RESPONSE PAGING SYSTEM PAGER USER GUIDE

RESPONSE PAGING SYSTEM PAGER USER GUIDE
by Honeywell
RESPONSE PAGING SYSTEM
PAGER USER GUIDE
by Honeywell
Turning On the Pager
Press and hold
for 2 seconds, the pager will then display the standby screen.
After a short time the pager screen will go blank to preserve the battery, press any key to return to the
standby screen.
Turning Off the pager
Go to the standby screen, press
Press
or
keys to select the ‘Turn Off’ menu.
twice to confirm your choice.
Read Messages
To read a stored message, press
Use
or
from the standby screen.
to scroll through the messages. Each message is allocated a slot number (i.e.
01, 02, 03 etc)
For messages that are longer than the two lines or to read the time and date of the message
press
You will automatically return to the standby screen.
Deleting Messages
Display the message to be deleted, hold
To delete a single message use the
To delete all Messages use
for 2 seconds to view the delete menu.
to select ‘DEL’, press
to select ‘D.ALL’, press
You will automatically return to the standby screen.
to Confirm Delete Message.
to Confirm Delete Message.
by Honeywell
Set Alert
From the standby menu press
Press
or
to select the ‘Set Alert’ menu.
to confirm your option. Use the
or
to select option (Vibrate/Tone/Vibe &
Tone/Silent)
Press
to confirm your change.
Set Date & Time
From the standby menu press
Press
or
to select the ‘Date & Time menu.
to confirm your option. Use the
or
to select correct data, press
confirm each selection.
Press
to confirm your change.
Icons
Pager on
Low Battery
Message locked
Beeping Alert
Vibrate Alert
Unacknowledged message
Out of range indicator
Daily Alarm ON
Melody
Current message is a duplicate
Message continues on next page
to
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement