OPERATING INSTRUCTIONS

E646

Owners Manual

English

English

Welcome!

Thank you for purchasing our company multimedia player!

To operate the unit correctly, please read the owner's manual carefully before using the unit. Keep these instructions and retain this booklet for future reference.

1

Simple Troubleshooting Guide

English

Problem

No power

Some errors occur in the LCD or no function when pressing the button.

Unable to receive stations.

Poor effect on receiving a station.

ACDs cannot be loaded.

The stereo Indicator " " is flashing.

No picture.

The picture noise appcars.

Cause/Solutlon

Check and make sure whether the fuse is blown, replace with the proper value if necessary.

Press the RESET button.

Check and make sure whether the antenna is inserted or the antenna is properly connected.

If so. Insert the antenna or connect it properly.

Antenna may not be the proper length . Make sure the antenna is fully extended or broken.

If broken. Replace the antenna with a new one.

The broadcasting signal is too weak.

The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location.

A Cds is loaded in the mechanism.

Tune in the frequency accurately.

The broadcasting signal is too weak.

(Set to the MONO mode) (page 12)

The Video line from main unit to the TV is

not connected properly.

Improper setting of the color system. Set the

color system to" PAL "or" NTSC". According

to the connected television.

The CDs is dirty or damaged.

Note: If any of the problem persist after check list had been made, consult your nearest service dealer.

Never attempt to disassemble your unit by yourself.

30

CONTENTS

Notes on Installation

Precautions

Wiring Diagram

Location of the control

Basic Operation

Radio Operation

Bluetooth Operation

DVD VCD MP3 CD Operation

Location of the Remote Control

Remote Control Operation

Playing WMA,MP3 and JPEG discs

Installation

Specification

Simple Troubleshooting Guide

2

English

27

29

30

11

13

14

26

5

6

3

4

7

9

10

Notes on installation

The unit is designed for 12V DC, negative ground operation system only. Before installing the unit, make sure your vehicle is connected to DC 12V negative ground electrical system.

T h e n e g a t i v e b a t t e r y t e r m i n a l must be disconnected before making connections, which can reduce damaging the un it due to short circuit.

Be sure to connect the color coded leads correctly according to th e diagram. Incorrect connections may cause the unit malfunction or damage the vehicle's electrical system.

Be sure to connect the speaker (-) leads to the speaker (-) terminal.

Never connect the left and right channel speaker cables each other or to the vehicle body.

Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in fire.

English

A f t e r t h e c o m p l e t i o n o f t h e installation and begin to play t h e u n i t ( i n c l u d i n g r e p l a c i n g t h e b a t t e r y ) , p l e a s e p r e s s t h e

RESET

button on the front panel w i t h p o i n t e d o b j e c t s ( s u c h a s ball-point pen)to set the unit to initial status.

3

Precautions

English

This unit can play the following discs only.

Type of disc

Label on the disc

Recorded material Size of disc

MP4

DVD

MP4

V I D E O

Sound and moving

Pictures

Sound and moving

Pictures

12cm/8cm

12cm/8cm

VCD

COMPACT Sound and moving

Pictures

12cm/8cm

VIDEO CD

DIGITAL AUDIO

MP3

MP3

Sound only

12cm/8cm

COMPACT

CD

Sound only

12cm/8cm

DIGITAL AUDIO

Note: The unit is compatible with.

DVD. VCD 1.0 / 2.0 / 3.0 VCD, CD-R, PICTURE-CD version Disc.

The manual conforms to

DVD. VCD. MP3 and CD. If no VC

D or

MP3

on some models you should

ignore them. White enjoying DVD, VCD, Mp3 and CD. The Display will automatically identify the

discs and indicate the corresponding words.

Do not attempt to modify the unit, modifying the unit may cause an accident.

Do not use your Cd s with paste residue or ink attached.

Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not work in extreme high or low temperature inside the vehicle is between +60 and-20 before turning your unit on.

To enjoy optimum sound and images

Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off.

(Shown as picture)

while playing, handle the discs as

Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.

follows:

(Shown as picture)

Handle the disc by its edge to keep the disc clean, and do not touch the surface.

4

Wiring Diagram

STANDARD CONNECT

AUX IN/R

AUX IN/L

REAR-R

RCAOUTPUT

REAR-L

RCAOUTPUT

SUBWOOFER OUT

FRONT-L

RCAOUTPUT

FRONT-R

RCAOUTPUT

AV-OUTPUT

ANTENNA

P.CONT

To ignition key

To Auto

Antenna

ORANGE

RED

BLUE

Front Lch

Speaker

Rear Lch

Speaker

WHITE/BLACK

WHITE

GREEN/BLACK

GREEN

YELLOW

BLACK

Memory back-up 12V

Negative Ground

Batting

GRAY/BLACK

Front Rch

Speaker

GRAY

PURPLE/BLACK Rear Rch

Speaker

PURPLE

5

Location of the Control

7 13 8 11 4

9 12 2 3

1 17 18

15 5

6

16

RESET

19

1

2

3

4

5

6

Reset Button

Power Button

Volume Control

Setting the sound

Characteristics

Loud button

LED Indicator

7

Mute Button

8

Clock Button

9

Mode Button

10

Remote Control Receptor

6

11

Band Selector

12

13

Tuning/Selecting

Tacks

P-EQ Button

14

Release Button

15

AMS Button

16

Number Buttons

17

Eject Button

18 Disk Slot

19

LCD Panel

14

English

10

Basic Operation

English

Initlal System Start-up

1.Operating the unit for the first time or after replacing the car battery,you

must reset the unit. Press

1 (RESET)

Button with a pointed object (such as a ball point pen) to set the unit to initial procedure.

Note: When some errors occur in the LCD display,

Display, you can also press

RESET button

to resume to normal. And it will erase the

clock setting and some memorized functions.

4. Repeatedly press 4

(SE L) button

to select the desired mode in the

following order:

VOL BAS TRE

FAD BAL

Note: After selecting the desired mode, you can

adjust the current level by rotating the

3 (VOL)

knob.

5 seconds after selecting the desired mode.

The unit will automatically return to the

current mode being displayed.

VOL BAL FAD

Turning The Unit ON/OFF

2. Press

2

(PWR) unit, and press it again to turn off

the unit.

Note: After the unit is off, if the volume level

is higher than it is in initial setting, it

will resume to initial status; if it is lower

than that in initial status, it still store

in the status which you set.

Setting EQ

5. While listening to the popular music,

classic music and rock music, you

Can adjust the sound quality to make

The procedure is as follows:

Vol/Bass/Tre/Bal(L-R)

/Fad(F-R) Selector

(P-EQ) button is first pressed and

"CLASS"appears in the display.

(Shown as picture)

3. For Volume Control , rotate

VOL

knob clockwise to increase the sound

level, and rotate it anticlock wise to

decrease the sound level.

7

Basic Operation English

POP mode is selected when

13 second time, and "POP" appears on the LCD. (Shown as picture)

Note: This windows is used for the unit with

remote control function. Without this

function you should ignore the operation

contents about remote control function.

Rock mode is selected when pressing

6 (P-EQ) button at the third time, and "ROCK" appears in the display.

(Shown as picture)

Band Selector

/Pause the playback

(BAND) button repeatedly

to select bands i n t he f ollowing

order: time to turn off the P-EQ system.

Note: Bass mode and Treble mode rerurn to initial settings when P-EQ system is on,

"BASS" and "TREBLE" disappear.

BAND FM1 FM2 FM3

MW2 MW1

Mute Function

During CD mode,press 1 PLAY button to suspend the playback.

down the sound output,

(Press it

againto revert to previous volume

level).

Sensor

7.Receptor for the card remote

commander.(for remote control

version only)

Radio Operation

English

Manual/Automatlc Tuning

2.

Automatic Tuning: Press

( or ) button continuously

to select a station upward or downward

respectively.

Manual Tuning: press and hold

( or ) button for more

than 3 seconds, the radio automatically

searches a station upward or down ward respectively and plays when it finds a staion.

Mode Selector

4. Press

( M O D E ) button to select

playback mode. If USB/SD card

exist, Mode button can switch

from each other. Press and hold

AUX IN mode

Scanning/Memorizing

Stations Automatically

(AMS) button to listen each

stored station wh ic h st or ed i n

Press and hold (AMS) button for

more than 3 seconds to activate

a u t o m a t i c a l l y m e m o r y s t o r i n g

function. The radio automatically

selects a station and has it stored

in any one of the number buttons

Note: The unit can be stored up to 6 stations for details band. Regarding the function of

8 9

Radio Operation

English

Number Buttons

5.Number buttons can help you store

your favorite station by pressing

any one of the number buttons. You

can follow the steps as below:

Press and hold any number button

(1~6) until Number appears

i n t he L C D d i s p l a y w h e n r e c e i v i n g

a s t a t i o n . A n d n o w t h e s t a t i o n i s

already stored in the corresponding

number button.

(See the picture)

Bluetooth function.

1.PAIR function

Power on the unit. You can used

your mobile phone to search and

fine the Bluetooth module in our

unit named ONTOPPCB. Press

and hold key EQ for about 2s,it

will display PAIR on the LCD

screen. Then you can use your

phone to bonding our Bluetooth

module with your mobile phone.

The entrance code of our

Bluetooth module is 8888.

You can store up to 18

FM

stations, up to 12

AM stations.

Bluetooth Operation

There are there keys to operate

Bluetooth module:

1. EQ key for PAIR function

2. SEL key for ANSWER function

3. LOUD key for HANGUP function

2.ANSWER function and HANGUP

function

After our Bluetooth module

bonded with your mobile phone.

When you have an incoming phone

call, the unit will ring and mute

the previous sound to indicate

that you have an incoming call,

at the same time, incoming phone

number will displayed on the LCD

screen.When you have anincoming

phone call, you canpress key SEL

to answer the callor press key LOUD

to HANGUP your phone call.

DVD VCD MP3 CD Operation English

1. While listening to (or watching)

DVD VCD CD MP3

,just insertaCds

( w i t h l a b e l e d s i d e u p ) i n t o t h e d i s k

S L O T t h e m e c h a n i s m w i l l

automatically switch on.If a Cds is

l oaded press (MOD) button to

start the playing.

Labeled side up

18

( or )

your favorite track upward or

downward respectively.Press and

( or )

fast forward or rewing the track

upward or downward respectively.

Playing Tracks Repeatedly

RESET

repeat playing function when you need

to repeat playing the track you like.

During DVD VCD CD version.

t o r e p e a t p l a y i n g t h e s a m e t r a c k .

repeat.

W h i l e l i s t e n i n g t o ( o r w a t c h i n g )

M P 3 , j u s t i n s e r t a C d s i n t o t h e w i l l a u t o m a t i c a l l y s w i t c h o n .

A n d t h e m e n u o n t h e d i s c w i l l d i s p l a y t o s e l e c t p l a y i n g p i c t u r e s o r m u s i c .

Selecting Tracks/F.F/REW

10 11

DVD VCD MP3 CD Operation

Scanning Tracks

Automatically

button, one of the number button

each track on the disc,

English to revert to normal play back.

Note: INT doesn t w ork d uring p laying

Playing Tracks in

Random Order

5. During playback, press

RDM

button, The unit plays any track

at random. Press

RDM

once more

t o return to normal playback mode.

Eject a Cds

1 17 15 8

RESET

disc.

12

Location of the Remote Control

English

8

6

4

16

19

1

11

24

20

5

14

13

9

23

21

15

25

22

17

18

3

10

12

2

7

6

7

4

5

8

1

2

3

9

10

11

12

13

Power Switch

Pause/Play Button

Mute Button

Selecting Menu Button

Local

Enter Button

Volume Control

Tuning/Selecting

Tracks/F.F/REW

Program Playing

Band Select

Loudness

Repeat Playing

Audio Effect

23

24

25

20

21

22

17

18

19

14

15

16

Number Button

Audio-Setting

PBC Menu

Subtitle-Setting

EQ Effect

Mode Switch

Stop/Reverse Button

Angle-Setting

Slow-motion play

Setup Menu

Title Display

Zoom-seting

13

Remote Control Operation

Replacing the Batt ery

When the range o f the o peration of the card r cell.Make sure the battery polayity before replace.

1.

pressin g the

Stoppe r

1

2. Put the button-type battery(+)mark

upward into the Battery Holder.

3. Insert the Battery Holder into the

Remote Control.

English

Power Button

On/Off the power.

Pause/Play Button

Press

( )

of

CD MP3 VCD.

DVD.

P ress it a gain to re turn to

normal playback mode.

Mute Button

3

more to resume the previous sound level.

Menu selector

( )

your desired m

6 (ENTER)

or press the play

butto to confirm.

Note: This function works in main menu

mode only. refer to page 13.

Note: Some models are not equipped with

remote control,you should ignore

the contents about remote control.

14

Remote Control Operation

English

Volume Increasing/Decreasing

(

VOL + or VO

L -

) but ton to increase or decrease the volume l evel re spec v

Band Selector

(BAND) button repeatedly

to select bands i n t he f ollowing

order:

BAND FM1 FM2 FM3

MW2 MW1

Tuning/Selecting Tracks

/FastRewind/Forward

During radio mode, continuously

( or ) button to a or upwa rd res pectively ; i f pres s and more

8

( or ) button for automatic search a station r t radio will downward or upward espectively until it finds a stat ion

During the playing mode, press

Repeat Playing/AMS

During DVD mode, firstly

the current track being played;

press it again to repeat playing all

the tracks. The third press it to

cancel the repeating functional.

During

CD MP3 VCD DVD

mode,

rewind or fast forward for you to desired your desired track quickly.

When

( or )

button, you can select your

p ortion d ownward o r u pward respectively

t h e cu r r e n t t r a c k b e i n g p l a y e d ; press it again to cancel the repeating

functional.

Note: In

DVD

mode. The initial

procedure is repeat playing all the tracks

Note: In radio mode

. press

12

(RPT)

to scan

each stored station 10seconds respectively

which stored in Number Buttons.

During

CD VCD DVD mode,you set the ord to play, you can follow th e steps as

Firstly press

16 (PBC) button, and then press

9

(PROG) b utton, and the television displays prog ra mming

P00:00.

You can s et the program order to play them by using

(0

~ 10+) button, and then press

2

Note:Program doesn't function in playing Mp3.

15

Remote Control Operation

Number Buttons

During radio mode , you can select one of the 6 stored stations on each hand by pressing any one of the number but ton 14

During the playing mode, you can select any track directly by

For example, if you need the fifteenth t r a c k , y o u c a n f i r s t p r e s s b u t t o n

10+ and then press button 5 , the th. corresponding track (15) Will be played.

Note: When button

10+

is first pressed, it works

as

10+

. It works as

20+

when pressed

at the second time, the third time 30+

and the like.

In PBC playback mode, Number Button is

not functional.

English

Playing PBC (menu)

During DVD mode only, when first time, PBC play back starts and the menu of entire disc appears on t h e t el e v i s i o n . A n d t h e n y o u c a n select your favorite track by using a t r a ck i s p l a y i n g , y o u c a n p r e s s

(STOP/RETURN)

button to return to the menu if you want to stop to select other tracks. To cancel PBC again.

Subtitle Selector

During DVD mode, press

17

(SUB-T)

button to switch the menu to Chinese or English.

Left/Right/Stereo Selector

During the playing mode, continuously press

(Audio) can change the sound to left / right speaker or stereo mode.

Note: There are S grades surrounding effect

in surround mode During VCD mode

you can see the different pictures indicating

different effects on the television.

16

Remote Control Operation

Mode Switch

Press

(MODE)

button to switch to playback mode

Stop the playback

In DVD mode, press

20

( ) to suspend the playback and press play to continue shown

TV.Press it to playback.

Note: in VCD M

n ce to stop.

MULT-ANGLE KEY

In

DVD

playing mode, press

(ANGLE) key, you can watch the

DVD

content from diferent angle.

Nate: In DVD. MP3 and CD. It is not the function

SLOW REVERSE/

SLOW ADVANCE KEY

Press Slow button when pictures moving, you can enter Slow Motion Playback mode.

Press the Slow button on the remote during playback. Press the button again on the remote to play at the next speed. Slow. Motion Playback has six speeds:1/2,1/3,1/4,1/5,1/6,1/7.With

each consecutive press of the button, the play speed decreases. If you press the button seven times, Slow Motion Playback cycles back to

Normal playback.

Press Play button to resume normal playback.

2

( ) key to, cancel slow reverse

/Slow advance function.

Nate: in Mp3 and CD. Tt ts not the function,

17

English

Remote Control Operation

Chap ter 4 Th e Setup Menu System

1. General Steps of Setup Menu

1) Press the Setup button, the main setup menu appears. A

When the main menu displayed, the DVD system will auto pause.

English Remote Control Operation English

Preview, Goto, Program, Repeat, A-B, Angle, language, Soundtrack, 3D, Record,

Display, Mute, Setup.

2. Setup Items lntroduction

SYSTEM SETUP

The system setup options are illustrated below:

2) Press the Left and Right arrow buttons to highlight the icon of the desired page, the press the Down or Right arrow button to activate that page; For example,if you want to setup the video page, press Right to highlight the video icon, the video page will be displayed on the screen.

TV SYSTEM

According to the Color System of the TV, you can choose the TV System.

AUTO: Choose this settin gs if your DVD player is connected to a multi-system TV.

NTSC: Choose this settings if your DVD player is connected to a NTSC TV.

PAL: Choose this settings if your DVD player is connected to a Pal TV.

PAL60: Choose this settings if your DVD player is connected to a PAL60 TV.

The default setting is NTSC.

3) Press the Down arrow button to highlight the desired option. Press Enter or press

Right to select, the choices of that option appear on the right; For example, press

the Down arrow button to highlight the BRIGHTNESS option, then press Enter

to select, the brightness choices choices appear on the right.

4) Press the Arrow buttons to highlight the Exit Setup option, then press Enter or

Setup again to exit Setup Menu.

Notes:

When setup, the pressing of the following buttons will turn off the setup menu, while the choices that have been changed will be saved : P/N,Subtitle,F.F,F.R. Vol+/-.PBC,

PBC, Title, Return, Play, Stop, Resume. Pause / Step, Next, Prev, S.F, S.R, Zoom,

18

SCREEN SAVER

If the screen saver is on, when your DVD player is in Stop, Open, or No Disc state, or there is a frame frozen for more than 60sec, the screen saver will be displayed.

This feature can protect the screen from damage.

ON: Choose this setting to act to activate the screen saver.

OFF: Choose this setting to cancel the screen saver

The default setting is ON.

19

Remote Control Operation English

VIDEO

Interlace-YUV: Choose this setting if your DVD player is connected to a TV with

Y, Cb, Cr video cables.

TV-RGB:Choose this setting if your DVD player is connected to a TV with an S-

P-SCAN:Choose this setting if your DVD player is connected to a progressive scan

TV with Y, Cb, Cr video cables.

PC-VGA:Choose this setting if your DVD player is connected to a progressive scan

TV or a monitor with a VGA video cable.

Notes:

When your DVD player output composite video, you can choose the setting randomly.

Choose TV-RGB/P-SCAN if your DVD player is connected to a progressive scan TV.

The default setting is TV-RGB.

Remote Control Operation English

PA S S W O R D

The password option is initialized locked, and you cannot sct the ratings limit or change the password. In order for the Ratings feature work, the password mode must be turned on. If you want to set the ratings limit, you will need to enter the default password, which is 0000, then press Enter to confirm. To change the password you will be prompted for the old password, then be prompted for a new. Enter a 4-digit number (this is your password).

TV TYPE

16:9 (Wide Screen):Choose this setting if your DVD player is connected to a wide screen TV. If you Choose this setting and you don t have a wide screen TV, the images on the screen may appear distorted due to vertical compression.

4:3LB (Letter Box): Choose this setting if your DVD player is connected to a normal ratio TV. connector You ll see the movies in their original aspect ratio

(height- to-width ra tio). You ll see the entire frame of the movie, but it will take up a smaller portion of the screen vertically. The movie might appear with black bars at the top and bottom of the screen.

4:3 PS (Pan & Scan):Choose this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won t be seen.

Notes:

The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose.

If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen.

You must adjust the screen setting depending on the type of the television you have.

20

R A T I N G

The Rating feature is a rating limit system, like movie ratings. It works with DVD discs that have been assigned a rating. This helps you control the types of DVD s that your family watches. There are two rating options: NO ADULT and KID SAFE

Select the VIEW ALL option to cancel the rating limit.

The default setting is VIEW ALL.

Notes:

If the password option is locked, you cannot set the ratings limit; the rating limit doe not work when the password option unlocked.

DEFAULT

Choose this option to resume all the setup options to default settings.

LANGUAGE SETUP

The language setup options are illustrated below:

Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose the

OSD language you prefer. Press Enter to confirm, and it will display OSD in that

21

Remote Control Operation

English

Ianguage;There are 8 iptional OSD languages: Chinese, English, Japan, French,

Spanish, Portuguese, German and Latin.

Remote Control Operation

V I D E O S E T U P

The video setup options are illustrated below:

Highlight the AUDIO LANG option,and press the Arrow buttons to choose the aud io language you prefer. Press Enter to confirm. If the disc you are playing has that language available, it will output audio in that language; There are 8 optional audio languages: Chinese, English, Japan, French, Spanish, Portuguese, German and Lat in.

English

B R I G H T N E S S

Use the Up and Down arrow button to move the scroll and adjust the brightness.

Highlight the SUBTITLE LANG option, and press the Arrow buttons to choose the subtitle language you prefer. Press Enter to confirm. If the disc you are playing has that language availa ble, it will displa ys subtitles in that language; There are 8 optional audio languages: Chi8nese, English, Japan, French, Spanish, Portuguese,

German, and Off

C O N T R A S T

Use the Up and Down arrow button to move the scroll and adjust the contrast.

Highlight the MENU LANG option, and press the Arrow buttons to choose the menu language you prefer. Press Enter to confirm. If the disc you are playing has that language av ailable, it w ill display s menu in the language; There are 8 optional menu language: Chinese, English, Japan, French, Spanish, Portuguese, German, and Off.

Notes:

If your preferred language isn t available, the disc s default lan guage will be pl ayed.

The default language of your DVD player is Chinese.

AUDIO SETUP

The audio setup options are illustrated below:

H U E

Use the Up and Down arrow button to move the scroll and adjust the hue.

.

22

S A T U R A T I O N

Use the Up and Down arrow button to move the scroll and adjust the saturation.

23

Remote Control Operation

TITLE KEY

In DVD VCD playing mode, tracks title on TV screen. Then press ( 0~ 10 +) key or press

4

( ) key to choose your d e s i r e d t r a c k n u m b e r a n d p r e s s 7

English

No using for a period of time, please

pul l ou t the plug from the electronic outlet.

The play er should be operated only on condition that the type of power supply corresponds to the marking label. Otherwise,

it doesn t work or even be damaged.

If the player stops playback by accident, please power it on again.

start.

Note:1. No title display in Mp3 CD mode

2. For choose a desired language

to press title key.

Z O O M K E Y or zoom out the video image and to pan though the image. Press Zoom repeatedly to activate the function and choose the required zoom factor: Zoom 1, Zoom 2,

Zoom 3, Zoom 1/2, Zoom 1/3, Zoom,

Zoom Off.

Notes: This feature does not work when the

Disc Menu appears.

Use the Arrow buttons to pan across the screen when the zoom factor is 1,2 or 3 .

R E F E R E N C E :

To protect your DVD player, the interval between two consecutive power button operations must be above 30 seconds.

24

Remote Control Operation English

Chapter 3 Playing WMA, MP3 and JPEG discs

Place a MP3/ JPEG disc into the tray, and the player will auto search the directories saved MP3/JPEG files. After searching, it will auto go to the first directory saved MP3 files (to the disc containing both mp3 and jpeg files; To the disc containing single type of files,it will auto go to the first directory) and play the first song in the directory ( 01: is highlighted).The screen displays as the picture below:

Current

Directory name

Current MP3/JPEG file name. If a JPEG file playing, the name should be

*

.jpg.

The playing file

Is a MP3 music.

The playing file is

A JPEG picture.

File Switch Region: Displays the file type of the playing and

The switching.

Use the Arrow buttons to enter the Directory Region and highlight the desired directory, then the first track under it starts playback; Also you can use the

Arrow buttons to enter the File Region and select the file you want to play.

Notes:

Press the Left and Right arrow buttons, you can activate Directory Region,

File Region and File Switch Region separately.

The highlight in Directory Region and File Region is shown as the picture

25

Playing WMA,MP3and JPEG discs

English above; While it appears a transparent rectangle in File Switch Region.

. In File S w itch Region , you can press the Left and Right arrow buttons to switch the highlight, then press Enter, the M , P ,and G button is illustrated in the above picture. For example, if a disc with Mp3 and Jpeg files but without any NES files is loaded, the color of the letter M and

P will appear to white and G black. If a Mp3 file playing, M turns darker.

To the disc with WMA, MP3 and JPEG files, whcn playing a JPEG picture,

press the Return button to return to JPEG list.

You can press the Numeric buttons to select the file you want to play. For example, if you desire the 15th track in current list, press the 10+ button once, then poress 5 ,the 15th starts playback.

Notes: When playing a disc with Mp3files, video cannot be output while only digital audio can.

When playing JPEG pictures, press the Program button to choose the pictures

Switched mode. There are 17 switch modes; Press Program repeatedly to activate the function and choose the required switch mode: Spread from Up to Down,

Spread from Down to Left, Spread from Left to Right ,Up to Left Down, Spread

Spread from Left Up to Right Down, Spread from Right Up to Left Down, Spread

Left Down to Right Up, Spread from Right Down to Left Up, Spread from Center to Up / Down, Fold from Up / Down to Center, Fold from Left/ Right to Center,

H o r i z o n t a l S h u t t e r , Ve r t i c a l S h u t t e r , F o l d f r o m t h e C o r n e r s t o t h e C e n t e r ,

Random Play, Off

When a picture playing or pausing, press the Arrow buttons to change the display angle:

Up: flip vertical

Down: flip horizontal

Left: rotate 908 counter-clockwise

Right:rotate 908 clockwise

When a picture playing or pausing, press the Menu button, the screen disp lays small pictures. Up to 12 small pictures are displayed per screen. To view the next 12 pictures, press the Next button to go forward and the prev button to go to the previous page. You can also select and play a picture in full screen by press that number on the remote.

26

Installation

Parts List

(The number in the list are keyed to those in the instructions)

1

2

X2

English

3

4

5

6

7

Mounting Example

1

1

182mm

2

53mm

1

Put in the mounting sleeve.

3

Fasten the rear bracket serows and back side harness, and fix the unit well.

Bend these clown outward for a tight fit, if necessary.

6

8

9

7

5

Remooac, insert key into the set then pull the set out trow dash board.

27

Installation

English

DETACHING THE FRONT PANEL

Before detaching the front panel. Be sure to press . Press , then ture the front panel to the level, slide it to the left, and pull it off to wards you.

REPLACING THE FRONT PANEL

Bulgn

Hollow

Dulge

Hollow

First, insert the left side of the front panel into the main unit. Push the right side of the front panel until it looks firmly into the main unit, at one time, insert the right side of the front panel into the main unit.

PRECAUTIONS

Do not touch the contacts on the ront panel or on the unit body, since this may result in poor electrical contact, If dirt or dust get on the contacts, wipe them with s clean, dry cloth.

28

Specification

English

General

Power Requirements

Load Impedance

Max. Power Output

Tone Controls

Dimensions

Mounting Dimensions

Weight

DVD Deck Section

Discs Played

Video System

Mounting Angle

Video Section

Video System

Video Output level

Horizontal Resolution

Audio Section

Maximum Output level

Frequency Response

Signal-to-noise Ratio

Separation

AM Tuner Section

Frequency Range

IF Range

Usable Sensitivity(-20dB)

FM Tuner Section

Tuning Range

IF Range

Usable sensitivity (-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

12V DC

4

45W x 4/65W x 4/100W x 4

8dB(Bass 100Hz, Treble 10KHz)

Approx.192x178x50mm(dxwxh)

Approx.169x182x53mm(dxwxh)

Approx. 1.75kg

DVD,VCD1.0/1.1/2.0/3.0/MP3,CD,CD-R,CD-RW,PICTURE-CD

AUTO/PAL/NTSC

0 TO+/-30

4:3 Letter Box and 4:3 Pan Scan

1.0Vp-p 75 ohms

500

2Vrms(+/-3dB)

20 to 20Khz

85dB

80dB

522-1620(Europe/China/Japan),530-1710(U.S.A)

450KHz

(Optional)

25dB

76-90(Japan)

87.5-108(Europe/china),87.5-107.9(U.S.A)(Optional)

10.7MHz

15dB

60dB

30dB(1KHz)

30~15000Hz

Note: Due to continuous product improvement, specifications and design are subject to change

without notice.

29