POLCO 59554 Digital Tyre Inflator User manual

The POLCO 59554 Digital Tyre Inflator is a handy tool for keeping your tires inflated to the correct pressure. It features a digital display that shows the current tire pressure and allows you to set the desired pressure. It automatically stops inflating when the desired pressure is reached.

PDF Download
Document
POLCO 59554 Digital Tyre Inflator User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Digital display
  • Automatic shut-off
  • Pressure gauge
  • Adjustable pressure settings
  • Compact and portable

Frequently asked questions

Press the 'R' button to cycle through the three pressure formats.

Remove the connector hose and manually remove the excess air from the valve. Recheck the pressure by either reconnecting the inflator or by using a tyre pressure gauge.

Use the + or - buttons to adjust the pre-set value on the gauge display. Press the power switch to 'I' (on) position. The inflator will inflate to the selected pressure and stop automatically.

Deflate the tyre manually to 40PSI or less before beginning inflation. This will allow the inflation to gradually reach the desired pressure and prevent the inflator's pump from stalling.

Switch off the inflator, remove the valve connector, and hold down the 'R' button for approximately 5 seconds. The display should then show 0.0 (PSI, BAR, kPa). You can then reconnect the inflation valve and continue inflation.
Preparing document for printing…
0%