Samsung WD0904W8Y1/XTL User manual

Add to my manuals
44 Pages

advertisement

Samsung WD0904W8Y1/XTL User manual | Manualzz

WD0804W8(E/N/S/V/W/Y)

WD0802W8(E/N/S/V/W/Y)

WD0804Y8(E/N/S/V/W/Y)

WD0802Y8(E/N/S/V/W/Y)

WD0904W8(E/N/S/V/W/Y)

WD0902W8(E/N/S/V/W/Y)

WD0904Y8(E/N/S/V/W/Y)

WD0902Y8(E/N/S/V/W/Y)

Washing Machine

user manual

This manual is made with 100% recycled paper.

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive a more complete service, please register your product at

www.samsung.com/register

WD0904W8-02927X-04_EN(XTL).indd 1 2014/3/20 11:27:27

features of your new samsung washing machine

Your new washing machine will change the way you feel about doing laundry. From its specialised Eco Bubble function to its energy efficiency, your new Samsung washing machine has all the benefits to make washing laundry as easy and pleasant as possible.

• Eco Bubble Wash

Samsung’s effective Eco Bubble delivers improved cleanliness with advanced fabric care. Eco

Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.

• Washing and drying with one button

Enjoy convenient non stop washing and drying managing. 4 different special drying programs can be selected to perform the whole wash cycle including the drying cycle using one button.

• Cupboard(standard program), Low temp drying, Iron, Time Drying (30min ~ 270mins)

Those drying programs also can be operated independently of washing programs.

• Air Wash

The Air Wash system deodorizes unpleasant smells and sanitizes the laundry that cannot be eliminated through a conventional washing system, a benefit of its unique air-washing mechanism.

• Air-washable : Woolen coats, cotton/down jumpers, sweaters, suits, pillows, cushions, needlework dolls

• Not applicable : leather, silk, velvet, electric blankets, stained laundry

• Quick Wash

No time to waste! Quick Wash program can help your busy life - now you can wash your favorite clothes (up to 2Kg) in 15 minutes!

• Quiet Drive Motor

Samsung’s unique Quiet Drive Motor works without belts or gears, reducing vibration and making the washer quieter and more durable.

• Eco Drum Clean

Using Ecol Drum Clean helps to keep washing machine clean even without any chemical detergent or bleach. Keep your drum clean and odorless with specialized cleaning program.

• Baby Care

Your Samsung washing machine includes wash programs that add protection to the clothing of children with sensitive skin. These programs reduce skin irritation in children by minimizing detergent residue. In addition, these programs classify laundry into various types and the wash is performed according to the laundry characteristics so that children’s clothes feel refreshingly clean whenever they are put on.

2_ features

WD0904W8-02927X-04_EN(XTL).indd 2 2014/3/20 11:27:27

• Wool Certified

The machine has been tested and passed the required Woolmark Company specification for machine washable wool products. This mark is the upgraded certification better than the existing

Woolmark, which guarantees not only washing performance but also fabric care for wool products.

Fabrics should be washed according to the instructions on the garment label as specified by

Woolmark and Samsung.

• Delay End

Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of using your washing machine especially when you have to go out.

• Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing machine. This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated.

This manual contains important information on the installation, use, and care of your new

Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how to use the washing machine, and tips for making the most of its state-of-the-art features and functions. The “Troubleshooting and information codes” section on page 39 tells you what to do if something goes wrong with your new washing machine.

WD0904W8-02927X-04_EN(XTL).indd 3 features

_3

2014/3/20 11:27:27

safety information

Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take time to read this manual to take full advantage of your washer’s many benefits and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance and retain it at a safe place near the appliance for your future reference. Use this appliance only for its intended purpose as described in this instruction manual.

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your washer.

Because these following operating instructions cover various models, the characteristics of your washer may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www.samsung.com.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury, death and/or property damage.

CAUTION

Hazards or unsafe practices that may result in personal injury and/or property damage.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service centre for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

As with any equipment using electricity and moving parts, potential hazards exist. To safely operate this appliance, become familiar with its operation and exercise care when using it.

4_ safety information

WD0904W8-02927X-04_EN(XTL).indd 4 2014/3/20 11:27:28

Do not let children (or pets) play on or in your washing machine. The washing machine door does not open easily from the inside, and children may be seriously injured if trapped inside.

WARNING

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children should be supervised to ensure that they do not play with the appliance.

If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

This appliance should be positioned to be accessible to the power plug, the water supply tabs and the drain pipes.

For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.

Use the new hose-sets and old hose-sets should not be reused.

WD0904W8-02927X-04_EN(XTL).indd 5 safety information

_5

2014/3/20 11:27:28

safety information

WARNING

SEVERE WARNING SIGNS FOR INSTALLATION

The installation of this appliance must be performed by a qualified technician or service company.

- Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

The appliance is heavy, take care upon lifting it

Plug the power cord into an AC 220-240V / 50Hz wall socket or higher and use the socket for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.

- Ensure that the power voltage, frequency and current are the same as those of the product specifications. Failure to do so may result in electric shock or fire. Plug the power plug into the wall socket firmly.

Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failure to do so may result in electric shock or fire.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor.

- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

When the appliance or power plug or power cord is damaged, contact your nearest service centre.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- This may result in electric shock, fire, an explosion, or problems with the product

- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

Do not install this appliance near a heater, inflammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Do not install this appliance in a location of low temperature

- Frost may cause tubes to burst

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or fire.

Do not use an electric transformer.

- It may result in electric shock or fire.

Do not use a damaged power plug, damaged power cord or loose wall socket.

- This may result in electric shock or fire.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

6_ safety information

WD0904W8-02927X-04_EN(XTL).indd 6 2014/3/20 11:27:28

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or fire.

Do not pull the power cord, when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failure to do so may result in electric shock or fire.

Do not lay the power cord and tubes where you may fall over them.

CAUTION

CAUTION SIGNS FOR INSTALLATION

This appliance should be positioned in such a way that it is accessible to the power plug.

- Failure to do so may result in electric shock or fire due to electric leakage.

Install your appliance on a level and hard floor that can support its weight.

- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the product.

WARNING

SEVERE WARNING SIGNS FOR USING

If the appliance is flooded, turn off the water & power supply immediately and contact your nearest service centre.

- Do not touch the power plug with wet hands

- Failure to do so may cause electric shock

If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact your nearest service centre.

- Failure to do so may result in electric shock or fire.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or fire.

Do not let children play in or on the washer. In addition, when disposing of the appliance, remove the washer door lever.

- If trapped inside, the child may become trapped and suffocate to death.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it.

WD0904W8-02927X-04_EN(XTL).indd 7 safety information

_7

2014/3/20 11:27:28

safety information

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other flammable or explosive substances.

- This may result in electric shock, fire or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning).

- Water flowing out of the washer may result in burns or cause the floor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Do not insert your hand under the washer.

- This may result in injury.

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or fire.

Do not let children or infirm persons use this washer unsupervised. Do not let children climb in the appliance

- Failure to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull straight out from the outlet.

- Damage to the cord may cause short-circuit, fire and/or electric shock

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

- When repairing or reinstalling the appliance is required, contact your nearest service centre.

- Failure to do so may result in electric shock, fire, problems with the product, or injury.

If the water supply hose comes loose from the Water tap and floods the appliance, unplug the power plug.

- Failure to do so may result in electric shock or fire.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/lightning storm.

- Failure to do so may result in electric shock or fire.

8_ safety information

WD0904W8-02927X-04_EN(XTL).indd 8 2014/3/20 11:27:28

CAUTION

CAUTION SIGNS FOR USING

When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.

- Failure to do so may result in discolouration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer.

- When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the Water

Tap slowly.

Open the Water Tap slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

- If the washer is used when it is flooded because of a draining problem, it may result in electric shock or fire due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water leakage.

Ensure that the Water Tap is turned off when the washer is not being used.

- Ensure that the screw on the water supply hose connector is properly tightened.

- Failure to do so may result in property damage or injury.

Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).

- If the door is not closed completely, it may result in water leakage.

Open the Water Tap and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product.

- If the screws or the water supply hose connector are loose, it may result in water leakage.

WD0904W8-02927X-04_EN(XTL).indd 9 safety information

_9

2014/3/20 11:27:28

safety information

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, fire, problems with the product, or injury.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.

Do not place an object that generates a electromagnetic field near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a special program for washing these items.

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, floor or clothing due to abnormal vibrations.

* Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent box after opening it.

- This may result in injury as your hand may be caught by the detergent input device. Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.

- This may result in damage to the washer, or injury and death in the case of pets due to the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.

- This may cause the tub to rust.

- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

10_ safety information

WD0904W8-02927X-04_EN(XTL).indd 10 2014/3/20 11:27:28

Do not use natural hand-washing soap for the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the product, discolouration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Place socks and brassieres into the washing net and wash them with the other laundry.

- Failure to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

For washing machines with ventilation openings in the base, ensure that the opening is not obstructed by carpet or any other obstacles.

Make sure that the pockets of all clothing to be washed are empty.

- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.

Do not wash clothing with large buckles, buttons, or other heavy metal.

WARNING

SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it.

Do not use the strong acid cleaning agent.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discolouration, deformation, damage, electric shock or fire.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failure to do so may result in electric shock or fire.

WD0904W8-02927X-04_EN(XTL).indd 11 safety information

_11

2014/3/20 11:27:28

contents

SETTING UP YOUR WASHING

MACHINE

13

WASHING A LOAD OF LAUNDRY

21

CLEANING AND MAINTAINING YOUR

WASHING MACHINE

34

13 Checking the parts

14 Meeting installation requirements

14 Electrical supply and grounding

14

Water Supply

15 Drain

15 Flooring

15

Surrounding temperature

15 Alcove or closet installation

15 Installing your washing machine

21 Washing for the first time

21 Basic instructions

22 Using the control panel

25

25

25

26

Child lock

Sound off

Delay end

Drain Only Function

My cycle 26

27

28

Eco Bubble

Air Wash

29 Using dry course

30 Washing clothes using the cycle selector

31

Washing clothes manually

31 Laundry guidelines

32 Detergent and additives information

32

Which detergent to use

33

33

Detergent drawer

Liquid Detergent (Selected models)

34 Eco Drum Clean

35 Draining the washing machine in an emergency

36 Cleaning the debris filter

36 Cleaning the exterior

37 Cleaning the detergent drawer and drawer recess

37 Cleaning the water hose mesh filter

38 Repairing a frozen washing machine

38 Storing your washing machine

39 Check these points if your washing machine...

40 Information codes

12_ contents

TROUBLESHOOTING AND

INFORMATION CODES

39

CYCLE CHART

41

APPENDIX

42

41 Cycle chart

42 Fabric care chart

42 Protecting the environment

42 Declaration of conformity

43 Specifications

WD0904W8-02927X-04_EN(XTL).indd 12 2014/3/20 11:27:28

setting up your washing machine

Be sure to have your installer follow these instructions closely so that your new washing machine works properly and so that you’re not at risk of injury when doing laundry.

CHECKING THE PARTS

Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.

If your washing machine was damaged during shipping, or if you do not have all of the parts, contact

Samsung Customer Service or your Samsung dealer.

Work top

Release lever

Detergent drawer

Control panel

Door

Plug

Levelling feet

Tub

Drain hose

Debris filter

Emergency drain tube

Filter Cover

Spanner

* Bolt hole covers

Cold

Hot

(Selected model)

Water supply hose

Hose guide

* Bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).

Liquid detergent box

(Selected model)

WD0904W8-02927X-04_EN(XTL).indd 13 setting up your washing machine

_13

2014/3/20 11:27:29

setting up your washing machine

MEETING INSTALLATION REQUIREMENTS

Electrical supply and grounding

WARNING

Never use an extension cord.

Use only the power cord that comes with your washing machine.

When preparing for installation, ensure that your power supply offers:

AC 220-240V / 50Hz fuse or circuit breaker

Individual branch circuit serving only your washing machine

Your washing machine must be grounded. If your washing machine malfunctions or breaks down, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Your washing machine comes with a power cord having a three-prong grounding plug for use in a properly installed and grounded outlet.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Improperly connecting the equipment-grounding conductor can result in electric shock.

Check with a qualified electrician or serviceman if you are unsure if the washing machine is properly grounded. Do not modify the plug provided with the washing machine. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Water Supply

Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut off completely. Or, it may take the washing machine longer to fill than what the controls allow, resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/ flooding if an internal hose becomes loose, is built into the controls.)

The water taps must be within 120cm of the back of your washing machine for the provided inlet hoses provided to reach your washing machine.

Most plumbing supply stores sell inlet hoses of various lengths up to 305 cm long.

WARNING

You can reduce the risk of leaks and water damage by:

• Making water taps easily accessible.

• Turning off taps when the washing machine is not in use.

• Periodically checking for leaks at water inlet hose fittings.

Before using your washing machine for the first time, check all connections at the water valve and taps for leaks.

14_ setting up your washing machine

WD0904W8-02927X-04_EN(XTL).indd 14 2014/3/20 11:27:29

Drain

Samsung recommends a standpipe height of 65cm. The drain hose must be routed through the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washing machine must be installed on a solidly constructed floor.

Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are contributing factors to vibrations and the tendency for your washing machine to move slightly during the spin cycle.

Never install your washing machine on a platform or poorly supported structure.

Surrounding temperature

Do not install your washing machine in areas where water may freeze, since your washing machine always retains some water in its water valve, pump, and hose areas. Frozen water in the lines can cause damage to belts, the pump, and other components.

Alcove or closet installation

To operate safely and properly, your new washing machine requires minimum clearances of:

Sides – 25 mm

Top – 25 mm

Rear – 50 mm

Front – 465 mm

If both the washing machine and a dryer are installed together, the front of the alcove or closet must have at least 465 mm unobstructed air opening. Your washing machine alone does not require a specific air opening.

INSTALLING YOUR WASHING MACHINE

STEP 1

Selecting a location

Before you install the washing machine, make sure the location:

• Has a hard, level surface without carpeting or flooring that may obstruct ventilation

• Is away from direct sunlight

• Has adequate ventilation

• Will not be freezing (below 0 ˚C)

• Is away from heat sources such as oil or gas

• Has enough space so that the washing machine doesn’t stand on its power cord

WD0904W8-02927X-04_EN(XTL).indd 15 setting up your washing machine

_15

2014/3/20 11:27:29

setting up your washing machine

STEP 2

Removing the shipping bolts

Before installing the washing machine, you must remove all shipping bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

Option

2. Hold the bolt with the spanner and pull it through the wide section of the hole. Repeat for each bolt.

Option

3. Fill the holes with the supplied plastic covers.

Option

4. Store the shipping bolts away safely in case you have to move the washing machine in the future.

WARNING

Packaging materials can be dangerous to children; keep all packaging material (plastic bags, polystyrene, etc.) well out of the reach of children.

16_ setting up your washing machine

WD0904W8-02927X-04_EN(XTL).indd 16 2014/3/20 11:27:29

STEP 3

Adjusting the Levelling feet

When installing your washing machine, ensure that the power plug, the water supply and the drain are easily accessible.

1. Slide the washing machine into position.

2. Level your washing machine by turning the levelling feet in and out as necessary by hand.

3. When your washing machine is level, tighten the nuts using the wrench supplied with your washing machine.

STEP 4

Connecting the water and drain

Connecting the water supply hose

1. Take the L-shaped arm fitting for the cold water supply hose and connect it to the cold water supply intake on the back of the machine.

Tighten by hand.

The water supply hose must be connected to the washing machine at one end and to the water tap at the other. Do not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high pressure hose.

2. Connect the other end of the cold water supply hose to your sink’s cold water tap and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.

Option

For selected models with an additional hot water intake:

1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Tighten by hand.

2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten it by hand.

3. Use a Y-piece if you only want to use cold water.

setting up your washing machine

_17

WD0904W8-02927X-04_EN(XTL).indd 17 2014/3/20 11:27:30

setting up your washing machine

Connecting the water supply hose

1. Remove the adaptor from the water supply hose.

Adaptor

Water supply hose

5 mm

2. First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.

1

2

3. Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

1

4. Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

3

Water tap

2

5. Connect the other end of the water supply hose to the inlet water valve at the rear of the washing machine. Screw the hose clockwise all the way in.

Option

18_ setting up your washing machine

WD0904W8-02927X-04_EN(XTL).indd 18 2014/3/20 11:27:30

6. Turn on the water supply and ensure that no water leaks from the water valve, tap or adaptor. If there is a water leaks, repeat the previous steps.

WARNING

Do not use your washing machine if there is a water leak.

This may cause electric shock or injury.

If the water tap has a screw type tap, connect the water supply hose to the tap as shown.

Use the most conventional type of tap for the water supply. In case the tap is square or too big, remove the spacing ring before inserting the tap into the adaptor.

Connecting the Aqua Hose (Selected models)

The Aqua Hose was invented for perfect leakage protection.

It is attached to the water supply hose and automatically cuts off the water flow if the hose is damaged. It also displays a warning indicator.

Connect the water supply hose to the tap as shown.

WD0904W8-02927X-04_EN(XTL).indd 19 setting up your washing machine

_19

2014/3/20 11:27:30

setting up your washing machine

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

Drain hose

Hose guide

2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than

60 cm and no longer than 90 cm.

The standpipe drain requires;

• minimum diameter 5 cm.

• minimum carry-away capacity 60 liter per minute.

STEP 5

Powering your washing machine

Plug the power cord into a wall sockets, an AC 220-240V / 50Hz approved electrical outlet protected by a fuse or circuit breaker. (For more information on electrical and grounding requirements, see page 14.)

Test run

Make sure that you install your washing machine correctly by running the Rinse+Spin cycle after the installation is complete.

20_ setting up your washing machine

WD0904W8-02927X-04_EN(XTL).indd 20 2014/3/20 11:27:31

washing a load of laundry

With your new Samsung washing machine, the hardest part of doing laundry will be deciding which load to wash first.

WASHING FOR THE FIRST TIME

Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).

1. Press the Power button.

2. Add a little detergent to the detergent compartment in the detergent drawer.

3. Turn on the water supply to the washing machine.

4. Press the Start/Pause button.

This will remove any water that might be left over in the machine from the manufacturer’s test run.

Compartment : Detergent for prewash, or starch.

Compartment : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product.

To use liquid detergent, use the liquid detergent box (refer to page 33 of the manual for the corresponding model). Do not add powdered detergent into the liquid detergent box.

Compartment : Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX) of “A”)

BASIC INSTRUCTIONS

1. Load your laundry into the washing machine.

WARNING

Do not overload the washing machine. To determine the load capacity for each type of laundry, refer to the chart on page 31-32.

• Make sure that laundry is not caught in the door, as this may cause a water leak.

• Washing detergent may remain in the front rubber part of the washer after a wash cycle.

Remove any remaining detergent, as they may cause a water leak.

• Do not touch the door glass while your washing machine is running or it may be hot.

• Do not open the detergent drawer or the debris filter while your washing machine is running or you might be exposed to hot water or steam.

• Do not wash water-proofed items in normal cycle except outdoor care program.

2. Close the door until it latches.

3. Turn the power on.

4. Add detergent and additives to the dispenser drawer.

5. Select the appropriate cycle and options for the load.

The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.

6. Press the Start/Pause button.

washing a load of laundry

_21

2014/3/20 11:27:31 WD0904W8-02927X-04_EN(XTL).indd 21

washing a load of laundry

USING THE CONTROL PANEL

1 2

3 4 5

6

1

7 8 9 10 11 12 13

1

DIGITAL GRAPHIC

DISPLAY

2 CYCLE SELECTOR

Displays the remaining wash cycle time, all cycle information, and error messages.

Select the tumble pattern and spin speed for the cycle.

For detailed information, refer to “Washing clothes using the cycle selector”. (see page 30)

Cotton - For average or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.

Synthetics - For averagely or lightly soiled blouses, shirts, etc., made of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar blends.

Daily Wash - Use for everyday items such as underwear and shirts.

15’ Quick Wash - For lightly soiled garments and less than 2kg laundry that you require quickly.

• The values(15’ minutes) can vary from the indicated values depending on water pressure, water hardness, water inlet temperature, room temperature, type and amount of washing and degree of soiling, utilized detergent, fluctuation in the electricity supply and extra options selected.

• Add only a small amount of detergent for a small amount of laundry

(less than 2kg) for the 15’ Quick Wash course, because if you add too much detergent, detergent may remain after the wash.

Spin - Performs an additional spin cycle to remove more water.

Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.

Eco Drum Clean - Use for drum cleaning. It cleanses dirt and bacteria of drum. Regular use (after every 40 washes) is recommended. No detergent or bleach needed.

Air Wash - This course is useful for removing bad odors. Turning the

Cycle Selector cycles through the following operating modes.

(Deodorization  Sterilization)

• Deodorization - Reduces bad smells from the laundry

• Sterilization - Deodorize and sanitize the laundry by stronger air wash action with higher temp.

Drying - Select to dry laundry automatically by detecting the amount and weight of the laundry.

22_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 22 2014/3/20 11:27:31

3

4

5

6

PREWASH

SELECTION BUTTON

DELAY END

SELECTION BUTTON

TEMPERATURE

SELECTION BUTTON

RINSE SELECTION

BUTTON

7

SPIN SELECTION

BUTTON

Super Eco Wash - Low temperature Eco Bubble ensures that you achieve perfect wash results while allowing effective energy saving.

Outdoor Care - Use for outdoor wear such as mountain clothes, skiwear, and sports wear. Fabrics include functional technology finishes and fibers such as spandex, stretch, and micro-fiber.

Baby Care - High temperature wash and extra rinses ensure that no washing powder remains to mark your thin clothes.

Wool - Only for machine-washable wool. A load should be less than 2.0 kg.

The wool course washes the laundry using gentle cradling actions.

During the wash, the gentle cradling and soaking actions are continued to protect the wool fibers from shrinkage / distortion and for a super gentle clean. This stop operation is not a problem.

Neutral detergent is recommended for wool course, for improved washing results and for improved care of the wool fibers.

The wool wash cycle of this machine has been approved by

Woolmark for the washing of machine-washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine, M1125

(Certificate Number issued by I.W.S. Nominee Co., Ltd.)

Drain Only - Turn the Cycle Selector to the Spin position, press the Spin button repeatedly until “No spin( )” light comes on, and then press the

Start/Pause button to drain the water.

Press this button to select pre-wash. Pre-wash is only available with:

Cotton, Synthetics, Daily Wash, Baby Care.

Press this button repeatedly to cycle through the available Delay End options (from 3 hours to 19 hours in one hour increments).

The hour displayed indicates the time when the wash cycle will be finished.

Press this button repeatedly to cycle through the available water temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).

Press this button to add additional rinse cycles. The maximum number of rinse cycles is five.

Press the button repeatedly to cycle through the available speeds for the spin cycle.

WD0804/WD0904

, 400, 800, 1200, 1400 rpm

WD0802/WD0902

, 400, 800, 1000, 1200 rpm

“No spin ” - The laundry remains in the drum and no spin cycle is performed after the final drain.

WD0904W8-02927X-04_EN(XTL).indd 23 washing a load of laundry

_23

2014/3/20 11:27:32

washing a load of laundry

8

9

DRYING BUTTON

INTENSIVE WASH

SELECTION BUTTON

10

ECO BUBBLE

SELECTION BUTTON

Pressing the button cycles through the following options.

Cup Board  Low Temp  Iron  Time Dry (30min. 1:00 h 

1:30 h  2:00 h  2:30 h  3:00 h  3:30 h  4:00 h  4:30 h) 

Cup Board

Cup Board - Use this cycle to dry loads such as cotton, underwear, and linen.

Low Temp - This cycle protects heat-sensitive items at a low drying temperature.

Iron - Finishes the dry cycle in a moist state appropriate for Ironing.

Time Dry

-Dry the laundry for the specified period of time.

• You must avoid washing laundry that can’t safely be dried as it may be deformed even at low temperatures.

• The Cup Board, Low Temp, Iron and Time Dry options detect the weight of the laundry in order to display an accurate drying time and dry them more completely.

• The drying conditions may differ depending on the type and the amount of laundry.

• Drying is not available for Eco Drum Clean, Air Wash, Outdoor

Care and Wool courses.

Press this button when the laundry is heavily soiled and needs to be washed intensively. The cycle time will be increased if the intensive wash is on.

Eco Bubble selection is turned on as a default. Press the Eco Bubble option button once to deselect and the Bubble Generator OFF (shown on the panel), press it again to turn the function back ON.

Some wash cycles must have Eco Bubble option ON (will show on the panel, and the Generator will turn on automatically).

Other wash cycles do not need this option and automatically turn the

Generator OFF.

On many cycles, you can manually adjust this option, which will visibly affect wash time on the panel to achieve results (please see page 27 for more information).

11

START/PAUSE

SELECTION BUTTON

Press to pause and restart a cycle.

12

MY CYCLE

SELECTION BUTTON

Choose your favorite cycle including temperature, spin, soil level, option, etc.

13 POWER BUTTON

Press it once to turn your washing machine on, press it again to turn your washing machine off.

If the washing machine is left on for more than 10 minutes without any buttons being touched, the power automatically turns off.

24_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 24 2014/3/20 11:27:32

Child lock

The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen can’t be changed.

Activating/Deactivating

If you want to activate or deactivate the Child Lock function, press the Temp. and Rinse buttons at the same time for

3 seconds. “Child Lock ” will be lit when this feature is activated.

When the Child Lock function is activated, only the

Power button works. The Child Lock function remains on even after the power is turned on and off or after the disconnecting and reconnecting the power cord.

3 SEC.

Sound off

The Sound Off function can be selected during all courses. When this function is selected, sound is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is retained.

Activating/Deactivating

If you want to activate or deactivate the Sound Off function, press the Spin and Option buttons at the same time for 3 seconds. The “Sound Off ” will be lit when this feature is activated.

3 SEC.

Delay end

You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at which the wash will be finished.

1. Manually or automatically set your washing machine according to the type of laundry you are washing.

2. Press the Delay End button repeatedly until the delay time is set.

3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will begin counting down until it reaches the set time.

4. To cancel a Delay End function, press the Power button and then turn the washing machine on again.

WD0904W8-02927X-04_EN(XTL).indd 25 washing a load of laundry

_25

2014/3/20 11:27:33

washing a load of laundry

Drain Only Function

When you want just drain water from washing machine, follow directions below.

1. Press the Power button.

2. Turn the Cycle Selector to the Spin position.

3. Press the Spin button repeatedly until “No spin( )” light comes on.

4. Press the Start/Pause button.

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one button convenience.

By pushing the My Cycle button, press the My Cycle button to load and use the saved My

Cycle options. The chosen course and option lights will flicker.

You can set all options as follows in the My Cycle mode.

1. Turn the water supply on.

2. Press the Power button.

3. Select cycle using the Cycle Selector.

4. After cycle selection, set each option.

See the “Cycle Chart” on page 41 for available option settings with each cycle.

5. You can then store the selected cycle and options by pressing and holding the My Cycle button for longer than 3 seconds in My Cycle mode. The cycle and options you select will be displayed the next time you choose the My Cycle function.

You can change the My Cycle settings by repeating the same process above.

The last used setting will be displayed the next time you choose the My Cycle function.

If you press My Cycle and release it within 3 seconds, the previously saved course and options appear. If you press and hold My Cycle for 3 second or longer, the currently set course and options are saved and the LED blinks for 3 seconds.

26_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 26 2014/3/20 11:27:33

Eco Bubble

Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.

Course Bubble function Canceling the bubble function

Cotton, Synthetics, Daily Wash ,

15’ Quick Wash

Available

Super Eco Wash, Outdoor Care,

Baby Care, Wool

Available

Not available

• A different bubble function may be applied depending the course.

Eco Bubble selection is default. Press it once to deselect bubble option, press it again to select bubble option.

1. Open the door, place the laundry inside the wash tub and close the door.

2. Press the Power button.

3. Select a function.

4. Place the appropriate amount of detergent and fabric softener into the corresponding compartments depending on the amount of laundry and close the detergent drawer.

• Add the appropriate amount of detergent into the detergent compartment , and add the fabric softener to softener compartment just under the fiber softener base line (MAX) of “A”)

• When the Prewash course is selected, add detergent into the prewash compartment as well.

• To use liquid detergent, leave the liquid detergent box in the drawer(refer to “Liquid

Detergent” section on page 33).

Do not add powdered detergent into the liquid detergent box.

5. Press the Start/Pause button.

• Press the Start/Pause button to start the wash.

• The amount of the laundry is automatically detected and the laundry is washed.

• Once a washing machine operation begins, you cannot add or select the bubble function.

• Enough bubbles are generated with the specified amount of detergent.

• Please clean the Debris filter frequently. Periodic cleaning helps generate sufficient bubbles.

• Depending on the detergent and the laundry, the bubbles may be absorbed and seem like a small quantity.

• Although bubbles are generated once the wash begins, it may take several minutes for users to see them.

WD0904W8-02927X-04_EN(XTL).indd 27 washing a load of laundry

_27

2014/3/20 11:27:33

washing a load of laundry

Air Wash

Air Wash can refresh laundry without using water owing to its powerful airing system. Clothing that can be refreshed includes woolen coats, cotton jumpers, sweaters and suits. [Two items or less (less than 1 kg)]

1. Open the door, place the laundry into the washing machine and close the door.

2. Press the Power button.

3. Select Air Wash by turning the Cycle Selector.

MODE CYCLE TIME

Deodorization

Sterilization

29 min

59 min

• When one of these options has been selected, no other button can be selected and you can only select the delay end time from between 3:00 – 19:00.

4. Close the door and press the Start/Pause button.

• When there is water in the tub, Air Wash cannot be worked. Drain the water and select

Air Wash.

• Press the

Start/Pause or Power button to remove the laundry.

• Fragrance or dryer sheets can be used with Air Wash programs to add fragrance to your refreshed laundry (one sheet per one or two items).

Avoid Air Wash the following clothes:

• Sensitive clothes made of leather, mink, fur, silk, etc.

• Underwear trimmed with lace, ‘glued’ doll cushions, and dress suits may have their decorations loosened.

• Clothes trimmed with buttons can cause them to break.

• Starchy clothes can become deformed.

• Hard bedding such as a wooden pillows (neck-rest)

- Pillows or blankets filled with plastic or starch rather than cotton

- Electric blankets

• Furry blankets

• Bulky blankets

• Latex pillow

28_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 28 2014/3/20 11:27:33

USING DRY COURSE

Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothes of 5.0kg.

1. Open the door, put in the clothes and close the door again.

2. Press the Power button and then press the Drying button.

: The standard course will be selected automatically.

Drying is not available for Eco Drum Clean, Air Wash, Outdoor Care and Wool courses.

3. Select Drying button as follows.

Drying Programs

• Every press of this button will select drying type repeatedly in the following order:

Cup Board  Low Temp  Iron  Time Dry (30 min. 1:00 h  1:30 h

 2:00 h  2:30 h  3:00 h  3:30 h  4:00 h  4:30 h)  Cup Board

Drying Type Information

Auto

Drying

Cupboard( )

Standard: Dries the laundry.

Max Load Time

(Max Load)

3.0kg

149min.

2.0 kg 160min.

Low Temp.( ) Dries the laundry at a low temperature to protect the texture of the laundry.

Iron( )

For leaving items partially damp so that it can be easily ironed

Time Drying( )

You can select the appropriate drying time depending on the texture, quantity, and moisture.

2.0 kg

5.0 kg

30min.

270min.

• For Auto Drying programs, this machine automatically displays Drying Time by sensing the weight of clothes before drying, and adjusting appropriately.

• For laundry weighing less than 3.0kg, use the Auto Dry. For laundry that weighs more, please use the Time Dry.

• If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying efficiency.

• When using the drying cycle, check if the water supply valve is opened.

4. Put suitable amount of detergent and fiber softener in the detergent tray and close it again.

5. Press Start/Pause button.

: It automatically performs an optimal function from washing to drying.

• The selected course can’t be altered after the start of drying.

• If cold water is not supplied, drying will not be performed.

• In case you wish to dry after hand washing, select both Spin and Dry at the same time.

WD0904W8-02927X-04_EN(XTL).indd 29 washing a load of laundry

_29

2014/3/20 11:27:33

washing a load of laundry

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control” automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.

1. Turn on your sink’s water tap.

2. Press the Power button.

3. Open the door.

4. Load the articles one at a time loosely into the drum, without overfilling it.

5. Close the door.

6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate compartments.

Pre-wash is only available when selecting the Cotton, Synthetics, Daily Wash, Baby care cycles. It is only necessary if your clothing is heavily soiled.

7. Use the Cycle Selector to select the appropriate cycle according to the type of material:

Cotton, Synthetics, Daily Wash, 15’ Quick Wash, Super Eco Wash, Outdoor Care, Baby Care,

Wool, Hand Wash. The relevant indicators will illuminate on the control panel.

8. At this time, you can control the wash temperature, the amount of rinses, the spinning speed, and the delay time by pressing the appropriate option button.

9. Press the Start/Pause button and the wash will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.

Pause Option

Within 5 minutes of starting a wash, it is possible to add/remove laundry items.

1. Press the Start/Pause button to unlock the door.

The door cannot be opened when the water is too HOT or the water level is too HIGH.

2. After closing the door, press the Start/Pause button to restart the wash.

When the cycle is finished:

After the total cycle has finished, the power will turn off automatically.

1. Open the door.

2. Remove laundry.

30_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 30 2014/3/20 11:27:33

Washing clothes manually

You can wash clothes manually without using the Cycle Selector.

1. Turn the water supply on.

2. Press the Power button on the washing machine.

3. Open the door.

4. Load the articles loosely into the drum one at a time, without overfilling it.

5. Close the door.

6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate compartments.

7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)

8. Press the Rinse button to select the required number of rinse cycles.

The maximum number of rinse cycles is five.

The wash duration is increased accordingly.

9. Press the Spin button to select the spin speed.( : No Spin)

10. Press the Delay End button repeatedly to cycle through the available Delay End options

(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at which the wash will be finished.

11. Press the Start/Pause button and the machine will begin the cycle.

LAUNDRY GUIDELINES

Follow these simple guidelines for the cleanest laundry and the most efficient wash.

Always check the Care label on clothing before washing.

Sort and wash your laundry according to the following criteria:

Care Label: Sort laundry into cottons, mixed fibres, synthetics, silks, wools and rayons.

Colour: Divide whites and colours. Wash new colour items separately.

Size: Placing items of different sizes in the same load will improve the wash action.

Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new woollen items, curtains and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.

Emptying pockets

Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects, such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash clothing with large buckles, buttons, or other heavy metal objects.

Metal on clothing may damage your clothing as well as the tub. Turn clothing with buttons and embroidered clothes inside out before washing them. If zips of pants and jackets are open while washing, the spin basket may be damaged. Zips should be closed and fixed with a string before washing.

Clothing with long strings may become entangled with other clothes damaging them. Be sure to fix the strings before starting the wash.

Prewashing cotton

Your new washing machine, combined with modern detergents, will give perfect washing results, thus saving energy, time, water and detergent. However, if your cotton is particularly dirty, prewash with a protein-based detergent.

WD0904W8-02927X-04_EN(XTL).indd 31 washing a load of laundry

_31

2014/3/20 11:27:33

washing a load of laundry

Determining the load capacity

Do not overload the washing machine or your laundry may not wash properly. Use the chart below to determine the load capacity for the type of laundry you are washing.

Fabric Type Load Capacity

Model

Cotton

- average/lightly soiled

- heavily soiled

Synthetics

Outdoor Wear

WD0904 / WD0902

9.0 kg

3.0 kg

2.0 kg

2.0 kg

WD0804 / WD0802

8.0 kg

3.0 kg

2.0 kg

2.0 kg Wool

• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.

If the laundry is unbalanced, the spin efficiency may be degraded.

• When washing Bedding or Duvet cover, the wash time may be lengthened or the spin efficiency may be degraded.

Make sure to insert brassieres (water washable) into a laundry net (to be purchased additionally).

• The metal parts of the brassieres may break through the material and damage the laundry. Therefore make sure to place them inside a fine laundry net.

• Small, light clothing such as socks, gloves, stockings and handkerchiefs may become caught around the door. Place them inside a fine laundry net.

Do not wash the laundry net by itself without other laundry. This may cause abnormal

CAUTION vibrations that could move the washing machine and cause an accident resulting in injury.

DETERGENT AND ADDITIVES INFORMATION

Which detergent to use

The type of detergent you should use is based on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent, which is designed for automatic washing machines.

Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your area. If you do not know how hard your water is, enquire at your local water authority.

Do not use detergent that has hardended or solidified as the detergent may remain in the rinse cycle. It may cause your washing machine to not rinse properly or result in the overflow becoming blocked.

Please note the following when using the Wool course.

• Use a neutral liquid detergent for wool only.

• When using a powder detergent, it may remain on the laundry and cause damage to the material (wool).

32_ washing a load of laundry

WD0904W8-02927X-04_EN(XTL).indd 32 2014/3/20 11:27:33

Detergent drawer

Your washing machine has separate compartments for dispensing detergent and fabric softener.

Add all laundry additives to the correct compartment before starting your washing machine.

Do not open the detergent drawer while your washing machine is running or you might be exposed to hot water or steam.

1. Pull out the detergent drawer on the left side of the control panel.

2. Add the recommended amount of laundry detergent directly into the detergent compartment before starting your washing machine.

To use liquid detergent, use the liquid detergent box (refer to “Liquid Detergent” for the corresponding model).

• Do not add powdered detergent into the liquid detergent box.

3. Add the recommended amount of fabric softener into the softener compartment if required. DO NOT exceed the

MAX FILL ( ) line.

CAUTION

Do NOT add any powder/liquid detergent to the softener compartment ( ).

4. When using the Prewash option, add the recommended amount of laundry detergent into the prewash compartment .

When washing large items do NOT use the following detergetnt types.

• Tablet and capsule type detergents

• Detergents using a ball and net

Concentrated or thick fabric softener and conditioner must be diluted with a little water before being poured into the dispenser (prevents the overflow from becoming blocked).

MAX

Be careful that the fabric softener does not overflow, when you close the detergent drawer after adding fabric softener into the rinse detergent compartment.

Liquid Detergent (Selected models)

To use liquid detergent, place the liquid detergent box into the main wash section of the detergent drawer and pour liquid detergent into the liquid detergent box.

• DO NOT fill above the MAX line.

• When using powdered detergent, remove the liquid detergent box from the detergent drawer. Powdered

Liquid detergent box detergent will not dispense with liquid detergent box.

• After a wash, some liquid may remain in the detergent drawer.

WD0904W8-02927X-04_EN(XTL).indd 33 washing a load of laundry

_33

2014/3/20 11:27:34

cleaning and maintaining your washing machine

Keeping your washing machine clean improves its performance, wards off unnecessary repairs, and lengthens its life.

ECO DRUM CLEAN

This course is a self-cleaning course that removes mold that may occur inside the washing machine.

1. Press the Power button.

2. Turn the Cycle Selector to the ECO Drum Clean course.

• You can only use the Delay End function.

• The water temperature during the ECO Drum Clean is set to 70 ˚C.

You cannot change the temperature.

3. Place the appropriate amount of cleansing agent into the detergent compartment and close the detergent drawer

(when cleaning the drum using a cleansing agent).

• Be sure to use the recommended cleansing agent for cleaning the drum.

• There are powder-type and liquid-type drum cleansing agents. The liquid-type cleaning agent is only available with liquid detergent box (option).

4. Press the Start/Pause button.

• If you press the Start/Pause button, the ECO Drum Clean course begins.

CAUTION

Using the ECO Drum Clean course, you can clean the drum without using a cleansing agent.

Never use the ECO Drum Clean course when laundry is in the washing machine. This may result in damage to the texture or a problem with the washing machine.

• In the ECO Drum Clean course, never use normal detergent.

• Use only 1/10 of the amount of the drum cleansing agent recommended by the cleansing agent manufacturer.

Since using a chlorine bleaching agent may discolour the product, be sure to use only oxygen bleaching agents.

Powder-type cleansing agent: Use a [powder-type bleaching agent] or a [cleansing agent for drum cleaning only].

Liquid-type cleansing agent: Use a [liquid-type oxygen bleaching agent] or a [cleansing agent for drum cleaning only].

34_ cleaning and maintaining your washing machine

WD0904W8-02927X-04_EN(XTL).indd 34 2014/3/20 11:27:34

The ECO Drum Clean Auto Alarm Function

If the “ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are lit after a wash, it indicates that tub (drum) cleaning is required. In this case, remove the laundry from the washing machine, turn the power on, and clean the drum by performing the ECO Drum Clean course.

If you do not perform the ECO Drum Clean course, the

“ECO Drum Clean” indicator on the display and the lamp on the Cycle Selector are turned off. However, the “ECO

Drum Clean” indicator on the display and the lamp on the

Cycle Selector are turned on again after two washes are performed. However, this will not result in a problem with the washing machine.

Although generally, the ECO Drum Clean Auto Alarm appears once a month or so, the frequency may differ depending on the number of times the washing machine is used.

• In case of the alarm, please also clean the debris filter

(refer to “Cleaning the debris filter” section on page

36). Otherwise the performance of the bubble function may lower down.

DRAINING THE WASHING MACHINE IN AN EMERGENCY

1. Unplug the washing machine from the power supply.

2. Open the filter cover by pressing down and pulling its handle.

Filter cover

3. Open the emergency drain cap by pulling it.

4. Hold the cap on the end of the emergency drain tube and slowly pull it out about 15 cm.

5. Allow all the water to flow into a bowl.

Remain water maybe more than you expected. Prepare larger bowl.

6. Reinsert the emergency drain cap and the drain tube.

7. Replace the filter-cover.

Emergency drain tube

Emergency drain cap

WD0904W8-02927X-04_EN(XTL).indd 35 cleaning and maintaining your washing machine

_35

2014/3/20 11:27:35

cleaning and maintaining your washing machine

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is displayed. (Refer to “Draining the washing machine in an emergency” in the previous section.)

If foreign substances accumulate debris filter, the performance of the bubble function will be degraded.

CAUTION

Before cleaning the debris filter, make sure to unplug the power cord.

1. Remove the remaining water first (refer to “Draining the washing machine in an emergency” on page 35.)

If you separate the filter without draining the remaining water, the remaining water may trickle out.

2. Open the filter cover by using a key or coin.

3. Unscrew the emergency drain cap by turning it to the left and drain off all the water.

4. Unscrew the debris filter cap.

Debris filter cap

5. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.

6. Replace the debris filter cap.

7. Replace the filter cover.

CAUTION

Do not open the debris filter cap while the machine is running or hot water may flow out.

• Make sure to replace the filter cap after the filter cleaning. If the filter is out of the machine, your washing machine may malfunction or leak water.

• The filter should be fully assembled after the filter cleaning.

CLEANING THE EXTERIOR

1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a nonabrasive household detergent.

2. Use a soft cloth to dry the surfaces.

3. Do not pour water onto the washing machine.

36_ cleaning and maintaining your washing machine

WD0904W8-02927X-04_EN(XTL).indd 36 2014/3/20 11:27:35

CLEANING THE DETERGENT DRAWER AND DRAWER RECESS

1. Press the release lever on the inside of the detergent drawer and pull the drawer out.

2. Remove the softener divider and the liquid detergent box(option) from the detergent drawer.

Release lever liquid detergent box (Option) softener divider

3. Wash all parts under running water.

4. Clean the drawer recess with an old toothbrush.

5. Replace the softener divider and the liquid detergent box

(option) by pushing it firmly into the drawer.

6. Push the drawer back into place.

7. To remove any remaining detergent, perform a rinse cycle without any laundry in the drum.

CLEANING THE WATER HOSE MESH FILTER

You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is displayed:

1. Turn off the water supply to the washing machine.

2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out due to the air pressure in the hose, cover the hose with a cloth.

3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under water until clean. Also clean inside and outside the threaded connector.

4. Push the filter back into place.

5. Screw the hose back onto the washing machine.

6. Make sure the connections are watertight and turn on the tap.

WD0904W8-02927X-04_EN(XTL).indd 37 cleaning and maintaining your washing machine

_37

2014/3/20 11:27:35

cleaning and maintaining your washing machine

REPAIRING A FROZEN WASHING MACHINE

If the temperature drops below freezing and your washing machine is frozen:

1. Unplug the washing machine.

2. Pour warm water over the tap to loosen the water supply hose.

3. Remove the water supply hose and soak it in warm water.

4. Pour warm water into the washing machine drum and let it sit for 10 minutes.

5. Reconnect the water supply hose to the water tap and check if the water supply and drain are operating normal.

STORING YOUR WASHING MACHINE

If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.

Washing machines can be damaged if water is left in the hoses and internal components before storage.

1. Select the Cotton cycle and add bleach to the bleach compartment. Then, push the Quick

Wash button and run your washing machine through the cycle without a load.

2. Turn the water taps off and disconnect the inlet hoses.

3. Unplug your washing machine from the electrical outlet, and leave your washing machine door open to allow air to circulate inside the tumbler.

If your washing machine has been stored in below-freezing temperatures, allow time for any leftover water in your washing machine to thaw out before using it.

38_ cleaning and maintaining your washing machine

WD0904W8-02927X-04_EN(XTL).indd 38 2014/3/20 11:27:35

troubleshooting and information codes

CHECK THESE POINTS IF YOUR WASHING MACHINE...

PROBLEM

Will not start

Has no water or not enough water

Has detergent remaining in the detergent drawer after the wash cycle is complete

Vibrates or is too noisy

The washing machine does not drain and/or spin

Door is locked shut or will not open.

SOLUTION

Make sure your washing machine is plugged in.

Make sure the door is firmly closed.

Make sure the water source tap(s) are turned on.

Make sure to press the Start/Pause button.

Turn the water tap on fully.

Make sure the water source hose is not frozen.

Straighten the water intake hoses.

Clean the filter on the water intake hose.

Make sure your washing machine is running with sufficient water pressure.

Make sure the detergent is added to the center of the detergent drawer.

Make sure your washing machine is on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance.

Make sure that the shipping bolts are removed.

Make sure your washing machine is not touching any other object.

Make sure the laundry load is balanced.

Straighten the drain hose. Eliminate kinked hoses.

Make sure the debris filter is not clogged.

The door will not open until 3 minutes after the machine stops or the power turns off.

If the problem persists, contact your local Samsung Customer Service.

WD0904W8-02927X-04_EN(XTL).indd 39 troubleshooting and information codes

_39

2014/3/20 11:27:35

troubleshooting and information codes

INFORMATION CODES

If your washing machine malfunctions, you may see an information code on the display. If this happens, please check the table below and try the suggested solution before calling Customer Service.

CODE SYMBOL dE

4E

5E

UE cE/3E/Uc

SOLUTION

Close the door.

Make sure the door is firmly closed.

Make sure the source water tap is turned on.

Check the water pressure.

Clean the mesh filters of water hose.

Clean the debris filter.

Make sure the drainage hose is installed correctly.

Clean the water hose mesh filter.

The laundry load is unbalanced. Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory and an “UE” error message will be shown in the display window.

Call the after-sales service.

For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung

Service Centre or local Samsung dealer.

40_ troubleshooting and information codes

WD0904W8-02927X-04_EN(XTL).indd 40 2014/3/20 11:27:36

cycle chart

CYCLE CHART

(

user option)

PROGRAM

Cotton

Synthetics

Daily Wash

15’ Quick Wash

Eco Drum Clean

Deodorization

Sterilization

Drying

Super Eco Wash

Outdoor Care

Baby Care

Wool

5.0

4.0

2.0

4.0

2.0

-

1.0

1.0

2.0

Max load(kg)

WD0904

WD0902

9.0

WD0804

WD0802

8.0

3.0

3.0

3.0

3.0

5.0

4.0

2.0

4.0

2.0

-

1.0

1.0

2.0

-

-

-

-

-

-

-

-

Pre-wash

DETERGENT wash Softener

yes yes yes yes

-

-

yes yes yes yes

-

-

-

-

Max Temp

(˚C)

-

40

40

95

-

-

40

70

40

95

60

60

-

1200

1200

1400

800

400

-

-

800

Spin Speed(MAX) rpm

WD0804

WD0904

1400

WD0802

WD0902

1200

1200

1400

1200

1200

800

400

-

-

-

1200

1200

1200

800

PROGRAM

Cotton

Synthetics

Daily Wash

15’ Quick Wash

Eco Drum Clean

Deodorization

Sterilization

Drying

Super Eco Wash

Outdoor Care

Baby Care

Wool

Eco Bubble

-

-

-

-

Intensive

-

-

-

-

-

-

-

-

Delay end

Drying

-

-

-

-

-

Cycle time

(min)

110

80

54

15

86

29

59

149

92

77

133

55

1. A cycle with a prewash takes approx. 15 minutes longer.

2. The cycle duration data has been measured under the conditions specified in Standard IEC 60456 / EN 60456.

* Wash : Cotton course, temperature 60 ˚C, maximum spin speed; using a load of 8kg.

* Drying : First drying performed with 3kg load(the load consist: 9 pillowcases and 9 towels) by selecting cupboard drying;

Second drying performed with 3kg load(the load consist: 3 sheets and 8 towels) by selecting cupboard drying;

Third drying performed with 2kg load(the load consist: 5 pillowcases and 7 towels) by selecting cupboard drying.

(1 or 2 towels can be added or removed for setting weight.)

3. Cotton 60˚C + intensive + Eco bubble are programs according to EN60456.

4. Daily Wash : Short program for test institutes.

5. Course time in individual homes may differ from the values given in the table due to variations in the pressure and temperature of the water supply, the load and the type of laundry.

6. When the Intensive Wash function is selected, the cycle time is increased for each cycle.

cycle chart

_41

WD0904W8-02927X-04_EN(XTL).indd 41 2014/3/20 11:27:36

appendix

FABRIC CARE CHART

The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundery problems.

Resistant material

Delicate fabric

Item may be washed at 95 ˚C

Item may be washed at 60 ˚C

Item may be washed at 40 ˚C

Item may be washed at 30 ˚C

Item may be hand washed

Dry clean only

Can be bleached in cold water

Do not bleach

Can be ironed at 200 ˚C max

Can be ironed at 150 ˚C max

Can be ironed at 100 ˚C max

Do not iron

Can be dry cleaned using any solvent

Dry clean with perchloride, lighter fuel, pure alcohol or R113 only

Dry clean with aviation fuel, pure alcohol or R113 only

Do not dry clean

Dry flat

Can be hung to dry

Dry on clothes hanger

Tumble dry, normal heat

Tumble dry, reduced heat

Do not tumble dry

PROTECTING THE ENVIRONMENT

This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance.

Do not exceed the detergent quantities recommended in the detergent manufactures’ instructions.

Use stain removal products and bleaches before the wash cycle only when strictly necessary.

Save water and electricity by only washing full loads (the exact amount depends upon the program used).

DECLARATION OF CONFORMITY

This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.

42_ appendix

WD0904W8-02927X-04_EN(XTL).indd 42 2014/3/20 11:27:37

SPECIFICATIONS

TYPE FRONT LOADING WASHING MACHINE

DIMENSIONS

WATER PRESSURE

WATER VOLUME

WD0904 / WD0902/ WD0804 / WD0802

W598mm X D600mm X H844mm

50 kPa ~ 800 kPa

56 ℓ

WD0904 / WD0902/ WD0804 / WD0802

NET WEIGHT

WASH AND SPIN CAPACITY

DRY CAPACITY

MODEL

WASHING

68 kg

WD0904 / WD0902

9.0 kg [DRY LAUNDRY]

5.0 kg

WD0804 / WD0802

8.0 kg [DRY LAUNDRY]

5.0 kg

WD0904 / WD0902/ WD0804 / WD0802

220 V 150 W

240 V 150 W

POWER

CONSUMPTION

WASH AND

HEATING

DRYING

MODEL

SPIN

230V

PUMPING

220 V

240 V

2000 W

2400 W

230V 1600W

WD0904 / WD0902/ WD0804 / WD0802

350 W

34 W

SPIN

REVOLUTIONS

MODEL rpm

WD0904 / WD0804

1400

WD0902 / WD0802

1200

The appearance and specifications of the product are subject to change without prior notice for purposes of product enhancement.

WD0904W8-02927X-04_EN(XTL).indd 43 appendix

_43

2014/3/20 11:27:37

QUESTIONS OR COMMENTS?

Country

INDIA

CALL

1800 3000 8282 - Toll Free

1800 266 8282 - Toll Free

30308282 - Non Toll Free

This product is RoHS compliant

WD0904W8-02927X-04_EN(XTL).indd 44

OR VISIT US ONLINE AT

www.samsung.com/in/support

Code No. DC68-02927X-04_EN

2014/3/20 11:27:37

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement