Brio User Guide
Brio
User Guide
020-101213-05
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
1
Brio
User Guide
020-101213-05
NOTICES
COPYRIGHT AND TRADEMARKS
© 2014 Christie Digital Systems USA Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a
commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the product in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the
pense.
CAN ICES-3 (A) / NMB-3 (A)
이 기기는 업무용(A급)으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며, 가정 외의 지역에서
사용하는 것을 목적으로 합니다.
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which
may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice.
Performance specifications are typical, but may vary depending on conditions beyond Christie's control such as maintenance of
the product in proper working conditions. Performance specifications are based on information available at the time of printing.
Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for
a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in
connection with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This
symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from regular waste.
Please dispose of the product appropriately and according to local regulations. In the European Union, there are separate
collection systems for used electrical and electronic products. Please help us to conserve the environment we live in!
GENERAL WARRANTY STATEMENTS
ranty, please contact your Christie dealer. In addition to the other
a.
b.
c.
d.
e.
f.
g.
Problems or damage occurring during shipment, in either direction.
Problems or damage caused by combination of a Product with non-Christie equipment, such as distribution systems,
cameras, video tape recorders, etc., or use of a Product with any non-Christie interface device.
Problems or damage caused by misuse, improper power source, accident, fire, flood, lightening, earthquake or other
natural disaster.
Problems or damage caused by improper installation/alignment, or by equipment modification, if by other than
Christie service personnel or a Christie authorized repair service provider.
Problems or damage caused by use of a Product on a motion platform or other movable device where such Product
has not been designed, modified or approved by Christie for such use.
Problems or damage caused by use of a system in the presence of an oil-based fog machine.
Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the continued and proper operation of your product. Please see the
Maintenance section for specific maintenance items as they relate to your product. Failure to perform maintenance as required,
and in accordance with the maintenance schedule specified by Christie, will void the warranty.
Table of Contents
Welcome to Brio ...................................................................................................................... 7
Quick Start ........................................................................................................................... 7
Set up .................................................................................................................................... 8
Set up PtP Connection (Optional) ...........................................................................................10
Meeting Manager ....................................................................................................................11
Connect to the Meeting Manager ............................................................................................12
Wired Connection ............................................................................................................... 12
Wired Directly to Brio .......................................................................................................... 12
Wireless Connection............................................................................................................ 12
PtP (point-to-point) Connection ............................................................................................ 13
Presentation Area.................................................................................................................13
Security ..............................................................................................................................14
Source List ..........................................................................................................................15
Reorder the Sources .............................................................................................................16
Preview your Sources ...........................................................................................................16
Select your Primary Output ...................................................................................................16
Meetings .............................................................................................................................17
Help ...................................................................................................................................17
Address Book ..................................................................................................................... 17
Start a Meeting .................................................................................................................. 19
Join a Meeting .................................................................................................................... 20
Share Presentation Area ...................................................................................................... 21
Update Meeting Attendees ................................................................................................... 24
End/Exit a Meeting ............................................................................................................. 25
Start Collaborating ..................................................................................................................26
Connect to Brio ....................................................................................................................26
Connect DVI Sources .......................................................................................................... 26
Windows OS Sources .......................................................................................................... 27
Apple ................................................................................................................................ 30
Android ............................................................................................................................. 32
Port Authority Tool ............................................................................................................. 32
Whiteboarding .....................................................................................................................32
Brio Whiteboarding ............................................................................................................. 33
Web Whiteboarding ............................................................................................................ 33
Sketching .......................................................................................................................... 33
Administration ........................................................................................................................35
System Settings Page ...........................................................................................................35
General Tab ....................................................................................................................... 35
Network Tab ...................................................................................................................... 37
Connect Brio to a Network ................................................................................................... 40
Software Tab ..................................................................................................................... 41
Security Tab ...................................................................................................................... 43
Mounting Options ....................................................................................................................45
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
5
Mount Brio in a Rack ........................................................................................................... 45
Mount Brio under a Desk ..................................................................................................... 45
Mount Brio behind a Monitor ................................................................................................ 46
Cable and Power Connections and Status LED.............................................................................49
Periodic Maintenance ...............................................................................................................51
Safety Precautions ..................................................................................................................53
Warnings ........................................................................................................................... 54
SBC Battery Warning .......................................................................................................... 54
Service Warning ................................................................................................................. 54
Class I Construction Warning ............................................................................................... 54
Labeling Glossary .................................................................................................................54
Product Compliance ..............................................................................................................55
End-of-Life Disposal .............................................................................................................55
Appendix A
Brio Specifications ..............................................................................................56
Appendix B
Ports used by Brio ..............................................................................................57
Appendix C
Port Authority ....................................................................................................58
Index ....................................................................................................................................59
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
6
Welcome to Brio
Brio is a presentation and collaboration solution that makes it easy to share and compare up to five
presentations with others. With a few quick keystrokes or taps on your Mac, PC, iPad, or, wired or
wireless device, you can share your audio, high definition video, whiteboards, and other information in
a single room or with multiple people in multiple locations.
To access product information or software updates, register your Brio at
http://www.vistasystems.net/vista-support/pages/update-notifications.aspx.
For support for this product, visit:
http://www.christiedigital.com/en-us/product-support/support-offices/Pages/default.aspx
Quick Start
Here are a few references to help you get started.
Task
Reference
Page
Set up Brio and displays.
Set up
8
Power on Brio and connected displays.
None
Connect to the Meeting Manager.
Connect to the Meeting Manager
12
Connect Brio to a network and set the
Network Settings.
Network Tab
37
Optionally, set up the PtP option.
Network Tab
37
Connect sources.
Browse to Brio’s IP address/connect
Manage your presentation
Presentation Area
13
Change the administrator’s password.
Security Tab
43
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
7
Set up
Required accessories:

Two DVI cables to connect the displays to the Brio

Speakers and related cables

Ethernet cable to connect to a network or a wireless router

A device with a Web browser
 Some connectors on the rear panel have been closed off with connector plugs. Do not
remove these.
To ensure proper ventilation for the unit, ensure the wiring does not obstruct the air
flow to or from the air vents.
1. Unpack Brio and inspect for damage.
If there is any physical damage to the Brio,
contact your vendor for further instructions.
2. Using the packing list, verify the contents of
the shipment.
Brio unit and accessory kit:
1 Power cord—used to apply power to the unit.
1 USB flash drive—used to access the documentation.
4 Feet—self-adhesive non-skid rounds, applied when
unit is not mounted (1 strip of 4).
3. Determine where you want to set up Brio.
It can be located on a table, under a table, in
an equipment rack, or behind a monitor.
Refer to Mounting Options (page 45) for
additional information.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
Under table:
Rack mounted:
Behind monitor (VESA
1):
Behind monitor (VESA
2):
8
4. Using DVI cables, connect a monitor to the
Output A connector; optionally, connect a
second monitor to the Output B connector.
 For optimum functionality, two HID compliant
multi-touch monitors are recommended.
 If the monitors are not the same resolution,
connect the monitor with the lower resolution
to Output A. The resolution sent to Output B
automatically matches Output A. Output
EDID settings may be manually changed
using the administrative settings.
5. To use whiteboarding, the monitor connected
to Output A must be an HID compliant multitouch monitor. The USB cable from the
monitor must be connected to a USB port on
the Brio unit prior to powering on Brio.
6. Connect Brio to the network that will be used
by meeting participants, or set up the PtP
Option connection.
Refer to the Network Tab, page 37.
7. To power on Brio, plug it in and press the
power switch. The LED turns solid green when
Brio is ready. When powered on, the splash
page provides tips for getting started.
8. To access the Meeting Manager, connect a
device with an Internet browser to the Brio
unit.
Refer to Connect to the Meeting Manager (page
12).
9. Connect DVI sources to Brio using the Input A
and Input B connectors.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
9
10. Connect audio:
a.
Connect the audio out cable for the DVI
source connected to Input A to the blue
In A port.
b.
Connect the audio out cable for the DVI
source connected to Input B to the pink
In B port.
c.
Connect the speaker to the green Line
Out connector.

The other ports are for future use.
11. Connect wireless sources.
Refer to Connect to Brio, page 26.
Set up PtP Connection (Optional)
The PtP connection requires the optional wireless adapter and a license for this feature.
When the Brio is set up with a PtP connection, it is isolated and meetings with other Brios are not
supported.
To set up the connection:
1. Plug in the PtP adapter to a USB port on Brio.
2. In the PtP Option Settings on the Network tab on the System Settings page, assign a name and
password to the SSID (refer to Network Tab, page 37).
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
10
Meeting Manager
The Meeting Manager is the user interface for the Brio. It is used to:

Select the language used for the Meeting Manager.

Organize presentations by rearranging the position of the sources on the outputs.

Connect one Brio unit to other Brio units in a multisite meeting.

Disconnect sources.

Start and end the Brio whiteboard.

Access the Web whiteboard.

View the status of a current meeting.

Select audio.

Restart or shutdown the Brio.

Set security.

Get help for connecting sources.
The splash page is displayed when Brio is powered on.
The splash screen background image displays the IP address for the Brio, the current meeting
password (if set), network information to help you connect to Brio, and an optional message (if
defined).
The splash screen contents can be changed by an administrator.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
11
To use the Meeting Manager, you must connect a device with a browser to Brio.
 Normal Web page conventions are used throughout the Meeting Manager. This document assumes
you are familiar with these concepts.
Any of the following Web browsers can be used with Brio:

Internet Explorer, version 9.0 and higher

Firefox, version 14.0 and higher

Chrome, version 21 and higher

Safari, version 5 and higher
Connect to the Meeting Manager
You can connect to the Meeting Manager using a browser-capable device. Your device must be on the
same network as Brio. If security is enabled for the Meeting Manager, a password is required to access
the Meeting Manager. Refer to Security (page 14).
Wired Connection
1. Connect your browser-capable device to the same wired LAN and subnet as Brio.
From a browser, type the Brio IP address in your Web browser address field.
Wired Directly to Brio
1. Using an Ethernet switch, connect your browser-capable device to the Network 1 connector on the
Brio.
2. From a browser, type the Brio IP address in your Web browser address field.
Wireless Connection
1. From your wireless device, connect to the same network and subnet as the Brio unit.
From a browser, type the Brio IP address in your Web browser address field.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
12
PtP (point-to-point) Connection
1. Connect to the Brio WAP.
 You need the name of the WAP and the password.
Presentation Area
Up to five sources can be displayed in the presentation area in the Meeting Manager. This example
shows three sources on a Brio with two output displays (A and B).
The presentation area displays sources as follows:

When hosting a meeting, the content on Output A (the area outlined in green) is shared with
the attendees that have one display connected to Brio. If the attendees have two displays
connected to their Brio, all the content is shared.

Sources can be moved to different positions in the presentation area by reordering the sources
in your source list.

When the whiteboard is active, the source displayed on Output A is moved to the Output B (if
two outputs are connected).

By default, the display connected to the Output A connector is your primary output. You can
change this to output B by selecting Output B as your primary output.

You can preview sources before displaying them in the presentation area by clearing the
Auto-show check box. Select the preview button ( ) associated with the source to view a
thumbnail preview.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
13
Security
Securing the Meeting Manager prevents unauthorized devices from connecting to Brio and it also limits
access to the interface page.
1. To secure access to the Meeting Manager, click
Security.
2. Type a password (a minimum of four characters)
and enter the duration to secure the Meeting
Manager, and then click Start.
The Meeting Manager is secured and a timer is
activated for the duration.
 The Duration field is unavailable if the
Enable persistent security check box is
selected on the System Settings page.
3. If you secure the Meeting Manager, you must
share this password with users who need to view
the Meeting Manager or share sources in a
meeting. When attempts are made to view the
Meeting Manager or connect sources, users are
prompted for the password.
4.
To reset the password, click Security and type a
password.
Once secured with a password, to end security
click End Security.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
14
Source List
From the source list, you can rearrange the sources on the presentation area and use the buttons and
check boxes as follows:
Auto-show
Select to automatically show the source in the presentation area when
the source is connected to Brio. Clear to disable automatic preview. If
disabled, use the preview button to preview the source.
Use
numbers
Select to display the source numbers on the sources in the presentation
area. Clear to remove the source numbers from the sources in the
presentation area.
Duplicate
Select to duplicate source #1 on both outputs.

When this feature is active, the Brio whiteboard is unavailable.

If the source is hidden (using the show/hide button), this feature is
unavailable.

If this feature is enabled and #1 source is hidden after the feature
is enabled, the background for the Brio is displayed.
Show/Hide
Toggle to display the source on the presentation area or remove it from
the presentation area.
Preview
Previews the source in a pop-up on the Meeting Manager web page (not
in the presentation area).
Audio
Toggle to turn audio on or off for a source. Audio is automatically turned
off when a source is connected. Volume is controlled at the source (or at
your sound system.
When attending a multisite meeting, mute the audio from your sources
if you are not the presenter.
 If you are presenting (sharing your presentation area) and mute
your audio, audio is muted for all meeting attendees.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
15
Disconnect
Disconnects the source from Brio and removes the source from the list.
 DVI sources have to be physically disconnected.
Reorder the Sources
Use the Row Reorder ( ) icon to drag and drop the sources within the source list and rearrange them
on the presentation area. The position of the source within the list determines its location on the
presentation area. If you have Use numbers selected, the source number is displayed in the
presentation area. These numbers are useful when organizing your presentation.
Preview your Sources
When sources are connected to Brio, they are automatically displayed on the presentation area unless
you have elected to preview them first.
To preview sources before they are displayed in the presentation area:
Clear the Auto-show check box.
Connect a source to Brio.
Refer to Connect to Brio, page 26.
Click and hold the Preview button.
Click the Show/Hide button to display the
source on the presentation area.
Select your Primary Output
This option is not available when only one output display is connected to Brio.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
16
Depending on your preferences, you can select the display connected to Output A or Output B as your
primary output. The primary output displays the #1 source from the source list. The other display tiles
any additional sources.
To change your primary output, use the Select primary buttons.
 The whiteboard is always displayed on the left in the presentation area regardless of the setting
for the primary output.
Meetings
You can start a meeting with local attendees or a multisite meeting (license required) with other Brio
locations. Whoever starts the meeting is the meeting host. In a multisite meeting, the host can add or
remove meeting attendees and ask attendees to be meeting presenters.
Help
Select Help on the main page to access the How to connect page, access the user guide, restart, or
shutdown. The restart option reboots Brio and the shutdown option powers off Brio.
 Click Help again to dismiss the Help list.
Address Book
Your address book contains the contact information for other Brio units. You use this contact
information to invite attendees to meetings.
Add an address to your address book
Click Address Book.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
17
Click Add.
 Click Name or Location to sort the list.
Type a name, location, and IP address for the
Brio unit and click Save.
 Names are case sensitive.
Delete an address from your address book
Click Address Book.
Select the address you want to delete.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
18
Select Delete.
Start a Meeting
When you start a meeting, you are the presenter until you give another attendee permission to
present their presentation. The presenter’s whiteboard is shared with all meeting attendees.
To invite other Brios to a multisite meeting, click
Start.
Select the check box associated with the desired
attendees and click Start.
 Click Name or Location to sort the list.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
19
The status for the meeting is updated as
responses are received.
Host of meeting
Attendee accepted invite
Attendee declined invite
Attendee hasn’t responded
Attendee is currently presenting
(displaying their presentation area) in
the meeting.
To add or remove attendees, select the address
book icon.
To ask an attendee to be a presenter, select the
transfer icon.
Join a Meeting
When you are invited to a meeting, you receive a meeting request through the Brio Meeting Manager.
You can join the meeting or decline the request. You can also join a meeting by requesting to join.
Prior to joining a meeting, save your whiteboard sketches to load them another time. When you join
the meeting, the presenter’s whiteboard is shared with all meeting attendees. When attending a
meeting, the whiteboard is a collaborative whiteboard. All attendees can contribute to the whiteboard
by sketching, loading a saved sketch
, undo/redo changes to the sketch, etc.
When the meeting is ended, all attendees have a copy of the sketch from the meeting.
To join a meeting after you have received an
invitation, click Yes to accept the invitation.
To join a meeting in progress without receiving an
invitation, click Join, select the Brio hosting the
meeting you want to join, click Join Meeting.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
20
Share Presentation Area
When you are hosting a meeting, you can invite another Brio to be a presenter and share its
presentation area. If you are attending a meeting, you can send a request to the host asking to be the
presenter and share your presentation area.
The host manages the sharing of the presentation area with other attendees. The attendee who is
presenting is highlighted in the Meeting in Progress list with the presenter icon
illustrates sharing the presentation area.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
. The following
21
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
22
Attendee Requests to be Presenter
To send a request to the meeting host to ask to be the
presenter, click
prompt.
. Respond to the confirmation
If the host accepts your request, your presentation area is
shared with the meeting attendees.
If you want to quit presenting. Click
and respond OK
to the confirmation dialog. The meeting attendees then see
the presentation area of the meeting host.
Host Requests an Attendee to be Presenter
To send a request to an attendee to be the
presenter, click
.
The host selects an attendee from the list of
meeting attendees, and then clicks Send.
The attendee receives a request from the host.
If the attendee accepts the request, their
presentation area is shared with the other
attendees including the host.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
23
Host Requests to be Presenter
If the host wants to share the presentation area
or end sharing by another presenter, the host
selects
.
The host selects its name from the address book,
and then selects Send.
The host’s presentation area is shared.
Update Meeting Attendees
If you are hosting a meeting, you can invite additional attendees or remove existing attendees.
To update the attendees, select
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
.
24
Select the check box associated with the
additional attendees you want to invite and/or
clear the check box associated with the attendees
you want to remove, and then click Update.
Review the confirmation and confirm or make
additional changes.
End/Exit a Meeting
To end the meeting you are hosting, click
.
If you are the host, the meeting is ended for all
attendees.
To quit a meeting you are attending, click
.
If you are attending the meeting, you are no longer
connected to the meeting, but the meeting will
continue.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
25
Start Collaborating
Add the sources for your presentation and start collaborating.
Connect to Brio
The steps to connect a device to Brio depend on the type of device you are connecting. Once a device
is connected, it is displayed in the source list.
 Since Brio supports various operating systems and devices manufactured by multiple
manufacturers, also refer to your device’s user documentation.
For help connecting sources to Brio, select How to connect from Help or type Brio’s IP
address/connect (e.g., 10.10.30.149/connect) in your Web browser address field. The How to
connect page provides help for connecting sources using various operating systems. To get help for
your device, select the appropriate button (Windows 7, Windows 8, OSX, or Android). To return to the
main page, select Brio Home.
If you have trouble connecting, you can use the Port Authority tool to verify the settings on your
personal device. Refer to Port Authority Tool (page 32).
Connect DVI Sources
Connect DVI sources to the Input A or Input B
connectors.
Connect the other end of the cable to the source.
Connect power to the source.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
26
Windows OS Sources
To connect Windows-based sources on your network to Brio, connect using Brio Screen Projector or
Microsoft Network Projector.
Connect with Brio Screen Projector (Windows 7 and 8)
1. Download Brio Screen Projector from
the How to Connect page.
 Only users with administrative privileges
can install Brio Screen Projector.
2. Select BrioScreenProjectorSetup.exe
to launch the install wizard, and then
follow the prompts.
3. Launch Brio Screen Projector.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
27
4. Type the IP address or the DNS (Domain
Name System) name (if provided by
your administrator) of the Brio you want
to connect to, and then select
to start with audio muted, or
select
to start with audio.
When started, the Brio name is displayed
in this field and in the drop down list.
You can use the drop down list to select
a Brio after entering its IP address once.
If you started Brio Screen Projector with
audio muted, the dialog is minimized; if
you started with audio, use the slider bar
to adjust the volume.
 Make sure audio is enabled for this
source in the Meeting Manager.
5. To disconnect, select Stop stream.
Network Projection
Network Projection is provided with Windows. You may need to activate it.
 To use Network Projection, you must allow an exception for network projection to your Windows firewall
or turn off your firewall.

Only users with administrative privileges can activate Network Projection.
Activating Network Projection for Windows 8 and 8.1 OS
1. In the Windows control panel, in the Programs and Features section (Control Panel 
Programs  Programs and Features), click Turn Windows features on or off.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
28
2. Scroll to Network Projection, select it, and click OK.
 For easy access, right click on the file name and choose pin to taskbar.
Activating Network Projection for Windows 7 OS
1. Click the Start button.
2. In the search box, type Connect to a Network Projector.
3. In the list of results, click Connect to a Network Projector.
Connect with Network Projector (Windows 7, 8, and 8.1)
1.
2.
With your device connected to the local
network with a wired or wireless Ethernet
connection, launch Windows Network
Projector on the source you want to
connect to Brio.
Select Enter the projector network
address.
 If your network supports multicasting, you
could search for the Brio you want to connect
to. The Brio units are listed by their name.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
29
3.
Type the network projector address you
want to connect to using the following
format:
http://IP address/LAN
(where IP address is the IP address
of the Brio you want to connect to)
4.
5.
Optionally, if security has been set on the
Brio, type the password that was used to
secure the Brio.
Select Connect.
Apple
Wired connection:
1. Connect your Apple device to Brio using an
Apple Digital AV adapter and a cable with a
DVI connector.
 The Apple adapter may vary for
different versions of the Apple
devices. If you have problems
connecting, check if your device
requires a dual-link DVI connector.
2. Connect the DVI connector to the Input A or
Input B connector on Brio.
Wireless connection:
1. Connect your iOS or OS X device to the
same Wi-Fi network as Brio.
2. Turn on AirPlay as follows:
 The AirPlay icon is not visible in the iOS
interface unless an AirPlay compatible receiver
such as Brio is present on the same network.
 To use AirPlay Mirroring, you need the
following:

iPhone 4s or later

iPad 2 or later

iPad mini or later

iPod touch (5th generation)

Apple TV (2nd or 3rd generation)
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
30
AirPlay for iOS 7
a.
From the main Home screen, swipe up
from the bottom of the screen to access
the Control Center.
b.
Tap the AirPlay icon
c.
Tap your Brio to activate AirPlay.
d.
Optionally, toggle the Mirroring slider to
ON (green) to turn on mirroring.
e.
When finished using AirPlay:
.

For iPhones, tap Done and swipe
down to close the Control Center.

For iPads, tap anywhere outside the
AirPlay device list, and then swipe
down to close the Control Center.
AirPlay for iOS 6
Double tap the home button to open the
multitasking bar.
Swipe the multitasking bar twice from left to
right until you see the AirPlay icon
.
Tap the AirPlay icon.
Select your Brio to activate AirPlay.
Optionally, toggle the Mirroring slider to ON to
turn on mirroring.
Mirroring is not available when your device is
connected to a video adapter.
When finished using AirPlay:
For iPhones, tap Done and tap the home button
to close the multitasking bar.
For iPads, tap anywhere outside the AirPlay
device list, and then tap the home button to
close the multitasking bar.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
31
AirPlay for OS X (Mountain Lion and up)
a.
Select the AirPlay icon
from the
menu bar to share your screen; or select
the AirPlay icon on iTunes to share your
iTunes media.

b.
c.
d.
Apple does not support desktop
mirroring when iTunes is open.
Select your Brio to activate AirPlay.
Optionally, to activate mirroring check
Mirror Built-in Display.
When finished using AirPlay, select
Disconnect AirPlay Display.
Android
Wireless connection:
1. Connect a Miracast receiver to Input A or
Input B.
2. Connect your Android device to the Miracast
receiver using the method for your device.
Port Authority Tool
Port Authority can be used to determine if a network has multicasting enabled and if the ports
Network Projector uses are open. If Network Projector cannot find a Brio on the network, Port
Authority can be used for troubleshooting purposes.
You can download this tool from the Windows 7 or Windows 8 buttons on the How to Connect page
(refer to Connect to Brio, page 26).
For additional details about this tool, refer to Port Authority, page 58.
Whiteboarding
A HID compliant multi-touch panel is required for the Brio whiteboard in the Meeting Manager. The
panel should be connected to Output A through DVI and to a USB port on Brio prior to operation.
To join an active whiteboard session from any personal device, the personal device must have a
mouse or be a touch-enabled device.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
32
Brio Whiteboarding
From the Meeting Manager, click Start to begin a
whiteboard session. The whiteboard session is
started on your touch screen.
When attending a meeting, the whiteboard is
shared with all attendees and the attendees can
interact with the whiteboard.
Web Whiteboarding
When you want to collaborate with a whiteboard
session on your personal device, from the Brio
Meeting Manager, select Join.
 If a whiteboard session isn’t started,
select Start and then Join.
Sketching
To start sketching
Select the pen icon.
Select the desired
pen thickness.
Select the desired
color.
To erase from the current sketch on the
whiteboard:
Select the eraser icon.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
33
To load a previously saved sketch or a
background image (.gif, .bmp, .jpeg, .jpg, or
.png) from a flash drive connected to Brio, tap
on the Brio whiteboard, select a sketch, and
then tap
.
 Background image files should be no
larger than 4 MB.
 To load a sketch or background image
from a flash drive, the sketch cannot
be in a folder.
If you have more than one page of sketches
saved, use the
and
buttons to view
additional sketches.
From Web whiteboard, select
and load the
sketch using the method for your personal device.
 Only presenters (sharing presentation
area) can load sketches for the Web
whiteboard.
To save your whiteboard, from the Brio
whiteboard, tap
.
If you have a flash drive connected to Brio, your
sketch is saved on the flash drive.
If you don’t have a flash drive connected to Brio,
the sketch is saved to local memory in the Brio
unit.
From a personal device, select
and save the
sketch using the method for your personal device.
To clear the whiteboard, tap
.
To delete a saved sketch (Brio whiteboard only):
1. Tap
.
2. Select the sketch you want to delete.
3. Tap Ok.
To undo the last action, select
.
To redo the previously undone action, select
To zoom in, tap
To zoom out, tap
.
(Brio whiteboard only).
(Brio whiteboard only).
To end your Brio whiteboard session, select End.
 To save your sketch, tap
first.
To end your web whiteboard session, select
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
.
34
Administration
The administrator uses a secure page to administer Brio.
 Changes to the settings should not be made when the Brio is attending a meeting. Some changes
require a system restart.
System Settings Page
The System Settings page is accessed by typing the following in the address bar of your browser:
IP address/admin (e.g., 10.10.30.143/admin)
The default password for this page is admin. As an administrator, you should change this password
for security purposes.
The System Settings page is used by administrators to do the following:

Change the default administrator password.

Set the system settings.

Set the splash screen settings.

Update software license or software version.

Set the security settings.

Select the language for the System Settings page and the Meeting Manager.
General Tab
Use this tab to view or set general settings for Brio, and optionally the PtP settings. Additionally, you
can set the settings for the splash screen.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
35
Language
Language
Selects the language for the System Settings page and the Meeting Manager.
General Settings
Name
User-defined name (up to 20 characters) for Brio.
Serial Number
Displays the serial number assigned during manufacturing.
Location
User-defined location for the unit.
Display language
Sets the language displayed on the splash screen and the Brio whiteboard.

This language can be different than the language for the Meeting Manager.
Output Resolution
Applies the selected resolution to the outputs. The default is Auto Detect. When Auto
Detect is selected, the current resolution is displayed below this field.
Number of Outputs
Specifies the number of connected outputs if the output resolution is not set to Auto
Detect. The selected resolution is used for all connected outputs.
This field is hidden if the Output Resolution is set to Auto Detect.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
36
Background Settings
Background selector:
Default
Displays the splash screen that provides getting started information in the selected
language.
Since this information is most useful at startup, when you add more than two sources
the image is hidden and a black background is displayed. The splash screen is
redisplayed when you remove the sources.
Background selector:
Image
Sets a background image for the presentation area and the displays connected to the
Brio. Valid file formats are .gif, .bmp, .jpeg, .jpg, or .png. When using two displays,
the background image should match the combined resolution of the two displays.

Background image files should be no larger than 4 MB.
Background selector:
Color
Sets a background color for the presentation area and the displays connected to the
Brio.
Primary network displayed
on splash screen
Sets the primary network (Network 1 or Network 2) displayed on the splash screen.
The information associated with this network is displayed to help users connect to
Brio.
Headline
Sets a title for administrator message (up to 45 characters) that is displayed on the
splash page.
Message
Sets the user-defined message (up to 4 lines of 79 characters). This message is
displayed on the splash page when the splash screen background is active.
Network 1
Identifies the SSID (up to 15 characters) of the network used to connect devices to
Brio. If your network has two names, complete the SSID Name 2 field. These names
are displayed on the Splash Screen.
SSID Name 1
SSID Name 2
Network 1
Network Password
Identifies the password for the SSID. This password is displayed on the Splash
Screen.
Network Tab
Use this tab to view or set network settings for Brio. The fields on this page differ for the Adaptive
streaming, Basic, and Advanced settings.
The settings associated with the network 1 connector are set on the Network 1 tab. The settings
associated with the network 2 connector are set on the Network 2 tab.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
37
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
38
Network Settings
LAN Settings
Manual
Enables input of the LAN (Local Area Network) settings.
DHCP
Uses DHCP (Dynamic Host Configuration Protocol) to obtain the LAN settings
automatically.
 To avoid changes to the IP addresses, use static IP addresses. This
also prevents having to update your address book due to changes in
IP addresses.
IPv4 address
The IP (Internet Protocol) address for the unit (version 4). The valid format is:
nnn.nnn.nnn.nnn.
The factory default is set to DHCP. If DHCP is not available, the factory default IP
address is 192.168.1.100. For units with the PtP option, the default address is
192.168.173.1.
Default Gateway
The node on the network that the network software uses when an IP address does not
match any other routes in the routing table.
Subnet Mask
The subnet mask for the network address.
DNS Server
The DNS server for resolving domain names.
MAC Address
Displays the MAC address for Brio.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
39
Hostname
Displays the hostname for Brio.
PtP Option Settings
Name (SSID)
Sets the name for the optional Brio wireless adapter. This adapter can be used to
connect wireless devices to Brio. This feature requires a PtP license.
Password
Sets the password for the optional Brio wireless adapter. The password must be at
least 8 characters.
Network Performance Settings
Meeting Tab
Adaptive Streaming
Automatically detects the optimum settings for a meeting based on current network
performance. This is the default setting.
Basic
Use the slider bar to adjust your network settings for better performance during
multisite meetings. A lower setting reduces video quality and improves the network
performance.
Advanced
Manually select the network settings to optimize performance during multisite
meetings.
Encode Bit Rate
Bit rate per second for encoding sources from the presenter
during meetings. Valid options are: 1024, 2048, 3072, and
4096. The default is 2048.
Frame Rate
Frames displayed per second during a meeting. Valid
options are: 15 or 30. The default value is 15.
MTU Size
Maximum Transmission Unit size, which is the maximum
size (in bytes) for a single data packet on the network.
Larger packets decrease the bit rate. Valid values are: 1250,
1300, 1350, 1400, and 1450. Default value is 1250.
QoS
Quality of Service setting for the Brio using DSCP (Diffserv
codepoint) encodings settings. Default value is off.
Protocol
Protocol used by attendees (audience viewing a presentation
presented by another Brio) during multisite meetings: UDP
(User Datagram Protocol) or TCP (Transmission Control
Protocol). UDP increases speed but can cause pixilation. TCP
can increase reliability. UDP is the default.
Note:
The setting for each Brio only impacts the
associated outputs on that Brio.
Brio Screen Projector Tab
Encode Bit Rate
Bit rate per second for encoding Brio Screen Projector sources during meetings. Valid
options are: 1024, 2048, 3072, and 4096. The default is 2048.
Protocol
Protocol used for Brio Screen Projector during multisite meetings: UDP (User
Datagram Protocol) or TCP (Transmission Control Protocol). UDP increases speed but
can cause pixilation. TCP can increase reliability. UDP is the default.
Connect Brio to a Network
Use the network settings on the Network tab to connect a Brio to the network.
Two networks can be set up using the Network 1 and Network 2 connectors on Brio.
If a Brio is only connected to one network, it must be connected using the Network 1 connector on
Brio. The Network 1 tab in LAN settings is used to assign the LAN settings for the network connected
to the Network 1 connector. To host or attend a multisite meeting, you must use the network
associated with the Network 1 connector.
The Network 2 tab in LAN settings is used to assign the LAN settings for the optional network
connected to the Network 2 connector. If this optional network is set up, users connected to either
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
40
network can share sources. Users connected to Network 2 have limited access to Brio. They can only
connect devices to Brio. They cannot access the Meeting Manager.
Note: If the Brio is connected to two networks, the networks must be on different subnets.
1. Connect Brio to the network that will be
used by meeting participants or setup the
PtP Option connection (follow the steps on
the right).

From the factory, Brio defaults to DHCP
(Dynamic Host Configuration Protocol).
However, if a DHCP sever is not
available, the IP address defaults to
192.168.1.100. These default settings
are displayed when Brio is powered on.
These settings must be reconfigured for
your LAN. Contact your network
administrator.
Wired Connection:
1. Connect an Ethernet cable to the Network 1
connector (supports 1000BASE-T Ethernet) on
the back of the unit.
2.
Connect the other end to your LAN.
 The network switch must be a 10/1000
Gigabit network switch. Enabling
multicast on the switch is
recommended to allow search
capability for Network Projector and
AirPlay.
3.
Using the Brio System Settings, assign an IP
address to communicate with your network or
enable DHCP.
 To avoid changes to the IP addresses,
use static IP addresses.
PtP (point-to-point) Option using optional
wireless adapter:
For meeting attendees to participate in a
meeting with another Brio, their device must
be connected to the network on the same
subnet connection or the same WAP (Wireless
Access Point) as the Brio hosting the meeting.
When you setup the PtP option, you are creating
a Wireless Access Point (WAP).
If you are offsite at another location the brio
will need be on a network sharing service
such as a VPN (Virtual Private Network) or
MPLS (Multiprotocol Label Switching).
1. Insert the wireless adapter you purchased
with your unit into a USB port on Brio.
A default wireless network has been set up so you
can connect a wireless device. To modify the
settings for this default network:
2. From a browser, type 192.168.173.1 (Brio’s
default IP address for a wireless-capable unit)
in your Web browser address field.
3. From your wireless device, connect to Brio’s
default wireless network as follows:
Name: serial number of your Brio (found on
the label on the bottom of the unit).
Password: password
4. Use the Brio’s PtP Settings to assign a new
name and password for your Brio’s wireless
network.
Software Tab
Administrators use this tab to view or update the software and firmware versions and software
licensing options.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
41
Your Settings
License
Displays the current license (Basic, Multisite, and/or Wireless) and
date the license was enabled.
Software version
Displays the current software version.
Firmware version
Displays the current firmware version.
Check for updates
Automatically checks for updates for the license, software, and
firmware.
Click Check for updates and respond to the prompts. If an update
is started, a progress bar displays the status of the update.

The Brio has to be connected to the Internet and port 21
must be open.
During a software update, ensure power and an Internet
connection is reliably applied to the unit during the entire
process. Failure to do this may cause problems with the
software and possibly make the Brio inoperable.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
42
Manual Updates (offline)
Update Software/Firmware
Manually updates the software version.
1.
Click … and select the desired .BFW file from your personal
device.
2.
Click Apply New Software. A progress bar displays the
status of the update.
During a software update, ensure power is reliably applied
to the unit during the entire process. Failure to do this may
cause problems with the software and possibly make the
Brio inoperable.
Update License
Manually updates the software license if you purchase additional
Brio options (e.g., PtP (Point to Point) and multiple site meetings).
To activate one of these options when the Brio is not connected to
the Internet, send a request to update your license as follows:
1. Click License Request form.
2. Complete the request form.
3. Click Save.
The file is saved in the default documents area of the
connected device.
4. Email the form to support at:
[email protected]
5. When you receive the license from support, click … (near
the Apply your (.LIC) file field).
6. Select the file you received from support, and then click
Apply New License.
Security Tab
Use this tab to set the Admin password that is used to access the System Settings page, to set the
password for security with no expiration time, and to set the options to override the session security.
Session security is set using the Security link on the Meeting Manager. The security options include:

Set security with no expiration time.

Resetting the session security when Brio is restarted (either by using the power button or the
Settings  Restart option on the Meeting Manager).

Resetting the session security when there is no activity on the Brio for a set amount of time.
Activity includes source activity (videos, looping PowerPoint presentations, etc.), no Network
Projectors connected, no Brio Screen Projectors connected, and no meetings in progress.

Ending the session security from the Security tab by selecting the End Security button.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
43
Admin Password
Password
Confirm
The administrator password for security.
The default password is admin. This password should be changed
when the administrator sets the system settings.
The password must have a minimum of four characters.
Reenter the password.
Security Override
Set security with no expiration
time
Enables security to be set without a time limit. A password is
required to activate this feature. The password must have a
minimum of four characters.
To end security, clear the check box and select Save.
When this option is selected, the other reset security options are
not available.
Reset session security on Brio
restart
Overrides the session security when the Brio is restarted.
Reset session security when
inactive for n minutes
Overrides the session security when there is no activity on the Brio
for a set amount of time. If this option is selected, you must enter
an inactivity time (n).
Activity includes source activity (videos, looping PowerPoint
presentations, etc.), no Network Projectors connected, no Screen
Projectors connected, and no meetings in progress.
End Security Session
Click to immediately end session security.
Session password
Set the session password for persistent security. This field is only
available when the Enable persistent security option is selected.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
44
Mounting Options
Using an optional mounting kit, the unit can be rack mounted, desk mounted, or mounted behind a
monitor.
Regardless of the mounting method chosen, care should be taken to ensure that
airflow is unobstructed at the front and back of the shelf. Air flows from the
bottom front to the rear top.
Mount Brio in a Rack
Tools and equipment required: screws (provided), rack mounting bracket (provided), and standard
tool kit.
The unit can be mounted in a standard 19-inch equipment rack using the mounting brackets (ears)
and screws provided in the install kit.
1. Attach the rack mounting brackets to the unit using the 4 small screws (8-32 x 3/8) provided
in the install kit.
1. Rack mounting bracket
2. 8-32 x 3/8 screw
3. Brio
Figure 1 - Rack Mounting Brackets
2. Attach the rack mounting brackets to the rack rails using the four large screws (10-32 x ¾)
provided in the install kit.
3. Install additional units following the above steps.
Mount Brio under a Desk
Tools and equipment required: screws (provided in optional bracket kit), mounting brackets
(provided in optional bracket kit), and standard tool kit.
The unit can be mounted under a desk or other flat surface using the optional Under-Desk bracket kit.
1. Attach the mounting brackets to the unit using the four small screws (8-32 x 3/8) provided in
the kit.
1. Rack Ear
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
2. 8-32 x 3/8 screw
3. Brio
45
Figure 2 - Under Desk Mounting Brackets
2. Attach the mounting brackets to the underside of the desk using the appropriate hardware.
Mount Brio behind a Monitor
Tools and equipment required: screws (provided in optional bracket kit), mounting brackets
(provided in optional bracket kit), and standard tool kit.
The unit can be mounted behind a monitor using the optional VESA 1 or VESA 2 bracket kit.
Mount Brio using the VESA 1 Kit
1. Attach the bracket to the unit using the four small screws (8-32 x 3/8) provided with the
brackets.
1. Monitor, 100 mm or 200 mm
mounting
2. Mounting bracket
3. 8-32 x 3/8 screw
4. Brio
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
46
Figure 3 – VESA 1 Mounting Brackets
2. Attach the bracket to the monitor using the appropriate hardware.

You can re-use the screws that secured the monitor stand.
Mount Brio using the VESA 2 Kit
1. Attach the bracket to the monitor using the stand mounting screws.
2. Attach the bracket to the monitor stand using the appropriate hardware.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
47
1. Monitor stand
2. Monitor, 100 mm or 200 mm
mounting
3. VESA 2 bracket
4. 8-32 x 3/8 screw
5. Stand mounting screw
6. Brio
Figure 4 – VESA 2 Mounting Brackets
3. Attach the unit to the bracket using the four small screws (8-32 x 3/8) provided with the
bracket.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
48
Cable and Power Connections and Status LED
All of the connections for Brio are on the back of the unit.
The front of the unit has a status LED.
Figure 5 - Front View
When the LED indicator on the front of the unit is solid green, the unit is ready. The LED flashes when
the unit is powering on.
Figure 6 – Back View
 All connections to the unit should be connected before starting Brio.
The connectors include the following:
Table 1 — Power and Cable Connectors
Callout
Connector
Label
Power Cord
Connector
None
Graphic
Usage
Connects the unit to a power source.
1
Pushbutton
Power Switch
Powers the unit on and off.
10
DVI-I Video
Female
Connector
(blue)
None
Only used when working with support personnel.
Otherwise, this connector should not be used.
2
1000BASE-T
Ethernet
Connector
Network 1
Connects Brio to the primary network.
The yellow LED is an activity LED that blinks when
there is Ethernet activity.
The green LED is on when a link is established at
1000Mbps. Otherwise it is off.
3
Dual USB
Connectors
1
Connects USB-compatible devices to the unit.
2
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
49
Table 1 — Power and Cable Connectors
Callout
Connector
Label
4
Audio
Connectors
In A (1 black, 1
blue)
Line Out (1
orange, 1 green)
In B (1 pink)
Graphic
Usage
Connects audio to the unit.
Black
In A
Currently not used.
Blue
In A
Connects the audio for the source
connected to the Input A connector on
the unit.
Orange
Line Out
Currently not used.
Green
Line Out
Plays audio from one of the sources.
Pink
In B
Connects the audio for the source
connected to the Input B connector.
5
Dual DVI-I
Video Female
Connectors
Input A and B
Connects DVI Input sources to Brio.
6
Dual DVI-I
Video Female
Connectors
Output A and B
Connects displays to Brio.
7
RJ45
Connectors
Currently capped and not used. Reserved for future
use.
8
Dual USB Mini
Connectors
Currently capped and not used. Reserved for future
use.
9
1000BASE-T
Ethernet
Connector
Network 2
Connects Brio to the secondary network.
The yellow LED is an activity LED that blinks when
there is Ethernet activity.
The green LED is on when a link is established at
1000Mbps. Otherwise it is off.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
50
Periodic Maintenance
This section contains information on tasks that you should perform to maintain your unit.
The Brio does not have any user-serviceable internal parts. For issues not covered in
this document, or if you are having problems with your unit, contact the support center
(http://www.christiedigital.com/en-us/product-support/supportoffices/Pages/default.aspx)
Task
Schedule
Update software.
When advised
Remove any accumulated dust at the rear panel slots while the unit fans are running.
Periodically
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
51
Safety Precautions
The following are the safety precautions for Brio.
This symbol indicates the presence of “dangerous voltage” within the product enclosure
that may be significant enough to cause a risk of electrical shock.

Read, follow, and keep all instructions.

Follow all warnings and instructions marked on the product and in the related documentation.

Do not use this apparatus near liquids. Do not place objects containing liquids on top of or
near the unit. Never spill liquid of any kind on the product.

Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock.

Clean only with a clean, lint-free, and dry cloth. Do not use abrasive cleaners or solvents.

Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding–type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles (electrical receptacles), and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold
with the apparatus. When a cart is used, take caution when moving the cart/apparatus
combination to avoid injury or serious damage to the product from the cart tipping over.

If an extension cord is used with this product, make sure that the total ampere ratings on the
products plugged into the extension cord do not exceed the extension cord ampere rating.

Do not attempt to service this product yourself. Opening or removing covers may expose you
to dangerous voltage points and/or other risks, and may void your warranty. Refer all
servicing to Authorized Service Personnel.

Unplug the apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

Operate the equipment under the following conditions:

-
Operating temperature range: 5°C to 40°C (41°F to 104°F)
-
Storage temperature: -20°C to 60°C (-4°F to 140°F)
-
Relative humidity: 10-85% non-condensing
-
Operating altitude: maximum of 2000 m (6562 ft) above sea level
Avoid installing this product in an area that is exposed to excessive dust.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
53
Warnings
SBC Battery Warning
The battery in Brio is not intended to be replaced by the user. Failure to follow these instructions
voids the warranty of the unit.
There is danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type of battery.
Service Warning
The unit has no field-serviceable parts. The enclosure surrounding the unit should not be removed.
Failure to follow these instructions may void the warranty.
For protection against the risk of electrical shock, always disconnect all cables from the wall outlet
before servicing, modifying or installing the equipment.
Class I Construction Warning
An apparatus with Class I construction shall be connected to a MAINS socket outlet with a protective
earthing connection.
Labeling Glossary
Table 2 — Symbols
This symbol indicates the hardware is
RoHS compliant.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
These symbols warn where
potentially hazardous voltages
exist.
54
Product Compliance
The hardware has been tested and certified to be compliant as follows:
Table 3 — Compliance
Country
Mark
Australia
Country
Mark
Norway –
REACH
Canada
ROHS ll
China
Japan
Russia GOST-R
Korea
Saudi Arabia
No Marking
Requirement
South Africa
No Marking
Requirement
Kuwait
No Marking
Requirement
Member states
of the European
Union
Mexico
Ukraine
United States
End-of-Life Disposal
Properly recycle the Brio unit when it is permanently removed from service. This product has been
designed such that a large percentage of the product material can be recycled. Follow local and/or
national regulations regarding disposal of electronics equipment.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
55
Appendix A Brio Specifications
Brio
Network Streaming Appliance
Chassis
1U form factor
Optional mounting brackets (ears)
Optional under table mount
Optional VESA “sandwich” mount
Outputs
Inputs
Dual DL-DVI (digital only)
Up to 2560x1600 resolution per output
3.5 mm stereo audio
Analog stereo audio
Dual DL-DVI (digital only)
From 320x240 to 1920x1080 encoded to H.264
Support for HDCP (High-bandwidth Digital Content Protection)
Network
Dual 3.5 mm stereo audio
Analog stereo audio
Dual Gigabit Ethernet
1000 Mbps Ethernet, RJ45 connectors Support for IGMPv2, IPv4, IPv6,
RTSP, SRTP, HTTP, TCP/IP
Support for IGMPv2, IPv4, RTSP, SRTP, HTTP, TCP/IP
Encoding
2 high definition DVI inputs to L5 H.264 video streams at 30 FPS
2 stereo audio streams
Physical Specifications
(W x H x D) 17.40” x 1.74” x 9.5” (442x44x241mm)
6.5lbs. (2.95kg)
Power
100-240VAC 50-60Hz (auto-ranging power supply)
4-2A (max)
220W (max)
Reliability
Regulatory
safety
MTBF
750 BTU/hr (max)
>50,000 hours for major modules
 CAN/CSA C22.2 No. 60065
 UL 60065
 IEC 60065 emissions
 FCC CFR47, Part 15, Subpart B, Class A –unintentional radiators
 EN55103-1 Class A audio, video, audio-visual equipment emission; EN55103-2 audio video,
audio-visual equipment immunity; EN61000-3-2, EN61000-3-3
 Directives: (EC) 2011/65/EU (RoHS); 2012/19/EU (WEEE); Regulation (EC) No. 1907/2006
(REACH)
 Certification marks (check with Christie for latest update): cULus (Canada & US), CE (EU),
CCC (China),
 GoST-R (Russia), KC (Korea), S-Mark (Japan), C-Tick (Australia & New Zealand), Ukraine
Manufacturing
location
Warranty
Designed, manufactured, and tested by Christie Digital Systems Inc. at our facility in Phoenix,
Arizona, USA
Limited two years parts and labor.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
56
Appendix B Ports used by Brio
The following ports are used by Brio:
Port
Service
Description
Type
5297
AirPlay
Used for AirPlay.
TCP
7000
AirPlay
Used for AirPlay.
TCP
7100
AirPlay
Used for AirPlay.
TCP
8888
Application
TCP server runs at port 8888 on the local IP address.
TCP
11123
Brio to Brio
Communication
This connection maintains communication links between
Brios.
TCP
15000-17000
Brio to Brio
Communication
Brio to Brio meetings.
UDP/TCP
3689
DAAP
Used for AirPlay audio.
TCP
rd
11135
External Control
Server
Used for 3
party external control systems.
TCP
21
FTP
Used for automatic software updates.
TCP
80
HTTP
Used for the Meeting Manager and AirPlay.
TCP
443
HTTPS
Used for AirPlay.
TCP
49159
mDNS
Used for AirPlay. Requires multicast.
UDP
49163
mDNS
Used for AirPlay. Requires multicast.
UDP
5298
mDNS
Used for AirPlay.
UDP/TCP
5353
mDNS
Used for AirPlay. Requires multicast.
UDP
5354
mDNS
Used for AirPlay. Requires multicast.
UDP
3702
Multicast
Visible from IP 224.0.0.0 to 239.255.255.255.
UDP
Used for searching for Network Projector and AirPlay
sources.
5350
NAT Port Mapping
Used for AirPlay.
UDP
137
Netbios-ns
NetBIOS name service.
UDP
5363
net-projection
Used for Windows Network Projection.
UDP/TCP
36669-36999
RAOP (Remote
Audio Output
Protocol)
Used for AirPlay.
TCP
10000-17000
(video)
RTP
The RTP port defines a standardized packet format for
delivering audio and video over IP networks.
UDP
554
RTSP
RTSP is a network control protocol used for establishing
and controlling media sessions between the controller and
the source.
UDP/TCP
1900
SSDP
Used for AirPlay.
UDP
50100-50200
Unicast
Brio Screen Projector.
UDP/TCP
8888
Unicast
Microsoft Network Projector
HTTP/UDP/TCP
10001 (audio)
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
57
Appendix C Port Authority
Port Authority is a utility that helps system administrators check network settings. It provides
feedback to the administrator to help set up the network for Brio.
Port Authority performs the following:
 Checks if port 3702 is open.
 Checks if port 8888 is open.
 Writes an exception to your local windows firewall for traffic on port 3702 and port 8888.
 Checks if multicast is enabled.
If any of the above fail, a message pertaining to the status and a tip on how to proceed is shown in
the Status messages.
Detailed exception messages are displayed if any of the following occur:
 Network timeout exception
 Network disconnect
 Socket exception due to corrupted messaging
If everything is set up correctly with your network, you can use Port Authority to:

Select Connect to broadcast a network multicast discovery message.

Select Parse to retrieve a list of Brio IP addresses from the reply.

Select, and then test-connect to each of the Brio addresses to retrieve the Brio’s given name.
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
58
Index
accessory kit ............................................. 8
desk .....................................................45
adaptive streaming ................................... 40
monitor.................................................46
address book ............................................ 17
rack .....................................................45
administration .......................................... 35
VESA 1 kit .............................................46
altitude .................................................... 53
VESA 2 kit .............................................47
Android sources ........................................ 32
mounting options ......................................45
Apple sources ........................................... 30
Network Projection ....................................28
auto-show ................................................ 16
network tab ..............................................37
battery .................................................... 54
operating temperature ...............................53
Brio whiteboard ........................................ 33
periodic maintenance .................................51
cable connectors ....................................... 49
port authority ...........................................32
chassis .................................................... 56
ports .......................................................57
compliance ............................................... 55
power connectors ......................................49
connect
presentation area ......................................13
Android sources ..................................... 32
presenter .................................................21
Apple sources ........................................ 30
preview....................................................16
DVI sources .......................................... 26
primary output..........................................17
Network Projector .................................. 28
PtP connection ..........................................10
Windows OS sources .............................. 27
QoS .........................................................40
connect sources ........................................ 26
regulatory ................................................56
dimensions............................................... 56
relative humidity .......................................53
disposal ................................................... 55
reliability ..................................................56
DVI sources ............................................. 26
reorder sources .........................................16
general tab .............................................. 35
safety ......................................................56
hostname................................................. 40
safety precautions .....................................53
IP address ................................................ 12
security....................................................14
join meeting ............................................. 20
security tab ..............................................43
labeling ................................................... 54
set up ....................................................... 8
MAC OS X sources ..................................... 30
settings....................................................17
maintenance ............................................ 51
share presentation area .............................21
Meeting Manager ...................................... 11
show/hide ................................................16
meetings ................................................. 17
sketching .................................................33
mounting
software tab .............................................41
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
59
source list ................................................ 15
Web browsers ...........................................12
specifications ............................................ 56
Web whiteboard ........................................33
splash screen background .......................... 11
weight .....................................................56
storage temperature ................................. 53
welcome ................................................... 7
system settings page................................. 35
whiteboard ...............................................32
warnings .................................................. 54
whiteboard tools .......................................33
warranty .................................................. 56
Windows OS sources .................................27
Brio User Guide
020-101213-05 Rev. 1 (06-2014)
60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement