Biostar 945P A7B, 945PL A7B Motherboard Setup Manual

945P-A7B/945PL-A7B Setup Manual

FCC Information and Copyright

This equipment has been tes ted and found to comply with the limits of a Class

B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation. T his equipment generates , uses and can radiate radio frequency energy and, if not ins talled and used in accordance with the instructions , may cause harmful interference to radio communications . There is no guarantee that interference will not occur in a particular ins tallation.

The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this user’s manual. All the brand and produc t names are trademarks of their respec tive companies .

Table of Contents

Chapter 1: Introduction ............................................. 1

1.1

1.2

1.3

1.4

1.5

Before You Start................................................................... 1

Package Checklist................................................................ 1

Motherboard Features.......................................................... 2

Rear Panel Connectors (Ver 6.x)............................................ 4

Rear Panel Connectors (Ver 5.x)............................................ 4

1.6

1.7

Motherboard Layout (for Ver 6.x).......................................... 5

Motherboard Layout (for Ver 5.x).......................................... 6

Chapter 2: Hardware Installation.............................. 7

2.1

Installing Central Processing Unit (CPU)................................ 7

2.2

2.3

2.4

FAN Headers........................................................................ 9

Installing System Memory.....................................................10

Connectors and Slots ............................................................12

Chapter 3: Headers & Jumpers Setup .....................14

3.1

3.2

How to Setup Jumpers..........................................................14

Detail Settings.....................................................................14

Chapter 4: Useful Help .............................................19

4.1

4.2

4.3

4.4

Driver Installation Note .......................................................19

Award BIOS Beep Code........................................................20

Extra Information................................................................20

Troubleshooting...................................................................22

Chapter 5: WarpSpeeder™ .......................................23

5.1

5.2

5.3

5.4

Introduction........................................................................23

System Requirement............................................................23

Installation .........................................................................24

WarpSpeeder™....................................................................25

Appendencies: SPEC In Other Language ................32

German................................................................................................32

France..................................................................................................34

Italian..................................................................................................36

Spanish ................................................................................................38

Portuguese...........................................................................................40

Polish...................................................................................................42

RUSSIAN...............................................................................................44

ARABIC................................................................................................46

JAPANESE............................................................................................48

945P-A7B/945PL-A7B

CHAPTER 1: INTRODUCTION

1.1 B

EFORE

Y

OU

S

TART

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with sufficient lighting.

Always disconnect the computer from power outlet before operation.

Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

Keep the computer from dangerous area, such as heat source, humid air and water.

1.2 P

ACKAGE

C

HECKLIST

z FDD Cable X 1 z HDD Cable X 1 z User’s Manual X 1 z Serial ATA Cable X 1 z Fully Setup Driver CD X 1 z Rear I/O Panel for ATX Case X 1 z USB 2.0 Cable X1 (optional) z S/PDIF Cable X 1 (optional) z Serial ATA Power Switch Cable X 1 (optional)

1

Motherboard Manual

1.3 M

OTHERBOARD

F

EATURES

945P-A7B

LGA 775

945PL-A7 B

Intel Core2Duo / Pentium 4 / Pentium D /

Celeron D pr ocessor up to 3.8 GHz

LGA 775



CPU Supports Hy per -Threading

Execute Disable Bit

Enhanced Intel SpeedStep

Supports Hy per -Threading

Execute Disable Bit

Enhanced Intel SpeedStep

FSB

Extended Memor y 64 Technology

533 / 800 / 1066 MHz


533 / 800 / 1066 MHz

Chipset

Intel 945P

Intel ICH7

ITE IT8712F

Super I/O

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

IDE

Intel 945PL

Intel ICH7

ITE IT8712F

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

DIMM Slots x 4

Each DIMM supports 256/512MB & 1GB

DDR2

Max Memory C apicity 4GB

DIMM Slots x 2

Each DIMM supports 256/512MB & 1GB

DDR2

Max Memory C apicity 2GB

Dual C hannel Mode DDR 2 memory module Dual C hannel Mode DDR 2 memory module

Supports DDR2 533 / 667 Supports DDR2 400 / 533

Integrated I DE Controller

Ultra DMA 33~100 B us Master Mode supports PIO Mode 0~4,

Integrated I DE Controller

Ultra DMA 33~100 B us Master Mode supports PIO Mode 0~4,

SATA

10/100

LAN

Sound

Codec

Integrated Seri al ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

Realtek RTL 8100C

10 / 100 Mb/s auto negotiation

Half / Full duplex capability

ALC861VD(Ver 6.x) / ALC888(Ver 5.x)

5.1 channels audio out (Ver 6.x)


Intel High-Definition Audi o support

Integrated Seri al ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

Realtek RTL 8100C

10 / 100 Mb/s auto negotiation


ALC861VD(Ver 6.x) / ALC888(Ver 5.x)



Intel High-Definition Audi o support

2

Slots

On Board

945P-A7B

PCI Expr ess x 16 slot

PCI Expr ess x 1 slot

PCI slot

Floppy connector

IDE Connector

SATA Connector

Front Panel Connector

Front Audi o Connector

CD-in Connector

S/PDIF out connector

Connector CPU Fan header

System Fan header

Chassis open header (optional)

Clear CMOS header

USB connector

Power Connector (24pi n)

Power Connector (4pin)

945PL-A7 B x1 PCI Expr ess x 16 slot x2 PCI Expr ess x 1 slot x3 PCI slot

945P-A7B/945PL-A7B x1 Floppy connector x1 IDE Connector x4 SATA Connector x1 Front Panel Connector x1 Front Audi o Connector x1 CD-in Connector x1 S/PDIF out connector x1 CPU Fan header x1 System Fan header x1 Chassis open header (optional) x1 Clear CMOS header x2 USB connector x1 Power Connector (24pi n) x1 Power Connector (4pin) x1 x2 x3

PS/2 Keyboard

PS/2 Mouse

Serial Port

Back Panel Printer Port

I/O LAN port

USB Port

Audio Jack (Ver 6.x)

Audio Jack (Ver 5.x) x1 x1 x1 x1 x1 x4 x3 x6

PS/2 Keyboard

PS/2 Mouse

Serial Port

Printer Port

LAN port

USB Port



Board Size 205 (W) x 305 (L) mm

OS

Support

205 (W) x 305 (L) mm

Windows 2000 / XP / VISTA Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove Biostar Reserves the ri ght to add or remove support for any OS with or without notice. support for any OS with or without notice. x1 x1 x1 x1 x1 x4 x3 x6 x1 x1 x1 x1 x1 x1 x1 x4 x1 x1 x1 x2 x1 x1

3


1.4 R

EAR

P

ANEL

C

ONNECTORS

(V

ER

6.

X

)

PS/2

Mouse Printer Port LAN

PS/2

Keyboard

COM1 USBX2 USBX2

1.5 R

EAR

P

ANEL

C

ONNECTORS

(V

ER

5.

X

)

PS/2

Mouse Pr inter Port LA N

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

4

PS/2

Keybo ard

COM1 USBX2 USB X2

Cente r

Re ar

Line In

Line Out

Side Mic In

Since the audio c hip s upports Intel High Definition Audi o Specification, the function of each audi o jac k c an be defined by software. The input / output function of each audio jac k listed above represents the default setti ng. However, when c onnecti ng exter nal microphone to the audi o port, pl eas e us e the Line In (blue) and Mic In (Pi nk) audio jac k.

945P-A7B/945PL-A7B

1.6 M

OTHERBOARD

L

AYOUT

(

FOR

V

ER

6.

X

)

JKBMS1

LGA775

CPU1

JATX PWR2

JCFA N1

JRJ45 USB1

Intel

945P or

945PL

JA UDIO 1

JAUDIOF1

JCDIN1

Codec

JATX PWR1

PEX16_1

PEX1_1

Intel

ICH7

Super

I/O

PEX1_2

BAT1

BIOS

PCI1

PCI2

10 /1 00 LA N

PCI3

FDD1

JSP DI F_OUT

Not e: ■ represents the 1 st pin.

SATA1

JCI1(Opt ional)

SATA3

JSFAN1

JCMOS1 SATA2 SATA4

JPA NEL1

5


1.7 M

OTHERBOARD

L

AYOUT

(

FOR

V

ER

5.

X

)

JKBMS1

LGA775

CPU1

JATXPWR2

JCFAN1

JRJ45 USB1

Intel

945P or

945PL

JAUDIO2

JAUDIOF1

JATXPWR1

6

JCDIN1

Codec PEX16_1

PEX1_1

Intel

ICH7

Super

I/O

PEX1_2

BAT1

BIOS

PCI1

PCI2

10 /1 00 LA N PCI3

FDD1

JSPDIF_OUT

Not e: ■ represents the 1 st pin.

SATA1

JCI1(Optional)

SATA3

JSFAN1

JCMOS1 SATA2 SATA4

JPANEL1

945P-A7B/945PL-A7B

CHAPTER 2: HARDWARE INSTALLATION

2.1 I

NSTALLING

C

ENTRAL

P

ROCESSING

U

NIT

(CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the

empty socket to ensure pin legs won’t be damaged.

Pin-Cap

Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.

7


Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation.

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.

8

945P-A7B/945PL-A7B

2.2 FAN H

EADERS

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to pin#1.

JC FAN1: C PU Fan Heade r

JCFAN1

4

1

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Fan

Control

JSFAN1: System Fan He ader

JSFAN1

3 1

Pin

Assignment

1 Ground

2 +12V

3 FAN RPM rate sense

Note:

The JCFAN1 and JSFAN1 s upport 4-pin and 3-pin head connec tor. When connecting with wires onto c onnectors, please note that the red wire is the positi ve and s houl d be connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND.

9


2.3 I

NSTALLING

S

YSTEM

M

EMORY

A. Memory Modules

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

10

B. Memory Capacity

For 945P-A7B

DIMM Socket

Location

DDR Module

945P-A7B/945PL-A7B

Total Memory Size

For 945PL-A7B

DIMM Socket

Location

DDR Module Total Memory Size

C. Dual Channel Memory installation

To trigger the Dual Channel f unction of the motherboard, the memory module must meet the following requirements:

Install memory module of the same density in pairs, shown in the f ollowing table.

For 945P-A7B

Dual Channel Status DDR2_A1 DDR2_A2 DDR2_B1 DDR2_B2

Enabled O X O X

Enabled X O X O

Enabled O O O O

For 945PL-A7B

Dual Channel Status DDR2_A1 DDR2_B1

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or x16)

11


2.4 C

ONNECTORS AND

S

LOTS

FDD1: Floppy Disk C onne ctor

The motherboard prov ides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables.

33

34

1

2

ID E1: Hard Disk C onne ctors

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO

Mode 0~4, Bus Master, and Ultra DMA 33/66/100 functionality.

The IDE connectors can connect a master and a slav e driv e, so y ou can connect up to four hard disk drives. The f irst hard drive should always be connected to

IDE1.

40

IDE1

39

2 1

12

945P-A7B/945PL-A7B

PEX16_1: PC I-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally.

PEX1_1/PEX1_2: PC I-Express x1 Slots

- PCI-Express 1.0a compliant.

-

-

-

Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.

PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

2X bandwidth ov er the traditional PCI architecture.

PEX16_1

PEX1_1

PEX1_2

PC I1~PC I3: Pe riphe ral Component Interconne ct Slots

This motherboard is equipped with 3 standard PCI slots. PCI stands f or

Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

PCI3

13


CHAPTER 3: HEADERS & JUM PERS SETUP

3.1 H

OW TO

S

ETUP

J

UMPERS

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

14

Pin closed Pin1-2 closed

3.2 D

ETAIL

S

ETTINGS

JPANEL1: Front Panel Heade r

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

9

1

SLP

PWR_LED

On/Off

+ + -

16

8

+ -

SPK RST

HLED

Pin Assignment Functio n Pin Assignment

1 +5V

2 N/A

3 N/A

4 Speaker

Speaker connector

10 Ground

11 N/A

12 Power LED (+)

5 HDD LED (+)

6 HDD

7 Ground control

Hard drive LED

Reset button

13

14

Power LED (+)

Power LED (-)

16 Ground

Functio n

Sleep button

N/A

Power LED

Power-on button

945P-A7B/945PL-A7B

JATXPW R1: ATX Powe r Source C onne ctor

This connector allows user to connect 24-pin power connector on the ATX power supply.

13

24

1

12

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

9 Standby

+5V

10 +12V

11 +12V

12 2 x 12 Detect

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 -5V

21 +5V

22 +5V

23 +5V

24 Ground

JATXPW R2: ATX Powe r Source C onne ctor

By connecting this connector, it will provide +12V to CPU power circuit.

1

2

4

3

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

15


JUSB3/JUSB4: Heade rs for USB 2.0 Ports at Front Panel

This motherboard prov ides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB dev ices, like USB card reader.

Pin Assignment

JUSB3 JUSB4

2 10

1 9

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

JAUDIO F1: Front Panel Audio Heade r

This header allows user to connect the front audio output cable with the PC f ront panel. It will disable the output on back panel audio connectors.

1 2

Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

9 10

8 Key

9 Left line in

JC DIN1: CD-RO M Audio-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

4 1

Pin Assignment

Channel

Input

2 Ground

3 Ground

4 Right

Input

16

945P-A7B/945PL-A7B

JC MO S1: Cle ar C MOS Heade r

By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard.

3 1

Pin 1-2 Close:

Normal Operation (Default).

3 1

3 1

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1.

2.

3.

4.

5.

Remov e AC power line.

Set the jumper to “Pin 2-3 close”.

Wait f or f ive seconds.

Set the jumper to “Pin 1-2 close”.

Power on the AC.

6. Reset your desired password or clear the CMOS data.

JC I1: Chassis O pen Heade r (Optional)

This connector allows system to monitor PC case open status. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up.

Pin Assignment

1 Case signal

2 Ground

2 1

17


SATA1~SATA4: Se rial ATA Connectors

The motherboard has a PCI to SATA Controller with 4channels SATA interf ace, it satisfies the SATA 2.0 spec and with transfer rate of 3Gb/s.

SATA1

7

SATA2

4

SATA3

1

SATA4

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

JSPDIF_O UT: Digital Audio out C onne ctors

This connector allows user to connect the PCI bracket SPDIF output header.

Pin Assignment

1 +5V

2 SPDIF_OUT

3 Ground

1 3

18

945P-A7B/945PL-A7B

CHAPTER 4: USEFUL HELP

4.1 D

RIVER

I

NSTALLATION

N

OTE

After you installed your operating system, please insert the Fully Setup

Driver CD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the CD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system.

Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver

CD. Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat R eader to open the manual file. Pleas e download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep 2.html

19


4.2 A

WARD

BIOS B

EEP

C

ODE

Beep Sound

One long beep followed by two short beeps

High-low siren sound

Meaning

Video card not found or v ideo card memory bad

CPU overheated

System will shut down automatically

One Short beep when system boot-up No error found during POST

Long beeps every other second No DRAM detected or install

4.3 E

XTRA

I

NFORMATION

After you fail to update BIOS or BIOS is invaded by virus, the

Boot-Block function will help to restore BIOS. If the following message is shown after boot-up the system, it means the BIOS contents are corrupted.

In this Case, please follow the procedure below to restore the BIOS:

1. Make a bootable floppy disk.

2. Download the Flash Utility “AWDFLASH.exe” from the Biostar website: www.biostar.com.tw

3. Confirm motherboard model and download the respectively BIOS from Biostar website.

4. Copy “AWDFLASH.exe” and respectively BIOS into floppy disk.

5. Insert the bootable disk into floppy drive and press Enter.

6. System will boot-up to DOS prompt.

7. Type in DOS prompt.

(xxxx means BIOS name.)

8. System will update BIOS automatically and restart.

9. The BIOS has been recovered and will work properly.

20

945P-A7B/945PL-A7B

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

21


4.4 T

ROUBLESHOOTING

Probable Solution

1. No power to the system at all 1. Make sure power cable is

Power light don’t illuminate, f an inside power supply does not turn on. 3. Contact technical support.

2. Indicator light on key board does not turn on. securely plugged in.

System inoperativ e. Keyboard lights are on, power indicator lights are lit, and hard driv e is spinning.

Using even pressure on both ends of the DIMM, press down firmly until the module snaps into place.

System does not boot from hard disk driv e, can be booted f rom optical driv e.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

System only boots f rom optical driv e.

Hard disk can be read and applications can be used but booting from hard disk is impossible.

1. Back up data and applications f iles.

2. Ref ormat the hard driv e.

Re-install applications and data using backup disks.

Screen message says “Invalid

Conf iguration” or “CMOS Failure.”

Cannot boot system after installing second hard driv e.

Rev iew system’s equipment. Make sure correct inf ormation is in setup.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives.

22

CHAPTER 5:

WARPSPEEDER™

945P-A7B/945PL-A7B

5.1 I

NTRODUCTION

[WarpSpeeder™], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage

Manager, and Hardware Monitor.

With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The

Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about

BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel.

Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang,

[WarpSpeeder™] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one.

5.2 S

YSTEM

R

EQUIREMENT

OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP

DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install

DirectX 8.1.)

23


5.3 I

NSTALLATION

1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install.

2. When you see the following dialog in setup procedure, it means setup is completed. If the “Launch the WarpSpeeder Tray Utility” checkbox is checked, the Tray Icon utility and [WarpSpeeder™] utility will be automatically and immediately launched after you click “Finish” button.

24

Usage :

The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand.

945P-A7B/945PL-A7B

5.4 W

ARP

S

PEEDER

™

1. Tray Icon:

Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.

This utility is responsible for conveniently invoking [WarpSpeeder™]

Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The “Launch Utility” item in the popup menu has the same function as mouse left-click on tray icon and “Exit” item will close

Tray Icon utility if selected.

25


2. Main Panel

If you click the tray icon, [WarpSpeeder™] utility will be invoked.

Please refer to the following figure; the utility’s first window you will see is Main Panel.

Main Panel contains fe ature s as follows:

a. Display the CPU Speed, CPU external clock, Memory clock, AGP clock, and PCI clock information. b. Contains About, Voltage, Overclock, and Hardware Monitor Buttons for invoking respective panels. c. With a user-friendly Status Animation, it can represent 3 overclock percentage stages:

Man walking→overclock percentage from 100% ~ 110 %

Panther running→overclock percentage from 110% ~ 120%

Car racing→overclock percentage from 120% ~ above

26

945P-A7B/945PL-A7B

3. Voltage Panel

Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure.

In this panel, you can decide to increase CPU core voltage and

Memory voltage or not. The default setting is “No”. If you want to get the best performance of overclocking, we recommend you click the option “Yes”.

27


4. Overclock Panel

Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.

28

O ve rclock Panel contains the these features:

a. “–3MHz button”, “-1MHz button”, “+1MHz button”, and “+3MHz button”: provide user the ability to do real-time overclock adjustment.

Warning:

Manually overclock is potentially dangerous, especially when the ov erclocking percentage is over 110 %. We strongly recommend you v erify ev ery speed you overclock by click the Verify button. Or, you can just click Auto ov erclock button and let [WarpSpeeder™] automatically gets the best result f or y ou. b. “Recovery Dialog button”: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot.

945P-A7B/945PL-A7B c. “Auto-overclock button”: User can click this button and

[WarpSpeeder™] will set the best and stable performance and frequency automatically. [WarpSpeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the

[WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting. d. “Verify button”: User can click this button and [WarpSpeeder™] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder™] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialog’s setting.

Note:

Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure y our display card’s color depth is High color (16 bit) or True color( 24/32 bit ) that is required f or Direct3D rendering.

5. Hardware Monitor Panel

Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure.

In this panel, you can get the real-time status information of your system. The information will be refreshed every 1 second.

29


6. About Panel

Click the “about” button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure.

In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboard’s BIOS model and the Version number of

[WarpSpeeder™] utility.

30

Note :

Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder™] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels’ functions. This property can make [WarpSpeeder™] utility more robust.

945P-A7B/945PL-A7B

This page is intentionally left blank.

31


APPENDENCIES: SPEC IN OTHER LANGUAGE

G

ERMAN

CPU

FSB

Chipsatz

Super E/A

945P-A7B 945PL-A7 B

LGA 775 LGA 775

Intel Core2Duo / Pentium 4 / Pentium D / Intel Core2Duo / Pentium 4 / Pentium D /

Celeron D Pr ozessoren mit bis zu 3,8 GHz

Unterstützt Hyper-Threading

Celeron D Pr ozessoren mit bis zu 3,8 GHz

Unterstützt Hyper-Threading

Execute Disable Bit

Enhanced Intel SpeedStep®

Execute Disable Bit



533 / 800 / 1066 MHz

Intel 945P

Intel ICH7

ITE 8712F

Hardware-Überwachung

Lüfterdrehzahl-Controller


533 / 800 / 1066 MHz

Intel 945PL

Intel ICH7

ITE 8712F

Hardware-Überwachung

Lüfterdrehzahl-Controller

"Smart Guar dian"-Funktion v on ITE "Smart Guar dian"-Funktion v on ITE

DDR2 DIMM-Steckplätze x 4 DDR2 DIMM-Steckplätze x 2

Jeder DIMM unterstützt 128/256/512MB & Jeder DIMM unterstützt 256/512MB & 1GB

Arbeitsspeic 1GB DDR2 her Max. 4GB Ar beitsspeicher

IDE

Dual-Kanal DDR Speichermodul

Unterstützt DDR2 533 / 667

Integrierter IDE-Controller

DDR2

Max. 2GB Ar beitsspeicher

Dual-Kanal DDR Speichermodul

Unterstützt DDR2 400 / 533

Integrierter IDE-Controller

Ultra DMA 33 / 66 / 100 Bus Master-Modus Ultra DMA 33 / 66 / 100 Bus Master-Modus

Unterstützt PIO-Modus 0~4 Unterstützt PIO-Modus 0~4

SATA

LAN

Integrierter Serial ATA-Controller

Datentransferr ate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation

Version 2.0

Realtek 8100C

10 / 100 Mb/s A uto-Negotiation

Integrierter Serial ATA-Controller

Datentransferr ate bis zu 3.0Gb/s

Konform mit der SATA-Spezifikation

Version 2.0

Realtek 8100C

10 / 100 Mb/s A uto-Negotiation

Audio-Code c

Halb-/ Vollduplex-Funktion

ALC861VD(VER 6.X) / ALC888(VER 5.X)

5.1-Kanal-Audioausgabe (VER 6.X)


Unterstützt Intel High-Definition Audi o

Halb-/ Vollduplex-Funktion




Unterstützt Intel High-Definition Audi o

32

945P-A7B

PCI Expr ess x16 Steckplatz

Steckplätze PCI Expr ess x1 Steckplatz x1 x2

945P-A7B/945PL-A7B

945PL-A7 B

PCI Expr ess x16 Steckplatz

PCI Expr ess x1 Steckplatz x1 x2

Onboard-An S/PDIF Ei ngangsanschluss schluss x1 S/PDIF Ei ngangsanschluss x1

"Gehäuse offen"-Sockel (optional) x1

"CMOS löschen"-Sockel x1

"Gehäuse offen"-Sockel (optional) x1

"CMOS löschen"-Sockel x1

Rückseiten-

E/A

Stromanschluss (24-polig)

Stromanschluss (4-poli g)

PS/2-Tastatur

PS/2-Maus

Serieller Anschluss x1 x1 x1 x1 x1

Stromanschluss (24-polig)

Stromanschluss (4-poli g)

PS/2-Tastatur

PS/2-Maus

Serieller Anschluss x1 x1 x1 x1 x1

Audioanschluss (Ver 6.x)

Audioanschluss (Ver 5.x) x3 x6

Platinengr ö

ße.

205 mm (B) X 305 mm (L)

OS-Unterst

ützung

Windows 2000 / XP / VISTA

Biostar behält sich das Recht v or, ohne

Ankündigung die Unterstützung für ei n

Betriebssystem hinzuzufügen oder zu entfernen.



205 mm (B) X 305 mm (L) x3 x6


Biostar behält sich das Recht v or, ohne

Ankündigung die Unterstützung für ei n

Betriebssystem hinzuzufügen oder zu entfernen.

33


F

RANCE

UC

945P-A7B

LGA 775

Processeurs Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D jusqu'à 3,8 GHz

Prend en charge les technologies

Hyper -Threading d'exécution de bit de désactivation

Intel SpeedStep® optimisée de mémoire étendue 64

Bus frontal 533 / 800 / 1066 MHz

Chipset

Intel 945P

Intel ICH7

LAN

Codec audio

945PL-A7 B

LGA 775

Processeurs Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D jusqu'à 3,8 GHz

Prend en charge les technologies

Hyper -Threading d'exécution de bit de désactivation

Intel SpeedStep® optimisée de mémoire étendue 64

533 / 800 / 1066 MHz

Intel 945PL

Intel ICH7

ITE 8712F

Super E/S

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien i ntelligent" de l'ITE

Mémoire principale

ITE 8712F

Moniteur de matériel

Contrôleur de vitesse de ventilateur

Fonction "Gardien i ntelligent" de l'ITE

Fentes DDR2 DIMM x 4 Fentes DDR2 DIMM x 2

Chaque DIMM prend en char ge des DDR de Chaque DIMM prend en charge des DDR2

256/512 Mo et 1Go

Capacité mémoire maximale de 4 Go de 256/512 Mo et 1Go

Capacité mémoire maximale de 2 Go

Module de mém oire DDR à mode à double Module de mém oire DDR à mode à double voie voie

Prend en charge la DDR 2 533 / 667 Prend en charge la DDR 2 400 / 533

IDE

SATA

Contrôleur IDE intégr é Contrôleur IDE intégr é

Mode pri ncipale de Bus Ultra DMA 33 / 66 / Mode pri ncipale de Bus Ultra DMA 33 / 66 /

100

Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :

Taux de transfert jusqu'à 3.0 Go/s.

Conforme à la spécification SATA Version

2.0

100

Prend en charge le mode PIO 0~4,

Contrôleur Serial ATA intégré :

Taux de transfert jusqu'à 3.0 Go/s.

Conforme à la spécification SATA Version

2.0

Realtek 8100C

10 / 100 Mb/s négociation automatique



Sortie audio à 5.1 voies (VER 6.X)


Prise en c harge de l'audio haute définition

Intel

Realtek 8100C

10 / 100 Mb/s négociation automatique





Prise en c harge de l'audio haute définition

Intel

34

945P-A7B/945PL-A7B

Fentes

945P-A7B

Fente PCI Express x 16

Fente PCI Express x 1

Fente PCI

945PL-A7 B x1 Fente PCI Express x 16 x2 Fente PCI Express x 1 x3 Fente PCI x1 x2 x3 x1 Connecteur de disquette x1 Connecteur IDE x4 Connecteur SATA x1 Connecteur du panneau avant

Connecteu

Connecteur Audio du panneau avant x1 Connecteur Audio du panneau avant x1

Connecteur d'entrée CD x1 Connecteur d'entrée CD x1

Connecteur de sortie S/PDIF

Embase de ventilateur UC x1 x1

Connecteur de sortie S/PDIF

Embase de ventilateur UC x1 x1 r embarqué

Connecteur de disquette

Connecteur IDE

Connecteur SATA

Connecteur du panneau avant

Embase de ventilateur système

Embase d' ouvertur e de châssis

(optional)

Embase d'effacement CMOS x1 x1

Embase de ventilateur système

Embase d' ouvertur e de châssis

(optional) x1 Embase d'effacement CMOS x1 x1 x4 x1 x1 x1 x1 x2 Connecteur USB

Connecteur d'alimentation

(24 broches)

Connecteur d'alimentation

(4 br oches) x2 Connecteur USB

Connecteur d'alimentation x1 (24 broches)

Connecteur d'alimentation x1 (4 br oches) x1 x1

E/S du panneau arrière

Clavier PS/2

Souris PS/2

Port série

Port d'imprimante

Port LAN

Port USB

Fiche audio (Ver 6.x)


Dimension s de la carte

205mm (l) X 305 mm (H)

Support

SE


Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. x1 x4 x3 x6 x1 x1 x1 x1

Clavier PS/2

Souris PS/2

Port série

Port d'imprimante

Port LAN

Port USB



205mm (l) X 305 mm (H)


Biostar se réserve le droit d'ajouter ou de supprimer le support de SE avec ou sans préavis. x1 x4 x3 x6 x1 x1 x1 x1

35


I

TALIAN

CPU

945P-A7B

LGA 775

Processore Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D fino a 3.8 GHz

Supporto di Hyper -Threadi ng

Execute Disable Bit


Tecnologia Extended M emory 64

945PL-A7 B

LGA 775

Processore Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D fino a 3.8 GHz

Supporto di Hyper -Threadi ng

Execute Disable Bit


Tecnologia Extended M emory 64

FSB

Chipset

533 / 800 / 1066 MHz

Intel 945P

I ntel ICH7

533 / 800 / 1066 MHz

Intel 945PL

I ntel ICH7

ITE 8712F

Super I/O

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart Guardi an" di I TE

Alloggi DIMM DDR 2 x 4

ITE 8712F

Monitoraggio hardware

Controller velocità ventolina

Funzione "Smart Guardi an" di I TE

Alloggi DIMM DDR 2 x 2

Ciascun DIMM supporta DDR2 256/512MB e Ciascun DIMM supporta DDR2 256/512MB e

Memoria principale

1GB

Capacità massima della memori a 4GB

Modulo di memoria DDR a canale doppio

Supporto di DDR2 533 / 667

1GB

Capacità massima della memori a 2GB

Modulo di memoria DDR a canale doppio

Supporto di DDR2 400 / 533

IDE

SATA

LAN

Codec audio

Controller IDE i ntegrato

Modalità Bus Master Ultra DMA 33 / 66 /

100

Supporto modalità PIO Mode 0-4

Controller IDE i ntegrato

Modalità Bus Master Ultra DMA 33 / 66 /

100

Supporto modalità PIO Mode 0-4

Controller Serial ATA integrato Controller Serial ATA integrato

Velocità di trasferimento dei dati fi no a 3.0 Velocità di trasferimento dei dati fi no a 3.0

Gb/s.

Compatibile specifiche SATA Versione 2.0.

Gb/s.

Compatibile specifiche SATA Versione 2.0.

Realtek 8100C

Negoziazione automatica 10 / 100 Mb/s

Capacità Half / Full Duplex


Uscita audio 5.1 canali (VER 6.X)


Supporto audio High-Defi nition (HD) Intel

Realtek 8100C

Negoziazione automatica 10 / 100 Mb/s

Capacità Half / Full Duplex




Supporto audio High-Defi nition (HD) Intel

36

945P-A7B/945PL-A7B

Alloggi

945P-A7B

Alloggio PCI Ex press x16

Alloggio PCI Ex press x1

Alloggio PCI

945PL-A7 B x1 Alloggio PCI Ex press x16 x2 Alloggio PCI Ex press x1 x3 Alloggio PCI

Connettore floppy

Connettore IDE

Connettore SATA

Connettore pannello frontale x1 Connettore floppy x1 Connettore IDE x4 Connettore SATA x1 Connettore pannello frontale

Connettore audio frontale

Connettore CD-in x1 Connettore audio frontale x1 Connettore CD-in x1 x1

Connettori su scheda

Connettore output SPDIF

Collettore ventolina CPU

Collettore ventolina sistema x1 Connettore output SPDIF x1 Collettore ventolina CPU x1 Collettore ventolina sistema x1 x1 x1

Collettore apertur a telaio (optional) x1 Collettore apertur a telaio (optional) x1 x1 x1 x4 x1

Collettore cancellazione CMOS

Connettore USB x1 Collettore cancellazione CMOS x2 Connettore USB x1 x2

Connettore alimentazione (24 pin) x1 Connettore alimentazione (24 pin) x1

Connettore alimentazione (4 pi n) x1 Connettore alimentazione (4 pi n) x1 x1 x2 x3

Tastiera PS/2

Mouse PS/2

Porta seriale

I/O

Porta stampante pannello posteriore

Porta LAN

Porta USB

Connettore audio (Ver 6.x)

Connettore audio (Ver 5.x) x1 x1 x1 x1 x1 x4 x3 x6

Tastiera PS/2

Mouse PS/2

Porta seriale

Porta stampante

Porta LAN

Porta USB



Dimension

205 mm (larghezza) x 305 mm (altezza) 205 mm (larghezza) x 305 mm (altezza) i scheda


Sistemi

Biostar si riserva il diritto di aggiungere o operativi supportati rimuovere il supporto di qualsiasi sistema operativo senza preavviso.


Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema operativo senza preavviso. x1 x4 x3 x6 x1 x1 x1 x1

37


S

PANISH

LGA 775

945P-A7B

CPU

Procesador I ntel Core2Duo / Penti um 4 /

Pentium D / Celeron D hasta 3,8 GHz

Admite Hyper -Threadi ng

Bit de des habilitación de ejecución

Intel SpeedStep® Mejorado

Tecnología Extended M emory 64

FSB

Conjunto de chips

533 / 800 / 1066 MHz

Intel 945P

Intel ICH7

ITE 8712F

Súper E/S

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de I TE

Memoria principal

IDE

SATA

945PL-A7 B

LGA 775

Procesador I ntel Core2Duo / Penti um 4 /

Pentium D / Celeron D hasta 3,8 GHz

Admite Hyper -Threadi ng

Bit de des habilitación de ejecución

Intel SpeedStep® Mejorado

Tecnología Extended M emory 64

533 / 800 / 1066 MHz

Intel 945PL

Intel ICH7

ITE 8712F

Monitor hardware

Controlador de velocidad de ventilador

Función "Guardia inteligente" de I TE

Ranuras DIMM DDR 2 x 4 Ranuras DIMM DDR 2 x 2

Cada DIMM admite DDR 2 de 256/512MB y Cada DIMM admite DDR 2 de 256/512MB y

1GB

Capacidad máxima de memoria de 4GB

Módulo de memoria DDR de canal Doble

1GB

Capacidad máxima de memoria de 2GB

Módulo de memoria DDR de canal Doble

Admite DDR2 533 / 667

Controlador IDE integrado

Admite DDR2 de 400 / 533


Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100

Soporte los Modos PIO 0~4. Soporte los Modos PIO 0~4.

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3.0 Gb/s.

Compatible con la versión SATA 2.0.

Controlador ATA Serie Integrado

Tasas de transferencia de hasta 3.0 Gb/s.

Compatible con la versión SATA 2.0.

Red Local

Realtek 8100C

Negociación de 10 / 100 M b/s

Realtek 8100C

Negociación de 10 / 100 M b/s

Funciones Half / F ull dúplex Funciones Half / F ull dúplex

Códecs de Salida de sonido de 5.1 canales (VER 6.X) sonido


Salida de sonido de 7.1 canales (VER 5.X)

Soporte de soni do I ntel de Alta Defi nición




Soporte de soni do I ntel de Alta Defi nición

38

Ranuras

945P-A7B

Ranura PCI Ex press x16

Ranura PCI Ex press x1

Ranura PCI

945PL-A7 B x1 Ranura PCI Ex press x16 x2 Ranura PCI Ex press x1

X3 Ranura PCI

945P-A7B/945PL-A7B x1 x2

X3

Conector disco flexible

Conector IDE

Conector SATA

Conector de panel frontal

Conector de sonido frontal

Conector de entrada de C D

Conector de salida S/PDIF

X1 Conector disco flexible

X1 Conector IDE

X4 Conector SATA

X1 Conector de panel frontal

X1 Conector de sonido frontal

X1 Conector de entrada de C D

X1 Conector de salida S/PDIF

Conectore Cabecera de ventilador de C PU X1 Cabecera de ventilador de C PU X1 s en placa Cabecera de ventilador de sistema X1 Cabecera de ventilador de sistema X1

Cabecera de chasis abi erto(opcional) X1 Cabecera de chasis abi erto(opcional) X1

Cabecera de borrado de CMOS

Conector USB

X1

X2

Cabecera de borrado de CMOS

Conector USB

X1

X2

Conector de alimentación

(24 patillas)


X1

X1


(24 patillas)


(4 patillas)

Teclado PS/2

X1

X1

(4 patillas)

Teclado PS/2

Ratón PS/2

Panel trasero de

Puerto de impr esora

Puerto de red local

E/S

Puerto serie

Puerto USB

X1

X1

X1

X1

X1

X4

Ratón PS/2

Puerto serie

Puerto de impr esora

Puerto de red local

Puerto USB

X1

X1

X1

X1

X1

X4

Conector de sonido (Ver 6.x)


X3

X6



X3

X6

Tamaño de

205 mm. (A) X 305 mm. (H) la placa

205 mm. (A) X 305 mm. (H)

Soporte de


Biostar se reserva el derecho de añadir o sistema retirar el soporte de cualquier SO con o sin operativo aviso previo.


Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo.

X1

X1

X4

X1

X1

X1

X1

39


P

ORTUGUESE

CPU

FSB

945P-A7B

LGA 775

Processador Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D até 3,8 GHz

Suporta as tecnologias Hyper -Threading

Execute Disable Bit


Extended Memor y 64

533 / 800 / 1066 MHz

945PL-A7 B

LGA 775

Processador Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D até 3,8 GHz

Suporta as tecnologias Hyper -Threading

Execute Disable Bit


Extended Memor y 64

533 / 800 / 1066 MHz

Chipset

Intel 945P

Intel ICH7

Especificaç

ITE 8712F

ão Super

Monitorização do hardware

I/O

Controlador da velocidade da v entoinha

Função "Smart Guardian" da I TE

Ranhuras DIMM DDR2 x4

Intel 945PL

Intel ICH7

ITE 8712F

Monitorização do hardware

Controlador da velocidade da v entoinha

Função "Smart Guardian" da I TE

Ranhuras DIMM DDR2 x2

Memória

Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB principal Capacidade máxima de memória: 4 GB

Cada módulo DIMM suporta uma memória

DDR2 de 256/512 MB & 1 GB

Capacidade máxima de memória: 2 GB

IDE

Módulo de memória DDR de canal duplo

Suporta módulos DDR2 533 /667


Módulo de memória DDR de canal duplo

Suporta módulos DDR2 400 / 533


Modo Bus master Ultra DMA 33 / 66 / 100

Suporta o modo PIO 0~4.

Modo Bus master Ultra DMA 33 / 66 / 100

Suporta o modo PIO 0~4.

SATA

LAN

Codec de som

Controlador Serial ATA integrado

Velocidades de transmissão de dados até

Controlador Serial ATA integrado

Velocidades de transmissão de dados até

3.0 Gb/s.

Compatibilidade com a especificação SATA

3.0 Gb/s.

Compatibilidade com a especificação SATA versão 2.0.

Realtek 8100C

Auto negociação de 10 / 100 Mb/s

Capacidade semi/full-duplex versão 2.0.

Realtek 8100C

Auto negociação de 10 / 100 Mb/s

Capacidade semi/full-duplex


Saída de áudio de 5.1 canais (VER 6.X)


Suporta a especificação Intel

High-Defi nition Audio




Suporta a especificação Intel

High-Defi nition Audio

40

945P-A7B/945PL-A7B

Ranhuras

945P-A7B

Ranhura PCI Express x 16

Ranhura PCI Express x 1

Ranhura PCI

945PL-A7 B x1 Ranhura PCI Express x 16 x2 Ranhura PCI Express x 1 x3 Ranhura PCI x1 x2 x3

Conector da unidade de disquetes x1 Conector da unidade de disquetes x1

Conector IDE x1 Conector IDE x1

Conector SATA

Conector do pai nel frontal

Conector de áudio frontal x4 Conector SATA x1 Conector do pai nel frontal x1 Conector de áudio frontal x4 x1 x1

Conector para entrada de C Ds x1 Conector para entrada de C Ds x1

Conectore

Conector de saída S/PDIF s na placa

Conector da ventoinha da CPU x1 Conector de saída S/PDIF x1 Conector da ventoinha da CPU x1 x1

Conector da ventoinha do sistema x1 Conector da ventoinha do sistema x1

Conector para detecção da Conector para detecção da abertura do chassis (opcional)

Conector para limpeza do CMOS x1 abertura do chassis (opcional) x1 Conector para limpeza do CMOS x1 x1

Conector USB x2 Conector USB x2

Conector de alimentação (24 pi nos) x1 Conector de alimentação (24 pi nos) x1

Conector de alimentação (4 pinos) x1 Conector de alimentação (4 pinos) x1

Entradas/

Saídas no painel

Porta série

Porta para impressora

Porta LAN traseiro

Teclado PS/2

Rato PS/2

Porta USB

Tomada de audio (Ver 6.x)

Tomada de audio (Ver 5.x) x1 x1 x1 x1 x1 x4 x3 x6

Teclado PS/2

Rato PS/2

Porta série

Porta para impressora

Porta LAN

Porta USB



Tamanho da pl aca

205 mm (L) X 305 mm (A) 205 mm (L) X 305 mm (A)

Sistemas Windows 2000 / XP / VISTA operativos A Biostar reserva-se o direito de adicionar


A Biostar reserva-se o direito de adicionar suportado s ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema operativo com ou sem aviso prévio. operativo com ou sem aviso prévio. x1 x1 x1 x1 x1 x4 x3 x6

41


P

OLISH

Procesor

FSB

Chipset

945P-A7B

LGA 775

Procesor Intel Cor e2Duo / Pentium 4 /

Pentium D / Celeron D do 3,8 GHz

Obsługa Hy per-Threading

Execute Disable Bit



533 / 800 / 1066 MHz

Intel 945P

Intel ICH7

Gniazda DDR 2 DIMM x 4

Każde gniazdo DIMM obsługuje moduły

945PL-A7 B

LGA 775

Procesor Intel Cor e2Duo / Pentium 4 /

Pentium D / Celeron D do 3,8 GHz

Obsługa Hy per-Threading

Execute Disable Bit



533 / 800 / 1066 MHz

Intel 945PL

Intel ICH7

Gniazda DDR 2 DIMM x 2

Każde gniazdo DIMM obsługuje moduły

Pamięć główna

ITE 8712F

Monitor H/W

Super I/O

Kontroler prędkości wentylatora

IDE

256/512MB oraz 1GB DDR 2

Maks. wielkość pamięci 4GB

Moduł pamięci DDR z trybem podwójnego kanału

Obsługa DDR2 533 / 667

Funkcja ITE "Smart Guar dian"

Zintegrowany kontroler IDE

Ultra DMA 33 / 66 / 100 Try b Bus Master obsługa PIO tryb 0~4

256/512MB oraz 1GB DDR 2

Maks. wielkość pamięci 2GB

Moduł pamięci DDR z trybem podwójnego kanału

Obsługa DDR2 400 / 533

ITE 8712F

Monitor H/W

Kontroler prędkości wentylatora

Funkcja ITE "Smart Guar dian"

Zintegrowany kontroler IDE

Ultra DMA 33 / 66 / 100 Try b Bus Master obsługa PIO tryb 0~4

SATA

LAN

Zintegrowany kontroler Serial ATA

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji

2.0.

Zintegrowany kontroler Serial ATA

Transfer danych do 3.0 Gb/s.

Zgodność ze specyfikacją SATA w wersji

2.0.

Realtek 8100C

10 / 100 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego / pełnego

Realtek 8100C

10 / 100 Mb/s z automatyczną negocjacją szybkości

Działanie w trybie połowicznego / pełnego dupleksu


Kodek 5.1 kanałowe wy jście audio (V ER 6.X) dźwiękowy 7.1 kanałowe wy jście audio (V ER 5.X)

Obsługa Intel High-Definition Audi o dupleksu


5.1 kanałowe wy jście audio (V ER 6.X)

7.1 kanałowe wy jście audio (V ER 5.X)

Obsługa Intel High-Definition Audi o

42

Gniazda

945P-A7B

Gniazdo PCI Express x 16

Gniazdo PCI Express x 1

Gniazdo PCI

Złącze napędu dyskietek

Złącze IDE

Złącze SATA

Złącze panela przedniego

Przednie złącze audio

Złącze wejścia CD

Złącze wyjścia S/PDIF

Złącza wbudowan

Złącze główkowe wentylatora e Złącze główkowe wentylatora

945P-A7B/945PL-A7B

945PL-A7 B x1 Gniazdo PCI Express x 16 x2 Gniazdo PCI Express x 1 x3 Gniazdo PCI x1 Złącze napędu dyskietek x1 Złącze IDE x4 Złącze SATA x1 Złącze panela przedniego x1 Przednie złącze audio x1 Złącze wejścia CD x1 Złącze wyjścia S/PDIF

Złącze główkowe wentylatora

Złącze główkowe wentylatora

Złącze główkowe otwarcia obudowy (opcja) x1

Złącze główkowe otwarcia obudowy (opcja) x1

Złącze główkowe kasowani a CMOS x1 Złącze główkowe kasowani a CMOS x1

Złącze USB x2 Złącze USB x2

Złącze zasilania (24 pi nowe)

Złącze zasilania (4 pinowe) x1 Złącze zasilania (24 pi nowe) x1 Złącze zasilania (4 pinowe) x1 x1

Klawiatura PS/2

Mysz PS/2

Port szeregowy

Back Panel Port druk arki

I/O Port LAN

Port USB

Gniazdo audio (Ver 6.x)


Wymiary płyty

Obsluga systemu operacyjn ego

205 mm (S) X 305 mm (W)

Windows 2000 / XP / VISTA x1 x1 x1 x1 x1 x4 x3 x6

Biostar zastrzega sobie prawo dodawania

Klawiatura PS/2

Mysz PS/2

Port szeregowy

Port druk arki

Port LAN

Port USB



205 mm (S) X 305 mm (W)


Biostar zastrzega sobie prawo dodawania lub odwoływania obsługi dowolnego lub odwoływania obsługi dowolnego systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia. x1 x4 x3 x6 x1 x1 x1 x1 x1 x2 x3 x1 x1 x4 x1 x1 x1 x1

43


RUSSIAN

CPU

(централь ный процессор

)

945P-A7B

LGA 775

Процессор Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D до 3.8 ГГц

Поддержка технологий Hy per-Threading

Execute Disable Bit



533 / 800 / 1066 МГц FSB

Набор микросхе м

Intel 945P

Intel ICH7

Основная память

Слоты DDR2 DIMM x 4

Каждый модуль DIMM поддерж ивает

128/256/512МБ & 1ГБ DDR2

Максимальная ёмк ость памяти 4 ГБ

Модуль памяти с дву хканальным режимом DDR

Поддержка DDR2 533 / 667

ITE 8712F

Аппаратный монитор

Super I/O

IDE

SATA

Локаль на я сеть

LGA 775

Intel 945PL

Intel ICH7

945PL-A7 B

Процессор Intel Core2Duo / Pentium 4 /

Pentium D / Celeron D до 3.8 ГГц

Поддержка технологий Hy per-Threading

Execute Disable Bit



533 / 800 / 1066 МГц

Слоты DDR2 DIMM x 2

Каждый модуль DIMM поддерж ивает

128/256/512МБ & 1ГБ DDR2

Максимальная ёмк ость памяти 2 ГБ

Модуль памяти с дву хканальным режимом DDR

Поддержка DDR2 400 / 533

ITE 8712F

Аппаратный монитор

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Встроенное устройство управления встроенными интерфейсами устройств

Регулятор скорости

Функция ITE "Smart Guardian"

(Интеллектуальная защита)

Встроенное устройство управления встроенными интерфейсами устройств

Режим "хозяина" ш ины Ultra DMA 33 / 66 / Режим "хозяина" ш ины Ultra DMA 33 / 66 /

100 100

Поддержка режима PIO 0~4, Поддержка режима PIO 0~4,

Встроенное последовательное устройс тво управления ATA скорость передачи данных до 3.0 гигабит/с.

Встроенное последовательное устройс тво управления ATA скорость передачи данных до 3.0 гигабит/с.

Соответствие специф икации SATA версия Соответствие специф икации SATA версия

2.0. 2.0.

Realtek 8100C

Автоматическое согласование 10 / 100

Мб/с

Частичная / полная дуплексная способнос ть

Realtek 8100C

Автоматическое согласование 10 / 100

Мб/с

Частичная / полная дуплексная способнос ть

Звуковой кодек


5.1канальный звуковой выход (VER 6.X)


5.1канальный звуковой выход (VER 6.X)

7.1канальный звуковой выход (VER 5.X) 7.1канальный звуковой выход (VER 5.X)

Звуковая поддержка I ntel Hi gh-Defi nition Звуковая поддержка I ntel Hi gh-Defi nition

44

Слоты

945P-A7B

Слот PCI Ex press x16

Слот PCI Ex press x1

Слот PCI

Разъём IDE

Разъём SATA

945P-A7B/945PL-A7B

945PL-A7 B x1 Слот PCI Ex press x16 x2 Слот PCI Ex press x1 x3 Слот PCI x1 Разъём IDE x4 Разъём SATA x1 x2 x3 x1 x4

Разъём ввода для CD

Разъём вывода для S/PDIF

Контак тирующее приспособление вентилятора центрального

Встроенн ый разъём

Контак тирующее приспособление x1 Разъём ввода для CD x1 Разъём вывода для S/PDIF

Контак тирующее приспособление вентилятора центрального x1 x1

Контак тирующее приспособление

Шасси открытого к онтактирую щего прис пособления (дополнительно) x1

Шасси открытого к онтактирую щего прис пособления (дополнительно) x1

Открытое контак тирующее прис пособление CMOS x1

Открытое контак тирующее прис пособление CMOS x1

Клавиатура PS/2

Мышь PS/2

Задняя панель средств ввода-вы вода

Порт LAN

Гнездо для подключения наушников (Ver 6.x)


Размер панели

Поддержк а OS


Biostar сохраняет за собой право добавлять или удалять средс тва обеспечения для OS с или без предварительного у ведом ления. x1 x1 x1 Порт LAN x3 x6

Клавиатура PS/2

Мышь PS/2




Biostar сохраняет за собой право добавлять или удалять средс тва обеспечения для OS с или без предварительного у ведом ления. x1 x1 x1 x3 x6

45


ARABIC

945PL-A7 B

LGA 775

تﺎﺠﻟﺎﻌﻡIntel Core2Duo / Pe ntium 4 /

Pentium D / Celeron D ﺎﺠﻴﺝ 3.8

ﻰﻟإ ﻞﺼ ﻳ ددﺮﺘ ﺑ

ﺰﺕﺮه

تﺎﻴﻨﻘﺕ ﻢﻋﺪﺕHyper -Thr eadi ng

Execute Disable Bit



ددﺮﺕ 533 / 800 / 1066 ﺰﺕﺮه ﺎﺠﻴﻡ

Intel 945PL

Intel ICH7

945P-A7B

LGA 775

تﺎﺠﻟﺎﻌﻡIntel Core2Duo / Pe ntium 4 /

Pentium D / Celeron D ﺎﺠﻴﺝ 3.8

ﻰﻟإ ﻞﺼ ﻳ ددﺮﺘ ﺑ

ﺰﺕﺮه

تﺎﻴﻨﻘﺕ ﻢﻋﺪﺕHyper -Thr eadi ng

Execute Disable Bit



ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو

ﺔ ﻳﺰآﺮﻤﻟا

ﻲﻡﺎﻡﻷا ﻞﻗﺎﻨﻟا

ددﺮﺕ 533 / 800 / 1066 ﺰﺕﺮه ﺎﺠﻴﻡ

ﻲﺒﻥﺎﺠﻟا

Intel 945P

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻡ

Intel ICH7

4 دﺪﻋ DDR2 DIMM ﺔﺤﺘﻓ 2 دﺪﻋ DDR2 DIMM ﺔﺤﺘﻓ

ﺔﺤﺘﻓ ﻞآ ﻢﻋﺪﺕDIMM عﻮﻥ ﻦﻡ ةﺮآاذ ﻢﻋﺪﺕ DDR2 ﺔﻌﺱ

256/512 ﺖﻳﺎﺑ ﺎﺠﻴﺝ 1 و ﺖﻳﺎﺑ ﺎﺠﻴﻡ

ﺖﻳﺎﺑ ﺎﺠﻴﺝ 2 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺱ

ةﺮآاذ ةﺪﺣوDDR ةﺎﻨﻘﻟا ﺔﺝودﺰﻡ / ﺔﻳدﺎﺣأ

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺕDDR تﺎﻌﺱ 400 / 533ﺖﻳﺎﺑ ﺎﺠﻴﻡ

ITE 8712F

ةﺰﻬﺝﻷا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺱ ﻲﻓ ﺐﻗاﺮﻡ

256/512 ﺖﻳﺎﺑ ﺎﺠﻴﺝ 1 و ﺖﻳﺎﺑ ﺎﺠﻴﻡ

ﺖﻳﺎﺑ ﺎﺠﻴﺝ 4 ىﻮﺼﻗ ةﺮآاذ ﺔﻌﺱ

ﺔﻴﺴﻴﺋﺮﻟا ةﺮآاﺬﻟا

ةﺮآاذ ةﺪﺣوDDR ةﺎﻨﻘﻟا ﺔﺝودﺰﻡ / ﺔﻳدﺎﺣأ

عﻮﻥ ﻦﻡ ةﺮآاﺬﻟا ﻢﻋﺪﺕDDR تﺎﻌﺱ 533 / 667ﺖﻳﺎﺑ ﺎﺠﻴﻡ

ITE 8712F

ةﺰﻬﺝﻷا ﺔﻟﺎﺣ ﺔﻓﺮﻌﻤﻟ ﺐﻗاﺮﻡ

ﺔﺣوﺮﻤﻟا ﺔﻋﺮﺱ ﻲﻓ ﺐﻗاﺮﻡ

ﺔﻔﻴﻇو"Smart Guar dian" ﻦﻡ ITE

Super I/O

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﺔﻴﻨﻘﺘﺑ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100

ﻲﺴﻴﺋر ﻊﺿو

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

.

ﺔﻴﻥﺎﺛ / ﺖﺑﺎﺠﻴﺝ 3.0

ﻰﻟإ ﻞﺼﺕ تﺎﻋﺮﺴﺑ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺑﺎﻄﻡSATA راﺪﺹﻹا 2.0.

Realtek 8100C

ﺔﻴﻥﺎﺛ / ﺖﻳﺎﺑ ﺎﺠﻴﻡ 100 / 10 ﻲﺋﺎﻘﻠﺕ ضوﺎﻔﺕ

ﻲﻔﺼﻨﻟا / ﻞﻡﺎﻜﻟا جودﺰﻤﻟا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻡإ

ﻢﻜﺤﺘﻡIDEﻞﻡﺎﻜﺘﻡ

ﺔﻴﻨﻘﺘﺑ ﻞﻗﺎﻥUltra DMA 33 / 66 / 100

ﻲﺴﻴﺋر ﻊﺿو

ﻊﺿو ﻢﻋدPIO Mode 0~4

ﻢﻜﺤﺘﻡSerial ATAﻞﻡﺎﻜﺘﻡ

.

ﺔﻴﻥﺎﺛ / ﺖﺑﺎﺠﻴﺝ 3.0

ﻰﻟإ ﻞﺼﺕ ت ﺎﻋﺮﺴﺑ تﺎﻥﺎﻴﺒﻟا ﻞﻘﻥ

تﺎﻔﺹاﻮﻤﻟ ﺔﻘﺑﺎﻄﻡSATA راﺪﺹﻹا 2.0.

Realtek 8100C

ﺔﻴﻥﺎﺛ / ﺖﻳﺎﺑ ﺎﺠﻴﻡ 100 / 10 ﻲﺋﺎﻘﻠﺕ ضوﺎﻔﺕ

ﻲﻔﺼﻨﻟا / ﻞﻡﺎﻜﻟا جودﺰﻤﻟ ا ﻞﻘﻨﻟا ﺔﻴﻥﺎﻜﻡإ

IDE ﺬﻔﻨﻡ

SATA

ﺔﻴﻠﺧاد ﺔﻜﺒﺵ

100 / 10

46

1

2

3

945PL-A7 B


5.1تﻮﺼﻟا جﺮﺨﻟ تاﻮﻨﻗ (VER 6.X)


دﺪﻋ

دﺪﻋ

دﺪﻋ

ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕIntel

PCI Express x16 ﺔﺤﺘﻓ


PCI ﺔﺤﺘﻓ

1 دﺪﻋ

2 دﺪﻋ

3 دﺪﻋ

945P-A7B/945PL-A7B

945P-A7B




ﻦﻡ ﻒﻳﺮﻌﺘﻟا ﻲﻟﺎﻋ تﻮﺼﻟا ﺔﻴﻨﻘﺕ ﻢﻋﺪﺕIntel



PCI ﺔﺤﺘﻓ

ت ﻮﺼﻟا ﻚﻳدﻮآ

تﺎﺤﺘﻔﻟا

1 دﺪﻋ

1 دﺪﻋ

2 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

4 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

1 دﺪﻋ

4 دﺪﻋ

3 دﺪﻋ

6 دﺪﻋ

ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ

IDE ﺬﻔﻨﻡ

SATA ﺬﻔﻨﻡ

ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ

CD-IN ﺬﻔﻨﻡ

S/PDIF جﺮﺧ ﺬﻔﻨﻡ

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو

( يرﺎﻴﺘﺧا ) ﻞﻜﻴﻬﻟا ﺢﺘﻓ ﺔﻠﺹو

CMOS ﺢﺴﻡ ﺔﻠﺹو

USB ﺬﻔﻨﻡ

( سﻮﺑد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ

( ﺲ ﻴﺑﺎﺑد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ

PS/2 ﺢﻴﺕﺎﻔﻡ ﺔﺣﻮﻟ

PS/2 سوﺎﻡ

ﻲﻠ ﺴﻠﺴﺕ ﺬﻔﻨﻡ

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻡ

ﺔﻴﻠﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ

USB ﺬﻓﺎﻨﻡ

(Ver 6.x) تﻮﺹ ﺲﺒﻘﻡ


( عﺎﻔﺕرا ) ﻢﻡ 305 X ( ضﺮﻋ ) ﻢﻡ 205


1

1

4

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

4

3

6

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

دﺪﻋ

ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ

IDE ﺬﻔﻨﻡ

SATA ﺬﻔﻨﻡ

ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ

ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ

CD-IN ﺬﻔﻨﻡ

S/PDIF جﺮﺧ ﺬﻔﻨﻡ

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺔﺣوﺮﻡ ﺔﻠﺹو

مﺎﻈﻨﻟا ﺔﺣوﺮﻡ ﺔﻠﺹو

( يرﺎﻴﺘﺧا ) ﻞﻜﻴ ﻬﻟا ﺢﺘﻓ ﺔﻠﺹو

CMOS ﺢﺴﻡ ﺔﻠﺹو

USB ﺬﻔﻨﻡ

( سﻮﺑد 24 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ

ﺢﻄﺱ ﻰﻠﻋ ﺬﻓﺎﻨﻤﻟا

ﺔ ﺣﻮﻠﻟا

( ﺲﻴﺑﺎﺑد 4 ) ﺔﻗﺎﻄﻟا ﻞﻴﺹﻮﺕ ﺬﻔﻨﻡ

PS/2 ﺢﻴﺕﺎﻔﻡ ﺔﺣﻮﻟ

PS/2 سوﺎﻡ

ﻲﻠﺴﻠﺴﺕ ﺬﻔﻨﻡ

ﺔﻌﺑﺎﻃ ﺬﻔﻨﻡ

ﺔﻴﻠﺤﻡ لﺎﺼﺕا ﺔﻜﺒﺵ ﺬﻔﻨﻡ

USB ﺬﻓﺎﻨﻡ



( عﺎﻔﺕرا ) ﻢﻡ 305 X ( ضﺮﻋ ) ﻢﻡ 205


جﺮﺧ / ﻞﺧد ﺬﻓﺎﻨﻡ

ﺔﻴﻔﻠﺨ ﻟا ﺔﺣﻮﻠﻟا

ﺔﺣﻮﻠﻟا ﻢﺠﺣ

ﻆﻔﺘﺤﺕBiostar ﻞﻴﻐﺸﺕ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎﻬﻘﺤﺑ

.

رﺎﻄﺧإ نوﺪﺑ وأ رﺎﻄﺧﺈﺑ

ﻆﻔﺘﺤﺕBiostar ﻞﻴﻐﺸﺕ مﺎﻈﻥ يﻷ ﻢﻋﺪﻟا ﺔﻟازإ وأ ﺔﻓﺎﺿإ ﻲﻓ ﺎ ﻬﻘﺤﺑ ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻥأ ﻢﻋد

.

رﺎﻄﺧإ نوﺪﺑ وأ رﺎﻄﺧﺈﺑ

47


JAPANESE

945P-A7B

LGA 775


CPU


Hyper -Threading

Execute Disable Bit



533 / 800 / 1066 MHz FSB

チップセッ Intel 945P

ト Intel ICH7

DDR2 DIMMスロット x 4

メインメモ

各 DIMMは 256/512MB & 1GB DDRをサポー

ト

最大メモリ容量

4GB

リ

デュアル

チャンネルモードDDRメモリモジュ

ール

DDR2 533 / 667 をサポート

ITE 8712F

Super I/O

H/Wモニター

ファン速度コントローラ / モニター

ITEの「スマートガーディアン」機能

IDE

SATA

統合 IDEコントローラ

Ultra DMA 33 / 66 / 100バスマスタモード

PIO Mode 0~4のサポート

統合シリアル ATAコントローラ

最高 3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

10/100

LAN

サウンド

Codec

945PL-A7 B

LGA 775



Hyper -Threading

Execute Disable Bit



533 / 800 / 1066 MHz

Intel 945PL

Intel ICH7

DDR2 DIMMスロット x 2

各 DIMMは 256/512MB & 1GB DDRをサポー

ト

最大メモリ容量

2GB

デュアル

チャンネルモードDDRメモリモジュ

ール

DDR2 400 / 533 をサポート

ITE 8712F

H/Wモニター

ファン速度コントローラ / モニター

ITEの「スマートガーディアン」機能

統合 IDEコントローラ

Ultra DMA 33 / 66 / 100バスマスタモード

PIO Mode 0~4のサポート

統合シリアル ATAコントローラ

最高 3.0 Gb/秒のデータ転送速度

SATAバージョン2.0仕様に準拠。

Realtek 8100C

10 / 100 Mb/sオートネゴシエーション

半

/全二重機能

Realtek 8100C

10 / 100 Mb/sオートネゴシエーション

半

/全二重機能


5.1チャンネルオーディオアウト(VER 6.X)


5.1チャンネルオーディオアウト(VER 6.X)

7.1チャンネルオーディオアウト(VER 5.X) 7.1チャンネルオーディオアウト(VER 5.X)

Intelハイデフィニションオーディオのサポート Intelハイデフィニションオーディオのサポート

48

スロット

945P-A7B

PCI Expr ess x16スロット

PCI Expr ess x16スロット

945P-A7B/945PL-A7B

945PL-A7 B x1 PCI Expr ess x16スロット x1 x2 PCI Expr ess x16スロット x2

フロッピーコネクタ x1 x1

フロントパネルコネクタ

x1 x1

フロントオーディオコネクタ

x1 x1

オンボード

コネクタ

システムファンヘッダ

x1 x1

シャーシオープンヘッダ (オプション) x1 シャーシオープンヘッダ(オプション) x1

電源コネクタ

(24ピン)

電源コネクタ (4ピン)

PS/2キーボード x1 x1

電源コネクタ

(24ピン) x1 電源コネクタ (4ピン)

PS/2キーボード x1 x1 x1

PS/2マウス x1 PS/2マウス x1

シリアルポート x1

背面パネルプリンタポート

x1

I/O

オーディオジャック (Ver 6.x)

オーディオジャック

(Ver 5.x) x3 x6

オーディオジャック (Ver 6.x)

オーディオジャック

(Ver 5.x) x3 x6

ボードサイ

205 mm (幅) X 305 mm (高さ)

ズ


OSサポー

ト

Biostarは事前のサポートなしにOSサポートを

追加または削除する権利を留保します。

205 mm (幅) X 305 mm (高さ)


Biostarは事前のサポートなしにOSサポートを

追加または削除する権利を留保します。

2006/11/16

49

945P-A7B/945PL-A7B BIOS Manual

BIOS Setup............................................................................... 1

1 Main Menu .................................................................................. 3

2 Standard CMOS Features.............................................................. 6

3 Advanced BIOS Features ............................................................... 8

4 Advanced Chipset Features ...........................................................15

5 Integrated Peripherals ..................................................................18

6 Power Management Setup.............................................................25

7 PnP/PCI Configurations ...............................................................31

8 PC Health Status..........................................................................33

9 Frequency Control .......................................................................35

1


BIOS Setup

Introduction

This manual discussed Award™ Setup program built into the ROM BIOS. The Setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed RAM so that it retains the Setup information when the power is turned off.

The Award BIOS™ installed in your computer system’s ROM (Read Only Memory) is a

® custom version of an industry standard BIOS. This means that it supports Intel Pentium 4 processor input/output system. The BIOS provides critical low-level support for standard devices such as disk drives and serial and parallel ports.

Adding important has customized the Award BIOS™ , but nonstandard, features such as virus and password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system.

The rest of this manual is intended to guide you through the process of configuring your system using Setup.

Plug and Play Support

These AWARD BIOS supports the Plug and Play Version 1.0A specification. ESCD

(Extended System Configuration Data) write is supported.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green PC specification.

APM Support

These AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management

(APM) specification. Power management features are implemented via the System

Management Interrupt (SMI). Sleep and Suspend power management modes are supported.

Power to the hard disk drives and video monitors can be managed by this AWARD BIOS.

ACPI Support

Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface specification (ACPI). It provides ASL code for power management and device configuration capabilities as defined in the ACPI specification, developed by Microsoft,

Intel and Toshiba.

1


PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component

Interconnect) local bus specification.

DRAM Support

DDR SDRAM (Double Data Rate Synchronous DRAM) are supported.

Supported CPUs

This AWARD BIOS supports the Intel CPU.

Using Setup

In general, you use the arrow keys to highlight items, press <Enter> to select, use the

<PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit.

The following table provides more detail about how to navigate in the Setup program by using the keyboard.

Keystroke Function

Up arrow

Down arrow

Left arrow

Right arrow

Move Enter

PgUp key

PgDn key

+ Key

- Key

Esc key

F1 key

F5 key

F7 key

F10 key

Move to previous item

Move to next item

Move to the item on the left (menu bar)

Move to the item on the right (menu bar)

Move to the item you desired

Increas e the numeric val ue or make c hanges

Decrease the numeric value or make changes

Increas e the numeric val ue or make c hanges

Decrease the numeric value or make changes

Main Menu – Quit and not s ave c hanges into CMOS

Status Page Setup Menu and Option Page Setup Menu – Exit

Current page and r eturn to M ain Menu

General help on Setup navigation keys

Load pr evious values from CMOS

Load the opti mized defaults

Save all the CMOS c hanges and exit

2


1 Main Menu

Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.

!! WARNING !!

For better system performance, the BIOS firmware is being continuously updated. The BIOS information described in this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference only.

The actual BIOS information and settings on board may be slightly different fro m this manual.

 Figure 1. Main Menu

Standard CMOS Features

This submenu contains industry standard configurable options.

Advanced BIOS Features

This submenu allows you to configure enhanced features of the BIOS.

3


Advanced Chipset Features

This submenu allows you to configure special chipset features.

Integrated Peripherals

This submenu allows you to configure certain IDE hard drive options and Programmed

Input/ Output features.

Power Management Setup

This submenu allows you to configure the power management features.

PnP/PCI Configurations

This submenu allows you to configure certain “ Plug and Play” and PCI options.

PC Health Status

This submenu allows you to monitor the hardware of your system.

Frequency/ Voltage Control

This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock. (However, this f unction is strongly recommended not to use. Not properly change the voltage

and clock may cause the CPU or M/B damage! )

Load Optimized Defaults

This selection allows you to reload the BIOS when the system is having problems particularly with the boot sequence. These configurations are factory settings optimized for this system. A confirmation message will be displayed before defaults are set.

Set Supervisor Password

Setting the supervisor password will prohibit everyone except the supervisor from making changes using the CMOS Setup Utility.You will be prompted with to enter a password.

4


Set User Password

If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. I f the Supervisor Password is set and the User Password is set, the “ User” will only be able to view configurations but will not be able to change them.

Save & Exit Setup

Save all configuration changes to CMOS(memory) and exit setup. Confirmation message will be displayed before proceeding.

Exit Without Saving

Abandon all changes made during the current session and exit setup. confirmation message will be displayed before proceeding.

Upgrade BIOS

This submenu allows you to upgrade bios.

5


2 Standard CMOS Features

The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the<PgUp> or <PgDn> keys to select the value you want in each item.

Figure 2. Standard CMOS Setup

Main Menu Selections

This table shows the selections that you can make on the Main Menu.

Date

Time mm : dd : yy hh : mm : ss

IDE Channel 0 Master Options are in its sub menu.

Set the system date. Note that the ‘Day ’ automatically changes when you set the date.

Set the system internal clock.

Press <Enter> to enter the sub menu of detailed options

6


IDE Channel 0 Slav e Options are in its sub menu.

IDE Channel 1 Master Options are in its sub menu.

IDE Channel 1 Slav e Options are in its sub menu.

Driv e A

Driv e B

Press <Enter> to enter the sub menu of detailed options.



Select the ty pe of f loppy disk drive installed in your sy stem.

Halt On

Base Memory

360K, 5.25 in

1.2M, 5.25 in

720K, 3.5 in

1.44M, 3.5 in

2.88M, 3.5 in

None

All Errors

No Errors

All, but Key board

All, but Diskette

All, but Disk/ Key

N/A

Select the situation in which y ou want the BIOS to stop the POST process and notify y ou.

Extended Memory

Total Memory

N/A

N/A

Displays the amount of conv entional memory detected during boot up.

Displays the amount of extended memory detected during boot up.

Displays the total memory av ailable in the system.

7


3 Advanced BIOS Features

 Figure 3. Advanced BIOS Setup

8


CPU FEATURE

Delay Prior to Thermal

Set this item to enable the CPU Thermal function to engage after the specified time.

The Choices: 4Min, 8Min, 16Min (default), 32Min.

Thermal Management

Allow you to choose the thermal management method of your monitor.

The Choices: Thermal Monitor 1 (default), Thermal Monitor2.

Notes: The choices will be diff erent according to your CPU f eatures.

TM2 B us Ratio

Represents the frequency. Bus ratio of the throttled performance state that will be initiated when the on-die sensor goes from not hot to hot.

Min= 0, Max= 255, Key in a DEC number.

The Choices: 0X (default).

TM2 Bus VID

Represents the voltage of the throttled performance state that will be initiated when the on-die sensor goes from not hot to hot.

The Choices: 0.8375V (default), Min=0.8375V, Max=1.6000.

Limit CPU ID MaxVal

Set limit CPU ID maxi mum vale to 3, it should be disabled for Win XP.

The Choices: Disabled (default), Enabled.

9


C1E Function

CPU C1E Function select.

The Choices: Auto (default),Disabled

Execute Disable Bit

When disabled, forces the XD feature flag to always return 0.

The Choices: Enabled (default), Disabled.

Virtualization Technology

When enabled, a VMM can utilize the additional hardware

Capabilities provided by vanderpool Technology.

The Choices: Enabled (default), Disabled

CACHE SETUP

CPU L3 Cache

Depending on the CPU/chipset in use, you may be able to increase memory access time with this option.

Enabled (default) Enable cache.

10


BOOT SEQ & FLOPPY SETUP

Hard Disk Boot Priority

These BIOS attempt to load the operating system fro m the device in the sequence selected in these items.

The Choices: Pri. Master, Pri.Slave, Sec.Master, Sec. Slave, USBHDD0,

USBHDD1, USBHDD2 and Bootable Add-in Card.

11


First/Second/Third Boot Device

These BIOS attempt to load the operating system fro m the device in the sequence selected in these items.

The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,

USB-CDROM, LAN, Disabled.

Boot Other Device

When enabled, BIOS will try to load the operating system fro m other device when it failed to load from the three devices above.


Swap Floppy Drive

For systems with two floppy drives, this option allows you to swap logical drive assignments.


Boot Up Floppy Seek

Enabling this option will test the floppy drives to determine if they have 40 or 80 tracks.

Disabling this option reduces the time it takes to boot-up.

The Choices: Disabled, Enabled (default).

Report NO FDD for Win95

This item allows you to select YES/NO to Report NO FDD for Win95.

The Choices: NO (default), YES.

VIRUS WARNING

This option allows you to choose the Virus Warning feature that is used to protect the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep.

Disabled (default)

Enabled

Virus protection is disabled.

Virus protection is activated.

HYPER-THREADING TECHNOLOGY

This option allows you to enable or disabled CPU Hyper-Threading.

Enabled for Windows XP and Linux 2.4.x (OS optimized for Hyper Threading

Technology. Disabled for other OS (OS not optimized for Hyper Threading Technology.


Q UICK POWER ON SELF TEST

Enabling this option will cause an abridged version of the Power On

Self-Test (POST) to execute after you power up the computer.

Disabled Normal

Enabled (default) Enable

12


BOOT UP NUMLOCK STATUS

Selects the NumLock. State after power on.

On (default) Numpad is number keys.

Off

GATE A20 OPTION

Numpad is arrow keys.

Select if chipset or keyboard controller should control Gate A20.

Normal A pin in the keyboard controller controls GateA20.

Fast (default) Lets chipset control Gate A20.

TYPEMATIC RATE SETTING

When a key is held down, the keystroke will repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be configured.


TYPEMATIC RATE (CHARS/SEC)

Sets the rate at which a keystroke is repeated when you hold the keydown.

The Choices: 6 (default), 8,10,12,15,20,24,30

TYPEMATIC DELAY (MSEC)

Sets the delay time a fter the key is held down before it begins to repeat the keystroke.

The Choices: 250 (default), 500, 750, and 1000.

SECURITY OPTION

This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility.

System A password is required for the system to boot and

is also required to access the Setup Utility.

Setup (default) A password is required to access the Setup Utility only.

This will only apply if passwords are set from the Setup main menu.

APIC MODE

Selecting Enabled enables APIC device mode reporting from the BIOS to the operating system.


MPS VERSION CONTROL FOR OS

The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.

Select version supported by the operation system running on this computer.

The Choices: 1.4 (default), 1.1.

OS SELECT FOR DRAM > 64MB

A choice other than Non-OS2 is only used for OS2 systems with memory exceeding

64MB.

The Choices: Non-OS2 (default), OS2.

13


SMALL LOGO (EPA) SHOW

This item allows you to select whether the “ Small Logo” shows.

Enabled (default) “ Small Logo” shows when system boot up.

Disabled No “ Small Logo” shows when system boots up.

SUMMARY SCREEN SHOW

This item allows you to enable/disable the summary screen. Summary

screen means system configuration and PCI device listing.

The choices: Enabled, Disabled (default).

14


4 Advanced Chipset Features

This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system me mory resources, such as

DRAM. It also coordinates communications with the PCI bus. The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly.

 Figure 4. Advanced Chipset Setup

DRAM TIMING SELECTABLE

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing.

The Choices: B y SPD (de fault), Manual.

CAS LATENCY TIME

When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing.

The Choices: Auto (default),3,4,5,6.

DRAM RAS# TO CAS# DELAY

This field let you insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or re freshed. Fast gives faster performance; and slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system.

The Choices: Auto (default),2,3,4,5,6.

15


DRAM RAS# PRECHARGE

If an insufficient number of cycles is allowed for RAS to accumulate its charge before

DRAM refresh, the refresh may be incomplete, and the DRAM may fail to retain data.

Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system.

The Choices: Auto (default), 2,3,4,5,6.

PRECHARGE DELAY (TRAS)

This item controls the number of DRAM clocks to activate the precharge delay.

The Choices: Auto (default),4/5/6/7/8/9/10/11/12/13/14/15.

SYSTEM MEMORY FREQ UENCY

This item allows you to select the Memory Frequency.

The Choices: Auto (default), 400Mhz,533Mhz,667Mhz.

SLP S4# ASSERTION WIDTH

This item sets the minimum assertion width of the SLP-S4# signal to guarantee the

DRAM has been safely power-cycled.

The Choices: 4 to 5 Sec (default), 3 to 4 Sec, 2 to 3 Sec ,1 to 2Sec.

SYSTEM BIOS CACHEABLE

Selecting Enabled allows you caching of the system BIOS ROM at F0000h~FFFFFh, resulting a better system performance. However, if any program writes to this memory area, a system error may result.


VIDEO BIOS CACHEABLE

Select Enabled allows caching of the video BIOS, resulting a better system performance.

However, if any program writes to this memory area, a system error may result.


MEMORY HOLE AT 15M-16M

You can reserve this area of system me mory for ISA adapter ROM. When this area is reserved it cannot be cached. The user information of peripherals that need to use this area of system me mory usually2 discussed their memory requirements.


16


PCI EXPRESS ROOT PORT FUNC

PCI Express Port 1/ 2/3

This item allows you to select the PCI Express Port.

The Choices: Auto (default), Enabled, Disabled.

PCI -E Compliancy Mode

This item allows you to select the PCI-E Compliancy Mode.

The Choices: v1.0a (default), v1.0.

17


5 Integrated Peripherals

 Figure 5. Integrated Peripherals

18


ONCHIP IDE DEVICE

IDE HDD B lock Mode

Block mode is also called block transfer, multiple commands, or multiple sector read / write. If your IDE hard drive supports block mode (most new drives do), select

Enabled for automatic detection of the optimal number of block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read

/ write per sector where the drive can support.


IDE DMA Transf er Access

This item allows you to enable or disable the IDE transfer access.


On-chip Primary PCI IDE

This item allows you to enable or disable the primary/ secondary IDE Channel.


IDE Primary/Secondary Master/Slave PIO

The IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for each of the IDE devices that the onboard IDE interface supports. Modes 0 to 4 will increase performance progressively. In Auto mode, the system automatically determines the best mode for each device.

The Choices: Auto (default), Mode0, Mode1, Mode2, Mode3, and

Mode4.

19


On-chip Secondary PCI IDE

This item allows you to enable or disable the primary/ secondary IDE Channel.


IDE Primary/Secondary Master/Slave UDMA

Ultra DMA/100 functionality can be implemented if it is supported by the IDE hard drives in your system. As well, your operating environment requires a DMA driver

(Windows 95 OSR2 or a third party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/100, select Auto to enable BIOS support.

The Choices: Auto (default), Disabled.

SATA Mode

T his item allows you to choose SATA Mode.

The Choices: IDE (default),RAID,AHCI.

On-Chip Serial ATA

This item allows you to set the onboard SATA controller.

The Choices: Enhanced Mode (default), Auto, Combined Mode, Disabled,

SATA only.

SATA PORT Speed Settings

This item allows you to set SATA PORT Speed.

The Choices: Disabled (default),Force GEN I, Force GEN II.

PATA IDE Mode

This item allows you to choose PATA IDE Mode.

The Choices: Primary (default), Secondary.

20


ON BOARD DEVICE

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals.


USB 2.0 Controller

This entry is to enabled/ disabled EHCI controller only. This BIOS itself may/ may not have high speed USB support. If the BIOS has high speed USB support built in, the support will automatically turn on, when high speed device were attached.


USB Keyboard Support

This item allows you to enable or disable the USB Keyboard Legacy Support.

Enabled Enable USB Keyboard Support.

Disabled (default) Disable USB Keyboard Support.

USB Mouse Support

This item allows you to enable or disable the USB Mouse Legacy Support.

Enabled Enable USB Mouse Support.

Disabled (default) Disable USB Mouse Support.

Onboard AC97 Audio

This item allows you to enable or disable to support

The Choices: Auto (default), Disabled.

Onboard AC97 Audio.

21


Onboard RAID <ITE8211>

This item allows you to enable or disable to support Onboard RAID (ITE8211).


Onboard RAID BIOS

This item allows you to enable or disable to Onboard RAID BIOS.


Onboard 1394

This item allows you to enable or disable to support Onboard 1394 contrller.


Onboard LAN

This item allows you to enable or disable the Onboard LAN.


Onboard LAN Boot ROM

Decide whether to invoke the boot ROM of the onboard LAN chip.


22


SUPER IO DEVICE

If you highlight the literal “ Press Enter” next to the “ Super IO Device ” label and then press the enter key, it will take you a submenu with the following options:

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If install and FDC or the system has no floppy drive, select Disabled in this field.


Onboard Serial Port 1

Select an address and corresponding interrupt for the first and second serial ports.

The Choices: Disabled, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto.

Onboard Parallel Port

This item allows you to determine access onboard parallel port controller with which

I/O Address.

The Choices: 378/IRQ 7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

The default value is SPP.

The Choices:

SPP (de fault) Using Parallel port as Standard Printer Port.

EPP

ECP+EPP

ECP

Using Parallel Port as Enhanced Parallel Port.

Using Parallel port as ECP & EPP mode.

Using Parallel port as Extended Capabilities Port.

23


ECP Mode Use DMA

Select a DMA Channel for the port.

The Choices: 3 (default), 1.

POWER After PWR-Fail

This setting specifies whether your system will reboot after a power fail or interrupts occurs.

Off Leaves the computer in the power off state.

On Reboots computer.

Former-Sts Restores the system to the status before power failure or

interrupt occurs.

The Choices: Off (default), On, Former-Sts.

24


6 Power Management Setup

The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features.

Figure 6. Power Management Setup

25


ACPI & WAKE UP EVENTS

ACPI Function

This item displays the status of the Advanced Configuration and Power Management

(ACPI).


ACPI Suspend Type

The item allows you to select the suspend type under the ACPI operating system.

The Choices: S1 (POS) (default)

(STR)

Power on Suspend

RAM

POS+STR

Run VG ABIOS if S3 Resume

Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card when system wakes up from S3 state. The system time is shortened if you disable the function, but system will need AGP driver to initialize the card. So, if the AGP driver of the VGA card does not support the initialization feature, the display may work abnormally or not function after S3.

The Choices: Auto (default), Yes, No.

26


Wake-Up by PCI card

When you select “ Enable”, a PME signal from PCI card returns the system to Full On state.

The Choices: Enabled, Disabled (default).

Power On by Ring

An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state.


USB KB/MS Wake-Up From S3

This item allows you to enable or disabled USB keyboard wake up from S3.


Resume by Alarm

This function is for setting date and time for your computer to boot up.

During Disabled, you cannot use this function. During Enabled,

Choose the Date and Time.


Date (of Month) Alarm

You can choose which month the system will boot up.

Time (hh:mm:ss) Alarm

You can choose shat hour, minute and second the system will boot up.

Note: If you have change the setting, you must let the system boot up until it goes to the operating system, bef ore this f unction will work.

POWER ON Function

This item allows you to choose the power on function.

The Choices: B utton Only (default), Password, Hot Key, Mouse Move/Click,

Mouse Double Click, Any Key, Keyboard 98.

KB POWER ON Password

Input password and press Enter to set the Keyboard power on password.

Hot Key Power ON

Input password and press Enter to set the Keyboard power on password.

The Choices: Ctrl-F1 (default), Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5,

Ctrl-F6, Ctrl-F7, Ctrl-F8, Ctrl-F9, Ctrl-F10, Ctrl-F11, and Ctrl-F12.

27


RELOAD TIMER EVENTS

Primary/Secondary IDE 0/1

You can select to enable or disable Primary or Secondary RAID 0 or

RAID 1 function under this item.


FDD, COM, LPT Port

You can select to enable or disable FDD, COM, and LPT port under this item.


PCI PIRQ [A-D]#

You can select to enable or disable PCI PIRQ [A-D]# under this item.


28


POWER MANAG EMENT

This category allows you to select the type (or degree) of power saving and is directly related to the following modes:

1. HDD Power Down.

2. Suspend Mode.

There are four options of Power Management, three of which have fixed mode settings

Min Saving (default)

Minimum power management.

Suspend Mode = 1 hr.

HDD Power Down = 15 min

Max Saving

Maximu m power management only available for sl CPU’ s.

Suspend Mode = 1 min.

HDD Power Down = 1 min.

User Define

Allow you to set each mode individually.

When not disabled, each of the ranges is from 1 min. to 1 hr. except for HDD

Power Down which ranges from 1 min. to 15 min. and disable.

VIDEO OFF METHEOD

This option determines the manner in which the monitor is goes blank.

V/H SYNC+Blank

This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer .

DPMS( default)

Initial display power management signaling.

VIDEO OFF IN SUSPEND

This determines the manner in which the monitor is blanked.

The Choices: Yes (default), No.

SUSPEND TYPE

Select the Suspend Type.

The Choices: Stop G rant (default), PwrOn Suspend.

29


MODEM USE IRQ

This determines the IRQ, which can be applied in MODEM use.

The Choices: 3 (default), 4 / 5 / 7 / 9 / 10 / 11 / NA.

SUSPEND MODE

The item allows you to select the suspend type under ACPI operating system.

The Choices: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40

Min, 1 Hour (default).

HDD POWER DOWN

When enabled, the hard disk drive will power down and after a set time of system inactivity. All other devices remain active.

The Choices: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min,

10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15Min (default).

SOFT-OFF BY PWR-BTN

Pressing the power button for more than 4 seconds forces the system to enter the

Soft-Off state when the system has “ hung.”

The Choices: Delay 4 Sec, Instant-Off (default).

INTRUDER# DETECTION

This item allows you to enable or disable intruder# detection.


30


7 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or Personal Computer

Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

 Figure 7. PnP/PCI Configurations

INIT DISPLAY FIRST

This item allows you to decide to active whether PCI Slot or on-chip VGA first.

The Choices: PCI Slot (default), PCIEx.

RESOURCES CONTROLLED BY

By Choosing “ Auto (ESCD)” (default), the system BIOS will detect the system resources and automatically assign the relative IRQ and DMA channel for each peripheral. By Choosing “ Manual”, the user will need to assign IRQ & DMA for add-on cards. Be sure that there are no IRQ/DMA and I/O port conflicts.

The Choices: Auto (default),Manual.

31


IRQ RESOURCES

This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. When you press the “ Press Enter” tag, you will be directed to a submenu that will allow you to configure the system interrupts. This is only configurable when “ Resources Controlled By” is set to “ Manual”.

IRQ-3 assigned to PCI Device










PCI / VGA PALETTE SNOOP

Choose Disabled or Enabled. Some graphic controllers that are not VGA compatible take the output from a VGA controller and map it to their display as a way to provide boot information and VGA compatibility. However, the color information coming from the

VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller. To do this, the non-VGA graphic controller watch for the Write access to the

VGA palette and registers the snoop data. In PCI based systems, where the VGA controller is on the PCI bus and a non-VGA graphic controller is on an ISA bus, the

Write Access to the palette will not show up on the ISA bus if the PCI VGA controller responds to the Write.

In this case, the PCI VGA controller should not respond to the Write, it should only snoop the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic controller can then snoop the data on the ISA bus. Unless you have the above situation, you should disable this option.

Disabled (default) disable the function.

Enabled enable the function.

MAXIMUM PAYLOAD SIZE

Set the maximu m TLP payload size for the PCI Express device.The unit is byte.

The Choice: 4096 (default), 128, 256, 512, 1024, 2048.

32


8 PC Health Status

 Figure 8. PC Health Status

CPU FAN Control

The Choice “ smart” can make your CPU FAN to reduce noise.

The Choices: Smart (default), Always On.

CPU Fan Off<℃>

If the CPU Temperature is lower than the set value, FAN will turn off.

The Choices: Min=0,.Max=127, Key in a DEC number.

CPU Fan Start<℃>

CPU fan starts to work under smart fan function when arrive this set value.


CPU Fan Full speed <℃>

When CPU temperature is reach the set value, the CPU fan will work under Full Speed.


Start PWM Value

When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan

Function mode. The range is from 0~127, with an interval of 1.


33


Slope PWM

Increasing the value of slope PWM will raise the speed of CPU fan.

The Choices: 1 PWM Value/℃ (default), 2 PWM Value/℃, 4 PWM Value/℃, 8 PWM

Value/℃,16 PWM Value/℃.

SHUTDOWN TEMPERATURE

This item allows you to set up the CPU shutdown Temperature. This item only effective under Windows 98 ACPI mode

The Choices: 65 O C/140 O F, 70 O C/149 O F, 75 O C/158 O F, Disabled (default).

SHOW H/W MONITOR IN POST

If you computer contain a monitoring system, it will show PC health status during POST stage. The item offers several delay time to select you want.


CPU VCORE,NB/SB VOLTAGE, +3.3V,+5.0V, DDR VOLTAGE,

5V(SB),VOLTAGE BATTERY

Detect the system’s voltage status automatically.

CURRENT CPU TEMP

This field displays the current temperature of CPU.

CURRENT CPU FAN SPEED

This field displays the current speed of CPU fan.

CURRENT SYS FAN SPEED

This field displays the current speed SYSTEM fan.

34


9 Frequency Control

 Figure 9. Frequency Control

CPU Voltage

This item allows you to select CPU Voltage Control.

The Choices: StartUp (default), +0.012V~+0.787V.

Memory Voltage

The Choices:1.90V (default), 2.00V, 2.10V, 2.20V, 2.30V, 2.40V, 2.50V, 2.60V..

NB/SB Voltage

The Choices: 1.5V (default), 1.6V, 1.7V, 1.8V.

FSB Termination Voltage

The Choices: 1. 2V (default), 1.3V, 1.4V, 1.5V.

CPU CLOCK RATIO

This item allows you to select the CPU Ratio.

Min= 8, Max= 50,Key in a DEC number.

The Choices: 8X (default).

35


CPU CLOCK

This item allows you to select CPU Clock, and CPU over clocking.

Min= 100, Max= 265,Key in a DEC number.

The Choices: 100MHZ (default).

Special Notice:

If unfortunately, the system’ s frequency that you are selected is not functioning, there are two methods of booting-up the system.

Method 1:

Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ ON” status. All the

CMOS data will be loaded as defaults setting.

Method 2:

Press the <Insert> key and Power button simultaneously, after that keep-on pressing the

<Insert> key until the power-on screen showed. This action will boot-up the system according to FSB of the processor.

PCIE Clock select

The Choices: Upto CPU(default), Fixed 100, Manual

PCIE Clock

This item will activated only when “ PCIE Clock Select” is set to “ Manual”

The Choices: Min= 100, Max= 200, Key in a DEC number.

PCI Clock

The Choices: 33.33Mhz(default), 33.80Mhz, 34.29Mhz, 34.78Mhz, 35.29Mhz,

35.82Mhz, 36.36Mhz, 36.92Mhz, 37.50Mhz.

It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU

Vcore and clock are not in def ault setting, it may cause CPU or M/B damage.

36

Biostar 945P A7B, 945PL A7B Motherboard Setup Manual

Assistant Bot

FCC Information and Copyright

EFORE

OU

TART

ACKAGE

HECKLIST

OTHERBOARD

EATURES

EAR

ANEL

ONNECTORS

ER

X

EAR

ANEL

ONNECTORS

ER

X

OTHERBOARD

AYOUT

FOR

ER

X

OTHERBOARD

AYOUT

FOR

ER

X

NSTALLING

ENTRAL

ROCESSING

NIT

Special Notice:

EADERS

JC FAN1: C PU Fan Heade r

JSFAN1: System Fan He ader

NSTALLING

YSTEM

EMORY

A. Memory Modules

B. Memory Capacity

C. Dual Channel Memory installation

ONNECTORS AND

LOTS

FDD1: Floppy Disk C onne ctor

ID E1: Hard Disk C onne ctors

PEX16_1: PC I-Express x16 Slot

PEX1_1/PEX1_2: PC I-Express x1 Slots

PC I1~PC I3: Pe riphe ral Component Interconne ct Slots

OW TO

ETUP

UMPERS

ETAIL

ETTINGS

JPANEL1: Front Panel Heade r

JATXPW R1: ATX Powe r Source C onne ctor

JATXPW R2: ATX Powe r Source C onne ctor

JUSB3/JUSB4: Heade rs for USB 2.0 Ports at Front Panel

JAUDIO F1: Front Panel Audio Heade r

JC DIN1: CD-RO M Audio-in Connector

JC MO S1: Cle ar C MOS Heade r

※ Clear CMOS Procedures:

JC I1: Chassis O pen Heade r (Optional)

SATA1~SATA4: Se rial ATA Connectors

JSPDIF_O UT: Digital Audio out C onne ctors

RIVER

NSTALLATION

OTE

WARD

EEP

ODE

XTRA

NFORMATION

ROUBLESHOOTING

WARPSPEEDER™

NTRODUCTION

YSTEM

EQUIREMENT