WABECO CC-F1200 hs Operating Instructions Manual

Operating instructions
Universal drilling and milling machines
Version of February 2009
F1200 – F1200 high speed
CC-F1200 – CC-F1200 high speed
F1210 – F1210 high speed
CC-F1210 – CC-F1210 high speed
F1410 LF – F1410 LF high speed
CC-F1410 LF – CC-F1410 LF high speed
Walter Blombach GmbH
Tool and Machine Factory
D-42899 Remscheid Am Blaffertsberg 13
D-54673 Neuerburg WABECO Str. 1-10
phone: (02191) 597-0
fax: (02191) 597-40
phone: (06564) 9697-0
fax: (06564) 9697-25
www.wabeco-remscheid.de
E-Mail: [email protected]
E-Mail: [email protected]
Index
EC-Conformity Declaration
5
1.
1.1
1.2
1.3
1.4
1.5
Dimensions
F1200 – F1210
F1200 – F1210 high speed
F1410 with trapezoid thread spindle
F1410 with ball screw
F1410 high speed with ball screw
6
6
7
8
9
10
2.
Delivery and installation
11
3.
Transport lock
12
4.
Start-up and maintenance
13
5.
Safety devices and recommendations
16
6.
Clamping and ejecting tools
18
7.
Assembly and disassembly of collets
20
8.
8.1
8.2
8.3
Speed regulation
Speed regulation for machining aluminium and steel
Speed regulation for 1.4 kW motor
Speed regulation for 2.0 kW motor (high speed)
21
21
21
22
9.
Feed motion X,Y und Z-axis
23
10.
10.1
10.2
Recommendations for application and operation
Swivelling of the milling head
Drill stroke – depth stop
24
25
26
11.
Coolant unit
27
12.
Declaration of noise levels
28
13.
Drawing and list of parts
29
F1200 – F1200 high speed - F1210 – F1210 high speed
13.1
13.3
13.4
13.5
13.7
13.8
13.11
13.18
13.19
13.21
13.22
13.23
13.30
13.31
13.34
13.35
2
Electronics - protective cover with 1.4 kW motor
Protective cover
Milling head for 1.4 kW motor
Milling head high speed with 2.0 kW motor
Z-column with vertical slide and trapezoid thread spindle
Z-column with vertical slide and ball screw
Z-clumn with vertical slide with automatic feed
Z-spindle complete
Lateral drive for Z-spindle complete
Lateral drive for Z-spindle with automatic feed
Cross support with trapezoid thread spindle
Cross support with ball screw
X-spindle
Y-spindle
X-spindle with automatic feed
Y-spindel with automatic feed
29
31
32
34
38
40
46
60
61
64
66
68
77
78
84
86
Index
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
13.2
13.3
13.4
13.6
13.9
13.10
13.19
13.20
13.24
13.32
13.33
13.36
13.37
13.38
Electronics – Protective cover with 1.4 kW motor
Protective cover
Milling head with 1.4 kW motor
Milling head high speed with 2.0 kW motor
Z-column with vertical slide and trapezoid thread spindle
Z-column with vertical slide and ball screw
Lateral drive for Z-spindle complete
Z-spindle with CNC drive complete
Cross support with trapezoid thread spindle
X-spindle
Y-spindle
Control console nccad with 1.4 kW motor
Control console nccad with 2.0 kW motor
Support arm for control console
30
31
32
36
42
44
61
62
70
80
82
88
90
92
F1410 LF– F1410 high speed
13.1
13.3
13.4
13.5
13.12
13.13
13.14
13.15
13.18
13.19
13.25
13.26
13.27
13.30
13.31
13.34
13.35
Electronics – protective cover with 1.4 kW motor
Protective cover
Milling head with 1.4 kW motor
Milling head high speed with 2.0 kW motor
Z-column with trapezoid thread spindle
Vertical slide with trapezoid thread spindle
Z-column with ball screw
Vertical slide with ball screw
Z-spindle complete
Lateral drive for Z-spindle complete
Top slide
Cross slide with trapezoid thread spindle
Cross slide with ball screw
X-spindle
Y-spindle
X-spindle with automatic feed
Y-spindle with automatic feed
29
31
32
34
48
50
52
54
60
61
72
73
74
77
78
84
86
CC-F1410 LF– CC-F1410 high speed
13.2
13.3
13.4
13.6
13.16
13.17
13.19
13.20
13.28
13.29
Electronics – protective cover with 1.4 kW motor
Protective cover
Milling head with 1.4 kW motor
Milling head high speed with 2.0 kW motor
Z-column with ball screw
Vertical slide with ball ball screw
Lateral drive for Z-spindle complete
Z-spindle complete
Top slide
Cross slide
30
31
32
36
56
58
61
62
75
76
3
Index
13.32
13.33
13.36
13.37
13.38
X-spindle
Y-spindle
Control console nccad with 1.4 kW motor
Control console nccad with 2.0 kW motor
Support arm for control console
80
82
88
90
92
14.
14.1
14.2
14.3
14.4
14.5
14.6
Circuit diagram
Motor 1.4 kW
Motor high speed 2,0 kW
nccad with 1.4 kW motor
nccad with 2.0 kW motor
Stepper motor basic version
Stepper motor professional version
93
93
94
95
96
97
98
Dear customer!
Congratulations on choosing the WABECO Universal Drilling and Milling Machine. We have
taken great care in its manufacture and we have given it a thorough quality control test. These
operating instructions are to help you to work with it safely and properly. Therefore we request that
you read the respective instructions carefully and follow them exactly.
After unpacking the machine please check to see if any kind of damage has occurred during
transportation. Any complaints must be made immediately. Complaints made at a later date
cannot be accepted.
If you have any questions or need any spare parts, please quote the machine number
located on the front of the motor (see rating plate).
Disposal of the drilling and milling machine
The transport and protective packaging is made by means of the following materials:
ƒ corrugated cardboard
ƒ polystyrene free of freon
ƒ polyethelene foil
ƒ non-returnable wooded pallet (untreated)
ƒ Euro pallet (deposit)
If you have no further need of these articles or do not wish to use them again, please dispose of
them at the public recycling facilities.
The drilling and milling machine consists up to 98% of recyclable materials, i.e. steel, cast iron,
aluminium and 2% of chemical materials, e.g. the coating of electrical leads, printed circuits.
If you have trouble in disposing of these parts in a proper manner, we would be pleased to help
you: upon mutual agreement we will take the complete machine back and dispose of it.
However, the costs for transporting the machine to our plant must be at your expense.
4
EC – Conformity Declaration
In the name of the manufacturer
Walter Blombach GmbH
Tool and Machine Factory
based in Remscheid and Neuerburg
D-42871 Remscheid
D-54673 Neuerburg
Postfach 12 01 61
WABECO Str. 1-10
Phone: 0049 (2191) 597-0
Phone: 0049 (6564) 9697-0
Fax: 0049 (2191) 597-40
Fax: 0049 (6564) 9697-25
We hereby declare that the universal milling and drilling machines specified below
Universal milling and drilling machine Typ:
F1210 E
F1210E high speed
CC-F1210 E
CC-F1210 E high speed
meet the following regulation requirements for standard series production
-
directive for machines 98/37 EG
low voltage directive 73/23/EWG
EMV directive 89/336/EWG
In order to meet / implement the requirements of the above mentioned directives, the following
applicable and previously published standards have been adhered to:
EN ISO 12100-1
EN ISO 12100-2
EN 12840
EN 60204-1
D-54673 Neuerburg
________________________________
City
Signature
5
1.
Dimensions
1.1
F1200, F 1210 with trapezoid thread spindle or ball screw
6
1.
Dimensions
1.2
F1200, F 1210 high speed with trapezoid thread spindle or ball screw
7
1.
Dimensions
1.3
F1410 with trapezoid thread spindle
8
1.
Dimensions
1.4
F1410 with ball screw
9
1.
Dimensions
1.5
F1410 high speed with ball screw
10
2.
Delivery and installation
The drilling and milling machines are carefully packed in our factory.
Please check the following upon receipt of delivery:
1.
Whether the packaging has been damaged and/or:
2.
Whether the drilling and milling machine shows signs of transport damage or if there
are reasons for complaints. In this case we request your immediate notification. Claims
made at a later date cannot be considered.
The drilling and milling machine must be installed on an appropriate, level and firm base.
This would be, for example:
ƒ a base cabinet such as in our accessories’ programme
ƒ an own work bench as long as it is strong enough to carry the weight of the machine without
warping (see technical data and check with spirit level) and has an even surface
ƒ a steel plate
The drilling and milling machine must be firmly screwed down onto the base. To facilitate this, there
are 10 mm holes in the machine base. Good results and a minimum of vibration during
operation can only be guaranteed if the above mentioned requirements for secure mounting
have been adhered to.
The installation of the machine should take place where there is sufficient lighting, electrical cables
with earthed sockets and 0-conductors are installed adequately near to the machine so that the
mains connection lead is not subject to any tension whatsoever. The mains lead should be such
that, by means of a multiple socket, a coolant or lubrication unit can also be connected.
11
3.
Transport lock
F1410 high speed with ball screw
Transport lock
Attention!
The transport lock must be removed prior to the initial start-up of the machine.
Please proceed as follows:
1. Remove the wooden block below the milling spindle by slightly moving the milling head upward via
the handwheel of the z axis.
2. Remove the snap ring on both sides of the transport lock. Now the lock can be moved easily.
Otherwise, the milling head has to be moved until the wire ropes are tensioned and carry the
weight. Now the transport lock can be pulled out.
12
4.
Start-up and maintenance
After the machine has been professionally installed and securely mounted, it must be connected to
the mains supply.
1. A qualified electrician must connect the supply lead of the drilling and milling machine to the
local power supply.
2. Provide sufficient lubrication coolant for running the coolant unit
(optional).
3.
All functions must be checked.
In order to clamp workpieces a machine vice or clamping screws (suitable for the T grooves) may
be used.
Greasing the milling machine
Every 6-8 weeks the Quill and the feed pinion should be greased (see sketch).
Therefore move the quill up and down while applying some lubricant to the lateral metal-on-metal
contact area of the quill and the feed spindle.
It is not necessary to lubricate the drilling spindle, as the ball bearings are fully enclosed and had
been lubricated during production for the entire service life of the machine.
The milling machines with linear guides are maintenance-free and do not need greasing.
Lubrication means:
- reducing the wear and the frictional resistance
- extending the lifetime
- preventing the metal surfaces from corroding
We recommend:
for lubrication: multi-purpose grease grade 2NLGI
for oiling:
lubrication oil of 100 mm 2/s viscosity
Spindle nuts with trapezoid thread spindle:
The spindle nuts of the milling machines are adjustable.
Should a spindle nut of one of the three axes have some play, proceed as follows:
13
4.
Start-up and maintenance
X-axis:
To adjust the spindle nut, move the cross table to the centre. After loosening the set screw, the
adjusting nut is to be turned a bit in the clockwise direction. Turning the adjusting nut like this
achieves a mutual tightening of the two nuts and as a result play-free running of the threaded
spindle. After the adjustment, the set screw must be re-tightened firmly.
Y-axis:
The readjustment of the Y-axis requires unscrewing the concertina cover of the top slide.
The following procedure is as per instruction for the X-axis.
14
4.
Start-up and maintenance
Z-axis:
To adjust the spindle nut of the Z-axis, you have to unscrew the cover plate.
The further procedure is as for the X-axis.
In the case of spindle nuts with ball screw an adjustment is not necessary and also not
possible.
15
5.
Safety devices and recommendations
In order to make working with our drilling and milling machines safe, we have equipped them with
the following safety devices and thus they are in accordance with the relevant European safety
regulations.
1.
Protective cover
The separating safety device attached to the machine housing, prevents reaching in and
coming into contact with the tool spindle. This safety device is constructed in such a way that it
can be adjusted to the necessary working height (depending on the dimensions of the
workpiece and tool).
2.
Main switch with low voltage release
In order to disconnect the electrical parts of the drilling and milling machine safely from the
mains, we have provided a main switch with low voltage release besides the mains lead with
plug. This undervoltage release prevents the drive motor from coming on after a power cut and
so excludes the danger of the work spindle moving unexpectedly.
3.
Emergency OFF switch
This enables a quick interruption of dangerous movements, in particular of the CNC
equipment.
4.
Overload protection
This device has been developed to protect the drive motor and it must be noted that after the
motor has been turned off (by hand or automatically), because of overloading, a short pause of
1-3 seconds must be observed before turning the machine on again so that the relay of the
electronical parts can re-establish the closed circuit condition.
5. Safety machine cabin
During the CNC operation the door of the safety machine cabin must be closed. On the right upper
side there is a limit switch that is operated by closing the door. This is the only way to move the
feed motors at the axes independently via the controller.
Only with the door closed it is possible that the feed motors at the axes are moved
independently via the CNC-controller. When the door is open, the motors are being switched off
the power supply which enables manual operation. The main spindle can be swichted on either
when the door is closed or opened.
Working in manual mode with the door opened.
When switching from manual operation to CNC mode please proceed as follows:
1.
close the door of the safety machine cabin
2.
turn the flip switch from manual operation to CNC operation
3.
select main spindle rotating direction left or right
4.
set the spindle speed by means of the potentiometer
5.
release the flip switch to move the axes
6.
start the CNC programme
It is forbidden to remove the door limit switch or to put it out of action as this could lead to serious
danger to the machine operator and cause severe accidents.
16
5.
Safety devices and recommendations
We would like to draw your attention to the following safety recommendations which are a
result of a combination of the European standards and our own experience:
1. Workpieces must be secured in such a way that they cannot be propelled out of position by the
torque of the drill or mill.
2. Round workpieces such as corrugated pieces, round turning part or similar things must be fixed
into position by suitable means such as prisms in conjunction with a machine vice when drilling.
3. Machine drills and mills are sharp-edged tools. In order to protect hands, these tools should
only be held by the shaft and not by the cutting edge when being transported or changed.
The cutting edges of the tools are sharp and can cause serious
injury when touched.
4. Throughout the drilling and milling processes, sharp and often hot swarf is produced which is
then thrown off by the momentum of the tool in operation. In order to prevent accidents it is
necessary to wear goggles or a face shield.
5. It is furthermore recommended to wear well-fitting clothes, especially on the arms (nothing
loose) and in the case of long hair, a hair net should be worn to prevent anything being caught
or drawn in by the rotating work spindle or when changing the workpieces.
6. By pulling the mains plug, the drilling and milling machine is disconnected from the electrical
current. This should be observed when
- a drill or mill is changed
- the machine has to be serviced.
7. In order to avoid wear and tear on the tools and the drive motor, it is recommended that the
tools are to be selected with care, worn tools should be exchanged for sharp ones and the feed
should be calculated such that the r.p.m. of the work spindle is only slightly reduced. The depth
of the feed must be selected with precision so that it is not possible to drill into the support
table.
8. We recommend the installation of light which provides a level of at least 500 lux at the point of
tool cutting operations.
9. Appropriate means must be used to dispose of drilling and milling swarf.
10 We strongly recommend that the drill chuck key is be fixed to the machine by means of a clamp
or similar attachments only. This is in order to avoid the drill chuck key being caught by the tool
spindle and being thrown around if it is fixed to the machine with anything flexible like chains or
string.
11. When drilling and milling machines are not in use, we recommend installing a safety device to
prevent children or non authorized people from switching on the machine.
12. The drilling and milling machine should be set up where no humidity, apart from the lubrication
coolant, can affect it.
13. It is necessary to carry out regular checks for damages to parts and/or for the functions, on
drilling and milling machines. Please do not hesitate to call us if you require original spare parts
or advice!
17
6.
Clamping and ejecting tools
Allen key
Tool retaining/forcing
screw
Main spindle
Retaining bolt
Clamping chuck
18
6.
Clamping and ejecting tools
This is the core of the WABECO clamping and ejection system,
the tool retaining/forcing screw. It operates on the principle
of the screw having a fine thread located at its head and a
coarse thread on the shank. Due to this construction, a special
procedure has to be observed when clamping tools with an
internal thread.
It is not possible to insert a tool or tool holder with internal threads into the work spindle
first and to screw the tool retaining/forcing screw into the internal thread afterwards! The
tool or tool holder must be screwed onto the tool retaining/forcing screw.
As you can see on the picture (page 18), for clarification we have cut open the protective cover and
the spindle housing so that the tool retaining screw with the Allen key can be seen.
Please proceed as follows:
With the aid of the Allen key, screw the tool retaining/forcing screw into the work spindle right up to
the end of its thread. Once the screw blocks, turn it back 2-3 revolutions.
Now the tool is inserted by hand from underneath into the taper of the work spindle and screwed
onto the tool retaining/forcing screw. While this is being done, the tool retaining screw is held tight
by means of the Allen key.
Once the tool has been clamped hand-tight, the work spindle is held by means of the holding pin
and the tool retaining screw can be tightened with the Allen key without any effort.
To eject tools with an internal thread, hold the tool spindle tight with the holding pin and loosen
the tool retaining screw with the Allen key.
Now the tool can be screwed off the tool retaining/forcing screw by hand and taken out of the work
spindle taper from underneath.
Tools with flat tang (without internal threads) can be clamped by first of all screwing the tool
retaining screw as far back with the Allen key as is necessary to insert the tool into the work
spindle. After doing this, the tool retaining/forcing screw is screwed lightly onto the tool.
To eject the tool, the holding pin is inserted into the tool spindle and held tight with one hand. By
turning the Allen key to the left, the tool is released and can be easily removed from the work
spindle.
19
7.
Assembly and disassembly of collets
Disassembly
Take the clamping nut in one hand and press it against the collet as you can see it on the
illustration.
The lateral pressure exerted on the collet causes the clamping nut to leap so that can
easily be taken out of the nut.
Assembly
Put the collet on a flat underlay and place the clamping nut on the collet.
Now press the clamping nut down against the collet until it snaps. The collet can move freely in the
centrical chamfer. It will not fall out even if you turn it around.
20
8.
Speed regulation
A specific cutting speed is required when milling different materials (e.g. steel, aluminium etc.)
The r.p.m. of the work spindle can be infinitely varied from 140-3000 min-1 or 100–7500 min-1 on the
potentiometer respectively, so that the appropriate speed for the material, the workpiece and the
diameter of the cutter can be chosen every time.
Please see the table showing the respective r.p.m. values for aluminium and steel as follows:
8.1
Speed regulation for machining aluminium and steel
ALUMINIUM
tool-Ø
8.2
STEEL
r.p.m.
-1
tool-Ø
r.p.m. -1
2 mm
3000
2 mm
2000
4 mm
2900
4 mm
1400
6 mm
2850
6 mm
1200
8 mm
2750
8 mm
850
10 mm
2700
10 mm
700
12 mm
2650
12 mm
590
14 mm
2600
14 mm
500
Speed regulation for 1.4 kW motor
%
r.p.m. -1
1
140
5
140
10
150
15
160
20
200
25
300
30
400
35
700
40
850
45
1000
50
1200
55
1500
60
1900
65
2500
70
2800
80
3000
90
3000
100
3000
21
8.
Speed regulation
8.3
Speed regulation for 2.0 kW motor (high speed)
22
%
r.p.m. -1
2
50
3
100
4
200
5
350
10
700
15
1000
20
1400
25
1700
30
2100
35
2500
40
2900
45
3200
50
3600
55
4050
60
4500
65
4800
70
5200
75
5600
80
6050
85
6500
90
6900
95
7200
100
7500
9.
Feed motion X,Y and Z-axis
The traverse and longitudinal motion of the cross support (X,Y-axis) is accomplished by turning the
handwheels (parts-no. 4 and 12). Both slides can be blocked by means of the clamping levers
(parts-no. 21 and 3).
The feed motion – drilling and milling depth (Z-axis) – is accomplished by using the handwheel
(part-no. 20). To operate the milling head by means of the handwheel, loosen clamp lever (part-no.
18) and fix it again after operation.
The travel path can be read from the scale rings. One graduation mark corresponds to 0.05 mm. A
complete revolution of the handwheel corresponds to a slide path at the
X-axis (scale ring part no. 15) and Y-axis (scale ring part no. 5) of 4 mm, with ball screws 5 mm, at
the Z-axis (scale ring part no. 33) of 2 mm. with ball screws of 2.5 mm.
Another possibility of operating the tool spindle is by turning the operating lever (part no. 29). After
loosening the clamping lever (part-no. 39) the control lever can be turned. One graduation mark on
the collar (part-no. 31) corresponds to 1 mm of travel.
The clamping lever must be well tightened again afterwards. The work spindle has a maximum
travel of 55 mm.
We recommend that the feed range (infeed) should not be selected too generously, but that in the
case of greater infeed depth this should be accomplished in multiple steps.
23
10.
Recommendations for application and operation
We recommend the following:
ƒ the drill should be inserted and clamped with the chuck key in such a way that the drill is
positioned exactly between the three clamping jaws of the toothed ring chuck, the quick action
chuck or the drawing-in attachment of the drill
ƒ mills with a shaft should be clamped by means of a precision draw-in attachment with morse
taper MT2 and tightening thread M10 and the appropriate precision clamping collet in
accordance with DIN (German Industrial Standard)
ƒ mills with a bore hole (all those with a Ø of 16 mm) and a longitudinal groove should be
clamped by means of precision shell end mill with mill retaining screw and feather key, MT2x16,
draw-in tightening thread M10
It is important to observe the following when drilling:
ƒ the appropriate r.p.m. must be set according to the diameter of the drill
ƒ the contact pressure should be such that the drill can still cut with ease
ƒ when the contact pressure is too high it will result in premature wear on the drills, even the
possible snapping of drills or them sticking fast in the bore hole
If a drill sticks fast, switch the motor off immediately, use the
emergency OFF switch.
ƒ
ƒ
ƒ
ƒ
ƒ
when processing hard materials, i.e. steel, normal commercial drilling oil must be used
the spindle must always rotate when the drill is removed from the workpiece
when processing non-metallic materials, i.e. wood and when having to drill right through,
splintering can be prevented by clamping a piece of waste wood under the material to be
processed
when processing veneered or plastic-coated workpieces of wood, always drill from the good
side
when processing thin metal sheeting, a piece of waste wood should always be clamped
underneath
It is important to observe the following when milling:
ƒ choose the appropriate cutting speed:
for materials with normal mechanical strength properties, e.g. steel
18-22m/min
for materials with higher mechanical strength properties
10-14m/min
(see also paragraph 9 - r.p.m. adjustment)
ƒ regulate the contact pressure so that the cutting speed remains constant
ƒ when processing hard materials use normal commercial drilling oil
It is important to observe the following when clamping the workpieces:
ƒ use suitable straining screws or machine vices for the T-slots of the milling machine table
ƒ always remove waste material and swarf from the milling machine table of the cross support in
order to clamp level and accurately
24
10.
Recommendations for application and operation
10.1
Swivelling of the milling head
In order to produce bore holes and chamfering at an angle which diverges from the normal vertical
position of the milling head, the milling head can be swivelled up to 90° either to the right or to the
left.
If an adjustment is intended please proceed as follows:
After loosening (turn to the left) the lock nut (part-no. 7) turn the hexagon nut as far to the right
against the housing of the tool spindle until the index pin (part-no. 4) can be pulled out by hand.
Loosen both the high nut (part-no. 19) and the hexagon nut (part-no. 21) on the vertical slide by
then turning to the left.
Now the milling head can be swivelled to the desired degree to the left or to the right. In order to fix
the milling head in this position, tighten both the high nut and the hexagon nut again.
In order to bring the milling head back to its normal position, loosen the high nut and the hexagon
nut on the vertical slide and bring the vertical slide back to its upright position.
After turning back the hexagon nut on the index pin, the latter can be pushed into the opening in the
work spindle housing by hand. Now, both the hexagon nut and the lock nut of the index pin as well
as the hexagon nut and the high nut on the vertical slide can all be tightened.
25
10.
Recommendations for application and operation
10.2
Drill stroke – depth stop
It is also possible to set the feed
motion of the milling spindle to a
specified measure.
Therefore, the desired depth can be
adjusted by means of the operating
lever (part no. 27,28,29) (depth can
be read from the scale ring part no.
31), and the depth stop part no. 37
is to be turned to the correct
position, so that it hits the milling
head. Then tighten the hexagon bolt
(part no. 36).
26
11.
Coolant unit
The coolant unit consists of:
1. Tray with lubrication coolant sump which collects the lubrication coolant mixture fort he feed pump.
Content:
Coolant unit
13 litres
Safety machine cabin
42 litres
2. Feed pump with the following electrical data:
ƒ nominal voltage 230 V
ƒ frequency 50/60 Hz
ƒ nominal current input 0,4A
ƒ nominal output 0,07 kW
ƒ ON-OFF switch and mains lead with a length of 2 m complete with earthed plug
3. Adjustable, flexible pressure tubing with stop valve and nozzle: for transporting the lubrication
coolant to the processing point.
When using lubrication coolants, especially water based emulsions, a number of health and safety
measures must be observed:
1. use concentrated products free of nitrates
2. use concentrates without secondary amins
3. use products with the lowest possible allergy potential
When mixing a refill of lubrication coolant, please observe the following:
ƒ clean/rinse the circulation system (tray/filter)
ƒ determine the concentration necessary to meet the technical demands
(concentrate: water 1:5 – 1:30)
ƒ check the water has a low level of nitrates (< 50 mg NO 3-, test strip)
A cleaning plan should determine at what intervals the system should be cleaned of swarf and other
waste.
A service plan should determine the following:
ƒ when to check the concentration in use (daily/weekly)
ƒ when to check the pH values (weekly)
ƒ when to check/assess the bacteria count (monthly)
ƒ when to check the nitrate content (weekly)
(The information in brackets can be varied according to the production circumstances)
In order to reduce splashing, we recommend the attachment of a splash guard and/or reducing
amount sprayed from the nozzle.
Since steps to protect the skin must be taken, it is advisable to wear gloves and aprons. The skin
should be cleaned with acidic syndets without abrasive ingredients and rich cream should be
applied to regenerate the skin.
Please also adhere to the enclosed information on the general operating instructions.
27
12.
Declaration of noise levels in accordance with
DIN EN 24871 (German Industrial Standard)
Noise levels while running idle
Acoustic capacity level
Sound pressure level on operator’s ear
78 dB (A)
62 dB (A)
The stated values reflect emission levels and not necessarily working levels. Although there is a
correlation between the level of emission and the level of stress, this cannot be used reliably in
order to determine whether additional safety measures are necessary or not.
Other factors which influence the actual stress level or employees are the characteristics of the
working area, other sources of noise, i.e. the number of machines and other processes going on
nearby etc. Apart from that, the permitted stress levels may vary from country to country.
This information enables the user of the machine to assess the dangers and risks more accurately.
However, in order to state a reference value of noise levels which could manifest itself to the ears of
the operator during processing, the following measurement conditions are given:
Shell end mill 10 mm, cutting depth 3 mm
Spindle r.p.m. 2240 1/min, feed 0,09 mm/revolution, AlCuMgPb-cuboid workpiece
The adjusted sound pressure level is 91 dB (A).
28
13.
Drawing and list of parts
13.1
Electronics – protective cover
for milling machines with 1.4 kW motor
F1200 – F1210 - F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
5.1
6
7
8
9
11
11
12
15
15
1
1
1
4
4
4
1
1
8
2
1
1
1
1
1
11200401
11800005
11200403
11700001
11700002
11700120
11800001
11800004
11700003
11200405
11200411
112004111
11800008
11200415
112004151
Cap
Circuit board
Cover
Countersunk screw
Hexagon nut
Locking washer
ON/OFF switch
Potentiometer
Tapping screw
board rest
Tool draw-in bolt with thread M10 for MT2
Tool draw-in bolt with thread M12 for MT3/SK30
Emergency OFF switch (german)
Allen key 8 mm for MT2
Allen key 10 mm for MT3/SK30
29
13.
Drawing and list of parts
13.2
Electronics – protective cover
for CNC milling machines with 1.4 kW motor
CC-F1200 – CC-F1210 – CC-F1410 LF
30
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
5.1
8
9
11
11
15
15
1
1
1
4
4
4
8
2
1
1
1
1
11200401
11800005
112004031
11700001
11700002
11700120
11700003
11200405
11200411
112004111
11200415
112004151
Cap
Circuit board
Cover
Countersunk screw
Hexagon nut
Locking washer
Tapping screw
Board rest
Tool draw-in bolt with thread M10 for MT2
Tool draw-in bolt with thread M12 for MT3/SK30
Allen key 8 mm for MT2
Allen key 10 mm for MT3/SK30
13.
Drawing and list of parts
13.3
Protective cover for all milling machines
F1200 - F1200 high speed - CC-F1200 - CC-F1200 high speed
F1210 - F1210 high speed - CC-F1210 - CC-F1210 high speed
F1410 LF - F1410 LF high speed - CC-F1410 LF - CC-F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
2.1
3
3.1
3.2
7
1
1
1
1
3
2
1
11270101
11270102
11840004
11270103
11700026
11700038
51007250-0001
Protective cover
Clamping fixture
Clamping lever
Guide rod
Screws
Washer
Brass die
31
13.
Drawing and list of parts
13.4
Milling head for milling machines with 1.4 kW motor
F1200 – F1210 - F1410 LF – CC-F1200 – CC-F1210 - CC-F1410 LF
32
13.
Drawing and list of parts
13.4
Milling head for milling machines with 1.4 kW motor
F1200 – F1210 - F1410 LF – CC-F1200 – CC-F1210 - CC-F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14
14
15
16
17
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
1
1
2
1
1
1
1
1
1
2
1
1
3
1
1
1
1
2
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
11200101
11200102
11810001
11700005
11820001
11200106
11700006
11200108
11700046
11830001
11700027
11700011
11700123
11200114
112001141
112001142
11200115
11810002
11200117
11200119
11200120
11200121
11200122
11700018
11700010
11200125
11200126
11200127
11200128
11840001
11700016
11200131
11700004
11700012
11700121
11700092
11200137
11850001
11840002
Housing
Plastic ring
Ball bearing
Circlip
Drive belt
Belt pulley
Feather key
Bearing flange
Hexagon socket srew
Limpet washer
Circlip
Screw
Hexagon socket screws
Tool spindle MT2
Tool spindle MT3
Tool spindle SK30
Feather wire
Ball bearing
Quill
Nut thin
Nut thick
Feather key
Pinion shaft
Washer
Hexagon socket srew
Spacer sleeve
Motor with pinion Z12
(Wheel) hub
Activating lever
Handle
Spiral clamp pin
Scale ring
Cylinder head screw
Circlip
Hexagon socket screw
Hexagon srew
Depth stop
Spiral spring
Clamping lever
33
13.
Drawing and list of parts
13.5
Milling head for milling machines high speed with 2.0 kW motor
F1200 high speed – F1210 high speed - F1410 LF high speed
34
13.
Drawing and list of parts
13.5
Milling head for milling machines high speed with 2.0 kW motor
F1200 high speed – F1210 high speed - F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
1
1
1
1
1
1
1
1
1
2
6
1
1
3
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
1
11202101
11200102
11700116
11700005
11820002
11820010
11202106
11700006
11200108
11810001
11700060
11700025
11700046
11700123
11200114
112001141
112001142
11200115
11810021
11200117
11810022
11200119
11200120
11200121
11200122
11700018
11700123
11202125
11239
11200127
11200128
11840001
11700016
11200131
11700124
11700012
11700121
11800029
11700092
11200137
11850001
11840002
11700036
11700051
11202143
11202144
11700021
11200416
112004161
11200411
112004111
11800008
11202151
Housing
Plastic ring
Hexagon socket screw
Circlip
Drive belt F1200 high speed - F1210 high speed
Drive belt F1410LF high speed
Belt pulley
Feather key
Bearing flange
Ball bearing
Limpet washer
Circlip
Hexagon socket screw
Hexagon socket screws
Tool spindle MT2
Tool spindle MT3
Tool spindle SK30
Spring wire
Spiral bearing
Quill
Nilos ring (special seal washer)
Nut thin
Nut thick
Feather key
Pinion shaft
Washer
Hexagon socket screw
Flange
Motor high speed
(Wheel) hub
Activating lever
Handle
Spiral pin
Scale ring
Cylinder head screw
Circlip
Hexagon socket screw
Operating cover
Hexagon screw
Depth stop
Spiral spring
Clamping lever
Hexagon socket screw
Flat-headed screw
Thrust washer
Motor belt pulley
Hexagon socket screw
Allen key 8 mm MT2
Allen key 10 mm MT3/SK30
Tool draw-in bolt with thread M10 MT2
Tool draw-in bolt with thread M12 MT3/SK30
Emergency OFF switch
Protective cover
6
7
8
9
10
11
12
13
14
14.1
14.2
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
41
42
43
44
45
48
48.1
49
49.1
50
51
35
13.
Drawing and list of parts
13.6
Milling head for CNC milling machines high speed with 2.0 kW motor
CC-F1200 high speed – CC-F1210 high speed - CC-F1410 LF high speed
36
13.
Drawing and list of parts
13.6
Milling head for CNC milling machines high speed with 2.0 kW Motor
CC-F1200 high speed – CC-F1210 high speed - CC-F1410 LF high speed
Part-No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14.1
14.2
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
37
38
39
41
42
43
44
45
48
48.1
49
49.1
51
Pieces
1
1
1
1
1
1
1
1
1
2
6
1
1
3
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
1
1
1
1
1
Order-No.
11202101
11200102
11700116
11700005
11820002
11820010
11202106
11700006
11200108
11810001
11700060
11700025
11700046
11700123
11200114
112001141
112001142
11200115
11810021
11200117
11810022
11200119
11200120
11200121
11200122
11700018
11700123
11202125
11239
11200127
11200128
11840001
11700016
11200131
11700124
11700012
11700121
11700092
11200137
11850001
11840002
11700036
11700051
11202143
11202144
11700021
11200416
112004161
11200411
112004111
11202151
Designation
Housing
Plastic ring
Hexagon socket screw
Circlip
Drive belt F1200 high speed - F1210 high speed
Drive belt F1410 LF high speed
Belt pulley
Feather key
Bearing flange
Ball bearing
Limpet washer
Circlip
Hexagon socket screw
Hexagon socket screws
Tool spindle MT2
Tool spindle MT3
Tool spindle SK30
Spring wire
Spiral bearing
Quill
Nilos ring ( special seal washer)
Nut thin
Nut thick
Feather key
Pinion shaft
Washer
Hexagon socket screw
Flange
Motor high speed
(Wheel) hub
Activating lever
Handle
Spiral pin
Scale ring
Cylinder head screw
Circlip
Hexagon socket screw
Hexagon screw
Depth stop
Spiral spring
Clamping lever
Hexagon socket screw
Flat-headed screw
Thrust washer
Motor belt pulley
Hexagon socket screw
Allen key 8 mm MT2
Allen key 10 mm MT3/SK30
Tool draw-in bolt with thread M10 MT2
Tool draw-in bolt with thread M12 MT3/SK30
Protective cover
37
13.
Drawing and list of parts
13.7
Z-column with vertical slide for milling machines with trapezoid thread spindle
F1200 – F1200 high speed – F1210 – F1210 high speed
38
13.
Drawing and list of parts
13.7
Z-column with vertical slide for milling machines with trapezoid thread spindle
F1200 – F1200 high speed – F1210 – F1210 high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
1
1
1
1
1
1
3
1
4
3
1
1
1
4
1
1
1
1
1
1
1
1
2
1
12
1
11200301
11200302
11200303
11700017
11700018
11700019
11700020
11700021
11700123
11840004
11200311
11700019
11860001
11700022
11200315
11700124
11200329
11700125
11700028
11700030
11700029
112003261
11200326
11700009
11700038
11200320
11700026
11870001
Column
Adjusting strip
Vertical slide
Index bolt
Washer
Hexagon nut
Lock nut
Hexagon socket screw
Threaded pin
Clamping lever
Thrust piece
Hexagon nut
Concertina cover
Screw
Concertina cover guide
Threaded pin
Washer
Screw
Stud bolt
Hexagon nut
Washer
Counter nut
Nut
Headless pin
Washer
Cover plate
Screw
Alu scale
39
13.
Drawing and list of parts
13.8
Z-column with vertical slide for milling machines with ball screw
F1200 – F1200 high speed – F1210 – F1210 high speed
40
13.
Drawing and list of parts
13.8
Z-column with vertical slide for milling machines with ball screw
F1200 – F1200 high speed – F1210 – F1210 high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
1
1
1
1
1
1
1
2
3
1
4
3
1
1
1
4
1
1
1
1
1
1
1
11200301
11200302
11200303
11700017
11700018
11700019
11700020
11700021
11700123
11840004
11200311
11700019
11860001
11700022
11200315
11700124
11200329
11700125
11700028
11700030
11700029
11245326
25
26
27
28
29
4
2
1
12
1
11700039
11700038
11200320
11700026
11870001
Column
Adjusting strip
Vertical slide
Index bolt
Washer
Hexagon nut
Lock nut
Hexagon socket screw
Headless pin
Clamping lever
Thrust piece
Hexagon nut
Concertina cover
Screw
Concertina cover guide
Headless pin
Washer
Screw
Stud bolt
Hexagon nut
Washer
Nut holder
Spindle nut
(contained in ball screw order no.11245327)
Screw
Washer
Cover plate
Screw
Alu scale
41
13.
Drawing and list of parts
13.9
Z-column with vertical slide for CNC milling machines trapezoid thread spindle
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
42
13.
Drawing and list of parts
13.9
Z-column with vertical slide for CNC milling machines trapezoid thread spindle
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
1
1
1
1
1
1
3
1
4
3
1
1
1
4
1
1
1
1
1
1
1
1
2
1
12
1
11200301
11200302
11200303
11700017
11700018
11700019
11700020
11700021
11700123
11840004
11200311
11700019
11860001
11700022
11200315
11700124
11200329
11700125
11700028
11700030
11700029
112003261
11200326
11700009
11700038
11200320
11700026
11870001
Column
Adjusting strip
Vertical slide
Index bolt
Washer
Hexagon nut
Lock nut
Hexagon socket screw
Headless pin
Clamping lever
Thrust piece
Hexagon nut
Concertina cover
Screw
Concertina cover guide
Headless pin
Washer
Screw
Stud bolt
Hexagon nut
Washer
Counter nut
Nut
Headless pin
Limpet washer
Cover plate
Screw
Alu scale
43
13.
Drawing and list of parts
13.10
Z-column with vertical slide for CNC milling machines with ball screw
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
44
13.
Drawing and list of parts
13.10
Z-column with vertical slide for CNC milling machines with ball screw
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
1
1
1
1
1
1
1
2
3
1
4
3
1
1
1
4
1
1
1
1
1
1
1
11200301
11200302
11200303
11700017
11700018
11700019
11700020
11700021
11700123
11840004
11200311
11700019
11860001
11700022
11200315
11700124
11200329
11700125
11700028
11700030
11700029
11245326
25
26
27
28
29
4
2
1
12
1
11700039
11700038
11200320
11700026
11870001
Column
Adjusting strip
Vertical slide
Index bolt
Washer
Hexagon nut
Lock nut
Hexagon socket screw
Headless pin
Clamping lever
Thrust piece
Hexagon nut
Concertina cover
Screw
Concertina cover guide
Headless pin
Washer
Screw
Stud bolt
Hexagon nut
Limpet washer
Nut holder
Spindle nut
(contained in ball screw order no.11245327)
Screw
Limpet washer
Cover plate
Screw
Alu scale
45
13.
Drawing and list of parts
13.11
Z-column with vertical slide for Milling machines with automatic feed
F1200 – F1200 high speed – F1210 – F1210 high speed
46
13.
Drawing and list of parts
13.11
Z-column with vertical slide for Milling machines with automatic feed
F1200 – F1200 high speed – F1210 – F1210 high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
1
1
1
1
1
1
1
1
3
1
4
3
1
1
1
4
1
1
1
1
1
1
1
1
2
1
12
1
11200301
11200302
11200303
11700017
11700018
11700019
11700020
11700021
11700123
11840004
11200311
11700019
11860001
11700022
11200315
11700124
11200329
11700125
11700028
11700030
11700029
112003261
11200326
11700009
11700038
11200320
11700026
11870001
Column
Adjusting strip
Vertical slide
Index bolt
Limpet washer
Hexagon nut
Lock nut
Hexagon socket screw
Threaded pin
Clamping lever
Thrust piece
Hexagon nut
Concertina cover
Screw
Concertina cover guide
Threaded pin
Washer
Screw
Stud bolt
Hexagon nut
Washer
Counter nut
Nut
Threaded pin
Limpet washer
Cover plate
Screw
Alu scale
47
13.
Drawing and list of parts
13.12
Z-column for milling machines with linear guides with trapezoid thread spindle
F1410 LF
48
13.
Drawing and list of parts
13.12
Z-Column for milling machines with linear guides with trapezoid thread spindle
F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
1
1
1
4
4
2
2
29
2
1
4
1
2
2
4
10
16400301
16400203
11200320
11700033
11700034
11700035
11810023
11700031
11810024
16400224
11700046
16400342
11700125
11700031
11700019
11700026
Z-Column
Base plate
Cover plate
Screw
Spring lock washer
Hexagon nut
Guide rail 460 mm
Screw
Guide rail 580 mm
Spindle extension
Screw
bush
Screw
Screw
Nut
Screw
49
13.
Drawing and list of parts
13.13
Vertical slide for milling machines with Linear guides with trapezoid thread spindle
F1410 LF
50
13.
Drawing and list of parts
13.13
Vertical slide for milling machines with linear guides with trapezoid thread spindle
F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
4
5
6
7
8
9
10
11
12
13
18
19
20
21
23
24
25
26
1
1
1
1
4
16
1
10
2
1
1
4
1
1
1
1
4
2
2
1
11860003
16400302
11860003
16400303
11810026
11700031
16410208
11700026
11700002
16400311
16400312
11700070
11840004
16400319
16400320
16410206
11700026
11700052
16410207
11870001
Concertina cover Z-axis, top
Jam
Concertina cover Z-axis, bottom
Vertical slide
Guide carriage
Cylinder screw
Holding plate Z-axis, top
Cylinder screw
Hexagon nut
Spindle nut
Adjusting nut
Cylinder screw
Clamping lever
Clamping plate
Jam
Cover plate
Cylinder screw
Cylinder screw
Cover plate
Alu scale
51
13.
Drawing and list of parts
13.14
Z-column for milling machines with linear guides with ball screw
F1410 LF
52
13.
Drawing and list of parts
13.14
Z-column for milling machines with linear guides with ball screw
F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
4
4
2
2
29
2
1
4
1
2
2
4
2
10
16400301
16400203
16400347
11700033
11700034
11700035
11810023
11700031
11810024
16400224
11700046
16400342
11700125
11700031
11700019
16400332
11700026
Z column
Base plate
Protective cover z-axis
Screw
Spring lock washer
Hexagon nut
Guide rail 460 mm
Screw
Guide rail 580 mm
Spindle extension
Screw
Bush
Screw
Screw
Nut
Guide rails counter weight
Screw
53
13.
Drawing and list of parts
13.15
Vertical slide for milling machines with linear guides with ball screw
F1410 LF
54
13.
Drawing and list of parts
13.15
Vertical slide for milling machines with linear guides with ball screw
F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
3.1
3.2
3.3
3.4
4
5
6
7
8
9
10
11
12
14
15
16
17
18
19
20
21
22
23
25
26
1
1
1
1
1
1
2
1
4
16
1
4
2
1
1
2
1
4
6
1
4
4
4
4
4
4
4
11860003
11860003
16400302
16400319
11840004
16400320
11700026
16400303
11810026
11700031
16410208
11700026
11700002
16400337/01
16400337/02
16400341
16400340
11700089
11700026
14610206
11700031
11700018
11700019
16400339
16400338
11810027
11700070
27
28
29
2
2
1
11700052
14610207
11870001
Concertina cover Z-axis, top
Concertina cover Z-axis,base
Jam
Clamping plate
Clamping lever
Jam
Cylinder screw
Vertical slide
Guide carriage
Cylinder screw
Holding plate Z-axis, top
Cylinder screw
Hexagon nut
Roller holder left
Roller holder right
Wire rope
Counter weight
Threaded pin
Cylinder screw
Cover plate
Cylinder screw
Limpet washer
Hexagon nut
Redirecting roller
Bolt
Needle bearing
Cylinder screw
Spindle nut
(contained in ball screw order no.11245327)
Cylinder screw
Cover plate
Alu scale
55
13.
Drawing and list of parts
13.16
Z-column for CNC milling machines with linear guides with ball screw
CC-F1410 LF
56
13.
Drawing and list of parts
13.16
Z-column for CNC milling machines mit linear guides with ball screw
CC-F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
25
26
27
1
1
1
4
4
2
2
29
2
1
4
1
2
4
2
10
4
1
1
1
3
4
3
9
3
3
16400301
16400203
16400347
11700033
11700034
11700035
11810023
11700031
11810024
16400224
11700046
16400342
11700125
11700019
16400332
11700026
11900017
16410205
16410204
16400206
16400211
16400205
16400212
11700002
11700038
11700031
Z-column
Base plate
Protective cover Z-axis
Screw
Spring lock washer
Hexagon nut
Guide rail 460 mm
Screw
Guide rail 580 mm
Spindle extension
Screw
Liner
Screw
Nut
Guide rail counter weight
Screw
Limit switch
Limit switch cover Z-axis
Limit switch cover Y-axis
Rubber plate
Distance piece limit switch
Limit switch holder
Distance piece limit switch
Nut
Limpet washer
Screw
57
13.
Drawing and list of parts
13.17
Vertical slide for CNC milling machines with linear guides with ball screw
CC-F1410 LF
58
13.
Drawing and list of parts
13.17
Vertical slide for CNC milling machines with linear guides with ball screw
CC-F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
3
3.1
4
5
6
7
8
9
10
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
1
2
2
1
1
4
16
1
4
2
1
1
2
4
1
4
1
4
1
4
4
4
4
4
4
4
1
11860003
16400227
11700112
11860003
16400303
11810026
11700031
16410208
11700026
11700002
16400337/01
16400337/02
16400341
11700089
16400330
11700089
16410209
11700026
16410206
11700031
11700018
11700019
16400339
16400338
11810027
11700070
33
1
11870001
Concertina cover Z-axis, top
Switch cam
Hexagon cylinder screw
Concertina cover Z-axis, base
Vertical slide
Guide carriage
Cylinder screw
Holding plate Z-axis, top
Cylinder screw
Hexagon nut
Roller holder left
Roller holder right
Wire rope
Threaded pin
Counter weight
Threaded pin
Switch cam support plate
Cylinder screw
Cover plate
Cylinder screw
Washer
Hexagon nut
Redirecting roller
Bolt
Needle bearing
Cylinder screw
Spindle nut
(is contained in ball screw order no.11245327)
Alu scale
59
13.
Drawing and list of parts
13.18
Z-spindle complete for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
1
11200327
1
11245327
1
1
2
1
3
2
1
1
112003226
11700027
11810007
112003224
11700031
112003222
11810025
11200325
Spindle
for milling machines with trapezoid thread spindle
Spindle with Spindle nut
for milling machines with ball screw
Bevel gear
Spiral pin
Ball bearing
Spindle flange
Screw
Adjusting nut
O-ring
Cover
2
3
4
5
6
7
8
9
60
13.
Drawing and list of parts
13.19
Lateral drive for Z-spindle complete for milling machines
F1200 – F1200 high speed – CC-F1200 – CC-F1200 high speed
F1210 – F1210 high speed – CC-F1210 – CC-F1210 high speed
F1410 LF – F1410 LF high speed – CC-F1410 LF - CC-F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
1
112003187
1
112453187
2
3
4
5
6
7
1
1
2
1
2
1
1
112003183
1120031810
11810003
112003186
112003184
11840005
11840003
8
9
10
11
12
13
14
1
1
3
3
2
1
1
11810004
11850002
11700031
11700018
11700087
11700023
112003182
Scale ring (40 graduation marks)
for milling machines with trapezoid thread spindle
Graduated collar (50 graduation marks)
for milling machines with ball screw
Spindle
Adjusting ring
Ball bearing
Spindle flange
Adjusting nut
Handwheel
Hinged handwheel
for CNC milling machines
Ball
Spring
Screw
Limpet washer
Threaded pin
Spiral pin
Bevel gear
61
13.
Drawing and list of parts
13.20
Z-spindle with CNC drive complete for milling machines
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
62
13.
Drawing and list of parts
13.20
Z-spindle with CNC drive complete for milling machines
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
1
11200327
1
11245327
2
3
4
5
6
7
8
9
10
1
1
2
1
3
2
1
1
1
112003226
11700027
11810007
112003224
11700031
112003222
112103192
112103193
1121031917
11
1
1
2
1
1
1
4
4
2
1
1
2
4
4
11800003
11800028
11700046
11820003
112103196
11700009
112103195
11700047
11700048
11700049
1121021213
1121021212
11700050
11700026
Spindle
for milling machines with trapezoid thread spindle
Spindle with spindle nut
for milling machines with ball screw
Bevel gear
Spiral pin
Ball bearing
Spindle flange
Screw
Adjusting nut
Motor support
Jam motor holder
Protective cover (not required for linear guide machine with
ball screw)
Stepper motor nccad basic
Stepper motor nccad professional
Screw
Belt
Toothed belt pulley
Threaded pin
Distance piece
Truss head bolt
Lock ring
Spiral pin
Belt pulley
Flanged wheel
Nut
Screw
12
13
14
15
16
17
18
19
20
21
22
23
63
13.
Drawing and list of parts
13.21
Lateral drive for Z-spindle with automatic feed complete for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
64
13.
Drawing and list of parts
13.21
Lateral drive for Z-spindle with automatic feed complete for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
Part-No.
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Pieces
1
Order-No.
112003187
1
112453187
1
2
1
2
1
1
1
3
3
2
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
2
3
1
1
3
3
4
4
1
1
11204101
11810003
112043186
112003184
11840003
11810004
11850002
11700031
11700018
11700087
11700023
112003182
11204104
11700087
11204106
11204105
11810027
11700042
11700043
11204108
11204109
11700130
11204110
11204112
11204113
11700046
11204111
11800002
11204116
11700018
11700020
11700038
11700026
11204114
11820003
Designation
Scale ring (40 graduation marks)
for milling machines with trapezoid thread spindle
Graduated collar (50 graduation marks)
for milling machines with ball screw
Threaded spindle
Ball bearing
Spindle flange
Adjusting nut
Hinged handwheel
Ball
Spring
Screw
Washer
Threaded pin
Spiral pin
Bevel gear
Thrust washer
Threaded pin
Belt pulley
Flanged wheel
Needle bearing
Circlip
Feather key
Coupling
Connecting washer
Flat-headed screw
Handwheel extension
Motor support plate
Jam motor holder
Screw
Stud bolt
Motor
Protective cover
Washer
Nut
Washer
Screw
Belt pulley
Toothed belt
65
13.
Drawing and list of parts
13.22
Cross support for milling machines with trapezoid thread spindle
F1200 – F1200 high speed – F1210 – F1210 high speed
66
13.
Drawing and list of parts
13.22
Cross support for milling machines with trapezoid thread spindle
F1200 – F1200 high speed – F1210 – F1210 high speed
Part-No.
Piece
s
Order-No.
Designation
1
1
2
3
4
5
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1
1
1
1
1
1
1
1
1
1
2
2
2
4
1
1
4
7
7
4
1
1
1
1
1
11200201
11400201
Top slide F1200 – F1200 high speed
Top slide F1210 – F1210 high speed
Cross slide
Base plate
Adjusting strip
Adjusting strip F1200 – F1200 high speed
Adjusting strip F1210 – F1210 high speed
Concertina cover
Spindle nut with adjusting nut
Spindle nut with adjusting nut
Threaded pin
Flat-headed screw
Alu angle
Screw
Lock nut
Clamping lever
Thrust piece
Threaded pin
Nut
Thrust piece
Clamping piece
Stud bolt
Washer
Spring
Clamping lever
11200202
11200203
11200204
11200205
11400205
11860002
11200208
11200209
11700009
11700126
11200228
11700026
11700020
11840004
11200216
11700123
11700019
11200217
11200219
11700032
11700018
11850003
11840006
67
13.
Drawing and list of parts
13.23
Cross support for milling machines with ball screw
F1200 – F1200 high speed – F1210 – F1210 high speed
68
13.
Drawing and list of parts
13.23
Cross support for Milling machines with ball screw
F1200 – F1200 high speed – F1210 – F1210 high speed
Part-No.
Piece
s
Order-No.
Designation
1
1
2
3
4
5
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1
1
1
1
1
1
1
1
1
1
8
4
2
4
1
1
4
7
7
4
1
1
1
1
1
11200201
11400201
Top slide F1200 – F1200 high speed
Top slide F1210 – F1210 high speed
Cross slide
Base plate
Adjusting strip
Adjusting strip F1200 – F1200 high speed
Adjusting strip F1210 – F1210 high speed
Concertina cover
Nut holder A-axis
Nut holder Y-axis
Screw
Screw
Alu angle
Screw
Lock nut
Clamping lever
Thrust piece
Threaded pin
Nut
Thrust piece
Clamping piece
Stud bolt
Washer
Spring
Clamping lever
11245202
11200203
11200204
11200205
11400205
11860002
11245208
11245209
11700039
11700040
11200228
11700026
11700020
11840004
11200216
11700123
11700019
11200217
11200219
11700032
11700018
11850003
11840006
69
13.
Drawing and list of parts
13.24
Cross support for CNC milling machines with trapezoid thread spindle
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
70
13.
Drawing and list of parts
13.24
Cross support for CNC milling machines with trapezoid thread spindle
CC-F1200 – CC-F1200 high speed – CC-F1210 – CC-F1210 high speed
Part-No. Piece
s
Order-No.
Designation
1
1
2
3
4
5
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
11200201
11400201
Top slide F1200 – F1200 high speed
Top slide F1210 – F1210 high speed
Cross slide
Base plate
Adjusting strip
Adjusting strip F1200 – F1200 high speed
Adjusting strip F1210 – F1210 high speed
Concertina cover
Spindle nut with adjusting nut
Spindle nut with adjusting nut
Threaded pin
Flat-headed screw
Alu angle
Screw
Lock nut
Clamping lever
Thrust piece
Headless pin
Nut
Thrust piece
Clamping piece
Stud bolt
Washer
Spring
Clamping lever
1
1
1
1
1
1
1
1
1
1
2
2
2
4
1
1
4
7
7
4
1
1
1
1
1
11200202
11200203
11200204
11200205
11400205
11860002
11200208
11200209
11700009
11700126
11200228
11700026
11700020
11840004
11200216
11700123
11700019
11200217
11200219
11700032
11700018
11850003
11840006
71
13.
Drawing and list of parts
13.25
Top slide for milling machines with linear guides
F1410 LF
72
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
1
2
26
1
2
1
2
16400201
11810028
11700031
16400212
11700046
16410210
11700022
Top slide
Guide rail 700 mm
Cylinder screw
Spindle extension X-axis
Cylinder screw
Connecting plate
Cylinder screw
13.
Drawing and list of parts
13.26
Cross slide for milling machines with linear guides and trapezoid thread spindle
F1410 LF
Part-No.
Pieces
Order-No.
Designation
1
2
3
5
6
7
8
8.1
9
10
10.1
11
13
14
15
16
17
18
19
20
21
22
1
1
1
1
8
32
1
1
8
1
1
2
8
1
2
1
2
1
1
2
1
1
11860004
11860004
11810029
16400202
11810026
11700031
16400208
16400311
11700070
16400209
16400312
11700087
11700070
16410212
11700002
16410213
11700052
16400302
16400319
11700026
11840006
16400320
Concertina cover, rear
Concertina cover, front
Jam complete
Cross slide
Guide carriage
Cylinder screw
Nut
Nut
Cylinder screw
Adjusting nut
Adjusting nut
Threaded pin
Cylinder screw
Holding plate
Hexagon nut
Holding plate
Cylinder screw
Jam housing
Jam plate
Cylinder screw
Clamping lever
Jam
73
13.
Drawing and list of parts
13.27
Cross slide for milling machines with linear guides and ball screw
F1410 LF
74
Part-No.
Pieces
Order-No.
Designation
1
2
3
5
6
7
8
9
13
14
15
16
17
18
19
20
21
22
1
1
1
1
8
32
2
8
8
1
2
1
2
1
1
2
1
1
11860004
11860004
11810029
16400202
11810026
11700031
Concertina cover, rear
Concertina cover, front
Jam complete
Cross slide
Guide carriage
Cylinder screw
Spindle nut (is contained in ball screw)
Cylinder screw
Cylinder screw
Holding plate
Hexagon nut
Holding plate
Cylinder screw
Clamper housing
Jam plate
Cylinder screw
Clamping lever
Jam
11700070
11700070
16410212
11700002
16410213
11700052
16400302
16400319
11700026
11840006
16400320
13.
Drawing and list of parts
13.28
Top slide for CNC milling machines with linear guides
CC-F1410 LF
Part-No.
1
2
3
4
5
6
7
8
9
10
11
12
Pieces
Order-No.
Designation
1
2
26
1
2
1
2
2
4
1
4
1
16400201
11810028
11700031
16400212
11700046
16410210
11700022
11900017
16400211
16410211
11700002
16400215
Top slide
Guide rails 700 mm
Hexagon cylinder screw
Spindle bearing extension
Hexagon cylinder screw
Connecting plate
Hexagon cylinder screw
Limit switch
Distance piece
Cover limiting switch
Hexagon nut
Tube X-axis
75
13.
Drawing and list of parts
13.29
Cross slide for CNC milling machines with linear guides
CC-F1410 LF
76
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
8
9
10
11
12
13
14
16
17
1
1
4
1
8
32
12
1
2
1
1
1
1
2
2
11860004
11860004
16400227
16400202
11810026
11700031
11700070
16410212
11700002
16410213
16410214
16410215
16410216
11700026
18
8
11700070
Concertina cover
Concertina cover
Switch cams
Cross slide
Guide carriage
Cylinder screw
Cylinder screw
Holding plate Y-axis
Hexagon nut
Holding plate
Switch cam support plate X-axis
Switch cam support plate Y-axis
Linear guide cover
Cylinder screw
Spindle nut
(is contained in ball screw no.16400216)
Cylinder screw
13.
Drawing and list of parts
13.30
X-spindle for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
1
2
1
1
1
1
112002103
11810007
112002105
11850002
11810004
112002104
1
112452104
7
1
11840005
Spindle bearing
Ball bearing
Adjusting ring
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Scale ring (100 graduation marks)
for milling machines with ball screw
Handwheel
8
1
1
1
11200206
11400206
16401206
Milling machines with trapezoid thread spindle
Spindle F1200 – F1200 high speed
Spindle F1210 – F1210 high speed
Spindle F1410LF – F1410 LF high speed
1
1
1
11245206
11445206
16400216
Milling machines with ball screw
Spindle with Spindle nut F1200 – F1200 high speed
Spindle with Spindle nut F1210 – F1210 high speed
Spindle with Spindle nut F1410LF – F1410 LF high speed
3
2
2
11700087
11700018
11700031
Threaded pin
Washer
Screw
9
10
11
77
13.
Drawing and list of parts
13.31
Y-spindle for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
78
13.
Drawing and list of parts
13.31
Y-spindle for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed – F1410 LF – F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
1
2
1
1
1
1
112002103
11810007
112002105
11850002
11810004
112002104
1
112452104
7
1
11840005
Spindle bearing
Ball bearing
Adjusting ring
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Scale ring (100 graduation marks)
for milling machines with ball screw
Handwheel
8
8
1
1
1
1
11200207
11200207
16400207
16400207
milling machines with trapezoid thread spindle
Spindle F1200 – F1200 high speed
Spindle F1210 – F1210 high speed
Spindle for transversal extension
Spindle F1410LF – F1410 LF high speed
1
1
1
1
11245207
11245207
11235207
16400209
milling machines with ball screw
Spindle with Spindle nut F1200 – F1200 high speed
Spindle with Spindle nut F1210 – F1210 high speed
Spindle with Spindle nut for transversal extension
Spindle with Spindle nut F1410LF – F1410 LF high speed
3
2
2
11700087
11700018
11700031
Threaded pin
Washer
Screw
9
10
11
79
13.
Drawing and list of parts
13.32
X-spindle for CNC milling machines
CC-F1200 – CC-F1200 high speed
CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
80
13.
Drawing and list of parts
13.32
X-spindle for CNC milling machines
CC-F1200 – CC-F1200 high speed
CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
4
5
6
1
2
1
1
1
112002103
11810007
11850002
11810004
112002104
1
112452104
7
1
11840003
Spindle bearing
Ball bearing
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Scale ring (100 graduation marks)
for milling machines with ball screw
Hinged handwheel
8
1
1
1
11200206
11400206
16401206
milling machines with trapezoid thread spindle
Spindle F1200 – F1200 high speed
Spindle F1210 – F1210 high speed
Spindle F1410LF – F1410 LF high speed
1
1
1
11245206
11445206
16400216
milling machines with ball screw
Spindle with Spindle nut F1200 – F1200 high speed
Spindle with Spindle nut F1210 – F1210 high speed
Spindle with Spindle nut F1410LF – F1410 LF high speed
3
2
2
1
1
1
2
2
1
2
1
1
1
2
4
4
4
1
4
1
11700087
11700018
11700031
11800003
11800028
1121021213
1121021212
11700048
11700049
112003222
112102126
112102122
112102123
11700115
112103195
11700047
11700050
1121021217
11700026
11820003
Threaded pin
Washer
Screw
Stepper motor nccad basic
Stepper motor nccad professional
Belt pulley
Flanged wheel
Lock ring
Spiral pin
Adjusting nut
Toothed belt pulley
Motor support
Jam for motor support
Screw
Distance sleeve Stepper motor
Round-head screw
Nut
Protective cover Stepper motor
Screw
Belt
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
81
13.
Drawing and list of parts
13.33
Y-spindle for CNC milling machines
CC-F1200 – CC-F1200 high speed
CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
82
13.
Drawing and list of parts
13.33
Y-spindle for CNC milling machines
CC-F1200 – CC-F1200 high speed
CC-F1210 – CC-F1210 high speed
CC-F1410 LF – CC-F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
4
5
6
1
2
1
1
1
112002103
11810007
11850002
11810004
112002104
1
112452104
1
11840003
Spindle bearing
Ball bearing
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Scale ring (100 graduation marks)
for milling machines with ball screw
Hinged handwheel
7
8
8
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
1
1
1
1
11200207
11200207
16400207
16400207
milling machines with trapezoid thread spindle
Spindle F1200 – F1200 high speed
Spindle F1210 – F1210 high speed
Spindle for transversal extension
Spindle F1410LF – F1410 LF high speed
1
1
1
1
11245207
11245207
11235207
16400209
milling machines with ball screw
Spindle with Spindle nut F1200 – F1200 high speed
Spindle with Spindle nut F1210 – F1210 high speed
Spindle with Spindle nut for transversal extension
Spindle with Spindle nut F1410LF – F1410 LF high speed
3
2
2
1
1
1
2
2
1
2
1
1
1
2
4
4
4
1
4
1
11700087
11700018
11700031
11800003
11800028
1121021213
1121021212
11700048
11700049
112003222
112102126
112102122
112102123
11700115
112103195
11700047
11700050
1121021217
11700026
11820003
Threaded pin
Washer
Screw
Stepper motor nccad basic
Stepper motor nccad professional
Belt pulley
Flanged wheel
Lock ring
Spiral pin
Adjusting nut
Toothed belt pulley
Motor support
Jam for motor support
Screw
Distance sleeve stepper motor
Round-head screw
Nut
Protective cover Stepper motor
Screw
Belt
83
13.
Drawing and list of parts
13.34
X-spindle for automatic feed for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed– F1410 LF – F1410 LF high speed
84
13.
Drawing and list of parts
13.34
X-spindle for automatic feed for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed– F1410 LF – F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
4
5
6
1
2
1
1
1
112002103
11810007
11850002
11810004
112002104
7
8
1
1
1
1
1
2
2
2
1
1
1
2
2
1
1
1
1
1
1
1
1
2
3
1
1
3
3
4
4
1
1
11840003
11204002
11404002
16404002
11700087
11700018
11700031
11204103
11204104
11700087
11204106
11204105
11810027
11700042
11700043
11204108
11204109
17000130
11204110
11204112
11204113
11700046
11204111
11800002
11204116
11700018
11700020
11700038
11700026
11204114
11820003
Spindle bearing
Ball bearing
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Hinged handwheel
Threaded spindle F1200 – F1200 high speed
Threaded spindle F1210 – F1210 high speed
Threaded spindle F1410 – F1410 high speed
Threaded pin
Washer
Screw
Adjusting nut
Thrust washer
Threaded pin
Belt pulley
Flanged wheel
Needle bearing
Lock ring
Feather key
Coupling
Connecting washer
Flat-headed screw
Handwheel extension
Motor support plate
Jam motor holder
Screw
Stud bolt
Motor
Protective cover
Washer
Nut
Washer
Screw
Belt pulley
Belt
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
85
13.
Drawing and list of parts
13.35
Y-spindle for automatic feed for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed– F1410 LF – F1410 LF high speed
86
13.
Drawing and list of parts
13.35
Y-spindle for automatic feed for milling machines
F1200 – F1200 high speed – F1210 – F1210 high speed– F1410 LF – F1410 LF high speed
Part-No.
Pieces
Order-No.
Designation
1
2
4
5
6
1
2
1
1
1
112002103
11810007
11850002
11810004
112002104
7
8
8
1
1
1
1
1
2
2
2
1
1
1
2
2
1
1
1
1
1
1
1
1
2
3
1
1
3
3
4
4
1
1
11840003
11204001
11204001
16404001
11700087
11700018
11700031
11204103
11204104
11700087
11204106
11204105
11810027
11700042
11700043
11204108
11204109
17000130
11204110
11204112
11204113
11700046
11204111
11800002
11204116
11700018
11700020
11700038
11700026
11204114
11820003
Spindle bearing
Ball bearing
Spring
Ball
Scale ring (80 graduation marks)
for milling machines with trapezoid thread spindle
Hinged handwheel
Threaded spindle F1200 – F1200 high
Threaded spindle F1210 – F1210 high speed
Threaded spindle F1410 – F1410 high speed
Threaded pin
Washer
Screw
Adjusting nut
Thrust washer
Threaded pin
Belt pulley
Flanged wheel
Needle bearing
Lock ring
Feather key
Coupling
Connecting washer
Flat-headed screw
Handwheel extension
Motor support plate
Jam motor holder
Screw
Stud bolt
Motor
Protective cover
Washer
Nut
Washer
Screw
Belt pulley
Belt
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
87
13.
Drawing and list of parts
13.36
Control console nccad with 1.4 kW motor
88
13.
Drawing and list of parts
13.36
Control console nccad with 1.4 kW motor
Part-No.
Pieces
1
1
1
1
1
1
1
1
1
1
1
1
1
16
2
3
4
5
6
7
8
9
10
11
12
Order-No.
Designation
11800008
11800004
11800001
11800021
11800023
11800005
11800030
11200504
11200509
11200513
11700003
Control package nccad basic
Control package nccad professional
Emergency OFF switch
Potentiometer
ON/OFF switch
Toggle switch
Toggle switch
Circuit board
Interference filter
Controller housing
Cap, top
Switch cover
Tapping screw
89
13.
Drawing and list of parts
13.37
Control console nccad with 2.0 kW motor
90
13.
Drawing and list of parts
13.37
Control console nccad with 2.0 kW motor
Part-No.
Pieces
Order-No.
Designation
1
1
1
1
1
1
2
1
1
1
1
16
11800031
11800032
11800008
11800026
11800021
11800023
11800030
11200504
11200509
11200511
11700003
Control package Milling basic
Control package Milling professional
Emergency OFF switch
Potentiometer
Toggle switch
Toggle switch
Interference filter
Controller housing
Cap, top
Switch cover
Tapping screw
2
3
5
6
8
9
10
11
12
91
13.
Drawing and list of parts
13.38
Support arm for control console
92
Part-No.
Pieces
Order-No.
Designation
1
2
3
4
5
6
7
1
1
4
2
1
2
4
16400501
16400502
16400503
11840004
16400500
16400504
11700079
Arm support
Arm support
Spacer
Clamping lever
Console arm
Ring stop
Threaded pin
14.
Circuit diagram
14.1
Motor 1.4 kW
This document shows all units of the electrical equipment
including the mains connection
mains plug
emergency OFF switch
main switch
11
2
1
L
21
A2
12(k)
1
N
22(i)
2
potentiometer
1
2
3
4
5
1.1 2.2/2.13.2/3.1
date
danger
motor
control electronics
93
14.
Circuit diagram
14.2
High speed motor 2.0 kW
This document shows all units of the electrical equipment
including the mains connection
94
14.
Circuit diagram
14.3
nccad with 1.4 kW motor
This document shows all units of the electrical equipment including the mains connection
95
14.
Circuit diagram
14.4
nccad with 2.0 kW motor
This document shows all units of the electrical equipment
including the mains connection
96
14.
Circuit diagram
14.5
Stepper motor basic version
This document shows all units of the electrical equipment
including the mains connection
97
14.
Circuit diagram
14.6
Stepper motor professional version
This document shows all units of the electrical e
including the mains connection
98