Geberit AquaClean 8000plus shower toilet Operating instructions

Below you will find brief information for shower toilet AquaClean 8000plus. The Geberit AquaClean 8000plus is a toilet which is also designed for cleansing the anal area and, with the lady shower, for cleansing the vaginal area. A single water jet cleans your bottom with a pleasant and gentle feel. Application is simple yet effective. Toilet paper, a towel or the integrated dryer can be used for drying. Additional functions like the oscillating spray, the lady shower for natural cleansing of the sensitive female genital area, a pulsating massage spray, warm air dryer, remote control or memory function round off this shower concept.

PDF Download

Document

Geberit AquaClean 8000plus

Operating instructions

Operating instructions Geberit AquaClean 8000plus

For true well-being .................................................................................................. 4

Added value for health and well-being.............................................................................. 4

Easy to operate................................................................................................................ 4

Any questions about Geberit AquaClean? ........................................................................ 4

Warranty card registration ................................................................................................ 4

Environment..................................................................................................................... 4

Important notes ...................................................................................................... 5

Intended use.................................................................................................................... 5

Declaration of conformity ................................................................................................. 5

For your safety ................................................................................................................. 5

Operation......................................................................................................................... 5

Explanation of symbols .................................................................................................... 5

Geberit AquaClean 8000plus operation .................................................................. 6

Overview of controls ........................................................................................................ 6

Control panel ................................................................................................................... 6

Geberit AquaClean 8000plus remote control.................................................................... 7

Additional functions of the Geberit AquaClean 8000plus remote control........................... 8

Integrated control panel ................................................................................................. 10

Using Geberit AquaClean 8000plus ................................................................................ 11

Using the lady shower..................................................................................................... 12

What you should know ......................................................................................... 13

Spray shield ................................................................................................................... 13

Storing the remote control ............................................................................................. 13

WC seat and lid with lowering function........................................................................... 13

User-defined settings ............................................................................................ 14

Saving user profiles......................................................................................................... 14

Basic settings ................................................................................................................. 15

Restoring the factory setting ........................................................................................... 15

Care and cleaning ................................................................................................ 16

Care instructions............................................................................................................ 16

Components.................................................................................................................. 16

Permissible cleaning agents and cleaning equipment ..................................................... 17

Non-permissible cleaning agents and cleaning equipment ............................................. 18

Tips................................................................................................................................ 19

Cleaning the WC seat, WC lid and casing ....................................................................... 20

Cleaning the hinges, the cover, the dryer arm and the spray arm .................................... 20

Cleaning the WC ceramic appliance................................................................................ 21

Troubleshooting ................................................................................................... 22

Malfunctions during operation ........................................................................................ 22

Replacing the remote control batteries............................................................................ 24

Replacing the active carbon filter..................................................................................... 25

Refilling nozzle cleaner .................................................................................................... 26

Replacing the spray nozzle and cleaning the opening of the spray arm ........................... 27

Replacing the dryer arm and cleaning the opening of the dryer arm ................................ 28

Removing and fitting the WC seat and WC lid ................................................................. 29

Technical data ...................................................................................................... 30

End user warranty ................................................................................................ 31

Operating instructions Geberit AquaClean 8000plus

For true well-being

The Geberit AquaClean 8000plus is a toilet which reclaims the source of freshness and cleanliness: water. A single water jet cleans your bottom with a pleasant and gentle feel. Application is simple yet effective. Toilet paper, a towel or the integrated dryer can be used for drying.

Added value for health and well-being

Additional functions like the oscillating spray, the lady shower for natural cleansing of the sensitive female genital area, a pulsating massage spray, warm air dryer, remote control or memory function round off this shower concept.

Easy to operate

Operation is effortless, requiring you simply to either press the clearly labelled buttons on the side of the unit or use the remote control, via which you can also call up your personal settings.

Any questions about Geberit AquaClean?

Our after-sales team will be happy to respond to your enquiries.

Please contact your responsible Geberit sales company.

Warranty card registration

So that we can provide you with optimum support, please take the opportunity to register your contact details online - the process is very straightforward and takes next to no time to complete.

• www.geberit-aquaclean.com

Environment

This product meets the requirements of the EU directive "Restriction of Hazardous

Substances" (2002/95/EC). It is largely free from hazardous substances such as lead, mercury, cadmium and chrome VI, which are environmental pollutants.

All old Geberit AquaClean 8000plus can be returned to Geberit free of charge for proper disposal. This arrangement applies to all EU member states as well as to

Switzerland and Norway. Equipment can be returned to the responsible Geberit sales company (see the website of your respective country for the address).

Operating instructions Geberit AquaClean 8000plus

Important notes

Intended use

The Geberit AquaClean 8000plus is a toilet which is also designed for cleansing the anal area and, with the lady shower, for cleansing the vaginal area. Its use for any other purpose is deemed improper. Geberit accepts no liability for the consequences of improper use.

Declaration of conformity

You can obtain a copy of the declaration of conformity from your responsible Geberit sales company.

For your safety

• In the event of evidence of damage to the Geberit AquaClean, disconnect the unit from the mains immediately and contact Geberit Customer Service.

• If the mains connection cable is damaged, it must be replaced by a skilled person.

• Never open and repair the Geberit AquaClean yourself. Do not modify the unit or add any additional modules. The Geberit AquaClean contains live parts. Opening the unit exposes those present to fatal danger.

• Repairs may only be carried out by trained and authorised skilled persons using original spare parts and accessories.

• The Geberit AquaClean must only be connected to a mains voltage conforming to the specification plate. The specification plate is located behind the maintenance flap. You will find more technical data in the chapter titled "Technical data".

Operation

• People who are not familiar with the Geberit AquaClean 8000plus, especially children, must be shown how to use it.

• Everyone's temperature sensitivity is different. Please always check the dryer and water temperature settings before using the Geberit AquaClean 8000plus.

• Operation and maintenance work may only be performed by the operator or user as described in these operating instructions.

• The Geberit AquaClean 8000plus may only be operated with drinking water.

Explanation of symbols

DANGER

Refers to a potentially dangerous situation that may cause serious injury or death.

Refers to important information.

Operating instructions Geberit AquaClean 8000plus

Geberit AquaClean 8000

plus operation

Overview of controls

7

1 Control panel

2 Power switch

3 Active carbon filter compartment

4 Maintenance flap

5 Serial number

6 Filling tray for nozzle cleaner

7 Cleaning instructions

1

2

3

6

5

4

8 Spray arm

9 Dryer arm

10 User detection

88

99 Control panel

1

2

3

4

5

6

1 Spray intensity

2 LED displays

3 Odour extraction unit

4 Drying

5 Start and stop shower

6 Remote control compartment

Operating instructions Geberit AquaClean 8000plus

Geberit AquaClean 8000plus remote control

D14

D13

D12

D11

D10 D9 D8

Display

D1 Shower water / dryer air temperature display

D2 Dryer temperature

Service icon

Water heater function status indicator

Nozzle cleaner refill icon

Filter replacement symbol

Odour extraction unit

Drying

D9 Spray arm position

D10 Oscillating spray

D11 Massage spray

D12 Spray intensity

D13 Error icon

D14 Activated user profile I/II/III/IIII

Buttons

1 <Shower>, start and stop

2 <Spray intensity ->, reduce

<Spray intensity +>, increase

<Oscillating spray>, start and stop

<Spray arm position> forwards and backwards

ON/economy mode/OFF

<Massage spray>, start and stop

<User profiles I/II/III/IIII>, on and off

The Geberit AquaClean 8000plus with visible cistern supports three user profiles.

This version also supports a <toilet flush> button for activating the toilet flush.

Operating instructions Geberit AquaClean 8000plus

Additional functions of the Geberit AquaClean 8000plus remote control

You can use the remote control to call up all of the additional functions or to make and save personal settings. To activate the remote control, touch any button once. The display appears. The display switches off automatically 10 min after use.

To access all buttons, slide the cover until the stop position is reached.

The low spray intensity has a pleasant and gentle feel whilst cleaning.

Press the button: The spray arm moves into position and the shower procedure starts. The shower stops after 20 s. You can stop the shower before this by pressing the <shower> button.

Press the button: Triggers a full flush

(available only on Geberit AquaClean 8000plus with visible cistern).

Press the button: The user profile is activated with its saved settings.

The pulsating massage spray is pleasant and relaxing.

Press the button: The massage spray is activated. The function can be activated before or during the shower procedure.

Press the button again: The massage spray is deactivated.

To suit your sitting position, the spray arm can be moved forwards or backwards through seven positions in accordance with the directions shown on the arrow button.

Press the button: Sets the position of the spray arm.

The oscillating spray intensifies cleaning efficiency.

Press the button: The oscillating spray is activated. The function can be activated before or during the shower procedure.

The spray arm moves back and forth.

Press the button again: The oscillating spray stops.

Operating instructions Geberit AquaClean 8000plus

Press the button:

• : Heating element is switched on. The water temperature is preset to 37 °C

• : Economy mode (factory setting). In economy mode, the heating element only switches on if user detection is activated. The warm-up

• time is 3 to 4 minutes.

: Heating element is switched off.

Sets the required shower water temperature.

Press the button: Increase or reduce temperature.

Sets the required dryer air temperature.

Prerequisite: Select the drying function.

Press the button: Increase or reduce temperature.

To deactivate the spray functionality for manual cleaning or for changing the spray nozzle or dryer nozzle.

Press the button: The spray arm / dryer arm extends but is not in operation.

See chapter "Troubleshooting" for more information.

Geberit AquaClean 8000plus for concealed cisterns:

• Press the actuator button on the actuator plate on the wall (large actuator button for full flush, small actuator button for partial flush)

Geberit AquaClean 8000plus with visible cistern:

• Press the actuator button on the cistern (large actuator button for full flush, both actuator buttons for partial flush) or

• Press the <toilet flush> button on the remote control (full flush)

Operating instructions Geberit AquaClean 8000plus

Integrated control panel

Blue LED

Lights up

Does not light up

Red LED

Lights up

Flashing

<Shower>, starting and stopping

Press the button: The spray arm moves into position and the shower procedure starts. The shower automatically stops after 20 s.

You can stop the shower before this by pressing the

<shower> button.

Press the button again: The shower stops.

Adjust the sliding button during the shower procedure to change the spray intensity of the anal shower or the lady shower.

There are seven spray intensity levels to choose from.

Prerequisite: Odour extraction unit is switched on.

The odour extraction unit starts as soon as someone sits down on the toilet.

Press the button: The odour extraction unit stops.

Press the button again: The odour extraction unit starts.

Prerequisite: Drying is activated.

Drying starts after the shower procedure and stops as soon as you stand up. You can interrupt drying before this by pressing the <drying> button.

Press the button: Drying stops.

Press the button again: Drying starts.

Meaning

Heating element is switched on. In economy mode (factory setting), the heating element only switches on if user detection is activated

Heating element is switched off

Meaning

Replace active carbon filter or refill nozzle cleaner

Error message (see "Troubleshooting")

Operating instructions Geberit AquaClean 8000plus

Using Geberit AquaClean 8000plus

Shower concept:

• The spray nozzle is automatically cleaned with fresh water before and after each shower procedure.

• The rinsing chamber and spray nozzle are also cleaned after each shower procedure with a cleaning agent and then cleaned with fresh water.

You control the intensity and aim of the water jet.

The shower spray gradually cools down continuously during the shower procedure.

Prerequisites

Odour extraction unit and drying are activated.

Thanks to the user detection, the shower procedure can only be activated once someone sits down on the toilet. The Geberit AquaClean 8000plus can be used as a normal toilet at any time.

1 Sit down on the toilet.

Result

The odour extraction unit starts automatically, ensuring that you do not leave any unpleasant odours behind. It stops as soon as you stand up.

2 Press the <shower> button.

Result

The shower starts and stops after 20 s.

You can end the shower procedure before this by pressing the <Shower> button.

The warm air dryer starts automatically at the end of the shower procedure. It stops as soon as you stand up or press the <drying> button.

Operating instructions Geberit AquaClean 8000plus

• Press the actuator button on the actuator plate on the wall (large actuator button for full flush, small actuator button for partial flush)

Geberit AquaClean 8000plus with visible cistern:

• Press the actuator button on the cistern (large actuator button for full flush, both actuator buttons for partial flush) or

• Press the <Toilet flush> button on the remote control (full flush)

Using the lady shower

You control the intensity and aim of the water jet.

The shower spray gradually cools down continuously during the shower procedure.

1 Press the <lady shower> button.

Result

The lady shower starts and stops after 20 s.

You can stop the shower before this by pressing the <shower> button.

The warm air dryer starts automatically at the end of the shower procedure. It stops as soon as you stand up or press the <drying> button.

Operating instructions Geberit AquaClean 8000plus

What you should know

Spray shield

The spray shield can be used to test the performance of the Geberit AquaClean

8000plus without anyone sitting on the toilet. You have to cover the user detection and can use the remote control to test all functions.

1 Spray shield

2 User detection

Storing the remote control

The remote control can be stored in the remote control compartment or in a separate wallmounted holder.

WC seat and lid with lowering function

Do not press the WC seat and lid down with your hand. This will damage the dampers.

Dampers cushion the WC seat and lid noiselessly and slow down closing. The seat and lid open just like any normal WC seat and lid.

Operating instructions Geberit AquaClean 8000plus

User-defined settings

Saving user profiles

Every user responds differently. That is why it is possible to personalise the following functions:

• Spray intensity

• Water temperature

• Spray arm position

• Odour extraction unit on and off

• Drying on and off

• Dryer temperature

• Massage spray on and off

• Oscillating spray on and off

Simply use the memory function to avoid having to make your settings from scratch every time. Personal settings for the Geberit AquaClean 8000plus can be saved in a user profile.

The Geberit AquaClean 8000plus supports four (or three) possible user profiles.

All of the settings can also be changed and saved when the user detection is inactive, i.e. when no-one is sitting on the toilet.

1 Touch any function once to activate the remote control.

2 Set the desired values on the remote control.

3 Press and hold down the <user profile> button for 2 s.

Result

A signal sounds.

The settings are saved in the corresponding user profile.

Operating instructions Geberit AquaClean 8000plus

Basic settings

The following settings can be changed:

• Spray intensity

• Water temperature

• Spray arm position

• Dryer temperature

• Massage spray on and off

• Oscillating spray on and off

1 Touch any function once to activate the remote control.

2 Set the desired values on the remote control.

3 Press and hold down buttons <I> and <II> simultaneously for 2 s.

Result

A signal sounds.

The changes to the basic settings are saved.

Restoring the factory setting

` Press and hold down the <Service> and <Water heater function> buttons on the remote control simultaneously for 2 s.

Result

A signal sounds.

All factory settings are restored.

Operating instructions Geberit AquaClean 8000plus

Care and cleaning

Geberit AquaClean 8000plus is a high-quality, easy-care product.

The WC ceramic appliance has a special coating. This coating draws water drops together to form spheres which drip away very effectively. Residue such as limescale and dirt is taken up by the water drops and simply flushed away with them. This effect is very environmentally-friendly, as aggressive WC cleaning agents are no longer required. The WC seat and lid are easy to clean and, if necessary, to remove. Similarly, the spray nozzle can easily be replaced if it becomes blocked with limescale or clogged with dirt.

Aggressive cleaning agents can damage the material surface. Therefore, we ask that you follow the care and cleaning instructions below.

Care instructions

As a general rule, water, a mild washing-up liquid that is kind to the skin and a not scratching sponge or a soft cloth will suffice for regular cleaning. Take action to prevent the build-up of limescale deposits. When you have finished cleaning, wipe away any remaining drops of water on the cover with a soft cloth (do not use a cleaning agent when doing this).

Geberit recommends using the Geberit AquaClean cleaning set (article number

242.547.00.1).

Components

To meet demands for design and performance, the Geberit AquaClean 8000plus comprises a number of different components. Therefore, we ask that you follow the cleaning instructions below, as the warranty does not cover surface damage and material damage caused by improper use.

1

1 WC seat and WC lid

2 Hinges, cover, dryer arm and spray arm

3 WC ceramic appliance

4 Casing

2

3

4

Operating instructions Geberit AquaClean 8000plus

Permissible cleaning agents and cleaning equipment

Cleaning agents

Cleaning agents are permitted to have a low acid content; e.g. they may contain citric acid.

Cleaning agents should ideally be diluted with water.

Cleaning agents must be fluid.

Cleaning agents must be dermatologically tested.

The use of foaming cleaning agents is permitted.

Cleaning equipment

Sponge, eraser

Cloth, shammy leather

Toilet brush

Operating instructions Geberit AquaClean 8000plus

Non-permissible cleaning agents and cleaning equipment

Cleaning agents

The use of powdery cleaning agents, such as scouring powder or scouring agent, is not permitted.

The use of corrosive cleaning agents, such as concentrated drain cleaners, is not permitted.

The use of cleaning agents which may irritate the eyes or the skin is not permitted.

The use of cleaning agents with a high chlorine concentration is not permitted.

The use of abrasive cleaning agents such as sand or scouring liquid is not permitted.

Cleaning equipment

Scratching sponge

Steel wool, steel cleaner, scrubbing sponge

Operating instructions Geberit AquaClean 8000plus

Tips

Problem

Urine scale deposits on the WC ceramic appliance

Rusty water residue on the WC ceramic appliance

Fault clearance

To clean, apply a mild bathroom cleaner (pH value of 4 to 9) and let work for 30 min, then rinse with water. Cleaning gels and foam cleaners are particularly good for this type of cleaning, as they stick to sloping surfaces.

Will not damage the coating on the WC ceramic appliance.

To clean, apply a mild bathroom cleaner (pH value of 4 to 9) and let work for 30 min, then rinse with water.

Use of disinfectants

Limescale deposits on the WC ceramic appliance

Apply disinfectant with a soft cloth and wipe the components clean. Test the disinfectant for suitability.

To clean, apply a mild bathroom cleaner (pH value of 4 to 9) and let work for 30 min, then rinse with water.

Limescale deposits on the cover Apply a mild bathroom cleaner with a soft cloth and wipe the chrome cover clean. Then rinse with water and dry the cover.

Spray nozzle blocked with limescale or clogged by foreign bodies in the water

To clean the spray nozzle, submerge it in standard limescale remover for a few hours.

Operating instructions Geberit AquaClean 8000plus

Cleaning the WC seat, WC lid and casing

Do not use scratching sponges or scouring agents for cleaning. We also advise against the use of cleaners containing solvent or acid, limescale removers, vinegar and cleaning agents containing acetic acid. They corrode the surface and can lead to discolouration.

1 Wipe the components with a soft cloth and a mild washing-up liquid which is kind to the skin.

2 Dry the components with a soft cloth.

Cleaning the hinges, the cover, the dryer arm and the spray arm

1 Wipe the components with a soft cloth and a mild washing-up liquid which is kind to the skin.

2 Dry the components with a soft cloth.

Operating instructions Geberit AquaClean 8000plus

Cleaning the WC ceramic appliance

When cleaning the WC ceramic appliance, always lift up the WC seat and WC lid. Any vapours rising off cleaning agents can corrode the surface.

Do not use scratching sponges or abrasive scouring agents for cleaning.

1 Clean the WC ceramic appliance with a mild bathroom cleaner or a mild all-purpose cleaner.

2 Rinse the WC ceramic appliance with water.

3 Use a toilet brush to remove stubborn stains and rinse with water.

4 Wipe the cover with a soft damp cloth and then dry it.

Operating instructions Geberit AquaClean 8000plus

Troubleshooting

DANGER

Danger of fatal electric shock

` Never open and repair the device yourself

` Never replace damaged mains connection cables yourself

` Contact customer service

Malfunctions during operation

No function and [Error] appears on the remote control display

Mains plug is not connected to power outlet

Power switch is OFF

Defective fuse on electrical distributor

User detection IR window on upper housing section is dirty

Connect the mains plug. If the power outlet is located inside the casing, contact customer service

Switch on the power switch

Replace the fuse on the electrical distributor

Clean the IR window with a soft cloth

Software error

Power supply interrupted

Remote control is not working (no icons visible on display)

Batteries are flat

Switch the power switch off for

30 s and then back on again

Have the power supply checked by a skilled person

Hold the remote control next to the shower toilet and replace the batteries

No batteries have been inserted Hold the remote control next to the shower toilet and insert batteries

(3 x 1.5 V, type LR3 / AAA)

Batteries inserted incorrectly Hold the remote control next to the shower toilet and insert the batteries, ensuring the correct polarity

No connection between shower toilet and remote control

Hold the remote control next to the shower toilet and insert the batteries again

Remote control is defective Replace the remote control

Operating instructions Geberit AquaClean 8000plus

Shower water temperature is too low

Heating element is not switched on

Use the remote control to switch the <water heater function> ON

Warm-up time too short when heating element is in economy mode

Software error

Use the remote control to switch the <water heater function> ON

Switch the power switch off and back on again after 30 s

Odour extraction unit does not start

Automatic start of the odour extraction unit is deactivated

Switch on the odour extraction unit at the control panel

Shower spray is too weak or no water is spraying out at all

Spray intensity is set too low

Spray nozzle clogged or blocked with limescale

Increase the spray intensity

Clean or replace the spray nozzle

Spray arm does not retract

Dryer does not start

Low dryer output

Dryer arm does not retract fully

Power supply interrupted Restore the power supply. The spray arm will retract automatically

Shower toilet is defective

Dryer arm installed the wrong way round

Switch off the shower toilet and contact customer service

Automatic dryer start is switched off

Switch on the dryer at the control panel

Install the dryer arm correctly

Dryer arm is not clipped in Clip the dryer arm into the guide

Lowering function not working

Rattling noise after use

Water is continuously dripping into WC ceramic appliance

Hydraulics are defective

Left and right hinges are not closed

Unpleasant odour in spite of the odour extraction unit

Active carbon filter is spent

Nozzle cleaner tank is empty

Flush valve system is leaky

Contact customer service

Close hinges fully

Replace the active carbon filter

(art. no. 250.022.00.1)

Check the filling level and top up the nozzle cleaner tank with nozzle cleaner

(art. no. 250.028.00.1)

Contact customer service

Operating instructions Geberit AquaClean 8000plus

Water is dripping onto the floor

Red LED on control panel is lit

There is a leak Switch off the shower toilet.

Cut off the water supply and pull out the mains plug. If the power outlet and the water supply valve are located inside the casing, contact customer service

Active carbon filter is spent and

/ or nozzle cleaner tank is empty

(see remote control display, flashing icon)

Replace the active carbon filter

(art. no. 250.022.00.1) and / or

Top up the nozzle cleaner tank with nozzle cleaner

(art. no. 250.028.00.1)

Red LED on control panel is flashing and [Error] is displayed on the remote control

A safety device has switched off the shower toilet for a short period

Switch the power switch off and back on again after 30 s

Replacing the remote control batteries

The remote control requires 3 batteries (type 1.5 V LR3 / AAA).

Stand next to the shower toilet so that the remote control is detected.

1 Slide the cover of the remote control up until the stop position is reached.

2 Press down the catch, remove the cover and replace the batteries, ensuring the correct polarity.

Operating instructions Geberit AquaClean 8000plus

Replacing the active carbon filter

As soon as the icon starts to flash on the remote control and the red LED lights up on the control panel, the active carbon filter needs to be replaced.

1 Press the side of the maintenance flap and open it.

2 Open the active carbon filter compartment.

3 Remove and dispose of the spent active carbon filter.

4 Install the new active carbon filter.

5 Close the active carbon filter compartment and the maintenance flap.

Operating instructions Geberit AquaClean 8000plus

Refilling nozzle cleaner

As soon as the icon starts to flash on the remote control and the red LED lights up on the control panel, the nozzle cleaner needs to be refilled. If the nozzle cleaner tank is empty, only fresh water will be used to clean the spray nozzle.

Prerequisites

Geberit AquaClean 8000plus is switched on.

The nozzle cleaner may leak.

Do not squeeze the refill bottle.

1 Press the side of the maintenance flap and open it.

2 Pull out the filling tray as far as it will go.

3 Remove the cap from the nozzle cleaner and pour the nozzle cleaner into the filling tray.

4 Reinsert the filling tray and close the maintenance flap.

Operating instructions Geberit AquaClean 8000plus

Replacing the spray nozzle and cleaning the opening of the spray arm

1 Lift up the WC seat and WC lid.

2 Press the <service> button on the remote control.

Result

The spray arm extends without spraying any water.

3 Hold the spray arm with one hand and carefully remove the spray nozzle with the other.

4 Clean and de-scale the spray nozzle or replace it.

5 Press the <service> button.

Result

The spray arm returns to its starting position and the dryer arm extends without the fan being activated.

6 Press the <service> button.

Result

The dryer arm returns to its starting position.

7 Clean the opening of the spray arm.

8 Press the <service> button.

Result

The spray arm extends without spraying any water.

9 Connect the spray nozzle to the spray arm.

10 Press the <service> button.

Result

The spray arm returns to its starting position and the dryer arm extends without the fan being activated.

11 Press the <service> button.

Result

The dryer arm returns to its starting position.

Operating instructions Geberit AquaClean 8000plus

Replacing the dryer arm and cleaning the opening of the dryer arm

1 Lift up the WC seat and WC lid.

2 Press the <service> button on the remote control.

Result

The spray arm extends without spraying any water.

3 Press the <service> button.

Result

The spray arm returns to its starting position and the dryer arm extends without the fan being activated.

4 Turn the dryer arm 90° anticlockwise and carefully remove it from the guide.

5 Clean the opening of the dryer arm.

6 Clean the dryer arm and dryer nozzle under running water before drying them.

7 Push the clean dryer arm and the clean or new dryer nozzle back into the guide and turn 90° clockwise until the stop position is reached.

8 Press the <service> button.

Result

The dryer arm returns to its starting position.

Operating instructions Geberit AquaClean 8000plus

Removing and fitting the WC seat and WC lid

1 Lift up the WC seat and WC lid and release the two hinges by pressing down and sliding to the centre.

2 Remove the WC seat and WC lid from the device.

3 Once they have been cleaned, reinsert the WC seat and WC lid into the fastening.

Slide the two hinges outwards.

Result

The WC seat and WC lid are locked.

4 Close the WC seat and WC lid.

Operating instructions Geberit AquaClean 8000plus

Technical data

Nominal voltage

Mains frequency

Power consumption

Power consumption economy mode / with heating element switched on

Protection degree

Protection class

Length of mains connection cable

Air volume flow rate odour extraction unit

Air volume flow rate dryer

Flow rate, anal shower

Flow rate, Lady shower

Dryer temperature factory setting

Dryer temperature range

Water temperature factory setting

Water temperature range

Storage temperature

Spray time factory setting

Number of shower pressure settings, shower spray

Flow pressure range

Storage water heater capacity

Net weight

Gross weight

Maximum load WC seat / WC lid

Operating temperature

230 V AC

50–60 Hz

1000 W

1/9 W

IPX4

70 cm

10 m

12 m

2.1–5.5 l/min

1.4–3 l/min

45 °C

20–45 °C

37 °C

10–39 °C

–

10 – +60 °C

20 s

1–10 bar

2.0 l

32 kg

37 kg

150 kg

10–40 °C

Operating instructions Geberit AquaClean 8000plus

End user warranty

The following end user warranty is provided in addition to and does not affect your contractual partner's liability for defective products.

The Geberit company ("Geberit") responsible for the place of installation of the Geberit

AquaClean product ("product") shall provide the end user with a warranty for the product identified by the serial number on the warranty card. The scope of this warranty is as follows:

1. Geberit guarantees that the product shall be free from material defects and manufacturing faults for a period of 3 years ("warranty period") calculated from the date of installation at the end user's premises. Warranty scope:

• Within the first two years of the warranty period, a customer service representative authorised by Geberit shall rectify any material defects or manufacturing faults free of charge by repairing or replacing the defective parts.

• In the third year of the warranty period, Geberit shall supply replacements for defective parts free of charge to the customer service representative authorised by Geberit and contracted by the end user to repair the product.

The end user shall not be entitled to assert more extensive claims against Geberit on the basis of this warranty.

2. Claims can only be made under the warranty if:

• The product has been installed and put into operation by an installation company or by customer service personnel authorised by Geberit;

• No modifications have been made to the product; in particular, no parts have been removed, replaced or added; and

• The product defect has not been caused by improper installation or use, nor can it be attributed to inadequate care or maintenance;

• Claims shall only be made during the third year of the warranty period if the end user has completed the enclosed warranty card in full and returned it to the

Geberit company responsible for the place of installation within 90 working days of the installation date.

3. This warranty applies solely to places of installation in countries in which Geberit has its own sales company or is represented by a sales partner.

4. The warranty is exclusively subject to the substantive law of the country in which

Geberit has its place of business. The United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. The exclusive place of jurisdiction for all disputes arising from or in connection with this warranty is the location of Geberit's headquarters.

Operating instructions Geberit AquaClean 8000plus

First name:

Surname:

Company:

Address:

Postcode:

Town:

Installation date:

Signature:

Serial number

[ ] bahama beige

[ ] white alpine

[ ] manhattan

[ ] pergamon

Geberit Sales Ltd.

Geberit House

Academy Drive

Warwick

Warwickshire CV34 6QZ

T (0)1926 516 800

T (0)1926 516 809

In Eire T +44 1622 717 811

→ www.geberit-aquaclean.co.uk

Geberit International Sales AG

Dubai Branch

P.O. Box 54715,

Dubai Airport Free Zone

East Wing, Bldg- 4A, 4th Floor, 401,

Dubai - UAE

T +971 4 204 5477

F +971 4 204 5497

→ www.geberit.ae

Geberit Southern Africa (Pty.) Ltd.

17-15 Street, Eastgate Gardens

Commercial Park

Sandton, South Africa

T +27 11 444 5070

F +27 11 444 5992

→ www.geberit.co.za

965.369.00.0 (03)

Key Features

Anal and lady shower
Warm air dryer
Remote control
Oscillating spray
Massage spray
Memory function
User profiles
Odour extraction unit
Easy to operate
Easy to clean

Frequently asked questions

What is the difference between economy mode and heating element switched on?

In economy mode (factory setting), the heating element only switches on if user detection is activated. The warm-up time is 3 to 4 minutes. While in heating element switched on mode the water heater is always on and warms up the water to the preset temperature of 37°C for immediate use.

How do I change the spray intensity?

You can adjust the spray intensity using the control panel on the toilet or the remote control. There are seven intensity levels to choose from.

How do I clean the spray nozzle?

To clean the spray nozzle, submerge it in standard limescale remover for a few hours. You can also replace the spray nozzle if it becomes blocked with limescale or clogged with dirt.