Honda CR-Z 2016 Owner Manual

16 CR-Z NAVI-31SZT8500.book 0 ページ２０１５年７月３０日　木曜日　午前９時１８分

The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd., reserves the right, however, to discontinue or change specifications or design at any time without notice and without incurring any obligation.

Accessories Precautions

The GPS antenna is located in the dashboard. Metallic front or side window tinting can seriously degrade or obstruct GPS reception.

Signal noise from devices such as radar detectors, vehicle tracking devices, remote starters, and additional amplifiers can disrupt the navigation system. If you install any such item, install it away from the navigation display and antenna.

Important Safety Information

3

WARNING

Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

Only operate system controls when the conditions permit you to safely do so.

Avoid focusing on the screen or manually operating the system controls while driving.

Certain on-screen controls are disabled when driving, however, most of the voice commands continue to function. Pull to the side of the road if you need to devote more attention and time to look at the screen or access additional menus.

Route guidance may conflict with street closures, road construction, detours, and out-of-date map data.

The system itself may also have limitations. Verify route information by carefully observing roads, signs, and signals. Always use your own judgment and obey traffic laws.

2

System Limitations P. 222

NOTICE

This vehicle’s navigation display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.

Clean the screen with a soft, damp cloth. You may use a mild cleaner intended for use on navigation screens.


2 System Setup P. 21

Start-up 22

Routing 40

Display Settings 67

Other Settings 78

2 Navigation P. 81

Entering a Destination 82

Changing Your Route 113

Voice Control System 24

Guidance 48

Sound and Beep Settings 69

Data Reset 80

Calculating the Route 100

Changing Your Destination 122

Display Mode Settings 27

Map 51

Voice Recognition Settings 71

Driving to Your Destination 102

Resuming Your Trip 125

2 Audio P. 127

Audio System 128

Playing a Disc 138

Playing Bluetooth® Audio 158

Audio Remote Controls 130

Audio Settings 132

Playing an iPod 143

Playing a Video Using the HDMI TM 162

Playing Pandora® 151

2 Bluetooth® HandsFreeLink® P. 165

Bluetooth® HandsFreeLink® 166

Text/E-mail Message 190

HondaLink Assist 193

2 Other Features P. 195

Trip Computer 196

Information Functions 197

2 Troubleshooting P. 203

Troubleshooting 204

Error Messages 212

Multi-View Rear Camera 200

2 Reference Information P. 219

System Initialization 220

System Limitations 222

2 Voice Commands P. 231

Voice Commands 232

Customer Assistance 224

Personal Information 29

System Settings 65

Clock Adjustment 72

Map Menu 107

Playing FM/AM Radio 134

Playing a USB Flash Drive 154

Legal Information 227

Contents

Quick Reference Guide

P. 2

System Setup

P. 21

Navigation

P. 81

Audio

P. 127

Bluetooth® HandsFreeLink®

P. 165

Other Features

P. 195

Troubleshooting

P. 203

Reference Information

P. 219

Voice Commands

P. 231

Index

P. 243

2


Quick Reference Guide

Overview—Functions at a Glance

Navigation

You can select any place/landmark as a destination by using voice control or the touch screen. The navigation system gives you turn-by-turn driving directions to your destination.

Store home addresses

(P35)

Register

2

home addresses.

Store contacts

(P30)

Store up to

200

contacts in

2

address books.

Enter destination

(P82)

Select your destination using

11

methods.

Select route

(P101)

Set route preferences and select one of

3

routes.

Track route

(P102)

Follow your route in real-time with voice guidance.

Traffic Information *

(P111)

View and avoid congestion and traffic incidents.

*: Available only in certain areas.

Avoid certain areas

(P121)

Set streets and areas to detour around.

Add waypoints

(P114)

Add up to

4

“pit stops” along your route.


Audio

The advanced audio system provides clear, well-defined sound and makes the most of your music.

Enjoy listening to a variety of audio sources, such as:

AM/FM Radio

(P134)

Compact Disc

(P138)

iPod

(P143)

Pandora®

*

(P151)

USB Flash Drive

Bluetooth®

(P154)

Audio

(P158)

Voice Control

(P24)

Use voice commands to control the system while driving. You can operate all key functions of the navigation, audio, Bluetooth® HandsFreeLink®, and climate control systems * .

*: Climate control voice commands are only available on some Canadian models.


(P166)

Pair a compatible cell phone to receive incoming and make outgoing calls. You can operate the phone features without ever taking your hands off the wheel.

Text Messages

(P190)

Receive text messages on the navigation screen from a compatible device and hear them read aloud.

Reply to them using preloaded messages.

Other Features

Multi-View Rear Camera (P200)

Helps you check for obstacles around the rear of your vehicle on the navigation screen when reversing.

*: Pandora® is available on U.S. models only.

3


System Controls

1

(Audio Power) Button

(P10)

7

HOME Button

(P8)

8

VOL (Volume) Button

(P10)

9

MENU Button

0

BACK Button

Navigation Screen (Touchscreen)

3

Disc Slot

(P138)

4

6

Microphone

(P24)

2

(Eject) Button

5

(Display Mode) Button

(P27)

4

(CLOSE) Button

(P138)

Audio Common

Voice Control


16 CR-Z NAVI-31SZT8500.book 5 ページ２０１５年７月３０日　木曜日　午前９時１８分 lb

MODE Button

(P130)

lc

(Volume) Button

(P131)

ld

(Channel) Button

(P131)

le

(Pick-Up) Button

(P185)

lf

(Talk) Button

(P24)

lg

(Hang-Up/Back) Button

(P185)

5

6


Voice Control Operation

Voice Portal Screen

a Press and release the (Talk) button on the HOME screen or the top screen of any mode.

The system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt.

 The audio system is muted during voice control mode.

 You can use other voice commands on the Voice Portal screen.

Voice Commands (P231)

commands for the current screen. A voice help tutorial is also available.

Voice Help (P16)

 Set Voice Prompt to Off to bypass the voice prompt.

Voice Recognition (P25)

 Carefully read the usage note for the voice control.

Voice Control System (P24)

 The system beeps when ready for a command. Press the

Back) button to cancel.

(Hang-Up/

 Available voice commands are highlighted on the screen.

b Say a voice command (e.g., Address).

After that, follow the voice prompt and say a voice command.

On the Menu Screen

a Press and release the (Talk) button on the menu or setting screen.

The system prompts you to say a voice command and gives examples. Press and release the (Talk) button again to bypass this prompt.

Available voice commands are highlighted on the screen.

b Say a voice command.

Voice Portal on any screen.

commands for the current screen. A voice help tutorial is also available.

Voice Help (P16)


Touchscreen Operation

You can operate the system using your finger on the touchscreen.

The touchscreen can be operated if you are wearing thin gloves, but it may be more difficult for the system to respond.

Tap

Touch the screen lightly with your finger to select an item on the screen.

Slide

Move your finger slowly across the screen to scroll the map.

Flick

Lightly sweep your finger side to side or up and down to scroll a list or map.

Pinch In/Out

Open or close your fingers on the screen in a pinching motion to zoom in or out of the map.

7

8


HOME Screen

The system displays various functions from the HOME screen. Select HOME at any time to return to the main HOME screen.

The position of the icons on the HOME screen can be changed.

(P66)

Info

View system information, the trip computer, and more.

Phone

(P165)

Display the phone screen and use a Bluetooth-compatible phone to make and receive calls.

Navi

(P81)

Display the map screen and operate the navigation system.

HondaLink Apps

You can connect a compatible smartphone to the system to enable integration between the smartphone's approved apps and the vehicle. This allows you to control the phone through the vehicle display. When a smartphone is connected, select on the HOME screen to display the app launcher screen.

HOME

Display the HOME screen.

VOL (Volume)

Increase or decrease audio volume.

MENU

Display the menu screen of each function.

BACK

Go back to the previous screen.

Audio

(P10) (P127)

Display the audio control screen. Play various music media such as the radio,

CD, and iPod.

Settings

(P21)

Change settings for functions in the system.

Connect

Display the HondaLink screen.

Select an icon to launch the app.

 To check smartphone compatibility and connection instructions:

U.S.: visit handsfreelink.honda.com.

Canada: visit www.handsfreelink.ca.

 To get more information on HondaLink features and apps:

U.S.: visit www.hondalink.com.

Canada: visit www.honda.ca/hondalink.

Sample images shown.


How to Enter Information

You can enter information (e.g., city names, street names, personal names, and business names comprising letters, numbers, and symbols) when prompted on input screens by two different methods.

Using Voice Control

When you see in this manual, voice commands are available for that feature.

 Say the letter, number, or symbol (e.g., say “A”).

 Use spelling assist (e.g., say “Apple” to enter the letter “A”

 The system beeps if you say an unavailable (grayed out) letter or number.

 If a voice command is not recognized, a list is displayed with possible options.

Using the Touchscreen

Select a character or icon on the screen to select it.

 Select to remove the last entered character.

 Select Shift to display upper/lower case characters.

 Select Space to enter a space character.

 Select a tab to display other types of characters.

 Select to change the keypad type. You can enter a character with flick input as well.

Number of Hits

On list screens:

 Say the number of the list item (e.g., say “Five” to select item

5).

 Say “Previous” to scroll up one page.

 Say “Next” to scroll down one page.

On input search screens, the number of hits in the map database is displayed. Select OK to display a list of possible entries.

On list screens:

Certain touchscreen functions are limited or inoperable while the vehicle is moving. For these functions, use available voice commands or pull over to proceed.

9


Audio System

You can play music from a wide array of media sources. You can also control the audio system using voice commands.

Basic Operation

a Press the (Audio Power) button to turn the audio system on or off.

b Select HOME and then select Audio on the screen.

The audio control screen of the last selected source is displayed.

c Select SOURCE and then select the audio source.

Audio source

Audio Control Display

Audio source

Displays selected source.

Displays or hides the music information.

Close tab

Folder/Track tab

Displays the list.

Track list d Select VOL (Volume) to adjust the volume.

Play mode

Music information

Open tab

Audio control

10

How to access the disc slot

 Pressing the (Eject) button tilts the screen down.

 Pressing the (CLOSE) button to return the screen to the upright position.


Map Screen Legend

Map scale

(P60)

Map orientation

(P56)

North up

Heading up

3D map

Traffic incident icons *

(P111)

Congestion

Incident

Weather

Construction

Road Closed/Blocked

Current map scale

GPS signal strength

Best reception

Good reception

No icon: Poor/No reception

Feature areas

Park

Hospital

Shopping Mall

Golf Course

Airport/Business

Water Area

Cemetery

University

Industrial complex

Military Base

Traffic status indicator *

(P111)

Traffic information available

Flow or incident data not available

Traffic information not available

Traffic information off or map scale too large

Current vehicle position

Map menu

(P107)

(P64)

Current street name

Traffic flow indicator *

(P111)

Heavy

Moderate

Free flow

Streets

Freeways

State routes

Verified streets

Unverified streets

One-way streets

Landmark icons

(P61)

Acura dealer

Honda dealer (U.S.)

Honda dealer (Canada)

ATM

School

Parking lot

Parking garage

Grocery store

Hotel/Lodging

Gas station

Hospital

Post office

Restaurant

Freeway exit information

*: Traffic is only available in certain areas.

11

12


During Route Guidance

During route guidance, route information is displayed on the map/guidance screen.

Select the map orientation icon to change the guidance mode.

Map Screen

Calculated route

(P100)

Straight line guide

(P57)

Estimated time to destination

Distance to destination

Distance of the actual route.

Guidance Screen

Guidance indicator

Distance to the next guidance point.

Calculated route

(unverified roads)

(P104)

Destination/Waypoint icon

(P114)

Street name of guidance point

Distance to guidance point

Map Screen during Scrolling

Select the open/close tab to view and select map icon and street or traffic information. Select the (Navi/Back) icon to go back to the map screen.

(P123)

List open/ close tab

Selectable icons on the cursor location

No entry icon


Navigation—Home Addresses and Going Home

The “Home” feature automatically routes you to your home address from any location simply by selecting Go Home 1 or 2, or saying

“Go Home.” You can store two home addresses.

(P35)

Storing Your Home Address

a Select HOME.

f Enter a name and select OK.

Going Home

a Select HOME and then select Navi.

b Select Settings and select Navigation.

c Select Personal Info tab.

d Select Edit Go Home 1.

e Select Name.

b Select MENU and then select Go

Home 1.

g Select Address.

h Select Address from the Destination menu.

i Enter an address.

j Select Phone No. k Enter a phone number and select OK.

Alternatively, you can say “Go Home” from any screen. Your home address is displayed on the calculate route screen.

c Select Set as Destination.

l Select OK.

13

14


Navigation—Entering a Destination

Enter your destination using one of several methods, then follow route guidance on the map or guidance screen to your destination. You can also perform these steps using voice control.


b Select MENU and then select Address.

e Select your destination street from the list.

h Select Set as Destination.

Route guidance to the destination begins.

f Enter the street number. Select OK when finished.

 View Routes: Choose one of three routes.

c Select Street.

d Enter the name of your destination street and select OK if necessary.

g If there is more than one city with the specified street, a list of cities is displayed. Select the desired city from the list.

 Route Preference: Choose MAX or MIN for the four settings.


Navigation—Changing Route or Destination

You can alter your route by adding waypoints to visit, adding streets to avoid, or changing your destination during route guidance.

Adding a Waypoint (“Pit Stop”)

You can add up to four waypoints along your route.

(P114)


b Select MENU and then select

Destination List on the Route Option tab.

c Select Add New Destination.

d Select search method.

e Select the location to add to the

Destination List.

f If necessary, edit the order of the destinations.

Changing Your Destination

There are four methods you can use to specify a new destination during route guidance.

 Say

(P122)

Searches for the nearest place/landmark on the map screen (e.g., “Find

nearest gas station”).

 Say

(P13)

Routes to your home address.

 Selecting an icon on the map

(P123)

Scroll the map to position the cursor over a place/landmark icon or a new area on the map. Select the highlighted icon on the right side of the screen, and then select Set as Destination.

 Entering a new destination

(P124)

Select MENU on the map screen. Select

Destination tab and enter a new destination.

Canceling Your Route


b Select MENU and then select Cancel

Route.

From the map screen:


b Select (map menu) icon.

c Select Cancel Route.

15


Voice Help

This navigation system comes with voice help, which shows you what command to say when using the voice command functions.

Command Help

a Press and release the (Talk) button.

e Press and release the (Talk) button.

f Say one of the options for a list of available commands by category (e.g.,

“Find place commands”).

Getting Started Tutorial

voice help screen.

16

The voice help screen is displayed.

available on most screens.

c Press and release the (Talk) button.

d Say one of the options for a list of available commands by category (e.g.,

“Navi commands”).

g The system displays a list of all available commands for the category.

Select Read to hear the list read aloud.

Voice Commands

(P231)

The system starts to read the tutorial automatically.

 Select Stop or select BACK to stop reading.

 Say “Next” to display the previous/next page.

 You can also display the All commands screen from the Info Menu. Select

Voice Info on the Info Menu screen.


Troubleshooting

Why does the vehicle position icon on the map “lag” a short distance behind my actual position, especially at intersections?

This is normal. The navigation system is unaware of the width of intersections. Large differences in vehicle position can indicate a temporary loss of the GPS signal.

Why does the “time to destination” display sometimes increase even though I am getting closer to my destination?

The “time to destination” is based on the posted road speed signs and your actual road speed to give you a better estimate of arrival time.

How do I specify a destination when an entered city or street could not be found?

Try entering the street first. Some cities are lumped in with a major metro area. In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.

For more Information

(P203)

How do I turn on the navigation system voice guidance?

1.

Select HOME and then select Settings. Select System, and then select Sound/Beep tab. Check that Volume is not set to 00.

2.

Select Voice Recog tab on the System settings screen, and set Voice Prompt to On if you want the system to provide confirmations and system prompts.

My battery was disconnected or went dead, and the navigation system is asking for a code. Where do I find it?

In most cases, you do not need to enter a code. Simply press and hold the (Audio Power) button for two seconds; the system should reactivate.

2 System Initialization P. 220

How can I check if my smartphone is compatible with the system?

Visit the following website:

● U.S.: handsfreelink.honda.com.

● Canada: www.handsfreelink.ca.

17


How to Use This Manual

This section explains different methods on how you can easily find information in this manual.

18

Searching the Table of Contents

(P1)

Two types of Tables of Contents help you find your desired information.

More Detailed

Contents

Table of Contents

First, find the general chapter related to what you are looking for (e.g., entering a destination from the Address Book).

Then, go to that chapter to view a more specific table of contents.

Chapter Contents

This more detailed table of contents shows you exactly what information is listed by section and title.

Searching the Index

(P243)

Menu items displayed on the navigation screen (e.g., Address Book) can be found individually in the Index.

Navigation Screen

Index

The Index consists of main terms and subentries. The sub-entries help you get to the desired page depending on what you are looking for.

Go to the

Next Page


After following the menu tree, step-by-step instructions explain how to achieve the desired result.

Menu Tree

The menu tree helps guide you through the system’s menu options.

To get to your desired function, follow the menu tree in order of the steps shown.

HOME Navi MENU Address Book

All menu options can also be activated with voice commands.

Select the item on the system control panel.

Select HOME.

* Sample pages and images in this section may differ from the actual ones.

Select the menu option.

Select Address Book.

19

20



System Setup

This section describes the start-up procedure and the navigation and setup functions.

Start-up ................................................... 22

Voice Control System ............................. 24

Command Input .................................... 24

Voice Recognition .................................. 25

Siri Eyes Free .......................................... 26

Display Mode Settings ........................... 27

Turning Off the Display .......................... 27

Switching Display Mode Manually .......... 27

Personal Information.............................. 29

Address Book......................................... 30

Home Addresses .................................... 35

PIN Number ........................................... 36

User Name ............................................. 37

Previous Destination............................... 38

Category History .................................... 39

Routing .....................................................40

Route Preference ....................................41

Unverified Routing ..................................42

Traffic Rerouting .....................................44

Edit POI Search Radius Along Route ........45

Avoided Area ..........................................46

Guidance ..................................................48

Map...........................................................51

Showing Icons on the Map .....................53

Color ......................................................55

View (Map Orientation)...........................56

3D Angle Adjustment .............................57

Straight Line Guide .................................57

Current Location .....................................58

Map Legend ...........................................59

Off-road Tracking................................... 63

Correct Vehicle Position ......................... 64

System Settings ...................................... 65

Display Settings ...................................... 67

Display ................................................... 67

Background Color .................................. 68

Sound and Beep Settings ....................... 69

Voice Recognition Settings .................... 71

Clock Adjustment.................................... 72

Clock Type ............................................. 73

Wallpaper Settings ................................. 74

Adjust Time............................................ 77

Resetting the Clock Settings ................... 77

Other Settings......................................... 78

Data Reset ............................................... 80

21

22


Start-up

The navigation system starts automatically when you set the power mode to

ACCESSORY or ON. At start-up, the following Confirmation screen is displayed.

Select OK.

u The HOME screen is displayed.

u If you do not select OK, the HOME screen is displayed after a certain period of time.

1

Start-up

Do not use the smartphone while driving.

Avoid focusing on the screen and drive safely following the actual traffic restrictions.

If the navigation system loses power at any time, you may need to press and hold the (Audio Power) button for more than two seconds, or you may be prompted for the 5-digit security code.

2 System Initialization P. 220

You can change the system language at any time.

2 Language P. 79

OK on the Confirmation screen cannot be selected by using a voice command.

If Remember Last Screen is set to On, the top screen of the last mode is displayed after the HOME screen.

2 Other Settings P. 78


■

Limitations for Manual Operation

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed out option until the vehicle is stopped.

Voice commands are still operable while the vehicle is in motion.

Disabled option uu Start-up u

23

24


Voice Control System

Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. You can also control the audio and climate control system * , and make and receive phone calls using Bluetooth® HandsFreeLink®.

The voice control system uses the (Talk) and (Hang-Up/Back) buttons on the steering wheel and microphones at the bottom of the navigation screen.

A “Getting Started” feature provides a tutorial that explains how to use the voice control system.

2 Voice Help P. 16

1

Voice Control System

When you press the (Talk) button, a helpful prompt asks what you would like to do. Press and release the (Talk) button again to bypass this prompt and give a command.

* Climate control voice commands are only available on some Canadian models.

Command Input

If the system does not understand a command or you wait too long to give a command, the system asks you to repeat the command.

When you give a command, the system generally either repeats the command as a confirmation or asks you for further information. If you do not wish to hear this feedback, you can turn it off. However, listening to the feedback will help familiarize you with the way the system expects commands to be phrased.

2 Voice Recognition Settings P. 71

On character input screens, a list of possible characters is displayed if the system does not recognize your command.

You can find out which voice commands are available for a particular screen using

1

Command Input

The audio system is muted while using the voice control system.

commands to you.



Voice Recognition

To achieve optimum voice recognition when using either the navigation voice control system or Bluetooth® HandsFreeLink®:

• Make sure the correct screen is displayed for the voice command that you are using.

2 Voice Commands P. 232

• Close the windows.

• Adjust the dashboard and side vents so air does not blow onto the microphones at the bottom of the navigation screen.

• Speak clearly in a natural speaking voice without pausing between words.

• Reduce any background noise if possible. The system may misinterpret your command if more than one person is speaking at the same time.

• Refer to the Voice Help tutorial.


uu Voice Control System u Voice Recognition

25

26

16 CR-Z NAVI-31SZT8500.book 26 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Control System u Siri Eyes Free

Siri Eyes Free

When your iPhone is paired and linked to the system via Bluetooth®, you can say Sirirelated commands. Make sure Siri on your iPhone is turned on.

2 Pairing a Phone P. 168

1. Press and hold the (Talk) button for more than two seconds until you hear the Siri tone.

2. Talk to Siri.

u When you hear the Siri tone, you can continue to respond without pressing any button. If the Siri tone times out, you have to press and hold the

(Talk) button again to reactivate

Siri Eyes Free.

u Press the (Hang-Up/

Back) button to cancel Siri Eyes

Free.

1

Siri Eyes Free

iPhone and Siri are trademarks of Apple, Inc.

Siri Eyes Free is available only on iPhone with iOS 6.0 and above.

Some commands work only on specific phone features or apps.

Some features may not be available for all countries or all areas. For details about Siri, refer to

http://www.apple.com.

We recommend against using Siri other than in Eyes

Free mode while operating a vehicle.

On Siri Eyes Free, the display remains the same and no feedback or commands appear.

While using Siri, you cannot operate the system with the built-in voice recognition.


Display Mode Settings

Turning Off the Display

Press the (Display Mode) button for more than two seconds.

u Select HOME or BACK, or press the (Display Mode) button to turn on the display.

1

Switching Display Mode Manually

The display brightness can be changed from the

System settings screen as well.

2 Display P. 67

Switching Display Mode Manually

Set the screen brightness separately for Day and Night modes. Press the

(Display Mode) button to cycle through the display modes (Day to Night to Off).

Press the (Display Mode) button.

u The Brightness bar is displayed for a few seconds.

u Select or to adjust the brightness.

You can also adjust the display brightness by sliding or flicking on the bar.

The map color is also switched depending on the Day and Night mode. The map color can be set on the

Navigation settings screen.

2 Color P. 55

Illumination control

button

Priority

1

Operation

Selects Day or Night display mode when the user wants to change the brightness of the display temporarily.

Remember: This button overrides all other display brightness adjustments either set automatically by the sunlight sensor or manually from the System settings screen.

Continued 27

28

16 CR-Z NAVI-31SZT8500.book 28 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Display Mode Settings u Switching Display Mode Manually

Illumination control

Sunlight sensor

(see your

Owner’s

Manual for location)

Priority

2

Dash illumination adjustment knob (see your

Owner’s

Manual for location)

Headlights

(Auto/On/Off)

3

Operation

If the sunlight sensor detects daylight and the headlights are turned on, the system automatically overrides the Night display and displays the Day display mode.

Remember: If desired, use the (Display Mode) button to override this automatic choice.

When the headlights are turned on, and you wish to have the Day display mode, adjust the illumination to the full brightness (beeps).

Remember: Adjust the dash brightness back to midrange to allow auto switching by sensing the headlights are on or off.

Screen color choice

4 When turned on, the display changes to Night display mode. The previous three controls listed above can

“cancel” this function.

Remember: Use the (Display Mode) button, or adjust the dash illumination to full brightness, to set the display to your desired choice.

N/A The user can select the color of the screen that will be displayed for the Day and Night display modes described above.

Remember: For best contrast, ensure that the map color is white for Day and brown for Night.


Personal Information

H HOME u Settings u Navigation u Personal Info tab

Use the personal information menu to select and set your address books, home addresses, and PINs. You can also delete previously routed destinations and previously selected categories.

Select an item.

The following items are available:

• Address Book: Stores new addresses or edits your address book.

2 Address Book P. 30

• Edit Go Home 1: Sets or edits your home address.

2 Home Addresses P. 35

• Edit Go Home 2: Sets or edits another home address.

2 Home Addresses P. 35

• PIN Number: Sets or changes your PIN.

2 PIN Number P. 36

• Previous Destination: Deletes the destination history.

2 Previous Destination P. 38

• User Name: Sets or changes your user name.

2 User Name P. 37

• Category History: Deletes the category history.

2 Category History P. 39

29

30

16 CR-Z NAVI-31SZT8500.book 30 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Personal Information u Address Book

Address Book

H HOME u Settings u Navigation u Personal Info tab u Address Book

Store up to 200 address entries in two address books (Driver 1 and Driver 2). You can add, edit, and delete information in the address books.

Select the driver to edit the address book.

u The address book is displayed.

u Select the category tab to display only the addresses in the selected category.

1

Address Book

The number of addresses is shared by the two address books. For example, if Driver 1 has 150 addresses, Driver 2 can only have 50.

If you have PIN-protected your address book, enter your PIN when prompted. Select OK. PINs are optional.


Any address book categories you create are also displayed on the Address book screen.

2 Selecting an Address Book Category P. 33


■

Adding an Address Book Entry


This section explains how to enter the name and address.

1. Select the driver to add the new address.

2. Select Add New Address.

1


If you do not give the address a name, one is automatically assigned (e.g., Address 001). You can re-enter, edit, or make changes to any entry.

“Address” is the only required field.

3. Select an item.


• Name: Edits the name of the entry.

• Address: Edits the address of the entry.

• Phone No.: Edits the phone number of the entry.

• Category: Specifies the category of the entry.

Continued 31

32


4. Select Name.

5. Enter a name or title. Select OK.

6. Select Address.

u Select an item for specifying the address.

7. Select OK when you are done creating the entry.

1


When you use Place Name, Place Phone Number or Place Category, the phone number is automatically entered.


• Address: Enter an address on the character input screen when prompted.

2 Address P. 84

• Place Name: Enter the name of a place/landmark.

2 Place Name P. 90

• Place Phone Number: Enter the phone number of a place/landmark.

2 Place Phone Number P. 92

• Place Category: Select a category to search for a place/landmark (e.g., Banking,

Lodging).

2 Place Category P. 93

• Previous Destination: Select a previous destination.


• Current Position: Select your current location.

• More Search Methods: Displays additional search method entries.

2 Entering a Destination P. 82


■

Editing an Address Book Entry


1. Select the driver and then select the address to edit.

2. Enter the name, address, phone number, and category fields.

2 Adding an Address Book

Entry P. 31

3. Select OK.

1

Editing an Address Book Entry

The entered contents are displayed on the Edit address screen.

■

Selecting an Address Book Category


1. Select the driver and then select an address.

2. Select Category.

3. Select BUSINESS, PERSONAL, or a category you created.

1

Selecting an Address Book Category

You can have a total of 100 categories (including

“Unfiled”). But these categories cannot be shared with two address books.

If you delete a category that is used by other addresses, the category type for those addresses changes to “Unfiled.”

Category Icons

The following icons can be selected for a category:

Continued 33

34


■ Creating a New Category

1. Select New Category.

2. Enter a name and select an icon when prompted. Select OK.

u The created category is displayed in the list of categories.

■ Deleting or Editing a Category

1. Select Edit or Delete.

2. Select a category and delete, or change the name and icon.

■

Deleting an Address Book Entry


1. Select the driver and then select the address to delete.

2. Select Delete.

3. Select Yes.

1

Deleting an Address Book Entry

When you transfer the vehicle to a third party, delete all address book entries.

16 CR-Z NAVI-31SZT8500.book 35 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Personal Information u Home Addresses

Home Addresses

H HOME u Settings u Navigation u Personal Info tab u Edit Go Home 1 or

Edit Go Home 2

Set two home addresses that you frequently use.

1. Edit the name, address, and phone number the same way as an address in the address book.

2 Adding an Address Book

Entry P. 31

2. Select OK.

1

Home Addresses

If you have PIN-protected your home addresses, enter your PIN when prompted. Select OK. PINs are optional.


If your home street is not in the system database, park on the nearest verified street to your home.

When entering the “Address” field, select Current

Position to use your current location as the home address.

You can delete a home address if necessary. Select

Clear Home Entry. Select Yes.

When you transfer the vehicle to a third party, delete all home addresses.

The home icon is shown on the map screen in the

5 mile (8 km) or less scales.

35

36

16 CR-Z NAVI-31SZT8500.book 36 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Personal Information u PIN Number

PIN Number

H HOME u Settings u Navigation u Personal Info tab u PIN Number

Set a 4-digit PIN for protecting personal addresses and your home addresses. Once you set a PIN, you are prompted to enter it whenever you access a personal address or a home address for the first time after setting the power mode to ACCESSORY or

ON.

1. Select the PIN to create.

2. Select the driver (when selecting

Address Book PIN).

3. Enter a 4-digit PIN.

4. Re-enter the new PIN when prompted to confirm the number you just enter.

u If you do not enter the same number both times, an

Incorrect PIN message is displayed. Enter your PIN again.

1

PIN Number

PIN

Personal Identification Number (PIN) is a password used to access some personal data.

PINs are optional. If you choose to use a PIN, keep a note of the number in a secure location. If you forget your PIN, contact your dealer. The factory default is no PIN.

Go Home PIN

Go Home PINs are the same for Driver 1 and Driver

2. If a Go Home PIN is set, it must be entered when:

• selecting Go Home for a destination

• selecting Home Address for editing

If you want to stop using a PIN, select Turn off PIN entry.


User Name

H HOME u Settings u Navigation u Personal Info tab u User Name

Change the user name (Driver 1 or Driver 2) to your desired name.

1. Select the driver name to change.

2. Enter a name. Select OK.

uu Personal Information u User Name

37

38

16 CR-Z NAVI-31SZT8500.book 38 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Personal Information u Previous Destination

Previous Destination

H HOME u Settings u Navigation u Personal Info tab u Previous

Destination

The navigation system maintains a list of your previously routed destinations as a shortcut for entering the same destination in the future. You can delete some or all of your previous destinations from the list.

1. Select the destination to delete.

u Repeat the procedure as necessary.

u Items to be deleted are indicated with a trash icon.

1

Previous Destination

Up to 50 destinations can be stored.

To cancel the selection of a previous destination, select the destination again.

Selecting Select All allows you to select all destinations.

Selecting Deselect All allows you to deselect all destinations.

2. Select OK to delete the selected destinations.

Trash icon

16 CR-Z NAVI-31SZT8500.book 39 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Personal Information u Category History

Category History

H HOME u Settings u Navigation u Personal Info tab u Category History

The navigation system maintains a list of your recently used place categories as a shortcut for selecting the same categories in the future. You can delete some or all of your recently used categories from the list.

1. Select the category to delete.


u Items to be deleted are indicated with a trash icon.

1

Category History

Up to 50 destinations can be stored.

To cancel the selection of a category, select the category again.

Selecting Select All allows you to select all categories.

Selecting Deselect All allows you to deselect all categories.

2. Select OK to delete the selected categories.

Trash icon

39


Routing

H HOME u Settings u Navigation u Routing tab

Choose various settings that determine the navigation system functionality during route calculation.

Select an item.

40


• Route Preference: Changes the route preferences (calculating method).

2 Route Preference P. 41

• Unverified Routing: Sets whether you use the route guidance in unverified areas.

2 Unverified Routing P. 42

• Traffic Rerouting: Sets whether you use automatic recalculation based on traffic information.

2 Traffic Rerouting P. 44

• Edit POI Search Radius Along Route: Sets the distance from the route to find waypoints.

2 Edit POI Search Radius Along Route P. 45

• Avoided Area: Specifies areas to avoid when calculating a route.

2 Avoided Area P. 46

16 CR-Z NAVI-31SZT8500.book 41 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Route Preference

Route Preference

H HOME u Settings u Navigation u Routing tab u Route Preference

Certain route preferences can be avoided or favored.

1. Select an item.

2. Select MIN or MAX.

3. Select OK.

1

Route Preference

The calculated route may not be the shortest route or the route you would choose. For safety reasons, the system generally applies the following rules to your route:

• Shortcuts through residential areas are avoided.

• Right turns are favored over left turns or U-turns.

• Time-restricted turns (turns prohibited at certain times of the day) are not used.

Check the ferry schedule when the calculated route includes ferry route.

On Canadian models, Highways is displayed instead of Freeways.

41

16 CR-Z NAVI-31SZT8500.book 42 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Unverified Routing

Unverified Routing

H HOME u Settings u Navigation u Routing tab u Unverified Routing

Receive turn-by-turn map and voice guidance in unverified areas.

Select On or Off.

1

Unverified Routing

Unverified roads are found in rural areas, and typically include residential streets away from the center of a town. They may not be accurate, and can contain errors in location, naming, and address range.

Straight line guide

42

Differences

On or Off?

Route calculation

Route line

Off

The driver wishes to manually navigate using the navigation map and choose the streets that lead to the destination.

Route is usually longer, using verified roads whenever possible.

The route line uses verified streets only (when possible).

If Straight Line Guide is set to

On, a pink vector line is displayed on map that continually points to your destination.

2 Straight Line Guide P. 57

On (factory default)

The driver chooses to let the navigation system suggest possible routing, knowing that the guidance may not be accurate.

Route is shorter, but uses unverified (purple) streets that may not be accurate.

A pink route line highlights suggested unverified streets on the map while traveling to your destination.

Pink route line


Differences

Cautionary messages

Off

Cautionary pop-up screens and voice announcements remind you to obey all traffic restrictions when starting route guidance, approaching an unverified area, and entering an unverified street.

On (factory default)

Cautionary pop-up screens and voice announcements remind you to exercise additional caution and obey all traffic restrictions when entering an unverified street.

Guidance

(map/voice)

There is no turn-by-turn map or voice guidance.

Voice guidance commands end with the phrase “if possible” to remind you to verify all traffic restrictions.

Directions list A direction list is typically not available. However, depending on your route, directions are provided to help you reach the first available verified road.

A direction list is provided showing unverified street names and turn symbols in pink.

uu Routing u Unverified Routing

43

44

16 CR-Z NAVI-31SZT8500.book 44 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Traffic Rerouting

Traffic Rerouting

H HOME u Settings u Navigation u Routing tab u Traffic Rerouting

A faster route can be calculated based on continuously updated traffic information.

2 Traffic Rerouting TM P. 111

Select an option.

1

Traffic Rerouting

You must be in or near a traffic-enabled city to receive coverage for that area. Traffic information is available in certain areas in the lower 48 states,

Hawaii, and some cities in Canada.

2 Traffic Information P. 226

Automatic traffic rerouting may not provide a detour route depending on circumstances.

The following options are available:

• On: The system reroutes automatically based on traffic information.

• Off (factory default): Disables the feature.

16 CR-Z NAVI-31SZT8500.book 45 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Edit POI Search Radius Along Route

Edit POI Search Radius Along Route

H HOME u Settings u Navigation u Routing tab u Edit POI Search Radius

Along Route

Select the distance from your highlighted route line (on either side of your route) that the system will search for a waypoint.

2 Adding Waypoints P. 114

You can specify a different search distance for freeways and surface streets.

1. Select an option.

2. Select a search distance.

3. Select OK.

1

Edit POI Search Radius Along Route

The search distance does not affect the search range used for the Find Nearest voice commands (e.g., say

“Find nearest gas station”).


• On Freeways: 1, 2, 5, or 10 miles (1.6, 3, 8, or 16 km) can be set. Factory default is 2 miles (3 km).

• On Surface Streets: 1/2, 1, 2, or 5 miles (800 m, 1.6, 3, or 8 km) can be set.

Factory default is 1/2 mile (800 m).

45

46

16 CR-Z NAVI-31SZT8500.book 46 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Avoided Area

Avoided Area

H HOME u Settings u Navigation u Routing tab u Avoided Area

Specify up to five areas to avoid (e.g., road construction, closures), if possible, when the system calculates routes to your destination.

1. Select New Area or an existing area to edit.

2. Select Name to label the area to avoid.

3. Enter a name or title. Select OK.

4. Select Area to define the area to avoid.

1

Avoided Area

The maximum size of an “avoid area” is 1/2 square mile (800 square meters).

If your selected area contains a freeway, you are asked “Would you like to avoid the portion of the freeway that runs through this area?”

Selecting No allows you to use a route through an avoid area on a freeway. The pop-up message appears when you calculate the route including the area.

You can select areas to avoid, however you cannot select roads or areas that you want the system to use for routing.

You can enter up to 25 characters for the name.

The following items are available (after an area is set):

• View Area: Displays the selected avoid area on the map.

• Delete: Deletes the selected avoid area.

16 CR-Z NAVI-31SZT8500.book 47 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Routing u Avoided Area

5. Select a method for specifying the area.

1

Avoided Area

The map scale can be changed at 1/4 mile (400 m) or less.


• Address: Specify the general area by entering an address.

2 Address P. 84

• Map Input: Specify the general area by map input.

2 Map Input P. 98

Avoid area

6. If you select Map Input, scroll the map to position the cursor over your desired area, adjusting the map scale as necessary. Select OK.

u To redo the area selection, select BACK.

size of the area you want to avoid.

Select OK.

8. Select OK.

or the u The area you specify is displayed in the list of areas to avoid.

47

48


Guidance

H HOME u Settings u Navigation u Guidance tab

Choose various settings that determine the navigation system functionality during route guidance.

Select an item.


• Guidance Mode: Sets whether to display only the map screen or a split map/guidance screen.

2 Guidance Mode P. 49

• Enhanced Voice Guidance: Sets whether to read out the place names along the route during voice guidance.

On: Voice guidance includes the place names along the route.

Off (factory default): Disables the feature.

16 CR-Z NAVI-31SZT8500.book 49 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Guidance u Guidance Mode

Guidance Mode

H HOME u Settings u Navigation u Guidance tab u Guidance Mode

Select the display mode for the map and guidance screens.


2. Select OK.

1

Guidance Mode

The guidance mode can also be selected from the map menu, or selecting the orientation icon.

2 Map Menu P. 107

You can also change the map orientation (north-up, heading-up, or 3D).

2 View (Map Orientation) P. 56

1 2 3


• 1 (Map) (factory default): Displays only the map screen. When you approach a guidance point, the next guidance point appears.

Map screen Next Maneuver screen

Near the next guidance point

Next guidance point

Continued 49

50

16 CR-Z NAVI-31SZT8500.book 50 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Guidance u Guidance Mode

• 2 (Direction List): Displays the map and direction list simultaneously on the map screen. When you approach a guidance point, the next guidance point appears.

Direction List screen Next Maneuver screen


Guidance direction list Next guidance point

• 3 (Next Maneuver): Displays the map and next guidance point simultaneously on the map screen.

Next Maneuver screen Next Maneuver screen


Next guidance point


Map

H HOME u Settings u Navigation u Map tab

Select the landmark icons to display on the map, change the orientation of the map, display your current location, and learn the meaning of the icons, colors, and symbols displayed on the map.

Select an item.


• Show Icon on Map: Selects the icons to display on the map.

2 Showing Icons on the Map P. 53

• Color (Day): Selects the color of the map for the Day mode.

2 Color (Day) P. 55

• Color (Night): Selects the color of the map for the Night mode.

2 Color (Night) P. 55

• View: Selects the map orientation (North-up, Heading-up, or 3D map).


• 3D Angle Adjustment: Adjusts the viewing angle for the 3D map.

2 3D Angle Adjustment P. 57

• Straight Line Guide: Sets whether to display a straight guideline to the destination or waypoint.


Continued 51

52

16 CR-Z NAVI-31SZT8500.book 52 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u

• Current Location: Displays and saves your current location.

2 Current Location P. 58

• Map Legend: Displays an overview of the map features.

2 Map Legend P. 59

• Off-road Tracking: Sets whether to display the tracking dots on the map.

2 Off-road Tracking P. 63

• Correct Vehicle Position: Adjusts the position of the vehicle on the map.

2 Correct Vehicle Position P. 64


Showing Icons on the Map

H HOME u Settings u Navigation u Map tab u Show Icon on Map

Select the icons that are displayed on the map.

1. Select an icon.

uu Map u Showing Icons on the Map

1

Showing Icons on the Map

You can display or hide the icons using voice commands on the map screen (e.g., say “Display

hospital”).

2 Map Display Commands P. 232

If there are no icons that can be fine-tuned, On is displayed instead of All On.

Select All On at the bottom of the screen to select all icons, and select All Off to deselect all icons.


u Repeat step 1 and 2 as necessary.

3. Select OK.


• All On: Displays the traffic or landmark icons.

2 Map Screen Legend P. 11


• Customize: Fine-tunes the icon display.

2 Fine-tuning the Icons P. 54

• Off: Hides the traffic or landmark icons.

Continued 53

54

16 CR-Z NAVI-31SZT8500.book 54 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u Showing Icons on the Map

■

Fine-tuning the Icons

H HOME u Settings u Navigation u Map tab u Show Icon on Map

Icons in some categories can be fine-tuned to display or hide.

1. Select an icon, and then select

Customize.

2. Select the icons to display on the map.

u Selecting toggles the icon display on or off.


3. Select OK.

1

Fine-tuning the Icons

Select All On to select all icons, and select All Off to deselect all icons.


Color

Set separate map colors for Day and Night modes.

■

Color (Day)

H HOME u Settings u Navigation u Map tab u Color (Day)

1. Select a color for the Day mode.

2. Select OK.

1

Color (Day)

The factory default is set to Beige.

uu Map u Color

■

Color (Night)

H HOME u Settings u Navigation u Map tab u Color (Night)

1. Select a color for the Night mode.

2. Select OK.

1

Color (Night)

The factory default is set to Blue.

55

56

16 CR-Z NAVI-31SZT8500.book 56 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u View (Map Orientation)

View (Map Orientation)

H HOME u Settings u Navigation u Map tab u View

Select the map orientation.


2. Select OK.


• North-Up: Displays the map with North always pointing up.

• Heading-Up: Displays the map so that the direction you are traveling is always

• pointing up.

3D Map: Displays the bird’s eye view map.

1

View (Map Orientation)

“Display Heading-up” (on Voice Portal screen),

“Display North-up” (on Voice Portal screen),

“Display 3D map” (on Voice Portal screen)

The map orientation can also be selected from the map menu, or by selecting the orientation icon.

The red arrow in the symbol always points North.

The heading-up view switches to the north-up view on map scales greater than 2 miles (3 km). The 3D map view switches to the north-up view on map scales greater than 5 miles (8 km).

The bird’s eye view map switches to the Heading-up map while scrolling the map.

The viewing angle for the bird’s eye view can be adjusted.



3D Angle Adjustment

H HOME u Settings u Navigation u Map tab u 3D Angle Adjustment

Adjust the viewing angle.

1. Select or to adjust the angle.

2. Select OK.

u You can also slide or flick the bar to adjust the angle.

Straight Line Guide

H HOME u Settings u Navigation u Map tab u Straight Line Guide

Set whether to display a straight guideline to the destination or waypoint.

Select an option.


• On (factory default): Displays the straight guideline on the map.

• Off: Disables the feature.

uu Map u 3D Angle Adjustment

57

58

16 CR-Z NAVI-31SZT8500.book 58 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u Current Location

Current Location

H HOME u Settings u Navigation u Map tab u Current Location

Display and save your current location for future use as a destination. The address, latitude, longitude, and elevation of your current location are displayed.

1. Select Address Book.

2. Select the user to save the location.

3. Edit the name, phone number, and category.


4. Select OK.

1

Current Location

“Display Current Location” (on Voice Portal screen)

You can also save the current location by saying

“Register the Current Location”, or selecting the vehicle icon on the map.

If you have PIN-protected your address book, enter your PIN when prompted. Select OK. PINs are optional.


Saving your current location does not change or cancel your current route.

16 CR-Z NAVI-31SZT8500.book 59 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u Map Legend

Map Legend

H HOME u Settings u Navigation u Map tab u Map Legend

See an overview of the map lines, areas, routes, traffic information, navigation icons.

Select an item.

u The system displays the map legend.

1

Map Legend

A visual guide helps you see the map legend.



Continued 59


60

■

Map Scale and Functions

The functions that are available from the map screen depend on the map scale.

Function page 1/20 1/8

Map Scale (top: mile, bottom: metric)

1/4 1/2 1 2 5 15 50 150 350 1000

80 200 400 800 1.6

3 8 24 80 240 560 1600

Icon display

Landmark icon

11

Exit info.

11

One-way traffic

11

Waypoint

“flag”

12

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ Traffic incident

11

Map orientation

Heading-up

North-up

56

56

56

✔

✔

✔

✔

✔

✔

✔

✔

✔

✔ ✔

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔

3D map

Others

Off-road tracking dots

63

✔ ✔ ✔ ✔

Unverified road

11

Map features

Avoid areas

Traffic speed

11

46

11

✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔

✔ ✔ ✔

✔ ✔ ✔ ✔ ✔ ✔ ✔

1

Map Scale and Functions

You can change the map scale using voice commands on the map screen (e.g., say “Display

2 mile scale”).

2 Map Scale Commands P. 233

You can change between miles or kilometers.


Traffic incident icons and traffic speed are only available in certain areas.


■

Map Icons and Functions

Display or hide all icons on the map screen, with the exception of Honda/Acura

Dealer icons which are always shown.

■ Landmark icon

Type

Honda/Acura dealer

Hospital

School

ATM

Fuel station

Restaurants

Post office

Grocery store

Hotel/Lodging

Police station

Shopping, Tourist attraction,

Bank

Parking garage

Parking lot

Freeway exit info.

Icon display control

Always on

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No icon

No icon

Yes

Yes

Yes

Icon selectable

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

No

Yes

Yes

Yes

Yes

Yes

No

Icon searchable

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

1

Map Icons and Functions

You can display or hide the icons using voice commands on the map screen (e.g., say “Display

hospital”).


Some icons, like police stations, are not shown, but you can still locate the nearest one with the Find

Nearest voice command (e.g., say “Find nearest

police station”).

2 Find Place Commands P. 233


Icons that can be displayed or hidden.


Icon selectable

Icons that can be selected as a destination.

Icon searchable

Icons that can be searched using the Find Nearest voice command.

Continued 61

62


■ Traffic icon

Traffic speed

Traffic incident

Type


Yes

Yes

Icon selectable

No

No

Icon searchable

No

Yes

1

Traffic icon

When you scroll the map and select the traffic incident icon, you can view a pop-up message describing the incident in detail.

Traffic icons are only available in certain areas.

16 CR-Z NAVI-31SZT8500.book 63 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u Off-road Tracking

Off-road Tracking

H HOME u Settings u Navigation u Map tab u Off-road Tracking

The navigation system can be set to display white off-road tracking dots

(“breadcrumbs”) on the map screen whenever you drive into an area approximately

1/2 mile (800 m) away from a mapped road.

Select an option.

1

Off-road Tracking

To clear existing breadcrumbs, set Off-road

Tracking to Off, exit the Settings screen, and then set Off-road Tracking to On again.


• On: The system displays the white tracking dots.

2 Driving Off-road P. 105

• Off (factory default): Disables the feature.

63

64

16 CR-Z NAVI-31SZT8500.book 64 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map u Correct Vehicle Position

Correct Vehicle Position

H HOME u Settings u Navigation u Map tab u Correct Vehicle Position

Manually adjust the current position of the vehicle as displayed on the map screen if the position appears to be incorrect. Make sure the vehicle is in Park.

1. Scroll the map to position the arrowhead at your correct position. Select OK.

2. Select or to position the arrowhead in the correct direction the vehicle is facing.

3. Select OK.

1

Correct Vehicle Position

An apparent position error can occur where buildings, tunnels, and other objects block or reflect the GPS signals, forcing the system to use “dead reckoning” to determine your location and direction.

Using this function to adjust vehicle position is not recommended. When the system reacquires a GPS signal, it will automatically place the vehicle in the correct location.

If you continually have to adjust the vehicle position, you may have problems with GPS reception or there may be database errors.

2 System Limitations P. 222


System Settings

H HOME u Settings u System

Select an item.

1

System Settings

Select All tab to see all items in a list.


• Home tab: Changes the setting for the HOME screen.

Home Screen Edit Order: Changes the position of icons on the HOME screen.

2 Home Screen Edit Order P. 66

• Display tab: Adjusts the screen’s preferences and changes the background color of the menu screen.

2 Display Settings P. 67

• Sound/Beep tab: Changes the system sound and beep settings.

2 Sound and Beep Settings P. 69

• Voice Recog tab: Changes the setting for the voice control system and modifies

Song By Voice and phonebook voice commands.


• Clock tab: Sets the automatic adjustment of the system clock for daylight saving and international time zones.

2 Clock Adjustment P. 72

• Others tab: Sets other basic settings for the system.


65

66

16 CR-Z NAVI-31SZT8500.book 66 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu System Settings u Home Screen Edit Order

Home Screen Edit Order

H HOME u Settings u System u Home tab u Home Screen Edit Order

Change the position of icons on the HOME screen.

Select and hold the icon and slide it to the position you want.


Display Settings

Display

H HOME u Settings u System u Display tab u Display Settings

Adjusts the screen’s preferences.

or the desired item.

u You can also slide or flick the bar to adjust the value.

2. Select OK.

1

Display

You can set separate daytime and nighttime settings for Brightness, Contrast, and Black Level. Adjust each setting when the display is in either daytime or nighttime mode.


• Brightness: Adjusts the screen’s brightness.

• Contrast: Adjusts the screen’s contrast.

• Black Level: Adjusts the screen’s black level.

67

68

16 CR-Z NAVI-31SZT8500.book 68 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Display Settings u Background Color

Background Color

H HOME u Settings u System u Display tab u Background Color

Changes the background color of the menu screen.

1. Select a color for the menu screen.

2. Select OK.


Sound and Beep Settings

H HOME u Settings u System u Sound/Beep tab

Changes the system sound and beep settings.

Select an item.


• Volume: Adjusts the navigation system volume level.

2 Volume Setting P. 70

• Verbal Reminder: Turns the verbal reminders on and off.

On (factory default): Sets the verbal reminders.

Off: Disables the feature.

• Beep Volume: Sets the beep volume to 1, 2 (factory default), 3, or Off.

69

70

16 CR-Z NAVI-31SZT8500.book 70 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Sound and Beep Settings u Volume Setting

Volume Setting

H HOME u Settings u System u Sound/Beep tab u Volume

1. Select or to adjust the volume.

u You can check the volume from the sound of the beep.

u You can also slide or flick the bar to adjust the value.

2. Select OK.

1

Volume Setting

If you set the volume to 00, you will not hear route guidance or voice command confirmation. However, if you then select Voice on the Map Menu, you will hear route guidance at the default volume.

2 Map Menu P. 107

Volume bar


Voice Recognition Settings

H HOME u Settings u System u Voice Recog tab

Select an item.


• Voice Prompt: Turns the voice prompt on or off.

On (factory default): Provides voice prompts when using the voice command system.


• Volume: Adjusts the voice prompt volume level.


• Song by Voice: Turns Song By Voice TM on or off.

2 Song By Voice TM (SBV) P. 148

On (factory default): Song by Voice commands are available.


• Song by Voice Phonetic Modification: Modifies voice commands for music stored in the iPod or USB flash drive.

2 Phonetic Modification P. 149

• Phonebook Phonetic Modification: Modifies voice commands for names in the phonebook.

2 Phonebook Phonetic Modification P. 178

• Automatic Phone Sync: Imports the phonebook and call history of the paired phone automatically.

2 Automatic Phone Sync P. 174

71


Clock Adjustment

72

H HOME u Settings u Clock/Info u Clock tab

Set the automatic adjustment of the system clock for daylight saving and international time zones.

Select an item.


• Clock/Wallpaper Type: Changes the clock display type and the wallpaper type.

2 Clock Type P. 73

• Clock Adjustment: Adjust the current time manually.

2 Adjust Time P. 77

• Clock Format: Sets the time notation to either 12-hour clock (12H, factory default) or 24-hour clock (24H).

• Auto Time Zone: The navigation system automatically adjusts the clock when driving through different time zones.

On (factory default): Adjusts the clock automatically.


• Auto Daylight: The navigation system automatically adjusts the clock (“spring ahead” or “fall back” by one hour) when a daylight saving time change occurs.

On (factory default): Adjusts the clock automatically.


• Clock Display: Sets whether to display the clock at the header of the screen.

1

Clock Adjustment

You can check the time and date from any screen using voice commands.

2 Global Commands P. 232

Auto Time Zone

If you live and work in two different time zones, you may want to turn Auto Time Zone to Off. When driving near a time zone boundary, the displayed time zone may fluctuate between the two zone times.

Auto Daylight

This function is not activated in areas that have not adopted daylight saving time, even if you have set

Auto Daylight to On.

16 CR-Z NAVI-31SZT8500.book 73 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Clock Adjustment u Clock Type

• Clock Location: Sets the location of the clock while playing a video through

HDMI TM .

• Clock Reset: Resets the settings of all items in the Clock settings.

Clock Type

H HOME u Settings u Clock/Info u Clock tab u Clock/Wallpaper Type u Clock tab

Set the design of the clock.

1. Select an option to change the design.

2. Select OK.

1

Clock Type

Even though the time on the clock screen is based on

GPS, some errors may be observed.

73

74

16 CR-Z NAVI-31SZT8500.book 74 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Clock Adjustment u Wallpaper Settings

Wallpaper Settings

Select, delete, and import wallpaper pictures for display on the screen.

■

Import Wallpaper

H HOME u Settings u Clock/Info u Clock tab u Clock/Wallpaper Type u Wallpaper tab

1. Select Add New.

2. Select a desired picture.

u The preview is displayed on the left side on the screen.

u You can select multiple pictures at a time.

3. Select Start Import.

u After the picture is imported, the display will return to the wallpaper list.

1

Import Wallpaper

Recommended files

• When importing wallpaper files, the image must be in the USB flash drive’s root directory.

Images in a folder cannot be imported.

• The file name must be fewer than 256 characters.

• The file format of the image that can be imported is BMP (bmp) or JPEG (jpg).

• The individual file size limit is 5 MB.

• The maximum image size is 4,096 × 4,096 pixels. If the image size is less than 420 × 234 pixels, the image is displayed in the middle of the screen with the extra area appearing in black.

• Up to 5 files can be saved.

• If the USB flash drive does not have any pictures, the No files detected message appears.

Shortly after setting the wallpaper or importing pictures, do not set the power mode to OFF, or disconnect the USB device. It may cause the setting error or the destruction of data.


■

Select Wallpaper


1. Select a desired wallpaper.


1

Select Wallpaper

When the file size is large, it takes a while to be previewed.

To view wallpaper once set: press the HOME button, select Info, press the MENU button, and select

Clock/Wallpaper.

2. Select Set.

u Select Preview to see a preview at full-size screen.

3. Select OK.

Continued 75

76


■

Delete Wallpaper


1. Select a wallpaper that you want to delete.


1

Delete Wallpaper

Select Delete All to delete all imported wallpapers.

“Blank”, “Galaxy”, “Metallic” and “Time Zone” cannot be deleted.

2. Select Delete.

u The confirmation message will appear.

3. Select Yes.

u The display will return to the wallpaper list.


Adjust Time

H HOME u Settings u Clock/Info u Clock tab u Clock Adjustment

Adjust the current time (hours and minutes).

value.

2. Select OK.

or the uu Clock Adjustment u Adjust Time

Resetting the Clock Settings

H HOME u Settings u Clock/Info u Clock tab u Clock Reset

Reset all clock settings to the factory defaults.

Select Yes to reset.

77


Other Settings

H HOME u Settings u System u Others tab

Set the map units (either miles or kilometers), the system language, and various settings for the navigation system.

Select an item.

1

Other Settings

Unit

The factory default is set to km on Canadian models.

78


• Unit: Sets the map units to either miles (factory default) or kilometers.

• Language: Sets the system language used on all screens. You can choose from three languages.

• Keyboard Layout: Sets the type of keyboard screen to either Alphabet or

QWERTY (factory default).

• Voice Command Tips: Alerts you when manual control of the system is disabled to prevent distraction while driving. Only voice commands are available.

On (factory default): Displays a message.

Off: Disables the message, but some options may be grayed out on the screen.

• Remember Last Screen: Sets whether to display the last selected screen when you turn on the system.

On: Displays the last selected screen.

Off (Factory Default): Disables the feature.

• Factory Data Reset: Resets all the settings on the Settings screen to their factory defaults.

2 Data Reset P. 80

16 CR-Z NAVI-31SZT8500.book 79 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Other Settings u Language

Language

H HOME u Settings u System u Others tab u Language

Set the system language used on all screens. You can choose from three languages:

English, Français (French), Español (Spanish).

Select the system language.

1

Language

Voice confirmation of cities and streets only occurs when English is the system language.

When Français or Español is selected, some messages continue to be displayed in English.

79

80


Data Reset

Reset Factory Default Settings

H HOME u Settings u System u Others tab u Factory Data Reset

Reset all the settings on the Settings screens to their factory defaults.

Select Yes.

1

Reset Factory Default Settings

The following settings are reset:

• Navigation settings

• Phone settings

• Info settings

• Audio settings

• Camera settings

• Bluetooth settings

• System settings

When you transfer the vehicle to a third party, reset all settings to default and delete all personal data.


Navigation

This section describes how to enter a destination, select a route to take, and follow the route to your destination. It also describes how to change your route or destination along the way.

Entering a Destination ........................... 82

Address ................................................. 84

Address Book......................................... 89

Place Name ............................................ 90

Place Phone Number .............................. 92

Place Category ....................................... 93

Previous Destination............................... 95

Intersection ............................................ 96

Coordinate ............................................ 97

Map Input.............................................. 98

Calculating the Route ........................... 100

Viewing the Routes .............................. 101

Driving to Your Destination................. 102

Viewing the Route ............................... 102

Listening to Voice Guidance ..................106

Map Menu ..............................................107

Displaying the Map Menu .....................107

Directions .............................................109

Traffic Rerouting TM ................................111

Changing Your Route ............................113

Adding Waypoints ................................114

Editing the Destination List....................118

Canceling the Route .............................120

Taking a Detour ....................................120

Avoiding Streets....................................121

Changing Your Destination ..................122

Find Nearest Place .................................122

Selecting a Destination on the Map.......123

Entering a New Destination .................. 124

Resuming Your Trip .............................. 125

81


Entering a Destination

H HOME u Navi u MENU

This section describes how to enter a destination for route guidance.

Select an item.

u Select More Search Methods to display additional menu entries.

1

Entering a Destination

“Display Menu” (on the map screen)

If you select MENU on the map screen when en route, the Route Option screen is displayed.

2 Changing Your Route P. 113

Prior to departure, you can set areas along your route to avoid.

2 Avoiding Streets P. 121

Certain touchscreen functions are disabled while the vehicle is moving.

2 Limitations for Manual Operation P. 23

82


• Address: Sets a destination by entering an address.

2 Address P. 84

• Address Book: Sets a destination by selecting an address stored in your Address

Book.


• Place Name: Sets a destination by entering a place name.

2 Place Name P. 90


• Place Phone Number: Sets a destination by entering the phone number of a place/landmark.

2 Place Phone Number P. 92

• Place Category: Sets a destination by selecting a place/landmark.


• Previous Destination: Sets a destination by selecting a previous destination.


• Go Home 1 or 2: Sets your home address as a destination.

2 Going Home P. 13

• Intersection: Sets a destination (intersection) by entering two streets.

2 Intersection P. 96

• Coordinate: Sets a destination by entering latitude and longitude.

2 Coordinate P. 97

• Map Input: Sets a destination by scrolling through the map.


uu Entering a Destination u

83

84

16 CR-Z NAVI-31SZT8500.book 84 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Address

Address

H HOME u Navi u MENU u Address

Enter an address to use as the destination. The state or province you are currently in is displayed (e.g., CALIFORNIA).

Select an item.

1

Address

On Canadian models, Change Province is displayed instead of Change State.

U.S. models

You can say the entire address at once using voice commands. Say “Address” on the Voice Portal screen, then say the entire address. For example,

“1-2-3-4 Main Street, Los Angeles, California.” The system interprets the address. Say “Set as

destination” to begin the route.

The system language needs to be set in English.


• City: Selects your destination city.

2 Selecting a City P. 86

• Street: Selects your destination street.

2 Selecting a Street P. 87

• Change State: Selects the state or province.

2 Selecting the State or Province P. 85


■

Selecting the State or Province

H HOME u Navi u MENU u Address u Change State

1. Select a state or province from the list.

u Select a tab to change the country.

uu Entering a Destination u Address

Continued 85

86


■

Selecting a City

H HOME u Navi u MENU u Address u City

The name of the city where you are currently located is displayed.

1. Enter the name of a different city, or select OK for the current city.

1

Selecting a City

Vehicle position may not be displayed when:

• The automobile is traveling off-road.

• The vehicle position data cannot be updated.

You do not need to enter spaces or symbols (e.g., &,

-,%). Partial matches are supported (e.g., “LOS” to find “LOS ANGELES”).

Using Voice Command (English only) following screen is displayed.

Non-detailed area mark: Try entering the street first and then select the city.

2. Select your destination city from the list.

u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.

u Next, you are prompted to enter a street name.


Select Current City for your current location, or say the name of different city.


If your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.


■

Selecting a Street

H HOME u Navi u MENU u Address u Street

1. Enter the name of your destination street.

u Do not enter the street type

(e.g., street, road, avenue) or direction (e.g., north, south, east, west).

u Select OK to display a list of streets.

1

Selecting a Street

When entering the names of major freeways, you can use the following abbreviations. For interstates, use an “I” (e.g., I-10). For U.S. freeways, use “US” (e.g.,

US-18). For state freeways, use the two-character state designation (e.g., CA-101). For county roads, use the appropriate designation (e.g., G-2). For

Trans-Canada and Provincial highways, use “Hwy”

(HWY-7). For County roads, use “CR” (CR-32). For

Regional Roads, use “RR” (RR-5).

Using Voice Command (English only)

2. Select your destination street from the list.

u A list of matching hits is automatically displayed after you enter several letters, with the closest match at the top of the list.

following screen is displayed:

• Say the name of your destination street, and say the street number as a string of individual numbers.

• Set the route to your destination.

2 Calculating the Route P. 100

Continued 87

88


3. Enter the street number. Select

OK.

u Only valid street numbers can be entered.

4. Set the route to your destination.


1

Selecting a Street

If you did not select a city first and there is more than one city with the specified street, a list of cities is displayed.

Select the desired city from the list.

If there is more than one address though you specified the street and the city, select an address on the Select an address screen.


Address Book

H HOME u Navi u MENU u Address Book

Select an address stored in your address book to use as the destination.

1. Select the driver.

uu Entering a Destination u Address Book

1

Address Book

If you have PIN-protected your address book, enter your PIN number when prompted. Select OK. PINs are optional.


You can select Add New Address on the Address book screen to add an entry to the address book.

2 Adding an Address Book Entry P. 31

2. Select your destination from the list.



u Select or to display only the entries in a category: ALL,

BUSINESS, PERSONAL, or other categories you have created.

2 Selecting an Address Book

Category P. 33

89

90

16 CR-Z NAVI-31SZT8500.book 90 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Place Name

Place Name

H HOME u Navi u MENU u Place Name

Enter the name of a place (e.g., business, hotel, restaurant) stored in the map database to use as the destination.

1. Enter a place name.

2. Select OK to display a list of matching hits.

1

Place Name

This option is convenient if you know the exact name of a place.

Select ÁÀÂ or Symbol tab to enter accented letters or symbols, select Space to enter a space character, or select to remove the last character.

Once a name is entered and selected, select Sort by

Name or Sort by Distance. Matching letters are in blue.

3. Select a place name from the list.

u If the place name is in multiple categories, the categories are displayed when you select it.

2 Place Name in Multiple

Categories P. 91



16 CR-Z NAVI-31SZT8500.book 91 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Place Name

■

Place Name in Multiple Categories

If the place name is in multiple categories in the map database, the following screen is displayed.

1. Select a place name.

1

Place Name in Multiple Categories

Select Sort by Name or Sort by Distance.

2. Select a subcategory.



91

92

16 CR-Z NAVI-31SZT8500.book 92 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Place Phone Number

Place Phone Number

H HOME u Navi u MENU u Place Phone Number

Select a destination by phone number. Only phone numbers in the database are recognized.

1. Enter the area code and phone number. Select OK.



1

Place Phone Number

All 10 digits must be entered.

Phone numbers of private residences entered in your address book are not stored in the database and thus cannot be used to search for a destination.

16 CR-Z NAVI-31SZT8500.book 93 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Place Category

Place Category

H HOME u Navi u MENU u Place Category

Select the category of a place (e.g., Banking, Lodging, Restaurant) stored in the map database to search for the destination.

1. Select a category.


2 List of Categories P. 242

1

Place Category

This option is convenient if you do not know the exact name of a place or if you want to narrow down the number of matches returned for places with a common name.

Select Category History tab to access your recently used place categories. Up to 50 categories can be stored.

You can also delete your recently used place categories.

2 Category History P. 39

Search POI Categories helps you to search the subcategory. When you enter a keyword and select

OK, the list of appropriate subcategories is displayed.

Continued 93

94

16 CR-Z NAVI-31SZT8500.book 94 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Place Category

3. Select an item.


• Search by Name: Searches for a place in the subcategory by name. Enter a city name when prompted.

• City Vicinity: Searches for a place in the subcategory within a 20-mile (32-km) radius of a specific city. Enter a city name and then a place name when prompted.

Only the first approximately 1,000 matching places/landmarks are displayed.

• Sort by Distance to Travel: Displays up to approximately 1,000 places in the subcategory sorted by distance from your current location. The closest place is displayed at the top.

4. Select a place name from the list.



16 CR-Z NAVI-31SZT8500.book 95 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Previous Destination

Previous Destination

H HOME u Navi u MENU u Previous Destination

Select an address from a list of your 50 most recent destinations to use as the destination. The list is displayed with the most recent destination at the top.

1. Select a destination from the list.



1


If Previous Destination is grayed out, there are no previous destinations entered.

Your home addresses and addresses stored in your address book are not added to the list of previous destinations.

You can delete unwanted previous destinations from the list.


Select Delete All to delete all previous destinations.

95

96

16 CR-Z NAVI-31SZT8500.book 96 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Intersection

Intersection

H HOME u Navi u MENU u More Search Methods u Intersection

Select the intersection of two streets as the destination. The state or province for your current location is displayed at the left side of the screen (e.g., CALIFORNIA).

1. Select the intersection search method.




• City: Selects the city where the intersection is located. You are prompted to enter the name of the two intersecting streets.


• Street: Selects the two intersecting streets. The city or cities that the streets are located in are displayed.


• Change State: Selects the state or province.


1

Intersection

It is usually easier to select Street to find the streets first. The city or cities that the streets are in will be displayed. If you select City and your city is not listed, it may be part of a larger metropolitan area. Try entering the street first.

If the intersection is outside the state you are currently in, select Change State.


On Canadian models, Change Province is displayed instead of Change State.

If there is more than one intersection, you are prompted to select the intersection. If the two streets that you have selected do not intersect, no intersection is entered.

16 CR-Z NAVI-31SZT8500.book 97 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Coordinate

Coordinate

H HOME u Navi u MENU u More Search Methods u Coordinate

Specify a location using latitude and longitude map coordinates.

1. Enter the latitude. Select OK.

2. Enter the longitude. Select OK.

1

Coordinate

Latitude and longitude must be entered up to the seconds’ value.

Place/landmark icons are displayed at 1/8 mile (200 m) or less. Roads are displayed at 1/4 mile (400 m) or less.

If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.

2 Selecting a Destination on the Map P. 123

3. Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary.

u If the address is not the desired location, scroll to another location and try again.

4. Select an icon from the right side of the screen to display the route calculation menu.


5. Select Set as Destination.

97

98

16 CR-Z NAVI-31SZT8500.book 98 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Map Input

Map Input

H HOME u Navi u MENU u More Search Methods u Map Input

Scroll and select an icon on the map screen as the destination.

You are prompted to define the map area to display.

1. Select an item.

1

Map Input

On Canadian models, Province is displayed instead of State.


• Current Position: Your current position is centered on the map.

• State: You are prompted to select the state or province.


• City: You are prompted to enter the city name.


16 CR-Z NAVI-31SZT8500.book 99 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Entering a Destination u Map Input


u If the address is not the desired location, scroll the map to another location and try again.

1

Map Input

Place/landmark icons are displayed at 1/8 mile (200 m) or less. Roads are displayed at 1/4 mile (400 m) or less.

If you select multiple icons within the cursor radius, you are prompted to select one of the items from a list.

2 Selecting a Destination on the Map P. 123

3. Select an icon from the right side of the screen to display the route calculation menu.



99

100


Calculating the Route

This section describes how to calculate your route.


u The system calculates and displays the route line on the map screen.

2 Route Line P. 104


• View Routes: Displays three different routes.

2 Viewing the Routes P. 101



2. Follow the route guidance to your destination.

2 Driving to Your Destination

P. 102

u The system provides you with pop-up messages if your route passes through unverified areas, avoid areas, or areas with traffic restrictions.

1

Calculating the Route

You cannot use voice commands while the system is calculating the route.

Search Nearby

You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.

2 Find Nearest Place P. 122

Call

You can place a telephone call to the destination phone number.


Address Book

You can add the destination address to the address book.

2 Adding an Address Book Entry P. 31

Edit/Delete Entry

You can edit or delete the address book entry.

2 Editing an Address Book Entry P. 33

Edit Home Entry

You can edit your home address entry.

2 Storing Your Home Address P. 13

16 CR-Z NAVI-31SZT8500.book 101 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Calculating the Route u Viewing the Routes

Viewing the Routes

View three different routes to your destination.

1. Select a route on the list.

u The travel distance and estimated travel time is displayed for each route.

u The system calculates and displays the route line on the map screen.

2 Route Line P. 104

2. Select OK.

1

Viewing the Routes

It is not unusual for some calculated route options to be identical.

101

102


Driving to Your Destination

This section describes how to follow the route guidance to your destination, receive traffic information, and choose the icons displayed on the map screen.

Viewing the Route

■

Map Screen

After calculating the route to your destination, the route is displayed on the map screen.

2 During Route Guidance P. 12

As you drive, the system tracks your position on the map in real time and provides guidance as you approach each guidance point on the route.

1

Viewing the Route

“Display Map”

You can change the map scale using voice control commands (e.g., say “Display 2 mile scale”).

2 Map Scale Commands P. 233

You can also change the map scale by selecting the scale icon, pinching in/out, and double tapping on the map screen with two fingers (zoom out only).

You can control the icons displayed on the map screen using voice control commands (e.g., say

“Display post office”).


You can obtain information about the route using voice control commands (e.g., say “How long to

the destination?”).

2 Route Commands P. 234

If you scroll the map while en route, the time and distance to destination indicators are hidden, and an indicator showing distance from the current vehicle position is displayed at the bottom of the screen.

16 CR-Z NAVI-31SZT8500.book 103 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Driving to Your Destination u Viewing the Route

■

Guidance Screen

The guidance screen offers an alternative way to view your route.

u The next guidance point is displayed as you approach each guidance point on the route.

u You can also view a list of guidance directions.

2 Directions P. 109

1

Guidance Screen

A visual guide helps you check the guidance screen.

2 Guidance Screen P. 12

Continued 103

104

16 CR-Z NAVI-31SZT8500.book 104 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Driving to Your Destination u Viewing the Route

■

Route Line

When driving on verified streets, the route line is light blue. The route line display changes when driving on unverified streets:

Straight line guide u If Unverified Routing is Off, the route line uses verified streets only

(when possible). If Straight Line

Guide is set to On, a pink “vector line” pointing directly toward your destination is displayed.


1

Route Line

You can set Unverified Routing to Off to follow your own route to the destination. If Unverified

Routing is On, be aware that unverified streets may not be displayed accurately.


You can always view the entire route by simply saying

“Display entire route”.

2 Route Commands P. 234

The route line may also consist of red, orange, or green segments when your route line displays traffic information.



Pink route line u If Unverified Routing is On, the route line changes to a pink line to indicate that the route line uses unverified streets.


■

Deviating From the Planned Route

If you leave the calculated route, the system automatically recalculates a route to the desired destination based on your current location and direction. uu Driving to Your Destination u Viewing the Route

■

Driving Off-road

If you leave all mapped (digitized) roads, the system automatically starts displaying a series of dots (breadcrumbs) to track the path you are taking. If needed, you can follow the dots back to the mapped road you originally left.


1

Driving Off-road

Breadcrumbs may appear when you drive half a mile away from a mapped road.

Breadcrumbs may occasionally be displayed in urban areas, such as large parking lots in shopping malls, in new subdivisions where the roads are not yet in the database, or in areas where a GPS signal is unavailable, such as in a parking garage.

Off-road tracking breadcrumbs are limited to approximately 150 miles (240 km). Breadcrumbs at the beginning of the trail are deleted if you exceed that distance.

Breadcrumbs are displayed only at 1/20, 1/8, 1/4, and

1/2 mile (80, 200, 400, and 800 m) scales.

105

106

16 CR-Z NAVI-31SZT8500.book 106 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Driving to Your Destination u Listening to Voice Guidance

Listening to Voice Guidance

H HOME u Navi u (Map menu) (on map) u Voice

As you approach each guidance point, a pop-up window is displayed on the map screen with instructions for you to follow. Voice guidance for each guidance point is also provided.

Typically, you hear three prompts:

• 1/2 mile (800 m) from the guidance point (2 miles (3 km) on freeway)

• 1/4 mile (400 m) from the guidance point (1 mile (1.5 km) on freeway)

• Just before the guidance point

To replay voice guidance, select Voice in the Map Menu.

If you select Voice between guidance points, voice guidance for the next guidance point is provided.

1

Listening to Voice Guidance

“Voice” (on the map screen)

You can turn voice guidance off if you prefer.


When driving in unverified areas, the phrase “if

possible” is inserted after each voice guidance prompt.

Voice in the Map menu may be grayed out if:

• The system is in process of gathering the route guidance information.

• The vehicle is off the main road (e.g., pulling in a parking lot).

The timing of voice guidance varies depending on the type of road you are on and the distance to the next guidance point.


Map Menu

Displaying the Map Menu

Use the (Map menu) icon to control the icons displayed on the map screen and to display traffic information. You can also use the find locations or to cancel the route.

(Map menu) icon to

1. On the map screen, select

(Map menu) (if displayed).

u The Map menu screen is displayed.

1

Map Menu

If you scroll the map while en route, select the

(Navi/Back) icon or select BACK to return to the current position map screen, then select menu) icon.

(Map

2. Select an item.

Continued 107

108

16 CR-Z NAVI-31SZT8500.book 108 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map Menu u Displaying the Map Menu


• Voice: Select to hear the voice guidance when en route.

2 Listening to Voice Guidance P. 106

• Map/Guidance: Allows you to select the map and guidance settings (display mode, map orientation, icons to display on the map, map color, display your current location, an overview of the map features and 3D view angle).

2 Guidance Mode P. 49



2 Color P. 55

2 Current Location P. 58

2 Map Legend P. 59


• Cancel Route: Cancels your current route.

2 Canceling the Route P. 120

• Directions: Displays a list of the guidance points.

2 Directions P. 109

• Search Nearby: Allows you to find the nearest place/landmark (e.g., nearest gas station) by specifying a category. You can then add the location to the list of destinations, set as a waypoint, or set as your destination.


• Traffic Incidents: Displays a list of the traffic incidents around your current location or on your current route.


1

Map Menu

Traffic Incidents




The incident icons are displayed on the 5 mile (8 km) or less map scale.

2 Map Scale and Functions P. 60

Directions

The system provides freeway exit information only in the U.S.

16 CR-Z NAVI-31SZT8500.book 109 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map Menu u Directions

Directions

H HOME u Navi u (Map menu) (on map) u Directions

Display a list of the guidance points on your route for your confirmation.

Select or , or flick the screen to scroll through the list.

u When you select a guidance point from the list, the system displays a map of the guidance point.

1

Directions

Guidance points with exit information are indicated by a (freeway exit information) icon. Select Exit

Info to display the exit information.


2 Freeway Exit Information P. 110

The route guidance information is automatically deleted when you reach your destination.

When you select a guidance point, a map of the guidance point is displayed as following. Select Back to List to return to the directions list screen.

Continued 109

110

16 CR-Z NAVI-31SZT8500.book 110 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map Menu u Directions

■

Freeway Exit Information

H HOME u Navi u (Map menu) (on map) u Directions u Exit Info

Display a list of the freeway exits for the route. You can view freeway exit information (whether the exit is near fuel stations, restaurants, ATMs, etc.) and add new destinations or waypoints to the calculated route.

1. Select an exit from the list.

1

Freeway Exit Information

“Display Freeway Exit Information”

You can scroll the map and select a (freeway exit information) icon on the map screen to display the freeway exit information. The icon is only displayed if there is exit information available.

Icons are displayed only at 1/4, 1/2, or 1 mile (400,

800, or 1600 m) scale.



2. Select a list item.

u Select or to display information for different exits.

u The location is displayed on the

Calculate Route screen.

2 Calculating the Route

P. 100

16 CR-Z NAVI-31SZT8500.book 111 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map Menu u Traffic Rerouting TM

Traffic Rerouting

TM

When driving to your destination, the system automatically searches for a faster route based on traffic flow information and traffic incidents.


1

Traffic Rerouting TM

Traffic information is only available in certain areas.

Automatic traffic rerouting may not provide a detour route depending on circumstances.

The route is recalculated only when Traffic

Rerouting is set to On.


Continued 111

16 CR-Z NAVI-31SZT8500.book 112 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Map Menu u Traffic Rerouting TM

112

■

Traffic Rerouting

TM

Manually

H HOME u Navi u (Map menu) (on map) u Traffic Incidents

Manually avoid specific incidents and/or congestion on your route.

1. Select an incident from the list.

1

Traffic Rerouting TM Manually

Traffic rerouting is only available in certain areas.




2. Select Avoid.

u Repeat steps 1 and 2 as necessary.

3. Select Recalculate Route.

u The system recalculates a detour route that avoids the selected traffic incidents.

You can display traffic incidents and related information on the map screen using voice commands.


You can also display the traffic incidents from the

Info Menu screen. Select Info on the HOME screen, select MENU, and then select Traffic Incidents.

You can choose to avoid up to 10 traffic incidents. It is not always possible for the system to calculate a route that avoids all traffic incidents or specific traffic incidents you select.

The On Route tab on the Traffic List screen is only available during route guidance.

You cannot select an incident to avoid from the All tab.

You can also detour around a traffic incident manually if you encounter an unexpected obstacle.

2 Taking a Detour P. 120

Show Map displays a map of the incident location.

Select Return to return to the list.


Changing Your Route

H HOME u Navi u MENU (when en route)

This section describes how to alter your route, add an interim “waypoint” (pit stop), choose a different destination, cancel your current destination, and continue your trip after stopping.

Select an item.

1

Changing Your Route

“Display Menu” (on the map screen, when en route)

If you select MENU on the map screen when not en route, the Destination menu screen is displayed.



• Voice: Select to hear the voice guidance when en route.

2 Listening to Voice Guidance P. 106

• Change Route Preference: Changes the route preferences (calculating method).


• Destination List: Shows a list of waypoints. You can delete waypoints or edit the order of them.

2 Editing the Destination List P. 118

• Cancel Route: Cancels the route guidance.

2 Canceling the Route P. 120



• Detour: Calculates a detour route.

2 Taking a Detour P. 120

• Avoid Streets: Avoids streets along your route.


113

114

16 CR-Z NAVI-31SZT8500.book 114 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Route u Adding Waypoints

Adding Waypoints

Add up to four waypoints (pit stops) along the route to your destination.

Waypoints are displayed on the map screen as small, numbered red flags.

The route follows the waypoints in the order they are listed in the

Destination List.

1

Adding Waypoints

Waypoints allow you to stop for gas or food, for example, and then continue on to your destination.

Select the (Navi/Back) icon to return to the map screen without adding a waypoint at any time.

The search corridor used for adding waypoints can be adjusted.

2 Edit POI Search Radius Along Route P. 45

You can delete waypoints or edit the order of waypoints in the Destination List.



■

Adding Waypoints from the Route Menu

H HOME u Navi u MENU (when en route) u Destination List u Add New

Destination

1. Select a search method to add a waypoint.

1


Search method

“Search around” method

“Search along” method


• Use Navigation Menu: Searches from the Destination menu. Select a search method from the Destination menu.


• Places Along the Route: Searches within a “corridor” on either side of the route. Select a place by selecting a place category.


• Places Around the Destination: Searches in a spiral pattern around the destination. Select a place by selecting a place category.


• Places Around the Waypoint: Searches in a spiral pattern around the location you select. Select a waypoint you want to search around, and then select a place by selecting a place category.


Continued 115

116


2. Select a place.

u The waypoint is added to the

Destination List.

1


If you select a location by Use Navigation Menu, the Select order screen is not displayed.

Select Edit Order on the Destination list screen to edit the order of waypoints.


3. Select or , and move the order of destinations. Select OK.

4. Select Start Route.

u The route is automatically recalculated and displayed on the map screen.


■

Adding Waypoints from the Calculate Route Screen

1. Select a new address or location.


uu Changing Your Route u Adding Waypoints

3. Select or and select a location.

4. Select OK.


117

118

16 CR-Z NAVI-31SZT8500.book 118 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Route u Editing the Destination List

Editing the Destination List

■

Editing the Order of Waypoints

H HOME u Navi u MENU (when en route) u Destination List

1. Select Edit Order.

1

Editing the Order of Waypoints

Select Show All on Map to display the destination and waypoints on the map screen.

2. Select a list item to move.

3. Select or , and select a new location. Select OK.

4. Select Start Route.



■

Deleting Waypoints

H HOME u Navi u MENU (when en route) u Destination List

1. Select a list item to delete.

2. Select Delete.

uu Changing Your Route u Editing the Destination List

1

Deleting Waypoints

Select Delete on the Destination list screen before selecting a list item to select multiple locations to delete.

Select Show on Map to display the waypoint on the map screen.

119

120

16 CR-Z NAVI-31SZT8500.book 120 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Route u Canceling the Route

Canceling the Route

H HOME u Navi u MENU (when en route) u Cancel Route

Cancel the route guidance and remove the destination and all waypoints from the

Destination List. The system then returns to the map screen.

1

Canceling the Route

You can also cancel your route from the Map Menu.

2 Map Menu P. 107

Taking a Detour

H HOME u Navi u MENU (when en route) u Detour

Calculate a detour route manually. The system attempts to calculate a new route by avoiding the next 5 miles (8 km) (while on a freeway) or 1 mile (1600 m) (while on a surface street).

1

Taking a Detour

The detour option is convenient if you encounter an unexpected obstacle such as a road closure or extremely heavy traffic congestion.

16 CR-Z NAVI-31SZT8500.book 121 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Route u Avoiding Streets

Avoiding Streets

H HOME u Navi u MENU (when en route) u Avoid Streets

Select a street or streets along your route to avoid.

1. Select the street you want to avoid.

u Repeat the procedure to avoid other streets.

u Streets to be avoided are indicated with a trash lid open icon.

2. Select Recalculate Route.

u The system calculates a new route.

1

Avoiding Streets

Avoiding certain streets is convenient if you know of road construction, road closures, or excessive traffic along the route.

You cannot choose specific streets you want to use, only those to avoid. However, you can select intersections or waypoints (places/landmarks) that the system will use in your route.

2 Adding Waypoints P. 114

You can store up to 10 streets to avoid. You cannot avoid your current street or the streets of your waypoint(s) or destination (system beeps if selected).

121

122


Changing Your Destination

There are several methods you can use to change the route destination.

Find Nearest Place

H HOME u Navi u (Map menu) (on map) u Search Nearby

Search for the nearest place/landmark on the map screen and set it as your destination.

1. Select a category type.


3. Select a place.


5. Select Clear Current Route or select a location to add to the destination list.

u The system calculates the route.

2 Calculating the Route

P. 100

1

Find Nearest Place

“Find Nearest…” (on Voice Portal screen)

The Find Nearest voice command is the fastest method of specifying a place/landmark as your destination. Many kinds of places can be found.

2 Find Place Commands P. 233

16 CR-Z NAVI-31SZT8500.book 123 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Destination u Selecting a Destination on the Map

Selecting a Destination on the Map

Select a new destination when en route by selecting a location on the map.


u If the address displayed is not the desired location, select

BACK and repeat the procedure.

2. Select an icon from the right side of the screen.





1

Selecting a Destination on the Map

Select the list open/close tab to open the list.

2 Map Screen during Scrolling P. 12

The following icons are available.

• : Traffic *

• : Map Icon

• : Exit Info *

• : Street

• : Address Book/Home

* These icons are only available in certain areas.

If there is more than one landmark icon under the map cursor, you are prompted to select a place from a list.

Limited coverage only

When you select a traffic incident icon, you can check the traffic information for the selected location.

123

124

16 CR-Z NAVI-31SZT8500.book 124 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Changing Your Destination u Entering a New Destination

Entering a New Destination

H HOME u Navi u MENU (when en route) u Destination tab

Enter a new destination using the Destination menu screen even when you are en route.

1. Select a method to enter a new destination.


u After entering a new destination, the address is displayed on the Calculate

Route screen.




1

Entering a New Destination

“Display Menu” (on the map screen)


Resuming Your Trip

Stop your vehicle en route (e.g., to rest, stop for gas, etc.), and then continue on your route.

If you did not complete your route, the Continue trip to screen is displayed when you restart your vehicle.

Select Set as Destination.

u You can continue on the same route.





1

Resuming Your Trip

The Continue trip to screen has the same options as when you calculate a route.


To cancel your destination, select BACK.

Search Nearby

You can find the nearest place/landmark (e.g., nearest gas station) by specifying a category.


Call

You can place a phone call to the destination phone number.


Edit/Delete Entry

You can edit or delete the address book entry.

2 Editing an Address Book Entry P. 33

When you restart the vehicle, the route is recalculated without the selected traffic incidents to avoid.

2 Traffic Rerouting TM Manually P. 112

125

126



Audio

This section describes how to operate the audio system. You can play music from a wide array of media sources, and control the audio system using the touchscreen, remote control, or voice control.

Audio System ........................................ 128

About Your Audio System.................... 128

Audio System Theft Protection ............. 129

Audio Remote Controls ........................ 130

Steering Wheel Controls ...................... 130

Audio Settings ...................................... 132

Adjusting the Sound ............................ 133

Playing FM/AM Radio........................... 134

Selecting FM/AM Mode........................ 134

Audio Screen Control........................... 135

Audio Menu ........................................ 136

Playing a Disc ........................................ 138

How to access the disc slot................... 138

Selecting Disc Mode............................. 138

Audio Screen Control........................... 139

Playing MP3/WMA/AAC Discs ...............140

Audio Menu .........................................141

Recommended Discs .............................142

Playing an iPod ......................................143

Selecting iPod Mode .............................144

Audio Screen Control............................145

Audio Menu .........................................146

Searching for Music ..............................147

Song By Voice TM (SBV) ...........................148

Playing Pandora® ...................................151

Selecting Pandora® Mode......................151

Audio Screen Control............................152

Audio Menu .........................................153

Playing a USB Flash Drive .....................154

Selecting USB Mode..............................155

Audio Screen Control ........................... 156

Audio Menu......................................... 157

Playing Bluetooth® Audio .................... 158

Selecting Bluetooth® Audio Mode ........ 158

Switching to HFL Mode ........................ 159

Audio Screen Control ........................... 160

Audio Menu......................................... 161

Playing a Video Using the HDMI TM ...... 162

Selecting HDMI TM Mode ....................... 163

127

128


Audio System

About Your Audio System

The audio system features FM/AM radio. It can also play audio discs, WMA/MP3/

AAC tracks, iPods, USB flash drives, and Bluetooth® devices.

The audio system is operable from the items on the touchscreen, or the remote controls on the steering wheel.

2 Audio Remote Controls P. 130

2 Audio System P. 10

iPod iPhone

1

About Your Audio System

Video CDs, DVDs, and 3-inch/8-cm mini discs are not supported.

Do not leave the iPod or USB flash drive in the vehicle.

Direct sunlight and high temperatures may damage it.

iPod, iPhone and iTunes are trademarks of Apple Inc.

State (provincial in Canada) or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

You can operate the audio system by voice commands.

2 Audio Commands P. 235

Remote Control USB Flash Drive


Audio System Theft Protection

The audio system is disabled when it is disconnected from the power source, such as when the battery is disconnected or goes dead. In certain conditions, the system may display Enter Code. If this occurs, reactivate the audio system.

■ Reactivating the audio system

1. Set the power mode to ON.

2. Turn on the audio system.

3. Press and hold the audio system power button for more than two seconds.

u The audio system is reactivated when the audio control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the audio unit checked.

uu Audio System u Audio System Theft Protection

129

130


Audio Remote Controls

Steering Wheel Controls

Control basic audio system functions using the controls mounted on the steering wheel.

MODE button

Volume button

■

MODE Button

Cycles through the audio modes as follows:

Channel button

1

MODE Button

Disc mode appears only when a disc is loaded.

The USB mode, iPod mode, App mode, Bluetooth®

Audio mode, and Pandora® * mode appear when a connection (Bluetooth or USB) is established with a device.

App mode appears only when a connection is established with your smartphone and the app is launched.

Aha TM mode appears only when a connection is established with your smartphone and HondaLink app is launched.

AUX-HDMI TM mode appears only when a connection via HDMI TM cable is established.


16 CR-Z NAVI-31SZT8500.book 131 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Audio Remote Controls u Steering Wheel Controls

■

(Volume) Button

Adjusts the volume.

• Press the (Volume) button to increase the volume.

• Press the (Volume) button to decrease the volume.

■

(Channel) Button

FM/AM

• Press the (Channel) button to select the next preset station (channel).

• Press the (Channel) button to select the previous preset station (channel).

• Press and hold the or (Channel) button to skip to the next or previous station in the frequency.

Disc, iPod, USB, or Bluetooth® Audio (on some phones)

• Press the (Channel) button to skip to the next track.

• Press the (Channel) button to skip to the beginning of the current track. Press the (Channel) button again to go to the beginning of the previous track.

• Press and hold the or (Channel) button to skip up or down a folder (MP3/

WMA/AAC Discs and USB devices), and a group (some Bluetooth devices).

Pandora® *

• Press the (Channel) button to skip to the next song.

• Press and hold the or (Channel) button to select the upper or lower station.

1

(Channel) Button


131


Audio Settings

H HOME u Settings u Audio

Select an item.


• Sound: Adjusts the settings of the audio speaker’s sound.

2 Adjusting the Sound P. 133

• Audio Source Pop-Up: Selects whether the list of selectable audio sources comes on when Audio is selected on the HOME screen.

• HD Radio Mode (AM/FM mode): Selects whether the audio system automatically switches to the digital radio waves or receives the analogue waves only.

• Cover Art *1 (iPod, Pandora® *2 , USB or CD mode): Turns on and off the cover art display.

• RDS INFO (AM/FM mode): Selects whether the RDS information displays on the audio screen.

• Change Bluetooth Audio Device (Pandora® *2 , Bluetooth® Audio mode):

Connects, disconnects or pairs a Bluetooth Audio device.

• Bluetooth Device List (Pandora® *2 , Bluetooth Audio mode): Edit or delete the list of Bluetooth Audio devices.

1

Audio Settings

The Audio Setting items differ depending on the playing source.

U.S. models

HD Radio Mode

HD Radio TM functions may not be available on the vehicle’s audio system.

Cover Art

While playing the HD Radio TM , Cover Art appears also on the Audio settings screen of AM/FM mode.

132

*1: May change depending on your currently selected source.

*2: Pandora® is available on U.S. models only.

16 CR-Z NAVI-31SZT8500.book 133 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Audio Settings u Adjusting the Sound

• Display Adjustment (HDMI TM mode): Adjusts the screen preference while playing the video.

– Display tab: Adjusts Brightness, Contrast, and Black Level of the video screen.

– Color tab: Adjusts Color and Tint of the video screen.

• Aspect Ratio Adjustment (HDMI TM mode): Sets the aspect ratio of the image.

– Normal: Displays the image with the ratio of 4 to 3.

– Full: Displays the image in full-screen.

– Zoom: Displays the enlarged image.

Adjusting the Sound

H HOME u Settings u Audio u Sound

Adjust the bass, treble, fader, balance and sub woofer. In addition, you can set

Speed-sensitive Volume Compensation (SVC).

1. Select the tab to adjust the desired sound mode.

2. Adjust the desired level.

1

Adjusting the Sound

Fader adjusts the front-to-back strength, while balance adjusts the side-to-side strength.

SVC has four modes: Off, Low, Mid, and High. SVC adjusts the volume level based on the vehicle speed.

The faster you go, the audio volume increases. As you slow down, the audio volume decreases.

133

134


Playing FM/AM Radio

Selecting FM/AM Mode

1. Select Audio on the HOME screen.

2. Select SOURCE.

3. Select the FM or AM icon.

4. Select the radio frequency with Tune , Seek , SCAN, or open the tab and select from stored presets.

u The band, frequency, and available subchannel number are displayed.

1

Playing FM/AM Radio

“Radio Select FM/AM”

You can control the radio using voice control commands.

2 Radio Commands P. 235

A visual guide helps you operate the audio system.

2 System Controls P. 4

2 Basic Operation P. 10

The radio can receive the complete AM and FM bands:

AM band: 530 to 1710 kHz

FM band: 87.7 to 107.9 MHz

You can store six AM stations and 12 FM stations in the presets.

16 CR-Z NAVI-31SZT8500.book 135 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing FM/AM Radio u Audio Screen Control

Audio Screen Control

H HOME u Audio u SOURCE u FM or AM icon

Control the audio system through the navigation screen.

Band Open/Close tab

Operation panel

1. Select the open/close tab on the operation panel to display the station list and preset list.

2. Select Preset tab.

u Select and hold a preset key until a beep sounds to store the current station as a preset.

You can also store the current station as a preset station by selecting and holding the preset key in the operation panel.

Select to display preset 7 onwards.

1

Audio Screen Control

U.S. models

HD Radio TM

HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign

Patents. HD Radio TM and the HD, HD Radio, and

“Arc” logos are proprietary trademarks of iBiquity

Digital Corp.

When an HD Radio TM station is selected, the HD indicator appears on the screen.

Select Station List tab to display the list of stations that can be tuned to.

Preset list


• Scan: Scans for stations with a strong signal in the current band and plays a

10-second sample. Select Cancel to stop scanning and play the current selection.

• Tune : Tunes the radio to the frequency you select.

• Seek : Search up and down the selected band for a station with a strong signal.

• TAG: Displays the information on the song played from the HD Radio TM Station.

135

136

16 CR-Z NAVI-31SZT8500.book 136 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing FM/AM Radio u Audio Menu

Audio Menu

H HOME u Audio (in FM/AM mode) u MENU

Select an item.


• View Radio Text: Displays the text information broadcast by the current RDS station.

• Scan: Scans for stations with a strong signal in the current band and plays a 10second sample. Select Cancel to stop scanning and play the current selection.

• Station List: Displays the list of stations that can be tuned.

• Save Preset: Stores the station into the preset memory.

• Change Source: Changes the audio source mode.

• Save Song Tag: Displays the TAG information saved to the audio system when an HD Radio TM station is selected.

• Song Tag List: You can store the TAG information in the connected iPod/iPhone.

• HD Subchannel: Displays the subchannel list when an HD Radio TM station is selected.

• Sound: Displays the sound preferences screen.


1

Audio Menu

U.S. models iTunes Tagging

“iTunes” in “iTunes Tagging” is a trademark of

Apple Inc.

If the iPod/iPhone is connected, the tag is transferred to the device immediately.

If the iPod/iPhone is not connected to the audio system, the information is stored in the audio unit temporarily. When the device is connected to the system, the data is transferred to the iPod/iPhone.

Available operating functions vary on models. Some functions may not be available on the vehicle’s audio system.

16 CR-Z NAVI-31SZT8500.book 137 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing FM/AM Radio u Audio Menu

■

Radio Data System

H HOME u Audio (in FM/AM mode) u MENU u Station List

Provides text data information related to your selected RDS-capable FM station.

Select one of the stations.

1

Radio Data System

To update the station list manually, select Refresh.

137


138

Playing a Disc

How to access the disc slot

(Eject) button

Press the (Eject) button to open the screen.

u The screen folds back, and the CD slot appears.

1

Playing a Disc

“Disc play”

You can control the disc using voice commands.

2 Disc Commands P. 236

Press the (CLOSE) button to return the screen to the upright position.




In some cases, the name of the artist, album, or track may not appear correctly.

Do not use discs with adhesive labels. The label can cause the disc to jam in the unit.

WMA and ACC tracks protected by digital rights management (DRM) cannot be played. The audio system displays Unplayable File, then skips to the next track.

(CLOSE) button

Selecting Disc Mode


2. Select SOURCE.

3. Select the Disc icon.

4. Insert a disc into the disc slot.

u The disc automatically begins playing.

5. Select the track with Folder Track , or open the tab and select from the track list.

u The track number and track name are displayed. Text information stored on

MP3/WMA/AAC discs is also displayed.

If there is a problem, you may see an error message on the display.

2 Error Messages P. 212

1

How to access the disc slot

If you eject the disc but do not remove it from the slot, the system reloads the disc automatically after several seconds.

Do not use the folded down screen as a tray.



H HOME u Audio u SOURCE u Disc icon


Disc mode Open/Close tab

Operation panel

1. Select the open/close tab on the operation panel to display the track list.

u You can also display the list by selecting the track name.

2. Select a track.

u Select the (folder) tab to display the list of folders on

MP3/WMA/AAC discs having a folder structure.

2 Playing MP3/WMA/AAC Discs

P. 140

uu Playing a Disc u Audio Screen Control

Track list

The following items are available, depending on the type of disc:

• Folder : Select the previous or next folder on MP3/WMA/AAC discs having a folder structure.

• Track within a track.

: Select the previous or next track. Select and hold to move rapidly

139

140

16 CR-Z NAVI-31SZT8500.book 140 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing a Disc u Playing MP3/WMA/AAC Discs

Playing MP3/WMA/AAC Discs

H HOME u Audio u SOURCE u Disc icon

Change the folder on MP3/WMA/AAC discs that have tracks stored in a folder structure.

1. Select the (folder) tab on the track list.

2. Select a folder.

u The system displays the track list.

3. Select a track.

u The system begins playing the selected track.

Folder list

1

Playing MP3/WMA/AAC Discs

Folder List

• Any tracks not in a folder are automatically added to a Root folder, which is displayed at the top of the folder list.

• If the root folder has additional folders in a lower layer, they are listed on the screen.


Audio Menu

H HOME u Audio (in Disc mode) u MENU

Select an item.

uu Playing a Disc u Audio Menu

1

Audio Menu

To stop repeat- or random-play, select the current play mode again.


• Scan: Scans for a track and plays a 10-second sample. Select Cancel to stop scanning and play the current selection.

– Scan Folders (MP3/WMA/AAC): Scans the first track in each folder on the disc.

– Scan Tracks: Scans all tracks on the disc (or in the selected folder).

• Music Search: Selects a track from the Music Search list. When the MP3/WMA/

AAC disc is playing, you can switch the display contents of the list by using the tab.


• Random/Repeat:

– Repeat Folder (MP3/WMA/AAC): Repeats all tracks in the current folder.

– Repeat Track: Repeats the current track.

– Random All Tracks: Plays all tracks on the current disc in random order.

– Random in Folder (MP3/WMA/AAC): Plays all tracks in the current folder in random order.



141

142

16 CR-Z NAVI-31SZT8500.book 142 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing a Disc u Recommended Discs

Recommended Discs

• Use only high-quality CD-R or CD-RW discs labeled for audio use.

• Use only CD-R or CD-RW discs on which the recordings are closed.

• Play only standard round-shaped discs.

The disc packages or jackets should have one of these symbols.

1

Recommended Discs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.

■ Discs with MP3, WMA, or AAC Tracks

• Some software files may not allow for audio play or text data display.

• Some versions of MP3, WMA, or AAC formats may be unsupported. If an unsupported track is found, the audio unit displays Unsupported, and then skips to the next track.


Playing an iPod

■

Connecting an iPod

1

Connecting an iPod

• We recommend connecting the iPod with the USB adapter cable.

• Do not connect the iPod using a hub.

• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.

• We recommend backing up your data before using the device in your vehicle.

• Displayed messages may vary depending on the device model and software version.

Your audio system may not work with all software versions of these devices.

If the audio system does not recognize the iPod, try reconnecting it a few times or reboot the device.

1. Open the USB cover.

2. Install the iPod dock connector to the USB connector.

■

Model Compatibility

Model iPod (5th generation) iPod classic 80GB/160GB (launched in 2007) iPod classic 120GB (launched in 2008) iPod classic 160GB (launched in 2009) iPod nano (1st to 7th generation) iPod touch (1st to 5th generation) iPhone 3G / iPhone 3GS / iPhone 4 / iPhone 4s / iPhone 5

143

144

16 CR-Z NAVI-31SZT8500.book 144 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing an iPod u Selecting iPod Mode

Selecting iPod Mode


2. Select SOURCE.

3. Select the iPod icon.

u The iPod automatically begins playing.

1

Playing an iPod

“iPod play”

You can control the iPod using voice commands.

2 iPod Commands P. 236





Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.





H HOME u Audio u SOURCE u iPod icon


iPod mode Open/Close tab



2. Select a track.

u Select the tab to change songs in the track list.

Operation panel uu Playing an iPod u Audio Screen Control

Track list


• Song : Select the previous or next track. Select and hold to move rapidly within a track.

145

146

16 CR-Z NAVI-31SZT8500.book 146 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing an iPod u Audio Menu

Audio Menu

H HOME u Audio (in iPod mode) u MENU

Select an item.

1

Audio Menu

To stop repeat- or shuffle-play, select the current play mode again.


• Music Search: Selects a track from the Music Search list.

2 Searching for Music P. 147


• Shuffle/Repeat:

– Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, podcasts, genres, composers or audiobooks) in random order.

– Repeat Song: Repeats the current track.

– Shuffle All Songs: Plays all available files in a selected list (playlists, artists, albums, songs, podcasts, genres, composers or audiobooks) in random order.



16 CR-Z NAVI-31SZT8500.book 147 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing an iPod u Searching for Music

Searching for Music

H HOME u Audio (in iPod mode) u MENU u Music Search

Search for music using the iPod menu.

1. Select a search category (e.g.,

Albums).

2. Select an item.

u The selection begins playing.

u If you select the Alphabet

Search key on the left part of the list and then select a letter, the selected letter is displayed at the top of the list.

1

Searching for Music

The order of the track list displayed if you select All on the iPod menu varies depending on the iPod model and software.

Alphabet Search

You can use the Alphabet Search function when you select the following categories:

• Playlists

• Artists

• Albums

• Songs

• Genres

• Podcasts

• Composers

• Audiobooks

Alphabet Search

147

148

16 CR-Z NAVI-31SZT8500.book 148 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing an iPod u Song By Voice TM (SBV)

Song By Voice

TM

(SBV)

Use SBV to search for and play music from your iPod or USB flash drive using voice commands.

■

Searching for music using Song By Voice

TM

(SBV)

1. Set the Song by Voice setting to

On.

2 Voice Recognition Settings

P. 71

2. Press the (Talk) button and say

“Music Search” to activate the

SBV feature for the iPod and USB flash drive.

1

Searching for music using Song By Voice TM (SBV)

Song By Voice TM commands are available for tracks stored on the iPod or USB flash drive.

2 Song By Voice TM commands P. 237

You can add phonetic modifications of difficult words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands.

2 Phonetic Modification P. 149

Once you have canceled this mode, press the

(Talk) button and say “Music Search” again to reactivate this mode.

3. Press the (Talk) button and say a command.

u Example 1: Say “List ‘Artist A’“ to view a list of songs by that artist. Select the desired song to start playing.

u Example 2: Say “Play ‘Artist A’“ to start playing songs by that artist.

4. To cancel SBV, press the

(Hang-Up/Back) button on the steering wheel. The selected song continues playing.


■

Phonetic Modification

H HOME u Settings u System u Voice Recog tab u Song By Voice Phonetic

Modification

1

Phonetic Modification

You can store up to 2,000 phonetic modification items.

Add phonetic modifications of difficult or foreign words so that it is easier for SBV to recognize artists, songs, albums, and composers in voice commands when searching for music on the iPod or USB flash drive.

1. Select New Modification.

u If you want to modify the item already stored, select the item and proceed with step 5.

2. Select USB or iPod.

Continued 149

150


3. Select the item to modify (e.g.,

Artist).

u The list of the selected item appears on the screen.

4. Select an entry (e.g., Artist A).

u The pop-up menu appears on the screen.

5. Select Modify.

u To listen to the current phonetic modification, select

Play.

u To delete the current phonetic modification, select Delete.

6. Enter the phonetic spelling you wish to use (e.g., “ABCD”) when prompted.

7. Select OK to exit. The artist “Artist

A” is phonetically modified to

“ABCD.” When in the SBV mode, you can press the (Talk) button and use the voice command “Play

‘ABCD’” to play songs by the artist

“Artist A.”


Playing Pandora®

Pandora is a personalized Internet radio service that selects music based on an artist, song, or genre a user enters, and streams what is likely to be of interest.

1

Playing Pandora®

“Pandora play”

Selecting Pandora® Mode

1. Connect a compatible phone through Bluetooth®.

u You can also connect the phone using your dock connector to the USB port if you use the iPhone.


3. Select SOURCE.

4. Select the PANDORA icon.

u A pop-up message may appear on your phone requesting you to allow access for the app to launch.

u The current station name, artist name, rating, and track name are displayed.

Pandora is available on U.S. models only.

You can control Pandora using voice commands.

2 Pandora® Commands P. 237




Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of

Pandora Media, Inc., used with permission. Pandora is currently available exclusively in the United States.

To use this service in your vehicle, the Pandora app must first be installed on your smartphone. Visit

www.pandora.com for more information.



151

16 CR-Z NAVI-31SZT8500.book 152 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing Pandora® u Audio Screen Control


H HOME u Audio u SOURCE u Pandora icon

Control the audio screen through the navigation system.

Pandora mode Open/Close tab

1. Select the open/close tab on the operation panel to display the station list.

u You can also display the list by selecting the station name.

2. Select a station.

Operation panel

1



The following functions are not available on this navigation system:

• Buy from iTunes

• Email the Current Station

• Check Song Detail

You can skip the song or select only a predetermined number of times in an hour. If exceeded, an error message is displayed and the operation is not performed.

For details, please visit and check www.pandora.com.

If you cannot operate Pandora® through the audio system, it may be streaming through Bluetooth®

Audio. Make sure Pandora mode on your audio system is selected.

152

•

•

•

•

Station list


Station : Select a station.

(Skip Forward): Skip the current song.

(Play/Pause): Resume or play a song.

(Dislike): Dislikes the current song and skips to the next song. Pandora will avoid playing songs similar to the one disliked.

(Like): Likes the current song. Pandora will play songs similar to the one liked.


Audio Menu

H HOME u Audio (in Pandora® mode) u MENU

Select an item.

uu Playing Pandora® u Audio Menu

1

Audio Menu



• Bookmark: Bookmarks the current song or artist. Select Bookmark Track or

Bookmark Artist.

• Station List: Displays the list of all of your stored stations. Select a station from the list to play. You can also select Shuffle to play all stations randomly.

• New Station: Create a new station from genre, current track, or artist. Select

Genre, Current Track, or Current Artist.




153

154


Playing a USB Flash Drive

■

Connecting a USB Flash Drive

1

Connecting a USB Flash Drive

• We recommend connecting the USB flash drive with the USB adapter cable.

• Do not connect the USB flash drive using a hub.

• Do not use a device such as a card reader or hard disk drive, as the device or your tracks may be damaged.

• We recommend backing up your data before using the device in your vehicle.

• Up to two USB devices can be connected.

1. Open the USB cover.

2. Install the USB flash drive to the USB connector.

■

USB Flash Drives

A USB flash drive of 256 MB or higher is recommended.

Some digital audio players may not be compatible.

Some USB flash drives (e.g., a device with security lockout) may not work.

Some software files may not allow for audio play or text data display.

Some versions of MP3, WMA, or AAC formats may be unsupported.


Selecting USB Mode


2. Select SOURCE.

3. Select the USB icon.

u The USB flash drive automatically begins playing.

uu Playing a USB Flash Drive u Selecting USB Mode

1

Playing a USB Flash Drive

“USB play”

You can control the USB flash drive using voice commands.

2 USB Commands P. 236





Tracks on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

The audio system displays Unplayable File, and then skips to the next track when the following tracks are played:

• Tracks in WMA or AAC format protected by digital rights management (DRM)

• Tracks in unsupported format



155

16 CR-Z NAVI-31SZT8500.book 156 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing a USB Flash Drive u Audio Screen Control


H HOME u Audio u SOURCE u USB icon


USB mode Open/Close tab



2. Select a track.

u Select the tab to change songs in the track list.

Operation panel

156

Track list


•

•

Folder

Track within a track.

: Select the previous or next folder.

: Select the previous or next track. Select and hold to move rapidly


Audio Menu

H HOME u Audio (in USB mode) u MENU

Select an item.

uu Playing a USB Flash Drive u Audio Menu

1

Audio Menu

To stop repeat- or random-play, select the current play mode again.


• Scan: Scans for track and plays a 10-second sample. Select Cancel to stop scanning and play the current selection.

– Scan Folders: Scans the first track in each folder.

– Scan Tracks: Scans all tracks on the USB flash drive (or in the selected folder).

• Music Search: Selects a track from the Music Search list. You can switch the display contents of the list by using the tab.


• Random/Repeat:

– Repeat Folder: Repeats all tracks in the current folder.

– Repeat Track: Repeats the current track.

– Random All Tracks: Plays all tracks on the USB flash drive in random order.

– Random in Folder: Plays all tracks in the current folder in random order.



• Switch USB Device: Change the USB device to play when two USB devices are connected.

157

158


Playing Bluetooth® Audio

Your audio system allows you to listen to music tracks stored on your Bluetoothcompatible phone.

This function is available when the phone is linked to the vehicle’s Bluetooth®

HandsFreeLink® (HFL) system.


Selecting Bluetooth® Audio Mode

1. Make sure that your phone is on, paired, and linked to HFL.



3. Select SOURCE.

4. Select the Bluetooth icon.

5. Select the track with Group or Track , or open the tab and select from the track list.

u The current track name and artist name are displayed.

Check the following if the phone is not recognized:

• Another HFL-compatible phone, which is not compatible for Bluetooth Audio, is already connected.

1

Playing Bluetooth® Audio

You can control the Bluetooth Audio using voice commands.

2 Bluetooth® Audio Commands P. 237

Not all Bluetooth-enabled phones with streaming audio capabilities are compatible. To check if your phone is compatible:

• U.S.: Visit handsfreelink.honda.com.

• Canada: Visit www.handsfreelink.ca.

In some states, it may be illegal to perform some data device functions while driving.


Only one phone can be used with HFL at a time.

When there are more than two paired phones in the vehicle, the first paired phone the system finds is automatically linked.

If more than one phone is paired to the HFL system, there may be a delay before the system begins to play.

16 CR-Z NAVI-31SZT8500.book 159 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing Bluetooth® Audio u Switching to HFL Mode

Switching to HFL Mode

(Pick-Up) button

(Hang-Up/Back) button

1. If you receive a call when

Bluetooth Audio is playing, press the (Pick-Up) button on the steering wheel to answer the call.

2 Bluetooth® HandsFreeLink®

P. 166

2. Press the (Hang-Up/Back) button to end the call, and

Bluetooth® Audio is resumed.

1

Switching to HFL Mode

You can also select Answer or Hang Up on the screen to receive or end a call.

159

160

16 CR-Z NAVI-31SZT8500.book 160 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing Bluetooth® Audio u Audio Screen Control


H HOME u Audio u SOURCE u Bluetooth icon


Bluetooth® Audio mode

Select a track.

1


The display items may vary depending on the connected device.

Some devices select a track from the list displayed on the screen.

The following functions may not be available on some devices:

• Pause function

• Group selection

Operation panel


•

•

•

•

(Play): Plays a song.

(Pause): Pauses a song.

Group

Track

: Select the previous or next group.

: Select the previous or next track. Select and hold to move rapidly within a track.


Audio Menu

H HOME u Audio (in Bluetooth Audio mode) u MENU

Select an item.

uu Playing Bluetooth® Audio u Audio Menu

1

Audio Menu

The Music Search function may be available on some devices. Select a track from the Music Search list.





161

162


Playing a Video Using the HDMI

TM

■

Connecting an HDMI

TM

Cable

Your audio system allows you to play videos from an HDMI TM -compatible device when the vehicle is stopped.

Connect the device using an HDMI TM cable, and then select the HDMI TM mode.

1. Open the HDMI TM jack cover.

2. Connect an HDMI TM -compatible device to the input jack using an

HDMI TM cable.

1

Playing a Video Using the HDMI TM

“Auxiliary play”

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

■

Recommended Video Files

Video File Types

Profile (MP4 version) Baseline Level 3 (MPEG4-AVC), Simple Level 5 (MPEG4)

File extension (MP4 version) .mp4/.m4v

Compatible audio codec MPEG4-AVC (H.264) MPEG4 (ISO/IEC 14496 Part.2)

Bit rate 10 Mbps (MPEG4-AVC) 8 Mbps (MPEG4)

Maximum image 720 × 576 pixels

1

Recommended Video Files

DivX® files are not compatible.

16 CR-Z NAVI-31SZT8500.book 163 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Playing a Video Using the HDMI TM u Selecting HDMI TM Mode

Selecting HDMI

TM

Mode


2. Select SOURCE.

3. Select the HDMI TM icon.

u The video automatically begins playing.

163

164




This section describes how to operate Bluetooth® HandsFreeLink®. You can place and receive phone calls using your vehicle’s audio system without handling your cell phone.

Bluetooth® HandsFreeLink® ................. 166

Pairing a Phone .................................... 168

Bluetooth Setting ................................. 170

Automatic Phone Sync ......................... 174

Setting Up Speed Dialing...................... 175

Phonebook Phonetic Modification ........ 178

Phone Setting ...................................... 180

Making a Call....................................... 181

Receiving a Call .................................... 185

HFL Menus ........................................... 186

Text/E-mail Message ............................ 190

Text/Email Setting ................................ 192

HondaLink Assist .................................. 193

165

166



■ Phone Screen

Bluetooth indicator Battery level

Signal strength


• Speed Dial tab: Displays the list of stored speed dial entries.

2 Using Speed Dial P. 184

• Call History tab: Displays the call history list.

2 Using Call History P. 184

Select an item.

u Select the tab on the phone screen to open the full list. Flick or slide the list to scroll.

1


You can control the HFL system using voice commands.

2 HFL Menus P. 186

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:



Voice Control Tips

• Close the windows, as noise coming from them may interfere with the microphones.

• Press and release the (Talk) button before giving a command. Speak clearly and naturally after a beep.

2 Voice Control Operation P. 6

• If the microphones pick up voices other than yours, the command may be misinterpreted.

• When HFL is in use, navigation voice commands cannot be recognized.

• To change the volume level, use VOL (volume) or the remote audio controls.

Some phones may send battery, signal strength, and roaming status information to the screen.

16 CR-Z NAVI-31SZT8500.book 167 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u

■ Phone Menu Screen

1. Select MENU on the Phone screen.

2. Select an item.


• Speed Dial: Makes a call to stored speed dial entries.


• Redial: Dials the last number.

• Call History: Displays the call history.


• Phonebook: Displays the cell phone’s imported phonebook.

2 Using the Phonebook P. 182

• Dial: Makes a call by entering the phone number.

2 Entering a Phone Number P. 183

• Text/Email: Displays received text messages list. unread message.

2 Text/E-mail Message P. 190

is displayed if there is an

1


Bluetooth® Wireless Technology

Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motor Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations

An incoming call on HFL will interrupt the audio system when it is playing. Audio will resume when the call is ended.

Certain touchscreen functions are disabled while the vehicle is moving.


State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

167

168

16 CR-Z NAVI-31SZT8500.book 168 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Pairing a Phone

Pairing a Phone

H HOME u Phone

When no Bluetooth®-compatible phone has ever been paired to the system, the following screen appears:

1. Select Yes.

2. Put your cell phone in “Discovery” or “Search” mode.

3. Select Continue.

u The system begins to search for your phone.

4. Select your phone in the list.

u Select Refresh if your phone is not found.

u Refer to your phone’s manual for instructions on searching for a Bluetooth device.

5. Enter or confirm the pairing code on your phone when prompted to complete the pairing process.

u After completing the pairing process, the system prompts

you to turn on HondaLink Assist

and Automatic Phone Sync.

2 HondaLink Assist P. 193

2 Automatic Phone Sync

P. 174

1

Pairing a Phone

Your Bluetooth-compatible phone must be paired to

HFL before you can make and receive hands-free calls.

Phone Not Found

If your phone still does not appear, select Phone Not

Found to search for the system from the Bluetoothcompatible phone. Refer to your phone’s manual.

Phone Pairing Tips

• You cannot pair your phone while the vehicle is moving.

• Your phone must be in discovery or search mode when pairing the phone. Refer to your phone’s manual.

• Up to six phones can be paired.

• Your phone’s battery may drain faster when it is paired to HFL.

• If your phone is not ready for pairing or not found by the system within a few minutes, the system will time out and returns to idle.

Pairing Code

The default pairing code “0000” is used unless you change the setting.

You can change the pairing code setting.

2 Changing the Pairing Code P. 171

16 CR-Z NAVI-31SZT8500.book 169 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Pairing a Phone

■

Pairing from Phone Setting

H HOME u Settings u Phone u Phone tab u Connect Phone

Use the Phone settings to pair an additional Bluetooth®-compatible phone if a phone has been previously paired to the system.

1. Select Add Bluetooth Device.

2. Put your cell phone in “Discovery” or “Search” mode.

3. Select Continue.

u The system begins to search for your phone.

4. Select your phone in the list.

u Select Refresh if your phone is not found.

u Refer to your phone’s manual for instructions on searching for a Bluetooth device.

5. Enter the pairing code on your phone when prompted to complete the pairing process.

u After completing the pairing process, the system prompts

you to turn on HondaLink Assist

and the Automatic Phone Sync.



1

Pairing from Phone Setting



Select another paired phone from the list to connect another phone.

169

170

16 CR-Z NAVI-31SZT8500.book 170 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Bluetooth Setting

Bluetooth Setting

H HOME u Settings u Bluetooth

Select an item.


• Bluetooth On/Off Status: Turns the Bluetooth system on or off.

• Bluetooth Device List: Displays the list of paired phones.

2 Editing the Paired Phone Name P. 172

2 Deleting a Paired Phone P. 173

• Edit Pairing Code: Changes the pairing code.

2 Changing the Pairing Code P. 171


■

Changing the Pairing Code

H HOME u Settings u Bluetooth u Edit Pairing Code

1. Select Fixed.

2. Delete the current paring code.

3. Enter a new paring code and select OK.

1

Changing the Pairing Code

When your phone is not found by the system and you have to initiate the process from your phone, you need to enter the pairing code from your phone.

Random

Uses a randomly generated pairing code.

The default pairing code is “0000” until you change the setting.

Continued 171

172


■

Editing the Paired Phone Name

H HOME u Settings u Bluetooth u Bluetooth Device List

1. Select a phone to edit the name.

2. Select Edit Device Name.

3. Edit the name and select OK.


■

Deleting a Paired Phone

H HOME u Settings u Bluetooth u Bluetooth Device List

1. Select a phone to delete.

2. Select Delete This Device.

3. Select Yes.

1

Deleting a Paired Phone

When you transfer the vehicle to a third party, delete all paired phones.

173

174

16 CR-Z NAVI-31SZT8500.book 174 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Automatic Phone Sync

Automatic Phone Sync

When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL.

Select On.

1

Automatic Phone Sync

You can also set from the Phone settings screen.

Select HOME and then select Settings. Select

Phone, and then select Automatic Phone Sync.

2 Phone Setting P. 180

If you switch to Off after importing the phonebook and call history, all imported data is deleted.

On some phones, it may not be possible to import the phonebook and call history to HFL.

The phonebook is updated after every connection.

Call history is updated after every connection or call.

Make sure your phone's settings allow for automatic phone sync.

Up to 2,000 contacts in the phonebook and 20 numbers each for All, Dialed, Received, and Missed calls can be imported.

When On is selected, you can say a name and phone type from the phonebook to make a call on the Voice

Portal screen. For example, say “Call

John Smith mobile.”


Setting Up Speed Dialing

H HOME u Settings u Phone u Phone tab u Edit Speed Dial

Create speed dial entries with voice tags for easy calling.

1. Select New Entry.

2. Select a number entry option.

3. Select the number and enter the name.

u The system prompts you to store a voice tag when you select Import from

Phonebook or Import from

Call History.

2 Registering a Voice Tag to a

Speed Dial Entry P. 176


• Manual Input: Enters a number manually.

• Import from Call History: Selects a number from the call history.

• Import from Phonebook: Selects a number from the imported phonebook.

Continued uu Bluetooth® HandsFreeLink® u Setting Up Speed Dialing

1

Setting Up Speed Dialing



Up to 20 speed dial entries can be stored per phone.

Import from Phonebook and Import from Call

History can be selected only when Automatic

Phone Sync is set to On.


175

176

16 CR-Z NAVI-31SZT8500.book 176 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Setting Up Speed Dialing

■

Registering a Voice Tag to a Speed Dial Entry


1. Select a speed dial entry.

2. Select Edit.

3. Select Voice Tag.

4. Select Record.

5. Select Record again.

u Using the (Talk) button, follow the prompt to enter a voice tag.

1

Registering a Voice Tag to a Speed Dial Entry

Voice tags allow you to call speed dial entries from the Voice Portal screen by saying the voice tag name

2 Making a Call P. 181

• Avoid using duplicate voice tags.

• Avoid using “Home” as a voice tag.

• It is easier for HFL to recognize a longer name (e.g.,

“John Smith” instead of “John”).

Select Delete to delete the stored speed dial entry.

16 CR-Z NAVI-31SZT8500.book 177 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Setting Up Speed Dialing

■

Editing a Voice Tag



2. Select Edit.

3. Select Voice Tag.

4. Select an item.


• Play: Plays the stored voice tag.

• Record: Stores a new voice tag. Follow the prompt to enter a voice tag.

• Clear: Deletes the stored voice tag.

177

178

16 CR-Z NAVI-31SZT8500.book 178 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Phonebook Phonetic Modification

Phonebook Phonetic Modification

Add a voice tag to the contact name of a phonebook so that it is easier for HFL to recognize voice commands.

■

Adding a New Voice Tag

H HOME u Settings u System u Voice Recog tab u Phonebook Phonetic

Modification

1. Select the phone you want to add a voice tag to.

2. Select New Voice Tag.

1

Adding a New Voice Tag

Up to 20 phonetic voice tags per phone can be stored.

You can only add a new voice tag for the currently connected phone.

Select Search to select a contact name by entering the name directly.

You can also add a Voice Tag for a speed dial.

2 Setting Up Speed Dialing P. 175

3. Select a contact name.

4. Select Modify.

5. Select Record.

u Using the (Talk) button, follow the prompts to complete the voice tag.

16 CR-Z NAVI-31SZT8500.book 179 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Phonebook Phonetic Modification

■

Editing a Voice Tag

H HOME u Settings u System u Voice Recog tab u Phonebook Phonetic

Modification

1. Select the phone you want to edit a voice tag for.

2. Select a contact name you want to modify.

1

Editing a Voice Tag

You can only modify or delete contact names for the currently connected phone.

Select Delete All to delete all stored voice tags.

Select Delete to delete a stored voice tag.

Selecting Play, you can check the stored voice tag.

3. Select Modify.

4. Select Record.

u Using the (Talk) button, follow the prompts to complete the voice tag.

179

16 CR-Z NAVI-31SZT8500.book 180 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Phone Setting

Phone Setting

H HOME u Settings u Phone u Phone tab

Set HFL options and features.

Select an item.

1

Phone Setting



180


• Connect Phone: Connects another paired device.

2 Pairing from Phone Setting P. 169

• Bluetooth Device List: Displays the list of paired devices.

2 Editing the Paired Phone Name P. 172

2 Deleting a Paired Phone P. 173

• Edit Speed Dial: Creates, edits, and deletes speed dial entries.


• Ring Tone: Sets the ring tone.

Fixed: Uses the built-in ring tone of the system.

Mobile Phone (factory default): Uses the ring tone set for the phone.

• Automatic Phone Sync: Imports the phonebook and call history of the paired phone automatically.


• HondaLink Assist: Turns HondaLink Assist on or off.

On: When a crash is detected, the vehicle will attempt to call emergency services automatically.

Off (factory default): Disables the feature.


16 CR-Z NAVI-31SZT8500.book 181 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Making a Call

Making a Call

Make calls by entering a number or using the imported phonebook, call history, or speed dial entries.





1

Making a Call



When you say the voice tag or phonebook name the following screen appears and the system begins calling.


2 Registering a Voice Tag to a Speed Dial

Entry P. 176

2 Adding a New Voice Tag P. 178

Continued

Only one phone can be used with HFL at a time.

When there are more than two paired phones in the vehicle, the first paired phone the system finds is automatically linked.

You can redial the last number called by pressing and holding the (Pick-Up) button for more than two seconds.

181

182


■

Using the Phonebook

H HOME u Phone u MENU u Phonebook

1. Select a name.

u Select alphabetical tabs to display the entries in the group.

u Select Search to select a name by entering the name directly.

2. Select a number.

u The system begins dialing.

1

Using the Phonebook

Up to three icons are displayed for each phonebook entry. If there are more than three numbers for an entry, … is displayed.

Home Fax

Mobile

Preference

Car

Voice

Work Other

Pager

This feature is not available on all phones.


■

Entering a Phone Number

H HOME u Phone u MENU u Dial

1. Enter a phone number.

2. Select Dial or press the (Pick-

Up) button to begin dialing.

1

Entering a Phone Number

A command that consists of several words can be spoken together. For example, say “123-456-

7890” at once. You can also say a phone number from the voice portal screen.

Symbol commands, such as #, *, +, or Pause cannot be spoken together with numbers. Say these commands individually.

This function is disabled while the vehicle is moving.

However, you can call a stored voice tagged speed dial number, phonebook name, or number using voice commands.



2 Phonebook Phonetic Modification P. 178

Continued 183

184


■

Using Call History

H HOME u Phone u MENU u Call History

1. Select a call.

u Select All, Dialed, Received, and Missed tabs to view the call history by category.


■

Using Speed Dial

H HOME u Phone u MENU u Speed Dial



1

Using Call History

The call history displays the last 20 dialed, received, or missed calls (appears only when a phone is connected to HFL).

These icons next to the number indicate the following:

: Dialed calls

: Received calls

: Missed calls

You can also select a call on the Phone screen.

2 Phone Screen P. 166

1

Using Speed Dial

To make a call using speed dial, you need to create speed dial entries.


You can also select a speed dial entry on the Phone screen.

2 Phone Screen P. 166

You can add a new speed dial entry by selecting New

Entry.


16 CR-Z NAVI-31SZT8500.book 185 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u Receiving a Call

Receiving a Call

When there is an incoming call, an audible ring tone sounds and the Incoming call screen appears.

Call ID

1. Select Answer or press the

(Pick-Up) button to answer a call and display the In call screen.

2. Select Hang Up or press the

(Hang-Up/Back) button to terminate the call.

1

Receiving a Call

An incoming call notification appears on the navigation screen and you hear an audible ring tone.

Press the (Hang-Up/Back) button or select

Ignore on the Incoming call screen to ignore the call.

If your phone has call waiting, “Second incoming call” appears on the screen. Select Swap Calls or press the (Pick-Up) button to put the original call on hold and answer the incoming call. To return to the original call, select Swap Calls or press the

(Pick-Up) button again. To ignore the second incoming call completely, select Ignore. If you want to hang up the original call and answer the new call, select Hang Up or press the button.

(Hang-Up/Back)

To change the volume level of HFL, use VOL (volume) or the steering wheel volume controls.

When you use the phone mode, Incoming call is displayed in full-screen. When you use the other mode, it is displayed in split-screen.

The following options are available during a call:

• Transfer: Allows you to transfer a call from HFL to your phone, or from your phone to HFL.

• Mute: Allows you to mute your voice.

• Touch Tones (available on some phones): Allows you to send numbers or names during a call. This is useful when you call an automated phone system.

185

186

16 CR-Z NAVI-31SZT8500.book 186 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Bluetooth® HandsFreeLink® u HFL Menus

HFL Menus

The power mode of the vehicle must be in ACCESSORY or ON to use HFL.

■ Phone Setting screen

1. Select HOME and then select

Settings.

2. Select Phone.

1

HFL Menus

To use HFL, you must first pair your Bluetooth®compatible phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is cancelled.

Phone Connect Phone

2 Pairing from Phone

Setting P. 169

Bluetooth Device List

Add Bluetooth Device Pair a phone to the system.

(Existing entry list)

Disconnect *1

Connect a phone to the system.

Disconnect a paired phone from the system.

(Existing entry list) *1 Edit Device Name Edit a previously paired phone name.

2 Editing the Paired Phone

Name P. 172

Add Bluetooth Device

Delete This Device Delete a previously paired phone.

2 Deleting a Paired Phone

P. 173

Pair a phone to the system.

*1: Appears only when a phone is connected to HFL.


Text/Email

2 Text/Email

Setting P. 192

Default

Edit Speed Dial *1

2 Setting Up Speed

Dialing P. 175

New Entry Manual Input

Enter a phone number to store as a speed dial number.

Import from Call History

Select a phone number from the call history to store as a speed dial number.

Import from Phonebook

Select a phone number from the phonebook to store as a speed dial number.

(Existing entry list) Edit

Edit a previously stored speed dial number.

• Change a name.

• Change a number.

• Create or delete a voice tag.

Turn HondaLink Assist on or off.

Delete

Delete All Delete all of the previously stored speed dial numbers.

Ring Tone *1

Select the ring tone.

Automatic Phone Sync *1 Set phonebook and call history data to be automatically imported when a phone is paired to HFL.


HondaLink Assist *1

Delete a previously stored speed dial number.

Enable Text/Email *1

Turn the Text/E-mail Message function on and off.

Select Account *1 Select a text or e-mail message account.

New Message Notification *1 Select whether a pop-up alert comes on the screen when HFL receives a new text/e-mail

Message.

Cancel/Reset all customized items in the Phone settings group as default.


Continued 187

188


■ Phone menu screen

1. Select HOME and then select

Phone.

2. Select MENU.

Speed Dial *1

2 Using Speed

Dial P. 184

Redial *1

Call History *1

2 Using Call

History P. 184

New Entry Manual Input

Import from Call History

Enter a phone number to store as a speed dial number.

Select a phone number from the call history to store as a speed dial number.

Import from Phonebook Select a phone number from the phonebook to store as a speed dial number.

(Existing entry list) Dial the selected number in the speed dial list.

Redial the last number dialed in the phone’s history.

All Display the last 20 outgoing, incoming and missed calls.

Dialed Display the last 20 outgoing calls.

Received Display the last 20 incoming calls.

Missed Display the last 20 missed calls.

Phonebook *1 Display the paired phone’s phonebook.


Dial *1

Search Select a name by entering the name directly.

Enter a phone number to dial.




Text/Email *1 (Existing message list) Reply

Dial

Read/Stop

Select Account Select a text or e-mail message account.

Reply to a received message using one of six fixed phrases.

2 Replying to the Message P. 191

Make a call to the sender.

System reads received message aloud, or stop message from being read.


189


Text/E-mail Message

190

If your paired phone is MAP-compatible, you can receive and hear text or e-mail messages and reply to them using fixed reply messages.


If a text message is received, the following screen is displayed.

1. Select Read.

u The text message is read aloud.

u Select Ignore to check the text message later.

u If the phone number of the sender is stored to the

Phonebook, the name is displayed.

1

Text/E-mail Message

You can control the text messages feature using voice commands.

To use this feature, you need a Bluetooth®- and MAP

(Message Access Profile)-compatible cell phone. For a list of compatible phones and special feature capabilities:



State (provincial in Canada) or local laws may limit your use of the HFL text/e-mail message feature. Only use the text/e-mail message feature when conditions allow you to do so safely.

2. Select an item.

u The entire message body is not displayed while driving.

Text/Email on the Phone menu is grayed out if your connected phone is not compatible.

Select Text/Email from the Phone menu to view a list of the 20 most recently received text and e-mail messages. You can select each one to read, reply, or call back. The list cannot be scrolled while the vehicle is moving.


• Read: Reads the text message aloud. Select Stop to stop reading. Adjust the volume using VOL (Volume).

• Reply: Replies to the message using a fixed reply message. You cannot create your own messages.

2 Replying to the Message P. 191

• Dial: Dials the sender.


■

Replying to the Message

uu Text/E-mail Message u

1. Select the message you want to use.

2. Select Send.

1

Text/E-mail Message

You can set up text message notification when the first message for the paired phone is received. You can change the setting from the Phone settings screen.

2 Text/Email Setting P. 192

If you delete a message on the phone, the message is also deleted in the system. If you send a message from the system, the message goes to your phone’s outbox.

191

192

16 CR-Z NAVI-31SZT8500.book 192 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Text/E-mail Message u Text/Email Setting

Text/Email Setting

H HOME u Settings u Phone u Text/Email tab

Select an item.


• Enable Text/Email: Turns the Text/Email feature on or off.

On (factory default): Text or e-mail messages can be received.


• Select Account: Selects an account to be active and receive notifications. Select

Text Messages for SMS or an E-mail account you want. Only one account can be active at a time.

• New Message Notification: Sets whether to give an incoming message notification.

On: Gives an incoming message notification.

Off: Messages are still received, but without notification.


HondaLink Assist

If your vehicle’s airbags deploy or if the unit detects that the vehicle is severely impacted, your vehicle automatically will attempt to connect to the HondaLink operator. If connected, information about your vehicle, its location and its condition will be sent to the operator; you also can speak to the operator when connected.

To use this function, you need to connect a phone via Bluetooth® in advance.


1. Select Call Now.

u If you do not select Call Now,

HondaLink Assist automatically attempts to call emergency services after 10 seconds.

1

HondaLink Assist

IMPORTANT: Owner activation constitutes authorization for Honda to collect information from your vehicle needed to provide the service, and agreement to the Terms and Conditions at

www.hondalink.com/TermsAndConditions. In a crash, HondaLink Assist will attempt to notify emergency services but NEITHER Honda NOR ITS

SERVICE PROVIDERS GUARANTEE THAT SUCH

NOTIFICATION WILL OCCUR.

Honda reserves the right to terminate HondaLink

Assist services at any time or for any reason, and in the future may not be able to provide services due to changes in, or obsolescence of, technology integral to the service or changes in governmental regulation.

This function may not work properly depending on the phone, carrier, or contract conditions.

Your vehicle may not be able to connect to the operator if the battery level is low, the line is disconnected, or you do not have adequate cellular coverage.

You cannot use emergency services when:

• You travel outside the HondaLink service coverage areas.

• There is a problem with the connecting devices, such as the microphones, speakers, or the unit itself.

Continued 193

194

16 CR-Z NAVI-31SZT8500.book 194 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu HondaLink Assist u

2. Talk to the operator.

u Select Talk Now to talk to the operator immediately.

u The call with the operator may be interrupted to confirm information about your vehicle location.

u Select Hang Up or press the

(Hang-Up/Back) button to hang up the call.

1

HondaLink Assist

You cannot operate other navigation- or phonerelated functions using the screens while talking to the operator.

If the unit fails to connect to the operator, it repeatedly tries until it succeeds.

If you select Cancel or press the (Hang-Up/

Back) button before calling the operator, you can cancel the call.


Other Features

This section describes the useful functions incorporated into the navigation system.

Trip Computer ....................................... 196

Information Functions .......................... 197

System/Device Information ................... 198

Multi-View Rear Camera ...................... 200

195


Trip Computer

H HOME u Info u MENU u Trip Computer

View the distance traveled and average fuel consumption.

Select an item.

1

Trip Computer

Displays the following trip information:

• Instant Fuel Economy: The current estimated instant fuel economy.

• Average Fuel Economy: The average fuel economy since the last key cycle.

• 1st, 2nd, 3rd Prev.: The previous average fuel consumption.

• Range: The estimated distance you can travel on the fuel remaining in the tank.

These values are estimates only.

Select Delete history to delete the trip information.

196


• Current Drive tab: Displays the current trip information.

• History of Trip A tab: Displays information for the three previous drives. The information is stored every time you reset Trip A.


Information Functions

H HOME u Info u MENU

Check the information about the system or the vehicle.

Select an item.


• Traffic Incidents: Displays a list of the traffic incidents around your current location or on your route.

2 Traffic Rerouting TM Manually P. 112

• Clock/Wallpaper: Displays the clock/wallpaper screen.


• System/Device Information: Displays the system and USB device information.

2 System/Device Information P. 198

• Trip Computer: Displays the distance traveled and average fuel consumption.

2 Trip Computer P. 196

• Voice Info: Displays the voice commands list.


1

Information Functions

Info Screen Preference

You can set the Info screen type.

1. Select HOME and then select Settings.

2. Select Clock/Info. Select Info tab, and then select

Info Screen Preference.

3. Select one of the following options:

• Info Top: Displays the pop-up window to prompt you to select Trip Computer or Clock/Wallpaper.

• Info Menu: Displays the pop-up window of the

Info Menu.

• Off (factory default): Does not display any pop-up window.

If you set Remember Last Screen to On, the pop-up windows are not displayed on some screens.

Traffic Incidents are only available in certain areas.

197

198

16 CR-Z NAVI-31SZT8500.book 198 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Information Functions u System/Device Information

System/Device Information

H HOME u Info u MENU u System/Device Information

Check the system and the USB device information.

Select an item.

1

System/Device Information

When you transfer the vehicle to a third party, delete all stored data.


• System Info: Displays the version information of the system.

2 System Information P. 199

• Map Update: Updates the map database via an updated USB device.

2 Map Update P. 199

• USB Info: Displays the information of the connected USB device.

• About Map Update: Displays the information about the map update.

16 CR-Z NAVI-31SZT8500.book 199 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Information Functions u System/Device Information

■

System Information

H HOME u Info u MENU u System/Device Information u System Info

View database, software version, device number, and vehicle identification information.

1

System Information

You will need this information when ordering a map update.

2 Obtaining a Navigation Update P. 225

■

Map Update

H HOME u Info u MENU u System/Device Information u Map Update

Update the map database.

1

Map Update

When you order a map update, it is mailed to you on a USB flash drive.


199


Multi-View Rear Camera

200

Your vehicle is equipped with a multi-view rear camera. When you shift into Reverse, the rear view is displayed on the navigation system screen. The edge of the bumper and parking guidelines are also displayed.

Select HOME to increase brightness or MENU to decrease brightness.

While the rear view is displayed,

Multi-View

Rear Camera switch between wide, normal, and top down view modes.

Screen display

Bumper

Guidelines

Approx. 9.8 ft (3 m)



: Displays in wide view mode.

: Displays in normal view mode.

1

Multi-View Rear Camera

Always keep the camera lens clean and unobstructed. The multi-view rear camera has a lens that makes distances appear different than they actually are. Always take care when reversing, and look behind you for obstacles.

Navigation controls are disabled when in Reverse.

If you turn the guidelines off, they remain off until you turn them back on.

Adjusting the brightness for the multi-view rear camera display does not affect the brightness for the navigation screen.

Canadian models

Press the brightness.

(Display Mode) button to adjust the

If the last used viewing mode is wide or normal, the same mode is selected the next time you set the power mode to ACCESSORY or ON. If top view was last used, wide mode is selected.

: Displays in top down view mode.

Camera




Approx. 1.7 ft

(50 cm)

Tailgate open range

16 CR-Z NAVI-31SZT8500.book 201 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Multi-View Rear Camera u

■

Rear Camera Setting

H HOME u Settings u Camera u Rear Camera


• Fixed Guideline:

– On (factory default): Guidelines appear when you shift into Reverse.

– Off: Guidelines do not appear.

• Dynamic Guideline:

– On (factory default): Guidelines move according to the steering wheel direction.

– Off: Guidelines do not move.

1

Rear Camera Setting

The dynamic guidelines are displayed only on the wide view mode or the normal view mode.

Canadian models

You can also change the rear camera setting by selecting MENU on the rear camera screen. When you select MENU, the following items are available in additional:

• Display: Adjusts the screen preference of the rear camera screen.

– Display tab: Adjusts Brightness, Contrast, and

Black Level of the rear camera screen.

– Color tab: Adjusts Color and Tint of the rear camera screen.

201

202



Troubleshooting

Troubleshooting ....................................204

Map, Voice, Entering Destinations.........204

Traffic ...................................................206

Guidance, Routing ................................207

Update, Coverage, Map Errors ..............208

Smartphone Connection .......................209

Display, Accessories ..............................210

Multi-View Rear Camera .......................210

Miscellaneous Questions .......................211

Error Messages...................................... 212

Navigation System................................ 212

Disc Player............................................ 213

Pandora® ............................................. 214

iPod/USB Flash Drive............................. 216

Bluetooth® HandsFreeLink® .................. 217

Smartphone Connection ...................... 218

203

204


Troubleshooting

Map, Voice, Entering Destinations

The Startup Confirmation screen is displayed every time I start the car.

Problem

The navigation system reboots by itself (returns to the opening screen).

How do I specify a destination when an entered city or street could not be found?

Why do some letters become grayed out when I enter an address?

How do I delete Addresses in my address book, or the Home Address?

I cannot hear the navigation system voice.

Solution

This is normal. The Startup Confirmation screen reminds you and your guest drivers to always operate the navigation system in a safe manner. The Startup

Confirmation screen goes off after a certain period of time, even if you do not select OK.

A reboot can be caused by extreme temperatures or shock from bumpy roads, and does not necessarily indicate a problem. If this happens frequently, please see your dealer.

●

●

Try entering the street first. Some cities are lumped in with a major metro area.

In rural “unverified” areas or new subdivisions, streets may be missing or only partially numbered.

Try selecting the destination directly from the map.


As you enter each letter in an address or a place/landmark, the navigation system looks in the database to see what letters are possible and grays out letters that do not apply.

1. Select HOME > Settings > Navigation > Personal Info tab to display the types of information.

2. Select the type of address to delete.

3. Select Delete.

1. Select HOME > Settings > System > Sound/Beep tab and check that Volume is not set to 00.


2. Select Voice Recog tab on the System settings screen and set Voice Prompt to

On.


16 CR-Z NAVI-31SZT8500.book 205 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Map, Voice, Entering Destinations

Problem

The voice control system is having difficulty recognizing my voice commands.

Solution

● Check that the vents are not blowing air onto the microphones at the top of the navigation screen, the vehicle interior is as quiet as possible, and you are using the correct command when speaking.

2 Voice Recognition P. 25

●

The navigation system pronunciation of destination address sounds strange.

The screen is bright when I drive at night.

The screen is dark when I drive during the day.

How do I change or remove my PIN?

The basic guidance phrases use a studio-recorded voice, but the destination address is pronounced using a machine-generated voice. Consequently, it may be mispronounced or sound strange at times.

1. Check that the nighttime dashboard brightness control is not set to maximum.

2. Press the (Display Mode) button to change the Night mode.

2 Switching Display Mode Manually P. 27

Press the (Display Mode) button to change the Day mode.

2 Switching Display Mode Manually P. 27

1. Select HOME > Settings > Navigation > Personal Info tab > PIN Number >

GO Home 1 PIN or GO Home 2 PIN or Address Book PIN.

2. Enter your existing PIN. You then have the choice to change or remove the PIN.


Your dealer must reset the PIN for you.

I have forgotten my PIN. How do I reset the PIN for

Home or the PIN for address books?

Why is the phone number grayed out on the

Calculate Route screen?

Your phone is not paired to Bluetooth® HandsFreeLink® or, if paired, your phone is in use.

205

206

16 CR-Z NAVI-31SZT8500.book 206 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Traffic

Traffic

Problem

Traffic information is missing or is not displaying properly. What is wrong?

The navigation system sometimes provides a detour route when I am driving a route on the freeway.

The navigation system routes me to an exit and an alternate freeway with unknown flow speeds or surface streets.

How can I ignore the detour route and return to the original route?

Solution

Verify the following:

● Traffic information relies on a clear signal. If signal strength is low, traffic data

● may not be available.

Check that the traffic icons are turned on.

●

●

●


It is possible that there is a temporary technical problem with your metropolitan area traffic. You can call Honda Automobile Customer Service to see if there is an outage.

2 Honda Automobile Customer Service Contact Information P. 224

If the situation persists, see your Honda dealer for assistance.

Traffic information is available only in certain areas.

If Traffic Rerouting is set to On, the navigation system provides a detour route to your destination only if it can find a significantly faster route than the original one.


The navigation system predicts which route should be faster based on freeway congestion along your route. Use your own experience to determine whether the alternate route would be faster.

Select HOME > Settings > Navigation > Routing tab, and set Traffic

Rerouting to Off.


16 CR-Z NAVI-31SZT8500.book 207 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Guidance, Routing

Guidance, Routing

Problem

The navigation system does not route me the same way I would go or the same way as other mapping systems.

The navigation system attempts to generate the optimal route. You can change the route preferences used when calculating a route.


Solution

The street I’m on is not shown on the map screen.

The mapping database is constantly undergoing revision. You can access the most recent information on the internet.

2 Map Coverage P. 225

The vehicle position icon is not following the road and the “GPS icon” text in the upper left hand corner of the screen is white or missing.

●

●

Check that the GPS antenna (located in the dashboard) is not blocked. For best reception, remove items from the dashboard, such as radar detectors, cell phones, or loose articles.

Metallic tinting or other aftermarket devices can interfere with GPS reception.

Please consult your dealer.

2 GPS P. 222

The blue highlighted route and voice guidance stopped or turned into a pink line before I got to my destination.

Your route has entered an unverified area.


Select the map orientation icon on the map screen to select the north-up icon, or How do I stop the map from rotating as I drive along?

Sometimes, I cannot select between the North-up,

Heading-up and 3D map orientations.

The “time to destination” display sometimes increases even though I am getting closer to my destination.

The Heading-up map orientation can only be shown in the lower scales (1/20 - 1 mile (80 m-1.6 km) scales). The 3D map orientation can only be shown in the lower scales (1/20 - 2 mile (80 m-3 km) scales).


If your speed reduces due to slower traffic, the navigation system updates the

“time to destination” based on your actual road speed to give you a better estimate of arrival time.

Continued 207

16 CR-Z NAVI-31SZT8500.book 208 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Update, Coverage, Map Errors

208

Problem

The vehicle position icon on the map “lags” a short distance behind, especially when I arrive at an intersection.

This is normal. The navigation system is unaware of the width of intersections.

Large differences in vehicle position can indicate a temporary loss of the GPS signal.

2 GPS P. 222

The screen is showing white dots as I drive along.

These dots are called “breadcrumbs.” These are displayed if Off-road Tracking is set to On and you drive more than 1/2 mile off mapped roads.


How do I remove the white dots (“breadcrumbs”) from my screen?

Select HOME > Settings > Navigation > Map tab, and set Off-road Tracking to Off, then return to the map.


A road that I selected to avoid is being used when routing.

My elevation (shown when I display the current position) seems to fluctuate even though my elevation has not changed.

My elevation is missing on the “current position” screen.

Solution

When you set your area to avoid, make sure to select sections of roads that include at least one intersection.


This is normal. The elevation can vary ±100 feet due to GPS calculation errors.

2 GPS P. 222

The elevation is only displayed if the GPS antenna can receive signals from at least four satellites. Try moving the vehicle into an open area. The elevation is also not displayed if the calculated elevation is zero or below sea level.

Update, Coverage, Map Errors

Problem

My city is not part of a fully verified detailed coverage area.

Solution

The mapping database is constantly undergoing revision. You can access the most recent information on the internet.


16 CR-Z NAVI-31SZT8500.book 209 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Smartphone Connection

Problem

Does the navigation system work outside North

America?

Can I play video DVDs in my navigation system?

How do I report errors I find in the database?

Solution

The navigation system contains maps for the 50 U.S. states, Canada, and Puerto

Rico. The navigation system will not work in Mexico or other countries.


No. The navigation system is designed only to read music discs. If you experience any problems that you cannot resolve, please contact your dealer.

Minor errors are bound to occur in a large database. If you encounter major errors, see your dealer.

2 Visiting Your Dealer P. 224

Smartphone Connection

Problem

I cannot connect my smartphone to the system.

Solution

●

●

●

Make sure your smartphone is compatible with the system, and that it is paired and linked to Bluetooth® HandsFreeLink®. To check phone compatibility,

– U.S.: Visit handsfreelink.honda.com

– Canada: Visit www.handsfreelink.ca


The HondaLink app must be installed on your smartphone to connect to the system. For more information:

– U.S.: Visit www.hondalink.com

– Canada: Visit www.honda.ca/hondalink

Check that your smartphone is in good operating condition. Then try the following operations on your smartphone.

– Unlock the security.

– Connect to the system on the HOME screen.

– Close all apps.

– Restart the smartphone.

209

210

16 CR-Z NAVI-31SZT8500.book 210 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Display, Accessories

Display, Accessories

Problem

The display appears dim when starting the car in really cold weather.

Solution

This is normal. The display will become brighter after a few minutes.

Multi-View Rear Camera

Problem

When I shift gears, the multi-view rear camera image display is delayed.

The multi-view rear camera image is too dark or too bright. How do I adjust the brightness?

Solution

This is normal. When shifting into or out of Reverse, you may experience a delay while the screen image switches between the navigation screen and the multiview rear camera image.

While the camera image is displayed, select HOME to increase brightness or

MENU to decrease brightness.

This adjustment does not affect the navigation screen brightness settings.

16 CR-Z NAVI-31SZT8500.book 211 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Troubleshooting u Miscellaneous Questions

Miscellaneous Questions

My clock frequently changes forward and backward by one hour.

Problem

The clock changes even when I am not driving near a time zone boundary.

My state does not observe daylight saving time.

How do I turn this feature off?

Solution

The clock setting is automatically updated based on your GPS location. If you live and work on the boundary between two time zones, you can turn this feature off.


The time zone boundaries are only approximated in the navigation system.

Depending on the geography of the time zone boundary, the switch to a different zone can be erratic.


Select HOME > Settings > Clock/Info > Clock tab, and set Auto Daylight to

Off.


The automatic daylight saving time feature does not work in regions where the daylight saving time system has not been adopted.

Daylight saving time has started, but the navigation system did not change time even though Auto

Daylight is set to ON.

The navigation system automatic daylight feature is not switching the navigation system clock on the correct dates.

The navigation system clock switched by one hour for no apparent reason.

My battery was disconnected or went dead, and the navigation system is asking for a code.

How do I change the interface language?

Select HOME > Settings > Clock/Info > Clock tab, and set Auto Daylight to On.

Note that the automatic daylight feature does not work in regions where the daylight saving time system has not been adopted.


You may be driving near a time zone boundary.


Press and hold the (Audio Power) button for two seconds. The system should reactivate. If you have installed an aftermarket system, see your dealer.

2 System Theft Protection P. 220

Select HOME > Settings > System > Others tab > Language, and set the language to English, Français, or Español.

211

212


Error Messages

Navigation System

Error Message

The system is unable to start due to excessive heat.

The system will start after the system cools.

The route could not be calculated

Solution

The flash memory temperature is too high. The system turns back on automatically when the flash memory cools down. If the error persists, contact your dealer.

The display temperature is too high. The system turns back on automatically when the display cools down.

There is no road for calculating around your vehicle position. Try calculating a route again after moving your vehicle near a street.

There is no road for calculating near the destination or the waypoint. Try another destination or waypoint.

The destination is too far. Try another destination, or add a waypoint on the route.

16 CR-Z NAVI-31SZT8500.book 213 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u Disc Player

Disc Player

Error Message

Bad Disc

Please check Owner's Manual

Please push eject button

Cause

Disc with dust

Condensation on disc

Disc scratched or deformed

Disc placed upside down

Disc not supported

Solution

Clean off the dust on the disc.

Play the disc after a while.

Do not use the scratched or deformed disc.

Insert the disc label side up.

Insert a disc playable with the system.

2 Recommended Discs P. 142

213

214

16 CR-Z NAVI-31SZT8500.book 214 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u Pandora®

U.S. models

Pandora®

Error Message Cause Solution

The connected USB device has a problem.

See Owner’s Manual

The overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected.

An incompatible device is connected. Disconnect the device, and turn the audio system off and on. Do not reconnect the device that caused the error.

The Pandora version is not supported. Update to the latest version.

Pandora App version is not supported

Unable to save bookmark.

The Pandora version is not supported.

The bookmark operation is failed.

Pandora system maintenance.

The Pandora server is in maintenance.

The commanded operation failed. Try again later.

The Pandora server is in maintenance. Try again later.

16 CR-Z NAVI-31SZT8500.book 215 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u Pandora®

Error Message

Unable to connect to

Pandora. When stopped, check your mobile phone.

Cause Solution

The Pandora® app failed to start because of the following device errors:

● The display on your

●

● smartphone is turned off.

Your smartphone is locked.

The home screen or the app screen (music screen) is not

●

● displayed on your smartphone.

The track is not played on your smartphone even after 30 seconds have passed.

The Pandora app is not installed in your device, or the

Pandora version is not supported.

The Pandora app in your smartphone is not compatible with the app launcher system.

●

●

Turn the phone screen on, and make sure it is unlocked.

The Pandora version is not supported. Update to the latest version.

Download the most recent version of the Pandora app.

The required app is not installed.

215

216

16 CR-Z NAVI-31SZT8500.book 216 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u iPod/USB Flash Drive

iPod/USB Flash Drive

Error Message Cause Solution

The connected USB device has a problem.

See Owner’s Manual

The USB connector error occurs.

● Disconnect the iPod or the USB device from the USB connector,

The iPod cannot be and reconnect them.

authenticated.

● Turn the audio system off, and turn it on again pressing the

(Audio Power) Button.

● Set the Power Mode to OFF, and then turn the mode ON or

ACCESSORY.

If the error persists, contact your dealer.

An unsupported format device is connected.

Check a supported format of the USB device.

Update your iPod to the latest version.

The iPod version is not supported.

A connected device is not compatible with the USB connector.

Connect a device compatible with the USB connector.

2 USB Flash Drives P. 154

Unplayable File Check the compatible files.

The music files in the USB flash drive are not compatible.

The format of music files is not appropriate.

Copyright error

Change the format of music files.

WMA and ACC files protected by digital rights management (DRM) cannot be played.

16 CR-Z NAVI-31SZT8500.book 217 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u Bluetooth® HandsFreeLink®


Error Message

Unable to pair with your device.

Please try again.

Unable to add smartphone.

Please check the settings in your smartphone.

Cause

The system failed to connect to the Bluetooth® device.

The settings in your phone are not correct.

Unable to import phonebook.

Please try again later.

Your phone is not compatible with Automatic Phone Sync.

Solution

●

●

Make sure that Bluetooth function is turned ON, on your

Bluetooth-compatible device. For details, check the manual of your Bluetooth-compatible device.

Try pairing your Bluetooth device again.


If the problem is not resolved yet, contact your dealer.

Make sure the settings in your phone are set to allow Bluetooth connection.

Check that your phone is compatible with Automatic Phone Sync.

Visit:

●

●

U.S.: handsfreelink.honda.com

Canada: www.handsfreelink.ca

217

218

16 CR-Z NAVI-31SZT8500.book 218 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Error Messages u Smartphone Connection

Smartphone Connection

Error Message

This Smartphone is not supported.

Smartphone is not compatible

Cause Solution

Your phone is not compatible.

Your phone is not compatible with the system. Visit:

● U.S.: handsfreelink.honda.com

● Canada: www.handsfreelink.ca

Unable to start the app.

When safe, please check your mobile device.

Lost communication with smartphone

Unable to start the app.

When safe, please check your mobile device.

Lost communication with smartphone

Unable to connect to mobile device using Bluetooth.

Please check Settings in the

Audio Unit.

The cable is not connected.

The smartphone is not connected properly.

Appears when the HondaLink app is not installed in your smartphone.

Try connecting your smartphone again. To view connection information:

● U.S.: handsfreelink.honda.com

● Canada: www.handsfreelink.ca

Install the HondaLink app in your smartphone. For more information visit:

● U.S.: www.hondalink.com

● Canada: www.honda.ca/hondalink

Appears when your phone is not paired with the system.

Make sure that Bluetooth® function is turned ON in the system and your phone, and try pairing it again.



Reference Information

System Initialization ..............................220

System Theft Protection ........................220

Acquiring GPS Information....................220

Startup Confirmation Screen .................221

Map Matching ......................................221

System Limitations ................................222

GPS ......................................................222

Address Calculation ..............................222

Database ..............................................222

Customer Assistance .............................224

Resolving Problems ...............................224

Honda Automobile Customer Service

Contact Information............................224

Visiting Your Dealer ..............................224

Map Coverage ..................................... 225

Obtaining a Navigation Update ............ 225

Traffic Information ............................... 226

Operation in Alaska, Hawaii, Canada, and

Puerto Rico............................................. 226

Legal Information ................................. 227

User Agreement ................................... 227

As required by the FCC ........................ 229

219

220


System Initialization

System Theft Protection

The navigation system must be initialized if power to the navigation system is interrupted for any reason (e.g., the battery was disconnected). If this occurs, reactivate the navigation system.

1. Set the power mode to ON, and turn on the audio system.

2. Press and hold the audio system power button for more than two seconds.

Acquiring GPS Information

Depending on the length of time the power was interrupted, your system may require

GPS initialization.

If you are experiencing GPS reception problems:

2 GPS P. 222

The navigation system is reactivated when the navigation system control unit establishes a connection with the vehicle control unit. If the control unit fails to recognize the audio unit, you must go to a dealer and have the navigation system unit checked.

If initialization is not necessary, the system proceeds directly to the Startup

Confirmation screen.

If the system fails to locate a sufficient number of satellites to locate your position within 10 minutes, the following screen is displayed.

16 CR-Z NAVI-31SZT8500.book 221 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu System Initialization u Startup Confirmation Screen

Startup Confirmation

Screen

The Startup Confirmation screen is displayed when initialization has successfully completed. It is displayed every time you start your vehicle. Select OK to continue.

Map Matching

Map matching is the process of using the acquired GPS information to locate your position on the map screen. If you are on a mapped road, the name of the road is displayed along the bottom of the map screen when map matching is completed.

Do not enter a destination until the road name is displayed.

The system may initially show your location on a different street (e.g., in urban areas where streets are close together), may show an incorrect elevation, or may delay the display of the vehicle position icon at intersections. This is normal; the system will correct itself while you drive.

“OK” cannot be selected using a voice command.

221


System Limitations

222

GPS

The signals received from the GPS satellites are extremely weak (less than a millionth of the strength of a local FM station) and require an unobstructed view of the sky.

The GPS antenna is located in the dashboard. The signal reception can easily be interrupted or interfered with by the following:

• Metallic window tint on the front or side windows

• Cell phones, PDAs, or other electronic devices docked in a cradle or lying loose on the dashboard

• Remote starters or “hidden” vehicle tracking systems mounted near the navigation unit

• Audio electronic devices mounted near the navigation unit

• Trees, tall buildings, freeway overpasses, tunnels, or overhead electrical power wires positioning errors of up to several hundred feet.

Address Calculation

The destination icon shows only the approximate location of a destination address. This occurs if the number of possible addresses is different from the number of actual addresses on a block. For example, the address 1425 on a 1400 block with 100 possible addresses (because it is followed by the 1500 block) will be shown a quarter of the way down the block by the system. If there are only 25 actual addresses on the block, the actual location of address

1425 would be at the end of the block.

Database

The digitized map database reflects conditions as they existed at various points in time before production. Accordingly, your database may contain inaccurate or incomplete data or information due to the passage of time, road construction, changing conditions, or other causes.

For example, some places/landmarks may be missing when you search the database because the name was misspelled, the place was improperly categorized, or a place/ landmark is not yet in the database. This is also true for police stations, hospitals, and other public institutions. Do not rely on the navigation system if you need law enforcement or hospital services. Always check with local information sources.

GPS is operated by the U.S. Department of

Defense. For security reasons, there are certain inaccuracies built into GPS for which the navigation system must constantly compensate. This can cause occasional


In addition, the map database contains verified and unverified areas. Unverified streets may be missing from the map, in the wrong location, or have an incorrect name or address range. A message will warn you if your route includes unverified streets.

Exercise additional caution when driving in unverified areas.

Every effort has been made to verify that the database is accurate. The number of inaccuracies you experience increases the longer you go without obtaining an updated map database.


We assume no liability for any incident that may result from an error in the program, or from changed conditions not noted above.

The database does not include, analyze, process, consider, or reflect any of the following categories of information:

• Neighborhood quality or safety

• Population density

• Availability or proximity of law enforcement

• Emergency, rescue, medical, or other assistance

• Construction work, zones, or hazards

• Road and lane closures

• Legal restrictions (such as vehicular type, weight, load, height, and speed restrictions)

• Road slope or grade

• Bridge height, width, weight, or other limits

• Traffic facilities safety

• Special events

• Pavement characteristics or conditions uu System Limitations u Database

223

224


Customer Assistance

Resolving Problems

If you run into a specific issue that you cannot resolve, consult the following help resources:

• For navigation system issues:

2 Troubleshooting P. 204

There are also FAQs available online at

automobiles.honda.com.

• For questions regarding Bluetooth®

HandsFreeLink®:


• For questions regarding the smartphone connection:

– U.S.: Visit handsfreelink.honda.com.

– Canada: Visit www.handsfreelink.ca.

• For traffic-related issues:

2 Traffic P. 206

• For reporting issues with the database or places/landmarks:

2 Visiting Your Dealer P. 224

• Call Honda Automobile Customer

Service.

2 Honda Automobile Customer Service

Contact Information P. 224

Honda Automobile

Customer Service Contact

Information

Honda Navi

American Honda Motor Co., Inc.

Honda Automobile Customer Service

Mail Stop 500-2N-7A

1919 Torrance Blvd.

Torrance, CA 90501-2746

Tel: (800) 999-1009

Fax: (310) 783-3023

Honda Canada Inc.

Honda Customer Relations

180 Honda Blvd.

Markham, ON

L6C 0H9

Tel: (888)-9-HONDA-9

Hours: 8:00 am to 7:30 pm Mon to Fri (EST)

Visiting Your Dealer

If you have a question that you cannot resolve using the available help resources, you can consult your dealer. Please identify the specific issue (e.g., error occurs when you enter a specific address, when driving on a certain road, or just when it’s cold) so that the service advisor can refer the issue to the factory so that a solution can be found.

Be patient, the service advisor may be unfamiliar with your specific issue.

16 CR-Z NAVI-31SZT8500.book 225 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Customer Assistance u Map Coverage

Map Coverage

The navigation system provides map coverage for the contiguous United States,

Alaska, Hawaii, Canada, and Puerto Rico.

The map coverage consists of accurately mapped (verified) metropolitan areas and a less accurate (unverified) rural database.

Note that unverified areas are constantly being reviewed and converted to verified areas each year.

Contiguous United States

Hawaii

Alaska Canada

Puerto Rico

Map coverage update information is available from Honda Automobile

Customer Service or online at:

• U.S.: www.hondanavi.com

• Canada: www.honda.ca

To find navigation system update information:

1. Visit the website:



2. Select your vehicle model and model year.

3. Click Map Coverage to display a list of verified coverage areas on the most recent update.

4. Click Map Coverage Details to display a

PDF document with a full listing of all coverage areas.

u Adobe® Reader® is required for viewing and printing the Portable

Document Format (PDF) documents.

To download the latest version of

Adobe Reader, visit http:// get.adobe.com/reader/.

Obtaining a Navigation

Update

Honda is continually expanding the scope of the navigation system. Navigation system software upgrades may be made available periodically, usually in the fall of each year.

To purchase an updated data file:

1. Obtain your vehicle’s VIN number and the

System/Device Information.

2 System/Device Information P. 198

2. Call the Honda Navigation Disc Fulfilment

Center at (888) 291-4675, or order online at:



Updated data is not available from your dealer. However, the dealer may assist you in obtaining one out of courtesy. There is no program for free updates.

225

16 CR-Z NAVI-31SZT8500.book 226 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Customer Assistance u Traffic Information

226

Traffic Information

• Continuously updated traffic information is available in certain areas across the lower 48 U.S. states, Hawaii, and some cities in Canada.

• Visit automobiles.honda.com/traffic for a complete listing of coverage areas and other information.

Operation in Alaska,

Hawaii, Canada, and

Puerto Rico

■

Map Coverage

All roads displayed on the map screens are verified roads. Information in this manual relating to “unverified” roads or areas is not applicable.

■

Address and Place Entry

Screens

Entering a destination address or place/ landmark on another island may result in a screen caution message. This is because there are no ferry routes between islands in the database.


Legal Information

User Agreement

■

END-USER TERMS

The data (“Data”) is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and NAVTEQ North America,

LLC (“NT”) and its licensors (including their licensors and suppliers) on the other hand.

© 2012 NAVTEQ. All rights reserved.

This data includes information taken with permission from Canadian authorities, including © Her Majesty the Queen in Right of Canada, © Queen's Printer for Ontario, ©

Canada Post Corporation, GeoBase®, ©

The Department of Natural Resources

Canada. All rights reserved.

■

TERMS AND CONDITIONS

Personal Use Only. You agree to use this

Data for the solely personal, noncommercial purposes for which you were licensed, and not for service bureau, timesharing or other similar purposes.

Accordingly, but subject to the restrictions set forth in the following paragraphs, you may copy this Data only as necessary for your personal use to (i) view it, and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. Multi-disc sets may only be transferred or sold as a complete set as provided by NT and not as a subset thereof.

NAVTEQ holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information.

©United States Postal Service® 2009. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal

Service, USPS, and ZIP+4.

Restrictions. Except where you have been specifically licensed to do so by NT, and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.

Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results.

No Warranty. This Data is provided to you

“as is,” and you agree to use it at your own risk. NT and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the

Continued 227

16 CR-Z NAVI-31SZT8500.book 228 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Legal Information u User Agreement

228

Data or server will be uninterrupted or error-free.

Disclaimer of Warranty: NT AND ITS

LICENSORS (INCLUDING THEIR LICENSORS

AND SUPPLIERS) DISCLAIM ANY

WARRANTIES, EXPRESS OR IMPLIED, OF

QUALITY, PERFORMANCE,

MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE OR NON-

INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.

Disclaimer of Liability: NT AND ITS

LICENSORS (INCLUDING THEIR LICENSORS

AND SUPPLIERS) SHALL NOT BE LIABLE TO

YOU: IN RESPECT OF ANY CLAIM, DEMAND

OR ACTION, IRRESPECTIVE OF THE NATURE

OF THE CAUSE OF THE CLAIM, DEMAND

OR ACTION ALLEGING ANY LOSS, INJURY

OR DAMAGES, DIRECT OR INDIRECT,

WHICH MAY RESULT FROM THE USE OR

POSSESSION OF THE INFORMATION; OR

FOR ANY LOSS OF PROFIT, REVENUE,

CONTRACTS OR SAVINGS, OR ANY OTHER

DIRECT, INDIRECT, INCIDENTAL, SPECIAL

OR CONSEQUENTIAL DAMAGES ARISING

OUT OF YOUR USE OF OR INABILITY TO USE

THIS INFORMATION, ANY DEFECT IN THE

INFORMATION, OR THE BREACH OF THESE

TERMS OR CONDITIONS, WHETHER IN AN

ACTION IN CONTRACT OR TORT OR BASED

ON A WARRANTY, EVEN IF NT OR ITS

LICENSORS HAVE BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. Some

States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.

Export Control. You agree not to export from anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations.

Entire Agreement. These terms and conditions constitute the entire agreement between NT (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.

Governing Law. The above terms and conditions shall be governed by the laws of the State of Illinois, without giving effect to

(i) its conflict of laws provisions, or (ii) the

United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.

Government End Users. If the Data is being acquired by or on behalf of the United

States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a “commercial item” as that term is defined at 48 C.F.R.

(“FAR”) 2.101, is licensed in accordance with this End User License Agreement, and each copy of the Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use,” and shall be treated in accordance with such Notice:


■

NOTICE OF USE

Contractor (Manufacturer/ Supplier) Name:

NAVTEQ

CONTRACTOR (MANUFACTURER/

SUPPLIER) ADDRESS: 425 West Randolph

St., Chicago, Illinois 60606

This Data is a commercial item as defined in

FAR 2.101 and is subject to the End User

License Agreement under which this Data was provided.

© 2012 NAVTEQ – All rights reserved.

If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify NAVTEQ prior to seeking additional or alternative rights in the Data.

As required by the FCC

1. This device complies with Part 15 of the

FCC Rules and Canadian RSS-210/

RSSGen. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

2. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.

3. This product emits radio frequency energy, but the radiated output power of this device is far below the FCC and IC radio frequency exposure limits. This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized.

uu Legal Information u As required by the FCC

229

230



Voice Commands

Voice Commands .................................. 232

Global Commands ............................... 232

Voice Portal Commands ....................... 232

Navigation Commands ......................... 232

Information commands ........................ 234

Climate Control Commands ................. 235

Audio Commands ................................ 235

Cellular Phone Commands ................... 238

On-Screen Commands ......................... 238

Spelling Assistance ............................... 238

List of Categories .................................. 242

231


Voice Commands

232

Global Commands

The system accepts these commands on any screen.

Voice Help *

Display navigation (equivalent to Navi)

Display map

Display menu (equivalent to MENU)

Display information (equivalent to Info)

Display phone screen (equivalent to

Phone)

Display audio screen (equivalent to

Audio)

Display clock

Display wallpaper

Display Voice Portal

Display home (equivalent to HOME)

Display setting (equivalent to Settings)

Trip computer

Back (equivalent to BACK)

What is today’s date?

What time is it?

* This command displays available commands for current screen.

Voice Portal Commands

The system accepts these commands on the

Voice Portal screen.

Phone Call

Music Search

Voice Help

Address

Place Name *

More Destination Methods

* This command is available only when you select English for the system language on U.S. models. In other case,

Find Nearest POI Category is displayed.

Navigation Commands

The system accepts these commands on a map/guidance screen.

■

Map Display Commands

Display current location (shows current latitude, longitude, and elevation)

Display/Hide (specify icon type):

ATM gas station restaurant post office grocery store

lodging (hotel, motel) parking garage parking lot school hospital freeway exit information highway exit information traffic * traffic speeds * traffic icons *

Go home 1

Go home 2

Register the current location (stores current location in the Address Book)

* These commands are only available in certain areas.


■

Map Scale Commands

Display north up

Display heading up

Display 3D map

Display zoom in

Display zoom out

Display (specify scale):

1/20 mile (80 m) scale




1 mile (1600 m) scale

2 mile (3 km) scale







Max zoom in

Max zoom out

■

Find Place Commands

Find nearest (specify place):

Fuel and auto

ACURA dealers

HONDA dealers

Gas station

Hydrogen station

Auto parts & electronics

Auto repair & maintenance

Car wash & detailing

Motorcycle dealers

Other car dealers

Roadside assistance

ATM and bank

ATM

Bank

Check cashing

Community

Business

City hall

Civic center

Convention center

Court house

Higher education

Library

Post office

School uu Voice Commands u Navigation Commands

Emergency room

Hospital

Police station

Veterinarian

Lodging

Bed & breakfast

Hotel

Recreation

Amusement park

Golf course

Historical monument

Marina

Movie theater

Museum

Park

Performing arts

Sports complex

Tourist attraction

Restaurant

American restaurant

Californian restaurant

Chinese restaurant

Coffee shop

Continental restaurant

Fast food

French restaurant

German restaurant

Greek restaurant

Continued 233

234

16 CR-Z NAVI-31SZT8500.book 234 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Information commands

Indian restaurant

Italian restaurant

Japanese restaurant

Korean restaurant

Mexican restaurant

Pizza

Seafood restaurant

Thai restaurant

Vegetarian restaurant

Vietnamese restaurant

Other restaurant

Shopping area

Accessory store

Book store (Music, Video)

Clothing store

Grocery store

Home improvement store

Mall

Office supply store

Pharmacy

Pet food store

Sewing store

Shoe store

Sporting goods store

Toy store

Travel center

Airport

Automobile club

Bus station

Camping

Commuter rail station

Ferry terminal

Named place

Park & ride

Parking garage

Parking lot

Rental car agency

Rest area

Ski area

Tourist information

Train station

Travel agency

Truck stop

■

Route Commands

The system accepts these commands when a route is set.

How long to the destination?

How far to the destination?

Display destination map

Display entire route

Cancel route

Repeat guidance

Route menu

Information commands

The system accepts these commands on most screens.

Display Traffic List *

Display traffic on my Route * (when en route)

Trip computer

Display clock

Display wallpaper

* These commands are only available in certain areas.

16 CR-Z NAVI-31SZT8500.book 235 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Climate Control Commands

Climate Control Commands


Climate control voice commands are only available on some Canadian models.

Climate control automatic (maintains selected temperature)

Climate control full off

Climate control on *

Climate control off *

Air conditioner on *

Air conditioner off *

Rear defrost on *

Rear defrost off *

Climate control fresh air

Climate control recirculate

Climate control vent

Climate control bi-level (vent and floor)

Climate control floor

Climate control floor and defrost

Fan speed up

Fan speed down

Fan speed # (#: 1 to 7)

Temperature # degrees (#: 57 to 87 °F/15 to 29 °C)

Temperature up

Temperature down

Driver Temperature up

Driver Temperature down

Temperature max hot

Temperature max cold

* These commands toggle the function on and off, so the command may not match your intended action.

Audio Commands


■

Radio Commands

Audio on *

Audio off *

Radio on *

Radio off *

Radio select FM

Radio select AM

Radio tune to # FM (#: frequency, e.g.,

95.5)

Radio tune to # AM (#: frequency, e.g.,

1020)

Radio seek up

Radio seek down

Radio next station

Radio preset # (#: 1 to 12)

Radio FM preset # (#: 1 to 12)

Radio AM preset # (#: 1 to 6)

Radio scan *


Audio volume levels cannot be controlled using voice control.

Continued 235

236

16 CR-Z NAVI-31SZT8500.book 236 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Audio Commands

■

Disc Commands

Disc play

Disc play track # (#: 1 to 30)

Disc skip forward

Disc skip back

Disc track random *

Disc track repeat *

Disc track scan *

Disc folder up

Disc folder down

Disc folder random *

Disc folder repeat *

Disc folder scan *

Disc normal play (cancels random, repeat, or scan play mode, resumes normal play mode)


■

USB Commands

USB play

USB play track # (#: 1 to 30)

USB skip forward

USB skip back

USB track random *

USB track repeat *

USB track scan *

USB folder up

USB folder down

USB folder random *

USB folder repeat *

USB folder scan *

USB normal play (cancels random, repeat, or scan play mode, resumes normal play mode)


■

iPod Commands

iPod play

iPod play track # (#: 1 to 30) iPod skip forward iPod skip back iPod track shuffle * iPod album shuffle * iPod track repeat *

iPod normal play (cancels repeat or shuffle play mode, resumes normal play mode)

What am I listening to?

Who am I listening to?

Who is this?

Who's playing?

What’s playing?

What album is this?


16 CR-Z NAVI-31SZT8500.book 237 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Audio Commands

U.S. models

■

Pandora® Commands

Pandora (Station name)

Pandora play

Pandora like this song

Pandora dislike this song

Pandora skip forward

Pandora station up

Pandora station down

Pandora pause *

Pandora resume *


■

Bluetooth® Audio Commands

Bluetooth audio play

Bluetooth audio skip forward

Bluetooth audio skip back

Bluetooth audio group up *

Bluetooth audio group down *

Bluetooth audio pause

Bluetooth audio resume

* These commands are not available depending on the paired Bluetooth audio devices.

Bluetooth Audio commands may not work on some phones or Bluetooth audio devices.

■

AUX Commands

Auxiliary play (for HDMI TM video)

■

Song By Voice

TM

commands

What am I listening to?

Who am I listening to?

Who is this?

Who’s playing?

What’s playing?

What album is this?

Play artist (name)

Play track/song (name)

Play album (name)

Play genre/category (name)

Play playlist (name)

Play composer (name)

List artist (name)

List album (name)

List genre/category (name)

List playlist (name)

List composer (name)

237

238

16 CR-Z NAVI-31SZT8500.book 238 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Cellular Phone Commands

Cellular Phone Commands

The system accepts these commands on any screen.

Dial (Call) by number

Dial (Call) by name

Call (phone number or contact name)

Contacts that are imported from your phone to the vehicle are all made available by voice. Voice tags can also be recorded for each of your speed dial entries.

On-Screen Commands

The system accepts these commands on any screen. There are over 100 on-screen commands. Say what is written on the screen to activate that selection. For lists, you can say the list item number to select that item. The following commands are some examples among many.

Next/Previous *1

Right/Left *2

Up/Down *1

Return

OK (excluding Startup Confirmation screen)

Delete

Keypad *2

Qwerty *2

Alphabet keyboard *2

ABC *2

A acute A grave A circumflex *2

Number Symbol *2

*1: While driving, you can scroll down the list up to three pages.

*2: These commands can be accepted from a keyboard screen to enter letters.

Spelling Assistance

The voice control system can also recognize phonetic alphabet input for numbers, letters, accented letters, punctuation marks, and symbols.

When selecting letters using the voice control system, a confirmation box may pop up to confirm the entry.


■

Numbers

3

4

5

1

2

6

7

8

9

0

Number

One

Two

Three

Four

Five

Six

Seven

Eight

Nine

Zero

Say …

■

Letters

K

L

M

J

I

H

C

D

E

A

B

F

G

Say … Or say…

Alpha/Apple

Bravo/Boy

Charlie

Delta/Dog

Echo/Edward

Foxtrot/Frank

Golf/George

Hotel/Henry

India/Igloo

Juliet/John

Kilo/King

Lima/Larry

Mike/Mary uu Voice Commands u Spelling Assistance

X

Y

Z

U

V

W

P

Q

R

N

O

S

T


November/Nancy

Oscar

Papa/Paul

Quebec/Queen

Romeo/Robert

Sierra/Sam

Tango/Tom

Uniform/Uncle

Victor

Whiskey/William

X-ray

Yankee/Yellow

Zulu/Zebra

Continued 239

16 CR-Z NAVI-31SZT8500.book 240 ページ２０１５年７月３０日　木曜日　午前９時１８分 uu Voice Commands u Spelling Assistance

■

Accented Letters

Ú

Û

Ü

Ö

Ù

Ï

Ó

Ô

Õ


I umlaut

O acute

O circumflex

O Tilde

O umlaut

U grave

U acute

U circumflex

U umlaut

240

Í

Ì

Î

É

Ê

Ë

Â

Ã

Ä

À

Á

Ç

È


A grave

A acute

A circumflex

A Tilde

A umlaut

C cedilla

E grave

E acute

E circumflex

E umlaut

I grave

I acute

I circumflex

■

Symbols

+

¿

¡

;

:

?

*

_

`

.

,

@

^

Symbol Or say…

At sign

Caret

Asterisk

Underscore

Back quote

Comma

Dot

Question mark

Colon

Semicolon

Plus

Inverted Question Mark

Inverted Exclamation Point


(

)

~

/

<

}

{

>

‘

&

$

%

-

!

“

#

«

Symbol

»

Or say…

Left-Pointing Double

Angle Quotation Mark

Right-Pointing Double

Angle Quotation Mark

Hyphen

Exclamation point

Double quote

Pound

Dollar

Percent

Ampersand

Apostrophe

Open parenthesis

Close parenthesis

Tilde

Slash

Less than

Greater than

Open brace

Close brace uu Voice Commands u Spelling Assistance

241

242


List of Categories

All Types (Fuel/Auto)

Acura Dealers

Honda Dealers

Gas Station

Fuel/Auto Lodging

Auto Repair & Maintenance All Types (Lodging)

Car Wash & Detailing

Motorcycle Dealers

Other Car Dealers

Bed & Breakfast

Hotel/Motel

Recreation

All Types (Recreation) Museum

Shopping

All Types (Shopping) Office Supplies/Electronics

Accessories/Jewelry Pharmacy/Drug Store

Auto Parts & Electronics Pet Food/Supplies

Books/Music/Video Sewing/Linen

Hydrogen Station

Auto Parts & Electronics

All Types (ATM/Bank)

ATM

Roadside Assistance

ATM/Bank

Bank

Amusement Park

Golf Course

Park/Recreation Area Clothing

Performing Arts Groceries

Historical Monument Sports Complex

Marina Tourist Attraction

Check Cashing/Money Trans Movie Theater

Community Restaurant

Home Improvement

Mall/Department Store

All Types (Travel)

Shoes/Bags

Sporting Goods

Toys/Arts/Crafts

Travel

Parking Garage/House

All Types (Community)

Business

City Hall

Civic/Community Center

Court House

Higher Education

Library

Post Office

Convention/Exhibition Cent School

Emergency

All Types (Emergency) Police Station

Honda Roadside Assistance Roadside Assistance

Hospital Veterinarian

All Types (Restaurant) Indian

American Italian

Café/Coffee Shop

Californian

Chinese

Continental

Japanese

Korean

Mexican

Pizza

Fast Food

French

German

Greek

Seafood

Thai

Vegetarian

Vietnamese

Other

Airport

Automobile Club

Bed & Breakfast

Bus Station

Parking Lot

Rental Car Agency

Resort

Rest Area

Camping Ski Area

Commuter Rail Station Tourist Attraction

Ferry Terminal

Hotel/Motel

Named Place

Park & Ride

Tourist Information

Train Station

Travel Agency

Truck Stop/Plaza


Index

Index

Symbols

9 (Audio Power) Button............................ 4

bn (Channel) Button ....................... 5, 131

E (CLOSE) Button ....................................... 4 a (Display Mode) Button ................. 4, 27

E (Eject) Button.......................................... 4

J (Hang-Up/Back) Button ............... 5, 24 h (Pick-Up) Button............................. 5, 185 d (Talk) Button .................................... 5, 24

NB (Volume) Button........................ 5, 131

Numbers

3D Angle Adjustment ................................ 57

3D Map ....................................................... 56

A

Address

Editing Address Book ................................ 32

Editing Avoid Area .................................... 47

Setting Destination ................................... 84

Address Book


Saving to Address Book .......................... 100


Address Book PIN....................................... 36

Adjust Time ................................................ 77

Answer...................................................... 185

ATM/Bank (Place Category)....................... 93

Audio..................................................... 8, 127

Basic Operation ......................................... 10

Remote Control ....................................... 130

Settings ................................................... 132

Voice Commands List .............................. 235

Audio Menu

Bluetooth® Audio .................................... 161

Disc ......................................................... 141

FM/AM Radio .......................................... 136

iPod......................................................... 146

Pandora® ................................................. 153

USB Flash Drive........................................ 157

Audio Source Pop-Up ............................... 132

Auto Daylight ............................................. 72

Auto Time Zone .......................................... 72

Automatic Phone Sync ............................. 174

Avoid Streets............................................. 121

Avoided Area .............................................. 46

B

BACK button ................................................. 4

Background Color....................................... 68

Beep Volume .............................................. 69

Black Level .................................................. 67

Bluetooth (Settings).................................. 170

Bluetooth On/Off Status .......................... 170

Bluetooth Device List

Audio ...................................................... 132

Phone...................................................... 172

Bluetooth® Audio

Playing .................................................... 158


Bluetooth® HandsFreeLink®..................... 165

Bluetooth Setting .................................... 170

Making a Call.......................................... 181

Pairing a Phone ....................................... 168

Phone Setting.......................................... 180

Receiving a Call ....................................... 185

Setting Speed Dials.................................. 175

Brightness ................................................... 67

C

Call History................................................ 184

Cancel Route............................................. 120

Category


Place Category List .................................. 242

Category History......................................... 39

Change Bluetooth Audio Device ............. 132

Change Route Preference........................ 113

Change State .............................................. 85

City .............................................................. 86

City Vicinity................................................. 94

Clear Current Route ................................. 122

Clock Adjustment ....................................... 72

Adjust Time............................................... 77

Auto Daylight............................................ 72

Auto Time Zone ........................................ 72

Clock Display............................................. 72

Clock Format............................................. 72

Clock Location .......................................... 73

Resetting................................................... 77

Clock Reset.................................................. 73

243


244

Clock/Wallpaper Type

Clock......................................................... 73

Wallpaper.................................................. 74

Color (Day) .................................................. 55

Color (Night) ............................................... 55

Community (Place Category) ..................... 93

Connect Phone.......................................... 169

Continue Trip To....................................... 125

Contrast....................................................... 67

Coordinate .................................................. 97

Correct Vehicle Position ............................. 64

Current Location......................................... 58

Current Position

Editing Address Book................................. 32

Setting Destination .................................... 98

Customize.................................................... 53

D

Delete This Device .................................... 173

Destination List

Adding Waypoint .................................... 115

Editing..................................................... 118

Detour ....................................................... 120

Dial ............................................................ 183

Directions .................................................. 109

Disc

Playing..................................................... 138


Display Mode .............................................. 27

Display Settings........................................... 67

E

Edit Device Name ..................................... 172

Edit Go Home 1 .......................................... 35

Edit Go Home 2 .......................................... 35

Edit Home Entry ....................................... 100

Edit Pairing Code...................................... 171

Edit POI Search Radius Along Route ......... 45

Edit Speed Dial ......................................... 175

Edit/Delete Entry .............................. 100, 125

Emergency (Place Category) ...................... 93

Enhanced Voice Guidance ......................... 48

Error Messages

Bluetooth® HandsFreeLink® ..................... 217

Disc Player............................................... 213

iPod/USB Flash Drive................................ 216

Navigation System................................... 212

Pandora®................................................. 214

Smartphone Connection ......................... 218

Exit Info..................................................... 110

F

Factory Data Reset ..................................... 80

FM/AM Radio

Playing .................................................... 134


Folder

Disc......................................................... 139

USB Flash Drive ....................................... 156

Folder List

Disc......................................................... 140

Fuel/Auto (Place Category) ........................ 93

G

Go Home 1 ................................................. 13

Go Home 1 PIN........................................... 36

Go Home 2 ................................................. 13

Go Home 2 PIN........................................... 36

Group

Bluetooth® Audio ................................... 160

Guidance .................................................... 48

Guidance Mode.......................................... 49

H

Hang Up ................................................... 185

HD Radio Mode........................................ 132

Heading-Up ................................................ 56

HOME ........................................................... 8

HOME button ............................................... 4

HOME Screen ............................................... 8

Honda Customer Service ......................... 224

HondaLink Assist ...................................... 193

I

Info ............................................................... 8

Info Menu................................................. 197

Info Screen Preference ............................ 197

Intersection ................................................ 96

iPod

Connecting, Disconnecting ..................... 143

Playing .................................................... 143

Voice Commands List.............................. 236


K

Keyboard Layout........................................ 78

L

Language.................................................... 79

Lodging (Place Category) .......................... 93

M

Map............................................................. 51

Map Input

Editing Avoid Area .................................... 47


Map Legend ......................................... 11, 59

Map Menu................................................ 107

Map Screen............................................... 102

Icon .............................................. 11, 53, 61

Orientation ............................................... 56

Scale......................................................... 60

Map Update

Checking Version.................................... 199

Obtaining Update Data ........................... 225

Viewing Update Status............................ 199

Map/Guidance.......................................... 108

MENU........................................................ 113

MENU button ............................................... 4

MODE Button....................................... 5, 130

Music Search

iPod ........................................................ 147

Mute ......................................................... 185

N

Navi ............................................................... 8

Navigation menu

Destination ................................................ 82

Route Option........................................... 113

North-Up ..................................................... 56

O

Off-road Tracking

Driving .................................................... 105

Setting ...................................................... 63

Others (Settings) ......................................... 78

Place Name


Setting Destination.................................... 90

Place Phone Number




Deleting .................................................... 38



P

Pair Phone ................................................. 168

Pandora®

Playing .................................................... 151


Personal Info ............................................... 29

Phone ............................................................ 8


Phone (Settings) ....................................... 180

Phonebook................................................ 182

Phonebook Phonetic Modification

Adding .................................................... 178

Editing..................................................... 179

PIN Number................................................. 36

Place Category

Editing Address Book................................. 32

Setting Destination .................................... 93

R

Radio

FM/AM.................................................... 134

Radio Data System ................................... 137

Random/Repeat

Disc......................................................... 141

USB Flash Drive ....................................... 157

RDS INFO................................................... 132

Rear Camera (Settings) ............................ 201

Recalculation ............................................ 105

Recreation (Place Category) ...................... 93

Remember Last Screen............................... 78

Restaurant (Place Category) ...................... 93

Ring Tone.................................................. 180

Route Option............................................ 113

Route Preference........................................ 41

Routing ....................................................... 40

245


246

S

Scan

Disc ......................................................... 141

FM/AM Radio .......................................... 136

USB Flash Drive........................................ 157

Search by Name .......................................... 94

Search Nearby ................................... 100, 122

Seek

FM/AM Radio .......................................... 135

Settings.......................................................... 8

Shopping (Place Category)......................... 93

Shuffle/Repeat

iPod......................................................... 146

Siri Eyes Free ............................................... 26

Song

iPod......................................................... 145

Song by Voice

Searching Music ...................................... 148

Setting....................................................... 71

Song By Voice Phonetic Modification ..... 149

Sort by Distance to Travel .......................... 94

Sound ........................................................ 133

Sound/Beep ................................................. 69

SOURCE ....................................................... 10

Speed Dial

Making a Call .......................................... 184

Registering .............................................. 175

Straight Line Guide..................................... 57

Street ........................................................... 87

System Settings ........................................... 65

System/Device Information ...................... 198

T

TAG ........................................................... 135

Text/Email ................................................. 190

Setting .................................................... 192

Touch Tones.............................................. 185

Track

Bluetooth® Audio.................................... 160

Disc......................................................... 139

USB Flash Drive ....................................... 156

Traffic Incidents........................................ 112

Traffic Rerouting ........................................ 44

Driving .................................................... 111

Setting ...................................................... 44

Transfer..................................................... 185

Travel (Place Category) .............................. 93

Trip Computer .......................................... 196

Tune

FM/AM Radio .......................................... 135

U

Unit (mile or km) ........................................ 78

Unverified Routing..................................... 42

Update System Software

Finding Update Information..................... 225

Obtaining Update Data ........................... 225

USB Flash Drive

Connecting, Disconnecting...................... 154

Playing .................................................... 154


User Name .................................................. 37

V

Verbal Reminder ........................................ 69

View ............................................................ 56

View Area ................................................... 46

View Routes ............................................. 101

Voice

Map Menu.............................................. 106

Voice Command Tips ................................. 78

Voice Commands

Basic Operation........................................... 9

Help.......................................................... 16


Voice Control System ................................ 24

Voice Control Operation

Basic Operation........................................... 6

Siri Eyes Free ............................................. 26

Voice Portal .................................................. 6


Voice Prompt.............................................. 71

Voice Recog................................................ 71

Voice Tag

Editing .................................................... 177

Registering.............................................. 176

VOL (Volume) button .................................. 4

Volume

Guidance .................................................. 70


W

Wallpaper................................................... 74

Waypoint

Adding ................................................... 114

Deleting, Ordering .................................. 118

247


Honda CR-Z 2016 Owner Manual 249 Pages

Honda CR-Z 2016 Owner Manual

WARNING

Using the navigation system while driving can take your attention away from the road, causing a crash in which you could be seriously injured or killed.

Only operate system controls when the conditions permit you to safely do so.

Contents

Quick Reference Guide

Overview—Functions at a Glance

Navigation

Store home addresses

Store contacts

Enter destination

Select route

Track route

Avoid certain areas

Add waypoints

Audio

AM/FM Radio

Compact Disc

iPod

Pandora®

USB Flash Drive

Bluetooth®

Audio

Voice Control

Bluetooth® HandsFreeLink®

Text Messages

Other Features

System Controls

(Audio Power) Button

HOME Button

VOL (Volume) Button

MENU Button

BACK Button

Disc Slot

Microphone

(Eject) Button

(Display Mode) Button

(CLOSE) Button

MODE Button

(Volume) Button

(Channel) Button

(Pick-Up) Button

(Talk) Button

(Hang-Up/Back) Button

Voice Control Operation

Voice Portal Screen

On the Menu Screen

Touchscreen Operation

Tap

Slide

Flick

Pinch In/Out

HOME Screen

How to Enter Information

Using Voice Control

Using the Touchscreen

On list screens:

On list screens:

Audio System

Basic Operation

Audio Control Display

How to access the disc slot

Map Screen Legend

During Route Guidance

Map Screen

Guidance Screen

Map Screen during Scrolling

Navigation—Home Addresses and Going Home

Storing Your Home Address

Going Home

Navigation—Entering a Destination

Navigation—Changing Route or Destination

Adding a Waypoint (“Pit Stop”)

Changing Your Destination

Canceling Your Route

From the map screen:

Voice Help

Command Help

Getting Started Tutorial