Biostar 865GV Owner's Manual

Biostar 865GV Owner's Manual
865G Mirco 775 / 865GV Micro 775
Setup Manual
FCC Information and Copyright
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses and can radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The vendor makes no representations or warranties with respec t to the
contents here and s pecially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction ............................................. 1
1.1
1.2
1.3
1.4
1.5
1.6
Before You Start................................................................... 1
Package Checklist................................................................ 1
Motherboard Features.......................................................... 2
Rear Panel Connectors.......................................................... 3
Motherboard Layout of 865G Micro 775.................................. 4
Motherboard Layout of 865GV Micro 775................................ 5
Chapter 2: Hardware Installation.............................. 6
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU) ................................ 6
FAN Headers........................................................................ 8
Installing System Memory...................................................... 9
Connectors and Slots ............................................................11
Chapter 3: Headers & Jumpers Setup .....................14
3.1
3.2
How to Setup Jumpers..........................................................14
Detail Settings.....................................................................14
Chapter 4: Useful Help .............................................20
4.1
4.2
4.3
4.4
Driver Installation Note .......................................................20
Award BIOS Beep Code........................................................21
Extra Information................................................................21
Troubleshooting...................................................................23
Chapter 5: WarpSpeeder™ .......................................24
5.1
5.2
5.3
5.4
Introduction........................................................................24
System Requirement............................................................24
Installation .........................................................................25
WarpSpeeder™....................................................................26
Appendencies: SPEC In Other Language ................32
German................................................................................................32
France..................................................................................................34
Italian..................................................................................................36
Spanish ................................................................................................38
Portuguese...........................................................................................40
Polish...................................................................................................42
RUSSIAN...............................................................................................44
ARABIC................................................................................................46
JAPANESE............................................................................................48
865G Micro 775 & 865GV Micro 775
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
„ Prepare a dry and stable work ing environment with
sufficie nt lighting.
„ Always disconne ct the compute r from powe r outle t
be fore ope ration.
„ Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
„
„
1.2
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.
PACKAGE CHECKLIST
FDD Cable X 1
HDD Cable X 1
Rear I/O Panel for ATX Case X 1
Use r’s Manual X 1
Fully Se tup Drive r C D X 1
Se rial ATA Cable X 1 (optional)
Se rial ATA Powe r Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF out Cable X 1 (optional)
1
Motherboard Manual
1.3
MOT HERBOARD FEAT URES
865G Micro 775
865GV Micro 775
LGA 775
Intel Pentium 4 / Pentium D / Celeron D
processor up to 3.4 GHz
CPU
Intel Core2Duo Processor (For Ver 8.x only)
Supports Hyper-Threading
Intel Pentium 4 / Pentium D / Celeron D
processor up to 3.4 GHz
Supports Hyper-Threading
Execute Disable Bit
Execute Disable Bit
Enhanced Intel SpeedStep
Enhanced Intel SpeedStep
Extended Memory 64 Technology
Extended Memory 64 Technology
FSB
LGA 775
533 / 800 MHz
533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
Max Shared Video Memory is 64MB
Max Shared Video Memory is 64MB
ITE IT8712F
ITE IT8712F
H/W Monitor
H/W Monitor
Fan Speed Controller
Fan Speed Controller
ITE's "Smart Guardian" function
ITE's "Smart Guardian" function
DIMM Slots x 2
DIMM Slots x 2
Each DIMM supports 128/256/512MB & 1GB
Each DIMM supports 128/256/512MB & 1GB
Main
DDR
DDR
Memory
Max Memory Capicity 2GB
Max Memory Capicity 2GB
Dual Channel Mode DDR memory module
Dual Channel Mode DDR memory module
Supports DDR 266 / 333 / 400
Supports DDR 266 / 333 / 400
Integrated IDE Controller
Integrated IDE Controller
Ultra DMA 33~100 Bus Master Mode
Ultra DMA 33~100 Bus Master Mode
supports PIO Mode 0~4,
supports PIO Mode 0~4,
Integrated Serial ATA Controller
Integrated Serial ATA Controller
Data transfer rates up to 1.5 Gb/s.
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification compliant.
SATA Version 1.0 specification compliant.
Realtek RTL 8100C
Realtek RTL 8100C
Chipset
Graphics
Super I/O
IDE
SATA
10 / 100 Mb/s auto negotiation
10/100 LAN 10 / 100 Mb/s auto negotiation
Sound
Codec
Slots
2
Half / Full duplex capability
Half / Full duplex capability
ALC655 / 658
ALC655 / 658
5.1 channels audio out
5.1 channels audio out
AC’97 Version 2.3
AC’97 Version 2.3
AGP 8X graphics slot
x1
XGP graphics slot
x1
PCI slot
x3
PCI slot
x3
865G Micro 775 & 865GV Micro 775
865G Micro 775
865GV Micro 775
Floppy connector
x1
Floppy connector
x1
IDE Connector
x2
IDE Connector
x2
SATA Connector
x2
SATA Connector
x2
Front Panel Connector
x1
Front Panel Connector
x1
Front Audio Connector
x1
Front Audio Connector
x1
CD-in Connector
x1
CD-in Connector
x1
On Board
S/PDIF in connector (optional)
x1
S/PDIF in connector (optional)
x1
Connector
S/PDIF out connector
x1
S/PDIF out connector
x1
CPU Fan header
x1
CPU Fan header
x1
System Fan header
x1
System Fan header
x1
Clear CMOS header
x1
Clear CMOS header
x1
USB connector
x2
USB connector
x2
Power Connector (20pin)
x1
Power Connector (20pin)
x1
Power Connector (4pin)
x1
Power Connector (4pin)
x1
PS/2 Keyboard
x1
PS/2 Keyboard
x1
PS/2 Mouse
x1
PS/2 Mouse
x1
Serial Port
x1
Serial Port
x1
x1
Printer Port
x1
VGA port
x1
VGA port
x1
LAN port
x1
LAN port
x1
USB Port
x4
USB Port
x4
Audio Jack
x3
Audio Jack
x3
Back Panel Printer Port
I/O
Board Size 215 (W) x 235 (L) mm
215 (W) x 235 (L) mm
Windows 2000 / XP
Windows 2000 / XP
OS Support Biostar Reserves the right to add or remove
support for any OS with or without notice.
support for any OS with or without notice.
1.4
Biostar Reserves the right to add or remove
REAR PANEL CONNECT ORS
PS/ 2
Mo use
Print er Po rt
L AN
L in e In/
Su rrou nd
Line Out
Mic I n 1/
Bass/ Ce nte r
PS/ 2
Ke yb oard
USBX2
COM 1
VGA1
U SBX2
3
Motherboard Manual
1.5
MOT HERBOARD LAYOUT OF 865G MICRO 775
(Fo rall the other versions.)
JKBM S1
JATXPWR2
JATXPWR1
LGA775
JUSB1
COM1
JCOM1
FD D1
CPU1
DD RA1
JPRNT1
(For Ver. 8.x.)
JVGA1
JATXPWR2
JUSBLAN1
IDE2
Intel
865G
IDE1
JCFAN1
JUSBV2
(optional)
JAUD IO 1
JAUDI O2
LAN
AGP1
BAT1
PCI1
Code c
(Optional)
JSPDI F_IN1
SATA2
JSPDIF _OUT1
JUSB2
JCDIN1
PC I2
JUSB3
ICH5
SATA1
JUSBV3_4
(opt ional)
JSFAN1 JCMOS1
PC I3
BIO S
JPANEL1
Not e: ■ represe nts the 1st pin.
4
865G Micro 775 & 865GV Micro 775
1.6
MOT HERBOARD LAYOUT OF 865GV MICRO 775
JKBM S1
JATXPWR2
JATXPWR1
LGA775
JUSB1
COM1
JCOM1
FD D1
CPU1
DD RA1
JPRNT1
JVGA1
JUSBLAN1
IDE2
Intel
865GV
IDE1
JCFAN1
JAUD IO 1
JAUDI O2
LAN
XGP1
BAT1
Code c
PCI1
(Optional)
JSPDI F_IN1
SATA2
JSPDIF _OUT1
JUSB2
JUSB3
JCDIN1
ICH5
SATA1
PC I2
JSFAN1 JCMOS1
PC I3
BIO S
JPANEL1
Not e: ■ represe nts the 1st pin.
5
Motherboard Manual
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Pin Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
6
865G Micro 775 & 865GV Micro 775
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:
Step 2-2:
Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.
7
Motherboard Manual
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Heade r
1
4
Pin
JCFAN1
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
JSFAN1: System Fan He ader
Pin
1
2
3
1
3
Assignment
Ground
+12V
FAN RPM rate
sense
JSFAN1
Note:
The JSFAN1 s upport 3-pi n head connec tor. When c onnecti ng with wires onto connec tors,
pleas e note that the red wire is the positi ve and s hould be c onnected to pin#2, and the
blac k wire is Ground and s hould be c onnected to GND.
8
865G Micro 775 & 865GV Micro 775
2.3
INST ALLING SYST EM MEMORY
DDRA1
DDRB1
A. Memory Modules
1.
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket
Location
DDR Module
DDRA1
256MB/512MB/1GB *1
DDRB1
256MB/512MB/1GB *1
Total Memory Size
Max is 2GB.
9
Motherboard Manual
C. Dual Channel Memory installation
To trigger the Dual Channel f unction of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pair, shown in the following table.
DDRA1
O
DDRB1
X
Disabled
X
O
Enabled
O
O
Dual Channel Status
Disabled
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
10
865G Micro 775 & 865GV Micro 775
2.4
CONNECT ORS AND SLOT S
FDD1: Floppy Disk Conne ctor
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.
34
2
33
1
IDE1/IDE2: Hard Disk Conne ctors
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality. It has two HDD
connectors IDE1 (primary) and IDE2 (secondary).
The IDE connectors can connect a master and a slav e driv e, so you can
connect up to four hard disk drives. The f irst hard drive should always be
connected to IDE1.
40
2
IDE2
39
1
IDE1
11
Motherboard Manual
PCI1~PCI3: Pe riphe ral Component Interconne ct Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
PCI3
AGP1: Accele rate d Graphics Port Slot ( 865G Micro 775 only )
Your monitor will attach directly to that video card. This motherboard supports
video cards for PCI slots, but it is also equipped with an Accelerated Graphics
Port (AGP). An AGP card will take adv antage of AGP technology for improv ed
video efficiency and perf ormance, especially with 3D graphics.
AGP
12
865G Micro 775 & 865GV Micro 775
XGP1: Xtreme Graphics Port Slot ( 865GV Micro 775 only )
This XGP (Extreme Graphics Port) slot is a special design that only supports
compatible AGP VGA cards.
To install the system with an add-on AGP VGA card, please make sure to install
the driver of add-on AGP VGA card before onboard VGA driv er installation. If the
onboard VGA driver has already been installed bef ore you install the add-on
AGP VGA card, the system will automatically set the onboard VGA as the
primary graphics adapter.
For the onboard VGA driver can’t be remov ed completely, and to solv e this
problem, please follow the steps below,
1. Disable onboard VGA utility under the operating system, and reboot PC. After
PC restarts, the system will automatically set the AGP VGA card as the
graphics adapter.
2. Or, re-install your operating system to ensure the AGP VGA card function can
be used.
Note:
Please go to “http://www.biostar.com.tw” for more detailed information about
XGP compatible AGP cards.
XGP
13
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DET AIL SETT INGS
JPANEL1: Front Panel Heade r
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep
button and speaker connection. It allows user to connect the PC case’s f ront
panel switch functions.
SLP
PWR_LED
On/Off
+ + -
9
1
+ SPK
Pin
1
2
3
4
5
6
7
8
14
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Functio n
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
16
8
RST
HLED
Assignment
Sleep control
Ground
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Functio n
Sleep button
N/A
Power LED
Power-on button
865G Micro 775 & 865GV Micro 775
JATXPWR1: ATX Powe r Source Conne ctor
This connector allows user to connect 20-pin power connector on the ATX
power supply.
10
1
20
11
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage
+5V
+12V
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
-5V
+5V
+5V
JATXPWR2: ATX Powe r Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.
1
3
2
4
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
15
Motherboard Manual
JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
2
1
10
9
JUS B2 JUS B3
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
Pin
1
2
3
4
5
6
7
8
9
10
JUSBV2/JUSBV3_4: Powe r Source Heade rs for USB Ports
(O ptional for 865G Micro 775)
Pin 1-2 Close:
JUSBV2/JUSBV3_4: +5V f or USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV2/JUSBV3_4: USB ports at front panel (JUSB2/JUSB3) are powered
by +5V standby voltage.
3
1
3
1
1
3
Pin 1-2 close
JUSBV2
1
3
JUSBV3_4
3
1
3
1
Pin 2-3 close
Note:
In order to support this func tion “Power-On s ys tem via U SB device,
“JUSBV2/JUSBV3_4” jumper cap shoul d be pl aced on Pin 2-3 i ndi viduall y.
16
865G Micro 775 & 865GV Micro 775
JAUDIO 2: Front Panel Audio Heade r
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.
Pin
1
2
3
4
5
6
7
8
9
2
14
1
13
10
11
12
13
14
Assignment
Mic in/center
Ground
Mic power/Bass
Audio power
Right line out/
Speaker out
Right
Right line out/
Speaker out
Right
Reserved
Key
Left line out/
Speaker out Left
Left line out/
Speaker out Left
Right line in/
Rear speaker
Right
Right line in/
Rear speaker
Right
Left line in/
Rear speaker Left
Left line in/
Rear speaker Left
JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..
Pin
1
4
1
2
3
4
Assignment
Left Channel
Input
Ground
Ground
Right Channel
Input
17
Motherboard Manual
JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Proce dures:
1.
2.
3.
4.
5.
6.
Remov e AC power line.
Set the jumper to “Pin 2-3 close”.
Wait f or f ive seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset y our desired password or clear the CMOS data.
JSATA1~JSATA2: Se rial ATA Connectors
The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.
1
4
7
SATA2
SATA1
18
Pin
1
2
3
4
5
6
7
Assignment
Ground
T X+
T XGround
RXRX+
Ground
865G Micro 775 & 865GV Micro 775
JSPDIF_O UT1: Digital Audio-out Conne ctor
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
1
2
3
3
Assignment
+5V
SPDIF_OUT
Ground
1
JSPDIF_IN1 (optional): Digital Audio-in Conne ctor
This connector allows user to connect the PCI bracket SPDIF input header.
Pin
1
2
3
3
Assignment
+5V
SPDIF_IN
Ground
1
19
Motherboard Manual
CHAPTER 4: USEFUL HELP
4.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you ins ert the Driver CD, please use file brows er to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
20
865G Micro 775 & 865GV Micro 775
4.2
AWARD BIOS BEEP CODE
Beep Sound
One long beep followed by two short
beeps
High-low siren sound
Meaning
Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
4.3
No DRAM detected or install
EXT RA INFORMAT ION
A. BIOS Update
After you fail to update BIOS or BIOS is invaded by virus, the
Boot-Block function will help to restore BIOS. If the following message
is shown after boot-up the system, it means the BIOS contents are
corrupted.
In this Case, please follow the procedure below to restore the BIOS:
1. Make a bootable floppy disk.
2. Download the Flash Utility “AWDFLASH.exe” from the Biostar
website: www.biostar.com.tw
3. Confirm motherboard model and download the respectively BIOS
from Biostar website.
4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.
5. Insert the bootable disk into floppy drive and press Enter.
6. System will boot-up to DOS prompt.
7. Type “Awdflash xxxx.bf/sn/py/r” in DOS prompt.
(xxxx means BIOS name.)
8. System will update BIOS automatically and restart.
9. The BIOS has been recovered and will work properly.
21
Motherboard Manual
B. CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU
0protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
22
865G Micro 775 & 865GV Micro 775
4.4
TROUBLESHOOT ING
Probable
Solution
1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light don’t illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
1.
System does not boot from hard disk
1.
driv e, can be booted f rom optical driv e.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
System only boots f rom optical driv e.
f iles.
Hard disk can be read and applications
can be used but booting from hard disk 2.
Ref ormat the hard driv e.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.”
correct inf ormation is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard driv e.
correctly.
2.
Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
23
Motherboard Manual
CHAPTER 5: WARPSPEEDER™
5.1
INT RODUCT ION
[WarpSpeeder™], a new powerful control utility, features three
user-friendly functions including Overclock Manager, Overvoltage
Manager, and Hardware Monitor.
With the Overclock Manager, users can easily adjust the frequency they
prefer or they can get the best CPU performance with just one click. The
Overvoltage Manager, on the other hand, helps to power up CPU core
voltage and Memory voltage. The cool Hardware Monitor smartly indicates
the temperatures, voltage and CPU fan speed as well as the chipset
information. Also, in the About panel, you can get detail descriptions about
BIOS model and chipsets. In addition, the frequency status of CPU,
memory, AGP and PCI along with the CPU speed are synchronically
shown on our main panel.
Moreover, to protect users' computer systems if the setting is not
appropriate when testing and results in system fail or hang,
[WarpSpeeder™] technology assures the system stability by automatically
rebooting the computer and then restart to a speed that is either the
original system speed or a suitable one.
5.2
SYST EM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP
DirectX: DirectX 8.1 or above. (The Windows XP operating system
includes DirectX 8.1. If you use Windows XP, you do not need to install
DirectX 8.1.)
24
865G Micro 775 & 865GV Micro 775
5.3
INST ALLAT ION
1. Execute the setup execution file, and then the following dialog will pop
up. Please click “Next” button and follow the default procedure to
install.
2. When you see the following dialog in setup procedure, it means setup
is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox
is checked, the Tray Icon utility and [WarpSpeeder™] utility will be
automatically and immediately launched after you click “Finish”
button.
Usage :
The following figures are just only for reference, the screen printed in
this user manual will change according to your motherboard on hand.
25
Motherboard Manual
5.4
WARPSPEEDER™
1. Tray Icon:
Whenever the Tray Icon utility is launched, it will display a little tray
icon on the right side of Windows Taskbar.
This utility is responsible for conveniently invoking [WarpSpeeder™]
Utility. You can use the mouse by clicking the left button in order to
invoke [WarpSpeeder™] directly from the little tray icon or you can
right-click the little tray icon to pop up a popup menu as following
figure. The “Launch Utility” item in the popup menu has the same
function as mouse left-click on tray icon and “Exit” item will close
Tray Icon utility if selected.
26
865G Micro 775 & 865GV Micro 775
2. Main Panel
If you click the tray icon, [WarpSpeeder™] utility will be invoked.
Please refer to the following figure; the utility’s first window you will
see is Main Panel.
Main Panel contains fe ature s as follows:
a.
b.
c.
Display the CPU Speed, CPU external clock, Memory clock, AGP clock,
and PCI clock information.
Contains About, Voltage, Overclock, and Hardware Monitor Buttons for
invoking respective panels.
With a user-friendly Status Animation, it can represent 3 overclock
percentage stages:
Man walking→overclock percentage from 100% ~ 110 %
Panther running→overclock percentage from 110% ~ 120%
Car racing→overclock percentage from 120% ~ above
27
Motherboard Manual
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted
and the Voltage Panel will slide out to up as the following figure.
In this panel, you can decide to increase CPU core voltage and
Memory voltage or not. The default setting is “No”. If you want to get
the best performance of overclocking, we recommend you click the
option “Yes”.
28
865G Micro 775 & 865GV Micro 775
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be
highlighted and the Overclock Panel will slide out to left as the
following figure.
O ve rclock Panel contains the these features:
a.
“–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”:
provide user the ability to do real-time overclock adjustment.
Warning:
Manually overclock is potentially dangerous, especially when the
ov erclocking percentage is over 110 %. We strongly recommend you
v erify ev ery speed you overclock by click the Verify button. Or, you can
just click Auto ov erclock button and let [WarpSpeeder™] automatically
gets the best result f or y ou.
b.
“Recovery Dialog button”: Pop up the following dialog. Let user select
a restoring way if system need to do a fail-safe reboot.
29
Motherboard Manual
c.
“Auto-overclock button”: User can click this button and
[WarpSpeeder™] will set the best and stable performance and
frequency automatically. [WarpSpeeder™] utility will execute a
series of testing until system fail. Then system will do fail-safe
reboot by using Watchdog function. After reboot, the
[WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
d.
“Verify button”: User can click this button and [WarpSpeeder™]
will proceed a testing for current frequency. If the testing is ok,
then the current frequency will be saved into system registry. If
the testing fail, system will do a fail-safe rebooting. After reboot,
the [WarpSpeeder™] utility will restore to the hardware default
setting or load the verified best and stable frequency according
to the Recovery Dialog’s setting.
Note:
Because the testing programs, invoked in Auto-overclock and Verify,
include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or
newer runtime library is required. And please make sure y our display
card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is
required f or Direct3D rendering.
5. Hardware Monitor Panel
Click the Hardware Monitor button in Main Panel, the button will be
highlighted and the Hardware Monitor panel will slide out to left as
the following figure.
In this panel, you can get the real-time status information of your
system. The information will be refreshed every 1 second.
30
865G Micro 775 & 865GV Micro 775
6. About Panel
Click the “about” button in Main Panel, the button will be highlighted
and the About Panel will slide out to up as the following figure.
In this panel, you can get model name and detail information in hints
of all the chipset that are related to overclocking. You can also get
the mainboard’s BIOS model and the Version number of
[WarpSpeeder™] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features
are controlled by several separate chipset, [WarpSpeeder™] divide
these features to separate panels. If one chipset is not on board, the
correlative button in Main panel will be disabled, but will not interfere
other panels’ functions. This property can make [WarpSpeeder™]
utility more robust.
31
Motherboard Manual
APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
865G Micro 775
LGA 775
Intel Pentium 4 / Pentium D / Celeron D
Prozessoren mit bis zu 3,4 GHz
CPU
Intel Core2Duo Prozessoren (nur für Ver 8.x)
Unterstützt Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
FSB
Chipsatz
Grafik
Super E/A
865GV Micro 775
LGA 775
Intel Pentium 4 / Pentium D / Celeron D
Prozessoren mit bis zu 3,4 GHz
Unterstützt Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865 G
Intel 865 GV
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
Max. 64MB gemeinsam benutzter
Max. 64MB gemeinsam benutzter
Videospeicher
Videospeicher
ITE 8712F
ITE 8712F
Hardware-Überwachung
Hardware-Überwachung
Lüfterdrehzahl-Controller
Lüfterdrehzahl-Controller
"Smart Guardian"-Funktion von ITE
"Smart Guardian"-Funktion von ITE
DDR DIMM-Steckplätze x 2
DDR DIMM-Steckplätze x 2
Jeder DIMM unterstützt 128/256/512MB & 1GB Jeder DIMM unterstützt 128/256/512MB & 1GB
Arbeitsspeich DDR
DDR
er
Max. 2GB Arbeitsspeicher
Max. 2GB Arbeitsspeicher
Dual-Kanal DDR Speichermodul
Dual-Kanal DDR Speichermodul
Unterstützt DDR 266 / 333 / 400
Unterstützt DDR 266 / 333 / 400
Integrierter IDE-Controller
Integrierter IDE-Controller
Ultra DMA 33 / 66 / 100 Bus Master-Modus
Ultra DMA 33 / 66 / 100 Bus Master-Modus
Unterstützt PIO-Modus 0~4
Unterstützt PIO-Modus 0~4
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferrate bis zu 1.5Gb/s
Datentransferrate bis zu 1.5Gb/s
IDE
SATA
Konform mit der SATA-Spezifikation Version 1.0 Konform mit der SATA-Spezifikation Version 1.0
LAN
32
Realtek 8100C
Realtek 8100C
10 / 100 Mb/s Auto-Negotiation
10 / 100 Mb/s Auto-Negotiation
Halb-/ Vollduplex-Funktion
Halb-/ Vollduplex-Funktion
865G Micro 775 & 865GV Micro 775
865G Micro 775
865GV Micro 775
ALC 655 / ALC 658
ALC 655 / ALC 658
Audio-Codec 5.1-Kanal-Audioausgabe
5.1-Kanal-Audioausgabe
AC’97 Version 2.3
Steckplätze
AGP 8X-Grafikkartensteckplatz
x1
XGP Grafikkartensteckplatz
x1
PCI-Steckplatz
x3
PCI-Steckplatz
x3
Diskettenlaufwerkanschluss
x1
Diskettenlaufwerkanschluss
x1
IDE-Anschluss
x2
IDE-Anschluss
x2
SATA-Anschluss
x2
SATA-Anschluss
x2
Fronttafelanschluss
x1
Fronttafelanschluss
x1
Front-Audioanschluss
x1
Front-Audioanschluss
x1
CD-IN-Anschluss
x1
CD-IN-Anschluss
x1
x1
S/PDIF-Ausgangsanschluss(optional)
x1
Onboard-Ans S/PDIF-Ausgangsanschluss(optional)
chluss
AC’97 Version 2.3
S/PDIF Eingangsanschluss
x1
S/PDIF Eingangsanschluss
x1
CPU-Lüfter-Sockel
x1
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB-Anschluss
x2
USB-Anschluss
x2
Stromanschluss (20-polig)
x1
Stromanschluss (20-polig)
x1
Stromanschluss (4-polig)
x1
Stromanschluss (4-polig)
x1
PS/2-Tastatur
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
PS/2-Maus
x1
Serieller Anschluss
x1
Serieller Anschluss
x1
Rückseiten-E Druckeranschluss
x1
Druckeranschluss
x1
/A
VGA-Anschluss
x1
VGA-Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss
x3
Audioanschluss
x3
Platinengröße
.
OS-Unterstüt
zung
215 mm (B) X 235 mm (L)
215 mm (B) X 235 mm (L)
Windows 2000 / XP
Windows 2000 / XP
Biostar behält sich das Recht vor, ohne
Biostar behält sich das Recht vor, ohne
Ankündigung die Unterstützung für ein
Ankündigung die Unterstützung für ein
Betriebssystem hinzuzufügen oder zu
Betriebssystem hinzuzufügen oder zu
entfernen.
entfernen.
33
Motherboard Manual
FRANCE
865G Micro 775
865GV Micro 775
LGA 775
UC
Processeurs Intel Pentium 4 / Pentium D /
LGA 775
Celeron D jusqu'à 3,4 GHz
Processeurs Intel Pentium 4 / Pentium D /
Processeurs Intel Core2Duo (Seulement pour
Celeron D jusqu'à 3,4 GHz
Ver 8.x)
Prend en charge les technologies
Prend en charge les technologies
Hyper-Threading
Hyper-Threading
d'exécution de bit de désactivation
d'exécution de bit de désactivation
Intel SpeedStep® optimisée
Intel SpeedStep® optimisée
de mémoire étendue 64
de mémoire étendue 64
Bus frontal 400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
Mémoire vidéo partagée maximale de 64 Mo
Mémoire vidéo partagée maximale de 64 Mo
ITE 8712F
ITE 8712F
Moniteur de matériel
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Contrôleur de vitesse de ventilateur
Fonction "Gardien intelligent" de l'ITE
Fonction "Gardien intelligent" de l'ITE
Fentes DDR DIMM x 2
Fentes DDR DIMM x 2
Chaque DIMM prend en charge des DDR de
Chaque DIMM prend en charge des DDR de
Mémoire
128/256/512 Mo et 1Go
128/256/512 Mo et 1Go
principale
Capacité mémoire maximale de 2 Go
Capacité mémoire maximale de 2 Go
Chipset
Graphiques
Super E/S
Module de mémoire DDR à mode à double voie Module de mémoire DDR à mode à double voie
IDE
Prend en charge la DDR 266 / 333 / 400
Prend en charge la DDR 266 / 333 / 400
Contrôleur IDE intégré
Contrôleur IDE intégré
Mode principale de Bus Ultra DMA 33 / 66 / 100 Mode principale de Bus Ultra DMA 33 / 66 / 100
Prend en charge le mode PIO 0~4,
SATA
LAN
34
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré :
Contrôleur Serial ATA intégré :
Taux de transfert jusqu'à 1.5 Go/s.
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version 1.0
Conforme à la spécification SATA Version 1.0
Realtek 8100C
Realtek 8100C
10 / 100 Mb/s négociation automatique
10 / 100 Mb/s négociation automatique
Half / Full duplex capability
Half / Full duplex capability
865G Micro 775 & 865GV Micro 775
865G Micro 775
865GV Micro 775
ALC 655 / ALC658
ALC 655 / ALC658
Codec audio Sortie audio à 5.1 voies
Sortie audio à 5.1 voies
AC’97 Version 2.3
Fentes
Fente graphique AGP 8X
E/S du
panneau
arrière
Dimensions
de la carte
x1
Fente graphique XGP
x1
Fente PCI
x3
Fente PCI
x3
Connecteur de disquette
x1
Connecteur de disquette
x1
Connecteur IDE
x2
Connecteur IDE
x2
Connecteur SATA
x2
Connecteur SATA
x2
Connecteur du panneau avant
x1
Connecteur du panneau avant
x1
Connecteur Audio du panneau avant
x1
Connecteur Audio du panneau avant
x1
Connecteur d'entrée CD
x1
Connecteur d'entrée CD
x1
x1
Connecteur d'entrée S/PDIF (en option)
x1
Connecteur Connecteur d'entrée S/PDIF (en option)
embarqué
AC’97 Version 2.3
Connecteur de sortie S/PDIF
x1
Connecteur de sortie S/PDIF
x1
Embase de ventilateur UC
x1
Embase de ventilateur UC
x1
Embase de ventilateur système
x1
Embase de ventilateur système
x1
Embase d'effacement CMOS
x1
Embase d'effacement CMOS
x1
Connecteur USB
x2
Connecteur USB
x2
Connecteur d'alimentation (20 broches)
x1
Connecteur d'alimentation (20 broches)
x1
Connecteur d'alimentation (4 broches)
x1
Connecteur d'alimentation (4 broches)
x1
Clavier PS/2
x1
Clavier PS/2
x1
Souris PS/2
x1
Souris PS/2
x1
Port série
x1
Port série
x1
Port d'imprimante
x1
Port d'imprimante
x1
Port VGA
x1
Port VGA
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Fiche audio
x3
Fiche audio
x3
215mm (l) X 235 mm (H)
215mm (l) X 235 mm (H)
Windows 2000 / XP
Windows 2000 / XP
Support SE Biostar se réserve le droit d'ajouter ou de
Biostar se réserve le droit d'ajouter ou de
supprimer le support de SE avec ou sans préavis. supprimer le support de SE avec ou sans préavis.
35
Motherboard Manual
IT ALIAN
865G Micro 775
865GV Micro 775
LGA 775
CPU
Processore Intel Pe ntium 4 / Pentium D /
LGA 775
Celeron D fino a 3.4 GHz
Processore Intel Pe ntium 4 / Pentium D /
Processore Intel Core 2Duo (solo per Ver
Celeron D fino a 3.4 GHz
8.x)
Supporto di Hyper -Threadi ng
Supporto di Hyper -Threadi ng
Execute Disable Bit
Execute Disable Bit
Enha nced Intel SpeedStep®
Enha nced Intel SpeedStep®
Tecnolo gia Extended M emory 64
Tecnolo gia Extended M emory 64
FSB
Chipset
Grafica
Super I/O
400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
La memoria video condivisa massima è di 64MB La memoria video condivisa massima è di 64MB
ITE 8712F
ITE 8712F
Monitoraggio hardware
Monitoraggio hardware
Controller velocità ventolina
Controller velocità ventolina
Funzione "Smart Guardi an" di I TE
Funzione "Smart Guardi an" di I TE
Alloggi DIMM DDR x 2
Alloggi DIMM DDR x 2
Ciascun DIMM supporta DDR
Ciascun DIMM supporta DDR
Memoria
128/256/ 512MB e 1GB
128/256/ 512MB e 1GB
principale
Capacità massima della memori a 2GB
Capacità massima della memori a 2GB
Modulo di memoria DDR a canale do ppio
Modulo di memoria DDR a canale do ppio
Supporto di DDR 266 / 333 / 400
Supporto di DDR 266 / 333 / 400
Controller IDE i ntegrato
Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 /
Modalità Bus Master Ultra DMA 33 / 66 /
100
100
Supporto modalità PIO Mode 0- 4
Supporto modalità PIO Mode 0- 4
Controller Serial ATA inte grato
Controller Serial ATA inte grato
IDE
SATA
36
Velocità di trasferimento dei dati fi no a 1.5 Velocità di trasferimento dei dati fi no a 1.5
Gb/s.
Gb/s.
Compatibile specifiche SATA Versione 1.0.
Compatibile specifiche SATA Versione 1.0.
865G Micro 775 & 865GV Micro 775
865G Micro 775
LAN
Codec
audio
Alloggi
865GV Micro 775
Realtek 8100C
Realtek 8100C
Negoziazione automatica 10 / 100 Mb/s
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
Capacità Half / Full Duplex
ALC 655 / ALC 658
ALC 655 / ALC 658
Uscita audio 5.1 ca nali
Uscita audio 5.1 ca nali
AC’97 Versione 2.3
AC’97 Versione 2.3
Alloggio grafica A GP 8X
x1
Alloggio grafica X GP
x1
Alloggio PCI
x3
Alloggio PCI
x3
Connettore flo ppy
x1
Connettore flo ppy
x1
Connettore IDE
x2
Connettore IDE
x2
Connettore SATA
x2
Connettore SATA
x2
Connettore pa nnello fro ntale
x1
Connettore pa nnello fro ntale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore CD-in
x1
Connettore CD-in
x1
Connettori Connettore input S/PDIF (o ptional)
x1
Connettore input S/PDIF (o ptional)
x1
su scheda Connettore output SPDIF
x1
Connettore output SPDIF
x1
I/O
pannello
posteriore
Dimension
i scheda
Sistemi
operativi
supportati
Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x1
Collettore ventolina sistema
x1
Collettore cancellazione CMOS
x1
Collettore cancellazione CMOS
x1
Connettore USB
x2
Connettore USB
x2
Connettore alimentazione ( 20 pin)
x1
Connettore alimentazione ( 20 pin)
x1
Connettore alimentazione ( 4 pi n)
x1
Connettore alimentazione ( 4 pi n)
x1
Tastiera PS/2
x1
Tastiera PS/2
x1
Mouse PS/2
x1
Mouse PS/2
x1
Porta seriale
x1
Porta seriale
x1
Porta stampante
x1
Porta stampante
x1
Porta VGA
x1
Porta VGA
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Connettore audio
x3
Connettore audio
x3
215 mm (larghezza) x 235 mm (altezza)
215 mm (larghezza) x 235 mm (altezza)
Windows 2000 / XP
Windows 2000 / XP
Biostar si riserva il diritto di aggiungere o
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.
operativo se nza pre avviso.
37
Motherboard Manual
SPANISH
865G Micro 775
865GV Micro 775
LGA 775
Procesador Intel Pentium 4 / Pentium D / Celeron LGA 775
D hasta 3,4 GHz
Procesador Intel Pentium 4 / Pentium D / Celeron
Procesador Intel Core2Duo(solamente para Ver D hasta 3,4 GHz
CPU
8.x)
Admite Hyper-Threading
Admite Hyper-Threading
Bit de deshabilitación de ejecución
Bit de deshabilitación de ejecución
Intel SpeedStep® Mejorado
Intel SpeedStep® Mejorado
Tecnología Extended Memory 64
Tecnología Extended Memory 64
FSB
400 / 533 / 800 MHz
400 / 533 / 800 MHz
Conjunto de Intel 865G
Intel 865GV
chips
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
Gráficos
Súper E/S
Memoria máxima de vídeo compartida de 64MB Memoria máxima de vídeo compartida de 64MB
ITE 8712F
ITE 8712F
Monitor hardware
Monitor hardware
Controlador de velocidad de ventilador
Controlador de velocidad de ventilador
Función "Guardia inteligente" de ITE
Función "Guardia inteligente" de ITE
Ranuras DIMM DDR x 2
Ranuras DIMM DDR x 2
Cada DIMM admite DDR de 128/256/512MB y Cada DIMM admite DDR de 128/256/512MB y
Memoria
1GB
1GB
principal
Capacidad máxima de memoria de 2GB
Capacidad máxima de memoria de 2GB
Módulo de memoria DDR de canal Doble
Módulo de memoria DDR de canal Doble
Admite DDR de 266 / 333 / 400
Admite DDR de 266 / 333 / 400
Controlador IDE integrado
Controlador IDE integrado
Modo bus maestro Ultra DMA 33 / 66 / 100
Modo bus maestro Ultra DMA 33 / 66 / 100
Soporte los Modos PIO 0~4.
Soporte los Modos PIO 0~4.
Controlador ATA Serie Integrado
Controlador ATA Serie Integrado
Tasas de transferencia de hasta 1.5 Gb/s.
Tasas de transferencia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.
Compatible con la versión SATA 1.0.
Realtek 8100C
Realtek 8100C
Negociación de 10 / 100 Mb/s
Negociación de 10 / 100 Mb/s
Funciones Half / Full dúplex
Funciones Half / Full dúplex
IDE
SATA
Red Local
38
865G Micro 775 & 865GV Micro 775
865G Micro 775
Códecs de
sonido
Ranuras
Conectores
en placa
865GV Micro 775
ALC 655 /ALC 658
ALC 655 /ALC 658
Salida de sonido de 5.1 canales
Salida de sonido de 5.1 canales
AC’97 Versión 2.3
AC’97 Versión 2.3
Ranura de gráficos AGP x8
x1
Ranura de gráficos XGP
x1
Ranura PCI
X3
Ranura PCI
X3
Conector disco flexible
X1
Conector disco flexible
X1
Conector IDE
X2
Conector IDE
X2
Conector SATA
X2
Conector SATA
X2
Conector de panel frontal
X1
Conector de panel frontal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
Conector de entrada de CD
X1
Conector de entrada de CD
X1
Conector de entrada S/PDIF
x1
Conector de entrada S/PDIF
x1
(opcional)
(opcional)
Conector de salida S/PDIF
X1
Conector de salida S/PDIF
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de CPU
X1
Cabecera de ventilador de sistema X1
Cabecera de ventilador de sistema X1
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
Conector USB
X2
Conector USB
X2
Conector de alimentación
X1
Conector de alimentación
X1
X1
Conector de alimentación
(20 patillas)
Conector de alimentación
(20 patillas)
(4 patillas)
Teclado PS/2
Panel
trasero de
E/S
Tamaño de
la placa
X1
X1
(4 patillas)
X1
Teclado PS/2
Ratón PS/2
X1
Ratón PS/2
X1
Puerto serie
X1
Puerto serie
X1
Puerto de impresora
X1
Puerto de impresora
X1
Puerto VGA
X1
Puerto VGA
X1
Puerto de red local
X1
Puerto de red local
X1
Puerto USB
X4
Puerto USB
X4
Conector de sonido
X3
Conector de sonido
X3
215 mm. (A) X 235 mm. (H)
Soporte de Windows 2000 / XP
X1
215 mm. (A) X 235 mm. (H)
Windows 2000 / XP
sistema
Biostar se reserva el derecho de añadir o retirar Biostar se reserva el derecho de añadir o retirar
operativo
el soporte de cualquier SO con o sin aviso previo. el soporte de cualquier SO con o sin aviso previo.
39
Motherboard Manual
PORT UGUESE
865G Micro 775
865GV Micro 775
LGA 775
CPU
Processador Intel Pentium 4 / Pentium D /
LGA 775
Celeron D até 3,4 GHz
Processador Intel Pentium 4 / Pentium D /
Processador Intel Core2Duo (apenas para os
Celeron D até 3,4 GHz
modelos Ver 8.x)
Suporta as tecnologias Hyper-Threading
Suporta as tecnologias Hyper-Threading
Execute Disable Bit
Execute Disable Bit
Enhanced Intel SpeedStep®
Enhanced Intel SpeedStep®
Extended Memory 64
Extended Memory 64
FSB
Chipset
400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
Placa
Intel Extreme Graphics 2
Intel Extreme Graphics 2
gráfica
Memória de vídeo máxima partilhada: 64 MB
Memória de vídeo máxima partilhada: 64 MB
ITE 8712F
ITE 8712F
Especificaçã Monitorização do hardware
Monitorização do hardware
o Super I/O Controlador da velocidade da ventoinha
Controlador da velocidade da ventoinha
Função "Smart Guardian" da ITE
Função "Smart Guardian" da ITE
Ranhuras DIMM DDR x2
Ranhuras DIMM DDR x2
Cada módulo DIMM suporta uma memória DDR Cada módulo DIMM suporta uma memória DDR
Memória
de 128/256/512 MB & 1 GB
de 128/256/512 MB & 1 GB
principal
Capacidade máxima de memória: 2 GB
Capacidade máxima de memória: 2 GB
Módulo de memória DDR de canal duplo
Módulo de memória DDR de canal duplo
Suporta módulos DDR 266 / 333 / 400
Suporta módulos DDR 266 / 333 / 400
Controlador IDE integrado
Controlador IDE integrado
Modo Bus master Ultra DMA 33 / 66 / 100
Modo Bus master Ultra DMA 33 / 66 / 100
Suporta o modo PIO 0~4.
Suporta o modo PIO 0~4.
Controlador Serial ATA integrado
Controlador Serial ATA integrado
Velocidades de transmissão de dados até 1.5
Velocidades de transmissão de dados até 1.5
Gb/s.
Gb/s.
Compatibilidade com a especificação SATA
Compatibilidade com a especificação SATA
versão 1.0.
versão 1.0.
IDE
SATA
40
865G Micro 775 & 865GV Micro 775
865G Micro 775
LAN
Codec de
som
Ranhuras
865GV Micro 775
Realtek 8100C
Realtek 8100C
Auto negociação de 10 / 100 Mb/s
Auto negociação de 10 / 100 Mb/s
Capacidade semi/full-duplex
Capacidade semi/full-duplex
ALC 655 / ALC 658
ALC 655 / ALC 658
Saída de áudio de 5.1 canais
Saída de áudio de 5.1 canais
AC’97 Versão 2.3
AC’97 Versão 2.3
Ranhura gráfica AGP 8X
x1
Ranhura gráfica XGP
x1
Ranhura PCI
x3
Ranhura PCI
x3
Conector da unidade de disquetes
x1
Conector da unidade de disquetes
x1
Conector IDE
x2
Conector IDE
x2
Conector SATA
x2
Conector SATA
x2
Conector do painel frontal
x1
Conector do painel frontal
x1
Conector de áudio frontal
x1
Conector de áudio frontal
x1
Conector para entrada de CDs
x1
Conector para entrada de CDs
x1
Conectores Conector de entrada S/PDIF (opcional)
x1
Conector de entrada S/PDIF (opcional)
x1
na placa
Conector de saída S/PDIF
x1
Conector de saída S/PDIF
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha da CPU
x1
Conector da ventoinha do sistema
x1
Conector da ventoinha do sistema
x1
Conector para limpeza do CMOS
x1
Conector para limpeza do CMOS
x1
Conector USB
x2
Conector USB
x2
Conector de alimentação (20 pinos)
x1
Conector de alimentação (20 pinos)
x1
Conector de alimentação (4 pinos)
x1
Conector de alimentação (4 pinos)
x1
Teclado PS/2
x1
Teclado PS/2
x1
Rato PS/2
x1
Rato PS/2
x1
Entradas/S Porta série
x1
Porta série
x1
aídas no
Porta para impressora
x1
Porta para impressora
x1
painel
Porta VGA
x1
Porta VGA
x1
traseiro
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de áudio
x3
Tomada de áudio
x3
Tamanho
da placa
Sistemas
operativos
suportados
215 mm (L) X 235 mm (A)
215 mm (L) X 235 mm (A)
Windows 2000 / XP
Windows 2000 / XP
A Biostar reserva-se o direito de adicionar ou
A Biostar reserva-se o direito de adicionar ou
remover suporte para qualquer sistema
remover suporte para qualquer sistema
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
41
Motherboard Manual
POLISH
865G Micro 775
LGA 775
Procesor Intel Pentium 4 / Pentium D / Celeron D
do 3,4 GHz
Procesor
Procesor Intel Core2Duo (wyłącznie dlaVer 8.x)
Obsługa Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
FSB
Chipset
Grafika
Pamięć
główna
Super I/O
IDE
SATA
LAN
42
865GV Micro 775
LGA 775
Procesor Intel Pentium 4 / Pentium D / Celeron D
do 3,4 GHz
Obsługa Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
Intel Extreme Graphics 2
Intel Extreme Graphics 2
Maks. wielkość współdzielonej pamięci video
Maks. wielkość współdzielonej pamięci video
wynosi 64MB
wynosi 64MB
Gniazda DDR DIMM x 2
Gniazda DDR DIMM x 2
Każde gniazdo DIMM obsługuje moduły
Każde gniazdo DIMM obsługuje moduły
128/256/512MB oraz 1GB DDR
128/256/512MB oraz 1GB DDR
Maks. wielkość pamięci 2GB
Maks. wielkość pamięci 2GB
Moduł pamięci DDR z trybem podwójnego
Moduł pamięci DDR z trybem podwójnego
kanału
kanału
Obsługa DDR 266 / 333 / 400
Obsługa DDR 266 / 333 / 400
ITE 8712F
ITE 8712F
Monitor H/W
Monitor H/W
Kontroler prędkości wentylatora
Kontroler prędkości wentylatora
Funkcja ITE "Smart Guardian"
Funkcja ITE "Smart Guardian"
Zintegrowany kontroler IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 Tryb Bus Master
Ultra DMA 33 / 66 / 100 Tryb Bus Master
obsługa PIO tryb 0~4
obsługa PIO tryb 0~4
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer danych do 1.5 Gb/s.
Transfer danych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji 1.0.
Zgodność ze specyfikacją SATA w wersji 1.0.
Realtek 8100C
Realtek 8100C
10 / 100 Mb/s z automatyczną negocjacją
10 / 100 Mb/s z automatyczną negocjacją
szybkości
szybkości
865G Micro 775 & 865GV Micro 775
865G Micro 775
Kodek
dźwiękowy
Gniazda
Złącza
wbudowane
865GV Micro 775
Działanie w trybie połowicznego / pełnego
Działanie w trybie połowicznego / pełnego
dupleksu
dupleksu
ALC 655 / ALC 658
ALC 655 / ALC 658
5.1 kanałowe wyjście audio
5.1 kanałowe wyjście audio
AC’97 w wersji 2.3
AC’97 w wersji 2.3
Gniazdo grafiki AGP 8X
x1
Gniazdo grafiki XGP
x1
Gniazdo PCI
x3
Gniazdo PCI
x3
Złącze napędu dyskietek
x1
Złącze napędu dyskietek
x1
Złącze IDE
x2
Złącze IDE
x2
Złącze SATA
x2
Złącze SATA
x2
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze audio
x1
Przednie złącze audio
x1
Złącze wejścia CD
x1
Złącze wejścia CD
x1
Złącze wejścia S/PDIF (opcja)
x1
Złącze wejścia S/PDIF (opcja)
x1
Złącze wyjścia S/PDIF
x1
Złącze wyjścia S/PDIF
x1
Złącze główkowe wentylatora procesora
x1
Złącze główkowe wentylatora procesora
x1
Złącze główkowe wentylatora
x1
systemowego
x1
Złącze główkowe kasowania CMOS
x1
Złącze główkowe kasowania CMOS
x1
Złącze USB
x2
Złącze USB
x2
Złącze zasilania (20 pinowe)
x1
Złącze zasilania (20 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura PS/2
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Mysz PS/2
x1
Port szeregowy
x1
Port szeregowy
x1
x1
Port drukarki
x1
Port VGA
x1
Port VGA
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio
x3
Gniazdo audio
x3
Back Panel Port drukarki
I/O
Wymiary
Złącze główkowe wentylatora
systemowego
215 mm (S) X 235 mm (W)
215 mm (S) X 235 mm (W)
Obsluga
Windows 2000 / XP
Windows 2000 / XP
systemu
Biostar zastrzega sobie prawo dodawania lub
Biostar zastrzega sobie prawo dodawania lub
płyty
operacyjne odwoływania obsługi dowolnego systemu
odwoływania obsługi dowolnego systemu
go
operacyjnego bez powiadomienia.
operacyjnego bez powiadomienia.
43
Motherboard Manual
RUSSIAN
865G Micro 775
865GV Micro 775
LGA 775
Процессор Intel Pentium 4 / Pentium D / Celeron LGA 775
CPU
(центральн
ый
процессор)
D до 3.4 ГГц
Процессор Intel Pentium 4 / Pentium D / Celeron
Процессор Intel Core2Duo (только для Ver
D до 3.4 ГГц
8.x)
Поддержка технологий Hyper-Threading
Поддержка технологий Hyper-Threading
Execute Disable Bit
Execute Disable Bit
Enhanced Intel SpeedStep®
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
Extended Memory 64 Technology
FSB
400/ 533 / 800 МГц
400/ 533 / 800 МГц
Набор
Intel 865G
Intel 865GV
микросхем Intel ICH5
Intel Extreme Graphics 2
Графика
Основная
память
Super I/O
IDE
SATA
Intel ICH5
Intel Extreme Graphics 2
Максимальная совместно используемая видео Максимальная совместно используемая видео
память составляет 64 МБ
память составляет 64 МБ
Слоты DDR DIMM x 2
Слоты DDR DIMM x 2
Каждый модуль DIMM поддерживает
Каждый модуль DIMM поддерживает
128/256/512МБ & 1ГБ DDR
128/256/512МБ & 1ГБ DDR
Максимальная ёмкость памяти 2 ГБ
Максимальная ёмкость памяти 2 ГБ
Модуль памяти с двухканальным режимом
Модуль памяти с двухканальным режимом
DDR
DDR
Поддержка DDR 266 / 333 / 400
Поддержка DDR 266 / 333 / 400
ITE 8712F
ITE 8712F
Аппаратный монитор
Аппаратный монитор
Регулятор скорости
Регулятор скорости
Функция ITE "Smart Guardian"
Функция ITE "Smart Guardian"
(Интеллектуальная защита)
(Интеллектуальная защита)
Встроенное устройство управления
Встроенное устройство управления
встроенными интерфейсами устройств
встроенными интерфейсами устройств
Режим "хозяина" шины Ultra DMA 33 / 66 / 100 Режим "хозяина" шины Ultra DMA 33 / 66 / 100
Поддержка режима PIO 0~4,
Поддержка режима PIO 0~4,
Встроенное последовательное устройство
Встроенное последовательное устройство
управления ATA
управления ATA
скорость передачи данных до 1.5 гигабит/с. скорость передачи данных до 1.5 гигабит/с.
Соответствие спецификации SATA версия 1.0. Соответствие спецификации SATA версия 1.0.
Локальная
сеть
44
Realtek 8100C
Realtek 8100C
Автоматическое согласование 10 / 100 Мб/с
Автоматическое согласование 10 / 100 Мб/с
Частичная / полная дуплексная способность
Частичная / полная дуплексная способность
865G Micro 775 & 865GV Micro 775
865G Micro 775
Звуковой
кодек
Слоты
865GV Micro 775
ALC 655 / ALC 658
ALC 655 / ALC 658
Шестиканальный звуковой выход
Шестиканальный звуковой выход
AC’97 Версия 2.3
AC’97 Версия 2.3
Графический слот AGP 8X
x1
Графический слот XGP
Слот PCI
x3
Слот PCI
x3
Разъём НГМД
x1
Разъём НГМД
x1
Разъём IDE
x2
Разъём IDE
x2
Разъём SATA
x2
Разъём SATA
x2
Разъём на лицевой панели
x1
Разъём на лицевой панели
x1
Входной звуковой разъём
x1
Входной звуковой разъём
x1
Разъём ввода для CD
x1
Разъём ввода для CD
x1
Разъём ввода для S/PDIF
(дополнительно)
Встроенны Разъём вывода для S/PDIF
й разъём
x1
Разъём ввода для S/PDIF
x1
(дополнительно)
x1
x1
Разъём вывода для S/PDIF
x1
Контактирующее приспособление
Контактирующее приспособление
вентилятора центрального процессора x1
вентилятора центрального процессора x1
Контактирующее приспособление
Контактирующее приспособление
вентилятора системы
x1
вентилятора системы
x1
Открытое контактирующее приспособление
Открытое контактирующее приспособление
CMOS
CMOS
x1
x1
USB-разъём
x2
USB-разъём
x2
Разъем питания (20 вывод)
x1
Разъем питания (20 вывод)
x1
Разъем питания (4 вывод)
x1
Разъем питания (4 вывод)
x1
Клавиатура PS/2
x1
Клавиатура PS/2
x1
Мышь PS/2
x1
Мышь PS/2
x1
Задняя
Последовательный порт
x1
Последовательный порт
x1
панель
Порт подключения принтера
x1
Порт подключения принтера
x1
средств
Порт VGA
x1
Порт VGA
x1
ввода-выв Порт LAN
x1
Порт LAN
x1
ода
x4
USB-порт
x4
USB-порт
Гнездо для подключения
Гнездо для подключения
наушников
Размер
панели
x3
наушников
215 мм (Ш) X 235 мм (В)
215 мм (Ш) X 235 мм (В)
Windows 2000 / XP
Windows 2000 / XP
x3
Поддержка Biostar сохраняет за собой право добавлять
Biostar сохраняет за собой право добавлять
OS
или удалять средства обеспечения для OS с
или удалять средства обеспечения для OS с
или без предварительного уведомления.
или без предварительного уведомления.
45
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪865G Micro 775‬‬
‫‪LGA 775‬‬
‫‪Intel Pentium 4 / Pentium D / Celeron D‬ﻡﻌ ﺎﻟﺠﺎت‬
‫ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ 3.4‬ﺝﻴﺠﺎ هﺮﺕﺰ‬
‫وﺣﺪة اﻟﻤﻌ ﺎﻟﺠﺔ‬
‫)ﻓﻲ ‪ x.8‬ﻓﻘﻂ( ‪Intel Core2Duo‬‬
‫اﻟﻤﺮآﺰﻳﺔ‬
‫‪Hyper-Threading‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫‪Execute Disable Bit‬‬
‫®‪Enhanced Intel SpeedStep‬‬
‫‪Extended Memory 64 Technology‬‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﻴﺠﺎ هﺮﺕﺰ ‪ 400/ 533 / 800‬ﺕﺮدد‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬
‫‪865GV Micro 775‬‬
‫‪LGA 775‬‬
‫‪Intel Pentium 4 / Pentium D / Celeron D‬ﻡﻌ ﺎﻟﺠﺎت‬
‫ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ 3.4‬ﺝﻴﺠﺎ هﺮﺕﺰ‬
‫‪Hyper-Threading‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫‪Execute Disable Bit‬‬
‫®‪Enhanced Intel SpeedStep‬‬
‫‪Extended Memory 64 Technology‬‬
‫ﻡﻴﺠﺎ هﺮﺕﺰ ‪ 400/ 533 / 800‬ﺕﺮدد‬
‫‪Intel 865G‬‬
‫‪Intel 865GV‬‬
‫‪Intel ICH5‬‬
‫‪Intel ICH5‬‬
‫‪Intel Extreme Graphics 2‬‬
‫‪Intel Extreme Graphics 2‬‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪64‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪64‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻓﺘﺤﺔ‪DDR DIMM‬ﻋﺪد‪2‬‬
‫ﻓﺘﺤﺔ‪DDR DIMM‬ﻋﺪد‪2‬‬
‫‪ 128/256/512‬ﺳﻌﺔ ‪ DDR‬ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ‪ 128/256/512‬ﺳﻌﺔ ‪ DDR‬ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع‪DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫‪Super I/O‬‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 2‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 2‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫أﺣﺎدﻳﺔ‪ /‬ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR‬وﺣﺪة ذاآﺮة‬
‫أﺣﺎدﻳﺔ‪ /‬ﻡﺰدوﺝﺔ اﻟﻘﻨﺎة‪DDR‬وﺣﺪة ذاآﺮة‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪ 266 / 333 / 400‬ﺳﻌﺎت‪DDR‬ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪ 266 / 333 / 400‬ﺳﻌﺎت‪ DDR‬ﺕﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع‬
‫‪ITE 8712F‬‬
‫‪ITE 8712F‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣ ﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣﺔ‬
‫‪ ITE‬ﻡﻦ"‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫‪ ITE‬ﻡﻦ"‪"Smart Guardian‬وﻇﻴﻔﺔ‬
‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬
‫ﻡﻨﻔﺬ ‪IDE‬‬
‫‪SATA‬‬
‫ﺵﺒﻜﺔ دا ﺧﻠﻴﺔ‬
‫‪100/10‬‬
‫آﻮدﻳﻚ اﻟﺼﻮت‬
‫ﻡﺘﻜﺎﻡﻞ‪IDE‬ﻡﺘﺤﻜﻢ‬
‫‪ Ultra DMA 33 / 66 / 100‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫‪Ultra DMA 33 / 66 / 100‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻡﺘﻜﺎﻡﻞ‪Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪/‬ﺛﺎﻥﻴﺔ‪.‬‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪/‬ﺛﺎﻥﻴﺔ‪.‬‬
‫‪ 1.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 1.0.‬اﻹﺹﺪار‪SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪Realtek 8100C‬‬
‫‪Realtek 8100C‬‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺛﺎﻥﻴﺔ‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100/10‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺛﺎﻥﻴﺔ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫‪ALC655 / ALC 658‬‬
‫‪ALC655 / ALC 658‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬
‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬
‫‪ AC’97‬ﻡﻦ ‪2.3‬اﻹﺹﺪار‬
‫‪ AC’97‬ﻡﻦ ‪2.3‬اﻹﺹﺪار‬
‫‪46‬‬
‫‪865G Micro 775 & 865GV Micro 775‬‬
‫‪865GV Micro 775‬‬
‫‪865G Micro 775‬‬
‫ﻓﺘﺤﺔ ‪ AGP‬ﻓﺌﺔ ‪ 8X‬ﻟﺒﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪ XGP‬ﻓﺌﺔ ﻟﺒﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪3‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪3‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫ﻡﻨﻔﺬ دﺧﻞ‪ ) S/PDIF‬اﺧﺘﻴﺎري(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ دﺧﻞ‪ ) S/PDIF‬اﺧﺘﻴﺎري(‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺣﺔ‬
‫ﻡﻨﻔﺬ ﺧﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺧﺮج‪S/PDIF‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪20‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪20‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ دﺧﻞ‪ /‬ﺧﺮج‬
‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد ‪3‬‬
‫اﻟﻔﺘﺤﺎت‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ‬
‫‪47‬‬
‫‪ 215‬ﻡﻢ )ﻋﺮض (‪ 235 X‬ﻡﻢ ) ارﺕﻔﺎع(‬
‫‪ 215‬ﻡﻢ )ﻋﺮض (‪ 235 X‬ﻡﻢ ) ارﺕﻔﺎع(‬
‫‪Windows 2000 / XP‬‬
‫‪Windows 2000 / XP‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞ ﺑﺈﺧﻄﺎر أو‪Biostar‬ﺕﺤﺘﻔﻆ‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ﺕﺸﻐﻴﻞ ﺑﺈﺧﻄﺎر أو‪Biostar‬ﺕﺤﺘﻔﻆ‬
‫ﺑﺪون إﺧﻄﺎر‪.‬‬
‫ﺑﺪون إﺧﻄﺎر‪.‬‬
Motherboard Manual
JAPANESE
865G Micro 775
LGA 775
Intel Pentium 4 / Pentium D / Celeron D
processor up to 3.4 GHz
CPU
Intel Core2Duo Processor (Ver 8.x のみ)
Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
FSB
チップセット
865GV Micro 775
LGA 775
Intel Pentium 4 / Pentium D / Celeron D
processor up to 3.4 GHz
Hyper-Threading
Execute Disable Bit
Enhanced Intel SpeedStep®
Extended Memory 64 Technology
400/ 533 / 800 MHz
400/ 533 / 800 MHz
Intel 865G
Intel 865GV
Intel ICH5
Intel ICH5
グラフィック Intel Extreme Graphics 2
Intel Extreme Graphics 2
ス
最大の共有ビデオメモリは64MBです
最大の共有ビデオメモリは64MBです
DDR DIMMスロット x 2
DDR DIMMスロット x 2
各DIMMは128/256/512MB & 1GB DDRをサポート 各DIMMは128/256/512MB & 1GB DDRをサポート
メインメモリ 最大メモリ容量2GB
デュアル チャンネルモードDDRメモリモジュール
Super I/O
IDE
SATA
Codec
48
デュアル チャンネルモードDDRメモリモジュール
DDR 266 / 333 / 400 をサポート
DDR 266 / 333 / 400 をサポート
ITE 8712F
ITE 8712F
H/Wモニター
H/Wモニター
ファン速度コントローラ/ モニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
ITEの「スマートガーディアン」機能
統合IDEコントローラ
統合IDEコントローラ
Ultra DMA 33 / 66 / 100バスマスタモード
Ultra DMA 33 / 66 / 100バスマスタモード
PIO Mode 0~4のサポート
PIO Mode 0~4のサポート
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度
最高1.5 Gb/秒のデータ転送速度
SATAバージョン1.0仕様に準拠。
SATAバージョン1.0仕様に準拠。
Realtek 8100C
Realtek 8100C
10/100 LAN 10 / 100 Mb/sオートネゴシエーション
サウンド
最大メモリ容量2GB
10 / 100 Mb/sオートネゴシエーション
半/全二重機能
半/全二重機能
ALC 655 / ALC 658
ALC 655 / ALC 658
5.1チャンネルオーディオアウト
5.1チャンネルオーディオアウト
AC’97バージョン2.3
AC’97バージョン2.3
865G Micro 775 & 865GV Micro 775
865G Micro 775
スロット
865GV Micro 775
AGP 8X グラフィックススロット
x1
XGP グラフィックススロット
x1
PCIスロット
x3
PCIスロット
x3
フロッピーコネクタ
x1
フロッピーコネクタ
x1
IDEコネクタ
x2
IDEコネクタ
x2
SATAコネクタ
x2
SATAコネクタ
x2
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
CDインコネクタ
x1
CDインコネクタ
x1
x1
S/PDIFインコネクタ (オプション)
x1
オンボードコ S/PDIFインコネクタ (オプション)
S/PDIFアウトコネクタ
x1
S/PDIFアウトコネクタ
x1
CPUファンヘッダ
x1
CPUファンヘッダ
x1
システムファンヘッダ
x1
システムファンヘッダ
x1
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USBコネクタ
x2
USBコネクタ
x2
電源コネクタ(20ピン)
x1
電源コネクタ(20ピン)
x1
電源コネクタ(4ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード
x1
PS/2キーボード
x1
PS/2マウス
x1
PS/2マウス
x1
シリアルポート
x1
シリアルポート
x1
背面パネル
プリンタポート
x1
プリンタポート
x1
I/O
VGAポート
x1
VGAポート
x1
ネクタ
LANポート
x1
LANポート
x1
USBポート
x4
USBポート
x4
オーディオジャック
x3
オーディオジャック
x3
ボードサイズ 215 mm (幅) X 235 mm (高さ)
Windows 2000 / XP
215 mm (幅) X 235 mm (高さ)
Windows 2000 / XP
OSサポート Biostarは事前のサポートなしにOSサポートを追加ま Biostarは事前のサポートなしにOSサポートを追加ま
たは削除する権利を留保します。
たは削除する権利を留保します。
2006/10/27
49
865GV Micro 775 BIOS Setup
BIOS Setup....................................................................................... 1
1 Main Menu.................................................................................................... 3
2 Standard CMOS Features.............................................................................. 6
3 Advanced BIOS Features.............................................................................. 9
4 Advanced Chipset Features......................................................................... 15
5 Integrated Peripherals ................................................................................. 18
6 Power Management Setup........................................................................... 24
7 PnP/PCI Configurations .............................................................................. 28
8 PC Health Status ......................................................................................... 30
9 Frequency /Voltage Control........................................................................ 32
i
865GV Micro 775
BIOS Setup
Introduction
This manual discussed Award™ Setup program built into the ROM BIOS. The Setup
program allows users to modify the basic system configuration. This special information is
then stored in battery-backed RAM so that it retains the Setup information when the power
is turned off.
The Award BIOS™ installed in your computer system’s ROM (Read Only Memory) is a
custom version of an industry standard BIOS. This means that it supports Intel Pentium ® 4
processor input/output system. The BIOS provides critical low-level support for standard
devices such as disk drives and serial and parallel ports.
Adding important has customized the Award BIOS™, but nonstandard, features such as
virus and password protection as well as special support for detailed fine-tuning of the
chipset controlling the entire system.
The rest of this manual is intended to guide you through the process of configuring your
system using Setup.
Plug and Play Support
These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD
(Extended System Configuration Data) write is supported.
EPA Green PC Support
This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.
APM Support
These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management
(APM) specification. Power management features are implemented via the System
Management Interrupt (SMI). Sleep and Suspend power management modes are supported.
This AWARD BIOS can manage power to the hard disk drives and video monitors.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface
specification (ACPI). It provides ASL code for power management and device
configuration capabilities as defined in the ACPI specification, developed by Microsoft,
Intel and Toshiba.
1
865GV Micro 775
PCI Bus Support
This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component
Interconnect) local bus specification.
DRAM Support
DDR DRAM (Double Data Rate Synchronous DRAM) are supported.
Supported CPUs
This AWARD BIOS supports the Intel Pentium ® 4 CPU.
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the
<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.
The following table provides more detail about how to navigate in the Setup program by
using the keyboard.
Keystroke
Up arrow
Down arrow
Left arrow
Right arrow
Move Enter
PgUp key
PgDn key
+ Key
- Key
Esc key
F1 key
F5 key
F7 key
F10 key
Function
Move to previous item
Move to next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Move to the item you desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the optimized defaults
Save all the CMOS changes and exit
2
865GV Micro 775
1 Main Menu
Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the
screen. The Main Menu allows you to select from several setup functions. Use the arrow
keys to select among the items and press <Enter> to accept and enter the sub-menu.
WARNING
The information about BIOS defaults on this manual (Figure
1,2,3,4,5,6,7,8,9) is just only for reference, please refer to the BIOS
installed on board, for update information.
Figure 1. Main Menu
Standard CMOS Features
This submenu contains industry standard configurable options.
Advanced BIOS Features
This submenu allows you to configure enhanced features of the BIOS.
Advanced Chipset Features
This submenu allows you to configure special chipset features.
3
865GV Micro 775
Integrated Peripherals
This submenu allows you to configure certain IDE hard drive options and Programmed
Input/ Output features.
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain “Plug and Play” and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock. (However,
this function is strongly recommended not to use. Not properly change the voltage
and clock may cause CPU or M/B damage!)
Load Optimized Defaults
This selection allows you to reload the BIOS when the system is having problems
particularly with the boot sequence. These configurations are factory settings optimized
for this system. A confirmation message will be displayed before defaults are set.
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from making
changes using the CMOS Setup Utility. You will be prompted with to enter a password.
4
865GV Micro 775
Set User Password
If the Supervisor Password is not set, then the User Password will function in the same way
as the Supervisor Password.
If the Supervisor Password is set and the User Password is
set, the “User” will only be able to view configurations but will not be able to change them.
Save & Exit Setup
Save all configuration changes to CMOS(memory) and exit setup. Confirmation message
will be displayed before proceeding.
Exit Without Saving
Abandon all changes made during the current session and exit setup. Confirmation message
will be displayed before proceeding.
Upgrade BIOS
This submenu allows you to upgrade bios.
5
865GV Micro 775
2 Standard CMOS Features
The items in Standard CMOS Setup Menu are divided into 10 categories. Each category
includes no, one or more than one setup items. Use the arrow keys to highlight the item and
then use the<PgUp> or <PgDn> keys to select the value you want in each item.
Figure 2. Standard CMOS Setup
6
865GV Micro 775
Main Menu Selections
This table shows the selections that you can make on the Main Menu.
Item
Options
Date
mm : dd : yy
Set the system date. Note
that the ‘Day’ automatically
changes when you set the
date.
Time
hh : mm : ss
Set the
clock.
IDE Primary Master
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options
IDE Primary Slave
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options.
IDE Secondary Master Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options.
IDE Secondary Slave
Options are in its sub
menu.
Press <Enter> to enter the
sub menu of detailed
options.
360K, 5.25 in
Drive A
1.2M, 5.25 in
Select the type of floppy
disk drive installed in your
system.
720K, 3.5 in
Drive B
Description
system
internal
1.44M, 3.5 in
2.88M, 3.5 in
None
Video
EGA/VGA
CGA 40
CGA 80
MONO
7
Select the default video
device.
865GV Micro 775
Item
Options
Description
Halt On
All Errors
Select the situation in which
No Errors
you want the BIOS to stop
All, but Keyboard
All, but Diskette
the POST process and
notify you.
All, but Disk/ Key
Base Memory
N/A
Displays the amount of
conventional memory
detected during boot up.
Extended Memory
N/A
Displays the amount of
extended memory detected
during boot up.
Total Memory
N/A
Displays the total memory
available in the system.
8
865GV Micro 775
3 Advanced BIOS Features
Figure 3. Advanced BIOS Setup
9
865GV Micro 775
Boot Seq & Floppy Setup
Hard Disk Boot Priority
These BIOS attempt to arrange the Hard Disk boot sequence automatically.
This will depend on which Hard Disk is installed.
The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec, Slave, USB HDD0, USB
HDD1, USB HDD2, and Bootable Add-in Cards.
10
865GV Micro 775
First/ Second/ Third/ Boot Other Device
These BIOS attempt to load the operating system from the device in the sequence
selected in these items.
The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, LAN, HPT370, Disabled, Enabled.
Swap Floppy Drive
For systems with two floppy drives, this option allows you to swap logical drive
assignments.
The Choices: Disabled (default), Enabled.
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have 40 or 80
tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Disabled, Enabled (default).
Report NO FDD for Win95
This item allows you to select YES/NO to Report NO FDD for Win95.
The Choices: NO (default),Yes.
Cache Setup
CPU L1&L2 Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disabled
Disable cache.
11
865GV Micro 775
CPU L3 Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default) Enable cache.
Disabled
Disable cache.
CPU Feature
Delay Prior to Thermal
Set this item to enable the CPU Thermal function to engage after the specified
time.
The Choices: 4 Min, 8 Min, 16Min (default), 32 Min.
Thermal Management
Allows you to choose the thermal management of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
TM2 Bus Ratio
Represents the frequency. Bus ratio of the throttled performance state that will
be initiated when the on-die sensor gose from not hot to hot.
The Choices: 0X (default).
Min= 0,Max= 255 ,Key in a DEC number.
TM2 Bus VID
Represents the voltage of the throttled performance state that will be initiated
when the on-die sensor gose from not hot to hot.(Min=0.8375,Max=1.6000.)
The Choices: 0.8375 (default).
12
865GV Micro 775
Limit CPU ID Max Val
Set limit CPU ID maximun vale to 3, it should be disabled for WinXP.
The Choices: Disabled (default), Enabled.
C1E Function
This item allows you to configure the Enhanced Halt State (C1E) function, which
may reduce the power consumption of your system when the system is idle.
The Choices: Auto (default),Disabled.
Execute Disable Bit
This item allows you to configure the Execute Disabled Bit function, which
protects your system from buffer overflow attacks.
The Choices: Enabled (default), Disabled.
Virtualization Technology
Virtualization Technology can virtually separate your system resource into
several parts, thus enhance the performance when running virtual machines or
multi interface systems.
The Choices: Enabled (default), Disabled.
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect the IDE
Hard Disk boot sector. If this function is enabled and an attempt is made to write to the
boot sector, BIOS will display a warning message on the screen and sound an alarm beep.
Enabled
Virus protection is activated.
Disabled (default)
Virus protection is disabled.
Hyper-Threading Technology
This option allows you to enable or disabled CPU Hyper-Threading. Enabled for
Windows XP and Linux 2.4.x (OS optimized for Hyper Threading Technology. Disabled
for other OS (OS not optimized for Hyper Threading Technology.
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test (POST)
execute after you power up the computer.
Disabled
Normal POST.
Enabled (default)
Enable quick POST.
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Numpad is number keys.
Off
Numpad is arrow keys.
Gate A20 Option
13
to
865GV Micro 775
Select if chipset or keyboard controller should control Gate A20.
Normal
A pin in the keyboard controller controls Gate A20.
Fast (default)
Lets chipset control Gate A20.
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by the keyboard
controller. When enabled, the typematic rate and typematic delay can be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the key down.
The Choices: 6 (default), 8,10,12,15,20,24,30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The Choices: 250 (default), 500, 750, 1000.
Security Option
This option will enable only individuals with passwords to bring the system online and/or
to use the CMOS Setup Utility.
System
A password is required for the system to boot and is also required to
access the Setup Utility.
Setup (default) A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC Mode
Selecting Enabled enables APIC device mode reporting from the BIOS to the operating
system.
The Choices: Enabled (default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Summary Screen Show
This item allows you to enable/disable the summary screen. Summary screen means
system configuration and PCI device listing.
The choices: Enabled (default)., Disabled
14
865GV Micro 775
4 Advanced Chipset Features
This submenu allows you to configure the specific features of the chipset installed on your
system. This chipset manage bus speeds and access to system memory resources, such as
DRAM. It also coordinates communications with the PCI bus. The default settings that came
with your system have been optimized and therefore should not be changed unless you are
suspicious that the settings have been changed incorrectly.
Figure 4. Advanced Chipset Setup
DRAM Timing Selectable
When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing.
The Choices: By SPD (default), Manual.
CAS Latency Time
When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing.
The Choices: 2 (default), 2.5, 3.
Active to Precharge Delay
This item controls the number of DRAM clocks to activate the precharge delay.
The Choices: 8 (default), 7, 6, 5.
15
865GV Micro 775
DRAM RAS# to CAS# Delay
This field let you insert a timing delay between the CAS and RAS strobe signals, used
when DRAM is written to, read from, or refreshed. Fast gives faster performance; and slow
gives more stable performance. This field applies only when synchronous DRAM is
installed in the system.
The Choices: 4 (default), 3, 2.
DRAM RAS# Precharge
If an insufficient number of cycle is allowed for RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data. Fast
gives faster performance; and Slow gives more stable performance. This field applies only
when synchronous DRAM is installed in the system.
The Choices: 4 (default), 3, 2.
Memory Frequency For
This item allows you to select the Memory Frequency.
The Choices: Auto (default), DDR266, DDR300, DDR320, DDR400.
System BIOS Cacheable
Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh,
resulting a better system performance. However, if any program writes to this memory area,
a system error may result.
The Choices: Enabled (default), Disabled.
Video BIOS Cacheable
Select Enabled allows caching of the video BIOS, resulting a better system performance.
However, if any program writes to this memory area, a system error may result.
The Choices: Disabled (default).d, Enabled
Memory Hole At 15M-16M
You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved it cannot be cached. The user information of peripherals that need to use this area
of system memory usually2 discussed their memory requirements.
The Choices: Disabled (default), Enabled.
AGP Aperture Size (MB)
Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a portion
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
The Choices: 64, 4, 8, 16, 32, 128 (default), 256.
16
865GV Micro 775
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: AGP (default), PCI Slot.
17
865GV Micro 775
5 Integrated Peripherals
Figure 5. Integrated Peripherals
18
865GV Micro 775
Onboard IDE Device
Press Enter to configure the onboard IDE Controllers.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read / write. If your IDE hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal number of block mode
(most new drives do), select Enabled for automatic detection of the optimal
number of block read / write per sector where the drive can support.
The Choices: Enabled (default), Disabled.
IDE DMA Transfer Access
This item allows you to enable or disable the IDE transfer access.
The Choices: Enabled (default), Disabled.
On-Chip Primary/ Secondary PCI IDE
This item allows you to enable or disable the primary/ secondary IDE Channel.
The Choices: Enabled (default), Disabled.
Primary / Secondary /Master / Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for
each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4
will increased performance progressively. In Auto mode, the system
automatically determines the best mode for each device.
The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, Mode4.
19
865GV Micro 775
Primary / Secondary /Master / Slave UDMA
Ultra DMA/100 functionality can be implemented if it is supported by the IDE
hard drives in your system. As well, your operating environment requires a DMA
driver (Windows 95 OSR2 or a third party IDE bus master driver). If your hard
drive and your system software both support Ultra DMA/100, select Auto to
enable BIOS support.
The Choices: Auto (default), Disabled.
On-Chip Serial SATA
This item allows you to choose:
Disabled: disabled SATA Controller.
Auto: auto arrange by BIOS.
Combined Mode: PATA and SATA are combined max of 2 IDE drivers in each
channel.
Enhanced Mode: enabled both SATA and PATA max of 6 IDE drivers are
supported.
SATA Only: SATA is operating in legacy mode.
The Choices: Auto (default), Combined Mode, Enhanced Mode, SATA only.
Serial ATA Port 0/Port1 Mode
The Choices: Primary Master (default).
20
865GV Micro 775
Onboard Device
Press Enter to configure the onboard Device.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals.
The Choices: Enabled (default), Disabled
USB 2.0 Controller
This entry is to enabled/ disabled EHCI controller only. This BIOS itself may/
may not have high speed USB support. If the BIOS has high speed USB
support built in, the support will automatically turn on, when high speed device
were attached.
The Choices: Enabled (default).
USB Keyboard Support
This item allows you to enable or disable the USB Keyboard Legacy Support.
Enabled
Enable USB Keyboard Support.
Disabled (default)
Disable USB Keyboard Support.
USB Mouse Support
This item allows you to enable or disable the USB Mouse Legacy Support.
Enabled
Enable USB Mouse Support.
Disabled (default)
Disable USB Mouse Support.
21
865GV Micro 775
AC97 Audio
This item allows you to decide to enable/ disable to AC97 Audio support.
The Choices: Auto (default), Disabled.
AC97 Modem
This item allows you to decide to enable/ disable to AC97 Modem support.
The Choices: Auto (default), Disabled.
Onboard PCI LAN
This item allows you to enable or disable the Onboard PCI LAN.
The Choices: Enabled (default), Disabled.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
The Choices: Enabled (default), Disabled.
Super IO Device
Press Enter to configure the Super I/O Device.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If install and FDC or the system has no
floppy drive, select Disabled in this field.
The Choices: Enabled (default), Disabled.
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial ports.
The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3.
22
865GV Micro 775
Onboard Serial Port 2
Select an address and corresponding interrupt for the first and second serial ports
The Choices: 2F8/IRQ3 (default), Disabled, Auto, 3F8/IRQ4, 3E8/IRQ4,
2E8/IRQ3.
UART Mode Select
This item allows you to determine which Infrared (IR) function of onboard I/O
chip.
The Choices: Normal (default), ASKIR, IrDA, SCR .
UR2 Duplex Mode
Select the value required by the IR device connected to the IR port. Full-duplex
mode permits simultaneous two-direction transmission. Half-duplex mode
permits transmission in one direction only at a time.
The Choices: Half (default), Full.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
The default value is SPP.
SPP (default)
EPP
ECP
ECP+EPP
Using Parallel port as Standard Printer Port.
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
Power After Power Fail
This setting specifies whether your system will reboot after a power fail or
interrupts occurs.
Off
Leaves the computer in the power off state.
On
Reboots the computer.
Former-Sts
Restores the system to the status before power failure or
interrupt occurs.
The Choices: Off (default), On, Former-Sts.
23
865GV Micro 775
6 Power Management Setup
The Power Management Setup Menu allows you to configure your system to utilize energy
conservation and power up/power down features.
Figure 6. Power Management Setup
ACPI Function
This item displays the status of the Advanced Configuration and Power Management
(ACPI).
The Choices: Enabled (default), Disabled.
Power Management
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1.HDD Power Down.
2.Doze Mode.
3.Suspend Mode.
There are four options of Power Management, three of which have fixed mode settings
Min. Saving
Minimum power management.
Doze Mode = 1 hr.
Standby Mode = 1 hr
Suspend Mode = 1 hr.
24
865GV Micro 775
HDD Power Down = 15
min
Max Saving
Maximum power management only available for sl CPU’s.
Doze Mode = 1 min
Standby Mode = 1 min.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
User Defined (default)
Allows you to set each mode individually.
When not disabled, each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down which ranges from 1 min. to 15 min. and disable.
Video Off Method
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS (default)
Initial display power management signaling.
Video Off In Suspend
This determines the manner in which the monitor is blanked.
The Choices: Yes (default), No.
Suspend Type
Select the Suspend Type.
The Choices: Stop Grant (default), PwrOn Suspend.
MODEM Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices:3 (default)/ 4 / 5 / 7 / 9 / 10 / 11 / NA.
25
865GV Micro 775
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be
shut off.
The Choices: Disabled (default), 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min, 40Min,
1Hour.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will be
powered down while all other devices remain active.
The Choices: Disabled (default), 1Min, 2Min, 3Min, 4Min, 5Min, 6Min, 7Min, 8Min,
9Min, 10Min, 11Min, 12Min, 13Min, 14Min, 15Min.
.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
The Choices: Delay 4 Sec, Instant-Off (default).
Wake-Up by PCI card
When you select Enable, a PME signal from PCI card returns the system to Full On state.
The Choices: Enabled (default)., Disabled
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on
the modem) awakens the system from a soft off state.
The Choices: Enabled (default), Disabled
Resume by Alarm
This function is for setting date and time for your computer to boot up. During Disabled,
you cannot use this function. During Enabled,Choose the Date and Time.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose shat hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to
the operating system, before this function will work.
Reload Timer Events
Primary/Secondary IDE 0/1
You can select to enable or disable Primary or Secondary RAID 0 or
RAID 1 function under this item.
26
865GV Micro 775
The Choices: Disabled (default), Enabled.
FDD, COM, LPT Port
You can select to enable or disable FDD, COM, and LPT port under
this item.
The Choices: Disabled (default), Enabled.
PCI PIRQ [A-D]#
You can select to enable or disable PCI PIRQ [A-D]# under this item.
The Choices: Disabled (default), Enabled.
27
865GV Micro 775
7 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of
the CPU itself uses when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
Figure 7. PnP/PCI Configurations
Reset Configuration Data
The system BIOS supports the PnP feature which requires the system to record which
resources are assigned and protects resources from conflict. Every peripheral device has a
node, which is called ESCD. This node records which resources are assigned to it. The
system needs to record and update ESCD to the memory locations. These locations (4K)
are reserved in the system BIOS. If the Disabled (default) option is chosen, the system‘s
ESCD will update only when the new configuration varies from the last one. If the Enabled
option is chosen, the system is forced to update ESCDs and then is automatically set to the
“Disabled” mode.
The above settings will be shown on the screen only if “Manual” is chosen for the resources
controlled by function.
Legacy is the term, which signifies that a resource is assigned to the ISA Bus and provides
non-PnP ISA add-on cards. PCI / ISA PnP signifies that a resource is assigned to the PCI
Bus or provides for ISA PnP add-on cards and peripherals.
The Choices: Disabled (default), Enabled.
28
865GV Micro 775
Resources Controlled By
By Choosing “Auto(ESCD)” (default), the system BIOS will detect the system resources
and automatically assign the relative IRQ and DMA channel for each peripheral.By
Choosing “Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure
that there are no IRQ/DMA and I/O port conflicts.
IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending on the type
of device using the interrupt. When you press the “Press Enter” tag, you will be directed to
a submenu that will allow you to configure the system interrupts. This is only
configurable when “Resources Controlled By” is set to “Manual”.
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10
IRQ-11
IRQ-12
IRQ-14
IRQ-15
assigned to
assigned to
assigned to
assigned to
assigned to
assigned to
assigned to
assigned to
assigned to
assigned to
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI / VGA Palette Snoop
Choose Disabled or Enabled. Some graphic controllers which are not VGA compatible
take the output from a VGA controller and map it to their display as a way to provide boot
information and VGA compatibility.
However, the color information coming from the VGA controller is drawn from the palette
table inside the VGA controller to generate the proper colors, and the graphic controller
needs to know what is in the palette of the VGA controller. To do this, the non-VGA
graphic controller watch for the Write access to the VGA palette and registers the snoop
data. In PCI based systems, where the VGA controller is on the PCI bus and a non-VGA
graphic controller is on an ISA bus, the Write Access to the palette will not show up on the
ISA bus if the PCI VGA controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should only snoop
the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic
controller can then snoop the data on the ISA bus. Unless you have the above situation,
you should disable this option.
Disabled (default) Disable the function.
Enabled
Enable the function.
29
865GV Micro 775
8 PC Health Status
Figure 8. PC Health Status
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is only effective
under Windows 98 ACPI mode.
The Choices: 60°C/140°C, 65°C/149°F, 70°C/140°C, Disabled (default).
SYS FAN Control by
Choose “smart” to reduce the noise caused by the System FAN.
The Choices: SMART (default), Always On.
CPU Fan Off<℃
℃>
If the CPU Temperature is lower than the set value, FAN will turn off.
The Choices: 16 (default).
CPU Fan Start<℃
℃>
CPU fan starts to work under smart fan function when arrive this set value.
The Choices: 32(default).
CPU Fan Full speed <℃
℃>
When CPU temperature is reach the set value, the CPU fan will work under Full Speed.
The Choices: 52(default).
30
865GV Micro 775
Start PWM Value
When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan
Function mode. The range is from 0~127, with an interval of 1.
The Choices: 32 (default).
Slope PWM
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 1 PWM Value/℃
℃(default), 2 PWM Value/℃, 4 PWM Value/℃, 8 PWM
Value/℃,16 PWM Value/℃,32 PWM Value/℃, 64PWM Value/℃.
CPU Vcore,VDDPVoltage,+3.3V,+5.0V,+12.0V,Voltage Battery
Detect the system’s voltage status automatically.
Current CPU Temp
Show you the current CPU temperature.
Current CPU FAN Speed
This field displays the current CPUFAN speed.
Current SYS FAN Speed
This field displays the current speed SYSTEM fan.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status during POST
stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
31
865GV Micro 775
9 Frequency /Voltage Control
Figure 9. Frequency Control
CPU Clock Ratio
The Choices: 8 X (default).
Min= 8,Max= 50,Key in a DEC number.
Auto Detect PCI Clk
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled (default), Disabled.
Spread Spectrum
This item allows you to enable / disable spectrum for all clock.
The Choices: Enabled (default), Disabled.
32
865GV Micro 775
CPU Clock
This item allows you to select CPU Clock, and CPU over clocking.
The Choices: 100 (default).
Min= 100,Max= 255,Key in a DEC number.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
※ It’s strongly recommended to set CPU Vcore and clock in
default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.
33
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement