Oracle SQL*Plus Database Management Systems User Guide

1
Oracle User Guide for CS530
1. Introduction
Oracle is a relational database management system that uses SQL as its data
manipulation language. Information on SQL is given separately to these notes. These
notes are a fast-start to the way we will use Oracle in the labs and supplement the
SQL*Plus User's Guide and Reference manual available on the web.
The Oracle database resides on a server. This is where the binaries are and your
databases. Your database tables DO NOT reside in your own file store and can only be
accessed by using an Oracle tool. When you log onto a machine and start an Oracle tool
the server must be notified to serve the tool to your machine. This can be slow.
However, once the tool is loaded onto the client it runs the program locally so this is
faster. Once you have started a tool don't close it down unless you are finished.
You will be developing your database implementations in pairs. To avoid confusion
and wasted disk space do not create multiple tables with the same things in them. There
should only be one team database, looked after by one person and the other should be
granted permission to use that database (see later on how to do that).
2. Oracle
2.1 Oracle Architecture
Oracle, very simplistically, can be viewed as having a nested architecture (figure 1)
SQL*Forms 4.5
SQL*Plus
Designer
2000
SQL
SQL*Loader
Dictionary
WebDB
Kernel
Pro*
SQL*Net
PL/SQL
Utilities
Cartridges
Figure 1: Basic architecture of Oracle
2.1.1 The Kernel
The internal code that communicates with the database, and handles all the facilities of
DBMS: retrieval, recovery etc. It also optimises request execution to be more efficient,
and deals with the accelerators and physical data storage exploiting the facilities of the
host operating system, which in our case is Unix.
2.1.2 The Data Dictionary
1
2
Describes in detail the Oracle objects. It is used for documentation and management of
the objects. Holds the schema of the tables and views. The description of database
objects is often called metadata (data about data). The dictionary is a set of tables and
views manipulated through SQL. Users can look at the content of the tables through a
series of views. Only the DBA can actually manipulate the dictionary directly (see
figure 2).
2.1.3 SQL layer
The interface between the kernel and the tools of the external layer. Every access
operation to the data is expressed in SQL. SQL commands include:
•
Data Definition commands to define the schema;
•
Data Manipulation commands to manipulated the contents of the schema;
•
Data Control commands to grant users privileges and access rights.
Significant
contents
View
View
Users
can look at these
View
Table
Coded
contents
DBA
can manipulate these
Table
Table
Table
Description of
objects in the
database
Figure 2: The Data Dictionary
2.1.4 The External Layer
A set of tools that enable all the facilities provided by the three basic underlying layers
to be used easily. It is an applications development environment. We will only use
SQL*Plus. This is the interactive interface to SQL, so you can put SQL commands
directly to the database. Has a work environment that can be parameterise; has
commands for the formatting of results and commands to store SQL and SQL*Plus
commands in files.
2
3
2.2 Oracle objects
Oracle manipulates many objects, of which we are interested in five:
• Tables
• Views
• Integrity constraints
• Users and their privileges
• Accelerators on tables (indexes, clusters) -- these are data structures which give a
fast access path to tables, a bit like an index in a book. See Chapters 4 & 5 of
Elmasri and Navathe. We will cover these later in the course.
In Oracle, a user cannot explicitly define an object called a database; a user’s database
is the set of tables and views that a user has access privileges to. A user may access
table and views other than those created by themselves by prefixing them with the name
of that user, provided they have been granted the privilege of doing so.
user
2
user
1
view
1
view
2
table
2
table
1
user
3
view
3
table
3
Index
Cluster
Figure 3: Objects manipulated by Oracle
In Figure 3, user1 has created two tables, table1 and table2, and a view view1. The two
tables are grouped in the same cluster, which means that they are stored internally close
together on the disk because they are often accessed together. This same user can
access table table3 via view view2. User3 has created a table table3, which uses an
index (a data structure which makes accessing data in it faster), and two views view2
and view3 on this table. Finally user2 has created no table or view, but has the privilege
of accessing table table2 by prefixing it with the name of user1.
2.2.1 User Privileges
Users are defined by a name (which is unique), a password and a set of privileges. You
have all been given the privilege to create, modify and delete database objects (called
RESOURCE privilege).The way you will build tables for your databases is as follows:
1. Design your tables
2. One of your team, user A, creates the tables
3
4
3. User A grants permission to the other member of the pair, user B, the privilege to
access the tables using the SQL GRANT statement
4. User B will have to use user A’s tables by prefixing the table name with user A’s
oracle user name. To get round this, users B should create SYNONYMS for user
A’s tables and views.
5. All users can create views, and organise which users have permission to use the
views.
2.2.2 Databases and Tablespaces
The way Oracle has been set up on the SUN server is on a disk local to it. There is only
one Database, run by the Data Base Administrator. The database is divided into six
tablespaces. Tablespaces are partitions where Oracle objects are stored. First year users
are given permission to create objects in tablespace cags_course. Tablespace SYSTEM
is where the Data Dictionary is held (figure 4).
Database
Tablespace staff
Tablespace project
Tablespace system
Tablespace cags_course
Tablespace msc
Figure 4: Tablespaces
4
5
3. Running SQL commands
Oracle requires each user to be registered as a user of Oracle with a user name and a
password. This is separate to the Unix system. However, we have set up your Oracle
username and password to be the same as your Unix ones automatically. All of the
Oracle paths, environment variables and aliases should have been set up automatically
with your account. If you have any problems using a command (for example the
command cannot ‘be found’) then contact the lab supervisor.
Sometimes SQL commands refer to the user name of an Oracle user. Usually your user
name will be the same as the Unix one.
There are two types of commands:
SQL commands:
the commands for controlling, defining, manipulating and querying the database
tables. The SQL Language Reference Manual is the complete manual of the
whole of the Oracle SQL language. The SQL language is used for creating,
manipulating, updating, querying and deleting your tables and the data
dictionary tables. It is very useful and is available on the web. For CS2311 you
can ignore any statement that has the following keywords when referring to the
manual: Rollback, Databases, Tablespaces, Storage and blocks, Clusters and
indexes, Distributed.
SQL*Plus commands:
additional commands governing the SQL*Plus environment, formatting or
results and measuring performance. The complete manual is on the web. I have
included in these notes the basics with a page number of the Guide for further
details. When reading this Guide ignore any reference to PL/SQL and
SQL*Forms.
Oracle is not case-sensitive, which means you can use upper or lower case for
commands, names of tables and so on, but Oracle won’t tell any difference between
STUDENT, Student or student.
6. Backing Up
We do keep a backup. However, for an immediate fix if you muck up a relation is to use
a SQL batch file to create tables, and a SQL batch file for loading the tuples. Then keep
these files in a safe place in the teams collective file store. Then, if all goes wrong you
can rebuild from scratch. Otherwise you will have to ask the DBA to restore your table
which is rather difficult.
To compress these files so they use up less of your filestore quota, look at the Unix
commands ‘compress’ and ‘uncompress’.
7. The Oracle Catalog and Data Dictionary
Oracle has a data dictionary containing all the management information on the objects
in the database. You cannot alter this dictionary directly, but you can look at it: the data
5
6
is held as tables so the usual SQL commands work. Appendix B of the Oracle8 Server
Administrator’s Guide has a list of all the Data Dictionary Views and the Oracle
reserved words. The most interesting Data Dictionary Views for you are:
ALL_CATALOG
ALL_CONSTRAINTS
ALL_CONS_COLUMNS
ALL_SYNONYMS
ALL_TABLES
ALL_VIEWS
DICTIONARY (or DICT)
TABLE_PRIVILEGES
USER_CATALOG (or CAT)
USER_COL_PRIVS
USER_COL_PRIVS_MADE
USER_COL_PRIVS_RECD
USER_CONSTRAINTS
USER_CONS_COLUMNS
USER_SYNONYMS
USER_TABLES
USER_TAB_COLUMNS
USER_TAB_PRIVS
USER_TAB_PRIVS_MADE
USER_TAB_PRIVS_RECD
USER_USERS
USER_VIEWS
Tables, views, synonyms accessible to the user
Constraints on tables accessible to the user
Information about accessible columns in constraint
definitions
Synonyms accessible to the user
Tables accessible to the user. This gives more
information than ALL_CATALOG
Views accessible to the user
Data Dictionary tables and views
Grants on objects for which the user is the grantor,
grantee or owner, or PUBLIC is the grantee
Tables, views, synonyms and sequences owned
Grants on columns for which the user is the owner,
grantor or grantee
Grants on columns of objects owned by the user
Grants on columns for which the user is grantee
Constraints owned by the user
Columns in constraints owned by the user
The user’s private synonyms
Tables owned by the user
Columns of the user’s tables, views and clusters
Grants on objects for which the user is the owner,
grantor or grantee
Grants on objects owned by the user
Grants on objects for which the user is the grantee
Privileges of the current user
Views owned by the user
6
">