ID200 Series Imprinter Operating Instructions

ID200 Series Imprinter Operating Instructions
Operating
Instructions
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
ID200 Series
Imprinter
Table of Contents
Imprinter Operating Instructions
Changing Character Dial Instructions
Line and Letter Charts
1/16”
3/32”
1/8”
3/16”
1/4"
Assembly Drawings
Page
2-3
4
5-9
5
6
7
8
9
10-11
Repair Parts List
12
Trouble Shooting
Kits
13
14
WWW.CABLEJOINTS.CO.UK
www.BAND-IT-IDEX.com
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
Page
1 of 14
WWW.THORNEANDDERRICK.CO.UK
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Operating
Instructions
Tag Anvils
Handle
Depth Adjustment
¾ x 3.5
Mounting Plate
1.5 x 2.5
¾x2
Knurled Nut
Tag & Anvil
Location
Dial Wheel
Setup
Edge
Capstan Screw
Line Indicator
Table Limit
Screw Location
Ram
Letter Indicator
Table
Drum Gear
Spacing Rack
Escapement
Wheel
Table Anvil
Letter Pointer
Spacer Button
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Table (bottom view)
Spacing Screw
www.BAND-IT-IDEX.com
Page 2 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Operating
Instructions
The I.D Tag Imprinter
The imprinter is an easy-to-use machine for stamping data neatly and uniformly on I.D tags.
Familiarize yourself by imprinting some practice pieces. With the 3/32" letter size dial, the large 1 1/2
x 2 1/2 I.D tag can hold as many as 91 characters on 7 lines, plus 30 more using all the space
available (see line and letter charts provided in this manual). The small 3/4 x 2" I.D tags will hold 39
characters on 3 lines.
How To Operate Imprinter
Note:
Imprinter is assembled with large anvil already in place. When it becomes necessary to exchange
anvils (to print on small tags) be sure that the word "bottom" is faced down on table.
Loosen mounting plate knurled nut. Slide mounting plate to the front and place large I.D tag on top of
anvil. Move tag hold-down slides to the inside.
Align the right front edge of the mounting plate with the #1 line of the line indicator and the pointer of
the letter indicator with the letter "D".
Spin the character dial to select the desired letter or number to imprint.
Impression depth has been preset at the factory. If deeper impression is desired, turn depth
adjustment screw located on top of imprinter counter clockwise.
Actuate operating handle firmly for character impression in I.D tag. Table will index automatically to
the next character space.
Caution: Forcing the operating handle may cause damage to the machine.
Use the letter and line charts on pages 5-9 for line and character position.
Refer to website for warranty information: http://www.band-it-idex.com/warranty.html
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 3 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Character Dial
Instructions
Remove screw in center of dial and take dial and knob assembly off. Place new dial and knob in
position and tighten with retaining screw. Replace line and letter indicator with corresponding parts
from kit. Slide table to extreme right and remove table limit screw.
Caution: Table is under tension when pushed all the way to the right.
To safely return table to the left, hold table to the right and push spacer button to allow table to move
slowly to the left and expose spacing mechanism. Remove escapement wheel screw, dial washer
and escapement wheel and replace with parts from kit. Move table all the way to the right and
reassemble table limit screw. To return table to imprinting position, reset line and letter indicator to
line and letter chart provided with kit.
Dial Kits:
Dial kits come complete with dial
wheel, escapement wheel, dial washer
line spacing indicator with decal and
a letter spacing indicator with decal.
Catalog Number
Dial Wheel
Description
ID2816
1/16” Letter Dial Kit
ID2906
3/32” Letter Dial Kit
ID2826
1/8” Letter Dial Kit
ID2836
3/16” Letter Dial Kit
ID2846
1/4” Letter Dial Kit
Dial Washer
Escapement Wheel
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 4 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
1/16” Line and
Letter Position Chart
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 5 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
3/32” Line and
Letter Position Chart
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 6 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
1/8” Line and Letter
Position Chart
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 7 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
3/16” Line and
Letter Position Chart
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 8 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
1/4” Line and Letter
Position Chart
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 9 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Assembly
Drawings
GIB
Adjustment
Handle
Assembly
Front Guide
Cam
Tag Holder
Screw
Leaf Spring
Rear Guide
Table Spring
Arm Stop
Mounting
Plate
Slide
GIB
Tag Holder Assembly
Pawl
Assembly
Safety Spring
Stop
Adjustment
Set Screw
Connector
Link
Internal Linkage Detail
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 10 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Assembly
Drawings
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
Page 11 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
Repair
Parts List
ID200 Series
Imprinter
BAND-IT
Part
ID2698
ID2918
ID2728
ID2758
ID2788
ID2068
ID2078
ID2088
ID2098
ID2108
ID2718
ID2518
ID2748
ID2778
ID2808
ID2708
ID2628
ID2738
ID2768
ID2798
ID2588
ID2598
ID2898
ID2816
ID2906
ID2826
ID2836
ID2846
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
QTY Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1/16” Dial Wheel
3/32” Dial Wheel
1/8” Dial Wheel
3/16” Dial Wheel
1/4” Dial Wheel
1/16” Escapement Wheel
3/32” Escapement Wheel
1/8” Escapement Wheel
3/16” Escapement Wheel
1/4” Escapement Wheel
1/16” Letter Spacing Decal
3/32” Letter Spacing Decal
1/8” Letter Spacing Decal
3/16” Letter Spacing Decal
1/4” Letter Spacing Decal
1/16” Line Spacing Decal
3/32” Line Spacing Decal
1/8” Line Spacing Decal
3/16” Line Spacing Decal
1/4” Line Spacing Decal
Anvil, .75 X 2.0 Tag
Anvil, 1.5 X 2.5 Tag
Anvil, .75 X 3.5 Tag
Dial Kit, 1/16” Letter
Dial Kit, 3/32” Letter
Dial Kit, 1/8” Letter
Dial Kit, 3/16” Letter
Dial Kit, 1/4” Letter
www.BAND-IT-IDEX.com
Page 12 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Trouble
Shooting
Problem
Probable Cause
Improper line location
Loose or misaligned line
indicator.
Mounting plate not
locked in place tight.
Letters not in a
straight line
Mounting plate bowed
when locked in place.
Operating handle not
returned to original
position.
Table will not index
Table will not index
when handle is returned
to original position.
Table slides left instead
of indexing.
Full letter not printed
GIB needs adjusting.
Small tag: Letters not
in a straight line
Letter impression too
deep.
Depth adjustment screw.
Letter depth incorrect
Capstan screw.
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
Solution
Line setup edge of mounting plate with bottom of
table anvil (Page 2). Lock tag holder in place
with knurled nut. Line first line of line indicator
with bottom right corner of mounting plate.
Tighten the 2 set screws on the bottom of the
line indicator.
Check the knurled nut on tag holder, it must be
tight.
With mounting plate in locked position, loosen 2
set screws on bottom of line indicator. Line
indicator will move slightly to the right. Retighten
the 2 set screws.
After imprinting each character, the operating
handle must be returned to the neutral position
(ram in ‘up’ position).
Remove table per instructions on page 4. Turn
the imprinter upside down. Turn adjustment set
screw ¼ turn clockwise (See page 10). Check
indexing of table, turn screw more if needed.
Remove table per instructions on page 4. Turn
the imprinter upside down. Turn adjustment set
screw ¼ turn counter-clockwise (See page 10).
Check for indexing of table, turn screw more if
needed.
Loosen all 3 GIB adjustment nuts and screws.
Evenly retighten screws. Retighten nuts. (See
page 10)
See letter depth.
Turn depth adjustment screw clockwise to
lighten impression, counter-clockwise to deepen.
If the full range of the depth adjustment screw
does not result in desired impression: Remove
character dial wheel and loosen set screw on
front of ram. Turn the capstan screw clockwise
for a lighter impression, counter-clockwise for
deeper. Adjust depth adjustment screw and
check impression. Retighten set screw on ram.
www.BAND-IT-IDEX.com
Page 13 of 14
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
ID200 Series
Imprinter
Kits
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
www.BAND-IT-IDEX.com
THORNE & DERRICK UK
WWW.CABLEJOINTS.CO.UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
Page
14 of 14
WWW.THORNEANDDERRICK.CO.UK
Document # P98289 rev. C
© Copyright
BAND-IT-IDEX, Inc. 2007
All rights reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement