USB ANT+ Dongle Troubleshooting setup guide

USB ANT+ Dongle Troubleshooting setup guide
USB ANT+ Dongle
Troubleshooting setup guide
Power software cannot detect ANT+
USB device
If the Rotor power software cannot detect your USB ANT+ device, the
Drivers may not have installed correctly, To re-install Drivers first find the
unit on the PC’s Control Panel, this will be in “devices and Printers”
Select ANT USBStick2
Double click “Properties” on the opened dialogue box
Now Select the “Driver” tab and click on “Uninstall”
Now Click “Delete driver software ” and select “OK”
Now remove the USB device from the PC
Now visit
http://www8.garmin.com/support/download_details.jsp?id=591
Download the wizard and run the file
Now Re-insert USB device and open the Power software, The Power
software should now find the ANT device and connect to the crank.
Contact Us:
www.rotorbike.com
www.rotoruk.co.uk
www.velotechservices.co.uk
Call: 0845 475 5339
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement