Displaylite DEFENDER 31, 38, 43, 48 monitor User's manual

User’s Manual
Document No: DEF-User-C
General Notes:
Information in this document is subject to change without notice.
All trademarks or registered trademarks are the property of their respective
owners.
Details provided are believed to be accurate, but no liability in respect of
any information supplied is accepted by Displaylite.
© 2007 Displaylite Ltd
Displaylite Ltd
Huntingdon Business Centre
Blackstone Road
Huntingdon
Cambridgeshire
PE29 6EF
United Kingdom
Tel: +44 (0) 1480 455114
Fax: +44 (0) 1480 455124
Email: [email protected]
Web: www.displaylite.co.uk
User’s Manual – DEFENDER
Document No: DEF-User-C
Contents
1.
Introduction
Using this manual
Features
01
01
01
2. Safety Precautions
Cleaning
02
02
3. Installation
05
05
05
06
06
06
Contents
Power cord
19” Rack mount
Panel mounting
Metal case
Open frame
Connecting the monitor
Signal source
Power
4. Operation
OSD (on screen display) controls
Keypad layout
OSD main menu & control function
How to use the OSD menu
5. Trouble shooting
06
08
08
08
08
08
09
10
10
No picture
Image persistence
Image is unstable
LED on monitor is not lit
LED on monitor is flashing
10
11
11
11
11
6. General information about LCD monitors
12
7. Specifications
13
8. Appendix
14
Standard display modes
Connector pin assignment
14
15
Page 1 of 15
1. Introduction
Using this manual
We recommend that you take a few minutes to read through the user’s
manual before installing and switching on your monitor. All chapter headings
and subheadings are listed in the table of contents.
The DEFENDER is a rugged state of the art flat panel TFT LCD monitor
designed to operate in demanding applications.
Features
High quality TFT colour LCD monitor
15 way HDD (VGA) analog Input. Optional: DVI-D (digital) & video
(composite and S-video)
Compatible with sync on green (SOG) and composite sync video signals.
On Screen Display (OSD) system
Wide viewing angle
Automatic set-up
Space saving, compact case design
Optional touchscreen (various technologies available)
Choice of: 19” rack mount, panel mount, metal case and open frame
Anti-reflective protective glass (excluding open frame). Optional:
Polycarbonate & laminated glass (excluding open frame)
Front panel designed to meet the sealing requirements of IP65 (rack/panel
mount versions)
Optional stainless steel front panel (rack/panel mount versions)
Extended temperature range
12VDC power input (supplied with external AC to DC PSU)
Designed and manufactured in the UK by Displaylite
2. Safety precautions
WARNING
If you notice anything abnormal while operating this product, such as smoke
or fumes, unplug the monitor and contact your supplier immediately. Further
use may be dangerous and could cause fire or electric shock.
NEVER REMOVE THE CASE
High voltage circuits! Removing the safety cover (or back) may expose you to
the danger of fire or electric shock. Refer servicing to qualified service
personal.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 2 of 15
DO NOT OBSTRUCT THE MONITOR
Do not obstruct or poke objects into the monitor as this may cause fire,
electric shock or damage.
OPERATE WITH THE SPECIFIED POWER SUPPLY
Only operate the monitor with the specified power supply. Use of an incorrect
voltage will cause malfunction and can result in fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the
monitor or any other heavy objects on the cables. If damaged, the cables may
cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunderstorm as the
continual breaks in power may cause malfunction. It is also advised not to
touch the plug in these circumstances as it may cause an electric shock.
PRECAUTI NS
INSTALLATION LOCATION (GENERAL)
Do not install the monitor where sudden temperature changes may occur, or
in humid, dusty or smoky areas as it may cause fire, electric shock or
damage. You should also avoid areas where the sun shines directly on the
monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
Ensure that you do not place any heavy objects on the monitor, and that all
cables are routed to avoid possible injury.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 3 of 15
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering
the slots may cause fire. Allow a 10cm space between the rear of the monitor
chassis and rear enclosure wall or panel to allow adequate air circulation.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor
and be sure the signal cable is disconnected. If you do not disconnect them, it
may cause fire or electric shock.
CAUTION!
The Power cable connection is the primary means of detaching the
system from the power supply. The monitor should be installed close to
a power outlet, which is easily accessible.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is
left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug.
Never pull on the cable itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright
background or in a dark room. For optimal viewing comfort, the monitor
should be just below eye level and 40-60 cm (16-24 inches) away from your
eyes. When using the monitor over a prolonged time, a ten-minute break
every hour is recommended as looking at the screen continuously can cause
eyestrain.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 4 of 15
Cleaning
To protect the LCD panel, protective glass or touch screen do not scratch or
rub the screen with a hard object.
Never use the following strong solvents. These may damage the enclosure
and the LCD screen.
Thinner
Benzene
Abrasive cleaner
Wax
Acid or Alkaline solvent
Stains can be removed with a cloth lightly moistened with a mild detergent
solvent. Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 5 of 15
3. Installation
Contents
The following accessories are included with the DEFENDER*. Check to see if they
are enclosed with your monitor. If anything is missing or damaged, please contact
Displaylite or your supplier.
UK AC power cord (optional Euro power cord)
VGA signal cable
Composite video & DVI-D (Video or DVI-D versions when ordered)
User’s manual
CD-ROM - Touch screen driver software (touch screen versions when ordered)
AC to 12VDC power supply (PSU) (enclosed within cradle)
Cradle for power supply (attached to rear of display)
* Remember to save your original box & packing material to transport or ship the
monitor.
Power cord
Use a power cord that matches the power supply voltage of the AC power
outlet being used. The power supply cord you use must have been approved
by and comply with the safety standards of your country.
UK
In UK, use a BS approved power cord with moulded plug having a black (5A)
fuse installed for use with this monitor.
Europe
Power cord type H05VV-F should be used.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 6 of 15
19” Rack mount
The DEFENDER RM (rack mount) is designed to be installed in a 19” EIA compatible
equipment rack and is mounted into the rack without the use of 19” rack mount slides
runners.
Panel mount
The DEFENDER PM (panel mount) is designed to be front mounted into a cut-out.
The front panel is secured by M4 studs and M4 nuts (not supplied).
Warning! Do not over tighten the M4 nuts as this can damage the studs.
Metal case
The DEFENDER MC (metal case) is designed to be free standing on a desk or wall
mounted using a suitable VESA compliant stand or bracket. The desk stand or wall
bracket is secured by 4 x M4 screws (supplied).
Open frame
The DEFENDER OF (open frame) is designed to be enclosed inside a kiosk or
console using the brackets provided with the monitor.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 7 of 15
Connecting the monitor
Rear view of the DEFENDER
Signal source
Ensure that both the signal source (PC, video camera, DVD etc) and the DEFENDER
monitor are switched off.
Connect the signal source to the DEFENDER monitor using the signal cable(s)
provided.
The select (input) button selects the correct input source e.g. VGA, CVBS, S-Video or
DVI-D.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 8 of 15
Touchscreen (optional)
Install the touchscreen software drivers provided on the CD-ROM, on to your PC.
Follow the installation instructions provided on the CD. Connect the touchscreen data
cable (USB or Serial RS232) provided between the DEFENDER and your PC.
Power
Connect the 12VDC power connector from the AC to 12VDC power supply (PSU) to
the DEFENDER monitor first. Then connect the AC power cable the PSU.
4. Operation
OSD (ON SCREEN DISPLAY) CONTROL BUTTONS
Depending on which version of the DEFENDER you purchased, the 5 control buttons
are mounted either on the front panel or rear case. NOTE: The orientation of the
buttons varies between front and rear mounted controls
Keypad layout
Front mounted OSD membrane (front mounted)
Down(Auto) Up(Auto) Sel(Input) Menu
Power
LED
Rear mounted OSD buttons (rear mounted)
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 9 of 15
Direct
Buttons
POWER
MENU (M)
Power On and Off
1. Enter into Main Menu or Exit out of Main Menu
2. Exit from Sub Menu to Main Menu
SELECT (S)
1. Move to next OSD Menu item on Main Menu or
Sub Menu.
2. Executes the OSD Menu item such as ‘Auto
Adjust’ on OSD Menu.
1. Enter from Main Menu to Sub Menu.
2. Select the control item to change the value of
selected menu.
UP (>)
Hot Buttons
DOWN (<)
3. Increases the value of selected OSD Menu item.
1. Decreases the value of selected OSD Menu
item.
UP+DOWN
(Auto Adjust)
1. Executes ‘Auto Adjust’ to optimise the picture
(Analog VGA input only)
SELECT (S)
1. Selects the signal input source (VGA, CBVS, SVideo or DVI-D)
OSD main menu & control functions
Main
Sub Menu
Menu
PICTURE Brightness
Contrast
H Position
V Position
Phase
Clock
Auto Adjust
COLOUR Colour Temp.
Red
Green
Blue
Auto Colour
Control Description
Adjust the brightness of the display.
Adjust the contrast of the display.
Adjust horizontal position of the displayed image.
Adjust vertical position of the displayed image.
Adjust pixel phase of the displayed image.
Adjust pixel clock of the displayed image.
Optimise all the picture adjustments automatically.
Change the colour tone of the display
Adjust the RED colour temperature.
Adjust the GREEN colour temperature.
Adjust the BLUE colour temperature.
Set the colour balance automatically (Analog VGA
only).
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 10 of 15
OSD
MISC
OSD
Position
H
OSD
Position
OSD Timer
V
Move the location of the OSD menu horizontally.
Move the location of the OSD menu vertically.
Specifies the time span before the OSD menu
Transparency
disappears.
Adjust the transparency of OSD Menu window.
Language
Select the OSD Language.
Recall
Input Select
(English, German, French, Spanish, Korean)
Recall (reset to) the default factory settings.
Select the current input source. (VGA & DVI-D
version)
How to use the OSD menu
e.g.) Adjust CONTRAST control on PICTURE main menu
a. Press <MENU> button on OSD membrane switch pad. (OSD Menu should
appear on the screen - PICTURE Main Menu)
b. Press <UP> Button to navigate to the Sub Menu. (Selected brightness sub
menu)
c. Press <SEL> key to go to the contrast Sub Menu.
d. Press <UP> key to enable the contrast value change (High-Lighted Value on
contrast Sub Menu)
e. Press <DOWN> key to decrease or press <UP> key to increase the adjust
value.
f. Press <MENU> key to disable the contrast value change.
g. Press <MENU> key to exit to Sub Menu and Press it again to exit the Main
Menu.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 11 of 15
5. Trouble shooting
The following information provides guidance notes for trouble shooting
No picture
Check correct signal input source has been selected.
The signal cable should be completely connected to the display
card/computer.
The display card should be completely seated in its slot.
Check the power to the monitor and computer is on.
Check to make sure that a supported mode has been selected on the
display card or system being used.
Check the monitor and your display card with respect to compatibility and
recommended settings.
Check the signal cable connector for bent or pushed-in pins.
Check the signal input.
Image persistence
Image persistence is when a ‘ghost’ of an image remains on the screen
after the monitor has been turned off. Unlike CRT monitors, LCD monitors’
image persistence is not permanent.
To alleviate image persistence, turn the monitor off for as long as an
image was displayed. For example, if an image was on the monitor for one
hour and a residual image remains, the monitor should be turned off for
one hour to erase the image.
Image is unstable or unfocused
Signal cable should be completely attached to the computer.
Use the OSD, image adjustment controls to focus and adjust display by
increasing or decreasing the clock and phase. When the display is
changed, the OSD image adjust settings may need to be re-adjusted.
Check the monitor and your display card with respect to compatibility and
recommended signal timings.
If your text is garbled, change the video mode to non-interlace and use 60
Hz refresh rate.
LED on monitor is not lit (no green or flashing green can be seen)
Power cord should be connected and power button on monitor keypad
should be pressed
LED on monitor is flashing green
Refer to NO PICTURE
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 12 of 15
Display image is not sized properly
Use the OSD image adjustment controls to increase or decrease the
H.SIZE.
Check to make sure that a supported mode has been selected on the
display card or system being used (please consult display card or system
manual to change graphics mode).
6. General information about LCD monitors
The
following symptoms are normal and do not indicate a problem.
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of display source that is used. Select auto adjust to
adjust the picture to its correct position.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
CIAL N LCD M NIT RS
Due to the nature of the backlight, the screen may flicker during initial use. Turn
off
the power to the monitor and then turn it on again.
If you have to return your unit for service and the original packaging has
been discarded, please contact Displaylite for advice or replacement
packaging.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 13 of 15
7. Specifications
MODEL
DEFENDER 31
DEFENDER 38
DEFENDER 43
DEFENDER 48
Screen Size
Type
Viewing Area
mm
Brightness
cd/m2
Aspect Ratio
Contrast Ratio
Viewing Angle
12.1” (31.0cm)
TFT
246.0 x 184.5
15.0” (38.0cm)
TFT
304.1 x 228.1
17.0” (43.0cm)
TFT
337.9 x 270.3
19.0” (48.0cm)
TFT
376.6 x 301.0
400
250
300
300
4:3
500:1
130° Horizontal/
110° Vertical
30 - 61
50 - 75
800 x 600 @75Hz
Power, menu, select,
up, down
Standard: 15pin D-type
Optional:
DVI-D, Video: RCA, &
S-video
4:3
450:1
130° Horizontal/
110° Vertical
30 - 61
50 - 75
1024 x 768 @75Hz
Power, menu, select, up,
down
Standard: 15pin D-type
Optional:
DVI-D, Video: RCA, & Svideo
4:3
1000:1
160° Horizontal/
160° Vertical
30 – 80
50 - 75
1280 x 1024 @75Hz
Power, menu, select, up,
down
Standard: 15pin D-type
Optional:
DVI-D, Video: RCA, & Svideo
12VDC
Supplied with external
110VAC – 240VAC
PSU
40
12VDC
Supplied with external
110VAC – 240VAC PSU
12VDC
Supplied with external
110VAC – 240VAC PSU
40
50
4:3
700:1
160° Horizontal/
160° Vertical
30 - 80
50 - 75
1280 x 1024 @75Hz
Power, menu, select,
up, down
Standard: 15pin Dtype
Optional:
DVI-D, Video: RCA, &
S-video
12VDC
Supplied with external
110VAC – 240VAC
PSU
60
0 to 50
0 to 50
0 to 50
0 to 50
10 to 80
(Non-condensing)
10 to 80
(Non-condensing)
10 to 80
(Non-condensing)
10 to 80
(Non-condensing)
TBC
RM: 482.6 x 310 x 70.7
PM: 420 x 340 x 70.7
MC: 359 x 299 x 68.9
OF: 357 x 295.5 x 67.9
RM: 482.6 x 355 x 70.7
PM: 475 x 405 x 70.7
MC: 384 x 338 x 68.9
OF: 382 x 336 x 67.9
TBC
RM/PM: 9.0
MC: 7.0
OF: 6.5
Standard: 3mm thick
Anti-glare
RM: 482.6 x 400 x
70.7
PM: 500 x 417 x 70.7
MC: 424 x 367 x 68.9
OF:357 x 366 x 67.9
RM/PM: 9.5
MC: 8.0
OF: 7.5
Standard: 3mm thick
Anti-glare
Frequency (H)
Frequency (V)
Max. Resolution
On Screen Menu
Signal Inputs
Power
Requirements
Power
Consumption
[W]
Temperature
(operating) [°C]
Ambient
Humidity
(operating) [%]
Dimensions
[mm]
(W x H x D)
Excluding PSU
Weight [kg]
Protective Glass
(without
touchscreen)
Touchscreen
Options
Standard: 3mm thick
Anti-glare
RM/PM: 7.0
MC: 5.6
OF: 5.0
Standard: 3mm thick
Anti-glare
Resistive, Capacitive or
Surface wave
USB or Serial controller
Resistive, Capacitive or
Surface wave
USB or Serial controller
Resistive, Capacitive or
Surface wave
USB or Serial controller
Approvals
Options
CE
24/48VDC power input
Customised versions
CE
24/48VDC power input
Customised versions
CE
24/48VDC power input
Customised versions
Resistive, Capacitive
or Surface wave
USB or Serial
controller
CE
24/48VDC power input
Customised versions
NOTE: Technical specifications are subject to change without notification.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 14 of 15
Appendix
Standard Display Modes
1
640 x 350
Horizontal
Vertical
Frequency Polarity Frequency Polarity
31.78 KHz
P
70.0 Hz
N
2
720 x 400
31.47 KHz
N
70.0 Hz
P
28.324 MHz
640 x 480
31.47 KHz
N
60.0 Hz
N
25.175 MHz
640 x 480
35.00 KHz
N
66.7 Hz
N
30.240 MHz
5
640 x 480
37.86 KHz
N
72.8 Hz
N
31.500 MHz
6
640 x 480
37.50 KHZ
N
75.0 Hz
N
31.500 MHz
7
800 x 600
35.16 KHz
N/P
56.3 Hz
N/P
36.000 MHz
8
800 x 600
37.88 KHz
P
60.3 Hz
P
40.000 MHz
800 x 600
48.08 KHz
P
72.2 Hz
P
50.000 MHz
10
800 x 600
46.87 KHz
P
75.0 Hz
P
49.500 MHz
11
832 x 624
49.73 KHz
N
74.6 HZ
N
57.284 MHz
12
1024 x 768
48.36 KHz
N
60.0 Hz
N
65.000 MHz
1024 x 768
56.49 KHz
N
70.1 Hz
N
75.000 MHz
14
1024 x 768
60.02 KHz
P
75.0 Hz
P
78.750 MHz
15
1280 x
1024
63.97 KHz
P
60.0 Hz
P
108.050
MHz
79.98 KHz
P
75.0 Hz
P
135.000
MHz
No
3
4
9
13
16
Mode
VGA
SVGA
XGA
SXGA
Resolution
1280 X
1024
Pixel clock
25.175 MHz
Note: 1. Modes 15 – 16 apply to the DEFENDER 43 & 48 only. DEFENDER 38
Modes 1 – 14. DEFENDER 31 Modes 1 – 10.
User’s Manual – DEFENDER
Document No: DEF-User-C
Page 15 of 15
Connectors pin assignment
15 Pin D-SUB Connector
1
Red
9
+5V
2
Green (SOG in)
10
Ground - Sync
3
Blue
11
No Connection
4
Ground
12
DDC Serial Data
5
Ground
13
Horizontal or Composite
Sync
6
Ground - Red
14
Vertical Sync
7
Ground - Green
15
DDC Serial Clock
8
Ground - Blue
DVI-D Connector (optional)
1
2
TMDS Data 2TMDS Data 2+
14
15
+5V Power
Ground (for +5V)
3
TMDS Data 2/4
Shield
TMDS Data 4TMDS Data 4+
16
Hot Plug Detection
17
18
TMDS Data 0TMDS Data 0+
DDC Serial Clock
DDC Serial Data
No Connect
TMDS Data 1-
19
20
21
22
TMDS Data 0/5 Shield
TMDS Data 5TMDS Data 5+
TMDS Clock Shield
11
TMDS Data 1+
TMDS Data 1/3
23
24
TMDS Clock+
TMDS Clock-
12
13
Shield
TMDS Data 3TMDS Data 3+
C5
Ground
4
5
6
7
8
9
10
User’s Manual – DEFENDER
Document No: DEF-User-C