PB-90 Mounting Brackets
VERTICAL POWER PRODUCTS
Included Mounting System
All vertical power strips include a mounting system that provides fast and secure mounting. PD
Slim Series strips include a quick-clip that when mounted into the rack, the power strip is hung
in place via a series of mounting lances found along its sides. These lances also double as cable
tie points, allowing AC cables to be neatly managed. PDT and PD Slim Series strips include a
mounting clip that when installed in the rack, allows the strip to snap into place. Cable
management clips are included with corded PDT Series models for neat management of
AC cables.
Power Mounting Methods
PB-5A bracket quick-clip (included
with power strip)
mounting
and cable
management
lances built-in
Additional Mounting Brackets
NEW PB-90 bracket orients power outlets on any vertical power strip to the front or back of
the enclosure*. Allows mounting of power strips alongside mounted equipment in wider WRK
Series racks. Use PB-5A brackets to mount Middle Atlantic Products power strips in AXS, Slim
5, RL, RLA and MK Series racks, or to the rackrail of any rack. To mount power strips in the
SR and DWR Series wall racks, use PB-DWR brackets. PB-XS rackmounting power bracket
mounts any C power strip between rackrail of any rack, includes cable management tie points.
Cable management clips available for PDT Series power strips, sold in packs of 6.
Part #
Description
NEW PB-90
brackets mount vertical power to face front or back of any rack* (pair)
PB-5A
brackets to mount vertical power strips on rear rackrail (pair)
PB-DWR
brackets to mount vertical power strips in DWR & SR Series wall racks (pair)
PB-XS
bracket to horizontally rackmount
PDT-CLIPW15-6
cable management clips for 15 Amp PDTs, 6 pieces
PDT-CLIPW20-6
cable management clips for 20 Amp PDTs, 6 pieces
PD Series Power
PB-90 bracket
PDT Series Power
quick-clip (included
with power strip)
Cpower strips
PB-90
mounts power so
outlets face the front
or back of the rack
*requires LBFR-5A-xx to mount inside Slim 5 or AXS Series Racks
Outlets
PD and PD Slim Series
NEMA 5-15R
used in 15
Amp models
PDT Series
NEMA 5-20R
used in 20
Amp models
NEMA 5-20R(IG)
used in 20 Amp
models w/
isolated ground
NEMA 5-15R
used in 15
Amp models
NEMA 5-20R
used in 20
Amp models
PB-DWR
bracket
quick-clip (included
w/ power strip)
Termination
PD and PD Slim Series
PB-DWR
mounting and cable
management lances
built-in
(for wall racks only)
NEMA 5-15P
used in 15 Amp
circuits,
9’ cord
3’ FLEX
with 8” TAILS used
in 15 Amp single
and dual circuits
(PD Series only)
NEMA 5-20P
used in 20 Amp
circuits,
9’ cord
NEMA L5-30
used in 30 Amp
circuits
(PD Series only),
9’ cord
J-Box
used in 15 & 20 Amp
single, multiple and
isolated ground circuits
(PD Series only)
PDT Series
NEMA 5-15P
used in 15 Amp
circuits,
9’ cord
NEMA 5-20P
used in 20 Amp
circuits,
9’ cord
NEMA L5-20P
used in 20 Amp
circuits,
9’ cord
J-Box
used in single, multiple
and isolated
ground circuits
Distributed by Multicom, Inc.
www.multicominc.com
1076 Florida Central Parkway, Longwood, FL 32750
Toll free: 800.423.2594 Phone: 407.331.7779 Fax: 407.339.0204
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement