Actiontec SRSK Single-Room Starter Kit USB cable Quick Start Guide
Below you will find brief information for USB cable SRSK Single-Room Starter Kit. This Actiontec USB Cable SRSK Single-Room Starter Kit is a device that allows you to connect multiple computers to a single network. This is done by using a USB cable to connect the computers to the network. The software provided with the device will help you to configure the network and connect your computers. Once your computers are connected, you will be able to share files and resources between them.
advertisement
ActionLink USB Cable SRSK Quick Start
=====================================
ActionLink Home Networking USB Cable Single-Room Starter Kit
Quick Start Guide
Note: Windows 95, Windows 95A, and Windows NT 4.0 do not support USB, and you will be unable to set up the network on computers with these operating systems. To add supplemental USB software to Windows 95B, double-click on "usbsupp.exe" in the folder named "Usbsrsk", and follow the on-screen instructions.
Before installing:
IMPORTANT: Do not plug in the Actiontec USB cable SRSK to the USB ports of your computers before beginning this installation. If you have already plugged in the cable, unplug it and Click "Cancel" to stop the Windows auto installation process.
* Have your Windows 98 or Windows 95 installation CD ready.
* Note that you must install the Actiontec USB Cable SRSK software on each PC that will be on the network.
To install the ActionLink Home Networking USB Cable Single-Room Starter Kit:
1. Extract the downloaded file to a convenient location on the computer hard drive.
2. Navigate to the folder created by the extraction of the driver download. Open the folder "Usbsrsk" and double-click "Usbsrsk.exe" to begin the installation.
3. Follow the on screen instructions. When prompted, enter a unique "Computer Name" that will identify the computer on the network. (The installation program may ask you to inset the Windows 95 or Windows 98 CD for the network installation. In that case, follow the on screen instructions.)
4. When installation is complete, restart your computer.
* Repeat steps 1 - 4 for the other computers that will be connected.
Note: You will be asked for the "Network User Name" and "Password" that you chose during installation when Windows is restarted. Do NOT bypass this step.
5. When Windows has finished restarting, the Actiontec USB SRSK manager window will appear with its Connections tab in front.
6. Plug the Actiontec USB Cable into the USB ports of each computer. The Actiontec
USB SRSK Manager Connections tab will change to show the computers on the network.
advertisement
Key Features
- Single-room network
- USB cable for connection
- Network software included
- File sharing and resource access
- Easy setup and configuration
Frequently Answers and Questions
What operating systems are supported by the Actiontec USB Cable SRSK?
What do I do if the Windows auto-installation process starts before I'm ready to install the software?
What happens when Windows restarts after the software installation?
Related manuals
advertisement