Instruction / Installation Manual

Instruction / Installation Manual
Instruction / Installation Manual
90cm Stainless Steel Chimney Hood
L90CHDSS11
90cm Black Chimney Hood
L90CHDB11
L90CHDB_SS11_IB_110728_Annie.indd 1
11年7月28日 下午4:15
L90CHDB_SS11_IB_110728_Annie.indd 2
11年7月28日 下午4:15
Contents
Unpacking...................................................................................................................................... 4
Product Overview.......................................................................................................................... 5
Modes of Operation...................................................................................................................... 6
Air Extraction...............................................................................................................................................................6
Air Recirculation.........................................................................................................................................................6
Operation....................................................................................................................................... 6
To Select the Fan Motor Speed.............................................................................................................................6
Hob Lighting...............................................................................................................................................................6
Cleaning and Maintenance........................................................................................................... 7
Grease Filters...............................................................................................................................................................7
Cleaning the Grease Filters by Hand..................................................................................................................8
Cleaning the Grease Filters in the Dishwasher...............................................................................................8
Carbon Filter Usage..................................................................................................................................................9
Replacing Carbon Filters.........................................................................................................................................9
Changing the Lamps................................................................................................................................................9
Hints and Tips.............................................................................................................................. 10
If Cooker Hood Does Not Operate................................................................................................................... 10
Technical Specification................................................................................................................ 11
Installation................................................................................................................................... 12
Product Overview................................................................................................................................................... 12
Safety Distance Between Hob and Cooker Hood....................................................................................... 14
Connection for Air Extraction............................................................................................................................ 15
Mounting the Cooker Hood............................................................................................................................... 16
Safety Warnings........................................................................................................................... 18
L90CHDB_SS11_IB_110728_Annie.indd 3
11年7月28日 下午4:15
Thank you on the purchase of your new Logik Cooker Hood.
We recommend that you spend some time to read this manual in order to fully understand
how to install and operate it correctly.
Read all the safety warnings carefully before use and keep this manual for future reference.
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local
regulations. The following items are included:
Hanging Plate
(for mounting product on the wall)
PN: HP-U-01
Main Unit
External Chimney Connection Plate
(for fixing external chimney on the wall)
PN: HP-EC-01
Internal Chimney X 1
PN: LIC90CHB (for L90CHDB11)
LIC90CHSS (for L90CHDSS11)
4 x 8mm Screws X 4
PN: S4/8
External Chimney X 1
Ф7.5 x 37mm
PN: LEC90CHB (for L90CHDB11)
Plastic Wall Plug X 9
LEC90CHSS (for L90CHDSS11)
PN: PWP75/37
Internal Chimney Connection Plate
(for fixing internal chimney on the wall)
PN: HP-IC-01
Adapter X 1
(for reducing outlet diameter from 150-120mm)
PN: AD
5-Ø8
3503C1
4 x 30mm Screws X 2
PN: S4/30
4 x 40mm Screws X 7
PN: S4/40
Drill Template
PN: DNT-L90CHDB11
Instruction Manual
PN: L90CHDB_SS11-001
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
4
L90CHDB_SS11_IB_110728_Annie.indd 4
11年7月28日 下午4:15
Product Overview
1
2
3
4
5
6
1.
Recirculation Vents
4.
Control Panel
2.
Internal Chimney
5.
Illumination
3.
External Chimney
6.
Aluminium Filter
Control Panel
1
2
1.
OFF button
2.
Motor speed buttons
3.
Lamp button
3
5
L90CHDB_SS11_IB_110728_Annie.indd 5
11年7月28日 下午4:15
Modes of Operation
The cooker hood works with
Air Extraction
The air is drawn in and cleaned by the grease filters and directed outside.
When the cooker hood is switched on, the non-return flap opens for the cooking
vapours to be ducted away.
There must be adequate ventilation of the room when the cooker hood is used at the same time as
appliances burning gas or other fuels.
Air Recirculation
The air is drawn in and cleaned first by the grease filters and then by a carbon filters. The
cleaned air is then recirculated back into the kitchen through the recirculation vents in
the top of the cooker hood chimney.
• Carbon filters are available as an optional extra, see rear page for ordering details.
• Before using the cooker hood in recirculation mode, ensure that the carbon filters are in place.
See “Cleaning and Maintenance”
Operation
To Select the Fan Motor Speed
1.
The unit has 3 motor speeds “1” , “2” and “3”.
2.
For short periods of cooking food with intensive vapours and a strong aroma, e.g. when searing meat, you
may wish to select the highest setting “3”.
3.
To turn the motor fan off, press the OFF button.
• Do not flambe under the cooker hood.
• Accessible parts may become hot when used with cooking appliances.
Hob Lighting
The hob lighting can be switched on and off independently by pressing the LAMP
button.
6
L90CHDB_SS11_IB_110728_Annie.indd 6
11年7月28日 下午4:15
Cleaning and Maintenance
• Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains
power supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket and the plug is withdrawn, or
– the fuse from the fused spur connection unit is withdrawn, or
– the mains fuse is disconnected.
• The surfaces and controls are susceptible to scratches and abrasions. Please observe the following
cleaning instructions.
• All external surfaces and controls can be cleaned using a little washing-up liquid applied with a damp soft
sponge or cloth.
Only use a damp cloth as water could get into the unit and cause damage.
• Wipe dry using a soft cloth.
Do not use:
• Cleaning agents containing soda, acids, chlorides or solvents.
• Abrasive cleaning agents, e.g. powder cleaners or cream cleaners and abrasive sponges, as well as
pot scourers or sponges which have been used previously with abrasive cleaning agents as these
will damage the surface material.
Grease Filters
The re-usable metal grease filters in the appliance remove solid particles (grease, dust, etc.) from the kitchen
vapours, preventing soiling of the cooker hood.
The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease.
An dirty filters is a fire hazard.
1.
To take out the grease filter, press the plastic catch.
2.
Pull the aluminium filter downwards.
To avoid damaging the filters or the hob
below, make sure you hold the filters
securely at all times when handling them.
2
1
7
L90CHDB_SS11_IB_110728_Annie.indd 7
11年7月28日 下午4:15
Cleaning the Grease Filters by Hand
• Clean the filters with a soft nylon brush in a mild solution of hot water and a little washing-up liquid. Do not
use “neat” washing up liquid.
Do not use:
• Cleaning agents containing descaling agents.
• Powder cleaners, cream cleaners or abrasive all-purpose cleaners.
• Oven cleaners.
Cleaning the Grease Filters in the Dishwasher
• Place the filters as upright as possible in the lower basket, with the short sides upright, and wash in
a 65°C programme, ensuring the spray arm is not obstructed.
• Use a mild dishwasher detergent.
Depending on the cleaning agent used, cleaning the filters in a
dishwasher can cause permanent discolouration to the surface.
However, this will not affect the functioning of the filters in any way.
• After cleaning, leave the filters to dry on an absorbent surface before replacing them.
• When removing the filters for cleaning, also clean off any residues of oil or fat from the now accessible housing
to prevent the risk of these catching fire.
When putting the grease filters back in position, ensure that the locking clips are facing down towards
the hob.
8
L90CHDB_SS11_IB_110728_Annie.indd 8
11年7月28日 下午4:15
Carbon Filter Usage
Your product is compatible with one type of carbon filter (carbon filters is not provided).
• Before installing or replacing the carbon filters, you should switch off and disconnect the electricity supply.
• The carbon filters should never be washed.
• The grease filters should be installed on the product even when carbon filters are not being used.
Do not use your product without the grease filters.
Replacing Carbon Filters
• It is necessary to install 2 carbon filters to your product.
• Open all the grease filters, see page 7 for details.
• To attach the carbon filters. Place them on the connection
channels on the motor and turn the left hand filter
anticlockwise and the right hand filter clockwise.
• In order to remove the carbon filters, turn the left hand
filter clockwise and the right hand filter anticlockwise.
• Replace the carbon filters when they no
longer absorb kitchen odours effectively.
They should, however, be replaced at least
every 3 months to prevent a risk of fire.
• Used carbon filters can be disposed of with
the normal household waste.
• Replace all the grease filters to the main unit.
Changing the Lamps
1.
Disconnect the electricity supply.
2.
Remove the aluminium grease filters.
3.
Two candle lamps are locate under the lamp
cover.
4.
Replace with a 40W 240V (E14) candle lamp.
9
L90CHDB_SS11_IB_110728_Annie.indd 9
11年7月28日 下午4:15
Hints and Tips
Problem
Cooker hood does not operate
Solution
• Check Electric connection. (The supply voltage should be 220-240 V. The cooker hood must
be connected to an earthed socket.)
• Check motor speed selector.
(Motor speed selector should be in position I, II or III.)
Lamp does not light
• Check Electric connection. (The supply voltage should be 220-240 V. The cooker hood must
be connected to an earthed socket.)
• Check lamp switch.
(Lamp switch should be in the on position.)
• Check lamps.
• Check aluminium filters.
(Aluminium grease filters should be washed once a month under
normal conditions.)
Air suction of cooker hood is weak
• Check air outlet chimney.
(Air outlet chimney should be open.)
• Check carbon filters.
(If the unit operates with carbon filters, they should be replaced
quarterly.)
If Cooker Hood Does Not Operate
Before Contacting Service:
Be sure that the mains plug is connected to the mains socket and the fuse in the installation is in good condition,
check your cooker hood according to the above table. If the problem continues, contact your retailer or an
authorised service agent.
10
L90CHDB_SS11_IB_110728_Annie.indd 10
11年7月28日 下午4:15
Technical Specification
Model no.
L90CHDB10 / L90CHDSS10
Extraction Rate (m3/h)
450
Voltage (V)
220 – 240 ~
Frequency (Hz)
50
Total Power (W)
180
Lamp
2 × 40 W
Features and specifications are subject to change without notice.
11
L90CHDB_SS11_IB_110728_Annie.indd 11
11年7月28日 下午4:15
Installation
Product Overview
1
2
3
4
5
6
1.
Grill For Air Outlet
4.
Internal Chimney Connection Plate
2.
Internal Chimney
5.
External Chimney Connection Plate
3.
External Chimney
6.
Hanging Plate
12
L90CHDB_SS11_IB_110728_Annie.indd 12
11年7月28日 下午4:15
303
276
40
55
400
20
480-860
400
80
500
900
All dimensions shown are in mm.
13
L90CHDB_SS11_IB_110728_Annie.indd 13
11年7月28日 下午4:15
Safety Distance Between Hob and Cooker Hood
When planning the installation height of your cooker hood, the minimum safe distance between the
top of a cooker or hob and the bottom of the cooker hood are as follows, unless a greater distance is
specified by the manufacturer of your cooking appliance:
650 mm — above electric hobs and cookers
750 mm — above gas hobs and cookers
• When deciding on the safe distance between the hob and cooker hood, please note that a distance greater
than 650mm above electric cookers/hobs may be preferable to give more working space under the hood.
• Account should also be taken of the height of the person who will be using the hood most often. The person
should have sufficient space to work comfortably at the hob, and also be able to reach the hood controls with
ease.
• Please be aware that if positioned too high, extraction will be inefficient.
• If you want the top of the cooker hood telescopic extension piece to be mounted flush with the ceiling, make
sure there is adequate space below the appliance for working. See maximum/minimum appliance height.
Min.650 mm
Min.750 mm
14
L90CHDB_SS11_IB_110728_Annie.indd 14
11年7月28日 下午4:15
Connection for Air Extraction
To avoid the danger of toxic fumes, please observe the Safety Warnings.
This is especially crucial when using the cooker hood at the same time as another heating appliance
which relies on air from the same room.
The cooker hood should be installed according to local and national building regulations. Seek
approval from the building inspector where necessary.
Only use smooth pipes or flexible hoses made from non-flammable materials for the extraction ducting.
To achieve the greatest possible air extraction with the lowest noise level, please note the following:
• To ensure efficient air extraction, the diameter of the exhaust ducting should not be less than 120mm.
• If flat ducting is being used, the cross-sectional area must not be smaller than the cross sectional area of the
exhaust connection.
• All ducting, pipework and fittings must be of non-flammable materials.
• The exhaust ducting should be as short and straight as possible.
• Only use wide radius bends.
• The exhaust ducting should not be kinked or compressed.
• Ensure that all connections are strong and airtight.
• Where ducting is horizontal, it must be laid to slope away at least 1 cm per metre. This is to ensure that
condensation cannot drain back into the cooker hood.
• If the exhaust air is to be ducted into the open air, the installation of a telescopic wall vent or roof vent is
recommended.
If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations
in temperature between the different areas, the problem of condensation will need to be addressed.
The exhaust ducting will need to be suitably insulated.
15
L90CHDB_SS11_IB_110728_Annie.indd 15
11年7月28日 下午4:15
Mounting the Cooker Hood
• We recommend professional tradespersons are consulted prior to the fitting of this appliance.
• Each installation is different and these instructions should be used as a guide only. If in doubt
consult professional tradespersons.
• Air must not be discharged into a flue that is used for exhausting fumes from appliances burning
gas or other fuels.
1.
We recommend for air extraction installations, a professional tradesperson is consulted prior to any work
being undertaken. A 150mm or 120mm hole will need to be provided for the aluminium flexible hose (not
supplied) to duct the extracted air to the outside. For recirculation operation, a competent person can follow
the instructions below. If you are in any doubt, we recommend you consult a professional tradesperson.
2.
Ensure there is an available switched mains socket adjacent to the hood to power the appliance. If this
is not available, do not use extension leads. We recommend you consult a qualified electrician prior to
commencing any work.
3.
You can either use the drill template to mark the position of the fixing screws or position the hood on the
wall (make sure the minimum distance should be 650mm above electrical hob and 750mm above gas hob)
and mark the position "A", "B", "C", "D" and "E" as shown.
300
230
A
E
F
B
G
242
250
C
D
256
4.
Screw the External Chimney to the External Chimney Connection Plate by using 2 pcs of the 4 x 8mm screws
through the mounting holes at the top of External Chimney. Screw the Internal Chimney to the Internal
Chimney Connection Plate by using the other 2 pcs of 4 x 8mm screws through the mounting holes at the
top of Internal Chimney.
Before drilling any holes, ensure there is no pipe work or wires buried in the wall.
16
L90CHDB_SS11_IB_110728_Annie.indd 16
11年7月28日 下午4:15
5.
Assembling Hanging Plate Holes
Drill (A, B, C, D, E) holes on marked points by
using a Ф8mm drill bit. Push 5pcs plastic wall
plugs into the drilled holes (A,B.C.D.E) Put the
hanging plate on the holes A; B; E. Using the
supplied 4X40mm screws; screw the hanging
plate into the A, B, E holes.
6.
Mounting the Hood to Wall
Hang the hood on the two hooks (F, G) on the
Hanging Plate. Using the supplied 4X30mm
screws screw the Hood into Ф8mm wall plugs
(D.E) fixed in the wall.
Ensure the hood is level and then fully tighten
all the screws.
7.
Mounting the Chimneys to Wall
Place the External Chimney over the Internal
Chimney and over the hood motor enclosure.
Adjust the height you want for the Internal
Chimney. Mark the positions "H" "I" "J" "K" as
shown. Drill (H, I, J, K) holes on marked points
by using a Ф8mm drill bit. Push 4pcs plastic wall
plugs into the drilled holes (H, I, J, K).
Screw the External Chimney into Ф8mm wall
plugs (H.I) fixed in the wall.
Screw the Internal Chimney into Ф8mm wall
plugs (J.K) fixed in the wall.
8.
Ensure all protective coverings have been
removed from the metal surfaces prior to use.
9.
Follow the operation instructions in this manual
for safe operation of this appliance.
17
L90CHDB_SS11_IB_110728_Annie.indd 17
11年7月28日 下午4:15
Safety Warnings
• This appliance complies with all relevant local and
national safety requirements. Inappropriate use
can, however, lead to personal injury and damage
to property.
• To avoid the risk of accidents and damage to the
appliance, please read these instructions carefully
before using it for the first time. They contain
important information on the safety, installation,
use and maintenance of the appliance.
• Keep these instructions in a safe place and ensure
that all users are familiar with the contents. Pass
them on to any future owner of the appliance.
Correct Application
• This appliance is not designed for commercial use.
It is intended for use in domestic households.
• It must only be used as a domestic appliance to
extract vapours and remove odours from cooking.
• Any other usage is not supported by the
manufacturer and could be dangerous.
The manufacturer cannot be held liable for
damage resulting from incorrect or improper use
or operation of the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
or knowledge, unless they have been given
supervision or instruction concerning its use by a
person responsible for their safety. Do not flambé
under the cooker hood.
• Accessible parts may become hot when used with
cooking appliances.
• If the supplied mains cable is damaged, it must
be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
Safety with children
• This appliance is only intended for use by adults
who have read these instructions.
Correct Use
• Never use an open flame beneath the cooker hood.
To avoid the danger of fire, do not flambé or grill
over an open flame under the cooker hood.
When switched on, the cooker hood could draw
flames into the filter. Fat particles drawn into the
cooker hood present a fire hazard.
• W
hen using the cooker hood over a gas hob,
ensure that any burners in use are always covered
by a pan. Switch the cooking zone off when a pan
is removed, even for a short time.
• Regulate the flame so that it does not burn up the
sides of the pan.
• Do not allow the pans to overheat excessively (e.g.
when using a wok).
• The cooker hood can become damaged when
exposed to excessive heat.
• A
lways switch the cooker hood on when a cooking
zone is in use, otherwise condensation may collect
in the hood, which could cause corrosion.
• W
hen cooking with oil or fat, chip pans and deep
fat fryers etc, do not leave the pans unattended.
Never leave an open grill unattended when grilling.
Overheated oil and fat can ignite and could set the
cooker hood on fire.
• D
o not use the cooker hood without the filters in
place. This way you will avoid the risk of grease and
dirt getting into the appliance and hindering its
smooth operation.
• T he filters should be regularly cleaned or changed
as appropriate. Saturated filters are a fire hazard.
See "Cleaning and Maintenance".
• T he cooker hood can get very hot during cooking
due to heat rising from the hob.
Do not touch the housing or the grease filters until
the cooker hood has cooled down.
• D
o not use a steam-cleaner to clean this appliance.
Steam could reach the electrical components and
cause a short circuit.
• This appliance is not a toy! To avoid the risk of
injury, keep children well away and do not allow
them to play with it or to use the controls. They
will not understand the potential dangers posed
by it. They should be supervised whenever you are
working in the kitchen.
Technical safety
• Older children may use the cooker hood only when
its operation has been clearly explained to them
and they are able to use it safely, recognising the
dangers of misuse.
• Before connecting the appliance to the mains
supply, make sure that the voltage and frequency
details given on the data plate correspond with the
on-site electricity supply, otherwise the appliance
could be damaged. Consult a qualified electrician if
in any doubt.
• Before installation, check the cooker hood for
visible signs of damage. Under no circumstances
should you use a damaged appliance. It could be
dangerous.
18
L90CHDB_SS11_IB_110728_Annie.indd 18
11年7月28日 下午4:15
• The electrical safety of this appliance can only be
guaranteed when continuity is complete between
the appliance and an effective earthing system
which complies with current local and national
safety regulations. It is most important that this
basic safety requirement is present and tested
regularly, and where there is any doubt, the
household wiring system should be inspected by a
qualified electrician. The manufacturer cannot be
held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Using at the same time as other heating
appliances that depend on the air from the same
room.
WARNING: Danger of toxic fumes.
• For safety reasons, this appliance may only be used
when it has been fully installed.
• Only open the housing as described in the
instructions. Under no circumstances should any
other parts of the housing be opened. Tampering
with electrical connections or components and
mechanical parts is highly dangerous to the user,
and can cause operational faults.
• Installation, maintenance and repairs may only be
carried out by an authorised person in accordance
with current national and local safety regulations.
Repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be
held liable for unauthorised work.
• Faulty components must only be replaced by
genuine original parts.
• During installation, maintenance and repair work,
the appliance must be disconnected from the
mains electricity supply. It is only completely
isolated from the electricity supply when:
a)it is switched off at the isolator, or
b)the mains fuse is disconnected, or
c)it is switched off at the wall socket and the plug
withdrawn, or
d)the fuse to the fused spur connection unit is
withdrawn.
• Do not connect the appliance to the mains
electricity supply by a multi-socket unit or an
extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of
overheating). This appliance may only be used
in mobile installations if a risk assessment of the
installation has been carried out by a suitably
qualified engineer.
• G
reat care should be taken when using the cooker
hood at the same time and in the same room or
area of the house as another heating appliance
which depends on the air in the room. Such
appliances include gas, oil, wood or coal-fired
boilers and heaters, continuous flow or other water
heaters, gas hobs, cookers or ovens which draw
air in from the room and duct exhaust gases out
through a chimney or extraction ducting.
• When used in extraction mode, the appliance
draws air in from the room in which it is installed
and from neighbouring rooms.
• If there is insufficient air, an underpressure will
occur. The heating appliance may be starved of
oxygen, impairing combustion.
• Harmful gases could be drawn out of the chimney
or extraction ducting back into the room, with
potentially fatal consequences.
• In order to ensure safe operation, and to prevent
gases given off by the heating appliances from
being drawn back into the room when the
cooker hood and the heater are in operation
simultaneously, an underpressure of 0.04 mbar (4
pa) is the maximum permissible in the room.
• In areas which may be subject to infestation
by cockroaches or other vermin, pay particular
attention to keeping the appliance and its
surroundings in a clean condition at all times.
19
L90CHDB_SS11_IB_110728_Annie.indd 19
11年7月28日 下午4:15
Correct Installation
• Refer to the cooker or hob manufacturer's
instructions as to whether a cooker hood may be
operated above the cooker/hob.
• T he minimum safe distances between the top of
the cooker or hob and the bottom of the cooker
hood given in the Installation section of this
booklet must be maintained, unless the hob/
cooker manufacturer states that a greater safe
distance is required.
• Ventilation can be maintained by air inlets which
must not be blocked, in windows, doors and
outside wall vents, or by other technical measures,
such as ensuring that the cooker hood can only
be switched on when the heating appliance is
switched off or vice versa. A ventilation brick alone
is not generally sufficient to ensure safe ventilation.
The overall ventilation condition of the
dwelling must be taken into account. If
in any doubt, the advice of a competent
builder or, for gas, a qualified gas fitter
(Gas Safe registered in the UK) must be
sought.
• One of the following technical measures may be
necessary to ensure safe operation.
• If the only way of ensuring adequate ventilation
is via an open window, a window contact switch
should be fitted to ensure that the cooker hood
can only operate when the window is opened
sufficiently. A window contact switch kit is
available from good builders' merchants. Take
care when ventilating the room through an open
window that ventilation is not impaired by a closed
blind or curtain.
• If more than one appliance is fitted beneath the
cooker hood, and they have different minimum
safe distances to the cooker hood, select the
greater distance.
• S afety regulations prohibit the fitting of a cooker
hood over solid fuel stoves.
• A
ll ducting, pipework and fittings must be of nonflammable material. These can be obtained from
builders' merchants.
• T he appliance must not be connected to a chimney
or vent flue which is in use. Neither should it be
connected to ducting which ventilates rooms with
fireplaces.
• I f exhaust air is to be extracted into a chimney or
ventilation duct no longer used for other purposes,
seek professional advice.
Accessories
• Only use genuine original spare parts and
accessories with this appliance.
The manufacturer cannot be held liable
for damage caused by non-compliance
with these Warning and Safety
instructions.
If in any doubt , the advice of a qualified
builder, gas fitter (Gas Safe registered in the
UK) or electrician must be sought.
• If the hood is being operated in recirculation mode,
the above restrictions do not apply.
20
L90CHDB_SS11_IB_110728_Annie.indd 20
11年7月28日 下午4:15
If you require a replacement for any of the items listed below, please quote their corresponding part numbers:
Replacement Part
Part Number
Hanging Plate
HP-U-01
External Chimney Connection Plate
HP-EC-01
Internal Chimney Connection Plate
HP-IC-01
LEC90CHB (for L90CHDB11)
External Chimney
LEC90CHSS (for L90CHSS11)
LIC90CHB (for L90CHDB11)
Internal Chimney
LIC90CHSS (for L90CHSS11)
Ф7.5 x 37mm Plastic Wall Plug
PWP75/37
4 x 8mm Screws
S4/8
4 x 30mm Screws
S4/30
4 x 40mm Screws
S4/40
Adapter
AD
Drill Template
DNT-L90CHDB11
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct
to your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456 (UK
customers only).
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
DSG Retail Ltd. • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
(PN: L90CHDB_SS11-001)
L90CHDB_SS11_IB_110728_Annie.indd 21
11年7月28日 下午4:15
L90CHDB_SS11_IB_110728_Annie.indd 22
11年7月28日 下午4:15
L90CHDB_SS11_IB_110728_Annie.indd 23
11年7月28日 下午4:15
L90CHDB_SS11_IB_110728_Annie.indd 24
11年7月28日 下午4:15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement