LG-Ericsson LDP-7016D User manual
Add to my manuals
48 Pages
The LG-Ericsson LDP-7016D is a feature-rich digital keyset with a user-friendly interface that offers flexible call handling and advanced telephony features for enhanced communication. It features a sleek design with a multi-level LCD display, 16 programmable buttons with dual-color LEDs, and an additional device port for connecting peripherals like a headset or a fax machine. With its 3 soft buttons and navigation key, you can easily access various call functions and navigate through the intuitive menu options.
advertisement
Important Safety Information
3
Important Safety Information
4
Important Safety Information
5
Table of Contents
Getting Started
LDP-7000 Series Model 7016D & 7024D
Input / Output Devices and Button
Cable Connection
ADP (Additional Device Port)
Placing or answering a call
1. Placing a call
2. Answering a call
3 Soft Button & Navigation Button
Basic Function
1. Idle
1.1 Pickup
1.2 Conference
1.3 Redial
2. Off Hook
3. Intercom Dialing
4. Intercom Ring Back
5. Intercom Busy
6. Intercom Do Not Disturb
7. Intercom Dialing Error
8. Intercom Receiving
9. Intercom Talk
10. CO Line Busy
11. CO Dialing / CO Talk
12. Checking messages
13.Paging
Call Log
1. Received Call
2. Dialed Call
3. Lost Call
3.1 Answer
3.2 Del Cur (Delete Current)
3.3 Del All (Delete All)
3.4 Save
3.5 Name/Tel
6
14
14
14
15
9
11
12
8
8
22
22
23
24
24
24
25
25
25
19
20
20
20
19
19
19
19
21
21
16
16
16
17
18
18
18
Table of Contents
Menu
1. Basic Program
1.1 Station name program
1.2 Ring program
1.2.1 Select Ring
1.2.2 Select melody
1.3 Mode (H/T/P) Program
1.4 Password Program
1.4.1 Password Register
1.4.2 Password Change
1.5 Language Program
1.6 ENBLOCK Mode Program
2. Advanced Program
2.1 Wake up Program
2.1.1 Setting
2.1.2 Canceling
2.2 Pre-selected MSG PGM
2.2.1 Select the MSG PGM
2.2.2 Canceling/ Changing
2.3 Station COS Program
2.3.1 COS Down Mode
2.3.2 Restoring COS Mode
2.3.3 Walking COS Mode
2.4 SPK/Headset Program
2.5 EAR MIC Program
3. Speed Program
4. Mobile Extension PGM
4.1 Mobile-EXT. NUM PGM
4.2 Mobile-EXT Enable
5. Conference Room PGM
5.1 Create CONF Room
5.2 Delete CONF Room
6. Hot Desk Program
6.1 Hot Desk Log in
6.2 Hot Desk Log out
Phone Book
1. Dial By ICM Name
2. Dial By STA SPD name
3. Dial By SYS SPD Name
Entering characters
Glossary of Terms
7
47
47
48
48
49
43
43
44
44
44
41
41
42
43
37
38
38
39
40
34
35
36
36
45
45
46
31
31
32
33
33
34
34
26
27
27
28
29
29
30
50
Getting Started
LDP-7000 Series, Model 7016D & 7024D
LDP-7016D/7024D are advanced, user-friendly digital keysets, offering the convenience of 3 soft buttons and a navigation key.
• Features
-.Trendy and Stylish LDP Family design
-.Multi Level 3 Line LCD (3 x 24)
-.16 or 24 Flexible buttons with dual-color LED’s
-.Additional Device Port (ADP) for SLT or FAX
-.Call Log Feature
-.Call Recording Feature – 7024D only (Optional USB Module).
-.Hands-Free Solution – 7024D only (Optional Blue- Tooth Module).
-.Wall Mountable (Bracket Optional)
LDP-7016D
LDP-7024D
8
Getting Started
Input / Output Devices and Buttons
1
2
3
4
5
6
7
3
4
1
2
5
6
7
8
9
Handset
Headphone
(Ear/Mic Mode)
Speaker
Speed Button
Dnd/Fwd Button
Speaker Button
Hold/Save Button
3 Soft Button
LCD Display
9
10
11
12
13
14
15
16
17
Visual Ring LED
Trans/Pgm Button
Flexible Button (Loop Button)
Call back Button
Volume Button
Handsfree Microphone
Menu Button
Phonebook Button
(Same operate as ‘Speed’)
15
16
17
11
12
13
14
8
9
10
Getting Started
3
4
1
2
5
13
14
15
16
10
11
12
8
9
6
7
17
Handset
Headphone Socket
Speaker
Speed Button
Dnd/Fwd Button
Speaker Button
Hold/Save Button
3 Soft Buttons
LCD Display
Visual Ringing LED
Used for handset call.
Used to connect optional headset to the phone.
Outputs tones and voice.
Used to access speed dialing, speed programming, save number redial, and last number redial.
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active, the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or voicemail. When call forward is activated, the red LED flashes.
Speaker toggles the speakerphone state, and the red LED is illuminated when the speakerphone is active.
This button is used to put a call on hold or save information when programming.
Used in conjunction with fixed and flexible features, and the function changes in relation to call progress, as indicated on the LCD display.
Displays information about telephone status, dialing directories,and test message information.
Illuminates when the phone is ringing.
Trans/PGM Button
Flexible Button
Call back Button
Volume Button
This button is used to initiate a call transfer (TRS) or to enter programming mode (PGM)
Some flexible buttons are pre-programmed in the system for line appearances, loop functions etc. The remaining flexible buttons can be user-programmed.
A station can initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled.
The volume button adjusts the audio levels for ringing, handset and speakerphone functions.
Microphone is used for hands-free speakerphone function.
Handsfree
Microphone
Menu Button
Phonebook Button
The menu button is used to move to the desired option(Dial, MSG,
Program), and to select the next screen when indicated by an arrow on the LCD display.
Used to access speed dialing, save number redial, and last number redial, and to access flexible button programming.
10
Getting Started
Cable Connection
B
C
A
Cable connections
A - Connect the telephone cord (curly cord) to the handset and the other end to the
handset jack at the bottom of the telephone.
B - Connect the line cable to the port at the bottom of telephone and the other end to the
wall socket.
C - Connect the Headphone to the headphone jack on the left side of the telephone.
(As viewed from the front.)
11
Getting Started
ADP (Additional Device Port)
12
Getting Started
ADP (Additional Device Port)
13
Getting Started
1. Placing a Call
ICM Line
CO Line
Lift handset or
Lift handset or
▶ ▶
Enter the extension number talk
▶
Dial 9 or select
CO line flexible button.
▶ ▶ talk
Enter the desired phone number
2. Answering an Outside Call
ICM Line
or
▶ talk
Lift handset
CO Line
or
▶
Press flashing
CO line button or loop key.
▶
Lift handset
14 talk
3 Soft Buttons & Navigation Button
3 Soft Button
The 3 Soft Buttons are located on the bottom of the LCD display. The function of each button changes, subject to call status and progress. The current functions are displayed on the LCD screen, directly above each button. For example, if the user calls a busy extension, busy tone will be heard and the busy status displayed. The LCD screen will display the busy message along with the different options available - “Message Wait”, “Camp-On” and “Flash”. By pressing the relevant button the desired feature is activated.
※ Note : In the descriptions following, the symbol
₪ indicates that the same LCD display icon changes (or toggles) on activation.
BUSY : STA 100
[CALLBK] CAMP(*) STEP
MSG CAMP-ON FLASH
Navigation Button
In some instances, more than 3 current functions are available to the user, and this is indicated by the appearance of a left (
I) or right (J) arrow in the LCD screen, (see below). By pressing the navigation key (located below the volume button), in the direction corresponding to the arrow, any additional functions will be displayed.
STATION 100 (T)
FEB 01 04 05:34 pm
FWD CONF REDIAL →
STATION 100 (T)
FEB 01 04 05:34 pm
← ICM
15
Basic Function
By pressing one of the 3 soft buttons you are able to select the indicated function. For instance, if you want to select call pickup (as shown below), press the first button on the left. If there are more than three functions available at any point, an arrow will be displayed on the LCD display. Use the navigation key to move the next or previous screen to display additional functions.
1. Idle
3 Soft Buttons are located below the LCD display.
STATION 100 (T)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
PICKUP : press to pickup a call ringing within the same pickup group.
CONF : press to initiate & activate a conference.
REDIAL : press to redial last number called.
1.1 Pickup
A station can pickup a call ringing to an unattended station within the same pickup group by using the pickup procedure.
* Refer to
Aria IP system & Aria system programming manual.
STATION 100 (T)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
Press [PICKUP] button.
CALL TO STA 104
FROM 100 05:37pm
TRANS CONF MUTE
Talk
16
Basic Function
1.2 Conference
CALL TO STA 100
FEB 01 04 05:34 pm
MSG FLASH
Dial the desired station number.
(e.g.100)
Station 100 answers the call.
CALL TO STA 100
FEB 01 04 05:34 pm
TRANS CONF MUTE
Press [CONF] button.
CONFERENCE
FEB 01 04 05:34 pm
FWD CONF REDIAL →
Dial the phone number of the next desired station.
(e.g.104)
CALL TO STA 104
FEB 01 04 05:34pm
MSG FLASH
Station 104 answers the call.
CALL TO STA 104
FEB 01 04 05:34 pm
TRANS CONF MUTE
Press the [CONF] button twice.
CONFERENCE
FEB 01 04 05:34 pm
CONF MUTE
A 3-party conference is now established.
17
Basic Function
1.3 Redial
STATION 100 (T)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
Press the [REDIAL] button.
>123456789
BACK NEXT SEND
Press the [NEXT] button and repeat until the Desired number appears, then press [SEND] button to call.
123456789
LINE 008 00:00:10
TRANS CONF MUTE →
Talk
2. Off Hook
STATION 100 (T)
FEB 01 04 05:34 pm
FWD CONF REDIAL→
FWD
: Press the [FWD] button to forward calls to another station, Voicemail etc.
CONF : Press the [CONF] button to initiate a conference call.
REDIAL : Press the [REDIAL] button to call last number dialed.
STATION 100 (T)
FEB 01 04 05:34 pm
← ICM
ICM : If, while on a call, ICM call is received, press the [ICM] button to place 1 st call on hold and answer 2 nd call.
3. Intercom Dialing
STATION 100 (T)
FEB 01 04 05:34 pm
FLASH
FLASH : If you wish to terminate an ICM call and make another call, press [FLASH] to re-seize dial tone.
18
Basic Function
4. Intercom Ring Back
CALL TO STA 100
FEB 01 04 05:34 pm
MSG FLASH
MSG
: Press to leave a your station number or message.
FLASH : Press to disconnect the line and re-seize.
5. Intercom Busy
BUSY : STA 100
[CALLBK] CAMP ( * ) STEP
MSG CAMP-ON FLASH
MSG : Press to leave your station number or message.
CAMP-ON : Press to send a call waiting tone to a busy station
(indicating that they have a call waiting).
FLASH : Press to disconnect the line and re-seize.
6. Intercom Do Not Disturb
DO NOT DISTURB STA 100
CALLBK FLASH
CALLBK : Press leave a call back request or message.
FLASH : Press to disconnect the line and re-seize.
7. Intercom Dialing Error
INVALID
FEB 01 04 05:34 pm
FLASH
FLASH : Press to disconnect the line and re-seize.
8. Intercom Receiving
CALL FROM STA 104
FEB 01 04 05:34 pm
DND
DND : press to block all incoming calls. (Do Not Disturb)
19
Basic Function
9. Intercom Talk
CALL FROM STA 104
FEB 01 04 05:34 pm
TRANS CONF MUTE
TRANS : Press to transfer an incoming call to another station.
CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone, or headset microphone. Press the [SPEAK] button to re- activate microphone.
10. CO Line Busy
CO LINE 001 BUSY
QUEUING ([CALLBK])
CALLBK
CALLBK : If, after dialing ‘9’ for a CO line, busy tone indicates no lines are available, press [CALLBK] to reserve a CO line.
11. CO Dialing/CO Talk
123456789
LINE 125 00:00:03
TRANS CONF MUTE →
TRANS : Press to transfer an incoming call to another station.
CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone, or headset microphone. Press the [SPEAK] button to re- activate microphone.
123456789
LINE 125 00:00:03
← RECORD FLASH ACNR
RECORD : Press to record the current conversation. (if fitted)
FLASH : Press to disconnect the line and re-seize.
ACNR : Press to set automatic called number redial.
20
Basic Function
12. Checking messages
VMIB MSG FROM EXTERNAL
NEXT REPEAT DELETE →
NEXT : Press to move to the next message.
REPEAT : Press to repeat the current message.
DELETE : Press to erase the current message.
VMIB MSG FROM EXTERNAL
← ADD REWIND CALLBK
ADD : press to tag the current message with your comment before forwarding. Record your comments & then dial the required station number to complete the transfer.
REWIND : press momentarily to repeat part of current message.
CALLBK : press to leave a call back request.
13. Paging
PAGE FROM STA 103
20 AUG 04 11:51am
MEET ME
MEET ME : press to answer a paging request.
21
Call Log
Call Log Button PGM : PGM + Flexible + PGM ’57’
Press the [Call Log] button.
1
RECEIVED CALL
2. DIALED CALL
OK
RECEIVED CALL : Received call list *
DIALED CALL
: Dialed call list
1
LOST CALL
OK
∧
LOST CALL : Missed call list*
* CLI (Calling Line ID) mandatory.
1. Received Call
1
RECEIVED CALL
2. DIALED CALL
OK
Press [OK] or button.
123456789
02/01 09:02
BACK OK
Press [OK] or button.
123456789
LINE 125 00:00:03
TRANS CONF MUTE →
NOTE
BACK
Return to the previous
22
Call Log
2. Dialed Call
1. RECEIVED CALL
2
DIALED CALL
OK
Press [OK] or button.
123456789
02/01 09:02
BACK OK
Press [OK] or button.
123456789
LINE 125 00:00:03
TRANS CONF MUTE →
BACK
Return to the previous
23
Call Log
3. Lost Call
3
LOST CALL
OK
∧
Press [OK] or button.
0123456789
03/10 16:02 CNT :01
BACK SELECT> ANSWER
Press the [SELECT] button to select the following functions : ANSWER, DEL CUR (delete current)
,
DEL ALL (delete all), SAVE, NAME/TEL
3.1 ANSWER
0123456789
03/10 16:02 CNT :01
BACK SELECT > ANSWER
0123456789
LINE XXX 00:00:03
TRANS CONF MUTE →
Press [ANSWER] to call the displayed number.
3.2 DEL CUR
0123456789
03/10 16:02 CNT :01
BACK SELECT > DEL CUR
STATION 100 (T)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
Press [DEL CUR] to erase current number.
BACK
Return to the previous
24
Call Log
3.3 DEL ALL
0123456789
14/07 16:02 CNT :01
BACK SELECT > DEL ALL
Press [SELECT] until [DEL ALL] appears in display.
Press [DEL ALL] to initiate ‘delete all’ function.
ALL CLI DELETE
Press HOLD Key
BACK SELECT > DEL ALL
Press the [HOLD] button to confirm ‘delete all’ function.
All numbers are erased.
3.4 SAVE
0123456789
03/10 16:02 CNT :01
BACK SELECT > SAVE
To save CLI, press [SAVE] button.
ENTER SPD BIN NO (000)
CLI MSG USED
PAUSE FLASH D-TONE
Press [HOLD] or button, speed dial is registered.
※ See the page 42.
3.5 NAME/TEL
0123456789
03/10 16:02 CNT :01
BACK SELECT > NAME/TEL
To check the name of the selected number, press the [NAME/TEL] button.
EDWARD
03/10 16:02 CNT :01
BACK SELECT > NAME/TEL
OR if a name is displayed, to check the associated number, press the [NAME/TEL] button.
BACK
Return to the previous
25
Menu
1
BASIC PROGRAM
2. ADVANCED PROGRAM
OK
Press the [Menu] button.
Press the [Navigation] button.
Press the [Navigation] button.
Press the [Navigation] button.
Press the [Navigation] button.
1. BASIC PROGRAM
2
ADVANCED PROGRAM
OK
3
SPEED PROGRAM
4. MOBILE EXTENSION PGM
OK
3. SPEED PROGRAM
4
MOBILE EXTENSION PGM
OK
5 CONFERENCE ROOM PGM
6. HOT DESK PROGRAM
OK
5. CONFERENCE ROMM PGM
6 HOT DESK PROGRAM ∧
OK
Press the [Navigation] button.
BACK
Return to the previous
※
CONFERENCE ROOM is not available in Aria-24ip.
26
Menu
1. BASIC PROGRAM
Press the [MENU] button.
1
BASIC PROGRAM
2. ADVANCED PROGRAM
OK
Press [OK] or button.
1.1 STATION NAME PROGRAM
1
STATION NAME PROGRAM
2. RING PROGRAM
BACK OK
Press [OK] or button.
ENTER NAME ( )
BACK OK
Enter the name.
※ For detailed information about entering name, see the page 49.
27
Menu
1.2 RING PROGRAM
1. STATION NAME PROGRAM
1 . RING PROGRAM
BACK OK
Press [OK] or button.
1 ICM RING
2. ICM MELODY
BACK OK
Press [Navigation] button.
1. ICM RING
2
ICM MELODY
BACK OK
Press [Navigation] button.
Press [Navigation] button.
3
CO RING
4. CO MELODY ∧
BACK OK
3. CO RING
4 CO MELODY ∧
BACK OK
Press [Navigation] button.
28
Menu
1.2.1 Select Ring
1
ICM RING
2. ICM MELODY
BACK OK
Press [OK] or button.
RING TYPE : 01 (01-15)
SELECT BY [NEXT]
BACK NEXT OK
Step using [NEXT] or button to select the ring.
RING TYPE : 02 (01-15)
SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button. The selected ring type is saved.
※ Use same procedure to select CO Ring type.
1.2.2 Select Melody
1. ICM RING
1
ICM MELODY
BACK OK
Press [OK] or button.
CATEGORY SEARCH
← Pleasure (10) →
EXIT OK
Use button to select category.
※ Press the [EXIT] button to cancel.
Pleasure(10)
← [01] Cancan →
BACK EXIT OK
Use button to select the desired melody.
Press the [OK] or button and then the melody is changed.
※ Use same procedure to select CO Melody.
Note : To set the melody, MFU and MU board is required.
29
Menu
1.3 MODE(H/T/P) PROGRAM
1
MODE(H/T/P) PROGRAM
4. PASSWORD PROGRAM
BACK OK
Press the [OK] or button.
TONE MODE
SELECT BY [NEXT]
BACK NEXT OK
Press [NEXT] or button to select the mode.
※ There are three types as follows;
-. HANDSFREE MODE
-. TONE MODE
-. PRIVATE MODE
PRIVATE MODE
SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button.
STATION 100 (P)
FEB 01 04 05:34 pm
PICKUP CONF REDIAL
The selected mode is saved.
NOTE
PRIVATE
You will hear three bursts of tone and an announcement.
Reply hands-free or lift handset for privacy. The calling party can hear any conversation in progress.
HANDSFREE
You will hear repeated bursts of intercom ring tone and the HOLD button slow flashes. Lift the handset or press the SPEAKER button to answer.
TONE
You will hear three bursts of tone and one-way announcement.
The calling party cannot hear any conversation in progress
30
Menu
1.4 PASSWORD PROGRAM
3. MODE(H/T/P) PROGRAM
1
PASSWORD PROGRAM
BACK OK
Press [OK] or button.
1.4.1 PASSWORD REGISTER
> PASSWORD REGISTER
SELECT BY [NEXT]
BACK NEXT OK
Use [Next] or button to select the password register.
Then press [OK] or button.
ENTER PASSWORD :
BACK
Enter password. (5 digits) e.g.) 55555
PRESS OK KEY
BACK OK
Press [OK] or button.
31
Menu
1.4.2 PASSWORD CHANGE
> PASSWORD CHANGE
SELECT BY [NEXT]
BACK NEXT OK
Use [Next] or button to select the password change.
Then press [OK] or button.
ENTER CURRENT PASSWORD
Enter the current password. (5 digits) e.g.) 55555
BACK
ENTER PASSWORD :
BACK
Enter the new password. (5 digits) e.g.) 33333
PRESS OK KEY
BACK OK
Press [OK] or button.
32
Menu
1.5 LANGUAGE PROGRAM
1
LANGUAGE PROGRAM
6. ENBLOCK MODE ∧
BACK OK
Press [OK] or button.
> ENGLISH
LCD LANGUAGE
BACK NEXT OK
Use [NEXT] or button to select language.
> KOREAN
LCD LANGUAGE
BACK NEXT OK
Press [OK] or button.
1.6 ENBLOCK MODE PROGRAM
5. LANGUAGE PROGRAM
1 ENBLOCK MODE ∧
BACK OK
Press [OK] or button.
ENBLOCK MODE
> OFF
BACK NEXT OK
Use [NEXT] or button to select ON/OFF.
ENBLOCK MODE
> ON
BACK NEXT OK
Press [OK] or button.
33
Menu
2. ADVANCED PROGRAM
1. BASIC PROGRAM
1 ADVANCED PROGRAM
OK
Press [OK] or button.
Press [MENU] button.
2.1 WAKE UP PROGRAM
2.1.1 Setting
1
WAKE UP PROGRAM
2. PRESELECTED MSG PGM
BACK OK
Press [OK] or button.
ENTER YOUR WAKEUP TIME
HH:MM 10:10 am
BACK ERASE OK
Enter the time and select single time or every day.
-S:Single (once only - Default)
-C:Every Day ( # )
* Set the time : 24 hr format
• e.g. :7am = 07:00
:7pm = 19:00
ENTER YOUR WAKEUP TIME
07:00-C 10:00am
BACK ERASE OK
Press [OK] or button.
STATION 100 (T)
FEB 01 04 *10:34 pm
PICKUP CONF REDIAL
Flashing [*] preceding time indicates alarm set.
WAKEUP RING
FEB 01 05 *07:00 am
The alarm will sound at the pre-set time.
34
Menu
2.1.2 Canceling
1
WAKE UP PROGRAM
2. PRESELECTED MSG PGM
BACK OK
Press [OK] or button.
ENTER YOUR WAKEUP TIME
07 : 00-S *10:34 pm
BACK ERASE OK
Press [ERASE] button.
ERASED WAKEUP TIME
07 : 00-S *10:34 pm
BACK ERASE OK
Press [OK] or button.
35
Menu
2.2 PRESELECTED MSG PGM
2.2.1 Select the MSG PGM
1. WAKE UP PROGRAM
1
PRESELECTED MSG PGM
BACK OK
Press [OK] or button.
SELECT BY UP/DOWN KEY
BACK
Use or button to select the desired type.
OUT OF OFFICE
RETURN AT TIME XX:XX
BACK OK
Press [OK] or button.
ENTER TIME
HH:MM
BACK
Enter the time (24 hr format) e.g.) 07:30 am
Î enter 0730.
07:30 pm
Î enter 1930.
ENTER TIME
07:30 PRESS OK KEY
BACK P.DVU OK
Press [OK] or button.
OUT OF OFFICE
RETURN AT TIME 07:30
PICKUP CONF REDIAL
The selected message is displayed.
36
Menu
2.2 PRESELECTED MSG PGM
2.2.2 Canceling / Changing
1. WAKE UP PROGRAM
2 . PRESELECTED MSG PGM
BACK OK
Press [OK] or button.
OUT OF OFFICE
RETURN AT TIME XX:XX
BACK ERASE OK
Press [ERASE] button to cancel the pre-selected message and return to the[Message select mode].
※ Press [BACK] button to return to the previous LCD screen.
※ Press [OK] button to return to the [enter time mode].
SELECT BY UP/DOWN KEY
BACK
[Message select mode]
THE PRESELECTED MESSAGE TYPE
0 0 USER CUSTOM MSG 00
0 1 LUNCH RETURN AT XX:XX
0 2 ON VACATION / RETURN AT DATE XX:XX
0 3 OUT OF OFFICE/ RERURN AT TIME XX:XX
0 4 OUT OF OFFICE/ RETURN AT DATE XX:XX
0 5 OUT OF OFFICE/ RETURN UNKNOWN
0 6 CALL TO (PHONE NO : Max. 17 digits)
0 7 IN OFFICE STA ***
0 8 IN A MEETING / RETURN AT TIME XX:XX
0 9 AT HOME
1 0 AT BRANCH OFFICE
37
Menu
2.3 STATION COS PROGRAM
1
STATION COS PROGRAM
4. SPK/HEADSET PROGRAM
BACK OK
Press [OK] or button.
※ To activate STA COS (Station Class Of Service), password is required.
2.3.1 COS DOWN MODE
> COS DOWN MODE
SELECT BY [NEXT]
BACK NEXT OK
Use [NEXT] or button to select the
COS DOWN MODE.
Press [OK] or button.
※ There are three types as follows;
-. COS DOWN MODE
-. RESTORE COS MODE
-. WALKING COS MODE
> COS DOWN MODE
ICM ONLY MODE
BACK OK
Press [OK] or button and then the mode is changed.
38
Menu
2.3.2 RESTORING COS MODE
> RESTORE COS MODE
SELECT BY [NEXT]
BACK NEXT OK
Use [NEXT] or button to select the RESTORE COS MODE.
Press [OK] or button.
ENTER CURRENT PASSWORD
Enter the password (5 digits)to change
RESTORE COS MODE.
BACK
ORIGINAL COS RESTORED
PRESS OK KEY
BACK OK
Press [OK] or button.
39
Menu
2.3.3 WALKING COS MODE
> WALKING COS MODE
SELECT BY [NEXT]
BACK NEXT OK
Use [NEXT] or button to select the WALKING
COS MODE.
Press [OK] or button.
ENTER COS OVERRIDE CODE
BACK
Enter the COS Override code
(Password - 5 digits) e.g.- 12345
ENTER COS OVERRIDE CODE
PRESS OK KEY
BACK OK
Press [OK] or button.
40
Menu
2.4 SPK/HEADSET PROGRAM
3. STATION COS PROGRAM
1 SPK/HEADSET PROGRAM
BACK OK
Press [OK] or button.
SPEAKER MODE
SELECT BY [NEXT]
BACK NEXT OK
Use [NEXT] or button to toggle the mode.
※ There are two types as follows;
-. SPEAKER MODE
-. HEADSET MODE
SPEAKER MODE
SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button to save selected mode.
2.5 EAR MIC PROGRAM
1 EAR MIC PROGRAM
BACK OK
∧
Press [OK] or button.
EAR-MIC HEADSET
> ON
BACK NEXT OK
Use [NEXT] or button to select the ON/OFF.
EAR-MIC HEADSET
> OFF
BACK NEXT OK
Press [OK] or button.
41
Menu
3. SPEED PROGRAM
Press [MENU] button.
1 SPEED PROGRAM
4. MOBILE EXTENSION PGM
OK
Press [OK] or button.
ENTER SPD BIN NO(000)
BACK
Enter the speed bin number.
e.g.)007
>
ENTER CO-BTN/DIGIT (007)
BACK DELETE
Enter the phone number.
e.g.)123456789
Press [DELETE] button to delete speed bin number.
>123456789
SPEED 007
BACK OK
Then press [OK] or button.
>
ENTER NAME (SPD 007)
BACK OK
Enter the name.
※ See page 49 for details.
> ABC
ENTER NAME (SPD 007)
BACK OK
Then press [OK] or button.
42
Menu
4. MOBILE EXTENSION PGM
3. SPEED PROGRAM
1 MOBILE EXTENSION PGM
OK
Press [MENU] button.
Press [OK] or button.
* Refer to
Aria IP system & Aria system programming manual.
4.1 MOBILE-EXT. NUM PGM
1 . MOBILE-EXT. NUM PGM
2. MOBILE-EXT. ENABLE ∧
BACK OK
Press [OK] or button.
> 123456789
MOBILE EXT TEL NO.
BACK OK
Enter the mobile number.
e.g.)2222222
> 2222222
MOBILE EXT TEL NO.
BACK OK
Press [OK] or button.
4.2 MOBILE-EXT ENALBLE
1. MOBILE-EXT. NUM PGM
2 . MOBILE-EXT. ENABLE ∧
BACK OK
Press [OK] or button.
MOBILE EXT. USAGE
> OFF
BACK NEXT OK
Use [NEXT] or button to toggle ON/OFF.
MOBILE EXT. USAGE
> ON
BACK NEXT OK
Press [OK] or button.
43
Menu
5. CONFERENCE ROOM PGM
※
CONFERENCE ROOM is not available in Aria-24ip.
1
CONFERENCE ROOM PGM
6. HOT DESK PROGRAM ∧
OK
Press [MENU] button.
5.1 CREATE CONF ROOM
Press [OK] or button.
1.
CREATE CONF ROOM
2. DELETE CONF ROOM ∧
BACK OK
Press [OK] or button.
DIAL NO(1-9) AND PASSWD
BACK OK
Enter conference room number and password.
e.g.) 9 + 12345
PRESS OK KEY
BACK OK
Press [OK] or button.
5.2 DELETE CONF ROOM
1. CREATE CONF ROOM
2 . DELETE CONF ROOM ∧
BACK OK
Press [OK] or button.
DIAL NO(1-9) AND PASSWD
BACK OK
Enter conference room number and password.
e.g.) 9 + 12345
PRESS OK KEY
BACK OK
Press [OK] or button.
44
Menu
6. HOT DESK PROGRAM
5. CONFERENCE ROOM PGM
1 HOT DESK PROGRAM ∧
OK
Press [MENU] button.
Press [OK] or button.
* Refer to
Aria IP system & Aria system programming manual.
6.1 HOT DESK LOG IN
1.
HOT DESK LOG IN
2. HOT DESK LOG OUT ∧
BACK OK
Press [OK] or button.
DUMMY STATION 100
ENTER PASSWORD :
Enter password.(5 digits) e.g.)55555
STATION 217 (T)
06 SEP 04 04:00pm
PICKUP CONF REDIAL
45
Menu
6.2 HOT DESK LOG OUT
1. HOT DESK LOG IN
2.
HOT DESK LOG OUT ∧
BACK OK
Press [OK] or button.
AGENT LOGOUT WITH
NO FORWARD SET ?
DUMMY STATION 222
09 SEP 04 10:43am
PICKUP CONF REDIAL
Use button or button to select forward type and then Press [OK] or button.
※ Forward type
- NO FORWARD SET
- FORWARD TO VMIB
- FORWARD TO NM…
- FORWARD TO SPD000
- FORWARD TO MOBILE-EXT
- FORWARD TO STA…
46
Phone Book
[PHONE BOOK] and [DIAL: BY NAME] are the same feature.
1. DIAL BY ICM NAME
2. DIAL BY STA SPD NAME
OK
3. DIAL BY SYS SPD NAME
OK
∧
1. Dial By ICM Name
1
DIAL BY ICM NAME
2. DIAL BY STA SPD NAME
OK
Press [OK] or button.
1
CCC (105)
2:DDD (107)
BACK SEND
Use the button or button to select the desired number and press the [SEND] button to call.
CALL TO CCC
06 SEP 04 04:06pm
MSG FLASH
Talk.
NOTE
BACK
Return to the previous
47
Phone Book
2. Dial By STA SPD Name
1. DIAL BY ICM NAME
2
DIAL BY STA SPD NAME
OK
Press [OK] or button.
1:ABC(001)
2:DEF(002)
BACK NAME/TEL SEND
To check the number of the selected name, press the
[NAME/TEL] button.
Use the button or button to select the desired number and press [SEND] button to call.
123456789
LINE 008 00:00:03
TRANS CONF MUTE →
Talk.
3. Dial By SYS SPD Name
3
DIAL BY SYS SPD NAME
OK
∧
Press [OK] or button.
1. TEAM1(2000)
2. TEAM2(2001)
BACK NAME/TEL SEND
To check the number of the selected name, press the
[NAME/TEL] button.
Use the button or button to select the desired number and press [SEND] button to call.
123456789
LINE 008 00:00:03
TRANS CONF MUTE →
Talk.
NOTE
BACK
Return to the previous
48
Entering characters
J
K
H
I
F
G
D
E
L
M
A
B
C
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
W
X
U
V
S
T
Q
R
Y
Z
N
O
P
49
3
4
5
1
2
6
10
11
7
8
9
Glossary of Terms
ICM
Intercom – describes internal calls within the telephone system
CO Line
Central Office Line – also known as a trunk line, exchange line or outside line
Speed Dial
A commonly used number stored in a speed bin for easy access
DND
Do Not Disturb – the station is blocked toall incoming calls
FWD
Forward – calls can be sent to another location such a voicemail or another station
DDI or DID
Direct Dial Inwards or Direct Inwards Dialing – ISDN lines can be provided with multiple telephone numbers which are each routed to individual stations or Hunt Groups
DKTU
Digital Key Telephone Unit – an LG digital telephone
SLT
Single Line Telephone – an analogue telephone
ISDN
Integrated Services Digital Network. Digital CO lines that come in
multiples of 2 channels or more
VMIB
Voice Message Interface Board – LG’s integral Voice Processing card
CONF
Conference – where you can talk to 2 or more internal or external parties
50
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
How do I place a call using the LG-Ericsson LDP-7016D phone?
How do I answer an incoming call?
What are the functions of the three soft buttons below the LCD display?
How do I initiate a conference call?
What is the procedure for redialing the last dialed number?
How do I forward calls to another station or voicemail?
What is the 'Pickup' feature and how do I use it?
Can I leave a message for another station?
advertisement