User Guide for Fixing Ties

User Guide for Fixing Ties
Cable Ties and Fixings
U s e r G u i d e f o r F i x i n g Ti e s
Application
Arrowhead
Fir Tree
Mount
䊉
䊉
Rivet Wall
Plug
Screw
Mount
EdgeClip
Weld Stud
Mount
1.8
Cable & Hose
Attachment
H max.
䊉
H max.
䊉
䊉
䊉
W max.
H max.
䊉
H max.
Arrowhead
䊉
䊉
This fixing tie is based on an arrowhead offering high extraction forces. The arrowhead is
securely in place when a click can be heard and felt by the user.
Arrowhead with disc
The disc minimises the ingress of dust, dirt and water. Furthermore a safe fixation inside the
drill hole is assured that withstands pressure from various directions.
Arrowhead with supporting legs
Arrowhead fixings with supporting legs offer good and stable fixation in drilled holes. The
supporting legs generate additional pressure to assure a firm and secure fixing while taking
up any variation in panel thickness. These ties are also suitable in high vibration applications.
Arrowhead without supporting legs
The arrowhead design assures good fixation while utilising lowest possible space.
Fir Tree Mount
Fir Tree Mounts can be pushed into pre-punched holes easily in panels or threaded, blind
holes based on the low insertion forces. The design is ideally suited for a wide range of
sheet thicknesses. The disc on top of the fir tree covers the hole and minimises the ingress
of dust, dirt and water.
Date of issue: April 2011
121
1.8
Cable Ties and Fixings
U s e r G u i d e f o r F i x i n g Ti e s
EdgeClip
The EdgeClips are specifically designed to bundle and guide cable and wires on edges. Cost
intensive drill holes for fixing are no longer required. EdgeClips are easily mounted by hand,
the integrated metal clamp, securely keeping the clips on the edge.
EdgeClip twistable
Ideally suited for fixations where bundles need to be flexibly guided. Theses EdgeClips are
available with facilities for 90° or 360° rotation.
EdgeClip without metal clamp
These EdgeClips are easily attached. The holding tap snaps into the drill hole securely.
Weld Stud
Mount
Various of the HellermannTyton weld stud mounts can easily be attached by hand (″soft
push″) the design offers very low insertion forces that require no tools. The mounts can be
removed by twisting to the left.
SB9 and SB14 are based on ″hard push″ technology and require a hammer to be applied.
Weld Stud Fixings with lateral adjustment
The special oval shape of these mounts provides a 5-6 mm lateral adjustment to cater for
any misalignment of the stud or incorrect positioning of ties on the cables. The bundle can
therefore be moved when mounted.
122
Cable & Hose
Attachment
Excellent solution for subsequent attachment of pipes and wires to installed tubes.
Rivet Wall Plug
Can be fixed to brick, cement or wood. Knocking the peg inside will spread the wings of
the rivet and securely fasten it inside the hole. A tool is recommended for application.
Screw Mount
These fixing ties can be attached to any surface with a screw or bolt. The maximum panel
thickness is based on used screws offering high grade of flexibility. The tensioning force is
related to the tensioning level of the screw allowing very strong or loose fixations.
Two Piece
Fixing Ties with
Clip Coupler
The Coupler is an article to connect two cable ties maximum for parallel bundling of tubes,
harnesses or cables. Its design enables the cable ties to rotate up to 90° and allows flexible
installations.
Date of issue: April 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement