJPPOMZ3FGFSUPUIF%7%EJTD
jacket and then select the appropriate function.
English
37
Advanced Functions / 06 Other Information
Troubleshooting
Other Information
Symptom
Check/Remedy
t5IFQSPEVDUJTOPUXPSLJOH
(Example: The power goes out or
the front panel key doesn't work
or a strange noise is heard.)
tWhile “NO DISC” message appears on the display of the product, press and hold the
STOP () button on the main unit for longer than
5 seconds with no disc is inserted (reset function).
t5IFQSPEVDUJTOPUXPSLJOH
normally.
The rating level password has been
forgotten.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
t*TUIFBOUFOOBDPOOFDUFEQSPQFSMZ
t*GUIFBOUFOOBhTJOQVUTJHOBMJTXFBLJOTUBMMBOFYUFSOBM'.BOUFOOBJOBOBSFBXJUIHPPE
reception.
t8IJMFi/0%*4$wNFTTBHFBQQFBSTPOUIFEJTQMBZPGUIFQSPEVDUQSFTTBOEIPMEUIF
main unit's STOP () button for longer than 5 seconds. “INIT” appears on the display
and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Language code list
Enter the appropriate code number for OTHERS of Disc Menu, Audio and Subtitle. (See page 19).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1142
Greek
1239
Interlingue
1345
Malagasy
1482
Kirundi
1527
1028
Abkhazian
1144
English
1245
Inupiak
1347
Maori
1483
Romanian
1528
Tajik
Thai
1032
Afrikaans
1145
Esperanto
1248
Indonesian
1349
Macedonian
1489
Russian
1529
Tigrinya
Turkmen
1039
Amharic
1149
Spanish
1253
Icelandic
1350
Malayalam
1491
Kinyarwanda
1531
1044
Arabic
1150
Estonian
1254
Italian
1352
Mongolian
1495
Sanskrit
1532
Tagalog
1045
Assamese
1151
Basque
1257
Hebrew
1353
Moldavian
1498
Sindhi
1534
Setswana
1051
Aymara
1157
Persian
1261
Japanese
1356
Marathi
1501
Sangro
1535
Tonga
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
Bashkir
1166
Fiji
1283
Javanese
1358
Maltese
1503
Singhalese
1539
Tsonga
1057
Byelorussian
1171
Faeroese
1287
Georgian
1363
Burmese
1505
Slovak
1540
Tatar
1059
Bulgarian
1174
French
1297
Kazakh
1365
Nauru
1506
Slovenian
1543
Twi
1060
Bihari
1181
Frisian
1298
Greenlandic
1369
Nepali
1507
Samoan
1557
Ukrainian
1069
Bislama
1183
Irish
1299
Cambodian
1376
Dutch
1508
Shona
1564
Urdu
1066
Bengali;
Bangla
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
Tibetan
1194
Galician
1301
Korean
1393
Occitan
1511
Albanian
1581
Vietnamese
1070
Breton
1196
Guarani
1305
Kashmiri
1403
(Afan) Oromo
1512
Serbian
1587
Volapuk
1079
Catalan
1203
Gujarati
1307
Kurdish
1408
Oriya
1513
Siswati
1613
Wolof
1093
Corsican
1209
Hausa
1311
Kirghiz
1417
Punjabi
1514
Sesotho
1632
Xhosa
1097
Czech
1217
Hindi
1313
Latin
1428
Polish
1515
Sundanese
1665
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
Chinese
1697
Zulu
1105
Danish
1229
Hungarian
1327
Laothian
1436
Portuguese
1517
Swahili
1109
German
1233
Armenian
1332
Lithuanian
1463
Quechua
1521
Tamil
1130
Bhutani
1235
Interlingua
1334
Latvian,
Lettish
1481
RhaetoRomance
1525
Tegulu
38
English
06
Other Information
Specifications
General
FM TUNER
DAB
Weight
Dimensions
1.95 Kg
Operating Temperature Range
+5°C~+35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.6 %
Signal/noise ratio
70 dB
Usable sensitivity
85 dB
Total harmonic distortion
0.2 %
DVD (Digital Versatile Disc)
Disc(1 Disc)
CD : 12 cm (COMPACT DISC)
230 (W) x 120 (H) x 230 (D) mm
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Y : 1.0 Vp-p (75 Ω load)
Video Output
Component Video
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Video/Audio
Amplifier
HDMI
1080p, 1080i, 720p, 480p(576p)
speaker output
60 W/CH(4 Ω/100 Hz)
Frequency range
20Hz~20KHz
S/N Ratio
75dB
Channel separation
60dB
Input sensitivity
(AUX)800mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
English
39
Other Information
Galaxy Compatibility List
compatibility
of the following
models is proved.
TheThe
compatibility
of following
model proved.
This product is compatible with gingerbread 2.3 version or later.
This product is compatible with gingerbread 2.3 version or later.
Phone Category
` Australia
S LTE
` Canada
Note
S
S LTE
` China
Note
Note
Note
S
S
S
` Germany
Note
` Hong Kong
Note
S
` India
Note
S
` Italy
S
40
English
Model Name
GT-I9210
SGH-I717
GT-I9100
SGH-I727
GT-I9220
GT-I9228
SCH-I889
GT-I9100
GT-I9108
SCH-I919
GT-N7000
GT-N7000
GT-I9100
GT-N7000
GT-I9100
GT-I9100
Phone Category
` Japan
Note
S
S LTE
` Korea, Republic of
Note
S
S LTE
` Malaysia
Note
S
` Poland
S
` Sweden
S LTE
` Thailand
Note
` Trinidad & Tobago
Note
` Tunisia
S
` Turkey
Note
` USA
Note
S
S LTE
Model Name
SGH-N054
SGH-N033
SGH-N034
SHV-E160
SHW-M250
SHV-E110
GT-N7000
GT-I9100
GT-I9100
GT-I9210
GT-N7000
GT-N7000
GT-I9100
GT-N7000
SGH-I717
SGH-I777
SGH-I727
06
Contact SAMSUNG WORLD WIDE
Area
Contact Center
Web Site
Area
Contact Center
Web Site
0-800-555-555
0-88-555-55-55
8-10-800-500-55-500
0-800-61440
English
41
Other Information
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Correct disposal of batteries in this product(optional)
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment(optional)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Code No. AH68-02549B(Rev 0.0)