ASRock Z77 WS Motherboard Quick Installation Guide

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identifi cation or explanation and to the owners’ benefi t, without intent to infringe.

Disclaimer:

Specifi cations and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fi tness for a particular purpose. In no event shall ASRock, its directors, offi cers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profi ts, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

Published August 2012

Copyright©2012 ASRock INC. All rights reserved.

ASRock Z77 WS Motherboard

1

2

Motherboard Layout

1 2 3 4 5 6 7

24.4cm (9.6 in)

USB 3.0

T: USB1

B: USB2

ATX12V1

PWR_FAN1

CPU_FAN1

CPU_FAN2

USB 3.0

T: USB3

B: USB4

USB 3.0

T: USB5

B: USB6

Top:

RJ-45

USB 2.0

T: USB0

B: USB1

USB 3.0

T: USB7

B: USB8

Top:

RJ-45

LAN

PHY

8

44

40

39

43

42

41

38

37

36

CHA_FAN3

SLI/XFIRE_PWR1

PCIE1

X

Fast USB

X

Fast LAN

PCIE2

LAN

PHY

Super

I/O

X

Fast RAM

PCIE3

2 oz Copper PCB

PCIE4

Z77 WS

PCIE5

AUDIO

CODEC

1

HDMI_SPDIF1

1

1

HD_AUDIO1

IR1

COM1

1

PCIE6

RoHS

1

PCIE7

FRONT_1394 CHA_FAN1

CHA_FAN2

1

1

CMOS

Battery

USB6_7

CIR1

1

USB4_5

1

USB2_3

DDR3 3000+

USB3_11_12 USB3_9_10

Intel

Z77

Dr.

Debug 64Mb

BIOS

1

CLRCMOS1

1

PLED1

SPEAKER1

1

PLED PWRBTN

1

HDLED RESET

PANEL1

RSTBTN

PWRBTN

9

10

16

17

18

19

20

14

15

11

12

13

35 34 33 32 31 30 29 28 27 26 25

11

12

13

14

8

9

10

5

6

7

1

2

3

4

19

20

21

22

23

15

16

17

18

ATX 12V Power Connector (ATX12V1)

1155-Pin CPU Socket

Power Fan Connector (PWR_FAN1)

CPU Fan Connector (CPU_FAN1)

CPU Fan Connector (CPU_FAN2)

2 x 240-pin DDR3 DIMM Slots

(DDR3_A1, DDR3_B1, Black)

2 x 240-pin DDR3 DIMM Slots

(DDR3_A2, DDR3_B2, Black)

ATX Power Connector (ATXPWR1)

USB 3.0 Header (USB3_11_12, Black)

USB 3.0 Header (USB3_9_10, Black)

Intel Z77 Chipset

SATA3 Connectors (SATA3_A1_A2, Gray)

SATA3 Connectors (SATA3_A3_A4, Gray)

SATA3 Connectors (SATA3_0_1, Gray)

SATA2 Connectors (SATA2_2_3, Black)

SATA2 Connectors (SATA2_4_5, Black)

Reset Switch (RSTBTN)

Power Switch (PWRBTN)

Power LED Header (PLED1)

System Panel Header (PANEL1, Black)

Chassis Speaker Header (SPEAKER1, Black)

Clear CMOS Jumper (CLRCMOS1)

SPI Flash Memory (64Mb)

35

40

41

42

43

44

36

37

38

39

28

29

30

24

25

26

27

31

32

33

34

24 23 22 21

Dr. Debug

USB 2.0 Header (USB2_3, Black)



Consumer Infrared Module Header

(CIR1, Gray)

Chassis Fan Connector (CHA_FAN2)


Front Panel IEEE 1394 Header

(FRONT_1394, Black)

Infrared Module Header (IR1)

COM Port Header (COM1)

HDMI_SPDIF Header

Front Panel Audio Header

PCI Express 3.0 x16 Slot (PCIE7, Black)







SLI / XFIRE Power Connector



I/O Panel

1 2 3 4 5

6

7

8

18 17 16 15 14 13 12

1 PS/2 Keyboard/Mouse Port (Purple/Green) ** 10 Front Speaker (Lime)

2 USB 3.0 Ports (USB3_34) 11 Microphone (Pink)

* 3 LAN RJ-45 Port 12 USB 3.0 Ports (USB3_78)

4 USB 2.0 Ports (USB01) 13 IEEE 1394 Port

* 5 LAN RJ-45 Port *** 14 eSATA3 Port (ESATA_1)

6 Central / Bass (Orange) 15 USB 3.0 Ports (USB3_56)

7

8

9

Rear Speaker (Black)

Optical SPDIF Out Port

Line In (Light Blue)

16 HDMI Port (HDMI1)

17 Clear CMOS Switch (CLRCBTN)

18 USB 3.0 Ports (USB3_12)

9

10

11

* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED

indications.

LAN Port LED Indications

Activity/Link LED SPEED LED

Status Description Status Description

ACT/LINK

LED

SPEED

LED

Off No Link Off 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

LAN Port

** If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”.

See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker

(No. 10) (No. 7)

Central / Bass Line In or

(No. 6) Side Speaker

2 V

6 V

8 V

3


To enable Multi-Streaming function, you need to connect a front panel audio cable to the front

panel audio header. After restarting your computer, you will fi nd “Mixer” tool on your system.

Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA

Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek

HDA Audio 2nd output” to use front panel audio.

*** eSATA3 connector supports SATA Gen3 in cable 1M.

4


1. Introduction

Thank you for purchasing ASRock Z77 WS motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD.

Because the motherboard specifi cations and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifi cations of this manual occur, the updated version will be available on ASRock website without further notice. You may fi nd the latest VGA cards and CPU support lists on ASRock website as well.

ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit our website for specifi c information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents

ASRock Z77 WS Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

ASRock Z77 WS Quick Installation Guide

ASRock Z77 WS Support CD

6 x Serial ATA (SATA) Data Cables (Optional)

1 x Serial ATA (SATA) HDD Power Cable (Optional)

1 x I/O Panel Shield

2 x ASRock SLI_Bridge Cards

1 x ASRock SLI_Bridge_3S Card

1 x ASRock 3-Way SLI Bridge Card

ASRock Reminds You...

To get better performance in Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64bit, it is recommended to set the BIOS option in Storage Confi guration to

AHCI mode. For the BIOS setup, please refer to the “User Manual” in our support CD for details.

5


6

1.2 Specifi cations

CPU

Chipset

Memory

Expansion Slot

- Premium Gold Capacitor design (100% Japan-made

high-quality Conductive Polymer Capacitors)

- Supports 3 rd and 2 nd Generation Intel ® Core TM i7 / i5 / i3 in

LGA1155 Package

- Digi Power Design

- 8 + 4 Power Phase Design

- Supports Intel ® Turbo Boost 2.0 Technology

- Supports Intel ® K-Series unlocked CPU

- Intel ® Z77

- Supports Intel ® Rapid Start Technology and Smart Connect

Technology

- Dual Channel DDR3 Memory Technology

- 4 x DDR3 DIMM slots

- Supports DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)/

1600/1333/1066 non-ECC, un-buffered memory

- Max. capacity of system memory: 32GB (see CAUTION 1)

- Supports Intel ® Extreme Memory Profi le (XMP)1.3/1.2

- 5 x PCI Express 3.0 x16 slots (PCIE2: x16 mode OR PCIE1/

PCIE3/PCIE5/PCIE7: x16/0/16/0 or x8/8/8/8 mode)

* PCIE 3.0 is only supported with Intel ® Ivy Bridge CPU. With

Intel ® Sandy Bridge CPU, it only supports PCIE 2.0.

- 1 x PCI Express 2.0 x16 slot (PCIE4: x4 mode)

- 1 x PCI Express 2.0 x 1 slot

- Supports AMD Quad CrossFireX TM , 4-Way CrossFireX TM ,

3-Way CrossFireX TM and CrossFireX TM

- Supports NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM

and SLI TM

be supported only with processors which are GPU

integrated.

- Supports Intel ® HD Graphics Built-in Visuals: Intel ® Quick

Sync Video 2.0, Intel ® InTru TM 3D, Intel ® Clear Video HD

Technology, Intel ® Insider TM , Intel ® HD Graphics 2500/4000

- Pixel Shader 5.0, DirectX 11 with Intel ® Ivy Bridge CPU.

Pixel Shader 4.1, DirectX 10.1 with Intel ® Sandy Bridge

CPU.

- Max. shared memory 1760MB


Audio

LAN

Storage

Rear Panel I/O

- Supports HDMI 1.4a Technology with max. resolution up to

1920x1200 @ 60Hz

- Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI (Compliant HDMI

monitor is required) (see CAUTION 2)

- Supports HDCP function with HDMI port

- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

with HDMI port

- 7.1 CH HD Audio with Content Protection

(Realtek ALC898 Audio Codec)

- Premium Blu-ray audio support

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s

- Broadcom BCM57781

- Supports Wake-On-LAN

- Supports Energy Effi cient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- 2 x SATA3 6.0 Gb/s connectors by Intel ® Z77 , support RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and

Intel Smart Response Technology), NCQ, AHCI and Hot

Plug functions

- 4 x SATA3 6.0 Gb/s connectors by ASMedia ASM1061,

support NCQ, AHCI and “Hot Plug” functions (SATA3_A4

connector is shared with eSATA3 port)

- 4 x SATA2 3.0 Gb/s connectors by Intel ® Z77 , support RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage and

Intel Smart Response Technology), NCQ, AHCI and Hot

Plug functions

I/O Panel

- 1 x PS/2 Keyboard/Mouse Port

- 1 x HDMI Port

- 1 x Optical SPDIF Out Port

- 2 x Ready-to-Use USB 2.0 Ports

- 1 x eSATA3 Connector

- 8 x Ready-to-Use USB 3.0 Ports

- 2 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED

LED)

- 1 x IEEE 1394 Port

- 1 x Clear CMOS Switch with LED

- HD Audio Jack: Rear Speaker/Central/Bass/Line in/Front

Speaker/Microphone

7


8

BIOS Feature

USB3.0

Connector

Support CD

Hardware

Monitor

- 4 x Rear USB 3.0 ports by Intel ® Z77, support USB 1.0/2.0/3.0

up to 5Gb/s

- 4 x Rear USB 3.0 ports by Etron EJ188, support

USB 1.0/2.0/3.0 up to 5Gb/s

- 2 x Front USB 3.0 headers by Etron EJ188 (support 4

USB 3.0 ports), support USB 1.0/2.0/3.0 up to 5Gb/s

- 1 x IR header

- 1 x CIR header

- 1 x COM port header

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header

- 1 x Power LED header

- 2 x CPU Fan connectors (1 x 4-pin, 1 x 3-pin)

- 3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)

- 1 x Power Fan connector (3-pin)

- 24 pin ATX power connector

- 8 pin 12V power connector

- SLI/XFire power connector

- Front panel audio connector

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

- 2 x USB 3.0 headers (support 4 USB 3.0 ports)

- 1 x Dr. Debug with LED

- 1 x Power Switch with LED

- 1 x Reset Switch with LED

- 1 x Clear CMOS Switch with LED

- 64Mb AMI UEFI Legal BIOS with GUI support

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage

Multi-adjustment

- Drivers, Utilities, AntiVirus Software (Trial Version),

CyberLink MediaEspresso 6.5 Trial, ASRock MAGIX

Multimedia Suite - OEM

- CPU Temperature Sensing

- Chassis Temperature Sensing

- CPU/Chassis/Power Fan Tachometer

- CPU/Chassis Quiet Fan (Allows Chassis Fan Speed Auto-

Adjust by CPU Temperature)

- CPU/Chassis Fan Multi-Speed Control


Certifi cations

- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit /

XP / XP 64-bit compliant (see CAUTION 3)

- FCC, CE, WHQL

- ErP/EuP Ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking

Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by

overclocking.

CAUTION!

1. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows ® 7 / Vista TM / XP. For Windows ® OS with 64-bit

CPU, there is no such limitation. You can use ASRock XFast

RAM to utilize the memory that Win dows ® cannot use.

2. xvYCC and Deep Color are only supported under Windows ® 7

64-bit / 7. Deep Color mode will be enabled only if the display supports 12bpc in EDID. HBR is supported under Windows ® 7

64-bit / 7 / Vista TM 64-bit / Vista TM .

3. ASRock XFast RAM is not supported by Microsoft ® Windows ®

XP / XP 64-bit. Intel ® Smart Connect Technology and Intel ® USB

3.0 ports are not supported by Microsoft ® Windows ® Vista TM /

Vista TM 64-bit / XP / XP 64-bit.


9

10

1.3 Unique Features

ASRock Extreme Tuning Utility (AXTU)

ASRock Extreme Tuning Utility (AXTU) is an all-in-one tool to ne-tune different system functions in a user-friendly interface, which includes Hardware Monitor, Fan Control, Overclocking,

OC DNA, IES and XFast RAM. In Hardware Monitor, it shows the major readings of your system. In Fan Control, it shows the fan speed and temperature for you to adjust. In Overclocking, you are allowed to overclock CPU frequency for optimal system performance. In OC DNA, you can save your OC settings as a profi le and share it with your friends. Your friends then can load the OC profi le to their own system to get the same OC settings. In IES (Intelligent Energy Saver), the voltage regulator can reduce the number of output phases to improve effi ciency when the CPU cores are idle without sacrifi cing computing performance. In XFast RAM, it fully utilizes the memory space that cannot be used under Windows ® OS 32-bit CPU.

ASRock Instant Boot

ASRock Instant Boot allows you to turn on your PC in just a few seconds, provides a much more effi cient way to save energy, time, money, and improves system running speed for your system. It leverages the S3 and S4 ACPI features which normally enable the Sleep/Standby and Hibernation modes in Windows ® to shorten boot up time. By calling S3 and S4 at specifi c timing during the shutdown and startup process, Instant Boot allows you to enter your Windows ® desktop in a few seconds.

ASRock Instant Flash

ASRock Instant Flash is a BIOS fl ash utility embedded in Flash

ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems fi rst like MS-

DOS or Windows ® . With this utility, you can press the <F6> key during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS fi le to your USB fl ash drive, fl oppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional fl oppy diskette or other complicated fl ash utility. Please be noted that the USB fl ash drive or hard drive must use FAT32/16/12 fi le system.


ASRock APP Charger

If you desire a faster, less restricted way of charging your

Apple devices, such as iPhone/iPad/iPod Touch, ASRock has prepared a wonderful solution for you - ASRock APP Charger.

Simply install the APP Charger driver, it makes your iPhone charge much quickly from your computer and up to 40% faster than before. ASRock APP Charger allows you to quickly charge many Apple devices simultaneously and even supports continuous charging when your PC enters into Standby mode (S1),

Suspend to RAM (S3), hibernation mode (S4) or power off (S5).

With APP Charger driver installed, you can easily enjoy the marvelous charging experience.

ASRock SmartView

ASRock SmartView, a new function for internet browsers, is the smart start page for IE that combines your most visited web sites, your history, your Facebook friends and your real-time newsfeed into an enhanced view for a more personal Internet experience. ASRock motherboards are exclusively equipped with the ASRock SmartView utility that helps you keep in touch with friends on-the-go. To use ASRock SmartView feature, please make sure your OS version is Windows ® 7 / 7 64 bit /

Vista TM / Vista TM 64 bit, and your browser version is IE8.

ASRock XFast USB

ASRock XFast USB can boost USB storage device performance. The performance may depend on the properties of the device.

ASRock XFast LAN

ASRock XFast LAN provides a faster internet access, which includes the benefits listed below. LAN Application Prioritization: You can confi gure your application’s priority ideally and/or add new programs. Lower Latency in Game: After setting online game’s priority higher, it can lower the latency in games. Traffi c

Shaping: You can watch Youtube HD videos and download simultaneously. Real-Time Analysis of Your Data: With the status window, you can easily recognize which data streams you are transferring currently.


11

ASRock XFast RAM

ASRock XFast RAM is a new function that is included into AS-

Rock Extreme Tuning Utility (AXTU). It fully utilizes the memory space that cannot be used under Windows ® OS 32-bit CPU.

ASRock XFast RAM shortens the loading time of previously visited websites, making web surfing faster than ever. And it also boosts the speed of Adobe Photoshop 5 times faster. Another advantage of ASRock XFast RAM is that it reduces the frequency of accessing your SSDs or HDDs in order to extend their lifespan.

ASRock Crashless BIOS

ASRock Crashless BIOS allows users to update their BIOS without fear of failing. If power loss occurs during the BIOS update process, ASRock Crashless BIOS will automatically fi nish the BIOS update procedure after regaining power. Please note that BIOS fi les need to be placed in the root directory of your

USB disk. Only USB2.0 ports support this feature.

ASRock Interactive UEFI

ASRock Interactive UEFI is a blend of system configuration tools, cool sound effects and stunning visuals. The unprecedented UEFI provides a more attractive interface and brings a lot more amusing.

ASRock Good Night LED

ASRock Good Night LED technology can offer you a better environment by extinguishing the unessential LED. By enabling

Good Night LED in BIOS, the Power / HDD / LAN LED will be switched off when system is on. Not only this, Good night LED will automatically switch off Power and Keyboard LED when the system enters into Standby / Hibernation mode as well.

12


2. Installation

This is an ATX form factor (12.0” x 9.6”, 30.5 x 24.4 cm) motherboard. Before you install the motherboard, study the confi guration of your chassis to ensure that the motherboard fi ts into it.

Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the motherboard’s components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply. Failure to do

so may cause severe damage to the motherboard, peripherals, and/or

components.

13


2.3 CPU Installation

In order to provide the LGA 1155 CPU sockets more protection and make the installation process easier, ASRock has added a new protection cover on top of the load plate to replace the former PnP caps that were under the load plate. For the installation of Intel ® 1155-Pin CPUs with the new protection cover, please follow the steps below.

Load

Plate

Cover

Contact

Array

Load

Lever

Socket

Body

1155-Pin Socket Overview

Before you insert the 1155-Pin CPU into the socket, please check if the

CPU surface is unclean or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.

Otherwise, the CPU will be seriously damaged.

Step 1. Open the socket:

Step 1-1. Disengage the lever by pressing it down and sliding it out of the hook.

You do not have to remove the protection cover.

Step 1-2. Keep the lever positioned at about

135 degrees in order to flip up the load plate.

14

Step 2. Insert the 1155-Pin CPU:

Step 2-1. Hold the CPU by the edge which is marked with a black line.

Step 2-2. Orient the CPU with the IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches.


Pin1 orientation key notch alignment key orientation key notch

1155-Pin CPU alignment key

1155-Pin Socket

For proper installation, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket.

Step 2-3. Carefully place the CPU into the socket.

Pin1

Step 2-4. Verify that the CPU is within the socket and properly mated to the orient keys.

Step 3. Close the socket:

Step 3-1. Flip the load plate onto the IHS.

Step 3-2. Press down the load lever, and secure it with the load plate tab under the retention tab. The protection cover will automatically come off by itself.

Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.


15

16

2.4 Installation of CPU Fan and Heatsink

This motherboard is equipped with 1155-Pin socket that supports Intel 1155-Pin

CPUs. Please adopt the type of heatsink and cooling fan compliant with Intel 1155-

Pin CPU to dissipate heat. Before you install the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU_FAN connector (CPU_

FAN1, see page 2, No. 4 or CPU_FAN2, see page 2. No.5).

For proper installation, please kindly refer to the instruction manuals of your

CPU fan and heatsink.

Below is an example to illustrate the installation of the heatsink for 1155-Pin CPUs.

Step 1. Apply thermal interface material onto the center of the IHS on the socket’s surface.

Apply Thermal

Interface Material

Step 2. Place the heatsink onto the socket. Ensure that the fan cables are oriented on side closest to the CPU fan connector on the motherboard

(CPU_FAN1, see page 2, No. 4 or CPU_

FAN2, see page 2. No.5).

Step 3. Align fasteners with the motherboard throughholes.

Step 4. Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.

Fan cables on side closest to MB header

Press Down

(4 Places)

Fastener slots pointing straight out

If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard.

Step 5. Connect fan header with the CPU fan connector on the motherboard.

Step 6. Secure redundant cable with tie-wrap to ensure the cable does not interfere with fan operation or contact other components.


2.5 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel confi guration, you always need to install identical (the same brand, speed, size and chip-type) DDR3 DIMM pair in the slots: You have to install identical

DDR3 DIMMs in Dual Channel A (DDR3_A1 and DDR3_B1; Black slots; see p.2

No. 6) or identical DDR3 DIMMs in Dual Channel B (DDR3_A2 and DDR3_

B2; Black slots; see p.2 No. 7), so that Dual Channel Memory Technology can be activated. This motherboard also allows you to install four DDR3 DIMMs for dual channel confi guration, please install identical DDR3 DIMMs in all four slots. You may refer to the Dual Channel Memory Confi guration Table below.

Dual Channel Memory Confi guration

(1)

(2)

DDR3_A1 DDR3_A2

(Black Slot) (Black Slot) (Black Slot) (Black Slot)

Populated -

-

DDR3_B1 DDR3_B2

Populated -

Populated - Populated

(3)* Populated Populated Populated Populated

* For confi guration (3), please install identical DDR3 DIMMs in all four

slots.

1. If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots: DDR3_

A1 and DDR3_B1, or DDR3_A2 and DDR3_B2.

2. If only one memory module or three memory modules are installed in the DDR3 DIMM slots on this motherboard, it is unable to activate

Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in

DDR3_A1 and DDR3_A2, it is unable to activate Dual Channel

Memory Technology.

4. It is not allowed to install a DDR or DDR2 memory module into

DDR3 slot; otherwise, this motherboard and DIMM may be damaged.

5. Some DDR3 1GB double-sided DIMMs with 16 chips may not work on this motherboard. It is not recommended to install them on this motherboard.

6. For optimal compatibility and stability while overclocking memory frequency, it is recommended to install one memory module on

DDR3_B2 slot or two memory modules on DDR3_A2 and DDR3_

B2 slots.


17

Installing a DIMM

Please make sure to disconnect power supply before adding or removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.

The DIMM only fi ts in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.

18


2.6 Expansion Slots (PCI Express Slots)

There are 7 PCI Express slots on this motherboard.

PCIE slots:

PCIE1 / PCIE5 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards, or to install PCI Express graphics cards to support

CrossFireX TM or SLI TM function.

PCIE3 / PCIE7 (PCIE 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards, or to install PCI Express graphics cards to support

CrossFireX TM or SLI TM function.

PCIE2 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE4 (PCIE 2.0 x16 slot) is used for PCI Express x4 lane width graphics cards or ASRock Game Blaster.

PCIE6 (PCIE 2.0 x1 slot) is used for a PCI Express x1 lane width card, such as a Gigabit LAN card, SATA2 card, etc.

PCIE Slot Confi gurations

PCIE1 PCIE2 PCIE3 PCIE5 PCIE7

Single Graphics Card N/A x16 N/A N/A N/A

Two Graphics Cards in x16 N/A N/A x16 N/A

CrossFireX TM or SLI TM Mode

Three Graphics Cards in x8 N/A x8 x16 N/A

3-Way CrossFireX TM or

3-Way SLI TM Mode

Four Graphics Cards in x8 N/A x8 x8 x8

4-Way CrossFireX TM or

4-Way SLI TM Mode


19

20

1. In single VGA card mode, it is recommended to install a PCI Express

x16 graphics card in the PCIE2 slot.

2. PCIE1, PCIE3, PCIE5 and PCIE7 slots will be disabled if PCIE2 slot

is occupied.

3. In CrossFireX TM mode or SLI TM mode, please install the PCI Express

x16 graphics cards in PCIE1 and PCIE5 slots. Both these two slots

will work at x16 bandwidth.

4. In 3-Way CrossFireX TM or 3-Way SLI TM mode, please install the PCI

Express x16 graphics cards in PCIE1, PCIE3 and PCIE5 slots. PCIE1

and PCIE3 will work at x8 bandwidth, while PCIE5 works at x16

bandwidth.

5. In 4-Way CrossFireX TM or 4-Way SLI TM mode, please install the PCI

Express x16 graphics cards in PCIE1, PCIE3, PCIE5 and PCIE7

slots. All these four slots will work at x8 bandwidth.

6. Please connect a chassis fan to the motherboard’s chassis fan

connector (CHA_FAN1, CHA_FAN2 or CHA_FAN3) when using

multiple graphics cards for better thermal environment.

Only support

Gen 3 speed. To run the PCI Express in Gen 3 speed, please install

an Ivy Bridge CPU. If you install a Sandy Bridge CPU, the PCI

Express will run only at PCI Express Gen 2 speed.

Installing an expansion card

Step 1. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 4. Align the card connector with the slot and press fi rmly until the card is completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.


2.7 SLI

TM

, 3-Way SLI

TM

, 4-Way SLI

TM

and Quad SLI

TM

Operation

Guide

This motherboard supports NVIDIA ® SLI TM , 3-Way SLI TM , 4-Way SLI TM and Quad

SLI TM (Scalable Link Interface) technology that allows you to install up to four identical PCI Express x16 graphics cards. Currently, NVIDIA ® SLI TM technology supports Windows ® XP / XP 64-bit / Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS. NVIDIA ®

3-Way SLI TM , 4-Way SLI TM and Quad SLI TM technology supports Windows ® Vista TM /

Vista TM 64-bit / 7 / 7 64-bit OS only. Please follow the installation procedures in this section.

Requirements

1. For SLI TM technology, you should have two identical SLI TM -ready graphics

cards that are NVIDIA ® certifi ed. For 3-Way SLI TM technology you should

have three, whereas for 4-Way SLI TM technology you should have four. For

Quad SLI

TM

technology, you should have two identical Quad SLI

TM

-ready

graphics cards that are NVIDIA ® certifi ed.

2. Make sure that your graphics card driver supports NVIDIA ® SLI TM technology.

Download the driver from NVIDIA website (www.nvidia.com).

3. Make sure that your power supply unit (PSU) can provide at least the

minimum power required by your system. It is recommended to use NVIDIA ®

certifi ed PSU. Please refer to NVIDIA ® website for details.

2.7.1 Graphics Card Setup

2.7.1.1 Installing Two SLI

TM

-Ready Graphics Cards

Step 1. Install identical SLI TM -ready graphics cards that are NVIDIA ® certifi ed because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Insert one graphics card into

PCIE1 slot and the other graphics card to PCIE5 slot. Make sure that the cards are properly seated on the slots.


21

Step2. If required, connect the auxiliary power source to the PCI Express graphics cards.

Step3. Align and insert the ASRock SLI_Bridge_3S Card to the goldfi ngers on each graphics card. Make sure the ASRock SLI_Bridge_3S Card is fi rmly in place.

ASRock SLI_Bridge_3S Card

Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot.

2.7.1.2 Installing Three SLI

TM


Step 1. Install identical 3-Way SLI TM -ready graphics cards that are NVIDIA ® certifi ed because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Each graphics card should have two goldfi ngers for the 3-Way SLI Bridge connector. Insert one graphics card into PCIE1 slot, another graphics card to PCIE3 slot, and the other graphics card to PCIE5 slot. Make sure that the cards are properly seated on the slots.

22

Two Goldfi ngers


Step2. Connect the auxiliary power source to the PCI Express graphics card.

Please make sure that both power connectors on the PCI Express graphics card are connected. Repeat this step on the three graphics cards.

Step3. Align and insert the ASRock 3-Way SLI Bridge Card to the goldfingers on each graphics card. Make sure the ASRock 3-Way SLI Bridge Card is fi rmly in place.

ASRock 3-Way SLI Bridge Card



23

2.7.1.3 Installing Four SLI

TM


Step 1. Install identical 4-Way SLI TM -ready graphics cards that are NVIDIA ® certifi ed because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Each graphics card should have two goldfi ngers for the ASRock SLI Bridge Card connectors.

Insert one graphics card into the PCIE1 slot, another graphics card into the

PCIE3 slot, the third graphics card into the PCIE5 slot and the last graphics card into the PCIE7 slot. Make sure that the cards are properly seated on the slots.

Two Goldfi ngers

Step2. Connect the auxiliary power source to the PCI Express graphics card.

Please make sure that both power connectors on the PCI Express graphics card are connected. Repeat this step on the other graphics cards.

Step3. Align and insert an ASRock SLI Bridge Card to the goldfi ngers of the fi rst and second graphics card. Install the second ASRock SLI Bridge Card to the goldfi ngers of the third and fourth graphics card. Connect the second and the fourth graphics card with the ASRock SLI_Bridge_3S Card. Make sure the ASRock SLI Bridge Cards are fi rmly in place.

24

2 ASRock SLI_Bridge Cards

and an ASRock SLI_Bridge_3S Card



2.7.2 Driver Installation and Setup

Install the graphics card drivers to your system. After that, you can enable the Multi-

Graphics Processing Unit (GPU) feature in the NVIDIA ® nView system tray utility.

Please follow the below procedures to enable the multi-GPU feature.

For Windows ® XP / XP 64-bit OS:

NVIDIA Settings icon on your Windows ® taskbar.

B. From the pop-up menu, select Set SLI and PhysX confi guration. In

Set PhysX GPU acceleration item, please select Enabled. In Select

an SLI confi guration item, please select Enable SLI. And click Apply.

C. Reboot your system.

D. You can freely enjoy the benefi t of SLI TM feature.


25

Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS:

and Quad SLI TM mode)

A. Click the Start icon on your Windows taskbar.

B. From the pop-up menu, select All Programs, and then click NVIDIA

Corporation.

E. From the pop-up menu, select Set SLI and PhysX confi guration. In

Set PhysX GPU acceleration item, please select Enabled. In Select

an SLI confi guration item, please select Enable SLI. And click Apply.

26

F. Reboot your system.

G. You can freely enjoy the benefi t of SLI TM or Quad SLI TM feature.


Windows ® Vista TM / Vista TM 64-bit / 7 / 7 64-bit OS:

(For 3-Way SLI TM or 4-Way SLI TM mode)

A. Follow step A to D on page 26.

B. From the pop-up menu, select Set SLI and PhysX confi guration. In

Select a hardware acceleration setting for PhysX item, please

select Enabled. In Select an SLI confi guration item, please select

Enable 3-way SLI or Enable 4-way SLI. And click Apply.


D. You can freely enjoy the benefi ts of 3-Way SLI TM or 4-Way SLI TM .

* SLI

TM

appearing here is a registered trademark of NVIDIA

®

Technologies Inc., and is used

only for identifi cation or explanation and to the owners’ benefi t, without intent to infringe.


27

2.8 CrossFireX

TM

, 3-Way CrossFireX

TM

, 4-Way CrossFireX

TM

and Quad CrossFireX

TM

Operation Guide

This motherboard supports CrossFireX TM , 3-way CrossFireX TM , 4-way CrossFireX TM and Quad CrossFireX TM . CrossFireX TM technology offers the most advantageous means available of combining multiple high performance Graphics Processing

Units (GPU) in a single PC. Combining a range of different operating modes with intelligent software design and an innovative interconnect mechanism, CrossFireX TM enables the highest possible level of performance and image quality in any 3D application. Currently CrossFireX TM is supported with Windows ® XP / Vista TM / 7 OS.

3-way CrossFireX TM , 4-way CrossFireX TM and Quad CrossFireX TM are supported with Windows ® Vista TM / 7 OS only. Please check AMD’s website for CrossFireX TM driver updates.

1. If a customer incorrectly confi gures their system they will not see the performance

benefi ts of CrossFireX TM . All three CrossFireX TM components, a CrossFireX TM

Ready graphics card, a CrossFireX

TM

Ready motherboard and a CrossFireX

TM

Edition co-processor graphics card, must be installed correctly to benefi t from the

CrossFireX TM multi-GPU platform.

2. If you pair a 12-pipe CrossFireX TM Edition card with a 16-pipe card, both cards

will operate as 12-pipe cards while in CrossFireX

TM

mode.

2.8.1 Graphics Card Setup

2.8.1.1 Installing Two CrossFireX

TM


Different CrossFireX TM cards may require different methods to enable CrossFireX TM feature. For other CrossFireX TM cards that AMD has released or will release in the future, please refer to AMD graphics card manuals for detailed installation guide.

Step 1. Insert one Radeon graphics card into PCIE1 slot and the other Radeon graphics card to PCIE5 slot. Make sure that the cards are properly seated on the slots.

28


Step 2. Connect two Radeon graphics cards by installing a CrossFire Bridge on the CrossFire Bridge Interconnects on the top of the Radeon graphics cards. (The CrossFire Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.)

CrossFire Bridge or

Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graphics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter.)


29

2.8.1.2 Installing Three CrossFireX

TM


Step 1. Install identical 3-Way CrossFireX TM -ready graphics cards that are AMD ® certifi ed because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Insert one graphics card into PCIE1 slot, another graphics card to PCIE3 slot, and the other graphics card to PCIE5 slot. Make sure that the cards are properly seated on the slots.

Step 2. Use one CrossFire TM Bridge to connect the Radeon graphics cards on

PCIE1 and PCIE3 slots, and use the other CrossFire TM Bridge to connect the Radeon graphics cards on PCIE3 and PCIE5 slots. (The CrossFire TM

Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.)

CrossFire TM Bridge


30


2.8.1.3 Installing Four CrossFireX

TM


Step 1. Install identical 4-Way CrossFireX TM -ready graphics cards that are AMD ® certifi ed because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Insert one graphics card into PCIE1 slot, another graphics card into PCIE3 slot, the third graphics card into PCIE5 slot and the last graphics card into PCIE7 slot. Make sure that the cards are properly seated on the slots.

Step 2. Use one CrossFire TM Bridge to connect the Radeon graphics cards on

PCIE1 and PCIE3 slots, another CrossFire TM Bridge to connect the Radeon graphics cards on PCIE3 and PCIE5 slots, and use the third Cross-

Fire TM Bridge to connect the Radeon graphics cards on PCIE5 and PCIE7 slots. (The CrossFire TM Bridge is provided with the graphics card you purchase, not bundled with this motherboard. Please refer to your graphics card vendor for details.)

CrossFire TM Bridge



31

2.8.2 Driver Installation and Setup

Step 1. Power on your computer and boot into OS.

Step 2. Remove the AMD driver if you have any VGA driver installed in your

system.

The Catalyst Uninstaller is an optional download. We recommend using this

utility to uninstall any previously installed Catalyst drivers prior to installation.

Please check AMD website for ATI TM driver updates.

Step 3. Install the required drivers to your system.

For Windows ® XP OS:

A. AMD recommends Windows ® XP Service Pack 2 or higher to be

installed (If you have Windows ® XP Service Pack 2 or higher installed

in your system, there is no need to download it again):

http://www.microsoft.com/windowsxp/sp2/default.mspx

B. You must have Microsoft .NET Framework installed prior to

downloading and installing the CATALYST Control Center. Please

check Microsoft website for details.

Windows ® 7 / Vista TM OS:

Install the CATALYST Control Center. Please check AMD website for details.

Step 4. Restart your computer.

Step 5. Install the VGA card drivers to your system, and restart your computer.

Then you will fi nd “ATI Catalyst Control Center” on your Windows ® taskbar.

ATI Catalyst Control Center

32


Step 6. Double-click “ATI Catalyst Control Center”. Click “View”, select “CrossFireX TM ”, and then check the item “Enable CrossFireX TM ”. Select “2 GPUs” and click “Apply” (if you install two Radeon graphics cards). Select “3

GPUs” and click “OK” (if you install three Radeon graphics cards). Select “4

GPUs” and click “OK” (if you install four Radeon graphics cards).

Although you have selected the option “Enable CrossFire TM ”, the CrossFireX TM function may not work actually. Your computer will automatically reboot. After restarting your computer, please confi rm whether the option “Enable

CrossFire

TM

” in “ATI Catalyst Control Center” is selected or not; if not, please select it again, and then you are able to enjoy the benefi t of CrossFireX TM feature.

Step 7. You can freely enjoy the benefit of CrossFireX TM , 3-Way CrossFireX TM ,

4-Way CrossFireX TM or Quad CrossFireX TM feature.

* CrossFireX TM appearing here is a registered trademark of AMD Technologies Inc., and is

used only for identifi cation or explanation and to the owners’ benefi t, without intent to infringe.

* For further information of AMD CrossFireX TM technology, please check AMD website for

updates and details.


33

2.9 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 22)

Default Clear CMOS

Note: CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just fi nish updating the BIOS, you must boot up the system fi rst, and then shut it down before you do the clear-CMOS action. Please be noted that the password, date, time, user default profi le, 1394

GUID and MAC address will be cleared only if the CMOS battery is removed.

The Clear CMOS Switch has the same function as the Clear CMOS jumper.

34


2.10 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Serial ATA2 Connectors

(SATA2_2_3: see p.2, No. 15)

(SATA2_4_5: see p.2, No. 16)


(SATA3_A1_A2: see p.2, No. 12)

(SATA3_A3_A4: see p.2, No. 13)

(SATA3_0_1: see p.2, No. 14)

These four Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate.

These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. If the eSATA3 port on the rear I/O has been connected, the internal

SATA3_A4 will not function.

Serial ATA (SATA)

Data Cable

(Optional)

Either end of the SATA data cable can be connected to the

SATA / SATA2 / SATA3 hard disk or the SATA2 / SATA3 connector on this motherboard.

Serial ATA (SATA)

Power Cable

(Optional) connect to the SATA

HDD power connector connect to the power supply

Please connect the black end of SATA power cable to the power connector on each drive.

Then connect the white end of

SATA power cable to the power connector of the power supply.

35


USB 2.0 Headers

(9-pin USB2_3)

(see p.2, No. 25)

(9-pin USB4_5)

(see p.2, No. 26)

USB_PWR

P-3

P+3

1

P-2

USB_PWR

(9-pin USB6_7)

(see p.2, No. 27)

Besides two default USB 2.0 ports on the I/O panel, there are three USB 2.0 headers on this motherboard. Each USB 2.0

header can support two USB 2.0 ports.

USB 3.0 Header

DUMMY

Besides eight default USB 3.0

(19-pin USB3_9_10)

Vbus IntA_P5_SSRXports on the I/O panel, there are

IntA_P4_SSRXIntA_P5_SSRX+

(see p.2, No. 10) two USB 3.0 headers on this

IntA_P4_SSRX+ GND

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

IntA_P5_SSTX-

IntA_P5_SSTX+ motherboard. Each USB 3.0

GND header can support two USB 3.0

ports.

IntA_P4_DIntA_P5_D+

IntA_P4_D+

(19-pin USB3_11_12)

(see p.2, No. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

36

Infrared Module Header

(5-pin IR1)

(see p.2, No. 32)

IRTX

+5VSB

DUMMY

1

IRRX

GND

This header supports an optional wireless transmitting and receiving infrared module.

Consumer Infrared Module Header

(4-pin CIR1)

This header can be used to connect the remote

(see p.2 No. 28) receiver.


Front Panel Audio Header

(9-pin HD_AUDIO1)

(see p.2, No. 35)

GND

PRESENCE#

MIC_RET

OUT_RET

This is an interface for front panel audio cable that allows convenient connection and control of audio devices.

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

1. High Defi nition Audio supports Jack Sensing, but the panel wire on the

chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t need

to connect them for AC’97 audio panel.

E. To activate the front mic.

For Windows

®

XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”.

For Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS:

Go to the “FrontMic” Tab in the Realtek Control panel. Adjust

“Recording Volume”.

System Panel Header

(9-pin PANEL1)

This header accommodates several system front panel

(see p.2, No. 20) functions.

Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may confi gure the way to turn off your system using the power switch.

RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the


37

38 system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).

HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assign-ments are matched correctly.

Chassis Speaker Header

(4-pin SPEAKER 1)

(see p.2, No. 21)

Please connect the chassis speaker to this header.

Power LED Header

(3-pin PLED1)

(see p.2, No. 19)

1

PLED-

PLED+

PLED+

Chassis and Power Fan Connectors

(4-pin CHA_FAN1)

(see p.2, No. 30)

(3-pin CHA_FAN2)

(see p.2, No. 29)

(3-pin CHA_FAN3)

(see p.2, No. 44)

(3-pin PWR_FAN1)

(see p.2, No. 3)

Please connect the chassis power LED to this header to indicate system power status.

The LED is on when the system is operating. The LED keeps blinking in S1/S3 state. The

LED is off in S4 state or S5 state (power off).

Please connect the fan cables to the fan connectors and match the black wire to the ground pin.

CHA_FAN1, CHA_FAN2 and

CHA_FAN3 support Fan

Control.


CPU Fan Connectors

(4-pin CPU_FAN1)

(see p.2, No. 4)

4 3 2 1

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Please connect the CPU fan cable to the connector and match the black wire to the

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin

CPU fan still can work successfully even without the fan speed control function.

If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this

motherboard, please connect it to Pin 1-3.

Pin 1-3 Connected

3-Pin Fan Installation

(3-pin CPU_FAN2)

(see p.2, No. 5)

ATX Power Connector

(24-pin ATXPWR1)

(see p.2, No. 8)

12 24

Please connect an ATX power supply to this connector.

1 13

Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply.

To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13.

12

20-Pin ATX Power Supply Installation

1

24

13

ATX 12V Power Connector

(8-pin ATX12V1)

(see p.2, No. 1)

8 5

4 1

Please connect an ATX 12V power supply to this connector.

Though this motherboard provides 8-pin ATX 12V power connector, it can still work if you adopt a traditional 4-pin ATX 12V power supply. To use the 4-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 5.

8 5

4-Pin ATX 12V Power Supply Installation

4 1

39


Serial port Header

(9-pin COM1)

(see p.2, No. 33)

RXTPAM_0

GND

RXTPBM_0

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

This COM1 header supports a serial port module.

HDMI_SPDIF Header

(2-pin HDMI_SPDIF1)

(see p.2, No. 34)

1

GND

SPDIFOUT

HDMI_SPDIF header, providing

SPDIF audio output to HDMI

VGA card, allows the system to connect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to header.

40


2.11 Smart Switches

The motherboard has three smart switches: power switch, reset switch and clear

CMOS switch, allowing users to quickly turn on/off or reset the sytem clear the

CMOS values.

Power Switch

(PWRBTN)

(see p.2 No. 18)

Power Switch is a smart switch, allowing users to quickly turn on/off the system.

Reset Switch

(RSTBTN)

RESET

(see p.2 No. 17)

Reset Switch is a smart switch, allowing users to quickly reset

Clear CMOS Switch

(CLRCBTN)

(see p.3 No. 17) clr

CMOS

Clear CMOS Switch is a smart switch, allowing users to quickly clear the CMOS values.


41

42

2.12 Dr. Debug

Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes.

0x12

0x13

0x14

0x15

0x16

0x17

0x18

0x19

0x1A

0x1B

0x1C

0x1D – 0x2A

0x2B

0x2C

0x2D

0x2E

Status Code

0x00

0x01

0x02

0x03

0x04

0x05

0x06

0x07

0x08

0x09

0x0A

0x0B

0x0C – 0x0D

0x0E

0x0F

0x10

0x11

Description

Not used

Power on. Reset type detection (soft/hard)

AP initialization before microcode loading

North Bridge initialization before microcode loading

South Bridge initialization before microcode loading

OEM initialization before microcode loading

Microcode loading

AP initialization after microcode loading

North Bridge initialization after microcode loading

South Bridge initialization after microcode loading

OEM initialization after microcode loading

Cache initialization

Reserved for future AMI SEC error codes

Microcode not found

Microcode not loaded

PEI Core is started

Pre-memory CPU initialization is started

Pre-memory CPU initialization (CPU module specifi c)



Pre-memory North Bridge initialization is started

Pre-Memory North Bridge initialization (North Bridge module specifi c)



Pre-memory South Bridge initialization is started

Pre-memory South Bridge initialization (South Bridge module specifi c)



OEM pre-memory initialization codes

Memory initialization. Serial Presence Detect (SPD) data reading

Memory initialization. Memory presence detection

Memory initialization. Programming memory timing information

Memory initialization. Confi guring memory

0x2F

0x30

0x31

0x32

Memory initialization (other)

Reserved for ASL

Memory Installed

CPU post-memory initialization is started

0x33

0x34

CPU post-memory initialization. Cache initialization

CPU post-memory initialization. Application Processor(s) (AP) initialization

0x35

0x36

CPU post-memory initialization. Boot Strap Processor (BSP) selection

CPU post-memory initialization. System Management Mode (SMM)

initialization


0xE4-0xE7

0xE8

0xE9

0xEA

0xEB

0xEC-0xEF

0xF0

0xF1

0xF2

0xF3

0xF4

0xF5-0xF7

0xF8

0xF9

0xFA

0xFB – 0xFF

0x60

0x61

0x37

0x38

0x39

0x3A

0x3B

Post-Memory North Bridge initialization is started

Post-Memory North Bridge initialization (North Bridge module specifi c)



Post-Memory South Bridge initialization is started

0x3C

0x3D

0x3E

0x3F-0x4E

Post-Memory South Bridge initialization (South Bridge module specifi c)



OEM post memory initialization codes

0x4F

0x50

DXE IPL is started

Memory initialization error. Invalid memory type or incompatible memory

speed

0x51 Memory initialization error. SPD reading has failed

0x52 Memory initialization error. Invalid memory size or memory modules do not

match

0x53

0x54

Memory initialization error. No usable memory detected

Unspecifi ed memory initialization error

0x55

0x56

0x57

0x58

Memory not installed

Invalid CPU type or Speed

CPU mismatch

CPU self test failed or possible CPU cache error

0x59

0x5A

0x5B

0x5C-0x5F

0xE0

0xE1

0xE2

0xE3

CPU micro-code is not found or micro-code update is failed

Internal CPU error reset PPI is not available

Reserved for future AMI error codes

S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)

S3 Boot Script execution

Video repost

OS S3 wake vector call

Reserved for future AMI progress codes

S3 Resume Failed

S3 Resume PPI not Found

S3 Resume Boot Script Error

S3 OS Wake Error


Recovery condition triggered by fi rmware (Auto recovery)

Recovery condition triggered by user (Forced recovery)

Recovery process started

Recovery fi rmware image is found

Recovery fi rmware image is loaded

Reserved for future AMI progress codes

Recovery PPI is not available

Recovery capsule is not found

Invalid recovery capsule


DXE Core is started

NVRAM initialization


43

44

0x90

0x91

0x92

0x93

0x94

0x95

0x96

0x97

0x74

0x75

0x76

0x77

0x78

0x79

0x7A – 0x7F

0x80 – 0x8F

0x6C

0x6D

0x6E

0x6F

0x70

0x71

0x72

0x73

0x62

0x63

0x64

0x65

0x66

0x67

0x68

0x69

0x6A

0x6B

0x98

0x99

0x9A

0x9B

0x9C

0x9D

0x9E – 0x9F

0xA0

0xA1

0xA2

0xA3

0xA4

0xA5

Installation of the South Bridge Runtime Services

CPU DXE initialization is started

CPU DXE initialization (CPU module specifi c)




PCI host bridge initialization

North Bridge DXE initialization is started

North Bridge DXE SMM initialization is started

North Bridge DXE initialization (North Bridge module specifi c)





South Bridge DXE initialization is started

South Bridge DXE SMM initialization is started

South Bridge devices initialization

South Bridge DXE Initialization (South Bridge module specifi c)





ACPI module initialization

CSM initialization

Reserved for future AMI DXE codes

OEM DXE initialization codes

Boot Device Selection (BDS) phase is started

Driver connecting is started

PCI Bus initialization is started

PCI Bus Hot Plug Controller Initialization

PCI Bus Enumeration

PCI Bus Request Resources

PCI Bus Assign Resources

Console Output devices connect

Console input devices connect

Super IO Initialization

USB initialization is started

USB Reset

USB Detect

USB Enable

Reserved for future AMI codes

IDE initialization is started

IDE Reset

IDE Detect

IDE Enable

SCSI initialization is started

SCSI Reset


0xB0

0xB1

0xB2

0xB3

0xB4

0xB5

0xB6

0xB7

0xA6

0xA7

0xA8

0xA9

0xAA

0xAB

0xAC

0xAD

0xAE

0xAF

0xB8 – 0xBF

0xC0 – 0xCF

0xD0

0xD1

0xD2

0xD3

0xD4

0xD5

0xD6

0xD7

0xD8

0xD9

0xDA

0xDB

0xDC

SCSI Detect

SCSI Enable

Setup Verifying Password

Start of Setup

Reserved for ASL (see ASL Status Codes section below)

Setup Input Wait

Reserved for ASL (see ASL Status Codes section below)

Ready To Boot event

Legacy Boot event

Exit Boot Services event

Runtime Set Virtual Address MAP Begin

Runtime Set Virtual Address MAP End

Legacy Option ROM Initialization

System Reset

USB hot plug

PCI bus hot plug

Clean-up of NVRAM

Confi guration Reset (reset of NVRAM settings)

Reserved for future AMI codes

OEM BDS initialization codes

CPU initialization error

North Bridge initialization error

South Bridge initialization error

Some of the Architectural Protocols are not available

PCI resource allocation error. Out of Resources

No Space for Legacy Option ROM

No Console Output Devices are found

No Console Input Devices are found

Invalid password

Error loading Boot Option (LoadImage returned error)

Boot Option is failed (StartImage returned error)

Flash update is failed

Reset protocol is not available


45

46

2.13 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive fi rst. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.

2.14 Installing Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit

With RAID Functions

If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit on your SATA

/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

2.15 Installing Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit /

XP / XP 64-bit Without RAID Functions

If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow below procedures according to the OS you install.

2.15.1 Installing Windows

®

XP / XP 64-bit Without RAID

Functions

If you want to install Windows ® XP / XP 64-bit OS on your SATA / SATA2 / SATA3

HDDs without RAID functions, please follow below steps.

AHCI mode is not supported under Windows ® XP / XP 64-bit.

Using SATA / SATA2 / SATA3 HDDs without NCQ function

STEP 1: Set Up UEFI.

A. Enter UEFI SETUP UTILITY Advanced screen Storage Confi guration.

B. Set the option “SATA Mode Selection” to [IDE] for SATA2_2 to SATA2_5 and

SATA3_0 and SATA3_1 ports.

Set the option “ASMedia SATA3 Mode” to [IDE] for SATA3_A1 to SATA3_A4

ports.

STEP 2: Install Windows ® XP / XP 64-bit OS on your system.


2.15.2 Installing Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit

Without RAID Functions

If you want to install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your SATA

/ SATA2 / SATA3 HDDs without RAID functions, please follow below steps.

Using SATA / SATA2 / SATA3 HDDs without NCQ function



B. Set the option “SATA Mode Selection” to [IDE] for SATA2_2 to SATA2_5 and


Set the option “ASMedia SATA3 Mode” to [IDE] for SATA3_A1 to SATA3_A4

ports.

STEP 2: Install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your

system.

Using SATA / SATA2 / SATA3 HDDs with NCQ function



B. Set the option “SATA Mode Selection” to [AHCI] for SATA2_2 to SATA2_5 and


Set the option “ASMedia SATA3 Mode” to [AHCI] for SATA3_A1 to SATA3_A4

ports.

STEP 2: Install Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your

system.


47

2.16 Teaming Function Operation Guide

Dual LAN with Teaming function enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant images. Fault tolerance on the dual LAN network prevents network downtime by transferring the workload from a failed port to a working port.

The speed of transmission is subject to the actual network environment or status even with Teaming enabled.

Before setting up Teaming function, please make sure if your Switch (or Router) could support Teaming (IEEE 802.3ad Link Aggregation) function. Then, please refer to following steps to set up Teaming function.

1. Install Teaming driver from the following path of motherboard Support CD:

32-bit: .. \Drivers\LAN\Broadcom\Teaming\IA32

64-bit: .. \Drivers\LAN\Broadcom\Teaming\x64

(This is a special driver for Teaming function only. If you don't want to use

Teaming, please install the LAN driver provided by our support CD link.)

2. From the Teams menu, select Create Team, or right-click one of the devices in

the “Unassigned Adapters” section and select Create a Team. This option is not

available if there are no devices listed in the “Unassigned Adapters” sections,

which means all adapters are already assigned to teams.

3. Click Expert Mode.

* If you want to always use Expert Mode to create a team, click Default to Expert

Mode on next start.

48


4. Click the Create Team tab.

* The Create Team tab appears only if there are teamable adapters available.

5. Click the Team Name fi eld to enter a team name.

6. Click the Team Type fi eld to select a team type.

7. Assign any available adapter or adapters to the team by selecting the adapter

from the Load Balance Members list. There must be at least one adapter

selected in the Load Balance Members list.

8. You can assign any other available adapter to be a standby member by selecting

it from the Standby Member list.

* There must be at least one Broadcom network adapter assigned to the team.

The Large Send Offl oad (LSO), Checksum Offl oad (CO), and RSS indicate if

the LSO, CO, and/or RSS properties are supported for the team. The LSO, CO,

and RSS properties are enabled for a team only when all of the members

support and are confi gured for the feature.

* Adding a network adapter to a team where its driver is disabled may negatively

affect the offl oading capabilities of the team. This may have an impact on the

team’s performance. Therefore, it is recommended that only driver-enabled

network adapters be added as members to a team.

49


9. Type the value for Team MTU.

10. Click Create to save the team information.

11. Repeat steps 5. through 10. to defi ne additional teams. As teams are defi ned,

they can be selected from the team list, but they have not yet been created.

Click the Preview tab to view the team structure before applying the changes.

12. Click Apply/Exit to create all the teams you have defi ned and exit the Manage

Teams window.

13. Click Yes when the message is displayed indicating that the network connection

will be temporarily interrupted.

* The team name cannot exceed 39 characters, cannot begin with spaces, and

cannot contain any of the following characters: & \ / : * ? < > |

* Team names must be unique. If you attempt to use a team name more than

once, an error message is displayed indicating that the name already exists.

* The maximum number of team members is 8.

* When team confi guration has been correctly performed, a virtual team adapter

driver is created for each confi gured team.

* If you disable a virtual team and later want to reenable it, you must fi rst disable

and reenable all team members before you reenable the virtual team.

* When you create Generic Trunking and Link Aggregation teams, you cannot

designate a standby member. Standby members work only with Smart Load

Balancing and Failover and SLB (Auto-Fallback Disable) types of teams.

* For an SLB (Auto-Fallback Disable) team, to restore traffi c to the load

balance members from the standby member, click the Fallback button on the

Team Properties tab.

* When confi guring an SLB team, although connecting team members to a hub

is supported for testing, it is recommended to connect team members to a

switch.

50

* Not all network adapters made by others are supported or fully certifi ed for

teaming.


14. Confi gure the team IP address.

a. From Control Panel, double-click Network Connections.

b. Right-click the name of the team to be confi gured, and then click Properties.

c. On the General tab, click Internet Protocol (TCP/IP), and then click

Properties.

d. Confi gure the IP address and any other necessary TCP/IP confi guration for

the team, and then click OK when fi nished.


51

3. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up the computer, please press <F2> or <Del> during the Power-On-Self-Test (POST) to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl>

+ <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS

Setup program is designed to be user-friendly. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. For the detailed information about BIOS Setup, please refer to the

User Manual (PDF fi le) contained in the Support CD.

4. Software Support CD information

This motherboard supports various Microsoft ® Windows ® operating systems: 7 / 7

64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the fi le “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

52


1. Einführung

Wir danken Ihnen für den Kauf des ASRock Z77 WS Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit. Diese Schnellinstallationsanleitung führt in das Motherboard und die schrittweise Installation ein. Details

über das Motherboard fi nden Sie in der Bedienungsanleitung auf der Support-CD.

Da sich Motherboard-Spezifi kationen und BIOS-Software verändern können, kann der Inhalt dieses Handbuches ebenfalls jederzeit geändert werden. Für den Fall, dass sich Änderungen an diesem Handbuch ergeben, wird eine neue

Version auf der ASRock-Website, ohne weitere Ankündigung, verfügbar sein.

Die neuesten Grafi kkarten und unterstützten CPUs sind auch auf der ASRock-

ASRock-Website: http://www.asrock.com

Wenn Sie technische Unterstützung zu Ihrem Motherboard oder spezifi sche

Informationen zu Ihrem Modell benötigen, besuchen Sie bitte unsere Webseite:


1.1 Kartoninhalt

ASRock Z77 WS Motherboard

(ATX-Formfaktor: 30.5 cm x 24.4 cm; 12.0 Zoll x 9.6 Zoll)

ASRock Z77 WS Schnellinstallationsanleitung

ASRock Z77 WS Support-CD

Sechs Serial ATA (SATA) -Datenkabel (optional)

Ein Serial ATA (SATA) -Festplattenstromkabel (optional)

Ein I/O Shield

Zwei ASRock SLI_Bridge Karte

Ein ASRock SLI_Bridge_3S-Karte

Ein ASRock 3-Wege-SLI-Brücke-Karte

ASRock erinnert...

Zur besseren Leistung unter Windows ® 7 / 7, 64 Bit / Vista TM / Vista TM

64 Bit empfehlen wir, die Speicherkonfi guration im BIOS auf den AHCI-

Modus einzustellen. Hinweise zu den BIOS-Einstellungen fi nden Sie in der Bedienungsanleitung auf der mitgelieferten CD.

53


54

Plattform

CPU

Chipsatz

Speicher

Erweiterungs-

steckplätze

Onboard-VGA

1.2 Spezifi kationen

- ATX-Formfaktor: 30.5 cm x 24.4 cm; 12.0 Zoll x 9.6 Zoll

- Hochwertiges Gold-Kondensatordesign (100 % hochwertige

japanische Fertigung leitfähiger Polymerkondensatoren)

- Unterstützt Intel ® Core TM i7- / i5- / i3-Prozessoren der 3ten

und 2ten Generation im LGA1155-Package

- Digi Power-Design

- 8 + 4-Stromphasendesign

- Unterstützt Intel ® Turbo Boost 2.0-Technologie

- Unterstützt freigegebene CPU der K-Serie

- Intel ® Z77

- Unterstützt Intel ® Rapid Start Technology und Smart

Connect Technology

- Dual-Kanal DDR3 Speichertechnologie

- 4 x Steckplätze für DDR3

- Unterstützt DDR3 3000+(OC)/2400(OC)/2133(OC)/1866

(OC)/1600/1333/1066 no n-ECC, ungepufferter Speicher

- Max. Kapazität des Systemspeichers: 32GB

- Unterstützt Intel ® Extreme Memory Profi le (XMP)1.3/1.2

- 5 x PCI-Express-3.0-x16-Steckplätze (PCIE2: x16-Modus

oder PCIE1/PCIE3/PCIE5/PCIE7: x16/0/16/0-Modus oder

x8/8/8/8-Modus)

* PCIE 3.0 wird nur mit Intel ® Ivy Bridge-Prozessor

unterstützt. Mit Intel ® Sandy Bridge-Prozessor wird nur

PCIE 2.0 unterstützt.

- 1 x PCI Express 2.0 x16-Steckplätze (PCIE4: x4-Modus)

- 1 x PCI Express 2.0 x1-Steckplätze

- Unterstützt AMD Quad CrossFireX TM , 4-Way CrossFireX TM ,

3-Way CrossFireX TM und CrossFireX TM

TM , 3-Way SLI TM und SLI TM

* Integrierte Intel ® HD-Grafi kdarstellungen und die VGA-

Ausgänge können nur durch GPU-integrierte Prozessoren

unterstützt werden.

- Unterstützt hochaufl ösende integrierte Intel ® -Grafi klösungen:

Intel ® Quick-Sync-Video 2.0, Intel ® InTru TM 3D, Intel ® Clear-

Video-Technik (HD), Intel ® Insider TM , Intel ® HD Graphics

2500/4000

- Pixel Shader 5.0, DirectX 11 mit Intel ® Ivy Bridge-Prozessor,

Pixel Shader 4.1, DirectX 10.1 mit Intel ® Sandy Bridge-

Prozessor


- Maximal gemeinsam genutzter Speicher 1760MB

- Unterstützt HDMI 1.4a mit einer maximalen Aufl ösung von

1920 x 1200 bei 60 Hz

- Unterstützt Auto Lip Sync, Deep Color (12bpc), xvYCC und

HBR (High Bit Rate-Audio) mit HDMI (kompatibler HDMI-

Bildschirm erforderlich)

- Unterstützt HDCP-Funktion mit HDMI-Port

- Unterstutzt 1080p Blu-ray (BD) / HD-DVD-Wiedergabe mit

HDMI-Port

LAN


- Premium Blu-ray-Audio-Unterstützung


- Broadcom BCM57781

- Unterstützt Wake-On-LAN

- Unterstützt energieeffi zientes Ethernet 802.3az

- Unterstützt Dual-LAN mit Teaming-Funktion

Lagerung

- Unterstützt PXE

- 2 x SATA3-Anschlüsse (6,0 Gb/s) durch Intel ® Z77;

unterstützt RAID- (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage und Intel Smart Response-Technologie),

NCQ-, AHCI-und „Hot Plug“ (Hot-Plugging)-Funktionen

- 4 x SATA 3-Anschlüsse (6,0 Gb/s) durch ASMedia

ASM1061; unterstützt NCQ-, AHCI-und „Hot Plug“ (Hot-

Plugging)-Funktionen (SATA3_A4-Anschluss wird mit dem

eSATA3-Port geteilt)

- 4 x SATA2-Anschlüsse (3,0 Gb/s) durch Intel ® Z77;

unterstützt RAID- (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage und Intel Smart Response-Technologie),

NCQ-, AHCI-und „Hot Plug“ (Hot-Plugging)-Funktionen

E/A-Anschlüsse I/O Panel

an der Rückseite - 1 x PS/2-Tastaturanschluss/Mausanschluss

- 1 x HDMI port

- 1 x optischer SPDIF-Ausgang

- 2 x Standard-USB 2.0-Anschlüsse

- 1 x eSATA3-Anschluss

- 8 x Standard-USB 3.0-Anschlüsse

- 2 x RJ-45 LAN Ports mit LED (ACT/LINK LED und SPEED

LED)

- 1 x IEEE 1394 Port

- 1 x CMOS löschen-Schalter mit LED

55


BIOS

USB3.0

Anschlüsse

- HD Audiobuchse: Lautsprecher hinten / Mitte / Bass /

Audioeingang / Lautsprecher vorne / Mikrofon

- 4 x USB 3.0-Ports an der Rückseite durch Intel ® Z77,

unterstützt USB 1.0/2.0/3.0 mit bis zu 5 Gb/s

- 4 x USB 3.0-Ports an der Rückseite durch Etron EJ188,

unterstützt USB 1.0/2.0/3.0 mit bis zu 5 Gb/s

- 2 x USB 3.0-Header (unterstützt vier USB 3.0-Ports) an

der Vorderseite durch Etron EJ188, unterstützt

USB 1.0/2.0/3.0 mit bis zu 5 Gb/s

- 1 x Infrarot-Modul-Header

- 1 x Consumer Infrared-Modul-Header

- 1 x COM-Anschluss-Header

- 1 x HDMI_SPDIF-Anschluss

- 1 x IEEE 1394-Anschluss

- 1 x Betriebs-LED-Header

- 2 x CPU lüfter-Anschluss (1 x 4-pin, 1 x 3-pin)

- 3 x Gehäuse lüfter-Anschluss (1 x 4-pin, 2 x 3-pin)

- 1 x Strom lüfter-Anschluss (3-pin)

- 8-pin anschluss für 12V-ATX-Netzteil

- Anschluss für Audio auf der Gehäusevorderseite

- 3 x USB 2.0-Anschlüsse (Unterstützung 6 zusätzlicher

USB 2.0-Anschlüsse)

- 2 x USB 3.0-Anschlüsse (Unterstützung 4 zusätzlicher

USB 3.0-Anschlüsse)

- 1 x Dr. Debug (Debug-LED mit 7 Segmenten)

- 1 x Netzschalter mit LED

- 1 x Rücksetzschalter (Reset) mit LED

- 1 x CMOS löschen-Schalter mit LED

- 64Mb AMIs Legal BIOS UEFI mit GUI-Unterstützung

- Unterstützung für “Plug and Play”

56

- SMBIOS 2.3.1

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA

Stromspannung Multianpassung

CD d’assistance - Treiber, Dienstprogramme, Antivirussoftware (Probeversion),

CyberLink MediaEspresso 6.5-Testversion, ASRock

MAGIX-Multimedia-Suite - OEM

Hardware Monitor - Überwachung der CPU-Temperatur


- Drehzahlmessung für CPU/Gehäuse/Strom lüfter

- Geräuscharmer CPU-/Gehäuselüfter (ermöglicht die au

tomatische Anpassung der Gehäuselüftergeschwindigkeit

durch CPU-Temperatur)

lüfter

- Spannungsüberwachung: +12V, +5V, +3.3V, Vcore

Betriebssysteme - Unterstützt Microsoft ® Windows ® 7 / 7 64-Bit / Vista TM /

Vista TM 64-Bit / XP / XP 64-Bit

Zertifi zierungen - FCC, CE, WHQL

- Gemäß Ökodesign-Richtlinie (ErP/EuP) (Stromversorgung

gemäß Ökodesign-Richtlinie (ErP/EuP) erforderlich)

* Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website:

http://www.asrock.com


57

1.3 Einstellung der Jumper

Die Abbildung verdeutlicht, wie Jumper gesetzt werden. Werden Pins durch

Jumperkappen verdeckt, ist der Jumper

“Gebrückt”. Werden keine Pins durch

Jumperkappen verdeckt, ist der Jumper

“Offen”. Die Abbildung zeigt einen 3-Pin

Jumper dessen Pin1 und Pin2 “Gebrückt” sind, bzw. es befi ndet sich eine

Jumper-Kappe auf diesen beiden Pins.

CMOS löschen

(CLRCMOS1, 3-Pin jumper)

(siehe S.2, No. 22)

Default-

Einstellung

CMOS löschen

Löschen und Zurücksetzen der Systemparameter auf die Standardeinrichtung schalten Sie den Computer bitte aus und trennen das Netzkabel von der

Stromversorgung. Warten Sie 15 Sekunden, schließen Sie dann Pin2 und

Pin3 am CLRCMOS1 über einen Jumper fünf Sekunden lang kurz. Sie sollten das CMOS allerdings nicht direkt nach der BIOS-Aktualisierung löschen. Wenn Sie das CMOS nach Abschluss der BIOS-Aktualisierung löschen müssen, fahren Sie zuerst das System hoch. Fahren Sie es dann vor der CMOS-Löschung herunter. Bitte beachten Sie, dass Kennwort,

Datum, Uhrzeit, benutzerdefi niertes Profi l, 1394 GUID und MAC-Adresse nur gelöscht werden, wenn die CMOS-Batterie entfernt wird.

Der CMOS löschen-Schalter hat dieselbe Funktion wie der CMOS löschen-Jumper.

58


1.4 Integrierte Header und Anschlüsse

Integrierte Header und Anschlüsse sind KEINE Jumper. Setzen Sie KE-

INE Jumperkappen auf diese Header und Anschlüsse. Wenn Sie Jumperkappen auf Header und Anschlüsse setzen, wird das Motherboard unreparierbar beschädigt!

Seriell-ATA2-Anschlüsse Diese vier Serial ATA2-

(SATA2_2_3: siehe S.2 - No. 15) (SATA2-)Verbínder

(SATA2_4_5: siehe S.2 - No. 16) SATA-Datenkabel aktuelle SATA2- Schnittstelle

Seriell-ATA3-Anschlüsse Diese sechs Serial ATA3-

(SATA3_A1_A2: siehe S.2 - No. 12) (SATA3-)Verbínder

(SATA3_A3_A4: siehe S.2 - No. 13) SATA-Datenkabel

(SATA3_0_1: siehe S.2 - No. 14) interne aktuelle SATA3- Schnittstelle

Datenübertragungsrate bis 6,0

Gb/s. Wenn Sie die

Festplatte am eSATA3-Port an der Rückblende anschließen, wird der interne SATA3_A4-

Serial ATA- (SATA-)

Datenkabel

(Option)

SJedes Ende des SATA

Datenkabels kann an die SATA

/ SATA2 / SATA3 Festplatte oder das SATA2 / SATA3

Verbindungsstück auf dieser

werden.

59


Serial ATA- (SATA-)

Stromversorgungskabel

(Option)

Verbindung zum

SATA-HDD-Stromanschluss

Verbindung zum

Verbinden Sie das schwarze

Ende des SATA-Netzkabels mit dem Netzanschluss am

Laufwerk. Verbinden Sie dann das weiße Ende des SATAdem Stromanschluss des

Netzteils.

USB 2.0-Header

(9-pol. USB2_3)

USB_PWR

P-3

P+3

Zusätzlich zu den zwei

üblichen USB 2.0-Ports an den

(siehe S.2 - No. 25) befi nden sich

1 drei USB 2.0- Anschlussleisten

GND

P+2

P-2

USB_PWR am Motherboard. Pro USB 2.0-

(9-pol. USB4_5) Anschlussleiste werden zwei

(siehe S.2 - No. 26) USB 2.0-Ports unterstützt.

(9-pol. USB6_7)

(siehe S.2 - No. 27)

60

USB 3.0-Header

(19-pol. USB3_9_10) 3.0-Ports am E/A-Panel

Vbus IntA_P5_SSRX-

(siehe S.2 - No. 10) befi ndet sich zwei USB 3.0-

IntA_P4_SSRX+ GND

GND IntA_P5_SSTX-

Header an diesem

IntA_P4_SSTX-

IntA_P4_SSTX+

IntA_P5_SSTX+

Neben acht Standard-USB

GND

GND

IntA_P5_D-

Motherboard. Pro USB 3.0-

Anschlussleiste werden zwei

IntA_P4_D-

IntA_P4_D+

IntA_P5_D+

DUMMY

USB 3.0-Ports unterstützt.

(19-pol. USB3_11_12)

(siehe S.2 - No. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY


Infrarot-Modul-Header

(5-pin IR1)

IRTX

+5VSB

DUMMY

Dieser Header unterstützt ein optionales, drahtloses Sende-

(siehe S.2 - No. 32) Empfangs-Infrarotmodul.

1

IRRX

GND

Consumer Infrared-Modul-Header Dieser Header kann zum

(4-pin CIR1) Remote-

(siehe S.2 - No. 28) Empfänger.

Anschluss für Audio auf der Gehäusevorderseite

(9-Pin HD_AUDIO1)


GND

PRESENCE#

OUT_RET

Dieses Interface zu einem

Audio-Panel auf der Vorder seite Ihres Gehäuses, ermöglicht Ihnen eine bequeme

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

1. High Defi nition Audio unterstützt Jack Sensing (automatische Erkennung falsch

angeschlossener Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse

HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der

Installation im System die Anweisungen in unserem Handbuch und im

Gehäusehandbuch.

2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie

nachstehend beschrieben an der Front-Audioanschlussleiste:

A. Schließen Sie Mic_IN (MIC) an MIC2_L an.

B. Schließen Sie Audio_R (RIN) an OUT2_R und Audio_L (LIN) an OUT2_L an.

C. Schließen Sie Ground (GND) an Ground (GND) an.

D. MIC_RET und OUT_RET sind nur für den HD-Audioanschluss gedacht. Diese

Anschlüsse müssen nicht an die AC’97-Audioleiste angeschlossen werden.

E. So aktivieren Sie das Mikrofon an der Vorderseite.

Bei den Betriebssystemen Windows ® XP / XP 64 Bit:

Wählen Sie „Mixer“. Wählen Sie „Recorder“ (Rekorder). Klicken Sie dann auf

„FrontMic“ (Vorderes Mikrofon).

Bei den Betriebssystemen Windows ® 7 / 7 64 Bit / Vista TM / Vista TM 64 Bit:

Wählen Sie im Realtek-Bedienfeld die „FrontMic“ (Vorderes Mikrofon)-

Registerkarte. Passen Sie die „Recording Volume“ (Aufnahmelautstärke) an.

System Panel-Header

(9-pin PANEL1)

Dieser Header unterstützt mehrere Funktion der

(siehe S.2 - No. 20) Systemvorderseite.

61


Schließen Sie die Ein-/Austaste, die Reset-Taste und die

Systemstatusanzeige am Gehäuse an diesen Header an; befolgen Sie dabei die nachstehenden Hinweise zur Pinbelegung. Beachten Sie die positiven und negativen Pins, bevor Sie die Kabel anschließen.

PWRBTN (Ein-/Ausschalter):

Zum Anschließen des Ein-/Ausschalters an der Frontblende des Gehäu ses. Sie können konfi gurieren, wie das System mit Hilfe des

Ein-/Ausschalters ausgeschaltet werden können soll.

RESET (Reset-Taste):

Zum Anschließen der Reset-Taste an der Frontblende des Gehäuses.

Mit der Reset-Taste können Sie den Computer im Falle eines Absturzes

PLED (Systembetriebs-LED):

Zum Anschließen der Betriebsstatusanzeige an der Frontblende des

Gehäuses. Die LED leuchtet, wenn das System in Betrieb ist. Die LED blinkt, wenn sich das System im Ruhezustand S1/S3 befi ndet. Die LED schaltet sich aus, wenn sich das System in den Modi S4 befi ndet oder ausgeschaltet ist (S5).

HDLED (Festplattenaktivitäts-LED):

Zum Anschließen der Festplattenaktivitäts-LED an der Frontblende des

Gehäuses. Die LED leuchtet, wenn die Festplatte Daten liest oder schreibt.

Das Design der Frontblende kann je nach Gehäuse variiere. Ein

Frontblendenmodul besteht hauptsächlich aus einer Ein-/Austaste, einer

Reset-Taste, einer Betriebs-LED, einer Festplattenaktivitäts-LED,

Lautsprechern, etc. Stellen Sie beim Anschließen des

Frontblendenmoduls Ihres Gehäuses an diesem Header sicher, dass die

Kabel- und Pinbelegung korrekt übereinstimmen.

62

Gehäuselautsprecher-Header Schließen Sie den

(4-pin SPEAKER1) an

(siehe S.2 - No. 21) diesen Header an.

Betriebs-LED-Header

(3-pin PLED1)


1

PLED-

PLED+

Bitte schließen Sie die

Betriebs-LED des Gehäuses zur Anzeige des diesem Header an. Die LED leuchtet, wenn das System in

Betrieb ist. Die LED blinkt im

S1/S3-Zustand. Im S4- oder leuchtet die LED nicht.


Gehäuse und Strom lüfteranschlüsse

(4-pin CHA_FAN1)

(siehe S.2, No. 30)

(3-pin CHA_FAN2)


(3-pin CHA_FAN3)


(3-pin PWR_FAN1)

(siehe S.2 - No. 3)

Verbinden Sie die Lüfterkabel mit den Lüfteranschlüssen, wobei der schwarze Draht an angeschlossenwird.

CHA_FAN1- , CHA_FAN2- und

CHA_FAN3unterstützen

Lüftersteuerung.

CPU-Lüfteranschluss

(4-pin CPU_FAN1)

4 3 2 1

Verbinden Sie das CPU -

Lüfterkabel mit diesem

(siehe S.2 - No. 4) Anschluss und passen Sie den

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL schwarzen Draht dem

Erdungsstift

Obwohl dieses Motherboard einen vierpoligen CPU-Lüfteranschluss

(Quiet Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn

Sie einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses

Motherboards anschließen möchten, verbinden Sie ihn bitte mit den

Pins 1 – 3.

Pins 1–3 anschließen

Lüfter mit dreipoligem Anschluss installieren

(3-pin CPU_FAN2)

(sieche S.2 - No. 5)

ATX-Netz-Header

(24-pin ATXPWR1)

12 24

Verbinden Sie die ATX-

Stromversorgung mit diesem

(siehe S.2 - No. 8) Header.

1 13

Obwohl dieses Motherboard einen 24-pol. ATX-

Stromanschluss bietet, kann es auch mit einem

modifi zierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und

12

Installation eines 20-pol. ATX-Netzteils 1

24

24

13

13

63


64

ATX 12V Anschluss

8 5

Bitte schließen Sie an diesen

(8-pin ATX12V1) Anschluss die ATX 12V

(siehe S.2 - No. 1)

4 1 an.

Obwohl diese Hauptplatine 8-Pin ATX 12V Stromanschluss zur Verfügung stellt, kann sie noch arbeiten, wenn Sie einen traditionellen 4-Pin ATX 12V

Energieversorgung adoptieren. Um die 4-Pin ATX Energieversorgung zu verwenden, stecken Sie bitte Ihre Energieversorgung zusammen mit dem

Pin 1 und Pin 5 ein.

8 5

Installation der 4-Pin ATX 12V Energieversorgung

4 1

SLI/XFIRE-Stromanschluss

(4-pin SLI/XFIRE_PWR1)


SLI/XFIRE_POWER1

Sie müssen diesen Anschluss nicht zwingend verwenden.

Wenn allerdings zwei

Grafi kkarten gleichzeitig am

Motherboard angeschlossen sind, verbinden Sie diesen

Festplatten-Stromversorgungsstecker.

IEEE-1394 Header

(9-pin FRONT_1394)


RXTPAM_0

GND

RXTPBM_0

+12V

GND

+12V

RXTPBP_0

GND

RXTPAP_0

Außer einem vorgegebenem

IEEE-1394 Port auf dem Ein-/

Ausgabe Paneel, gibt es einen

(FRONT_1394) auf dieser

Hauptplatine. Dieser IEEE-1394

Header kann einen IEEE-1394

COM-Anschluss-Header

(9-pin COM1)

Dieser COM-Anschluss- Header wird verwendet, um ein

(siehe S.2 - No. 33) COM-Anschlussmodul zu

unterstützen.


(2-pin HDMI_SPDIF1)


1

GND

SPDIFOUT stellt einen SPDIF-

Audioausgang für eine HDMI-

VGA-Karte zur Verfügung und ermöglicht den Anschluss von

LCD-Geräten an das System.

Bitte verbinden Sie den

HDMI-VGA-Karte mit diesem

Anschluss.

1.5 Schnellschalter

Dieses Motherboard besitzt drei Schnellschalter: Netzschalter, Rücksetzschalter

(Reset) und CMOS löschen-Schalter, mit denen Benutzer das System schnell ein-/ ausschalten oder zurücksetzen oder die CMOS-Werte löschen können.

Netzschalter

(PWRBTN)


Der Netzschalter ist ein

Schnellschalter, mit dem

Benutzer das System schnell

Rücksetzschalter (Reset)

(RSTBTN)


CMOS löschen-Schalter

(CLRCBTN)


Der Rücksetzschalter (Reset) ist ein Schnellschalter, mit dem

Benutzer das System schnell

Der CMOS löschen-Schalter ist ein Schnellschalter, mit dem

Benutzer die CMOS-Werte schnell löschen können.


65

2. BIOS-Information

Das Flash Memory dieses Motherboards speichert das Setup-Utility. Drücken Sie

<F2> oder <Del> während des POST (Power-On-Self-Test) um ins Setup zu gelangen, ansonsten werden die Testroutinen weiter abgearbeitet. Wenn Sie ins Setup gelangen wollen, nachdem der POST durchgeführt wurde, müssen Sie das System

über die Tastenkombination <Ctrl> + <Alt> + <Delete> oder den Reset-Knopf auf der Gehäusevorderseite, neu starten. Natürlich können Sie einen Neustart auch durchführen, indem Sie das System kurz ab- und danach wieder anschalten.

Das Setup-Programm ist für eine bequeme Bedienung entwickelt worden. Es ist ein menügesteuertes Programm, in dem Sie durch unterschiedliche Untermenüs scrollen und die vorab festgelegten Optionen auswählen können. Für detaillierte

Informationen zum BIOS-Setup, siehe bitte das Benutzerhandbuch (PDF Datei) auf der Support CD.

3. Software Support CD information

Dieses Motherboard unterstützt eine Reiche von Microsoft ® Windows ® Betriebssystemen: 7 / 7 64-Bit / Vista TM / Vista TM 64-Bit / XP / XP 64-Bit. Die Ihrem Motherboard beigefügte Support-CD enthält hilfreiche Software, Treiber und Hilfsprogramme, mit denen Sie die Funktionen Ihres Motherboards verbessern können Legen Sie die

Support-CD zunächst in Ihr CD-ROM-Laufwerk ein. Der Willkommensbildschirm mit den Installationsmenüs der CD wird automatisch aufgerufen, wenn Sie die

“Autorun”-Funktion Ihres Systems aktiviert haben.

Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File

ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen.

Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

66


1. Introduction

Merci pour votre achat d’une carte mère ASRock Z77 WS, une carte mère très fi able produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fi abilité au long terme.

Ce Guide d’installation rapide présente la carte mère et constitue un guide d’installation pas à pas. Des informations plus détaillées concernant la carte mère pourront être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance.

contenu de ce manuel est sujet à des changements sans notifi cation. Au cas où n’importe qu’elle modifi cation intervenait sur ce manuel, la version mise à jour serait disponible sur le site web ASRock sans nouvel avis.

Vous trouverez les listes de prise en charge des cartes VGA et CPU

également sur le site Web ASRock.

Site web ASRock, http://www.asrock.com

Si vous avez besoin de support technique en relation avec cette carte mère, veuillez consulter notre site Web pour de plus amples informations particulières au modèle que vous utilisez.


1.1 Contenu du paquet

Carte mère ASRock Z77 WS

(Facteur de forme ATX: 12.0 pouces x 9.6 pouces, 30.5 cm x 24.4 cm)

Guide d’installation rapide ASRock Z77 WS

CD de soutien ASRock Z77 WS

Six câbles de données de série ATA (SATA) (en option)

Un câble d’alimentation de série ATA (SATA) HDD (en option)

Un I/O Panel Shield

Deux carte Pont_ASRock SLI

Un carte 3S_Pont_ASRock SLI

Un carte pont à trois voies SLI ASRoc

ASRock vous rappelle...

Pour bénéfi cier des meilleures performances sous Windows ® 7 / 7 64 bits

/ Vista TM / Vista TM 64 bits, il est recommandé de paramétrer l'option BIOS dans Confi guration de stockage en mode AHCI. Pour plus de détails sur l'installation BIOS, référez-vous au "Mode d'emploi" sur votre CD de support.

67


68

1.2 Spécifi cations

Format

CPU

- Facteur de forme ATX:

12.0 pouces x 9.6 pouces, 30.5 cm x 24.4 cm

- Design de condensateur Premium Gold (condensateurs

polymère conducteur de qualité supérieure 100% fabriqués

au Japon)

- Prend en charge les processeurs Intel ® Core TM i7 / i5 / i3

Chipsets

Mémoire

2ème et 3ème génération sur socket LGA1155

- Conception Digi Power

- 8 + 4 Power Phase conception

- Prend en charge la technologie Intel ® Turbo Boost 2.0

- Prise en charge des unités centrales non verrouillées de

série K

- Intel ® Z77

- Prend en charge les technologies Intel ® Rapid Start et Smart

Connect

- Compatible avec la Technologie de Mémoire à Canal

Double

- 4 x slots DIMM DDR3

- Supporter DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)

/1600/1333/1066 non-ECC, sans amortissement mémoire

- Capacité maxi de mémoire système: 32GB

- Prend en charge le profi l de mémoire extrême Intel ® (XMP)

1.3/1.2

Slot d’extension - 5 x slots PCI Express 3.0 x16 (PCIE2 : mode x16 ou

PCIE1/PCIE3/PCIE5/PCIE7 : mode x16/0/16/0 ou mode

x8/8/8/8)

* PCIE 3.0 n’est pris en charge qu’avec le processeur Intel ®

Ivy Bridge. Avec le processeur Intel ® Sandy Bridge, seul

PCIE 2.0 est pris en charge.

- 1 x slot PCI Express 2.0 x16 (PCIE4 : mode x4)

- 1 x slot PCI Express 2.0 x1

- Prend en charge AMD Quad CrossFireX TM , 4-Way

CrossFireX TM , 3-Way CrossFireX TM et CrossFireX TM

- Prend en charge NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way

SLI TM et SLI TM

les sorties VGA sont uniquement pris en charge par les

processeurs à GPU intégré.


- Supporte Intel ® HD Graphics Built-in Visuals: Intel ® Quick



- Pixel Shader 5.0, DirectX 11 avec CPU Intel ® Ivy Bridge,

Pixel Shader 4.1, DirectX 10.1 avec CPU Intel ® Sandy

Bridge

- Mémoire partagée max 1760MB

- Prend en charge le HDMI 1.4a avec une résolution

maximale jusqu’à 1920x1200 @ 60Hz

- Prend en charge Lip Sync, Deep Color (12bpc), xvYCC et

HBR (High Bit Rate Audio : Audio à haut débit binaire) avec

Audio

LAN

HDMI (Moniteur compatible HDMI requis)

- Prise en charge de la fonction HDCP avec port HDMI

- Supporter 1080p Blu-ray(BD)/ lecteur de HD-DVD avec

port HDMI

- 7,1 CH HD Audio avec protection de contenu


- Prise en charge de l’audio Premium Blu-ray


Stockage

- Broadcom BCM57781

- Support du Wake-On-LAN

- Prend en charge la norme Energy Effi cient Ethernet

(Ethernet à effi cacité énergétique) 802.3az

- Prend en charge le protocole double LAN avec fonction

pairage

- Supporte PXE

- 2 x connecteurs SATA3 6,0 Gb/s par Intel ® Z77, prennent en

charge les fonctions RAID (RAID 0, RAID 1, RAID 5,

RAID 10, Intel Rapid Storage et Intel Smart Response),

NCQ, AHCI et « Hot Plug » (Branche ment à chaud)

- 4 x connecteurs SATA3 6,0 Gb/s par ASMedia ASM1061,

prennent en charge les fonctions NCQ, AHCI et « Hot

Plug » (Branche ment à chaud) (le connecteur SATA3_A4

est partagé avec le port eSATA3)

- 4 x connecteurs SATA2 3,0 Gb/s par Intel ® Z77, prennent en

charge les fonctions RAID (RAID 0, RAID 1, RAID 5,

RAID 10, Intel Rapid Storage et Intel Smart Response),

NCQ, AHCI et « Hot Plug » (Branche ment à chaud)

Panneau arrière I/O Panel

- 1 x port clavier/souris PS/2

- 1 x port HDMI

69


70

BIOS

Connecteurs

USB 3.0

- 1 x Port de sortie optique SPDIF

- 2 x ports USB 2.0 par défaut

- 1 x Connecteur eSATA3

- 8 x ports USB 3.0 par défaut

- 2 x ports LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE

et LED VITESSE)

- 1 x port IEEE 1394

- 1 x interrupteur d’effacement du CMOS avec LED

- Prise HD Audio: Haut-parleur arrière / Central /Basses /

Entrée Ligne / Haut-parleur frontal / Microphone

- 4 x ports USB3.0 à l’arrière par Intel ® Z77, prennent en

charge USB 1.0/2.0/3.0 jusqu’à 5 Gb/s

- 4 x ports USB3.0 à l’arrière par Etron EJ188, prennent en

charge USB 1.0/2.0/3.0 jusqu’à 5 Gb/s

- 2 x barrette USB3.0 en façade (prend en charge 4 ports

USB 3.0) par Etron EJ188, prend en charge USB 1.0/2.0/3.0

jusqu’à 5 Gb/s

- 1 x En-tête du module infrarouge

- 1 x Barrette pour module à infrarouges grand public

- 1 x En-tête de port COM

- 1 x Connecteur HDMI_SPDIF

- 1 x connecteur IEEE 1394

- 1 x Connecteur de LED d’alimentation

- 2 x Connecteur pour ventilateur de CPU Ventilateur

(1 x br. 4, 1 x br. 3)

- 3 x Connecteur pour ventilateur de Châssis Ventilateur

(1 x br. 4, 2 x br. 3)

- 1 x Connecteur pour ventilateur de pouvoir Ventilateur (br. 3)

- br. 24 connecteur d’alimentation ATX

- br. 8 connecteur d’alimentation 12V ATX

- Connecteur d’alimentation SLI/XFIRE

- Connecteur audio panneau avant

- 3 x En-tête USB 2.0 (prendre en charge 6 ports USB 2.0

supplémentaires)

- 2 x En-tête USB 3.0 (prendre en charge 4 ports USB 3.0

supplémentaires)

- 1 x Dr. Debug (LED de débogage à 7 segments)

- 1 x interrupteur d’alimentation avec LED

- 1 x interrupteur de réinitialisation avec LED

- 1 x interrupteur d’effacement du CMOS avec LED

- 64Mb AMI UEFI Legal BIOS avec support GUI


- Support du “Plug and Play”

- Compatible pour événements de réveil ACPI 1.1

- Gestion jumperless

- Support SMBIOS 2.3.1

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Tension

Multi-ajustement

CD d’assistance - Pilotes, utilitaires, logiciel anti-virus (version d’évaluation),

CyberLink MediaEspresso 6.5 Trial, Suite multimédia

Surveillance

système

ASRock MAGIX - OEM

- Détection de la température de l’UC

- Mesure de température de la carte mère

- Tachéomètre ventilateur processeur/châssis/pouvoir

ventilateur

- Ventilateur silencieux pour unité centrale/châssis (permet le

réglage automatique de la vitesse du ventilateur pour

châssis, selon la température de l’unité centrale)

- Commande de ventilateur CPU/Châssis à plusieurs

vitesses

- Monitoring de la tension: +12V, +5V, +3.3V, Vcore

Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit

Certifi cations

/ XP / XP 64-bit

- FCC, CE, WHQL

- Prêt pour ErP/EuP (alimentation Prêt pour ErP/EuP requise)

* Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web:



71

1.3 Réglage des cavaliers

L’illustration explique le réglage des cavaliers. Quand un capuchon est placé sur les broches, le cavalier est « FERME ». Si aucun capuchon ne relie les broches,le cavalier est « OUVERT ». L’illustration montre un cavalier à 3 broches dont les broches 1 et 2 sont « FERMEES » quand le capuchon est placé sur ces 2 broches.

Effacer la CMOS

(CLRCMOS1)

(voir p.2 fi g. 22)

Paramètres par défaut

Effacer la

CMOS

Remarque : CLRCMOS1 vous permet d’effacer les données du CMOS. Pour effacer et réinitialiser les paramètres du système à la confi guration originale, veuillez éteindre l’ordinateur et débrancher le cordon d’alimentation de la prise de courant. Après 15 secondes, utilisez un couvercle de jumper pour court-circuiter les broches pin2 et pin3 de CLRCMOS1 pendant 5 secondes. Veuillez cependant ne pas effacer le CMOS immédiatement après avoir mis à jour le BIOS. Si vous avez besoin d’effacer le CMOS après avoir mis à jour le BIOS, vous devez allumer en premier le système, puis l’éteindre avant de continuer avec l’opération d’effacement du CMOS. Veuillez noter que le mot de passe, la date, l’heure, le profi l par défaut de l’utilisateur, 1394 GUID et l’adresse MAC seront effacés seulement si la batterie du CMOS est enlevée.

Le commutateur Effacer CMOS présente la même fonction que le cavalier Effacer CMOS.

72


1.4 En-têtes et Connecteurs sur Carte

Les en-têtes et connecteurs sur carte NE SONT PAS des cavaliers.

NE PAS placer les capuchons de cavalier sur ces en-têtes et connecteurs. Le fait de placer les capuchons de cavalier sur les en-têtes et connecteurs causera à la carte mère des dommages irréversibles!

Connecteurs Série ATA2

(SATA2_2_3: voir p.2 No. 15)

(SATA2_4_5: voir p.2 No. 16)

Ces quatre connecteurs Série

ATA2 (SATA2) prennent en charge les câbles SATA pour les périphériques de stockage internes. L’interface SATA2 actuelle permet des taux transferts de données pouvant aller jusqu’à 3,0 Gb/s.

Connecteurs Série ATA3

(SATA3_A1_A2: voir p.2 No. 12)

(SATA3_A3_A4: voir p.2 No. 13)

(SATA3_0_1: voir p.2 No. 14)

Ces six connecteurs Série

ATA3 (SATA3) prennent en charge les câbles SATA pour les périphériques de stockage internes. L’interface SATA3 actuelle permet des taux transferts de données pouvant aller jusqu’à 6,0 Gb/s. Si vous installez le disque dur sur le port eSATA3 sur le panneau

E/S arrière, le connecteur

SATA3_A4 interne ne

Câble de données

Série ATA (SATA)

(en option)

Toute cote du cable de data

SATA peut etre connecte au disque dur SATA / SATA2 /

SATA3 ou au connecteur SATA2

/ SATA3 sur la carte

mere.

73


Cordon d’alimentation

Série ATA (SATA)

(en option) connecter au connecteur d’alimentation du disque dur SATA c o n n e c t e r à l’unité d’alimentation

électrique

Veuillez connecter l’extrémité noire du cordon d’alimentation

SATA sur le connecteur d’alimentation sur chaque unité.

Connectez ensuite l’extrémité blanche du cordon d’alimentation SATA sur le connecteur d’alimentation de l’unité d’alimentation électrique.

En-tête USB 2.0

(USB2_3 br. 9)

(voir p.2 No. 25)

(USB4_5 br. 9)

(voir p.2 No. 26)

1

USB_PWR

P-3

P+3

P-2

USB_PWR

A côté des deux ports USB 2.0 par défaut sur le panneau E/S, il y a trois embases USB 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB 2.0.

(USB6_7 br. 9)

(voir p.2 No. 27)

74

En-tête USB 3.0

(USB3_9_10 br.19)

(voir p.2 No. 10)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(USB3_11_12 br.19)

(voir p.2 No. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

En plus des huit ports USB

3.0 par défaut sur le panneau

E/S, il y a deux barrette USB 3.0 sur la carte mère. Chaque embase USB 3.0 peut prendre en charge 2 ports USB 3.0.


En-tête du module infrarouge

(IR1 br. 5)

(voir p.2 No. 32)

IRTX

+5VSB

DUMMY

1

IRRX

GND

Cet en-tête supporte un module infrarouge optionnel de transfert et de réception sans fi l.

Barrette pour module à infrarouges grand public Cette barrette peut être utilisée

(CIR1 br.4) pour connecter des récepteur

(voir p.2 No. 28)

Connecteur audio panneau

(HD_AUDIO1 br. 9)

GND

MIC_RET

C’est une interface pour un câble avant audio en façade qui

(voir p.2 No. 35) permet le branchement et le contrôle commodes de

périphériques

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

OUT2_R

MIC2_R

MIC2_L

1. L’audio à haute défi nition (HDA) prend en charge la détection de fi che, mais le fi l

de panneau sur le châssis doit prendre en charge le HDA pour fonctionner

correctement. Veuillez suivre les instructions dans notre manuel et le manuel de

châssis afi n installer votre système.

2. Si vous utilisez le panneau audio AC’97, installez-le sur l’adaptateur audio

du panneau avant conformément à la procédure ci-dessous:

A. Connectez Mic_IN (MIC) à MIC2_L.

B. Connectez Audio_R (RIN) à OUT2_R et Audio_L (LIN) à OUT2_L.

C. Connectez Ground (GND) à Ground (GND).

D. MIC_RET et OUT_RET sont réservés au panneau audio HD. Vous

n’avez pas besoin de les connecter pour le panneau audio AC’97.

E. Pour activer le micro avant.

Pour les systèmes d’exploitation Windows ® XP / XP 64 bits :

Sélectionnez “Mixer”. Sélectionnez “Recorder” (Enregistreur). Puis

cliquez sur “FrontMic” (Micro avant).

Pour les systèmes d’exploitation Windows ® 7 / 7 64 bits / Vista TM /

Vista TM 64 bits :

Allez sur l’onglet “FrontMic” (Micro avant) sur le Panneau de contrôle

Realtek. Ajustez “Recording Volume” (Volume d’enregistrement).

En-tête du panneau système

(PANEL1 br. 9)

Cet en-tête permet d’utiliser plusieurs fonctions du panneau

(voir p.2 No. 20) frontal.

75


76

Connectez l’interrupteur d’alimentation, l’interrupteur de réinitialisation et l’indicateur d’état du système du châssis sur cette barrette en respectant l’affectation des broches décrite ci-dessous. Faites attention aux broches positives et négatives avant de connecter les câbles.

PWRBTN (Interrupteur d’alimentation):

Connectez ici le connecteur d’alimentation sur le panneau avant du châssis. Vous pouvez confi gurer la façon de mettre votre système hors tension avec l’interrupteur d’alimentation.

RESET (Interrupteur de réinitialisation):

Connectez ici le connecteur de réinitialisation sur le panneau avant du châssis. Appuyez sur l’interrupteur de réinitialisation pour redémarrer l’ordinateur s’il se bloque ou s’il n’arrive pas à redémarrer normalement.

PLED (DEL alimentation système):

Connectez ici l’indicateur d’état de l’alimentation sur le panneau avant du châssis. Ce voyant DEL est allumé lorsque le système est en marche.

Le voyant DEL clignote lorsque le système est en mode veille S1/S3. Le voyant DEL est éteint lorsque le système est en mode veille S4 ou lorsqu’il est éteint (S5).

HDLED (DEL activité du disque dur):

Connectez ici le voyant DEL d’activité du disque dur sur le panneau avant du châssis. Ce voyant DEL est allumé lorsque le disque dur est en train de lire ou d’écrire des données.

Le design du panneau avant peut varier en fonction du châssis. Un module de panneau avant consiste principalement en : interrupteur d’alimentation, interrupteur de réinitialisation, voyant DEL d’alimentation, voyant DEL d’activité du disque dur, haut-parleur, etc. Lorsque vous connectez le panneau avant de votre châssis sur cette barrette, vérifi ez bien à faire correspondre les fi ls et les broches.

En-tête du haut-parleur de châssis

Veuillez connecter le haut-parleur de châssis sur cet

(SPEAKER1 br. 4) en-tête.

(voir p.2 No. 21)

LED di accensione

(PLED1 br. 3)

(voir p.2 Nr. 19)

1

PLED-

PLED+

PLED+

Collegare il LED di accensione chassi per indicare lo stato di alimentazione del sistema. Il

LED è acceso quando il sistema

è in funzione. Il LED continua a lampeggiare in stato S1/S3. Il

LED è spento in stato S4 o S5

(spegnimento).


Connecteur pour châssis et ventilateur

(CHA_FAN1 br. 4)

(voir p.2 No. 30)

(CHA_FAN2 br. 3)

(voir p.2 No. 29)

(CHA_FAN3 br. 3)

(voir p.2 No. 44)

(PWR_FAN1 br. 3)

(voir p.2 No. 3)

Branchez les câbles du ventilateur aux connecteurs pour ventilateur et faites broche de terre. CHA_FAN1,

CHA_FAN2 et CHA_FAN3 prennent en charge la fonction contrôle du ventilateur.

Connecteur du ventilateur de l’UC

(CPU_FAN1 br. 4)

(voir p.2 No. 4)

4 3 2 1

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Veuillez connecter le câble de ventilateur d’UC sur ce connecteur et brancher le fi l noir sur la broche de terre.

Bien que cette carte mère offre un support de (Ventilateur silencieux ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à 3 broches au connecteur du ventilateur de CPU sur cette carte mère, veuillez le connecter aux broches 1-3.

Installation de ventilateur à 3 broches

Broches 1-3 connectées

(CPU_FAN2 br. 3)

(voir p.2 No. 5)

En-tête d’alimentation ATX

(ATXPWR1 br. 24)

12 24

Veuillez connecter l’unité d’alimentation ATX sur cet en-

(voir p.2 No. 8) tête.

1 13

Bien que cette carte mère fournisse un connecteur de courant ATX 24 broches, elle peut encore fonctionner si vous adopter une alimentation traditionnelle ATX 20 broches. Pour utiliser une alimentation ATX 20 broches, branchez à l’alimentation électrique ainsi qu’aux broches 1 et 13.

20-Installation de l’alimentation électrique ATX

12

1


24

13

77

Connecteur ATX 12V

(ATX12V1 br.8) électrique

(voir p.2 No. 1)

8 5

4 1

Veuillez connecter une unité

12V sur ce connecteur.

Bien que cette carte mère possède 8 broches connecteur d’alimentation

ATX 12V, il peut toujours travailler si vous adoptez une approche traditionnelle à 4 broches ATX 12V alimentation.

Pour utiliser l’alimentation des 4 broches ATX, branchez votre alimentation avec la broche 1 et broche

4-Installation d’alimentation à 4 broches ATX 12V

8 5

4 1

Connecteur d’alimentation SLI/XFIRE

(SLI/XFIRE_POWER1 br. 4)

Il n’est pas nécessaire d’utiliser ce connecteur, mais veuillez le

(voir p.2 No. 43)

SLI/XFIRE_POWER1 brancher avec un connecteur d’alimentation pour disques durs quand deux cartes graphiques sont branchées sur cette carte mère en même

temps.

Header de IEEE 1394

(FRONT_1394 br. 9)

(voir p.2 No. 31)

1

RXTPAM_0

GND

RXTPBM_0

+12V

GND

Sauf un port de default IEEE

1394 sur le panel I/O, il y a un header de IEEE1394

(FRONT_1394) sur cette carte

+12V

RXTPBP_0

GND

RXTPAP_0 mere. Le header de IEEE 1394 peut supporter un port de IEEE

1394.

En-tête de port COM

(COM1 br.9)

(voir p.2 No. 33)

Cette en-tête de port COM est utilisée pour prendre en charge un module de port COM.

78


Connecteur HDMI_SPDIF

(HDMI_SPDIF1 2-pin)

(voir p.2 No. 34)

1

GND

SPDIFOUT

Connecteur HDMI_SPDIF, fournissant une sortie audio

SPDIF vers la carte VGA HDMI, et permettant au système de se connecter au un téléviseur numérique HDMI /un projecteur

/ un périphérique LCD. Veuillez brancher le connecteur

HDMI_SPDIF de la carte VGA

HDMI sur ce connecteur.

1.5 Interrupteur rapides

Cette carte mère dispose de trois interrupteurs rapides : un interrupteur d’alimentation, un interrupteur de réinitialisation et un interrupteur d’effacement de CMOS, permettant aux utilisateurs de rapidement allumer/éteindre ou réinitialiser le système, ainsi que d’effacer les valeurs du CMOS.

Interrupteur d’alimentation

(PWRBTN)

(voir p.2 No. 18)

Interrupteur de réinitialisation

(RSTBTN)

(voir p.2 No. 17)

Interrupteur d’effacement de CMOS

(CLRCBTN)

(voir p.3 No. 17)

L’interrupteur d’alimentation est un interrupteur rapide, qui permet

à l’utilisateur d’allumer/éteindre rapidement le système.

L’interrupteur de réinitialisation est un interrupteur rapide, qui permet à l’utilisateur de réinitialiser rapidement le système.

L’interrupteur d’effacement de

CMOS est un interrupteur rapide qui permet à l’utilisateur d’effacer rapidement les valeurs du CMOS.


79

2. Informations sur le BIOS

La puce Flash Memory sur la carte mère stocke le Setup du BIOS. Lorsque vous démarrez l’ordinateur, veuillez presser <F2> ou <Del> pendant le POST (Power-On-

Self-Test) pour entrer dans le BIOS; sinon, le POST continue ses tests de routine. Si vous désirez entrer dans le BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant. L’utilitaire d’installation du BIOS est conçu pour être convivial. C’est un programme piloté par menu, qui vous permet de faire défi ler par ses divers sousmenus et de choisir parmi les choix prédéterminés. Pour des informations détaillées sur le BIOS, veuillez consulter le Guide de l’utilisateur (fi chier PDF) dans le CD technique.

3. Informations sur le CD de support

Cette carte mère supporte divers systèmes d’exploitation Microsoft ® Windows ® : 7

/ 7 64 bits / Vista TM / Vista TM 64 bits / XP / XP 64 bits. Le CD technique livré avec cette carte mère contient les pilotes et les utilitaires nécessaires pour améliorer les fonctions de la carte mère. Pour utiliser le CD technique, insérez-le dans le lecteur de CD-ROM. Le Menu principal s’affi che automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fi chier “ASSETUP.EXE” dans le dossier BIN et doublecliquez dessus pour affi cher les menus.

80


1. Introduzione

Grazie per aver scelto una scheda madre ASRock Z77 WS, una scheda madre affi dabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.

Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione. Informazioni più dettagliate sulla motherboard si possono trovare nel manuale per l’utente presente nel CD di supporto.

aggiornati, pertanto il contenuto di questo manuale può subire variazioni senza preavviso. Nel caso in cui questo manuale sia

modifi cato, la versione aggiornata sarà disponibile sul sito di ASRock senza altro avviso. Sul sito ASRock si possono anche trovare le più recenti schede VGA e gli elenchi di CPU supportate.

ASRock website http://www.asrock.com

Se si necessita dell’assistenza tecnica per questa scheda madre, visitare il nostro sito per informazioni specifi che sul modello che si sta usando.


1.1 Contenuto della confezione

Scheda madre ASRock Z77 WS

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

Guida di installazione rapida ASRock Z77 WS

CD di supporto ASRock Z77 WS

Sei cavi dati Serial ATA (SATA) (opzionali)

Un cavi di alimentazione HDD Serial ATA (SATA) (opzionali)

Un I/O Shield

Due scheda ASRock SLI_Bridge

Un scheda ASRock SLI_Bridge_3S

Un scheda Bridge ASRock 3-Way SLI

ASRock vi ricorda...

Per ottenere migliori prestazioni in Windows ® 7 / 7 64-bit / Vista TM / Vista TM

64-bit, si consiglia di impostare l'opzione BIOS in Storage Confi guration

(Confi gurazione di archiviazione) sulla modalità AHCI. Per l'impostazione

BIOS, fare riferimento a “User Manual” (Manuale dell'utente) nel CD di supporto per dettagli.

81


82

1.2 Specifi che

Piattaforma

Processore

- ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- Design Premium Gold Capacitor (condensatori a polimeri

conduttivi di altissima qualità 100% made in Japan)

- Supporta Intel ® Core TM i7 / i5 / i3 di 3a e 2a generazione in un

Chipset

Memoria

pacchetto LGA1155

- Design Digi Power

- Struttura di fase con alimentazione 8 + 4

- Supporto della tecnologia Intel ® Turbo Boost 2.0

- Supporta CPU unlocked serie K

- Intel ® Z77

- Supporta tecnologia Intel

Connect Technology

® Rapid Start Technology e Smart

- Supporto tecnologia Dual Channel Memory

- 4 x slots DDR3 DIMM

- Supporto DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)/

Slot di

espansione

1600/1333/1066 non-ECC, momoria senza buffer

- Capacità massima della memoria di sistema: 32GB

- Supporto di Intel ® XMP (Extreme Memory Profi le)1.3/1.2

- 5 x Alloggio PCI Express 3.0 x16 (PCIE2 : modalità x16 o

PCIE1/PCIE3/PCIE5/PCIE7 : modalità x16/0/16/0 o modalità

x8/8/8/8)

* PCIE 3.0 è supportato soltanto con la CPU Intel ® Ivy Bridge.

Con la CPU Intel ® Sandy Bridge, supporta solamente PCIE

2.0.

- 1 x Alloggio PCI Express 2.0 x16 (PCIE4 : modalità x4)

- 1 x Alloggio PCI Express 2.0 x1

- Supporto di AMD Quad CrossFireX TM , 4-Way CrossFireX TM ,

3-Way CrossFireX TM e CrossFireX TM

- Supporto di NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM e

SLI TM

VGA su scheda * Le uscite Intel ® HD Graphics Built-in Visuals e VGA possono

essere supportate solo con processori dotati di GPU

integrata.

- Supporta Intel ® HD Graphics Built-in Visuals: Intel ® Quick Sync

Video 2.0, Intel ® InTru TM 3D, Intel ® Clear Video HD Technology,

Intel ® Insider TM , Intel ® HD Graphics 2500/4000

- Pixel Shader 5.0, DirectX 11 con CPU Intel ® Ivy Bridge, Pixel

Shader 4.1, DirectX 10.1 con CPU Intel ® Sandy Bridge

- Memoria massima condivisa 1760MB


Storage

Audio

LAN

- Supporta HDMI 1.4a con risoluzione massima fi no a

1920x1200 @ 60Hz

- Supporto delle funzioni Auto Lip Sync, Deep Color (12bpc),

xvYCC e HBR (High Bit Rate Audio) con HDMI (è necessario

un monitor compatibile HDMI)

- Supporto della funzione HDCP con le porta HDMI

- Supporto 1080p Blu-ray (BD) / HD-DVD riproduzione con le

porta HDMI

- 7.1 CH HD Audio con protezioni contenuti


- Supporto audio Blu-ray Premium


- Broadcom BCM57781

- Supporta Wake-On-LAN

- Supporto di Energy Effi cient Ethernet 802.3az

- Supporto di Dual LAN con funzione Teaming

- Supporta PXE

- 2 x Connettori SATA3 6,0Gb/s Z77 Intel ® , supporto RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage e

tecnologia Intel Smart Response) e delle funzioni NCQ, AHCI

e “Hot Plug”

- 4 x Connettori SATA3 6,0Gb/s ASM1061 ASMedia, supporto

delle funzioni NCQ, AHCI e “Hot Plug” (il connettore

SATA3_A4 è condiviso con la porta eSATA3)

- 4 x Connettori SATA2 3,0Gb/s Z77 Intel ® , supporto RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage e

tecnologia Intel Smart Response) e delle funzioni NCQ, AHCI

e “Hot Plug”

posteriore I/O - 1 x porta PS/2 per tastiera/mouse

- 1 x Porta HDMI

- 1 x Porta ottica SPDIF Out

- 2 x porte USB 2.0 già integrate

- 1 x Connettore eSATA3

- 8 x porte USB 3.0 già integrate

- 2 x porte LAN RJ-45 con LED (LED azione/collegamento e

LED velocità)

- 1 x porte IEEE 1394

- 1 x interruttore di pulizia CMOS con LED

- Connettore HD Audio: cassa posteriore / cassa centrale /

bassi / ingresso linea / cassa frontale / microfono

83


84

BIOS

USB 3.0

Connettori

CD di

supporto

Monitoraggio

Hardware

- 4 x porte USB 3.0 posteriori amministrate dal controller

Intel ® Z77, supporto di USB 1.0/2.0/3.0 fi no a 5Gb/s

- 4 x porte USB 3.0 posteriori amministrate dal controller

Etron EJ188, supporto di USB 1.0/2.0/3.0 fi no a 5Gb/s

- 2 x header USB 3.0 frontale (supporta 4 porte USB 3.0)

amministrato dal controller Etron EJ188, supporto di

USB 1.0/2.0/3.0 fi no a 5Gb/s

- 1 x Collettore modulo infrarossi

- 1 x Connettore modulo infrarosso consumer

- 1 x collettore porta COM

- 1 x connettore HDMI_SPDIF

- 1 x collettore IEEE 1394

- 1 x LED di accensione

- 2 x Connettore CPU Alimentazione ventola

(1 x 4-pin, 1 x 3-pin)

- 3 x Connettore Chassis Alimentazione ventola

(1 x 4-pin, 2 x 3-pin)

- 1 x Connettore potenza Alimentazione ventola (3-pin)

- 24-pin collettore alimentazione ATX

- 8-pin connettore ATX 12V

- Collettore alimentazione SLI/XFIRE

- Connettore audio sul pannello frontale

- 3 x Collettore USB 2.0 (supporta 6 porte USB 2.0)

- 2 x Collettore USB 3.0 (supporta 4 porte USB 3.0)

- 1 x Dr. Debug (LED debug con 7 segmenti)

- 1 x interruttore di alimentazione con LED

- 1 x interruttore di reset con LED

- 1 x interruttore pulizia CMOS con LED

- 64Mb AMI UEFI Legal BIOS con interfaccia di supporto

- Supporta “Plug and Play”

- Compatibile con ACPI 1.1 wake up events

- Supporta jumperfree

- Supporta SMBIOS 2.3.1

- Regolazione multi-voltaggio CPU Core, IGPU, DRAM, 1.8V

PLL, VTT, VCCSA

- Driver, Utilità, Software AntiVirus (versione di prova),

CyberLink MediaEspresso 6.5 Trial, Suite multimediale

ASRock MAGIX - OEM

- Sensore per la temperatura del processore

- Sensore temperatura scheda madre

- Indicatore di velocità per la ventola del CPU/Chassis/potenza

Alimentazione


Compatibilità

SO

Certifi cazioni

- Ventola CPU/Chassis silenziosa (permette la regolazione

automatica della ventola dello chassis in base alla temperatura

della CPU)

- Ventola CPU/chassis con controllo di varie velocità

- Voltaggio: +12V, +5V, +3.3V, Vcore

- Microsoft ® Windows ® 7 / 7 64 bit / Vista TM / Vista TM 64 bit / XP /

XP 64 bit

- FCC, CE, WHQL

- Predisposto ErP/EuP (è necessaria l’alimentazione

predisposta per il sistema ErP/EuP)

* Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com


85

1.3 Setup dei Jumpers

L’illustrazione mostra come sono settati i jumper. Quando il ponticello è posizionato sui pin, il jumper è “CORTOCIRCUITATO”. Se sui pin non ci sono ponticelli, il jumper è “APERTO”.

L’illustrazione mostra un jumper a 3 pin in cui il pin1 e il pin2 sono “CORTOCIRCUITATI” quando il ponticello è posizionato su questi pin.

Jumper

Resettare la CMOS

Settaggio del Jumper

(CLRCMOS1)

(vedi p.2 Nr. 22)

Impostazione predefi nita

Azzeramento CMOS

Nota: CLRCMOS1 permette si azzerare i dati nella CMOS. Per cancellare e ripristinare i parametri del sistema sulla confi gurazione iniziale, spegnere il computer e scollegare il cavo d’alimentazione dalla presa di corrente. Attendere 15 secondi, poi usare un cappuccio jumper per cortocircuitare il pin 2 ed il pin 3 su

CLRCMOS1 per 5 secondi. Tuttavia, si consiglia di non cancellare la CMOS subito dopo avere aggiornato il BIOS. Se si deve azzerare la CMOS quando si

è completato l’aggiornamento del BIOS, è necessario per prima cosa avviare il sistema e poi spegnerlo prima di eseguire l’azzeramento della CMOS. Notare che password, data, ore, profi lo utente predefi nito, 1394 GUID e indirizzo

MAC saranno cancellati solo se è rimossa la batteria della CMOS.

L’interruttore Clear CMOS (Cancella CMOS) ha la stessa funzione del jumper Clear CMOS.

86


1.4 Collettori e Connettori su Scheda

I collettori ed i connettori su scheda NON sono dei jumper. NON installare cappucci per jumper su questi collettori e connettori. L’installazione di cappucci per jumper su questi collettori e connettori provocherà danni permanenti alla scheda madre!

Connettori Serial ATA2

(SATA2_2_3: vedi p.2 Nr. 15)

(SATA2_4_5: vedi p.2 Nr. 16)

Questi quattro connettori Serial

ATA2 (SATA2) supportano cavi dati SATA per dispositivi di

L’interfaccia SATA2 attuale permette velocità di

Gb/s.


(SATA3_A1_A2: vedi p.2 Nr. 12)

Questi sei connettori Serial

ATA3 (SATA3) supportano cavi

(SATA3_A3_A4: vedi p.2 Nr. 13) dati SATA per dispositivi di

(SATA3_0_1: vedi p.2 Nr. 14) interni.

L’interfaccia SATA3 attuale permette velocità di

Gb/s. Se si installa l’HD sulla porta eSATA3 con la connessione I/O sul retro, il

SATA3_A4 interno non

funziona.

Cavi dati Serial ATA (SATA)

(Opzionale)

Una o altra estremità del cavo di dati SATA può essere collegata al disco rigido SATA /

SATA2 / SATA3 o al connettore di SATA2 / SATA3 su questa

Cavo d’alimentazione

Serial ATA (SATA)

(Opzionale)

Connettere all’ailmentazione dei dischi SATA

Collegare l’estremità nera de cavo di alimentazione SATA al connettore di alimentazione del drive. Poi connettete l’estremità

Connettere al gruppo di alimentazione bianca del cavo di alimentazio ne SATA al connettore power

dell’alimentatore.

87


Collettore USB 2.0

(9-pin USB2_3)

USB_PWR

Oltre alle due porte USB 2.0

predefi nite nel pannello I/O, la

(vedi p.2 Nr. 25)

(9-pin USB4_5)

1

GND

P+2

P-2

USB_PWR scheda madre dispone di tre intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0.

(vedi p.2 Nr. 26)

(9-pin USB6_7)

(vedi p.2 Nr. 27)

88

Collettore USB 3.0

(19-pin USB3_9_10)

(vedi p.2 Nr. 10)

predefi nite nel pannello I/O, la

IntA_P4_SSRX-

IntA_P4_SSRX+

IntA_P5_SSRX+

GND scheda madre dispone di due

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

Oltre alle otto porte USB 3.0 intestazioni USB 3.0. Ciascuna intestazione USB 3.0 supporta due porte USB 3.0.

IntA_P4_D-

IntA_P4_D+

IntA_P5_D+

DUMMY

(19-pin USB3_11_12)

(vedi p.2 Nr. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

Collettore modulo infrarossi

(5-pin IR1)

IRTX

+5VSB

DUMMY

Questo collettore supporta moduli ad infrarossi optional per

(vedi p.2 Nr. 32) la trasmissione e la ricezione

1

senza

IRRX

GND

Connettore modulo infrarosso consumer

(4-pin CIR1)

(vedi p.2 Nr. 28)

Questo connettore può essere utilizzato per collegare ricevitore remoto.


Connettore audio sul pannello frontale

(9-pin HD_AUDIO1)

(vedi p.2 Nr. 35)

GND

PRESENCE#

MIC_RET

OUT_RET

È un’interfaccia per il cavo del pannello audio. Che consente connessione facile e controllo dei dispositivi audio.

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

1. La caratteristica HDA (High Defi nition Audio) supporta il rilevamento dei

connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA

(High Defi nition Audio) per far sì che questa operi in modo corretto. Attenersi alle

istruzioni del nostro manuale e del manuale del telaio per installare il sistema.

2. Se si utilizza un pannello audio AC’97, installarlo nell’intestazione audio del

pannello anteriore, come indicato di seguito:

A. Collegare Mic_IN (MIC) a MIC2_L.

B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) ad OUT2_L.

C. Collegare Ground (GND) a Ground (GND).

D. MIC_RET e OUT_RET sono solo per il pannello audio HD. Non è

necessario collegarli per il pannello audio AC’97.

E. Per attivare il microfono frontale.

Sistema operativo Windows ® XP / XP 64-bit:

Selezionare “Mixer”. Selezionare “Recorder” (Registratore). Poi, fare

clic su “FrontMic” (Microfono frontale).

Sistema operativo Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit:

Andare alla scheda “FrontMic” (Microfono frontale) del pannello di

controllo Realtek. Regolare la voce “Recording Volume” (Volume

registrazione).

Collettore pannello di sistema

(9-pin PANEL1)

Questo collettore accomoda diverse funzioni di sistema

(vedi p.2 Nr. 20) frontale.

Collegare l’interruttore d’alimentazione, l’interruttore di ripristino, l’indicatore di stato del sistema del pannello frontale del telaio a questo header in base all’assegnazione dei pin defi nita di seguito. Determinare i pin positivi e negativi prima di collegare i cavi.

PWRBTN (interruttore d’alimentazione):

Va collegato all’interruttore d’alimentazione del pannello frontale del telaio. Usando l’interruttore d’alimentazione si può confi gurare il modo in cui si spegne il sistema.

RESET (interruttore di ripristino):

Va collegato all’interruttore di ripristino del pannello frontale del telaio.

Premere l’interruttore di ripristino per riavviare il sistema se il computer si blocca e non riesce ad eseguire un normale riavvio.

89


90

PLED (LED alimentazione del sistema):

Va collegato all’indicatore di stato d’alimentazione del pannello frontale del telaio. Il LED è acceso quando il sistema è operativo. Il LED continua a lampeggiare quando il sistema è in stato di standby S1/S3. Il LED è spento quando il sistema è in stato di sospensione /ibernazione S4 oppure spento (S5).

HDLED (LED attività disco rigido):

Va collegato al LED attività disco rigido del pannello frontale del telaio. Il

LED è acceso quando disco rigido legge e scrive i dati.

Il design del pannello frontale può variare in base ai telai. Il modulo di un pannello frontale può consistere di: interruttore d’alimentazione, interruttore di ripristino, LED d’alimentazione, LED attività disco rigido, casse, eccetera. Quando si collega il modulo del pannello frontale a questo header, assicurarsi che l’assegnazione dei fi li e dei pin sia fatta

Collettore casse telaio Collegare le casse del telaio a

(4-pin SPEAKER1) collettore.

(vedi p.2 Nr. 21)

LED di accensione

(3-pin PLED1)

(vedi p.2 Nr. 19)

1

PLED-

PLED+

PLED+

Collegare il LED di accensione chassi per indicare lo stato di alimentazione del sistema. Il

LED è acceso quando il sistema

è in funzione. Il LED continua a lampeggiare in stato S1/S3. Il

LED è spento in stato S4 o S5

(spegnimento).

Collettori Chassis ed alimentazione ventola

(4-pin CHA_FAN1)

(vedi p.2 Nr. 30)

(3-pin CHA_FAN2)

(vedi p.2 Nr. 29)

(3-pin CHA_FAN3)

(vedi p.2 Nr. 44)

(3-pin PWR_FAN1)

(vedi p.2 Nr. 3)

Collegare i cavi della ventola ai facendo combaciare il cavo nero col pin di terra. e CHA_FAN3 supportano la funzione Fan Control.


Connettore ventolina CPU

(4-pin CPU_FAN1)

4 3 2 1

Collegare il cavo della ventolina

CPU a questo connettore e far

(vedi p.2 Nr. 4) il

Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4

piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare

anche senza la funzione di controllo della velocità della ventola. Se si intende

collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa

scheda madre, collegarla ai piedini 1-3.

Piedini 1-3 collegati

Installazione della ventola a 3 piedini

(3-pin CPU_FAN2)

(vedi p.2 Nr. 5)

Connettore alimentazione ATX

(24-pin ATXPWR1)

12 24

Collegare la sorgente d’alimentazione ATX a questo

(vedi p.2 Nr. 8) connettore.

1 13

Con questa scheda madre, c’è in dotazione un connettore elettrico ATX a 24 pin, ma può funzionare lo stesso se si adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13.

12

Installazione dell’alimentatore ATX a 20 pin

1

24

13

Connettore ATX 12 V

(8-pin ATX12V1)

(vedi p.2 Nr. 1)

8 5

4 1

Collegare un alimentatore ATX

12 V a questo connettore.

Sebbene questa schedamadre fornisca un connettore elettrico 8-pin ATX 12V, l‘unita‘ puo‘ ancora essere funzionante se viene utilizzata una fornitura elettrica tradizionale a 4-pin ATX 12V. Per usare tale fornitura elettrica 4-pin ATX 12V, prego collegare la presa elettrica al Pin 1 e Pin 5.

8 5

Installazione elettrica 4-Pin ATX 12V

4 1

91


Connettore alimentazione SLI/XFIRE

(4-pin SLI/XFIRE_POWER1)

(vedi p.2 Nr. 43)

SLI/XFIRE_POWER1

Non è necessario usare questo connettore, però deve essere collegatoad un connettore d’alimentazione disco rigido quando sulla scheda madre

Intestazione IEEE 1394

(9-pin FRONT_1394)

(vedi p.2 Nr. 31)

1

RXTPAM_0

GND

+12V

GND

Accanto alla porta di default

IEEE 1394 sul pannello I/O, e‘ presente un‘intestazione IEEE

1394 (FRONT_1394) sulla

+12V

RXTPBP_0

GND

RXTPAP_0 scheda madre. Questa intestazione IEEE 1394 puo‘ supportare una porta IEEE

1394.

Collettore porta COM

(9-pin COM1)

(vedi p.2 Nr. 33)

Questo collettore porta COM è utilizzato per supportare il modulo porta COM.

Header HDMI_SPDIF

(2-pin HDMI_SPDIF1)

(vedi p.2 Nr. 34)

1

GND

SPDIFOUT

Header HDMI_SPDIF, con uscita audio SPDIF su scheda

HDMI VGA, consente al sistema di collegare dispositivi per TV digitale HDMI/proiettori/

LCD . Collegare il connettore

HDMI_SPDIF della scheda

VGA HDMI a questo header.

92


1.5 Interruttori rapidi

Questa scheda madre ha tre interruttori rapidi: Interruttore di alimentazione, interruttore di reset e interruttore pulizia CMOS, che consentono agli utenti di accendere / spegnere rapidamente o cancellare i valori CMOS.

Interruttore

(PWRBTN)

(vedi p.2 Nr. 18)

Interruttore di reset

(RSTBTN)

(vedi p.2 Nr. 17)

Interruttore pulizia CMOS

(CLRCBTN)

(vedi p.3 Nr. 17)

L’interruttore di alimentazione è un interruttore rapido che consente agli utenti di accendere/spegnere rapidamente il sistema.

L’interruttore di reset è un interruttore rapido che consente agli utenti di resettare rapidamente il sistema.

L’interruttore di pulizia CMOS è un interruttore rapido che consente agli utenti di cancellare velocemente i valori CMOS.


93

2. Informazioni sul BIOS

La Flash Memory sulla scheda madre contiene le Setup Utility. Quando si avvia il computer, premi <F2> o <Del> durante il Power-On-Self-Test (POST) della Setup utility del BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il

BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF fi le) contenuto nel cd di supporto.

3. Software di supporto e informazioni su

CD

Questa scheda madre supporta vari sistemi operativi Microsoft ® Windows ® : 7 /

7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. Il CD di supporto a corredo della scheda madre contiene i driver e utilità necessari a potenziare le caratteristiche della scheda.

Inserire il CD di supporto nel lettore CD-ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul fi le “ASSETUP.EXE” nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù.

94


1. Introducción

Gracias por su compra de ASRock Z77 WS placa madre, una placa de confi anza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.

Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.

Porque las especifi caciones de la placa madre y el software de BIOS podrían ser actualizados, el contenido de este manual puede ser cambiado sin aviso. En caso de cualquier modifi cación de este manual, la versión actualizada estará disponible en el website de ASRock sin previo aviso.

También encontrará las listas de las últimas tarjetas VGA y CPU soportadas en la página web de ASRock.

Website de ASRock http://www.asrock.com

Si necesita asistencia técnica en relación con esta placa base, visite nuestra página web con el número de modelo específi co de su placa.


1.1 Contenido de la caja

Placa base ASRock Z77 WS

(Factor forma ATX: 30,5 cm x 24,4 cm, 12,0” x 9,6”)

Guía de instalación rápida de ASRock Z77 WS

CD de soporte de ASRock Z77 WS

Seis cables de datos Serial ATA (SATA) (Opcional)

Una cables de alimentación HDD Serial ATA (SATA) (Opcional)

Una protección I/O

Dos tarjeta ASRock SLI_Bridge

Una tarjeta ASRock SLI_Bridge_3S

Una tarjeta SLI Bridge de 3 direcciones de ASRock

ASRock le recuerda...

Para mejorar el rendimiento en Windows ® 7 / 7 64 bits / Vista TM / Vista TM

64 bits, es recomendable establecer la opción del BIOS de la confi guración de almacenamiento en el modo AHCI. Para obtener detalles sobre la confi guración del BIOS, consulte el “Manual del usuario” que se encuentra en nuestro CD de soporte.

95


96

Plataforma

Procesador

Memoria

Ranuras de

Expansión

VGA OnBoard

1.2 Especifi cación

- Factor forma ATX: 30,5 cm x 24,4 cm, 12,0” x 9,6”

- Diseño de condensadores de oro de calidad superior

(condensadores de polímero conductor de alta calidad de

fabricación 100% japonesa)

- Admite procesadores Intel ® Core TM i7 / i5 / i3 de la 3ª y 2ª

generación en el paquete LGA1155

- Diseño de alimentación digital

- Diseño de fases de potencia 8 + 4

- Admite la tecnología Intel ® Turbo Boost 2.0 Technology

- Admite procesador desbloqueado de la serie K

- Admite las tecnologías Intel ® Rapid Start y Smart Connect

- Soporte de Tecnología de Memoria de Doble Canal

- 4 x DDR3 DIMM slots

- Apoya DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)/

1600/1333/1066 non-ECC, memoria de un-buffered

- Máxima capacidad de la memoria del sistema: 32GB

- Compatible con Intel ® Extreme Memory Profi le (XMP)1.3/1.2

- 5 x ranuras PCI Express 3.0 x16 (PCIE2: modo x16 o PCIE1/

PCIE3/PCIE5/PCIE7: modo x16/0/16/0 o modo x8/8/8/8)

* PCIE 3.0 solamente se admite con una CPU Intel ® Ivy

Bridge. Con una CPU Intel ® Sandy Bridge, solamente

admite PCIE 2.0.

- 1 x ranura PCI Express 2.0 x16 (PCIE4: modo x4)

- 1 x ranura PCI Express 2.0 x1

- Compatible con AMD Quad CrossFireX TM , 4-Way

CrossFireX TM , 3-Way CrossFireX TM y CrossFireX TM

- Compatible con NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way

SLI TM y SLI TM

* Los efectos visuales incorporados con gráfi cos de alta

defi nición Intel ® y las salidas VGA sólo se soportan con

procesadores con GPU integrada.

HD Graphics Built-in Visuals: Intel ® Quick Sync

Video 2.0, Intel ® InTru TM 3D, Intel ® Clear Video HD


- Pixel Shader 5.0, DirectX 11 con CPU Intel ® Ivy Bridge, Pixel

Shader 4.1, DirectX 10.1 con CPU Intel ® Sandy Bridge

- 1760MB de Memoria máxima compartida


- Admite HDMI 1.4a con una resolución máxima de 1920x1200

a 60 Hz

- Admite Sincronización automática entre audio y vídeo, Deep

Color (12 bpc), xvYCC y HBR (audio de alta tasa de bits) con

HDMI (se necesita un monitor compatible con HDMI)

- Admite la función HDCP con puerto HDMI

- Apoya la reproducción de Blu-rayo de 1080p (BD) / HD-DVD

con puerto HDMI

Audio

LAN

- 7.1 CH HD Audio con Protección de Contenido


- Compatible con audio Blu-ray de alta calidad


- Broadcom BCM57781

- Soporta Wake-On-LAN

- Compatible con Ethernet 802.3az de bajo consumo

energético

- Admite LAN dual con la función de trabajo en equipo

- Compatible con PXE

Almacenamiento - 2 x conectores SATA3 de 6,0 Gb/s con chip Intel ® Z77 con

funciones RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage y tecnología Intel Smart Response), NCQ,

AHCI y de “Hot Plug” (conexión en caliente)

- 4 x conectores SATA3 de 6,0 Gb/s con chip ASMedia

ASM1061 con funciones NCQ, AHCI y de “Hot Plug” (conexión

en caliente) (los puertos SATA3_A4 y eSATA3 son

compartidos)

- 4 x conectores SATA2 de 3,0 Gb/s con chip Intel ® Z77 con

funciones RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage y tecnología Intel Smart Response), NCQ,

AHCI y de “Hot Plug” (conexión en caliente)

Entrada/Salida de I/O Panel

Panel Trasero - 1 x puerto de teclado/ratón PS/2

- 1 x puerto HDMI

- 1 x puerto de salida óptica SPDIF

- 2 x puertos USB 2.0 predeterminados

- 1 x Conector eSATA3

- 8 x puertos USB 3.0 predeterminados

- 2 x puertos LAN RJ-45 con LED (LED de ACCIÓN/ENLACE

y LED de VELOCIDAD)

- 1 x puerto IEEE 1394

- 1 x conmutador de borrado de memoria CMOS con

indicador LED

97


98

BIOS

USB 3.0

Conectores

CD de soport

- Conexión de audio: Altavoz trasero / Central / Bajos /

Entrada de línea / Altavoz frontal / Micrófono

- 4 x puertos USB 3.0 traseros de Intel ® Z77, compatible con

USB 1.0/2.0/3.0 de hasta 5 GB/s

- 4 x puertos USB 3.0 traseros de Etron EJ188 compatible con

USB 1.0/2.0/3.0 de hasta 5 GB/s

- 2 x cabecera USB 3.0 delantera (compatible con 4 puertos

USB 3.0) de Etron EJ188, compatible con USB 1.0/2.0/3.0

de hasta 5 GB/s

- 1 x Cabezal de Módulo Infrarrojos

- 1 x Base de conexiones del módulo de infrarrojos para el

consumidor

- 1x En-tête de port COM

- 1 x cabecera HDMI_SPDIF

- 1 x cabecera IEEE 1394

- 1 x cabecera de indicador LED de encendido

- 2 x Conector de ventilador de CPU (1 x 4-pin, 1 x 3-pin)

- 3 x Conector de ventilador de chasis (1 x 4-pin, 2 x 3-pin)

- 1 x Conector de ventilador de alimentación (3-pin)

- 24-pin cabezal de alimentación ATX

- 8-pin conector de ATX 12V power

- Cabezal de alimentación SLI/XFIRE

- Conector de audio de panel frontal

- 3 x Cabezal USB 2.0 (admite 6 puertos USB 2.0 adicionales)

- 2 x Cabezal USB 3.0 (admite 4 puertos USB 3.0 adicionales)

- 1 x Dr. Debug (indicador LED de avería de 7 segmentos)

- 1 x conmutador de encendido con indicador LED

- 1 x conmutador de reinicio con indicador LED

- 1 x conmutador de borrado de memoria CMOS con

indicador LED

- 64Mb AMI BIOS legal UEFI AMI compatible con GUI

- Soporta “Plug and Play”

- ACPI 1.1 compliance wake up events

- Soporta “jumper free”

- Soporta SMBIOS 2.3.1

- Múltiple ajuste de CPU Core, IGPU, DRAM, 1.8V PLL, VTT,

VCCSA Voltage

- Controladores, utilidades, software de antivirus (versión de

prueba), Prueba de CyberLink MediaEspresso 6.5, Conjunto

multimedia ASRock MAGIX - OEM


Monitor

Hardware

OS

- Sensibilidad a la temperatura del procesador

- Sensibilidad a la temperatura de la placa madre

- Taquímetros de los ventiladores del procesador y del CPU /

chasis / alimentación

- Ventilador silencioso del procesador y el chasis (ajuste

automático de la velocidad del ventilador del chasis en

función de la temperatura del procesador)

- Control de ajuste de la velocidad del ventilador de la CPU /

chasis

- Monitor de Voltaje: +12V, +5V, +3.3V, Vcore

- En conformidad con Microsoft ® Windows ® 7 / 7 64 bits /

Vista TM / Vista TM 64 bits / XP / XP 64 bits

Certifi caciones - FCC, CE, WHQL

- Cumple con la directiva ErP/EuP (se requiere una fuente de

alimentación que cumpla con la directiva ErP/EuP)

* Para más información sobre los productos, por favor visite nuestro sitio web:



99

1.3 Setup de Jumpers

La ilustración muestra como los jumpers son confi gurados. Cuando haya un jumpercap sobre los pins, se dice gue el jumper está “Short”. No habiendo jumper cap sobre los pins, el jumper está “Open”. La ilustración muesta un jumper de 3 pins cuyo pin 1 y pin 2 están “Short”.

Limpiar CMOS

(CLRCMOS1, jumper de 3 pins)

(ver p.2, N. 22)

Valor predeterminado

Restablecimiento de la CMOS

Nota: CLRCMOS1 permite borrar los datos de la memoria CMOS. Para borrar los parámetros del sistema y restablecer la confi guración predeterminada de los mismos, apague el equipo y desenchufe el cable de alimentación de la toma de corriente eléctrica. Deje que transcurran 15 segundos y, después, utilice un puente para cortocircuitar los contactos 2 y 3 de CLRCMOS1 durante 5 segundos. No borre la memoria CMOS justamente después de actualizar el BIOS. Si necesita borrar la memoria CMOS justamente después de actualizar el BIOS, debe iniciar primero el sistema y, a continuación, cerrarlo antes de llevar a cabo el borrado de dicha memoria. Tenga en cuenta que la contraseña, la fecha, la hora, el perfi l predeterminado del usuario, el GUID 1394 y la dirección MAC solamente se borrará si la batería CMOS se quita.

El conmutador Borrar CMOS tiene la misma función que el puente

Borrar CMOS.

100


1.4 Cabezales y Conectores en Placas

Los conectores y cabezales en placa NO son puentes. NO coloque las cubiertas de los puentes sobre estos cabezales y conectores. El colocar cubiertas de puentes sobre los conectores y cabezales provocará un daño permanente en la placa base.

Conexiones de serie ATA2

(SATA2_2_3: vea p.2, N. 15)

(SATA2_4_5: vea p.2, N. 16)

Estas cuatro conexiones de serie ATA2 (SATA2) admiten cables SATA para dispositivos de almacenamiento internos. La interfaz SATA2 actual permite una velocidad de transferencia de 3.0 Gb/s.

Conexiones de serie ATA3

(SATA3_A1_A2: vea p.2, N. 12)

(SATA3_A3_A4: vea p.2, N. 13)

(SATA3_0_1: vea p.2, N. 14)

Estas seis conexiones de serie ATA3 (SATA3) admiten cables SATA para dispositivos de almacenamiento internos. La interfaz SATA2 / SATA3 actual permite una velocidad de transferencia de 6.0 Gb/s. Si instala la unidad de disco duro en el puerto eSATA3 situado en la E/S posterior, el conector

SATA3_A4 interno no funciona

rá.

Cable de datos de serie ATA (SATA)

(Opcional)

Cualquier extremo del cable de los datos de SATA puede ser conectado con el disco duro de

SATA / SATA2 / SATA3 o el conectador de SATA2 / SATA3 en esta placa base.

Cable de alimentación de serie ATA (SATA)

(Opcional)

Connettere all’ailmentazione dei dischi SATA

Connettere al gruppo di alimentazione

Conecte el extremo negro del cable de SATA al conector de energía de la unidad. A continuación, conecte el extremo blanco del cable de alimentación SATA a la conexión de alimentación de la fuente de alimentación.

101


Cabezal USB 2.0

(9-pin USB2_3)

(vea p.2, N. 25)

(9-pin USB4_5)

(vea p.2, N. 26)

USB_PWR

P-3

P+3

GND

DUMMY

1

GND

P+2

P-2

USB_PWR

Además de dos puertos USB

2.0 predeterminados en el panel de E/S, hay tres bases de conexiones USB 2.0 en esta placa base. Cada una de estas bases de conexiones admite dos puertos USB 2.0.

(9-pin USB6_7)

(vea p.2, N. 27)

Cabezal USB 3.0

(19-pin USB3_9_10)

(vea p.2, N. 10)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(19-pin USB3_11_12)

(vea p.2, N. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

Además de ocho puertos USB

3.0 predeterminados situados en el panel E/S, hay dos bases de conexiones USB 3.0 en esta placa base. Cada una de estas bases de conexiones admite dos puertos USB 3.0.

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

102

Cabezal de Módulo Infrarrojos

(5-pin IR1)

(vea p.2, N. 32)

Base de conexiones del módulo de infrarrojos para el consumidor

(4-pin CIR1)

(vea p.2, N. 28)

IRTX

+5VSB

DUMMY

1

IRRX

GND

Este cabezal soporta un módulo infrarrojos de transmisión y recepción wireless opcional.

Esta base de conexiones se puede utilizar para conectar receptor remoto.


Conector de audio de panel frontal

GND

PRESENCE#

MIC_RET

OUT_RET

Este es una interface para cable de audio de panel frontal

(9-pin HD_AUDIO1) que permite conexión y control

(vea p.2, N. 35) 1 conveniente de apparatos de

Audio.

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

1. El Audio de Alta Defi nición soporta la detección de conector, pero el

cable de panel en el chasis debe soportar HDA para operar

correctamente. Por favor, siga las instrucciones en nuestro manual y

en el manual de chasis para instalar su sistema.

2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido

del panel frontal de la siguiente manera:

A. Conecte Mic_IN (MIC) a MIC2_L.

B. Conecte Audio_R (RIN) a OUT2_R y Audio_L (LIN) en OUT2_L.

C. Conecte Ground (GND) a Ground (GND).

D. MIC_RET y OUT_RET son sólo para el panel de sonido HD. No

necesitará conectarlos al panel de sonido AC’97.

E. Activación del micrófono frontal.

En sistemas operativos Windows ® XP / XP 64-bit:

Seleccione “Mixer” (Mezclador). Seleccione “Recorder” (Grabadora).

A continuación, haga clic en “FrontMic” (Micrófono frontal).

En sistemas operativos Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit:

Acceda a la fi cha “FrontMic” (Micrófono frontal) del panel de control

Realtek. Ajuste la posición del control deslizante “Recording Volume”

(Volumen de grabación).

Cabezal de panel de sistema

(9-pin PANEL1)

Este cabezar acomoda varias dunciones de panel frontal de

(vea p.2, N. 20) sistema.

Conecte el interruptor de alimentación, el interruptor de restablecimiento y el indicador de estado del sistema situados en el chasis con esta cabecera en función de las siguientes asignaciones de contacto. Preste atención a los contactos positivos y negativos antes de conectar los

cables.

PWRBTN (interruptor de alimentación):

Conecte el interruptor de encendido situado en el panel frontal del chasis. Puede confi gurar la forma de apagar su sistema mediante el interruptor de alimentación.

RESTABLECER (interruptor de restablecimiento):

Conecte el interruptor de restablecimiento situado en el panel frontal del

103


chasis. Pulse el interruptor de restablecimiento para restablecer el equipo si se bloquea y no se reinicia con normalidad.

PLED (LED de alimentación del sistema):

Conecte el indicador de estado de alimentación situado en el panel frontal del chasis. El LED se enciende cuando el sistema esté en funcionamiento. El LED parpadea cuando el sistema se encuentre en estado de suspensión S1/S3. El LED se apaga cuando el sistema se encuentre en estado de suspensión S4 o se apaga (S5).

HDLED (LED de actividad del disco duro):

Conecte el LED de actividad de disco duro situado en el panel frontal del chasis. El LED se enciende cuando el disco duro esté leyendo o

Es posible que el diseño del panel frontal varíe en función del chasis. Un módulo del panel frontal consiste principalmente de interruptor de alimentación, interruptor de restablecimiento, LED de alimentación, LED de actividad del disco duro, altavoz, etc. Al conectar el módulo del panel frontal del chasis a esta cabecera, asegúrese de que las asignaciones de cables y las asignaciones de contactos coincidan correctamente.

Cabezal del altavoz del chasis Conecte el altavoz del chasis a

(4-pin SPEAKER1) cabezal.

(vea p.2, N. 21)

Cabecera de indicador

LED de encendido

(3-pin PLED1)

(vea p.2, N. 19)

1

PLED-

PLED+

PLED+

Conecte el indicador LED de encendido del chasis a esta cabecera para conocer el estado de encendido del sistema. El indicador LED se encenderá si el sistema se encuentra en funcionamiento.

El indicador LED parpadeará en el estado S1/S3. El indicador

LED se apagará en los estados

S4 o S5 (apagado).

104

Conectores de ventilador de chasis / alimentación

(4-pin CHA_FAN1)

(vea p.2, N. 30)

(3-pin CHA_FAN2)

(vea p.2, N. 29)

Por favor, conecte los cables del ventilador a los conectores de ventilador, haciendo coincidir el cable negro con la patilla de masa. CHA_FAN1, CHA_FAN2 y CHA_FAN3 admiten control


(3-pin CHA_FAN3)

(vea p.2, N. 44)

(3-pin PWR_FAN1)

(vea p.2, N. 3)

Conector del ventilador de la CPU

(4-pin CPU_FAN1)

(vea p.2, N. 4)

4 3 2 1

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Conecte el cable del ventilador de la CPU a este conector y haga coincidir el cable negro con el conector de tierra.

Aunque esta placa base proporciona compatibilidad para un ventilador (silencioso)

de procesador de 4 contactos, el ventilador de procesador de 3 contactos seguirá

funcionando correctamente incluso sin la función de control de velocidad de

ventilador. Si pretende enchufar el ventilador de procesador de 3 contactos en el

conector del ventilador de procesador de esta placa base, conéctelo al contacto

1-3.

Contacto 1-3 conectado

Instalación del ventilador de 3 contactos

(3-pin CPU_FAN2)

(vea p.2, N. 5)

Cabezal de alimentación ATX

(24-pin ATXPWR1)

(vea p.2, N. 8)

12 24

Conecte la fuente de alimentación ATX a su cabezal.

1 13

A pesar de que esta placa base incluye in conector de alimentación ATX de 24 pins, ésta puede funcionar incluso si utiliza una fuente de alimentación ATX de

20 pins tradicional. Para usar una fuente de alimentación ATX de 20 pins, por favor, conecte su fuente de alimentación usando los Pins 1 y 13.

12

Instalación de una Fuente de Alimentación ATX de 20 Pins 1

Cabezal de alimentación ATX 12V

(8-pin ATX12V1)

(vea p.2, N. 1)

8 5

4 1

Conecte la fuente de alimentación ATX 12V a su cabezal.

24

13

105


Aunque esta placa base proporciona un conector de energía de 8-pin ATX 12V, puede todavía trabajar si usted adopta un fuente tradicional de energía de 4-pin

ATX 12V. Para usar el fuente de energía de 4-pin ATX 12V, por favor conecte su fuente de energía junto con Pin 1 y Pin 5.

8 5

Instalación de Fuente de Energía de 4-Pin ATX 12V

4 1

Conector de alimentaciónSLI/XFIRE

(4-pin SLI/XFIRE_POWER1)

No es necesario utilizar este conector. Conéctelo al conector

(vea p.2, N. 43) de alimentación del disco duro

cuando gráfi cas a esta placa base al

Jefe de IEEE 1394

(9-pin FRONT_1394)

(ver p.2, N. 31)

Cabezal del puerto COM

(9-pin COM1)

(vea p.2, N. 33)

RXTPAM_0

GND

RXTPBM_0

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

Además de un puerto de IEEE

1394 del defecto en el panel de

I/O, hay un jefe de IEEE 1394

(FRONT_1394) en esta placa base. Este jefe de IEEE 1394 puede apoyar un puerto de

Este cabezal del puerto COM se utiliza para admitir un módulo de puerto COM.

106

Cabecera HDMI_SPDIF

(HDMI_SPDIF1 de 2 pin)

(vea p.2, N. 34)

1

GND

SPDIFOUT

Cabecera HDMI_SPDIF. Ofrece una salida SPDIF la tarjeta

VGA HDMI, permite al sistema conectarse a dispositivos de

TV Digital HDMI / proyectores /

Dispositivos LCD. Conecte el conector HDMI_SPDIF de la tarjeta VGA HDMI a esta

cabecera.


1.5 Conmutadores rápidos

Esta placa base dispone de tres conmutadores rápidos: conmutador de encendido, conmutador de reinicio y conmutador de borrado de memoria CMOS. Dichos conmutadores permiten al usuario encender / apagar o reiniciar el sistema, o bien borrar el contenido de la memoria CMOS.

Conmutador de encendido

(PWRBTN)

(vea p.2, N. 18)

Conmutador de reinicio

(RSTBTN)

(vea p.2, N. 17)

Conmutador de borrado de memoria CMOS

(CLRCBTN)

(vea p.3, N. 17)

El conmutador de reinicio es un conmutador rápido que permite al usuario reiniciar rápidamente el sistema.

El conmutador de borrado de memoria CMOS es un conmutador rápido que permite al usuario borrar rápidamente el contenido de la memoria CMOS.

El conmutador de encendido es un conmutador rápido que permite al usuario encender / apagar rápidamente el sistema.


107

2. BIOS Información

El Flash Memory de la placa madre deposita SETUP Utility. Durante el Power-Up

(POST) apriete <F2> o <Del> para entrar en la BIOS. Sí usted no oprime ninguna tecla, el POST continúa con sus rutinas de prueba. Si usted desea entrar en la

BIOS después del POST, por favor reinicie el sistema apretando <Ctl> + <Alt> +

<Borrar>, o apretando el botón Reset en el panel del ordenador. Para información detallada sobre como confi gurar la BIOS, por favor refi érase al Manual del Usuario

(archivo PDF) contenido en el CD.

3. Información de Software Support CD

Esta placa-base soporta diversos tipos de sistema operativo Windows ® : 7 / 7 64 bits / Vista TM / Vista TM 64 bits / XP / XP 64 bits. El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y confi gurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.

Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación.

108


1. Введение

Благодарим вас за покупку материнской платы ASRock Z77 WS надежной материнской платы, изготовленной в соответствии с постоянно предъявляемыми ASRock жесткими требованиями к качеству. Она обеспечивает превосходную производительность и отличается отличной конструкцией, которые отражают приверженность ASRock качеству и долговечности.

Данное руководство по быстрой установке включает вводную информацию о материнской плате и пошаговые инструкции по ее установке. Более подробные сведения о плате можно найти в руководстве пользователя на компакт-диске поддержки.

Спецификации материнской платы и программное обеспечение может обновляться без уведомления. В случае любых модификаций руководства его новая версия будет размещена на веб-сайте ASRock без специального уведомления. Кроме того, самые свежие списки поддерживаемых модулей памяти и процессоров можно найти на сайте ASRock.

Адрес веб-сайта ASRock http://www.asrock.com

При необходимости технической поддержки по вопросам данной материнской платы посетите наш веб-сайт для получения информации об используемой модели.


1.1 Комплектность

Материнская плата ASRock Z77 WS

(форм-фактор ATX: 12,0 x 9,6 дюйма / 30,5 x 24,4 см)

Руководство по быстрой установке ASRock Z77 WS

Компакт-диск поддержки ASRock Z77 WS

6 x кабель данных Serial ATA (SATA) (дополнительно)

1 x кабель питания для жесткого диска Serial ATA (SATA) (дополнительно)

1 x I/O Щит Группы ввода / вывода

2 x карта ASRock SLI_Bridge

1 x карта ASRock SLI_Bridge_3S

1 x Карта ASRock 3-Way SLI Bridge

ASRock напоминает...

Для обеспечения максимальной производительности ОС Windows ®

7 / 7 64-bit / Vista TM / Vista TM 64-bit рекомендуется в BIOS выбрать для параметра Storage Configuration (Конфигурация запоминающего устройства) режим AHCI. Подробные сведения о настройке BIOS см. в руководстве пользователя на прилагаемом компакт-диске.

109


1.2 Спецификации

110

@ 60 Гц

xvYCC и HBR (High Bit Rate Audio) через HDMI (необходим монитор с разъемом HDMI)


Аудиосистема

ЛВС воспроизведение HD-DVD через разъемы HDMI

- 7.1 CH HD Аудио HD с Довольной Защитой

(Кодер-декодер Аудио Realtek ALC898)

- PCIE x 1 Gigabit LAN 10/100/1000 Mb/s

- Broadcom BCM57781

накопителей - 2 x порта SATA3 со скоростью передачи данных 6,0 Гбит/с от контроллера Intel ® Z77, с аппаратной поддержкой функций RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage и технологии

Intel Smart Response), NCQ, AHCI и «горячего подключения»

- 4 x порта SATA3 со скоростью передачи данных 6,0 Гбит/с от контроллера ASMedia ASM1061, с аппаратной поддержкой функций

NCQ, AHCI и «горячего подключения»

(порт SATA3_A4 объединен с портом eSATA3)

- 4 x порта SATA2 со скоростью передачи данных 3,0 Гбит/с от контроллера Intel ® Z77, с аппаратной поддержкой функций RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage и технологии

Intel Smart Response), NCQ, AHCI и «горячего подключения»

вывода на задней - 1 x порт клавиатуры/мыши PS/2

панели - 1 x HDMI порт

- 1 x порт Optical SPDIF Out

- 2 x порта USB 2.0 на задней панели в стандартной конфигурации

- 1 x eSATA3 порт

- 8 x порта USB 3.0 на задней панели в стандартной конфигурации

- 2 x Разъем RJ-45 LAN с светодиодным индикатором (индикатор

ACT/LINK и индикатор SPEED)

- 1 x порт IEEE 1394

- 1 x кнопка Clear CMOS со светодиодом

USB 3.0

/ субвуфер / линейный вход / передняя колонка / микрофон

- 4 x задних порта USB 3.0 на контроллере Intel ® Z77 с поддержкой интерфейсов USB 1.0/2.0/3.0 и скорости передачи данных до

5 Гбит/с

- 4 x задних порта USB 3.0 на контроллере Etron EJ188 с поддержкой интерфейсов USB 1.0/2.0/3.0 и скорости передачи данных до 5 Гбит/с

- 2 x передний разъем USB 3.0 (поддерживает 4 порта USB 3.0) на

контроллере Etron EJ188 с поддержкой интерфейсов USB 1.0/2.0/3.0 и скорости передачи данных до 5 Гбит/с

111


Колодки и

плате

- 1 x Колодка инфракрасного модуля

- 1 x Датчик пользовательского инфракрасного модуля

- Разъем питания SLI/XFIRE

- Аудиоразъем передней панели

дополнительных портов USB 2.0

дополнительных портов USB 3.0)

- 1 x Dr. Debug (7-сегментный ЖК-дисплей)

BIOS - 64Mb AMI UEFI Legal BIOS с поддержкой rpaфичеckoro интеpфeйca

поль зователя

- поддержка “Plug and Play”

- поддержка режима настройки без перемычек

- поддержка SMBIOS 2.3.1

- Регулировка напряжений CPU Core, IGPU, DRAM, 1.8V PLL, VTT,

VCCSA

Контроль

CyberLink MediaEspresso 6.5, ASRock MAGIX Multimedia Suite -

поставщик

- Датчики температуры процессора

ные системы

- Тахометры вентиляторов CPU/Chassis/Power FAN

- Бесшумный вентилятор ЦП/системного блока (возможность авто

матической настройки скорости вентилятора системного блока в

соответствии с температурой центрального процессора)

- Мультиконтроль скорости вентилятора ЦП/Шасси

- Контроль напряжения: +12V, +5V, +3.3V, Vcore

Совместимость с Microsoft ® Windows ® 7 / 7 64-bit / Vista TM /

Поддержка 64-разрядной версии Vista TM / XP / XP 64-bit

- FCC, CE, WHQL

112

совместимый с ErP/EuP)

* Для детальной информации продукта, пожалуйста посетите наш вебсайт:



1.3 Установка перемычек

Конфигурация перемычек иллюстрируется на рисунке. Когда перемычка надета на контакты, они называются “замкнутыми”

(short). Если на контактах перемычки нет, то они называются “разомкнутыми” (open).

На иллюстрации показана 3-контактная перемычка, у которой контакты 1 и 2 замкнуты.

Перемычка

Очистка CMOS

(CLRCMOS1,

3-контактная перемычка)

(см. стр. 2, п. 22)

Установка

Стандартные Очистка CMOS

Описание очистки данных и восстановления заводских системных параметров сначала выключите компьютер и отсоедините сетевую вилку кабеля питания от электророзетки. Выждите не менее 15 секунд и колпачковой перемычкой на 5 секунд перемкните штырьки 2 и 3 контактной колодки CLRCMOS1. Однако не производите очистку CMOS непосредственно после обновления BIOS. Если необходимо очистить CMOS сразу же после окончания обновления BIOS, то, перед очисткой CMOS, необходимо сначала выполнить загрузку системы, а затем завершить ее работу. Примите во внимание, что пароль, дата, время, профиль пользователя по умолчанию, идентификатор 1394 GUID и MAC-адрес будут очищены только тогда, когда будет извлечена из своего гнезда батарейка

CMOS.

Переключатель Clear CMOS работает так же, как перемычка Clear

CMOS.


113

114

Разъемы Serial ATA2

(SATA2_2_3, см. стр. 2, п. 15)

(SATA2_4_5, см. стр. 2, п. 16)

Разъемы Serial ATA3

(SATA3_A1_A2, см. стр. 2, п. 12)

(SATA3_A3_A4, см. стр. 2, п. 13)

(SATA3_0_1, см. стр. 2, п. 14)

Информационный кабель Serial ATA (SATA)

(дополнительно)

1.4 Колодки и разъемы на плате

Имеющиеся на плате колодки и разъемы НЕ ЯВЛЯЮТСЯ контактами для перемычек. НЕ УСТАНАВЛИВАЙТЕ перемычки на эти колодки и разъемы – это приведет к необратимому повреждению материнской платы!

четыре соединителя Serial ATA2 предназначаются для подключения внутренних устройств хранения с использованием интерфейсных кабелей SATA2. В настоящее время интерфейс SATA допускает скорость передачи данных до \ 3,0

Гбит/с. При установке жесткого диска в порт eSATA2 задней системы ввода/вывода, внутренний порт SATA2_3 не функционирует. шесть соединителя Serial ATA3 предназначаются для подключения внутренних устройств хранения с использованием нтерфейсных кабелей SATA3. В настоящее время интерфейс SATA допускает скорость передачи данных до \ 6,0

Гбит/с. При установке жесткого диска в порт eSATA3 задней системы ввода/вывода, внутренний порт SATA3_A4 не функционирует.

Информационный кабель интерфейса SATA / SATA2 / SATA3 не является направленным.

Любой из его соединителей может быть подключен либо к жесткому диску интерфейса SATA2 / SATA3 либо к материнской плате.


Кабель питания

Serial ATA (SATA)

(дополнительно) подключите к соединителю питания жесткого диска интерфейса SATA подключите к источнику питания

Присоедините кабель питания стандарта SATA с помощью соединителей на его черном конце с ответными соединителями питания на каждом из жестких дисков. Затем соедините белый конец кабеля питания стандарта.

Колодка USB 2.0

(9-контактный USB2_3)

(см. стр. 2, п. 25)


(см. стр. 2, п. 26)

USB_PWR

P-3

P+3

1

GND

P+2

P-2

USB_PWR

Помимо два стандартных портов USB 2.0 на панели вводавывода, на данной материнской плате предусмотрено три разъема поддерживает два порта USB 2.0.


(см. стр. 2, п. 27)

Колодка USB 3.0

IntA_P4_SSTX+

GND

GND

IntA_P5_D-

Помимо восемь стандартных

(19-контактный USB3_9_10)

Vbus IntA_P5_SSRXпортов USB 3.0 на панели ввода-

(см. стр. 2, п. 10) IntA_P4_SSRXIntA_P5_SSRX+ вывода, на данной материнской

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

GND плате предусмотрен два разъем

IntA_P5_SSTX-

USB поддерживает два порта USB 3.0.

IntA_P4_D-

IntA_P4_D+

IntA_P5_D+

DUMMY

(19-контактный USB3_11_12)

(см. стр. 2, п. 9) Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

115


116

Колодка инфракрасного модуля

(5-контактный IR1)

(см. стр. 2, п. 32)

IRTX

+5VSB

DUMMY

1

IRRX

GND

Датчик пользовательского инфракрасного модуля

(4-контактный CIR1)

(см. стр. 2, п. 28)

Аудиоразъем передней панели

(9-контактный HD_AUDIO1)

(см. cтр. 2, п. 35)

GND

PRESENCE#

OUT_RET

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

Данная колодка позволяет подключить дополнительный модуль беспроводного инфракрасного приемопередатчика.

Датчик можно использовать для подключения дистанционный приемник.

Этот интерфейс предназначен для присоединения аудиокабеля передней панели, обеспечивающего удобное подключение аудиоустройств и управление ими.

автоматического обнаружения разъемов (Jack Sensing), однако

для ее правильной pаботы кабель панели в корпусе должен

поддерживать HDA. При сборке системы следуйте инструкциям,

приведенным в нашем руководстве и руководстве пользователя

для корпуса.

аудиоинтерфейса передней панели следующим образом:

A. Подключите выводы Mic_IN (MIC) к контактам MIC2_L.

B. Подключите выводы Audio_R (RIN) к контактам OUT2_R, а

выводы Audio_L (LIN) к контактам OUT2_L.

C. Подключите выводы Ground (GND) к контактам Ground (GND).

D. Контакты MIC_RET и OUT_RET предназначены только для

аудиопанели HD. При использовании аудиопанели AC’97

подключать их не нужно.

E. Процедура активации микрофона приведена ниже.

Для ОС Windows ® XP / XP 64-бита:

Выберите «Mixer» (Микшер). Выберите «Recorder» (Устройство

записи). Затем щелкните «FrontMic» (Передний микрофон).

Для ОС Windows ® 7 / 7 64-бита, Vista TM / Vista TM 64-бита:

Перейдите к вкладке «FrontMic» (Передний микрофон) в панели

управления Realtek. Отрегулируйте уровень «Recording

Volume» (Громкость записи).

Колодка системной панели

(9-контактный PANEL1)

(см. стр. 2, п. 20)

Данная колодка обеспечивает работу нескольких функций передней панели системы.


Колодка динамика корпуса

(4-контактный SPEAKER1)

(см. стр. 2, п. 21) разъем Power LED

(3-контактный PLED1)

(см. стр. 2, п. 19)

Подключите к этому разъему кнопку питания, кнопку сброса и индикатор состояния системы на корпусе в соответствии с указанным ниже назначением контактов. При подключении кабелей необходимо соблюдать полярность положительных и отрицательных контактов.

Подключите к этим контактам кнопку питания на передней панели корпуса. Способ выключения системы с помощью кнопки питания можно настроить.

Подключите к этим контактам кнопку сброса на передней панели корпуса. Нажмите кнопку сброса для перезагрузки компьютера, если компьютер «завис» и нормальную перезагрузку выполнить не удается.

Подключите к этим контактам индикатор состояния питания на передней панели корпуса. Этот индикатор светится, когда система работает. Индикатор мигает, когда система находится в режиме ожидания S1/S3. Этот индикатор не светится, когда система находится в режиме ожидания S4, либо выключена (S5).

Подключите к этим контактам индикатор активности жесткого диска на передней панели корпуса. Этот индикатор светится, когда осуществляется считывание или запись данных на жестком диске.

Конструкция передней панели может различаться в зависимости от корпуса. Модуль передней панели в основном состоит из кнопки питания, кнопки сброса, индикатора питания, индикатора активности жесткого диска, динамика и т.п. При подключении к этому разъему модуля передней панели корпуса удостоверьтесь, что провода подключаются к соответствующим контактам.

1

PLED-

PLED+

PLED+

Подключите к этой колодке кабель от динамика на корпусе компьютера.

Подключите индикатор Power LED к этому разъему для отображения статуса питания системы. Этот светодиод продолжит мигать в режиме S1/S3. Светодиод будет выключен в режимах S4 или S5

(система выключена).

117


Chassis и Power Fan-соединители

(4-контактный CHA_FAN1)

(см. стр. 2, п. 30)

Подключите кабели вентилятора к соединителям и присоедините черный шнур к штырю заземления.

(3-контактный CHA_FAN2) поддерживают

(см. стр. 2, п. 29)

(3-контактный CHA_FAN3)

(см. стр. 2, п. 44) функцию управления вентилятором.

(3-контактный PWR_FAN1)

(см. стр. 2, п. 3)

Разъем вентилятора процессора

(4-контактный CPU_FAN1)

(см. стр. 2, п. 4)

4 3 2 1

Подключите к этому разъему кабель вентилятора процессора так, чтобы черный провод соответствовал контакту земли.

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Данная материнская плата поддерживает вентиляторы процессора с

4-контактным разъемом (функция тихого режима вентилятора), однако

вентиляторы с 3-контактным разъемом также будут успешно работать, хотя

функция управления скоростью вращения вентилятора окажется

недоступной. Если вы хотите подключить вентилятор процессора с

3-контактным разъемом к разъему вентилятора процессора на данной

материнской плате, для этого следует использовать контакты 1-3.

Контакты 1-3 подключены

Установка вентилятора с 3-контактным разъемом

(3-контактный CPU_FAN2)

(см. стр. 2, п. 5)

Колодка питания ATX

(24-контактный ATXPWR1)

(см. стр. 2, п. 8)

12 24

Подключите к этой колодке кабель питания ATX.

1 13

118

Несмотря на то, что эта материнская плата предусматривает 24-штыревой разъем питания ATX, работа будет 12 продолжаться, даже если адаптируется традиционный

20-штыревой разъем питания ATX. Для использования

20-штыревого разъема питания ATX вставьте источник питания вместе со штекером 1 и штекером 13.

Установка 20-штыревого разъема питания ATX 1


24

13

Колодка питания 12V-ATX

(8-контактный ATX12V1)

(см. стр. 2, п. 1)

8 5

Подключите к этой колодке кабель питания ATX 12V.

4 1

Хотя эта объединительная плата обеспечивает ATX с 8 булавками 12V соединитель власти, это может все еще работать, если Вы принимаете традиционный ATX с 4-Pin 12V электропитание. Чтобы использовать электропитание ATX с 4-Pin, пожалуйста включите ваше электропитание наряду с Булавкой 1 и Прикрепите 5.

8 5

ATX С 4-Pin 12V Установка Электропитания

4 1

Разъем питания SLI/XFIRE

(4-контактный SLI/XFIRE_POWER1)

Данный разъем использовать не обязательно, но его следует

SLI/XFIRE_POWER1 подключить к разъему питания жесткого диска, если в системную плату одновременно установлены две видеокарты.

Колодки IEEE 1394

(9-контактный FRONT_1394)

(см. стр. 2, п. 31)

Колодка COM-порта

(9-контактный COM1)

(см. стр. 2, п. 33)

RXTPAM_0

GND

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

Помимо четырех портов IEEE

1394 на панели ввода-вывода имеются две группы контактов на материнской плате для подключения двух дополнительных портовIEEE 1394 каждая.

Данная колодка COM-порта позволяет подключить модуль порта COM.

Колодка HDMI_SPDIF

(2-контактный HDMI_SPDIF1)

(см. стр. 2, п. 34)

1

GND

SPDIFOUT

Колодка HDMI_SPDIF обеспечивает подачу выходного аудиосигнала на VGA-карту HDMI, что позволяет подключать к системе цифровые телевизоры, проекторы или жидкокристаллические панели разъемом HDMI_SPDIF на VGAкарте HDMI.

119


1.5 Быстрое переключение

На этой материнской плате есть три кнопки для ускорения работы: кнопка питания, кнопка перезагрузки и кнопка для очистки CMOS, которые позволяют пользователям быстро включить/выключить или перезагрузить компьютер, сбросить установки CMOS, соответственно.

Power Switch

(PWRBTN)

(см. стр. 2, п. 18)

Кнопка Power Switch позволяет быстро включить или выключить систему.

Reset Switch

(RSTBTN)

(см. стр. 2, п. 17)

Кнопка Reset Switch позволяет быстро перезагрузить систему.

Clear CMOS Switch

(CLRCBTN)

(см. стр. 3, п. 17)

Кнопка Clear CMOS Switch позволяет быстро сбросить установки CMOS.

120


2. Информация о BIOS

Утилита настройки BIOS (BIOS Setup) хранится во флэш-памяти на материнской плате.

Чтобы войти в программу настройки BIOS Setup, при запуске компьютера нажмите <F2> или <Del> во время самопроверки при включении питания (Power-On-Self-Test – POST).

Если этого не сделать, то процедуры тестирования POST будут продолжаться обычным образом. Если вы захотите вызвать BIOS Setup уже после POST, перезапустите систему с помощью клавиш <Ctrl> + <Alt> + <Delete> или нажатия кнопки сброса на корпусе системы. Подробную информацию о программе BIOS Setup вы найдете в Руководстве пользователя (в формате PDF) на компакт-диске поддержки.

3. Информация о компакт-диске

поддержки с программным

обеспечением

Данная материнская плата поддерживает различные операционные системы Microsoft ®

Windows ® : 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP / XP 64-bit. Поставляемый вместе с ней компакт-диск поддержки содержит необходимые драйверы и полезные утилиты, которые расширяют возможности материнской платы.

Чтобы начать работу с компакт-диском поддержки, вставьте его в дисковод CD-ROM.

Если в вашем компьютере включена функция автозапуска (AUTORUN), то на экране автоматически появится главное меню компакт-диска (Main Menu). Если этого не произошло, найдите в папке BIN на компакт-диске поддержки файл ASSETUP.EXE и дважды щелкните на нем, чтобы открыть меню.


121

122

1. Introdução

Gratos por comprar nossa placa–mãe Z77 WS um produto confi ável feito com AS-

Rock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.

Este Guia de Instalação Rápida apresenta a placa-mãe e o guia de instalação passo a passo. Mais informações detalhadas sobre a placa-mãe podem ser encontradas no manual do usuário do CD de suporte.

Porque as especifi cações da placa mãe e o software de BIOS poderiam ser atualizados, o conteúdo deste manual pode ser cambiado sem aviso.

Em caso de qualquer modifi cação deste manual, a versão atualizada estará disponível no website de ASRock sem prévio aviso. Pode também encontrar as listas das mais recentes placas VGA e das CPUs suportadas no site da web da ASRock.

Website de ASRock http://www.asrock.com

Se precisar de apoio técnico em relação a este placa-mãe, por favor visite o nosso sítio da internet para informação específi ca acerca do modelo que está a utilizar.


1.1 Este pacote contém

Placa-mãe ASRock Z77 WS

(Formato ATX: 12,0 pol. x 9,6 pol., 30,5 cm x 24,4 cm)

Guia de instalação rápida da ASRock Z77 WS

CD de suporte da placa ASRock Z77 WS

Seis cabo de dados ATA Serial (SATA) (Opcional)

Um cabo de alimentação da unidade de disco rígido ATA Serial (SATA) (Opcional)

Uma proteção I/O

Dois Placa Bridge_SLI ASRock

Um Placa 3S_Bridge_SLI ASRock

Um Placa Bridge_SLI 3-Way ASRock

A ASRock recorda-lhe...

Para obter melhor desempenho em Windows ® 7 / 7 64-bit / Vista TM /

Vista TM 64-bit, recomendamos que defi na a opção Confi guração de Armazenamento na BIOS para o modo AHCI. Para mais detalhes acerca da confi guração da BIOS consulte o “Manual de utilizador” no nosso CD de suporte.


1.2 Especifi cações

Plataforma

CPU

Chipsets

Memória

- Formato ATX: 12,0 pol. x 9,6 pol., 30,5 cm x 24,4 cm

- Design de condensadores banhados a ouro de alta qualidade

(Condensadores de polímeros condutores de alta qualidade

100% fabricados no Japão)

- Suporta Intel ® Core TM i7 / i5 / i3 de 3ª e 2ª geração no pacote

LGA1155

- Design de Poder Digital

- Alimentação de 8 + 4 fases

- Suporta a tecnologia Intel ®

Smart Connect

Turbo Boost 2.0

- Suporta K-Series desbloqueado CPU

- Intel ® Z77

- Suporta a tecnologia Rapid Start da Intel ® e a tecnologia

- Suporte à tecnologia de memória de duplo canal

- 4 x slots de DDR3 DIMM

- Suporta memória DDR3 3000+(OC)/2400(OC)/2133(OC)/1866

(OC)/1600/1333/1066, não ECC, sem tampão

- Capacidade máxima de memória do sistema: 32GB

- Suporta Extreme Memory Profi le (XMP)1.3/1.2 da Intel ®

Slots de

Expansão

- 5 x slots de PCI Express 3.0 x16 (PCIE2: versão x16 ou

PCIE1/PCIE3/PCIE5/PCIE7: x16/0/16/0 ou versão x8/8/8/8)

* O modo PCIE 3.0 apenas é suportado com a CPU Ivy Bridge

da Intel ® A CPU Sandy Bridge da Intel ® apenas suporta o

modo PCIE 2.0.

- 1 x slot de PCI Express 2.0 x16 (PCIE4 modo @ x4)

- 1 x slot de PCI Express 2.0 x1

- Suporta Quad CrossFireX TM , 4-Way CrossFireX TM , 3-Way

CrossFireX TM e CrossFireX TM da AMD

- Suporta Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM e SLI TM da

NVIDIA ®

VGA integrado * As saídas Intel ® HD Graphics Built-in Visuals e VGA são

suportadas apenas por processadores com GPU integrada.

- Suporta Intel ® HD Graphics Embutido Visuals: Intel ® Quick



- Pixel Shader 5.0, DirectX 11 com Intel ® Ivy Bridge CPU, Pixel

Shader 4.1, DirectX 10.1 com processadores Intel ® Sandy

Bridge CPU

- Memória partilhada máxima 1760MB

123


124

- Suporta HDMI 1.4a Tecnologia com resolução máxima até

1920x1200 @ 60Hz

- Suporta as funções Auto Lip Sync (Sincronização automática

do som), Deep Color (Profundidade da cor) (12bpc), xvYCC e

HBR (áudio de taxa de bits elevada) com HDMI (é necessário

um monitor compatível com a norma HDMI)

- Suporta função HDCP com portas HDMI

- Suporta a norma Blu-ray de alta defi nição 1080p (BD) / e a

Áudio

LAN

reprodução de DVDs de alta defi nição com portas HDMI

- Áudio HD de 7.1 canais com protecção de conteúdo


- Suporte áudio Blu-ray superior


- Broadcom BCM57781

- Suporta Wake-On-LAN

- Suporta Ethernet com Efi ciência Energética 802.3az

- Suporta LAN duplo com Teaming função

- Suporta PXE

Armazenamento - 2 x conectores SATA3 a 6,0 Gb/s através Z77 da Intel ® , com

suporte para RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage e Intel Smart Response Technology), NCQ,

AHCI e funções Hot Plug

- 4 x conectores SATA3 a 6,0 Gb/s através de ASM1061 da

ASMedia, com suporte para NCQ, AHCI e funções Hot Plug

(O conector SATA3_A4 é partilhado com a porta eSATA3)

- 4 x conectores SATA2 a 3,0 Gb/s através Z77 da Intel ® , com

suporte para RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel

Rapid Storage e Intel Smart Response Technology), NCQ,

AHCI e funções Hot Plug

Entrada/Saída Panel

pelo painel - 1 x porta para teclado/mouse PS/2

- 1 x porta HDMI

- 1 x Porta de saída SPDIF óptica

- 2 x porta USB 2.0 padrão

- 1 x Conector eSATA3

- 8 x portas USB 3.0 padrão

- 2 x porta LAN RJ-45 com LED (LED ACT/LIG e LED

VELOCIDADE)

- 1 x porta IEEE 1394

- 1 x Interruptor para limpar o CMOS com LED

- Ficha de áudio HD: Altifalante traseiro/Central/Baixos/Entrada

de linha/Altifalante frontal/Microfone


USB3.0 - 4 x Portas USB 3.0 traseiras através de Z77 da Intel ® , com

suporte para USB 1.0/2.0/3.0 até 5Gb/s

- 4 x Portas USB 3.0 traseiras através de EJ188 da Etron, com

suporte para USB 1.0/2.0/3.0 até 5Gb/s

- 2 x Conector USB 3.0 frontal (suporta 4 portas USB 3.0)

Conectores

através de EJ188 da Etron, com suporte para USB 1.0/2.0/3.0

até 5Gb/s

- 1 x Conector do módulo de infravermelho

- 1 x Conector CIR

- 1 x conector de porta COM

- 1 x Conector HDMI_SPDIF

- 1 x Conector IEEE 1394

- 1 x Conector para LED de alimentação

- 2 x Conector do ventilador da CPU (1 x 4 pinos, 1 x 3 pinos)

- 3 x Conector do ventilador da chassis

(1 x 4 pinos, 2 x 3 pinos)

- 1 x Conector do ventilador da energia (3 pinos)

- Conector de força do ATX de 24 pinos

- Conector ATX 12 V de 8 pinos

- Conector de alimentação SLI/XFire

- Conector Áudio do painel frontal

- 3 x cabezal USB 2.0 (suporta 6 portas USB 2.0)

- 2 x cabezal USB 3.0 (suporta 4 portas USB 3.0)

- 1 x Dr. Debug com LED

- 1 x Interruptor de alimentação LED

BIOS

- 1 x Interruptor de reposição LED

- 1 x Interruptor para limpar o CMOS com LED

- 64Mb BIOS UEFI ofi cial da AMI com suporte para GUI

- Suporta dispositivos “Plug and Play”

- ACPI 1.1 atendendo a eventos de “wake up”

- Suporta dispositivos sem jumper

- Suporte para SMBIOS 2.3.1

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltage

Multi-adjustment

CD de suporte - Controladores, utilitários, software antivírus (Experimentacao

Versao), CyberLink MediaEspresso 6.5 versão de

demonstração, ASRock MAGIX Multimedia Suite - OEM

Monitor do HW - Sensores de temperature do procesador

- Medição de temperatura da placa-mãe

- Tacômetros de ventilador do Processador/chassis/energia

- Ventoinha silenciosa para a CPU/chassis (Permitir velocidade

Chassis Auto-Ajuste de temperatura da CPU)

125


- CPU/Chassis Fan Controle Multi-Velocidade

Sistema

Operacional

Certifi cações

- Monitoramento de voltagem : +12 V, +5 V, +3.3 V, Vcore

- Microsoft ® Windows

- FCC, CE, WHQL

® 7 / 7 de 64 bits / Vista

bits / XP / XP de 64 bits

TM / Vista TM de 64

- “ErP/EuP Ready” (é necessária alimentação eléctrica “ErP/

EuP Ready”)

* Para informações mais detalhadas por favor visite o nosso sítio Web: http://www.asrock.com

126


1.3 Confi guração dos Jumpers

A ilustração mostra como os jumpers são confi gurados. Quando há uma capa de jumpers sobre os pinos, diz–se que o jumper está “curto”. Não havendo capa sobre os pinos, o jumper está “aberto”. A ilustração mostra um jumper de 3 pinos em que os pinos 1 e 2 están “curtos” quando a capa de jumper estiver colocada sobre esses 2 pinos.

Jumper

Restaurar CMOS

Confi guração

(CLRCMOS1, jumper de 3 pinos)

(veja a folha 2, No. 22)

Confi guração-padrão Limpar o CMOS

Nota: CLRCMOS1 permite você limpar os dados em CMOS. Os dados em CMOS incluem informações da confi guração do sistema como: por exemplo a senha do sistema, data, tempo, e os parámetros da confi guração do sistema. Para limpar e reconfi gurar os parámetros do sistema a confi guração inicial da fábrica, por favor desligue o cabo de força, ponha em curto–circuito os pin 2 e pin 3 de CLRCMOS1 por mais de 5 segundos para limpar o CMOS usando um jumper. Por favor lembrese de remover o jumper depois de limpar o

COMS. Se precisar limpar o CMOS ao concluir a atualização do BIOS, deverá reiniciar o sistema primeiro e, em seguida, desligá-lo antes de executar a ação de limpeza o CMOS. Tenha em atenção que a palavra-passe, data, hora, perfil predefinido de utilizador, 1394 GUID e endereço MAC apenas serão limpos se a bateria do CMOS for retirada.

O Interruptor para limpar o CMOS tem a mesma função do Jumper para limpar o CMOS.


127

1.4 Conectores

Os conectores NÃO SÃO jumpers. NÃO coloque capas de jumper sobre estes conectores. A colocação de pontos de jumper sobre os conectores causará danos irreversíveis à placa-mãe.

Conectores ATA2 Serial

(SATA2_2_3: veja a folha 2, No. 15)

(SATA2_4_5: veja a folha 2, No. 16)

Estes quatro conectores Serial

ATA (SATA2) suportam unidades de disco rígido SATA ou SATA2 como dispositivos de atual interface SATA2 permite uma taxa de transferência de dados de até 3.0 Gb/s.

Conectores ATA3 Serial

(SATA3_A1_A2: veja a folha 2, No. 12)

(SATA3_A3_A4:

Estes seis conectores Serial

ATA (SATA3) suportam unidades de disco rígido SATA ou SATA3 como dispositivos de veja a folha 2, No. 13) internos.

(SATA3_0_1: veja a folha 2, No. 14) atual interface SATA3 permite uma taxa de transferência de dados de até 6.0 Gb/s. Se tiver ligado a porta eSATA3 no painel de entrada/saída existente na parte de trás, a função

SATA3_A4 interna não

funcionará.

Cabo de dados

ATA (SATA)

(opcional)

Tanto a saída do cabo de Serial dados SATA pode ser conectado ao disco rígido SATA

/ SATA2 / SATA3 quanto o conector SATA2 / SATA3 na

128


Cabo de Alimentação

ATA (SATA)

(opcional)

Ligue no conector de alimentação SATA HDD

Conecte a fonte

Cabezal USB 2.0

(USB2_3 de 9 pinos)


(USB4_5 de 9 pinos)


USB_PWR

P-3

P+3

1

GND

P+2

P-2

USB_PWR

Conecte a saída de cor preta do cabo de alimentação SATA ao conector de alimentação em cada acionador. Em seguida, conecte a saída branca do cabo de alimentação

SATA ao conector de alimentação da fonte.

Além das dois portas USB 2.0 por defeito no painel de entrada/saída, há três ligações

USB 2.0 nesta placa-mãe.

Cada ligação USB 2.0 pode suportar dois portas USB 2.0.

(USB6_7 de 9 pinos)


Cabezal USB 2.0

(USB3_9_10 de 19 pinos)


Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(USB3_11_12 de 19 pinos)

(veja a folha 2, No. 9) Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

Além das oito portas USB 3.0 por defeito no painel de entrada/saída, há dois ligações

USB 3.0 nesta placa-mãe.

Cada ligação USB 3.0 pode suportar dois portas USB 3.0.

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

129


130

Conector do módulo de infravermelho

(IR1 de 5 pinos)


IRTX

+5VSB

DUMMY

1

GND

IRRX

Este conector suporta um módulo de infravermelho para transmissão e recepção sem fi o, opcional.

Conector do módulo de infravermelhos

(CIR1 de 4 pinos)

1

IRRX

GND

Este conector pode ser utilizado para ligar o receptor do controlo

remoto.


Conector Áudio do painel frontal

(HD_AUDIO1 de 9 pinos)


GND

PRESENCE#

MIC_RET

OUT_RET

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

Esta é uma interface para o cabo de áudio no painel frontal, que permite uma conexão e controle convenientes dos dispositivos de áudio.

1. Áudio de elevada defi nição que suporta a sensibilidade da tomada,

mas o fi o do painel existente no chassis tem de suportar HDA para

funcionar correctamente. Siga s instruções que aparecem no manual

e no manual do chassis para instalar o sistema.

2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio

do painel frontal, como a fi gura abaixo mostra:

A. Ligue o Mic_IN (MIC) ao MIC2_L.

B. Ligue o Audio_R (RIN) ao OUT2_R e o Audio_L (LIN) ao OUT2_L.

C. Ligue o Ground (GND) ao Ground (GND).

D. MIC_RET e OUT_RET são apenas para o painel de áudio HD. Não

necessita de os ligar para o painel de áudio AC’97.

E. Para activar o microfone frontal.

Para os Sistemas Operativos Windows ® XP / XP 64 bits:

Seleccione “Misturador”. Seleccione “Gravador”. Depois clique

em “Microfone frontal”.

Para os Sistemas Operativos Windows ® 7 / 7 64-bit / Vista TM /

Vista TM 64-bit:

Aceda ao separador “Microfone frontal” no painel de Controlo

Realtek. Ajuste o “Volume de gravação”.

Conector do painel do sistema

(PANEL1 de 9 pinos)

Este conector acomoda várias funções do painel frontal do

(veja a folha 2, No. 20) sistema.


Ligue o botão de alimentação, o botão de reposição e o indicador do estado do sistema no chassis a este conector de acordo com a descrição abaixo. Tenha em atenção os pinos positivos e negativos antes de ligar os cabos.

PWRBTN (Botão de alimentação):

Ligue ao botão de alimentação no painel frontal do chassis. Pode confi gurar a forma para desligar o seu sistema através do botão de alimentação.

RESET (Botão de reposição):

Ligue ao botão de reposição no painel frontal do chassis. Prima o botão de reposição para reiniciar o computador caso este bloqueie e não seja possível reiniciar normalmente.

PLED (LED de alimentação do sistema):

Ligue ao indicador do estado da alimentação no painel frontal do chassis.

O LED fi cará acesso quando o sistema estiver em funcionamento. O LED fi cará intermitente quando o sistema estiver no estado de suspensão S1/

S3. O LED fi cará desligado quando o sistema estiver nos estados de suspensão S4 ou desligado (S5).

HDLED (LED de actividade do disco rígido):

Ligue ao LED de actividade do disco rígido no painel frontal do chassis. O

LED fi cará acesso quando o disco rígido estiver a ler ou a escrever dados.

O design do painel frontal poderá variar dependendo do chassis. Um módulo de painel frontal consiste principalmente em um botão de alimentação, um botão de reposição, um LED de alimentação, um LED de actividade do disco rígido, um altifalante, etc. Ao ligar o seu módulo de painel frontal do chassis a este conector, certifi que-se que os fi os e os pinos têm uma correspondência exacta.

Conector do alto-falante do chassi

(SPEAKER1 de 4 pinos)


1

+5V DUMMY

Ligue o alto-falante do chassi neste conector.

Conector do LED de alimentação

(PLED1 de 3 pinos)


1

PLED-

PLED+

PLED+

Ligue o LED de alimentação do chassis a este conector para indicar o estado de alimentação do sistema. O LED fi cará acesso quando o sistema estiver em funcionamento. O

S1/S3. O LED fi ca desligado nos estados S4 ou no estado

(desligado).

131


Conector do ventilador do chassis/energia

(CHA_FAN1 de 4 pinos)






(PWR_FAN1 de 3 pinos)


Ligue o cabo do ventilador neste conector, coincidindo o fi o preto com o pino de aterramen to. CHA_FAN1, CHA_FAN2 e

CHA_FAN3 suportam a função de Controlo de Ventoinha.

Conector do ventilador da

CPU

(CPU_FAN1 de 4 pinos)


4 3 2 1

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Ligue o cabo do ventilador da

CPU, coincidindo o fi o preto com o pino de aterramento.

Apesar de esta placa-mãe possuir 4 apoios para uma ventoinha de CPU

(Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar

mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar

uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta

placa-mãe, por favor, ligue-a aos pinos 1-3.

Pinos 1-3 ligados

Instalação de Ventoinha de 3 pinos

(CPU_FAN2 de 3 pinos)


132

Conector de força do ATX

(ATXPWR1 de 24 pinos)


12 24

Ligue a fonte de alimentação

ATX neste conector.

1 13

Embora esta placa-mãe providencie um conector de energia ATX de 24 pinos, pode apesar disso funcionar com a adapta-ção de uma fonte de energia tradicional de 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13.

12

Instalação da Fonte de alimentação ATX de 20 Pinos 1


24

13

Conector de força do ATX 12V

(ATX12V1 de 8 pinos)


8 5

4 1

Ligue a fonte de alimentação

ATX 12V neste conector.

Embora esta placa-mãe providencie um conector de energia ATX 12V de 8 pinos, pode apesar disso funcionar com a adapta-ção de uma fonte de energia tradicional de 4 pinos. Para usar a fonte de alimentação de 4 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 5.

8 5

Instalação da Fonte de alimentação ATX 12V de 4 Pinos

4 1

Conector de alimentação SLI/XFIRE

(SLI/XFIRE_PWR1 de 4 pinos)


SLI/XFIRE_POWER1

Cabezal IEEE 1394

(FRONT_1394 de 9 pinos)


RXTPAM_0

GND

RXTPBM_0

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

Conector de porta de série

(COM1 de 9 pinos)


Não é necessário utilizar este conector, mas deverá ligá-lo a um conector de alimentação de disco rígido quando estiver a utilizar duas placas gráfi cas com esta placa principal.

Além das uns portas IEEE 1394 por defeito no painel de entrada/saída, há uns ligações

IEEE 1394 nesta placa-mãe.

Cada ligação IEEE 1394 pode suportar dois portas IEEE 1394.

Este conector COM1 suporta um módulo de porta de série.

Conector HDMI_SPDIF

(HDMI_SPDIF1 de 2 pinos)


1

GND

SPDIFOUT

O conector HDMI_SPDIF, que oferece saída de áudio SPDIF para placas VGA HDMI, permite ligar televisores digitais/ projectores/LCD com entrada

HDMI ao sistema. Ligue o conector HDMI_SPDIF da placa

VGA HDMI a este conector.

133


1.5 Interruptores inteligentes

A placa principal tem três interruptores inteligentes: interruptor de alimentação, interruptor de reposição e interruptor para limpar o CMOS, que permitem aos utilizadores ligar/desligar ou repor o sistema e limpar os valores CMOS rapidamente.

Interruptor de alimentação

(PWRBTN)


O interruptor de alimentação é um interruptor inteligente, que permite aos utilizadores ligar/ desligar o sistema rapidamente.

Interruptor de reposição

(RSTBTN)


RESET

O interruptor de reposição é um interruptor inteligente, que permite aos utilizadores repor o

Interruptor para limpar o CMOS

(CLRCBTN)

(veja a folha 3, No. 17) clr

CMOS

O interruptor para limpar o

CMOS é um interruptor inteligente, que permite aos uti lizadores limpar os valores

134


2. Informações da BIOS

O Utilitário de Confi guração do BIOS está armazenado no chip FWH do BIOS. Ao iniciar o computador, pressione <F2> ou <Del> durante o Autoteste de iniciação

(POST) para acessar o Utilitário de Confi guração do BIOS; caso contrário, o POST continuará com as rotinas de teste. Se desejar acessar o Utilitário de Confi guração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> + <Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as informações detalhadas sobre o Utilitário de Confi guração do BIOS, consulte o Manual do Usuário

(arquivo PDF) no CD de suporte.

3. Informações do CD de Suporte

Esta placa Mãe suporta vários sistemas operacionais: Microsoft ® Windows ® : 7 / 7 de 64 bits / Vista TM / Vista TM de 64 bits / XP / XP de 64 bits. O CD de instalação que acompanha a placa Mãe contem: drivers e utilitários necessários para um melhor desempenho da placa Mãe. Para começar a usar o CD de instalação, introduza o

CD na leitora de CD-ROM do computador. Automaticamente iniciará o menu principal, casa o AUTORUN esteja ativado. Se o menu principal não aparecer automaticamente, explore o CD e execute o “ASSETUP.EXE” localizado na pasta BIN.


135

136

1. Giriş

ASRock’ın kesintisiz titiz kalite denetimi altında üretilen güvenilir bir anakart olan

ASRock Z77 WS anakartını satın aldığınız için teşekkür ederiz. ASRock’ın kalite ve dayanıklılık konusundaki kararlılığına uygun güçlü tasarımıyla mükemmel bir performans sunar.

Bu Hızlı Takma Kılavuzu anakarta giriş ve adım adım takma kılavuzu içerir. Anakart hakkında daha ayrıntılı bilgiyi Destek CD’sinde sunulan kullanıcı kılavuzunda bulabilirsiniz.

Anakart özellikleri ve BIOS yazılımı güncelleştirilebileceğinden bu kılavuzun içeriği

önceden haber verilmeksizin değişebilir. Bu belgede değişiklik yapılması durumunda,

güncelleştirilmiş sürüm ayrıca haber verilmeksizin ASRock web sitesinde sunulur. En son VGA kartlarını ve CPU destek listelerini de ASRock web sitesinde bulabilirsiniz.

ASRock web sitesi http://www.asrock.com

Bu anakartla ilgili teknik desteğe ihtiyacınız olursa, kullandığınız modele özel bilgiler için lütfen web sitemizi ziyaret edin.


1.1 Paket İçindekiler

ASRock Z77 WS Anakart

(ATX Form Faktörü: 12,0-inç x 9,6-inç, 30,5 cm x 24,4 cm)

ASRock Z77 WS Hızlı Takma Kılavuzu

ASRock Z77 WS Destek CD’si

6 x Seri ATA (SATA) Veri Kablosu (İsteğe Bağlı)

1 x Seri ATA (SATA) HDD Güç Kablosu (İsteğe Bağlı)

1 x G/Ç Panel Kalkanı

2 x ASRock SLI_Bridge Kartı

1 x ASRock SLI_Bridge_3S Kartı

1 x ASRock 3-Yollu SLI Köprü Kart

ASRock Size Şunu Hatırlatır...

Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit ile daha iyi performans elde etmek için, Depolama Konfi gürasyonundaki BIOS seçeneğini AHCI moduna ayarlamanız tavsiye edilir. BIOS ayarı için, ayrıntıları öğrenmek

üzere lütfen destek CD'mizdeki "Kullanıcı Kılavuzu"na bakın.


1.2 Özellikler

Platform - ATX Form Faktörü: 12,0-inç x 9,6-inç, 30,5 cm x 24,4 cm

CPU - LGA1155 Paketi’deki 3. ve 2. Nesil Intel ® Core TM i7 / i5 / i3’yi destekler

- Tasarımı

- 8 + 4 Güç Fazı Tasarımı

Yonga seti - Intel ® Z77

Bellek destekler

- Çift Kanallı DDR3 Belleği Teknolojisi

- 4 x DDR3 DIMM yuva

1066 ECC olmayan, ara belleksiz bellek

Genişletme

Yuvası

- 5 x PCI Express 3.0 x16 yuva (PCIE2: x16 modu veya PCIE1/

PCIE3/PCIE5/PCIE7: x16/0/16/0 modu veya x8/8/8/8 modu)

* PCIE 3.0, sadece Intel ® Ivy Köprü İşlemcisiyle desteklenir.

Intel ® Sandy Köprü İşlemciyle, sadece PCIE 2.0'ı destekler.

- 1 x PCI Express 2.0 x16 yuva (PCIE4: x4 modu)

- 1 x PCI Express 2.0 x1 yuva

CrossFireX TM , 4-Way CrossFireX TM , 3-Way

CrossFireX TM ve CrossFireX TM ’i destekler

Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM ve SLI TM ’yı destekler

GPU entegre işlemciler tarafından desteklenmektedir.

HD Graphics Dahili Görselleri: Intel ® Hızlı Eşitleme

Videosu 2.0, Intel ® InTru TM 3D, Intel ® Clear Video HD

Insider TM , Intel ® HD Graphics 2500/4000

- Pixel Shader 5.0, Intel ® Ivy Bridge işlemciye sahip DirectX 11.

Pixel Shader 4.1,Intel ® Sandy Bridge işlemciye sahip DirectX

10.1

- 60Hz’de 1920x1200’e kadar maks. зцzьnьrlьkle HDMI 1.4a

- Auto Lip Sync, Deep Color (12bpc), HDMI ile xvYCC ve

137


HBR’yi (Yьksek Bit Hэzlэ Ses) destekler (Uyumlu HDMI monitцr gerekir)

Ses

LAN

Depolama

Arka Panel

G/З

138

USB 3.0 oynatэmэnэ destekler

Ses

- Premium Blu-ray ses desteği

- PCIE x1 Gigabit LAN 10/100/1000 Mb/sn

- LAN’da Uyan özelliğini destekler

- Enerji Verimli Ethernet 802.3az desteği

- Ekip oluşturma işlevi Çift LAN’ı destekler

- 2 x SATA3 6,0Gb/sn Intel ® Z77 konektör, donanım RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage ve

Intel Smart Response Teknolojisini), NCQ, AHCI ve “Sistem

Açıkken Bileşen Takma” işlevlerini

- 4 x SATA3 6,0Gb/sn ASMedia ASM1061 konektör, donanım

NCQ, AHCI ve “Sistem Açıkken Bileşen Takma” işlevlerini

(SATA3_A4 konektörü eSATA3 portuyla paylaşılır) destekler

- 4 x SATA2 3,0Gb/sn Intel ® Z77 konektör, donanım RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage ve

Intel Smart Response Teknolojisini), NCQ, AHCI ve “Sistem

Açıkken Bileşen Takma” işlevlerini

G/З Paneli

- 1 x PS/2 Klavye/Fare Portu

- 1 x HDMI Portu

- 1 x Optik SPDIF Зэkэюэ Portu

- 2 x Kullanэma Hazэr USB 2.0 Portu

- 1 x eSATA3 Konektörü

- 8 x Kullanэma Hazэr USB 3.0 Portu

- 2 x RJ-45 LAN Portu, LED’li (AKT/LЭNK LED’i ve HIZ LED’i)

- 1 x IEEE 1394 Konektörü

- 1 x CMOS’u Temizleme Anahtarı

- HD Ses Jakı: Arka Hoparlör/Orta/Bas/Hat Girişi/Ön Hoparlör/

Mikrofon

- Intel ® Z77 tarafından 4 x Arka USB 3.0 bağlantı noktası,

5Gb/s’ye kadar USB 1.0/2.0/3.0

- Etron EJ188 tarafından 4 x Arka USB 3.0 bağlantı noktası,

5Gb/s’ye kadar USB 1.0/2.0/3.0

- Etron EJ188 tarafından 2 x Ön USB 3.0 bağlantısı (4 USB 3.0


Konektör

BIOS Özelliği bağlantı noktasını destekler), 5Gb/s’ye kadar USB 1.0/2.0/3.0

- 1 x KÖ fi şi

- 1 x COM portu fi şi

- 1 x HDMI_SPDIF fi şi

- 1 x IEEE 1394 fi şi

- 1 x Güç LED’i fi şi

- 2 x CPU FAN konektörü (1 x 4-pinli, 1 x 3-pinli)

- 3 x Kasa FAN konektörü (1 x 4-pinli, 2 x 3-pinli)

- 1 x Güç FAN konektörü (3-pinli)

- 24 pin ATX güç konektörü

- 8 pin 12V güç konektörü

- SLI/XFire güç konektörü

- Ön panel ses konektörü

- 2 x USB 2.0 fi ş (4 USB 2.0 portu destekler)

- 1 x USB 3.0 fi ş (2 USB 3.0 portu destekler)

- 1 x Dr. Debug (7 Segmentli Hata Ayıklama LED’i)

- 1 x LED’li Güç Anahtarı

- 1 x LED’li Sıfırlama Anahtarı

- 1 x LED’li CMOS’u Temizleme Anahtarı

- 64 Mb GUI destekli AMI UEFI Geçerli BIOS

- ACPI 1.1 Uyumlu Uyandırma Olayları

- SMBIOS 2.3.1 Desteği

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA Voltaj Çoklu ayarı

Sürümü), CyberLink MediaEspresso 6.5 Deneme Sürümü,

ASRock MAGIX Multimedya Seti - OEM

- CPU Sıcaklık Duyarlılığı

- Kasa Sıcaklık Duyarlılığı

Donanım

Monitör

- İşlemci/Kasa Sessiz Fanı (Kasa Fan Hızı’nın İşlemci sıcaklığı

ile Otomatik Ayar’ına izin verir)

- CPU/Kasa Fan Çoklu-Hız Kontrolü

İS - ® Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit / XP /

Sertifi kalar

XP 64-bit uyumlu

- FCC, CE, WHQL

- Hazır (ErP/EuP hazır güç kaynağı gerekli)

* Ayrıntılı ürün bilgileri için lütfen web sitemizi ziyaret edin: http://www.asrock.com

139


1.3 Jumper'ların Ayarı

Şekilde jumper'ların nasıl ayarlandıkları gösterilmektedir. Jumper kapağı pinler üzerine yerleştirildiğinde jumper "Kapalı" dır. Jumper kapağı pinler üzerindeyken jumper "Açık" tır.

Şekilde pin1 ve pin2'si "Kapalı" olan jumper kapağı bu 2 pine yerleştirilmiş 3-pinli jumper gösterilmektedir.

CMOS’u temizleme

(CLRCMOS1, 3-pinli jumper)

(bkz. s.2 No. 22)

Default Clear CMOS parametrelerini temizlemek ve varsayılan ayara sıfırlamak için lütfen bilgisayarı kapatın ve güç kablosunun fi şini güç kaynağından çekin. 15 saniye bekledikten sonra, pin2 ve pin3‘ü CLRCMOS1’de 5 saniye kısaltmak için bir atlatıcı şapkası kullanın. Ancak, BIOS’u güncelledikten hemen sonra lütfen CMOS’u temizlemeyin.

BIOS’u güncellemeyi tamamladığınızda CMOS’u temizlemeniz gerekirse, ilk olarak sistemi başlatmanız ve ardından CMOS temizleme işlemini gerçekleştirmeden önce kapatmanız gereklidir. Parola, tarih, saat, kullanıcı varsayılan profi li, 1394 GUID ve MAC adresinin yalnızca CMOS pili çıkarıldığında temizleneceğini lütfen aklınızda bulundurunuz.

CMOS Devresini Temizle, CMOS Ayarı'nı Temizle ile aynı işleve sahiptir.

140


1.4 Yerleşik Fişler ve Konektörler

Yerleşik fi şler ve konektörler jumper DEĞİLDİR. Bu fi şlerin ve konektörlerin üzerine jumper kapakları YERLEŞTİRMEYİN. Fişlerin ve konektörlerin üzerine jumper kapakları yerleştirmek anakartın kalıcı olarak zarar görmesine neden olabilir!

Seri ATA2 Konektörler

(SATA2_2_3: bkz. s.2, No. 15)

Bu dört Seri ATA2 (SATA2) konektör, dahili depolama

(SATA2_4_5: bkz. s.2, No. 16) cihazları için SATA veri

kablolarını destekler. Geçerli

SATA2 arayüzü 3,0 Gb/sn veri aktarım hızına izin verir.

Seri ATA3 Konektörler

(SATA3_A1_A2: bkz. s.2, No. 12)

Bu altı Seri ATA3 (SATA3) konektör, dahili depolama

(SATA3_A3_A4: bkz. s.2, No. 13)

(SATA3_0_1: bkz. s.2, No. 14) cihazları için SATA veri

kablolarını destekler. Geçerli

SATA3 arayüzü 6,0 Gb/sn veri aktarım hızına izin verir. Arka

I/O’daki eSATA3 bağlantı noktasındaki HDD’yi yüklemek isterseniz, dahili SATA3_A4

çalışmayacaktır.

Seri ATA (SATA)

Veri Kablosu

(İsteğe bağlı)

SATA veri kablosunu her iki ucu da SATA / SATA2 / SATA3 sabit diskine veya anakarttaki

SATA2 / SATA3 konektörüne bağlanabilir.

Seri ATA (SATA) Güç Kablosu

(İsteğe bağlı)

Lütfen SATA güç kablosunun siyah ucunu her sürücüde bulunan güç konektörüne

SATA HDD güç konektörüne bağlama kablosunun beyaz ucunu güç güç kaynağına bağlama kaynağının güç konektörüne bağlayın.

141


USB 2.0 Fişleri

(9-pinli USB2_3)

(bkz. s.2 No. 25)

(9-pinli USB4_5)

(bkz. s.2 No. 26)

1

USB_PWR

P-3

P+3

GND

DUMMY

GND

P+2

P-2

USB_PWR

G/Ç panelindeki varsayılan iki

USB 2.0 portundan başka, bu anakartta üç USB 2.0 fi şi bulunur. Her USB 2.0 fi şi iki

USB 2.0 portunu destekler.

(9-pinli USB6_7)

(bkz. s.2 No. 27)

142

USB 3.0 Fişleri I/O panelinde bulunan sekiz

(19-pinli USB3_9_10)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

IntA_P5_SSRX+

(bkz. s.2 No. 10)

GND bağlantı noktasının yanı sıra, bu

GND IntA_P5_SSTXana kart üzerinde iki adet USB

IntA_P4_SSTX-

IntA_P4_SSTX+

IntA_P5_SSTX+

GND bağlantısı bulunur. Bu USB

GND IntA_P5_Dbağlantısı iki adet USB 3.0

IntA_P4_D-

IntA_P4_D+

IntA_P5_D+

DUMMY bağlantı noktasını destekleyebilir.

(19-pinli USB3_11_12)

(bkz. s.2 No. 9)

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

Kızılötesi Modülü Fişi

IRTX

+5VSB

(5-pinli IR1)

DUMMY

(bkz. s.2 No. 32)

1

GND

IRRX aktarma ve alma kızılötesi

(4-pinli CIR1)

(bkz. s.2 No. 28) destekler.


Ön Panel Ses Fişi

(9-pinli HD_AUDIO1)

GND

PRESENCE#

OUT_RET

(bkz. s.2 No. 35)

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

Bu, panel ses kablosu için sağlayan bir arayüzdür.

1. Yükse Tanımlı Ses Jak Duyarlılığını destekler, ancak kasadaki panel kablosunun

HDA'nın düzgün çalışmasını desteklemesi gerekir. Lütfen sisteminizi yüklemek

için kılavuzumuzdaki ve kasa kılavuzundaki talimatları izleyin.

2. AC'97 ses paneli kullanıyorsanız, lütfen ön panel ses fi şine aşağıdaki gibi takın:

A. Mic_IN'i (MIC) MIC2_L'ye bağlayın.

B. Audio_R'yi (RIN) OUT2_R'ye ve Audio_L'yi (LIN) OUT2_L'ye bağlayın.

C. Ground'u (GND) Ground'a (GND) bağlayın.

D. MIC_RET ve OUT_RET yalnızca HD ses paneli içindir. Bunları AC’97 ses

paneli için bağlamanız gerekmez.

E. Ön mikrofonu etkinleştirmek için

Windows ® XP / XP 64-bit İS için:

“Karıştırıcı”yı seçin. “Kaydedici”yi seçin. Sonra “Ön Mikrofon”u tıklatın.

Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64-bit İS için:

Realtek Kontrol panelinde “Ön Mikrofon” Sekmesine gidin. “Kayıt Ses

Seviyesi”ni ayarlayın.

Sistem Paneli Fişi

(9-pinli PANEL1)

(bkz. s.2 No. 20)

Bu fi ş, birçok sistem ön paneli işlevini barındırır.

Kasa üzerindeki güç anahtarını, sıfırlama anahtarını ve sistem durumu

Kabloları bağlamadan önce pozitif ve negatif pinlere dikkat edin.

PWRBTN (Güç Anahtarı):

Kasa üzerindeki güç anahtarını ön panele bağlayın. Güç anahtarını kullanarak sisteminizi kapatma şeklinizi yapılandırabilirsiniz.

RESET (Sıfırlama Anahtarı):

Kasa üzerindeki sıfırlama anahtarını ön panele bağlayın. Bilgisayar donarsa veya normal bir yeniden başlatma gerçekleştirilemezse, bilgisayarı yeniden başlatmak için sıfırlama anahtarına basın.

PLED (Sistem Gücü LED’i):

Kasa üzerindeki güç durumu göstergesini ön panele bağlayın. Sistem

çalışırken LED yanar. Sistem S1/S3 uyku modunda iken LED yanıp sön meye devam eder. Sistem S4 uyku modunda veya kapalı (S5) iken


143

144

HDLED (Sabit Disk Çalışma LED’i):

Kasa üzerindeki sabit disk çalışma LED'ini ön panele bağlayın. Sabit disk veri okurken veya yazarken LED yanar.

modülünde temel olarak güç anahtarı, sıfırlama anahtarı, güç LED’i,

atamalarının doğru biçimde eşleştirildiğinden emin olun.

Kasa Hoparlörü Fişi

(4-pinli SPEAKER1)

(bkz. s.2 No. 21)

Güç LED’i Fişi

(3-pinli PLED1)

1

(bkz. s.2 No. 19) PLED+

PLED-

PLED+

Kasa/güç Fan Konektörü

(4-pinli CHA_FAN1)

(bkz. s.2 No. 30)

(3-pinli CHA_FAN2)

(bkz. s.2 No. 29)

(3-pinli CHA_FAN3)

(bkz. s.2 No. 44)

(3-pinli PWR_FAN1)

(bkz. s.2 No. 3)

Lütfen kasa hoparlörünü bu fi şe bağlayın.

Sistem gücü durumunu belirtmek için lütfen kasa güç

çalışırken LED açıktır. LED S1/

S3 durumunda yanıp sönmeye devam eder. LED S3/S4 durumunda veya S5 durumun da (güç kapalı) kapalıdır.

Lütfen kasa fan kablolarını fanına bu konektöre bağlayın ve siyah kabloyu toprak pinine bağlayın. CHA_FAN1,

CHA_FAN2 ve CHA_FAN3 destekli Fan Denetimi.

CPU Fan Konektörü

4 3 2 1

4-pinli CPU_FAN1)

(bkz. s.2 No. 4)

CPU_FAN_SPEED

FAN_SPEED_CONTROL

Lütfen fan kablolarını CPU fanına bu konektöre bağlayın ve siyah kabloyu toprak pinine bağlayın.


Bu anakart 4-Pinli CPU fan (Sessiz Fan) desteği sağlasa da, 3-Pinli CPU

planlıyorsanız, lütfen Pin 1-3'e bağlayın.

Pin 1-3 Bağlı

3-Pinli Fanı Takma

(3-pinli CPU_FAN2)

(bkz. s.2 No. 5)

ATX Güç Konektörü

(24-pinli ATXPWR1)

(bkz. s.2 No. 8)

12 24

Lütfen bir ATX güç kaynağını bu konektöre bağlayın.

1 13

Bu anakart 24-pinli ATX güç konektörü sağlasa da geleneksel bir 20-pinli ATX güç kaynağı bağlarsanız da

çalışabilir. 20-pinli ATX güç kaynağını kullanmak için,

12 24

20-Pinli ATX Güç Kaynağını Takma 1 13

ATX 12V Güç Konektörü

8 5

(8-pinli ATX12V1)

(bkz. s.2 No. 1)

Lütfen bir ATX 12V güç kaynağını bu konektöre bağlayın.

Bu anakart 8-pinli ATX 12V güç konektörü sağlasa da geleneksel bir

4-pinli ATX 12V güç kaynağı bağlarsanız da çalışabilir. 4-pinli ATX güç

kaynağını kullanmak için, lütfen güç kaynağınızı Pin 1 ve Pin 5'le birlikte

takın.

8 5

4-Pinli ATX 12V Güç Kaynağını Takma

4 1

SLI/XFIRE Güç Konektörü

(4-pinli SLI/XFIRE_PWR1)

(bkz. s.2 No. 43)

Lütfen bir SLI/XFIRE güç kaynağını bu konektöre bağlayın.

145


IEEE 1394 Fişi

(9-pinli FRONT_1394)

(bkz. s.2 No. 31)

RXTPAM_0

GND

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

Seri port Fişi

(9-pinli COM1)

(bkz. s.2 No. 33)

Bu anakartta G/Ç panelindeki

(FRONT_1394) de bulunur. Bu

Bu COM1 fi şi bir seri port

HDMI_SPDIF Fişi

(2-pinli HDMI_SPDIF1) 1

GND

(bkz. s.2 No. 34)

çıkışını HDMI VGA kartına sağlar, sistemin HDMI Dijital bağlamasına izin verir. Lütfen

HDMI VGA kartının

HDMI_SPDIF konektörünü bu fi şe bağlayın.

146


1.5 Akıllı Anahtarlar

Bu anakartta üç akıllı anahtar bulunur: güç anahtarı, sıfırlama anahtarı ve CMOS'u temizleme anahtarı; bunlar kullanıcıların hızlı bir şekilde sistemi açıp kapatmalarını veya CMOS değerlerini temizlemelerini sağlar.

Güç Anahtarı

(PWRBTN)

(bkz. s.2 No.18) hızlı bir şekilde sistemi açıp kapatmalarını sağlayan akıllı

Sıfırlama Anahtarı Sıfırlama Anahtarı,

(RSTBTN) kullanıcıların hızlı bir şekilde

(bkz. s.2 No.17) sağlayan akıllı bir anahtardır.

(CLRSBTN)

(bkz. s.3 No.17) kullanıcıların hızlı bir şekilde


147

2. BIOS Bilgileri

Anakarttaki Flash Bellek BIOS Ayarları Yardımcı Programını içerir. Bilgisayarı başlattığınızda, lütfen Otomatik Güç Sınaması (POST) sırasında BIOS Ayarları yardımcı programına girmek için <F2> veya <Del> tuşuna basın; aksi halde, POST test rutinlerine devam eder. BIOS Ayarlarına POST'tan sonra girmek istiyorsanız, lütfen <Ctl> + <Alt> + <Delete> tuşlarına basarak veya sistem kasasındaki sıfırlama düğmesine basarak sistemi yeniden başlatın. BIOS Ayarları programı kullanıcı dostu olacak şekilde tasarlanmıştır. Çeşitli alt menüler arasında dolaşmanıza ve

önceden belirlenen seçenekler arasından seçim yapmanıza izin veren menü tabanlı bir programdır. BIOS Ayarları hakkında ayrıntılı bilgi için, lütfen Destek CD'sinde bulunan Kullanıcı Kılavuzu'na (PDF dosyası) başvurun.

3. Yazılım Destek CD’si bilgileri

Bu anakart çeşitli Microsoft ® Windows ® işletim sistemleri destekler: 7 / 7 64-bit

/ Vista TM / Vista TM 64-bit / XP / XP 64-bit. Anakartla birlikte gelen Destek CD'si anakart özelliklerini genişleten gerekli sürücüleri ve kullanışlı yardımcı programları içerir. Destek CD'sini kullanmaya başlamak için, CD'yi CDROM sürücünüze takın.

Bilgisayarınızda "OTOMATİK KULLAN" özelliği etkinleştirilmişse, Ana Menüyü otomatik olarak görüntüler. Ana Menü otomatik olarak görüntülenmezse, menüleri görüntülemek için Destek CD'sinin “BIN” klasöründeki "ASSETUP.EXE" dosyasını bulun ve çift tıklatın.

148


1. 제품소개

ASRock 의 Z77 WS 메인 보드를 구매하여 주신것에 대하여 감사 드립니다 . 이 메인

보드는 엄격한 품질관리 하에 생산되어진 신뢰성 있는 메인보드 입니다 . 이 제품은

고 품격 디자인과 함께 ASRock 의 우수한 품질과 최고의 안정성을 자랑하고 있습니

다 . 이 빠른 설치 안내서에는 마더보드에 대한 설명과 단계별 설치 방법이 실려 있습

니다 . 마더보드에 대한 보다 자세한 내용은 지원 CD 의 사용 설명서에서 확인할 수

있습니다 .

메인보드의 사양이나 바이오스가 업 데이트 되기 때문에 이 사용자설

명서의 내용은 예고 없이 변경되거나 바뀔 수가 있습니다 . 만을 생각

해서 이 사용자 설명서의 어떤 변경이 있으면 ASRock 의 웹 사이트

에서 언제든지 업 데이트를 하실 수 있습니다 . 웹사이트에서 최신

VGA 카드와 CPU 지원 목록을 확인할 수 있습니다 . ASRock 의 웹사이

트 주소는 http://www.asrock.com 입니다 .

본 머더보드와 관련하여 기술 지원이 필요한 경우 당사 웹 사이트를 방문하여

사용 중인 모델에 대한 특정 정보를 얻으십시오 .


1.1 패키지 내용

ASRock Z77 WS 마더보드

(ATX 폼 팩터 : 12.0” x 9.6”, 30.5 x 24.4 cm)

ASRock Z77 WS 퀵 설치 가이드

ASRock Z77 WS 지원 CD

시리얼 ATA (SATA) 데이터 케이블 6 개 ( 선택 사양 )

시리얼 ATA (SATA) HDD 전원 케이블 1 개 ( 선택 사양 )

I/O 차폐 1 개

ASRock SLI_ 브릿지 카드 2 개

ASRock SLI_ 브릿지 _3S 카드 1 개

ASRock 3-Way SLI Bridge 카드 1 개

Windows

®

7 / 7 64-비트 / Vista

TM

/ Vista

TM

64-비트의 성능을 향상시키기

위해서 Storage Configuration(스토리지 구성)에서 BIOS 옵션을 AHCI

모드로 설정하는 것이 좋습니다. BIOS 설정과 관련하여 자세한 내용은 지

원 CD에 포함된 “사용 설명서”를 참조하십시오.

149


1.2 설명서

150

확장 슬롯

온보드 VGA

플랫폼

CPU

칩셋

메모리

- ATX 폼 팩터 : 12.0” x 9.6”, 30.5 x 24.4 cm

- 프리미엄 골드 콘덴서디자인 (100% 일본산 고품질 정도성 고분

자 콘덴서 )

- LGA1155 패키지에서 3 세대 및 2 세대 Intel ® Core

TM

i7 / i5 /

i3 을 지원합니다

- Digi 전원 설계

- 8 + 4 전원 위상 디자인

- Intel ® Turbo Boost 2.0 기술 지원

- K- 시리즈 잠금 해제 CPU 지원

- Intel ® Z77

- Intel ® Rapid Start 기술과 Smart Connect 기술을 지원합니다

- 듀얼 채널 메모리 기술 지원

- DDR3 DIMM 슬롯 4 개

- DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)/1600/1333/

1066 비 -ECC, 언버퍼드 메모리를 지원

- 최대 시스템 메모리 용량 : 32GB

- Intel ® 익스트림 메모리 프로파일 (XMP)1.3/1.2 지원

- 5 개의 PCI Express 3.0 x16 슬롯 (PCIE2: x16 모드 또는

PCIE1/PCIE3/PCIE5/PCIE7: x16/0/16/0 모드 또는 x8/8/8/8

모드 )

* PCIE 3.0 은 Intel ® Ivy Bridge CPU 에서만 지원됩니다 .

Intel ® Sandy Bridge CPU 는 PCIE 2.0 만 지원합니다 .

- 1 개의 PCI Express 2.0 x16 슬롯 (PCIE4: x4 모드 )

- 1 개의 PCI Express 2.0 x1 슬롯

- AMD Quad CrossFireX

TM

, 4 웨이 CrossFireX

TM

, 3 웨이

CrossFireX

TM

및 CrossFireX

TM

지원

- NVIDIA ® Quad SLI

TM

, 4 웨이 SLI

TM

, 3 웨이 SLI

TM

및 SLI

TM

지원

* Intel ® HD Graphics 내장 비주얼 및 VGA 출력은 GPU 통합된

프로세서의 경우에만 지원됩니다 .

- Intel ® HD 그래픽 내장 비주얼 프로그램 : Intel ® Quick Sync

Video 2.0, Intel ® InTru

TM

3D, Intel ® Clear Video HD

Technology, Intel ® Insider

TM

, Intel ® HD Graphics 2500/4000

- Intel ® Ivy Bridge CPU 를 탑재한 DirectX 11, Pixel Shader 5.0.

Intel ® Sandy Bridge CPU 를 탑재한 DirectX 10.1, Pixel

Shader 4.1

- 최대 공유 메모리 1760MB

- 최대 해상도 1920x1200 @ 60Hz 까지 HDMI 1.4a 지원

- 자동 립 싱크 (Auto Lip Sync), 딥 컬러 (Deep Color)(12bpc),


후면판 I/O

저장

오디오

랜

USB 3.0

xvYCC, HBR( 고비트율 오디오 ), HDMI 지원

(HDMI 호환 모니터 필요 )

- HDMI 포트를 이용한 HDCP 기능 지원

- HDMI 포트를 이용한 1080p Blu-ray (BD) / HD-DVD 재생을

지원

- 7.1 CH HD Audio 목록 보호 (Realtek ALC898 Audio Codec)

- Premium Blu-ray 오디오 지원


- Broadcom BCM57781

- 웨이크 - 온 - 랜 지원

- 절전형 이더넷 802.3az 지원

- 의 팀 기능 듀얼 LAN 지원

- PXE 지원

- Intel ® Z77 SATA3 6.0Gb/s 커넥터 2 개 , 하드웨어 RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage 및

Intel Smart Response 기술 ), NCQ, AHCI 및 “Hot Plug” ( 핫플

러그 ) 기능 지원

- ASMedia ASM1061 SATA3 6.0Gb/s 커넥터 4 개 , 하드웨어

NCQ, AHCI 및 “Hot Plug” ( 핫플러그 ) 기능 지원

(SATA3_A4 커넥터는 eSATA3 포트와공유됨 )

- Intel ® Z77 SATA2 3.0Gb/s 커넥터 4 개 , 하드웨어 RAID

(RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage 및

Intel Smart Response 기술 ), NCQ, AHCI 및 “Hot Plug” ( 핫플

러그 ) 기능 지원

I/O Panel

- 1 개 PS/2 키보드 / 마우스 포트

- 1 개의 HDMI

- 1 개광학 SPDIF 출력 포트

- 2 개디폴트 USB 2.0 포트

- 1 개 eSATA3 커넥터

- 8 개디폴트 USB 3.0 포트

- 2 개 LED(ACT/LINK LED 및 SPEED LED) 가 있는 RJ-45

LAN 포트

- 1 개 IEEE 1394 포트

- 1 개 LED 가 달린 CMOS 삭제 스위치

- 오디오 잭 : 후방 스피커 / 중앙 / 저음 / 라인 인 / 전방 스피커 /

마이크

- Intel ® Z77 에 의한 후면 패널 USB 3.0 포트 4 개 , 최고

5Gb/s 의 USB 1.0/2.0/3.0 지원

- Etron EJ188 에 의한 후면 패널 USB 3.0 포트 4 개 , 최고

5Gb/s 의 USB 1.0/2.0/3.0 지원

151


152

BIOS

지원 CD

온보드 헤더

및 커넥터

- Etron EJ188 에 의한 전면 패널 USB 3.0 헤더 2 개 (USB

3.0 포트 4 개 지원 ), 최고 5Gb/s 의 USB 1.0/2.0/3.0 지원

- 적외선 모듈 헤더 1 개

- 소비자용 적외선 모듈 헤더 1 개

- COM 포트 헤더 1 개

- HDMI_SPDIF 헤더 1 개

- IEEE 1394 헤더 1 개

- 전원 LED 헤더 1 개

- CPU 팬 커넥터 2 개 (4 핀 1 개 , 3 핀 1 개 )

- 섀시 팬 커넥터 3 개 (4 핀 1 개 , 3 핀 2 개 )

- 전원 팬 커넥터 1 개 (3 핀 )

- 24 핀 ATX 전원 헤더

- 8 핀 ATX 12V 파워 콘넥터

- SLI/XFIRE 전원 헤더

- 전면부 오디오 콘넥터

- USB 2.0 헤더 3 개 (6 개의 추가 USB 2.0 포트를 지원하는헤더

2 개 )

- USB 3.0 헤더 2 개 (4 개의 추가 USB 3.0 포트를 지원하는헤더

2 개 )

- Dr. Debug (7 세그먼트 디버그 LED) 1 개

- LED 가 달린 전원 스위치 1 개

- LED 가 달린 리셋 스위치 1 개

- LED 가 달린 CMOS 삭제 스위치 1 개

- 64Mb GUI 지원을 제공하는 AMI UEFI 적합형 BIOS

- “플러그 앤 플레이” 지원

- ACPI 1.1 웨이크 - 업 이벤트와의 호환

- 점퍼 프리 지원

- SMBIOS 2.3.1 지원

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA 전압 멀

티 조절

- 드라이버 , 유틸리티 , 백신 소프트웨어 ( 시험판 ), CyberLink

MediaEspresso 6.5 평가판 , ASRock MAGIX Multimedia

Suite - OEM

하드웨어 모니터 - CPU 온도 감지

- 마더보드 온도 감지

- CPU/ 섀시 / 전원 팬 회전 속도계 : 샤시 ( 케이스 ) 팬 회전

속도계

- CPU/ 섀시 저소음 팬 (CPU 온도에 의한 섀시 팬속도 자동 조정

가능 )

- CPU/ 섀시 팬 멀티스피드 컨트롤

- 전압 감시 기능 : +12V,+5V,+3.3V,Vcore


OS - 마이크로 소프트 Windows ® 7/7 64 비트 /Vista

TM

/Vista

인증서

비트 / XP/XP 64 비트 와 호환

- FCC, CE, WHQL

- ErP/EuP 지원 (ErP/EuP 지원 전원 공급기가 요구됨 )

* 상세한 제품정보는 당사의 웹사이트를 방문할수있습니다 . http://www.asrock.com

TM

64

1.3 점퍼 셋팅

그림은 점퍼를 어떻게 셋업 하는지를 보여줍니다 .

점퍼 캡이 핀 위에 있을 때 , 점퍼는 “ 쇼트 ” 입니다 .

점퍼 캡이 핀 위에 없을 때 점퍼는 “ 오픈 ” 입니다 .

그림은 3 개의 핀 중 1-2 번 핀이 “ 쇼트 ” 임을

보여주는 것이며 , 점퍼 캡이 이 두 핀 위에 있음을

보여주는 것입니다 .

점퍼

CMOS 초기화

(CLRCMOS1, 3 핀 점퍼 )

(2 페이지 , 22 번 항목 참조 )

세팅

기본 설정 CMOS 삭제

참고 : CLRCMOS1 을 사용하여 CMOS 에 들어 있는 데이터를 삭제할 수 있습니다 .

시스템 매개변수를 삭제하고 기본 설정으로 복원하려면 , 컴퓨터를 끄고 전원

공급장치에서 플러그를 뽑으십시오 . 15 초를 기다린 다음 점퍼 캡을 사용하여

CLRCMOS1 의 핀 2 와 핀 3 을 5 초 동안 단락하십시오 . 그러나 BIOS 업데이트

직후에는 CMOS 를 삭제하지 마십시오 . BIOS 를 업데이트하자마자 CMOS 를

삭제해야 하는 경우 먼저 시스템을 부팅하고 CMOS 를 종료하고 삭제 작업을 해

야 합니다 . CMOS 배터리를 제거할 경우에만 암호 , 날짜 , 시간 , 사용자 기본 프

로파일 , 1394 GUID, MAC 주소가 삭제됩니다 .

Clear CMOS Switch는 Clear CMOS 점퍼와 동일한 기능을 갖고

있습니다.


153

1.4 온보드 헤더 및 커넥터

주의 !

이 콘넥터는 점퍼가 아닙니다 . 이 콘넥터 위에 점퍼 캡을 사용하지

마세요 . 커넥터에 점퍼 캡을 설치하면 마더보드가 영구적으로 손상됩니

다 !

시리얼 ATA2 커넥터

(SATA2_2_3:

2 페이지 , 15 번 항목 참조 )

(SATA2_4_5:


4 개의 시리얼 ATA2 (SATA)

커넥터는 내부 저장 장치용

SATA 데이터 케이블을 지원합

니다 . 커넥터가 내부 기억 장치

용 SATA 케이블을지원합니다 .

현재의 SATA2 인터페이스는

최고 3.0 Gb/s 의 데이터 전송 속

도를 지원합니다 .

시리얼 ATA3 커넥터

(SATA3_A1_A2:


(SATA3_A3_A4:


(SATA3_0_1:


6 개의 시리얼 ATA3 (SATA3)

커넥터는 내부 저장 장치용

SATA 데이터 케이블을지원합

니다 . 커넥터가 내부 기억 장치

용 SATA 케이블을 지원합니

다 . 현재의 SATA3 인터페이스

는 최고 6.0 Gb/s 의 데이터 전송

속도를 지원합니다 . 뒷면 I/O 에

있는 eSATA3 포트 에 HDD 를

설치할 경우 내부 SATA3_A4

는 작동하지 않습니다 .

시리얼 ATA(SATA)

데이터 케이블

( 선택 사양 )

SATA 데이터 케이블의 임의적

인 측을 마더보드의 SATA /

SATA2 / SATA3 하드 디스크

혹은 SATA2 / SATA3 커넥터

에 연결합니다 .

154

시리얼 ATA(SATA)

전원 케이블

( 선택 사양 )

SATA HDD 전원

커넥터에 연결

전원 공급장치에

연결

SATA 전원 케이블의 검은 색끝

부분을 드라이브의 전원 커넥터

에 연결하십시오 . 그 다음에

SATA 전원 케이블의 흰색 끝을

전원 공급장치의 전원 커넥터에

연결합니다 .


USB 2.0 헤더

(9 핀 USB2_3)

(2 페이지 , 25 번 항목 참조 )

(9 핀 USB4_5)

(2 페이지 , 26 번 항목 참조 )

USB_PWR

P-3

P+3

1

P-2

USB_PWR

(9 핀 USB6_7)

(2 페이지 , 27 번 항목 참조 )

본 머더보드에는 I/O 패널에 있

는 2 개의 기본 USB 2.0 포트외

에도 USB 2.0 헤더가 3 개 있습

니다 . 각각의 USB 2.0 헤더는 2

개의 USB 2.0 포트를 지원할 수

있습니다 .

USB 3.0 헤더

(19 핀 USB3_9_10)

(2 페이지 , 10 번 항목 참조 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(19 핀 USB3_11_12)

(2 페이지 , 9 번 항목 참조 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

적외선 모듈 헤더

(5 핀 IR1)

(2 페이지 , 32 번 항목 참조 )

IRTX

+5VSB

DUMMY

1

IRRX

GND

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

I/O 패널에 있는 8 개의 기본적

USB 3.0 포트 이외에도 마더보

드에 2 개의 USB 3.0 헤더가 있

습니다 . 이 USB 3.0 헤더는 2 개

의 USB 3.0 포트를 지원할 수 있

습니다 .

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

이 헤더는 선택품목인 무선 적외

선 송수신 모듈을 지원합니다 .

소비자용 적외선 모듈 헤더

(4 핀 CIR1)

(2 페이지 , 28 번 항목 참조 )

이 헤더는 리모콘 수신기

연결하는 데 사용될

수 있습니다 .

155


1.

2.

전면부 오디오 콘넥터

(9 핀 HD_AUDIO1)

(2 페이지 , 35 번 항목 참조 )

GND

PRESENCE#

MIC_RET

OUT_RET

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

이 콘넥터는 오디오 장치를 하게

조절하고 연결할 수 있는 전면

오디오 인터페이스 입니다 .

E.

B.

C.

D.

High Definition Audio( 고음질 오디오 ) 는 잭 센스 기능을 지원하나 , 제

대로작동하려 면 섀시의 패널 와이어가 HAD 를 지원해야 합니다 . 이 설

명서 및 섀시 설명서의지침 을 따라 시스템을 설치하십시오 .

AC’97 오디오 패널을 사용하는 경우 , 이를 아래와 같이 프런트 패널의

오디오헤 더에 설치하십시 오 .

A. Mic_IN (MIC) 을 MIC2_L 에 연결합니다 .

Audio_R (RIN) 을 OUT2_R 에 연결하고 , Audio_L (LIN) 을

OUT2_L 에 연결합 니다 .

Ground (GND) 을 Ground (GND) 에 연결합니다 .

MIC_RET 및 OUT_RET 는 HD 오디오 패널 전용입니다 .

이들을 AC’97 오디오 패널에 연결 하지 않아도 됩니다 .

앞면 마이크 작동 .

Windows

®

XP / XP 64 비트 OS 의 경우 :

“Mixer” ( 믹서 ) 와 “Recorder” ( 리코더 ) 를 선택한 후 “Front

Mic ” ( 앞면 마이크 ) 를 선택합니다 .

Windows

®

7 / 7 64 비트 / Vista TM / Vista TM 64 비트 OS 의 경

우 :

Realtek 제어판에서 “FrontMic” ( 앞면 마이크 ) 로 가서

“Recording Volume” ( 리코딩 볼륨 ) 을 조정합니다 .

시스템 콘넥터

(9 핀 PANEL1)

(2 페이지 , 20 번 항목 참조 )

이 콘넥터는 시스템 전면 패널기

능을 지원하기 위한 것입니다 .

156

섀시의 전원 스위치 , 리셋 스위치 , 시스템 상태 표시등을 아래의 핀 할당

에 따라 이헤더에 연결합니다 . 케이블을 연결하기 전에 양극 핀과 음극 핀

을 기록합니다 .

PWRBTN( 전원 스위치 ):

섀시 전면 패널의 전원 스위치에 연결합니다 . 전원 스위치를 이용해 시스

템을 끄는방법을 구성할 수 있습니다 .

RESET( 리셋 스위치 ):

섀시 전면 패널의 리셋 스위치에 연결합니다 . 컴퓨터가 정지하고 정상적

재시작을수행하지 못할 경우 리셋 스위치를 눌러 컴퓨터를 재시작합니

다 .


새시 스피커 헤더

(4 핀 SPEAKER 1)

(2 페이지 , 21 번 항목 참조 )

전원 LED 헤더

(3 핀 PLED1)

(2 페이지 , 19 번 항목 참조 )

섀시 / 전원 팬 커넥터

(4 핀 CHA_FAN1)

(2 페이지 , 30 번 항목 참조 )

(3 핀 CHA_FAN2)

(2 페이지 , 29 번 항목 참조 )

(3 핀 CHA_FAN3)

(2 페이지 , 44 번 항목 참조 )

(3 핀 PWR_FAN1)


PLED( 시스템 전원 LED):

섀시 전면 패널의 전원 상태 표시등에 연결합니다 . 시스템이 작동하고 있

을 때는 LED 가 켜져 있습니다 . 시스템이 S1/S3 대기 상태에 있을 때는

LED 가 계속 깜박입니다 . 시스템이 S4 대기 상태 또는 전원 꺼짐 (S5) 상

태에 있을 때는 LED 가 꺼져 있습니다 .

HDLED( 하드 드라이브 동작 LED):

섀시 전면 패널의 하드 드라이브 동작 LED 에 연결합니다 . 하드 드라이

브가 데이터를 읽거나 쓰고 있을 때 LED 가 켜져 있습니다 .

전면 패널 디자인은 섀시별로 다를 수 있습니다 . 전면 패널 모듈은 주로

전원 스위치 , 리셋 스위치 , 전원 LED, 하드 드라이브 동작 LED, 스피커

등으로 구성되어 있습니다 . 섀시 전면 패널 모듈을 이 헤더에 연결할 때

와이어 할당과 핀 할당이 정확히 일치하는지 확인합니다 .

새시 스피커를 이 헤더에 연결하

십시오 .

1

PLED-

PLED+

PLED+

시스템 전원 상태를 표시하려면

섀시 전원 LED 를 헤더에 연결

하십시오 . 시스템 작동 중에는

LED 에 전원이 켜져 있습니다 .

S1/S3 상태에서는 LED 가 계속

깜박입니다 . S3/S4 상태 또는

S5 상태에서는 LED 가 꺼집니

다 ( 전원 꺼짐 ).

팬 케이블을 팬 커넥터에 연결하

고 접지 핀에는 검은색 전선을

연결하십시오 . CHA_FAN1,

CHA_FAN2 및 CHA_FAN3 은

팬 제어를 지원합니다 .

CPU 팬 커넥터

(4 핀 CPU_FAN1)


4 3 2 1 CPU 팬 케이블을 이 커넥터에

연결하고 흑색 선을 접지 핀에맞

추십시오 .

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL


157

(3 핀 CPU_FAN2)


본 머더보드가 4 핀 CPU 팬 ( 저소음 팬 ) 지원을 제공하기는 하지만 팬 속

도 제어기능없이도 3 핀 CPU 팬을 성공적으로 작동할 수 있습니다 . 본 머

더보드의 CPU 팬 커넥터에 3 핀 CPU 팬을 연결하려면 1-3 번 핀에 연결

하십시오 .

1-3 번 핀에 연결됨

3 핀 팬 설치

ATX 전원 헤더

(24 핀 ATXPWR1)


12 24

ATX 전원 공급기를 이 헤더에

연결하십시오 .

1 13

이 마더보드는 24 핀 ATX 전원 커넥터를 제공하지만 ,

종래의 20 핀 ATX 전원 공급장치를 사용해도 작동이

가능합니다 . 20 핀 ATX 전원 공급장치를 사용하려면 ,

Pin 1 과 Pin 13 으로 전원공급장치를 연결하십시오 .

12 24

20 핀 ATX 전원 공급장치 설치

1 13

ATX 12V 파워 콘넥터

(8 핀 ATX12V1)


8 5

4 1

ATX 12V 플러그가 달린 전원

공급장치를 이 커넥터에연결해

야 충분한 전력을 공급할 수 있

습니다 . 그러지 않을 경우 전원

을 켤 수 없습니다 .

비록 본 마더보드는 8- 핀 ATX 12V 전원 연결기를 제공하지만 이것은 여

전히작업할수있습니다 . 만약 전통적인 4- 핀 ATX 12V 전원공급을 채용

하여 4- 핀 ATX 전력을 사용하는경우 , 반드시 전원 공급을 핀 1 과 핀 5

에전원공급을 삽입해야합니다 .

8 5

4- 핀 ATX 12V 전원공급장치

4 1

158

SLI/XFIRE 전원 커넥터

(4 핀 SLI/XFIRE_POWER1)

(2 페이지 , 43 번 항목 참조 ) SLI/XFIRE_POWER1

이 커넥터를 사용하지 않아도 되

나 , 2 개의그래픽카드를 이 마더

보드에 동시에연결하는 경우에

는이커넥터를 하드 디스크 전원

커넥터에 연결하십시오 .


IEEE 1394 헤더

(9 핀 FRONT_1394)

(2 페이지 , 31 번 항목 참조 )

시리얼포트 컨넥터

(9 핀 COM1)

(2 페이지 , 33 번 항목 참조 )

RXTPAM_0

GND

RXTPBM_0

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

이본 머더보드에는 I/O 패널에

있는 1 개의 기본 IEEE 1394 포

트외에도 IEEE 1394

(FRONT_1394) 헤더가 1 개 있

습니다 . 각각의 IEEE 1394 헤

더는 1 개의 IEEE 1394 포트를

지원할 수 있습니다 .

이 콘넥터는 시리얼 포트 모듈을

지원합니다 .

HDMI_SPDIF 헤더

(2 핀 HDMI_SPDIF1)

(2 페이지 , 34 번 항목 참조 )

1

GND

SPDIFOUT

HDMI VGA 카드에 SPDIF 오

디오 출력을 제공하는

HDMI_SPDIF 헤더는 시스템이

HDMI 디지털 TV/ 프로젝터 /

LCD 장치에 연결할 수 있게 합

니다 . HDMI VGA 카드의

HDMI_SPDIF 커넥터를 이 헤

더에 연결하십시오 .


159

1.5 빠른 스위치

이 메인보드에는 세 개의 빠른 스위치 , 즉 전원 스위치 , 리셋 스위치 및 CMOS 삭제

스위치가 있어 , 사용자가 빠르게 시스템을 켜고 끄거나 리셋하고 CMOS 값을 삭제

할 수 있습니다 .

전원 스위치

(PWRBTN)

(2 페이지 , 18 번 항목 참조 )

전원 스위치는 빠른 스위치로서 ,

사용자가 시스템을 빠르게 켜거

나 끌 수 있습니다 .

리셋 스위치

(RSTBTN)

(2 페이지 , 17 번 항목 참조 )

리셋 스위치는 빠른 스위치로서 ,

사용자가 시스템을 빠르게 리셋

할 수 있습니다 .

CMOS 삭제 스위치

(CLRCBTN)

(3 페이지 , 17 번 항목 참조 )

CMOS 삭제 스위치는 빠른 스위

치로서 , 사용자가 CMOS 값을

빠르게 삭제할 수 있습니다 .

160


2. 시스템 바이오스 정보

메인보드의 플래쉬 메모리에는 바이오스 셋업 유틸리티가 저장되어 있습니다 . 컴퓨

터를 사용하실 때 , “자가진단 테스트”(POST) 가 실시되는 동안 <F2> 또는 <Del>

키를 눌러 바이오스 셋업으로 들어가세요 ; 만일 그렇게 하지 않으면 POST 는 테스

트 루틴을 계속하여 실행할 것입니다 . 만일 POST 이후 바이오스 셋업을 하기 원하

신다면 ,<Ctl>+<Alt>+<Delete> 키를 누르거나 , 또는 시스템 본체의 리셋 버튼을

눌러 시스템을 재 시작하여 주시기 바랍니다 . 바이오스 셋업 프로그램은 사용하기 편

하도록 디자인되어 있습니다 . 각 항목은 다양한 서브 메뉴 표가 올라오며 미리 정해

진 값 중에서 선택할 수 있도록 되어 있습니다 . 바이오스 셋업에 대한 보다 상세한 정

보를 원하신다면 보조 CD 안의 포함된 사용자 매뉴얼 (PDF 파일 ) 을 따라 주시기 바

랍니다 .

3. 소프트웨어 지원 CD 정보

이 메인보드는 여러 가지 마이크로소프트 윈도우 운영 체계를 지원합니다 :

7/7 64 비트 /Vista TM /Vista TM 64 비트 /XP/XP 64 비트 . 메인보드에 필요한 드라이버

와 사용자 편의를 위해 제공되는 보조 CD 는 메인보드 의 기능을 향상시켜 줄 것입니

다 . 보조 CD 를 사용하여 시작하시려면 , CD-ROM 드라이브에 CD 를 넣어주시기 바

랍니다 . 만일 고객님의 컴퓨터가 “AUTORUN” 이 가능하다면 자동으로 메인 메

뉴를 모니터에 디스플레이 시켜 줄 것입니다 . 만일 자동으로 메인 메뉴가 나타나지

않는다면 , 보조 CD 의 디스플레이 메뉴 안에 있는 BIN 폴더 ASSETUP.EXE 파일을

더블 클릭하여 주시기 바랍니다 .

(D: \ BIN \ ASSETUP.EXE, D: 는 CD-ROM 드라이브 )


161

162

１．はじめに

ASRock Z77 WS マザーボードをお買い上げいただきありがとうございます。本製品は、

弊社の厳しい品質管理の下で製作されたマザーボードです。本製品は、弊社の品質と耐

久性の両立という目標に適合した堅牢な設計により優れた性能を実現します。このクイッ

クインストレーションガイドには、マザーボードの説明および段階的に説明したインストレー

ションの手引きが含まれています。マザーボードに関するさらに詳しい情報は、「サポート

CD」のユーザーマニュアルを参照してください。

マザーボードの仕様および BIOS ソフトウェアは、アップデートされる

ことが有りますので、マニュアルの内容は、予告なしに変更されること

があります。本マニュアルに変更が有った場合は、弊社のウェブサイト

に通告なしに最新版のマニュアルが掲載されます。最新の VGA カード

および CPU サポートリストもウェブサイトでご覧になれます。ASRock

社ウェブサイト：http://www.asrock.com

このマザーボードに関連する技術サポートが必要な場合、当社の Web

サイトにアクセスし、使用しているモデルについての特定情報を見つけ

てください。 www.asrock.com/support/index.asp

1.1 パッケージ内容

ASRock Z77 WS マザーボード：

(ATX フォームファクター : 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

ASRock Z77 WS クイックインストレーションガイド

ASRock Z77 WS サポート CD

6 x シリアル ATA (SATA) データケーブル（オプション）

1 x シリアル l ATA (SATA) HDD 用電源変換ケーブル（オプション）

1 x I/O パネルシールド

2 x ASRock SLI_Bridge カード

1 x ASRock SLI_Bridge_3S カード

1 x ASRock 3-Way SLI Bridge カード

Windows

®

7 / 7 64-bit / Vista TM / Vista TM 64-bit でより良い性能を

得るには、ストレージ構成のBIOSオプションをAHCIモードに設定することを推

奨します。 B I O Sのセットアップについての詳細は、サポートC Dの「ユーザーマ

ニュアル」を参照してください。


1.2 仕様

拡張スロット

プラットフ

ォーム

CPU

ヱップセット

メモリー

グラフィック

- ATX フォームファクター :

12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- プレミアムゴールド固体コンデンサ設計 ( 日本製高品質 100% 導

電性高分子コンデンサ )

- LGA1155 パッケージで、第三世代および第二世代 Intel ®

Core TM i7 / i5 / i3 をサポートします

- デジタル電源設計

- 8 + 4 電源位相設計

- Intel ® Turbo 2.0 ブーストテクノロジをサポート

- K シリーズのアンロック CPU

- Intel ® Z77

- Intel ® Rapid Start テクノロジおよび Smart Connect テク

ノロジをサポートします

- デュアルチャネル DDR3 メモリ技術

- DDR3 DIMM スロット x 4

- DDR3 3000+(OC)/2400(OC)/2133(OC)/1866(OC)/1600/

1333/1066 non-ECC, un-buffered メモリーに対応

- システムメモリの最大容量 : 32GB

- Intel ® Extreme Memory Profile (XMP)1.3/1.2 をサポー

ト

- 5 x PCI Express 3.0 x16 スロット (PCIE2: x16 モードま

たは PCIE1/PCIE3/PCIE5/PCIE7: x16/0/16/0 モードまた

は x8/8/8/8 モード )

* PCIE 3.0 は、Intel ® Ivy Bridge CPU でのみサポートされ

ます。 Intel ® Sandy Bridge CPU では、PCIE 2.0 のみを

サポートします。

- 1 x PCI Express 2.0 x16 スロット (PCIE4: x4 モード )

- 1 x PCI Express 2.0 x1 スロット

- AMD Quad CrossFireX TM 、4-Way CrossFireX TM 、3-Way

CrossFireX TM および CrossFireX TM をサポート

- NVIDIA ® Quad SLI TM 、4-Way SLI TM 、3-Way SLI TM および

SLI TM をサポート

* Intel ® HD Graphics Built-in Visuals および VGA 出力

に対応するのは、GPU が内蔵されているプロセッサを使用する

場合だけです。

- Intel ® HD グラフィックス内蔵ビジュアルのサポート :Intel ®

Quick Sync Video 2.0、Intel ® InTru TM 3D、Intel ® Clear

Video HD Technology、Intel ® Insider TM 、Intel ® HD

Graphics 2500/4000

163


164

I/O

ストレージ

リアパネル

オーディオ

LAN

- Intel ® Ivy Bridge CPU を搭載した DirectX 11、Pixel

Shader 5.0。Intel ® Sandy Bridge CPU を搭載した

DirectX 10.1、Pixel Shader 4.1。

- 最大の共有メモリ 1760MB

- 1920x1200 @ 60Hz の最大解像度で HDMI 1.4a をサポート

- オート・リップシンク、ディープカラー（12bpc）、xvYCC、HBR（High

Bit Rate）オーディオ、HDMI （HDMI 準拠モニタが必要）をサポ

ート

- HDCP 機能、HDMI ポートをサポート

- 1080p Blu-ray (BD) / HD-DVD 再生サポート、HDMI ポート

をサポート

- 7.1 CH HD オーディオ ( コンテンツ保護付 )

(Realtek ALC898 オーディオ Codec)

- Premium Blu-ray オーディオのサポー


- Broadcom BCM57781

- Wake-On-LAN をサポート

- Energy Efficient Ethernet 802.3az をサポート

- チーミング機能によるデュアル LAN をサポートします

- PXE をサポート

- Intel ® Z77 SATA3 6.0Gb/ 秒コネクタ x 2 ハードウェア

RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid

Storage および Intel Smart Response 技術 ) をサポート ,

NCQ, AHCI および “Hot Plug” ( ホットプラグ ) 機能

- ASMedia ASM1061 SATA3 6.0Gb/ 秒コネクタ x 4 ハード

ウェアをサポート , NCQ, AHCI および “Hot Plug” ( ホットプラグ )

機能 (SATA3_A4 コネクタは eSATA3 ポートと共有 )

- Intel ® Z77 SATA2 3.0Gb/ 秒コネクタ x 4 ハードウェア


Storage および Intel Smart Response 技術 ) をサポート ,

NCQ, AHCI および “Hot Plug” ( ホットプラグ ) 機能

I/O Panel

- PS/2 キーボード / マウスポート x 1

- HDMI ポート x 1

- 光学 SPDIF 出力ポート x 1

- Ready-to-Use USB 2.0 ポート x 2

- eSATA3 コネクタ x 1

- Ready-to-Use USB 3.0 ポート x 8

- LED（ACT/LINK LED および SPEED LED）付き RJ-45 LAN

ポート x 2

- IEEE 1394 ポート x 1

- クリア CMOS スイッヱ（LED 付き）x 1


USB 3.0

- オーディオジャック：後部スピーカー、中央、低音、入力、前部スピー

カー、マイク入力

- 4 x リア USB 3.0 ポート (Intel ® Z77)、USB 1.0/2.0/3.0 に

最高 5Gb/s まで対応

- 4 x リア USB 3.0 ポート (Etron EJ188)、USB 1.0/2.0/3.0

に最高 5Gb/s まで対応

- 2 x フロント USB 3.0 ヘッダ (USB 3.0 ポート 4 基対応 )

コネクター

(Etron EJ188)、USB 1.0/2.0/3.0 に最高 5Gb/s まで対応

- IR ヘッダー x 1

- コンシューマー赤外線モジュールヘッダー x 1

- COM ポートヘッダ x 1

- HDMI_SPDIF ヘッダー x 1

- IEEE 1394 ヘッダー x 1

- 電源 LED ヘッダー　x 1

- CPU ファンコネクタ x 2 (4 ピン x 1、3 ピン x 1)

- シャーシファンコネクタ x 3 (4 ピン x 1、3 ピン x 2)

- 電源ファンコネクタ x 1 (3 ピン )

- 24 ピン ATX 電源コネクター

- 8 ピン 12V 電源コネクター

- SLI/XFIRE 電源コネクター

- フロントパネルオーディオコネクター

- USB 2.0 ヘッダー (USB 2.0 用 4 ポートをサポート ) x 2

- USB 3.0 ヘッダー (USB 3.0 用 2 ポートをサポート ) x 1

- 1 x Dr. Debug (7- セグメント Debug LED)

- 1 x 電源スイッチ（LED 付き）

- 1 x リセットスイッヱ（LED 付き）

- 1 x クリア CMOS スイッヱ（LED 付き）

BIOS 関連機能 - 64Mb AMI UEFI Legal BIOS（GUI サポート）

- プラグ＆プレイをサポート

- ACPI 1.1 準拠ウェイクアップイベント

- jumperfree モードサポート

- SMBIOS 2.3.1 サポート

サポート CD

モニター

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA 電圧のマ

ルチ調整

- ドライバ、ユーティリティ、AntiVirus ソフトウェア ( 試用バージョン )、

CyberLink MediaEspresso 6.5 試用版、ASRock MAGIX

Multimedia Suite - OEM

- CPU 温度検知

- マザーボード温度検知

- CPU/ シャーシ / 電源ファンタコメータ

- CPU/ シャーシ静音ファン（CPU 温度によりシャーシファン速度の

自動調整が可能）

165


- CPU/ シャーシファンマルチ速度制御

OS

- 電源モニター : +12V, +5V, +3.3V, Vcore

- Microsoft ® Windows ® 7 / 7 64-bit / Vista

TM

/ Vista

認証

64-bit / XP / XP 64-bit compliant

- FCC, CE, Microsoft ® WHQL 認証済み

- ErP/EuP 対応（ErP/EuP 対応の電源装置が必要です）

* 製品の詳細については、http://www.asrock.com を御覧なさい。

TM

1.3 ジャンパ設定

右の図はジャンパがどのように設定されているかを示しま

す。ジャンパキャップがピンに置かれている場合、ジャンパ

は “ショート” になります。ジャンパキャップがピンに置か

れていない場合、ジャンパは “オープン”になります。右の

図で、３ピンジャンパで、1-2 ピンを “ショート”の場合、こ

れらの２つのピンにジャンパキャップを置きます。

ジャンパ

CMOS の消去ジャンパ

(CLRCMOS1）

( ページ 2 アイテム 22 参照）

設定

デフォルト設定

説明

CMOS の消去

注 : CLRCMOS1 により、CMOS のデータをクリアできます。システムパラメータをクリアしデフォルト設定にリ

セットするには、コンピュータの電源をオフにし、電源装置から電源コードを抜いてください。15 秒待って

から、ジャンパキャップを使用して CLRCMOS1 のピン 2 とピン 3 を 5 秒間ショートしてください。ただし、

BIOS 更新の後すぐには CMOS をクリアしないでください。BIOS の更新の終了後直ちに CMOS をクリア

する必要がある場合、まずシステムを起動してからシャットダウンし、その後クリア CMOS アクションを実

行する必要があります。パスワード、日付、時刻、ユーザーデフォルトのプロファイルを忘れずにメモして

ください。1394 GUID と MAC アドレスは、CMOS バッテリを取り外した場合のみ消去されます。

クリアCMOSスイッチには、クリアCMOSジャンパと同じ機能があります。

166


1.4 オンボードのヘッダとコネクタ類。

オンボードのヘッダとコネクタ類はジャンパではありません。それらのヘッ

ダやコネクタにジャンパキャップをかぶせないでください。ヘッダやコネクタ

にジャンパキャップをかぶせると、マザーボードに深刻な影響を与える場

合があります。

シリアル ATA2 コネクタ

SATA2_2_3:

ページ 2, アイテム 15 を参照

SATA2_4_5:


これら 4 本のシリアル ATA2 (SATA2）

コネクタは内蔵ストレーデバイスに使用

する SATA データケーブルに対応して

います。現在の SATA2 インタフェース

の最大データ転送速度は 3.0Gb/s で

す。

シリアル ATA3 コネクタ

SATA3_A1_A2:


SATA3_A3_A4:


SATA3_0_1:


これら 6 本のシリアル ATA3 (SATA3）

コネクタは内蔵ストレーデバイスに使用

する SATA データケーブルに対応して

います。現在の SATA3 インタフェース

の最大データ転送速度は 6.0Gb/s で

す。背面 I/O の eSATA3 ポートに HDD

を取り付ける場合、内部 SATA3_A4 は

機能しません。

シリアル ATA（SATA）

データケーブル（オプション）

SATA データケーブルのどちらかの端

をマザーボードの SATA / SATA2 /

SATA3 ハードディスク、または SATA2

/ SATA3 コネクタに接続できます。

シリアル ATA（SATA）

電源ケーブル（オプション）

SATA HDD 電源

コネクタに接続

パワーサプラ

イに接続

USB 2.0 ヘッダ

(9 ピン USB2_3)


USB_PWR

P-3

P+3

1

GND

P+2

P-2

USB_PWR

SATA 電源ケーブルの黒端を各ドライ

ブの電源コネクタに接続し、白端をパ

ワーサプライの電源コネクタに接続し

てください。

I/O パネルには、デフォルトの 2 つの

USB 2.0 ポート以外に、このマザーボ

ードに 3 つの USB 2.0 ヘッダが搭載

されています。それぞれの USB 2.0

ヘッダは 2 つの USB 2.0 ポートをサ

ポートできます。


167

(9 ピン USB4_5)


(9 ピン USB6_7)


USB 3.0 ヘッダ

(19 ピン USB3_9_10)


Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(19 ピン USB3_11_12)


Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY


USB 3.0 ポート以外に、このマザーボ

ードに 2 つの USB 3.0 ヘッダが搭載

されています。それぞれの USB 3.0

ヘッダは 2 つの USB 2.0 ポートをサ

ポートできます。

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

赤外線モジュールコネクタ

(5 ピン IR1)


コンシューマー赤外線モジュールヘッダー

(4 ピン CIR1)

ページ２, アイテム 28 を参照

IRTX

+5VSB

DUMMY

1

IRRX

GND

このコネクタは赤外線の無線送受信モ

ジュールに対応します。

このヘッダーは、リモコン受光部

の接続に使用することができます。

168

フロントオーディオパネルコネクタ

(9 ピン HD_AUDIO1)


GND

PRESENCE#

MIC_RET

OUT_RET

このコネクタは、オーディオ機器との便

利な接続とコントロールを可能にする

フロンとオーディオパネルのためのイン

ターフェイスです。

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE


2.

1.

システムパネルコネクタ

(9 ピン PANEL1)


E.

C.

D.

ハイディフィニションオーディオはジャックセンシングをサポートしますが、

正しく機能するためにシャーシのパネルワイヤが HDA をサポートする必

要があります。このマニュアルとシャーシのマニュアルの指示に従って、シ

ステムを取り付けてください。

AC’97 オーディオパネルを使用する場合、次のように前面パネルのオー

ディオヘッダに取り付けてください。

A.

B.

Mic_IN (MIC) を MIC2_L に接続します。

Audio_R (RIN) を OUT2_R に、Audio_L (LIN) を

OUT2_L に接続します。

Ground (GND) を Ground (GND) に接続します。

MIC_RET と OUT_RET はオーディオパネル専用です。AC’97

オーディオパネルに接続する必要はありません。

フロントマイクを有効化するには。

Windows

®

XP / XP 64-bit OS の場合 :

“Mixer” ( ミキサー ) を選択し、続いて “Recorder” ( レコー

ダー ) を選択します。その後 “FrontMic” ( フロントマイク )

をクリックします。

Windows

®

7 / 7 64-bit / Vista TM / Vista TM 64-bit

OS の場合 :

Realtek コントロールパネルから “FrontMic” ( フロントマイ

ク ) タブを開きます。 “Recording Volume”( 録音音量 ) を

調整します。

このコネクタは数種類のシステムフロ

ントパネルの機能を提供します。

シャーシに付いている電源スイッチ、リセットスイッチ、システムステータスイン

ジケータを下記のピン割り当て指示に従ってこのヘッダに接続します。ケーブ

ルを接続する前にピンの正負極性にご注意ください。

PWRBTN ( 電源スイッチ ):

前面パネルに付いている電源スイッチに接続します。電源スイッチによるシス

テム電源オフ方法を設定して変更することも可能です。

RESET ( リセットスイッヱ ):

シャーシの前面パネルに付いているリセットスイッチに接続します。コンピュータ

がフリーズし、正常な再起動をしない場合は、リセットスイッチを押してコンピュー

タを再起動します。

PLED ( システム電源 LED):

シャーシの前面パネルに付いている電源ステータスインジケータに接続しま

す。LED は、システムが動作しているときに点灯します。LED はシステムが

S1/S3 スリープ状態のときに点滅します。システムが S4 スリープ状態になる

か、電源オフ (S5) になると、LED は消灯します。

169


170

シャーシスピーカーヘッダ

(4 ピン SPEAKER1)


HDLED ( ハードドライブアクティビティ LED):

シャーシの前面パネルに付いているハードドライブアクティビティ LED に接続

します。LED は、ハードドライブがデータの読み込みまたは書き込み動作をし

ているときに点灯します。

前面パネルのデザインはシャーシによって異なります。前面パネルモジュール

は、主に電源スイッチ、リセットスイッチ、電源 LED、ハードドライブアクティビティ

LED、スピーカーなどから構成されています。シャーシの前面パネルモジュー

ルをこのヘッダに接続する際は、ワイヤとピンの割り当てが正しく対応してい

ることを確認してください。

シャーシのスピーカーとこのヘッダを接

続してください。

電源 LED ヘッダー

(3 ピン PLED1)


シャーシおよび電源ファンコネクタ

(4 ピン CHA_FAN1)


(3 ピン CHA_FAN2)


1

PLED-

PLED+

シャーシ電源 LED をこのヘッダーに接

続し、システム電源ステータスを示す

ようにしてください。LED はシステムが

動作中の際にオンになります。S1 ス

テータスでは LED は点滅し続けます。

S3/S4 ステータス、または S5 ステー

タス ( 電源オフ ) の場合、LED は消灯

します。

ファンケーブルをファンコネクタに接続

し、黒いワイヤをアースピンに合わせて

ください。CHA_FAN1、CHA_FAN2 およ

び CHA_FAN3 は、ファンコントロールを

サポートします。

(3 ピン CHA_FAN3)


(3 ピン PWR_FAN1)


CPU ファンコネクタ

(4 ピン CPU_FAN1)


4 3 2 1

CPU_FAN_SPEED

FAN_SPEED_CONTROL

このコネクタには CPU ファケーブルを

接続します。黒いコードはアースピンに

接続してください。


(3 ピン CPU_FAN2)


このマザーボードでは 4 ピン CPU ファン ( クワイエットファン ) がサポートされていますが、ファ

ン速度コントロール機能がない場合でも、3 ピン CPU ファンは正常に作動します。3 ピン

CPU ファンをこのマザーボードの CPU ファンコネクタに接続しようとしている場合、ピン 1-3

に接続してください。

接続されたピン 1-3

3 ピンファンのインストール

ATX パワーコネクタ

(24 ピン ATXPWR1)


12 24

ATX 電源コネクタを接続します。

1 13

このマザーボードには 24 ピン ATX 電源コネクタが装備されてお

り、従来の 20 ピン ATX 電源装置を採用している場合でも作動し

ます。20 ピン ATX 電源を使用するには、ピン 1 およびピン 13 と

共に電源装置にプラグを差し込みます。

12 24

20 ピン ATX 電源装置の取り付け

1 13

ATX 12V コネクタ

(8 ピン ATX12V1)


8 5

4 1

ATX 電 12V 源コネクタを接続します。

このマザーボードで 8-pin ATX 12V 電源コネクタが提供されたが、従来の 4-pin ATX

12V 電源でも動作できます。 4-pin ATX 電源を使用する場合、電源を Pin 1 と Pin

5 とともに差し込んでください。

8 5

SLI/XFIRE 電源コネクタ

(4 ピン SLI/XFIRE_POWER1)


4-Pin ATX 12V 電源の取り付け

SLI/XFIRE_POWER1

4 1

このコネクタを使用する必要はありま

せんが、2 つのグラフィックスカードがこ

のマザーボードに同時に差し込まれて

いるとき、ハードディスクの電源コネクタ

に接続してください。

171


IEEE 1394 ヘッダ

(9 ピン FRONT_1394)


シリアルポートヘッダ

(9 ピン COM1)


RXTPAM_0

GND

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0


IEEE 1394 ポート以外に、このマザー

ボードに 1 つの IEEE 1394 ヘッダが

搭載されています。それぞれの IEEE

1394 ヘッダは 1 つの IEEE 1394 ポー

トをサポートできます。

この COM1 ヘッダは、シリアルポートモ

ジュールをサポートします。

HDMI_SPDIF ヘッダ

(2- ピン HDMI_SPDIF1)


1

GND

SPDIFOUT

HDMI_SPDIF ヘッダは、SPDIF 音声

出力を HDMI VGA カードに提供し、

システムで HDMI デジタル TV/ プロ

ジェクタ /LCD デバイスに接続できる

ようにします。HDMI VGA カードの

HDMI_SPDIF コネクタを、このヘッダに

接続してください。

172


1.5 クイックスイッヱ

マザーボードには電源スイッチ、リセットスイッチおよびクリアリング CMOS スイッチの 3 つのクイックスイッ

チがあり、システムの電源のオン / オフの素早い切り替えまたはリセットまたは CMOS 値の消去をできる

ようになっています。

電源スイッチ

(PWRBTN)


電源スイッチはクイックスイッチで、

システム電源のオン / オフを素早く切

り替えることができます。

リセットスイッヱ

(RSTBTN)


クリア CMOS スイッヱ

(CLRCBTN)


リセットスイッヱはクイックスイッヱ

で、システムを素早くリセットするこ

とができます。

クリア CMOS スイッヱはクイックス

イッヱで、CMOS 値を素早くクリア

できます。


173

2． BIOS 情報

BIOS セットアップユーティリティはマザーボードのフラッシュメモリに保存されています。コン

ピュータを起動させた後、POST（パワーオンセルフテスト）中に〈F2〉または <Del> を押し、

BIOS セットアップユーティリティに入ってください。押さない場合、POST はテストルーチンを

続けます。テストを実行した後に BIOS セットアップユーティリティに入りたい場合、POST 終

了後〈Ctrl〉＋〈Alt〉＋〈Delete〉を押すか、ケースのリセットスイッチを押してシステムを

再起動してください。BIOS セットアップユーティリティは、ユーザーフレンドリであることを目

指しています。これはメニュウ方式のプログラムです。スクロールさせることで様々なサブ

メニューを表示し、かつあらかじめ定義した選択肢から選択することが可能です。BIOS セッ

トアップの詳細な情報については、サポート CD 内のユーザーズマニュアル (PDF ファイル )

をごらんください。

3．ソフトウェアサポート CD 情報

このマザーボードは Microsoft ® Windows ® 7 / 7 64-bit / Vista TM / Vista TM 64bit / XP / XP 64-bit といった様々なマイクロソフトウインドウズオペレーティングシ

ステムをサポートします。マザーボードに付属しているサポート CD はマザーボードの特徴

を有効にするために必要なドライバやユーティリティを含んでいます。サポート CD を使用

するには、CDROM ドライブに CD を挿入してください。AUTORUN 機能が有効な場合、自

動的にメインメニュウが立ち上がります。AUTORUN 機能が無効な場合、サポート CD 内の

BIN フォルダにある ASSETUP.EXE をダブルクリックすることにより、メインメニュウが立ち

上がります。

174


1. 主板簡介

謝謝你采用了華擎 Z77 WS 主板 , 本主板由華擎嚴格制造 , 質量可靠 , 穩定性好 , 能

夠獲得卓越的性能。本安裝指南介紹了安裝主板的步驟。更加詳細的主板信息可參看

驅動光盤的用戶手冊。

由于主板規格和 BIOS 軟件將不斷升級 , 本手冊之相關內容變更恕不另行

通知。請留意華擎网站上公布的升級版本。你也可以在華擎網站找到最新

的顯卡和 CPU 支持表。

華擎网址：http://www.asrock.com

如果您需要與此主板有關的技術支持 , 請參觀我們的網站以了解您使用機

種的規格信息。 www.asrock.com/support/index.asp

1.1 包裝盒內物品

華擎 Z77 WS 主板

(ATX 規格 : 12.0 英吋 X 9.6 英吋 , 30.5 厘米 X 24.4 厘米 )

華擎 Z77 WS 快速安裝指南

華擎 Z77 WS 支持光盤

六條 Serial ATA(SATA) 數據線 ( 選配 )

一條 Serial ATA(SATA) 硬盤電源線 ( 選配 )

一塊 I/O 擋板

兩個華擎 SLI_Bridge 橋接卡

一個華擎 SLI_Bridge_3S 橋接卡

一個華擎 3-Way SLI 橋接卡

為了在 Windows

®

7 / 7 64-bit / Vista TM / Vista TM 64-bit 系統中取得

更好的性能，建議您在BIOS中將Storage Configuration（存儲配置）選項

設成AHCI模式。關于BIOS設置程序，請參見支持光盤中的“User Manual”

以了解相詳細信息。


175

1.2 主板規格

176

板載顯卡

架构

處理器

芯片組

系統內存

擴展插槽

- ATX 規格 : 12.0 英吋 X 9.6 英吋 , 30.5 厘米 X 24.4 厘米

- 优質鍍金電容設計（100% 日制高品質高傳導性固態電容）

- 支持第三代和二代 Intel ® Core TM i7 / i5 / i3 處理器

(LGA1155 針腳 )

- Digi 電源設計

- 8 + 4 電源相位設計

- 支持 Intel ® Turbo Boost 2.0 技術

- 支持 K- 系列解鎖的 CPU

- Intel ® Z77

- 支持 Intel ® 快速啟動技術和 Intel ® 智能連接技術

- 支持雙通道 DDR3 內存技術

- 配備四個 DDR3 DIMM 插槽

- 支持 DDR3 3000+( 超頻 )/2400( 超頻 )/2133( 超頻 )/1866

( 超頻 )/1600/1333/1066 non-ECC、un-buffered 內存

- 最高支持 32GB 系統容量

- 支持 Intel ® Extreme Memory Profile(XMP)1.3/1.2

- 5 x PCI Express 3.0 x16 插槽 (PCIE2: x16 模式或 PCIE1/

PCIE3/PCIE5/PCIE7: x16/0/16/0 模式或 x8/8/8/8 模式 )

* 使用 Intel ® Ivy Bridge CPU 方可支持 PCIE 3.0。若使用

Intel ® Sandy Bridge CPU，僅支持 PCIE 2.0。

- 1 x PCI Express 2.0 x16 插槽 (PCIE4: x4 模式 )

- 1 x PCI Express 2.0 x1 插槽

- 支持 AMD Quad CrossFireX TM ,4 路 CrossFireX TM ,3 路

CrossFireX TM 和 CrossFireX TM 技術

- 支持 NVIDIA ® Quad SLI TM ,4 路 SLI TM ,3 路 SLI TM 和 SLI TM 技術

* 僅內置 GPU 的處理器可支持 Intel ® HD Graphics 內置視覺特

性与 VGA 輸出。

- 支持 Intel ® HD Graphics 內置視覺特性 :Intel ® Quick Sync

Video 2.0、Intel ® InTru TM 3D、Intel ® Clear Video HD 技術、

Intel ® Insider TM 、Intel ® HD Graphics 2500/4000

- Intel ® Ivy Bridge CPU 支持 Pixel Shader 5.0、DirectX 11

技術。 Intel ® Sandy Bridge CPU 支持 Pixel Shader 4.1、

DirectX 10.1 技術

- 最大共享內存 1760MB

- 支持 HDMI 1.4a, 最高分辨率達 1920x1200 @ 60Hz

- 支持 HDMI, 可支持 Auto Lip Sync、Deep Color (12bpc)、

xvYCC 與 HBR( 高位速音頻 )( 需配備兼容 HDMI 的顯示器 )

- 通過 HDMI 接口支持 HDCP 功能

- 通過 HDMI 接口可播放 1080 線藍光光盤 (BD) / HD-DVD 光盤



177

178

- 1 x 電源指示燈連接排針

- 2 x CPU 風扇接頭 (1 x 4 針、1 x 3 針 )

- 3 x 機箱風扇接頭 (1 x 4 針、2 x 3 針 )

- 1 x 電源風扇接頭 (3 針 )

- 24 針 ATX 電源接頭

- 8 針 12V 電源接頭

- SLI/XFire 電源接頭

- 前置音頻面板接頭

- 2 x USB 2.0 接針 ( 可支持 4 個額外的 USB 2.0 接口 )

- 1 x USB 3.0 接針 ( 可支持 2 個額外的 USB 3.0 接口 )

- 1 x Dr. Debug (7 段調試 LED) (見第42-45頁)

BIOS

支持光盤

硬件監控器

操作系統

- 1 個帶 LED 的電源開關

- 1 個帶 LED 的復位開關

- 1 個帶 LED 的 CMOS 數據清除開關

- 64Mb AMI UEFI Legal BIOS, 支持 GUI

- 支持即插即用（Plug and Play,PnP）

- ACPI 1.1 電源管理

- 支持 jumperfree 免跳線模式

- 支持 SMBIOS 2.3.1

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA 電壓多功能

調節器

驅動程序 , 工具軟件 , 殺毒軟件（測試版本 ),CyberLink

MediaEspresso 6.5 試用版 , 華擎 MAGIX 多媒体套件 - OEM

- CPU 溫度偵測

- 主板溫度偵測

- CPU/ 機箱 / 電源風扇轉速計

- CPU/ 机箱靜音風扇（允許根据 CPU 溫度自動調整机箱風扇速

度）

- CPU/ 機箱風扇多速控制

- 電壓範圍：+12V, +5V, +3.3V, 核心電壓

- Microsoft ® Windows ® 7/7 64 位元 /Vista TM

/Vista

TM

64 位元 /

認證

XP/XP 64 位元适用于此主板

- FCC, CE, WHQL

- 支持 ErP/EuP( 需要同時使用支持 ErP/EuP 的電源供應器 )

* 請參閱華擎網站了解詳細的產品信息 : http://www.asrock.com


1.3 跳線設置

插圖所示的就是設置跳線的方法。當跳線

帽放置在針腳上時 , 這個跳線就是“ 短

接”。如果針腳上沒有放置跳線帽 , 這個

跳線就是“開路”。插圖顯示了一個 3 針

腳的跳線 , 當跳線帽放置在針腳 1 和針腳 2

之間時就是“短接”。

接腳

清除 CMOS

(CLRCMOS1, 3 針腳跳線 )

( 見第 2 頁第 22 項 )

設定

默認設置清除 CMOS

設置，請關閉計算机，然后從電源插座上拔掉電源線。等待 15 秒后，使用跳

線帽將 C L R C M O S1 上的插針 2 和插針 3 短接 5 秒。但是，請勿在更新 B I O S 后

立即清除 C M O S。如果需要在更新 B I O S 后立即清除 C M O S，必須在執行 C M O S

清除操作之前，先啟動然后關閉系統。請注意，只有取出 C M O S 電池，密碼、

日期、時間、用戶默認配置文件、1394 GUID 和 MAC 地址才會被清除。

清除CMOS開關与清除CMOS跳線具有相同的功能。


179

1.4 板載接頭和接口

板載接頭和接口不是跳線。切勿將跳線帽放置在這些接頭和接口上。將

跳線帽放置在接頭和接口上將會導致主板的永久性損壞！

Serial ATA2 接口

(SATA2_2_3: 見第 2 頁第 15 項 )

(SATA2_4_5: 見第 2 頁第 16 項 )

這裡有四組 Serial ATA2

(SATA2) 接口支持 Serial (SATA)

數據線作為內部儲存設置。目前

SATA2 界面理論上可提供高達

3.0Gb/s 的數據傳輸速率。

Serial ATA3 接口

(SATA3_A1_A2: 見第 2 頁第 12 項 )

(SATA3_A3_A4: 見第 2 頁第 13 項 )

(SATA3_0_1: 見第 2 頁第 14 項 )

這裡有六組 Serial ATA3

(SATA3) 接口支持 Serial (SATA)

數據線作為內部儲存設置。目前

SATA3 界面理論上可提供高達

6.0Gb/s 的數據傳輸速率。若您

將硬盤連接到后側面板 I/O 的 eSATA3 接口，則內部的

SATA3_A4 將失效。

180

Serial ATA (SATA)

數據線 ( 選配 )

Serial ATA (SATA)

電源線

( 選配 )

連接到 SATA 硬盤

電源接口

連接到電源

適配器

USB 2.0 擴展接頭

(9 針 USB2_3)

( 見第 2 頁第 25 項 )

USB_PWR

P-3

P+3

1

P-2

USB_PWR

SATA 數據線的任意一端均可連

接 SATA/SATA2/SATA3 硬盤或者

主板上的 SATA2/SATA3 接口。

請將 SATA 電源線黑色的一端連

接到 SATA 驅動器的電源接口。

然后將 SATA 電源線白色的一端

連接到電源適配器的電源接口。

除了位於 I/O 面板的兩個默認

USB 2.0 接口之外，這款主板有

三組 USB 2.0 接針。這組 USB 2.0

接針可以支持兩個 USB 2.0 接

口。


(9 針 USB4_5)

( 見第 2 頁第 26 項 )

(9 針 USB6_7)

( 見第 2 頁第 27 項 )

USB 3.0 擴展接頭

(19 針 USB3_9_10)

( 見第 2 頁第 10 項 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(19 針 USB3_11_12)

( 見第 2 頁第 9 項 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

除了位於 I/O 面板的八個默認

USB 3.0 接口之外，這款主板有

兩組 USB 3.0 接針。每組 USB 3.0

接針可以支持兩個 USB 3.0 接

口。

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

紅外線模塊接頭

(5 針 IR1)

( 見第 2 頁第 32 項 )

IRTX

+5VSB

DUMMY

1

IRRX

GND

這個接頭支持一個選配的無線發

送和接受紅外線的模塊。

消費類紅外線模塊接頭

(4 針 CIR1)

( 見第 2 頁第 28 項 )

前置音頻面板接頭

(9 針 HD_AUDIO1)

( 見第 2 頁第 35 項 )

此接口可以連接遙控器。

GND

PRESENCE#

MIC_RET

OUT_RET

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE

可以方便連接音頻設備。


181

1. 高保真音頻 (High Definition Audio, HDA) 支持智能音頻接口檢測功能 (Jack

Sensing), 但是機箱面板的連線必須支持 HDA 才能正常使用。請按我們提供的手冊

和機箱手冊上的使用說明安裝您的系統。2. 如果您使用 AC’97 音頻面板 , 請按

照下面的步驟將它安裝到前面板音頻接針 :

A. 將 Mic_IN(MIC) 連接到 MIC2_L。

B. 將 Audio_R(RIN) 連接到 OUT2_R, 將 Audio_L(LIN) 連接到 OUT2_L。

C. 將 Ground(GND) 連接到 Ground(GND)。

D. MIC_RET 和 OUT_RET 僅用于 HD 音頻面板。您不必將它們連接到 AC’97 音頻面板。

E. 開啟前置麥克風。

在 Windows

®

XP / XP 64 位元操作系統中 :

選擇”Mixer”。選擇”Recorder”。接著點擊”FrontMic”。

在 Windows ® 7 / 7 64 位元 / Vista TM / Vista TM 64 位元操作系統中 :

在 Realtek 控制面板中點擊”FrontMic”。調節”Recording Volume”。

系統面板接頭

(9 針 PANEL1)

( 見第 2 頁第 20 項 )

這個接頭提供數個系統前面板功

能。

182

機箱喇叭接頭

(4 針 SPEAKER1)

( 見第 2 頁第 21 項 )

根據下面的針腳說明連接機箱上的電源開關、重啟按鈕與系統狀態指示燈

到這個排針。根據之前請注意針腳的正負極。

PWRBTN( 電源開關 ):

連接機箱前面板的電源開關。您可以設置用電源鍵關閉系統的方式。

RESET( 重啟開關 ):

連接機箱前面板的重啟開關。當電腦死機且無法正常重新啟動時 , 可按下

重啟開關重新啟動電腦。

PLED( 系統電源指示燈 ):

連接機箱前面板的電源狀態指示燈。當系統運行時 , 此指示燈亮起。當系

統處于 S1/S3 待機模式時 , 此指示燈保持閃爍。當系統處于 S4 待機模式

或關機 (S5) 模式時 , 此指示燈熄滅。

HD LED( 硬盤活動指示燈 ):

連接機箱前面板的硬盤動作指示燈。當硬盤正在讀取或寫入數據時 , 此指

示燈亮起。

前面板設計因機箱不同而有差異。前面板模塊一般由電源開關、重啟開

關、電源指示燈、硬盤動作指示燈、喇叭等構成。將您的機箱前面板連接

到此排針時 , 請確認連接線與針腳上的說明相對應。

請將機箱喇叭連接到這個接頭。


電源指示燈連接排針

(3 針 PLED1)

( 見第 2 頁第 19 項 )

機箱 , 電源風扇接頭

(4 針 CHA_FAN1)

( 見第 2 頁第 30 項 )

(3 針 CHA_FAN2)

( 見第 2 頁第 29 項 )

(3 針 CHA_FAN3)

( 見第 2 頁第 44 項 )

(3 針 PWR_FAN1)

( 見第 2 頁第 3 項 )

1

PLED-

PLED+

請將機箱電源指示燈連接到這一

排針，以指示系統電源狀態。當

系統正在運行時，LED 指示燈亮。

在 S1/S3 模式下，LED 指示燈會

不停閃爍。在 S3/S4 或 S5 模式

( 關機 ) 下，LED 指示燈會熄滅。

請將風扇連接線接到這個接頭，

並讓黑線與接地的針腳相接。

CHA_FAN1、CHA_FAN2 和

CHA_FAN3 支持風扇控制。

CPU 風扇接頭

(4 針 CPU_FAN1)

( 見第 2 頁第 4 項 )

4 3 2 1

請將 CPU 風扇連接線接到這個接

頭，讓黑線與接地的針腳相接。

CPU_FAN_SPEED

FAN_SPEED_CONTROL

雖然此主板支持 4-Pin CPU 風扇 (Quiet Fan, 靜音風扇 ), 但是沒有調速功能的

3-Pin CPU 風扇仍然可以在此主板上正常運行。如果您打算將 3-Pin CPU 風扇

連接到此主板的 CPU 風扇接口 , 請將它連接到 Pin 1-3。

Pin 1-3 連接

3-Pin 風扇的安裝

(3 針 CPU_FAN2)

( 見第 2 頁第 5 項 )

ATX 電源接頭

(24 針 ATXPWR1)

( 見第 2 頁第 8 項 )

12 24

請將 ATX 電源供應器連接到這個

接頭。

1 13

183


雖然此主板提供 24-pin ATX 電源接口 , 但是您仍然可以使用

傳統的 20-pin ATX 電源。為了使用 20-pin ATX 電源 , 請順著

Pin 1 和 Pin 13 插上電源接頭。

12 24

20-Pin ATX 電源安裝說明

1 13

ATX 12V 接頭

(8 針 ATX12V1)

( 見第 2 頁第 1 項 )

8 5

4 1

請將一個 ATX 12V 電源供應器接

到這個接頭。

SLI/XFIRE 電源接頭

(4 針 SLI/XFIRE_POWER1)

( 見第 2 頁第 43 項 )

IEEE 1394 接口

(9 針 FRONT_1394)

( 見第 2 頁第 31 項 )

串行接口連接器

(9 針 COM1)

( 見第 2 頁第 33 項 )

雖然此主板提供 8-pin ATX 12V 電源接口 , 但是您仍然可以使用傳統的 4-pin

ATX 12V 電源。為了使用 4-pin ATX 12V 電源 , 請順著 Pin 1 和 Pin 5 插上電

源接頭。

8 5

4-Pin ATX 12V 電源安裝說明

SLI/XFIRE_POWER1

4 1

一般不需要使用這個接口，但是

如果主板上同時插入兩塊顯卡時

，請將它連接到硬盤電源接口。

RXTPAM_0

GND

RXTPBM_0

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

除了位於 I/O 面板的一個默認

IEEE 1394 接口之外，這款主板

有一組 IEEE 1394 接針。這組

IEEE 1394 接針可以支持一個

IEEE 1394 接口。

這個 COM1 端口支持一個串行接

口的外設。

184

HDMI_SPDIF 接頭

(2 針 HDMI_SPDIF1)

( 見第 2 頁第 34 項 )

1

GND

SPDIFOUT

HDMI_SPDIF 接頭，提供 SPDIF

音頻輸出至 HDMI 顯卡，支持將

電腦連接至帶 HDMI 的數字電視

/ 投影儀 / 液晶顯示器等設備。

請將 HDMI 顯卡的 HDMI_SPDIF 接

口連接到這個接頭。


1.5 快速開關

本主板有三個快速開關 : 電源開關 , 復位開關與 C M O S 數據清除開關 , 可讓用戶快速

開啟 / 關閉或復位系統 , 或者清除 CMOS 中的數據。

電源開關

(PWRBTN)

( 見第 2 頁第 18 項 )

電源開關是一種快速開關 , 可

讓用戶快速開啟 / 關閉系

統。

復位開關

(RSTBTN)

( 見第 2 頁第 17 項 )

復位開關是一種快速開關 , 可

讓用戶快復位系

統。

CMOS 數據清除開關

(CLRCBTN)

( 見第 3 頁第 17 項 )

CMOS 數據清除開關是一種快

速開關 , 可讓用戶快速清除

CMOS 中的數據。


185

2. BIOS 信息

主板上的 Flash Memory 存儲了 BIOS 設置程序。請再啟動電腦進行開機自檢 (POST)

時按下 < F2> 或 < D e l > 鍵進入 B I O S 設置程序；此外，你也可以讓開機自檢 ( P O S T )

進行常規檢驗。如果你需要在開機自檢 ( P O S T ) 之后進入 B I O S 設置程序，請按下

<Ctrl>+<Alt>+<Delete> 鍵重新啟動電腦，或者按下系統面板上的重啟按鈕。有關

BIOS 設置的詳細信息，請查閱隨機支持光盤裡的用戶手冊 (PDF 文件 )。

3. 支持光盤信息

本主板支持各種微軟視窗操作系統：Microsoft ® Windows ® 7/7 64 位元 /Vista

TM

/

Vista

TM

64 位元 /XP/XP 64 位元。主板隨機支持光盤包含各種有助于提高主板效能的

必要驅動和實用程序。請將隨機支持光盤放入光驅裡，如果電腦的“自動運行”功能

已啟用，屏幕將會自動顯示主菜單。如果主菜單不能自動顯示，請查找支持光盤內

BIN 文件夾下的“ASSETUP.EXE”，并雙擊它，即可調出主菜單。

186


電子信息產品污染控制標示

依據中國發布的「電子信息產品污染控制管理辦法」及 SJ/T 11364-2006「電子信息

產品污染控制標示要求」，電子信息產品應進行標示，藉以向消費者揭露產品中含有

的有毒有害物質或元素不致發生外洩或突變從而對環境造成污染或對人身、財產造成

嚴重損害的期限。依上述規定，您可于本產品之印刷電路板上看見圖一之標示。圖一

中之數字為產品之環保使用期限。由此可知此主板之環保使用期限為 10 年。

圖一

有毒有害物質或元素的名稱及含量說明

若您慾了解此產品的有毒有害物質或元素的名稱及含量說明，請參照以下表格及說

明。

部件名稱

有害物質或元素

鉛 (Pb) 鎘 (Cd) 汞 (Hg) 六价鉻 (Cr(VI)) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE)

印刷電路板

及電子組件

X O O O O O

外部信號連

接頭及線材

X O O O O O

O: 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標準規定

的限量要求以下。

X: 表示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標準

規定的限量要求，然該部件仍符合歐盟指令 2002/95/EC 的規範。

備註 : 此產品所標示之環保使用年限，系指在一般正常使用狀況下。


187

1. 主機板簡介

謝謝你採用了華擎 Z77 WS 主機板 , 本主機板由華擎嚴格製造 , 品質可靠 , 穩定性好 ,

能夠獲得卓越的性能。此快速安裝指南包括了主機板介紹和分步驟安裝指導。您可以

查看支持光碟裡的使用手冊了解更詳細的資料。

由於主機板規格和 BIOS 軟體將不斷更新 , 本手冊之相關內容變更恕不另

行通知。請留意華擎網站上公布的更新版本。你也可以在華擎網站找到最

新的顯示卡和 CPU 支援列表。

華擎網址：http://www.asrock.com

如果您需要與此主機板有關的技術支援 , 請參觀我們的網站以了解您使用

機種的規格訊息。 www.asrock.com/support/index.asp

1.1 包裝盒內物品

華擎 Z77 WS 主機板

(ATX 規格 : 12.0 英吋 x 9.6 英吋 , 30.5 公分 x 24.4 公分 )

華擎 Z77 WS 快速安裝指南

華擎 Z77 WS 支援光碟

六條 Serial ATA(SATA) 數據線 ( 選配 )

一條 Serial ATA(SATA) 硬碟電源線 ( 選配 )

一塊 I/O 擋板

兩張華擎 SLI_Bridge 卡

一張華擎 SLI_Bridge_3S 卡

一張華擎 3-Way SLI Bridge 卡

若要在Windows ® 7 / 7 64位元 / Vista TM / Vista TM 64位元中發揮更好的效

能，建議您將儲存裝置組態中的BIOS選項設為AHCI模式。有關BIOS設定的

詳細資訊，請參閱支援光碟中的「使用者手冊」。

188


擴充插槽

內建顯示

架構

處理器

晶片組

系統記憶體

1.2 主機板規格

- ATX 規格 : 12.0 英吋 x 9.6 英吋 , 30.5 公分 x 24.4 公分

- 頂級黃金電容器設計（百分百日本製造的高品質導電高分子電

容器）

- 支援第三代和二代 Intel ® Core TM i7 / i5 / i3 處理器

(LGA1155 腳位 )

- Digi 電源設計

- 8 + 4 電源相位設計

- 支援 Intel ® Turbo Boost 2.0 技術

- 支援 K 系列解除鎖定 CPU

- Intel ® Z77

- 支持 Intel ® 快速啟動技術和 Intel ® 智能連接技術

- 支援雙通道 DDR3 記憶體技術

- 4 個 DDR3 DIMM 插槽

- 支援 DDR3 3000+( 超頻 )/2400( 超頻 )/2133( 超頻 )/1866

( 超頻 )/1600/1333/1066 non-ECC、un-buffered 記憶體

- 最高支援 32GB 系統容量

- 支援 Intel ® Extreme Memory Profile(XMP)1.3/1.2

- 5 x PCI Express 3.0 x16 插槽 (PCIE2: x16 模式或 PCIE1/

PCIE3/PCIE5/PCIE7: x16/0/16/0 模式或 x8/8/8/8 模式 )

* PCIE 3.0 僅適用 Intel ® Ivy Bridge CPU。Intel ® Sandy

Bridge CPU 僅支援 PCIE 2.0。

- 1 x PCI Express 2.0 x16 插槽 (PCIE4: x4 模式 )

- 1 x PCI Express 2.0 x1 插槽

- 支援 AMD Quad CrossFireX TM , 4-Way CrossFireX TM , 3-Way

CrossFireX TM 和 CrossFireX TM 技術

- 支援 NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM 和 SLI TM

技術

* 只有整合 GPU 的處理器才支援 Intel ® HD Graphics 內建視覺

技術 (Built-in Visuals) 與 VGA 輸出。

- 支援 Intel ® HD Graphics 內建視覺技術 (Built-in

Visuals)：Intel ® Quick Sync Video 2.0、Intel ® InTru TM

3D、Intel ® Clear Video HD Technology、Intel ®

Insider TM 、Intel ® HD Graphics 2500/4000

- Intel ® Ivy Bridge CPU 支援 Pixel Shader 5.0、DirectX 11

技術。Intel ® Sandy Bridge CPU 支援 Pixel Shader 4.1、

DirectX 10.1 技術

- 最大共享記憶體 1760MB

- 支援 HDMI 1.4a, 最高解析度達 1920x1200 @ 60Hz

- 支援 HDMI, 可支援 Auto Lip Sync、Deep Color (12bpc)、

189


190

接頭

USB 3.0

音效

網路功能

xvYCC 與 HBR( 高位元率音效 )( 需具備相容 HDMI 的銀幕 )

- HDMI 接口支援 HDCP 功能

- HDMI 接口可播放 1080p 藍光光碟 (BD) / HD-DVD 光碟

- 7.1 聲道高清晰音效 , 支援內容保護功能 (Realtek ALC898 音

效編解碼器 )

- 支援高級藍光音效


- Broadcom BCM57781

- 支援網路喚醒（Wake-On-LAN）

- 支援 Energy Efficient Ethernet 802.3az

- 支援雙 LAN 彙整功能

- 支援 PXE

- 2 x Intel ® Z77 的 SATA3 6.0Gb/s 接頭，支援 RAID (RAID 0, 儲存裝置

RAID 1, RAID 5, RAID 10, Intel Rapid Storage 和 Intel

Smart Response 技術 ), NCQ, AHCI 和熱插拔功能

- 4 x ASMedia ASM1061 的 SATA3 6.0Gb/s 接頭，支援 NCQ,

AHCI 和熱插拔功能 (SATA3_A4 接頭和 eSATA3 接口共享資源 )

- 4 x Intel ® Z77 的 SATA2 3.0Gb/s 接頭，支援 RAID (RAID 0,

RAID 1, RAID 5, RAID 10, Intel Rapid Storage 和 Intel

Smart Response 技術 ), NCQ, AHCI 和熱插拔功能

Rear Panel I/O I/O 界面

( 後背板輸入 / - 1 個 PS/2 鍵盤 / 滑鼠接口

輸出接口 ) - 1 個 HDMI 接口

- 1 個光纖 SPDIF 輸出接口

- 2 個可直接使用的 USB 2.0 接口

- 1 個 eSATA3 接口

- 8 個可直接使用的 USB 3.0 接口

- 2 個 RJ-45 區域網接口與 LED 指示燈 (ACT/LINK LED 和 SPEED

LED)

- 1 個 IEEE 1394 接口

- 1 個 LED CMOS 數據清除開關

- 高清晰音效插孔：後置喇叭 / 中置喇叭 / 低音喇叭 / 音效輸入

/ 前置喇叭 / 麥克風

- 4 x Intel ®

到 5Gb/s

Z77 的後置 USB 3.0 接頭，支援 USB 1.0/2.0/3.0

- 4 x Etron EJ188 的後置 USB 3.0 接頭，支援 USB 1.0/2.0/3.0

到 5Gb/s

- 2 x Etron EJ188 的前置 USB 3.0 接頭 ( 支援 4 個 USB 3.0 接

頭 )，支援 USB 1.0/2.0/3.0 到 5Gb/s

- 1 x 紅外線模組接頭

- 1 x 消費性紅外線模組插座


- 1 x 序列埠

- 1 x HDMI_SPDIF 接頭

- 1 x IEEE 1394 接頭

- 1 x 電源指示燈接頭

- 2 x CPU 風扇接頭 (1 x 4 針、1 x 3 針 )

- 3 x 機箱風扇接頭 (1 x 4 針、2 x 3 針 )

- 1 x 電源風扇接頭 (3 針 )

- 24 針 ATX 電源接頭

- 8 針 12V 電源接頭

- SLI/XFire 電源接頭

- 前置音效接頭

- 2 x USB 2.0 接頭 ( 可支援 4 個額外的 USB 2.0 接口 )

- 1 x USB 3.0 接頭 ( 可支援 2 個額外的 USB 3.0 接口 )

- 1 x Dr. Debug (7 段顯示器偵錯 LED)(見第42~45頁)

- 1 個 LED 電源開關

- 1 個 LED 重置開關

BIOS

- 1 個 LED CMOS 數據清除開關

- 64Mb AMI UEFI Legal BIOS ( 支援 GUI)

- 支援即插即用（Plug and Play,PnP）

- ACPI 1.1 電源管理

- 支援 jumperfree 免跳線模式

- 支援 SMBIOS 2.3.1

- CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA 電壓多功能

調節

支援光碟

硬體監控

- 驅動程式 , 工具軟體 , 防毒軟體（試用版本 ),CyberLink

MediaEspresso 6.5 試用版 , 華擎 MAGIX 多媒體套餐 - OEM

- CPU 溫度偵測

- 主機板溫度偵測

- CPU/ 機箱 / 電源風扇轉速計

- CPU/ 機箱靜音風扇 ( 可透過 CPU 溫度自動調節機箱的風扇速

度 )

- CPU/ 機箱風扇多速控制

- 電壓範圍：+12V, +5V, +3.3V, 核心電壓

- Microsoft ® Windows ® 7/7 64 位元 /Vista TM /Vista TM 64 位元 / 操作系統

認證

XP/XP 64 位元

- FCC, CE, WHQL

- 支援 ErP/EuP( 需要同時使用支援 ErP/EuP 的電源供應器 )

* 請參閱華擎網站了解詳細的產品訊息 : http://www.asrock.com

191


1.3 跳線設置

插圖所示的就是設置跳線的方法。當跳線

帽放置在針腳上時 , 這個跳線就是“ 短

接＂。如果針腳上沒有放置跳線帽 , 這個

跳線就是“開路＂。插圖顯示了一個 3 針

腳的跳線 , 當跳線帽放置在針腳 1 和針腳 2

之間時就是“短接＂。

接腳

清除 CMOS

(CLRCMOS1, 3 針腳跳線 )

( 見第 2 頁第 22 項 )

設定

默認設置清除 CMOS

定，請先關閉電腦電源，並從電源插座中拔下電源線，等待 15 秒鐘之後，使用跳

線帽使 CLRCMOS1 的 pin2 及 pin3 短路 5 秒的時間。但請勿於更新 BIOS 後立即清除

CMOS。如需於更新 BIOS 後立即清除 CMOS，您必須先開機再關機，然後再執行 CMOS

清除操作。請注意，只有在移除 C M O S 電池的情況下，密碼、日期、時間、使用者

預設設定檔、1394 GUID 及 MAC 位址才會清除。

Clear CMOS開關的功能與Clear CMOS跳線相同。

192


1.4 接頭

此類接頭是不用跳線帽連接的，請不要用跳線帽短接這些接頭。

跳線帽不正確的放置將會導致主機板的永久性損壞 !

Serial ATA2 接口

(SATA2_2_3: 見第 2 頁第 15 項 )

(SATA2_4_5: 見第 2 頁第 16 項 )

這裡有四組 Serial ATA2

(SATA2) 接口支援 SATA 數據線

作為內部儲存設置。目前 SATA2

界面理論上可提供高達 3.0Gb/s

的數據傳輸速率。

Serial ATA3 接口

(SATA3_A1_A2: 見第 2 頁第 12 項 )

(SATA3_A3_A4: 見第 2 頁第 13 項 )

(SATA3_0_1: 見第 2 頁第 14 項 )

這裡有六組 Serial ATA3

(SATA3) 接口支援 SATA 數據線

作為內部儲存設置。目前 SATA3

界面理論上可提供高達 6.0Gb/s

的數據傳輸速率。若在後方 I/O

的 eSATA3 連接埠安裝硬碟，內

部 SATA3_A4 將失去作用。

Serial ATA (SATA)

數據線

( 選配 )

Serial ATA (SATA)

電源線

( 選配 )

連接到 SATA 硬碟

電源接口

連接到電源

適配器

USB 2.0 擴充接頭

(9 針 USB2_3)

( 見第 2 頁第 25 項 )

1

USB_PWR

P-3

P+3

P-2

USB_PWR

SATA 數據線的任意一端均可連

接 SATA/SATA2/SATA3 硬碟或者

主機板上的 SATA2/SATA3 接口。

請將 SATA 電源線黑色的一端連

接到 SATA 驅動器的電源接口。

然後將 SATA 電源線白色的一端

連接到電源適配器的電源接口。

除了位於 I/O 面板的兩個 USB

2.0 接口之外，這款主機板有三

組 USB 2.0 接針。每組 USB 2.0

接針可以支援兩個 USB 2.0 接

口。

193


(9 針 USB4_5)

( 見第 2 頁第 26 項 )

(9 針 USB6_7)

( 見第 2 頁第 27 項 )

USB 3.0 擴充接頭

(19 針 USB3_9_10)

( 見第 2 頁第 10 項 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

(19 針 USB3_11_12)

( 見第 2 頁第 9 項 )

Vbus

IntA_P4_SSRX-

IntA_P4_SSRX+

GND

IntA_P4_SSTX-

IntA_P4_SSTX+

GND

IntA_P4_D-

IntA_P4_D+

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

除了位於 I/O 面板的八個 USB

3.0 接口之外，這款主機板有兩

組 USB 3.0 接針。每組 USB 3.0

接針可以支援兩個 USB 3.0 接口

。

IntA_P5_SSRX-

IntA_P5_SSRX+

GND

IntA_P5_SSTX-

IntA_P5_SSTX+

GND

IntA_P5_D-

IntA_P5_D+

DUMMY

紅外線模組接頭

(5 針 IR1)

( 見第 2 頁第 32 項 )

IRTX

+5VSB

DUMMY

1

IRRX

GND

這個接頭支援一個選配的模組 ,

可用來無線傳輸和接收紅外線。

194

消費性紅外線模組插座

(4 針 CIR1)

( 見第 2 頁第 28 項 )

前置音效接頭

(9 針 HD_AUDIO1)

( 見第 2 頁第 35 項 )

此插座可用於連接遙控器。

GND

PRESENCE#

MIC_RET

OUT_RET

可以方便連接音效設備。

1

OUT2_R

MIC2_R

MIC2_L

OUT2_L

J_SENSE


1. 高清晰音效 (High Definition Audio, HDA) 支援智能音效接口檢測功能 (Jack

Sensing), 但是機箱面板的連線必須支持 HDA 才能正常使用。請按我們提供的手冊

和機箱手冊上的使用說明安裝您的系統。

2. 如果您使用 AC＇97 音效面板 , 請按照下面的步驟將它安裝到前面板音效接針 :

A. 將 Mic_IN(MIC) 連接到 MIC2_L。

B. 將 Audio_R(RIN) 連接到 OUT2_R, 將 Audio_L(LIN) 連接到 OUT2_L。

C. 將 Ground(GND) 連接到 Ground(GND)。

D. MIC_RET 和 OUT_RET 僅用於 HD 音效面板。您不必將它們連接到 AC＇97 音效面板。

E. 開啟前置麥克風。

在 Windows ® XP / XP 64 位元作業系統中 :

選擇＂Mixer＂。選擇＂Recorder＂。接著點選＂FrontMic＂。

在 Windows

®

7 / 7 64 位元 / Vista

TM

/ Vista

TM

64 位元作業系統中 :

在 Realtek 控制面板中點選＂FrontMic＂。調整＂Recording Volume＂。

系統面板接頭

(9 針 PANEL1)

( 見第 2 頁第 20 項 )

可接各種不同燈，電源開關及重

啟鍵等各種連線。

機箱喇叭接頭

(4 針 SPEAKER1)

( 見第 2 頁第 21 項 )

請根據下面的腳位說明連接機箱上的電源開關、重開按鈕與系統狀態指示

燈到這個接頭。請先注意針腳的正負極。

PWRBTN( 電源開關 ):

連接機箱前面板的電源開關。您可以設定用電源鍵關閉系統的方式。

RESET( 重開開關 ):

連接機箱前面板的重開開關。當電腦當機且無法正常重新啟動時 , 可按下

重開開關重新啟動電腦。

PLED( 系統電源指示燈 ):

連接機箱前面板的電源狀態指示燈。當系統運行時 , 此指示燈亮起。當系

統處於 S1/S3 待命模式時 , 此指示燈保持閃爍。當系統處於 S4 待命模式

或關機 (S5) 模式時 , 此指示燈熄滅。

HD LED( 硬碟活動指示燈 ):

連接機箱前面板的硬碟動作指示燈。當硬碟正在讀取或寫入數據時 , 此指

示燈亮起。

前面板設計因機箱不同而有差異。前面板模組一般由電源開關、重開開

關、電源指示燈、硬碟活動指示燈、喇叭等構成。將您的機箱前面板連接

到此接頭時 , 請確認連接線與針腳上的說明相對應。

請將機箱喇叭連接到這個接頭。

195


196

電源指示燈接頭

(3 針 PLED1)

( 見第 2 頁第 19 項 )

機箱 , 電源風扇接頭

(4 針 CHA_FAN1)

( 見第 2 頁第 30 項 )

(3 針 CHA_FAN2)

( 見第 2 頁第 29 項 )

(3 針 CHA_FAN3)

( 見第 2 頁第 44 項 )

(3 針 PWR_FAN1)

( 見第 2 頁第 3 項 )

1

PLED-

PLED+

PLED+

請將機箱電源指示燈連接到此接

頭，以指示系統電源狀態。當系

統正在運行時，LED 指示燈亮。

在 S1/S3 模式下，LED 指示燈會

不停閃爍。在 S4 或 S5 模式 ( 關

機 ) 下，LED 指示燈會熄滅。

請將風扇連接線接到這個接頭，

並讓黑線與接地的針腳相接。

CHA_FAN1、CHA_FAN2 和

CHA_FAN3 支援風扇控制。

CPU 風扇接頭

(4 針 CPU_FAN1)

( 見第 2 頁第 4 項 )

4 3 2 1

請將 CPU 風扇連接線接到這個接

頭，並讓黑線與接地的針腳相接

。

+12V

CPU_FAN_SPEED

FAN_SPEED_CONTROL

雖然此主板支持 4-Pin CPU 風扇 (Quiet Fan, 靜音風扇 ), 但是沒有調速功能的

3-Pin CPU 風扇仍然可以在此主板上正常運行。如果您打算將 3-Pin CPU 風扇

連接到此主板的 CPU 風扇接口 , 請將它連接到 Pin 1-3。

Pin 1-3 連接

3-Pin 風扇的安裝

(4 針 CPU_FAN2)

( 見第 2 頁第 5 項 )

ATX 電源接頭

(24 針 ATXPWR1)

( 見第 2 頁第 8 項 )

12 24

請將 ATX 電源供應器連接到這個

接頭。

1 13


雖然此主機板提供 24-pin ATX 電源接口 , 但是您仍然可以使

用傳統的 20-pin ATX 電源。為了使用 20-pin ATX 電源 , 請順

著 Pin 1 和 Pin 13 插上電源接頭。

12 24

20-Pin ATX 電源安裝說明

1 13

ATX 12V 電源接口

(8 針 ATX12V1)

( 見第 2 頁第 1 項 )

8 5

4 1

請將 ATX 12V 電源供應器連接到

這個接頭。

雖然此主機板提供 8-pin ATX 12V 電源接口 , 但是您仍然可以使用傳統的

4-pin ATX 12V 電源。為了使用 4-pin ATX 12V 電源 , 請

8 5

順著 Pin 1 和 Pin 5 插上電源接頭。

SLI/XFIRE 電源接頭

(4 針 SLI/XFIRE_POWER1)

( 見第 2 頁第 43 項 )

4-Pin ATX 12V 電源安裝說明

SLI/XFIRE_POWER1

4 1

一般不需要使用這個接頭，但是

如果主機板上同時插入兩張顯示

卡時，請將它連接到硬碟電源接

口。

IEEE 1394 接口

(9 針 FRONT_1394)

( 見第 2 頁第 31 項 )

RXTPAM_0

GND

+12V

GND

1

+12V

RXTPBP_0

GND

RXTPAP_0

除了位於 I/O 面板的一個默認

IEEE 1394 接口之外，這款主機

板有一組 IEEE 1394 接針。這組

IEEE 1394 接針可支援一個 IEEE

1394 接口。

序列埠

(9 針 COM1)

( 見第 2 頁第 33 項 )

這個序列埠 COM1 支援一個序列

埠的裝置。

HDMI_SPDIF 接頭

(2 針 HDMI_SPDIF1)

( 見第 2 頁第 34 項 )

1

GND

SPDIFOUT

HDMI_SPDIF 接頭，提供 SPDIF

音效輸出至 HDMI 顯示卡，支援

將電腦連接至帶 HDMI 的數位電

視 / 投影機 / 液晶銀幕等設備。

請將 HDMI 顯示卡的 HDMI_SPDIF

接口連接到這個接頭。

197


198

1.5 快速開關

本主機板有三個快速開關 : 電源開關 , 重置開關與 C M O S 數據清除開關 , 可讓用戶快

速開啟 / 關閉或重置系統 , 或者清除 CMOS 中的數據。

電源開關

(PWRBTN)

( 見第 2 頁第 18 項 )

電源開關是一種快速開關 , 可

讓用戶快速開啟 / 關閉系

統。

重置開關

(RSTBTN)

( 見第 2 頁第 17 項 )

重置開關是一種快速開關 , 可

讓用戶快重置系統。

CMOS 數據清除開關

(CLRCBTN)

( 見第 3 頁第 17 項 )

CMOS 數據清除開關是一種快

速開關 , 可讓用戶快速清除

CMOS 中的數據。

2. BIOS 訊息

主板上的 Flash Memory 晶片存儲了 BIOS 設置程序。啟動系統，在系統開機自檢 (POST)

的過程中按下 <F2> 或 <Del> 鍵，就可進入 BIOS 設置程序，否則將繼續進行開機自檢

之常規檢驗。如果需要在開機自檢後進入 BIOS 設置程序，請按下 <Ctl> + <Alt> +

<Delete> 鍵重新啟動電腦，或者按下系統面板上的重開按鈕。功能設置程序儲存有主

板自身的和連接在其上的設備的缺省和設定的參數。這些訊息用於在啟動系統和系統

運行需要時，測試和初始化元件。有關 B I O S 設置的詳細訊息，請查閱隨機支援光碟

裡的使用手冊 (PDF 文件 )。

3. 支援光碟訊息

本主板支援各種微軟 Windows

®

操作系統：Microsoft

®

Windows

®

7/7 64 位元 /

Vista

TM

/Vista

TM

64 位元 /XP/XP 64 位元。主板附帶的支援光碟包含各種有助於提高主

板效能的必要驅動和實用程式。請將隨機支援光碟放入光碟機裡，如果系統的“自動

運行＂功能已啟用，銀幕將會自動顯示主菜單。如果主菜單不能自動顯示，請查閱支

援光碟內 BIN 文件夾下的 ASSETUP.EXE 文件並雙點它，即可調出主菜單。


1. Penjelasan

Terima kasih telah membeli motherboard ASRock Z77 WS, motherboard andal yang diproduksi berdasarkan kontrol kualitas tinggi ASRock secara konsisten. Motherboard ini memberikan performa terbaik dengan desain yang kokoh sesuai komitmen

ASRock untuk kualitas dan daya tahan.

Panduan Pemasangan Ringkas ini berisi pendahuluan tentang motherboard dan panduan pemasangan langkah demi langkah. Informasi lengkap lainnya tentang motherboard ini tersedia di buku panduan yang diberikan bersama Support CD (CD

Pendukung).

dalam buku pedoman ini akan mengikuti perubahan tanpa peringatan. Dalam kondisi terjadinya modifi kasi buku pedoman ini, versi baru akan diperlihatkan dalam website ASRock tanpa peringatan lebih. Anda dapat mendapatkan kartu- kartu yang paling baru dan daftar bantuan CPU pada website ASRock.

Website ASRock http://www.asrock.com

1.1 Isi Paket

Papan Induk Z77 WS ASRock

(Faktor Form ATX: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

Pemimpin Instalasi Cepat Z77 WS ASRock

Support CD Z77 WS ASRock

6 x Kabel satu serial Data ATA (SATA) (bebas-pilih)

1 x Kabel Power Satu Serial ATA (SATA) HDD (bebas-pilih)

1 x Satu Pelindung I/O

2 x Kartu ASRock SLI_Bridge

1 x Kartu ASRock SLI_Bridge_3S

1 x Kartu ASRock 3-Way SLI Bridge

ASRock Mengingatkan...

Untuk mendapatkan performa lebih baik di Windows ® 7/ 7 64-bit/ Vista TM /

Vista

TM

64-bit, sebaiknya atur pilihan BIOS dalam Storage Confi guration

(Konfi gurasi Penyimpanan) ke mode AHCI. Untuk konfi gurasi BIOS, lihat

“Panduan Pengguna” dalam CD dukungan kami untuk informasi rinci.


199

1.2 Spesifi kasi

200

Podium

CPU

Grup Chip

Ingatan

Alur Ekspansi

- Faktor Form ATX: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm

- Desain Kapasitor Warna Emas Premium (100% Kapasitor

Polimer Konduktif buatan Jepang berkualitas tinggi)

- Mendukung Intel ® Core TM i7 / i5 / i3 Generasi Ke-3 dan Ke-2

dalam Paket LGA1155

- Digi Power Desain

- Desain daya 8 + 4 fase

- Menggunakan Teknologi Intel ® Turbo Boost 2.0

- Mendukung CPU K-Series jenis “unlocked”

- Intel ® Z77

- Mendukung Intel ® Rapid Start Technology dan Smart

Connect Technology

- Teknologi ingatan DDR3 dwisaluran

- 4 x Alur DDR3 DIMM

- Mendukung memori DDR3 3000+(OC)/2400(OC)/2133(OC)

/1866(OC)/1600/1333/1066 non-ECC yang tidak di-buffer

- Kapasitas paling banyak: 32GB

- Mendukung Intel ® Extreme Memory Profi le (XMP)1.3/1.2

- 5 x slot PCI Express 3.0 x16 (PCIE2: x16 mode atau PCIE1/

PCIE3/PCIE5/PCIE7: x16/0/16/0 atau x8/8/8/8 mode )

* PCIE 3.0 hanya didukung dengan Intel ® Ivy Bridge CPU.

Dengan Intel ® Sandy Bridge CPU, hanya PCIE 2.0 yang

didukung.

- 1 x PCI Express 2.0 x16 slot (PCIE4: x4 mode)

- 1 x PCI Express 2.0 x1 slot

- Mendukung AMD Quad CrossFireX TM , 4-Way CrossFireX TM ,

3-Way CrossFireX TM dan CrossFireX TM

- Mendukung NVIDIA ® Quad SLI TM , 4-Way SLI TM , 3-Way SLI TM

dan SLI TM

dapat didukung dengan prosesor yang mengintegrasikan

GPU.

- Mendukung Intel ® HD Graphics Built-in Visuals: Intel ® Quick



- Pixel Shader 5.0, DirectX 11 dengan Intel ® Ivy Bridge CPU,

Pixel Shader 4.1, DirectX 10.1 dengan Intel ® Sandy Bridge

CPU

- Ingatan sama Max. 1760MB


I/O

- Mendukung HDMI 1.4a Technology dengan resolusi

maksimal hingga 1920x1200 @ 60Hz

- Mendukung Auto Lip Sync, Deep Color (12bpc), xvYCC dan

HBR (High Bit Rate Audio) dengan HDMI (memerlukan

monitor HDMI yang kompatibel)

- Mendukung fungsi HDCP dengan port HDMI

- Mendukung pemutaran 1080p Blu-ray (BD) / HD-DVD

dengan port HDMI

Audio

LAN

- 7.1 CH HD Audio dengan Content Protection


- Menggunakan Premium Blu-ray audio


Penyimpanan

- Broadcom BCM57781

- Menggunakan Wake-On-LAN

- Mendukung Energy Effi cient Ethernet 802.3az

- Mendukung Dual LAN dengan fungsi Teaming

- Mendukung PXE

- 2 x penghubung Intel ® Z77 SATA3 6.0Gb/s, dapat digunakan


Storage dan Intel Smart Response Technology), NCQ, AHCI

dan fungsi fungsi “Hot Plug”

- 4 x penghubung ASMedia ASM1061 SATA3 6.0Gb/s, dapat

digunakan NCQ, AHCI dan fungsi fungsi “Hot Plug”

(konektor SATA3_A4 dibagi dengan port eSATA3)

- 4 x penghubung Intel ® Z77 SATA2 3.0Gb/s, dapat digunakan


Storage dan Intel Smart Response Technology), NCQ, AHCI

dan fungsi fungsi “Hot Plug”

Papan Belakang I/O Panel

- 1 x Port Keyboard/Mouse PS/2

- 1 x Port HDMI

- 1 x Port Keluaran Optical SPDIF

- 2 x Port USB 2.0 siap-dipakai

- 1 x Port eSATA3

- 8 x Port USB 3.0 siap-dipakai

- 2 x RJ-45 LAN Port LED (ACT/LINK LED dan SPEED LED)

- 1 x Tombol Clear CMOS dengan LED

- 1 x Port IEEE 1394

- HD Audio Jack: Penyuara Belakang/Pusat/Bass/Line in/

Penyuara Depan/mikropon

201


202

Ciri-ciri BIOS

USB 3.0

Penghubung

Sokongan CD

Penjaga

Hardware

- 4 x Port Belakang USB 3.0 dari Intel ® Z77, mendukung

USB 1.0/2.0/3.0 hingga 5Gb/s

- 4 x Port Belakang USB 3.0 dari Etron EJ188, mendukung

USB 1.0/2.0/3.0 hingga 5Gb/s

- 2 x Port Depan USB 3.0 dari Etron EJ188 (menggunakan 4

port USB 3.0), mendukung USB 1.0/2.0/3.0 hingga 5Gb/s

- 1 x IR header

- 1 x CIR header

- 1 x port header COM

- 1 x HDMI_SPDIF header

- 1 x IEEE 1394 header

- 1 x header power LED

- 2 x Penghubung KIPAS CPU (1 x 4-pin, 1 x 3-pin)

- 3 x Penghubung KIPAS casis (1 x 4-pin, 2 x 3-pin)

- 1 x Penghubung KIPAS power (3-pin)

- Penghubung power 24 pin ATX

- Penghubung power 8 pin 12V

- Penghubung power SLI/XFire

- Penghubung audio panel dapan

- 2 x USB 2.0 header (menggunakan 4 port USB 2.0)

- 1 x USB 3.0 header (menggunakan 2 port USB 3.0)

- 1 x Dr. Debug

- 1 x kuasa beralih LED

- 1 x ulang beralih LED

- 1 x Clear CMOS LED

- 64Mb AMI UEFI Legal BIOS dengan dukungan GUI

- Menggunakan “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Menggunakan jumperfree

- Penyokong AMBIOS 2.3.1

- Penyesuaian berbagai tegangan CPU Core, IGPU, DRAM,

1.8V PLL, VTT, VCCSA

- Driver, Utilitas, Perangkat Lunak Antivirus (Versi

Percobaan), CyberLink MediaEspresso 6.5 Versi

Percobaan, ASRock MAGIX Multimedia Suite - OEM

- Perasa Suhu CPU

- Perasa Suhu Casis

- Pengukur Kipas CPU/casis/power

- Kipas CPU/Sasis Senyap (Kecepatan Kipas Sasis Otomatis

Disesuaikan Berdasarkan Temperatur CPU)

- Kontrol Multi-Kecepatan Kipas CPU/casis


OS

- Penjagaan voltasi: +12V, +5V, +3.3V, Vcore

- dapat digunakan Microsoft ® Windows ® 7 / 7 64-bit / Vista TM /

Vista TM 64-bit / XP / XP 64-bit

Sertifi kasi - FCC, CE, WHQL

- ErP/EuP Ready (memerlukan catu daya ErP/EuP ready)

* Untuk informasi rinci, silakan kunjungi website kami: http://www.asrock.com


203

Installing OS on a HDD Larger Than 2TB in AHCI Mode

This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system.

1. Please make sure to use Windows ® Vista TM 64-bit (with SP2 or above) or

Windows ® 7 64-bit (with SP1 or above).

2. Press <F2> or <Delete> at system POST. Set AHCI Mode in UEFI Setup Utility >

Advanced > Storage Confi guration > SATA Mode.

3. Choose the item “UEFI:xxx“ to boot in UEFI Setup Utility > Boot > Boot Option #1.

(“xxx” is the device which contains your Windows ® installation fi les. Normally it is

an optical drive.) You can also press <F11> to launch boot menu at system POST

and choose the item “UEFI:xxx“ to boot.

4. Start Windows ® installation.

204


Installing OS on a HDD Larger Than 2TB in RAID Mode

This motherboard adopts UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow the procedures below to install the operating system.

1. Please make sure to use Windows ® Vista TM 64-bit (with SP2 or above) or

Windows ® 7 64-bit (with SP1 or above).

2. Copy Intel ® RAID drivers into a USB fl ash disk. You can download the driver from

ASRock's website and unzip the fi le into a USB fl ash disk OR copy the fi le from

ASRock motherboard support CD. (please copy the fi les under following directory:

32 bit: ..\i386\Win7_Vista_Intel..

64-bit: ..\AMD64\Win7-64_Vista64_Intel..

3. Create RAID array for you system. Please refer to "Intel RAID Installation Guide"

fi le for details.

4. Install Windows ® Vista TM 64-bit / 7 64-bit:

A. Insert your Windows ® Vista TM 64-bit / 7 64-bit installation disc to the optical

drive.

B. Press <F11> to launch boot menu at system POST and choose the item

“UEFI:xxx“ to boot.

C. Start Windows ® Installation. When you see “Where do you want to install

Windows?” page, please click “Load Driver”.

D. Plug the USB fl ash disk into your USB port; select “Browse” to fi nd the RAID

driver. Then choose the directory (xx\AMD64\) you have copied in the fi rst

step.


205

E. Please keep the USB fl ash disk installed until the system fi rst reboot.

F. Continue to install OS by following the Windows ® instructions.

5. Follow Windows ® Installation Guide to install OS.

If you install Windows ® 7 64-bit / Vista TM 64-bit in a large hard disk (ex. Disk volume > 2TB), it may take more time to boot into Windows ® or install driver/ utilities. If you encounter this problem, you will need to following instructions to fi x this problem.

Windows ® Vista TM 64-bit:

Microsoft ® does not provide hotfi x for this problem. The steps listed below are Microsoft ® 's suggested solution:

A. Disable System Restore.

a. Type “systempropertiesprotection” in the Start Menu. Then press

"Enter".

206

b. De-select Local Disks for System Restore. Then Click “Turn System

Restore Off” to confi rm. Then Press “Ok”.


B. Disable “Volume Shadow Copy” service.

a. Type “computer management” in the Start Menu, then press “Enter”.

b. Go to “Services and Applications>Services”; Then double click “Volume

Shadow Copy”.


207

c. Set “Startup type” to “Disable” then Click “OK”.


D. After reboot, please start to install motherboard drivers and utilities.

Windows ® 7 64-bit:

A. Please request the hotfi x KB2505454 through this link:

http://support.microsoft.com/kb/2505454/

B. After installing Windows ® 7 64-bit, install the hotfi x kb2505454.

(This may take a long time; >30 mins.)

C. Reboot your system. (It may take about 5 minutes to reboot.)

D. Windows ® will install this hotfi x then reboot by itself.

E. Please start to install motherboard drivers and utilities.

6. Finish.

208


ASRock Z77 WS Motherboard Quick Installation Guide

Assistant Bot

Copyright Notice:

Disclaimer:

Motherboard Layout

Intel

Z77

I/O Panel

1. Introduction

1.1 Package Contents

1.2 Specifi cations

CAUTION!

1.3 Unique Features

2. Installation

2.1 Screw Holes

2.2 Pre-installation Precautions

2.3 CPU Installation

2.4 Installation of CPU Fan and Heatsink

2.5 Installation of Memory Modules (DIMM)

Installing a DIMM

2.6 Expansion Slots (PCI Express Slots)

Installing an expansion card

2.7 SLI

, 3-Way SLI

, 4-Way SLI

and Quad SLI

Operation

Guide

2.7.1 Graphics Card Setup

2.7.1.1 Installing Two SLI

-Ready Graphics Cards

2.7.1.2 Installing Three SLI

-Ready Graphics Cards

2.7.1.3 Installing Four SLI

-Ready Graphics Cards

2.7.2 Driver Installation and Setup

2.8 CrossFireX

, 3-Way CrossFireX

, 4-Way CrossFireX

and Quad CrossFireX

Operation Guide

2.8.1 Graphics Card Setup

2.8.1.1 Installing Two CrossFireX

-Ready Graphics Cards

2.8.1.2 Installing Three CrossFireX

-Ready Graphics Cards

2.8.1.3 Installing Four CrossFireX

-Ready Graphics Cards

2.8.2 Driver Installation and Setup

2.9 Jumpers Setup

2.10 Onboard Headers and Connectors

2.11 Smart Switches

2.12 Dr. Debug

2.13 Driver Installation Guide

2.14 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit

With RAID Functions

2.15 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit /

XP / XP 64-bit Without RAID Functions

2.15.1 Installing Windows

XP / XP 64-bit Without RAID

Functions

2.15.2 Installing Windows

7 / 7 64-bit / Vista

/ Vista

64-bit

Without RAID Functions

2.16 Teaming Function Operation Guide

3. BIOS Information

4. Software Support CD information

1. Einführung

1.1 Kartoninhalt

1.2 Spezifi kationen

1.3 Einstellung der Jumper

1.4 Integrierte Header und Anschlüsse

１．はじめに

3．ソフトウェアサポート CD 情報