A55MD2 / A55MG2 / A55ML2 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be responsible for any mistakes found in this user’s manual. All the brand and product names are trademarks of their respective companies.

Dichiarazione di conformità sintetica

Ai sensi dell’art. 2 comma 3 del D.M.

275 del 30/10/2002

Si dichiara che questo prodotto è conforme alle normative vigenti e soddisfa i requisiti essenziali richiesti dalle direttive

Short Declaration of conformity

We declare this product is complying with the laws in force and meeting all the essential requirements as specified by the directives

2004/108/CE, 2006/95/CE and

1999/05/CE whenever these laws may be applied

2004/108/CE, 2006/95/CE e

1999/05/CE quando ad esso applicabili

Table of Contents

Chapter 1: Introduction ...............................................................1

1.1

1.2

1.3

1.4

1.5

Before You Start......................................................................... 1

Package Checklist ..................................................................... 1

Motherboard Specifications ....................................................... 2

Rear Panel Connectors ............................................................. 3

Motherboard Layout .................................................................. 4

Chapter 2: Hardware Installation................................................5

2.1

Install Central Processing Unit (CPU) ....................................... 5

2.2

2.3

2.4

2.5

2.6

2.7

Install a Heatsink ....................................................................... 6

Connect Cooling Fans............................................................... 7

Install System Memory .............................................................. 8

Expansion Slots....................................................................... 10

Jumper Setting .........................................................................11

Headers & Connectors ............................................................ 12

Chapter 3: UEFI BIOS & Software.............................................16

3.1

UEFI BIOS Setup .................................................................... 16

3.2

3.3

BIOS Update ........................................................................... 16

Software................................................................................... 21

Chapter 4: Useful Help ..............................................................23

4.1

Driver Installation..................................................................... 23

4.2

4.3

4.4

4.5

AMI BIOS Beep Code.............................................................. 24

Troubleshooting....................................................................... 24

RAID Functions ....................................................................... 26

AMD DUAL Graphics Technology ........................................... 29

Appendix: Specifications In Other Languages .......................32

Arabic ......................................................................................................... 32

French ........................................................................................................ 34

German....................................................................................................... 36

Italian .......................................................................................................... 38

Japanese .................................................................................................... 40

Polish.......................................................................................................... 42

Portuguese ................................................................................................. 44

Russian....................................................................................................... 46

Spanish....................................................................................................... 48

A55MD2 / A55MG2 / A55ML2

CHAPTER 1: INTRODUCTION

1.1 Before You Start

Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below:

„ Prepare a dry and stable working environment with sufficient lighting.

„ Always disconnect the computer from power outlet before operation.

„ Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.

„

Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, do not try to bend or flex the board.

„ Do not leave any unfastened small parts inside the case after installation. Loose parts will cause short circuits which may damage the equipment.

„ Keep the computer from dangerous area, such as heat source, humid air and water.

„ The operating temperatures of the computer should be 0 to

45 degrees Celsius.

„ To avoid injury, be careful of:

Sharp pins on headers and connectors

Rough edges and sharp corners on the chassis

Damage to wires that could cause a short circuit

;

Serial ATA Cable x2

; Rear I/O Panel for ATX Case x1

; Installation Guide x1

; Fully Setup Driver DVD x1

Note:

The package contents may be different due to the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales representative.

1

Motherboard Manual

CPU Support

Chipset

Memory

Storage

LAN

Audio Codec

USB

Expansion Slots

Rear I/Os

Specifications

Socket FM2 for AMD A-series/ E2-series processor

Maximum CPU TDP (Thermal Design Power): 100Watt

* Please refer to www.biostar.com.tw

for CPU support list.

AMD A55 FCH

Supports Dual Channel DDR3 800/ 1066/ 1333/ 1600/ 1866

2 x DDR3 DIMM Memory Slot, Max. Supports up to 32 GB Memory

Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 module

* Please refer to www.biostar.com.tw

for Memory support list.

AMD A55 FCH

4x SATA 3Gb/s Connector

Supports RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability

Realtek RTL 8105E (A55ML2)

10/ 100 Mb/s auto negotiation, Half / Full duplex capability

ALC662

5.1 Channels, High Definition Audio

AMD A55 FCH

8x USB 2.0 port (4 on rear I/Os and 4 via internal headers)

1x PCI Slot

1x PCIe 2.0 x16 Slot

1x PS/2 Mouse

1x PS/2 Keyboard

1x VGA Port

1x DVI Port (A55MD2)

1x LAN port

4x USB 2.0 Port

3x Audio Jack

2

A55MD2 / A55MG2 / A55ML2

Specifications

Internal I/Os

Form Factor

OS Support

4x SATA 3.0Gb/s Connector

2x USB 2.0 Header (each header supports 2 USB 2.0 ports)

1x 4-Pin Power Connector

1x 24-Pin Power Connector

1x CPU Fan Connector

1x System Fan Connector

1x Front Panel Header

1x Front Audio Header

1x Clear CMOS Header

1x Printer Port Header

1x Serial Port Header microATX Form Factor, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Biostar reserves the right to add or remove support for any OS with or without notice.

1.4 Rear Panel Connectors

Note 1:

DVI-D / VGA Output require an AMD family processor with intedrated graphics.

Note 2:

The mainboard supports two independent display outputs.

Note 3:

Since the audio chip supports High Definition Audio Specification, the function of each audio jack can be defined by software. The input / output function of each audio jack listed above represents the default setting. However, when connecting external microphone to the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.

Note 4:

Maximum resolution:

Outputs

DVI-D

VGA

Maximum resolution

1920 x 1200 @60Hz

2560 x 1600 @60Hz

1920 x 1600 @60Hz

Bit Depth

30 bpp

24 bpp

--

3

Motherboard Manual

4

Note: ■ represents the 1st pin.

A55MD2 / A55MG2 / A55ML2

CHAPTER 2: HARDWARE INSTALLATION

2.1 Install Central Processing Unit (CPU)

Step 1:

Locate the CPU socket on the motherboard

Step 2:

Pull the socket locking out from the socket and then raise the lever up to a 90-degree angel.

Step 3:

Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.

Note:

The CPU fits only in one correct orientation. Do not force the CPU into the socket to prevent damaging the CPU.

5

Motherboard Manual

Step 4:

Hold the CPU down firmly, and then close the lever to locked the position

Step 1:

Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the mounting-lug.

Step 2:

On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops.

6

Note1:

Do not forget to connect the CPU fan connector.

Note2:

For proper installation, please kindly refer to the installation manual of your CPU heatsink.

A55MD2 / A55MG2 / A55ML2

These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.

CPU_FAN1: CPU Fan Header

Pin Assignment

1 Ground

2 +12V

3

FAN RPM rate sense

4 Smart Fan Control

(By Fan)

SYS_FAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V

3

FAN RPM rate sense

Note:

CPU_FAN1, SYS_FAN1 support 4-pin and 3-pin head connectors. When connecting with wires onto connectors, please note that the red wire is the positive and should be connected to pin#2, and the black wire is Ground and should be connected to GND.

7

Motherboard Manual

A. DDR3 Modules

Step 1:

Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.

Step 2:

Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.

8

Note:

If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.

A55MD2 / A55MG2 / A55ML2

B. Memory Capacity

DIMM Socket Location

DDR3 Module

DDR3_A1 512MB/1GB/2GB/4GB/8GB/16GB

DDR3_B1 512MB/1GB/2GB/4GB/8GB/16GB

Total Memory Size

Max is 32GB.

C. Dual Channel Memory Installation

Please refer to the following requirements to activate Dual Channel function:

Install memory module of the same density in pairs, shown in the table.

Dual Channel Status DDR3_A1 DDR3_B1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed, X means memory not installed.)

Note:

The DRAM bus width of the memory module must be the same (x8 or x16)

D. DDR Speed Support

Please refer to the following table for DDR speed reference:

1.50V 1.35V 1.25V

DDR3-1866 DDR3-1600 DDR3-1333

9

Motherboard Manual

10

PEX16_1: PCI-Express Gen2 x16 Slot

-

-

-

PCI-Express 2.0 compliant.

Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally.

PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins.

PCI1: Peripheral Component Interconnect Slot

This motherboard is equipped with 1 standard PCI slot. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for expansion cards.

Install an Expansion Card

4.

5.

6.

You can install your expansion card by following steps:

1. Read the related expansion card's instruction document before install the expansion card into the computer.

2.

3.

Remove your computer's chassis cover, screws and slot bracket from the computer.

Place a card in the expansion slot and press down on the card until it is completely seated in the slot.

7.

Secure the card’s metal bracket to the chassis back panel with a screw.

Replace your computer's chassis cover.

Power on the computer, if necessary, change BIOS settings for the expansion card.

Install related driver for the expansion card.

A55MD2 / A55MG2 / A55ML2

The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.

JCMOS1: Clear CMOS Header

Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard.

1 3

Pin 1-2 Close:

Normal Operation (default).

1 3

Pin 2-3 Close:

Clear CMOS data.

※

Clear CMOS Procedures:

1.

2.

3.

Remove AC power line.

Set the jumper to “Pin 2-3 close”.

Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5.

Power on the AC.

6.

Load Optimal Defaults and save settings in CMOS.

11

Motherboard Manual

2.7 Headers & Connectors

ATXPWR1: ATX Power Source Connector

This connector allows user to connect 24-pin power connector on the ATX power supply.

Pin Assignment

13 +3.3V

14 -12V

15 Ground

16 PS_ON

17 Ground

18 Ground

19 Ground

20 NC

21 +5V

22 +5V

23 +5V

24 Ground

Pin Assignment

1 +3.3V

2 +3.3V

3 Ground

4 +5V

5 Ground

6 +5V

7 Ground

8 PW_OK

10 +12V

11 +12V

12 +3.3V

ATXPWR2: ATX Power Source Connector

This connector will provide +12V to CPU power circuit.

Pin Assignment

1 +12V

2 +12V

3 Ground

4 Ground

12

Note1:

Before you power on the system, please make sure that both ATXPWR1 and

ATXPWR2 connectors have been plugged-in.

Note2:

Insufficient power supplied to the system may result in instability or the peripherals not functioning properly. Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices.

A55MD2 / A55MG2 / A55ML2

PANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.

Pin Assignment Function Pin

1 +5V

2 N/A

3 N/A

Speaker

Connector

10

11

Assignment

9 N/A

N/A

N/A

Function

N/A

N/A

4 Speaker

5

6

HDD LED (+)

HDD LED (-)

Hard drive LED

7 Ground

Reset button

12

13

14

15

16

Power LED (+)

Power LED (+)

Power LED (-)

Ground

Power LED

SATA1~SATA4: Serial ATA 3.0 Gb/s Connectors

These connectors connect to SATA hard disk drives via SATA cables.

Pin Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

7 Ground

13

Motherboard Manual

F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel, and also can be connected with a wide range of simultaneously accessible external Plug and Play peripherals.

Pin Assignment

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 NC

10 Key

F_AUDIO1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector.

14

HD Audio

Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

AC’97

Pin Assignment

1 Mic In

2 Ground

3 Mic Power

5 RT Line Out

7 Reserved

8

9

Key

LFT Line Out

8

9

Key

Left line in

Note1:

It is recommended that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high definition audio capability.

Note2:

Please try to disable the "Front Panel Jack Detection" if you want to use an

AC'97 front audio output cable. The function can be found via O.S. Audio Utility.

J_COM1: Serial Port Connector

A55MD2 / A55MG2 / A55ML2

The motherboard has a Serial Port Connector for connecting RS-232 Port.

Pin

5

6

7

3

4

1

2

Assignment

Carrier detect

Received data

Transmitted data

Data terminal ready

Signal ground

Data set ready

Request to send

10 NC

J_PRINT1: Printer Port Connector

This header allows you to connector printer on the PC.

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

0 16 Ground

7

6 -Init 19 -ACK

8 -Scltin 21 Busy

3 22 Ground

10 Ground 23 PE

12 Ground 25 SCLT

13 Data Key

15

Motherboard Manual

CHAPTER 3: UEFI BIOS & SOFTWARE

3.1 UEFI BIOS Setup

„ For better system performance, the UEFI BIOS firmware is being continuously updated. The UEFI BIOS information described below in this manual is for your reference only and the actual UEFI BIOS information and settings on board may be different from this manual

„ For further information of setting up the UEFI BIOS, please refer to the

UEFI BIOS Manual in the Setup DVD.

There are three ways to update the BIOS:

BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

1. BIOS Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2.

Download the proper BIOS from www.biostar.com.tw

.

3. Open BIOS Update Utility and click the

Update BIOS

button on the main screen.

4. A warning message will show up to request your agreement to start the BIOS update. Click

OK

to start the update procedure.

5. Choose the location for your

BIOS file in the system. Please select the proper BIOS file, and then click on

Open

. It will take several minutes, please be patient.

16

6. After the BIOS Update process is finished, click on

OK

to reboot the system.

A55MD2 / A55MG2 / A55ML2

7. While the system boots up and the full screen logo shows up, please press the <Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the

Save & Exit

, using the

Restore

Defaults

function to load Optimized Defaults, and select

Save Changes and

Reset

to restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on the main screen for the backup of BIOS, and select a proper location for your backup BIOS file in the system, and click

Save

.

17

Motherboard Manual

2. Online Update Utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Please make sure the system is connected to the internet before using this function.

3. Open BIOS Update Utility and click the

Online Update

button on the main screen.

4. An open dialog will show up to request your agreement to start the BIOS update. Click

Yes

to start the online update procedure.

5. If there is a new BIOS version, the utility will ask you to download it. Click

Yes

to proceed.

6. After the download is completed, you will be asked to program (update) the BIOS or not. Click

Yes

to proceed.

7. After the updating process is finished, you will be asked you to reboot the system. Click

OK

to reboot.

18

A55MD2 / A55MG2 / A55ML2

8. While the system boots up and the full screen logo shows up, press

<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the

Save & Exit

, using the

Restore

Defaults

function to load Optimized Defaults, and select

Save Changes and

Reset

to restart the computer. Then, the BIOS Update is completed.

3. BIOSTAR BIOS Flasher

BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive.

Note1:

This utility only allows storage device with FAT32/16 format and single partition.

Note2:

Shutting down or resetting the system while updating the BIOS will lead to system boot failure.

The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility,

press

<F12> during the Power-On Self Tests (POST)

procedure while booting up.

Updating BIOS with BIOSTAR BIOS Flasher

1. Go to the website to download the latest BIOS file for the motherboard.

2. Then, copy and save the BIOS file into a USB flash (pen) drive.

3. Insert the USB pen drive that contains the BIOS file to the USB port.

4. Power on or reset the computer and then press

<F12>

during the

POST

process.

5. After entering the POST screen, the BIOS-FLASHER utility pops out. Choose [fs0] to search for the BIOS file.

19

Motherboard Manual

6. Select the proper BIOS file, and a message asking if you are sure to flash the BIOS file.

Click Yes to start updating

BIOS.

7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the

[Y] key to restart system.

8. While the system boots up and the full screen logo shows up, press

<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the

Save & Exit

, using the

Restore

Defaults

function to load Optimized Defaults, and select

Save Changes and

Reset

to restart the computer. Then, the BIOS Update is completed.

20

A55MD2 / A55MG2 / A55ML2

3.3 Software

Installing Software

1. Insert the Setup DVD to the optical drive. The driver installation program would appear if the Autorun function has been enabled.

2. Select , and then click on the respective software title.

3. Follow the on-screen instructions to complete the installation.

Note1:

All the information and content about following software are subject to be changed without notice. For better performance, the software is being continuously updated.

Note2:

The information and pictures described below are for your reference only. The actual information and settings on board may be slightly different from this manual.

Launching Software

After the installation process is completed, you will see the software icon showing on the desktop. Double-click the icon to launch it.

eHot-Line (Optional)

eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.

Note:

Before you use this utility, please set Outlook Express as your default e-mail client application program.

* must provide. Without this information, you may not be able to send out the mail.

This block will show the information which would be collected in the mail.

*

Describe condition of your system.

* Select your area or the area close to you.

Provide the e-mail address that you would like to send the copy to.

*

Provide the name of the memory module manufacturer.

Send the mail out.

Exit this dialog.

Save these information to a .txt file

Provide the name of the power supply manufacturer and the model no.

21

Motherboard Manual

After filling up this information, click “

Send

” to send the mail out. A warning dialog would appear asking for your confirmation; click

“

Send

” to confirm or “

Do Not Send

” to cancel.

If you want to save this information to a .txt file, click “

Save As…

” and then you will see a saving dialog appears asking you to enter file name.

Enter the file name and then click “

Save

”.

Your system information will be saved to a .txt file.

Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.

Note1:

We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.

Note2:

If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar.com.tw/app/en/about/contact.php

for getting our contact information.

22

CHAPTER 4: USEFUL HELP

A55MD2 / A55MG2 / A55ML2

After you installed your operating system, please insert the Fully Setup Driver

DVD into your optical drive and install the driver for better system performance.

You will see the following window after you insert the DVD

The setup guide will auto detect your motherboard and operating system.

Note:

If this window didn’t show up after you insert the Driver DVD, please use file browser to locate and execute the file SETUP.EXE under your optical drive.

A. Driver Installation

To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.

B. Software Installation

To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.

C. Manual

Aside from the paperback manual, we also provide manual in the Driver DVD.

Click on the Manual icon to browse for available manual.

Note:

You will need Acrobat Reader to open the manual file. Please download the latest version of Acrobat Reader software from http://get.adobe.com/reader/

23

Motherboard Manual

4.2 AMI BIOS Beep Code

Boot Block Beep Codes

Number of Beeps

Continuing

Description

Memory sizing error or Memory module not found

POST BIOS Beep Codes

Number of Beeps Description

8 Display memory error (system video adapter)

4.3 Troubleshooting

Probable Solution

1. There is no power in the system.

Power LED does not shine; the fan of the power supply does not work

1. Make sure power cable is securely plugged in.

2. Indicator light on keyboard does not shine.

3. Contact technical support.

System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running.

Using even pressure on both ends of the

DIMM, press down firmly until the module snaps into place.

System does not boot from a hard disk drive, but can be booted from optical drive.

1. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the drive type in the standard

CMOS setup.

2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time.

System only boots from an optical drive. Hard disks can be read, applications can be used, but system fails to boot from a hard disk.

1. Back up data and applications files.

2. Reformat the hard drive. Re-install applications and data using backup disks.

Screen message shows “Invalid

Configuration” or “CMOS Failure.”

System cannot boot after user installs a second hard drive.

Review system’s equipment. Make sure correct information is in setup.

1. Set master/slave jumpers correctly.

2. Run SETUP program and select correct drive types. Call the drive manufacturers for compatibility with other drives.

24

A55MD2 / A55MG2 / A55ML2

CPU Overheated

If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated.

When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:

1. The CPU cooler surface is placed evenly with the CPU surface.

2. CPU fan is rotated normally.

3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.

1. Remove the power cord from power supply for seconds.

2. Wait for seconds.

3. Plug in the power cord and boot up the system.

Or you can:

1. Clear the CMOS data.

(See “Close CMOS Header: JCMOS1” section)

2. Wait for seconds.

3. Power on the system again.

25

Motherboard Manual

Operating System

Supports Windows Vista , Windows 7 and Windows 8.

Raid Arrays

RAID supports the following types of RAID arrays:

RAID 0:

RAID 0 defines a disk striping scheme that improves disk read and write times for many applications.

RAID 1:

RAID 1 defines techniques for mirroring data.

RAID 10:

RAID 10 combines the techniques used in RAID 0 and RAID 1.

RAID Definitions

RAID 0:

The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.

Features and Benefits

­

Drives:

Minimum 2, and maximum is up to 6 or 8. Depending on the platform.

­

Uses:

Intended for non-critical data requiring high data throughput, or any environment that does not require fault tolerance.

­

Benefits:

provides increased data throughput, especially for large files. No capacity loss penalty for parity.

­

Drawbacks:

Does not deliver any fault tolerance. If any drive in the array fails, all data is lost.

­

Fault Tolerance:

No.

­

Total Capacity:

(Minimal. HDD Capacity) x (Connected HDDs Amount)

26

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6

A55MD2 / A55MG2 / A55ML2

RAID 1:

Every read and write is actually carried out in parallel across 2 disk drives in a

RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.

RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.

Features and Benefits

­

Drives:

Minimum 2, and maximum is 2.

­

Uses:

RAID 1 is ideal for small databases or any other application that requires fault tolerance and minimal capacity.

­

Benefits:

Provides 100% data redundancy. Should one drive fail, the controller switches to the other drive.

­

Drawbacks:

Requires 2 drives for the storage space of one drive.

Performance is impaired during drive rebuilds.

­

Fault Tolerance:

Yes.

Block 1

Block 2

Block 3

Block 1

Block 2

Block 3

27

Motherboard Manual

RAID 10:

RAID 1 drives can be stripped using RAID 0 techniques.Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance.

Features and Benefits

­

Drives:

Minimum 4, and maximum is 6 or 8, depending on the platform.

­

Benefits:

Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.

­

Drawbacks:

Requires twice the available disk space for data redundancy, the same as RAID level 1.

­

Fault Tolerance:

Yes.

Block 1

Block 3

Block 5

Block 1

Block 3

Block 5

Block 2

Block 4

Block 6

Block 2

Block 4

Block 6

28

A55MD2 / A55MG2 / A55ML2

4.5 AMD DUAL Graphics Technology

AMD Dual Graphics Technology Introduction

When user adds a PCIE display adapter, it can be integrated with IGD to show better performance. To make the two video devices work simultaneously and normally, please refer to the following setting.

AMD Dual Graphics Requirement

„ Operating System: Windows Vista / Windows 7 / Windows 8

„

Supported Dual Graphics Combinations:

AMD Radeon ™ Graphics Card

HD 6670

HD 6570

A10-Series

HD 7660D

●

●

HD 6450

●

Recommended graphics cards for AMD dual-graphics

A8-Series

HD7560D

●

●

A6-Series

HD 7540D

●

●

Note 1:

A4-Series products do not support Dual Graphics.

Note 2:

The information described above in this manual is for your reference only and the actual information and settings on board may be different from this manual. For further AMD

Dual Graphics information, please visit the following website: http://www.amd.com

29

Motherboard Manual

AMD Dual Graphics Setup

Step 1:

Insert Dual Graphics-Ready graphics card into PEX16_1 slot.

Step 2:

Set the BIOS setting as follows:

[Chipset] → [North Bridge] → [GFX Configuration]

→ [Surround View] → [Enabled]

Step 3:

Install Driver DVD Chipset Driver, and reboot the system. Activate

AMD VISION Engine Control Center to make sure CrossFire has been enabled.

30

A55MD2 / A55MG2 / A55ML2

This page is intentionally left blank.

31

Motherboard Manual

APPENDIX: Specifications In Other Languages

Arabic

تﺎﻔﺻاﻮﻤﻟا

E 2 ﻞﺴﻠﺴﺗ / A ﻞﺴﻠﺴﺗ AMD ىد مإ ﻪﻳا ﺞﻟﺎﻌﻤﻟ FM 2 ﺬﺧﺄﻤﻟا

.

طاو 100 :( thermal design power – TDP ) ﺞﻟﺎﻌﻤﻟا ﻢﻴﻤﺼﺗ ﻲﻓ ﺔﻳراﺮﺤﻟا ﺔﻗﺎﻄﻠﻟ ﻰﺼﻗﻷا ﺪﺤﻟا

.

CPU ﺞﻟﺎﻌﻤﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ www.biostar.com.tw

ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ *

ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ةﺪﻋﺎﻗ

ﺔﻳﺰآﺮﻤﻟا

AMD A55 FCH

ىد مإ ﻪﻳا

1866 / 1600 / 1333 / 1066 / 800 DDR3 .

را .

يد .

يد ﺔﺟودﺰﻣ ةﺎﻨﻗ ﻢﻋﺪﺗ

ﺢﺋاﺮﺸﻟا ﺔﻋﻮﻤﺠﻣ

ةﺮآاذ ﺖﻳﺎﺑﺎﺠﻴﺟ 32 ﻰﺼﻗأ ﺪ ﺤآ ﻞﻤﺤﺘﺗ ، DIMM ﺔﺟودﺰﻤﻟا ةﺮآاﺬﻟا تﺎﺤﺘﻓ DDR3 .

را .

يد .

يد x 2

DDR3 را .

يد .

يد ﺖﻳﺎﺑﺎﺠﻴﺟ 16 / 8 / 4 / 2 / 1 / ﺖﻳﺎﺑ ﺎﺠﻴﻣ 512 ECC نود ﻞﻤﺤﺘﺗ DIMM ﺔﺟودﺰﻣ ﺔﺤﺘﻓ ﻞآ

.

ةﺮآاﺬﻟا ﻢﻋد ﺔﻤﺋﺎﻘﻟ www.biostar.com.tw

ﻊﻗﻮﻤﻟا ﻰﻟإ عﻮﺟﺮﻟا ﻰﺟﺮﻳ *

: FCH A55 AMD ىد مإ ﻪﻳا

ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑ ﺎﺠﻴﺟ 3 SATA ﺎﺗﺎﺳ x4 ﺔﻠﺻو

AHCI / 10 / 1 / 0 RAID ﺪﻳار ﻞﻤﺤﺘﺗ

(A55MD2, A55MG2), REALTEK RTL 8111F ل تر ﻚﻴﺘﻟﺎﻴﻳر

ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا / ﻒﺼﻨﻟا ، ﻲﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﻣ 1000 / 100 / 10

(A55ML2), REALTEK RTL 8105E ل تر ﻚﻴﺘﻟﺎﻴﻳر

ﺔﺟودﺰﻤﻟا ىﻮﺼﻘﻟا ةرﺪﻘﻟا / ﻒﺼﻨﻟا ، ﻲ ﺋﺎﻘﻠﺗ ﺪﻳﺪﺤﺗ ، ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﻣ 100 / 10

ALC662

ﺔﻗﺪﻟا ﺔﻴﻟﺎﻋ تاﻮﻨﻗ 5.1

ةﺮآاﺬﻟا

ﻦﻳﺰﺨﺘﻟا

LAN ﺔﻴﻠﺤﻣ ﺔﻜﺒﺷ

ﻲﺗﻮﺼﻟا ﺰﻴﻣﺮﺘﻟا

FCH AMD A55 ىد مإ ﻪﻳ

( ﻲﻠﺧاﺪﻟا عزﻮﻤﻟا لﻼﺧ ﻦﻣ 4 و ﺔﻴﻔﻠﺨﻟا جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا ﻲﻓ 4 ) 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ 8 x ﺬﻓﺎﻨﻣ

PCI ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ x 1

16 x 2.0

PCIe ﺔﻴﻓﺎﺿﻹا تﺎﻘﺤﻠﻤﻟا ﺬﻔﻨﻣ ﺔﺤﺘﻓ x 1

ةرﺎﻔﻟا PS/2 x 1

تﻮﻴﺒﻤﻜﻠﻟ ﺢﻴﺗﺎﻔﻤﻟا ﺔﺣﻮﻟ PS/2 x 1

VGA ﻲﺋﺮﻤﻟا ضﺮﻌﻟا ﺔﻣﻮﻈﻨﻣ x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

(A55MD2) DVI ﺔﻴﻤﻗر ﺔﻴﺋﺮﻣ ﺔﻬﺟاو x 1 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

LAN ﺔﻴﻠﺤﻤﻟ ا ﺔﻜﺒﺸﻟا x 1 دﺪﻋ ﻞﻴﺻﻮﺘﻟ ﺔﺤﺘﻓ

2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 4 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

تﻮﺼﻠﻟ كﺎﺟ x 3 دﺪﻋ ﻞﻴﺻﻮﺗ ﺔﺤﺘﻓ

مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ

USB

ﻊﺳﻮﺘﻟا تﺎﺤﺘﻓ

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻔﻠﺨﻟا

32

A55MD2 / A55MG2 / A55ML2

تﺎﻔﺻاﻮﻤﻟا

ﺔﻴﻧﺎﺜﻟا / ﺖﻳﺎﺑﺎﺠﻴﺟ 3 x SATA 4 ﺔﻠﺻو

( 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ ﻦﻴﺘﺤﺘﻓ ﻞﻤﺤﺘﻳ عزﻮﻣ ﻞآ ) 2.0

USB مﺎﻋ ﻞﺴﻠﺴﺘﻣ ﻞﻗﺎﻧ x 2 عزﻮﻣ

ﺲﻴﺑﺎﺑد 4 x 1 ﺔﻗﺎﻄﻠﻟ ﺔﻠﺻﻮﻣ

سﻮﺑد 24 x 1 ﺔﻗﺎﻄﻠﻟ ﺔ ﻠﺻو

ﺔﻳﺰآﺮﻤﻟا ﺔﺠﻟﺎﻌﻤﻟا ةﺪﺣو ﺪﻳﺮﺒﺗ ﺔﺣوﺮﻣ x 1 ﺔﻠﺻو

ﺔﻣﻮﻈﻨﻤﻟا ﺪﻳﺮﺒﺗ حواﺮﻣ x 1 ﺔﻠﺻو

ﺔﻴﻣﺎﻣﻷا ﺔﺣﻮﻠﻟا x 1 عزﻮﻣ

ﻲﻣﺎﻣﻷا تﻮﺼﻟا x 1 عزﻮﻣ

ﺮﺷﺎﺒﻣ سﻮﻤﻴﺳ x 1 عزﻮﻣ

ﺔﻌﺑﺎﻄﻠﻟ ﺔﺤﺘﻓ x 1 عزﻮﻣ

ﺔﻴﻠﺴﻠﺴﺗ ﺔﺤﺘﻓ x 1 عزﻮﻣ

ﻢﻣ 178 x ﻢﻣ 226 ، microATX ﺔﻣﺪﻘﺘﻤﻟا ﺎﻴﺟﻮﻟﻮﻨﻜﺘﻟا دﺪﻣ ﻞﻜﺷ ﻞﻣﺎﻋ

جرﺎﺨﻤﻟاو ﻞﺧاﺪﻤﻟا

ﺔﻴﻠﺧاﺪﻟا

ﻞﻜﺸﻟا ﻞﻣﺎﻋ

8 زوﺪﻨﻳو / 7 زوﺪﻨﻳو / ﺎﺘﺴﻴﻓ زوﺪﻨﻳو / windows xp ﻲﺑ ﺲآإ زوﺪﻨﻳو

.

رﺎﻈﻧأ نوﺪﺑ وأ ﻊﻣ ﻞﻴﻐﺸﺗ مﺎﻈﻧ يﻷ ﻢﻋﺪﻟا ﺔﻟزأ وأ ﺔﻓﺎﺿإ ﻖﺤﺑ ﻆﻔﺘﺤﺗ BIOSTAR رﺎﺘﺳﻮﻴﺑ

ﺔﻣﻮﻋﺪﻤﻟا ﻞﻴﻐﺸﺘﻟا ﺔﻤﻈﻧأ

33

Motherboard Manual

French

Support Unité

Centrale

Jeu de puces

Mémoire

Stockage

Réseau local

Codec audio

USB

Connecteur d’extension

I/O arrirèes

Spécifications

Interface de connexion FM2 pour série A AMD/processeur série E2

Enveloppe thermique Unité Centrale maximum : 100Watt

* Veuillez vous reporter à www.biostar.com.tw

pour la liste des supports modèles d'Unité Centrale.

AMD A55 FCH

Supporte mémoire DDR3 double canal 800/ 1066/ 1333/ 1600/ 1866

Banc de mémoire 2 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 32 GB

Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB

* Veuillez vous reporter à www.biostar.com.tw

pour la liste des soutien de la mémoire.

AMD A55 FCH

Connecteur 4 x SATA 3Gb/s

Supporte système RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée

Realtek RTL 8105E (A55ML2)

10/ 100 Mb/s auto négociation, capacité bidirectionnelle à l'alternat / bidirectionnelle simultanée

ALC662

Canaux 5.1, écoute audio de haute définition

AMD A55 FCH

Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne)

1x Fente PCI

1x PCIe 2.0 x16 Fente

1x PS/2 Clavier

1x PS/2 Souris

1x Port VGA

1x Port DVI (A55MD2)

1x port LAN

4x Port USB 2.0

3x entrées audio

34

I/O en interne

Facteur d'encombrement

Support SE

A55MD2 / A55MG2 / A55ML2

Spécifications

4x Connecteur SATA 3.0Gb/s

2x embases USB 2.0 (chaque embase supporte 2 Ports USB 2.0)

1x 4-Broche de carte

1x 24-Broche de carte

1x Connecteur ventilateur unité centrale

1x Connecteur ventilateur système

1x Fiche panneau avant

1x Fiche audio avant

1x Fiche mémoire CMOS vide

1x Embase port imprimante

1x Embase port série

Facteur d'encombrement microATX, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans préavis.

35

Motherboard Manual

German

Spezifikationen

CPU-Unterstützung

Chipset

Festplattenspeicher

Arbeitsspeicher

LAN

Audio-Codec

USB

Anschluss-FM2 für AMD A-Serie/ E2-Serie-Prozessor

Maximale CPU TDP (Thermal Design Power): 100 Watt

* Bitte konsultieren Sie www.biostar.com.tw

für CPU-Unterstützungsliste

AMD A55 FCH

Unterstützt zweikanaliges DDR3 800/ 1066/ 1333/ 1600/ 1866

2 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 32 GB-Speicher

Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3-Module

* Bitte konsultieren Sie www.biostar.com.tw

für für Speicherunterstützung Liste.

AMD A55 FCH:

4x SATA 3Gb-Verbindung

Unterstützt RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig

Realtek RTL 8105E (A55ML2)

10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig

ALC662

5.1 Kanäle, HD-Audio

AMD A55 FCH:

8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header)

Erweiterungsanschl

üsse

Hintere I/Os

1x PCI-Slot

1x PCIe 2.0 x16-Slot

1x PS/2-Maus

1x PS/2-Keyboard

1x VGA-Port

1x DVI-Port (A55MD2)

1x LAN-Port

4x USB 2.0-Port

3x Audio Jack

36

Interne I/Os

Formfaktor

OS-Unterstützung

A55MD2 / A55MG2 / A55ML2

Spezifikationen

4x SATA 3.0Gb/s-Verbinung

2x USB 2.0-Header (jeder Header unterstützt 2 USB 2.0-Ports)

1x 4-Pin-Stromverbindung

1x 24-Pin-Stromverbindung

1x CPU-Ventilatorverbindung

1x System-Ventilatorverbindung

1x Header für Frontpanel

1x Header für Frontaudio

1x Header für klares CMOS

1x Header für Druckerport

1x Serieller Port-Header microATX Formfaktor, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Biostar reserves the right to add or remove support for any OS with or without notice.

37

Motherboard Manual

Italian

Supporto processore

Tipo scheda

Memoria

Memorizzazione

Catena

Codec Audio

USB

Specificazioni

Slot FM2 per processore AMD serie-A / serie – E2

Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 100Watt

* Si prega di consultare www.biostar.com.tw

per la lista di supporto del processore.

AMD A55 FCH

Supporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doppio Canale

2 x DDR3 DIMM Slot di Memoria Supporta fino a 32 GB Memoria

Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 moduli

* Si prega di consultare www.biostar.com.tw

per la lista di supporto del memoria.

AMD A55 FCH:

Connettore 4x SATA 3Gb/s

Supporta RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo

Realtek RTL 8105E (A55ML2)

10/ 100 Mb auto negoziazione, capacita di duplex Meta / Completo

ALC662

Canali Audio di Alta Definizione 5.1

Piattaforma AMD A55 FCH:

Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni)

Slot di espansione

Slot 1x PCI

Slot 1x PCIe 2.0 x16

Ingressi/ Uscite

Posteriore

Mouse 1x PS/2

Tastiera 1x PS/2

Slot 1x VGA

Slot 1x DVI (A55MD2)

Slot 1x LAN

Slot 4x USB 2.0

Jack audio 3x

38

A55MD2 / A55MG2 / A55ML2

Specificazioni

Ingressi/ Uscite

Interni

Connettore 4x SATA 3.0Gb/s

Distributore 2x USB 2.0(ogni distributore supporta 2 slot USB 2.0)

Connettore con 4 pin x1

Connettore con 24 pin x1

Connettore Ventilatore processore x1

Connettore Ventilatore Sistema x1

Distributore Pannello Frontale x1

Distributore Audio Frontale x1

Distributore CMOS Diretto x1

Distributore Slot Stampante x1

Distributore Slot Serie x1

Fattore di Forma Fattore di Forma microATX, 226 mm x 178 mm

Supporto SO

Windows XP / Vista / 7/ 8

Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi

SO con o senza preavviso

.

39

Motherboard Manual

Japanese

CPU

サポート

チップセット

メモリ

保存スペース

LAN

オーディオ コーデ

ック

USB

仕様

AMD A-

シリーズ

/ E2-

シリーズ プロセッサの

Socket FM2

最大

CPU TDP

（

Thermal Design Power

最大放熱量）

:100 W

*CPU

サポート リストについては、 www.biostar.com.tw

を参照してください。

AMD A55 FCH

デュアルチャンネル

DDR3 800/ 1066/ 1333/ 1600/ 1866

をサポート

2 x DDR3 DIMM

メモリ スロット、 最大

32 GB

メモリまでサポート

各

DIMM

は、 非

-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3

モジュールをサポートしてい

ます

*

サポートされているメモリのリストについては、 www.biostar.com.tw

を参照してく

ださい。

AMD A55 FCH:

4x SATA 3Gb/s

コネクタ

RAID 0,1,10 & AHCI

のサポート

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb/s

オートネゴーシエーション、半

/

全 二重通信

Realtek RTL 8105E (A55ML2)

10/ 100 Mb/s

オートネゴーシエーション、半

/

全 二重通信

ALC662

5.1

チャンネル

,

ハイ デフィニション オーディオ

AMD A55 FCH:

8x USB 2.0

ポート

(

後部

I/O

に

4

つ 及び 内蔵ヘッダー経由に

4

つ

)

拡張スロット

後部

I/O

1x PCI

スロット

1x PCIe 2.0 x16

スロット

1x PS/2

キーボード

1x PS/2

マウス

1x VGA

ポート

1x DVI

ポート

(A55MD2)

1x LAN

ポート

4x USB 2.0

ポート

3x

オーディオ ジャック

40

A55MD2 / A55MG2 / A55ML2

仕様

内蔵

I/O

4x SATA 3.0Gb/s

コネクタ

2x USB 2.0

ヘッダー

(

各ヘッダーは、

2

つの

USB 2.0

ポートをサポートしています

)

1x 4-Pin

パワー コネクタ

1x 24-Pin

パワー コネクタ

1x CPU

ファン コネクタ

1x

システム ファン コネクタ

1x

フロント パネル ヘッダー

1x

フロント オーディオ ヘッダー

1x

クリア

CMOS

ヘッダー

1x

プリンター ポート ヘッダー

1x

シリアル ポート ヘッダー

フォーム ファクタ

microATX

ファクタ、

226 mm x 178 mm

Windows XP / Vista / 7/ 8

サポート

OS

Biostar

には、通知なしでサポート

OS

を変更する権限があります。

41

Motherboard Manual

Polish

Obs ł uga procesora

Rodzaj p ł yty

Pami ęć

Przechowywanie

LAN

Codec Audio

USB

Specyfikacje techniczne

Gniazdo procesora (Socket) FM2 dla procesorów AMD seria-A / seria – E2

Moc Wydzielanego Ciep ł a (TDP - Thermal Design Power): 100Watt

* Prosz ę sprawdzi ć list ę obs ł ugiwanych procesorów na stronie internetowej www.biostar.com.tw

AMD A55 FCH

Obs ł uga pami ę ci DDR3 800/ 1066/ 1333/ 1600/ 1866 Dwukana ł owa

2 x DDR3 DIMM Pami ęć Gniazda procesora (Slot), Maksymalna wielko ść pami ę ci 32

GB

Ka ż dy DIMM obs ł uguje jeden modu ł non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3

* Prosz ę sprawdzi ć list ę obs ł ugiwanych pami ęć na stronie internetowej www.biostar.com.tw

AMD A55 FCH:

Z łą cze 4x SATA 3Gb/s

Obs ł uga RAID 0,1,10 & AHCI

Uk ł ad RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb auto negocjacja, pojemno ść dupleks Po ł owe / Pe ł ny

Uk ł ad RTL 8105E (A55ML2)

10/ 100 Mb auto negocjacja, pojemno ść dupleks Po ł owe / Pe ł ny

ALC662

Kana ł y Audio wysokiej Definicji 5.1

P ł yta AMD A55 FCH:

8 x z łą cza USB 2.0 (4 przez tylne porty wej ś cia/ wyj ś cia oraz 4 przez wewn ę trzne porty)

Z łą cza rozszerze ń z łą cza 1x PCI (Slot) z łą cza 1x PCIe 2.0 x16 (Slot)

Myszka 1x PS/2

Klawiatura 1x PS/2

Tylne porty wej ś cia/ wyj ś cia

Port 1x VGA

Port 1x DVI (A55MD2)

Port 1x LAN

Porty 4x USB 2.0

Porty audio 3x

42

Wewn ę trzne porty wej ś cia/ wyj ś cia

Obudowa

Obs ł uga OS

A55MD2 / A55MG2 / A55ML2

Specyfikacje techniczne

Z łą cza 4x SATA 3.0Gb/s

Z łą cza 2x USB 2.0 (ka ż de z łą cze obs ł uguje dodatkowe 2 porty USB 2.0)

Z łą cza 4 pionowe x 1

Z łą cza 24 pionowe x 1

Z łą cze wentylatora CPU x 1

Z łą cze wentylatora obudowy x 1

Z łą cze przedniego panelu x1

Z łą cze audio przedniego panelu x1

Z łą cze bezpo ś rednie CMOS x1

Z łą cze port drukarki x1

Port szeregowy x1

Obudowa microATX, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Biostar zastrzega sobie prawo do dodania lub wycofania obs ł ugi dla OS, z wypowiedzeniem lub bez wypowiedzenia.

43

Motherboard Manual

Portuguese

Especificações

Suporte

Processador

Tipo Placa Mãe

Porta FM2 para processador AMD série-A / série – E2

Alimentação de Design Térmico (TDP – Thermal Design Power): 100Watt

* Por favor consulte www.biostar.com.tw

para obter uma lista de suporte do processador.

AMD A55 FCH

Memória

Suporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Canal Duplo

2 x DDR3 DIMM Slot de memória Suporta até 32 GB Memória

Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 módulo

* Por favor consulte www.biostar.com.tw

para obter uma lista de suporte do memória.

Armazenamento

LAN

Codec de Audio

USB

AMD A55 FCH:

Conector 4x SATA 3Gb/s

Suporta RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio

Realtek RTL 8105E (A55ML2)

10/ 100 Mb auto negociação, capacidade duplex Metade / Cheio

ALC662

Canais de Áudio de Alta Definição 5.1

Plataforma AMD A55 FCH:

Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)

Slots de expansão

Porta 1x PCI

Porta 1x PCIe 2.0 x16

Entradas/Saídas no painel traseiro

Mouse 1x PS/2

Teclado 1x PS/2

Porta 1x VGA

Porta 1x DVI

Porta 1x LAN

Porta 4x USB 2.0

Soquete audio 3x

44

Conectores na placa

Fator de Fôrma

Suporte OS

A55MD2 / A55MG2 / A55ML2

Especificações

Conector 4x SATA 3.0Gb/s

Dispositivo 2x USB 2.0 (cada Dispositivo suporta 2 portas USB 2.0)

Conector de 4 pinos x1

Conector de 24 pinos x1

Conector de Ventoinha processador x1

Conector de Ventoinha Sistema x1

Dispositivo Painel Frontal x1

Dispositivo de Audio Frontal x1

Dispositivo CMOS Direct x1

Dispositivo Porta Impressora x1

Dispositivo Porta Série x1

Fator de Fôrma microATX, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem notificação.

45

Motherboard Manual

Russian

Спецификации

Поддержка центрального процессора

Сокет FM2 для процессоров AMD серии A/ серии E2

Максимальный термопакет центрального процессора (TDP): 100 ватт

* Перечень поддержки центрального процессора смотрите на www.biostar.com.tw

.

Набор микросхем AMD A55 FCH

Память

Накопитель

Локальная сеть

Аудиокодек

USB

Поддерживает двухканальный DDR3 800/ 1066/ 1333/ 1600/ 1866

2 гнезда платы памяти DDR3 DIMM, максимальная память до 32 Гб

Каждый модуль DIMM поддерживает модуль не -ECC 512 Мб / 1/ 2/ 4/ 8/ 16 Гб

DDR3

* Перечень поддержки памяти смотрите на www.biostar.com.tw

.

AMD A55 FCH:

Соединитель 4x SATA 3 Гб / с

Поддерживает RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

Автосогласование 10/ 100/ 1000 Мб / с , работает в полно / полудуплексном режиме

Realtek RTL 8111F (A55ML2)

Автосогласование 10/ 100 Мб / с , работает в полно / полудуплексном режиме

ALC662

Каналы 5.1, высококачественное аудио

AMD A55 FCH:

8 портов USB 2.0 (4 сзади ввода вывода и 4 через внутренние контакты )

Гнезда расшир .

Задняя плата ввода вывода

1x гнезда PCI

1x PCIe 2.0 x16 гнездо

1 мышь PS/2

1 клавиатура PS/2

1 порт VGA

1 порт DVI (A55MD2)

1 порт локальной сети

4 порта USB 2.0

3 гнезд для подключения наушников

46

Внутр . Плата ввода вывода

Конструктив

Поддержка ОС

A55MD2 / A55MG2 / A55ML2

Спецификации

Соединитель 4x SATA 3 Гб / с

2 контакта USB 2.0 ( каждый контакт поддерживает 2 порта USB 2.0)

1 4выводный разъем питания

1 24выводный разъем питания

1 разъем вентилятора ЦП

1 разъема вентилятора системы

1 контакт передней панели

1 контакт передней аудиопанели

1 контакт микросхемы Clear CMOS

1 контакт порта принтера

1 контакт последовательного порта

Форм фактор microATX, 226 мм x 178 мм

Windows XP / Vista / 7/ 8

Biostar оставляет за собой право добавлять или удалять поддержку любой ОС , с уведомлением или без .

47

Motherboard Manual

Spanish

Compatibilidad con el procesador

Tipo de Placa

Memoria

Almacenamiento de información

LAN

Códec Audio

USB

Especificaciones

Ranura FM2 para procesador AMD serie - A / serie – E2

Alimentación de Proyección Térmica (TDP – Thermal Design Power): 100Watt

*Por favor consultar con www.biostar.com.tw

para la lista de compatibilidad con el procesador.

AMD A55 FCH

Soporta DDR3 800/ 1066/ 1333/ 1600/ 1866 Doble Canal

2x DDR3 DIMM Ranura de memoria Soporta hasta 32 GB Memoria

Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3

*Por favor consultar con www.biostar.com.tw

para la lista de compatibilidad con el memoria.

AMD A55 FCH:

Conector 4x SATA 3Gb/s

Soporta RAID 0,1,10 & AHCI

Realtek RTL 8111F (A55MD2, A55MG2)

10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo

Realtek RTL 8105E (A55ML2)

10/ 100 Mb/s auto negociación, capacidad dúplex Mitad/Completo

ALC662

Canales Audio de Alta Definición 5.1

Plataforma AMD A55 FCH:

Ranura 8x USB 2.0 (4 en las entradas/salidas posteriores y 4 por los distribuidores internos)

Ranuras de

Extinción

Panel trasero de

E/S

Ranura 1x PCI

Ranura 1x PCIe 2.0 x16

Ratón 1x PS/2

Teclado 1x PS/2

Ranura 1x VGA

Ranura 1x DVI (A55MD2)

Ranura 1x LAN

Ranura 4x USB 2.0

Socket audio 3x

48

A55MD2 / A55MG2 / A55ML2

Especificaciones

Conectores en placa

Conector 4x SATA 3Gb’s

Distribuidor 2x USB 2.0 (cada distribuidor soporta 2 ranuras USB 2.0)

Conector con 4 patillas x1

Conector con 24 patillas x1

Conector Ventilador procesador x1

Conector Ventilador Sistema x1

Distribuidor Panel Frontal x1

Distribuidor Audio Frontal x1

Distribuidor CMOS Directo x1

Distribuidor Ranura Impresora x1

Distribuidor Ranura Serie x1

Factor de Forma Factor de Forma microATX, 226 mm x 178 mm

Windows XP / Vista / 7/ 8

Soporte OS

Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin notificación.

2012/12/12

49