Globalsat BTH-820 User manual

BTH-820 Bluetooth Stereo Headset

BTA-809 Bluetooth Stereo Audio Gateway

BTH-820 Bluetooth Stereo Headset provides you the CD quality stereo sound. If a call is coming while you are listening to the music, just press any button to receive the call. Meanwhile, the music will stop automatically, and then resume itself after you hang up the phone.

BTA-809 Bluetooth Stereo Audio Gateway enables your audio device to have the ability of wireless Bluetooth transmission. It can transmit crystal clear digital sound to any compatible Bluetooth audio receiver up to 10 meters away. Just plug the BTA-809 into the iPod Docking connector, the audio music will be sent out from BTA-809 by the wireless Bluetooth signal. Then you can use a Bluetooth headset (receiver) to listen to the music.

Features

BTH-820 BTA-809

Light weight and handy design.

Press any button to receive a call.

In the headset mode, you can adjust the volume and refuse to answer a call.

You can answer the call while listening to the music, and the music will resume automatically after you hang up the phone.

Stereo Audio Gateway

Plug-and-Play

Support standard A2DP profile for consistent and clear stereo sound quality.

Compatible with iPod Photo, Video, nano.

built-in Hold key and microphone.

Stand-by time up to 110 hours.

A2DP+AVRCP Profile

You can control the “play”,

“pause”, “stop”, “next song” and “previous song” of the

Windows Media Player.

Known Supported Device:

Divert the high quality audio from wired to wireless.

Outstanding performance enables you to enjoy the true digital sound

A2DP Profile with CD stereo quality.

You can control the play/mute, volume up and down of

BTH-820.

Support AVRCP.

Fast and simple one-button operation.

Stand-by time up to 80 hours.

Globalsat: BTA-806/BTA-804A

Bluetooth version 1.1/1.2/2.0 compatible.

Operation range up to 10 meters.

Embedded rechargeable Li-polymer battery

LED indicator for low power and charging.

1

Specification

Model Name

Product Description

Color

Certification

Bluetooth Version

BTH-820

Bluetooth Stereo Headset

Blue / Orange

FCC, CE, BQB

Bluetooth v1.2 Specification

BTA-809

Bluetooth stereo Audio Gateway

White

FCC, CE ,BQB ,DGT ,IC

Bluetooth v2.0 Specification

Class 2

Band 2.4GHz ~ 2.4835GHz unlicensed ISM band

RF Output Power

Frequency

Spread Spectrum

Operating Range

Sensitivity

FHSS (Frequency Hopping Spread Spectrum)

10 meters (32 feet)

-80dBm @0.1%BER

Bluetooth Profile Headset,Handsfree,A2DP,AVRCP

Stereo Audio Specification

A2DP,AVRCP

CD-Quality, 44.1, 48KHz 16-bit Stereo Audio Codec

Standby Time

Play Time

Charging Time

Talking Time

Audio input

Audio Output

LED

Battery

Operation Temperature

Up to 110 hours

Up to 6 hours

Up to 3 hours

Up to 6 hours

Bluetooth signal

Up to 80 hours

Up to 7 hours

Up to 3 hours

--

IPOD Docking connect

3.5 mm stereo jack Bluetooth signal

2 LEDs (blue and red)

Rechargeable Li-Polymer battery

-10 ~ 55 ℃

Storage Temperature -20 ~ 60 ℃

Humidity

Dimensions

10% ~ 90% non-condensing

63.5x28.5x18.5mm(L x W x T),

Including back clip

61.8x24.5x15mm(L x W x T)

Weight

Microphone

19 g

Embedded microphone,

(To avoid the noise interference, please put the microphone within

35 cm from your mouth while talking.)

21.5g

--

2

BTH-820

Button Incoming call is ringing

Answer

While on the phone While playing the music with BTA-806

(AVRCP, A2DP profile).

Transfer to cell phone Play / Pause

While playing the music with BTA-809

(AVRCP, A2DP profile).

Play / Pause

Refuse the call Hang up Stop disconnect

Answer

Answer

Volume up

Volume down

Volume up

Volume down

Volume up

Volume down

Answer N/A

Answer N/A

Next Next

Previous Previous

Lock the buttons Lock the buttons

Remark 1 -- To avoid the noise interference, please put the microphone within 30 cm from your mouth while talking.

Lock the buttons

Remote control

(AVRCP) is supported under

“Microsoft Window

Media Player”.

Remark 2

Lock the buttons

Support AVRCP remote control feature.

If BTH-820 works with Bluetooth USB dongle which uses IVT BlueSoleil version

AVRCP, HEADSET profiles.

If BTH-820 works with Bluetooth USB dongle which uses BROADCOM,

WIDCOMM version 4 0.1.700 or above, it will support A2DP, AVRCP profiles.

Status

Standby

Connecting

Transferring

Pairing

Low battery

LED indicator function

BTH-820, BTA-809

Blue LED flash once

Blue LED flash twice

Blue LED flash four times

Blue and red LED flash quickly by turns

Red LED is on

3

BTH-820, BTA-809

Turn on： Press the power button for 2 seconds to turn it on.

Turn off：

Press the power button for 4 seconds to turn it off.

Pairing：

While in the off mode, press the power button for 6 seconds，the blue and red

LED will flash quickly by turns and it will search other device for pairing.

Charging： Connect one end of the charging line to the USB socket of BTH-820 or

BTA-809, and the other end to the USB socket of PC. The red LED will be on when charging and will be off when battery is full. You can use BTA-809 while it is in the charging mode.

Pairing procedure

To pair BTH-820 with

Pairing

BTA-809

BTA-809 with another Bluetooth

BTH-820 with a Bluetooth BTH-820 with a PC cell phone headset

Press the power button for 6 seconds, the blue and red LED will flash alternately and they will search each other for pairing. If pairing is completed, blue

LED will flash four times in every 2 seconds.

Set the BTA-809 and your Bluetooth headset to pairing mode, these two devices will start to pair automatically. If pairing is completed, blue LED will flash four times in every 2 seconds.

Set the BTH-820 into pairing mode. In your cell phone, enter the

Set the BTH-820 into pairing mode. Start the Bluetooth

Bluetooth menu and select “search device” software (for example

IVT BlueSoleil 1.6.2 option. When your cell or Windcomm) on phone finds the BTH-820, your PC and select select it to pair. If pairing is completed, red LED will be off, and only blue

LED will flash, then you can connect your cell phone to BTH-820.

“search device”. After pairing is completed, you will be able to connect BTH-820 and listen to all the music from PC.

-- -- 0000 0000 password

Note:

Supports AVRCP profile, you can use BTH-820 to control iPod. The functions which can be controlled are the following: iPod mode Function available

Music Play / Pause, Volume up, Volume down,

Next, Previous.

Photos

Videos

Play / Pause, Next,

Previous.

Play / Pause, Volume up, Volume down. note

Before you can use BTH-820 to control the iPod, you must select any music playlist and press the play button on your iPod. If you press the play button on BTH-820 instead of iPod, then it will play the previous playlist.

Before you can use BTH-820 to control the iPod, you must select “Photos” / “Photo Library” and press play button on your iPod.

Before you can use BTH-820 to control the iPod, you must select “Videos”, any video file, and then press play button on your iPod.

4

Troubleshooting

Check the battery power.

Make sure the devices are turned on.

Make sure the devices have been paired.

Make sure the devices are within the 10 meters range.

Check the volume.

Check if the audio resource is correctly input.

Pair the devices over again.

Can not connect with cell phone: Delete the BTH-820 device in your cell phone, re-start it and do the pairing again.

Can not turn on the device: Do a Reset. Plug in the charging line to the device to enable the electric power passing by and then unplug it. That will perform the “Reset”. For BTA-809, you need to press the Reset hole under the device.

Copyright

© 2005 Globalsat Technology Corporation. All rights reserved

The trademarks mentioned in this document are legally registered to their respective companies.

FCC Notices

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Exposure requirements:

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO

OPERATE THE EQUIPMENT.

5